diff --git a/[refs] b/[refs]
index 90bb14b5c415..124e49c01f56 100644
--- a/[refs]
+++ b/[refs]
@@ -1,2 +1,2 @@
---
-refs/heads/master: e84542f5db655d1ce7b4890832f0e5d19aae965d
+refs/heads/master: d7511ec8115487ccea2ce93bf58d5e5cd2c1c0a3
diff --git a/trunk/Documentation/DocBook/scsi.tmpl b/trunk/Documentation/DocBook/scsi.tmpl
index f299ab182bbe..10a150ae2a7e 100644
--- a/trunk/Documentation/DocBook/scsi.tmpl
+++ b/trunk/Documentation/DocBook/scsi.tmpl
@@ -12,7 +12,7 @@
Bottomley
- James.Bottomley@steeleye.com
+ James.Bottomley@hansenpartnership.com
diff --git a/trunk/Documentation/scsi/ChangeLog.arcmsr b/trunk/Documentation/scsi/ChangeLog.arcmsr
index cd8403a33ee6..de2bcacfa870 100644
--- a/trunk/Documentation/scsi/ChangeLog.arcmsr
+++ b/trunk/Documentation/scsi/ChangeLog.arcmsr
@@ -68,4 +68,45 @@
** 2. modify the arcmsr_pci_slot_reset function
** 3. modify the arcmsr_pci_ers_disconnect_forepart function
** 4. modify the arcmsr_pci_ers_need_reset_forepart function
+** 1.20.00.15 09/27/2007 Erich Chen & Nick Cheng
+** 1. add arcmsr_enable_eoi_mode() on adapter Type B
+** 2. add readl(reg->iop2drv_doorbell_reg) in arcmsr_handle_hbb_isr()
+** in case of the doorbell interrupt clearance is cached
+** 1.20.00.15 10/01/2007 Erich Chen & Nick Cheng
+** 1. modify acb->devstate[i][j]
+** as ARECA_RAID_GOOD instead of
+** ARECA_RAID_GONE in arcmsr_alloc_ccb_pool
+** 1.20.00.15 11/06/2007 Erich Chen & Nick Cheng
+** 1. add conditional declaration for
+** arcmsr_pci_error_detected() and
+** arcmsr_pci_slot_reset
+** 1.20.00.15 11/23/2007 Erich Chen & Nick Cheng
+** 1.check if the sg list member number
+** exceeds arcmsr default limit in arcmsr_build_ccb()
+** 2.change the returned value type of arcmsr_build_ccb()
+** from "void" to "int"
+** 3.add the conditional check if arcmsr_build_ccb()
+** returns FAILED
+** 1.20.00.15 12/04/2007 Erich Chen & Nick Cheng
+** 1. modify arcmsr_drain_donequeue() to ignore unknown
+** command and let kernel process command timeout.
+** This could handle IO request violating max. segments
+** while Linux XFS over DM-CRYPT.
+** Thanks to Milan Broz's comments
+** 1.20.00.15 12/24/2007 Erich Chen & Nick Cheng
+** 1.fix the portability problems
+** 2.fix type B where we should _not_ iounmap() acb->pmu;
+** it's not ioremapped.
+** 3.add return -ENOMEM if ioremap() fails
+** 4.transfer IS_SG64_ADDR w/ cpu_to_le32()
+** in arcmsr_build_ccb
+** 5. modify acb->devstate[i][j] as ARECA_RAID_GONE instead of
+** ARECA_RAID_GOOD in arcmsr_alloc_ccb_pool()
+** 6.fix arcmsr_cdb->Context as (unsigned long)arcmsr_cdb
+** 7.add the checking state of
+** (outbound_intstatus & ARCMSR_MU_OUTBOUND_HANDLE_INT) == 0
+** in arcmsr_handle_hba_isr
+** 8.replace pci_alloc_consistent()/pci_free_consistent() with kmalloc()/kfree() in arcmsr_iop_message_xfer()
+** 9. fix the release of dma memory for type B in arcmsr_free_ccb_pool()
+** 10.fix the arcmsr_polling_hbb_ccbdone()
**************************************************************************
diff --git a/trunk/Documentation/scsi/scsi_mid_low_api.txt b/trunk/Documentation/scsi/scsi_mid_low_api.txt
index 6f70f2b9327e..a6d5354639b2 100644
--- a/trunk/Documentation/scsi/scsi_mid_low_api.txt
+++ b/trunk/Documentation/scsi/scsi_mid_low_api.txt
@@ -1407,7 +1407,7 @@ Credits
=======
The following people have contributed to this document:
Mike Anderson
- James Bottomley
+ James Bottomley
Patrick Mansfield
Christoph Hellwig
Doug Ledford
diff --git a/trunk/Documentation/vm/slabinfo.c b/trunk/Documentation/vm/slabinfo.c
index 488c1f31b992..7123fee708ca 100644
--- a/trunk/Documentation/vm/slabinfo.c
+++ b/trunk/Documentation/vm/slabinfo.c
@@ -32,6 +32,13 @@ struct slabinfo {
int sanity_checks, slab_size, store_user, trace;
int order, poison, reclaim_account, red_zone;
unsigned long partial, objects, slabs;
+ unsigned long alloc_fastpath, alloc_slowpath;
+ unsigned long free_fastpath, free_slowpath;
+ unsigned long free_frozen, free_add_partial, free_remove_partial;
+ unsigned long alloc_from_partial, alloc_slab, free_slab, alloc_refill;
+ unsigned long cpuslab_flush, deactivate_full, deactivate_empty;
+ unsigned long deactivate_to_head, deactivate_to_tail;
+ unsigned long deactivate_remote_frees;
int numa[MAX_NODES];
int numa_partial[MAX_NODES];
} slabinfo[MAX_SLABS];
@@ -64,8 +71,10 @@ int show_inverted = 0;
int show_single_ref = 0;
int show_totals = 0;
int sort_size = 0;
+int sort_active = 0;
int set_debug = 0;
int show_ops = 0;
+int show_activity = 0;
/* Debug options */
int sanity = 0;
@@ -93,8 +102,10 @@ void usage(void)
printf("slabinfo 5/7/2007. (c) 2007 sgi. clameter@sgi.com\n\n"
"slabinfo [-ahnpvtsz] [-d debugopts] [slab-regexp]\n"
"-a|--aliases Show aliases\n"
+ "-A|--activity Most active slabs first\n"
"-d|--debug= Set/Clear Debug options\n"
- "-e|--empty Show empty slabs\n"
+ "-D|--display-active Switch line format to activity\n"
+ "-e|--empty Show empty slabs\n"
"-f|--first-alias Show first alias\n"
"-h|--help Show usage information\n"
"-i|--inverted Inverted list\n"
@@ -281,8 +292,11 @@ int line = 0;
void first_line(void)
{
- printf("Name Objects Objsize Space "
- "Slabs/Part/Cpu O/S O %%Fr %%Ef Flg\n");
+ if (show_activity)
+ printf("Name Objects Alloc Free %%Fast\n");
+ else
+ printf("Name Objects Objsize Space "
+ "Slabs/Part/Cpu O/S O %%Fr %%Ef Flg\n");
}
/*
@@ -309,6 +323,12 @@ unsigned long slab_size(struct slabinfo *s)
return s->slabs * (page_size << s->order);
}
+unsigned long slab_activity(struct slabinfo *s)
+{
+ return s->alloc_fastpath + s->free_fastpath +
+ s->alloc_slowpath + s->free_slowpath;
+}
+
void slab_numa(struct slabinfo *s, int mode)
{
int node;
@@ -392,6 +412,71 @@ const char *onoff(int x)
return "Off";
}
+void slab_stats(struct slabinfo *s)
+{
+ unsigned long total_alloc;
+ unsigned long total_free;
+ unsigned long total;
+
+ if (!s->alloc_slab)
+ return;
+
+ total_alloc = s->alloc_fastpath + s->alloc_slowpath;
+ total_free = s->free_fastpath + s->free_slowpath;
+
+ if (!total_alloc)
+ return;
+
+ printf("\n");
+ printf("Slab Perf Counter Alloc Free %%Al %%Fr\n");
+ printf("--------------------------------------------------\n");
+ printf("Fastpath %8lu %8lu %3lu %3lu\n",
+ s->alloc_fastpath, s->free_fastpath,
+ s->alloc_fastpath * 100 / total_alloc,
+ s->free_fastpath * 100 / total_free);
+ printf("Slowpath %8lu %8lu %3lu %3lu\n",
+ total_alloc - s->alloc_fastpath, s->free_slowpath,
+ (total_alloc - s->alloc_fastpath) * 100 / total_alloc,
+ s->free_slowpath * 100 / total_free);
+ printf("Page Alloc %8lu %8lu %3lu %3lu\n",
+ s->alloc_slab, s->free_slab,
+ s->alloc_slab * 100 / total_alloc,
+ s->free_slab * 100 / total_free);
+ printf("Add partial %8lu %8lu %3lu %3lu\n",
+ s->deactivate_to_head + s->deactivate_to_tail,
+ s->free_add_partial,
+ (s->deactivate_to_head + s->deactivate_to_tail) * 100 / total_alloc,
+ s->free_add_partial * 100 / total_free);
+ printf("Remove partial %8lu %8lu %3lu %3lu\n",
+ s->alloc_from_partial, s->free_remove_partial,
+ s->alloc_from_partial * 100 / total_alloc,
+ s->free_remove_partial * 100 / total_free);
+
+ printf("RemoteObj/SlabFrozen %8lu %8lu %3lu %3lu\n",
+ s->deactivate_remote_frees, s->free_frozen,
+ s->deactivate_remote_frees * 100 / total_alloc,
+ s->free_frozen * 100 / total_free);
+
+ printf("Total %8lu %8lu\n\n", total_alloc, total_free);
+
+ if (s->cpuslab_flush)
+ printf("Flushes %8lu\n", s->cpuslab_flush);
+
+ if (s->alloc_refill)
+ printf("Refill %8lu\n", s->alloc_refill);
+
+ total = s->deactivate_full + s->deactivate_empty +
+ s->deactivate_to_head + s->deactivate_to_tail;
+
+ if (total)
+ printf("Deactivate Full=%lu(%lu%%) Empty=%lu(%lu%%) "
+ "ToHead=%lu(%lu%%) ToTail=%lu(%lu%%)\n",
+ s->deactivate_full, (s->deactivate_full * 100) / total,
+ s->deactivate_empty, (s->deactivate_empty * 100) / total,
+ s->deactivate_to_head, (s->deactivate_to_head * 100) / total,
+ s->deactivate_to_tail, (s->deactivate_to_tail * 100) / total);
+}
+
void report(struct slabinfo *s)
{
if (strcmp(s->name, "*") == 0)
@@ -430,6 +515,7 @@ void report(struct slabinfo *s)
ops(s);
show_tracking(s);
slab_numa(s, 1);
+ slab_stats(s);
}
void slabcache(struct slabinfo *s)
@@ -479,13 +565,27 @@ void slabcache(struct slabinfo *s)
*p++ = 'T';
*p = 0;
- printf("%-21s %8ld %7d %8s %14s %4d %1d %3ld %3ld %s\n",
- s->name, s->objects, s->object_size, size_str, dist_str,
- s->objs_per_slab, s->order,
- s->slabs ? (s->partial * 100) / s->slabs : 100,
- s->slabs ? (s->objects * s->object_size * 100) /
- (s->slabs * (page_size << s->order)) : 100,
- flags);
+ if (show_activity) {
+ unsigned long total_alloc;
+ unsigned long total_free;
+
+ total_alloc = s->alloc_fastpath + s->alloc_slowpath;
+ total_free = s->free_fastpath + s->free_slowpath;
+
+ printf("%-21s %8ld %8ld %8ld %3ld %3ld \n",
+ s->name, s->objects,
+ total_alloc, total_free,
+ total_alloc ? (s->alloc_fastpath * 100 / total_alloc) : 0,
+ total_free ? (s->free_fastpath * 100 / total_free) : 0);
+ }
+ else
+ printf("%-21s %8ld %7d %8s %14s %4d %1d %3ld %3ld %s\n",
+ s->name, s->objects, s->object_size, size_str, dist_str,
+ s->objs_per_slab, s->order,
+ s->slabs ? (s->partial * 100) / s->slabs : 100,
+ s->slabs ? (s->objects * s->object_size * 100) /
+ (s->slabs * (page_size << s->order)) : 100,
+ flags);
}
/*
@@ -892,6 +992,8 @@ void sort_slabs(void)
if (sort_size)
result = slab_size(s1) < slab_size(s2);
+ else if (sort_active)
+ result = slab_activity(s1) < slab_activity(s2);
else
result = strcasecmp(s1->name, s2->name);
@@ -1074,6 +1176,23 @@ void read_slab_dir(void)
free(t);
slab->store_user = get_obj("store_user");
slab->trace = get_obj("trace");
+ slab->alloc_fastpath = get_obj("alloc_fastpath");
+ slab->alloc_slowpath = get_obj("alloc_slowpath");
+ slab->free_fastpath = get_obj("free_fastpath");
+ slab->free_slowpath = get_obj("free_slowpath");
+ slab->free_frozen= get_obj("free_frozen");
+ slab->free_add_partial = get_obj("free_add_partial");
+ slab->free_remove_partial = get_obj("free_remove_partial");
+ slab->alloc_from_partial = get_obj("alloc_from_partial");
+ slab->alloc_slab = get_obj("alloc_slab");
+ slab->alloc_refill = get_obj("alloc_refill");
+ slab->free_slab = get_obj("free_slab");
+ slab->cpuslab_flush = get_obj("cpuslab_flush");
+ slab->deactivate_full = get_obj("deactivate_full");
+ slab->deactivate_empty = get_obj("deactivate_empty");
+ slab->deactivate_to_head = get_obj("deactivate_to_head");
+ slab->deactivate_to_tail = get_obj("deactivate_to_tail");
+ slab->deactivate_remote_frees = get_obj("deactivate_remote_frees");
chdir("..");
if (slab->name[0] == ':')
alias_targets++;
@@ -1124,7 +1243,9 @@ void output_slabs(void)
struct option opts[] = {
{ "aliases", 0, NULL, 'a' },
+ { "activity", 0, NULL, 'A' },
{ "debug", 2, NULL, 'd' },
+ { "display-activity", 0, NULL, 'D' },
{ "empty", 0, NULL, 'e' },
{ "first-alias", 0, NULL, 'f' },
{ "help", 0, NULL, 'h' },
@@ -1149,7 +1270,7 @@ int main(int argc, char *argv[])
page_size = getpagesize();
- while ((c = getopt_long(argc, argv, "ad::efhil1noprstvzTS",
+ while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTS",
opts, NULL)) != -1)
switch (c) {
case '1':
@@ -1158,11 +1279,17 @@ int main(int argc, char *argv[])
case 'a':
show_alias = 1;
break;
+ case 'A':
+ sort_active = 1;
+ break;
case 'd':
set_debug = 1;
if (!debug_opt_scan(optarg))
fatal("Invalid debug option '%s'\n", optarg);
break;
+ case 'D':
+ show_activity = 1;
+ break;
case 'e':
show_empty = 1;
break;
diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
index aefd23f892ba..2cdb591ac080 100644
--- a/trunk/MAINTAINERS
+++ b/trunk/MAINTAINERS
@@ -2150,6 +2150,14 @@ M: acme@ghostprotocols.net
L: netdev@vger.kernel.org
S: Maintained
+IPWIRELES DRIVER
+P: Jiri Kosina
+M: jkosina@suse.cz
+P: David Sterba
+M: dsterba@suse.cz
+S: Maintained
+T: git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git
+
IRDA SUBSYSTEM
P: Samuel Ortiz
M: samuel@sortiz.org
diff --git a/trunk/arch/m68k/kernel/process.c b/trunk/arch/m68k/kernel/process.c
index 3ee918695215..f85b928ffac4 100644
--- a/trunk/arch/m68k/kernel/process.c
+++ b/trunk/arch/m68k/kernel/process.c
@@ -335,7 +335,7 @@ void dump_thread(struct pt_regs * regs, struct user * dump)
if (dump->start_stack < TASK_SIZE)
dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;
- dump->u_ar0 = (struct user_regs_struct *)((int)&dump->regs - (int)dump);
+ dump->u_ar0 = offsetof(struct user, regs);
sw = ((struct switch_stack *)regs) - 1;
dump->regs.d1 = regs->d1;
dump->regs.d2 = regs->d2;
diff --git a/trunk/arch/powerpc/kernel/asm-offsets.c b/trunk/arch/powerpc/kernel/asm-offsets.c
index e6e49289f788..4b749c416464 100644
--- a/trunk/arch/powerpc/kernel/asm-offsets.c
+++ b/trunk/arch/powerpc/kernel/asm-offsets.c
@@ -313,7 +313,7 @@ int main(void)
DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
DEFINE(NSEC_PER_SEC, NSEC_PER_SEC);
- DEFINE(CLOCK_REALTIME_RES, (KTIME_MONOTONIC_RES).tv64);
+ DEFINE(CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC);
#ifdef CONFIG_BUG
DEFINE(BUG_ENTRY_SIZE, sizeof(struct bug_entry));
diff --git a/trunk/arch/x86/Kconfig b/trunk/arch/x86/Kconfig
index c95482b6b6dd..9d0acedf5f3f 100644
--- a/trunk/arch/x86/Kconfig
+++ b/trunk/arch/x86/Kconfig
@@ -52,6 +52,10 @@ config HAVE_LATENCYTOP_SUPPORT
config SEMAPHORE_SLEEPERS
def_bool y
+config FAST_CMPXCHG_LOCAL
+ bool
+ default y
+
config MMU
def_bool y
diff --git a/trunk/drivers/char/pcmcia/Kconfig b/trunk/drivers/char/pcmcia/Kconfig
index f25facd97bb4..00b8a84b0319 100644
--- a/trunk/drivers/char/pcmcia/Kconfig
+++ b/trunk/drivers/char/pcmcia/Kconfig
@@ -43,5 +43,14 @@ config CARDMAN_4040
(http://www.omnikey.com/), or a current development version of OpenCT
(http://www.opensc.org/).
+config IPWIRELESS
+ tristate "IPWireless 3G UMTS PCMCIA card support"
+ depends on PCMCIA
+ select PPP
+ help
+ This is a driver for 3G UMTS PCMCIA card from IPWireless company. In
+ some countries (for example Czech Republic, T-Mobile ISP) this card
+ is shipped for service called UMTS 4G.
+
endmenu
diff --git a/trunk/drivers/char/pcmcia/Makefile b/trunk/drivers/char/pcmcia/Makefile
index 0aae20985d57..be8f287aa398 100644
--- a/trunk/drivers/char/pcmcia/Makefile
+++ b/trunk/drivers/char/pcmcia/Makefile
@@ -4,6 +4,8 @@
# Makefile for the Linux PCMCIA char device drivers.
#
+obj-y += ipwireless/
+
obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o
obj-$(CONFIG_CARDMAN_4000) += cm4000_cs.o
obj-$(CONFIG_CARDMAN_4040) += cm4040_cs.o
diff --git a/trunk/drivers/char/pcmcia/ipwireless/Makefile b/trunk/drivers/char/pcmcia/ipwireless/Makefile
new file mode 100644
index 000000000000..b71eb593643d
--- /dev/null
+++ b/trunk/drivers/char/pcmcia/ipwireless/Makefile
@@ -0,0 +1,10 @@
+#
+# drivers/char/pcmcia/ipwireless/Makefile
+#
+# Makefile for the IPWireless driver
+#
+
+obj-$(CONFIG_IPWIRELESS) += ipwireless.o
+
+ipwireless-objs := hardware.o main.o network.o tty.o
+
diff --git a/trunk/drivers/char/pcmcia/ipwireless/hardware.c b/trunk/drivers/char/pcmcia/ipwireless/hardware.c
new file mode 100644
index 000000000000..1f978ff87fa8
--- /dev/null
+++ b/trunk/drivers/char/pcmcia/ipwireless/hardware.c
@@ -0,0 +1,1787 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ * by Stephen Blackheath ,
+ * Ben Martel
+ *
+ * Copyrighted as follows:
+ * Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ * Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ * Copyright (C) 2007 David Sterba
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include "hardware.h"
+#include "setup_protocol.h"
+#include "network.h"
+#include "main.h"
+
+static void ipw_send_setup_packet(struct ipw_hardware *hw);
+static void handle_received_SETUP_packet(struct ipw_hardware *ipw,
+ unsigned int address,
+ unsigned char *data, int len,
+ int is_last);
+static void ipwireless_setup_timer(unsigned long data);
+static void handle_received_CTRL_packet(struct ipw_hardware *hw,
+ unsigned int channel_idx, unsigned char *data, int len);
+
+/*#define TIMING_DIAGNOSTICS*/
+
+#ifdef TIMING_DIAGNOSTICS
+
+static struct timing_stats {
+ unsigned long last_report_time;
+ unsigned long read_time;
+ unsigned long write_time;
+ unsigned long read_bytes;
+ unsigned long write_bytes;
+ unsigned long start_time;
+};
+
+static void start_timing(void)
+{
+ timing_stats.start_time = jiffies;
+}
+
+static void end_read_timing(unsigned length)
+{
+ timing_stats.read_time += (jiffies - start_time);
+ timing_stats.read_bytes += length + 2;
+ report_timing();
+}
+
+static void end_write_timing(unsigned length)
+{
+ timing_stats.write_time += (jiffies - start_time);
+ timing_stats.write_bytes += length + 2;
+ report_timing();
+}
+
+static void report_timing(void)
+{
+ unsigned long since = jiffies - timing_stats.last_report_time;
+
+ /* If it's been more than one second... */
+ if (since >= HZ) {
+ int first = (timing_stats.last_report_time == 0);
+
+ timing_stats.last_report_time = jiffies;
+ if (!first)
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": %u us elapsed - read %lu bytes in %u us, "
+ "wrote %lu bytes in %u us\n",
+ jiffies_to_usecs(since),
+ timing_stats.read_bytes,
+ jiffies_to_usecs(timing_stats.read_time),
+ timing_stats.write_bytes,
+ jiffies_to_usecs(timing_stats.write_time));
+
+ timing_stats.read_time = 0;
+ timing_stats.write_time = 0;
+ timing_stats.read_bytes = 0;
+ timing_stats.write_bytes = 0;
+ }
+}
+#else
+static void start_timing(void) { }
+static void end_read_timing(unsigned length) { }
+static void end_write_timing(unsigned length) { }
+#endif
+
+/* Imported IPW definitions */
+
+#define LL_MTU_V1 318
+#define LL_MTU_V2 250
+#define LL_MTU_MAX (LL_MTU_V1 > LL_MTU_V2 ? LL_MTU_V1 : LL_MTU_V2)
+
+#define PRIO_DATA 2
+#define PRIO_CTRL 1
+#define PRIO_SETUP 0
+
+/* Addresses */
+#define ADDR_SETUP_PROT 0
+
+/* Protocol ids */
+enum {
+ /* Identifier for the Com Data protocol */
+ TL_PROTOCOLID_COM_DATA = 0,
+
+ /* Identifier for the Com Control protocol */
+ TL_PROTOCOLID_COM_CTRL = 1,
+
+ /* Identifier for the Setup protocol */
+ TL_PROTOCOLID_SETUP = 2
+};
+
+/* Number of bytes in NL packet header (cannot do
+ * sizeof(nl_packet_header) since it's a bitfield) */
+#define NL_FIRST_PACKET_HEADER_SIZE 3
+
+/* Number of bytes in NL packet header (cannot do
+ * sizeof(nl_packet_header) since it's a bitfield) */
+#define NL_FOLLOWING_PACKET_HEADER_SIZE 1
+
+struct nl_first_packet_header {
+#if defined(__BIG_ENDIAN_BITFIELD)
+ unsigned char packet_rank:2;
+ unsigned char address:3;
+ unsigned char protocol:3;
+#else
+ unsigned char protocol:3;
+ unsigned char address:3;
+ unsigned char packet_rank:2;
+#endif
+ unsigned char length_lsb;
+ unsigned char length_msb;
+};
+
+struct nl_packet_header {
+#if defined(__BIG_ENDIAN_BITFIELD)
+ unsigned char packet_rank:2;
+ unsigned char address:3;
+ unsigned char protocol:3;
+#else
+ unsigned char protocol:3;
+ unsigned char address:3;
+ unsigned char packet_rank:2;
+#endif
+};
+
+/* Value of 'packet_rank' above */
+#define NL_INTERMEDIATE_PACKET 0x0
+#define NL_LAST_PACKET 0x1
+#define NL_FIRST_PACKET 0x2
+
+union nl_packet {
+ /* Network packet header of the first packet (a special case) */
+ struct nl_first_packet_header hdr_first;
+ /* Network packet header of the following packets (if any) */
+ struct nl_packet_header hdr;
+ /* Complete network packet (header + data) */
+ unsigned char rawpkt[LL_MTU_MAX];
+} __attribute__ ((__packed__));
+
+#define HW_VERSION_UNKNOWN -1
+#define HW_VERSION_1 1
+#define HW_VERSION_2 2
+
+/* IPW I/O ports */
+#define IOIER 0x00 /* Interrupt Enable Register */
+#define IOIR 0x02 /* Interrupt Source/ACK register */
+#define IODCR 0x04 /* Data Control Register */
+#define IODRR 0x06 /* Data Read Register */
+#define IODWR 0x08 /* Data Write Register */
+#define IOESR 0x0A /* Embedded Driver Status Register */
+#define IORXR 0x0C /* Rx Fifo Register (Host to Embedded) */
+#define IOTXR 0x0E /* Tx Fifo Register (Embedded to Host) */
+
+/* I/O ports and bit definitions for version 1 of the hardware */
+
+/* IER bits*/
+#define IER_RXENABLED 0x1
+#define IER_TXENABLED 0x2
+
+/* ISR bits */
+#define IR_RXINTR 0x1
+#define IR_TXINTR 0x2
+
+/* DCR bits */
+#define DCR_RXDONE 0x1
+#define DCR_TXDONE 0x2
+#define DCR_RXRESET 0x4
+#define DCR_TXRESET 0x8
+
+/* I/O ports and bit definitions for version 2 of the hardware */
+
+struct MEMCCR {
+ unsigned short reg_config_option; /* PCCOR: Configuration Option Register */
+ unsigned short reg_config_and_status; /* PCCSR: Configuration and Status Register */
+ unsigned short reg_pin_replacement; /* PCPRR: Pin Replacemant Register */
+ unsigned short reg_socket_and_copy; /* PCSCR: Socket and Copy Register */
+ unsigned short reg_ext_status; /* PCESR: Extendend Status Register */
+ unsigned short reg_io_base; /* PCIOB: I/O Base Register */
+};
+
+struct MEMINFREG {
+ unsigned short memreg_tx_old; /* TX Register (R/W) */
+ unsigned short pad1;
+ unsigned short memreg_rx_done; /* RXDone Register (R/W) */
+ unsigned short pad2;
+ unsigned short memreg_rx; /* RX Register (R/W) */
+ unsigned short pad3;
+ unsigned short memreg_pc_interrupt_ack; /* PC intr Ack Register (W) */
+ unsigned short pad4;
+ unsigned long memreg_card_present;/* Mask for Host to check (R) for
+ * CARD_PRESENT_VALUE */
+ unsigned short memreg_tx_new; /* TX2 (new) Register (R/W) */
+};
+
+#define IODMADPR 0x00 /* DMA Data Port Register (R/W) */
+
+#define CARD_PRESENT_VALUE (0xBEEFCAFEUL)
+
+#define MEMTX_TX 0x0001
+#define MEMRX_RX 0x0001
+#define MEMRX_RX_DONE 0x0001
+#define MEMRX_PCINTACKK 0x0001
+#define MEMRX_MEMSPURIOUSINT 0x0001
+
+#define NL_NUM_OF_PRIORITIES 3
+#define NL_NUM_OF_PROTOCOLS 3
+#define NL_NUM_OF_ADDRESSES NO_OF_IPW_CHANNELS
+
+struct ipw_hardware {
+ unsigned int base_port;
+ short hw_version;
+ unsigned short ll_mtu;
+ spinlock_t spinlock;
+
+ int initializing;
+ int init_loops;
+ struct timer_list setup_timer;
+
+ int tx_ready;
+ struct list_head tx_queue[NL_NUM_OF_PRIORITIES];
+ /* True if any packets are queued for transmission */
+ int tx_queued;
+
+ int rx_bytes_queued;
+ struct list_head rx_queue;
+ /* Pool of rx_packet structures that are not currently used. */
+ struct list_head rx_pool;
+ int rx_pool_size;
+ /* True if reception of data is blocked while userspace processes it. */
+ int blocking_rx;
+ /* True if there is RX data ready on the hardware. */
+ int rx_ready;
+ unsigned short last_memtx_serial;
+ /*
+ * Newer versions of the V2 card firmware send serial numbers in the
+ * MemTX register. 'serial_number_detected' is set true when we detect
+ * a non-zero serial number (indicating the new firmware). Thereafter,
+ * the driver can safely ignore the Timer Recovery re-sends to avoid
+ * out-of-sync problems.
+ */
+ int serial_number_detected;
+ struct work_struct work_rx;
+
+ /* True if we are to send the set-up data to the hardware. */
+ int to_setup;
+
+ /* Card has been removed */
+ int removed;
+ /* Saved irq value when we disable the interrupt. */
+ int irq;
+ /* True if this driver is shutting down. */
+ int shutting_down;
+ /* Modem control lines */
+ unsigned int control_lines[NL_NUM_OF_ADDRESSES];
+ struct ipw_rx_packet *packet_assembler[NL_NUM_OF_ADDRESSES];
+
+ struct tasklet_struct tasklet;
+
+ /* The handle for the network layer, for the sending of events to it. */
+ struct ipw_network *network;
+ struct MEMINFREG __iomem *memory_info_regs;
+ struct MEMCCR __iomem *memregs_CCR;
+ void (*reboot_callback) (void *data);
+ void *reboot_callback_data;
+
+ unsigned short __iomem *memreg_tx;
+};
+
+/*
+ * Packet info structure for tx packets.
+ * Note: not all the fields defined here are required for all protocols
+ */
+struct ipw_tx_packet {
+ struct list_head queue;
+ /* channel idx + 1 */
+ unsigned char dest_addr;
+ /* SETUP, CTRL or DATA */
+ unsigned char protocol;
+ /* Length of data block, which starts at the end of this structure */
+ unsigned short length;
+ /* Sending state */
+ /* Offset of where we've sent up to so far */
+ unsigned long offset;
+ /* Count of packet fragments, starting at 0 */
+ int fragment_count;
+
+ /* Called after packet is sent and before is freed */
+ void (*packet_callback) (void *cb_data, unsigned int packet_length);
+ void *callback_data;
+};
+
+/* Signals from DTE */
+#define COMCTRL_RTS 0
+#define COMCTRL_DTR 1
+
+/* Signals from DCE */
+#define COMCTRL_CTS 2
+#define COMCTRL_DCD 3
+#define COMCTRL_DSR 4
+#define COMCTRL_RI 5
+
+struct ipw_control_packet_body {
+ /* DTE signal or DCE signal */
+ unsigned char sig_no;
+ /* 0: set signal, 1: clear signal */
+ unsigned char value;
+} __attribute__ ((__packed__));
+
+struct ipw_control_packet {
+ struct ipw_tx_packet header;
+ struct ipw_control_packet_body body;
+};
+
+struct ipw_rx_packet {
+ struct list_head queue;
+ unsigned int capacity;
+ unsigned int length;
+ unsigned int protocol;
+ unsigned int channel_idx;
+};
+
+#ifdef IPWIRELESS_STATE_DEBUG
+int ipwireless_dump_hardware_state(char *p, size_t limit,
+ struct ipw_hardware *hw)
+{
+ return snprintf(p, limit,
+ "debug: initializing=%d\n"
+ "debug: tx_ready=%d\n"
+ "debug: tx_queued=%d\n"
+ "debug: rx_ready=%d\n"
+ "debug: rx_bytes_queued=%d\n"
+ "debug: blocking_rx=%d\n"
+ "debug: removed=%d\n"
+ "debug: hardware.shutting_down=%d\n"
+ "debug: to_setup=%d\n",
+ hw->initializing,
+ hw->tx_ready,
+ hw->tx_queued,
+ hw->rx_ready,
+ hw->rx_bytes_queued,
+ hw->blocking_rx,
+ hw->removed,
+ hw->shutting_down,
+ hw->to_setup);
+}
+#endif
+
+static char *data_type(const unsigned char *buf, unsigned length)
+{
+ struct nl_packet_header *hdr = (struct nl_packet_header *) buf;
+
+ if (length == 0)
+ return " ";
+
+ if (hdr->packet_rank & NL_FIRST_PACKET) {
+ switch (hdr->protocol) {
+ case TL_PROTOCOLID_COM_DATA: return "DATA ";
+ case TL_PROTOCOLID_COM_CTRL: return "CTRL ";
+ case TL_PROTOCOLID_SETUP: return "SETUP";
+ default: return "???? ";
+ }
+ } else
+ return " ";
+}
+
+#define DUMP_MAX_BYTES 64
+
+static void dump_data_bytes(const char *type, const unsigned char *data,
+ unsigned length)
+{
+ char prefix[56];
+
+ sprintf(prefix, IPWIRELESS_PCCARD_NAME ": %s %s ",
+ type, data_type(data, length));
+ print_hex_dump_bytes(prefix, 0, (void *)data,
+ length < DUMP_MAX_BYTES ? length : DUMP_MAX_BYTES);
+}
+
+static int do_send_fragment(struct ipw_hardware *hw, const unsigned char *data,
+ unsigned length)
+{
+ int i;
+ unsigned long flags;
+
+ start_timing();
+
+ if (length == 0)
+ return 0;
+
+ if (length > hw->ll_mtu)
+ return -1;
+
+ if (ipwireless_debug)
+ dump_data_bytes("send", data, length);
+
+ spin_lock_irqsave(&hw->spinlock, flags);
+
+ if (hw->hw_version == HW_VERSION_1) {
+ outw((unsigned short) length, hw->base_port + IODWR);
+
+ for (i = 0; i < length; i += 2) {
+ unsigned short d = data[i];
+ __le16 raw_data;
+
+ if (likely(i + 1 < length))
+ d |= data[i + 1] << 8;
+ raw_data = cpu_to_le16(d);
+ outw(raw_data, hw->base_port + IODWR);
+ }
+
+ outw(DCR_TXDONE, hw->base_port + IODCR);
+ } else if (hw->hw_version == HW_VERSION_2) {
+ outw((unsigned short) length, hw->base_port + IODMADPR);
+
+ for (i = 0; i < length; i += 2) {
+ unsigned short d = data[i];
+ __le16 raw_data;
+
+ if ((i + 1 < length))
+ d |= data[i + 1] << 8;
+ raw_data = cpu_to_le16(d);
+ outw(raw_data, hw->base_port + IODMADPR);
+ }
+ while ((i & 3) != 2) {
+ outw((unsigned short) 0xDEAD, hw->base_port + IODMADPR);
+ i += 2;
+ }
+ writew(MEMRX_RX, &hw->memory_info_regs->memreg_rx);
+ }
+
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+
+ end_write_timing(length);
+
+ return 0;
+}
+
+static int do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet)
+{
+ unsigned short fragment_data_len;
+ unsigned short data_left = packet->length - packet->offset;
+ unsigned short header_size;
+ union nl_packet pkt;
+
+ header_size =
+ (packet->fragment_count == 0)
+ ? NL_FIRST_PACKET_HEADER_SIZE
+ : NL_FOLLOWING_PACKET_HEADER_SIZE;
+ fragment_data_len = hw->ll_mtu - header_size;
+ if (data_left < fragment_data_len)
+ fragment_data_len = data_left;
+
+ pkt.hdr_first.protocol = packet->protocol;
+ pkt.hdr_first.address = packet->dest_addr;
+ pkt.hdr_first.packet_rank = 0;
+
+ /* First packet? */
+ if (packet->fragment_count == 0) {
+ pkt.hdr_first.packet_rank |= NL_FIRST_PACKET;
+ pkt.hdr_first.length_lsb = (unsigned char) packet->length;
+ pkt.hdr_first.length_msb =
+ (unsigned char) (packet->length >> 8);
+ }
+
+ memcpy(pkt.rawpkt + header_size,
+ ((unsigned char *) packet) + sizeof(struct ipw_tx_packet) +
+ packet->offset, fragment_data_len);
+ packet->offset += fragment_data_len;
+ packet->fragment_count++;
+
+ /* Last packet? (May also be first packet.) */
+ if (packet->offset == packet->length)
+ pkt.hdr_first.packet_rank |= NL_LAST_PACKET;
+ do_send_fragment(hw, pkt.rawpkt, header_size + fragment_data_len);
+
+ /* If this packet has unsent data, then re-queue it. */
+ if (packet->offset < packet->length) {
+ /*
+ * Re-queue it at the head of the highest priority queue so
+ * it goes before all other packets
+ */
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->spinlock, flags);
+ list_add(&packet->queue, &hw->tx_queue[0]);
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+ } else {
+ if (packet->packet_callback)
+ packet->packet_callback(packet->callback_data,
+ packet->length);
+ kfree(packet);
+ }
+
+ return 0;
+}
+
+static void ipw_setup_hardware(struct ipw_hardware *hw)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->spinlock, flags);
+ if (hw->hw_version == HW_VERSION_1) {
+ /* Reset RX FIFO */
+ outw(DCR_RXRESET, hw->base_port + IODCR);
+ /* SB: Reset TX FIFO */
+ outw(DCR_TXRESET, hw->base_port + IODCR);
+
+ /* Enable TX and RX interrupts. */
+ outw(IER_TXENABLED | IER_RXENABLED, hw->base_port + IOIER);
+ } else {
+ /*
+ * Set INTRACK bit (bit 0), which means we must explicitly
+ * acknowledge interrupts by clearing bit 2 of reg_config_and_status.
+ */
+ unsigned short csr = readw(&hw->memregs_CCR->reg_config_and_status);
+
+ csr |= 1;
+ writew(csr, &hw->memregs_CCR->reg_config_and_status);
+ }
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+}
+
+/*
+ * If 'packet' is NULL, then this function allocates a new packet, setting its
+ * length to 0 and ensuring it has the specified minimum amount of free space.
+ *
+ * If 'packet' is not NULL, then this function enlarges it if it doesn't
+ * have the specified minimum amount of free space.
+ *
+ */
+static struct ipw_rx_packet *pool_allocate(struct ipw_hardware *hw,
+ struct ipw_rx_packet *packet,
+ int minimum_free_space)
+{
+
+ if (!packet) {
+ unsigned long flags;
+
+ /*
+ * If this is the first fragment, then we will need to fetch a
+ * packet to put it in.
+ */
+ spin_lock_irqsave(&hw->spinlock, flags);
+ /* If we have one in our pool, then pull it out. */
+ if (!list_empty(&hw->rx_pool)) {
+ packet = list_first_entry(&hw->rx_pool,
+ struct ipw_rx_packet, queue);
+ list_del(&packet->queue);
+ hw->rx_pool_size--;
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+ } else {
+ /* Otherwise allocate a new one. */
+ static int min_capacity = 256;
+ int new_capacity;
+
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+ new_capacity =
+ minimum_free_space > min_capacity
+ ? minimum_free_space
+ : min_capacity;
+ packet = kmalloc(sizeof(struct ipw_rx_packet)
+ + new_capacity, GFP_ATOMIC);
+ if (!packet)
+ return NULL;
+ packet->capacity = new_capacity;
+ }
+ packet->length = 0;
+ }
+
+ /*
+ * If this packet does not have sufficient capacity for the data we
+ * want to add, then make it bigger.
+ */
+ if (packet->length + minimum_free_space > packet->capacity) {
+ struct ipw_rx_packet *old_packet = packet;
+
+ packet = kmalloc(sizeof(struct ipw_rx_packet) +
+ old_packet->length + minimum_free_space,
+ GFP_ATOMIC);
+ if (!packet)
+ return NULL;
+ memcpy(packet, old_packet,
+ sizeof(struct ipw_rx_packet)
+ + old_packet->length);
+ packet->capacity = old_packet->length + minimum_free_space;
+ kfree(old_packet);
+ }
+
+ return packet;
+}
+
+static void pool_free(struct ipw_hardware *hw, struct ipw_rx_packet *packet)
+{
+ if (hw->rx_pool_size > 6)
+ kfree(packet);
+ else {
+ hw->rx_pool_size++;
+ list_add_tail(&packet->queue, &hw->rx_pool);
+ }
+}
+
+static void queue_received_packet(struct ipw_hardware *hw,
+ unsigned int protocol, unsigned int address,
+ unsigned char *data, int length, int is_last)
+{
+ unsigned int channel_idx = address - 1;
+ struct ipw_rx_packet *packet = NULL;
+ unsigned long flags;
+
+ /* Discard packet if channel index is out of range. */
+ if (channel_idx >= NL_NUM_OF_ADDRESSES) {
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": data packet has bad address %u\n", address);
+ return;
+ }
+
+ /*
+ * ->packet_assembler is safe to touch unlocked, this is the only place
+ */
+ if (protocol == TL_PROTOCOLID_COM_DATA) {
+ struct ipw_rx_packet **assem =
+ &hw->packet_assembler[channel_idx];
+
+ /*
+ * Create a new packet, or assembler already contains one
+ * enlarge it by 'length' bytes.
+ */
+ (*assem) = pool_allocate(hw, *assem, length);
+ if (!(*assem)) {
+ printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+ ": no memory for incomming data packet, dropped!\n");
+ return;
+ }
+ (*assem)->protocol = protocol;
+ (*assem)->channel_idx = channel_idx;
+
+ /* Append this packet data onto existing data. */
+ memcpy((unsigned char *)(*assem) +
+ sizeof(struct ipw_rx_packet)
+ + (*assem)->length, data, length);
+ (*assem)->length += length;
+ if (is_last) {
+ packet = *assem;
+ *assem = NULL;
+ /* Count queued DATA bytes only */
+ spin_lock_irqsave(&hw->spinlock, flags);
+ hw->rx_bytes_queued += packet->length;
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+ }
+ } else {
+ /* If it's a CTRL packet, don't assemble, just queue it. */
+ packet = pool_allocate(hw, NULL, length);
+ if (!packet) {
+ printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+ ": no memory for incomming ctrl packet, dropped!\n");
+ return;
+ }
+ packet->protocol = protocol;
+ packet->channel_idx = channel_idx;
+ memcpy((unsigned char *)packet + sizeof(struct ipw_rx_packet),
+ data, length);
+ packet->length = length;
+ }
+
+ /*
+ * If this is the last packet, then send the assembled packet on to the
+ * network layer.
+ */
+ if (packet) {
+ spin_lock_irqsave(&hw->spinlock, flags);
+ list_add_tail(&packet->queue, &hw->rx_queue);
+ /* Block reception of incoming packets if queue is full. */
+ hw->blocking_rx =
+ hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE;
+
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+ schedule_work(&hw->work_rx);
+ }
+}
+
+/*
+ * Workqueue callback
+ */
+static void ipw_receive_data_work(struct work_struct *work_rx)
+{
+ struct ipw_hardware *hw =
+ container_of(work_rx, struct ipw_hardware, work_rx);
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->spinlock, flags);
+ while (!list_empty(&hw->rx_queue)) {
+ struct ipw_rx_packet *packet =
+ list_first_entry(&hw->rx_queue,
+ struct ipw_rx_packet, queue);
+
+ if (hw->shutting_down)
+ break;
+ list_del(&packet->queue);
+
+ /*
+ * Note: ipwireless_network_packet_received must be called in a
+ * process context (i.e. via schedule_work) because the tty
+ * output code can sleep in the tty_flip_buffer_push call.
+ */
+ if (packet->protocol == TL_PROTOCOLID_COM_DATA) {
+ if (hw->network != NULL) {
+ /* If the network hasn't been disconnected. */
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+ /*
+ * This must run unlocked due to tty processing
+ * and mutex locking
+ */
+ ipwireless_network_packet_received(
+ hw->network,
+ packet->channel_idx,
+ (unsigned char *)packet
+ + sizeof(struct ipw_rx_packet),
+ packet->length);
+ spin_lock_irqsave(&hw->spinlock, flags);
+ }
+ /* Count queued DATA bytes only */
+ hw->rx_bytes_queued -= packet->length;
+ } else {
+ /*
+ * This is safe to be called locked, callchain does
+ * not block
+ */
+ handle_received_CTRL_packet(hw, packet->channel_idx,
+ (unsigned char *)packet
+ + sizeof(struct ipw_rx_packet),
+ packet->length);
+ }
+ pool_free(hw, packet);
+ /*
+ * Unblock reception of incoming packets if queue is no longer
+ * full.
+ */
+ hw->blocking_rx =
+ hw->rx_bytes_queued >= IPWIRELESS_RX_QUEUE_SIZE;
+ if (hw->shutting_down)
+ break;
+ }
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+}
+
+static void handle_received_CTRL_packet(struct ipw_hardware *hw,
+ unsigned int channel_idx,
+ unsigned char *data, int len)
+{
+ struct ipw_control_packet_body *body =
+ (struct ipw_control_packet_body *) data;
+ unsigned int changed_mask;
+
+ if (len != sizeof(struct ipw_control_packet_body)) {
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": control packet was %d bytes - wrong size!\n",
+ len);
+ return;
+ }
+
+ switch (body->sig_no) {
+ case COMCTRL_CTS:
+ changed_mask = IPW_CONTROL_LINE_CTS;
+ break;
+ case COMCTRL_DCD:
+ changed_mask = IPW_CONTROL_LINE_DCD;
+ break;
+ case COMCTRL_DSR:
+ changed_mask = IPW_CONTROL_LINE_DSR;
+ break;
+ case COMCTRL_RI:
+ changed_mask = IPW_CONTROL_LINE_RI;
+ break;
+ default:
+ changed_mask = 0;
+ }
+
+ if (changed_mask != 0) {
+ if (body->value)
+ hw->control_lines[channel_idx] |= changed_mask;
+ else
+ hw->control_lines[channel_idx] &= ~changed_mask;
+ if (hw->network)
+ ipwireless_network_notify_control_line_change(
+ hw->network,
+ channel_idx,
+ hw->control_lines[channel_idx],
+ changed_mask);
+ }
+}
+
+static void handle_received_packet(struct ipw_hardware *hw,
+ union nl_packet *packet,
+ unsigned short len)
+{
+ unsigned int protocol = packet->hdr.protocol;
+ unsigned int address = packet->hdr.address;
+ unsigned int header_length;
+ unsigned char *data;
+ unsigned int data_len;
+ int is_last = packet->hdr.packet_rank & NL_LAST_PACKET;
+
+ if (packet->hdr.packet_rank & NL_FIRST_PACKET)
+ header_length = NL_FIRST_PACKET_HEADER_SIZE;
+ else
+ header_length = NL_FOLLOWING_PACKET_HEADER_SIZE;
+
+ data = packet->rawpkt + header_length;
+ data_len = len - header_length;
+ switch (protocol) {
+ case TL_PROTOCOLID_COM_DATA:
+ case TL_PROTOCOLID_COM_CTRL:
+ queue_received_packet(hw, protocol, address, data, data_len,
+ is_last);
+ break;
+ case TL_PROTOCOLID_SETUP:
+ handle_received_SETUP_packet(hw, address, data, data_len,
+ is_last);
+ break;
+ }
+}
+
+static void acknowledge_data_read(struct ipw_hardware *hw)
+{
+ if (hw->hw_version == HW_VERSION_1)
+ outw(DCR_RXDONE, hw->base_port + IODCR);
+ else
+ writew(MEMRX_PCINTACKK,
+ &hw->memory_info_regs->memreg_pc_interrupt_ack);
+}
+
+/*
+ * Retrieve a packet from the IPW hardware.
+ */
+static void do_receive_packet(struct ipw_hardware *hw)
+{
+ unsigned len;
+ unsigned int i;
+ unsigned char pkt[LL_MTU_MAX];
+
+ start_timing();
+
+ if (hw->hw_version == HW_VERSION_1) {
+ len = inw(hw->base_port + IODRR);
+ if (len > hw->ll_mtu) {
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": received a packet of %u bytes - "
+ "longer than the MTU!\n", len);
+ outw(DCR_RXDONE | DCR_RXRESET, hw->base_port + IODCR);
+ return;
+ }
+
+ for (i = 0; i < len; i += 2) {
+ __le16 raw_data = inw(hw->base_port + IODRR);
+ unsigned short data = le16_to_cpu(raw_data);
+
+ pkt[i] = (unsigned char) data;
+ pkt[i + 1] = (unsigned char) (data >> 8);
+ }
+ } else {
+ len = inw(hw->base_port + IODMADPR);
+ if (len > hw->ll_mtu) {
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": received a packet of %u bytes - "
+ "longer than the MTU!\n", len);
+ writew(MEMRX_PCINTACKK,
+ &hw->memory_info_regs->memreg_pc_interrupt_ack);
+ return;
+ }
+
+ for (i = 0; i < len; i += 2) {
+ __le16 raw_data = inw(hw->base_port + IODMADPR);
+ unsigned short data = le16_to_cpu(raw_data);
+
+ pkt[i] = (unsigned char) data;
+ pkt[i + 1] = (unsigned char) (data >> 8);
+ }
+
+ while ((i & 3) != 2) {
+ inw(hw->base_port + IODMADPR);
+ i += 2;
+ }
+ }
+
+ acknowledge_data_read(hw);
+
+ if (ipwireless_debug)
+ dump_data_bytes("recv", pkt, len);
+
+ handle_received_packet(hw, (union nl_packet *) pkt, len);
+
+ end_read_timing(len);
+}
+
+static int get_current_packet_priority(struct ipw_hardware *hw)
+{
+ /*
+ * If we're initializing, don't send anything of higher priority than
+ * PRIO_SETUP. The network layer therefore need not care about
+ * hardware initialization - any of its stuff will simply be queued
+ * until setup is complete.
+ */
+ return (hw->to_setup || hw->initializing
+ ? PRIO_SETUP + 1 :
+ NL_NUM_OF_PRIORITIES);
+}
+
+/*
+ * return 1 if something has been received from hw
+ */
+static int get_packets_from_hw(struct ipw_hardware *hw)
+{
+ int received = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->spinlock, flags);
+ while (hw->rx_ready && !hw->blocking_rx) {
+ received = 1;
+ hw->rx_ready--;
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+
+ do_receive_packet(hw);
+
+ spin_lock_irqsave(&hw->spinlock, flags);
+ }
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+
+ return received;
+}
+
+/*
+ * Send pending packet up to given priority, prioritize SETUP data until
+ * hardware is fully setup.
+ *
+ * return 1 if more packets can be sent
+ */
+static int send_pending_packet(struct ipw_hardware *hw, int priority_limit)
+{
+ int more_to_send = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->spinlock, flags);
+ if (hw->tx_queued && hw->tx_ready != 0) {
+ int priority;
+ struct ipw_tx_packet *packet = NULL;
+
+ hw->tx_ready--;
+
+ /* Pick a packet */
+ for (priority = 0; priority < priority_limit; priority++) {
+ if (!list_empty(&hw->tx_queue[priority])) {
+ packet = list_first_entry(
+ &hw->tx_queue[priority],
+ struct ipw_tx_packet,
+ queue);
+
+ list_del(&packet->queue);
+
+ break;
+ }
+ }
+ if (!packet) {
+ hw->tx_queued = 0;
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+ return 0;
+ }
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+
+ /* Send */
+ do_send_packet(hw, packet);
+
+ /* Check if more to send */
+ spin_lock_irqsave(&hw->spinlock, flags);
+ for (priority = 0; priority < priority_limit; priority++)
+ if (!list_empty(&hw->tx_queue[priority])) {
+ more_to_send = 1;
+ break;
+ }
+
+ if (!more_to_send)
+ hw->tx_queued = 0;
+ }
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+
+ return more_to_send;
+}
+
+/*
+ * Send and receive all queued packets.
+ */
+static void ipwireless_do_tasklet(unsigned long hw_)
+{
+ struct ipw_hardware *hw = (struct ipw_hardware *) hw_;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->spinlock, flags);
+ if (hw->shutting_down) {
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+ return;
+ }
+
+ if (hw->to_setup == 1) {
+ /*
+ * Initial setup data sent to hardware
+ */
+ hw->to_setup = 2;
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+
+ ipw_setup_hardware(hw);
+ ipw_send_setup_packet(hw);
+
+ send_pending_packet(hw, PRIO_SETUP + 1);
+ get_packets_from_hw(hw);
+ } else {
+ int priority_limit = get_current_packet_priority(hw);
+ int again;
+
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+
+ do {
+ again = send_pending_packet(hw, priority_limit);
+ again |= get_packets_from_hw(hw);
+ } while (again);
+ }
+}
+
+/*
+ * return true if the card is physically present.
+ */
+static int is_card_present(struct ipw_hardware *hw)
+{
+ if (hw->hw_version == HW_VERSION_1)
+ return inw(hw->base_port + IOIR) != 0xFFFF;
+ else
+ return readl(&hw->memory_info_regs->memreg_card_present) ==
+ CARD_PRESENT_VALUE;
+}
+
+static irqreturn_t ipwireless_handle_v1_interrupt(int irq,
+ struct ipw_hardware *hw)
+{
+ unsigned short irqn;
+
+ irqn = inw(hw->base_port + IOIR);
+
+ /* Check if card is present */
+ if (irqn == 0xFFFF)
+ return IRQ_NONE;
+ else if (irqn != 0) {
+ unsigned short ack = 0;
+ unsigned long flags;
+
+ /* Transmit complete. */
+ if (irqn & IR_TXINTR) {
+ ack |= IR_TXINTR;
+ spin_lock_irqsave(&hw->spinlock, flags);
+ hw->tx_ready++;
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+ }
+ /* Received data */
+ if (irqn & IR_RXINTR) {
+ ack |= IR_RXINTR;
+ spin_lock_irqsave(&hw->spinlock, flags);
+ hw->rx_ready++;
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+ }
+ if (ack != 0) {
+ outw(ack, hw->base_port + IOIR);
+ tasklet_schedule(&hw->tasklet);
+ }
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static void acknowledge_pcmcia_interrupt(struct ipw_hardware *hw)
+{
+ unsigned short csr = readw(&hw->memregs_CCR->reg_config_and_status);
+
+ csr &= 0xfffd;
+ writew(csr, &hw->memregs_CCR->reg_config_and_status);
+}
+
+static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq,
+ struct ipw_hardware *hw)
+{
+ int tx = 0;
+ int rx = 0;
+ int rx_repeat = 0;
+ int try_mem_tx_old;
+ unsigned long flags;
+
+ do {
+
+ unsigned short memtx = readw(hw->memreg_tx);
+ unsigned short memtx_serial;
+ unsigned short memrxdone =
+ readw(&hw->memory_info_regs->memreg_rx_done);
+
+ try_mem_tx_old = 0;
+
+ /* check whether the interrupt was generated by ipwireless card */
+ if (!(memtx & MEMTX_TX) && !(memrxdone & MEMRX_RX_DONE)) {
+
+ /* check if the card uses memreg_tx_old register */
+ if (hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) {
+ memtx = readw(&hw->memory_info_regs->memreg_tx_old);
+ if (memtx & MEMTX_TX) {
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": Using memreg_tx_old\n");
+ hw->memreg_tx =
+ &hw->memory_info_regs->memreg_tx_old;
+ } else {
+ return IRQ_NONE;
+ }
+ } else {
+ return IRQ_NONE;
+ }
+ }
+
+ /*
+ * See if the card is physically present. Note that while it is
+ * powering up, it appears not to be present.
+ */
+ if (!is_card_present(hw)) {
+ acknowledge_pcmcia_interrupt(hw);
+ return IRQ_HANDLED;
+ }
+
+ memtx_serial = memtx & (unsigned short) 0xff00;
+ if (memtx & MEMTX_TX) {
+ writew(memtx_serial, hw->memreg_tx);
+
+ if (hw->serial_number_detected) {
+ if (memtx_serial != hw->last_memtx_serial) {
+ hw->last_memtx_serial = memtx_serial;
+ spin_lock_irqsave(&hw->spinlock, flags);
+ hw->rx_ready++;
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+ rx = 1;
+ } else
+ /* Ignore 'Timer Recovery' duplicates. */
+ rx_repeat = 1;
+ } else {
+ /*
+ * If a non-zero serial number is seen, then enable
+ * serial number checking.
+ */
+ if (memtx_serial != 0) {
+ hw->serial_number_detected = 1;
+ printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
+ ": memreg_tx serial num detected\n");
+
+ spin_lock_irqsave(&hw->spinlock, flags);
+ hw->rx_ready++;
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+ }
+ rx = 1;
+ }
+ }
+ if (memrxdone & MEMRX_RX_DONE) {
+ writew(0, &hw->memory_info_regs->memreg_rx_done);
+ spin_lock_irqsave(&hw->spinlock, flags);
+ hw->tx_ready++;
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+ tx = 1;
+ }
+ if (tx)
+ writew(MEMRX_PCINTACKK,
+ &hw->memory_info_regs->memreg_pc_interrupt_ack);
+
+ acknowledge_pcmcia_interrupt(hw);
+
+ if (tx || rx)
+ tasklet_schedule(&hw->tasklet);
+ else if (!rx_repeat) {
+ if (hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) {
+ if (hw->serial_number_detected)
+ printk(KERN_WARNING IPWIRELESS_PCCARD_NAME
+ ": spurious interrupt - new_tx mode\n");
+ else {
+ printk(KERN_WARNING IPWIRELESS_PCCARD_NAME
+ ": no valid memreg_tx value - "
+ "switching to the old memreg_tx\n");
+ hw->memreg_tx =
+ &hw->memory_info_regs->memreg_tx_old;
+ try_mem_tx_old = 1;
+ }
+ } else
+ printk(KERN_WARNING IPWIRELESS_PCCARD_NAME
+ ": spurious interrupt - old_tx mode\n");
+ }
+
+ } while (try_mem_tx_old == 1);
+
+ return IRQ_HANDLED;
+}
+
+irqreturn_t ipwireless_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct ipw_hardware *hw = dev_id;
+
+ if (hw->hw_version == HW_VERSION_1)
+ return ipwireless_handle_v1_interrupt(irq, hw);
+ else
+ return ipwireless_handle_v2_v3_interrupt(irq, hw);
+}
+
+static void flush_packets_to_hw(struct ipw_hardware *hw)
+{
+ int priority_limit;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->spinlock, flags);
+ priority_limit = get_current_packet_priority(hw);
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+
+ while (send_pending_packet(hw, priority_limit));
+}
+
+static void send_packet(struct ipw_hardware *hw, int priority,
+ struct ipw_tx_packet *packet)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->spinlock, flags);
+ list_add_tail(&packet->queue, &hw->tx_queue[priority]);
+ hw->tx_queued = 1;
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+
+ flush_packets_to_hw(hw);
+}
+
+/* Create data packet, non-atomic allocation */
+static void *alloc_data_packet(int data_size,
+ unsigned char dest_addr,
+ unsigned char protocol)
+{
+ struct ipw_tx_packet *packet = kzalloc(
+ sizeof(struct ipw_tx_packet) + data_size,
+ GFP_ATOMIC);
+
+ if (!packet)
+ return NULL;
+
+ INIT_LIST_HEAD(&packet->queue);
+ packet->dest_addr = dest_addr;
+ packet->protocol = protocol;
+ packet->length = data_size;
+
+ return packet;
+}
+
+static void *alloc_ctrl_packet(int header_size,
+ unsigned char dest_addr,
+ unsigned char protocol,
+ unsigned char sig_no)
+{
+ /*
+ * sig_no is located right after ipw_tx_packet struct in every
+ * CTRL or SETUP packets, we can use ipw_control_packet as a
+ * common struct
+ */
+ struct ipw_control_packet *packet = kzalloc(header_size, GFP_ATOMIC);
+
+ if (!packet)
+ return NULL;
+
+ INIT_LIST_HEAD(&packet->header.queue);
+ packet->header.dest_addr = dest_addr;
+ packet->header.protocol = protocol;
+ packet->header.length = header_size - sizeof(struct ipw_tx_packet);
+ packet->body.sig_no = sig_no;
+
+ return packet;
+}
+
+int ipwireless_send_packet(struct ipw_hardware *hw, unsigned int channel_idx,
+ unsigned char *data, unsigned int length,
+ void (*callback) (void *cb, unsigned int length),
+ void *callback_data)
+{
+ struct ipw_tx_packet *packet;
+
+ packet = alloc_data_packet(length,
+ (unsigned char) (channel_idx + 1),
+ TL_PROTOCOLID_COM_DATA);
+ if (!packet)
+ return -ENOMEM;
+ packet->packet_callback = callback;
+ packet->callback_data = callback_data;
+ memcpy((unsigned char *) packet +
+ sizeof(struct ipw_tx_packet), data, length);
+
+ send_packet(hw, PRIO_DATA, packet);
+ return 0;
+}
+
+static int set_control_line(struct ipw_hardware *hw, int prio,
+ unsigned int channel_idx, int line, int state)
+{
+ struct ipw_control_packet *packet;
+ int protocolid = TL_PROTOCOLID_COM_CTRL;
+
+ if (prio == PRIO_SETUP)
+ protocolid = TL_PROTOCOLID_SETUP;
+
+ packet = alloc_ctrl_packet(sizeof(struct ipw_control_packet),
+ (unsigned char) (channel_idx + 1),
+ protocolid, line);
+ if (!packet)
+ return -ENOMEM;
+ packet->header.length = sizeof(struct ipw_control_packet_body);
+ packet->body.value = (unsigned char) (state == 0 ? 0 : 1);
+ send_packet(hw, prio, &packet->header);
+ return 0;
+}
+
+
+static int set_DTR(struct ipw_hardware *hw, int priority,
+ unsigned int channel_idx, int state)
+{
+ if (state != 0)
+ hw->control_lines[channel_idx] |= IPW_CONTROL_LINE_DTR;
+ else
+ hw->control_lines[channel_idx] &= ~IPW_CONTROL_LINE_DTR;
+
+ return set_control_line(hw, priority, channel_idx, COMCTRL_DTR, state);
+}
+
+static int set_RTS(struct ipw_hardware *hw, int priority,
+ unsigned int channel_idx, int state)
+{
+ if (state != 0)
+ hw->control_lines[channel_idx] |= IPW_CONTROL_LINE_RTS;
+ else
+ hw->control_lines[channel_idx] &= ~IPW_CONTROL_LINE_RTS;
+
+ return set_control_line(hw, priority, channel_idx, COMCTRL_RTS, state);
+}
+
+int ipwireless_set_DTR(struct ipw_hardware *hw, unsigned int channel_idx,
+ int state)
+{
+ return set_DTR(hw, PRIO_CTRL, channel_idx, state);
+}
+
+int ipwireless_set_RTS(struct ipw_hardware *hw, unsigned int channel_idx,
+ int state)
+{
+ return set_RTS(hw, PRIO_CTRL, channel_idx, state);
+}
+
+struct ipw_setup_get_version_query_packet {
+ struct ipw_tx_packet header;
+ struct tl_setup_get_version_qry body;
+};
+
+struct ipw_setup_config_packet {
+ struct ipw_tx_packet header;
+ struct tl_setup_config_msg body;
+};
+
+struct ipw_setup_config_done_packet {
+ struct ipw_tx_packet header;
+ struct tl_setup_config_done_msg body;
+};
+
+struct ipw_setup_open_packet {
+ struct ipw_tx_packet header;
+ struct tl_setup_open_msg body;
+};
+
+struct ipw_setup_info_packet {
+ struct ipw_tx_packet header;
+ struct tl_setup_info_msg body;
+};
+
+struct ipw_setup_reboot_msg_ack {
+ struct ipw_tx_packet header;
+ struct TlSetupRebootMsgAck body;
+};
+
+/* This handles the actual initialization of the card */
+static void __handle_setup_get_version_rsp(struct ipw_hardware *hw)
+{
+ struct ipw_setup_config_packet *config_packet;
+ struct ipw_setup_config_done_packet *config_done_packet;
+ struct ipw_setup_open_packet *open_packet;
+ struct ipw_setup_info_packet *info_packet;
+ int port;
+ unsigned int channel_idx;
+
+ /* generate config packet */
+ for (port = 1; port <= NL_NUM_OF_ADDRESSES; port++) {
+ config_packet = alloc_ctrl_packet(
+ sizeof(struct ipw_setup_config_packet),
+ ADDR_SETUP_PROT,
+ TL_PROTOCOLID_SETUP,
+ TL_SETUP_SIGNO_CONFIG_MSG);
+ if (!config_packet)
+ goto exit_nomem;
+ config_packet->header.length = sizeof(struct tl_setup_config_msg);
+ config_packet->body.port_no = port;
+ config_packet->body.prio_data = PRIO_DATA;
+ config_packet->body.prio_ctrl = PRIO_CTRL;
+ send_packet(hw, PRIO_SETUP, &config_packet->header);
+ }
+ config_done_packet = alloc_ctrl_packet(
+ sizeof(struct ipw_setup_config_done_packet),
+ ADDR_SETUP_PROT,
+ TL_PROTOCOLID_SETUP,
+ TL_SETUP_SIGNO_CONFIG_DONE_MSG);
+ if (!config_done_packet)
+ goto exit_nomem;
+ config_done_packet->header.length = sizeof(struct tl_setup_config_done_msg);
+ send_packet(hw, PRIO_SETUP, &config_done_packet->header);
+
+ /* generate open packet */
+ for (port = 1; port <= NL_NUM_OF_ADDRESSES; port++) {
+ open_packet = alloc_ctrl_packet(
+ sizeof(struct ipw_setup_open_packet),
+ ADDR_SETUP_PROT,
+ TL_PROTOCOLID_SETUP,
+ TL_SETUP_SIGNO_OPEN_MSG);
+ if (!open_packet)
+ goto exit_nomem;
+ open_packet->header.length = sizeof(struct tl_setup_open_msg);
+ open_packet->body.port_no = port;
+ send_packet(hw, PRIO_SETUP, &open_packet->header);
+ }
+ for (channel_idx = 0;
+ channel_idx < NL_NUM_OF_ADDRESSES; channel_idx++) {
+ int ret;
+
+ ret = set_DTR(hw, PRIO_SETUP, channel_idx,
+ (hw->control_lines[channel_idx] &
+ IPW_CONTROL_LINE_DTR) != 0);
+ if (ret) {
+ printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+ ": error setting DTR (%d)\n", ret);
+ return;
+ }
+
+ set_RTS(hw, PRIO_SETUP, channel_idx,
+ (hw->control_lines [channel_idx] &
+ IPW_CONTROL_LINE_RTS) != 0);
+ if (ret) {
+ printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+ ": error setting RTS (%d)\n", ret);
+ return;
+ }
+ }
+ /*
+ * For NDIS we assume that we are using sync PPP frames, for COM async.
+ * This driver uses NDIS mode too. We don't bother with translation
+ * from async -> sync PPP.
+ */
+ info_packet = alloc_ctrl_packet(sizeof(struct ipw_setup_info_packet),
+ ADDR_SETUP_PROT,
+ TL_PROTOCOLID_SETUP,
+ TL_SETUP_SIGNO_INFO_MSG);
+ if (!info_packet)
+ goto exit_nomem;
+ info_packet->header.length = sizeof(struct tl_setup_info_msg);
+ info_packet->body.driver_type = NDISWAN_DRIVER;
+ info_packet->body.major_version = NDISWAN_DRIVER_MAJOR_VERSION;
+ info_packet->body.minor_version = NDISWAN_DRIVER_MINOR_VERSION;
+ send_packet(hw, PRIO_SETUP, &info_packet->header);
+
+ /* Initialization is now complete, so we clear the 'to_setup' flag */
+ hw->to_setup = 0;
+
+ return;
+
+exit_nomem:
+ printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+ ": not enough memory to alloc control packet\n");
+ hw->to_setup = -1;
+}
+
+static void handle_setup_get_version_rsp(struct ipw_hardware *hw,
+ unsigned char vers_no)
+{
+ del_timer(&hw->setup_timer);
+ hw->initializing = 0;
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": card is ready.\n");
+
+ if (vers_no == TL_SETUP_VERSION)
+ __handle_setup_get_version_rsp(hw);
+ else
+ printk(KERN_ERR
+ IPWIRELESS_PCCARD_NAME
+ ": invalid hardware version no %u\n",
+ (unsigned int) vers_no);
+}
+
+static void ipw_send_setup_packet(struct ipw_hardware *hw)
+{
+ struct ipw_setup_get_version_query_packet *ver_packet;
+
+ ver_packet = alloc_ctrl_packet(
+ sizeof(struct ipw_setup_get_version_query_packet),
+ ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP,
+ TL_SETUP_SIGNO_GET_VERSION_QRY);
+ ver_packet->header.length = sizeof(struct tl_setup_get_version_qry);
+
+ /*
+ * Response is handled in handle_received_SETUP_packet
+ */
+ send_packet(hw, PRIO_SETUP, &ver_packet->header);
+}
+
+static void handle_received_SETUP_packet(struct ipw_hardware *hw,
+ unsigned int address,
+ unsigned char *data, int len,
+ int is_last)
+{
+ union ipw_setup_rx_msg *rx_msg = (union ipw_setup_rx_msg *) data;
+
+ if (address != ADDR_SETUP_PROT) {
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": setup packet has bad address %d\n", address);
+ return;
+ }
+
+ switch (rx_msg->sig_no) {
+ case TL_SETUP_SIGNO_GET_VERSION_RSP:
+ if (hw->to_setup)
+ handle_setup_get_version_rsp(hw,
+ rx_msg->version_rsp_msg.version);
+ break;
+
+ case TL_SETUP_SIGNO_OPEN_MSG:
+ if (ipwireless_debug) {
+ unsigned int channel_idx = rx_msg->open_msg.port_no - 1;
+
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": OPEN_MSG [channel %u] reply received\n",
+ channel_idx);
+ }
+ break;
+
+ case TL_SETUP_SIGNO_INFO_MSG_ACK:
+ if (ipwireless_debug)
+ printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
+ ": card successfully configured as NDISWAN\n");
+ break;
+
+ case TL_SETUP_SIGNO_REBOOT_MSG:
+ if (hw->to_setup)
+ printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
+ ": Setup not completed - ignoring reboot msg\n");
+ else {
+ struct ipw_setup_reboot_msg_ack *packet;
+
+ printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
+ ": Acknowledging REBOOT message\n");
+ packet = alloc_ctrl_packet(
+ sizeof(struct ipw_setup_reboot_msg_ack),
+ ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP,
+ TL_SETUP_SIGNO_REBOOT_MSG_ACK);
+ packet->header.length =
+ sizeof(struct TlSetupRebootMsgAck);
+ send_packet(hw, PRIO_SETUP, &packet->header);
+ if (hw->reboot_callback)
+ hw->reboot_callback(hw->reboot_callback_data);
+ }
+ break;
+
+ default:
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": unknown setup message %u received\n",
+ (unsigned int) rx_msg->sig_no);
+ }
+}
+
+static void do_close_hardware(struct ipw_hardware *hw)
+{
+ unsigned int irqn;
+
+ if (hw->hw_version == HW_VERSION_1) {
+ /* Disable TX and RX interrupts. */
+ outw(0, hw->base_port + IOIER);
+
+ /* Acknowledge any outstanding interrupt requests */
+ irqn = inw(hw->base_port + IOIR);
+ if (irqn & IR_TXINTR)
+ outw(IR_TXINTR, hw->base_port + IOIR);
+ if (irqn & IR_RXINTR)
+ outw(IR_RXINTR, hw->base_port + IOIR);
+
+ synchronize_irq(hw->irq);
+ }
+}
+
+struct ipw_hardware *ipwireless_hardware_create(void)
+{
+ int i;
+ struct ipw_hardware *hw =
+ kzalloc(sizeof(struct ipw_hardware), GFP_KERNEL);
+
+ if (!hw)
+ return NULL;
+
+ hw->irq = -1;
+ hw->initializing = 1;
+ hw->tx_ready = 1;
+ hw->rx_bytes_queued = 0;
+ hw->rx_pool_size = 0;
+ hw->last_memtx_serial = (unsigned short) 0xffff;
+ for (i = 0; i < NL_NUM_OF_PRIORITIES; i++)
+ INIT_LIST_HEAD(&hw->tx_queue[i]);
+
+ INIT_LIST_HEAD(&hw->rx_queue);
+ INIT_LIST_HEAD(&hw->rx_pool);
+ spin_lock_init(&hw->spinlock);
+ tasklet_init(&hw->tasklet, ipwireless_do_tasklet, (unsigned long) hw);
+ INIT_WORK(&hw->work_rx, ipw_receive_data_work);
+ setup_timer(&hw->setup_timer, ipwireless_setup_timer,
+ (unsigned long) hw);
+
+ return hw;
+}
+
+void ipwireless_init_hardware_v1(struct ipw_hardware *hw,
+ unsigned int base_port,
+ void __iomem *attr_memory,
+ void __iomem *common_memory,
+ int is_v2_card,
+ void (*reboot_callback) (void *data),
+ void *reboot_callback_data)
+{
+ if (hw->removed) {
+ hw->removed = 0;
+ enable_irq(hw->irq);
+ }
+ hw->base_port = base_port;
+ hw->hw_version = is_v2_card ? HW_VERSION_2 : HW_VERSION_1;
+ hw->ll_mtu = hw->hw_version == HW_VERSION_1 ? LL_MTU_V1 : LL_MTU_V2;
+ hw->memregs_CCR = (struct MEMCCR __iomem *)
+ ((unsigned short __iomem *) attr_memory + 0x200);
+ hw->memory_info_regs = (struct MEMINFREG __iomem *) common_memory;
+ hw->memreg_tx = &hw->memory_info_regs->memreg_tx_new;
+ hw->reboot_callback = reboot_callback;
+ hw->reboot_callback_data = reboot_callback_data;
+}
+
+void ipwireless_init_hardware_v2_v3(struct ipw_hardware *hw)
+{
+ hw->initializing = 1;
+ hw->init_loops = 0;
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": waiting for card to start up...\n");
+ ipwireless_setup_timer((unsigned long) hw);
+}
+
+static void ipwireless_setup_timer(unsigned long data)
+{
+ struct ipw_hardware *hw = (struct ipw_hardware *) data;
+
+ hw->init_loops++;
+
+ if (hw->init_loops == TL_SETUP_MAX_VERSION_QRY &&
+ hw->hw_version == HW_VERSION_2 &&
+ hw->memreg_tx == &hw->memory_info_regs->memreg_tx_new) {
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": failed to startup using TX2, trying TX\n");
+
+ hw->memreg_tx = &hw->memory_info_regs->memreg_tx_old;
+ hw->init_loops = 0;
+ }
+ /* Give up after a certain number of retries */
+ if (hw->init_loops == TL_SETUP_MAX_VERSION_QRY) {
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": card failed to start up!\n");
+ hw->initializing = 0;
+ } else {
+ /* Do not attempt to write to the board if it is not present. */
+ if (is_card_present(hw)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->spinlock, flags);
+ hw->to_setup = 1;
+ hw->tx_ready = 1;
+ spin_unlock_irqrestore(&hw->spinlock, flags);
+ tasklet_schedule(&hw->tasklet);
+ }
+
+ mod_timer(&hw->setup_timer,
+ jiffies + msecs_to_jiffies(TL_SETUP_VERSION_QRY_TMO));
+ }
+}
+
+/*
+ * Stop any interrupts from executing so that, once this function returns,
+ * other layers of the driver can be sure they won't get any more callbacks.
+ * Thus must be called on a proper process context.
+ */
+void ipwireless_stop_interrupts(struct ipw_hardware *hw)
+{
+ if (!hw->shutting_down) {
+ /* Tell everyone we are going down. */
+ hw->shutting_down = 1;
+ del_timer(&hw->setup_timer);
+
+ /* Prevent the hardware from sending any more interrupts */
+ do_close_hardware(hw);
+ }
+}
+
+void ipwireless_hardware_free(struct ipw_hardware *hw)
+{
+ int i;
+ struct ipw_rx_packet *rp, *rq;
+ struct ipw_tx_packet *tp, *tq;
+
+ ipwireless_stop_interrupts(hw);
+
+ flush_scheduled_work();
+
+ for (i = 0; i < NL_NUM_OF_ADDRESSES; i++)
+ if (hw->packet_assembler[i] != NULL)
+ kfree(hw->packet_assembler[i]);
+
+ for (i = 0; i < NL_NUM_OF_PRIORITIES; i++)
+ list_for_each_entry_safe(tp, tq, &hw->tx_queue[i], queue) {
+ list_del(&tp->queue);
+ kfree(tp);
+ }
+
+ list_for_each_entry_safe(rp, rq, &hw->rx_queue, queue) {
+ list_del(&rp->queue);
+ kfree(rp);
+ }
+
+ list_for_each_entry_safe(rp, rq, &hw->rx_pool, queue) {
+ list_del(&rp->queue);
+ kfree(rp);
+ }
+ kfree(hw);
+}
+
+/*
+ * Associate the specified network with this hardware, so it will receive events
+ * from it.
+ */
+void ipwireless_associate_network(struct ipw_hardware *hw,
+ struct ipw_network *network)
+{
+ hw->network = network;
+}
diff --git a/trunk/drivers/char/pcmcia/ipwireless/hardware.h b/trunk/drivers/char/pcmcia/ipwireless/hardware.h
new file mode 100644
index 000000000000..c83190ffb0e7
--- /dev/null
+++ b/trunk/drivers/char/pcmcia/ipwireless/hardware.h
@@ -0,0 +1,64 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ * by Stephen Blackheath ,
+ * Ben Martel
+ *
+ * Copyrighted as follows:
+ * Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ * Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ * Copyright (C) 2007 David Sterba
+ */
+
+#ifndef _IPWIRELESS_CS_HARDWARE_H_
+#define _IPWIRELESS_CS_HARDWARE_H_
+
+#include
+#include
+#include
+
+#define IPW_CONTROL_LINE_CTS 0x0001
+#define IPW_CONTROL_LINE_DCD 0x0002
+#define IPW_CONTROL_LINE_DSR 0x0004
+#define IPW_CONTROL_LINE_RI 0x0008
+#define IPW_CONTROL_LINE_DTR 0x0010
+#define IPW_CONTROL_LINE_RTS 0x0020
+
+struct ipw_hardware;
+struct ipw_network;
+
+struct ipw_hardware *ipwireless_hardware_create(void);
+void ipwireless_hardware_free(struct ipw_hardware *hw);
+irqreturn_t ipwireless_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+int ipwireless_set_DTR(struct ipw_hardware *hw, unsigned int channel_idx,
+ int state);
+int ipwireless_set_RTS(struct ipw_hardware *hw, unsigned int channel_idx,
+ int state);
+int ipwireless_send_packet(struct ipw_hardware *hw,
+ unsigned int channel_idx,
+ unsigned char *data,
+ unsigned int length,
+ void (*packet_sent_callback) (void *cb,
+ unsigned int length),
+ void *sent_cb_data);
+void ipwireless_associate_network(struct ipw_hardware *hw,
+ struct ipw_network *net);
+void ipwireless_stop_interrupts(struct ipw_hardware *hw);
+void ipwireless_init_hardware_v1(struct ipw_hardware *hw,
+ unsigned int base_port,
+ void __iomem *attr_memory,
+ void __iomem *common_memory,
+ int is_v2_card,
+ void (*reboot_cb) (void *data),
+ void *reboot_cb_data);
+void ipwireless_init_hardware_v2_v3(struct ipw_hardware *hw);
+void ipwireless_sleep(unsigned int tenths);
+int ipwireless_dump_hardware_state(char *p, size_t limit,
+ struct ipw_hardware *hw);
+
+#endif
diff --git a/trunk/drivers/char/pcmcia/ipwireless/main.c b/trunk/drivers/char/pcmcia/ipwireless/main.c
new file mode 100644
index 000000000000..00c7f8407e3e
--- /dev/null
+++ b/trunk/drivers/char/pcmcia/ipwireless/main.c
@@ -0,0 +1,501 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ * by Stephen Blackheath ,
+ * Ben Martel
+ *
+ * Copyrighted as follows:
+ * Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ * Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ * Copyright (C) 2007 David Sterba
+ */
+
+#include "hardware.h"
+#include "network.h"
+#include "main.h"
+#include "tty.h"
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+#include
+#include
+#include
+#include
+
+static struct pcmcia_device_id ipw_ids[] = {
+ PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0100),
+ PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0200),
+ PCMCIA_DEVICE_NULL
+};
+MODULE_DEVICE_TABLE(pcmcia, ipw_ids);
+
+static void ipwireless_detach(struct pcmcia_device *link);
+
+/*
+ * Module params
+ */
+/* Debug mode: more verbose, print sent/recv bytes */
+int ipwireless_debug;
+int ipwireless_loopback;
+int ipwireless_out_queue = 1;
+
+module_param_named(debug, ipwireless_debug, int, 0);
+module_param_named(loopback, ipwireless_loopback, int, 0);
+module_param_named(out_queue, ipwireless_out_queue, int, 0);
+MODULE_PARM_DESC(debug, "switch on debug messages [0]");
+MODULE_PARM_DESC(loopback,
+ "debug: enable ras_raw channel [0]");
+MODULE_PARM_DESC(out_queue, "debug: set size of outgoing queue [1]");
+
+/* Executes in process context. */
+static void signalled_reboot_work(struct work_struct *work_reboot)
+{
+ struct ipw_dev *ipw = container_of(work_reboot, struct ipw_dev,
+ work_reboot);
+ struct pcmcia_device *link = ipw->link;
+ int ret = pccard_reset_card(link->socket);
+
+ if (ret != CS_SUCCESS)
+ cs_error(link, ResetCard, ret);
+}
+
+static void signalled_reboot_callback(void *callback_data)
+{
+ struct ipw_dev *ipw = (struct ipw_dev *) callback_data;
+
+ /* Delegate to process context. */
+ schedule_work(&ipw->work_reboot);
+}
+
+static int config_ipwireless(struct ipw_dev *ipw)
+{
+ struct pcmcia_device *link = ipw->link;
+ int ret;
+ config_info_t conf;
+ tuple_t tuple;
+ unsigned short buf[64];
+ cisparse_t parse;
+ unsigned short cor_value;
+ win_req_t request_attr_memory;
+ win_req_t request_common_memory;
+ memreq_t memreq_attr_memory;
+ memreq_t memreq_common_memory;
+
+ ipw->is_v2_card = 0;
+
+ tuple.Attributes = 0;
+ tuple.TupleData = (cisdata_t *) buf;
+ tuple.TupleDataMax = sizeof(buf);
+ tuple.TupleOffset = 0;
+
+ tuple.DesiredTuple = RETURN_FIRST_TUPLE;
+
+ ret = pcmcia_get_first_tuple(link, &tuple);
+
+ while (ret == 0) {
+ ret = pcmcia_get_tuple_data(link, &tuple);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, GetTupleData, ret);
+ goto exit0;
+ }
+ ret = pcmcia_get_next_tuple(link, &tuple);
+ }
+
+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+
+ ret = pcmcia_get_first_tuple(link, &tuple);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, GetFirstTuple, ret);
+ goto exit0;
+ }
+
+ ret = pcmcia_get_tuple_data(link, &tuple);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, GetTupleData, ret);
+ goto exit0;
+ }
+
+ ret = pcmcia_parse_tuple(link, &tuple, &parse);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, ParseTuple, ret);
+ goto exit0;
+ }
+
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
+ link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
+ link->io.IOAddrLines = 16;
+
+ link->irq.IRQInfo1 = parse.cftable_entry.irq.IRQInfo1;
+
+ /* 0x40 causes it to generate level mode interrupts. */
+ /* 0x04 enables IREQ pin. */
+ cor_value = parse.cftable_entry.index | 0x44;
+ link->conf.ConfigIndex = cor_value;
+
+ /* IRQ and I/O settings */
+ tuple.DesiredTuple = CISTPL_CONFIG;
+
+ ret = pcmcia_get_first_tuple(link, &tuple);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, GetFirstTuple, ret);
+ goto exit0;
+ }
+
+ ret = pcmcia_get_tuple_data(link, &tuple);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, GetTupleData, ret);
+ goto exit0;
+ }
+
+ ret = pcmcia_parse_tuple(link, &tuple, &parse);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, GetTupleData, ret);
+ goto exit0;
+ }
+ link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->conf.ConfigBase = parse.config.base;
+ link->conf.Present = parse.config.rmask[0];
+ link->conf.IntType = INT_MEMORY_AND_IO;
+
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
+ link->irq.Handler = ipwireless_interrupt;
+ link->irq.Instance = ipw->hardware;
+
+ ret = pcmcia_request_io(link, &link->io);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, RequestIO, ret);
+ goto exit0;
+ }
+
+ /* memory settings */
+
+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+
+ ret = pcmcia_get_first_tuple(link, &tuple);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, GetFirstTuple, ret);
+ goto exit1;
+ }
+
+ ret = pcmcia_get_tuple_data(link, &tuple);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, GetTupleData, ret);
+ goto exit1;
+ }
+
+ ret = pcmcia_parse_tuple(link, &tuple, &parse);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, ParseTuple, ret);
+ goto exit1;
+ }
+
+ if (parse.cftable_entry.mem.nwin > 0) {
+ request_common_memory.Attributes =
+ WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE;
+ request_common_memory.Base =
+ parse.cftable_entry.mem.win[0].host_addr;
+ request_common_memory.Size = parse.cftable_entry.mem.win[0].len;
+ if (request_common_memory.Size < 0x1000)
+ request_common_memory.Size = 0x1000;
+ request_common_memory.AccessSpeed = 0;
+
+ ret = pcmcia_request_window(&link, &request_common_memory,
+ &ipw->handle_common_memory);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, RequestWindow, ret);
+ goto exit1;
+ }
+
+ memreq_common_memory.CardOffset =
+ parse.cftable_entry.mem.win[0].card_addr;
+ memreq_common_memory.Page = 0;
+
+ ret = pcmcia_map_mem_page(ipw->handle_common_memory,
+ &memreq_common_memory);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, MapMemPage, ret);
+ goto exit1;
+ }
+
+ ipw->is_v2_card =
+ parse.cftable_entry.mem.win[0].len == 0x100;
+
+ ipw->common_memory = ioremap(request_common_memory.Base,
+ request_common_memory.Size);
+
+ request_attr_memory.Attributes =
+ WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | WIN_ENABLE;
+ request_attr_memory.Base = 0;
+ request_attr_memory.Size = 0; /* this used to be 0x1000 */
+ request_attr_memory.AccessSpeed = 0;
+
+ ret = pcmcia_request_window(&link, &request_attr_memory,
+ &ipw->handle_attr_memory);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, RequestWindow, ret);
+ goto exit2;
+ }
+
+ memreq_attr_memory.CardOffset = 0;
+ memreq_attr_memory.Page = 0;
+
+ ret = pcmcia_map_mem_page(ipw->handle_attr_memory,
+ &memreq_attr_memory);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, MapMemPage, ret);
+ goto exit2;
+ }
+
+ ipw->attr_memory = ioremap(request_attr_memory.Base,
+ request_attr_memory.Size);
+ }
+
+ INIT_WORK(&ipw->work_reboot, signalled_reboot_work);
+
+ ipwireless_init_hardware_v1(ipw->hardware, link->io.BasePort1,
+ ipw->attr_memory, ipw->common_memory,
+ ipw->is_v2_card, signalled_reboot_callback,
+ ipw);
+
+ ret = pcmcia_request_irq(link, &link->irq);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, RequestIRQ, ret);
+ goto exit3;
+ }
+
+ /* Look up current Vcc */
+
+ ret = pcmcia_get_configuration_info(link, &conf);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, GetConfigurationInfo, ret);
+ goto exit4;
+ }
+
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n",
+ ipw->is_v2_card ? "V2/V3" : "V1");
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": I/O ports 0x%04x-0x%04x, irq %d\n",
+ (unsigned int) link->io.BasePort1,
+ (unsigned int) (link->io.BasePort1 +
+ link->io.NumPorts1 - 1),
+ (unsigned int) link->irq.AssignedIRQ);
+ if (ipw->attr_memory && ipw->common_memory)
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": attr memory 0x%08lx-0x%08lx, "
+ "common memory 0x%08lx-0x%08lx\n",
+ request_attr_memory.Base,
+ request_attr_memory.Base
+ + request_attr_memory.Size - 1,
+ request_common_memory.Base,
+ request_common_memory.Base
+ + request_common_memory.Size - 1);
+
+ ipw->network = ipwireless_network_create(ipw->hardware);
+ if (!ipw->network)
+ goto exit3;
+
+ ipw->tty = ipwireless_tty_create(ipw->hardware, ipw->network,
+ ipw->nodes);
+ if (!ipw->tty)
+ goto exit3;
+
+ ipwireless_init_hardware_v2_v3(ipw->hardware);
+
+ /*
+ * Do the RequestConfiguration last, because it enables interrupts.
+ * Then we don't get any interrupts before we're ready for them.
+ */
+ ret = pcmcia_request_configuration(link, &link->conf);
+
+ if (ret != CS_SUCCESS) {
+ cs_error(link, RequestConfiguration, ret);
+ goto exit4;
+ }
+
+ link->dev_node = &ipw->nodes[0];
+
+ return 0;
+
+exit4:
+ pcmcia_disable_device(link);
+exit3:
+ if (ipw->attr_memory) {
+ iounmap(ipw->attr_memory);
+ pcmcia_release_window(ipw->handle_attr_memory);
+ pcmcia_disable_device(link);
+ }
+exit2:
+ if (ipw->common_memory) {
+ iounmap(ipw->common_memory);
+ pcmcia_release_window(ipw->handle_common_memory);
+ }
+exit1:
+ pcmcia_disable_device(link);
+exit0:
+ return -1;
+}
+
+static void release_ipwireless(struct ipw_dev *ipw)
+{
+ struct pcmcia_device *link = ipw->link;
+
+ pcmcia_disable_device(link);
+
+ if (ipw->common_memory)
+ iounmap(ipw->common_memory);
+ if (ipw->attr_memory)
+ iounmap(ipw->attr_memory);
+ if (ipw->common_memory)
+ pcmcia_release_window(ipw->handle_common_memory);
+ if (ipw->attr_memory)
+ pcmcia_release_window(ipw->handle_attr_memory);
+ pcmcia_disable_device(link);
+}
+
+/*
+ * ipwireless_attach() creates an "instance" of the driver, allocating
+ * local data structures for one device (one interface). The device
+ * is registered with Card Services.
+ *
+ * The pcmcia_device structure is initialized, but we don't actually
+ * configure the card at this point -- we wait until we receive a
+ * card insertion event.
+ */
+static int ipwireless_attach(struct pcmcia_device *link)
+{
+ struct ipw_dev *ipw;
+ int ret;
+
+ ipw = kzalloc(sizeof(struct ipw_dev), GFP_KERNEL);
+ if (!ipw)
+ return -ENOMEM;
+
+ ipw->link = link;
+ link->priv = ipw;
+ link->irq.Instance = ipw;
+
+ /* Link this device into our device list. */
+ link->dev_node = &ipw->nodes[0];
+
+ ipw->hardware = ipwireless_hardware_create();
+ if (!ipw->hardware) {
+ kfree(ipw);
+ return -ENOMEM;
+ }
+ /* RegisterClient will call config_ipwireless */
+
+ ret = config_ipwireless(ipw);
+
+ if (ret != 0) {
+ cs_error(link, RegisterClient, ret);
+ ipwireless_detach(link);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * This deletes a driver "instance". The device is de-registered with
+ * Card Services. If it has been released, all local data structures
+ * are freed. Otherwise, the structures will be freed when the device
+ * is released.
+ */
+static void ipwireless_detach(struct pcmcia_device *link)
+{
+ struct ipw_dev *ipw = link->priv;
+
+ release_ipwireless(ipw);
+
+ /* Break the link with Card Services */
+ if (link)
+ pcmcia_disable_device(link);
+
+ if (ipw->tty != NULL)
+ ipwireless_tty_free(ipw->tty);
+ if (ipw->network != NULL)
+ ipwireless_network_free(ipw->network);
+ if (ipw->hardware != NULL)
+ ipwireless_hardware_free(ipw->hardware);
+ kfree(ipw);
+}
+
+static struct pcmcia_driver me = {
+ .owner = THIS_MODULE,
+ .probe = ipwireless_attach,
+ .remove = ipwireless_detach,
+ .drv = { .name = IPWIRELESS_PCCARD_NAME },
+ .id_table = ipw_ids
+};
+
+/*
+ * Module insertion : initialisation of the module.
+ * Register the card with cardmgr...
+ */
+static int __init init_ipwireless(void)
+{
+ int ret;
+
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME " "
+ IPWIRELESS_PCMCIA_VERSION " by " IPWIRELESS_PCMCIA_AUTHOR "\n");
+
+ ret = ipwireless_tty_init();
+ if (ret != 0)
+ return ret;
+
+ ret = pcmcia_register_driver(&me);
+ if (ret != 0)
+ ipwireless_tty_release();
+
+ return ret;
+}
+
+/*
+ * Module removal
+ */
+static void __exit exit_ipwireless(void)
+{
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME " "
+ IPWIRELESS_PCMCIA_VERSION " removed\n");
+
+ pcmcia_unregister_driver(&me);
+ ipwireless_tty_release();
+}
+
+module_init(init_ipwireless);
+module_exit(exit_ipwireless);
+
+MODULE_AUTHOR(IPWIRELESS_PCMCIA_AUTHOR);
+MODULE_DESCRIPTION(IPWIRELESS_PCCARD_NAME " " IPWIRELESS_PCMCIA_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/trunk/drivers/char/pcmcia/ipwireless/main.h b/trunk/drivers/char/pcmcia/ipwireless/main.h
new file mode 100644
index 000000000000..1bfdcc8d47d6
--- /dev/null
+++ b/trunk/drivers/char/pcmcia/ipwireless/main.h
@@ -0,0 +1,70 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ * by Stephen Blackheath ,
+ * Ben Martel
+ *
+ * Copyrighted as follows:
+ * Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ * Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ * Copyright (C) 2007 David Sterba
+ */
+
+#ifndef _IPWIRELESS_CS_H_
+#define _IPWIRELESS_CS_H_
+
+#include
+#include
+
+#include
+#include
+#include
+#include
+
+#include "hardware.h"
+
+#define IPWIRELESS_PCCARD_NAME "ipwireless"
+#define IPWIRELESS_PCMCIA_VERSION "1.1"
+#define IPWIRELESS_PCMCIA_AUTHOR \
+ "Stephen Blackheath, Ben Martel, Jiri Kosina and David Sterba"
+
+#define IPWIRELESS_TX_QUEUE_SIZE 262144
+#define IPWIRELESS_RX_QUEUE_SIZE 262144
+
+#define IPWIRELESS_STATE_DEBUG
+
+struct ipw_hardware;
+struct ipw_network;
+struct ipw_tty;
+
+struct ipw_dev {
+ struct pcmcia_device *link;
+ int is_v2_card;
+ window_handle_t handle_attr_memory;
+ void __iomem *attr_memory;
+ window_handle_t handle_common_memory;
+ void __iomem *common_memory;
+ dev_node_t nodes[2];
+ /* Reference to attribute memory, containing CIS data */
+ void *attribute_memory;
+
+ /* Hardware context */
+ struct ipw_hardware *hardware;
+ /* Network layer context */
+ struct ipw_network *network;
+ /* TTY device context */
+ struct ipw_tty *tty;
+ struct work_struct work_reboot;
+};
+
+/* Module parametres */
+extern int ipwireless_debug;
+extern int ipwireless_loopback;
+extern int ipwireless_out_queue;
+
+#endif
diff --git a/trunk/drivers/char/pcmcia/ipwireless/network.c b/trunk/drivers/char/pcmcia/ipwireless/network.c
new file mode 100644
index 000000000000..ff35230058d3
--- /dev/null
+++ b/trunk/drivers/char/pcmcia/ipwireless/network.c
@@ -0,0 +1,512 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ * by Stephen Blackheath ,
+ * Ben Martel
+ *
+ * Copyrighted as follows:
+ * Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ * Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ * Copyright (C) 2007 David Sterba
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include "network.h"
+#include "hardware.h"
+#include "main.h"
+#include "tty.h"
+
+#define MAX_OUTGOING_PACKETS_QUEUED ipwireless_out_queue
+#define MAX_ASSOCIATED_TTYS 2
+
+#define SC_RCV_BITS (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
+
+struct ipw_network {
+ /* Hardware context, used for calls to hardware layer. */
+ struct ipw_hardware *hardware;
+ /* Context for kernel 'generic_ppp' functionality */
+ struct ppp_channel *ppp_channel;
+ /* tty context connected with IPW console */
+ struct ipw_tty *associated_ttys[NO_OF_IPW_CHANNELS][MAX_ASSOCIATED_TTYS];
+ /* True if ppp needs waking up once we're ready to xmit */
+ int ppp_blocked;
+ /* Number of packets queued up in hardware module. */
+ int outgoing_packets_queued;
+ /* Spinlock to avoid interrupts during shutdown */
+ spinlock_t spinlock;
+ struct mutex close_lock;
+
+ /* PPP ioctl data, not actually used anywere */
+ unsigned int flags;
+ unsigned int rbits;
+ u32 xaccm[8];
+ u32 raccm;
+ int mru;
+
+ int shutting_down;
+ unsigned int ras_control_lines;
+
+ struct work_struct work_go_online;
+ struct work_struct work_go_offline;
+};
+
+
+#ifdef IPWIRELESS_STATE_DEBUG
+int ipwireless_dump_network_state(char *p, size_t limit,
+ struct ipw_network *network)
+{
+ return snprintf(p, limit,
+ "debug: ppp_blocked=%d\n"
+ "debug: outgoing_packets_queued=%d\n"
+ "debug: network.shutting_down=%d\n",
+ network->ppp_blocked,
+ network->outgoing_packets_queued,
+ network->shutting_down);
+}
+#endif
+
+static void notify_packet_sent(void *callback_data, unsigned int packet_length)
+{
+ struct ipw_network *network = callback_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&network->spinlock, flags);
+ network->outgoing_packets_queued--;
+ if (network->ppp_channel != NULL) {
+ if (network->ppp_blocked) {
+ network->ppp_blocked = 0;
+ spin_unlock_irqrestore(&network->spinlock, flags);
+ ppp_output_wakeup(network->ppp_channel);
+ if (ipwireless_debug)
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": ppp unblocked\n");
+ } else
+ spin_unlock_irqrestore(&network->spinlock, flags);
+ } else
+ spin_unlock_irqrestore(&network->spinlock, flags);
+}
+
+/*
+ * Called by the ppp system when it has a packet to send to the hardware.
+ */
+static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
+ struct sk_buff *skb)
+{
+ struct ipw_network *network = ppp_channel->private;
+ unsigned long flags;
+
+ spin_lock_irqsave(&network->spinlock, flags);
+ if (network->outgoing_packets_queued < MAX_OUTGOING_PACKETS_QUEUED) {
+ unsigned char *buf;
+ static unsigned char header[] = {
+ PPP_ALLSTATIONS, /* 0xff */
+ PPP_UI, /* 0x03 */
+ };
+ int ret;
+
+ network->outgoing_packets_queued++;
+ spin_unlock_irqrestore(&network->spinlock, flags);
+
+ /*
+ * If we have the requested amount of headroom in the skb we
+ * were handed, then we can add the header efficiently.
+ */
+ if (skb_headroom(skb) >= 2) {
+ memcpy(skb_push(skb, 2), header, 2);
+ ret = ipwireless_send_packet(network->hardware,
+ IPW_CHANNEL_RAS, skb->data,
+ skb->len,
+ notify_packet_sent,
+ network);
+ if (ret == -1) {
+ skb_pull(skb, 2);
+ return 0;
+ }
+ } else {
+ /* Otherwise (rarely) we do it inefficiently. */
+ buf = kmalloc(skb->len + 2, GFP_ATOMIC);
+ if (!buf)
+ return 0;
+ memcpy(buf + 2, skb->data, skb->len);
+ memcpy(buf, header, 2);
+ ret = ipwireless_send_packet(network->hardware,
+ IPW_CHANNEL_RAS, buf,
+ skb->len + 2,
+ notify_packet_sent,
+ network);
+ kfree(buf);
+ if (ret == -1)
+ return 0;
+ }
+ kfree_skb(skb);
+ return 1;
+ } else {
+ /*
+ * Otherwise reject the packet, and flag that the ppp system
+ * needs to be unblocked once we are ready to send.
+ */
+ network->ppp_blocked = 1;
+ spin_unlock_irqrestore(&network->spinlock, flags);
+ return 0;
+ }
+}
+
+/* Handle an ioctl call that has come in via ppp. (copy of ppp_async_ioctl() */
+static int ipwireless_ppp_ioctl(struct ppp_channel *ppp_channel,
+ unsigned int cmd, unsigned long arg)
+{
+ struct ipw_network *network = ppp_channel->private;
+ int err, val;
+ u32 accm[8];
+ int __user *user_arg = (int __user *) arg;
+
+ err = -EFAULT;
+ switch (cmd) {
+ case PPPIOCGFLAGS:
+ val = network->flags | network->rbits;
+ if (put_user(val, user_arg))
+ break;
+ err = 0;
+ break;
+
+ case PPPIOCSFLAGS:
+ if (get_user(val, user_arg))
+ break;
+ network->flags = val & ~SC_RCV_BITS;
+ network->rbits = val & SC_RCV_BITS;
+ err = 0;
+ break;
+
+ case PPPIOCGASYNCMAP:
+ if (put_user(network->xaccm[0], user_arg))
+ break;
+ err = 0;
+ break;
+
+ case PPPIOCSASYNCMAP:
+ if (get_user(network->xaccm[0], user_arg))
+ break;
+ err = 0;
+ break;
+
+ case PPPIOCGRASYNCMAP:
+ if (put_user(network->raccm, user_arg))
+ break;
+ err = 0;
+ break;
+
+ case PPPIOCSRASYNCMAP:
+ if (get_user(network->raccm, user_arg))
+ break;
+ err = 0;
+ break;
+
+ case PPPIOCGXASYNCMAP:
+ if (copy_to_user((void __user *) arg, network->xaccm,
+ sizeof(network->xaccm)))
+ break;
+ err = 0;
+ break;
+
+ case PPPIOCSXASYNCMAP:
+ if (copy_from_user(accm, (void __user *) arg, sizeof(accm)))
+ break;
+ accm[2] &= ~0x40000000U; /* can't escape 0x5e */
+ accm[3] |= 0x60000000U; /* must escape 0x7d, 0x7e */
+ memcpy(network->xaccm, accm, sizeof(network->xaccm));
+ err = 0;
+ break;
+
+ case PPPIOCGMRU:
+ if (put_user(network->mru, user_arg))
+ break;
+ err = 0;
+ break;
+
+ case PPPIOCSMRU:
+ if (get_user(val, user_arg))
+ break;
+ if (val < PPP_MRU)
+ val = PPP_MRU;
+ network->mru = val;
+ err = 0;
+ break;
+
+ default:
+ err = -ENOTTY;
+ }
+
+ return err;
+}
+
+static struct ppp_channel_ops ipwireless_ppp_channel_ops = {
+ .start_xmit = ipwireless_ppp_start_xmit,
+ .ioctl = ipwireless_ppp_ioctl
+};
+
+static void do_go_online(struct work_struct *work_go_online)
+{
+ struct ipw_network *network =
+ container_of(work_go_online, struct ipw_network,
+ work_go_online);
+ unsigned long flags;
+
+ spin_lock_irqsave(&network->spinlock, flags);
+ if (!network->ppp_channel) {
+ struct ppp_channel *channel;
+
+ spin_unlock_irqrestore(&network->spinlock, flags);
+ channel = kzalloc(sizeof(struct ppp_channel), GFP_KERNEL);
+ if (!channel) {
+ printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+ ": unable to allocate PPP channel\n");
+ return;
+ }
+ channel->private = network;
+ channel->mtu = 16384; /* Wild guess */
+ channel->hdrlen = 2;
+ channel->ops = &ipwireless_ppp_channel_ops;
+
+ network->flags = 0;
+ network->rbits = 0;
+ network->mru = PPP_MRU;
+ memset(network->xaccm, 0, sizeof(network->xaccm));
+ network->xaccm[0] = ~0U;
+ network->xaccm[3] = 0x60000000U;
+ network->raccm = ~0U;
+ ppp_register_channel(channel);
+ spin_lock_irqsave(&network->spinlock, flags);
+ network->ppp_channel = channel;
+ }
+ spin_unlock_irqrestore(&network->spinlock, flags);
+}
+
+static void do_go_offline(struct work_struct *work_go_offline)
+{
+ struct ipw_network *network =
+ container_of(work_go_offline, struct ipw_network,
+ work_go_offline);
+ unsigned long flags;
+
+ mutex_lock(&network->close_lock);
+ spin_lock_irqsave(&network->spinlock, flags);
+ if (network->ppp_channel != NULL) {
+ struct ppp_channel *channel = network->ppp_channel;
+
+ network->ppp_channel = NULL;
+ spin_unlock_irqrestore(&network->spinlock, flags);
+ mutex_unlock(&network->close_lock);
+ ppp_unregister_channel(channel);
+ } else {
+ spin_unlock_irqrestore(&network->spinlock, flags);
+ mutex_unlock(&network->close_lock);
+ }
+}
+
+void ipwireless_network_notify_control_line_change(struct ipw_network *network,
+ unsigned int channel_idx,
+ unsigned int control_lines,
+ unsigned int changed_mask)
+{
+ int i;
+
+ if (channel_idx == IPW_CHANNEL_RAS)
+ network->ras_control_lines = control_lines;
+
+ for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) {
+ struct ipw_tty *tty =
+ network->associated_ttys[channel_idx][i];
+
+ /*
+ * If it's associated with a tty (other than the RAS channel
+ * when we're online), then send the data to that tty. The RAS
+ * channel's data is handled above - it always goes through
+ * ppp_generic.
+ */
+ if (tty)
+ ipwireless_tty_notify_control_line_change(tty,
+ channel_idx,
+ control_lines,
+ changed_mask);
+ }
+}
+
+/*
+ * Some versions of firmware stuff packets with 0xff 0x03 (PPP: ALLSTATIONS, UI)
+ * bytes, which are required on sent packet, but not always present on received
+ * packets
+ */
+static struct sk_buff *ipw_packet_received_skb(unsigned char *data,
+ unsigned int length)
+{
+ struct sk_buff *skb;
+
+ if (length > 2 && data[0] == PPP_ALLSTATIONS && data[1] == PPP_UI) {
+ length -= 2;
+ data += 2;
+ }
+
+ skb = dev_alloc_skb(length + 4);
+ skb_reserve(skb, 2);
+ memcpy(skb_put(skb, length), data, length);
+
+ return skb;
+}
+
+void ipwireless_network_packet_received(struct ipw_network *network,
+ unsigned int channel_idx,
+ unsigned char *data,
+ unsigned int length)
+{
+ int i;
+ unsigned long flags;
+
+ for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) {
+ struct ipw_tty *tty = network->associated_ttys[channel_idx][i];
+
+ /*
+ * If it's associated with a tty (other than the RAS channel
+ * when we're online), then send the data to that tty. The RAS
+ * channel's data is handled above - it always goes through
+ * ppp_generic.
+ */
+ if (tty && channel_idx == IPW_CHANNEL_RAS
+ && (network->ras_control_lines &
+ IPW_CONTROL_LINE_DCD) != 0
+ && ipwireless_tty_is_modem(tty)) {
+ /*
+ * If data came in on the RAS channel and this tty is
+ * the modem tty, and we are online, then we send it to
+ * the PPP layer.
+ */
+ mutex_lock(&network->close_lock);
+ spin_lock_irqsave(&network->spinlock, flags);
+ if (network->ppp_channel != NULL) {
+ struct sk_buff *skb;
+
+ spin_unlock_irqrestore(&network->spinlock,
+ flags);
+
+ /* Send the data to the ppp_generic module. */
+ skb = ipw_packet_received_skb(data, length);
+ ppp_input(network->ppp_channel, skb);
+ } else
+ spin_unlock_irqrestore(&network->spinlock,
+ flags);
+ mutex_unlock(&network->close_lock);
+ }
+ /* Otherwise we send it out the tty. */
+ else
+ ipwireless_tty_received(tty, data, length);
+ }
+}
+
+struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw)
+{
+ struct ipw_network *network =
+ kzalloc(sizeof(struct ipw_network), GFP_ATOMIC);
+
+ if (!network)
+ return NULL;
+
+ spin_lock_init(&network->spinlock);
+ mutex_init(&network->close_lock);
+
+ network->hardware = hw;
+
+ INIT_WORK(&network->work_go_online, do_go_online);
+ INIT_WORK(&network->work_go_offline, do_go_offline);
+
+ ipwireless_associate_network(hw, network);
+
+ return network;
+}
+
+void ipwireless_network_free(struct ipw_network *network)
+{
+ network->shutting_down = 1;
+
+ ipwireless_ppp_close(network);
+ flush_scheduled_work();
+
+ ipwireless_stop_interrupts(network->hardware);
+ ipwireless_associate_network(network->hardware, NULL);
+
+ kfree(network);
+}
+
+void ipwireless_associate_network_tty(struct ipw_network *network,
+ unsigned int channel_idx,
+ struct ipw_tty *tty)
+{
+ int i;
+
+ for (i = 0; i < MAX_ASSOCIATED_TTYS; i++)
+ if (network->associated_ttys[channel_idx][i] == NULL) {
+ network->associated_ttys[channel_idx][i] = tty;
+ break;
+ }
+}
+
+void ipwireless_disassociate_network_ttys(struct ipw_network *network,
+ unsigned int channel_idx)
+{
+ int i;
+
+ for (i = 0; i < MAX_ASSOCIATED_TTYS; i++)
+ network->associated_ttys[channel_idx][i] = NULL;
+}
+
+void ipwireless_ppp_open(struct ipw_network *network)
+{
+ if (ipwireless_debug)
+ printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": online\n");
+ schedule_work(&network->work_go_online);
+}
+
+void ipwireless_ppp_close(struct ipw_network *network)
+{
+ /* Disconnect from the wireless network. */
+ if (ipwireless_debug)
+ printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": offline\n");
+ schedule_work(&network->work_go_offline);
+}
+
+int ipwireless_ppp_channel_index(struct ipw_network *network)
+{
+ int ret = -1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&network->spinlock, flags);
+ if (network->ppp_channel != NULL)
+ ret = ppp_channel_index(network->ppp_channel);
+ spin_unlock_irqrestore(&network->spinlock, flags);
+
+ return ret;
+}
+
+int ipwireless_ppp_unit_number(struct ipw_network *network)
+{
+ int ret = -1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&network->spinlock, flags);
+ if (network->ppp_channel != NULL)
+ ret = ppp_unit_number(network->ppp_channel);
+ spin_unlock_irqrestore(&network->spinlock, flags);
+
+ return ret;
+}
diff --git a/trunk/drivers/char/pcmcia/ipwireless/network.h b/trunk/drivers/char/pcmcia/ipwireless/network.h
new file mode 100644
index 000000000000..b0e1e952fd14
--- /dev/null
+++ b/trunk/drivers/char/pcmcia/ipwireless/network.h
@@ -0,0 +1,55 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ * by Stephen Blackheath ,
+ * Ben Martel
+ *
+ * Copyrighted as follows:
+ * Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ * Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ * Copyright (C) 2007 David Sterba
+ */
+
+#ifndef _IPWIRELESS_CS_NETWORK_H_
+#define _IPWIRELESS_CS_NETWORK_H_
+
+#include
+
+struct ipw_network;
+struct ipw_tty;
+struct ipw_hardware;
+
+/* Definitions of the different channels on the PCMCIA UE */
+#define IPW_CHANNEL_RAS 0
+#define IPW_CHANNEL_DIALLER 1
+#define IPW_CHANNEL_CONSOLE 2
+#define NO_OF_IPW_CHANNELS 5
+
+void ipwireless_network_notify_control_line_change(struct ipw_network *net,
+ unsigned int channel_idx, unsigned int control_lines,
+ unsigned int control_mask);
+void ipwireless_network_packet_received(struct ipw_network *net,
+ unsigned int channel_idx, unsigned char *data,
+ unsigned int length);
+struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw);
+void ipwireless_network_free(struct ipw_network *net);
+void ipwireless_associate_network_tty(struct ipw_network *net,
+ unsigned int channel_idx, struct ipw_tty *tty);
+void ipwireless_disassociate_network_ttys(struct ipw_network *net,
+ unsigned int channel_idx);
+
+void ipwireless_ppp_open(struct ipw_network *net);
+
+void ipwireless_ppp_close(struct ipw_network *net);
+int ipwireless_ppp_channel_index(struct ipw_network *net);
+int ipwireless_ppp_unit_number(struct ipw_network *net);
+
+int ipwireless_dump_network_state(char *p, size_t limit,
+ struct ipw_network *net);
+
+#endif
diff --git a/trunk/drivers/char/pcmcia/ipwireless/setup_protocol.h b/trunk/drivers/char/pcmcia/ipwireless/setup_protocol.h
new file mode 100644
index 000000000000..9d6bcc77c73c
--- /dev/null
+++ b/trunk/drivers/char/pcmcia/ipwireless/setup_protocol.h
@@ -0,0 +1,108 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ * by Stephen Blackheath ,
+ * Ben Martel
+ *
+ * Copyrighted as follows:
+ * Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ * Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ * Copyright (C) 2007 David Sterba
+ */
+
+#ifndef _IPWIRELESS_CS_SETUP_PROTOCOL_H_
+#define _IPWIRELESS_CS_SETUP_PROTOCOL_H_
+
+/* Version of the setup protocol and transport protocols */
+#define TL_SETUP_VERSION 1
+
+#define TL_SETUP_VERSION_QRY_TMO 1000
+#define TL_SETUP_MAX_VERSION_QRY 30
+
+/* Message numbers 0-9 are obsoleted and must not be reused! */
+#define TL_SETUP_SIGNO_GET_VERSION_QRY 10
+#define TL_SETUP_SIGNO_GET_VERSION_RSP 11
+#define TL_SETUP_SIGNO_CONFIG_MSG 12
+#define TL_SETUP_SIGNO_CONFIG_DONE_MSG 13
+#define TL_SETUP_SIGNO_OPEN_MSG 14
+#define TL_SETUP_SIGNO_CLOSE_MSG 15
+
+#define TL_SETUP_SIGNO_INFO_MSG 20
+#define TL_SETUP_SIGNO_INFO_MSG_ACK 21
+
+#define TL_SETUP_SIGNO_REBOOT_MSG 22
+#define TL_SETUP_SIGNO_REBOOT_MSG_ACK 23
+
+/* Synchronous start-messages */
+struct tl_setup_get_version_qry {
+ unsigned char sig_no; /* TL_SETUP_SIGNO_GET_VERSION_QRY */
+} __attribute__ ((__packed__));
+
+struct tl_setup_get_version_rsp {
+ unsigned char sig_no; /* TL_SETUP_SIGNO_GET_VERSION_RSP */
+ unsigned char version; /* TL_SETUP_VERSION */
+} __attribute__ ((__packed__));
+
+struct tl_setup_config_msg {
+ unsigned char sig_no; /* TL_SETUP_SIGNO_CONFIG_MSG */
+ unsigned char port_no;
+ unsigned char prio_data;
+ unsigned char prio_ctrl;
+} __attribute__ ((__packed__));
+
+struct tl_setup_config_done_msg {
+ unsigned char sig_no; /* TL_SETUP_SIGNO_CONFIG_DONE_MSG */
+} __attribute__ ((__packed__));
+
+/* Asyncronous messages */
+struct tl_setup_open_msg {
+ unsigned char sig_no; /* TL_SETUP_SIGNO_OPEN_MSG */
+ unsigned char port_no;
+} __attribute__ ((__packed__));
+
+struct tl_setup_close_msg {
+ unsigned char sig_no; /* TL_SETUP_SIGNO_CLOSE_MSG */
+ unsigned char port_no;
+} __attribute__ ((__packed__));
+
+/* Driver type - for use in tl_setup_info_msg.driver_type */
+#define COMM_DRIVER 0
+#define NDISWAN_DRIVER 1
+#define NDISWAN_DRIVER_MAJOR_VERSION 2
+#define NDISWAN_DRIVER_MINOR_VERSION 0
+
+/*
+ * It should not matter when this message comes over as we just store the
+ * results and send the ACK.
+ */
+struct tl_setup_info_msg {
+ unsigned char sig_no; /* TL_SETUP_SIGNO_INFO_MSG */
+ unsigned char driver_type;
+ unsigned char major_version;
+ unsigned char minor_version;
+} __attribute__ ((__packed__));
+
+struct tl_setup_info_msgAck {
+ unsigned char sig_no; /* TL_SETUP_SIGNO_INFO_MSG_ACK */
+} __attribute__ ((__packed__));
+
+struct TlSetupRebootMsgAck {
+ unsigned char sig_no; /* TL_SETUP_SIGNO_REBOOT_MSG_ACK */
+} __attribute__ ((__packed__));
+
+/* Define a union of all the msgs that the driver can receive from the card.*/
+union ipw_setup_rx_msg {
+ unsigned char sig_no;
+ struct tl_setup_get_version_rsp version_rsp_msg;
+ struct tl_setup_open_msg open_msg;
+ struct tl_setup_close_msg close_msg;
+ struct tl_setup_info_msg InfoMsg;
+ struct tl_setup_info_msgAck info_msg_ack;
+} __attribute__ ((__packed__));
+
+#endif /* _IPWIRELESS_CS_SETUP_PROTOCOL_H_ */
diff --git a/trunk/drivers/char/pcmcia/ipwireless/tty.c b/trunk/drivers/char/pcmcia/ipwireless/tty.c
new file mode 100644
index 000000000000..42f3815c5ce3
--- /dev/null
+++ b/trunk/drivers/char/pcmcia/ipwireless/tty.c
@@ -0,0 +1,688 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ * by Stephen Blackheath ,
+ * Ben Martel
+ *
+ * Copyrighted as follows:
+ * Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ * Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ * Copyright (C) 2007 David Sterba
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include "tty.h"
+#include "network.h"
+#include "hardware.h"
+#include "main.h"
+
+#define IPWIRELESS_PCMCIA_START (0)
+#define IPWIRELESS_PCMCIA_MINORS (24)
+#define IPWIRELESS_PCMCIA_MINOR_RANGE (8)
+
+#define TTYTYPE_MODEM (0)
+#define TTYTYPE_MONITOR (1)
+#define TTYTYPE_RAS_RAW (2)
+
+struct ipw_tty {
+ int index;
+ struct ipw_hardware *hardware;
+ unsigned int channel_idx;
+ unsigned int secondary_channel_idx;
+ int tty_type;
+ struct ipw_network *network;
+ struct tty_struct *linux_tty;
+ int open_count;
+ unsigned int control_lines;
+ struct mutex ipw_tty_mutex;
+ int tx_bytes_queued;
+ int closing;
+};
+
+static struct ipw_tty *ttys[IPWIRELESS_PCMCIA_MINORS];
+
+static struct tty_driver *ipw_tty_driver;
+
+static char *tty_type_name(int tty_type)
+{
+ static char *channel_names[] = {
+ "modem",
+ "monitor",
+ "RAS-raw"
+ };
+
+ return channel_names[tty_type];
+}
+
+static void report_registering(struct ipw_tty *tty)
+{
+ char *iftype = tty_type_name(tty->tty_type);
+
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": registering %s device ttyIPWp%d\n", iftype, tty->index);
+}
+
+static void report_deregistering(struct ipw_tty *tty)
+{
+ char *iftype = tty_type_name(tty->tty_type);
+
+ printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+ ": deregistering %s device ttyIPWp%d\n", iftype,
+ tty->index);
+}
+
+static struct ipw_tty *get_tty(int minor)
+{
+ if (minor < ipw_tty_driver->minor_start
+ || minor >= ipw_tty_driver->minor_start +
+ IPWIRELESS_PCMCIA_MINORS)
+ return NULL;
+ else {
+ int minor_offset = minor - ipw_tty_driver->minor_start;
+
+ /*
+ * The 'ras_raw' channel is only available when 'loopback' mode
+ * is enabled.
+ * Number of minor starts with 16 (_RANGE * _RAS_RAW).
+ */
+ if (!ipwireless_loopback &&
+ minor_offset >=
+ IPWIRELESS_PCMCIA_MINOR_RANGE * TTYTYPE_RAS_RAW)
+ return NULL;
+
+ return ttys[minor_offset];
+ }
+}
+
+static int ipw_open(struct tty_struct *linux_tty, struct file *filp)
+{
+ int minor = linux_tty->index;
+ struct ipw_tty *tty = get_tty(minor);
+
+ if (!tty)
+ return -ENODEV;
+
+ mutex_lock(&tty->ipw_tty_mutex);
+
+ if (tty->closing) {
+ mutex_unlock(&tty->ipw_tty_mutex);
+ return -ENODEV;
+ }
+ if (tty->open_count == 0)
+ tty->tx_bytes_queued = 0;
+
+ tty->open_count++;
+
+ tty->linux_tty = linux_tty;
+ linux_tty->driver_data = tty;
+ linux_tty->low_latency = 1;
+
+ if (tty->tty_type == TTYTYPE_MODEM)
+ ipwireless_ppp_open(tty->network);
+
+ mutex_unlock(&tty->ipw_tty_mutex);
+
+ return 0;
+}
+
+static void do_ipw_close(struct ipw_tty *tty)
+{
+ tty->open_count--;
+
+ if (tty->open_count == 0) {
+ struct tty_struct *linux_tty = tty->linux_tty;
+
+ if (linux_tty != NULL) {
+ tty->linux_tty = NULL;
+ linux_tty->driver_data = NULL;
+
+ if (tty->tty_type == TTYTYPE_MODEM)
+ ipwireless_ppp_close(tty->network);
+ }
+ }
+}
+
+static void ipw_hangup(struct tty_struct *linux_tty)
+{
+ struct ipw_tty *tty = linux_tty->driver_data;
+
+ if (!tty)
+ return;
+
+ mutex_lock(&tty->ipw_tty_mutex);
+ if (tty->open_count == 0) {
+ mutex_unlock(&tty->ipw_tty_mutex);
+ return;
+ }
+
+ do_ipw_close(tty);
+
+ mutex_unlock(&tty->ipw_tty_mutex);
+}
+
+static void ipw_close(struct tty_struct *linux_tty, struct file *filp)
+{
+ ipw_hangup(linux_tty);
+}
+
+/* Take data received from hardware, and send it out the tty */
+void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data,
+ unsigned int length)
+{
+ struct tty_struct *linux_tty;
+ int work = 0;
+
+ mutex_lock(&tty->ipw_tty_mutex);
+ linux_tty = tty->linux_tty;
+ if (linux_tty == NULL) {
+ mutex_unlock(&tty->ipw_tty_mutex);
+ return;
+ }
+
+ if (!tty->open_count) {
+ mutex_unlock(&tty->ipw_tty_mutex);
+ return;
+ }
+ mutex_unlock(&tty->ipw_tty_mutex);
+
+ work = tty_insert_flip_string(linux_tty, data, length);
+
+ if (work != length)
+ printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
+ ": %d chars not inserted to flip buffer!\n",
+ length - work);
+
+ /*
+ * This may sleep if ->low_latency is set
+ */
+ if (work)
+ tty_flip_buffer_push(linux_tty);
+}
+
+static void ipw_write_packet_sent_callback(void *callback_data,
+ unsigned int packet_length)
+{
+ struct ipw_tty *tty = callback_data;
+
+ /*
+ * Packet has been sent, so we subtract the number of bytes from our
+ * tally of outstanding TX bytes.
+ */
+ tty->tx_bytes_queued -= packet_length;
+}
+
+static int ipw_write(struct tty_struct *linux_tty,
+ const unsigned char *buf, int count)
+{
+ struct ipw_tty *tty = linux_tty->driver_data;
+ int room, ret;
+
+ if (!tty)
+ return -ENODEV;
+
+ mutex_lock(&tty->ipw_tty_mutex);
+ if (!tty->open_count) {
+ mutex_unlock(&tty->ipw_tty_mutex);
+ return -EINVAL;
+ }
+
+ room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued;
+ if (room < 0)
+ room = 0;
+ /* Don't allow caller to write any more than we have room for */
+ if (count > room)
+ count = room;
+
+ if (count == 0) {
+ mutex_unlock(&tty->ipw_tty_mutex);
+ return 0;
+ }
+
+ ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS,
+ (unsigned char *) buf, count,
+ ipw_write_packet_sent_callback, tty);
+ if (ret == -1) {
+ mutex_unlock(&tty->ipw_tty_mutex);
+ return 0;
+ }
+
+ tty->tx_bytes_queued += count;
+ mutex_unlock(&tty->ipw_tty_mutex);
+
+ return count;
+}
+
+static int ipw_write_room(struct tty_struct *linux_tty)
+{
+ struct ipw_tty *tty = linux_tty->driver_data;
+ int room;
+
+ if (!tty)
+ return -ENODEV;
+
+ if (!tty->open_count)
+ return -EINVAL;
+
+ room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued;
+ if (room < 0)
+ room = 0;
+
+ return room;
+}
+
+static int ipwireless_get_serial_info(struct ipw_tty *tty,
+ struct serial_struct __user *retinfo)
+{
+ struct serial_struct tmp;
+
+ if (!retinfo)
+ return (-EFAULT);
+
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.type = PORT_UNKNOWN;
+ tmp.line = tty->index;
+ tmp.port = 0;
+ tmp.irq = 0;
+ tmp.flags = 0;
+ tmp.baud_base = 115200;
+ tmp.close_delay = 0;
+ tmp.closing_wait = 0;
+ tmp.custom_divisor = 0;
+ tmp.hub6 = 0;
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int ipw_chars_in_buffer(struct tty_struct *linux_tty)
+{
+ struct ipw_tty *tty = linux_tty->driver_data;
+
+ if (!tty)
+ return -ENODEV;
+
+ if (!tty->open_count)
+ return -EINVAL;
+
+ return tty->tx_bytes_queued;
+}
+
+static int get_control_lines(struct ipw_tty *tty)
+{
+ unsigned int my = tty->control_lines;
+ unsigned int out = 0;
+
+ if (my & IPW_CONTROL_LINE_RTS)
+ out |= TIOCM_RTS;
+ if (my & IPW_CONTROL_LINE_DTR)
+ out |= TIOCM_DTR;
+ if (my & IPW_CONTROL_LINE_CTS)
+ out |= TIOCM_CTS;
+ if (my & IPW_CONTROL_LINE_DSR)
+ out |= TIOCM_DSR;
+ if (my & IPW_CONTROL_LINE_DCD)
+ out |= TIOCM_CD;
+
+ return out;
+}
+
+static int set_control_lines(struct ipw_tty *tty, unsigned int set,
+ unsigned int clear)
+{
+ int ret;
+
+ if (set & TIOCM_RTS) {
+ ret = ipwireless_set_RTS(tty->hardware, tty->channel_idx, 1);
+ if (ret)
+ return ret;
+ if (tty->secondary_channel_idx != -1) {
+ ret = ipwireless_set_RTS(tty->hardware,
+ tty->secondary_channel_idx, 1);
+ if (ret)
+ return ret;
+ }
+ }
+ if (set & TIOCM_DTR) {
+ ret = ipwireless_set_DTR(tty->hardware, tty->channel_idx, 1);
+ if (ret)
+ return ret;
+ if (tty->secondary_channel_idx != -1) {
+ ret = ipwireless_set_DTR(tty->hardware,
+ tty->secondary_channel_idx, 1);
+ if (ret)
+ return ret;
+ }
+ }
+ if (clear & TIOCM_RTS) {
+ ret = ipwireless_set_RTS(tty->hardware, tty->channel_idx, 0);
+ if (tty->secondary_channel_idx != -1) {
+ ret = ipwireless_set_RTS(tty->hardware,
+ tty->secondary_channel_idx, 0);
+ if (ret)
+ return ret;
+ }
+ }
+ if (clear & TIOCM_DTR) {
+ ret = ipwireless_set_DTR(tty->hardware, tty->channel_idx, 0);
+ if (tty->secondary_channel_idx != -1) {
+ ret = ipwireless_set_DTR(tty->hardware,
+ tty->secondary_channel_idx, 0);
+ if (ret)
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int ipw_tiocmget(struct tty_struct *linux_tty, struct file *file)
+{
+ struct ipw_tty *tty = linux_tty->driver_data;
+
+ if (!tty)
+ return -ENODEV;
+
+ if (!tty->open_count)
+ return -EINVAL;
+
+ return get_control_lines(tty);
+}
+
+static int
+ipw_tiocmset(struct tty_struct *linux_tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct ipw_tty *tty = linux_tty->driver_data;
+
+ if (!tty)
+ return -ENODEV;
+
+ if (!tty->open_count)
+ return -EINVAL;
+
+ return set_control_lines(tty, set, clear);
+}
+
+static int ipw_ioctl(struct tty_struct *linux_tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct ipw_tty *tty = linux_tty->driver_data;
+
+ if (!tty)
+ return -ENODEV;
+
+ if (!tty->open_count)
+ return -EINVAL;
+
+ switch (cmd) {
+ case TIOCGSERIAL:
+ return ipwireless_get_serial_info(tty, (void __user *) arg);
+
+ case TIOCSSERIAL:
+ return 0; /* Keeps the PCMCIA scripts happy. */
+ }
+
+ if (tty->tty_type == TTYTYPE_MODEM) {
+ switch (cmd) {
+ case PPPIOCGCHAN:
+ {
+ int chan = ipwireless_ppp_channel_index(
+ tty->network);
+
+ if (chan < 0)
+ return -ENODEV;
+ if (put_user(chan, (int __user *) arg))
+ return -EFAULT;
+ }
+ return 0;
+
+ case PPPIOCGUNIT:
+ {
+ int unit = ipwireless_ppp_unit_number(
+ tty->network);
+
+ if (unit < 0)
+ return -ENODEV;
+ if (put_user(unit, (int __user *) arg))
+ return -EFAULT;
+ }
+ return 0;
+
+ case TCGETS:
+ case TCGETA:
+ return n_tty_ioctl(linux_tty, file, cmd, arg);
+
+ case TCFLSH:
+ return n_tty_ioctl(linux_tty, file, cmd, arg);
+
+ case FIONREAD:
+ {
+ int val = 0;
+
+ if (put_user(val, (int __user *) arg))
+ return -EFAULT;
+ }
+ return 0;
+ }
+ }
+
+ return -ENOIOCTLCMD;
+}
+
+static int add_tty(dev_node_t *nodesp, int j,
+ struct ipw_hardware *hardware,
+ struct ipw_network *network, int channel_idx,
+ int secondary_channel_idx, int tty_type)
+{
+ ttys[j] = kzalloc(sizeof(struct ipw_tty), GFP_KERNEL);
+ if (!ttys[j])
+ return -ENOMEM;
+ ttys[j]->index = j;
+ ttys[j]->hardware = hardware;
+ ttys[j]->channel_idx = channel_idx;
+ ttys[j]->secondary_channel_idx = secondary_channel_idx;
+ ttys[j]->network = network;
+ ttys[j]->tty_type = tty_type;
+ mutex_init(&ttys[j]->ipw_tty_mutex);
+
+ tty_register_device(ipw_tty_driver, j, NULL);
+ ipwireless_associate_network_tty(network, channel_idx, ttys[j]);
+
+ if (secondary_channel_idx != -1)
+ ipwireless_associate_network_tty(network,
+ secondary_channel_idx,
+ ttys[j]);
+ if (nodesp != NULL) {
+ sprintf(nodesp->dev_name, "ttyIPWp%d", j);
+ nodesp->major = ipw_tty_driver->major;
+ nodesp->minor = j + ipw_tty_driver->minor_start;
+ }
+ if (get_tty(j + ipw_tty_driver->minor_start) == ttys[j])
+ report_registering(ttys[j]);
+ return 0;
+}
+
+struct ipw_tty *ipwireless_tty_create(struct ipw_hardware *hardware,
+ struct ipw_network *network,
+ dev_node_t *nodes)
+{
+ int i, j;
+
+ for (i = 0; i < IPWIRELESS_PCMCIA_MINOR_RANGE; i++) {
+ int allfree = 1;
+
+ for (j = i; j < IPWIRELESS_PCMCIA_MINORS;
+ j += IPWIRELESS_PCMCIA_MINOR_RANGE)
+ if (ttys[j] != NULL) {
+ allfree = 0;
+ break;
+ }
+
+ if (allfree) {
+ j = i;
+
+ if (add_tty(&nodes[0], j, hardware, network,
+ IPW_CHANNEL_DIALLER, IPW_CHANNEL_RAS,
+ TTYTYPE_MODEM))
+ return NULL;
+
+ j += IPWIRELESS_PCMCIA_MINOR_RANGE;
+ if (add_tty(&nodes[1], j, hardware, network,
+ IPW_CHANNEL_DIALLER, -1,
+ TTYTYPE_MONITOR))
+ return NULL;
+
+ j += IPWIRELESS_PCMCIA_MINOR_RANGE;
+ if (add_tty(NULL, j, hardware, network,
+ IPW_CHANNEL_RAS, -1,
+ TTYTYPE_RAS_RAW))
+ return NULL;
+
+ nodes[0].next = &nodes[1];
+ nodes[1].next = NULL;
+
+ return ttys[i];
+ }
+ }
+ return NULL;
+}
+
+/*
+ * Must be called before ipwireless_network_free().
+ */
+void ipwireless_tty_free(struct ipw_tty *tty)
+{
+ int j;
+ struct ipw_network *network = ttys[tty->index]->network;
+
+ for (j = tty->index; j < IPWIRELESS_PCMCIA_MINORS;
+ j += IPWIRELESS_PCMCIA_MINOR_RANGE) {
+ struct ipw_tty *ttyj = ttys[j];
+
+ if (ttyj) {
+ mutex_lock(&ttyj->ipw_tty_mutex);
+ if (get_tty(j + ipw_tty_driver->minor_start) == ttyj)
+ report_deregistering(ttyj);
+ ttyj->closing = 1;
+ if (ttyj->linux_tty != NULL) {
+ mutex_unlock(&ttyj->ipw_tty_mutex);
+ tty_hangup(ttyj->linux_tty);
+ /* Wait till the tty_hangup has completed */
+ flush_scheduled_work();
+ mutex_lock(&ttyj->ipw_tty_mutex);
+ }
+ while (ttyj->open_count)
+ do_ipw_close(ttyj);
+ ipwireless_disassociate_network_ttys(network,
+ ttyj->channel_idx);
+ tty_unregister_device(ipw_tty_driver, j);
+ ttys[j] = NULL;
+ mutex_unlock(&ttyj->ipw_tty_mutex);
+ kfree(ttyj);
+ }
+ }
+}
+
+static struct tty_operations tty_ops = {
+ .open = ipw_open,
+ .close = ipw_close,
+ .hangup = ipw_hangup,
+ .write = ipw_write,
+ .write_room = ipw_write_room,
+ .ioctl = ipw_ioctl,
+ .chars_in_buffer = ipw_chars_in_buffer,
+ .tiocmget = ipw_tiocmget,
+ .tiocmset = ipw_tiocmset,
+};
+
+int ipwireless_tty_init(void)
+{
+ int result;
+
+ ipw_tty_driver = alloc_tty_driver(IPWIRELESS_PCMCIA_MINORS);
+ if (!ipw_tty_driver)
+ return -ENOMEM;
+
+ ipw_tty_driver->owner = THIS_MODULE;
+ ipw_tty_driver->driver_name = IPWIRELESS_PCCARD_NAME;
+ ipw_tty_driver->name = "ttyIPWp";
+ ipw_tty_driver->major = 0;
+ ipw_tty_driver->minor_start = IPWIRELESS_PCMCIA_START;
+ ipw_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ ipw_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+ ipw_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ ipw_tty_driver->init_termios = tty_std_termios;
+ ipw_tty_driver->init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ ipw_tty_driver->init_termios.c_ispeed = 9600;
+ ipw_tty_driver->init_termios.c_ospeed = 9600;
+ tty_set_operations(ipw_tty_driver, &tty_ops);
+ result = tty_register_driver(ipw_tty_driver);
+ if (result) {
+ printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+ ": failed to register tty driver\n");
+ put_tty_driver(ipw_tty_driver);
+ return result;
+ }
+
+ return 0;
+}
+
+void ipwireless_tty_release(void)
+{
+ int ret;
+
+ ret = tty_unregister_driver(ipw_tty_driver);
+ put_tty_driver(ipw_tty_driver);
+ if (ret != 0)
+ printk(KERN_ERR IPWIRELESS_PCCARD_NAME
+ ": tty_unregister_driver failed with code %d\n", ret);
+}
+
+int ipwireless_tty_is_modem(struct ipw_tty *tty)
+{
+ return tty->tty_type == TTYTYPE_MODEM;
+}
+
+void
+ipwireless_tty_notify_control_line_change(struct ipw_tty *tty,
+ unsigned int channel_idx,
+ unsigned int control_lines,
+ unsigned int changed_mask)
+{
+ unsigned int old_control_lines = tty->control_lines;
+
+ tty->control_lines = (tty->control_lines & ~changed_mask)
+ | (control_lines & changed_mask);
+
+ /*
+ * If DCD is de-asserted, we close the tty so pppd can tell that we
+ * have gone offline.
+ */
+ if ((old_control_lines & IPW_CONTROL_LINE_DCD)
+ && !(tty->control_lines & IPW_CONTROL_LINE_DCD)
+ && tty->linux_tty) {
+ tty_hangup(tty->linux_tty);
+ }
+}
+
diff --git a/trunk/drivers/char/pcmcia/ipwireless/tty.h b/trunk/drivers/char/pcmcia/ipwireless/tty.h
new file mode 100644
index 000000000000..b0deb9168b6b
--- /dev/null
+++ b/trunk/drivers/char/pcmcia/ipwireless/tty.h
@@ -0,0 +1,48 @@
+/*
+ * IPWireless 3G PCMCIA Network Driver
+ *
+ * Original code
+ * by Stephen Blackheath ,
+ * Ben Martel
+ *
+ * Copyrighted as follows:
+ * Copyright (C) 2004 by Symmetric Systems Ltd (NZ)
+ *
+ * Various driver changes and rewrites, port to new kernels
+ * Copyright (C) 2006-2007 Jiri Kosina
+ *
+ * Misc code cleanups and updates
+ * Copyright (C) 2007 David Sterba
+ */
+
+#ifndef _IPWIRELESS_CS_TTY_H_
+#define _IPWIRELESS_CS_TTY_H_
+
+#include
+#include
+
+#include
+#include
+#include
+#include
+
+struct ipw_tty;
+struct ipw_network;
+struct ipw_hardware;
+
+int ipwireless_tty_init(void);
+void ipwireless_tty_release(void);
+
+struct ipw_tty *ipwireless_tty_create(struct ipw_hardware *hw,
+ struct ipw_network *net,
+ dev_node_t *nodes);
+void ipwireless_tty_free(struct ipw_tty *tty);
+void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data,
+ unsigned int length);
+int ipwireless_tty_is_modem(struct ipw_tty *tty);
+void ipwireless_tty_notify_control_line_change(struct ipw_tty *tty,
+ unsigned int channel_idx,
+ unsigned int control_lines,
+ unsigned int changed_mask);
+
+#endif
diff --git a/trunk/drivers/misc/Kconfig b/trunk/drivers/misc/Kconfig
index 78cd33861766..7b5220ca7d7f 100644
--- a/trunk/drivers/misc/Kconfig
+++ b/trunk/drivers/misc/Kconfig
@@ -285,4 +285,13 @@ config INTEL_MENLOW
If unsure, say N.
+config ENCLOSURE_SERVICES
+ tristate "Enclosure Services"
+ default n
+ help
+ Provides support for intelligent enclosures (bays which
+ contain storage devices). You also need either a host
+ driver (SCSI/ATA) which supports enclosures
+ or a SCSI enclosure device (SES) to use these services.
+
endif # MISC_DEVICES
diff --git a/trunk/drivers/misc/Makefile b/trunk/drivers/misc/Makefile
index 1f41654aae4d..7f13549cc87e 100644
--- a/trunk/drivers/misc/Makefile
+++ b/trunk/drivers/misc/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
obj-$(CONFIG_FUJITSU_LAPTOP) += fujitsu-laptop.o
obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
+obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
diff --git a/trunk/drivers/misc/enclosure.c b/trunk/drivers/misc/enclosure.c
new file mode 100644
index 000000000000..6fcb0e96adf4
--- /dev/null
+++ b/trunk/drivers/misc/enclosure.c
@@ -0,0 +1,484 @@
+/*
+ * Enclosure Services
+ *
+ * Copyright (C) 2008 James Bottomley
+ *
+**-----------------------------------------------------------------------------
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License
+** version 2 as published by the Free Software Foundation.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**-----------------------------------------------------------------------------
+*/
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+static LIST_HEAD(container_list);
+static DEFINE_MUTEX(container_list_lock);
+static struct class enclosure_class;
+static struct class enclosure_component_class;
+
+/**
+ * enclosure_find - find an enclosure given a device
+ * @dev: the device to find for
+ *
+ * Looks through the list of registered enclosures to see
+ * if it can find a match for a device. Returns NULL if no
+ * enclosure is found. Obtains a reference to the enclosure class
+ * device which must be released with class_device_put().
+ */
+struct enclosure_device *enclosure_find(struct device *dev)
+{
+ struct enclosure_device *edev = NULL;
+
+ mutex_lock(&container_list_lock);
+ list_for_each_entry(edev, &container_list, node) {
+ if (edev->cdev.dev == dev) {
+ class_device_get(&edev->cdev);
+ mutex_unlock(&container_list_lock);
+ return edev;
+ }
+ }
+ mutex_unlock(&container_list_lock);
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(enclosure_find);
+
+/**
+ * enclosure_for_each_device - calls a function for each enclosure
+ * @fn: the function to call
+ * @data: the data to pass to each call
+ *
+ * Loops over all the enclosures calling the function.
+ *
+ * Note, this function uses a mutex which will be held across calls to
+ * @fn, so it must have non atomic context, and @fn may (although it
+ * should not) sleep or otherwise cause the mutex to be held for
+ * indefinite periods
+ */
+int enclosure_for_each_device(int (*fn)(struct enclosure_device *, void *),
+ void *data)
+{
+ int error = 0;
+ struct enclosure_device *edev;
+
+ mutex_lock(&container_list_lock);
+ list_for_each_entry(edev, &container_list, node) {
+ error = fn(edev, data);
+ if (error)
+ break;
+ }
+ mutex_unlock(&container_list_lock);
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(enclosure_for_each_device);
+
+/**
+ * enclosure_register - register device as an enclosure
+ *
+ * @dev: device containing the enclosure
+ * @components: number of components in the enclosure
+ *
+ * This sets up the device for being an enclosure. Note that @dev does
+ * not have to be a dedicated enclosure device. It may be some other type
+ * of device that additionally responds to enclosure services
+ */
+struct enclosure_device *
+enclosure_register(struct device *dev, const char *name, int components,
+ struct enclosure_component_callbacks *cb)
+{
+ struct enclosure_device *edev =
+ kzalloc(sizeof(struct enclosure_device) +
+ sizeof(struct enclosure_component)*components,
+ GFP_KERNEL);
+ int err, i;
+
+ BUG_ON(!cb);
+
+ if (!edev)
+ return ERR_PTR(-ENOMEM);
+
+ edev->components = components;
+
+ edev->cdev.class = &enclosure_class;
+ edev->cdev.dev = get_device(dev);
+ edev->cb = cb;
+ snprintf(edev->cdev.class_id, BUS_ID_SIZE, "%s", name);
+ err = class_device_register(&edev->cdev);
+ if (err)
+ goto err;
+
+ for (i = 0; i < components; i++)
+ edev->component[i].number = -1;
+
+ mutex_lock(&container_list_lock);
+ list_add_tail(&edev->node, &container_list);
+ mutex_unlock(&container_list_lock);
+
+ return edev;
+
+ err:
+ put_device(edev->cdev.dev);
+ kfree(edev);
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(enclosure_register);
+
+static struct enclosure_component_callbacks enclosure_null_callbacks;
+
+/**
+ * enclosure_unregister - remove an enclosure
+ *
+ * @edev: the registered enclosure to remove;
+ */
+void enclosure_unregister(struct enclosure_device *edev)
+{
+ int i;
+
+ mutex_lock(&container_list_lock);
+ list_del(&edev->node);
+ mutex_unlock(&container_list_lock);
+
+ for (i = 0; i < edev->components; i++)
+ if (edev->component[i].number != -1)
+ class_device_unregister(&edev->component[i].cdev);
+
+ /* prevent any callbacks into service user */
+ edev->cb = &enclosure_null_callbacks;
+ class_device_unregister(&edev->cdev);
+}
+EXPORT_SYMBOL_GPL(enclosure_unregister);
+
+static void enclosure_release(struct class_device *cdev)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev);
+
+ put_device(cdev->dev);
+ kfree(edev);
+}
+
+static void enclosure_component_release(struct class_device *cdev)
+{
+ if (cdev->dev)
+ put_device(cdev->dev);
+ class_device_put(cdev->parent);
+}
+
+/**
+ * enclosure_component_register - add a particular component to an enclosure
+ * @edev: the enclosure to add the component
+ * @num: the device number
+ * @type: the type of component being added
+ * @name: an optional name to appear in sysfs (leave NULL if none)
+ *
+ * Registers the component. The name is optional for enclosures that
+ * give their components a unique name. If not, leave the field NULL
+ * and a name will be assigned.
+ *
+ * Returns a pointer to the enclosure component or an error.
+ */
+struct enclosure_component *
+enclosure_component_register(struct enclosure_device *edev,
+ unsigned int number,
+ enum enclosure_component_type type,
+ const char *name)
+{
+ struct enclosure_component *ecomp;
+ struct class_device *cdev;
+ int err;
+
+ if (number >= edev->components)
+ return ERR_PTR(-EINVAL);
+
+ ecomp = &edev->component[number];
+
+ if (ecomp->number != -1)
+ return ERR_PTR(-EINVAL);
+
+ ecomp->type = type;
+ ecomp->number = number;
+ cdev = &ecomp->cdev;
+ cdev->parent = class_device_get(&edev->cdev);
+ cdev->class = &enclosure_component_class;
+ if (name)
+ snprintf(cdev->class_id, BUS_ID_SIZE, "%s", name);
+ else
+ snprintf(cdev->class_id, BUS_ID_SIZE, "%u", number);
+
+ err = class_device_register(cdev);
+ if (err)
+ ERR_PTR(err);
+
+ return ecomp;
+}
+EXPORT_SYMBOL_GPL(enclosure_component_register);
+
+/**
+ * enclosure_add_device - add a device as being part of an enclosure
+ * @edev: the enclosure device being added to.
+ * @num: the number of the component
+ * @dev: the device being added
+ *
+ * Declares a real device to reside in slot (or identifier) @num of an
+ * enclosure. This will cause the relevant sysfs links to appear.
+ * This function may also be used to change a device associated with
+ * an enclosure without having to call enclosure_remove_device() in
+ * between.
+ *
+ * Returns zero on success or an error.
+ */
+int enclosure_add_device(struct enclosure_device *edev, int component,
+ struct device *dev)
+{
+ struct class_device *cdev;
+
+ if (!edev || component >= edev->components)
+ return -EINVAL;
+
+ cdev = &edev->component[component].cdev;
+
+ class_device_del(cdev);
+ if (cdev->dev)
+ put_device(cdev->dev);
+ cdev->dev = get_device(dev);
+ return class_device_add(cdev);
+}
+EXPORT_SYMBOL_GPL(enclosure_add_device);
+
+/**
+ * enclosure_remove_device - remove a device from an enclosure
+ * @edev: the enclosure device
+ * @num: the number of the component to remove
+ *
+ * Returns zero on success or an error.
+ *
+ */
+int enclosure_remove_device(struct enclosure_device *edev, int component)
+{
+ struct class_device *cdev;
+
+ if (!edev || component >= edev->components)
+ return -EINVAL;
+
+ cdev = &edev->component[component].cdev;
+
+ class_device_del(cdev);
+ if (cdev->dev)
+ put_device(cdev->dev);
+ cdev->dev = NULL;
+ return class_device_add(cdev);
+}
+EXPORT_SYMBOL_GPL(enclosure_remove_device);
+
+/*
+ * sysfs pieces below
+ */
+
+static ssize_t enclosure_show_components(struct class_device *cdev, char *buf)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev);
+
+ return snprintf(buf, 40, "%d\n", edev->components);
+}
+
+static struct class_device_attribute enclosure_attrs[] = {
+ __ATTR(components, S_IRUGO, enclosure_show_components, NULL),
+ __ATTR_NULL
+};
+
+static struct class enclosure_class = {
+ .name = "enclosure",
+ .owner = THIS_MODULE,
+ .release = enclosure_release,
+ .class_dev_attrs = enclosure_attrs,
+};
+
+static const char *const enclosure_status [] = {
+ [ENCLOSURE_STATUS_UNSUPPORTED] = "unsupported",
+ [ENCLOSURE_STATUS_OK] = "OK",
+ [ENCLOSURE_STATUS_CRITICAL] = "critical",
+ [ENCLOSURE_STATUS_NON_CRITICAL] = "non-critical",
+ [ENCLOSURE_STATUS_UNRECOVERABLE] = "unrecoverable",
+ [ENCLOSURE_STATUS_NOT_INSTALLED] = "not installed",
+ [ENCLOSURE_STATUS_UNKNOWN] = "unknown",
+ [ENCLOSURE_STATUS_UNAVAILABLE] = "unavailable",
+};
+
+static const char *const enclosure_type [] = {
+ [ENCLOSURE_COMPONENT_DEVICE] = "device",
+ [ENCLOSURE_COMPONENT_ARRAY_DEVICE] = "array device",
+};
+
+static ssize_t get_component_fault(struct class_device *cdev, char *buf)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+ struct enclosure_component *ecomp = to_enclosure_component(cdev);
+
+ if (edev->cb->get_fault)
+ edev->cb->get_fault(edev, ecomp);
+ return snprintf(buf, 40, "%d\n", ecomp->fault);
+}
+
+static ssize_t set_component_fault(struct class_device *cdev, const char *buf,
+ size_t count)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+ struct enclosure_component *ecomp = to_enclosure_component(cdev);
+ int val = simple_strtoul(buf, NULL, 0);
+
+ if (edev->cb->set_fault)
+ edev->cb->set_fault(edev, ecomp, val);
+ return count;
+}
+
+static ssize_t get_component_status(struct class_device *cdev, char *buf)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+ struct enclosure_component *ecomp = to_enclosure_component(cdev);
+
+ if (edev->cb->get_status)
+ edev->cb->get_status(edev, ecomp);
+ return snprintf(buf, 40, "%s\n", enclosure_status[ecomp->status]);
+}
+
+static ssize_t set_component_status(struct class_device *cdev, const char *buf,
+ size_t count)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+ struct enclosure_component *ecomp = to_enclosure_component(cdev);
+ int i;
+
+ for (i = 0; enclosure_status[i]; i++) {
+ if (strncmp(buf, enclosure_status[i],
+ strlen(enclosure_status[i])) == 0 &&
+ (buf[strlen(enclosure_status[i])] == '\n' ||
+ buf[strlen(enclosure_status[i])] == '\0'))
+ break;
+ }
+
+ if (enclosure_status[i] && edev->cb->set_status) {
+ edev->cb->set_status(edev, ecomp, i);
+ return count;
+ } else
+ return -EINVAL;
+}
+
+static ssize_t get_component_active(struct class_device *cdev, char *buf)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+ struct enclosure_component *ecomp = to_enclosure_component(cdev);
+
+ if (edev->cb->get_active)
+ edev->cb->get_active(edev, ecomp);
+ return snprintf(buf, 40, "%d\n", ecomp->active);
+}
+
+static ssize_t set_component_active(struct class_device *cdev, const char *buf,
+ size_t count)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+ struct enclosure_component *ecomp = to_enclosure_component(cdev);
+ int val = simple_strtoul(buf, NULL, 0);
+
+ if (edev->cb->set_active)
+ edev->cb->set_active(edev, ecomp, val);
+ return count;
+}
+
+static ssize_t get_component_locate(struct class_device *cdev, char *buf)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+ struct enclosure_component *ecomp = to_enclosure_component(cdev);
+
+ if (edev->cb->get_locate)
+ edev->cb->get_locate(edev, ecomp);
+ return snprintf(buf, 40, "%d\n", ecomp->locate);
+}
+
+static ssize_t set_component_locate(struct class_device *cdev, const char *buf,
+ size_t count)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+ struct enclosure_component *ecomp = to_enclosure_component(cdev);
+ int val = simple_strtoul(buf, NULL, 0);
+
+ if (edev->cb->set_locate)
+ edev->cb->set_locate(edev, ecomp, val);
+ return count;
+}
+
+static ssize_t get_component_type(struct class_device *cdev, char *buf)
+{
+ struct enclosure_component *ecomp = to_enclosure_component(cdev);
+
+ return snprintf(buf, 40, "%s\n", enclosure_type[ecomp->type]);
+}
+
+
+static struct class_device_attribute enclosure_component_attrs[] = {
+ __ATTR(fault, S_IRUGO | S_IWUSR, get_component_fault,
+ set_component_fault),
+ __ATTR(status, S_IRUGO | S_IWUSR, get_component_status,
+ set_component_status),
+ __ATTR(active, S_IRUGO | S_IWUSR, get_component_active,
+ set_component_active),
+ __ATTR(locate, S_IRUGO | S_IWUSR, get_component_locate,
+ set_component_locate),
+ __ATTR(type, S_IRUGO, get_component_type, NULL),
+ __ATTR_NULL
+};
+
+static struct class enclosure_component_class = {
+ .name = "enclosure_component",
+ .owner = THIS_MODULE,
+ .class_dev_attrs = enclosure_component_attrs,
+ .release = enclosure_component_release,
+};
+
+static int __init enclosure_init(void)
+{
+ int err;
+
+ err = class_register(&enclosure_class);
+ if (err)
+ return err;
+ err = class_register(&enclosure_component_class);
+ if (err)
+ goto err_out;
+
+ return 0;
+ err_out:
+ class_unregister(&enclosure_class);
+
+ return err;
+}
+
+static void __exit enclosure_exit(void)
+{
+ class_unregister(&enclosure_component_class);
+ class_unregister(&enclosure_class);
+}
+
+module_init(enclosure_init);
+module_exit(enclosure_exit);
+
+MODULE_AUTHOR("James Bottomley");
+MODULE_DESCRIPTION("Enclosure Services");
+MODULE_LICENSE("GPL v2");
diff --git a/trunk/drivers/scsi/Kconfig b/trunk/drivers/scsi/Kconfig
index 14fc7f39e83e..a5f0aaaf0dd4 100644
--- a/trunk/drivers/scsi/Kconfig
+++ b/trunk/drivers/scsi/Kconfig
@@ -179,7 +179,15 @@ config CHR_DEV_SCH
say M here and read and
. The module will be called ch.o.
If unsure, say N.
-
+
+config SCSI_ENCLOSURE
+ tristate "SCSI Enclosure Support"
+ depends on SCSI && ENCLOSURE_SERVICES
+ help
+ Enclosures are devices sitting on or in SCSI backplanes that
+ manage devices. If you have a disk cage, the chances are that
+ it has an enclosure device. Selecting this option will just allow
+ certain enclosure conditions to be reported and is not required.
comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
depends on SCSI
@@ -350,17 +358,6 @@ config SGIWD93_SCSI
If you have a Western Digital WD93 SCSI controller on
an SGI MIPS system, say Y. Otherwise, say N.
-config SCSI_DECNCR
- tristate "DEC NCR53C94 Scsi Driver"
- depends on MACH_DECSTATION && SCSI && TC
- help
- Say Y here to support the NCR53C94 SCSI controller chips on IOASIC
- based TURBOchannel DECstations and TURBOchannel PMAZ-A cards.
-
-config SCSI_DECSII
- tristate "DEC SII Scsi Driver"
- depends on MACH_DECSTATION && SCSI && 32BIT
-
config BLK_DEV_3W_XXXX_RAID
tristate "3ware 5/6/7/8xxx ATA-RAID support"
depends on PCI && SCSI
@@ -1263,17 +1260,6 @@ config SCSI_NCR53C8XX_NO_DISCONNECT
not allow targets to disconnect is not reasonable if there is more
than 1 device on a SCSI bus. The normal answer therefore is N.
-config SCSI_MCA_53C9X
- tristate "NCR MCA 53C9x SCSI support"
- depends on MCA_LEGACY && SCSI && BROKEN_ON_SMP
- help
- Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
- controller based on the NCR 53C94. This driver will allow use of
- the controller on the 3550, and very possibly others.
-
- To compile this driver as a module, choose M here: the
- module will be called mca_53c9x.
-
config SCSI_PAS16
tristate "PAS16 SCSI support"
depends on ISA && SCSI
@@ -1600,45 +1586,6 @@ config GVP11_SCSI
To compile this driver as a module, choose M here: the
module will be called gvp11.
-config CYBERSTORM_SCSI
- tristate "CyberStorm SCSI support"
- depends on ZORRO && SCSI
- help
- If you have an Amiga with an original (MkI) Phase5 Cyberstorm
- accelerator board and the optional Cyberstorm SCSI controller,
- answer Y. Otherwise, say N.
-
-config CYBERSTORMII_SCSI
- tristate "CyberStorm Mk II SCSI support"
- depends on ZORRO && SCSI
- help
- If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
- and the optional Cyberstorm SCSI controller, say Y. Otherwise,
- answer N.
-
-config BLZ2060_SCSI
- tristate "Blizzard 2060 SCSI support"
- depends on ZORRO && SCSI
- help
- If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
- and want to use the onboard SCSI controller, say Y. Otherwise,
- answer N.
-
-config BLZ1230_SCSI
- tristate "Blizzard 1230IV/1260 SCSI support"
- depends on ZORRO && SCSI
- help
- If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
- 1260 accelerator, and the optional SCSI module, say Y. Otherwise,
- say N.
-
-config FASTLANE_SCSI
- tristate "Fastlane SCSI support"
- depends on ZORRO && SCSI
- help
- If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
- one in the near future, say Y to this question. Otherwise, say N.
-
config SCSI_A4000T
tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)"
depends on AMIGA && SCSI && EXPERIMENTAL
@@ -1666,15 +1613,6 @@ config SCSI_ZORRO7XX
accelerator card for the Amiga 1200,
- the SCSI controller on the GVP Turbo 040/060 accelerator.
-config OKTAGON_SCSI
- tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
- depends on ZORRO && SCSI && EXPERIMENTAL
- help
- If you have the BSC Oktagon SCSI disk controller for the Amiga, say
- Y to this question. If you're in doubt about whether you have one,
- see the picture at
- .
-
config ATARI_SCSI
tristate "Atari native SCSI support"
depends on ATARI && SCSI
@@ -1727,18 +1665,6 @@ config MAC_SCSI
SCSI-HOWTO, available from
.
-config SCSI_MAC_ESP
- tristate "Macintosh NCR53c9[46] SCSI"
- depends on MAC && SCSI
- help
- This is the NCR 53c9x SCSI controller found on most of the 68040
- based Macintoshes. If you have one of these say Y and read the
- SCSI-HOWTO, available from
- .
-
- To compile this driver as a module, choose M here: the
- module will be called mac_esp.
-
config MVME147_SCSI
bool "WD33C93 SCSI driver for MVME147"
depends on MVME147 && SCSI=y
@@ -1779,6 +1705,7 @@ config SUN3_SCSI
config SUN3X_ESP
bool "Sun3x ESP SCSI"
depends on SUN3X && SCSI=y
+ select SCSI_SPI_ATTRS
help
The ESP was an on-board SCSI controller used on Sun 3/80
machines. Say Y here to compile in support for it.
diff --git a/trunk/drivers/scsi/Makefile b/trunk/drivers/scsi/Makefile
index 93e1428d03fc..925c26b4fff9 100644
--- a/trunk/drivers/scsi/Makefile
+++ b/trunk/drivers/scsi/Makefile
@@ -44,15 +44,8 @@ obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
-obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o
-obj-$(CONFIG_CYBERSTORMII_SCSI) += NCR53C9x.o cyberstormII.o
-obj-$(CONFIG_BLZ2060_SCSI) += NCR53C9x.o blz2060.o
-obj-$(CONFIG_BLZ1230_SCSI) += NCR53C9x.o blz1230.o
-obj-$(CONFIG_FASTLANE_SCSI) += NCR53C9x.o fastlane.o
-obj-$(CONFIG_OKTAGON_SCSI) += NCR53C9x.o oktagon_esp_mod.o
obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o
obj-$(CONFIG_MAC_SCSI) += mac_scsi.o
-obj-$(CONFIG_SCSI_MAC_ESP) += mac_esp.o NCR53C9x.o
obj-$(CONFIG_SUN3_SCSI) += sun3_scsi.o sun3_scsi_vme.o
obj-$(CONFIG_MVME16x_SCSI) += 53c700.o mvme16x_scsi.o
obj-$(CONFIG_BVME6000_SCSI) += 53c700.o bvme6000_scsi.o
@@ -95,7 +88,6 @@ obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/
obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o
obj-$(CONFIG_SCSI_EATA_PIO) += eata_pio.o
obj-$(CONFIG_SCSI_7000FASST) += wd7000.o
-obj-$(CONFIG_SCSI_MCA_53C9X) += NCR53C9x.o mca_53c9x.o
obj-$(CONFIG_SCSI_IBMMCA) += ibmmca.o
obj-$(CONFIG_SCSI_EATA) += eata.o
obj-$(CONFIG_SCSI_DC395x) += dc395x.o
@@ -112,13 +104,12 @@ obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o
obj-$(CONFIG_BLK_DEV_IDESCSI) += ide-scsi.o
obj-$(CONFIG_SCSI_MESH) += mesh.o
obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o
-obj-$(CONFIG_SCSI_DECNCR) += NCR53C9x.o dec_esp.o
obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o
obj-$(CONFIG_SCSI_PPA) += ppa.o
obj-$(CONFIG_SCSI_IMM) += imm.o
obj-$(CONFIG_JAZZ_ESP) += esp_scsi.o jazz_esp.o
-obj-$(CONFIG_SUN3X_ESP) += NCR53C9x.o sun3x_esp.o
+obj-$(CONFIG_SUN3X_ESP) += esp_scsi.o sun3x_esp.o
obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o
obj-$(CONFIG_SCSI_SNI_53C710) += 53c700.o sni_53c710.o
obj-$(CONFIG_SCSI_NSP32) += nsp32.o
@@ -138,6 +129,7 @@ obj-$(CONFIG_BLK_DEV_SD) += sd_mod.o
obj-$(CONFIG_BLK_DEV_SR) += sr_mod.o
obj-$(CONFIG_CHR_DEV_SG) += sg.o
obj-$(CONFIG_CHR_DEV_SCH) += ch.o
+obj-$(CONFIG_SCSI_ENCLOSURE) += ses.o
# This goes last, so that "real" scsi devices probe earlier
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
diff --git a/trunk/drivers/scsi/NCR53C9x.c b/trunk/drivers/scsi/NCR53C9x.c
deleted file mode 100644
index 5b0efc903918..000000000000
--- a/trunk/drivers/scsi/NCR53C9x.c
+++ /dev/null
@@ -1,3654 +0,0 @@
-/* NCR53C9x.c: Generic SCSI driver code for NCR53C9x chips.
- *
- * Originally esp.c : EnhancedScsiProcessor Sun SCSI driver code.
- *
- * Copyright (C) 1995, 1998 David S. Miller (davem@caip.rutgers.edu)
- *
- * Most DMA dependencies put in driver specific files by
- * Jesper Skov (jskov@cygnus.co.uk)
- *
- * Set up to use esp_read/esp_write (preprocessor macros in NCR53c9x.h) by
- * Tymm Twillman (tymm@coe.missouri.edu)
- */
-
-/* TODO:
- *
- * 1) Maybe disable parity checking in config register one for SCSI1
- * targets. (Gilmore says parity error on the SBus can lock up
- * old sun4c's)
- * 2) Add support for DMA2 pipelining.
- * 3) Add tagged queueing.
- * 4) Maybe change use of "esp" to something more "NCR"'ish.
- */
-
-#include
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include "scsi.h"
-#include
-#include "NCR53C9x.h"
-
-#include
-#include
-#include
-#include
-#include
-
-/* Command phase enumeration. */
-enum {
- not_issued = 0x00, /* Still in the issue_SC queue. */
-
- /* Various forms of selecting a target. */
-#define in_slct_mask 0x10
- in_slct_norm = 0x10, /* ESP is arbitrating, normal selection */
- in_slct_stop = 0x11, /* ESP will select, then stop with IRQ */
- in_slct_msg = 0x12, /* select, then send a message */
- in_slct_tag = 0x13, /* select and send tagged queue msg */
- in_slct_sneg = 0x14, /* select and acquire sync capabilities */
-
- /* Any post selection activity. */
-#define in_phases_mask 0x20
- in_datain = 0x20, /* Data is transferring from the bus */
- in_dataout = 0x21, /* Data is transferring to the bus */
- in_data_done = 0x22, /* Last DMA data operation done (maybe) */
- in_msgin = 0x23, /* Eating message from target */
- in_msgincont = 0x24, /* Eating more msg bytes from target */
- in_msgindone = 0x25, /* Decide what to do with what we got */
- in_msgout = 0x26, /* Sending message to target */
- in_msgoutdone = 0x27, /* Done sending msg out */
- in_cmdbegin = 0x28, /* Sending cmd after abnormal selection */
- in_cmdend = 0x29, /* Done sending slow cmd */
- in_status = 0x2a, /* Was in status phase, finishing cmd */
- in_freeing = 0x2b, /* freeing the bus for cmd cmplt or disc */
- in_the_dark = 0x2c, /* Don't know what bus phase we are in */
-
- /* Special states, ie. not normal bus transitions... */
-#define in_spec_mask 0x80
- in_abortone = 0x80, /* Aborting one command currently */
- in_abortall = 0x81, /* Blowing away all commands we have */
- in_resetdev = 0x82, /* SCSI target reset in progress */
- in_resetbus = 0x83, /* SCSI bus reset in progress */
- in_tgterror = 0x84, /* Target did something stupid */
-};
-
-enum {
- /* Zero has special meaning, see skipahead[12]. */
-/*0*/ do_never,
-
-/*1*/ do_phase_determine,
-/*2*/ do_reset_bus,
-/*3*/ do_reset_complete,
-/*4*/ do_work_bus,
-/*5*/ do_intr_end
-};
-
-/* The master ring of all esp hosts we are managing in this driver. */
-static struct NCR_ESP *espchain;
-int nesps = 0, esps_in_use = 0, esps_running = 0;
-EXPORT_SYMBOL(nesps);
-EXPORT_SYMBOL(esps_running);
-
-irqreturn_t esp_intr(int irq, void *dev_id);
-
-/* Debugging routines */
-static struct esp_cmdstrings {
- unchar cmdchar;
- char *text;
-} esp_cmd_strings[] = {
- /* Miscellaneous */
- { ESP_CMD_NULL, "ESP_NOP", },
- { ESP_CMD_FLUSH, "FIFO_FLUSH", },
- { ESP_CMD_RC, "RSTESP", },
- { ESP_CMD_RS, "RSTSCSI", },
- /* Disconnected State Group */
- { ESP_CMD_RSEL, "RESLCTSEQ", },
- { ESP_CMD_SEL, "SLCTNATN", },
- { ESP_CMD_SELA, "SLCTATN", },
- { ESP_CMD_SELAS, "SLCTATNSTOP", },
- { ESP_CMD_ESEL, "ENSLCTRESEL", },
- { ESP_CMD_DSEL, "DISSELRESEL", },
- { ESP_CMD_SA3, "SLCTATN3", },
- { ESP_CMD_RSEL3, "RESLCTSEQ", },
- /* Target State Group */
- { ESP_CMD_SMSG, "SNDMSG", },
- { ESP_CMD_SSTAT, "SNDSTATUS", },
- { ESP_CMD_SDATA, "SNDDATA", },
- { ESP_CMD_DSEQ, "DISCSEQ", },
- { ESP_CMD_TSEQ, "TERMSEQ", },
- { ESP_CMD_TCCSEQ, "TRGTCMDCOMPSEQ", },
- { ESP_CMD_DCNCT, "DISC", },
- { ESP_CMD_RMSG, "RCVMSG", },
- { ESP_CMD_RCMD, "RCVCMD", },
- { ESP_CMD_RDATA, "RCVDATA", },
- { ESP_CMD_RCSEQ, "RCVCMDSEQ", },
- /* Initiator State Group */
- { ESP_CMD_TI, "TRANSINFO", },
- { ESP_CMD_ICCSEQ, "INICMDSEQCOMP", },
- { ESP_CMD_MOK, "MSGACCEPTED", },
- { ESP_CMD_TPAD, "TPAD", },
- { ESP_CMD_SATN, "SATN", },
- { ESP_CMD_RATN, "RATN", },
-};
-#define NUM_ESP_COMMANDS ((sizeof(esp_cmd_strings)) / (sizeof(struct esp_cmdstrings)))
-
-/* Print textual representation of an ESP command */
-static inline void esp_print_cmd(unchar espcmd)
-{
- unchar dma_bit = espcmd & ESP_CMD_DMA;
- int i;
-
- espcmd &= ~dma_bit;
- for(i=0; i");
-}
-
-/* Print the interrupt register's value */
-static inline void esp_print_ireg(unchar intreg)
-{
- printk("INTREG< ");
- if(intreg & ESP_INTR_S)
- printk("SLCT_NATN ");
- if(intreg & ESP_INTR_SATN)
- printk("SLCT_ATN ");
- if(intreg & ESP_INTR_RSEL)
- printk("RSLCT ");
- if(intreg & ESP_INTR_FDONE)
- printk("FDONE ");
- if(intreg & ESP_INTR_BSERV)
- printk("BSERV ");
- if(intreg & ESP_INTR_DC)
- printk("DISCNCT ");
- if(intreg & ESP_INTR_IC)
- printk("ILL_CMD ");
- if(intreg & ESP_INTR_SR)
- printk("SCSI_BUS_RESET ");
- printk(">");
-}
-
-/* Print the sequence step registers contents */
-static inline void esp_print_seqreg(unchar stepreg)
-{
- stepreg &= ESP_STEP_VBITS;
- printk("STEP<%s>",
- (stepreg == ESP_STEP_ASEL ? "SLCT_ARB_CMPLT" :
- (stepreg == ESP_STEP_SID ? "1BYTE_MSG_SENT" :
- (stepreg == ESP_STEP_NCMD ? "NOT_IN_CMD_PHASE" :
- (stepreg == ESP_STEP_PPC ? "CMD_BYTES_LOST" :
- (stepreg == ESP_STEP_FINI4 ? "CMD_SENT_OK" :
- "UNKNOWN"))))));
-}
-
-static char *phase_string(int phase)
-{
- switch(phase) {
- case not_issued:
- return "UNISSUED";
- case in_slct_norm:
- return "SLCTNORM";
- case in_slct_stop:
- return "SLCTSTOP";
- case in_slct_msg:
- return "SLCTMSG";
- case in_slct_tag:
- return "SLCTTAG";
- case in_slct_sneg:
- return "SLCTSNEG";
- case in_datain:
- return "DATAIN";
- case in_dataout:
- return "DATAOUT";
- case in_data_done:
- return "DATADONE";
- case in_msgin:
- return "MSGIN";
- case in_msgincont:
- return "MSGINCONT";
- case in_msgindone:
- return "MSGINDONE";
- case in_msgout:
- return "MSGOUT";
- case in_msgoutdone:
- return "MSGOUTDONE";
- case in_cmdbegin:
- return "CMDBEGIN";
- case in_cmdend:
- return "CMDEND";
- case in_status:
- return "STATUS";
- case in_freeing:
- return "FREEING";
- case in_the_dark:
- return "CLUELESS";
- case in_abortone:
- return "ABORTONE";
- case in_abortall:
- return "ABORTALL";
- case in_resetdev:
- return "RESETDEV";
- case in_resetbus:
- return "RESETBUS";
- case in_tgterror:
- return "TGTERROR";
- default:
- return "UNKNOWN";
- };
-}
-
-#ifdef DEBUG_STATE_MACHINE
-static inline void esp_advance_phase(Scsi_Cmnd *s, int newphase)
-{
- ESPLOG(("<%s>", phase_string(newphase)));
- s->SCp.sent_command = s->SCp.phase;
- s->SCp.phase = newphase;
-}
-#else
-#define esp_advance_phase(__s, __newphase) \
- (__s)->SCp.sent_command = (__s)->SCp.phase; \
- (__s)->SCp.phase = (__newphase);
-#endif
-
-#ifdef DEBUG_ESP_CMDS
-static inline void esp_cmd(struct NCR_ESP *esp, struct ESP_regs *eregs,
- unchar cmd)
-{
- esp->espcmdlog[esp->espcmdent] = cmd;
- esp->espcmdent = (esp->espcmdent + 1) & 31;
- esp_write(eregs->esp_cmnd, cmd);
-}
-#else
-#define esp_cmd(__esp, __eregs, __cmd) esp_write((__eregs)->esp_cmnd, (__cmd))
-#endif
-
-/* How we use the various Linux SCSI data structures for operation.
- *
- * struct scsi_cmnd:
- *
- * We keep track of the syncronous capabilities of a target
- * in the device member, using sync_min_period and
- * sync_max_offset. These are the values we directly write
- * into the ESP registers while running a command. If offset
- * is zero the ESP will use asynchronous transfers.
- * If the borken flag is set we assume we shouldn't even bother
- * trying to negotiate for synchronous transfer as this target
- * is really stupid. If we notice the target is dropping the
- * bus, and we have been allowing it to disconnect, we clear
- * the disconnect flag.
- */
-
-/* Manipulation of the ESP command queues. Thanks to the aha152x driver
- * and its author, Juergen E. Fischer, for the methods used here.
- * Note that these are per-ESP queues, not global queues like
- * the aha152x driver uses.
- */
-static inline void append_SC(Scsi_Cmnd **SC, Scsi_Cmnd *new_SC)
-{
- Scsi_Cmnd *end;
-
- new_SC->host_scribble = (unsigned char *) NULL;
- if(!*SC)
- *SC = new_SC;
- else {
- for(end=*SC;end->host_scribble;end=(Scsi_Cmnd *)end->host_scribble)
- ;
- end->host_scribble = (unsigned char *) new_SC;
- }
-}
-
-static inline void prepend_SC(Scsi_Cmnd **SC, Scsi_Cmnd *new_SC)
-{
- new_SC->host_scribble = (unsigned char *) *SC;
- *SC = new_SC;
-}
-
-static inline Scsi_Cmnd *remove_first_SC(Scsi_Cmnd **SC)
-{
- Scsi_Cmnd *ptr;
-
- ptr = *SC;
- if(ptr)
- *SC = (Scsi_Cmnd *) (*SC)->host_scribble;
- return ptr;
-}
-
-static inline Scsi_Cmnd *remove_SC(Scsi_Cmnd **SC, int target, int lun)
-{
- Scsi_Cmnd *ptr, *prev;
-
- for(ptr = *SC, prev = NULL;
- ptr && ((ptr->device->id != target) || (ptr->device->lun != lun));
- prev = ptr, ptr = (Scsi_Cmnd *) ptr->host_scribble)
- ;
- if(ptr) {
- if(prev)
- prev->host_scribble=ptr->host_scribble;
- else
- *SC=(Scsi_Cmnd *)ptr->host_scribble;
- }
- return ptr;
-}
-
-/* Resetting various pieces of the ESP scsi driver chipset */
-
-/* Reset the ESP chip, _not_ the SCSI bus. */
-static void esp_reset_esp(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- int family_code, version, i;
- volatile int trash;
-
- /* Now reset the ESP chip */
- esp_cmd(esp, eregs, ESP_CMD_RC);
- esp_cmd(esp, eregs, ESP_CMD_NULL | ESP_CMD_DMA);
- if(esp->erev == fast)
- esp_write(eregs->esp_cfg2, ESP_CONFIG2_FENAB);
- esp_cmd(esp, eregs, ESP_CMD_NULL | ESP_CMD_DMA);
-
- /* This is the only point at which it is reliable to read
- * the ID-code for a fast ESP chip variant.
- */
- esp->max_period = ((35 * esp->ccycle) / 1000);
- if(esp->erev == fast) {
- char *erev2string[] = {
- "Emulex FAS236",
- "Emulex FPESP100A",
- "fast",
- "QLogic FAS366",
- "Emulex FAS216",
- "Symbios Logic 53CF9x-2",
- "unknown!"
- };
-
- version = esp_read(eregs->esp_uid);
- family_code = (version & 0xf8) >> 3;
- if(family_code == 0x02) {
- if ((version & 7) == 2)
- esp->erev = fas216;
- else
- esp->erev = fas236;
- } else if(family_code == 0x0a)
- esp->erev = fas366; /* Version is usually '5'. */
- else if(family_code == 0x00) {
- if ((version & 7) == 2)
- esp->erev = fas100a; /* NCR53C9X */
- else
- esp->erev = espunknown;
- } else if(family_code == 0x14) {
- if ((version & 7) == 2)
- esp->erev = fsc;
- else
- esp->erev = espunknown;
- } else if(family_code == 0x00) {
- if ((version & 7) == 2)
- esp->erev = fas100a; /* NCR53C9X */
- else
- esp->erev = espunknown;
- } else
- esp->erev = espunknown;
- ESPLOG(("esp%d: FAST chip is %s (family=%d, version=%d)\n",
- esp->esp_id, erev2string[esp->erev - fas236],
- family_code, (version & 7)));
-
- esp->min_period = ((4 * esp->ccycle) / 1000);
- } else {
- esp->min_period = ((5 * esp->ccycle) / 1000);
- }
-
- /* Reload the configuration registers */
- esp_write(eregs->esp_cfact, esp->cfact);
- esp->prev_stp = 0;
- esp_write(eregs->esp_stp, 0);
- esp->prev_soff = 0;
- esp_write(eregs->esp_soff, 0);
- esp_write(eregs->esp_timeo, esp->neg_defp);
- esp->max_period = (esp->max_period + 3)>>2;
- esp->min_period = (esp->min_period + 3)>>2;
-
- esp_write(eregs->esp_cfg1, esp->config1);
- switch(esp->erev) {
- case esp100:
- /* nothing to do */
- break;
- case esp100a:
- esp_write(eregs->esp_cfg2, esp->config2);
- break;
- case esp236:
- /* Slow 236 */
- esp_write(eregs->esp_cfg2, esp->config2);
- esp->prev_cfg3 = esp->config3[0];
- esp_write(eregs->esp_cfg3, esp->prev_cfg3);
- break;
- case fas366:
- panic("esp: FAS366 support not present, please notify "
- "jongk@cs.utwente.nl");
- break;
- case fas216:
- case fas236:
- case fsc:
- /* Fast ESP variants */
- esp_write(eregs->esp_cfg2, esp->config2);
- for(i=0; i<8; i++)
- esp->config3[i] |= ESP_CONFIG3_FCLK;
- esp->prev_cfg3 = esp->config3[0];
- esp_write(eregs->esp_cfg3, esp->prev_cfg3);
- if(esp->diff)
- esp->radelay = 0;
- else
- esp->radelay = 16;
- /* Different timeout constant for these chips */
- esp->neg_defp =
- FSC_NEG_DEFP(esp->cfreq,
- (esp->cfact == ESP_CCF_F0 ?
- ESP_CCF_F7 + 1 : esp->cfact));
- esp_write(eregs->esp_timeo, esp->neg_defp);
- /* Enable Active Negotiation if possible */
- if((esp->erev == fsc) && !esp->diff)
- esp_write(eregs->esp_cfg4, ESP_CONFIG4_EAN);
- break;
- case fas100a:
- /* Fast 100a */
- esp_write(eregs->esp_cfg2, esp->config2);
- for(i=0; i<8; i++)
- esp->config3[i] |= ESP_CONFIG3_FCLOCK;
- esp->prev_cfg3 = esp->config3[0];
- esp_write(eregs->esp_cfg3, esp->prev_cfg3);
- esp->radelay = 32;
- break;
- default:
- panic("esp: what could it be... I wonder...");
- break;
- };
-
- /* Eat any bitrot in the chip */
- trash = esp_read(eregs->esp_intrpt);
- udelay(100);
-}
-
-/* This places the ESP into a known state at boot time. */
-void esp_bootup_reset(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- volatile unchar trash;
-
- /* Reset the DMA */
- if(esp->dma_reset)
- esp->dma_reset(esp);
-
- /* Reset the ESP */
- esp_reset_esp(esp, eregs);
-
- /* Reset the SCSI bus, but tell ESP not to generate an irq */
- esp_write(eregs->esp_cfg1, (esp_read(eregs->esp_cfg1) | ESP_CONFIG1_SRRDISAB));
- esp_cmd(esp, eregs, ESP_CMD_RS);
- udelay(400);
- esp_write(eregs->esp_cfg1, esp->config1);
-
- /* Eat any bitrot in the chip and we are done... */
- trash = esp_read(eregs->esp_intrpt);
-}
-EXPORT_SYMBOL(esp_bootup_reset);
-
-/* Allocate structure and insert basic data such as SCSI chip frequency
- * data and a pointer to the device
- */
-struct NCR_ESP* esp_allocate(struct scsi_host_template *tpnt, void *esp_dev,
- int hotplug)
-{
- struct NCR_ESP *esp, *elink;
- struct Scsi_Host *esp_host;
-
- if (hotplug)
- esp_host = scsi_host_alloc(tpnt, sizeof(struct NCR_ESP));
- else
- esp_host = scsi_register(tpnt, sizeof(struct NCR_ESP));
- if(!esp_host)
- panic("Cannot register ESP SCSI host");
- esp = (struct NCR_ESP *) esp_host->hostdata;
- if(!esp)
- panic("No esp in hostdata");
- esp->ehost = esp_host;
- esp->edev = esp_dev;
- esp->esp_id = nesps++;
-
- /* Set bitshift value (only used on Amiga with multiple ESPs) */
- esp->shift = 2;
-
- /* Put into the chain of esp chips detected */
- if(espchain) {
- elink = espchain;
- while(elink->next) elink = elink->next;
- elink->next = esp;
- } else {
- espchain = esp;
- }
- esp->next = NULL;
-
- return esp;
-}
-
-void esp_deallocate(struct NCR_ESP *esp)
-{
- struct NCR_ESP *elink;
-
- if(espchain == esp) {
- espchain = NULL;
- } else {
- for(elink = espchain; elink && (elink->next != esp); elink = elink->next);
- if(elink)
- elink->next = esp->next;
- }
- nesps--;
-}
-
-/* Complete initialization of ESP structure and device
- * Caller must have initialized appropriate parts of the ESP structure
- * between the call to esp_allocate and this function.
- */
-void esp_initialize(struct NCR_ESP *esp)
-{
- struct ESP_regs *eregs = esp->eregs;
- unsigned int fmhz;
- unchar ccf;
- int i;
-
- /* Check out the clock properties of the chip. */
-
- /* This is getting messy but it has to be done
- * correctly or else you get weird behavior all
- * over the place. We are trying to basically
- * figure out three pieces of information.
- *
- * a) Clock Conversion Factor
- *
- * This is a representation of the input
- * crystal clock frequency going into the
- * ESP on this machine. Any operation whose
- * timing is longer than 400ns depends on this
- * value being correct. For example, you'll
- * get blips for arbitration/selection during
- * high load or with multiple targets if this
- * is not set correctly.
- *
- * b) Selection Time-Out
- *
- * The ESP isn't very bright and will arbitrate
- * for the bus and try to select a target
- * forever if you let it. This value tells
- * the ESP when it has taken too long to
- * negotiate and that it should interrupt
- * the CPU so we can see what happened.
- * The value is computed as follows (from
- * NCR/Symbios chip docs).
- *
- * (Time Out Period) * (Input Clock)
- * STO = ----------------------------------
- * (8192) * (Clock Conversion Factor)
- *
- * You usually want the time out period to be
- * around 250ms, I think we'll set it a little
- * bit higher to account for fully loaded SCSI
- * bus's and slow devices that don't respond so
- * quickly to selection attempts. (yeah, I know
- * this is out of spec. but there is a lot of
- * buggy pieces of firmware out there so bite me)
- *
- * c) Imperical constants for synchronous offset
- * and transfer period register values
- *
- * This entails the smallest and largest sync
- * period we could ever handle on this ESP.
- */
-
- fmhz = esp->cfreq;
-
- if(fmhz <= (5000000))
- ccf = 0;
- else
- ccf = (((5000000 - 1) + (fmhz))/(5000000));
- if(!ccf || ccf > 8) {
- /* If we can't find anything reasonable,
- * just assume 20MHZ. This is the clock
- * frequency of the older sun4c's where I've
- * been unable to find the clock-frequency
- * PROM property. All other machines provide
- * useful values it seems.
- */
- ccf = ESP_CCF_F4;
- fmhz = (20000000);
- }
- if(ccf==(ESP_CCF_F7+1))
- esp->cfact = ESP_CCF_F0;
- else if(ccf == ESP_CCF_NEVER)
- esp->cfact = ESP_CCF_F2;
- else
- esp->cfact = ccf;
- esp->cfreq = fmhz;
- esp->ccycle = ESP_MHZ_TO_CYCLE(fmhz);
- esp->ctick = ESP_TICK(ccf, esp->ccycle);
- esp->neg_defp = ESP_NEG_DEFP(fmhz, ccf);
- esp->sync_defp = SYNC_DEFP_SLOW;
-
- printk("SCSI ID %d Clk %dMHz CCF=%d TOut %d ",
- esp->scsi_id, (esp->cfreq / 1000000),
- ccf, (int) esp->neg_defp);
-
- /* Fill in ehost data */
- esp->ehost->base = (unsigned long)eregs;
- esp->ehost->this_id = esp->scsi_id;
- esp->ehost->irq = esp->irq;
-
- /* SCSI id mask */
- esp->scsi_id_mask = (1 << esp->scsi_id);
-
- /* Probe the revision of this esp */
- esp->config1 = (ESP_CONFIG1_PENABLE | (esp->scsi_id & 7));
- esp->config2 = (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY);
- esp_write(eregs->esp_cfg2, esp->config2);
- if((esp_read(eregs->esp_cfg2) & ~(ESP_CONFIG2_MAGIC)) !=
- (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY)) {
- printk("NCR53C90(esp100)\n");
- esp->erev = esp100;
- } else {
- esp->config2 = 0;
- esp_write(eregs->esp_cfg2, 0);
- esp_write(eregs->esp_cfg3, 5);
- if(esp_read(eregs->esp_cfg3) != 5) {
- printk("NCR53C90A(esp100a)\n");
- esp->erev = esp100a;
- } else {
- int target;
-
- for(target=0; target<8; target++)
- esp->config3[target] = 0;
- esp->prev_cfg3 = 0;
- esp_write(eregs->esp_cfg3, 0);
- if(ccf > ESP_CCF_F5) {
- printk("NCR53C9XF(espfast)\n");
- esp->erev = fast;
- esp->sync_defp = SYNC_DEFP_FAST;
- } else {
- printk("NCR53C9x(esp236)\n");
- esp->erev = esp236;
- }
- }
- }
-
- /* Initialize the command queues */
- esp->current_SC = NULL;
- esp->disconnected_SC = NULL;
- esp->issue_SC = NULL;
-
- /* Clear the state machines. */
- esp->targets_present = 0;
- esp->resetting_bus = 0;
- esp->snip = 0;
-
- init_waitqueue_head(&esp->reset_queue);
-
- esp->fas_premature_intr_workaround = 0;
- for(i = 0; i < 32; i++)
- esp->espcmdlog[i] = 0;
- esp->espcmdent = 0;
- for(i = 0; i < 16; i++) {
- esp->cur_msgout[i] = 0;
- esp->cur_msgin[i] = 0;
- }
- esp->prevmsgout = esp->prevmsgin = 0;
- esp->msgout_len = esp->msgin_len = 0;
-
- /* Clear the one behind caches to hold unmatchable values. */
- esp->prev_soff = esp->prev_stp = esp->prev_cfg3 = 0xff;
-
- /* Reset the thing before we try anything... */
- esp_bootup_reset(esp, eregs);
-
- esps_in_use++;
-}
-
-/* The info function will return whatever useful
- * information the developer sees fit. If not provided, then
- * the name field will be used instead.
- */
-const char *esp_info(struct Scsi_Host *host)
-{
- struct NCR_ESP *esp;
-
- esp = (struct NCR_ESP *) host->hostdata;
- switch(esp->erev) {
- case esp100:
- return "ESP100 (NCR53C90)";
- case esp100a:
- return "ESP100A (NCR53C90A)";
- case esp236:
- return "ESP236 (NCR53C9x)";
- case fas216:
- return "Emulex FAS216";
- case fas236:
- return "Emulex FAS236";
- case fas366:
- return "QLogic FAS366";
- case fas100a:
- return "FPESP100A";
- case fsc:
- return "Symbios Logic 53CF9x-2";
- default:
- panic("Bogon ESP revision");
- };
-}
-EXPORT_SYMBOL(esp_info);
-
-/* From Wolfgang Stanglmeier's NCR scsi driver. */
-struct info_str
-{
- char *buffer;
- int length;
- int offset;
- int pos;
-};
-
-static void copy_mem_info(struct info_str *info, char *data, int len)
-{
- if (info->pos + len > info->length)
- len = info->length - info->pos;
-
- if (info->pos + len < info->offset) {
- info->pos += len;
- return;
- }
- if (info->pos < info->offset) {
- data += (info->offset - info->pos);
- len -= (info->offset - info->pos);
- }
-
- if (len > 0) {
- memcpy(info->buffer + info->pos, data, len);
- info->pos += len;
- }
-}
-
-static int copy_info(struct info_str *info, char *fmt, ...)
-{
- va_list args;
- char buf[81];
- int len;
-
- va_start(args, fmt);
- len = vsprintf(buf, fmt, args);
- va_end(args);
-
- copy_mem_info(info, buf, len);
- return len;
-}
-
-static int esp_host_info(struct NCR_ESP *esp, char *ptr, off_t offset, int len)
-{
- struct scsi_device *sdev;
- struct info_str info;
- int i;
-
- info.buffer = ptr;
- info.length = len;
- info.offset = offset;
- info.pos = 0;
-
- copy_info(&info, "ESP Host Adapter:\n");
- copy_info(&info, "\tESP Model\t\t");
- switch(esp->erev) {
- case esp100:
- copy_info(&info, "ESP100 (NCR53C90)\n");
- break;
- case esp100a:
- copy_info(&info, "ESP100A (NCR53C90A)\n");
- break;
- case esp236:
- copy_info(&info, "ESP236 (NCR53C9x)\n");
- break;
- case fas216:
- copy_info(&info, "Emulex FAS216\n");
- break;
- case fas236:
- copy_info(&info, "Emulex FAS236\n");
- break;
- case fas100a:
- copy_info(&info, "FPESP100A\n");
- break;
- case fast:
- copy_info(&info, "Generic FAST\n");
- break;
- case fas366:
- copy_info(&info, "QLogic FAS366\n");
- break;
- case fsc:
- copy_info(&info, "Symbios Logic 53C9x-2\n");
- break;
- case espunknown:
- default:
- copy_info(&info, "Unknown!\n");
- break;
- };
- copy_info(&info, "\tLive Targets\t\t[ ");
- for(i = 0; i < 15; i++) {
- if(esp->targets_present & (1 << i))
- copy_info(&info, "%d ", i);
- }
- copy_info(&info, "]\n\n");
-
- /* Now describe the state of each existing target. */
- copy_info(&info, "Target #\tconfig3\t\tSync Capabilities\tDisconnect\n");
-
- shost_for_each_device(sdev, esp->ehost) {
- struct esp_device *esp_dev = sdev->hostdata;
- uint id = sdev->id;
-
- if (!(esp->targets_present & (1 << id)))
- continue;
-
- copy_info(&info, "%d\t\t", id);
- copy_info(&info, "%08lx\t", esp->config3[id]);
- copy_info(&info, "[%02lx,%02lx]\t\t\t",
- esp_dev->sync_max_offset,
- esp_dev->sync_min_period);
- copy_info(&info, "%s\n", esp_dev->disconnect ? "yes" : "no");
- }
-
- return info.pos > info.offset? info.pos - info.offset : 0;
-}
-
-/* ESP proc filesystem code. */
-int esp_proc_info(struct Scsi_Host *shost, char *buffer, char **start, off_t offset, int length,
- int inout)
-{
- struct NCR_ESP *esp = (struct NCR_ESP *)shost->hostdata;
-
- if(inout)
- return -EINVAL; /* not yet */
- if(start)
- *start = buffer;
- return esp_host_info(esp, buffer, offset, length);
-}
-EXPORT_SYMBOL(esp_proc_info);
-
-static void esp_get_dmabufs(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- if(sp->use_sg == 0) {
- sp->SCp.this_residual = sp->request_bufflen;
- sp->SCp.buffer = (struct scatterlist *) sp->request_buffer;
- sp->SCp.buffers_residual = 0;
- if (esp->dma_mmu_get_scsi_one)
- esp->dma_mmu_get_scsi_one(esp, sp);
- else
- sp->SCp.ptr =
- (char *) virt_to_phys(sp->request_buffer);
- } else {
- sp->SCp.buffer = (struct scatterlist *) sp->request_buffer;
- sp->SCp.buffers_residual = sp->use_sg - 1;
- sp->SCp.this_residual = sp->SCp.buffer->length;
- if (esp->dma_mmu_get_scsi_sgl)
- esp->dma_mmu_get_scsi_sgl(esp, sp);
- else
- sp->SCp.ptr =
- (char *) virt_to_phys(sg_virt(sp->SCp.buffer));
- }
-}
-
-static void esp_release_dmabufs(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- if(sp->use_sg == 0) {
- if (esp->dma_mmu_release_scsi_one)
- esp->dma_mmu_release_scsi_one(esp, sp);
- } else {
- if (esp->dma_mmu_release_scsi_sgl)
- esp->dma_mmu_release_scsi_sgl(esp, sp);
- }
-}
-
-static void esp_restore_pointers(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- struct esp_pointers *ep = &esp->data_pointers[scmd_id(sp)];
-
- sp->SCp.ptr = ep->saved_ptr;
- sp->SCp.buffer = ep->saved_buffer;
- sp->SCp.this_residual = ep->saved_this_residual;
- sp->SCp.buffers_residual = ep->saved_buffers_residual;
-}
-
-static void esp_save_pointers(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- struct esp_pointers *ep = &esp->data_pointers[scmd_id(sp)];
-
- ep->saved_ptr = sp->SCp.ptr;
- ep->saved_buffer = sp->SCp.buffer;
- ep->saved_this_residual = sp->SCp.this_residual;
- ep->saved_buffers_residual = sp->SCp.buffers_residual;
-}
-
-/* Some rules:
- *
- * 1) Never ever panic while something is live on the bus.
- * If there is to be any chance of syncing the disks this
- * rule is to be obeyed.
- *
- * 2) Any target that causes a foul condition will no longer
- * have synchronous transfers done to it, no questions
- * asked.
- *
- * 3) Keep register accesses to a minimum. Think about some
- * day when we have Xbus machines this is running on and
- * the ESP chip is on the other end of the machine on a
- * different board from the cpu where this is running.
- */
-
-/* Fire off a command. We assume the bus is free and that the only
- * case where we could see an interrupt is where we have disconnected
- * commands active and they are trying to reselect us.
- */
-static inline void esp_check_cmd(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- switch(sp->cmd_len) {
- case 6:
- case 10:
- case 12:
- esp->esp_slowcmd = 0;
- break;
-
- default:
- esp->esp_slowcmd = 1;
- esp->esp_scmdleft = sp->cmd_len;
- esp->esp_scmdp = &sp->cmnd[0];
- break;
- };
-}
-
-static inline void build_sync_nego_msg(struct NCR_ESP *esp, int period, int offset)
-{
- esp->cur_msgout[0] = EXTENDED_MESSAGE;
- esp->cur_msgout[1] = 3;
- esp->cur_msgout[2] = EXTENDED_SDTR;
- esp->cur_msgout[3] = period;
- esp->cur_msgout[4] = offset;
- esp->msgout_len = 5;
-}
-
-static void esp_exec_cmd(struct NCR_ESP *esp)
-{
- struct ESP_regs *eregs = esp->eregs;
- struct esp_device *esp_dev;
- Scsi_Cmnd *SCptr;
- struct scsi_device *SDptr;
- volatile unchar *cmdp = esp->esp_command;
- unsigned char the_esp_command;
- int lun, target;
- int i;
-
- /* Hold off if we have disconnected commands and
- * an IRQ is showing...
- */
- if(esp->disconnected_SC && esp->dma_irq_p(esp))
- return;
-
- /* Grab first member of the issue queue. */
- SCptr = esp->current_SC = remove_first_SC(&esp->issue_SC);
-
- /* Safe to panic here because current_SC is null. */
- if(!SCptr)
- panic("esp: esp_exec_cmd and issue queue is NULL");
-
- SDptr = SCptr->device;
- esp_dev = SDptr->hostdata;
- lun = SCptr->device->lun;
- target = SCptr->device->id;
-
- esp->snip = 0;
- esp->msgout_len = 0;
-
- /* Send it out whole, or piece by piece? The ESP
- * only knows how to automatically send out 6, 10,
- * and 12 byte commands. I used to think that the
- * Linux SCSI code would never throw anything other
- * than that to us, but then again there is the
- * SCSI generic driver which can send us anything.
- */
- esp_check_cmd(esp, SCptr);
-
- /* If arbitration/selection is successful, the ESP will leave
- * ATN asserted, causing the target to go into message out
- * phase. The ESP will feed the target the identify and then
- * the target can only legally go to one of command,
- * datain/out, status, or message in phase, or stay in message
- * out phase (should we be trying to send a sync negotiation
- * message after the identify). It is not allowed to drop
- * BSY, but some buggy targets do and we check for this
- * condition in the selection complete code. Most of the time
- * we'll make the command bytes available to the ESP and it
- * will not interrupt us until it finishes command phase, we
- * cannot do this for command sizes the ESP does not
- * understand and in this case we'll get interrupted right
- * when the target goes into command phase.
- *
- * It is absolutely _illegal_ in the presence of SCSI-2 devices
- * to use the ESP select w/o ATN command. When SCSI-2 devices are
- * present on the bus we _must_ always go straight to message out
- * phase with an identify message for the target. Being that
- * selection attempts in SCSI-1 w/o ATN was an option, doing SCSI-2
- * selections should not confuse SCSI-1 we hope.
- */
-
- if(esp_dev->sync) {
- /* this targets sync is known */
-#ifdef CONFIG_SCSI_MAC_ESP
-do_sync_known:
-#endif
- if(esp_dev->disconnect)
- *cmdp++ = IDENTIFY(1, lun);
- else
- *cmdp++ = IDENTIFY(0, lun);
-
- if(esp->esp_slowcmd) {
- the_esp_command = (ESP_CMD_SELAS | ESP_CMD_DMA);
- esp_advance_phase(SCptr, in_slct_stop);
- } else {
- the_esp_command = (ESP_CMD_SELA | ESP_CMD_DMA);
- esp_advance_phase(SCptr, in_slct_norm);
- }
- } else if(!(esp->targets_present & (1<disconnect)) {
- /* After the bootup SCSI code sends both the
- * TEST_UNIT_READY and INQUIRY commands we want
- * to at least attempt allowing the device to
- * disconnect.
- */
- ESPMISC(("esp: Selecting device for first time. target=%d "
- "lun=%d\n", target, SCptr->device->lun));
- if(!SDptr->borken && !esp_dev->disconnect)
- esp_dev->disconnect = 1;
-
- *cmdp++ = IDENTIFY(0, lun);
- esp->prevmsgout = NOP;
- esp_advance_phase(SCptr, in_slct_norm);
- the_esp_command = (ESP_CMD_SELA | ESP_CMD_DMA);
-
- /* Take no chances... */
- esp_dev->sync_max_offset = 0;
- esp_dev->sync_min_period = 0;
- } else {
- int toshiba_cdrom_hwbug_wkaround = 0;
-
-#ifdef CONFIG_SCSI_MAC_ESP
- /* Never allow synchronous transfers (disconnect OK) on
- * Macintosh. Well, maybe later when we figured out how to
- * do DMA on the machines that support it ...
- */
- esp_dev->disconnect = 1;
- esp_dev->sync_max_offset = 0;
- esp_dev->sync_min_period = 0;
- esp_dev->sync = 1;
- esp->snip = 0;
- goto do_sync_known;
-#endif
- /* We've talked to this guy before,
- * but never negotiated. Let's try
- * sync negotiation.
- */
- if(!SDptr->borken) {
- if((SDptr->type == TYPE_ROM) &&
- (!strncmp(SDptr->vendor, "TOSHIBA", 7))) {
- /* Nice try sucker... */
- ESPMISC(("esp%d: Disabling sync for buggy "
- "Toshiba CDROM.\n", esp->esp_id));
- toshiba_cdrom_hwbug_wkaround = 1;
- build_sync_nego_msg(esp, 0, 0);
- } else {
- build_sync_nego_msg(esp, esp->sync_defp, 15);
- }
- } else {
- build_sync_nego_msg(esp, 0, 0);
- }
- esp_dev->sync = 1;
- esp->snip = 1;
-
- /* A fix for broken SCSI1 targets, when they disconnect
- * they lock up the bus and confuse ESP. So disallow
- * disconnects for SCSI1 targets for now until we
- * find a better fix.
- *
- * Addendum: This is funny, I figured out what was going
- * on. The blotzed SCSI1 target would disconnect,
- * one of the other SCSI2 targets or both would be
- * disconnected as well. The SCSI1 target would
- * stay disconnected long enough that we start
- * up a command on one of the SCSI2 targets. As
- * the ESP is arbitrating for the bus the SCSI1
- * target begins to arbitrate as well to reselect
- * the ESP. The SCSI1 target refuses to drop it's
- * ID bit on the data bus even though the ESP is
- * at ID 7 and is the obvious winner for any
- * arbitration. The ESP is a poor sport and refuses
- * to lose arbitration, it will continue indefinitely
- * trying to arbitrate for the bus and can only be
- * stopped via a chip reset or SCSI bus reset.
- * Therefore _no_ disconnects for SCSI1 targets
- * thank you very much. ;-)
- */
- if(((SDptr->scsi_level < 3) && (SDptr->type != TYPE_TAPE)) ||
- toshiba_cdrom_hwbug_wkaround || SDptr->borken) {
- ESPMISC((KERN_INFO "esp%d: Disabling DISCONNECT for target %d "
- "lun %d\n", esp->esp_id, SCptr->device->id, SCptr->device->lun));
- esp_dev->disconnect = 0;
- *cmdp++ = IDENTIFY(0, lun);
- } else {
- *cmdp++ = IDENTIFY(1, lun);
- }
-
- /* ESP fifo is only so big...
- * Make this look like a slow command.
- */
- esp->esp_slowcmd = 1;
- esp->esp_scmdleft = SCptr->cmd_len;
- esp->esp_scmdp = &SCptr->cmnd[0];
-
- the_esp_command = (ESP_CMD_SELAS | ESP_CMD_DMA);
- esp_advance_phase(SCptr, in_slct_msg);
- }
-
- if(!esp->esp_slowcmd)
- for(i = 0; i < SCptr->cmd_len; i++)
- *cmdp++ = SCptr->cmnd[i];
-
- esp_write(eregs->esp_busid, (target & 7));
- if (esp->prev_soff != esp_dev->sync_max_offset ||
- esp->prev_stp != esp_dev->sync_min_period ||
- (esp->erev > esp100a &&
- esp->prev_cfg3 != esp->config3[target])) {
- esp->prev_soff = esp_dev->sync_max_offset;
- esp_write(eregs->esp_soff, esp->prev_soff);
- esp->prev_stp = esp_dev->sync_min_period;
- esp_write(eregs->esp_stp, esp->prev_stp);
- if(esp->erev > esp100a) {
- esp->prev_cfg3 = esp->config3[target];
- esp_write(eregs->esp_cfg3, esp->prev_cfg3);
- }
- }
- i = (cmdp - esp->esp_command);
-
- /* Set up the DMA and ESP counters */
- if(esp->do_pio_cmds){
- int j = 0;
-
- /*
- * XXX MSch:
- *
- * It seems this is required, at least to clean up
- * after failed commands when using PIO mode ...
- */
- esp_cmd(esp, eregs, ESP_CMD_FLUSH);
-
- for(;jesp_fdata, esp->esp_command[j]);
- the_esp_command &= ~ESP_CMD_DMA;
-
- /* Tell ESP to "go". */
- esp_cmd(esp, eregs, the_esp_command);
- } else {
- /* Set up the ESP counters */
- esp_write(eregs->esp_tclow, i);
- esp_write(eregs->esp_tcmed, 0);
- esp->dma_init_write(esp, esp->esp_command_dvma, i);
-
- /* Tell ESP to "go". */
- esp_cmd(esp, eregs, the_esp_command);
- }
-}
-
-/* Queue a SCSI command delivered from the mid-level Linux SCSI code. */
-int esp_queue(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
-{
- struct NCR_ESP *esp;
-
- /* Set up func ptr and initial driver cmd-phase. */
- SCpnt->scsi_done = done;
- SCpnt->SCp.phase = not_issued;
-
- esp = (struct NCR_ESP *) SCpnt->device->host->hostdata;
-
- if(esp->dma_led_on)
- esp->dma_led_on(esp);
-
- /* We use the scratch area. */
- ESPQUEUE(("esp_queue: target=%d lun=%d ", SCpnt->device->id, SCpnt->lun));
- ESPDISC(("N<%02x,%02x>", SCpnt->device->id, SCpnt->lun));
-
- esp_get_dmabufs(esp, SCpnt);
- esp_save_pointers(esp, SCpnt); /* FIXME for tag queueing */
-
- SCpnt->SCp.Status = CHECK_CONDITION;
- SCpnt->SCp.Message = 0xff;
- SCpnt->SCp.sent_command = 0;
-
- /* Place into our queue. */
- if(SCpnt->cmnd[0] == REQUEST_SENSE) {
- ESPQUEUE(("RQSENSE\n"));
- prepend_SC(&esp->issue_SC, SCpnt);
- } else {
- ESPQUEUE(("\n"));
- append_SC(&esp->issue_SC, SCpnt);
- }
-
- /* Run it now if we can. */
- if(!esp->current_SC && !esp->resetting_bus)
- esp_exec_cmd(esp);
-
- return 0;
-}
-
-/* Dump driver state. */
-static void esp_dump_cmd(Scsi_Cmnd *SCptr)
-{
- ESPLOG(("[tgt<%02x> lun<%02x> "
- "pphase<%s> cphase<%s>]",
- SCptr->device->id, SCptr->device->lun,
- phase_string(SCptr->SCp.sent_command),
- phase_string(SCptr->SCp.phase)));
-}
-
-static void esp_dump_state(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- Scsi_Cmnd *SCptr = esp->current_SC;
-#ifdef DEBUG_ESP_CMDS
- int i;
-#endif
-
- ESPLOG(("esp%d: dumping state\n", esp->esp_id));
-
- /* Print DMA status */
- esp->dma_dump_state(esp);
-
- ESPLOG(("esp%d: SW [sreg<%02x> sstep<%02x> ireg<%02x>]\n",
- esp->esp_id, esp->sreg, esp->seqreg, esp->ireg));
- ESPLOG(("esp%d: HW reread [sreg<%02x> sstep<%02x> ireg<%02x>]\n",
- esp->esp_id, esp_read(eregs->esp_status), esp_read(eregs->esp_sstep),
- esp_read(eregs->esp_intrpt)));
-#ifdef DEBUG_ESP_CMDS
- printk("esp%d: last ESP cmds [", esp->esp_id);
- i = (esp->espcmdent - 1) & 31;
- printk("<");
- esp_print_cmd(esp->espcmdlog[i]);
- printk(">");
- i = (i - 1) & 31;
- printk("<");
- esp_print_cmd(esp->espcmdlog[i]);
- printk(">");
- i = (i - 1) & 31;
- printk("<");
- esp_print_cmd(esp->espcmdlog[i]);
- printk(">");
- i = (i - 1) & 31;
- printk("<");
- esp_print_cmd(esp->espcmdlog[i]);
- printk(">");
- printk("]\n");
-#endif /* (DEBUG_ESP_CMDS) */
-
- if(SCptr) {
- ESPLOG(("esp%d: current command ", esp->esp_id));
- esp_dump_cmd(SCptr);
- }
- ESPLOG(("\n"));
- SCptr = esp->disconnected_SC;
- ESPLOG(("esp%d: disconnected ", esp->esp_id));
- while(SCptr) {
- esp_dump_cmd(SCptr);
- SCptr = (Scsi_Cmnd *) SCptr->host_scribble;
- }
- ESPLOG(("\n"));
-}
-
-/* Abort a command. The host_lock is acquired by caller. */
-int esp_abort(Scsi_Cmnd *SCptr)
-{
- struct NCR_ESP *esp = (struct NCR_ESP *) SCptr->device->host->hostdata;
- struct ESP_regs *eregs = esp->eregs;
- int don;
-
- ESPLOG(("esp%d: Aborting command\n", esp->esp_id));
- esp_dump_state(esp, eregs);
-
- /* Wheee, if this is the current command on the bus, the
- * best we can do is assert ATN and wait for msgout phase.
- * This should even fix a hung SCSI bus when we lose state
- * in the driver and timeout because the eventual phase change
- * will cause the ESP to (eventually) give an interrupt.
- */
- if(esp->current_SC == SCptr) {
- esp->cur_msgout[0] = ABORT;
- esp->msgout_len = 1;
- esp->msgout_ctr = 0;
- esp_cmd(esp, eregs, ESP_CMD_SATN);
- return SUCCESS;
- }
-
- /* If it is still in the issue queue then we can safely
- * call the completion routine and report abort success.
- */
- don = esp->dma_ports_p(esp);
- if(don) {
- esp->dma_ints_off(esp);
- synchronize_irq(esp->irq);
- }
- if(esp->issue_SC) {
- Scsi_Cmnd **prev, *this;
- for(prev = (&esp->issue_SC), this = esp->issue_SC;
- this;
- prev = (Scsi_Cmnd **) &(this->host_scribble),
- this = (Scsi_Cmnd *) this->host_scribble) {
- if(this == SCptr) {
- *prev = (Scsi_Cmnd *) this->host_scribble;
- this->host_scribble = NULL;
- esp_release_dmabufs(esp, this);
- this->result = DID_ABORT << 16;
- this->scsi_done(this);
- if(don)
- esp->dma_ints_on(esp);
- return SUCCESS;
- }
- }
- }
-
- /* Yuck, the command to abort is disconnected, it is not
- * worth trying to abort it now if something else is live
- * on the bus at this time. So, we let the SCSI code wait
- * a little bit and try again later.
- */
- if(esp->current_SC) {
- if(don)
- esp->dma_ints_on(esp);
- return FAILED;
- }
-
- /* It's disconnected, we have to reconnect to re-establish
- * the nexus and tell the device to abort. However, we really
- * cannot 'reconnect' per se. Don't try to be fancy, just
- * indicate failure, which causes our caller to reset the whole
- * bus.
- */
-
- if(don)
- esp->dma_ints_on(esp);
- return FAILED;
-}
-
-/* We've sent ESP_CMD_RS to the ESP, the interrupt had just
- * arrived indicating the end of the SCSI bus reset. Our job
- * is to clean out the command queues and begin re-execution
- * of SCSI commands once more.
- */
-static int esp_finish_reset(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- Scsi_Cmnd *sp = esp->current_SC;
-
- /* Clean up currently executing command, if any. */
- if (sp != NULL) {
- esp_release_dmabufs(esp, sp);
- sp->result = (DID_RESET << 16);
- sp->scsi_done(sp);
- esp->current_SC = NULL;
- }
-
- /* Clean up disconnected queue, they have been invalidated
- * by the bus reset.
- */
- if (esp->disconnected_SC) {
- while((sp = remove_first_SC(&esp->disconnected_SC)) != NULL) {
- esp_release_dmabufs(esp, sp);
- sp->result = (DID_RESET << 16);
- sp->scsi_done(sp);
- }
- }
-
- /* SCSI bus reset is complete. */
- esp->resetting_bus = 0;
- wake_up(&esp->reset_queue);
-
- /* Ok, now it is safe to get commands going once more. */
- if(esp->issue_SC)
- esp_exec_cmd(esp);
-
- return do_intr_end;
-}
-
-static int esp_do_resetbus(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- ESPLOG(("esp%d: Resetting scsi bus\n", esp->esp_id));
- esp->resetting_bus = 1;
- esp_cmd(esp, eregs, ESP_CMD_RS);
-
- return do_intr_end;
-}
-
-/* Reset ESP chip, reset hanging bus, then kill active and
- * disconnected commands for targets without soft reset.
- *
- * The host_lock is acquired by caller.
- */
-int esp_reset(Scsi_Cmnd *SCptr)
-{
- struct NCR_ESP *esp = (struct NCR_ESP *) SCptr->device->host->hostdata;
-
- spin_lock_irq(esp->ehost->host_lock);
- (void) esp_do_resetbus(esp, esp->eregs);
- spin_unlock_irq(esp->ehost->host_lock);
-
- wait_event(esp->reset_queue, (esp->resetting_bus == 0));
-
- return SUCCESS;
-}
-
-/* Internal ESP done function. */
-static void esp_done(struct NCR_ESP *esp, int error)
-{
- Scsi_Cmnd *done_SC;
-
- if(esp->current_SC) {
- done_SC = esp->current_SC;
- esp->current_SC = NULL;
- esp_release_dmabufs(esp, done_SC);
- done_SC->result = error;
- done_SC->scsi_done(done_SC);
-
- /* Bus is free, issue any commands in the queue. */
- if(esp->issue_SC && !esp->current_SC)
- esp_exec_cmd(esp);
- } else {
- /* Panic is safe as current_SC is null so we may still
- * be able to accept more commands to sync disk buffers.
- */
- ESPLOG(("panicing\n"));
- panic("esp: done() called with NULL esp->current_SC");
- }
-}
-
-/* Wheee, ESP interrupt engine. */
-
-/* Forward declarations. */
-static int esp_do_phase_determine(struct NCR_ESP *esp,
- struct ESP_regs *eregs);
-static int esp_do_data_finale(struct NCR_ESP *esp, struct ESP_regs *eregs);
-static int esp_select_complete(struct NCR_ESP *esp, struct ESP_regs *eregs);
-static int esp_do_status(struct NCR_ESP *esp, struct ESP_regs *eregs);
-static int esp_do_msgin(struct NCR_ESP *esp, struct ESP_regs *eregs);
-static int esp_do_msgindone(struct NCR_ESP *esp, struct ESP_regs *eregs);
-static int esp_do_msgout(struct NCR_ESP *esp, struct ESP_regs *eregs);
-static int esp_do_cmdbegin(struct NCR_ESP *esp, struct ESP_regs *eregs);
-
-#define sreg_datainp(__sreg) (((__sreg) & ESP_STAT_PMASK) == ESP_DIP)
-#define sreg_dataoutp(__sreg) (((__sreg) & ESP_STAT_PMASK) == ESP_DOP)
-
-/* We try to avoid some interrupts by jumping ahead and see if the ESP
- * has gotten far enough yet. Hence the following.
- */
-static inline int skipahead1(struct NCR_ESP *esp, struct ESP_regs *eregs,
- Scsi_Cmnd *scp, int prev_phase, int new_phase)
-{
- if(scp->SCp.sent_command != prev_phase)
- return 0;
-
- if(esp->dma_irq_p(esp)) {
- /* Yes, we are able to save an interrupt. */
- esp->sreg = (esp_read(eregs->esp_status) & ~(ESP_STAT_INTR));
- esp->ireg = esp_read(eregs->esp_intrpt);
- if(!(esp->ireg & ESP_INTR_SR))
- return 0;
- else
- return do_reset_complete;
- }
- /* Ho hum, target is taking forever... */
- scp->SCp.sent_command = new_phase; /* so we don't recurse... */
- return do_intr_end;
-}
-
-static inline int skipahead2(struct NCR_ESP *esp,
- struct ESP_regs *eregs,
- Scsi_Cmnd *scp, int prev_phase1, int prev_phase2,
- int new_phase)
-{
- if(scp->SCp.sent_command != prev_phase1 &&
- scp->SCp.sent_command != prev_phase2)
- return 0;
- if(esp->dma_irq_p(esp)) {
- /* Yes, we are able to save an interrupt. */
- esp->sreg = (esp_read(eregs->esp_status) & ~(ESP_STAT_INTR));
- esp->ireg = esp_read(eregs->esp_intrpt);
- if(!(esp->ireg & ESP_INTR_SR))
- return 0;
- else
- return do_reset_complete;
- }
- /* Ho hum, target is taking forever... */
- scp->SCp.sent_command = new_phase; /* so we don't recurse... */
- return do_intr_end;
-}
-
-/* Misc. esp helper macros. */
-#define esp_setcount(__eregs, __cnt) \
- esp_write((__eregs)->esp_tclow, ((__cnt) & 0xff)); \
- esp_write((__eregs)->esp_tcmed, (((__cnt) >> 8) & 0xff))
-
-#define esp_getcount(__eregs) \
- ((esp_read((__eregs)->esp_tclow)&0xff) | \
- ((esp_read((__eregs)->esp_tcmed)&0xff) << 8))
-
-#define fcount(__esp, __eregs) \
- (esp_read((__eregs)->esp_fflags) & ESP_FF_FBYTES)
-
-#define fnzero(__esp, __eregs) \
- (esp_read((__eregs)->esp_fflags) & ESP_FF_ONOTZERO)
-
-/* XXX speculative nops unnecessary when continuing amidst a data phase
- * XXX even on esp100!!! another case of flooding the bus with I/O reg
- * XXX writes...
- */
-#define esp_maybe_nop(__esp, __eregs) \
- if((__esp)->erev == esp100) \
- esp_cmd((__esp), (__eregs), ESP_CMD_NULL)
-
-#define sreg_to_dataphase(__sreg) \
- ((((__sreg) & ESP_STAT_PMASK) == ESP_DOP) ? in_dataout : in_datain)
-
-/* The ESP100 when in synchronous data phase, can mistake a long final
- * REQ pulse from the target as an extra byte, it places whatever is on
- * the data lines into the fifo. For now, we will assume when this
- * happens that the target is a bit quirky and we don't want to
- * be talking synchronously to it anyways. Regardless, we need to
- * tell the ESP to eat the extraneous byte so that we can proceed
- * to the next phase.
- */
-static inline int esp100_sync_hwbug(struct NCR_ESP *esp, struct ESP_regs *eregs,
- Scsi_Cmnd *sp, int fifocnt)
-{
- /* Do not touch this piece of code. */
- if((!(esp->erev == esp100)) ||
- (!(sreg_datainp((esp->sreg = esp_read(eregs->esp_status))) && !fifocnt) &&
- !(sreg_dataoutp(esp->sreg) && !fnzero(esp, eregs)))) {
- if(sp->SCp.phase == in_dataout)
- esp_cmd(esp, eregs, ESP_CMD_FLUSH);
- return 0;
- } else {
- /* Async mode for this guy. */
- build_sync_nego_msg(esp, 0, 0);
-
- /* Ack the bogus byte, but set ATN first. */
- esp_cmd(esp, eregs, ESP_CMD_SATN);
- esp_cmd(esp, eregs, ESP_CMD_MOK);
- return 1;
- }
-}
-
-/* This closes the window during a selection with a reselect pending, because
- * we use DMA for the selection process the FIFO should hold the correct
- * contents if we get reselected during this process. So we just need to
- * ack the possible illegal cmd interrupt pending on the esp100.
- */
-static inline int esp100_reconnect_hwbug(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- volatile unchar junk;
-
- if(esp->erev != esp100)
- return 0;
- junk = esp_read(eregs->esp_intrpt);
-
- if(junk & ESP_INTR_SR)
- return 1;
- return 0;
-}
-
-/* This verifies the BUSID bits during a reselection so that we know which
- * target is talking to us.
- */
-static inline int reconnect_target(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- int it, me = esp->scsi_id_mask, targ = 0;
-
- if(2 != fcount(esp, eregs))
- return -1;
- it = esp_read(eregs->esp_fdata);
- if(!(it & me))
- return -1;
- it &= ~me;
- if(it & (it - 1))
- return -1;
- while(!(it & 1))
- targ++, it >>= 1;
- return targ;
-}
-
-/* This verifies the identify from the target so that we know which lun is
- * being reconnected.
- */
-static inline int reconnect_lun(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- int lun;
-
- if((esp->sreg & ESP_STAT_PMASK) != ESP_MIP)
- return -1;
- lun = esp_read(eregs->esp_fdata);
-
- /* Yes, you read this correctly. We report lun of zero
- * if we see parity error. ESP reports parity error for
- * the lun byte, and this is the only way to hope to recover
- * because the target is connected.
- */
- if(esp->sreg & ESP_STAT_PERR)
- return 0;
-
- /* Check for illegal bits being set in the lun. */
- if((lun & 0x40) || !(lun & 0x80))
- return -1;
-
- return lun & 7;
-}
-
-/* This puts the driver in a state where it can revitalize a command that
- * is being continued due to reselection.
- */
-static inline void esp_connect(struct NCR_ESP *esp, struct ESP_regs *eregs,
- Scsi_Cmnd *sp)
-{
- struct scsi_device *dp = sp->device;
- struct esp_device *esp_dev = dp->hostdata;
-
- if(esp->prev_soff != esp_dev->sync_max_offset ||
- esp->prev_stp != esp_dev->sync_min_period ||
- (esp->erev > esp100a &&
- esp->prev_cfg3 != esp->config3[scmd_id(sp)])) {
- esp->prev_soff = esp_dev->sync_max_offset;
- esp_write(eregs->esp_soff, esp->prev_soff);
- esp->prev_stp = esp_dev->sync_min_period;
- esp_write(eregs->esp_stp, esp->prev_stp);
- if(esp->erev > esp100a) {
- esp->prev_cfg3 = esp->config3[scmd_id(sp)];
- esp_write(eregs->esp_cfg3, esp->prev_cfg3);
- }
- }
- esp->current_SC = sp;
-}
-
-/* This will place the current working command back into the issue queue
- * if we are to receive a reselection amidst a selection attempt.
- */
-static inline void esp_reconnect(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- if(!esp->disconnected_SC)
- ESPLOG(("esp%d: Weird, being reselected but disconnected "
- "command queue is empty.\n", esp->esp_id));
- esp->snip = 0;
- esp->current_SC = NULL;
- sp->SCp.phase = not_issued;
- append_SC(&esp->issue_SC, sp);
-}
-
-/* Begin message in phase. */
-static int esp_do_msgin(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- esp_cmd(esp, eregs, ESP_CMD_FLUSH);
- esp_maybe_nop(esp, eregs);
- esp_cmd(esp, eregs, ESP_CMD_TI);
- esp->msgin_len = 1;
- esp->msgin_ctr = 0;
- esp_advance_phase(esp->current_SC, in_msgindone);
- return do_work_bus;
-}
-
-static inline void advance_sg(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- ++sp->SCp.buffer;
- --sp->SCp.buffers_residual;
- sp->SCp.this_residual = sp->SCp.buffer->length;
- if (esp->dma_advance_sg)
- esp->dma_advance_sg (sp);
- else
- sp->SCp.ptr = (char *) virt_to_phys(sg_virt(sp->SCp.buffer));
-
-}
-
-/* Please note that the way I've coded these routines is that I _always_
- * check for a disconnect during any and all information transfer
- * phases. The SCSI standard states that the target _can_ cause a BUS
- * FREE condition by dropping all MSG/CD/IO/BSY signals. Also note
- * that during information transfer phases the target controls every
- * change in phase, the only thing the initiator can do is "ask" for
- * a message out phase by driving ATN true. The target can, and sometimes
- * will, completely ignore this request so we cannot assume anything when
- * we try to force a message out phase to abort/reset a target. Most of
- * the time the target will eventually be nice and go to message out, so
- * we may have to hold on to our state about what we want to tell the target
- * for some period of time.
- */
-
-/* I think I have things working here correctly. Even partial transfers
- * within a buffer or sub-buffer should not upset us at all no matter
- * how bad the target and/or ESP fucks things up.
- */
-static int esp_do_data(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- Scsi_Cmnd *SCptr = esp->current_SC;
- int thisphase, hmuch;
-
- ESPDATA(("esp_do_data: "));
- esp_maybe_nop(esp, eregs);
- thisphase = sreg_to_dataphase(esp->sreg);
- esp_advance_phase(SCptr, thisphase);
- ESPDATA(("newphase<%s> ", (thisphase == in_datain) ? "DATAIN" : "DATAOUT"));
- hmuch = esp->dma_can_transfer(esp, SCptr);
-
- /*
- * XXX MSch: cater for PIO transfer here; PIO used if hmuch == 0
- */
- if (hmuch) { /* DMA */
- /*
- * DMA
- */
- ESPDATA(("hmuch<%d> ", hmuch));
- esp->current_transfer_size = hmuch;
- esp_setcount(eregs, (esp->fas_premature_intr_workaround ?
- (hmuch + 0x40) : hmuch));
- esp->dma_setup(esp, (__u32)((unsigned long)SCptr->SCp.ptr),
- hmuch, (thisphase == in_datain));
- ESPDATA(("DMA|TI --> do_intr_end\n"));
- esp_cmd(esp, eregs, ESP_CMD_DMA | ESP_CMD_TI);
- return do_intr_end;
- /*
- * end DMA
- */
- } else {
- /*
- * PIO
- */
- int oldphase, i = 0; /* or where we left off last time ?? esp->current_data ?? */
- int fifocnt = 0;
- unsigned char *p = phys_to_virt((unsigned long)SCptr->SCp.ptr);
-
- oldphase = esp_read(eregs->esp_status) & ESP_STAT_PMASK;
-
- /*
- * polled transfer; ugly, can we make this happen in a DRQ
- * interrupt handler ??
- * requires keeping track of state information in host or
- * command struct!
- * Problem: I've never seen a DRQ happen on Mac, not even
- * with ESP_CMD_DMA ...
- */
-
- /* figure out how much needs to be transferred */
- hmuch = SCptr->SCp.this_residual;
- ESPDATA(("hmuch<%d> pio ", hmuch));
- esp->current_transfer_size = hmuch;
-
- /* tell the ESP ... */
- esp_setcount(eregs, hmuch);
-
- /* loop */
- while (hmuch) {
- int j, fifo_stuck = 0, newphase;
- unsigned long timeout;
-#if 0
- unsigned long flags;
-#endif
-#if 0
- if ( i % 10 )
- ESPDATA(("\r"));
- else
- ESPDATA(( /*"\n"*/ "\r"));
-#endif
-#if 0
- local_irq_save(flags);
-#endif
- if(thisphase == in_datain) {
- /* 'go' ... */
- esp_cmd(esp, eregs, ESP_CMD_TI);
-
- /* wait for data */
- timeout = 1000000;
- while (!((esp->sreg=esp_read(eregs->esp_status)) & ESP_STAT_INTR) && --timeout)
- udelay(2);
- if (timeout == 0)
- printk("DRQ datain timeout! \n");
-
- newphase = esp->sreg & ESP_STAT_PMASK;
-
- /* see how much we got ... */
- fifocnt = (esp_read(eregs->esp_fflags) & ESP_FF_FBYTES);
-
- if (!fifocnt)
- fifo_stuck++;
- else
- fifo_stuck = 0;
-
- ESPDATA(("\rgot %d st %x ph %x", fifocnt, esp->sreg, newphase));
-
- /* read fifo */
- for(j=0;jesp_fdata);
-
- ESPDATA(("(%d) ", i));
-
- /* how many to go ?? */
- hmuch -= fifocnt;
-
- /* break if status phase !! */
- if(newphase == ESP_STATP) {
- /* clear int. */
- esp->ireg = esp_read(eregs->esp_intrpt);
- break;
- }
- } else {
-#define MAX_FIFO 8
- /* how much will fit ? */
- int this_count = MAX_FIFO - fifocnt;
- if (this_count > hmuch)
- this_count = hmuch;
-
- /* fill fifo */
- for(j=0;jesp_fdata, p[i++]);
-
- /* how many left if this goes out ?? */
- hmuch -= this_count;
-
- /* 'go' ... */
- esp_cmd(esp, eregs, ESP_CMD_TI);
-
- /* wait for 'got it' */
- timeout = 1000000;
- while (!((esp->sreg=esp_read(eregs->esp_status)) & ESP_STAT_INTR) && --timeout)
- udelay(2);
- if (timeout == 0)
- printk("DRQ dataout timeout! \n");
-
- newphase = esp->sreg & ESP_STAT_PMASK;
-
- /* need to check how much was sent ?? */
- fifocnt = (esp_read(eregs->esp_fflags) & ESP_FF_FBYTES);
-
- ESPDATA(("\rsent %d st %x ph %x", this_count - fifocnt, esp->sreg, newphase));
-
- ESPDATA(("(%d) ", i));
-
- /* break if status phase !! */
- if(newphase == ESP_STATP) {
- /* clear int. */
- esp->ireg = esp_read(eregs->esp_intrpt);
- break;
- }
-
- }
-
- /* clear int. */
- esp->ireg = esp_read(eregs->esp_intrpt);
-
- ESPDATA(("ir %x ... ", esp->ireg));
-
- if (hmuch == 0)
- ESPDATA(("done! \n"));
-
-#if 0
- local_irq_restore(flags);
-#endif
-
- /* check new bus phase */
- if (newphase != oldphase && i < esp->current_transfer_size) {
- /* something happened; disconnect ?? */
- ESPDATA(("phase change, dropped out with %d done ... ", i));
- break;
- }
-
- /* check int. status */
- if (esp->ireg & ESP_INTR_DC) {
- /* disconnect */
- ESPDATA(("disconnect; %d transferred ... ", i));
- break;
- } else if (esp->ireg & ESP_INTR_FDONE) {
- /* function done */
- ESPDATA(("function done; %d transferred ... ", i));
- break;
- }
-
- /* XXX fixme: bail out on stall */
- if (fifo_stuck > 10) {
- /* we're stuck */
- ESPDATA(("fifo stall; %d transferred ... ", i));
- break;
- }
- }
-
- ESPDATA(("\n"));
- /* check successful completion ?? */
-
- if (thisphase == in_dataout)
- hmuch += fifocnt; /* stuck?? adjust data pointer ...*/
-
- /* tell do_data_finale how much was transferred */
- esp->current_transfer_size -= hmuch;
-
- /* still not completely sure on this one ... */
- return /*do_intr_end*/ do_work_bus /*do_phase_determine*/ ;
-
- /*
- * end PIO
- */
- }
- return do_intr_end;
-}
-
-/* See how successful the data transfer was. */
-static int esp_do_data_finale(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- Scsi_Cmnd *SCptr = esp->current_SC;
- struct esp_device *esp_dev = SCptr->device->hostdata;
- int bogus_data = 0, bytes_sent = 0, fifocnt, ecount = 0;
-
- if(esp->dma_led_off)
- esp->dma_led_off(esp);
-
- ESPDATA(("esp_do_data_finale: "));
-
- if(SCptr->SCp.phase == in_datain) {
- if(esp->sreg & ESP_STAT_PERR) {
- /* Yuck, parity error. The ESP asserts ATN
- * so that we can go to message out phase
- * immediately and inform the target that
- * something bad happened.
- */
- ESPLOG(("esp%d: data bad parity detected.\n",
- esp->esp_id));
- esp->cur_msgout[0] = INITIATOR_ERROR;
- esp->msgout_len = 1;
- }
- if(esp->dma_drain)
- esp->dma_drain(esp);
- }
- if(esp->dma_invalidate)
- esp->dma_invalidate(esp);
-
- /* This could happen for the above parity error case. */
- if(!(esp->ireg == ESP_INTR_BSERV)) {
- /* Please go to msgout phase, please please please... */
- ESPLOG(("esp%d: !BSERV after data, probably to msgout\n",
- esp->esp_id));
- return esp_do_phase_determine(esp, eregs);
- }
-
- /* Check for partial transfers and other horrible events. */
- fifocnt = (esp_read(eregs->esp_fflags) & ESP_FF_FBYTES);
- ecount = esp_getcount(eregs);
- if(esp->fas_premature_intr_workaround)
- ecount -= 0x40;
- bytes_sent = esp->current_transfer_size;
-
- ESPDATA(("trans_sz=%d, ", bytes_sent));
- if(!(esp->sreg & ESP_STAT_TCNT))
- bytes_sent -= ecount;
- if(SCptr->SCp.phase == in_dataout)
- bytes_sent -= fifocnt;
-
- ESPDATA(("bytes_sent=%d (ecount=%d, fifocnt=%d), ", bytes_sent,
- ecount, fifocnt));
-
- /* If we were in synchronous mode, check for peculiarities. */
- if(esp_dev->sync_max_offset)
- bogus_data = esp100_sync_hwbug(esp, eregs, SCptr, fifocnt);
- else
- esp_cmd(esp, eregs, ESP_CMD_FLUSH);
-
- /* Until we are sure of what has happened, we are certainly
- * in the dark.
- */
- esp_advance_phase(SCptr, in_the_dark);
-
- /* Check for premature interrupt condition. Can happen on FAS2x6
- * chips. QLogic recommends a workaround by overprogramming the
- * transfer counters, but this makes doing scatter-gather impossible.
- * Until there is a way to disable scatter-gather for a single target,
- * and not only for the entire host adapter as it is now, the workaround
- * is way to expensive performance wise.
- * Instead, it turns out that when this happens the target has disconnected
- * already but it doesn't show in the interrupt register. Compensate for
- * that here to try and avoid a SCSI bus reset.
- */
- if(!esp->fas_premature_intr_workaround && (fifocnt == 1) &&
- sreg_dataoutp(esp->sreg)) {
- ESPLOG(("esp%d: Premature interrupt, enabling workaround\n",
- esp->esp_id));
-#if 0
- /* Disable scatter-gather operations, they are not possible
- * when using this workaround.
- */
- esp->ehost->sg_tablesize = 0;
- esp->ehost->use_clustering = ENABLE_CLUSTERING;
- esp->fas_premature_intr_workaround = 1;
- bytes_sent = 0;
- if(SCptr->use_sg) {
- ESPLOG(("esp%d: Aborting scatter-gather operation\n",
- esp->esp_id));
- esp->cur_msgout[0] = ABORT;
- esp->msgout_len = 1;
- esp->msgout_ctr = 0;
- esp_cmd(esp, eregs, ESP_CMD_SATN);
- esp_setcount(eregs, 0xffff);
- esp_cmd(esp, eregs, ESP_CMD_NULL);
- esp_cmd(esp, eregs, ESP_CMD_TPAD | ESP_CMD_DMA);
- return do_intr_end;
- }
-#else
- /* Just set the disconnected bit. That's what appears to
- * happen anyway. The state machine will pick it up when
- * we return.
- */
- esp->ireg |= ESP_INTR_DC;
-#endif
- }
-
- if(bytes_sent < 0) {
- /* I've seen this happen due to lost state in this
- * driver. No idea why it happened, but allowing
- * this value to be negative caused things to
- * lock up. This allows greater chance of recovery.
- * In fact every time I've seen this, it has been
- * a driver bug without question.
- */
- ESPLOG(("esp%d: yieee, bytes_sent < 0!\n", esp->esp_id));
- ESPLOG(("esp%d: csz=%d fifocount=%d ecount=%d\n",
- esp->esp_id,
- esp->current_transfer_size, fifocnt, ecount));
- ESPLOG(("esp%d: use_sg=%d ptr=%p this_residual=%d\n",
- esp->esp_id,
- SCptr->use_sg, SCptr->SCp.ptr, SCptr->SCp.this_residual));
- ESPLOG(("esp%d: Forcing async for target %d\n", esp->esp_id,
- SCptr->device->id));
- SCptr->device->borken = 1;
- esp_dev->sync = 0;
- bytes_sent = 0;
- }
-
- /* Update the state of our transfer. */
- SCptr->SCp.ptr += bytes_sent;
- SCptr->SCp.this_residual -= bytes_sent;
- if(SCptr->SCp.this_residual < 0) {
- /* shit */
- ESPLOG(("esp%d: Data transfer overrun.\n", esp->esp_id));
- SCptr->SCp.this_residual = 0;
- }
-
- /* Maybe continue. */
- if(!bogus_data) {
- ESPDATA(("!bogus_data, "));
- /* NO MATTER WHAT, we advance the scatterlist,
- * if the target should decide to disconnect
- * in between scatter chunks (which is common)
- * we could die horribly! I used to have the sg
- * advance occur only if we are going back into
- * (or are staying in) a data phase, you can
- * imagine the hell I went through trying to
- * figure this out.
- */
- if(!SCptr->SCp.this_residual && SCptr->SCp.buffers_residual)
- advance_sg(esp, SCptr);
-#ifdef DEBUG_ESP_DATA
- if(sreg_datainp(esp->sreg) || sreg_dataoutp(esp->sreg)) {
- ESPDATA(("to more data\n"));
- } else {
- ESPDATA(("to new phase\n"));
- }
-#endif
- return esp_do_phase_determine(esp, eregs);
- }
- /* Bogus data, just wait for next interrupt. */
- ESPLOG(("esp%d: bogus_data during end of data phase\n",
- esp->esp_id));
- return do_intr_end;
-}
-
-/* We received a non-good status return at the end of
- * running a SCSI command. This is used to decide if
- * we should clear our synchronous transfer state for
- * such a device when that happens.
- *
- * The idea is that when spinning up a disk or rewinding
- * a tape, we don't want to go into a loop re-negotiating
- * synchronous capabilities over and over.
- */
-static int esp_should_clear_sync(Scsi_Cmnd *sp)
-{
- unchar cmd = sp->cmnd[0];
-
- /* These cases are for spinning up a disk and
- * waiting for that spinup to complete.
- */
- if(cmd == START_STOP)
- return 0;
-
- if(cmd == TEST_UNIT_READY)
- return 0;
-
- /* One more special case for SCSI tape drives,
- * this is what is used to probe the device for
- * completion of a rewind or tape load operation.
- */
- if(sp->device->type == TYPE_TAPE && cmd == MODE_SENSE)
- return 0;
-
- return 1;
-}
-
-/* Either a command is completing or a target is dropping off the bus
- * to continue the command in the background so we can do other work.
- */
-static int esp_do_freebus(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- Scsi_Cmnd *SCptr = esp->current_SC;
- int rval;
-
- rval = skipahead2(esp, eregs, SCptr, in_status, in_msgindone, in_freeing);
- if(rval)
- return rval;
-
- if(esp->ireg != ESP_INTR_DC) {
- ESPLOG(("esp%d: Target will not disconnect\n", esp->esp_id));
- return do_reset_bus; /* target will not drop BSY... */
- }
- esp->msgout_len = 0;
- esp->prevmsgout = NOP;
- if(esp->prevmsgin == COMMAND_COMPLETE) {
- struct esp_device *esp_dev = SCptr->device->hostdata;
- /* Normal end of nexus. */
- if(esp->disconnected_SC)
- esp_cmd(esp, eregs, ESP_CMD_ESEL);
-
- if(SCptr->SCp.Status != GOOD &&
- SCptr->SCp.Status != CONDITION_GOOD &&
- ((1<targets_present) &&
- esp_dev->sync && esp_dev->sync_max_offset) {
- /* SCSI standard says that the synchronous capabilities
- * should be renegotiated at this point. Most likely
- * we are about to request sense from this target
- * in which case we want to avoid using sync
- * transfers until we are sure of the current target
- * state.
- */
- ESPMISC(("esp: Status <%d> for target %d lun %d\n",
- SCptr->SCp.Status, SCptr->device->id, SCptr->device->lun));
-
- /* But don't do this when spinning up a disk at
- * boot time while we poll for completion as it
- * fills up the console with messages. Also, tapes
- * can report not ready many times right after
- * loading up a tape.
- */
- if(esp_should_clear_sync(SCptr) != 0)
- esp_dev->sync = 0;
- }
- ESPDISC(("F<%02x,%02x>", SCptr->device->id, SCptr->device->lun));
- esp_done(esp, ((SCptr->SCp.Status & 0xff) |
- ((SCptr->SCp.Message & 0xff)<<8) |
- (DID_OK << 16)));
- } else if(esp->prevmsgin == DISCONNECT) {
- /* Normal disconnect. */
- esp_cmd(esp, eregs, ESP_CMD_ESEL);
- ESPDISC(("D<%02x,%02x>", SCptr->device->id, SCptr->device->lun));
- append_SC(&esp->disconnected_SC, SCptr);
- esp->current_SC = NULL;
- if(esp->issue_SC)
- esp_exec_cmd(esp);
- } else {
- /* Driver bug, we do not expect a disconnect here
- * and should not have advanced the state engine
- * to in_freeing.
- */
- ESPLOG(("esp%d: last msg not disc and not cmd cmplt.\n",
- esp->esp_id));
- return do_reset_bus;
- }
- return do_intr_end;
-}
-
-/* When a reselect occurs, and we cannot find the command to
- * reconnect to in our queues, we do this.
- */
-static int esp_bad_reconnect(struct NCR_ESP *esp)
-{
- Scsi_Cmnd *sp;
-
- ESPLOG(("esp%d: Eieeee, reconnecting unknown command!\n",
- esp->esp_id));
- ESPLOG(("QUEUE DUMP\n"));
- sp = esp->issue_SC;
- ESPLOG(("esp%d: issue_SC[", esp->esp_id));
- while(sp) {
- ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun));
- sp = (Scsi_Cmnd *) sp->host_scribble;
- }
- ESPLOG(("]\n"));
- sp = esp->current_SC;
- ESPLOG(("esp%d: current_SC[", esp->esp_id));
- while(sp) {
- ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun));
- sp = (Scsi_Cmnd *) sp->host_scribble;
- }
- ESPLOG(("]\n"));
- sp = esp->disconnected_SC;
- ESPLOG(("esp%d: disconnected_SC[", esp->esp_id));
- while(sp) {
- ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun));
- sp = (Scsi_Cmnd *) sp->host_scribble;
- }
- ESPLOG(("]\n"));
- return do_reset_bus;
-}
-
-/* Do the needy when a target tries to reconnect to us. */
-static int esp_do_reconnect(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- int lun, target;
- Scsi_Cmnd *SCptr;
-
- /* Check for all bogus conditions first. */
- target = reconnect_target(esp, eregs);
- if(target < 0) {
- ESPDISC(("bad bus bits\n"));
- return do_reset_bus;
- }
- lun = reconnect_lun(esp, eregs);
- if(lun < 0) {
- ESPDISC(("target=%2x, bad identify msg\n", target));
- return do_reset_bus;
- }
-
- /* Things look ok... */
- ESPDISC(("R<%02x,%02x>", target, lun));
-
- esp_cmd(esp, eregs, ESP_CMD_FLUSH);
- if(esp100_reconnect_hwbug(esp, eregs))
- return do_reset_bus;
- esp_cmd(esp, eregs, ESP_CMD_NULL);
-
- SCptr = remove_SC(&esp->disconnected_SC, (unchar) target, (unchar) lun);
- if(!SCptr)
- return esp_bad_reconnect(esp);
-
- esp_connect(esp, eregs, SCptr);
- esp_cmd(esp, eregs, ESP_CMD_MOK);
-
- /* Reconnect implies a restore pointers operation. */
- esp_restore_pointers(esp, SCptr);
-
- esp->snip = 0;
- esp_advance_phase(SCptr, in_the_dark);
- return do_intr_end;
-}
-
-/* End of NEXUS (hopefully), pick up status + message byte then leave if
- * all goes well.
- */
-static int esp_do_status(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- Scsi_Cmnd *SCptr = esp->current_SC;
- int intr, rval;
-
- rval = skipahead1(esp, eregs, SCptr, in_the_dark, in_status);
- if(rval)
- return rval;
-
- intr = esp->ireg;
- ESPSTAT(("esp_do_status: "));
- if(intr != ESP_INTR_DC) {
- int message_out = 0; /* for parity problems */
-
- /* Ack the message. */
- ESPSTAT(("ack msg, "));
- esp_cmd(esp, eregs, ESP_CMD_MOK);
-
- if(esp->dma_poll)
- esp->dma_poll(esp, (unsigned char *) esp->esp_command);
-
- ESPSTAT(("got something, "));
- /* ESP chimes in with one of
- *
- * 1) function done interrupt:
- * both status and message in bytes
- * are available
- *
- * 2) bus service interrupt:
- * only status byte was acquired
- *
- * 3) Anything else:
- * can't happen, but we test for it
- * anyways
- *
- * ALSO: If bad parity was detected on either
- * the status _or_ the message byte then
- * the ESP has asserted ATN on the bus
- * and we must therefore wait for the
- * next phase change.
- */
- if(intr & ESP_INTR_FDONE) {
- /* We got it all, hallejulia. */
- ESPSTAT(("got both, "));
- SCptr->SCp.Status = esp->esp_command[0];
- SCptr->SCp.Message = esp->esp_command[1];
- esp->prevmsgin = SCptr->SCp.Message;
- esp->cur_msgin[0] = SCptr->SCp.Message;
- if(esp->sreg & ESP_STAT_PERR) {
- /* There was bad parity for the
- * message byte, the status byte
- * was ok.
- */
- message_out = MSG_PARITY_ERROR;
- }
- } else if(intr == ESP_INTR_BSERV) {
- /* Only got status byte. */
- ESPLOG(("esp%d: got status only, ", esp->esp_id));
- if(!(esp->sreg & ESP_STAT_PERR)) {
- SCptr->SCp.Status = esp->esp_command[0];
- SCptr->SCp.Message = 0xff;
- } else {
- /* The status byte had bad parity.
- * we leave the scsi_pointer Status
- * field alone as we set it to a default
- * of CHECK_CONDITION in esp_queue.
- */
- message_out = INITIATOR_ERROR;
- }
- } else {
- /* This shouldn't happen ever. */
- ESPSTAT(("got bolixed\n"));
- esp_advance_phase(SCptr, in_the_dark);
- return esp_do_phase_determine(esp, eregs);
- }
-
- if(!message_out) {
- ESPSTAT(("status=%2x msg=%2x, ", SCptr->SCp.Status,
- SCptr->SCp.Message));
- if(SCptr->SCp.Message == COMMAND_COMPLETE) {
- ESPSTAT(("and was COMMAND_COMPLETE\n"));
- esp_advance_phase(SCptr, in_freeing);
- return esp_do_freebus(esp, eregs);
- } else {
- ESPLOG(("esp%d: and _not_ COMMAND_COMPLETE\n",
- esp->esp_id));
- esp->msgin_len = esp->msgin_ctr = 1;
- esp_advance_phase(SCptr, in_msgindone);
- return esp_do_msgindone(esp, eregs);
- }
- } else {
- /* With luck we'll be able to let the target
- * know that bad parity happened, it will know
- * which byte caused the problems and send it
- * again. For the case where the status byte
- * receives bad parity, I do not believe most
- * targets recover very well. We'll see.
- */
- ESPLOG(("esp%d: bad parity somewhere mout=%2x\n",
- esp->esp_id, message_out));
- esp->cur_msgout[0] = message_out;
- esp->msgout_len = esp->msgout_ctr = 1;
- esp_advance_phase(SCptr, in_the_dark);
- return esp_do_phase_determine(esp, eregs);
- }
- } else {
- /* If we disconnect now, all hell breaks loose. */
- ESPLOG(("esp%d: whoops, disconnect\n", esp->esp_id));
- esp_advance_phase(SCptr, in_the_dark);
- return esp_do_phase_determine(esp, eregs);
- }
-}
-
-static int esp_enter_status(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- unchar thecmd = ESP_CMD_ICCSEQ;
-
- esp_cmd(esp, eregs, ESP_CMD_FLUSH);
-
- if(esp->do_pio_cmds) {
- esp_advance_phase(esp->current_SC, in_status);
- esp_cmd(esp, eregs, thecmd);
- while(!(esp_read(esp->eregs->esp_status) & ESP_STAT_INTR));
- esp->esp_command[0] = esp_read(eregs->esp_fdata);
- while(!(esp_read(esp->eregs->esp_status) & ESP_STAT_INTR));
- esp->esp_command[1] = esp_read(eregs->esp_fdata);
- } else {
- esp->esp_command[0] = esp->esp_command[1] = 0xff;
- esp_write(eregs->esp_tclow, 2);
- esp_write(eregs->esp_tcmed, 0);
- esp->dma_init_read(esp, esp->esp_command_dvma, 2);
- thecmd |= ESP_CMD_DMA;
- esp_cmd(esp, eregs, thecmd);
- esp_advance_phase(esp->current_SC, in_status);
- }
-
- return esp_do_status(esp, eregs);
-}
-
-static int esp_disconnect_amidst_phases(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- Scsi_Cmnd *sp = esp->current_SC;
- struct esp_device *esp_dev = sp->device->hostdata;
-
- /* This means real problems if we see this
- * here. Unless we were actually trying
- * to force the device to abort/reset.
- */
- ESPLOG(("esp%d: Disconnect amidst phases, ", esp->esp_id));
- ESPLOG(("pphase<%s> cphase<%s>, ",
- phase_string(sp->SCp.phase),
- phase_string(sp->SCp.sent_command)));
-
- if(esp->disconnected_SC)
- esp_cmd(esp, eregs, ESP_CMD_ESEL);
-
- switch(esp->cur_msgout[0]) {
- default:
- /* We didn't expect this to happen at all. */
- ESPLOG(("device is bolixed\n"));
- esp_advance_phase(sp, in_tgterror);
- esp_done(esp, (DID_ERROR << 16));
- break;
-
- case BUS_DEVICE_RESET:
- ESPLOG(("device reset successful\n"));
- esp_dev->sync_max_offset = 0;
- esp_dev->sync_min_period = 0;
- esp_dev->sync = 0;
- esp_advance_phase(sp, in_resetdev);
- esp_done(esp, (DID_RESET << 16));
- break;
-
- case ABORT:
- ESPLOG(("device abort successful\n"));
- esp_advance_phase(sp, in_abortone);
- esp_done(esp, (DID_ABORT << 16));
- break;
-
- };
- return do_intr_end;
-}
-
-static int esp_enter_msgout(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- esp_advance_phase(esp->current_SC, in_msgout);
- return esp_do_msgout(esp, eregs);
-}
-
-static int esp_enter_msgin(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- esp_advance_phase(esp->current_SC, in_msgin);
- return esp_do_msgin(esp, eregs);
-}
-
-static int esp_enter_cmd(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- esp_advance_phase(esp->current_SC, in_cmdbegin);
- return esp_do_cmdbegin(esp, eregs);
-}
-
-static int esp_enter_badphase(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- ESPLOG(("esp%d: Bizarre bus phase %2x.\n", esp->esp_id,
- esp->sreg & ESP_STAT_PMASK));
- return do_reset_bus;
-}
-
-typedef int (*espfunc_t)(struct NCR_ESP *,
- struct ESP_regs *);
-
-static espfunc_t phase_vector[] = {
- esp_do_data, /* ESP_DOP */
- esp_do_data, /* ESP_DIP */
- esp_enter_cmd, /* ESP_CMDP */
- esp_enter_status, /* ESP_STATP */
- esp_enter_badphase, /* ESP_STAT_PMSG */
- esp_enter_badphase, /* ESP_STAT_PMSG | ESP_STAT_PIO */
- esp_enter_msgout, /* ESP_MOP */
- esp_enter_msgin, /* ESP_MIP */
-};
-
-/* The target has control of the bus and we have to see where it has
- * taken us.
- */
-static int esp_do_phase_determine(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- if ((esp->ireg & ESP_INTR_DC) != 0)
- return esp_disconnect_amidst_phases(esp, eregs);
- return phase_vector[esp->sreg & ESP_STAT_PMASK](esp, eregs);
-}
-
-/* First interrupt after exec'ing a cmd comes here. */
-static int esp_select_complete(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- Scsi_Cmnd *SCptr = esp->current_SC;
- struct esp_device *esp_dev = SCptr->device->hostdata;
- int cmd_bytes_sent, fcnt;
-
- fcnt = (esp_read(eregs->esp_fflags) & ESP_FF_FBYTES);
- cmd_bytes_sent = esp->dma_bytes_sent(esp, fcnt);
- if(esp->dma_invalidate)
- esp->dma_invalidate(esp);
-
- /* Let's check to see if a reselect happened
- * while we we're trying to select. This must
- * be checked first.
- */
- if(esp->ireg == (ESP_INTR_RSEL | ESP_INTR_FDONE)) {
- esp_reconnect(esp, SCptr);
- return esp_do_reconnect(esp, eregs);
- }
-
- /* Looks like things worked, we should see a bus service &
- * a function complete interrupt at this point. Note we
- * are doing a direct comparison because we don't want to
- * be fooled into thinking selection was successful if
- * ESP_INTR_DC is set, see below.
- */
- if(esp->ireg == (ESP_INTR_FDONE | ESP_INTR_BSERV)) {
- /* target speaks... */
- esp->targets_present |= (1<snip)
- esp_dev->sync = 1;
-
- /* See how far, if at all, we got in getting
- * the information out to the target.
- */
- switch(esp->seqreg) {
- default:
-
- case ESP_STEP_ASEL:
- /* Arbitration won, target selected, but
- * we are in some phase which is not command
- * phase nor is it message out phase.
- *
- * XXX We've confused the target, obviously.
- * XXX So clear it's state, but we also end
- * XXX up clearing everyone elses. That isn't
- * XXX so nice. I'd like to just reset this
- * XXX target, but if I cannot even get it's
- * XXX attention and finish selection to talk
- * XXX to it, there is not much more I can do.
- * XXX If we have a loaded bus we're going to
- * XXX spend the next second or so renegotiating
- * XXX for synchronous transfers.
- */
- ESPLOG(("esp%d: STEP_ASEL for tgt %d\n",
- esp->esp_id, SCptr->device->id));
-
- case ESP_STEP_SID:
- /* Arbitration won, target selected, went
- * to message out phase, sent one message
- * byte, then we stopped. ATN is asserted
- * on the SCSI bus and the target is still
- * there hanging on. This is a legal
- * sequence step if we gave the ESP a select
- * and stop command.
- *
- * XXX See above, I could set the borken flag
- * XXX in the device struct and retry the
- * XXX command. But would that help for
- * XXX tagged capable targets?
- */
-
- case ESP_STEP_NCMD:
- /* Arbitration won, target selected, maybe
- * sent the one message byte in message out
- * phase, but we did not go to command phase
- * in the end. Actually, we could have sent
- * only some of the message bytes if we tried
- * to send out the entire identify and tag
- * message using ESP_CMD_SA3.
- */
- cmd_bytes_sent = 0;
- break;
-
- case ESP_STEP_PPC:
- /* No, not the powerPC pinhead. Arbitration
- * won, all message bytes sent if we went to
- * message out phase, went to command phase
- * but only part of the command was sent.
- *
- * XXX I've seen this, but usually in conjunction
- * XXX with a gross error which appears to have
- * XXX occurred between the time I told the
- * XXX ESP to arbitrate and when I got the
- * XXX interrupt. Could I have misloaded the
- * XXX command bytes into the fifo? Actually,
- * XXX I most likely missed a phase, and therefore
- * XXX went into never never land and didn't even
- * XXX know it. That was the old driver though.
- * XXX What is even more peculiar is that the ESP
- * XXX showed the proper function complete and
- * XXX bus service bits in the interrupt register.
- */
-
- case ESP_STEP_FINI4:
- case ESP_STEP_FINI5:
- case ESP_STEP_FINI6:
- case ESP_STEP_FINI7:
- /* Account for the identify message */
- if(SCptr->SCp.phase == in_slct_norm)
- cmd_bytes_sent -= 1;
- };
- esp_cmd(esp, eregs, ESP_CMD_NULL);
-
- /* Be careful, we could really get fucked during synchronous
- * data transfers if we try to flush the fifo now.
- */
- if(!fcnt && /* Fifo is empty and... */
- /* either we are not doing synchronous transfers or... */
- (!esp_dev->sync_max_offset ||
- /* We are not going into data in phase. */
- ((esp->sreg & ESP_STAT_PMASK) != ESP_DIP)))
- esp_cmd(esp, eregs, ESP_CMD_FLUSH); /* flush is safe */
-
- /* See how far we got if this is not a slow command. */
- if(!esp->esp_slowcmd) {
- if(cmd_bytes_sent < 0)
- cmd_bytes_sent = 0;
- if(cmd_bytes_sent != SCptr->cmd_len) {
- /* Crapola, mark it as a slowcmd
- * so that we have some chance of
- * keeping the command alive with
- * good luck.
- *
- * XXX Actually, if we didn't send it all
- * XXX this means either we didn't set things
- * XXX up properly (driver bug) or the target
- * XXX or the ESP detected parity on one of
- * XXX the command bytes. This makes much
- * XXX more sense, and therefore this code
- * XXX should be changed to send out a
- * XXX parity error message or if the status
- * XXX register shows no parity error then
- * XXX just expect the target to bring the
- * XXX bus into message in phase so that it
- * XXX can send us the parity error message.
- * XXX SCSI sucks...
- */
- esp->esp_slowcmd = 1;
- esp->esp_scmdp = &(SCptr->cmnd[cmd_bytes_sent]);
- esp->esp_scmdleft = (SCptr->cmd_len - cmd_bytes_sent);
- }
- }
-
- /* Now figure out where we went. */
- esp_advance_phase(SCptr, in_the_dark);
- return esp_do_phase_determine(esp, eregs);
- }
-
- /* Did the target even make it? */
- if(esp->ireg == ESP_INTR_DC) {
- /* wheee... nobody there or they didn't like
- * what we told it to do, clean up.
- */
-
- /* If anyone is off the bus, but working on
- * a command in the background for us, tell
- * the ESP to listen for them.
- */
- if(esp->disconnected_SC)
- esp_cmd(esp, eregs, ESP_CMD_ESEL);
-
- if(((1<device->id) & esp->targets_present) &&
- esp->seqreg && esp->cur_msgout[0] == EXTENDED_MESSAGE &&
- (SCptr->SCp.phase == in_slct_msg ||
- SCptr->SCp.phase == in_slct_stop)) {
- /* shit */
- esp->snip = 0;
- ESPLOG(("esp%d: Failed synchronous negotiation for target %d "
- "lun %d\n", esp->esp_id, SCptr->device->id, SCptr->device->lun));
- esp_dev->sync_max_offset = 0;
- esp_dev->sync_min_period = 0;
- esp_dev->sync = 1; /* so we don't negotiate again */
-
- /* Run the command again, this time though we
- * won't try to negotiate for synchronous transfers.
- *
- * XXX I'd like to do something like send an
- * XXX INITIATOR_ERROR or ABORT message to the
- * XXX target to tell it, "Sorry I confused you,
- * XXX please come back and I will be nicer next
- * XXX time". But that requires having the target
- * XXX on the bus, and it has dropped BSY on us.
- */
- esp->current_SC = NULL;
- esp_advance_phase(SCptr, not_issued);
- prepend_SC(&esp->issue_SC, SCptr);
- esp_exec_cmd(esp);
- return do_intr_end;
- }
-
- /* Ok, this is normal, this is what we see during boot
- * or whenever when we are scanning the bus for targets.
- * But first make sure that is really what is happening.
- */
- if(((1<device->id) & esp->targets_present)) {
- ESPLOG(("esp%d: Warning, live target %d not responding to "
- "selection.\n", esp->esp_id, SCptr->device->id));
-
- /* This _CAN_ happen. The SCSI standard states that
- * the target is to _not_ respond to selection if
- * _it_ detects bad parity on the bus for any reason.
- * Therefore, we assume that if we've talked successfully
- * to this target before, bad parity is the problem.
- */
- esp_done(esp, (DID_PARITY << 16));
- } else {
- /* Else, there really isn't anyone there. */
- ESPMISC(("esp: selection failure, maybe nobody there?\n"));
- ESPMISC(("esp: target %d lun %d\n",
- SCptr->device->id, SCptr->device->lun));
- esp_done(esp, (DID_BAD_TARGET << 16));
- }
- return do_intr_end;
- }
-
-
- ESPLOG(("esp%d: Selection failure.\n", esp->esp_id));
- printk("esp%d: Currently -- ", esp->esp_id);
- esp_print_ireg(esp->ireg);
- printk(" ");
- esp_print_statreg(esp->sreg);
- printk(" ");
- esp_print_seqreg(esp->seqreg);
- printk("\n");
- printk("esp%d: New -- ", esp->esp_id);
- esp->sreg = esp_read(eregs->esp_status);
- esp->seqreg = esp_read(eregs->esp_sstep);
- esp->ireg = esp_read(eregs->esp_intrpt);
- esp_print_ireg(esp->ireg);
- printk(" ");
- esp_print_statreg(esp->sreg);
- printk(" ");
- esp_print_seqreg(esp->seqreg);
- printk("\n");
- ESPLOG(("esp%d: resetting bus\n", esp->esp_id));
- return do_reset_bus; /* ugh... */
-}
-
-/* Continue reading bytes for msgin phase. */
-static int esp_do_msgincont(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- if(esp->ireg & ESP_INTR_BSERV) {
- /* in the right phase too? */
- if((esp->sreg & ESP_STAT_PMASK) == ESP_MIP) {
- /* phew... */
- esp_cmd(esp, eregs, ESP_CMD_TI);
- esp_advance_phase(esp->current_SC, in_msgindone);
- return do_intr_end;
- }
-
- /* We changed phase but ESP shows bus service,
- * in this case it is most likely that we, the
- * hacker who has been up for 20hrs straight
- * staring at the screen, drowned in coffee
- * smelling like retched cigarette ashes
- * have miscoded something..... so, try to
- * recover as best we can.
- */
- ESPLOG(("esp%d: message in mis-carriage.\n", esp->esp_id));
- }
- esp_advance_phase(esp->current_SC, in_the_dark);
- return do_phase_determine;
-}
-
-static int check_singlebyte_msg(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- esp->prevmsgin = esp->cur_msgin[0];
- if(esp->cur_msgin[0] & 0x80) {
- /* wheee... */
- ESPLOG(("esp%d: target sends identify amidst phases\n",
- esp->esp_id));
- esp_advance_phase(esp->current_SC, in_the_dark);
- return 0;
- } else if(((esp->cur_msgin[0] & 0xf0) == 0x20) ||
- (esp->cur_msgin[0] == EXTENDED_MESSAGE)) {
- esp->msgin_len = 2;
- esp_advance_phase(esp->current_SC, in_msgincont);
- return 0;
- }
- esp_advance_phase(esp->current_SC, in_the_dark);
- switch(esp->cur_msgin[0]) {
- default:
- /* We don't want to hear about it. */
- ESPLOG(("esp%d: msg %02x which we don't know about\n", esp->esp_id,
- esp->cur_msgin[0]));
- return MESSAGE_REJECT;
-
- case NOP:
- ESPLOG(("esp%d: target %d sends a nop\n", esp->esp_id,
- esp->current_SC->device->id));
- return 0;
-
- case RESTORE_POINTERS:
- /* In this case we might also have to backup the
- * "slow command" pointer. It is rare to get such
- * a save/restore pointer sequence so early in the
- * bus transition sequences, but cover it.
- */
- if(esp->esp_slowcmd) {
- esp->esp_scmdleft = esp->current_SC->cmd_len;
- esp->esp_scmdp = &esp->current_SC->cmnd[0];
- }
- esp_restore_pointers(esp, esp->current_SC);
- return 0;
-
- case SAVE_POINTERS:
- esp_save_pointers(esp, esp->current_SC);
- return 0;
-
- case COMMAND_COMPLETE:
- case DISCONNECT:
- /* Freeing the bus, let it go. */
- esp->current_SC->SCp.phase = in_freeing;
- return 0;
-
- case MESSAGE_REJECT:
- ESPMISC(("msg reject, "));
- if(esp->prevmsgout == EXTENDED_MESSAGE) {
- struct esp_device *esp_dev = esp->current_SC->device->hostdata;
-
- /* Doesn't look like this target can
- * do synchronous or WIDE transfers.
- */
- ESPSDTR(("got reject, was trying nego, clearing sync/WIDE\n"));
- esp_dev->sync = 1;
- esp_dev->wide = 1;
- esp_dev->sync_min_period = 0;
- esp_dev->sync_max_offset = 0;
- return 0;
- } else {
- ESPMISC(("not sync nego, sending ABORT\n"));
- return ABORT;
- }
- };
-}
-
-/* Target negotiates for synchronous transfers before we do, this
- * is legal although very strange. What is even funnier is that
- * the SCSI2 standard specifically recommends against targets doing
- * this because so many initiators cannot cope with this occurring.
- */
-static int target_with_ants_in_pants(struct NCR_ESP *esp,
- Scsi_Cmnd *SCptr,
- struct esp_device *esp_dev)
-{
- if(esp_dev->sync || SCptr->device->borken) {
- /* sorry, no can do */
- ESPSDTR(("forcing to async, "));
- build_sync_nego_msg(esp, 0, 0);
- esp_dev->sync = 1;
- esp->snip = 1;
- ESPLOG(("esp%d: hoping for msgout\n", esp->esp_id));
- esp_advance_phase(SCptr, in_the_dark);
- return EXTENDED_MESSAGE;
- }
-
- /* Ok, we'll check them out... */
- return 0;
-}
-
-static void sync_report(struct NCR_ESP *esp)
-{
- int msg3, msg4;
- char *type;
-
- msg3 = esp->cur_msgin[3];
- msg4 = esp->cur_msgin[4];
- if(msg4) {
- int hz = 1000000000 / (msg3 * 4);
- int integer = hz / 1000000;
- int fraction = (hz - (integer * 1000000)) / 10000;
- if((msg3 * 4) < 200) {
- type = "FAST";
- } else {
- type = "synchronous";
- }
-
- /* Do not transform this back into one big printk
- * again, it triggers a bug in our sparc64-gcc272
- * sibling call optimization. -DaveM
- */
- ESPLOG((KERN_INFO "esp%d: target %d ",
- esp->esp_id, esp->current_SC->device->id));
- ESPLOG(("[period %dns offset %d %d.%02dMHz ",
- (int) msg3 * 4, (int) msg4,
- integer, fraction));
- ESPLOG(("%s SCSI%s]\n", type,
- (((msg3 * 4) < 200) ? "-II" : "")));
- } else {
- ESPLOG((KERN_INFO "esp%d: target %d asynchronous\n",
- esp->esp_id, esp->current_SC->device->id));
- }
-}
-
-static int check_multibyte_msg(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- Scsi_Cmnd *SCptr = esp->current_SC;
- struct esp_device *esp_dev = SCptr->device->hostdata;
- unchar regval = 0;
- int message_out = 0;
-
- ESPSDTR(("chk multibyte msg: "));
- if(esp->cur_msgin[2] == EXTENDED_SDTR) {
- int period = esp->cur_msgin[3];
- int offset = esp->cur_msgin[4];
-
- ESPSDTR(("is sync nego response, "));
- if(!esp->snip) {
- int rval;
-
- /* Target negotiates first! */
- ESPSDTR(("target jumps the gun, "));
- message_out = EXTENDED_MESSAGE; /* we must respond */
- rval = target_with_ants_in_pants(esp, SCptr, esp_dev);
- if(rval)
- return rval;
- }
-
- ESPSDTR(("examining sdtr, "));
-
- /* Offset cannot be larger than ESP fifo size. */
- if(offset > 15) {
- ESPSDTR(("offset too big %2x, ", offset));
- offset = 15;
- ESPSDTR(("sending back new offset\n"));
- build_sync_nego_msg(esp, period, offset);
- return EXTENDED_MESSAGE;
- }
-
- if(offset && period > esp->max_period) {
- /* Yeee, async for this slow device. */
- ESPSDTR(("period too long %2x, ", period));
- build_sync_nego_msg(esp, 0, 0);
- ESPSDTR(("hoping for msgout\n"));
- esp_advance_phase(esp->current_SC, in_the_dark);
- return EXTENDED_MESSAGE;
- } else if (offset && period < esp->min_period) {
- ESPSDTR(("period too short %2x, ", period));
- period = esp->min_period;
- if(esp->erev > esp236)
- regval = 4;
- else
- regval = 5;
- } else if(offset) {
- int tmp;
-
- ESPSDTR(("period is ok, "));
- tmp = esp->ccycle / 1000;
- regval = (((period << 2) + tmp - 1) / tmp);
- if(regval && (esp->erev > esp236)) {
- if(period >= 50)
- regval--;
- }
- }
-
- if(offset) {
- unchar bit;
-
- esp_dev->sync_min_period = (regval & 0x1f);
- esp_dev->sync_max_offset = (offset | esp->radelay);
- if(esp->erev > esp236) {
- if(esp->erev == fas100a)
- bit = ESP_CONFIG3_FAST;
- else
- bit = ESP_CONFIG3_FSCSI;
- if(period < 50)
- esp->config3[SCptr->device->id] |= bit;
- else
- esp->config3[SCptr->device->id] &= ~bit;
- esp->prev_cfg3 = esp->config3[SCptr->device->id];
- esp_write(eregs->esp_cfg3, esp->prev_cfg3);
- }
- esp->prev_soff = esp_dev->sync_min_period;
- esp_write(eregs->esp_soff, esp->prev_soff);
- esp->prev_stp = esp_dev->sync_max_offset;
- esp_write(eregs->esp_stp, esp->prev_stp);
-
- ESPSDTR(("soff=%2x stp=%2x cfg3=%2x\n",
- esp_dev->sync_max_offset,
- esp_dev->sync_min_period,
- esp->config3[scmd_id(SCptr)]));
-
- esp->snip = 0;
- } else if(esp_dev->sync_max_offset) {
- unchar bit;
-
- /* back to async mode */
- ESPSDTR(("unaccaptable sync nego, forcing async\n"));
- esp_dev->sync_max_offset = 0;
- esp_dev->sync_min_period = 0;
- esp->prev_soff = 0;
- esp_write(eregs->esp_soff, 0);
- esp->prev_stp = 0;
- esp_write(eregs->esp_stp, 0);
- if(esp->erev > esp236) {
- if(esp->erev == fas100a)
- bit = ESP_CONFIG3_FAST;
- else
- bit = ESP_CONFIG3_FSCSI;
- esp->config3[SCptr->device->id] &= ~bit;
- esp->prev_cfg3 = esp->config3[SCptr->device->id];
- esp_write(eregs->esp_cfg3, esp->prev_cfg3);
- }
- }
-
- sync_report(esp);
-
- ESPSDTR(("chk multibyte msg: sync is known, "));
- esp_dev->sync = 1;
-
- if(message_out) {
- ESPLOG(("esp%d: sending sdtr back, hoping for msgout\n",
- esp->esp_id));
- build_sync_nego_msg(esp, period, offset);
- esp_advance_phase(SCptr, in_the_dark);
- return EXTENDED_MESSAGE;
- }
-
- ESPSDTR(("returning zero\n"));
- esp_advance_phase(SCptr, in_the_dark); /* ...or else! */
- return 0;
- } else if(esp->cur_msgin[2] == EXTENDED_WDTR) {
- ESPLOG(("esp%d: AIEEE wide msg received\n", esp->esp_id));
- message_out = MESSAGE_REJECT;
- } else if(esp->cur_msgin[2] == EXTENDED_MODIFY_DATA_POINTER) {
- ESPLOG(("esp%d: rejecting modify data ptr msg\n", esp->esp_id));
- message_out = MESSAGE_REJECT;
- }
- esp_advance_phase(SCptr, in_the_dark);
- return message_out;
-}
-
-static int esp_do_msgindone(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- Scsi_Cmnd *SCptr = esp->current_SC;
- int message_out = 0, it = 0, rval;
-
- rval = skipahead1(esp, eregs, SCptr, in_msgin, in_msgindone);
- if(rval)
- return rval;
- if(SCptr->SCp.sent_command != in_status) {
- if(!(esp->ireg & ESP_INTR_DC)) {
- if(esp->msgin_len && (esp->sreg & ESP_STAT_PERR)) {
- message_out = MSG_PARITY_ERROR;
- esp_cmd(esp, eregs, ESP_CMD_FLUSH);
- } else if((it = (esp_read(eregs->esp_fflags) & ESP_FF_FBYTES))!=1) {
- /* We certainly dropped the ball somewhere. */
- message_out = INITIATOR_ERROR;
- esp_cmd(esp, eregs, ESP_CMD_FLUSH);
- } else if(!esp->msgin_len) {
- it = esp_read(eregs->esp_fdata);
- esp_advance_phase(SCptr, in_msgincont);
- } else {
- /* it is ok and we want it */
- it = esp->cur_msgin[esp->msgin_ctr] =
- esp_read(eregs->esp_fdata);
- esp->msgin_ctr++;
- }
- } else {
- esp_advance_phase(SCptr, in_the_dark);
- return do_work_bus;
- }
- } else {
- it = esp->cur_msgin[0];
- }
- if(!message_out && esp->msgin_len) {
- if(esp->msgin_ctr < esp->msgin_len) {
- esp_advance_phase(SCptr, in_msgincont);
- } else if(esp->msgin_len == 1) {
- message_out = check_singlebyte_msg(esp, eregs);
- } else if(esp->msgin_len == 2) {
- if(esp->cur_msgin[0] == EXTENDED_MESSAGE) {
- if((it+2) >= 15) {
- message_out = MESSAGE_REJECT;
- } else {
- esp->msgin_len = (it + 2);
- esp_advance_phase(SCptr, in_msgincont);
- }
- } else {
- message_out = MESSAGE_REJECT; /* foo on you */
- }
- } else {
- message_out = check_multibyte_msg(esp, eregs);
- }
- }
- if(message_out < 0) {
- return -message_out;
- } else if(message_out) {
- if(((message_out != 1) &&
- ((message_out < 0x20) || (message_out & 0x80))))
- esp->msgout_len = 1;
- esp->cur_msgout[0] = message_out;
- esp_cmd(esp, eregs, ESP_CMD_SATN);
- esp_advance_phase(SCptr, in_the_dark);
- esp->msgin_len = 0;
- }
- esp->sreg = esp_read(eregs->esp_status);
- esp->sreg &= ~(ESP_STAT_INTR);
- if((esp->sreg & (ESP_STAT_PMSG|ESP_STAT_PCD)) == (ESP_STAT_PMSG|ESP_STAT_PCD))
- esp_cmd(esp, eregs, ESP_CMD_MOK);
- if((SCptr->SCp.sent_command == in_msgindone) &&
- (SCptr->SCp.phase == in_freeing))
- return esp_do_freebus(esp, eregs);
- return do_intr_end;
-}
-
-static int esp_do_cmdbegin(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- unsigned char tmp;
- Scsi_Cmnd *SCptr = esp->current_SC;
-
- esp_advance_phase(SCptr, in_cmdend);
- esp_cmd(esp, eregs, ESP_CMD_FLUSH);
- tmp = *esp->esp_scmdp++;
- esp->esp_scmdleft--;
- esp_write(eregs->esp_fdata, tmp);
- esp_cmd(esp, eregs, ESP_CMD_TI);
- return do_intr_end;
-}
-
-static int esp_do_cmddone(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- esp_cmd(esp, eregs, ESP_CMD_NULL);
- if(esp->ireg & ESP_INTR_BSERV) {
- esp_advance_phase(esp->current_SC, in_the_dark);
- return esp_do_phase_determine(esp, eregs);
- }
- ESPLOG(("esp%d: in do_cmddone() but didn't get BSERV interrupt.\n",
- esp->esp_id));
- return do_reset_bus;
-}
-
-static int esp_do_msgout(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- esp_cmd(esp, eregs, ESP_CMD_FLUSH);
- switch(esp->msgout_len) {
- case 1:
- esp_write(eregs->esp_fdata, esp->cur_msgout[0]);
- esp_cmd(esp, eregs, ESP_CMD_TI);
- break;
-
- case 2:
- if(esp->do_pio_cmds){
- esp_write(eregs->esp_fdata, esp->cur_msgout[0]);
- esp_write(eregs->esp_fdata, esp->cur_msgout[1]);
- esp_cmd(esp, eregs, ESP_CMD_TI);
- } else {
- esp->esp_command[0] = esp->cur_msgout[0];
- esp->esp_command[1] = esp->cur_msgout[1];
- esp->dma_setup(esp, esp->esp_command_dvma, 2, 0);
- esp_setcount(eregs, 2);
- esp_cmd(esp, eregs, ESP_CMD_DMA | ESP_CMD_TI);
- }
- break;
-
- case 4:
- esp->snip = 1;
- if(esp->do_pio_cmds){
- esp_write(eregs->esp_fdata, esp->cur_msgout[0]);
- esp_write(eregs->esp_fdata, esp->cur_msgout[1]);
- esp_write(eregs->esp_fdata, esp->cur_msgout[2]);
- esp_write(eregs->esp_fdata, esp->cur_msgout[3]);
- esp_cmd(esp, eregs, ESP_CMD_TI);
- } else {
- esp->esp_command[0] = esp->cur_msgout[0];
- esp->esp_command[1] = esp->cur_msgout[1];
- esp->esp_command[2] = esp->cur_msgout[2];
- esp->esp_command[3] = esp->cur_msgout[3];
- esp->dma_setup(esp, esp->esp_command_dvma, 4, 0);
- esp_setcount(eregs, 4);
- esp_cmd(esp, eregs, ESP_CMD_DMA | ESP_CMD_TI);
- }
- break;
-
- case 5:
- esp->snip = 1;
- if(esp->do_pio_cmds){
- esp_write(eregs->esp_fdata, esp->cur_msgout[0]);
- esp_write(eregs->esp_fdata, esp->cur_msgout[1]);
- esp_write(eregs->esp_fdata, esp->cur_msgout[2]);
- esp_write(eregs->esp_fdata, esp->cur_msgout[3]);
- esp_write(eregs->esp_fdata, esp->cur_msgout[4]);
- esp_cmd(esp, eregs, ESP_CMD_TI);
- } else {
- esp->esp_command[0] = esp->cur_msgout[0];
- esp->esp_command[1] = esp->cur_msgout[1];
- esp->esp_command[2] = esp->cur_msgout[2];
- esp->esp_command[3] = esp->cur_msgout[3];
- esp->esp_command[4] = esp->cur_msgout[4];
- esp->dma_setup(esp, esp->esp_command_dvma, 5, 0);
- esp_setcount(eregs, 5);
- esp_cmd(esp, eregs, ESP_CMD_DMA | ESP_CMD_TI);
- }
- break;
-
- default:
- /* whoops */
- ESPMISC(("bogus msgout sending NOP\n"));
- esp->cur_msgout[0] = NOP;
- esp_write(eregs->esp_fdata, esp->cur_msgout[0]);
- esp->msgout_len = 1;
- esp_cmd(esp, eregs, ESP_CMD_TI);
- break;
- }
- esp_advance_phase(esp->current_SC, in_msgoutdone);
- return do_intr_end;
-}
-
-static int esp_do_msgoutdone(struct NCR_ESP *esp,
- struct ESP_regs *eregs)
-{
- if((esp->msgout_len > 1) && esp->dma_barrier)
- esp->dma_barrier(esp);
-
- if(!(esp->ireg & ESP_INTR_DC)) {
- esp_cmd(esp, eregs, ESP_CMD_NULL);
- switch(esp->sreg & ESP_STAT_PMASK) {
- case ESP_MOP:
- /* whoops, parity error */
- ESPLOG(("esp%d: still in msgout, parity error assumed\n",
- esp->esp_id));
- if(esp->msgout_len > 1)
- esp_cmd(esp, eregs, ESP_CMD_SATN);
- esp_advance_phase(esp->current_SC, in_msgout);
- return do_work_bus;
-
- case ESP_DIP:
- break;
-
- default:
- if(!fcount(esp, eregs) &&
- !(((struct esp_device *)esp->current_SC->device->hostdata)->sync_max_offset))
- esp_cmd(esp, eregs, ESP_CMD_FLUSH);
- break;
-
- };
- }
-
- /* If we sent out a synchronous negotiation message, update
- * our state.
- */
- if(esp->cur_msgout[2] == EXTENDED_MESSAGE &&
- esp->cur_msgout[4] == EXTENDED_SDTR) {
- esp->snip = 1; /* anal retentiveness... */
- }
-
- esp->prevmsgout = esp->cur_msgout[0];
- esp->msgout_len = 0;
- esp_advance_phase(esp->current_SC, in_the_dark);
- return esp_do_phase_determine(esp, eregs);
-}
-
-static int esp_bus_unexpected(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- ESPLOG(("esp%d: command in weird state %2x\n",
- esp->esp_id, esp->current_SC->SCp.phase));
- return do_reset_bus;
-}
-
-static espfunc_t bus_vector[] = {
- esp_do_data_finale,
- esp_do_data_finale,
- esp_bus_unexpected,
- esp_do_msgin,
- esp_do_msgincont,
- esp_do_msgindone,
- esp_do_msgout,
- esp_do_msgoutdone,
- esp_do_cmdbegin,
- esp_do_cmddone,
- esp_do_status,
- esp_do_freebus,
- esp_do_phase_determine,
- esp_bus_unexpected,
- esp_bus_unexpected,
- esp_bus_unexpected,
-};
-
-/* This is the second tier in our dual-level SCSI state machine. */
-static int esp_work_bus(struct NCR_ESP *esp, struct ESP_regs *eregs)
-{
- Scsi_Cmnd *SCptr = esp->current_SC;
- unsigned int phase;
-
- ESPBUS(("esp_work_bus: "));
- if(!SCptr) {
- ESPBUS(("reconnect\n"));
- return esp_do_reconnect(esp, eregs);
- }
- phase = SCptr->SCp.phase;
- if ((phase & 0xf0) == in_phases_mask)
- return bus_vector[(phase & 0x0f)](esp, eregs);
- else if((phase & 0xf0) == in_slct_mask)
- return esp_select_complete(esp, eregs);
- else
- return esp_bus_unexpected(esp, eregs);
-}
-
-static espfunc_t isvc_vector[] = {
- NULL,
- esp_do_phase_determine,
- esp_do_resetbus,
- esp_finish_reset,
- esp_work_bus
-};
-
-/* Main interrupt handler for an esp adapter. */
-void esp_handle(struct NCR_ESP *esp)
-{
- struct ESP_regs *eregs;
- Scsi_Cmnd *SCptr;
- int what_next = do_intr_end;
- eregs = esp->eregs;
- SCptr = esp->current_SC;
-
- if(esp->dma_irq_entry)
- esp->dma_irq_entry(esp);
-
- /* Check for errors. */
- esp->sreg = esp_read(eregs->esp_status);
- esp->sreg &= (~ESP_STAT_INTR);
- esp->seqreg = (esp_read(eregs->esp_sstep) & ESP_STEP_VBITS);
- esp->ireg = esp_read(eregs->esp_intrpt); /* Unlatch intr and stat regs */
- ESPIRQ(("handle_irq: [sreg<%02x> sstep<%02x> ireg<%02x>]\n",
- esp->sreg, esp->seqreg, esp->ireg));
- if(esp->sreg & (ESP_STAT_SPAM)) {
- /* Gross error, could be due to one of:
- *
- * - top of fifo overwritten, could be because
- * we tried to do a synchronous transfer with
- * an offset greater than ESP fifo size
- *
- * - top of command register overwritten
- *
- * - DMA setup to go in one direction, SCSI
- * bus points in the other, whoops
- *
- * - weird phase change during asynchronous
- * data phase while we are initiator
- */
- ESPLOG(("esp%d: Gross error sreg=%2x\n", esp->esp_id, esp->sreg));
-
- /* If a command is live on the bus we cannot safely
- * reset the bus, so we'll just let the pieces fall
- * where they may. Here we are hoping that the
- * target will be able to cleanly go away soon
- * so we can safely reset things.
- */
- if(!SCptr) {
- ESPLOG(("esp%d: No current cmd during gross error, "
- "resetting bus\n", esp->esp_id));
- what_next = do_reset_bus;
- goto state_machine;
- }
- }
-
- /* No current cmd is only valid at this point when there are
- * commands off the bus or we are trying a reset.
- */
- if(!SCptr && !esp->disconnected_SC && !(esp->ireg & ESP_INTR_SR)) {
- /* Panic is safe, since current_SC is null. */
- ESPLOG(("esp%d: no command in esp_handle()\n", esp->esp_id));
- panic("esp_handle: current_SC == penguin within interrupt!");
- }
-
- if(esp->ireg & (ESP_INTR_IC)) {
- /* Illegal command fed to ESP. Outside of obvious
- * software bugs that could cause this, there is
- * a condition with ESP100 where we can confuse the
- * ESP into an erroneous illegal command interrupt
- * because it does not scrape the FIFO properly
- * for reselection. See esp100_reconnect_hwbug()
- * to see how we try very hard to avoid this.
- */
- ESPLOG(("esp%d: invalid command\n", esp->esp_id));
-
- esp_dump_state(esp, eregs);
-
- if(SCptr) {
- /* Devices with very buggy firmware can drop BSY
- * during a scatter list interrupt when using sync
- * mode transfers. We continue the transfer as
- * expected, the target drops the bus, the ESP
- * gets confused, and we get a illegal command
- * interrupt because the bus is in the disconnected
- * state now and ESP_CMD_TI is only allowed when
- * a nexus is alive on the bus.
- */
- ESPLOG(("esp%d: Forcing async and disabling disconnect for "
- "target %d\n", esp->esp_id, SCptr->device->id));
- SCptr->device->borken = 1; /* foo on you */
- }
-
- what_next = do_reset_bus;
- } else if(!(esp->ireg & ~(ESP_INTR_FDONE | ESP_INTR_BSERV | ESP_INTR_DC))) {
- int phase;
-
- if(SCptr) {
- phase = SCptr->SCp.phase;
- if(phase & in_phases_mask) {
- what_next = esp_work_bus(esp, eregs);
- } else if(phase & in_slct_mask) {
- what_next = esp_select_complete(esp, eregs);
- } else {
- ESPLOG(("esp%d: interrupt for no good reason...\n",
- esp->esp_id));
- what_next = do_intr_end;
- }
- } else {
- ESPLOG(("esp%d: BSERV or FDONE or DC while SCptr==NULL\n",
- esp->esp_id));
- what_next = do_reset_bus;
- }
- } else if(esp->ireg & ESP_INTR_SR) {
- ESPLOG(("esp%d: SCSI bus reset interrupt\n", esp->esp_id));
- what_next = do_reset_complete;
- } else if(esp->ireg & (ESP_INTR_S | ESP_INTR_SATN)) {
- ESPLOG(("esp%d: AIEEE we have been selected by another initiator!\n",
- esp->esp_id));
- what_next = do_reset_bus;
- } else if(esp->ireg & ESP_INTR_RSEL) {
- if(!SCptr) {
- /* This is ok. */
- what_next = esp_do_reconnect(esp, eregs);
- } else if(SCptr->SCp.phase & in_slct_mask) {
- /* Only selection code knows how to clean
- * up properly.
- */
- ESPDISC(("Reselected during selection attempt\n"));
- what_next = esp_select_complete(esp, eregs);
- } else {
- ESPLOG(("esp%d: Reselected while bus is busy\n",
- esp->esp_id));
- what_next = do_reset_bus;
- }
- }
-
- /* This is tier-one in our dual level SCSI state machine. */
-state_machine:
- while(what_next != do_intr_end) {
- if (what_next >= do_phase_determine &&
- what_next < do_intr_end)
- what_next = isvc_vector[what_next](esp, eregs);
- else {
- /* state is completely lost ;-( */
- ESPLOG(("esp%d: interrupt engine loses state, resetting bus\n",
- esp->esp_id));
- what_next = do_reset_bus;
- }
- }
- if(esp->dma_irq_exit)
- esp->dma_irq_exit(esp);
-}
-EXPORT_SYMBOL(esp_handle);
-
-#ifndef CONFIG_SMP
-irqreturn_t esp_intr(int irq, void *dev_id)
-{
- struct NCR_ESP *esp;
- unsigned long flags;
- int again;
- struct Scsi_Host *dev = dev_id;
-
- /* Handle all ESP interrupts showing at this IRQ level. */
- spin_lock_irqsave(dev->host_lock, flags);
-repeat:
- again = 0;
- for_each_esp(esp) {
-#ifndef __mips__
- if(((esp)->irq & 0xff) == irq) {
-#endif
- if(esp->dma_irq_p(esp)) {
- again = 1;
-
- esp->dma_ints_off(esp);
-
- ESPIRQ(("I%d(", esp->esp_id));
- esp_handle(esp);
- ESPIRQ((")"));
-
- esp->dma_ints_on(esp);
- }
-#ifndef __mips__
- }
-#endif
- }
- if(again)
- goto repeat;
- spin_unlock_irqrestore(dev->host_lock, flags);
- return IRQ_HANDLED;
-}
-#else
-/* For SMP we only service one ESP on the list list at our IRQ level! */
-irqreturn_t esp_intr(int irq, void *dev_id)
-{
- struct NCR_ESP *esp;
- unsigned long flags;
- struct Scsi_Host *dev = dev_id;
-
- /* Handle all ESP interrupts showing at this IRQ level. */
- spin_lock_irqsave(dev->host_lock, flags);
- for_each_esp(esp) {
- if(((esp)->irq & 0xf) == irq) {
- if(esp->dma_irq_p(esp)) {
- esp->dma_ints_off(esp);
-
- ESPIRQ(("I[%d:%d](",
- smp_processor_id(), esp->esp_id));
- esp_handle(esp);
- ESPIRQ((")"));
-
- esp->dma_ints_on(esp);
- goto out;
- }
- }
- }
-out:
- spin_unlock_irqrestore(dev->host_lock, flags);
- return IRQ_HANDLED;
-}
-#endif
-
-int esp_slave_alloc(struct scsi_device *SDptr)
-{
- struct esp_device *esp_dev =
- kzalloc(sizeof(struct esp_device), GFP_ATOMIC);
-
- if (!esp_dev)
- return -ENOMEM;
- SDptr->hostdata = esp_dev;
- return 0;
-}
-
-void esp_slave_destroy(struct scsi_device *SDptr)
-{
- struct NCR_ESP *esp = (struct NCR_ESP *) SDptr->host->hostdata;
-
- esp->targets_present &= ~(1 << sdev_id(SDptr));
- kfree(SDptr->hostdata);
- SDptr->hostdata = NULL;
-}
-
-#ifdef MODULE
-int init_module(void) { return 0; }
-void cleanup_module(void) {}
-void esp_release(void)
-{
- esps_in_use--;
- esps_running = esps_in_use;
-}
-EXPORT_SYMBOL(esp_release);
-#endif
-
-EXPORT_SYMBOL(esp_abort);
-EXPORT_SYMBOL(esp_allocate);
-EXPORT_SYMBOL(esp_deallocate);
-EXPORT_SYMBOL(esp_initialize);
-EXPORT_SYMBOL(esp_intr);
-EXPORT_SYMBOL(esp_queue);
-EXPORT_SYMBOL(esp_reset);
-EXPORT_SYMBOL(esp_slave_alloc);
-EXPORT_SYMBOL(esp_slave_destroy);
-EXPORT_SYMBOL(esps_in_use);
-
-MODULE_LICENSE("GPL");
diff --git a/trunk/drivers/scsi/NCR53C9x.h b/trunk/drivers/scsi/NCR53C9x.h
deleted file mode 100644
index 00a0ba040dba..000000000000
--- a/trunk/drivers/scsi/NCR53C9x.h
+++ /dev/null
@@ -1,668 +0,0 @@
-/* NCR53C9x.c: Defines and structures for the NCR53C9x generic driver.
- *
- * Originally esp.h: Defines and structures for the Sparc ESP
- * (Enhanced SCSI Processor) driver under Linux.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *
- * Generalization by Jesper Skov (jskov@cygnus.co.uk)
- *
- * More generalization (for i386 stuff) by Tymm Twillman (tymm@computer.org)
- */
-
-#ifndef NCR53C9X_H
-#define NCR53C9X_H
-
-#include
-
-/* djweis for mac driver */
-#if defined(CONFIG_MAC)
-#define PAD_SIZE 15
-#else
-#define PAD_SIZE 3
-#endif
-
-/* Handle multiple hostadapters on Amiga
- * generally PAD_SIZE = 3
- * but there is one exception: Oktagon (PAD_SIZE = 1) */
-#if defined(CONFIG_OKTAGON_SCSI) || defined(CONFIG_OKTAGON_SCSI_MODULE)
-#undef PAD_SIZE
-#if defined(CONFIG_BLZ1230_SCSI) || defined(CONFIG_BLZ1230_SCSI_MODULE) || \
- defined(CONFIG_BLZ2060_SCSI) || defined(CONFIG_BLZ2060_SCSI_MODULE) || \
- defined(CONFIG_CYBERSTORM_SCSI) || defined(CONFIG_CYBERSTORM_SCSI_MODULE) || \
- defined(CONFIG_CYBERSTORMII_SCSI) || defined(CONFIG_CYBERSTORMII_SCSI_MODULE) || \
- defined(CONFIG_FASTLANE_SCSI) || defined(CONFIG_FASTLANE_SCSI_MODULE)
-#define MULTIPLE_PAD_SIZES
-#else
-#define PAD_SIZE 1
-#endif
-#endif
-
-/* Macros for debugging messages */
-
-#define DEBUG_ESP
-/* #define DEBUG_ESP_DATA */
-/* #define DEBUG_ESP_QUEUE */
-/* #define DEBUG_ESP_DISCONNECT */
-/* #define DEBUG_ESP_STATUS */
-/* #define DEBUG_ESP_PHASES */
-/* #define DEBUG_ESP_WORKBUS */
-/* #define DEBUG_STATE_MACHINE */
-/* #define DEBUG_ESP_CMDS */
-/* #define DEBUG_ESP_IRQS */
-/* #define DEBUG_SDTR */
-/* #define DEBUG_ESP_SG */
-
-/* Use the following to sprinkle debugging messages in a way which
- * suits you if combinations of the above become too verbose when
- * trying to track down a specific problem.
- */
-/* #define DEBUG_ESP_MISC */
-
-#if defined(DEBUG_ESP)
-#define ESPLOG(foo) printk foo
-#else
-#define ESPLOG(foo)
-#endif /* (DEBUG_ESP) */
-
-#if defined(DEBUG_ESP_DATA)
-#define ESPDATA(foo) printk foo
-#else
-#define ESPDATA(foo)
-#endif
-
-#if defined(DEBUG_ESP_QUEUE)
-#define ESPQUEUE(foo) printk foo
-#else
-#define ESPQUEUE(foo)
-#endif
-
-#if defined(DEBUG_ESP_DISCONNECT)
-#define ESPDISC(foo) printk foo
-#else
-#define ESPDISC(foo)
-#endif
-
-#if defined(DEBUG_ESP_STATUS)
-#define ESPSTAT(foo) printk foo
-#else
-#define ESPSTAT(foo)
-#endif
-
-#if defined(DEBUG_ESP_PHASES)
-#define ESPPHASE(foo) printk foo
-#else
-#define ESPPHASE(foo)
-#endif
-
-#if defined(DEBUG_ESP_WORKBUS)
-#define ESPBUS(foo) printk foo
-#else
-#define ESPBUS(foo)
-#endif
-
-#if defined(DEBUG_ESP_IRQS)
-#define ESPIRQ(foo) printk foo
-#else
-#define ESPIRQ(foo)
-#endif
-
-#if defined(DEBUG_SDTR)
-#define ESPSDTR(foo) printk foo
-#else
-#define ESPSDTR(foo)
-#endif
-
-#if defined(DEBUG_ESP_MISC)
-#define ESPMISC(foo) printk foo
-#else
-#define ESPMISC(foo)
-#endif
-
-/*
- * padding for register structure
- */
-#ifdef CONFIG_JAZZ_ESP
-#define EREGS_PAD(n)
-#else
-#ifndef MULTIPLE_PAD_SIZES
-#define EREGS_PAD(n) unchar n[PAD_SIZE];
-#endif
-#endif
-
-/* The ESP SCSI controllers have their register sets in three
- * "classes":
- *
- * 1) Registers which are both read and write.
- * 2) Registers which are read only.
- * 3) Registers which are write only.
- *
- * Yet, they all live within the same IO space.
- */
-
-#if !defined(__i386__) && !defined(__x86_64__)
-
-#ifndef MULTIPLE_PAD_SIZES
-
-#ifdef CONFIG_CPU_HAS_WB
-#include
-#define esp_write(__reg, __val) do{(__reg) = (__val); wbflush();} while(0)
-#else
-#define esp_write(__reg, __val) ((__reg) = (__val))
-#endif
-#define esp_read(__reg) (__reg)
-
-struct ESP_regs {
- /* Access Description Offset */
- volatile unchar esp_tclow; /* rw Low bits of the transfer count 0x00 */
- EREGS_PAD(tlpad1);
- volatile unchar esp_tcmed; /* rw Mid bits of the transfer count 0x04 */
- EREGS_PAD(fdpad);
- volatile unchar esp_fdata; /* rw FIFO data bits 0x08 */
- EREGS_PAD(cbpad);
- volatile unchar esp_cmnd; /* rw SCSI command bits 0x0c */
- EREGS_PAD(stpad);
- volatile unchar esp_status; /* ro ESP status register 0x10 */
-#define esp_busid esp_status /* wo Bus ID for select/reselect 0x10 */
- EREGS_PAD(irqpd);
- volatile unchar esp_intrpt; /* ro Kind of interrupt 0x14 */
-#define esp_timeo esp_intrpt /* wo Timeout value for select/resel 0x14 */
- EREGS_PAD(sspad);
- volatile unchar esp_sstep; /* ro Sequence step register 0x18 */
-#define esp_stp esp_sstep /* wo Transfer period per sync 0x18 */
- EREGS_PAD(ffpad);
- volatile unchar esp_fflags; /* ro Bits of current FIFO info 0x1c */
-#define esp_soff esp_fflags /* wo Sync offset 0x1c */
- EREGS_PAD(cf1pd);
- volatile unchar esp_cfg1; /* rw First configuration register 0x20 */
- EREGS_PAD(cfpad);
- volatile unchar esp_cfact; /* wo Clock conversion factor 0x24 */
- EREGS_PAD(ctpad);
- volatile unchar esp_ctest; /* wo Chip test register 0x28 */
- EREGS_PAD(cf2pd);
- volatile unchar esp_cfg2; /* rw Second configuration register 0x2c */
- EREGS_PAD(cf3pd);
-
- /* The following is only found on the 53C9X series SCSI chips */
- volatile unchar esp_cfg3; /* rw Third configuration register 0x30 */
- EREGS_PAD(cf4pd);
- volatile unchar esp_cfg4; /* rw Fourth configuration register 0x34 */
- EREGS_PAD(thpd);
- /* The following is found on all chips except the NCR53C90 (ESP100) */
- volatile unchar esp_tchi; /* rw High bits of transfer count 0x38 */
-#define esp_uid esp_tchi /* ro Unique ID code 0x38 */
- EREGS_PAD(fgpad);
- volatile unchar esp_fgrnd; /* rw Data base for fifo 0x3c */
-};
-
-#else /* MULTIPLE_PAD_SIZES */
-
-#define esp_write(__reg, __val) (*(__reg) = (__val))
-#define esp_read(__reg) (*(__reg))
-
-struct ESP_regs {
- unsigned char io_addr[64]; /* dummy */
- /* Access Description Offset */
-#define esp_tclow io_addr /* rw Low bits of the transfer count 0x00 */
-#define esp_tcmed io_addr + (1<<(esp->shift)) /* rw Mid bits of the transfer count 0x04 */
-#define esp_fdata io_addr + (2<<(esp->shift)) /* rw FIFO data bits 0x08 */
-#define esp_cmnd io_addr + (3<<(esp->shift)) /* rw SCSI command bits 0x0c */
-#define esp_status io_addr + (4<<(esp->shift)) /* ro ESP status register 0x10 */
-#define esp_busid esp_status /* wo Bus ID for select/reselect 0x10 */
-#define esp_intrpt io_addr + (5<<(esp->shift)) /* ro Kind of interrupt 0x14 */
-#define esp_timeo esp_intrpt /* wo Timeout value for select/resel 0x14 */
-#define esp_sstep io_addr + (6<<(esp->shift)) /* ro Sequence step register 0x18 */
-#define esp_stp esp_sstep /* wo Transfer period per sync 0x18 */
-#define esp_fflags io_addr + (7<<(esp->shift)) /* ro Bits of current FIFO info 0x1c */
-#define esp_soff esp_fflags /* wo Sync offset 0x1c */
-#define esp_cfg1 io_addr + (8<<(esp->shift)) /* rw First configuration register 0x20 */
-#define esp_cfact io_addr + (9<<(esp->shift)) /* wo Clock conversion factor 0x24 */
-#define esp_ctest io_addr + (10<<(esp->shift)) /* wo Chip test register 0x28 */
-#define esp_cfg2 io_addr + (11<<(esp->shift)) /* rw Second configuration register 0x2c */
-
- /* The following is only found on the 53C9X series SCSI chips */
-#define esp_cfg3 io_addr + (12<<(esp->shift)) /* rw Third configuration register 0x30 */
-#define esp_cfg4 io_addr + (13<<(esp->shift)) /* rw Fourth configuration register 0x34 */
-
- /* The following is found on all chips except the NCR53C90 (ESP100) */
-#define esp_tchi io_addr + (14<<(esp->shift)) /* rw High bits of transfer count 0x38 */
-#define esp_uid esp_tchi /* ro Unique ID code 0x38 */
-#define esp_fgrnd io_addr + (15<<(esp->shift)) /* rw Data base for fifo 0x3c */
-};
-
-#endif
-
-#else /* !defined(__i386__) && !defined(__x86_64__) */
-
-#define esp_write(__reg, __val) outb((__val), (__reg))
-#define esp_read(__reg) inb((__reg))
-
-struct ESP_regs {
- unsigned int io_addr;
- /* Access Description Offset */
-#define esp_tclow io_addr /* rw Low bits of the transfer count 0x00 */
-#define esp_tcmed io_addr + 1 /* rw Mid bits of the transfer count 0x04 */
-#define esp_fdata io_addr + 2 /* rw FIFO data bits 0x08 */
-#define esp_cmnd io_addr + 3 /* rw SCSI command bits 0x0c */
-#define esp_status io_addr + 4 /* ro ESP status register 0x10 */
-#define esp_busid esp_status /* wo Bus ID for select/reselect 0x10 */
-#define esp_intrpt io_addr + 5 /* ro Kind of interrupt 0x14 */
-#define esp_timeo esp_intrpt /* wo Timeout value for select/resel 0x14 */
-#define esp_sstep io_addr + 6 /* ro Sequence step register 0x18 */
-#define esp_stp esp_sstep /* wo Transfer period per sync 0x18 */
-#define esp_fflags io_addr + 7 /* ro Bits of current FIFO info 0x1c */
-#define esp_soff esp_fflags /* wo Sync offset 0x1c */
-#define esp_cfg1 io_addr + 8 /* rw First configuration register 0x20 */
-#define esp_cfact io_addr + 9 /* wo Clock conversion factor 0x24 */
-#define esp_ctest io_addr + 10 /* wo Chip test register 0x28 */
-#define esp_cfg2 io_addr + 11 /* rw Second configuration register 0x2c */
-
- /* The following is only found on the 53C9X series SCSI chips */
-#define esp_cfg3 io_addr + 12 /* rw Third configuration register 0x30 */
-#define esp_cfg4 io_addr + 13 /* rw Fourth configuration register 0x34 */
-
- /* The following is found on all chips except the NCR53C90 (ESP100) */
-#define esp_tchi io_addr + 14 /* rw High bits of transfer count 0x38 */
-#define esp_uid esp_tchi /* ro Unique ID code 0x38 */
-#define esp_fgrnd io_addr + 15 /* rw Data base for fifo 0x3c */
-};
-
-#endif /* !defined(__i386__) && !defined(__x86_64__) */
-
-/* Various revisions of the ESP board. */
-enum esp_rev {
- esp100 = 0x00, /* NCR53C90 - very broken */
- esp100a = 0x01, /* NCR53C90A */
- esp236 = 0x02,
- fas236 = 0x03,
- fas100a = 0x04,
- fast = 0x05,
- fas366 = 0x06,
- fas216 = 0x07,
- fsc = 0x08, /* SYM53C94-2 */
- espunknown = 0x09
-};
-
-/* We allocate one of these for each scsi device and attach it to
- * SDptr->hostdata for use in the driver
- */
-struct esp_device {
- unsigned char sync_min_period;
- unsigned char sync_max_offset;
- unsigned sync:1;
- unsigned wide:1;
- unsigned disconnect:1;
-};
-
-/* We get one of these for each ESP probed. */
-struct NCR_ESP {
- struct NCR_ESP *next; /* Next ESP on probed or NULL */
- struct ESP_regs *eregs; /* All esp registers */
- int dma; /* Who I do transfers with. */
- void *dregs; /* And his registers. */
- struct Scsi_Host *ehost; /* Backpointer to SCSI Host */
-
- void *edev; /* Pointer to controller base/SBus */
- int esp_id; /* Unique per-ESP ID number */
-
- /* ESP Configuration Registers */
- unsigned char config1; /* Copy of the 1st config register */
- unsigned char config2; /* Copy of the 2nd config register */
- unsigned char config3[16]; /* Copy of the 3rd config register */
-
- /* The current command we are sending to the ESP chip. This esp_command
- * ptr needs to be mapped in DVMA area so we can send commands and read
- * from the ESP fifo without burning precious CPU cycles. Programmed I/O
- * sucks when we have the DVMA to do it for us. The ESP is stupid and will
- * only send out 6, 10, and 12 byte SCSI commands, others we need to send
- * one byte at a time. esp_slowcmd being set says that we are doing one
- * of the command types ESP doesn't understand, esp_scmdp keeps track of
- * which byte we are sending, esp_scmdleft says how many bytes to go.
- */
- volatile unchar *esp_command; /* Location of command (CPU view) */
- __u32 esp_command_dvma; /* Location of command (DVMA view) */
- unsigned char esp_clen; /* Length of this command */
- unsigned char esp_slowcmd;
- unsigned char *esp_scmdp;
- unsigned char esp_scmdleft;
-
- /* The following are used to determine the cause of an IRQ. Upon every
- * IRQ entry we synchronize these with the hardware registers.
- */
- unchar ireg; /* Copy of ESP interrupt register */
- unchar sreg; /* Same for ESP status register */
- unchar seqreg; /* The ESP sequence register */
-
- /* The following is set when a premature interrupt condition is detected
- * in some FAS revisions.
- */
- unchar fas_premature_intr_workaround;
-
- /* To save register writes to the ESP, which can be expensive, we
- * keep track of the previous value that various registers had for
- * the last target we connected to. If they are the same for the
- * current target, we skip the register writes as they are not needed.
- */
- unchar prev_soff, prev_stp, prev_cfg3;
-
- /* For each target we keep track of save/restore data
- * pointer information. This needs to be updated majorly
- * when we add support for tagged queueing. -DaveM
- */
- struct esp_pointers {
- char *saved_ptr;
- struct scatterlist *saved_buffer;
- int saved_this_residual;
- int saved_buffers_residual;
- } data_pointers[16] /*XXX [MAX_TAGS_PER_TARGET]*/;
-
- /* Clock periods, frequencies, synchronization, etc. */
- unsigned int cfreq; /* Clock frequency in HZ */
- unsigned int cfact; /* Clock conversion factor */
- unsigned int ccycle; /* One ESP clock cycle */
- unsigned int ctick; /* One ESP clock time */
- unsigned int radelay; /* FAST chip req/ack delay */
- unsigned int neg_defp; /* Default negotiation period */
- unsigned int sync_defp; /* Default sync transfer period */
- unsigned int max_period; /* longest our period can be */
- unsigned int min_period; /* shortest period we can withstand */
- /* For slow to medium speed input clock rates we shoot for 5mb/s,
- * but for high input clock rates we try to do 10mb/s although I
- * don't think a transfer can even run that fast with an ESP even
- * with DMA2 scatter gather pipelining.
- */
-#define SYNC_DEFP_SLOW 0x32 /* 5mb/s */
-#define SYNC_DEFP_FAST 0x19 /* 10mb/s */
-
- unsigned int snip; /* Sync. negotiation in progress */
- unsigned int wnip; /* WIDE negotiation in progress */
- unsigned int targets_present; /* targets spoken to before */
-
- int current_transfer_size; /* Set at beginning of data dma */
-
- unchar espcmdlog[32]; /* Log of current esp cmds sent. */
- unchar espcmdent; /* Current entry in esp cmd log. */
-
- /* Misc. info about this ESP */
- enum esp_rev erev; /* ESP revision */
- int irq; /* IRQ for this ESP */
- int scsi_id; /* Who am I as initiator? */
- int scsi_id_mask; /* Bitmask of 'me'. */
- int diff; /* Differential SCSI bus? */
- int slot; /* Slot the adapter occupies */
-
- /* Our command queues, only one cmd lives in the current_SC queue. */
- Scsi_Cmnd *issue_SC; /* Commands to be issued */
- Scsi_Cmnd *current_SC; /* Who is currently working the bus */
- Scsi_Cmnd *disconnected_SC; /* Commands disconnected from the bus */
-
- /* Message goo */
- unchar cur_msgout[16];
- unchar cur_msgin[16];
- unchar prevmsgout, prevmsgin;
- unchar msgout_len, msgin_len;
- unchar msgout_ctr, msgin_ctr;
-
- /* States that we cannot keep in the per cmd structure because they
- * cannot be assosciated with any specific command.
- */
- unchar resetting_bus;
- wait_queue_head_t reset_queue;
-
- unchar do_pio_cmds; /* Do command transfer with pio */
-
- /* How much bits do we have to shift the registers */
- unsigned char shift;
-
- /* Functions handling DMA
- */
- /* Required functions */
- int (*dma_bytes_sent)(struct NCR_ESP *, int);
- int (*dma_can_transfer)(struct NCR_ESP *, Scsi_Cmnd *);
- void (*dma_dump_state)(struct NCR_ESP *);
- void (*dma_init_read)(struct NCR_ESP *, __u32, int);
- void (*dma_init_write)(struct NCR_ESP *, __u32, int);
- void (*dma_ints_off)(struct NCR_ESP *);
- void (*dma_ints_on)(struct NCR_ESP *);
- int (*dma_irq_p)(struct NCR_ESP *);
- int (*dma_ports_p)(struct NCR_ESP *);
- void (*dma_setup)(struct NCR_ESP *, __u32, int, int);
-
- /* Optional functions (i.e. may be initialized to 0) */
- void (*dma_barrier)(struct NCR_ESP *);
- void (*dma_drain)(struct NCR_ESP *);
- void (*dma_invalidate)(struct NCR_ESP *);
- void (*dma_irq_entry)(struct NCR_ESP *);
- void (*dma_irq_exit)(struct NCR_ESP *);
- void (*dma_led_off)(struct NCR_ESP *);
- void (*dma_led_on)(struct NCR_ESP *);
- void (*dma_poll)(struct NCR_ESP *, unsigned char *);
- void (*dma_reset)(struct NCR_ESP *);
-
- /* Optional virtual DMA functions */
- void (*dma_mmu_get_scsi_one)(struct NCR_ESP *, Scsi_Cmnd *);
- void (*dma_mmu_get_scsi_sgl)(struct NCR_ESP *, Scsi_Cmnd *);
- void (*dma_mmu_release_scsi_one)(struct NCR_ESP *, Scsi_Cmnd *);
- void (*dma_mmu_release_scsi_sgl)(struct NCR_ESP *, Scsi_Cmnd *);
- void (*dma_advance_sg)(Scsi_Cmnd *);
-};
-
-/* Bitfield meanings for the above registers. */
-
-/* ESP config reg 1, read-write, found on all ESP chips */
-#define ESP_CONFIG1_ID 0x07 /* My BUS ID bits */
-#define ESP_CONFIG1_CHTEST 0x08 /* Enable ESP chip tests */
-#define ESP_CONFIG1_PENABLE 0x10 /* Enable parity checks */
-#define ESP_CONFIG1_PARTEST 0x20 /* Parity test mode enabled? */
-#define ESP_CONFIG1_SRRDISAB 0x40 /* Disable SCSI reset reports */
-#define ESP_CONFIG1_SLCABLE 0x80 /* Enable slow cable mode */
-
-/* ESP config reg 2, read-write, found only on esp100a+esp200+esp236+fsc chips */
-#define ESP_CONFIG2_DMAPARITY 0x01 /* enable DMA Parity (200,236,fsc) */
-#define ESP_CONFIG2_REGPARITY 0x02 /* enable reg Parity (200,236,fsc) */
-#define ESP_CONFIG2_BADPARITY 0x04 /* Bad parity target abort */
-#define ESP_CONFIG2_SCSI2ENAB 0x08 /* Enable SCSI-2 features (tmode only) */
-#define ESP_CONFIG2_HI 0x10 /* High Impedance DREQ ??? */
-#define ESP_CONFIG2_HMEFENAB 0x10 /* HME features enable */
-#define ESP_CONFIG2_BCM 0x20 /* Enable byte-ctrl (236,fsc) */
-#define ESP_CONFIG2_FENAB 0x40 /* Enable features (fas100,esp216,fsc) */
-#define ESP_CONFIG2_SPL 0x40 /* Enable status-phase latch (esp236) */
-#define ESP_CONFIG2_RFB 0x80 /* Reserve FIFO byte (fsc) */
-#define ESP_CONFIG2_MAGIC 0xe0 /* Invalid bits... */
-
-/* ESP config register 3 read-write, found only esp236+fas236+fas100a+fsc chips */
-#define ESP_CONFIG3_FCLOCK 0x01 /* FAST SCSI clock rate (esp100a/fas366) */
-#define ESP_CONFIG3_TEM 0x01 /* Enable thresh-8 mode (esp/fas236/fsc) */
-#define ESP_CONFIG3_FAST 0x02 /* Enable FAST SCSI (esp100a) */
-#define ESP_CONFIG3_ADMA 0x02 /* Enable alternate-dma (esp/fas236/fsc) */
-#define ESP_CONFIG3_TENB 0x04 /* group2 SCSI2 support (esp100a) */
-#define ESP_CONFIG3_SRB 0x04 /* Save residual byte (esp/fas236/fsc) */
-#define ESP_CONFIG3_TMS 0x08 /* Three-byte msg's ok (esp100a) */
-#define ESP_CONFIG3_FCLK 0x08 /* Fast SCSI clock rate (esp/fas236/fsc) */
-#define ESP_CONFIG3_IDMSG 0x10 /* ID message checking (esp100a) */
-#define ESP_CONFIG3_FSCSI 0x10 /* Enable FAST SCSI (esp/fas236/fsc) */
-#define ESP_CONFIG3_GTM 0x20 /* group2 SCSI2 support (esp/fas236/fsc) */
-#define ESP_CONFIG3_TBMS 0x40 /* Three-byte msg's ok (esp/fas236/fsc) */
-#define ESP_CONFIG3_IMS 0x80 /* ID msg chk'ng (esp/fas236/fsc) */
-
-/* ESP config register 4 read-write, found only on fsc chips */
-#define ESP_CONFIG4_BBTE 0x01 /* Back-to-Back transfer enable */
-#define ESP_CONFIG4_TEST 0x02 /* Transfer counter test mode */
-#define ESP_CONFIG4_EAN 0x04 /* Enable Active Negotiation */
-
-/* ESP command register read-write */
-/* Group 1 commands: These may be sent at any point in time to the ESP
- * chip. None of them can generate interrupts 'cept
- * the "SCSI bus reset" command if you have not disabled
- * SCSI reset interrupts in the config1 ESP register.
- */
-#define ESP_CMD_NULL 0x00 /* Null command, ie. a nop */
-#define ESP_CMD_FLUSH 0x01 /* FIFO Flush */
-#define ESP_CMD_RC 0x02 /* Chip reset */
-#define ESP_CMD_RS 0x03 /* SCSI bus reset */
-
-/* Group 2 commands: ESP must be an initiator and connected to a target
- * for these commands to work.
- */
-#define ESP_CMD_TI 0x10 /* Transfer Information */
-#define ESP_CMD_ICCSEQ 0x11 /* Initiator cmd complete sequence */
-#define ESP_CMD_MOK 0x12 /* Message okie-dokie */
-#define ESP_CMD_TPAD 0x18 /* Transfer Pad */
-#define ESP_CMD_SATN 0x1a /* Set ATN */
-#define ESP_CMD_RATN 0x1b /* De-assert ATN */
-
-/* Group 3 commands: ESP must be in the MSGOUT or MSGIN state and be connected
- * to a target as the initiator for these commands to work.
- */
-#define ESP_CMD_SMSG 0x20 /* Send message */
-#define ESP_CMD_SSTAT 0x21 /* Send status */
-#define ESP_CMD_SDATA 0x22 /* Send data */
-#define ESP_CMD_DSEQ 0x23 /* Discontinue Sequence */
-#define ESP_CMD_TSEQ 0x24 /* Terminate Sequence */
-#define ESP_CMD_TCCSEQ 0x25 /* Target cmd cmplt sequence */
-#define ESP_CMD_DCNCT 0x27 /* Disconnect */
-#define ESP_CMD_RMSG 0x28 /* Receive Message */
-#define ESP_CMD_RCMD 0x29 /* Receive Command */
-#define ESP_CMD_RDATA 0x2a /* Receive Data */
-#define ESP_CMD_RCSEQ 0x2b /* Receive cmd sequence */
-
-/* Group 4 commands: The ESP must be in the disconnected state and must
- * not be connected to any targets as initiator for
- * these commands to work.
- */
-#define ESP_CMD_RSEL 0x40 /* Reselect */
-#define ESP_CMD_SEL 0x41 /* Select w/o ATN */
-#define ESP_CMD_SELA 0x42 /* Select w/ATN */
-#define ESP_CMD_SELAS 0x43 /* Select w/ATN & STOP */
-#define ESP_CMD_ESEL 0x44 /* Enable selection */
-#define ESP_CMD_DSEL 0x45 /* Disable selections */
-#define ESP_CMD_SA3 0x46 /* Select w/ATN3 */
-#define ESP_CMD_RSEL3 0x47 /* Reselect3 */
-
-/* This bit enables the ESP's DMA */
-#define ESP_CMD_DMA 0x80 /* Do DMA? */
-
-/* ESP status register read-only */
-#define ESP_STAT_PIO 0x01 /* IO phase bit */
-#define ESP_STAT_PCD 0x02 /* CD phase bit */
-#define ESP_STAT_PMSG 0x04 /* MSG phase bit */
-#define ESP_STAT_PMASK 0x07 /* Mask of phase bits */
-#define ESP_STAT_TDONE 0x08 /* Transfer Completed */
-#define ESP_STAT_TCNT 0x10 /* Transfer Counter Is Zero */
-#define ESP_STAT_PERR 0x20 /* Parity error */
-#define ESP_STAT_SPAM 0x40 /* Real bad error */
-/* This indicates the 'interrupt pending' condition, it is a reserved
- * bit on old revs of the ESP (ESP100, ESP100A, FAS100A).
- */
-#define ESP_STAT_INTR 0x80 /* Interrupt */
-
-/* The status register can be masked with ESP_STAT_PMASK and compared
- * with the following values to determine the current phase the ESP
- * (at least thinks it) is in. For our purposes we also add our own
- * software 'done' bit for our phase management engine.
- */
-#define ESP_DOP (0) /* Data Out */
-#define ESP_DIP (ESP_STAT_PIO) /* Data In */
-#define ESP_CMDP (ESP_STAT_PCD) /* Command */
-#define ESP_STATP (ESP_STAT_PCD|ESP_STAT_PIO) /* Status */
-#define ESP_MOP (ESP_STAT_PMSG|ESP_STAT_PCD) /* Message Out */
-#define ESP_MIP (ESP_STAT_PMSG|ESP_STAT_PCD|ESP_STAT_PIO) /* Message In */
-
-/* ESP interrupt register read-only */
-#define ESP_INTR_S 0x01 /* Select w/o ATN */
-#define ESP_INTR_SATN 0x02 /* Select w/ATN */
-#define ESP_INTR_RSEL 0x04 /* Reselected */
-#define ESP_INTR_FDONE 0x08 /* Function done */
-#define ESP_INTR_BSERV 0x10 /* Bus service */
-#define ESP_INTR_DC 0x20 /* Disconnect */
-#define ESP_INTR_IC 0x40 /* Illegal command given */
-#define ESP_INTR_SR 0x80 /* SCSI bus reset detected */
-
-/* Interrupt status macros */
-#define ESP_SRESET_IRQ(esp) ((esp)->intreg & (ESP_INTR_SR))
-#define ESP_ILLCMD_IRQ(esp) ((esp)->intreg & (ESP_INTR_IC))
-#define ESP_SELECT_WITH_ATN_IRQ(esp) ((esp)->intreg & (ESP_INTR_SATN))
-#define ESP_SELECT_WITHOUT_ATN_IRQ(esp) ((esp)->intreg & (ESP_INTR_S))
-#define ESP_SELECTION_IRQ(esp) ((ESP_SELECT_WITH_ATN_IRQ(esp)) || \
- (ESP_SELECT_WITHOUT_ATN_IRQ(esp)))
-#define ESP_RESELECTION_IRQ(esp) ((esp)->intreg & (ESP_INTR_RSEL))
-
-/* ESP sequence step register read-only */
-#define ESP_STEP_VBITS 0x07 /* Valid bits */
-#define ESP_STEP_ASEL 0x00 /* Selection&Arbitrate cmplt */
-#define ESP_STEP_SID 0x01 /* One msg byte sent */
-#define ESP_STEP_NCMD 0x02 /* Was not in command phase */
-#define ESP_STEP_PPC 0x03 /* Early phase chg caused cmnd
- * bytes to be lost
- */
-#define ESP_STEP_FINI4 0x04 /* Command was sent ok */
-
-/* Ho hum, some ESP's set the step register to this as well... */
-#define ESP_STEP_FINI5 0x05
-#define ESP_STEP_FINI6 0x06
-#define ESP_STEP_FINI7 0x07
-#define ESP_STEP_SOM 0x08 /* Synchronous Offset Max */
-
-/* ESP chip-test register read-write */
-#define ESP_TEST_TARG 0x01 /* Target test mode */
-#define ESP_TEST_INI 0x02 /* Initiator test mode */
-#define ESP_TEST_TS 0x04 /* Tristate test mode */
-
-/* ESP unique ID register read-only, found on fas236+fas100a+fsc only */
-#define ESP_UID_F100A 0x00 /* FAS100A */
-#define ESP_UID_F236 0x02 /* FAS236 */
-#define ESP_UID_FSC 0xa2 /* NCR53CF9x-2 */
-#define ESP_UID_REV 0x07 /* ESP revision */
-#define ESP_UID_FAM 0xf8 /* ESP family */
-
-/* ESP fifo flags register read-only */
-/* Note that the following implies a 16 byte FIFO on the ESP. */
-#define ESP_FF_FBYTES 0x1f /* Num bytes in FIFO */
-#define ESP_FF_ONOTZERO 0x20 /* offset ctr not zero (esp100,fsc) */
-#define ESP_FF_SSTEP 0xe0 /* Sequence step */
-
-/* ESP clock conversion factor register write-only */
-#define ESP_CCF_F0 0x00 /* 35.01MHz - 40MHz */
-#define ESP_CCF_NEVER 0x01 /* Set it to this and die */
-#define ESP_CCF_F2 0x02 /* 10MHz */
-#define ESP_CCF_F3 0x03 /* 10.01MHz - 15MHz */
-#define ESP_CCF_F4 0x04 /* 15.01MHz - 20MHz */
-#define ESP_CCF_F5 0x05 /* 20.01MHz - 25MHz */
-#define ESP_CCF_F6 0x06 /* 25.01MHz - 30MHz */
-#define ESP_CCF_F7 0x07 /* 30.01MHz - 35MHz */
-
-#define ESP_BUS_TIMEOUT 275 /* In milli-seconds */
-#define ESP_TIMEO_CONST 8192
-#define FSC_TIMEO_CONST 7668
-#define ESP_NEG_DEFP(mhz, cfact) \
- ((ESP_BUS_TIMEOUT * ((mhz) / 1000)) / (8192 * (cfact)))
-#define FSC_NEG_DEFP(mhz, cfact) \
- ((ESP_BUS_TIMEOUT * ((mhz) / 1000)) / (7668 * (cfact)))
-#define ESP_MHZ_TO_CYCLE(mhertz) ((1000000000) / ((mhertz) / 1000))
-#define ESP_TICK(ccf, cycle) ((7682 * (ccf) * (cycle) / 1000))
-
-
-/* UGLY, UGLY, UGLY! */
-extern int nesps, esps_in_use, esps_running;
-
-/* For our interrupt engine. */
-#define for_each_esp(esp) \
- for((esp) = espchain; (esp); (esp) = (esp)->next)
-
-
-/* External functions */
-extern void esp_bootup_reset(struct NCR_ESP *esp, struct ESP_regs *eregs);
-extern struct NCR_ESP *esp_allocate(struct scsi_host_template *, void *, int);
-extern void esp_deallocate(struct NCR_ESP *);
-extern void esp_release(void);
-extern void esp_initialize(struct NCR_ESP *);
-extern irqreturn_t esp_intr(int, void *);
-extern const char *esp_info(struct Scsi_Host *);
-extern int esp_queue(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-extern int esp_abort(Scsi_Cmnd *);
-extern int esp_reset(Scsi_Cmnd *);
-extern int esp_proc_info(struct Scsi_Host *shost, char *buffer, char **start, off_t offset, int length,
- int inout);
-extern int esp_slave_alloc(struct scsi_device *);
-extern void esp_slave_destroy(struct scsi_device *);
-#endif /* !(NCR53C9X_H) */
diff --git a/trunk/drivers/scsi/aacraid/aachba.c b/trunk/drivers/scsi/aacraid/aachba.c
index d7235f42cf5f..bfd0e64964ac 100644
--- a/trunk/drivers/scsi/aacraid/aachba.c
+++ b/trunk/drivers/scsi/aacraid/aachba.c
@@ -859,44 +859,31 @@ static int setinqserial(struct aac_dev *dev, void *data, int cid)
le32_to_cpu(dev->adapter_info.serial[0]), cid);
}
-static void set_sense(u8 *sense_buf, u8 sense_key, u8 sense_code,
- u8 a_sense_code, u8 incorrect_length,
- u8 bit_pointer, u16 field_pointer,
- u32 residue)
+static inline void set_sense(struct sense_data *sense_data, u8 sense_key,
+ u8 sense_code, u8 a_sense_code, u8 bit_pointer, u16 field_pointer)
{
- sense_buf[0] = 0xF0; /* Sense data valid, err code 70h (current error) */
+ u8 *sense_buf = (u8 *)sense_data;
+ /* Sense data valid, err code 70h */
+ sense_buf[0] = 0x70; /* No info field */
sense_buf[1] = 0; /* Segment number, always zero */
- if (incorrect_length) {
- sense_buf[2] = sense_key | 0x20;/* Set ILI bit | sense key */
- sense_buf[3] = BYTE3(residue);
- sense_buf[4] = BYTE2(residue);
- sense_buf[5] = BYTE1(residue);
- sense_buf[6] = BYTE0(residue);
- } else
- sense_buf[2] = sense_key; /* Sense key */
-
- if (sense_key == ILLEGAL_REQUEST)
- sense_buf[7] = 10; /* Additional sense length */
- else
- sense_buf[7] = 6; /* Additional sense length */
+ sense_buf[2] = sense_key; /* Sense key */
sense_buf[12] = sense_code; /* Additional sense code */
sense_buf[13] = a_sense_code; /* Additional sense code qualifier */
+
if (sense_key == ILLEGAL_REQUEST) {
- sense_buf[15] = 0;
+ sense_buf[7] = 10; /* Additional sense length */
- if (sense_code == SENCODE_INVALID_PARAM_FIELD)
- sense_buf[15] = 0x80;/* Std sense key specific field */
+ sense_buf[15] = bit_pointer;
/* Illegal parameter is in the parameter block */
-
if (sense_code == SENCODE_INVALID_CDB_FIELD)
- sense_buf[15] = 0xc0;/* Std sense key specific field */
+ sense_buf[15] |= 0xc0;/* Std sense key specific field */
/* Illegal parameter is in the CDB block */
- sense_buf[15] |= bit_pointer;
sense_buf[16] = field_pointer >> 8; /* MSB */
sense_buf[17] = field_pointer; /* LSB */
- }
+ } else
+ sense_buf[7] = 6; /* Additional sense length */
}
static int aac_bounds_32(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)
@@ -906,11 +893,9 @@ static int aac_bounds_32(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)
dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
SAM_STAT_CHECK_CONDITION;
- set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
- HARDWARE_ERROR,
- SENCODE_INTERNAL_TARGET_FAILURE,
- ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0,
- 0, 0);
+ set_sense(&dev->fsa_dev[cid].sense_data,
+ HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
+ ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
SCSI_SENSE_BUFFERSIZE));
@@ -1520,11 +1505,9 @@ static void io_callback(void *context, struct fib * fibptr)
le32_to_cpu(readreply->status));
#endif
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
- set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
- HARDWARE_ERROR,
- SENCODE_INTERNAL_TARGET_FAILURE,
- ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0,
- 0, 0);
+ set_sense(&dev->fsa_dev[cid].sense_data,
+ HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
+ ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
SCSI_SENSE_BUFFERSIZE));
@@ -1733,11 +1716,9 @@ static void synchronize_callback(void *context, struct fib *fibptr)
le32_to_cpu(synchronizereply->status));
cmd->result = DID_OK << 16 |
COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
- set_sense((u8 *)&dev->fsa_dev[cid].sense_data,
- HARDWARE_ERROR,
- SENCODE_INTERNAL_TARGET_FAILURE,
- ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0,
- 0, 0);
+ set_sense(&dev->fsa_dev[cid].sense_data,
+ HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
+ ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
SCSI_SENSE_BUFFERSIZE));
@@ -1945,10 +1926,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
{
dprintk((KERN_WARNING "Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd->cmnd[0]));
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
- set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
- ILLEGAL_REQUEST,
- SENCODE_INVALID_COMMAND,
- ASENCODE_INVALID_COMMAND, 0, 0, 0, 0);
+ set_sense(&dev->fsa_dev[cid].sense_data,
+ ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND,
+ ASENCODE_INVALID_COMMAND, 0, 0);
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
SCSI_SENSE_BUFFERSIZE));
@@ -1995,10 +1975,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
scsicmd->result = DID_OK << 16 |
COMMAND_COMPLETE << 8 |
SAM_STAT_CHECK_CONDITION;
- set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
- ILLEGAL_REQUEST,
- SENCODE_INVALID_CDB_FIELD,
- ASENCODE_NO_SENSE, 0, 7, 2, 0);
+ set_sense(&dev->fsa_dev[cid].sense_data,
+ ILLEGAL_REQUEST, SENCODE_INVALID_CDB_FIELD,
+ ASENCODE_NO_SENSE, 7, 2);
memcpy(scsicmd->sense_buffer,
&dev->fsa_dev[cid].sense_data,
min_t(size_t,
@@ -2254,9 +2233,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
*/
dprintk((KERN_WARNING "Unhandled SCSI Command: 0x%x.\n", scsicmd->cmnd[0]));
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
- set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
- ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND,
- ASENCODE_INVALID_COMMAND, 0, 0, 0, 0);
+ set_sense(&dev->fsa_dev[cid].sense_data,
+ ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND,
+ ASENCODE_INVALID_COMMAND, 0, 0);
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
min_t(size_t,
sizeof(dev->fsa_dev[cid].sense_data),
diff --git a/trunk/drivers/scsi/aacraid/commctrl.c b/trunk/drivers/scsi/aacraid/commctrl.c
index f8afa358b6b6..abef05146d75 100644
--- a/trunk/drivers/scsi/aacraid/commctrl.c
+++ b/trunk/drivers/scsi/aacraid/commctrl.c
@@ -243,6 +243,7 @@ static int next_getadapter_fib(struct aac_dev * dev, void __user *arg)
* Search the list of AdapterFibContext addresses on the adapter
* to be sure this is a valid address
*/
+ spin_lock_irqsave(&dev->fib_lock, flags);
entry = dev->fib_list.next;
fibctx = NULL;
@@ -251,24 +252,25 @@ static int next_getadapter_fib(struct aac_dev * dev, void __user *arg)
/*
* Extract the AdapterFibContext from the Input parameters.
*/
- if (fibctx->unique == f.fibctx) { /* We found a winner */
+ if (fibctx->unique == f.fibctx) { /* We found a winner */
break;
}
entry = entry->next;
fibctx = NULL;
}
if (!fibctx) {
+ spin_unlock_irqrestore(&dev->fib_lock, flags);
dprintk ((KERN_INFO "Fib Context not found\n"));
return -EINVAL;
}
if((fibctx->type != FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT) ||
(fibctx->size != sizeof(struct aac_fib_context))) {
+ spin_unlock_irqrestore(&dev->fib_lock, flags);
dprintk ((KERN_INFO "Fib Context corrupt?\n"));
return -EINVAL;
}
status = 0;
- spin_lock_irqsave(&dev->fib_lock, flags);
/*
* If there are no fibs to send back, then either wait or return
* -EAGAIN
@@ -414,8 +416,8 @@ static int close_getadapter_fib(struct aac_dev * dev, void __user *arg)
* @arg: ioctl arguments
*
* This routine returns the driver version.
- * Under Linux, there have been no version incompatibilities, so this is
- * simple!
+ * Under Linux, there have been no version incompatibilities, so this is
+ * simple!
*/
static int check_revision(struct aac_dev *dev, void __user *arg)
@@ -463,7 +465,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
u32 data_dir;
void __user *sg_user[32];
void *sg_list[32];
- u32 sg_indx = 0;
+ u32 sg_indx = 0;
u32 byte_count = 0;
u32 actual_fibsize64, actual_fibsize = 0;
int i;
@@ -517,11 +519,11 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
// Fix up srb for endian and force some values
srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi); // Force this
- srbcmd->channel = cpu_to_le32(user_srbcmd->channel);
+ srbcmd->channel = cpu_to_le32(user_srbcmd->channel);
srbcmd->id = cpu_to_le32(user_srbcmd->id);
- srbcmd->lun = cpu_to_le32(user_srbcmd->lun);
- srbcmd->timeout = cpu_to_le32(user_srbcmd->timeout);
- srbcmd->flags = cpu_to_le32(flags);
+ srbcmd->lun = cpu_to_le32(user_srbcmd->lun);
+ srbcmd->timeout = cpu_to_le32(user_srbcmd->timeout);
+ srbcmd->flags = cpu_to_le32(flags);
srbcmd->retry_limit = 0; // Obsolete parameter
srbcmd->cdb_size = cpu_to_le32(user_srbcmd->cdb_size);
memcpy(srbcmd->cdb, user_srbcmd->cdb, sizeof(srbcmd->cdb));
@@ -786,9 +788,9 @@ static int aac_get_pci_info(struct aac_dev* dev, void __user *arg)
pci_info.bus = dev->pdev->bus->number;
pci_info.slot = PCI_SLOT(dev->pdev->devfn);
- if (copy_to_user(arg, &pci_info, sizeof(struct aac_pci_info))) {
- dprintk((KERN_DEBUG "aacraid: Could not copy pci info\n"));
- return -EFAULT;
+ if (copy_to_user(arg, &pci_info, sizeof(struct aac_pci_info))) {
+ dprintk((KERN_DEBUG "aacraid: Could not copy pci info\n"));
+ return -EFAULT;
}
return 0;
}
diff --git a/trunk/drivers/scsi/aacraid/linit.c b/trunk/drivers/scsi/aacraid/linit.c
index fb0886140dd7..e80d2a0c46af 100644
--- a/trunk/drivers/scsi/aacraid/linit.c
+++ b/trunk/drivers/scsi/aacraid/linit.c
@@ -1130,31 +1130,29 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
if (error < 0)
goto out_deinit;
- if (!(aac->adapter_info.options & AAC_OPT_NEW_COMM)) {
- error = pci_set_dma_max_seg_size(pdev, 65536);
- if (error)
- goto out_deinit;
- }
-
/*
* Lets override negotiations and drop the maximum SG limit to 34
*/
if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) &&
- (aac->scsi_host_ptr->sg_tablesize > 34)) {
- aac->scsi_host_ptr->sg_tablesize = 34;
- aac->scsi_host_ptr->max_sectors
- = (aac->scsi_host_ptr->sg_tablesize * 8) + 112;
+ (shost->sg_tablesize > 34)) {
+ shost->sg_tablesize = 34;
+ shost->max_sectors = (shost->sg_tablesize * 8) + 112;
}
if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) &&
- (aac->scsi_host_ptr->sg_tablesize > 17)) {
- aac->scsi_host_ptr->sg_tablesize = 17;
- aac->scsi_host_ptr->max_sectors
- = (aac->scsi_host_ptr->sg_tablesize * 8) + 112;
+ (shost->sg_tablesize > 17)) {
+ shost->sg_tablesize = 17;
+ shost->max_sectors = (shost->sg_tablesize * 8) + 112;
}
+ error = pci_set_dma_max_seg_size(pdev,
+ (aac->adapter_info.options & AAC_OPT_NEW_COMM) ?
+ (shost->max_sectors << 9) : 65536);
+ if (error)
+ goto out_deinit;
+
/*
- * Firware printf works only with older firmware.
+ * Firmware printf works only with older firmware.
*/
if (aac_drivers[index].quirks & AAC_QUIRK_34SG)
aac->printf_enabled = 1;
diff --git a/trunk/drivers/scsi/advansys.c b/trunk/drivers/scsi/advansys.c
index 374ed025dc5a..ccef891d642f 100644
--- a/trunk/drivers/scsi/advansys.c
+++ b/trunk/drivers/scsi/advansys.c
@@ -12261,7 +12261,7 @@ static ushort __devinit AdvReadEEPWord(AdvPortAddr iop_base, int eep_word_addr)
/*
* Write the EEPROM from 'cfg_buf'.
*/
-void __devinit
+static void __devinit
AdvSet3550EEPConfig(AdvPortAddr iop_base, ADVEEP_3550_CONFIG *cfg_buf)
{
ushort *wbuf;
@@ -12328,7 +12328,7 @@ AdvSet3550EEPConfig(AdvPortAddr iop_base, ADVEEP_3550_CONFIG *cfg_buf)
/*
* Write the EEPROM from 'cfg_buf'.
*/
-void __devinit
+static void __devinit
AdvSet38C0800EEPConfig(AdvPortAddr iop_base, ADVEEP_38C0800_CONFIG *cfg_buf)
{
ushort *wbuf;
@@ -12395,7 +12395,7 @@ AdvSet38C0800EEPConfig(AdvPortAddr iop_base, ADVEEP_38C0800_CONFIG *cfg_buf)
/*
* Write the EEPROM from 'cfg_buf'.
*/
-void __devinit
+static void __devinit
AdvSet38C1600EEPConfig(AdvPortAddr iop_base, ADVEEP_38C1600_CONFIG *cfg_buf)
{
ushort *wbuf;
diff --git a/trunk/drivers/scsi/arcmsr/arcmsr.h b/trunk/drivers/scsi/arcmsr/arcmsr.h
index a67e29f83ae5..57786502e3ec 100644
--- a/trunk/drivers/scsi/arcmsr/arcmsr.h
+++ b/trunk/drivers/scsi/arcmsr/arcmsr.h
@@ -48,7 +48,7 @@ struct class_device_attribute;
/*The limit of outstanding scsi command that firmware can handle*/
#define ARCMSR_MAX_OUTSTANDING_CMD 256
#define ARCMSR_MAX_FREECCB_NUM 320
-#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2007/08/30"
+#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2007/12/24"
#define ARCMSR_SCSI_INITIATOR_ID 255
#define ARCMSR_MAX_XFER_SECTORS 512
#define ARCMSR_MAX_XFER_SECTORS_B 4096
@@ -248,6 +248,7 @@ struct FIRMWARE_INFO
#define ARCMSR_MESSAGE_START_BGRB 0x00060008
#define ARCMSR_MESSAGE_START_DRIVER_MODE 0x000E0008
#define ARCMSR_MESSAGE_SET_POST_WINDOW 0x000F0008
+#define ARCMSR_MESSAGE_ACTIVE_EOI_MODE 0x00100008
/* ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK */
#define ARCMSR_MESSAGE_FIRMWARE_OK 0x80000000
/* ioctl transfer */
@@ -256,6 +257,7 @@ struct FIRMWARE_INFO
#define ARCMSR_DRV2IOP_DATA_READ_OK 0x00000002
#define ARCMSR_DRV2IOP_CDB_POSTED 0x00000004
#define ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED 0x00000008
+#define ARCMSR_DRV2IOP_END_OF_INTERRUPT 0x00000010
/* data tunnel buffer between user space program and its firmware */
/* user space data to iop 128bytes */
diff --git a/trunk/drivers/scsi/arcmsr/arcmsr_hba.c b/trunk/drivers/scsi/arcmsr/arcmsr_hba.c
index f4a202e8df26..4f9ff32cfed0 100644
--- a/trunk/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/trunk/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -315,9 +315,6 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
(0x20 - ((unsigned long)dma_coherent_handle & 0x1F));
}
- reg = (struct MessageUnit_B *)(dma_coherent +
- ARCMSR_MAX_FREECCB_NUM * sizeof(struct CommandControlBlock));
-
dma_addr = dma_coherent_handle;
ccb_tmp = (struct CommandControlBlock *)dma_coherent;
for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) {
@@ -371,8 +368,8 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
out:
dma_free_coherent(&acb->pdev->dev,
- ARCMSR_MAX_FREECCB_NUM * sizeof(struct CommandControlBlock) + 0x20,
- acb->dma_coherent, acb->dma_coherent_handle);
+ (ARCMSR_MAX_FREECCB_NUM * sizeof(struct CommandControlBlock) + 0x20 +
+ sizeof(struct MessageUnit_B)), acb->dma_coherent, acb->dma_coherent_handle);
return -ENOMEM;
}
@@ -509,6 +506,7 @@ static uint8_t arcmsr_hbb_wait_msgint_ready(struct AdapterControlBlock *acb)
& ARCMSR_IOP2DRV_MESSAGE_CMD_DONE) {
writel(ARCMSR_MESSAGE_INT_CLEAR_PATTERN
, reg->iop2drv_doorbell_reg);
+ writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT, reg->drv2iop_doorbell_reg);
return 0x00;
}
msleep(10);
@@ -748,6 +746,7 @@ static void arcmsr_drain_donequeue(struct AdapterControlBlock *acb, uint32_t fla
, ccb->startdone
, atomic_read(&acb->ccboutstandingcount));
}
+ else
arcmsr_report_ccb_state(acb, ccb, flag_ccb);
}
@@ -886,7 +885,7 @@ static void arcmsr_enable_outbound_ints(struct AdapterControlBlock *acb, \
}
}
-static void arcmsr_build_ccb(struct AdapterControlBlock *acb,
+static int arcmsr_build_ccb(struct AdapterControlBlock *acb,
struct CommandControlBlock *ccb, struct scsi_cmnd *pcmd)
{
struct ARCMSR_CDB *arcmsr_cdb = (struct ARCMSR_CDB *)&ccb->arcmsr_cdb;
@@ -906,6 +905,8 @@ static void arcmsr_build_ccb(struct AdapterControlBlock *acb,
memcpy(arcmsr_cdb->Cdb, pcmd->cmnd, pcmd->cmd_len);
nseg = scsi_dma_map(pcmd);
+ if (nseg > ARCMSR_MAX_SG_ENTRIES)
+ return FAILED;
BUG_ON(nseg < 0);
if (nseg) {
@@ -946,6 +947,7 @@ static void arcmsr_build_ccb(struct AdapterControlBlock *acb,
arcmsr_cdb->Flags |= ARCMSR_CDB_FLAG_WRITE;
ccb->ccb_flags |= CCB_FLAG_WRITE;
}
+ return SUCCESS;
}
static void arcmsr_post_ccb(struct AdapterControlBlock *acb, struct CommandControlBlock *ccb)
@@ -1036,18 +1038,22 @@ static void arcmsr_free_ccb_pool(struct AdapterControlBlock *acb)
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A: {
iounmap(acb->pmuA);
+ dma_free_coherent(&acb->pdev->dev,
+ ARCMSR_MAX_FREECCB_NUM * sizeof (struct CommandControlBlock) + 0x20,
+ acb->dma_coherent,
+ acb->dma_coherent_handle);
break;
}
case ACB_ADAPTER_TYPE_B: {
struct MessageUnit_B *reg = acb->pmuB;
iounmap(reg->drv2iop_doorbell_reg - ARCMSR_DRV2IOP_DOORBELL);
iounmap(reg->ioctl_wbuffer_reg - ARCMSR_IOCTL_WBUFFER);
+ dma_free_coherent(&acb->pdev->dev,
+ (ARCMSR_MAX_FREECCB_NUM * sizeof(struct CommandControlBlock) + 0x20 +
+ sizeof(struct MessageUnit_B)), acb->dma_coherent, acb->dma_coherent_handle);
}
}
- dma_free_coherent(&acb->pdev->dev,
- ARCMSR_MAX_FREECCB_NUM * sizeof (struct CommandControlBlock) + 0x20,
- acb->dma_coherent,
- acb->dma_coherent_handle);
+
}
void arcmsr_iop_message_read(struct AdapterControlBlock *acb)
@@ -1273,7 +1279,9 @@ static int arcmsr_handle_hbb_isr(struct AdapterControlBlock *acb)
return 1;
writel(~outbound_doorbell, reg->iop2drv_doorbell_reg);
-
+ /*in case the last action of doorbell interrupt clearance is cached, this action can push HW to write down the clear bit*/
+ readl(reg->iop2drv_doorbell_reg);
+ writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT, reg->drv2iop_doorbell_reg);
if (outbound_doorbell & ARCMSR_IOP2DRV_DATA_WRITE_OK) {
arcmsr_iop2drv_data_wrote_handle(acb);
}
@@ -1380,12 +1388,13 @@ static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, \
case ARCMSR_MESSAGE_READ_RQBUFFER: {
unsigned long *ver_addr;
- dma_addr_t buf_handle;
uint8_t *pQbuffer, *ptmpQbuffer;
int32_t allxfer_len = 0;
+ void *tmp;
- ver_addr = pci_alloc_consistent(acb->pdev, 1032, &buf_handle);
- if (!ver_addr) {
+ tmp = kmalloc(1032, GFP_KERNEL|GFP_DMA);
+ ver_addr = (unsigned long *)tmp;
+ if (!tmp) {
retvalue = ARCMSR_MESSAGE_FAIL;
goto message_out;
}
@@ -1421,18 +1430,19 @@ static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, \
memcpy(pcmdmessagefld->messagedatabuffer, (uint8_t *)ver_addr, allxfer_len);
pcmdmessagefld->cmdmessage.Length = allxfer_len;
pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_OK;
- pci_free_consistent(acb->pdev, 1032, ver_addr, buf_handle);
+ kfree(tmp);
}
break;
case ARCMSR_MESSAGE_WRITE_WQBUFFER: {
unsigned long *ver_addr;
- dma_addr_t buf_handle;
int32_t my_empty_len, user_len, wqbuf_firstindex, wqbuf_lastindex;
uint8_t *pQbuffer, *ptmpuserbuffer;
+ void *tmp;
- ver_addr = pci_alloc_consistent(acb->pdev, 1032, &buf_handle);
- if (!ver_addr) {
+ tmp = kmalloc(1032, GFP_KERNEL|GFP_DMA);
+ ver_addr = (unsigned long *)tmp;
+ if (!tmp) {
retvalue = ARCMSR_MESSAGE_FAIL;
goto message_out;
}
@@ -1482,7 +1492,7 @@ static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, \
retvalue = ARCMSR_MESSAGE_FAIL;
}
}
- pci_free_consistent(acb->pdev, 1032, ver_addr, buf_handle);
+ kfree(tmp);
}
break;
@@ -1682,8 +1692,11 @@ static int arcmsr_queue_command(struct scsi_cmnd *cmd,
ccb = arcmsr_get_freeccb(acb);
if (!ccb)
return SCSI_MLQUEUE_HOST_BUSY;
-
- arcmsr_build_ccb(acb, ccb, cmd);
+ if ( arcmsr_build_ccb( acb, ccb, cmd ) == FAILED ) {
+ cmd->result = (DID_ERROR << 16) | (RESERVATION_CONFLICT << 1);
+ cmd->scsi_done(cmd);
+ return 0;
+ }
arcmsr_post_ccb(acb, ccb);
return 0;
}
@@ -1844,7 +1857,7 @@ static void arcmsr_polling_hba_ccbdone(struct AdapterControlBlock *acb,
}
}
-static void arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb, \
+static void arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb,
struct CommandControlBlock *poll_ccb)
{
struct MessageUnit_B *reg = acb->pmuB;
@@ -1878,7 +1891,7 @@ static void arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb, \
(acb->vir2phy_offset + (flag_ccb << 5));/*frame must be 32 bytes aligned*/
poll_ccb_done = (ccb == poll_ccb) ? 1:0;
if ((ccb->acb != acb) || (ccb->startdone != ARCMSR_CCB_START)) {
- if (ccb->startdone == ARCMSR_CCB_ABORTED) {
+ if ((ccb->startdone == ARCMSR_CCB_ABORTED) || (ccb == poll_ccb)) {
printk(KERN_NOTICE "arcmsr%d: \
scsi id = %d lun = %d ccb = '0x%p' poll command abort successfully \n"
,acb->host->host_no
@@ -1901,7 +1914,7 @@ static void arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb, \
} /*drain reply FIFO*/
}
-static void arcmsr_polling_ccbdone(struct AdapterControlBlock *acb, \
+static void arcmsr_polling_ccbdone(struct AdapterControlBlock *acb,
struct CommandControlBlock *poll_ccb)
{
switch (acb->adapter_type) {
@@ -2026,6 +2039,7 @@ static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb)
do {
firmware_state = readl(reg->iop2drv_doorbell_reg);
} while ((firmware_state & ARCMSR_MESSAGE_FIRMWARE_OK) == 0);
+ writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT, reg->drv2iop_doorbell_reg);
}
break;
}
@@ -2090,19 +2104,39 @@ static void arcmsr_clear_doorbell_queue_buffer(struct AdapterControlBlock *acb)
}
}
+static void arcmsr_enable_eoi_mode(struct AdapterControlBlock *acb)
+{
+ switch (acb->adapter_type) {
+ case ACB_ADAPTER_TYPE_A:
+ return;
+ case ACB_ADAPTER_TYPE_B:
+ {
+ struct MessageUnit_B *reg = acb->pmuB;
+ writel(ARCMSR_MESSAGE_ACTIVE_EOI_MODE, reg->drv2iop_doorbell_reg);
+ if(arcmsr_hbb_wait_msgint_ready(acb)) {
+ printk(KERN_NOTICE "ARCMSR IOP enables EOI_MODE TIMEOUT");
+ return;
+ }
+ }
+ break;
+ }
+ return;
+}
+
static void arcmsr_iop_init(struct AdapterControlBlock *acb)
{
uint32_t intmask_org;
- arcmsr_wait_firmware_ready(acb);
- arcmsr_iop_confirm(acb);
/* disable all outbound interrupt */
intmask_org = arcmsr_disable_outbound_ints(acb);
+ arcmsr_wait_firmware_ready(acb);
+ arcmsr_iop_confirm(acb);
arcmsr_get_firmware_spec(acb);
/*start background rebuild*/
arcmsr_start_adapter_bgrb(acb);
/* empty doorbell Qbuffer if door bell ringed */
arcmsr_clear_doorbell_queue_buffer(acb);
+ arcmsr_enable_eoi_mode(acb);
/* enable outbound Post Queue,outbound doorbell Interrupt */
arcmsr_enable_outbound_ints(acb, intmask_org);
acb->acb_flags |= ACB_F_IOP_INITED;
@@ -2275,6 +2309,7 @@ static pci_ers_result_t arcmsr_pci_slot_reset(struct pci_dev *pdev)
arcmsr_start_adapter_bgrb(acb);
/* empty doorbell Qbuffer if door bell ringed */
arcmsr_clear_doorbell_queue_buffer(acb);
+ arcmsr_enable_eoi_mode(acb);
/* enable outbound Post Queue,outbound doorbell Interrupt */
arcmsr_enable_outbound_ints(acb, intmask_org);
acb->acb_flags |= ACB_F_IOP_INITED;
diff --git a/trunk/drivers/scsi/arm/acornscsi.c b/trunk/drivers/scsi/arm/acornscsi.c
index eceacf6d49ea..3bedf2466bd1 100644
--- a/trunk/drivers/scsi/arm/acornscsi.c
+++ b/trunk/drivers/scsi/arm/acornscsi.c
@@ -1790,7 +1790,7 @@ int acornscsi_starttransfer(AS_Host *host)
return 0;
}
- residual = host->SCpnt->request_bufflen - host->scsi.SCp.scsi_xferred;
+ residual = scsi_bufflen(host->SCpnt) - host->scsi.SCp.scsi_xferred;
sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
sbic_arm_writenext(host->scsi.io_port, residual >> 16);
@@ -2270,7 +2270,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
case 0x4b: /* -> PHASE_STATUSIN */
case 0x8b: /* -> PHASE_STATUSIN */
/* DATA IN -> STATUS */
- host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen -
+ host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) -
acornscsi_sbic_xfcount(host);
acornscsi_dma_stop(host);
acornscsi_readstatusbyte(host);
@@ -2281,7 +2281,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
case 0x4e: /* -> PHASE_MSGOUT */
case 0x8e: /* -> PHASE_MSGOUT */
/* DATA IN -> MESSAGE OUT */
- host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen -
+ host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) -
acornscsi_sbic_xfcount(host);
acornscsi_dma_stop(host);
acornscsi_sendmessage(host);
@@ -2291,7 +2291,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
case 0x4f: /* message in */
case 0x8f: /* message in */
/* DATA IN -> MESSAGE IN */
- host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen -
+ host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) -
acornscsi_sbic_xfcount(host);
acornscsi_dma_stop(host);
acornscsi_message(host); /* -> PHASE_MSGIN, PHASE_DISCONNECT */
@@ -2319,7 +2319,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
case 0x4b: /* -> PHASE_STATUSIN */
case 0x8b: /* -> PHASE_STATUSIN */
/* DATA OUT -> STATUS */
- host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen -
+ host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) -
acornscsi_sbic_xfcount(host);
acornscsi_dma_stop(host);
acornscsi_dma_adjust(host);
@@ -2331,7 +2331,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
case 0x4e: /* -> PHASE_MSGOUT */
case 0x8e: /* -> PHASE_MSGOUT */
/* DATA OUT -> MESSAGE OUT */
- host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen -
+ host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) -
acornscsi_sbic_xfcount(host);
acornscsi_dma_stop(host);
acornscsi_dma_adjust(host);
@@ -2342,7 +2342,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
case 0x4f: /* message in */
case 0x8f: /* message in */
/* DATA OUT -> MESSAGE IN */
- host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen -
+ host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) -
acornscsi_sbic_xfcount(host);
acornscsi_dma_stop(host);
acornscsi_dma_adjust(host);
diff --git a/trunk/drivers/scsi/arm/scsi.h b/trunk/drivers/scsi/arm/scsi.h
index bb6550e31926..138a521ba1a8 100644
--- a/trunk/drivers/scsi/arm/scsi.h
+++ b/trunk/drivers/scsi/arm/scsi.h
@@ -18,17 +18,32 @@
* The scatter-gather list handling. This contains all
* the yucky stuff that needs to be fixed properly.
*/
+
+/*
+ * copy_SCp_to_sg() Assumes contiguous allocation at @sg of at-most @max
+ * entries of uninitialized memory. SCp is from scsi-ml and has a valid
+ * (possibly chained) sg-list
+ */
static inline int copy_SCp_to_sg(struct scatterlist *sg, struct scsi_pointer *SCp, int max)
{
int bufs = SCp->buffers_residual;
+ /* FIXME: It should be easy for drivers to loop on copy_SCp_to_sg().
+ * and to remove this BUG_ON. Use min() in-its-place
+ */
BUG_ON(bufs + 1 > max);
sg_set_buf(sg, SCp->ptr, SCp->this_residual);
- if (bufs)
- memcpy(sg + 1, SCp->buffer + 1,
- sizeof(struct scatterlist) * bufs);
+ if (bufs) {
+ struct scatterlist *src_sg;
+ unsigned i;
+
+ for_each_sg(sg_next(SCp->buffer), src_sg, bufs, i)
+ *(++sg) = *src_sg;
+ sg_mark_end(sg);
+ }
+
return bufs + 1;
}
@@ -36,7 +51,7 @@ static inline int next_SCp(struct scsi_pointer *SCp)
{
int ret = SCp->buffers_residual;
if (ret) {
- SCp->buffer++;
+ SCp->buffer = sg_next(SCp->buffer);
SCp->buffers_residual--;
SCp->ptr = sg_virt(SCp->buffer);
SCp->this_residual = SCp->buffer->length;
@@ -68,46 +83,46 @@ static inline void init_SCp(struct scsi_cmnd *SCpnt)
{
memset(&SCpnt->SCp, 0, sizeof(struct scsi_pointer));
- if (SCpnt->use_sg) {
+ if (scsi_bufflen(SCpnt)) {
unsigned long len = 0;
- int buf;
- SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer;
- SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1;
+ SCpnt->SCp.buffer = scsi_sglist(SCpnt);
+ SCpnt->SCp.buffers_residual = scsi_sg_count(SCpnt) - 1;
SCpnt->SCp.ptr = sg_virt(SCpnt->SCp.buffer);
SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
- SCpnt->SCp.phase = SCpnt->request_bufflen;
+ SCpnt->SCp.phase = scsi_bufflen(SCpnt);
#ifdef BELT_AND_BRACES
- /*
- * Calculate correct buffer length. Some commands
- * come in with the wrong request_bufflen.
- */
- for (buf = 0; buf <= SCpnt->SCp.buffers_residual; buf++)
- len += SCpnt->SCp.buffer[buf].length;
-
- if (SCpnt->request_bufflen != len)
- printk(KERN_WARNING "scsi%d.%c: bad request buffer "
- "length %d, should be %ld\n", SCpnt->device->host->host_no,
- '0' + SCpnt->device->id, SCpnt->request_bufflen, len);
- SCpnt->request_bufflen = len;
+ { /*
+ * Calculate correct buffer length. Some commands
+ * come in with the wrong scsi_bufflen.
+ */
+ struct scatterlist *sg;
+ unsigned i, sg_count = scsi_sg_count(SCpnt);
+
+ scsi_for_each_sg(SCpnt, sg, sg_count, i)
+ len += sg->length;
+
+ if (scsi_bufflen(SCpnt) != len) {
+ printk(KERN_WARNING
+ "scsi%d.%c: bad request buffer "
+ "length %d, should be %ld\n",
+ SCpnt->device->host->host_no,
+ '0' + SCpnt->device->id,
+ scsi_bufflen(SCpnt), len);
+ /*
+ * FIXME: Totaly naive fixup. We should abort
+ * with error
+ */
+ SCpnt->SCp.phase =
+ min_t(unsigned long, len,
+ scsi_bufflen(SCpnt));
+ }
+ }
#endif
} else {
- SCpnt->SCp.ptr = (unsigned char *)SCpnt->request_buffer;
- SCpnt->SCp.this_residual = SCpnt->request_bufflen;
- SCpnt->SCp.phase = SCpnt->request_bufflen;
- }
-
- /*
- * If the upper SCSI layers pass a buffer, but zero length,
- * we aren't interested in the buffer pointer.
- */
- if (SCpnt->SCp.this_residual == 0 && SCpnt->SCp.ptr) {
-#if 0 //def BELT_AND_BRACES
- printk(KERN_WARNING "scsi%d.%c: zero length buffer passed for "
- "command ", SCpnt->host->host_no, '0' + SCpnt->target);
- __scsi_print_command(SCpnt->cmnd);
-#endif
SCpnt->SCp.ptr = NULL;
+ SCpnt->SCp.this_residual = 0;
+ SCpnt->SCp.phase = 0;
}
}
diff --git a/trunk/drivers/scsi/blz1230.c b/trunk/drivers/scsi/blz1230.c
deleted file mode 100644
index 23f7c24ab809..000000000000
--- a/trunk/drivers/scsi/blz1230.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/* blz1230.c: Driver for Blizzard 1230 SCSI IV Controller.
- *
- * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
- *
- * This driver is based on the CyberStorm driver, hence the occasional
- * reference to CyberStorm.
- */
-
-/* TODO:
- *
- * 1) Figure out how to make a cleaner merge with the sparc driver with regard
- * to the caches and the Sparc MMU mapping.
- * 2) Make as few routines required outside the generic driver. A lot of the
- * routines in this file used to be inline!
- */
-
-#include
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include "scsi.h"
-#include
-#include "NCR53C9x.h"
-
-#include
-#include
-#include
-#include
-
-#include
-
-#define MKIV 1
-
-/* The controller registers can be found in the Z2 config area at these
- * offsets:
- */
-#define BLZ1230_ESP_ADDR 0x8000
-#define BLZ1230_DMA_ADDR 0x10000
-#define BLZ1230II_ESP_ADDR 0x10000
-#define BLZ1230II_DMA_ADDR 0x10021
-
-
-/* The Blizzard 1230 DMA interface
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * Only two things can be programmed in the Blizzard DMA:
- * 1) The data direction is controlled by the status of bit 31 (1 = write)
- * 2) The source/dest address (word aligned, shifted one right) in bits 30-0
- *
- * Program DMA by first latching the highest byte of the address/direction
- * (i.e. bits 31-24 of the long word constructed as described in steps 1+2
- * above). Then write each byte of the address/direction (starting with the
- * top byte, working down) to the DMA address register.
- *
- * Figure out interrupt status by reading the ESP status byte.
- */
-struct blz1230_dma_registers {
- volatile unsigned char dma_addr; /* DMA address [0x0000] */
- unsigned char dmapad2[0x7fff];
- volatile unsigned char dma_latch; /* DMA latch [0x8000] */
-};
-
-struct blz1230II_dma_registers {
- volatile unsigned char dma_addr; /* DMA address [0x0000] */
- unsigned char dmapad2[0xf];
- volatile unsigned char dma_latch; /* DMA latch [0x0010] */
-};
-
-#define BLZ1230_DMA_WRITE 0x80000000
-
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_dump_state(struct NCR_ESP *esp);
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_ints_off(struct NCR_ESP *esp);
-static void dma_ints_on(struct NCR_ESP *esp);
-static int dma_irq_p(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
-
-static volatile unsigned char cmd_buffer[16];
- /* This is where all commands are put
- * before they are transferred to the ESP chip
- * via PIO.
- */
-
-/***************************************************************** Detection */
-int __init blz1230_esp_detect(struct scsi_host_template *tpnt)
-{
- struct NCR_ESP *esp;
- struct zorro_dev *z = NULL;
- unsigned long address;
- struct ESP_regs *eregs;
- unsigned long board;
-
-#if MKIV
-#define REAL_BLZ1230_ID ZORRO_PROD_PHASE5_BLIZZARD_1230_IV_1260
-#define REAL_BLZ1230_ESP_ADDR BLZ1230_ESP_ADDR
-#define REAL_BLZ1230_DMA_ADDR BLZ1230_DMA_ADDR
-#else
-#define REAL_BLZ1230_ID ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060
-#define REAL_BLZ1230_ESP_ADDR BLZ1230II_ESP_ADDR
-#define REAL_BLZ1230_DMA_ADDR BLZ1230II_DMA_ADDR
-#endif
-
- if ((z = zorro_find_device(REAL_BLZ1230_ID, z))) {
- board = z->resource.start;
- if (request_mem_region(board+REAL_BLZ1230_ESP_ADDR,
- sizeof(struct ESP_regs), "NCR53C9x")) {
- /* Do some magic to figure out if the blizzard is
- * equipped with a SCSI controller
- */
- address = ZTWO_VADDR(board);
- eregs = (struct ESP_regs *)(address + REAL_BLZ1230_ESP_ADDR);
- esp = esp_allocate(tpnt, (void *)board + REAL_BLZ1230_ESP_ADDR,
- 0);
-
- esp_write(eregs->esp_cfg1, (ESP_CONFIG1_PENABLE | 7));
- udelay(5);
- if(esp_read(eregs->esp_cfg1) != (ESP_CONFIG1_PENABLE | 7))
- goto err_out;
-
- /* Do command transfer with programmed I/O */
- esp->do_pio_cmds = 1;
-
- /* Required functions */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = &dma_init_read;
- esp->dma_init_write = &dma_init_write;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
- esp->dma_irq_p = &dma_irq_p;
- esp->dma_ports_p = &dma_ports_p;
- esp->dma_setup = &dma_setup;
-
- /* Optional functions */
- esp->dma_barrier = 0;
- esp->dma_drain = 0;
- esp->dma_invalidate = 0;
- esp->dma_irq_entry = 0;
- esp->dma_irq_exit = 0;
- esp->dma_led_on = 0;
- esp->dma_led_off = 0;
- esp->dma_poll = 0;
- esp->dma_reset = 0;
-
- /* SCSI chip speed */
- esp->cfreq = 40000000;
-
- /* The DMA registers on the Blizzard are mapped
- * relative to the device (i.e. in the same Zorro
- * I/O block).
- */
- esp->dregs = (void *)(address + REAL_BLZ1230_DMA_ADDR);
-
- /* ESP register base */
- esp->eregs = eregs;
-
- /* Set the command buffer */
- esp->esp_command = cmd_buffer;
- esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
-
- esp->irq = IRQ_AMIGA_PORTS;
- esp->slot = board+REAL_BLZ1230_ESP_ADDR;
- if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
- "Blizzard 1230 SCSI IV", esp->ehost))
- goto err_out;
-
- /* Figure out our scsi ID on the bus */
- esp->scsi_id = 7;
-
- /* We don't have a differential SCSI-bus. */
- esp->diff = 0;
-
- esp_initialize(esp);
-
- printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use);
- esps_running = esps_in_use;
- return esps_in_use;
- }
- }
- return 0;
-
- err_out:
- scsi_unregister(esp->ehost);
- esp_deallocate(esp);
- release_mem_region(board+REAL_BLZ1230_ESP_ADDR,
- sizeof(struct ESP_regs));
- return 0;
-}
-
-/************************************************************* DMA Functions */
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
-{
- /* Since the Blizzard DMA is fully dedicated to the ESP chip,
- * the number of bytes sent (to the ESP chip) equals the number
- * of bytes in the FIFO - there is no buffering in the DMA controller.
- * XXXX Do I read this right? It is from host to ESP, right?
- */
- return fifo_count;
-}
-
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- /* I don't think there's any limit on the Blizzard DMA. So we use what
- * the ESP chip can handle (24 bit).
- */
- unsigned long sz = sp->SCp.this_residual;
- if(sz > 0x1000000)
- sz = 0x1000000;
- return sz;
-}
-
-static void dma_dump_state(struct NCR_ESP *esp)
-{
- ESPLOG(("intreq:<%04x>, intena:<%04x>\n",
- amiga_custom.intreqr, amiga_custom.intenar));
-}
-
-void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length)
-{
-#if MKIV
- struct blz1230_dma_registers *dregs =
- (struct blz1230_dma_registers *) (esp->dregs);
-#else
- struct blz1230II_dma_registers *dregs =
- (struct blz1230II_dma_registers *) (esp->dregs);
-#endif
-
- cache_clear(addr, length);
-
- addr >>= 1;
- addr &= ~(BLZ1230_DMA_WRITE);
-
- /* First set latch */
- dregs->dma_latch = (addr >> 24) & 0xff;
-
- /* Then pump the address to the DMA address register */
-#if MKIV
- dregs->dma_addr = (addr >> 24) & 0xff;
-#endif
- dregs->dma_addr = (addr >> 16) & 0xff;
- dregs->dma_addr = (addr >> 8) & 0xff;
- dregs->dma_addr = (addr ) & 0xff;
-}
-
-void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length)
-{
-#if MKIV
- struct blz1230_dma_registers *dregs =
- (struct blz1230_dma_registers *) (esp->dregs);
-#else
- struct blz1230II_dma_registers *dregs =
- (struct blz1230II_dma_registers *) (esp->dregs);
-#endif
-
- cache_push(addr, length);
-
- addr >>= 1;
- addr |= BLZ1230_DMA_WRITE;
-
- /* First set latch */
- dregs->dma_latch = (addr >> 24) & 0xff;
-
- /* Then pump the address to the DMA address register */
-#if MKIV
- dregs->dma_addr = (addr >> 24) & 0xff;
-#endif
- dregs->dma_addr = (addr >> 16) & 0xff;
- dregs->dma_addr = (addr >> 8) & 0xff;
- dregs->dma_addr = (addr ) & 0xff;
-}
-
-static void dma_ints_off(struct NCR_ESP *esp)
-{
- disable_irq(esp->irq);
-}
-
-static void dma_ints_on(struct NCR_ESP *esp)
-{
- enable_irq(esp->irq);
-}
-
-static int dma_irq_p(struct NCR_ESP *esp)
-{
- return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR);
-}
-
-static int dma_ports_p(struct NCR_ESP *esp)
-{
- return ((amiga_custom.intenar) & IF_PORTS);
-}
-
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
-{
- /* On the Sparc, DMA_ST_WRITE means "move data from device to memory"
- * so when (write) is true, it actually means READ!
- */
- if(write){
- dma_init_read(esp, addr, count);
- } else {
- dma_init_write(esp, addr, count);
- }
-}
-
-#define HOSTS_C
-
-int blz1230_esp_release(struct Scsi_Host *instance)
-{
-#ifdef MODULE
- unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev;
- esp_deallocate((struct NCR_ESP *)instance->hostdata);
- esp_release();
- release_mem_region(address, sizeof(struct ESP_regs));
- free_irq(IRQ_AMIGA_PORTS, esp_intr);
-#endif
- return 1;
-}
-
-
-static struct scsi_host_template driver_template = {
- .proc_name = "esp-blz1230",
- .proc_info = esp_proc_info,
- .name = "Blizzard1230 SCSI IV",
- .detect = blz1230_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = blz1230_esp_release,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
-
-MODULE_LICENSE("GPL");
diff --git a/trunk/drivers/scsi/blz2060.c b/trunk/drivers/scsi/blz2060.c
deleted file mode 100644
index b6203ec00961..000000000000
--- a/trunk/drivers/scsi/blz2060.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/* blz2060.c: Driver for Blizzard 2060 SCSI Controller.
- *
- * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
- *
- * This driver is based on the CyberStorm driver, hence the occasional
- * reference to CyberStorm.
- */
-
-/* TODO:
- *
- * 1) Figure out how to make a cleaner merge with the sparc driver with regard
- * to the caches and the Sparc MMU mapping.
- * 2) Make as few routines required outside the generic driver. A lot of the
- * routines in this file used to be inline!
- */
-
-#include
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include "scsi.h"
-#include
-#include "NCR53C9x.h"
-
-#include
-#include
-#include
-#include
-
-#include
-
-/* The controller registers can be found in the Z2 config area at these
- * offsets:
- */
-#define BLZ2060_ESP_ADDR 0x1ff00
-#define BLZ2060_DMA_ADDR 0x1ffe0
-
-
-/* The Blizzard 2060 DMA interface
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * Only two things can be programmed in the Blizzard DMA:
- * 1) The data direction is controlled by the status of bit 31 (1 = write)
- * 2) The source/dest address (word aligned, shifted one right) in bits 30-0
- *
- * Figure out interrupt status by reading the ESP status byte.
- */
-struct blz2060_dma_registers {
- volatile unsigned char dma_led_ctrl; /* DMA led control [0x000] */
- unsigned char dmapad1[0x0f];
- volatile unsigned char dma_addr0; /* DMA address (MSB) [0x010] */
- unsigned char dmapad2[0x03];
- volatile unsigned char dma_addr1; /* DMA address [0x014] */
- unsigned char dmapad3[0x03];
- volatile unsigned char dma_addr2; /* DMA address [0x018] */
- unsigned char dmapad4[0x03];
- volatile unsigned char dma_addr3; /* DMA address (LSB) [0x01c] */
-};
-
-#define BLZ2060_DMA_WRITE 0x80000000
-
-/* DMA control bits */
-#define BLZ2060_DMA_LED 0x02 /* HD led control 1 = off */
-
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_dump_state(struct NCR_ESP *esp);
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_ints_off(struct NCR_ESP *esp);
-static void dma_ints_on(struct NCR_ESP *esp);
-static int dma_irq_p(struct NCR_ESP *esp);
-static void dma_led_off(struct NCR_ESP *esp);
-static void dma_led_on(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
-
-static volatile unsigned char cmd_buffer[16];
- /* This is where all commands are put
- * before they are transferred to the ESP chip
- * via PIO.
- */
-
-/***************************************************************** Detection */
-int __init blz2060_esp_detect(struct scsi_host_template *tpnt)
-{
- struct NCR_ESP *esp;
- struct zorro_dev *z = NULL;
- unsigned long address;
-
- if ((z = zorro_find_device(ZORRO_PROD_PHASE5_BLIZZARD_2060, z))) {
- unsigned long board = z->resource.start;
- if (request_mem_region(board+BLZ2060_ESP_ADDR,
- sizeof(struct ESP_regs), "NCR53C9x")) {
- esp = esp_allocate(tpnt, (void *)board + BLZ2060_ESP_ADDR, 0);
-
- /* Do command transfer with programmed I/O */
- esp->do_pio_cmds = 1;
-
- /* Required functions */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = &dma_init_read;
- esp->dma_init_write = &dma_init_write;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
- esp->dma_irq_p = &dma_irq_p;
- esp->dma_ports_p = &dma_ports_p;
- esp->dma_setup = &dma_setup;
-
- /* Optional functions */
- esp->dma_barrier = 0;
- esp->dma_drain = 0;
- esp->dma_invalidate = 0;
- esp->dma_irq_entry = 0;
- esp->dma_irq_exit = 0;
- esp->dma_led_on = &dma_led_on;
- esp->dma_led_off = &dma_led_off;
- esp->dma_poll = 0;
- esp->dma_reset = 0;
-
- /* SCSI chip speed */
- esp->cfreq = 40000000;
-
- /* The DMA registers on the Blizzard are mapped
- * relative to the device (i.e. in the same Zorro
- * I/O block).
- */
- address = (unsigned long)ZTWO_VADDR(board);
- esp->dregs = (void *)(address + BLZ2060_DMA_ADDR);
-
- /* ESP register base */
- esp->eregs = (struct ESP_regs *)(address + BLZ2060_ESP_ADDR);
-
- /* Set the command buffer */
- esp->esp_command = cmd_buffer;
- esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
-
- esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
- "Blizzard 2060 SCSI", esp->ehost);
-
- /* Figure out our scsi ID on the bus */
- esp->scsi_id = 7;
-
- /* We don't have a differential SCSI-bus. */
- esp->diff = 0;
-
- esp_initialize(esp);
-
- printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use);
- esps_running = esps_in_use;
- return esps_in_use;
- }
- }
- return 0;
-}
-
-/************************************************************* DMA Functions */
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
-{
- /* Since the Blizzard DMA is fully dedicated to the ESP chip,
- * the number of bytes sent (to the ESP chip) equals the number
- * of bytes in the FIFO - there is no buffering in the DMA controller.
- * XXXX Do I read this right? It is from host to ESP, right?
- */
- return fifo_count;
-}
-
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- /* I don't think there's any limit on the Blizzard DMA. So we use what
- * the ESP chip can handle (24 bit).
- */
- unsigned long sz = sp->SCp.this_residual;
- if(sz > 0x1000000)
- sz = 0x1000000;
- return sz;
-}
-
-static void dma_dump_state(struct NCR_ESP *esp)
-{
- ESPLOG(("intreq:<%04x>, intena:<%04x>\n",
- amiga_custom.intreqr, amiga_custom.intenar));
-}
-
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct blz2060_dma_registers *dregs =
- (struct blz2060_dma_registers *) (esp->dregs);
-
- cache_clear(addr, length);
-
- addr >>= 1;
- addr &= ~(BLZ2060_DMA_WRITE);
- dregs->dma_addr3 = (addr ) & 0xff;
- dregs->dma_addr2 = (addr >> 8) & 0xff;
- dregs->dma_addr1 = (addr >> 16) & 0xff;
- dregs->dma_addr0 = (addr >> 24) & 0xff;
-}
-
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct blz2060_dma_registers *dregs =
- (struct blz2060_dma_registers *) (esp->dregs);
-
- cache_push(addr, length);
-
- addr >>= 1;
- addr |= BLZ2060_DMA_WRITE;
- dregs->dma_addr3 = (addr ) & 0xff;
- dregs->dma_addr2 = (addr >> 8) & 0xff;
- dregs->dma_addr1 = (addr >> 16) & 0xff;
- dregs->dma_addr0 = (addr >> 24) & 0xff;
-}
-
-static void dma_ints_off(struct NCR_ESP *esp)
-{
- disable_irq(esp->irq);
-}
-
-static void dma_ints_on(struct NCR_ESP *esp)
-{
- enable_irq(esp->irq);
-}
-
-static int dma_irq_p(struct NCR_ESP *esp)
-{
- return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR);
-}
-
-static void dma_led_off(struct NCR_ESP *esp)
-{
- ((struct blz2060_dma_registers *) (esp->dregs))->dma_led_ctrl =
- BLZ2060_DMA_LED;
-}
-
-static void dma_led_on(struct NCR_ESP *esp)
-{
- ((struct blz2060_dma_registers *) (esp->dregs))->dma_led_ctrl = 0;
-}
-
-static int dma_ports_p(struct NCR_ESP *esp)
-{
- return ((amiga_custom.intenar) & IF_PORTS);
-}
-
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
-{
- /* On the Sparc, DMA_ST_WRITE means "move data from device to memory"
- * so when (write) is true, it actually means READ!
- */
- if(write){
- dma_init_read(esp, addr, count);
- } else {
- dma_init_write(esp, addr, count);
- }
-}
-
-#define HOSTS_C
-
-int blz2060_esp_release(struct Scsi_Host *instance)
-{
-#ifdef MODULE
- unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev;
-
- esp_deallocate((struct NCR_ESP *)instance->hostdata);
- esp_release();
- release_mem_region(address, sizeof(struct ESP_regs));
- free_irq(IRQ_AMIGA_PORTS, esp_intr);
-#endif
- return 1;
-}
-
-
-static struct scsi_host_template driver_template = {
- .proc_name = "esp-blz2060",
- .proc_info = esp_proc_info,
- .name = "Blizzard2060 SCSI",
- .detect = blz2060_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = blz2060_esp_release,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
-
-MODULE_LICENSE("GPL");
diff --git a/trunk/drivers/scsi/cyberstorm.c b/trunk/drivers/scsi/cyberstorm.c
deleted file mode 100644
index c6b98a42e89d..000000000000
--- a/trunk/drivers/scsi/cyberstorm.c
+++ /dev/null
@@ -1,377 +0,0 @@
-/* cyberstorm.c: Driver for CyberStorm SCSI Controller.
- *
- * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
- *
- * The CyberStorm SCSI driver is based on David S. Miller's ESP driver
- * for the Sparc computers.
- *
- * This work was made possible by Phase5 who willingly (and most generously)
- * supported me with hardware and all the information I needed.
- */
-
-/* TODO:
- *
- * 1) Figure out how to make a cleaner merge with the sparc driver with regard
- * to the caches and the Sparc MMU mapping.
- * 2) Make as few routines required outside the generic driver. A lot of the
- * routines in this file used to be inline!
- */
-
-#include
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include "scsi.h"
-#include
-#include "NCR53C9x.h"
-
-#include
-#include
-#include
-#include
-
-#include
-
-/* The controller registers can be found in the Z2 config area at these
- * offsets:
- */
-#define CYBER_ESP_ADDR 0xf400
-#define CYBER_DMA_ADDR 0xf800
-
-
-/* The CyberStorm DMA interface */
-struct cyber_dma_registers {
- volatile unsigned char dma_addr0; /* DMA address (MSB) [0x000] */
- unsigned char dmapad1[1];
- volatile unsigned char dma_addr1; /* DMA address [0x002] */
- unsigned char dmapad2[1];
- volatile unsigned char dma_addr2; /* DMA address [0x004] */
- unsigned char dmapad3[1];
- volatile unsigned char dma_addr3; /* DMA address (LSB) [0x006] */
- unsigned char dmapad4[0x3fb];
- volatile unsigned char cond_reg; /* DMA cond (ro) [0x402] */
-#define ctrl_reg cond_reg /* DMA control (wo) [0x402] */
-};
-
-/* DMA control bits */
-#define CYBER_DMA_LED 0x80 /* HD led control 1 = on */
-#define CYBER_DMA_WRITE 0x40 /* DMA direction. 1 = write */
-#define CYBER_DMA_Z3 0x20 /* 16 (Z2) or 32 (CHIP/Z3) bit DMA transfer */
-
-/* DMA status bits */
-#define CYBER_DMA_HNDL_INTR 0x80 /* DMA IRQ pending? */
-
-/* The bits below appears to be Phase5 Debug bits only; they were not
- * described by Phase5 so using them may seem a bit stupid...
- */
-#define CYBER_HOST_ID 0x02 /* If set, host ID should be 7, otherwise
- * it should be 6.
- */
-#define CYBER_SLOW_CABLE 0x08 /* If *not* set, assume SLOW_CABLE */
-
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_dump_state(struct NCR_ESP *esp);
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_ints_off(struct NCR_ESP *esp);
-static void dma_ints_on(struct NCR_ESP *esp);
-static int dma_irq_p(struct NCR_ESP *esp);
-static void dma_led_off(struct NCR_ESP *esp);
-static void dma_led_on(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
-
-static unsigned char ctrl_data = 0; /* Keep backup of the stuff written
- * to ctrl_reg. Always write a copy
- * to this register when writing to
- * the hardware register!
- */
-
-static volatile unsigned char cmd_buffer[16];
- /* This is where all commands are put
- * before they are transferred to the ESP chip
- * via PIO.
- */
-
-/***************************************************************** Detection */
-int __init cyber_esp_detect(struct scsi_host_template *tpnt)
-{
- struct NCR_ESP *esp;
- struct zorro_dev *z = NULL;
- unsigned long address;
-
- while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
- unsigned long board = z->resource.start;
- if ((z->id == ZORRO_PROD_PHASE5_BLIZZARD_1220_CYBERSTORM ||
- z->id == ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060) &&
- request_mem_region(board+CYBER_ESP_ADDR,
- sizeof(struct ESP_regs), "NCR53C9x")) {
- /* Figure out if this is a CyberStorm or really a
- * Fastlane/Blizzard Mk II by looking at the board size.
- * CyberStorm maps 64kB
- * (ZORRO_PROD_PHASE5_BLIZZARD_1220_CYBERSTORM does anyway)
- */
- if(z->resource.end-board != 0xffff) {
- release_mem_region(board+CYBER_ESP_ADDR,
- sizeof(struct ESP_regs));
- return 0;
- }
- esp = esp_allocate(tpnt, (void *)board + CYBER_ESP_ADDR, 0);
-
- /* Do command transfer with programmed I/O */
- esp->do_pio_cmds = 1;
-
- /* Required functions */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = &dma_init_read;
- esp->dma_init_write = &dma_init_write;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
- esp->dma_irq_p = &dma_irq_p;
- esp->dma_ports_p = &dma_ports_p;
- esp->dma_setup = &dma_setup;
-
- /* Optional functions */
- esp->dma_barrier = 0;
- esp->dma_drain = 0;
- esp->dma_invalidate = 0;
- esp->dma_irq_entry = 0;
- esp->dma_irq_exit = 0;
- esp->dma_led_on = &dma_led_on;
- esp->dma_led_off = &dma_led_off;
- esp->dma_poll = 0;
- esp->dma_reset = 0;
-
- /* SCSI chip speed */
- esp->cfreq = 40000000;
-
- /* The DMA registers on the CyberStorm are mapped
- * relative to the device (i.e. in the same Zorro
- * I/O block).
- */
- address = (unsigned long)ZTWO_VADDR(board);
- esp->dregs = (void *)(address + CYBER_DMA_ADDR);
-
- /* ESP register base */
- esp->eregs = (struct ESP_regs *)(address + CYBER_ESP_ADDR);
-
- /* Set the command buffer */
- esp->esp_command = cmd_buffer;
- esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
-
- esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
- "CyberStorm SCSI", esp->ehost);
- /* Figure out our scsi ID on the bus */
- /* The DMA cond flag contains a hardcoded jumper bit
- * which can be used to select host number 6 or 7.
- * However, even though it may change, we use a hardcoded
- * value of 7.
- */
- esp->scsi_id = 7;
-
- /* We don't have a differential SCSI-bus. */
- esp->diff = 0;
-
- esp_initialize(esp);
-
- printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use);
- esps_running = esps_in_use;
- return esps_in_use;
- }
- }
- return 0;
-}
-
-/************************************************************* DMA Functions */
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
-{
- /* Since the CyberStorm DMA is fully dedicated to the ESP chip,
- * the number of bytes sent (to the ESP chip) equals the number
- * of bytes in the FIFO - there is no buffering in the DMA controller.
- * XXXX Do I read this right? It is from host to ESP, right?
- */
- return fifo_count;
-}
-
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- /* I don't think there's any limit on the CyberDMA. So we use what
- * the ESP chip can handle (24 bit).
- */
- unsigned long sz = sp->SCp.this_residual;
- if(sz > 0x1000000)
- sz = 0x1000000;
- return sz;
-}
-
-static void dma_dump_state(struct NCR_ESP *esp)
-{
- ESPLOG(("esp%d: dma -- cond_reg<%02x>\n",
- esp->esp_id, ((struct cyber_dma_registers *)
- (esp->dregs))->cond_reg));
- ESPLOG(("intreq:<%04x>, intena:<%04x>\n",
- amiga_custom.intreqr, amiga_custom.intenar));
-}
-
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct cyber_dma_registers *dregs =
- (struct cyber_dma_registers *) esp->dregs;
-
- cache_clear(addr, length);
-
- addr &= ~(1);
- dregs->dma_addr0 = (addr >> 24) & 0xff;
- dregs->dma_addr1 = (addr >> 16) & 0xff;
- dregs->dma_addr2 = (addr >> 8) & 0xff;
- dregs->dma_addr3 = (addr ) & 0xff;
- ctrl_data &= ~(CYBER_DMA_WRITE);
-
- /* Check if physical address is outside Z2 space and of
- * block length/block aligned in memory. If this is the
- * case, enable 32 bit transfer. In all other cases, fall back
- * to 16 bit transfer.
- * Obviously 32 bit transfer should be enabled if the DMA address
- * and length are 32 bit aligned. However, this leads to some
- * strange behavior. Even 64 bit aligned addr/length fails.
- * Until I've found a reason for this, 32 bit transfer is only
- * used for full-block transfers (1kB).
- * -jskov
- */
-#if 0
- if((addr & 0x3fc) || length & 0x3ff || ((addr > 0x200000) &&
- (addr < 0xff0000)))
- ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */
- else
- ctrl_data |= CYBER_DMA_Z3; /* CHIP/Z3, do 32 bit DMA */
-#else
- ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */
-#endif
- dregs->ctrl_reg = ctrl_data;
-}
-
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct cyber_dma_registers *dregs =
- (struct cyber_dma_registers *) esp->dregs;
-
- cache_push(addr, length);
-
- addr |= 1;
- dregs->dma_addr0 = (addr >> 24) & 0xff;
- dregs->dma_addr1 = (addr >> 16) & 0xff;
- dregs->dma_addr2 = (addr >> 8) & 0xff;
- dregs->dma_addr3 = (addr ) & 0xff;
- ctrl_data |= CYBER_DMA_WRITE;
-
- /* See comment above */
-#if 0
- if((addr & 0x3fc) || length & 0x3ff || ((addr > 0x200000) &&
- (addr < 0xff0000)))
- ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */
- else
- ctrl_data |= CYBER_DMA_Z3; /* CHIP/Z3, do 32 bit DMA */
-#else
- ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */
-#endif
- dregs->ctrl_reg = ctrl_data;
-}
-
-static void dma_ints_off(struct NCR_ESP *esp)
-{
- disable_irq(esp->irq);
-}
-
-static void dma_ints_on(struct NCR_ESP *esp)
-{
- enable_irq(esp->irq);
-}
-
-static int dma_irq_p(struct NCR_ESP *esp)
-{
- /* It's important to check the DMA IRQ bit in the correct way! */
- return ((esp_read(esp->eregs->esp_status) & ESP_STAT_INTR) &&
- ((((struct cyber_dma_registers *)(esp->dregs))->cond_reg) &
- CYBER_DMA_HNDL_INTR));
-}
-
-static void dma_led_off(struct NCR_ESP *esp)
-{
- ctrl_data &= ~CYBER_DMA_LED;
- ((struct cyber_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data;
-}
-
-static void dma_led_on(struct NCR_ESP *esp)
-{
- ctrl_data |= CYBER_DMA_LED;
- ((struct cyber_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data;
-}
-
-static int dma_ports_p(struct NCR_ESP *esp)
-{
- return ((amiga_custom.intenar) & IF_PORTS);
-}
-
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
-{
- /* On the Sparc, DMA_ST_WRITE means "move data from device to memory"
- * so when (write) is true, it actually means READ!
- */
- if(write){
- dma_init_read(esp, addr, count);
- } else {
- dma_init_write(esp, addr, count);
- }
-}
-
-#define HOSTS_C
-
-int cyber_esp_release(struct Scsi_Host *instance)
-{
-#ifdef MODULE
- unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev;
-
- esp_deallocate((struct NCR_ESP *)instance->hostdata);
- esp_release();
- release_mem_region(address, sizeof(struct ESP_regs));
- free_irq(IRQ_AMIGA_PORTS, esp_intr);
-#endif
- return 1;
-}
-
-
-static struct scsi_host_template driver_template = {
- .proc_name = "esp-cyberstorm",
- .proc_info = esp_proc_info,
- .name = "CyberStorm SCSI",
- .detect = cyber_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = cyber_esp_release,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
-
-MODULE_LICENSE("GPL");
diff --git a/trunk/drivers/scsi/cyberstormII.c b/trunk/drivers/scsi/cyberstormII.c
deleted file mode 100644
index e336e853e66f..000000000000
--- a/trunk/drivers/scsi/cyberstormII.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/* cyberstormII.c: Driver for CyberStorm SCSI Mk II
- *
- * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
- *
- * This driver is based on cyberstorm.c
- */
-
-/* TODO:
- *
- * 1) Figure out how to make a cleaner merge with the sparc driver with regard
- * to the caches and the Sparc MMU mapping.
- * 2) Make as few routines required outside the generic driver. A lot of the
- * routines in this file used to be inline!
- */
-
-#include
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include "scsi.h"
-#include
-#include "NCR53C9x.h"
-
-#include
-#include
-#include
-#include
-
-#include
-
-/* The controller registers can be found in the Z2 config area at these
- * offsets:
- */
-#define CYBERII_ESP_ADDR 0x1ff03
-#define CYBERII_DMA_ADDR 0x1ff43
-
-
-/* The CyberStorm II DMA interface */
-struct cyberII_dma_registers {
- volatile unsigned char cond_reg; /* DMA cond (ro) [0x000] */
-#define ctrl_reg cond_reg /* DMA control (wo) [0x000] */
- unsigned char dmapad4[0x3f];
- volatile unsigned char dma_addr0; /* DMA address (MSB) [0x040] */
- unsigned char dmapad1[3];
- volatile unsigned char dma_addr1; /* DMA address [0x044] */
- unsigned char dmapad2[3];
- volatile unsigned char dma_addr2; /* DMA address [0x048] */
- unsigned char dmapad3[3];
- volatile unsigned char dma_addr3; /* DMA address (LSB) [0x04c] */
-};
-
-/* DMA control bits */
-#define CYBERII_DMA_LED 0x02 /* HD led control 1 = on */
-
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_dump_state(struct NCR_ESP *esp);
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_ints_off(struct NCR_ESP *esp);
-static void dma_ints_on(struct NCR_ESP *esp);
-static int dma_irq_p(struct NCR_ESP *esp);
-static void dma_led_off(struct NCR_ESP *esp);
-static void dma_led_on(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
-
-static volatile unsigned char cmd_buffer[16];
- /* This is where all commands are put
- * before they are transferred to the ESP chip
- * via PIO.
- */
-
-/***************************************************************** Detection */
-int __init cyberII_esp_detect(struct scsi_host_template *tpnt)
-{
- struct NCR_ESP *esp;
- struct zorro_dev *z = NULL;
- unsigned long address;
- struct ESP_regs *eregs;
-
- if ((z = zorro_find_device(ZORRO_PROD_PHASE5_CYBERSTORM_MK_II, z))) {
- unsigned long board = z->resource.start;
- if (request_mem_region(board+CYBERII_ESP_ADDR,
- sizeof(struct ESP_regs), "NCR53C9x")) {
- /* Do some magic to figure out if the CyberStorm Mk II
- * is equipped with a SCSI controller
- */
- address = (unsigned long)ZTWO_VADDR(board);
- eregs = (struct ESP_regs *)(address + CYBERII_ESP_ADDR);
-
- esp = esp_allocate(tpnt, (void *)board + CYBERII_ESP_ADDR, 0);
-
- esp_write(eregs->esp_cfg1, (ESP_CONFIG1_PENABLE | 7));
- udelay(5);
- if(esp_read(eregs->esp_cfg1) != (ESP_CONFIG1_PENABLE | 7)) {
- esp_deallocate(esp);
- scsi_unregister(esp->ehost);
- release_mem_region(board+CYBERII_ESP_ADDR,
- sizeof(struct ESP_regs));
- return 0; /* Bail out if address did not hold data */
- }
-
- /* Do command transfer with programmed I/O */
- esp->do_pio_cmds = 1;
-
- /* Required functions */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = &dma_init_read;
- esp->dma_init_write = &dma_init_write;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
- esp->dma_irq_p = &dma_irq_p;
- esp->dma_ports_p = &dma_ports_p;
- esp->dma_setup = &dma_setup;
-
- /* Optional functions */
- esp->dma_barrier = 0;
- esp->dma_drain = 0;
- esp->dma_invalidate = 0;
- esp->dma_irq_entry = 0;
- esp->dma_irq_exit = 0;
- esp->dma_led_on = &dma_led_on;
- esp->dma_led_off = &dma_led_off;
- esp->dma_poll = 0;
- esp->dma_reset = 0;
-
- /* SCSI chip speed */
- esp->cfreq = 40000000;
-
- /* The DMA registers on the CyberStorm are mapped
- * relative to the device (i.e. in the same Zorro
- * I/O block).
- */
- esp->dregs = (void *)(address + CYBERII_DMA_ADDR);
-
- /* ESP register base */
- esp->eregs = eregs;
-
- /* Set the command buffer */
- esp->esp_command = cmd_buffer;
- esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
-
- esp->irq = IRQ_AMIGA_PORTS;
- request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
- "CyberStorm SCSI Mk II", esp->ehost);
-
- /* Figure out our scsi ID on the bus */
- esp->scsi_id = 7;
-
- /* We don't have a differential SCSI-bus. */
- esp->diff = 0;
-
- esp_initialize(esp);
-
- printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use);
- esps_running = esps_in_use;
- return esps_in_use;
- }
- }
- return 0;
-}
-
-/************************************************************* DMA Functions */
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
-{
- /* Since the CyberStorm DMA is fully dedicated to the ESP chip,
- * the number of bytes sent (to the ESP chip) equals the number
- * of bytes in the FIFO - there is no buffering in the DMA controller.
- * XXXX Do I read this right? It is from host to ESP, right?
- */
- return fifo_count;
-}
-
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- /* I don't think there's any limit on the CyberDMA. So we use what
- * the ESP chip can handle (24 bit).
- */
- unsigned long sz = sp->SCp.this_residual;
- if(sz > 0x1000000)
- sz = 0x1000000;
- return sz;
-}
-
-static void dma_dump_state(struct NCR_ESP *esp)
-{
- ESPLOG(("esp%d: dma -- cond_reg<%02x>\n",
- esp->esp_id, ((struct cyberII_dma_registers *)
- (esp->dregs))->cond_reg));
- ESPLOG(("intreq:<%04x>, intena:<%04x>\n",
- amiga_custom.intreqr, amiga_custom.intenar));
-}
-
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct cyberII_dma_registers *dregs =
- (struct cyberII_dma_registers *) esp->dregs;
-
- cache_clear(addr, length);
-
- addr &= ~(1);
- dregs->dma_addr0 = (addr >> 24) & 0xff;
- dregs->dma_addr1 = (addr >> 16) & 0xff;
- dregs->dma_addr2 = (addr >> 8) & 0xff;
- dregs->dma_addr3 = (addr ) & 0xff;
-}
-
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct cyberII_dma_registers *dregs =
- (struct cyberII_dma_registers *) esp->dregs;
-
- cache_push(addr, length);
-
- addr |= 1;
- dregs->dma_addr0 = (addr >> 24) & 0xff;
- dregs->dma_addr1 = (addr >> 16) & 0xff;
- dregs->dma_addr2 = (addr >> 8) & 0xff;
- dregs->dma_addr3 = (addr ) & 0xff;
-}
-
-static void dma_ints_off(struct NCR_ESP *esp)
-{
- disable_irq(esp->irq);
-}
-
-static void dma_ints_on(struct NCR_ESP *esp)
-{
- enable_irq(esp->irq);
-}
-
-static int dma_irq_p(struct NCR_ESP *esp)
-{
- /* It's important to check the DMA IRQ bit in the correct way! */
- return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR);
-}
-
-static void dma_led_off(struct NCR_ESP *esp)
-{
- ((struct cyberII_dma_registers *)(esp->dregs))->ctrl_reg &= ~CYBERII_DMA_LED;
-}
-
-static void dma_led_on(struct NCR_ESP *esp)
-{
- ((struct cyberII_dma_registers *)(esp->dregs))->ctrl_reg |= CYBERII_DMA_LED;
-}
-
-static int dma_ports_p(struct NCR_ESP *esp)
-{
- return ((amiga_custom.intenar) & IF_PORTS);
-}
-
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
-{
- /* On the Sparc, DMA_ST_WRITE means "move data from device to memory"
- * so when (write) is true, it actually means READ!
- */
- if(write){
- dma_init_read(esp, addr, count);
- } else {
- dma_init_write(esp, addr, count);
- }
-}
-
-#define HOSTS_C
-
-int cyberII_esp_release(struct Scsi_Host *instance)
-{
-#ifdef MODULE
- unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev;
-
- esp_deallocate((struct NCR_ESP *)instance->hostdata);
- esp_release();
- release_mem_region(address, sizeof(struct ESP_regs));
- free_irq(IRQ_AMIGA_PORTS, esp_intr);
-#endif
- return 1;
-}
-
-
-static struct scsi_host_template driver_template = {
- .proc_name = "esp-cyberstormII",
- .proc_info = esp_proc_info,
- .name = "CyberStorm Mk II SCSI",
- .detect = cyberII_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = cyberII_esp_release,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
-
-MODULE_LICENSE("GPL");
diff --git a/trunk/drivers/scsi/dc395x.c b/trunk/drivers/scsi/dc395x.c
index 22ef3716e786..e351db6c0077 100644
--- a/trunk/drivers/scsi/dc395x.c
+++ b/trunk/drivers/scsi/dc395x.c
@@ -4267,7 +4267,7 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
const unsigned srbs_per_page = PAGE_SIZE/SEGMENTX_LEN;
int srb_idx = 0;
unsigned i = 0;
- struct SGentry *ptr;
+ struct SGentry *uninitialized_var(ptr);
for (i = 0; i < DC395x_MAX_SRB_CNT; i++)
acb->srb_array[i].segment_x = NULL;
diff --git a/trunk/drivers/scsi/dec_esp.c b/trunk/drivers/scsi/dec_esp.c
deleted file mode 100644
index d42ad663ffee..000000000000
--- a/trunk/drivers/scsi/dec_esp.c
+++ /dev/null
@@ -1,687 +0,0 @@
-/*
- * dec_esp.c: Driver for SCSI chips on IOASIC based TURBOchannel DECstations
- * and TURBOchannel PMAZ-A cards
- *
- * TURBOchannel changes by Harald Koerfgen
- * PMAZ-A support by David Airlie
- *
- * based on jazz_esp.c:
- * Copyright (C) 1997 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
- *
- * jazz_esp is based on David S. Miller's ESP driver and cyber_esp
- *
- * 20000819 - Small PMAZ-AA fixes by Florian Lohoff
- * Be warned the PMAZ-AA works currently as a single card.
- * Dont try to put multiple cards in one machine - They are
- * both detected but it may crash under high load garbling your
- * data.
- * 20001005 - Initialization fixes for 2.4.0-test9
- * Florian Lohoff
- *
- * Copyright (C) 2002, 2003, 2005, 2006 Maciej W. Rozycki
- */
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include
-#include
-#include
-#include
-
-#include
-#include
-#include
-#include
-#include
-#include
-
-#define DEC_SCSI_SREG 0
-#define DEC_SCSI_DMAREG 0x40000
-#define DEC_SCSI_SRAM 0x80000
-#define DEC_SCSI_DIAG 0xC0000
-
-#include "scsi.h"
-#include
-#include "NCR53C9x.h"
-
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
-static void dma_drain(struct NCR_ESP *esp);
-static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd *sp);
-static void dma_dump_state(struct NCR_ESP *esp);
-static void dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length);
-static void dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length);
-static void dma_ints_off(struct NCR_ESP *esp);
-static void dma_ints_on(struct NCR_ESP *esp);
-static int dma_irq_p(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write);
-static void dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp);
-static void dma_mmu_get_scsi_sgl(struct NCR_ESP *esp, struct scsi_cmnd * sp);
-static void dma_advance_sg(struct scsi_cmnd * sp);
-
-static void pmaz_dma_drain(struct NCR_ESP *esp);
-static void pmaz_dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length);
-static void pmaz_dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length);
-static void pmaz_dma_ints_off(struct NCR_ESP *esp);
-static void pmaz_dma_ints_on(struct NCR_ESP *esp);
-static void pmaz_dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write);
-static void pmaz_dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp);
-
-#define TC_ESP_RAM_SIZE 0x20000
-#define ESP_TGT_DMA_SIZE ((TC_ESP_RAM_SIZE/7) & ~(sizeof(int)-1))
-#define ESP_NCMD 7
-
-#define TC_ESP_DMAR_MASK 0x1ffff
-#define TC_ESP_DMAR_WRITE 0x80000000
-#define TC_ESP_DMA_ADDR(x) ((unsigned)(x) & TC_ESP_DMAR_MASK)
-
-u32 esp_virt_buffer;
-int scsi_current_length;
-
-volatile unsigned char cmd_buffer[16];
-volatile unsigned char pmaz_cmd_buffer[16];
- /* This is where all commands are put
- * before they are trasfered to the ESP chip
- * via PIO.
- */
-
-static irqreturn_t scsi_dma_merr_int(int, void *);
-static irqreturn_t scsi_dma_err_int(int, void *);
-static irqreturn_t scsi_dma_int(int, void *);
-
-static struct scsi_host_template dec_esp_template = {
- .module = THIS_MODULE,
- .name = "NCR53C94",
- .info = esp_info,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .proc_info = esp_proc_info,
- .proc_name = "dec_esp",
- .can_queue = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = DISABLE_CLUSTERING,
-};
-
-static struct NCR_ESP *dec_esp_platform;
-
-/***************************************************************** Detection */
-static int dec_esp_platform_probe(void)
-{
- struct NCR_ESP *esp;
- int err = 0;
-
- if (IOASIC) {
- esp = esp_allocate(&dec_esp_template, NULL, 1);
-
- /* Do command transfer with programmed I/O */
- esp->do_pio_cmds = 1;
-
- /* Required functions */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = &dma_init_read;
- esp->dma_init_write = &dma_init_write;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
- esp->dma_irq_p = &dma_irq_p;
- esp->dma_ports_p = &dma_ports_p;
- esp->dma_setup = &dma_setup;
-
- /* Optional functions */
- esp->dma_barrier = 0;
- esp->dma_drain = &dma_drain;
- esp->dma_invalidate = 0;
- esp->dma_irq_entry = 0;
- esp->dma_irq_exit = 0;
- esp->dma_poll = 0;
- esp->dma_reset = 0;
- esp->dma_led_off = 0;
- esp->dma_led_on = 0;
-
- /* virtual DMA functions */
- esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one;
- esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl;
- esp->dma_mmu_release_scsi_one = 0;
- esp->dma_mmu_release_scsi_sgl = 0;
- esp->dma_advance_sg = &dma_advance_sg;
-
-
- /* SCSI chip speed */
- esp->cfreq = 25000000;
-
- esp->dregs = 0;
-
- /* ESP register base */
- esp->eregs = (void *)CKSEG1ADDR(dec_kn_slot_base +
- IOASIC_SCSI);
-
- /* Set the command buffer */
- esp->esp_command = (volatile unsigned char *) cmd_buffer;
-
- /* get virtual dma address for command buffer */
- esp->esp_command_dvma = virt_to_phys(cmd_buffer);
-
- esp->irq = dec_interrupt[DEC_IRQ_ASC];
-
- esp->scsi_id = 7;
-
- /* Check for differential SCSI-bus */
- esp->diff = 0;
-
- err = request_irq(esp->irq, esp_intr, IRQF_DISABLED,
- "ncr53c94", esp->ehost);
- if (err)
- goto err_alloc;
- err = request_irq(dec_interrupt[DEC_IRQ_ASC_MERR],
- scsi_dma_merr_int, IRQF_DISABLED,
- "ncr53c94 error", esp->ehost);
- if (err)
- goto err_irq;
- err = request_irq(dec_interrupt[DEC_IRQ_ASC_ERR],
- scsi_dma_err_int, IRQF_DISABLED,
- "ncr53c94 overrun", esp->ehost);
- if (err)
- goto err_irq_merr;
- err = request_irq(dec_interrupt[DEC_IRQ_ASC_DMA], scsi_dma_int,
- IRQF_DISABLED, "ncr53c94 dma", esp->ehost);
- if (err)
- goto err_irq_err;
-
- esp_initialize(esp);
-
- err = scsi_add_host(esp->ehost, NULL);
- if (err) {
- printk(KERN_ERR "ESP: Unable to register adapter\n");
- goto err_irq_dma;
- }
-
- scsi_scan_host(esp->ehost);
-
- dec_esp_platform = esp;
- }
-
- return 0;
-
-err_irq_dma:
- free_irq(dec_interrupt[DEC_IRQ_ASC_DMA], esp->ehost);
-err_irq_err:
- free_irq(dec_interrupt[DEC_IRQ_ASC_ERR], esp->ehost);
-err_irq_merr:
- free_irq(dec_interrupt[DEC_IRQ_ASC_MERR], esp->ehost);
-err_irq:
- free_irq(esp->irq, esp->ehost);
-err_alloc:
- esp_deallocate(esp);
- scsi_host_put(esp->ehost);
- return err;
-}
-
-static int __init dec_esp_probe(struct device *dev)
-{
- struct NCR_ESP *esp;
- resource_size_t start, len;
- int err;
-
- esp = esp_allocate(&dec_esp_template, NULL, 1);
-
- dev_set_drvdata(dev, esp);
-
- start = to_tc_dev(dev)->resource.start;
- len = to_tc_dev(dev)->resource.end - start + 1;
-
- if (!request_mem_region(start, len, dev->bus_id)) {
- printk(KERN_ERR "%s: Unable to reserve MMIO resource\n",
- dev->bus_id);
- err = -EBUSY;
- goto err_alloc;
- }
-
- /* Store base addr into esp struct. */
- esp->slot = start;
-
- esp->dregs = 0;
- esp->eregs = (void *)CKSEG1ADDR(start + DEC_SCSI_SREG);
- esp->do_pio_cmds = 1;
-
- /* Set the command buffer. */
- esp->esp_command = (volatile unsigned char *)pmaz_cmd_buffer;
-
- /* Get virtual dma address for command buffer. */
- esp->esp_command_dvma = virt_to_phys(pmaz_cmd_buffer);
-
- esp->cfreq = tc_get_speed(to_tc_dev(dev)->bus);
-
- esp->irq = to_tc_dev(dev)->interrupt;
-
- /* Required functions. */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = &pmaz_dma_init_read;
- esp->dma_init_write = &pmaz_dma_init_write;
- esp->dma_ints_off = &pmaz_dma_ints_off;
- esp->dma_ints_on = &pmaz_dma_ints_on;
- esp->dma_irq_p = &dma_irq_p;
- esp->dma_ports_p = &dma_ports_p;
- esp->dma_setup = &pmaz_dma_setup;
-
- /* Optional functions. */
- esp->dma_barrier = 0;
- esp->dma_drain = &pmaz_dma_drain;
- esp->dma_invalidate = 0;
- esp->dma_irq_entry = 0;
- esp->dma_irq_exit = 0;
- esp->dma_poll = 0;
- esp->dma_reset = 0;
- esp->dma_led_off = 0;
- esp->dma_led_on = 0;
-
- esp->dma_mmu_get_scsi_one = pmaz_dma_mmu_get_scsi_one;
- esp->dma_mmu_get_scsi_sgl = 0;
- esp->dma_mmu_release_scsi_one = 0;
- esp->dma_mmu_release_scsi_sgl = 0;
- esp->dma_advance_sg = 0;
-
- err = request_irq(esp->irq, esp_intr, IRQF_DISABLED, "PMAZ_AA",
- esp->ehost);
- if (err) {
- printk(KERN_ERR "%s: Unable to get IRQ %d\n",
- dev->bus_id, esp->irq);
- goto err_resource;
- }
-
- esp->scsi_id = 7;
- esp->diff = 0;
- esp_initialize(esp);
-
- err = scsi_add_host(esp->ehost, dev);
- if (err) {
- printk(KERN_ERR "%s: Unable to register adapter\n",
- dev->bus_id);
- goto err_irq;
- }
-
- scsi_scan_host(esp->ehost);
-
- return 0;
-
-err_irq:
- free_irq(esp->irq, esp->ehost);
-
-err_resource:
- release_mem_region(start, len);
-
-err_alloc:
- esp_deallocate(esp);
- scsi_host_put(esp->ehost);
- return err;
-}
-
-static void __exit dec_esp_platform_remove(void)
-{
- struct NCR_ESP *esp = dec_esp_platform;
-
- free_irq(esp->irq, esp->ehost);
- esp_deallocate(esp);
- scsi_host_put(esp->ehost);
- dec_esp_platform = NULL;
-}
-
-static void __exit dec_esp_remove(struct device *dev)
-{
- struct NCR_ESP *esp = dev_get_drvdata(dev);
-
- free_irq(esp->irq, esp->ehost);
- esp_deallocate(esp);
- scsi_host_put(esp->ehost);
-}
-
-
-/************************************************************* DMA Functions */
-static irqreturn_t scsi_dma_merr_int(int irq, void *dev_id)
-{
- printk("Got unexpected SCSI DMA Interrupt! < ");
- printk("SCSI_DMA_MEMRDERR ");
- printk(">\n");
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t scsi_dma_err_int(int irq, void *dev_id)
-{
- /* empty */
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t scsi_dma_int(int irq, void *dev_id)
-{
- u32 scsi_next_ptr;
-
- scsi_next_ptr = ioasic_read(IO_REG_SCSI_DMA_P);
-
- /* next page */
- scsi_next_ptr = (((scsi_next_ptr >> 3) + PAGE_SIZE) & PAGE_MASK) << 3;
- ioasic_write(IO_REG_SCSI_DMA_BP, scsi_next_ptr);
- fast_iob();
-
- return IRQ_HANDLED;
-}
-
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
-{
- return fifo_count;
-}
-
-static void dma_drain(struct NCR_ESP *esp)
-{
- u32 nw, data0, data1, scsi_data_ptr;
- u16 *p;
-
- nw = ioasic_read(IO_REG_SCSI_SCR);
-
- /*
- * Is there something in the dma buffers left?
- */
- if (nw) {
- scsi_data_ptr = ioasic_read(IO_REG_SCSI_DMA_P) >> 3;
- p = phys_to_virt(scsi_data_ptr);
- switch (nw) {
- case 1:
- data0 = ioasic_read(IO_REG_SCSI_SDR0);
- p[0] = data0 & 0xffff;
- break;
- case 2:
- data0 = ioasic_read(IO_REG_SCSI_SDR0);
- p[0] = data0 & 0xffff;
- p[1] = (data0 >> 16) & 0xffff;
- break;
- case 3:
- data0 = ioasic_read(IO_REG_SCSI_SDR0);
- data1 = ioasic_read(IO_REG_SCSI_SDR1);
- p[0] = data0 & 0xffff;
- p[1] = (data0 >> 16) & 0xffff;
- p[2] = data1 & 0xffff;
- break;
- default:
- printk("Strange: %d words in dma buffer left\n", nw);
- break;
- }
- }
-}
-
-static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd * sp)
-{
- return sp->SCp.this_residual;
-}
-
-static void dma_dump_state(struct NCR_ESP *esp)
-{
-}
-
-static void dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length)
-{
- u32 scsi_next_ptr, ioasic_ssr;
- unsigned long flags;
-
- if (vaddress & 3)
- panic("dec_esp.c: unable to handle partial word transfers, yet...");
-
- dma_cache_wback_inv((unsigned long) phys_to_virt(vaddress), length);
-
- spin_lock_irqsave(&ioasic_ssr_lock, flags);
-
- fast_mb();
- ioasic_ssr = ioasic_read(IO_REG_SSR);
-
- ioasic_ssr &= ~IO_SSR_SCSI_DMA_EN;
- ioasic_write(IO_REG_SSR, ioasic_ssr);
-
- fast_wmb();
- ioasic_write(IO_REG_SCSI_SCR, 0);
- ioasic_write(IO_REG_SCSI_DMA_P, vaddress << 3);
-
- /* prepare for next page */
- scsi_next_ptr = ((vaddress + PAGE_SIZE) & PAGE_MASK) << 3;
- ioasic_write(IO_REG_SCSI_DMA_BP, scsi_next_ptr);
-
- ioasic_ssr |= (IO_SSR_SCSI_DMA_DIR | IO_SSR_SCSI_DMA_EN);
- fast_wmb();
- ioasic_write(IO_REG_SSR, ioasic_ssr);
-
- fast_iob();
- spin_unlock_irqrestore(&ioasic_ssr_lock, flags);
-}
-
-static void dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length)
-{
- u32 scsi_next_ptr, ioasic_ssr;
- unsigned long flags;
-
- if (vaddress & 3)
- panic("dec_esp.c: unable to handle partial word transfers, yet...");
-
- dma_cache_wback_inv((unsigned long) phys_to_virt(vaddress), length);
-
- spin_lock_irqsave(&ioasic_ssr_lock, flags);
-
- fast_mb();
- ioasic_ssr = ioasic_read(IO_REG_SSR);
-
- ioasic_ssr &= ~(IO_SSR_SCSI_DMA_DIR | IO_SSR_SCSI_DMA_EN);
- ioasic_write(IO_REG_SSR, ioasic_ssr);
-
- fast_wmb();
- ioasic_write(IO_REG_SCSI_SCR, 0);
- ioasic_write(IO_REG_SCSI_DMA_P, vaddress << 3);
-
- /* prepare for next page */
- scsi_next_ptr = ((vaddress + PAGE_SIZE) & PAGE_MASK) << 3;
- ioasic_write(IO_REG_SCSI_DMA_BP, scsi_next_ptr);
-
- ioasic_ssr |= IO_SSR_SCSI_DMA_EN;
- fast_wmb();
- ioasic_write(IO_REG_SSR, ioasic_ssr);
-
- fast_iob();
- spin_unlock_irqrestore(&ioasic_ssr_lock, flags);
-}
-
-static void dma_ints_off(struct NCR_ESP *esp)
-{
- disable_irq(dec_interrupt[DEC_IRQ_ASC_DMA]);
-}
-
-static void dma_ints_on(struct NCR_ESP *esp)
-{
- enable_irq(dec_interrupt[DEC_IRQ_ASC_DMA]);
-}
-
-static int dma_irq_p(struct NCR_ESP *esp)
-{
- return (esp->eregs->esp_status & ESP_STAT_INTR);
-}
-
-static int dma_ports_p(struct NCR_ESP *esp)
-{
- /*
- * FIXME: what's this good for?
- */
- return 1;
-}
-
-static void dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write)
-{
- /*
- * DMA_ST_WRITE means "move data from device to memory"
- * so when (write) is true, it actually means READ!
- */
- if (write)
- dma_init_read(esp, addr, count);
- else
- dma_init_write(esp, addr, count);
-}
-
-static void dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp)
-{
- sp->SCp.ptr = (char *)virt_to_phys(sp->request_buffer);
-}
-
-static void dma_mmu_get_scsi_sgl(struct NCR_ESP *esp, struct scsi_cmnd * sp)
-{
- int sz = sp->SCp.buffers_residual;
- struct scatterlist *sg = sp->SCp.buffer;
-
- while (sz >= 0) {
- sg[sz].dma_address = page_to_phys(sg[sz].page) + sg[sz].offset;
- sz--;
- }
- sp->SCp.ptr = (char *)(sp->SCp.buffer->dma_address);
-}
-
-static void dma_advance_sg(struct scsi_cmnd * sp)
-{
- sp->SCp.ptr = (char *)(sp->SCp.buffer->dma_address);
-}
-
-static void pmaz_dma_drain(struct NCR_ESP *esp)
-{
- memcpy(phys_to_virt(esp_virt_buffer),
- (void *)CKSEG1ADDR(esp->slot + DEC_SCSI_SRAM +
- ESP_TGT_DMA_SIZE),
- scsi_current_length);
-}
-
-static void pmaz_dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length)
-{
- volatile u32 *dmareg =
- (volatile u32 *)CKSEG1ADDR(esp->slot + DEC_SCSI_DMAREG);
-
- if (length > ESP_TGT_DMA_SIZE)
- length = ESP_TGT_DMA_SIZE;
-
- *dmareg = TC_ESP_DMA_ADDR(ESP_TGT_DMA_SIZE);
-
- iob();
-
- esp_virt_buffer = vaddress;
- scsi_current_length = length;
-}
-
-static void pmaz_dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length)
-{
- volatile u32 *dmareg =
- (volatile u32 *)CKSEG1ADDR(esp->slot + DEC_SCSI_DMAREG);
-
- memcpy((void *)CKSEG1ADDR(esp->slot + DEC_SCSI_SRAM +
- ESP_TGT_DMA_SIZE),
- phys_to_virt(vaddress), length);
-
- wmb();
- *dmareg = TC_ESP_DMAR_WRITE | TC_ESP_DMA_ADDR(ESP_TGT_DMA_SIZE);
-
- iob();
-}
-
-static void pmaz_dma_ints_off(struct NCR_ESP *esp)
-{
-}
-
-static void pmaz_dma_ints_on(struct NCR_ESP *esp)
-{
-}
-
-static void pmaz_dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write)
-{
- /*
- * DMA_ST_WRITE means "move data from device to memory"
- * so when (write) is true, it actually means READ!
- */
- if (write)
- pmaz_dma_init_read(esp, addr, count);
- else
- pmaz_dma_init_write(esp, addr, count);
-}
-
-static void pmaz_dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp)
-{
- sp->SCp.ptr = (char *)virt_to_phys(sp->request_buffer);
-}
-
-
-#ifdef CONFIG_TC
-static int __init dec_esp_tc_probe(struct device *dev);
-static int __exit dec_esp_tc_remove(struct device *dev);
-
-static const struct tc_device_id dec_esp_tc_table[] = {
- { "DEC ", "PMAZ-AA " },
- { }
-};
-MODULE_DEVICE_TABLE(tc, dec_esp_tc_table);
-
-static struct tc_driver dec_esp_tc_driver = {
- .id_table = dec_esp_tc_table,
- .driver = {
- .name = "dec_esp",
- .bus = &tc_bus_type,
- .probe = dec_esp_tc_probe,
- .remove = __exit_p(dec_esp_tc_remove),
- },
-};
-
-static int __init dec_esp_tc_probe(struct device *dev)
-{
- int status = dec_esp_probe(dev);
- if (!status)
- get_device(dev);
- return status;
-}
-
-static int __exit dec_esp_tc_remove(struct device *dev)
-{
- put_device(dev);
- dec_esp_remove(dev);
- return 0;
-}
-#endif
-
-static int __init dec_esp_init(void)
-{
- int status;
-
- status = tc_register_driver(&dec_esp_tc_driver);
- if (!status)
- dec_esp_platform_probe();
-
- if (nesps) {
- pr_info("ESP: Total of %d ESP hosts found, "
- "%d actually in use.\n", nesps, esps_in_use);
- esps_running = esps_in_use;
- }
-
- return status;
-}
-
-static void __exit dec_esp_exit(void)
-{
- dec_esp_platform_remove();
- tc_unregister_driver(&dec_esp_tc_driver);
-}
-
-
-module_init(dec_esp_init);
-module_exit(dec_esp_exit);
diff --git a/trunk/drivers/scsi/fastlane.c b/trunk/drivers/scsi/fastlane.c
deleted file mode 100644
index 4266a2139b5f..000000000000
--- a/trunk/drivers/scsi/fastlane.c
+++ /dev/null
@@ -1,421 +0,0 @@
-/* fastlane.c: Driver for Phase5's Fastlane SCSI Controller.
- *
- * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
- *
- * This driver is based on the CyberStorm driver, hence the occasional
- * reference to CyberStorm.
- *
- * Betatesting & crucial adjustments by
- * Patrik Rak (prak3264@ss1000.ms.mff.cuni.cz)
- *
- */
-
-/* TODO:
- *
- * o According to the doc from laire, it is required to reset the DMA when
- * the transfer is done. ATM we reset DMA just before every new
- * dma_init_(read|write).
- *
- * 1) Figure out how to make a cleaner merge with the sparc driver with regard
- * to the caches and the Sparc MMU mapping.
- * 2) Make as few routines required outside the generic driver. A lot of the
- * routines in this file used to be inline!
- */
-
-#include
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include "scsi.h"
-#include
-#include "NCR53C9x.h"
-
-#include
-#include
-
-#include
-#include
-
-#include
-
-/* Such day has just come... */
-#if 0
-/* Let this defined unless you really need to enable DMA IRQ one day */
-#define NODMAIRQ
-#endif
-
-/* The controller registers can be found in the Z2 config area at these
- * offsets:
- */
-#define FASTLANE_ESP_ADDR 0x1000001
-#define FASTLANE_DMA_ADDR 0x1000041
-
-
-/* The Fastlane DMA interface */
-struct fastlane_dma_registers {
- volatile unsigned char cond_reg; /* DMA status (ro) [0x0000] */
-#define ctrl_reg cond_reg /* DMA control (wo) [0x0000] */
- unsigned char dmapad1[0x3f];
- volatile unsigned char clear_strobe; /* DMA clear (wo) [0x0040] */
-};
-
-
-/* DMA status bits */
-#define FASTLANE_DMA_MINT 0x80
-#define FASTLANE_DMA_IACT 0x40
-#define FASTLANE_DMA_CREQ 0x20
-
-/* DMA control bits */
-#define FASTLANE_DMA_FCODE 0xa0
-#define FASTLANE_DMA_MASK 0xf3
-#define FASTLANE_DMA_LED 0x10 /* HD led control 1 = on */
-#define FASTLANE_DMA_WRITE 0x08 /* 1 = write */
-#define FASTLANE_DMA_ENABLE 0x04 /* Enable DMA */
-#define FASTLANE_DMA_EDI 0x02 /* Enable DMA IRQ ? */
-#define FASTLANE_DMA_ESI 0x01 /* Enable SCSI IRQ */
-
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
-static void dma_dump_state(struct NCR_ESP *esp);
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length);
-static void dma_init_write(struct NCR_ESP *esp, __u32 vaddr, int length);
-static void dma_ints_off(struct NCR_ESP *esp);
-static void dma_ints_on(struct NCR_ESP *esp);
-static int dma_irq_p(struct NCR_ESP *esp);
-static void dma_irq_exit(struct NCR_ESP *esp);
-static void dma_led_off(struct NCR_ESP *esp);
-static void dma_led_on(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
-
-static unsigned char ctrl_data = 0; /* Keep backup of the stuff written
- * to ctrl_reg. Always write a copy
- * to this register when writing to
- * the hardware register!
- */
-
-static volatile unsigned char cmd_buffer[16];
- /* This is where all commands are put
- * before they are transferred to the ESP chip
- * via PIO.
- */
-
-static inline void dma_clear(struct NCR_ESP *esp)
-{
- struct fastlane_dma_registers *dregs =
- (struct fastlane_dma_registers *) (esp->dregs);
- unsigned long *t;
-
- ctrl_data = (ctrl_data & FASTLANE_DMA_MASK);
- dregs->ctrl_reg = ctrl_data;
-
- t = (unsigned long *)(esp->edev);
-
- dregs->clear_strobe = 0;
- *t = 0 ;
-}
-
-/***************************************************************** Detection */
-int __init fastlane_esp_detect(struct scsi_host_template *tpnt)
-{
- struct NCR_ESP *esp;
- struct zorro_dev *z = NULL;
- unsigned long address;
-
- if ((z = zorro_find_device(ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060, z))) {
- unsigned long board = z->resource.start;
- if (request_mem_region(board+FASTLANE_ESP_ADDR,
- sizeof(struct ESP_regs), "NCR53C9x")) {
- /* Check if this is really a fastlane controller. The problem
- * is that also the cyberstorm and blizzard controllers use
- * this ID value. Fortunately only Fastlane maps in Z3 space
- */
- if (board < 0x1000000) {
- goto err_release;
- }
- esp = esp_allocate(tpnt, (void *)board + FASTLANE_ESP_ADDR, 0);
-
- /* Do command transfer with programmed I/O */
- esp->do_pio_cmds = 1;
-
- /* Required functions */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = &dma_init_read;
- esp->dma_init_write = &dma_init_write;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
- esp->dma_irq_p = &dma_irq_p;
- esp->dma_ports_p = &dma_ports_p;
- esp->dma_setup = &dma_setup;
-
- /* Optional functions */
- esp->dma_barrier = 0;
- esp->dma_drain = 0;
- esp->dma_invalidate = 0;
- esp->dma_irq_entry = 0;
- esp->dma_irq_exit = &dma_irq_exit;
- esp->dma_led_on = &dma_led_on;
- esp->dma_led_off = &dma_led_off;
- esp->dma_poll = 0;
- esp->dma_reset = 0;
-
- /* Initialize the portBits (enable IRQs) */
- ctrl_data = (FASTLANE_DMA_FCODE |
-#ifndef NODMAIRQ
- FASTLANE_DMA_EDI |
-#endif
- FASTLANE_DMA_ESI);
-
-
- /* SCSI chip clock */
- esp->cfreq = 40000000;
-
-
- /* Map the physical address space into virtual kernel space */
- address = (unsigned long)
- z_ioremap(board, z->resource.end-board+1);
-
- if(!address){
- printk("Could not remap Fastlane controller memory!");
- goto err_unregister;
- }
-
-
- /* The DMA registers on the Fastlane are mapped
- * relative to the device (i.e. in the same Zorro
- * I/O block).
- */
- esp->dregs = (void *)(address + FASTLANE_DMA_ADDR);
-
- /* ESP register base */
- esp->eregs = (struct ESP_regs *)(address + FASTLANE_ESP_ADDR);
-
- /* Board base */
- esp->edev = (void *) address;
-
- /* Set the command buffer */
- esp->esp_command = cmd_buffer;
- esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
-
- esp->irq = IRQ_AMIGA_PORTS;
- esp->slot = board+FASTLANE_ESP_ADDR;
- if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
- "Fastlane SCSI", esp->ehost)) {
- printk(KERN_WARNING "Fastlane: Could not get IRQ%d, aborting.\n", IRQ_AMIGA_PORTS);
- goto err_unmap;
- }
-
- /* Controller ID */
- esp->scsi_id = 7;
-
- /* We don't have a differential SCSI-bus. */
- esp->diff = 0;
-
- dma_clear(esp);
- esp_initialize(esp);
-
- printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use);
- esps_running = esps_in_use;
- return esps_in_use;
- }
- }
- return 0;
-
- err_unmap:
- z_iounmap((void *)address);
- err_unregister:
- scsi_unregister (esp->ehost);
- err_release:
- release_mem_region(z->resource.start+FASTLANE_ESP_ADDR,
- sizeof(struct ESP_regs));
- return 0;
-}
-
-
-/************************************************************* DMA Functions */
-static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
-{
- /* Since the Fastlane DMA is fully dedicated to the ESP chip,
- * the number of bytes sent (to the ESP chip) equals the number
- * of bytes in the FIFO - there is no buffering in the DMA controller.
- * XXXX Do I read this right? It is from host to ESP, right?
- */
- return fifo_count;
-}
-
-static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
-{
- unsigned long sz = sp->SCp.this_residual;
- if(sz > 0xfffc)
- sz = 0xfffc;
- return sz;
-}
-
-static void dma_dump_state(struct NCR_ESP *esp)
-{
- ESPLOG(("esp%d: dma -- cond_reg<%02x>\n",
- esp->esp_id, ((struct fastlane_dma_registers *)
- (esp->dregs))->cond_reg));
- ESPLOG(("intreq:<%04x>, intena:<%04x>\n",
- amiga_custom.intreqr, amiga_custom.intenar));
-}
-
-static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct fastlane_dma_registers *dregs =
- (struct fastlane_dma_registers *) (esp->dregs);
- unsigned long *t;
-
- cache_clear(addr, length);
-
- dma_clear(esp);
-
- t = (unsigned long *)((addr & 0x00ffffff) + esp->edev);
-
- dregs->clear_strobe = 0;
- *t = addr;
-
- ctrl_data = (ctrl_data & FASTLANE_DMA_MASK) | FASTLANE_DMA_ENABLE;
- dregs->ctrl_reg = ctrl_data;
-}
-
-static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length)
-{
- struct fastlane_dma_registers *dregs =
- (struct fastlane_dma_registers *) (esp->dregs);
- unsigned long *t;
-
- cache_push(addr, length);
-
- dma_clear(esp);
-
- t = (unsigned long *)((addr & 0x00ffffff) + (esp->edev));
-
- dregs->clear_strobe = 0;
- *t = addr;
-
- ctrl_data = ((ctrl_data & FASTLANE_DMA_MASK) |
- FASTLANE_DMA_ENABLE |
- FASTLANE_DMA_WRITE);
- dregs->ctrl_reg = ctrl_data;
-}
-
-
-static void dma_ints_off(struct NCR_ESP *esp)
-{
- disable_irq(esp->irq);
-}
-
-static void dma_ints_on(struct NCR_ESP *esp)
-{
- enable_irq(esp->irq);
-}
-
-static void dma_irq_exit(struct NCR_ESP *esp)
-{
- struct fastlane_dma_registers *dregs =
- (struct fastlane_dma_registers *) (esp->dregs);
-
- dregs->ctrl_reg = ctrl_data & ~(FASTLANE_DMA_EDI|FASTLANE_DMA_ESI);
-#ifdef __mc68000__
- nop();
-#endif
- dregs->ctrl_reg = ctrl_data;
-}
-
-static int dma_irq_p(struct NCR_ESP *esp)
-{
- struct fastlane_dma_registers *dregs =
- (struct fastlane_dma_registers *) (esp->dregs);
- unsigned char dma_status;
-
- dma_status = dregs->cond_reg;
-
- if(dma_status & FASTLANE_DMA_IACT)
- return 0; /* not our IRQ */
-
- /* Return non-zero if ESP requested IRQ */
- return (
-#ifndef NODMAIRQ
- (dma_status & FASTLANE_DMA_CREQ) &&
-#endif
- (!(dma_status & FASTLANE_DMA_MINT)) &&
- (esp_read(((struct ESP_regs *) (esp->eregs))->esp_status) & ESP_STAT_INTR));
-}
-
-static void dma_led_off(struct NCR_ESP *esp)
-{
- ctrl_data &= ~FASTLANE_DMA_LED;
- ((struct fastlane_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data;
-}
-
-static void dma_led_on(struct NCR_ESP *esp)
-{
- ctrl_data |= FASTLANE_DMA_LED;
- ((struct fastlane_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data;
-}
-
-static int dma_ports_p(struct NCR_ESP *esp)
-{
- return ((amiga_custom.intenar) & IF_PORTS);
-}
-
-static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
-{
- /* On the Sparc, DMA_ST_WRITE means "move data from device to memory"
- * so when (write) is true, it actually means READ!
- */
- if(write){
- dma_init_read(esp, addr, count);
- } else {
- dma_init_write(esp, addr, count);
- }
-}
-
-#define HOSTS_C
-
-int fastlane_esp_release(struct Scsi_Host *instance)
-{
-#ifdef MODULE
- unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev;
- esp_deallocate((struct NCR_ESP *)instance->hostdata);
- esp_release();
- release_mem_region(address, sizeof(struct ESP_regs));
- free_irq(IRQ_AMIGA_PORTS, esp_intr);
-#endif
- return 1;
-}
-
-
-static struct scsi_host_template driver_template = {
- .proc_name = "esp-fastlane",
- .proc_info = esp_proc_info,
- .name = "Fastlane SCSI",
- .detect = fastlane_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = fastlane_esp_release,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING
-};
-
-#include "scsi_module.c"
-
-MODULE_LICENSE("GPL");
diff --git a/trunk/drivers/scsi/iscsi_tcp.c b/trunk/drivers/scsi/iscsi_tcp.c
index b6f99dfbb038..8a178674cb18 100644
--- a/trunk/drivers/scsi/iscsi_tcp.c
+++ b/trunk/drivers/scsi/iscsi_tcp.c
@@ -629,8 +629,9 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
int rc;
if (tcp_conn->in.datalen) {
- printk(KERN_ERR "iscsi_tcp: invalid R2t with datalen %d\n",
- tcp_conn->in.datalen);
+ iscsi_conn_printk(KERN_ERR, conn,
+ "invalid R2t with datalen %d\n",
+ tcp_conn->in.datalen);
return ISCSI_ERR_DATALEN;
}
@@ -644,8 +645,9 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
iscsi_update_cmdsn(session, (struct iscsi_nopin*)rhdr);
if (!ctask->sc || session->state != ISCSI_STATE_LOGGED_IN) {
- printk(KERN_INFO "iscsi_tcp: dropping R2T itt %d in "
- "recovery...\n", ctask->itt);
+ iscsi_conn_printk(KERN_INFO, conn,
+ "dropping R2T itt %d in recovery.\n",
+ ctask->itt);
return 0;
}
@@ -655,7 +657,8 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
r2t->exp_statsn = rhdr->statsn;
r2t->data_length = be32_to_cpu(rhdr->data_length);
if (r2t->data_length == 0) {
- printk(KERN_ERR "iscsi_tcp: invalid R2T with zero data len\n");
+ iscsi_conn_printk(KERN_ERR, conn,
+ "invalid R2T with zero data len\n");
__kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t,
sizeof(void*));
return ISCSI_ERR_DATALEN;
@@ -668,9 +671,10 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
r2t->data_offset = be32_to_cpu(rhdr->data_offset);
if (r2t->data_offset + r2t->data_length > scsi_bufflen(ctask->sc)) {
- printk(KERN_ERR "iscsi_tcp: invalid R2T with data len %u at "
- "offset %u and total length %d\n", r2t->data_length,
- r2t->data_offset, scsi_bufflen(ctask->sc));
+ iscsi_conn_printk(KERN_ERR, conn,
+ "invalid R2T with data len %u at offset %u "
+ "and total length %d\n", r2t->data_length,
+ r2t->data_offset, scsi_bufflen(ctask->sc));
__kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t,
sizeof(void*));
return ISCSI_ERR_DATALEN;
@@ -736,8 +740,9 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr)
/* verify PDU length */
tcp_conn->in.datalen = ntoh24(hdr->dlength);
if (tcp_conn->in.datalen > conn->max_recv_dlength) {
- printk(KERN_ERR "iscsi_tcp: datalen %d > %d\n",
- tcp_conn->in.datalen, conn->max_recv_dlength);
+ iscsi_conn_printk(KERN_ERR, conn,
+ "iscsi_tcp: datalen %d > %d\n",
+ tcp_conn->in.datalen, conn->max_recv_dlength);
return ISCSI_ERR_DATALEN;
}
@@ -819,10 +824,12 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr)
* For now we fail until we find a vendor that needs it
*/
if (ISCSI_DEF_MAX_RECV_SEG_LEN < tcp_conn->in.datalen) {
- printk(KERN_ERR "iscsi_tcp: received buffer of len %u "
- "but conn buffer is only %u (opcode %0x)\n",
- tcp_conn->in.datalen,
- ISCSI_DEF_MAX_RECV_SEG_LEN, opcode);
+ iscsi_conn_printk(KERN_ERR, conn,
+ "iscsi_tcp: received buffer of "
+ "len %u but conn buffer is only %u "
+ "(opcode %0x)\n",
+ tcp_conn->in.datalen,
+ ISCSI_DEF_MAX_RECV_SEG_LEN, opcode);
rc = ISCSI_ERR_PROTO;
break;
}
@@ -1496,30 +1503,25 @@ iscsi_tcp_conn_create(struct iscsi_cls_session *cls_session, uint32_t conn_idx)
tcp_conn->tx_hash.tfm = crypto_alloc_hash("crc32c", 0,
CRYPTO_ALG_ASYNC);
tcp_conn->tx_hash.flags = 0;
- if (IS_ERR(tcp_conn->tx_hash.tfm)) {
- printk(KERN_ERR "Could not create connection due to crc32c "
- "loading error %ld. Make sure the crc32c module is "
- "built as a module or into the kernel\n",
- PTR_ERR(tcp_conn->tx_hash.tfm));
+ if (IS_ERR(tcp_conn->tx_hash.tfm))
goto free_tcp_conn;
- }
tcp_conn->rx_hash.tfm = crypto_alloc_hash("crc32c", 0,
CRYPTO_ALG_ASYNC);
tcp_conn->rx_hash.flags = 0;
- if (IS_ERR(tcp_conn->rx_hash.tfm)) {
- printk(KERN_ERR "Could not create connection due to crc32c "
- "loading error %ld. Make sure the crc32c module is "
- "built as a module or into the kernel\n",
- PTR_ERR(tcp_conn->rx_hash.tfm));
+ if (IS_ERR(tcp_conn->rx_hash.tfm))
goto free_tx_tfm;
- }
return cls_conn;
free_tx_tfm:
crypto_free_hash(tcp_conn->tx_hash.tfm);
free_tcp_conn:
+ iscsi_conn_printk(KERN_ERR, conn,
+ "Could not create connection due to crc32c "
+ "loading error. Make sure the crc32c "
+ "module is built as a module or into the "
+ "kernel\n");
kfree(tcp_conn);
tcp_conn_alloc_fail:
iscsi_conn_teardown(cls_conn);
@@ -1627,7 +1629,8 @@ iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session,
/* lookup for existing socket */
sock = sockfd_lookup((int)transport_eph, &err);
if (!sock) {
- printk(KERN_ERR "iscsi_tcp: sockfd_lookup failed %d\n", err);
+ iscsi_conn_printk(KERN_ERR, conn,
+ "sockfd_lookup failed %d\n", err);
return -EEXIST;
}
/*
diff --git a/trunk/drivers/scsi/libiscsi.c b/trunk/drivers/scsi/libiscsi.c
index 553168ae44f1..59f8445eab0d 100644
--- a/trunk/drivers/scsi/libiscsi.c
+++ b/trunk/drivers/scsi/libiscsi.c
@@ -160,7 +160,7 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask)
hdr->opcode = ISCSI_OP_SCSI_CMD;
hdr->flags = ISCSI_ATTR_SIMPLE;
int_to_scsilun(sc->device->lun, (struct scsi_lun *)hdr->lun);
- hdr->itt = build_itt(ctask->itt, conn->id, session->age);
+ hdr->itt = build_itt(ctask->itt, session->age);
hdr->data_length = cpu_to_be32(scsi_bufflen(sc));
hdr->cmdsn = cpu_to_be32(session->cmdsn);
session->cmdsn++;
@@ -416,8 +416,9 @@ static void iscsi_scsi_cmd_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
if (datalen < 2) {
invalid_datalen:
- printk(KERN_ERR "iscsi: Got CHECK_CONDITION but "
- "invalid data buffer size of %d\n", datalen);
+ iscsi_conn_printk(KERN_ERR, conn,
+ "Got CHECK_CONDITION but invalid data "
+ "buffer size of %d\n", datalen);
sc->result = DID_BAD_TARGET << 16;
goto out;
}
@@ -494,7 +495,7 @@ static void iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr)
mtask = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0);
if (!mtask) {
- printk(KERN_ERR "Could not send nopout\n");
+ iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n");
return;
}
@@ -522,9 +523,10 @@ static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
if (ntoh24(reject->dlength) >= sizeof(struct iscsi_hdr)) {
memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr));
itt = get_itt(rejected_pdu.itt);
- printk(KERN_ERR "itt 0x%x had pdu (op 0x%x) rejected "
- "due to DataDigest error.\n", itt,
- rejected_pdu.opcode);
+ iscsi_conn_printk(KERN_ERR, conn,
+ "itt 0x%x had pdu (op 0x%x) rejected "
+ "due to DataDigest error.\n", itt,
+ rejected_pdu.opcode);
}
}
return 0;
@@ -541,8 +543,8 @@ static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
* queuecommand or send generic. session lock must be held and verify
* itt must have been called.
*/
-int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
- char *data, int datalen)
+static int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
+ char *data, int datalen)
{
struct iscsi_session *session = conn->session;
int opcode = hdr->opcode & ISCSI_OPCODE_MASK, rc = 0;
@@ -672,7 +674,6 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
return rc;
}
-EXPORT_SYMBOL_GPL(__iscsi_complete_pdu);
int iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
char *data, int datalen)
@@ -697,18 +698,13 @@ int iscsi_verify_itt(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
if (hdr->itt != RESERVED_ITT) {
if (((__force u32)hdr->itt & ISCSI_AGE_MASK) !=
(session->age << ISCSI_AGE_SHIFT)) {
- printk(KERN_ERR "iscsi: received itt %x expected "
- "session age (%x)\n", (__force u32)hdr->itt,
- session->age & ISCSI_AGE_MASK);
+ iscsi_conn_printk(KERN_ERR, conn,
+ "received itt %x expected session "
+ "age (%x)\n", (__force u32)hdr->itt,
+ session->age & ISCSI_AGE_MASK);
return ISCSI_ERR_BAD_ITT;
}
- if (((__force u32)hdr->itt & ISCSI_CID_MASK) !=
- (conn->id << ISCSI_CID_SHIFT)) {
- printk(KERN_ERR "iscsi: received itt %x, expected "
- "CID (%x)\n", (__force u32)hdr->itt, conn->id);
- return ISCSI_ERR_BAD_ITT;
- }
itt = get_itt(hdr->itt);
} else
itt = ~0U;
@@ -717,16 +713,17 @@ int iscsi_verify_itt(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
ctask = session->cmds[itt];
if (!ctask->sc) {
- printk(KERN_INFO "iscsi: dropping ctask with "
- "itt 0x%x\n", ctask->itt);
+ iscsi_conn_printk(KERN_INFO, conn, "dropping ctask "
+ "with itt 0x%x\n", ctask->itt);
/* force drop */
return ISCSI_ERR_NO_SCSI_CMD;
}
if (ctask->sc->SCp.phase != session->age) {
- printk(KERN_ERR "iscsi: ctask's session age %d, "
- "expected %d\n", ctask->sc->SCp.phase,
- session->age);
+ iscsi_conn_printk(KERN_ERR, conn,
+ "iscsi: ctask's session age %d, "
+ "expected %d\n", ctask->sc->SCp.phase,
+ session->age);
return ISCSI_ERR_SESSION_FAILED;
}
}
@@ -771,7 +768,7 @@ static void iscsi_prep_mtask(struct iscsi_conn *conn,
*/
nop->cmdsn = cpu_to_be32(session->cmdsn);
if (hdr->itt != RESERVED_ITT) {
- hdr->itt = build_itt(mtask->itt, conn->id, session->age);
+ hdr->itt = build_itt(mtask->itt, session->age);
/*
* TODO: We always use immediate, so we never hit this.
* If we start to send tmfs or nops as non-immediate then
@@ -997,6 +994,7 @@ enum {
FAILURE_SESSION_IN_RECOVERY,
FAILURE_SESSION_RECOVERY_TIMEOUT,
FAILURE_SESSION_LOGGING_OUT,
+ FAILURE_SESSION_NOT_READY,
};
int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
@@ -1017,6 +1015,12 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
session = iscsi_hostdata(host->hostdata);
spin_lock(&session->lock);
+ reason = iscsi_session_chkready(session_to_cls(session));
+ if (reason) {
+ sc->result = reason;
+ goto fault;
+ }
+
/*
* ISCSI_STATE_FAILED is a temp. state. The recovery
* code will decide what is best to do with command queued
@@ -1033,18 +1037,23 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
switch (session->state) {
case ISCSI_STATE_IN_RECOVERY:
reason = FAILURE_SESSION_IN_RECOVERY;
- goto reject;
+ sc->result = DID_IMM_RETRY << 16;
+ break;
case ISCSI_STATE_LOGGING_OUT:
reason = FAILURE_SESSION_LOGGING_OUT;
- goto reject;
+ sc->result = DID_IMM_RETRY << 16;
+ break;
case ISCSI_STATE_RECOVERY_FAILED:
reason = FAILURE_SESSION_RECOVERY_TIMEOUT;
+ sc->result = DID_NO_CONNECT << 16;
break;
case ISCSI_STATE_TERMINATE:
reason = FAILURE_SESSION_TERMINATE;
+ sc->result = DID_NO_CONNECT << 16;
break;
default:
reason = FAILURE_SESSION_FREED;
+ sc->result = DID_NO_CONNECT << 16;
}
goto fault;
}
@@ -1052,6 +1061,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
conn = session->leadconn;
if (!conn) {
reason = FAILURE_SESSION_FREED;
+ sc->result = DID_NO_CONNECT << 16;
goto fault;
}
@@ -1091,9 +1101,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
fault:
spin_unlock(&session->lock);
- printk(KERN_ERR "iscsi: cmd 0x%x is not queued (%d)\n",
- sc->cmnd[0], reason);
- sc->result = (DID_NO_CONNECT << 16);
+ debug_scsi("iscsi: cmd 0x%x is not queued (%d)\n", sc->cmnd[0], reason);
scsi_set_resid(sc, scsi_bufflen(sc));
sc->scsi_done(sc);
spin_lock(host->host_lock);
@@ -1160,7 +1168,8 @@ int iscsi_eh_host_reset(struct scsi_cmnd *sc)
mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->lock);
if (session->state == ISCSI_STATE_LOGGED_IN)
- printk(KERN_INFO "iscsi: host reset succeeded\n");
+ iscsi_session_printk(KERN_INFO, session,
+ "host reset succeeded\n");
else
goto failed;
spin_unlock_bh(&session->lock);
@@ -1239,7 +1248,8 @@ static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn,
* Fail commands. session lock held and recv side suspended and xmit
* thread flushed
*/
-static void fail_all_commands(struct iscsi_conn *conn, unsigned lun)
+static void fail_all_commands(struct iscsi_conn *conn, unsigned lun,
+ int error)
{
struct iscsi_cmd_task *ctask, *tmp;
@@ -1251,7 +1261,7 @@ static void fail_all_commands(struct iscsi_conn *conn, unsigned lun)
if (lun == ctask->sc->device->lun || lun == -1) {
debug_scsi("failing pending sc %p itt 0x%x\n",
ctask->sc, ctask->itt);
- fail_command(conn, ctask, DID_BUS_BUSY << 16);
+ fail_command(conn, ctask, error << 16);
}
}
@@ -1259,7 +1269,7 @@ static void fail_all_commands(struct iscsi_conn *conn, unsigned lun)
if (lun == ctask->sc->device->lun || lun == -1) {
debug_scsi("failing requeued sc %p itt 0x%x\n",
ctask->sc, ctask->itt);
- fail_command(conn, ctask, DID_BUS_BUSY << 16);
+ fail_command(conn, ctask, error << 16);
}
}
@@ -1357,10 +1367,10 @@ static void iscsi_check_transport_timeouts(unsigned long data)
last_recv = conn->last_recv;
if (time_before_eq(last_recv + timeout + (conn->ping_timeout * HZ),
jiffies)) {
- printk(KERN_ERR "ping timeout of %d secs expired, "
- "last rx %lu, last ping %lu, now %lu\n",
- conn->ping_timeout, last_recv,
- conn->last_ping, jiffies);
+ iscsi_conn_printk(KERN_ERR, conn, "ping timeout of %d secs "
+ "expired, last rx %lu, last ping %lu, "
+ "now %lu\n", conn->ping_timeout, last_recv,
+ conn->last_ping, jiffies);
spin_unlock(&session->lock);
iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
return;
@@ -1373,14 +1383,11 @@ static void iscsi_check_transport_timeouts(unsigned long data)
iscsi_send_nopout(conn, NULL);
}
next_timeout = last_recv + timeout + (conn->ping_timeout * HZ);
- } else {
+ } else
next_timeout = last_recv + timeout;
- }
- if (next_timeout) {
- debug_scsi("Setting next tmo %lu\n", next_timeout);
- mod_timer(&conn->transport_timer, next_timeout);
- }
+ debug_scsi("Setting next tmo %lu\n", next_timeout);
+ mod_timer(&conn->transport_timer, next_timeout);
done:
spin_unlock(&session->lock);
}
@@ -1573,7 +1580,7 @@ int iscsi_eh_device_reset(struct scsi_cmnd *sc)
/* need to grab the recv lock then session lock */
write_lock_bh(conn->recv_lock);
spin_lock(&session->lock);
- fail_all_commands(conn, sc->device->lun);
+ fail_all_commands(conn, sc->device->lun, DID_ERROR);
conn->tmf_state = TMF_INITIAL;
spin_unlock(&session->lock);
write_unlock_bh(conn->recv_lock);
@@ -1944,9 +1951,10 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
}
spin_unlock_irqrestore(session->host->host_lock, flags);
msleep_interruptible(500);
- printk(KERN_INFO "iscsi: scsi conn_destroy(): host_busy %d "
- "host_failed %d\n", session->host->host_busy,
- session->host->host_failed);
+ iscsi_conn_printk(KERN_INFO, conn, "iscsi conn_destroy(): "
+ "host_busy %d host_failed %d\n",
+ session->host->host_busy,
+ session->host->host_failed);
/*
* force eh_abort() to unblock
*/
@@ -1975,27 +1983,28 @@ int iscsi_conn_start(struct iscsi_cls_conn *cls_conn)
struct iscsi_session *session = conn->session;
if (!session) {
- printk(KERN_ERR "iscsi: can't start unbound connection\n");
+ iscsi_conn_printk(KERN_ERR, conn,
+ "can't start unbound connection\n");
return -EPERM;
}
if ((session->imm_data_en || !session->initial_r2t_en) &&
session->first_burst > session->max_burst) {
- printk("iscsi: invalid burst lengths: "
- "first_burst %d max_burst %d\n",
- session->first_burst, session->max_burst);
+ iscsi_conn_printk(KERN_INFO, conn, "invalid burst lengths: "
+ "first_burst %d max_burst %d\n",
+ session->first_burst, session->max_burst);
return -EINVAL;
}
if (conn->ping_timeout && !conn->recv_timeout) {
- printk(KERN_ERR "iscsi: invalid recv timeout of zero "
- "Using 5 seconds\n.");
+ iscsi_conn_printk(KERN_ERR, conn, "invalid recv timeout of "
+ "zero. Using 5 seconds\n.");
conn->recv_timeout = 5;
}
if (conn->recv_timeout && !conn->ping_timeout) {
- printk(KERN_ERR "iscsi: invalid ping timeout of zero "
- "Using 5 seconds.\n");
+ iscsi_conn_printk(KERN_ERR, conn, "invalid ping timeout of "
+ "zero. Using 5 seconds.\n");
conn->ping_timeout = 5;
}
@@ -2019,11 +2028,9 @@ int iscsi_conn_start(struct iscsi_cls_conn *cls_conn)
conn->stop_stage = 0;
conn->tmf_state = TMF_INITIAL;
session->age++;
- spin_unlock_bh(&session->lock);
-
- iscsi_unblock_session(session_to_cls(session));
- wake_up(&conn->ehwait);
- return 0;
+ if (session->age == 16)
+ session->age = 0;
+ break;
case STOP_CONN_TERM:
conn->stop_stage = 0;
break;
@@ -2032,6 +2039,8 @@ int iscsi_conn_start(struct iscsi_cls_conn *cls_conn)
}
spin_unlock_bh(&session->lock);
+ iscsi_unblock_session(session_to_cls(session));
+ wake_up(&conn->ehwait);
return 0;
}
EXPORT_SYMBOL_GPL(iscsi_conn_start);
@@ -2123,7 +2132,8 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
* flush queues.
*/
spin_lock_bh(&session->lock);
- fail_all_commands(conn, -1);
+ fail_all_commands(conn, -1,
+ STOP_CONN_RECOVER ? DID_BUS_BUSY : DID_ERROR);
flush_control_queues(session, conn);
spin_unlock_bh(&session->lock);
mutex_unlock(&session->eh_mutex);
@@ -2140,7 +2150,8 @@ void iscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
iscsi_start_session_recovery(session, conn, flag);
break;
default:
- printk(KERN_ERR "iscsi: invalid stop flag %d\n", flag);
+ iscsi_conn_printk(KERN_ERR, conn,
+ "invalid stop flag %d\n", flag);
}
}
EXPORT_SYMBOL_GPL(iscsi_conn_stop);
diff --git a/trunk/drivers/scsi/mac_esp.c b/trunk/drivers/scsi/mac_esp.c
deleted file mode 100644
index bcb49021b7e2..000000000000
--- a/trunk/drivers/scsi/mac_esp.c
+++ /dev/null
@@ -1,751 +0,0 @@
-/*
- * 68k mac 53c9[46] scsi driver
- *
- * copyright (c) 1998, David Weis weisd3458@uni.edu
- *
- * debugging on Quadra 800 and 660AV Michael Schmitz, Dave Kilzer 7/98
- *
- * based loosely on cyber_esp.c
- */
-
-/* these are unused for now */
-#define myreadl(addr) (*(volatile unsigned int *) (addr))
-#define mywritel(b, addr) ((*(volatile unsigned int *) (addr)) = (b))
-
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include "scsi.h"
-#include
-#include "NCR53C9x.h"
-
-#include
-
-#include
-#include
-#include
-#include
-#include
-
-#include
-
-#include
-
-/* #define DEBUG_MAC_ESP */
-
-extern void esp_handle(struct NCR_ESP *esp);
-extern void mac_esp_intr(int irq, void *dev_id);
-
-static int dma_bytes_sent(struct NCR_ESP * esp, int fifo_count);
-static int dma_can_transfer(struct NCR_ESP * esp, Scsi_Cmnd *sp);
-static void dma_dump_state(struct NCR_ESP * esp);
-static void dma_init_read(struct NCR_ESP * esp, char * vaddress, int length);
-static void dma_init_write(struct NCR_ESP * esp, char * vaddress, int length);
-static void dma_ints_off(struct NCR_ESP * esp);
-static void dma_ints_on(struct NCR_ESP * esp);
-static int dma_irq_p(struct NCR_ESP * esp);
-static int dma_irq_p_quick(struct NCR_ESP * esp);
-static void dma_led_off(struct NCR_ESP * esp);
-static void dma_led_on(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP * esp, __u32 addr, int count, int write);
-static void dma_setup_quick(struct NCR_ESP * esp, __u32 addr, int count, int write);
-
-static int esp_dafb_dma_irq_p(struct NCR_ESP * espdev);
-static int esp_iosb_dma_irq_p(struct NCR_ESP * espdev);
-
-static volatile unsigned char cmd_buffer[16];
- /* This is where all commands are put
- * before they are transferred to the ESP chip
- * via PIO.
- */
-
-static int esp_initialized = 0;
-
-static int setup_num_esps = -1;
-static int setup_disconnect = -1;
-static int setup_nosync = -1;
-static int setup_can_queue = -1;
-static int setup_cmd_per_lun = -1;
-static int setup_sg_tablesize = -1;
-#ifdef SUPPORT_TAGS
-static int setup_use_tagged_queuing = -1;
-#endif
-static int setup_hostid = -1;
-
-/*
- * Experimental ESP inthandler; check macints.c to make sure dev_id is
- * set up properly!
- */
-
-void mac_esp_intr(int irq, void *dev_id)
-{
- struct NCR_ESP *esp = (struct NCR_ESP *) dev_id;
- int irq_p = 0;
-
- /* Handle the one ESP interrupt showing at this IRQ level. */
- if(((esp)->irq & 0xff) == irq) {
- /*
- * Debug ..
- */
- irq_p = esp->dma_irq_p(esp);
- printk("mac_esp: irq_p %x current %p disconnected %p\n",
- irq_p, esp->current_SC, esp->disconnected_SC);
-
- /*
- * Mac: if we're here, it's an ESP interrupt for sure!
- */
- if((esp->current_SC || esp->disconnected_SC)) {
- esp->dma_ints_off(esp);
-
- ESPIRQ(("I%d(", esp->esp_id));
- esp_handle(esp);
- ESPIRQ((")"));
-
- esp->dma_ints_on(esp);
- }
- }
-}
-
-/*
- * Debug hooks; use for playing with the interrupt flag testing and interrupt
- * acknowledge on the various machines
- */
-
-void scsi_esp_polled(int irq, void *dev_id)
-{
- if (esp_initialized == 0)
- return;
-
- mac_esp_intr(irq, dev_id);
-}
-
-void fake_intr(int irq, void *dev_id)
-{
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: got irq\n");
-#endif
-
- mac_esp_intr(irq, dev_id);
-}
-
-irqreturn_t fake_drq(int irq, void *dev_id)
-{
- printk("mac_esp: got drq\n");
- return IRQ_HANDLED;
-}
-
-#define DRIVER_SETUP
-
-/*
- * Function : mac_esp_setup(char *str)
- *
- * Purpose : booter command line initialization of the overrides array,
- *
- * Inputs : str - parameters, separated by commas.
- *
- * Currently unused in the new driver; need to add settable parameters to the
- * detect function.
- *
- */
-
-static int __init mac_esp_setup(char *str) {
-#ifdef DRIVER_SETUP
- /* Format of mac53c9x parameter is:
- * mac53c9x=