diff --git a/[refs] b/[refs]
index 5b6398963bcc..f3f62e0dc150 100644
--- a/[refs]
+++ b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 35d824b28fc5544d1eb7c1e3db15a1740df8ec4b
+refs/heads/master: 1e753451eb1dc97ab8bdad3ae5278301e5b981bf
diff --git a/trunk/Documentation/spi/spidev_test.c b/trunk/Documentation/spi/spidev_test.c
index 16feda901469..10abd3773e49 100644
--- a/trunk/Documentation/spi/spidev_test.c
+++ b/trunk/Documentation/spi/spidev_test.c
@@ -58,7 +58,7 @@ static void transfer(int fd)
 	};
 
 	ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
-	if (ret < 1)
+	if (ret == 1)
 		pabort("can't send spi message");
 
 	for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {
diff --git a/trunk/arch/arm/plat-omap/include/plat/usb.h b/trunk/arch/arm/plat-omap/include/plat/usb.h
index 568578db93b6..876ca8d5e927 100644
--- a/trunk/arch/arm/plat-omap/include/plat/usb.h
+++ b/trunk/arch/arm/plat-omap/include/plat/usb.h
@@ -46,7 +46,7 @@ struct ehci_hcd_omap_platform_data {
 struct omap_musb_board_data {
 	u8	interface_type;
 	u8	mode;
-	u8	power;
+	u16	power;
 };
 
 enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
diff --git a/trunk/drivers/edac/edac_mce_amd.c b/trunk/drivers/edac/edac_mce_amd.c
index 97e64bcdbc06..f5b6d9fe4def 100644
--- a/trunk/drivers/edac/edac_mce_amd.c
+++ b/trunk/drivers/edac/edac_mce_amd.c
@@ -294,6 +294,7 @@ static void amd_decode_ls_mce(u64 mc3_status)
 void amd_decode_nb_mce(int node_id, struct err_regs *regs, int handle_errors)
 {
 	u32 ec  = ERROR_CODE(regs->nbsl);
+	u32 xec = EXT_ERROR_CODE(regs->nbsl);
 
 	if (!handle_errors)
 		return;
@@ -323,7 +324,7 @@ void amd_decode_nb_mce(int node_id, struct err_regs *regs, int handle_errors)
 		pr_cont("\n");
 	}
 
-	pr_emerg("%s.\n", EXT_ERR_MSG(regs->nbsl));
+	pr_emerg("%s.\n", EXT_ERR_MSG(xec));
 
 	if (BUS_ERROR(ec) && nb_bus_decoder)
 		nb_bus_decoder(node_id, regs);
@@ -373,7 +374,7 @@ static int amd_decode_mce(struct notifier_block *nb, unsigned long val,
 		 ((m->status & MCI_STATUS_PCC) ? "yes" : "no"));
 
 	/* do the two bits[14:13] together */
-	ecc = (m->status >> 45) & 0x3;
+	ecc = m->status & (3ULL << 45);
 	if (ecc)
 		pr_cont(", %sECC Error", ((ecc == 2) ? "C" : "U"));
 
diff --git a/trunk/drivers/gpio/gpiolib.c b/trunk/drivers/gpio/gpiolib.c
index eb0c3fe44b29..76be229c814d 100644
--- a/trunk/drivers/gpio/gpiolib.c
+++ b/trunk/drivers/gpio/gpiolib.c
@@ -416,8 +416,7 @@ static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev,
 	return 0;
 
 free_sd:
-	if (pdesc)
-		sysfs_put(pdesc->value_sd);
+	sysfs_put(pdesc->value_sd);
 free_id:
 	idr_remove(&pdesc_idr, id);
 	desc->flags &= GPIO_FLAGS_MASK;
diff --git a/trunk/drivers/of/of_mdio.c b/trunk/drivers/of/of_mdio.c
index b4748337223b..18ecae4a4375 100644
--- a/trunk/drivers/of/of_mdio.c
+++ b/trunk/drivers/of/of_mdio.c
@@ -69,7 +69,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 		}
 
 		phy = get_phy_device(mdio, be32_to_cpup(addr));
-		if (!phy || IS_ERR(phy)) {
+		if (!phy) {
 			dev_err(&mdio->dev, "error probing PHY at address %i\n",
 				*addr);
 			continue;
diff --git a/trunk/drivers/serial/mpc52xx_uart.c b/trunk/drivers/serial/mpc52xx_uart.c
index a176ab4bd65b..3119fddaedb5 100644
--- a/trunk/drivers/serial/mpc52xx_uart.c
+++ b/trunk/drivers/serial/mpc52xx_uart.c
@@ -29,6 +29,39 @@
  * kind, whether express or implied.
  */
 
+/* Platform device Usage :
+ *
+ * Since PSCs can have multiple function, the correct driver for each one
+ * is selected by calling mpc52xx_match_psc_function(...). The function
+ * handled by this driver is "uart".
+ *
+ * The driver init all necessary registers to place the PSC in uart mode without
+ * DCD. However, the pin multiplexing aren't changed and should be set either
+ * by the bootloader or in the platform init code.
+ *
+ * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2,
+ * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
+ * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
+ * fpr the console code : without this 1:1 mapping, at early boot time, when we
+ * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
+ * will be mapped to.
+ */
+
+/* OF Platform device Usage :
+ *
+ * This driver is only used for PSCs configured in uart mode.  The device
+ * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible
+ * list.
+ *
+ * By default, PSC devices are enumerated in the order they are found.  However
+ * a particular PSC number can be forces by adding 'device_no = <port#>'
+ * to the device node.
+ *
+ * The driver init all necessary registers to place the PSC in uart mode without
+ * DCD. However, the pin multiplexing aren't changed and should be set either
+ * by the bootloader or in the platform init code.
+ */
+
 #undef DEBUG
 
 #include <linux/device.h>
diff --git a/trunk/drivers/spi/omap2_mcspi.c b/trunk/drivers/spi/omap2_mcspi.c
index e0de0d0eedea..d8356af118a8 100644
--- a/trunk/drivers/spi/omap2_mcspi.c
+++ b/trunk/drivers/spi/omap2_mcspi.c
@@ -204,7 +204,6 @@ static inline void mcspi_write_chconf0(const struct spi_device *spi, u32 val)
 
 	cs->chconf0 = val;
 	mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, val);
-	mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0);
 }
 
 static void omap2_mcspi_set_dma_req(const struct spi_device *spi,
@@ -533,7 +532,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
 					goto out;
 				}
 #ifdef VERBOSE
-				dev_dbg(&spi->dev, "write-%d %08x\n",
+				dev_dbg(&spi->dev, "write-%d %04x\n",
 						word_len, *tx);
 #endif
 				__raw_writel(*tx++, tx_reg);
@@ -551,7 +550,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
 					mcspi_write_chconf0(spi, l);
 				*rx++ = __raw_readl(rx_reg);
 #ifdef VERBOSE
-				dev_dbg(&spi->dev, "read-%d %08x\n",
+				dev_dbg(&spi->dev, "read-%d %04x\n",
 						word_len, *(rx - 1));
 #endif
 			}
diff --git a/trunk/drivers/spi/spi.c b/trunk/drivers/spi/spi.c
index b3a1f9259b62..9ffb0fdbd6fe 100644
--- a/trunk/drivers/spi/spi.c
+++ b/trunk/drivers/spi/spi.c
@@ -41,7 +41,7 @@ static void spidev_release(struct device *dev)
 		spi->master->cleanup(spi);
 
 	spi_master_put(spi->master);
-	kfree(spi);
+	kfree(dev);
 }
 
 static ssize_t
@@ -257,7 +257,6 @@ int spi_add_device(struct spi_device *spi)
 {
 	static DEFINE_MUTEX(spi_add_lock);
 	struct device *dev = spi->master->dev.parent;
-	struct device *d;
 	int status;
 
 	/* Chipselects are numbered 0..max; validate. */
@@ -279,11 +278,10 @@ int spi_add_device(struct spi_device *spi)
 	 */
 	mutex_lock(&spi_add_lock);
 
-	d = bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev));
-	if (d != NULL) {
+	if (bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev))
+			!= NULL) {
 		dev_err(dev, "chipselect %d already in use\n",
 				spi->chip_select);
-		put_device(d);
 		status = -EBUSY;
 		goto done;
 	}
diff --git a/trunk/fs/notify/inotify/Kconfig b/trunk/fs/notify/inotify/Kconfig
index b3a159b21cfd..3e56dbffe729 100644
--- a/trunk/fs/notify/inotify/Kconfig
+++ b/trunk/fs/notify/inotify/Kconfig
@@ -15,7 +15,6 @@ config INOTIFY
 
 config INOTIFY_USER
 	bool "Inotify support for userspace"
-	select ANON_INODES
 	select FSNOTIFY
 	default y
 	---help---