diff --git a/[refs] b/[refs] index b0d5e924a77e..29b66dccf441 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: fdf4c587a793ba87935e38e7f25a9540bc9a7b95 +refs/heads/master: ffeb414a59291d5891f09727beb793c109f19f08 diff --git a/trunk/.mailmap b/trunk/.mailmap index 1eba28acab64..581fd39193a2 100644 --- a/trunk/.mailmap +++ b/trunk/.mailmap @@ -23,7 +23,6 @@ Andy Adamson Arnaud Patard Arnd Bergmann Axel Dyks -Axel Lin Ben Gardner Ben M Cahill Björn Steinbrink diff --git a/trunk/Documentation/ABI/testing/sysfs-platform-at91 b/trunk/Documentation/ABI/testing/sysfs-platform-at91 deleted file mode 100644 index 4cc6a865ae66..000000000000 --- a/trunk/Documentation/ABI/testing/sysfs-platform-at91 +++ /dev/null @@ -1,25 +0,0 @@ -What: /sys/devices/platform/at91_can/net//mb0_id -Date: January 2011 -KernelVersion: 2.6.38 -Contact: Marc Kleine-Budde -Description: - Value representing the can_id of mailbox 0. - - Default: 0x7ff (standard frame) - - Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in - "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the - contents of mailbox 0 may be send under certain - conditions (even if disabled or in rx mode). - - The workaround in the errata suggests not to use the - mailbox and load it with an unused identifier. - - In order to use an extended can_id add the - CAN_EFF_FLAG (0x80000000U) to the can_id. Example: - - - standard id 0x7ff: - echo 0x7ff > /sys/class/net/can0/mb0_id - - - extended id 0x1fffffff: - echo 0x9fffffff > /sys/class/net/can0/mb0_id diff --git a/trunk/Documentation/filesystems/ntfs.txt b/trunk/Documentation/filesystems/ntfs.txt index 933bc66ccff1..6ef8cf3bc9a3 100644 --- a/trunk/Documentation/filesystems/ntfs.txt +++ b/trunk/Documentation/filesystems/ntfs.txt @@ -460,8 +460,6 @@ Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog. 2.1.30: - Fix writev() (it kept writing the first segment over and over again instead of moving onto subsequent segments). - - Fix crash in ntfs_mft_record_alloc() when mapping the new extent mft - record failed. 2.1.29: - Fix a deadlock when mounting read-write. 2.1.28: diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt index 89835a4766a6..b72e071a3e5b 100644 --- a/trunk/Documentation/kernel-parameters.txt +++ b/trunk/Documentation/kernel-parameters.txt @@ -43,11 +43,11 @@ parameter is applicable: AVR32 AVR32 architecture is enabled. AX25 Appropriate AX.25 support is enabled. BLACKFIN Blackfin architecture is enabled. - DRM Direct Rendering Management support is enabled. - DYNAMIC_DEBUG Build in debug messages and enable them at runtime EDD BIOS Enhanced Disk Drive Services (EDD) is enabled EFI EFI Partitioning (GPT) is enabled EIDE EIDE/ATAPI support is enabled. + DRM Direct Rendering Management support is enabled. + DYNAMIC_DEBUG Build in debug messages and enable them at runtime FB The frame buffer device is enabled. GCOV GCOV profiling is enabled. HW Appropriate hardware is enabled. diff --git a/trunk/Documentation/networking/bonding.txt b/trunk/Documentation/networking/bonding.txt index 25d2f4141d27..5dc638791d97 100644 --- a/trunk/Documentation/networking/bonding.txt +++ b/trunk/Documentation/networking/bonding.txt @@ -49,8 +49,7 @@ Table of Contents 3.3 Configuring Bonding Manually with Ifenslave 3.3.1 Configuring Multiple Bonds Manually 3.4 Configuring Bonding Manually via Sysfs -3.5 Configuration with Interfaces Support -3.6 Overriding Configuration for Special Cases +3.5 Overriding Configuration for Special Cases 4. Querying Bonding Configuration 4.1 Bonding Configuration @@ -162,8 +161,8 @@ onwards) do not have /usr/include/linux symbolically linked to the default kernel source include directory. SECOND IMPORTANT NOTE: - If you plan to configure bonding using sysfs or using the -/etc/network/interfaces file, you do not need to use ifenslave. + If you plan to configure bonding using sysfs, you do not need +to use ifenslave. 2. Bonding Driver Options ========================= @@ -780,26 +779,22 @@ resend_igmp You can configure bonding using either your distro's network initialization scripts, or manually using either ifenslave or the -sysfs interface. Distros generally use one of three packages for the -network initialization scripts: initscripts, sysconfig or interfaces. -Recent versions of these packages have support for bonding, while older +sysfs interface. Distros generally use one of two packages for the +network initialization scripts: initscripts or sysconfig. Recent +versions of these packages have support for bonding, while older versions do not. We will first describe the options for configuring bonding for -distros using versions of initscripts, sysconfig and interfaces with full -or partial support for bonding, then provide information on enabling +distros using versions of initscripts and sysconfig with full or +partial support for bonding, then provide information on enabling bonding without support from the network initialization scripts (i.e., older versions of initscripts or sysconfig). - If you're unsure whether your distro uses sysconfig, -initscripts or interfaces, or don't know if it's new enough, have no fear. + If you're unsure whether your distro uses sysconfig or +initscripts, or don't know if it's new enough, have no fear. Determining this is fairly straightforward. - First, look for a file called interfaces in /etc/network directory. -If this file is present in your system, then your system use interfaces. See -Configuration with Interfaces Support. - - Else, issue the command: + First, issue the command: $ rpm -qf /sbin/ifup @@ -1332,62 +1327,8 @@ echo 2000 > /sys/class/net/bond1/bonding/arp_interval echo +eth2 > /sys/class/net/bond1/bonding/slaves echo +eth3 > /sys/class/net/bond1/bonding/slaves -3.5 Configuration with Interfaces Support ------------------------------------------ - - This section applies to distros which use /etc/network/interfaces file -to describe network interface configuration, most notably Debian and it's -derivatives. - - The ifup and ifdown commands on Debian don't support bonding out of -the box. The ifenslave-2.6 package should be installed to provide bonding -support. Once installed, this package will provide bond-* options to be used -into /etc/network/interfaces. - - Note that ifenslave-2.6 package will load the bonding module and use -the ifenslave command when appropriate. - -Example Configurations ----------------------- - -In /etc/network/interfaces, the following stanza will configure bond0, in -active-backup mode, with eth0 and eth1 as slaves. - -auto bond0 -iface bond0 inet dhcp - bond-slaves eth0 eth1 - bond-mode active-backup - bond-miimon 100 - bond-primary eth0 eth1 - -If the above configuration doesn't work, you might have a system using -upstart for system startup. This is most notably true for recent -Ubuntu versions. The following stanza in /etc/network/interfaces will -produce the same result on those systems. - -auto bond0 -iface bond0 inet dhcp - bond-slaves none - bond-mode active-backup - bond-miimon 100 - -auto eth0 -iface eth0 inet manual - bond-master bond0 - bond-primary eth0 eth1 - -auto eth1 -iface eth1 inet manual - bond-master bond0 - bond-primary eth0 eth1 - -For a full list of bond-* supported options in /etc/network/interfaces and some -more advanced examples tailored to you particular distros, see the files in -/usr/share/doc/ifenslave-2.6. - -3.6 Overriding Configuration for Special Cases +3.5 Overriding Configuration for Special Cases ---------------------------------------------- - When using the bonding driver, the physical port which transmits a frame is typically selected by the bonding driver, and is not relevant to the user or system administrator. The output port is simply selected using the policies of diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index 445537d46e7a..cf0f3a5c09cc 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -3139,12 +3139,6 @@ S: Maintained F: net/ieee802154/ F: drivers/ieee802154/ -IKANOS/ADI EAGLE ADSL USB DRIVER -M: Matthieu Castet -M: Stanislaw Gruszka -S: Maintained -F: drivers/usb/atm/ueagle-atm.c - INTEGRITY MEASUREMENT ARCHITECTURE (IMA) M: Mimi Zohar S: Supported @@ -3333,6 +3327,7 @@ F: drivers/net/wimax/i2400m/ F: include/linux/wimax/i2400m.h INTEL WIRELESS WIFI LINK (iwlwifi) +M: Reinette Chatre M: Wey-Yi Guy M: Intel Linux Wireless L: linux-wireless@vger.kernel.org @@ -6600,16 +6595,6 @@ S: Maintained F: drivers/char/virtio_console.c F: include/linux/virtio_console.h -VIRTIO CORE, NET AND BLOCK DRIVERS -M: Rusty Russell -M: "Michael S. Tsirkin" -L: virtualization@lists.linux-foundation.org -S: Maintained -F: drivers/virtio/ -F: drivers/net/virtio_net.c -F: drivers/block/virtio_blk.c -F: include/linux/virtio_*.h - VIRTIO HOST (VHOST) M: "Michael S. Tsirkin" L: kvm@vger.kernel.org diff --git a/trunk/Makefile b/trunk/Makefile index 66e7e977ddc0..1f474953427f 100644 --- a/trunk/Makefile +++ b/trunk/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 38 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc2 NAME = Flesh-Eating Bats with Fangs # *DOCUMENTATION* diff --git a/trunk/arch/arm/include/asm/hardware/sp810.h b/trunk/arch/arm/include/asm/hardware/sp810.h index 721847dc68ab..a101f10bb5b1 100644 --- a/trunk/arch/arm/include/asm/hardware/sp810.h +++ b/trunk/arch/arm/include/asm/hardware/sp810.h @@ -50,12 +50,6 @@ #define SCPCELLID2 0xFF8 #define SCPCELLID3 0xFFC -#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15) -#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15) - -#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17) -#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17) - static inline void sysctl_soft_reset(void __iomem *base) { /* writing any value to SCSYSSTAT reg will reset system */ diff --git a/trunk/arch/arm/include/asm/io.h b/trunk/arch/arm/include/asm/io.h index d66605dea55a..20e0f7c9e03e 100644 --- a/trunk/arch/arm/include/asm/io.h +++ b/trunk/arch/arm/include/asm/io.h @@ -95,15 +95,6 @@ static inline void __iomem *__typesafe_io(unsigned long addr) return (void __iomem *)addr; } -/* IO barriers */ -#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE -#define __iormb() rmb() -#define __iowmb() wmb() -#else -#define __iormb() do { } while (0) -#define __iowmb() do { } while (0) -#endif - /* * Now, pick up the machine-defined IO definitions */ @@ -134,17 +125,17 @@ static inline void __iomem *__typesafe_io(unsigned long addr) * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. */ #ifdef __io -#define outb(v,p) ({ __iowmb(); __raw_writeb(v,__io(p)); }) -#define outw(v,p) ({ __iowmb(); __raw_writew((__force __u16) \ - cpu_to_le16(v),__io(p)); }) -#define outl(v,p) ({ __iowmb(); __raw_writel((__force __u32) \ - cpu_to_le32(v),__io(p)); }) +#define outb(v,p) __raw_writeb(v,__io(p)) +#define outw(v,p) __raw_writew((__force __u16) \ + cpu_to_le16(v),__io(p)) +#define outl(v,p) __raw_writel((__force __u32) \ + cpu_to_le32(v),__io(p)) -#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __iormb(); __v; }) +#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __v; }) #define inw(p) ({ __u16 __v = le16_to_cpu((__force __le16) \ - __raw_readw(__io(p))); __iormb(); __v; }) + __raw_readw(__io(p))); __v; }) #define inl(p) ({ __u32 __v = le32_to_cpu((__force __le32) \ - __raw_readl(__io(p))); __iormb(); __v; }) + __raw_readl(__io(p))); __v; }) #define outsb(p,d,l) __raw_writesb(__io(p),d,l) #define outsw(p,d,l) __raw_writesw(__io(p),d,l) @@ -201,6 +192,14 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define writel_relaxed(v,c) ((void)__raw_writel((__force u32) \ cpu_to_le32(v),__mem_pci(c))) +#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE +#define __iormb() rmb() +#define __iowmb() wmb() +#else +#define __iormb() do { } while (0) +#define __iowmb() do { } while (0) +#endif + #define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(); __v; }) #define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(); __v; }) #define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(); __v; }) diff --git a/trunk/arch/arm/include/asm/memory.h b/trunk/arch/arm/include/asm/memory.h index d0ee74b7cf86..23c2e8e5c0fa 100644 --- a/trunk/arch/arm/include/asm/memory.h +++ b/trunk/arch/arm/include/asm/memory.h @@ -188,7 +188,7 @@ * translation for translating DMA addresses. Use the driver * DMA support - see dma-mapping.h. */ -static inline unsigned long virt_to_phys(const volatile void *x) +static inline unsigned long virt_to_phys(void *x) { return __virt_to_phys((unsigned long)(x)); } diff --git a/trunk/arch/arm/kernel/head.S b/trunk/arch/arm/kernel/head.S index c0225da3fb21..f17d9a09e8fb 100644 --- a/trunk/arch/arm/kernel/head.S +++ b/trunk/arch/arm/kernel/head.S @@ -392,22 +392,24 @@ ENDPROC(__turn_mmu_on) #ifdef CONFIG_SMP_ON_UP __fixup_smp: - and r3, r9, #0x000f0000 @ architecture version - teq r3, #0x000f0000 @ CPU ID supported? + mov r4, #0x00070000 + orr r3, r4, #0xff000000 @ mask 0xff070000 + orr r4, r4, #0x41000000 @ val 0x41070000 + and r0, r9, r3 + teq r0, r4 @ ARM CPU and ARMv6/v7? bne __fixup_smp_on_up @ no, assume UP - bic r3, r9, #0x00ff0000 - bic r3, r3, #0x0000000f @ mask 0xff00fff0 - mov r4, #0x41000000 + orr r3, r3, #0x0000ff00 + orr r3, r3, #0x000000f0 @ mask 0xff07fff0 orr r4, r4, #0x0000b000 - orr r4, r4, #0x00000020 @ val 0x4100b020 - teq r3, r4 @ ARM 11MPCore? + orr r4, r4, #0x00000020 @ val 0x4107b020 + and r0, r9, r3 + teq r0, r4 @ ARM 11MPCore? moveq pc, lr @ yes, assume SMP mrc p15, 0, r0, c0, c0, 5 @ read MPIDR - and r0, r0, #0xc0000000 @ multiprocessing extensions and - teq r0, #0x80000000 @ not part of a uniprocessor system? - moveq pc, lr @ yes, assume SMP + tst r0, #1 << 31 + movne pc, lr @ bit 31 => SMP __fixup_smp_on_up: adr r0, 1f diff --git a/trunk/arch/arm/kernel/smp_twd.c b/trunk/arch/arm/kernel/smp_twd.c index 60636f499cb3..fd9156698ab9 100644 --- a/trunk/arch/arm/kernel/smp_twd.c +++ b/trunk/arch/arm/kernel/smp_twd.c @@ -36,7 +36,6 @@ static void twd_set_mode(enum clock_event_mode mode, /* timer load already set up */ ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_PERIODIC; - __raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD); break; case CLOCK_EVT_MODE_ONESHOT: /* period set, and timer enabled in 'next_event' hook */ @@ -82,7 +81,7 @@ int twd_timer_ack(void) static void __cpuinit twd_calibrate_rate(void) { - unsigned long count; + unsigned long load, count; u64 waitjiffies; /* @@ -117,6 +116,10 @@ static void __cpuinit twd_calibrate_rate(void) printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000, (twd_timer_rate / 1000000) % 100); } + + load = twd_timer_rate / HZ; + + __raw_writel(load, twd_base + TWD_TIMER_LOAD); } /* diff --git a/trunk/arch/arm/mach-ep93xx/gpio.c b/trunk/arch/arm/mach-ep93xx/gpio.c index bec34b834958..f3dc76fdcea8 100644 --- a/trunk/arch/arm/mach-ep93xx/gpio.c +++ b/trunk/arch/arm/mach-ep93xx/gpio.c @@ -427,13 +427,6 @@ void __init ep93xx_gpio_init(void) { int i; - /* Set Ports C, D, E, G, and H for GPIO use */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK | - EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) gpiochip_add(&ep93xx_gpio_banks[i].chip); } diff --git a/trunk/arch/arm/mach-footbridge/include/mach/debug-macro.S b/trunk/arch/arm/mach-footbridge/include/mach/debug-macro.S index 30b971d65815..3c9e0c40c679 100644 --- a/trunk/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/trunk/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -17,8 +17,8 @@ /* For NetWinder debugging */ .macro addruart, rp, rv mov \rp, #0x000003f8 - orr \rv, \rp, #0xff000000 @ virtual - orr \rp, \rp, #0x7c000000 @ physical + orr \rv, \rp, #0x7c000000 @ physical + orr \rp, \rp, #0xff000000 @ virtual .endm #define UART_SHIFT 0 diff --git a/trunk/arch/arm/mach-omap1/include/mach/entry-macro.S b/trunk/arch/arm/mach-omap1/include/mach/entry-macro.S index bfb4fb1d7382..c9be6d4d83e2 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/trunk/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -14,6 +14,19 @@ #include #include +/* + * We use __glue to avoid errors with multiple definitions of + * .globl omap_irq_flags as it's included from entry-armv.S but not + * from entry-common.S. + */ +#ifdef __glue + .pushsection .data + .globl omap_irq_flags +omap_irq_flags: + .word 0 + .popsection +#endif + .macro disable_fiq .endm diff --git a/trunk/arch/arm/mach-omap1/irq.c b/trunk/arch/arm/mach-omap1/irq.c index 731dd33bff51..47701584df35 100644 --- a/trunk/arch/arm/mach-omap1/irq.c +++ b/trunk/arch/arm/mach-omap1/irq.c @@ -57,7 +57,6 @@ struct omap_irq_bank { unsigned long wake_enable; }; -u32 omap_irq_flags; static unsigned int irq_bank_count; static struct omap_irq_bank *irq_banks; @@ -177,6 +176,7 @@ static struct irq_chip omap_irq_chip = { void __init omap_init_irq(void) { + extern unsigned int omap_irq_flags; int i, j; #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) diff --git a/trunk/arch/arm/mach-omap2/dma.c b/trunk/arch/arm/mach-omap2/dma.c index 34922b2d2e3f..d2f15f5cfd36 100644 --- a/trunk/arch/arm/mach-omap2/dma.c +++ b/trunk/arch/arm/mach-omap2/dma.c @@ -264,7 +264,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) if (IS_ERR(od)) { pr_err("%s: Cant build omap_device for %s:%s.\n", __func__, name, oh->name); - return PTR_ERR(od); + return IS_ERR(od); } mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0); diff --git a/trunk/arch/arm/mach-omap2/include/mach/entry-macro.S b/trunk/arch/arm/mach-omap2/include/mach/entry-macro.S index 81985a665cb3..befa321c4c13 100644 --- a/trunk/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/trunk/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -38,6 +38,20 @@ */ #ifdef MULTI_OMAP2 + +/* + * We use __glue to avoid errors with multiple definitions of + * .globl omap_irq_base as it's included from entry-armv.S but not + * from entry-common.S. + */ +#ifdef __glue + .pushsection .data + .globl omap_irq_base +omap_irq_base: + .word 0 + .popsection +#endif + /* * Configure the interrupt base on the first interrupt. * See also omap_irq_base_init for setting omap_irq_base. diff --git a/trunk/arch/arm/mach-omap2/io.c b/trunk/arch/arm/mach-omap2/io.c index c2032041d26f..e66687b0b9de 100644 --- a/trunk/arch/arm/mach-omap2/io.c +++ b/trunk/arch/arm/mach-omap2/io.c @@ -314,13 +314,14 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } -void __iomem *omap_irq_base; - /* * Initialize asm_irq_base for entry-macro.S */ static inline void omap_irq_base_init(void) { + extern void __iomem *omap_irq_base; + +#ifdef MULTI_OMAP2 if (cpu_is_omap24xx()) omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE); else if (cpu_is_omap34xx()) @@ -329,6 +330,7 @@ static inline void omap_irq_base_init(void) omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE); else pr_err("Could not initialize omap_irq_base\n"); +#endif } void __init omap2_init_common_infrastructure(void) diff --git a/trunk/arch/arm/mach-omap2/mux.c b/trunk/arch/arm/mach-omap2/mux.c index fae49d12bc76..df8d2f2872c6 100644 --- a/trunk/arch/arm/mach-omap2/mux.c +++ b/trunk/arch/arm/mach-omap2/mux.c @@ -160,7 +160,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, struct omap_mux *mux = NULL; struct omap_mux_entry *e; const char *mode_name; - int found = 0, found_mode = 0, mode0_len = 0; + int found = 0, found_mode, mode0_len = 0; struct list_head *muxmodes = &partition->muxmodes; mode_name = strchr(muxname, '.'); diff --git a/trunk/arch/arm/mach-omap2/pm24xx.c b/trunk/arch/arm/mach-omap2/pm24xx.c index 97feb3ab6a69..9e5dc8ed51e9 100644 --- a/trunk/arch/arm/mach-omap2/pm24xx.c +++ b/trunk/arch/arm/mach-omap2/pm24xx.c @@ -134,7 +134,7 @@ static void omap2_enter_full_retention(void) /* Block console output in case it is on one of the OMAP UARTs */ if (!is_suspending()) - if (!console_trylock()) + if (try_acquire_console_sem()) goto no_sleep; omap_uart_prepare_idle(0); @@ -151,7 +151,7 @@ static void omap2_enter_full_retention(void) omap_uart_resume_idle(0); if (!is_suspending()) - console_unlock(); + release_console_sem(); no_sleep: if (omap2_pm_debug) { diff --git a/trunk/arch/arm/mach-omap2/pm34xx.c b/trunk/arch/arm/mach-omap2/pm34xx.c index a4aa1920a75c..8cbbeade4b8a 100644 --- a/trunk/arch/arm/mach-omap2/pm34xx.c +++ b/trunk/arch/arm/mach-omap2/pm34xx.c @@ -398,7 +398,7 @@ void omap_sram_idle(void) if (!is_suspending()) if (per_next_state < PWRDM_POWER_ON || core_next_state < PWRDM_POWER_ON) - if (!console_trylock()) + if (try_acquire_console_sem()) goto console_still_active; /* PER */ @@ -481,7 +481,7 @@ void omap_sram_idle(void) } if (!is_suspending()) - console_unlock(); + release_console_sem(); console_still_active: /* Disable IO-PAD and IO-CHAIN wakeup */ diff --git a/trunk/arch/arm/mach-omap2/serial.c b/trunk/arch/arm/mach-omap2/serial.c index 32e91a9c8b6b..302da7403a10 100644 --- a/trunk/arch/arm/mach-omap2/serial.c +++ b/trunk/arch/arm/mach-omap2/serial.c @@ -812,7 +812,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) oh->dev_attr = uart; - console_lock(); /* in case the earlycon is on the UART */ + acquire_console_sem(); /* in case the earlycon is on the UART */ /* * Because of early UART probing, UART did not get idled @@ -838,7 +838,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) omap_uart_block_sleep(uart); uart->timeout = DEFAULT_TIMEOUT; - console_unlock(); + release_console_sem(); if ((cpu_is_omap34xx() && uart->padconf) || (uart->wk_en && uart->wk_mask)) { diff --git a/trunk/arch/arm/mach-realview/Kconfig b/trunk/arch/arm/mach-realview/Kconfig index 7ca138a943a9..b4575ae9648e 100644 --- a/trunk/arch/arm/mach-realview/Kconfig +++ b/trunk/arch/arm/mach-realview/Kconfig @@ -2,56 +2,52 @@ menu "RealView platform type" depends on ARCH_REALVIEW config MACH_REALVIEW_EB - bool "Support RealView(R) Emulation Baseboard" + bool "Support RealView/EB platform" select ARM_GIC help - Include support for the ARM(R) RealView(R) Emulation Baseboard - platform. + Include support for the ARM(R) RealView Emulation Baseboard platform. config REALVIEW_EB_A9MP - bool "Support Multicore Cortex-A9 Tile" + bool "Support Multicore Cortex-A9" depends on MACH_REALVIEW_EB select CPU_V7 help - Enable support for the Cortex-A9MPCore tile fitted to the - Realview(R) Emulation Baseboard platform. + Enable support for the Cortex-A9MPCore tile on the Realview platform. config REALVIEW_EB_ARM11MP - bool "Support ARM11MPCore Tile" + bool "Support ARM11MPCore tile" depends on MACH_REALVIEW_EB select CPU_V6 select ARCH_HAS_BARRIERS if SMP help - Enable support for the ARM11MPCore tile fitted to the Realview(R) - Emulation Baseboard platform. + Enable support for the ARM11MPCore tile on the Realview platform. config REALVIEW_EB_ARM11MP_REVB - bool "Support ARM11MPCore RevB Tile" + bool "Support ARM11MPCore RevB tile" depends on REALVIEW_EB_ARM11MP help - Enable support for the ARM11MPCore Revision B tile on the - Realview(R) Emulation Baseboard platform. Since there are device - address differences, a kernel built with this option enabled is - not compatible with other revisions of the ARM11MPCore tile. + Enable support for the ARM11MPCore RevB tile on the Realview + platform. Since there are device address differences, a + kernel built with this option enabled is not compatible with + other revisions of the ARM11MPCore tile. config MACH_REALVIEW_PB11MP - bool "Support RealView(R) Platform Baseboard for ARM11MPCore" + bool "Support RealView/PB11MPCore platform" select CPU_V6 select ARM_GIC select HAVE_PATA_PLATFORM select ARCH_HAS_BARRIERS if SMP help - Include support for the ARM(R) RealView(R) Platform Baseboard for - the ARM11MPCore. This platform has an on-board ARM11MPCore and has + Include support for the ARM(R) RealView MPCore Platform Baseboard. + PB11MPCore is a platform with an on-board ARM11MPCore and has support for PCI-E and Compact Flash. config MACH_REALVIEW_PB1176 - bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" + bool "Support RealView/PB1176 platform" select CPU_V6 select ARM_GIC help - Include support for the ARM(R) RealView(R) Platform Baseboard for - ARM1176JZF-S. + Include support for the ARM(R) RealView ARM1176 Platform Baseboard. config REALVIEW_PB1176_SECURE_FLASH bool "Allow access to the secure flash memory block" @@ -63,24 +59,23 @@ config REALVIEW_PB1176_SECURE_FLASH block (64MB @ 0x3c000000) is required. config MACH_REALVIEW_PBA8 - bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform" + bool "Support RealView/PB-A8 platform" select CPU_V7 select ARM_GIC select HAVE_PATA_PLATFORM help - Include support for the ARM(R) RealView Platform Baseboard for - Cortex(tm)-A8. This platform has an on-board Cortex-A8 and has - support for PCI-E and Compact Flash. + Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard. + PB-A8 is a platform with an on-board Cortex-A8 and has support for + PCI-E and Compact Flash. config MACH_REALVIEW_PBX - bool "Support RealView(R) Platform Baseboard Explore" + bool "Support RealView/PBX platform" select ARM_GIC select HAVE_PATA_PLATFORM select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET select ZONE_DMA if SPARSEMEM help - Include support for the ARM(R) RealView(R) Platform Baseboard - Explore. + Include support for the ARM(R) RealView PBX platform. config REALVIEW_HIGH_PHYS_OFFSET bool "High physical base address for the RealView platform" diff --git a/trunk/arch/arm/mach-realview/platsmp.c b/trunk/arch/arm/mach-realview/platsmp.c index 6959d13d908a..a22bf67f2f78 100644 --- a/trunk/arch/arm/mach-realview/platsmp.c +++ b/trunk/arch/arm/mach-realview/platsmp.c @@ -41,7 +41,7 @@ volatile int __cpuinitdata pen_release = -1; * observers, irrespective of whether they're taking part in coherency * or not. This is necessary for the hotplug code to work reliably. */ -static void __cpuinit write_pen_release(int val) +static void write_pen_release(int val) { pen_release = val; smp_wmb(); diff --git a/trunk/arch/arm/mach-shmobile/Kconfig b/trunk/arch/arm/mach-shmobile/Kconfig index 0c8f6cf3e948..4d1b4c5c9389 100644 --- a/trunk/arch/arm/mach-shmobile/Kconfig +++ b/trunk/arch/arm/mach-shmobile/Kconfig @@ -60,8 +60,6 @@ endchoice config MACH_AG5EVM bool "AG5EVM board" - select ARCH_REQUIRE_GPIOLIB - select SH_LCD_MIPI_DSI depends on ARCH_SH73A0 config MACH_MACKEREL diff --git a/trunk/arch/arm/mach-shmobile/board-ag5evm.c b/trunk/arch/arm/mach-shmobile/board-ag5evm.c index 2123b96b5638..c18a740a4159 100644 --- a/trunk/arch/arm/mach-shmobile/board-ag5evm.c +++ b/trunk/arch/arm/mach-shmobile/board-ag5evm.c @@ -34,10 +34,9 @@ #include #include #include -#include -#include