diff --git a/[refs] b/[refs] index ccf4fa58780f..3ce6197ede1f 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 0dd4b21f517e138ea113db255645fbae1bf5eef3 +refs/heads/master: 6edad161cd4dfe1df772e7a74ab63cab53b5e8c1 diff --git a/trunk/Documentation/CodingStyle b/trunk/Documentation/CodingStyle index ce5d2c038cf5..6d2412ec91ed 100644 --- a/trunk/Documentation/CodingStyle +++ b/trunk/Documentation/CodingStyle @@ -155,7 +155,83 @@ problem, which is called the function-growth-hormone-imbalance syndrome. See next chapter. - Chapter 5: Functions + Chapter 5: Typedefs + +Please don't use things like "vps_t". + +It's a _mistake_ to use typedef for structures and pointers. When you see a + + vps_t a; + +in the source, what does it mean? + +In contrast, if it says + + struct virtual_container *a; + +you can actually tell what "a" is. + +Lots of people think that typedefs "help readability". Not so. They are +useful only for: + + (a) totally opaque objects (where the typedef is actively used to _hide_ + what the object is). + + Example: "pte_t" etc. opaque objects that you can only access using + the proper accessor functions. + + NOTE! Opaqueness and "accessor functions" are not good in themselves. + The reason we have them for things like pte_t etc. is that there + really is absolutely _zero_ portably accessible information there. + + (b) Clear integer types, where the abstraction _helps_ avoid confusion + whether it is "int" or "long". + + u8/u16/u32 are perfectly fine typedefs, although they fit into + category (d) better than here. + + NOTE! Again - there needs to be a _reason_ for this. If something is + "unsigned long", then there's no reason to do + + typedef unsigned long myflags_t; + + but if there is a clear reason for why it under certain circumstances + might be an "unsigned int" and under other configurations might be + "unsigned long", then by all means go ahead and use a typedef. + + (c) when you use sparse to literally create a _new_ type for + type-checking. + + (d) New types which are identical to standard C99 types, in certain + exceptional circumstances. + + Although it would only take a short amount of time for the eyes and + brain to become accustomed to the standard types like 'uint32_t', + some people object to their use anyway. + + Therefore, the Linux-specific 'u8/u16/u32/u64' types and their + signed equivalents which are identical to standard types are + permitted -- although they are not mandatory in new code of your + own. + + When editing existing code which already uses one or the other set + of types, you should conform to the existing choices in that code. + + (e) Types safe for use in userspace. + + In certain structures which are visible to userspace, we cannot + require C99 types and cannot use the 'u32' form above. Thus, we + use __u32 and similar types in all structures which are shared + with userspace. + +Maybe there are other cases too, but the rule should basically be to NEVER +EVER use a typedef unless you can clearly match one of those rules. + +In general, a pointer, or a struct that has elements that can reasonably +be directly accessed should _never_ be a typedef. + + + Chapter 6: Functions Functions should be short and sweet, and do just one thing. They should fit on one or two screenfuls of text (the ISO/ANSI screen size is 80x24, @@ -183,7 +259,7 @@ and it gets confused. You know you're brilliant, but maybe you'd like to understand what you did 2 weeks from now. - Chapter 6: Centralized exiting of functions + Chapter 7: Centralized exiting of functions Albeit deprecated by some people, the equivalent of the goto statement is used frequently by compilers in form of the unconditional jump instruction. @@ -220,7 +296,7 @@ out: return result; } - Chapter 7: Commenting + Chapter 8: Commenting Comments are good, but there is also a danger of over-commenting. NEVER try to explain HOW your code works in a comment: it's much better to @@ -240,7 +316,7 @@ When commenting the kernel API functions, please use the kerneldoc format. See the files Documentation/kernel-doc-nano-HOWTO.txt and scripts/kernel-doc for details. - Chapter 8: You've made a mess of it + Chapter 9: You've made a mess of it That's OK, we all do. You've probably been told by your long-time Unix user helper that "GNU emacs" automatically formats the C sources for @@ -288,7 +364,7 @@ re-formatting you may want to take a look at the man page. But remember: "indent" is not a fix for bad programming. - Chapter 9: Configuration-files + Chapter 10: Configuration-files For configuration options (arch/xxx/Kconfig, and all the Kconfig files), somewhat different indentation is used. @@ -313,7 +389,7 @@ support for file-systems, for instance) should be denoted (DANGEROUS), other experimental options should be denoted (EXPERIMENTAL). - Chapter 10: Data structures + Chapter 11: Data structures Data structures that have visibility outside the single-threaded environment they are created and destroyed in should always have @@ -344,7 +420,7 @@ Remember: if another thread can find your data structure, and you don't have a reference count on it, you almost certainly have a bug. - Chapter 11: Macros, Enums and RTL + Chapter 12: Macros, Enums and RTL Names of macros defining constants and labels in enums are capitalized. @@ -399,7 +475,7 @@ The cpp manual deals with macros exhaustively. The gcc internals manual also covers RTL which is used frequently with assembly language in the kernel. - Chapter 12: Printing kernel messages + Chapter 13: Printing kernel messages Kernel developers like to be seen as literate. Do mind the spelling of kernel messages to make a good impression. Do not use crippled @@ -410,7 +486,7 @@ Kernel messages do not have to be terminated with a period. Printing numbers in parentheses (%d) adds no value and should be avoided. - Chapter 13: Allocating memory + Chapter 14: Allocating memory The kernel provides the following general purpose memory allocators: kmalloc(), kzalloc(), kcalloc(), and vmalloc(). Please refer to the API @@ -429,7 +505,7 @@ from void pointer to any other pointer type is guaranteed by the C programming language. - Chapter 14: The inline disease + Chapter 15: The inline disease There appears to be a common misperception that gcc has a magic "make me faster" speedup option called "inline". While the use of inlines can be @@ -457,7 +533,7 @@ something it would have done anyway. - Chapter 15: References + Appendix I: References The C Programming Language, Second Edition by Brian W. Kernighan and Dennis M. Ritchie. @@ -481,4 +557,4 @@ Kernel CodingStyle, by greg@kroah.com at OLS 2002: http://www.kroah.com/linux/talks/ols_2002_kernel_codingstyle_talk/html/ -- -Last updated on 30 December 2005 by a community effort on LKML. +Last updated on 30 April 2006. diff --git a/trunk/Documentation/DocBook/kernel-api.tmpl b/trunk/Documentation/DocBook/kernel-api.tmpl index ca02e04a906c..31b727ceb127 100644 --- a/trunk/Documentation/DocBook/kernel-api.tmpl +++ b/trunk/Documentation/DocBook/kernel-api.tmpl @@ -117,6 +117,7 @@ X!Ilib/string.c Memory Management in Linux The Slab Cache +!Iinclude/linux/slab.h !Emm/slab.c User Space Memory Access @@ -331,6 +332,18 @@ X!Earch/i386/kernel/mca.c !Esecurity/security.c + + Audit Interfaces +!Ekernel/audit.c +!Ikernel/auditsc.c +!Ikernel/auditfilter.c + + + + Accounting Framework +!Ikernel/acct.c + + Power Management !Ekernel/power/pm.c diff --git a/trunk/Documentation/RCU/whatisRCU.txt b/trunk/Documentation/RCU/whatisRCU.txt index 07cb93b82ba9..6e459420ee9f 100644 --- a/trunk/Documentation/RCU/whatisRCU.txt +++ b/trunk/Documentation/RCU/whatisRCU.txt @@ -790,7 +790,6 @@ RCU pointer update: RCU grace period: - synchronize_kernel (deprecated) synchronize_net synchronize_sched synchronize_rcu diff --git a/trunk/Documentation/SubmitChecklist b/trunk/Documentation/SubmitChecklist new file mode 100644 index 000000000000..8230098da529 --- /dev/null +++ b/trunk/Documentation/SubmitChecklist @@ -0,0 +1,57 @@ +Linux Kernel patch sumbittal checklist +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Here are some basic things that developers should do if they +want to see their kernel patch submittals accepted quicker. + +These are all above and beyond the documentation that is provided +in Documentation/SubmittingPatches and elsewhere about submitting +Linux kernel patches. + + + +- Builds cleanly with applicable or modified CONFIG options =y, =m, and =n. + No gcc warnings/errors, no linker warnings/errors. + +- Passes allnoconfig, allmodconfig + +- Builds on multiple CPU arch-es by using local cross-compile tools + or something like PLM at OSDL. + +- ppc64 is a good architecture for cross-compilation checking because it + tends to use `unsigned long' for 64-bit quantities. + +- Matches kernel coding style(!) + +- Any new or modified CONFIG options don't muck up the config menu. + +- All new Kconfig options have help text. + +- Has been carefully reviewed with respect to relevant Kconfig + combinations. This is very hard to get right with testing -- + brainpower pays off here. + +- Check cleanly with sparse. + +- Use 'make checkstack' and 'make namespacecheck' and fix any + problems that they find. Note: checkstack does not point out + problems explicitly, but any one function that uses more than + 512 bytes on the stack is a candidate for change. + +- Include kernel-doc to document global kernel APIs. (Not required + for static functions, but OK there also.) Use 'make htmldocs' + or 'make mandocs' to check the kernel-doc and fix any issues. + +- Has been tested with CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT, + CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES, + CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_SPINLOCK_SLEEP all simultaneously + enabled. + +- Has been build- and runtime tested with and without CONFIG_SMP and + CONFIG_PREEMPT. + +- If the patch affects IO/Disk, etc: has been tested with and without + CONFIG_LBD. + + +2006-APR-27 diff --git a/trunk/Documentation/devices.txt b/trunk/Documentation/devices.txt index b369a8c46a73..b2f593fc76ca 100644 --- a/trunk/Documentation/devices.txt +++ b/trunk/Documentation/devices.txt @@ -3,7 +3,7 @@ Maintained by Torben Mathiasen - Last revised: 25 January 2005 + Last revised: 01 March 2006 This list is the Linux Device List, the official registry of allocated device numbers and /dev directory nodes for the Linux operating @@ -94,7 +94,6 @@ Your cooperation is appreciated. 9 = /dev/urandom Faster, less secure random number gen. 10 = /dev/aio Asyncronous I/O notification interface 11 = /dev/kmsg Writes to this come out as printk's - 12 = /dev/oldmem Access to crash dump from kexec kernel 1 block RAM disk 0 = /dev/ram0 First RAM disk 1 = /dev/ram1 Second RAM disk @@ -262,13 +261,13 @@ Your cooperation is appreciated. NOTE: These devices permit both read and write access. 7 block Loopback devices - 0 = /dev/loop0 First loopback device - 1 = /dev/loop1 Second loopback device + 0 = /dev/loop0 First loop device + 1 = /dev/loop1 Second loop device ... - The loopback devices are used to mount filesystems not + The loop devices are used to mount filesystems not associated with block devices. The binding to the - loopback devices is handled by mount(8) or losetup(8). + loop devices is handled by mount(8) or losetup(8). 8 block SCSI disk devices (0-15) 0 = /dev/sda First SCSI disk whole disk @@ -943,7 +942,7 @@ Your cooperation is appreciated. 240 = /dev/ftlp FTL on 16th Memory Technology Device Partitions are handled in the same way as for IDE - disks (see major number 3) expect that the partition + disks (see major number 3) except that the partition limit is 15 rather than 63 per disk (same as SCSI.) 45 char isdn4linux ISDN BRI driver @@ -1168,7 +1167,7 @@ Your cooperation is appreciated. The filename of the encrypted container and the passwords are sent via ioctls (using the sdmount tool) to the master node which then activates them via one of the - /dev/scramdisk/x nodes for loopback mounting (all handled + /dev/scramdisk/x nodes for loop mounting (all handled through the sdmount tool). Requested by: andy@scramdisklinux.org @@ -2538,18 +2537,32 @@ Your cooperation is appreciated. 0 = /dev/usb/lp0 First USB printer ... 15 = /dev/usb/lp15 16th USB printer - 16 = /dev/usb/mouse0 First USB mouse - ... - 31 = /dev/usb/mouse15 16th USB mouse - 32 = /dev/usb/ez0 First USB firmware loader - ... - 47 = /dev/usb/ez15 16th USB firmware loader 48 = /dev/usb/scanner0 First USB scanner ... 63 = /dev/usb/scanner15 16th USB scanner 64 = /dev/usb/rio500 Diamond Rio 500 65 = /dev/usb/usblcd USBLCD Interface (info@usblcd.de) 66 = /dev/usb/cpad0 Synaptics cPad (mouse/LCD) + 96 = /dev/usb/hiddev0 1st USB HID device + ... + 111 = /dev/usb/hiddev15 16th USB HID device + 112 = /dev/usb/auer0 1st auerswald ISDN device + ... + 127 = /dev/usb/auer15 16th auerswald ISDN device + 128 = /dev/usb/brlvgr0 First Braille Voyager device + ... + 131 = /dev/usb/brlvgr3 Fourth Braille Voyager device + 132 = /dev/usb/idmouse ID Mouse (fingerprint scanner) device + 133 = /dev/usb/sisusbvga1 First SiSUSB VGA device + ... + 140 = /dev/usb/sisusbvga8 Eigth SISUSB VGA device + 144 = /dev/usb/lcd USB LCD device + 160 = /dev/usb/legousbtower0 1st USB Legotower device + ... + 175 = /dev/usb/legousbtower15 16th USB Legotower device + 240 = /dev/usb/dabusb0 First daubusb device + ... + 243 = /dev/usb/dabusb3 Fourth dabusb device 180 block USB block devices 0 = /dev/uba First USB block device @@ -2710,6 +2723,17 @@ Your cooperation is appreciated. 1 = /dev/cpu/1/msr MSRs on CPU 1 ... +202 block Xen Virtual Block Device + 0 = /dev/xvda First Xen VBD whole disk + 16 = /dev/xvdb Second Xen VBD whole disk + 32 = /dev/xvdc Third Xen VBD whole disk + ... + 240 = /dev/xvdp Sixteenth Xen VBD whole disk + + Partitions are handled in the same way as for IDE + disks (see major number 3) except that the limit on + partitions is 15. + 203 char CPU CPUID information 0 = /dev/cpu/0/cpuid CPUID on CPU 0 1 = /dev/cpu/1/cpuid CPUID on CPU 1 @@ -2747,11 +2771,26 @@ Your cooperation is appreciated. 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0 ... 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5 - 50 = /dev/ttyIOC40 Altix serial card + 50 = /dev/ttyIOC0 Altix serial card + ... + 81 = /dev/ttyIOC31 Altix serial card + 82 = /dev/ttyVR0 NEC VR4100 series SIU + 83 = /dev/ttyVR1 NEC VR4100 series DSIU + 84 = /dev/ttyIOC84 Altix ioc4 serial card + ... + 115 = /dev/ttyIOC115 Altix ioc4 serial card + 116 = /dev/ttySIOC0 Altix ioc3 serial card + ... + 147 = /dev/ttySIOC31 Altix ioc3 serial card + 148 = /dev/ttyPSC0 PPC PSC - port 0 + ... + 153 = /dev/ttyPSC5 PPC PSC - port 5 + 154 = /dev/ttyAT0 ATMEL serial port 0 ... - 81 = /dev/ttyIOC431 Altix serial card - 82 = /dev/ttyVR0 NEC VR4100 series SIU - 83 = /dev/ttyVR1 NEC VR4100 series DSIU + 169 = /dev/ttyAT15 ATMEL serial port 15 + 170 = /dev/ttyNX0 Hilscher netX serial port 0 + ... + 185 = /dev/ttyNX15 Hilscher netX serial port 15 205 char Low-density serial ports (alternate device) 0 = /dev/culu0 Callout device for ttyLU0 @@ -2786,8 +2825,8 @@ Your cooperation is appreciated. 50 = /dev/cuioc40 Callout device for ttyIOC40 ... 81 = /dev/cuioc431 Callout device for ttyIOC431 - 82 = /dev/cuvr0 Callout device for ttyVR0 - 83 = /dev/cuvr1 Callout device for ttyVR1 + 82 = /dev/cuvr0 Callout device for ttyVR0 + 83 = /dev/cuvr1 Callout device for ttyVR1 206 char OnStream SC-x0 tape devices @@ -2897,7 +2936,6 @@ Your cooperation is appreciated. ... 196 = /dev/dvb/adapter3/video0 first video decoder of fourth card - 216 char Bluetooth RFCOMM TTY devices 0 = /dev/rfcomm0 First Bluetooth RFCOMM TTY device 1 = /dev/rfcomm1 Second Bluetooth RFCOMM TTY device @@ -3002,12 +3040,43 @@ Your cooperation is appreciated. ioctl()'s can be used to rewind the tape regardless of the device used to access it. -231 char InfiniBand MAD +231 char InfiniBand 0 = /dev/infiniband/umad0 1 = /dev/infiniband/umad1 - ... + ... + 63 = /dev/infiniband/umad63 63rd InfiniBandMad device + 64 = /dev/infiniband/issm0 First InfiniBand IsSM device + 65 = /dev/infiniband/issm1 Second InfiniBand IsSM device + ... + 127 = /dev/infiniband/issm63 63rd InfiniBand IsSM device + 128 = /dev/infiniband/uverbs0 First InfiniBand verbs device + 129 = /dev/infiniband/uverbs1 Second InfiniBand verbs device + ... + 159 = /dev/infiniband/uverbs31 31st InfiniBand verbs device + +232 char Biometric Devices + 0 = /dev/biometric/sensor0/fingerprint first fingerprint sensor on first device + 1 = /dev/biometric/sensor0/iris first iris sensor on first device + 2 = /dev/biometric/sensor0/retina first retina sensor on first device + 3 = /dev/biometric/sensor0/voiceprint first voiceprint sensor on first device + 4 = /dev/biometric/sensor0/facial first facial sensor on first device + 5 = /dev/biometric/sensor0/hand first hand sensor on first device + ... + 10 = /dev/biometric/sensor1/fingerprint first fingerprint sensor on second device + ... + 20 = /dev/biometric/sensor2/fingerprint first fingerprint sensor on third device + ... -232-239 UNASSIGNED +233 char PathScale InfiniPath interconnect + 0 = /dev/ipath Primary device for programs (any unit) + 1 = /dev/ipath0 Access specifically to unit 0 + 2 = /dev/ipath1 Access specifically to unit 1 + ... + 4 = /dev/ipath3 Access specifically to unit 3 + 129 = /dev/ipath_sma Device used by Subnet Management Agent + 130 = /dev/ipath_diag Device used by diagnostics programs + +234-239 UNASSIGNED 240-254 char LOCAL/EXPERIMENTAL USE 240-254 block LOCAL/EXPERIMENTAL USE @@ -3021,6 +3090,24 @@ Your cooperation is appreciated. This major is reserved to assist the expansion to a larger number space. No device nodes with this major should ever be created on the filesystem. + (This is probaly not true anymore, but I'll leave it + for now /Torben) + +---LARGE MAJORS!!!!!--- + +256 char Equinox SST multi-port serial boards + 0 = /dev/ttyEQ0 First serial port on first Equinox SST board + 127 = /dev/ttyEQ127 Last serial port on first Equinox SST board + 128 = /dev/ttyEQ128 First serial port on second Equinox SST board + ... + 1027 = /dev/ttyEQ1027 Last serial port on eighth Equinox SST board + +256 block Resident Flash Disk Flash Translation Layer + 0 = /dev/rfda First RFD FTL layer + 16 = /dev/rfdb Second RFD FTL layer + ... + 240 = /dev/rfdp 16th RFD FTL layer + **** ADDITIONAL /dev DIRECTORY ENTRIES diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt index f7293297f326..027285d0c26c 100644 --- a/trunk/Documentation/feature-removal-schedule.txt +++ b/trunk/Documentation/feature-removal-schedule.txt @@ -33,21 +33,6 @@ Who: Adrian Bunk --------------------------- -What: RCU API moves to EXPORT_SYMBOL_GPL -When: April 2006 -Files: include/linux/rcupdate.h, kernel/rcupdate.c -Why: Outside of Linux, the only implementations of anything even - vaguely resembling RCU that I am aware of are in DYNIX/ptx, - VM/XA, Tornado, and K42. I do not expect anyone to port binary - drivers or kernel modules from any of these, since the first two - are owned by IBM and the last two are open-source research OSes. - So these will move to GPL after a grace period to allow - people, who might be using implementations that I am not aware - of, to adjust to this upcoming change. -Who: Paul E. McKenney - ---------------------------- - What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN When: November 2006 Why: Deprecated in favour of the new ioctl-based rawiso interface, which is diff --git a/trunk/Documentation/filesystems/Locking b/trunk/Documentation/filesystems/Locking index 1045da582b9b..d31efbbdfe50 100644 --- a/trunk/Documentation/filesystems/Locking +++ b/trunk/Documentation/filesystems/Locking @@ -99,7 +99,7 @@ prototypes: int (*sync_fs)(struct super_block *sb, int wait); void (*write_super_lockfs) (struct super_block *); void (*unlockfs) (struct super_block *); - int (*statfs) (struct super_block *, struct kstatfs *); + int (*statfs) (struct dentry *, struct kstatfs *); int (*remount_fs) (struct super_block *, int *, char *); void (*clear_inode) (struct inode *); void (*umount_begin) (struct super_block *); @@ -142,15 +142,16 @@ see also dquot_operations section. --------------------------- file_system_type --------------------------- prototypes: - struct super_block *(*get_sb) (struct file_system_type *, int, - const char *, void *); + struct int (*get_sb) (struct file_system_type *, int, + const char *, void *, struct vfsmount *); void (*kill_sb) (struct super_block *); locking rules: may block BKL get_sb yes yes kill_sb yes yes -->get_sb() returns error or a locked superblock (exclusive on ->s_umount). +->get_sb() returns error or 0 with locked superblock attached to the vfsmount +(exclusive on ->s_umount). ->kill_sb() takes a write-locked superblock, does all shutdown work on it, unlocks and drops the reference. diff --git a/trunk/Documentation/filesystems/porting b/trunk/Documentation/filesystems/porting index 2f388460cbe7..5531694059ab 100644 --- a/trunk/Documentation/filesystems/porting +++ b/trunk/Documentation/filesystems/porting @@ -50,10 +50,11 @@ Turn your foo_read_super() into a function that would return 0 in case of success and negative number in case of error (-EINVAL unless you have more informative error value to report). Call it foo_fill_super(). Now declare -struct super_block foo_get_sb(struct file_system_type *fs_type, - int flags, const char *dev_name, void *data) +int foo_get_sb(struct file_system_type *fs_type, + int flags, const char *dev_name, void *data, struct vfsmount *mnt) { - return get_sb_bdev(fs_type, flags, dev_name, data, ext2_fill_super); + return get_sb_bdev(fs_type, flags, dev_name, data, foo_fill_super, + mnt); } (or similar with s/bdev/nodev/ or s/bdev/single/, depending on the kind of diff --git a/trunk/Documentation/filesystems/vfs.txt b/trunk/Documentation/filesystems/vfs.txt index 3a2e5520c1e3..9d3aed628bc1 100644 --- a/trunk/Documentation/filesystems/vfs.txt +++ b/trunk/Documentation/filesystems/vfs.txt @@ -113,8 +113,8 @@ members are defined: struct file_system_type { const char *name; int fs_flags; - struct super_block *(*get_sb) (struct file_system_type *, int, - const char *, void *); + struct int (*get_sb) (struct file_system_type *, int, + const char *, void *, struct vfsmount *); void (*kill_sb) (struct super_block *); struct module *owner; struct file_system_type * next; @@ -211,7 +211,7 @@ struct super_operations { int (*sync_fs)(struct super_block *sb, int wait); void (*write_super_lockfs) (struct super_block *); void (*unlockfs) (struct super_block *); - int (*statfs) (struct super_block *, struct kstatfs *); + int (*statfs) (struct dentry *, struct kstatfs *); int (*remount_fs) (struct super_block *, int *, char *); void (*clear_inode) (struct inode *); void (*umount_begin) (struct super_block *); diff --git a/trunk/Documentation/ia64/aliasing.txt b/trunk/Documentation/ia64/aliasing.txt new file mode 100644 index 000000000000..38f9a52d1820 --- /dev/null +++ b/trunk/Documentation/ia64/aliasing.txt @@ -0,0 +1,208 @@ + MEMORY ATTRIBUTE ALIASING ON IA-64 + + Bjorn Helgaas + + May 4, 2006 + + +MEMORY ATTRIBUTES + + Itanium supports several attributes for virtual memory references. + The attribute is part of the virtual translation, i.e., it is + contained in the TLB entry. The ones of most interest to the Linux + kernel are: + + WB Write-back (cacheable) + UC Uncacheable + WC Write-coalescing + + System memory typically uses the WB attribute. The UC attribute is + used for memory-mapped I/O devices. The WC attribute is uncacheable + like UC is, but writes may be delayed and combined to increase + performance for things like frame buffers. + + The Itanium architecture requires that we avoid accessing the same + page with both a cacheable mapping and an uncacheable mapping[1]. + + The design of the chipset determines which attributes are supported + on which regions of the address space. For example, some chipsets + support either WB or UC access to main memory, while others support + only WB access. + +MEMORY MAP + + Platform firmware describes the physical memory map and the + supported attributes for each region. At boot-time, the kernel uses + the EFI GetMemoryMap() interface. ACPI can also describe memory + devices and the attributes they support, but Linux/ia64 currently + doesn't use this information. + + The kernel uses the efi_memmap table returned from GetMemoryMap() to + learn the attributes supported by each region of physical address + space. Unfortunately, this table does not completely describe the + address space because some machines omit some or all of the MMIO + regions from the map. + + The kernel maintains another table, kern_memmap, which describes the + memory Linux is actually using and the attribute for each region. + This contains only system memory; it does not contain MMIO space. + + The kern_memmap table typically contains only a subset of the system + memory described by the efi_memmap. Linux/ia64 can't use all memory + in the system because of constraints imposed by the identity mapping + scheme. + + The efi_memmap table is preserved unmodified because the original + boot-time information is required for kexec. + +KERNEL IDENTITY MAPPINGS + + Linux/ia64 identity mappings are done with large pages, currently + either 16MB or 64MB, referred to as "granules." Cacheable mappings + are speculative[2], so the processor can read any location in the + page at any time, independent of the programmer's intentions. This + means that to avoid attribute aliasing, Linux can create a cacheable + identity mapping only when the entire granule supports cacheable + access. + + Therefore, kern_memmap contains only full granule-sized regions that + can referenced safely by an identity mapping. + + Uncacheable mappings are not speculative, so the processor will + generate UC accesses only to locations explicitly referenced by + software. This allows UC identity mappings to cover granules that + are only partially populated, or populated with a combination of UC + and WB regions. + +USER MAPPINGS + + User mappings are typically done with 16K or 64K pages. The smaller + page size allows more flexibility because only 16K or 64K has to be + homogeneous with respect to memory attributes. + +POTENTIAL ATTRIBUTE ALIASING CASES + + There are several ways the kernel creates new mappings: + + mmap of /dev/mem + + This uses remap_pfn_range(), which creates user mappings. These + mappings may be either WB or UC. If the region being mapped + happens to be in kern_memmap, meaning that it may also be mapped + by a kernel identity mapping, the user mapping must use the same + attribute as the kernel mapping. + + If the region is not in kern_memmap, the user mapping should use + an attribute reported as being supported in the EFI memory map. + + Since the EFI memory map does not describe MMIO on some + machines, this should use an uncacheable mapping as a fallback. + + mmap of /sys/class/pci_bus/.../legacy_mem + + This is very similar to mmap of /dev/mem, except that legacy_mem + only allows mmap of the one megabyte "legacy MMIO" area for a + specific PCI bus. Typically this is the first megabyte of + physical address space, but it may be different on machines with + several VGA devices. + + "X" uses this to access VGA frame buffers. Using legacy_mem + rather than /dev/mem allows multiple instances of X to talk to + different VGA cards. + + The /dev/mem mmap constraints apply. + + However, since this is for mapping legacy MMIO space, WB access + does not make sense. This matters on machines without legacy + VGA support: these machines may have WB memory for the entire + first megabyte (or even the entire first granule). + + On these machines, we could mmap legacy_mem as WB, which would + be safe in terms of attribute aliasing, but X has no way of + knowing that it is accessing regular memory, not a frame buffer, + so the kernel should fail the mmap rather than doing it with WB. + + read/write of /dev/mem + + This uses copy_from_user(), which implicitly uses a kernel + identity mapping. This is obviously safe for things in + kern_memmap. + + There may be corner cases of things that are not in kern_memmap, + but could be accessed this way. For example, registers in MMIO + space are not in kern_memmap, but could be accessed with a UC + mapping. This would not cause attribute aliasing. But + registers typically can be accessed only with four-byte or + eight-byte accesses, and the copy_from_user() path doesn't allow + any control over the access size, so this would be dangerous. + + ioremap() + + This returns a kernel identity mapping for use inside the + kernel. + + If the region is in kern_memmap, we should use the attribute + specified there. Otherwise, if the EFI memory map reports that + the entire granule supports WB, we should use that (granules + that are partially reserved or occupied by firmware do not appear + in kern_memmap). Otherwise, we should use a UC mapping. + +PAST PROBLEM CASES + + mmap of various MMIO regions from /dev/mem by "X" on Intel platforms + + The EFI memory map may not report these MMIO regions. + + These must be allowed so that X will work. This means that + when the EFI memory map is incomplete, every /dev/mem mmap must + succeed. It may create either WB or UC user mappings, depending + on whether the region is in kern_memmap or the EFI memory map. + + mmap of 0x0-0xA0000 /dev/mem by "hwinfo" on HP sx1000 with VGA enabled + + See https://bugzilla.novell.com/show_bug.cgi?id=140858. + + The EFI memory map reports the following attributes: + 0x00000-0x9FFFF WB only + 0xA0000-0xBFFFF UC only (VGA frame buffer) + 0xC0000-0xFFFFF WB only + + This mmap is done with user pages, not kernel identity mappings, + so it is safe to use WB mappings. + + The kernel VGA driver may ioremap the VGA frame buffer at 0xA0000, + which will use a granule-sized UC mapping covering 0-0xFFFFF. This + granule covers some WB-only memory, but since UC is non-speculative, + the processor will never generate an uncacheable reference to the + WB-only areas unless the driver explicitly touches them. + + mmap of 0x0-0xFFFFF legacy_mem by "X" + + If the EFI memory map reports this entire range as WB, there + is no VGA MMIO hole, and the mmap should fail or be done with + a WB mapping. + + There's no easy way for X to determine whether the 0xA0000-0xBFFFF + region is a frame buffer or just memory, so I think it's best to + just fail this mmap request rather than using a WB mapping. As + far as I know, there's no need to map legacy_mem with WB + mappings. + + Otherwise, a UC mapping of the entire region is probably safe. + The VGA hole means the region will not be in kern_memmap. The + HP sx1000 chipset doesn't support UC access to the memory surrounding + the VGA hole, but X doesn't need that area anyway and should not + reference it. + + mmap of 0xA0000-0xBFFFF legacy_mem by "X" on HP sx1000 with VGA disabled + + The EFI memory map reports the following attributes: + 0x00000-0xFFFFF WB only (no VGA MMIO hole) + + This is a special case of the previous case, and the mmap should + fail for the same reason as above. + +NOTES + + [1] SDM rev 2.2, vol 2, sec 4.4.1. + [2] SDM rev 2.2, vol 2, sec 4.4.6. diff --git a/trunk/Documentation/ioctl-number.txt b/trunk/Documentation/ioctl-number.txt index 171a44ebd939..1543802ef53e 100644 --- a/trunk/Documentation/ioctl-number.txt +++ b/trunk/Documentation/ioctl-number.txt @@ -85,7 +85,9 @@ Code Seq# Include File Comments 'C' all linux/soundcard.h 'D' all asm-s390/dasd.h +'E' all linux/input.h 'F' all linux/fb.h +'H' all linux/hiddev.h 'I' all linux/isdn.h 'J' 00-1F drivers/scsi/gdth_ioctl.h 'K' all linux/kd.h diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt index a9d3a1794b23..bca6f389da66 100644 --- a/trunk/Documentation/kernel-parameters.txt +++ b/trunk/Documentation/kernel-parameters.txt @@ -147,6 +147,9 @@ running once the system is up. acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA Format: ,... + acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS + Format: To spoof as Windows 98: ="Microsoft Windows" + acpi_osi= [HW,ACPI] empty param disables _OSI acpi_serialize [HW,ACPI] force serialization of AML methods diff --git a/trunk/Documentation/networking/tuntap.txt b/trunk/Documentation/networking/tuntap.txt index 76750fb9151a..839cbb71388b 100644 --- a/trunk/Documentation/networking/tuntap.txt +++ b/trunk/Documentation/networking/tuntap.txt @@ -39,10 +39,13 @@ Copyright (C) 1999-2000 Maxim Krasnyansky mknod /dev/net/tun c 10 200 Set permissions: - e.g. chmod 0700 /dev/net/tun - if you want the device only accessible by root. Giving regular users the - right to assign network devices is NOT a good idea. Users could assign - bogus network interfaces to trick firewalls or administrators. + e.g. chmod 0666 /dev/net/tun + There's no harm in allowing the device to be accessible by non-root users, + since CAP_NET_ADMIN is required for creating network devices or for + connecting to network devices which aren't owned by the user in question. + If you want to create persistent devices and give ownership of them to + unprivileged users, then you need the /dev/net/tun device to be usable by + those users. Driver module autoloading diff --git a/trunk/Documentation/power/swsusp.txt b/trunk/Documentation/power/swsusp.txt index 516c5019013b..823b2cf6e3dc 100644 --- a/trunk/Documentation/power/swsusp.txt +++ b/trunk/Documentation/power/swsusp.txt @@ -350,9 +350,34 @@ Q: How do I make suspend more verbose? A: If you want to see any non-error kernel messages on the virtual terminal the kernel switches to during suspend, you have to set the -kernel console loglevel to at least 5, for example by doing - - echo 5 > /proc/sys/kernel/printk +kernel console loglevel to at least 4 (KERN_WARNING), for example by +doing + + # save the old loglevel + read LOGLEVEL DUMMY < /proc/sys/kernel/printk + # set the loglevel so we see the progress bar. + # if the level is higher than needed, we leave it alone. + if [ $LOGLEVEL -lt 5 ]; then + echo 5 > /proc/sys/kernel/printk + fi + + IMG_SZ=0 + read IMG_SZ < /sys/power/image_size + echo -n disk > /sys/power/state + RET=$? + # + # the logic here is: + # if image_size > 0 (without kernel support, IMG_SZ will be zero), + # then try again with image_size set to zero. + if [ $RET -ne 0 -a $IMG_SZ -ne 0 ]; then # try again with minimal image size + echo 0 > /sys/power/image_size + echo -n disk > /sys/power/state + RET=$? + fi + + # restore previous loglevel + echo $LOGLEVEL > /proc/sys/kernel/printk + exit $RET Q: Is this true that if I have a mounted filesystem on a USB device and I suspend to disk, I can lose data unless the filesystem has been mounted @@ -380,3 +405,17 @@ safest thing is to unmount all filesystems on removable media (such USB, Firewire, CompactFlash, MMC, external SATA, or even IDE hotplug bays) before suspending; then remount them after resuming. +Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were +compiled with the similar configuration files. Anyway I found that +suspend to disk (and resume) is much slower on 2.6.16 compared to +2.6.15. Any idea for why that might happen or how can I speed it up? + +A: This is because the size of the suspend image is now greater than +for 2.6.15 (by saving more data we can get more responsive system +after resume). + +There's the /sys/power/image_size knob that controls the size of the +image. If you set it to 0 (eg. by echo 0 > /sys/power/image_size as +root), the 2.6.15 behavior should be restored. If it is still too +slow, take a look at suspend.sf.net -- userland suspend is faster and +supports LZF compression to speed it up further. diff --git a/trunk/Documentation/power/video.txt b/trunk/Documentation/power/video.txt index 43a889f8f08d..d859faa3a463 100644 --- a/trunk/Documentation/power/video.txt +++ b/trunk/Documentation/power/video.txt @@ -90,6 +90,7 @@ Table of known working notebooks: Model hack (or "how to do it") ------------------------------------------------------------------------------ Acer Aspire 1406LC ole's late BIOS init (7), turn off DRI +Acer TM 230 s3_bios (2) Acer TM 242FX vbetool (6) Acer TM C110 video_post (8) Acer TM C300 vga=normal (only suspend on console, not in X), vbetool (6) or video_post (8) @@ -115,6 +116,7 @@ Dell D610 vga=normal and X (possibly vbestate (6) too, but not tested) Dell Inspiron 4000 ??? (*) Dell Inspiron 500m ??? (*) Dell Inspiron 510m ??? +Dell Inspiron 5150 vbetool needed (6) Dell Inspiron 600m ??? (*) Dell Inspiron 8200 ??? (*) Dell Inspiron 8500 ??? (*) @@ -125,6 +127,7 @@ HP NX7000 ??? (*) HP Pavilion ZD7000 vbetool post needed, need open-source nv driver for X HP Omnibook XE3 athlon version none (1) HP Omnibook XE3GC none (1), video is S3 Savage/IX-MV +HP Omnibook XE3L-GF vbetool (6) HP Omnibook 5150 none (1), (S1 also works OK) IBM TP T20, model 2647-44G none (1), video is S3 Inc. 86C270-294 Savage/IX-MV, vesafb gets "interesting" but X work. IBM TP A31 / Type 2652-M5G s3_mode (3) [works ok with BIOS 1.04 2002-08-23, but not at all with BIOS 1.11 2004-11-05 :-(] @@ -157,6 +160,7 @@ Sony Vaio vgn-s260 X or boot-radeon can init it (5) Sony Vaio vgn-S580BH vga=normal, but suspend from X. Console will be blank unless you return to X. Sony Vaio vgn-FS115B s3_bios (2),s3_mode (4) Toshiba Libretto L5 none (1) +Toshiba Libretto 100CT/110CT vbetool (6) Toshiba Portege 3020CT s3_mode (3) Toshiba Satellite 4030CDT s3_mode (3) (S1 also works OK) Toshiba Satellite 4080XCDT s3_mode (3) (S1 also works OK) diff --git a/trunk/Documentation/sparse.txt b/trunk/Documentation/sparse.txt index 3f1c5464b1c9..5a311c38dd1a 100644 --- a/trunk/Documentation/sparse.txt +++ b/trunk/Documentation/sparse.txt @@ -1,5 +1,6 @@ Copyright 2004 Linus Torvalds Copyright 2004 Pavel Machek +Copyright 2006 Bob Copeland Using sparse for typechecking ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -41,15 +42,8 @@ sure that bitwise types don't get mixed up (little-endian vs big-endian vs cpu-endian vs whatever), and there the constant "0" really _is_ special. -Use - - make C=[12] CF=-Wbitwise - -or you don't get any checking at all. - - -Where to get sparse -~~~~~~~~~~~~~~~~~~~ +Getting sparse +~~~~~~~~~~~~~~ With git, you can just get it from @@ -57,7 +51,7 @@ With git, you can just get it from and DaveJ has tar-balls at - http://www.codemonkey.org.uk/projects/git-snapshots/sparse/ + http://www.codemonkey.org.uk/projects/git-snapshots/sparse/ Once you have it, just do @@ -65,8 +59,20 @@ Once you have it, just do make make install -as your regular user, and it will install sparse in your ~/bin directory. -After that, doing a kernel make with "make C=1" will run sparse on all the -C files that get recompiled, or with "make C=2" will run sparse on the -files whether they need to be recompiled or not (ie the latter is fast way -to check the whole tree if you have already built it). +as a regular user, and it will install sparse in your ~/bin directory. + +Using sparse +~~~~~~~~~~~~ + +Do a kernel make with "make C=1" to run sparse on all the C files that get +recompiled, or use "make C=2" to run sparse on the files whether they need to +be recompiled or not. The latter is a fast way to check the whole tree if you +have already built it. + +The optional make variable CF can be used to pass arguments to sparse. The +build system passes -Wbitwise to sparse automatically. To perform endianness +checks, you may define __CHECK_ENDIAN__: + + make C=2 CF="-D__CHECK_ENDIAN__" + +These checks are disabled by default as they generate a host of warnings. diff --git a/trunk/Documentation/sysctl/vm.txt b/trunk/Documentation/sysctl/vm.txt index a46c10fcddfc..2dc246af4885 100644 --- a/trunk/Documentation/sysctl/vm.txt +++ b/trunk/Documentation/sysctl/vm.txt @@ -29,6 +29,7 @@ Currently, these files are in /proc/sys/vm: - drop-caches - zone_reclaim_mode - zone_reclaim_interval +- panic_on_oom ============================================================== @@ -178,3 +179,15 @@ Time is set in seconds and set by default to 30 seconds. Reduce the interval if undesired off node allocations occur. However, too frequent scans will have a negative impact onoff node allocation performance. +============================================================= + +panic_on_oom + +This enables or disables panic on out-of-memory feature. If this is set to 1, +the kernel panics when out-of-memory happens. If this is set to 0, the kernel +will kill some rogue process, called oom_killer. Usually, oom_killer can kill +rogue processes and system will survive. If you want to panic the system +rather than killing rogue processes, set this to 1. + +The default value is 0. + diff --git a/trunk/Documentation/vm/page_migration b/trunk/Documentation/vm/page_migration index 0dd4ef30c361..99f89aa10169 100644 --- a/trunk/Documentation/vm/page_migration +++ b/trunk/Documentation/vm/page_migration @@ -26,8 +26,13 @@ a process are located. See also the numa_maps manpage in the numactl package. Manual migration is useful if for example the scheduler has relocated a process to a processor on a distant node. A batch scheduler or an administrator may detect the situation and move the pages of the process -nearer to the new processor. At some point in the future we may have -some mechanism in the scheduler that will automatically move the pages. +nearer to the new processor. The kernel itself does only provide +manual page migration support. Automatic page migration may be implemented +through user space processes that move pages. A special function call +"move_pages" allows the moving of individual pages within a process. +A NUMA profiler may f.e. obtain a log showing frequent off node +accesses and may use the result to move pages to more advantageous +locations. Larger installations usually partition the system using cpusets into sections of nodes. Paul Jackson has equipped cpusets with the ability to @@ -62,22 +67,14 @@ A. In kernel use of migrate_pages() It also prevents the swapper or other scans to encounter the page. -2. Generate a list of newly allocates page. These pages will contain the - contents of the pages from the first list after page migration is - complete. +2. We need to have a function of type new_page_t that can be + passed to migrate_pages(). This function should figure out + how to allocate the correct new page given the old page. 3. The migrate_pages() function is called which attempts - to do the migration. It returns the moved pages in the - list specified as the third parameter and the failed - migrations in the fourth parameter. The first parameter - will contain the pages that could still be retried. - -4. The leftover pages of various types are returned - to the LRU using putback_to_lru_pages() or otherwise - disposed of. The pages will still have the refcount as - increased by isolate_lru_pages() if putback_to_lru_pages() is not - used! The kernel may want to handle the various cases of failures in - different ways. + to do the migration. It will call the function to allocate + the new page for each page that is considered for + moving. B. How migrate_pages() works ---------------------------- @@ -93,83 +90,58 @@ Steps: 2. Insure that writeback is complete. -3. Make sure that the page has assigned swap cache entry if - it is an anonyous page. The swap cache reference is necessary - to preserve the information contain in the page table maps while - page migration occurs. - -4. Prep the new page that we want to move to. It is locked +3. Prep the new page that we want to move to. It is locked and set to not being uptodate so that all accesses to the new page immediately lock while the move is in progress. -5. All the page table references to the page are either dropped (file - backed pages) or converted to swap references (anonymous pages). - This should decrease the reference count. +4. The new page is prepped with some settings from the old page so that + accesses to the new page will discover a page with the correct settings. + +5. All the page table references to the page are converted + to migration entries or dropped (nonlinear vmas). + This decrease the mapcount of a page. If the resulting + mapcount is not zero then we do not migrate the page. + All user space processes that attempt to access the page + will now wait on the page lock. 6. The radix tree lock is taken. This will cause all processes trying - to reestablish a pte to block on the radix tree spinlock. + to access the page via the mapping to block on the radix tree spinlock. 7. The refcount of the page is examined and we back out if references remain otherwise we know that we are the only one referencing this page. 8. The radix tree is checked and if it does not contain the pointer to this - page then we back out because someone else modified the mapping first. - -9. The mapping is checked. If the mapping is gone then a truncate action may - be in progress and we back out. - -10. The new page is prepped with some settings from the old page so that - accesses to the new page will be discovered to have the correct settings. + page then we back out because someone else modified the radix tree. -11. The radix tree is changed to point to the new page. +9. The radix tree is changed to point to the new page. -12. The reference count of the old page is dropped because the radix tree - reference is gone. +10. The reference count of the old page is dropped because the radix tree + reference is gone. A reference to the new page is established because + the new page is referenced to by the radix tree. -13. The radix tree lock is dropped. With that lookups become possible again - and other processes will move from spinning on the tree lock to sleeping on - the locked new page. +11. The radix tree lock is dropped. With that lookups in the mapping + become possible again. Processes will move from spinning on the tree_lock + to sleeping on the locked new page. -14. The page contents are copied to the new page. +12. The page contents are copied to the new page. -15. The remaining page flags are copied to the new page. +13. The remaining page flags are copied to the new page. -16. The old page flags are cleared to indicate that the page does - not use any information anymore. +14. The old page flags are cleared to indicate that the page does + not provide any information anymore. -17. Queued up writeback on the new page is triggered. +15. Queued up writeback on the new page is triggered. -18. If swap pte's were generated for the page then replace them with real - ptes. This will reenable access for processes not blocked by the page lock. +16. If migration entries were page then replace them with real ptes. Doing + so will enable access for user space processes not already waiting for + the page lock. 19. The page locks are dropped from the old and new page. - Processes waiting on the page lock can continue. + Processes waiting on the page lock will redo their page faults + and will reach the new page. 20. The new page is moved to the LRU and can be scanned by the swapper etc again. -TODO list ---------- - -- Page migration requires the use of swap handles to preserve the - information of the anonymous page table entries. This means that swap - space is reserved but never used. The maximum number of swap handles used - is determined by CHUNK_SIZE (see mm/mempolicy.c) per ongoing migration. - Reservation of pages could be avoided by having a special type of swap - handle that does not require swap space and that would only track the page - references. Something like that was proposed by Marcelo Tosatti in the - past (search for migration cache on lkml or linux-mm@kvack.org). - -- Page migration unmaps ptes for file backed pages and requires page - faults to reestablish these ptes. This could be optimized by somehow - recording the references before migration and then reestablish them later. - However, there are several locking challenges that have to be overcome - before this is possible. - -- Page migration generates read ptes for anonymous pages. Dirty page - faults are required to make the pages writable again. It may be possible - to generate a pte marked dirty if it is known that the page is dirty and - that this process has the only reference to that page. - -Christoph Lameter, March 8, 2006. +Christoph Lameter, May 8, 2006. diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index f4cf0148c901..4dcd2f1f14d6 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -574,6 +574,12 @@ L: linuxppc-dev@ozlabs.org W: http://www.penguinppc.org/ppc64/ S: Supported +BROADCOM B44 10/100 ETHERNET DRIVER +P: Gary Zambrano +M: zambrano@broadcom.com +L: netdev@vger.kernel.org +S: Supported + BROADCOM BNX2 GIGABIT ETHERNET DRIVER P: Michael Chan M: mchan@broadcom.com diff --git a/trunk/arch/alpha/kernel/alpha_ksyms.c b/trunk/arch/alpha/kernel/alpha_ksyms.c index 2b245ad731ee..d3848c5b0d2b 100644 --- a/trunk/arch/alpha/kernel/alpha_ksyms.c +++ b/trunk/arch/alpha/kernel/alpha_ksyms.c @@ -53,10 +53,6 @@ extern void __divqu (void); extern void __remqu (void); EXPORT_SYMBOL(alpha_mv); -EXPORT_SYMBOL(enable_irq); -EXPORT_SYMBOL(disable_irq); -EXPORT_SYMBOL(disable_irq_nosync); -EXPORT_SYMBOL(probe_irq_mask); EXPORT_SYMBOL(screen_info); EXPORT_SYMBOL(perf_irq); EXPORT_SYMBOL(callback_getenv); @@ -68,19 +64,13 @@ EXPORT_SYMBOL(alpha_using_srm); /* platform dependent support */ EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strcmp); EXPORT_SYMBOL(strcpy); EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strncmp); EXPORT_SYMBOL(strncpy); -EXPORT_SYMBOL(strnlen); EXPORT_SYMBOL(strncat); -EXPORT_SYMBOL(strstr); EXPORT_SYMBOL(strchr); EXPORT_SYMBOL(strrchr); -EXPORT_SYMBOL(memcmp); EXPORT_SYMBOL(memmove); -EXPORT_SYMBOL(memscan); EXPORT_SYMBOL(__memcpy); EXPORT_SYMBOL(__memset); EXPORT_SYMBOL(__memsetw); @@ -122,11 +112,9 @@ EXPORT_SYMBOL(alpha_write_fp_reg_s); /* In-kernel system calls. */ EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(sys_open); EXPORT_SYMBOL(sys_dup); EXPORT_SYMBOL(sys_exit); EXPORT_SYMBOL(sys_write); -EXPORT_SYMBOL(sys_read); EXPORT_SYMBOL(sys_lseek); EXPORT_SYMBOL(execve); EXPORT_SYMBOL(sys_setsid); diff --git a/trunk/arch/alpha/kernel/osf_sys.c b/trunk/arch/alpha/kernel/osf_sys.c index 31afe3d91ac6..e15dcf4f3dcd 100644 --- a/trunk/arch/alpha/kernel/osf_sys.c +++ b/trunk/arch/alpha/kernel/osf_sys.c @@ -244,7 +244,7 @@ do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer, unsigned long bufsiz) { struct kstatfs linux_stat; - int error = vfs_statfs(dentry->d_inode->i_sb, &linux_stat); + int error = vfs_statfs(dentry, &linux_stat); if (!error) error = linux_to_osf_statfs(&linux_stat, buffer, bufsiz); return error; diff --git a/trunk/arch/alpha/kernel/signal.c b/trunk/arch/alpha/kernel/signal.c index 2e45e8604e32..741da0945dc4 100644 --- a/trunk/arch/alpha/kernel/signal.c +++ b/trunk/arch/alpha/kernel/signal.c @@ -375,7 +375,7 @@ do_rt_sigreturn(struct rt_sigframe __user *frame, struct pt_regs *regs, static inline void __user * get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) { - if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! on_sig_stack(sp)) + if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp)) sp = current->sas_ss_sp + current->sas_ss_size; return (void __user *)((sp - frame_size) & -32ul); diff --git a/trunk/arch/arm/common/Makefile b/trunk/arch/arm/common/Makefile index 847e3e6356c6..e1289a256ce5 100644 --- a/trunk/arch/arm/common/Makefile +++ b/trunk/arch/arm/common/Makefile @@ -16,3 +16,4 @@ obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_ARCH_IXP2000) += uengine.o +obj-$(CONFIG_ARCH_IXP23XX) += uengine.o diff --git a/trunk/arch/arm/common/dmabounce.c b/trunk/arch/arm/common/dmabounce.c index 7971d0dc6892..5b7c26395b44 100644 --- a/trunk/arch/arm/common/dmabounce.c +++ b/trunk/arch/arm/common/dmabounce.c @@ -77,6 +77,8 @@ struct dmabounce_device_info { #endif struct dmabounce_pool small; struct dmabounce_pool large; + + rwlock_t lock; }; static LIST_HEAD(dmabounce_devs); @@ -116,6 +118,7 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr, struct safe_buffer *buf; struct dmabounce_pool *pool; struct device *dev = device_info->dev; + unsigned long flags; dev_dbg(dev, "%s(ptr=%p, size=%d, dir=%d)\n", __func__, ptr, size, dir); @@ -163,8 +166,12 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr, print_alloc_stats(device_info); #endif + write_lock_irqsave(&device_info->lock, flags); + list_add(&buf->node, &device_info->safe_buffers); + write_unlock_irqrestore(&device_info->lock, flags); + return buf; } @@ -172,22 +179,32 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr, static inline struct safe_buffer * find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr) { - struct safe_buffer *b; + struct safe_buffer *b = NULL; + unsigned long flags; + + read_lock_irqsave(&device_info->lock, flags); list_for_each_entry(b, &device_info->safe_buffers, node) if (b->safe_dma_addr == safe_dma_addr) - return b; + break; - return NULL; + read_unlock_irqrestore(&device_info->lock, flags); + return b; } static inline void free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *buf) { + unsigned long flags; + dev_dbg(device_info->dev, "%s(buf=%p)\n", __func__, buf); + write_lock_irqsave(&device_info->lock, flags); + list_del(&buf->node); + write_unlock_irqrestore(&device_info->lock, flags); + if (buf->pool) dma_pool_free(buf->pool->pool, buf->safe, buf->safe_dma_addr); else @@ -396,7 +413,6 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, enum dma_data_direction dir) { - unsigned long flags; dma_addr_t dma_addr; dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", @@ -404,12 +420,8 @@ dma_map_single(struct device *dev, void *ptr, size_t size, BUG_ON(dir == DMA_NONE); - local_irq_save(flags); - dma_addr = map_single(dev, ptr, size, dir); - local_irq_restore(flags); - return dma_addr; } @@ -424,25 +436,18 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction dir) { - unsigned long flags; - dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", __func__, (void *) dma_addr, size, dir); BUG_ON(dir == DMA_NONE); - local_irq_save(flags); - unmap_single(dev, dma_addr, size, dir); - - local_irq_restore(flags); } int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction dir) { - unsigned long flags; int i; dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n", @@ -450,8 +455,6 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, BUG_ON(dir == DMA_NONE); - local_irq_save(flags); - for (i = 0; i < nents; i++, sg++) { struct page *page = sg->page; unsigned int offset = sg->offset; @@ -462,8 +465,6 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, map_single(dev, ptr, length, dir); } - local_irq_restore(flags); - return nents; } @@ -471,7 +472,6 @@ void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction dir) { - unsigned long flags; int i; dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n", @@ -479,55 +479,38 @@ dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, BUG_ON(dir == DMA_NONE); - local_irq_save(flags); - for (i = 0; i < nents; i++, sg++) { dma_addr_t dma_addr = sg->dma_address; unsigned int length = sg->length; unmap_single(dev, dma_addr, length, dir); } - - local_irq_restore(flags); } void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction dir) { - unsigned long flags; - dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", __func__, (void *) dma_addr, size, dir); - local_irq_save(flags); - sync_single(dev, dma_addr, size, dir); - - local_irq_restore(flags); } void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction dir) { - unsigned long flags; - dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", __func__, (void *) dma_addr, size, dir); - local_irq_save(flags); - sync_single(dev, dma_addr, size, dir); - - local_irq_restore(flags); } void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction dir) { - unsigned long flags; int i; dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n", @@ -535,23 +518,18 @@ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, BUG_ON(dir == DMA_NONE); - local_irq_save(flags); - for (i = 0; i < nents; i++, sg++) { dma_addr_t dma_addr = sg->dma_address; unsigned int length = sg->length; sync_single(dev, dma_addr, length, dir); } - - local_irq_restore(flags); } void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction dir) { - unsigned long flags; int i; dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n", @@ -559,16 +537,12 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents, BUG_ON(dir == DMA_NONE); - local_irq_save(flags); - for (i = 0; i < nents; i++, sg++) { dma_addr_t dma_addr = sg->dma_address; unsigned int length = sg->length; sync_single(dev, dma_addr, length, dir); } - - local_irq_restore(flags); } static int @@ -622,6 +596,7 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size, device_info->dev = dev; INIT_LIST_HEAD(&device_info->safe_buffers); + rwlock_init(&device_info->lock); #ifdef STATS device_info->total_allocs = 0; diff --git a/trunk/arch/arm/common/uengine.c b/trunk/arch/arm/common/uengine.c index a1310b71004e..dfca596a9a27 100644 --- a/trunk/arch/arm/common/uengine.c +++ b/trunk/arch/arm/common/uengine.c @@ -18,10 +18,26 @@ #include #include #include -#include +#include #include #include +#if defined(CONFIG_ARCH_IXP2000) +#define IXP_UENGINE_CSR_VIRT_BASE IXP2000_UENGINE_CSR_VIRT_BASE +#define IXP_PRODUCT_ID IXP2000_PRODUCT_ID +#define IXP_MISC_CONTROL IXP2000_MISC_CONTROL +#define IXP_RESET1 IXP2000_RESET1 +#else +#if defined(CONFIG_ARCH_IXP23XX) +#define IXP_UENGINE_CSR_VIRT_BASE IXP23XX_UENGINE_CSR_VIRT_BASE +#define IXP_PRODUCT_ID IXP23XX_PRODUCT_ID +#define IXP_MISC_CONTROL IXP23XX_MISC_CONTROL +#define IXP_RESET1 IXP23XX_RESET1 +#else +#error unknown platform +#endif +#endif + #define USTORE_ADDRESS 0x000 #define USTORE_DATA_LOWER 0x004 #define USTORE_DATA_UPPER 0x008 @@ -43,7 +59,7 @@ u32 ixp2000_uengine_mask; static void *ixp2000_uengine_csr_area(int uengine) { - return ((void *)IXP2000_UENGINE_CSR_VIRT_BASE) + (uengine << 10); + return ((void *)IXP_UENGINE_CSR_VIRT_BASE) + (uengine << 10); } /* @@ -91,8 +107,13 @@ EXPORT_SYMBOL(ixp2000_uengine_csr_write); void ixp2000_uengine_reset(u32 uengine_mask) { - ixp2000_reg_wrb(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask); - ixp2000_reg_wrb(IXP2000_RESET1, 0); + u32 value; + + value = ixp2000_reg_read(IXP_RESET1) & ~ixp2000_uengine_mask; + + uengine_mask &= ixp2000_uengine_mask; + ixp2000_reg_wrb(IXP_RESET1, value | uengine_mask); + ixp2000_reg_wrb(IXP_RESET1, value); } EXPORT_SYMBOL(ixp2000_uengine_reset); @@ -235,11 +256,12 @@ static int check_ixp_type(struct ixp2000_uengine_code *c) u32 product_id; u32 rev; - product_id = ixp2000_reg_read(IXP2000_PRODUCT_ID); + product_id = ixp2000_reg_read(IXP_PRODUCT_ID); if (((product_id >> 16) & 0x1f) != 0) return 0; switch ((product_id >> 8) & 0xff) { +#ifdef CONFIG_ARCH_IXP2000 case 0: /* IXP2800 */ if (!(c->cpu_model_bitmask & 4)) return 0; @@ -254,6 +276,14 @@ static int check_ixp_type(struct ixp2000_uengine_code *c) if (!(c->cpu_model_bitmask & 2)) return 0; break; +#endif + +#ifdef CONFIG_ARCH_IXP23XX + case 4: /* IXP23xx */ + if (!(c->cpu_model_bitmask & 0x3f0)) + return 0; + break; +#endif default: return 0; @@ -432,7 +462,8 @@ static int __init ixp2000_uengine_init(void) /* * Determine number of microengines present. */ - switch ((ixp2000_reg_read(IXP2000_PRODUCT_ID) >> 8) & 0x1fff) { + switch ((ixp2000_reg_read(IXP_PRODUCT_ID) >> 8) & 0x1fff) { +#ifdef CONFIG_ARCH_IXP2000 case 0: /* IXP2800 */ case 1: /* IXP2850 */ ixp2000_uengine_mask = 0x00ff00ff; @@ -441,10 +472,17 @@ static int __init ixp2000_uengine_init(void) case 2: /* IXP2400 */ ixp2000_uengine_mask = 0x000f000f; break; +#endif + +#ifdef CONFIG_ARCH_IXP23XX + case 4: /* IXP23xx */ + ixp2000_uengine_mask = (*IXP23XX_EXP_CFG_FUSE >> 8) & 0xf; + break; +#endif default: printk(KERN_INFO "Detected unknown IXP2000 model (%.8x)\n", - (unsigned int)ixp2000_reg_read(IXP2000_PRODUCT_ID)); + (unsigned int)ixp2000_reg_read(IXP_PRODUCT_ID)); ixp2000_uengine_mask = 0x00000000; break; } @@ -457,15 +495,15 @@ static int __init ixp2000_uengine_init(void) /* * Synchronise timestamp counters across all microengines. */ - value = ixp2000_reg_read(IXP2000_MISC_CONTROL); - ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value & ~0x80); + value = ixp2000_reg_read(IXP_MISC_CONTROL); + ixp2000_reg_wrb(IXP_MISC_CONTROL, value & ~0x80); for (uengine = 0; uengine < 32; uengine++) { if (ixp2000_uengine_mask & (1 << uengine)) { ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0); ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0); } } - ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value | 0x80); + ixp2000_reg_wrb(IXP_MISC_CONTROL, value | 0x80); return 0; } diff --git a/trunk/arch/arm/configs/lpd270_defconfig b/trunk/arch/arm/configs/lpd270_defconfig new file mode 100644 index 000000000000..d08bbe59483a --- /dev/null +++ b/trunk/arch/arm/configs/lpd270_defconfig @@ -0,0 +1,963 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17-git2 +# Wed Jun 21 22:20:18 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +CONFIG_MACH_LOGICPD_PXA270=y +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +CONFIG_PXA27x=y +CONFIG_IWMMXT=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +CONFIG_XSCALE_PMU=y + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +# CONFIG_PACKET is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +# CONFIG_MTD_CFI_I1 is not set +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=y +CONFIG_SND_PXA2XX_AC97=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +# CONFIG_VFAT_FS is not set +CONFIG_FAT_DEFAULT_CODEPAGE=437 +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/trunk/arch/arm/kernel/entry-armv.S b/trunk/arch/arm/kernel/entry-armv.S index ab8e600c18c8..86c92523a346 100644 --- a/trunk/arch/arm/kernel/entry-armv.S +++ b/trunk/arch/arm/kernel/entry-armv.S @@ -20,6 +20,7 @@ #include #include #include +#include #include "entry-header.S" @@ -560,10 +561,8 @@ ENTRY(__switch_to) add ip, r1, #TI_CPU_SAVE ldr r3, [r2, #TI_TP_VALUE] stmia ip!, {r4 - sl, fp, sp, lr} @ Store most regs on stack -#ifndef CONFIG_MMU - add r2, r2, #TI_CPU_DOMAIN -#else - ldr r6, [r2, #TI_CPU_DOMAIN]! +#ifdef CONFIG_MMU + ldr r6, [r2, #TI_CPU_DOMAIN] #endif #if __LINUX_ARM_ARCH__ >= 6 #ifdef CONFIG_CPU_32v6K @@ -585,21 +584,20 @@ ENTRY(__switch_to) #ifdef CONFIG_MMU mcr p15, 0, r6, c3, c0, 0 @ Set domain register #endif -#ifdef CONFIG_VFP - @ Always disable VFP so we can lazily save/restore the old - @ state. This occurs in the context of the previous thread. - VFPFMRX r4, FPEXC - bic r4, r4, #FPEXC_ENABLE - VFPFMXR FPEXC, r4 -#endif #if defined(CONFIG_IWMMXT) bl iwmmxt_task_switch #elif defined(CONFIG_CPU_XSCALE) - add r4, r2, #40 @ cpu_context_save->extra + add r4, r2, #TI_CPU_DOMAIN + 40 @ cpu_context_save->extra ldmib r4, {r4, r5} mar acc0, r4, r5 #endif - ldmib r2, {r4 - sl, fp, sp, pc} @ Load all regs saved previously + mov r5, r0 + add r4, r2, #TI_CPU_SAVE + ldr r0, =thread_notify_head + mov r1, #THREAD_NOTIFY_SWITCH + bl atomic_notifier_call_chain + mov r0, r5 + ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously __INIT diff --git a/trunk/arch/arm/kernel/irq.c b/trunk/arch/arm/kernel/irq.c index bcc19fbb32df..ec20f8935e8b 100644 --- a/trunk/arch/arm/kernel/irq.c +++ b/trunk/arch/arm/kernel/irq.c @@ -52,7 +52,7 @@ */ #define MAX_IRQ_CNT 100000 -static int noirqdebug; +static int noirqdebug __read_mostly; static volatile unsigned long irq_err_count; static DEFINE_SPINLOCK(irq_controller_lock); static LIST_HEAD(irq_pending); @@ -81,7 +81,7 @@ irqreturn_t no_action(int irq, void *dev_id, struct pt_regs *regs) void do_bad_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { - irq_err_count += 1; + irq_err_count++; printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq); } diff --git a/trunk/arch/arm/kernel/iwmmxt.S b/trunk/arch/arm/kernel/iwmmxt.S index 24c7b0477a09..af9e0ae952d5 100644 --- a/trunk/arch/arm/kernel/iwmmxt.S +++ b/trunk/arch/arm/kernel/iwmmxt.S @@ -285,7 +285,7 @@ ENTRY(iwmmxt_task_switch) bne 1f @ yes: block them for next task ldr r5, =concan_owner - add r6, r2, #(TI_IWMMXT_STATE - TI_CPU_DOMAIN) @ get next task Concan save area + add r6, r2, #TI_IWMMXT_STATE @ get next task Concan save area ldr r5, [r5] @ get current Concan owner teq r5, r6 @ next task owns it? movne pc, lr @ no: leave Concan disabled diff --git a/trunk/arch/arm/kernel/process.c b/trunk/arch/arm/kernel/process.c index 17c38dbf2f3c..e1c77ee885a7 100644 --- a/trunk/arch/arm/kernel/process.c +++ b/trunk/arch/arm/kernel/process.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -338,13 +339,9 @@ void exit_thread(void) { } -static void default_fp_init(union fp_state *fp) -{ - memset(fp, 0, sizeof(union fp_state)); -} +ATOMIC_NOTIFIER_HEAD(thread_notify_head); -void (*fp_init)(union fp_state *) = default_fp_init; -EXPORT_SYMBOL(fp_init); +EXPORT_SYMBOL_GPL(thread_notify_head); void flush_thread(void) { @@ -353,22 +350,21 @@ void flush_thread(void) memset(thread->used_cp, 0, sizeof(thread->used_cp)); memset(&tsk->thread.debug, 0, sizeof(struct debug_info)); + memset(&thread->fpstate, 0, sizeof(union fp_state)); + + thread_notify(THREAD_NOTIFY_FLUSH, thread); #if defined(CONFIG_IWMMXT) iwmmxt_task_release(thread); -#endif - fp_init(&thread->fpstate); -#if defined(CONFIG_VFP) - vfp_flush_thread(&thread->vfpstate); #endif } void release_thread(struct task_struct *dead_task) { -#if defined(CONFIG_VFP) - vfp_release_thread(&task_thread_info(dead_task)->vfpstate); -#endif + struct thread_info *thread = task_thread_info(dead_task); + + thread_notify(THREAD_NOTIFY_RELEASE, thread); #if defined(CONFIG_IWMMXT) - iwmmxt_task_release(task_thread_info(dead_task)); + iwmmxt_task_release(thread); #endif } diff --git a/trunk/arch/arm/kernel/signal.c b/trunk/arch/arm/kernel/signal.c index a0cd0a90a10d..f094277485c8 100644 --- a/trunk/arch/arm/kernel/signal.c +++ b/trunk/arch/arm/kernel/signal.c @@ -665,17 +665,33 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall) if (syscall) { if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) { if (thumb_mode(regs)) { - regs->ARM_r7 = __NR_restart_syscall; + regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE; regs->ARM_pc -= 2; } else { +#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT) + regs->ARM_r7 = __NR_restart_syscall; + regs->ARM_pc -= 4; +#else u32 __user *usp; + u32 swival = __NR_restart_syscall; regs->ARM_sp -= 12; usp = (u32 __user *)regs->ARM_sp; + /* + * Either we supports OABI only, or we have + * EABI with the OABI compat layer enabled. + * In the later case we don't know if user + * space is EABI or not, and if not we must + * not clobber r7. Always using the OABI + * syscall solves that issue and works for + * all those cases. + */ + swival = swival - __NR_SYSCALL_BASE + __NR_OABI_SYSCALL_BASE; + put_user(regs->ARM_pc, &usp[0]); /* swi __NR_restart_syscall */ - put_user(0xef000000 | __NR_restart_syscall, &usp[1]); + put_user(0xef000000 | swival, &usp[1]); /* ldr pc, [sp], #12 */ put_user(0xe49df00c, &usp[2]); @@ -683,6 +699,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall) (unsigned long)(usp + 3)); regs->ARM_pc = regs->ARM_sp + 4; +#endif } } if (regs->ARM_r0 == -ERESTARTNOHAND || diff --git a/trunk/arch/arm/mach-ep93xx/core.c b/trunk/arch/arm/mach-ep93xx/core.c index dcd417625389..bf6bd71bdd08 100644 --- a/trunk/arch/arm/mach-ep93xx/core.c +++ b/trunk/arch/arm/mach-ep93xx/core.c @@ -103,7 +103,8 @@ static int ep93xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) write_seqlock(&xtime_lock); __raw_writel(1, EP93XX_TIMER1_CLEAR); - while (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time + while ((signed long) + (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time) >= TIMER4_TICKS_PER_JIFFY) { last_jiffy_time += TIMER4_TICKS_PER_JIFFY; timer_tick(regs); @@ -124,7 +125,7 @@ static void __init ep93xx_timer_init(void) { /* Enable periodic HZ timer. */ __raw_writel(0x48, EP93XX_TIMER1_CONTROL); - __raw_writel((508000 / HZ) - 1, EP93XX_TIMER1_LOAD); + __raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD); __raw_writel(0xc8, EP93XX_TIMER1_CONTROL); /* Enable lost jiffy timer. */ diff --git a/trunk/arch/arm/mach-ep93xx/gesbc9312.c b/trunk/arch/arm/mach-ep93xx/gesbc9312.c index d18fcb1a2f1b..47cc6c8b7c79 100644 --- a/trunk/arch/arm/mach-ep93xx/gesbc9312.c +++ b/trunk/arch/arm/mach-ep93xx/gesbc9312.c @@ -16,16 +16,38 @@ #include #include #include +#include #include +#include #include #include #include #include +static struct physmap_flash_data gesbc9312_flash_data = { + .width = 4, +}; + +static struct resource gesbc9312_flash_resource = { + .start = 0x60000000, + .end = 0x60800000, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device gesbc9312_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &gesbc9312_flash_data, + }, + .num_resources = 1, + .resource = &gesbc9312_flash_resource, +}; + static void __init gesbc9312_init_machine(void) { ep93xx_init_devices(); - physmap_configure(0x60000000, 0x00800000, 4, NULL); + platform_device_register(&gesbc9312_flash); } MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx") diff --git a/trunk/arch/arm/mach-ep93xx/ts72xx.c b/trunk/arch/arm/mach-ep93xx/ts72xx.c index e24566b88a78..6e5a56cd5ae8 100644 --- a/trunk/arch/arm/mach-ep93xx/ts72xx.c +++ b/trunk/arch/arm/mach-ep93xx/ts72xx.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -111,6 +112,26 @@ static void __init ts72xx_map_io(void) } } +static struct physmap_flash_data ts72xx_flash_data = { + .width = 1, +}; + +static struct resource ts72xx_flash_resource = { + .start = TS72XX_NOR_PHYS_BASE, + .end = TS72XX_NOR_PHYS_BASE + 0x01000000, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ts72xx_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ts72xx_flash_data, + }, + .num_resources = 1, + .resource = &ts72xx_flash_resource, +}; + static unsigned char ts72xx_rtc_readbyte(unsigned long addr) { __raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE); @@ -141,7 +162,7 @@ static void __init ts72xx_init_machine(void) { ep93xx_init_devices(); if (board_is_ts7200()) - physmap_configure(TS72XX_NOR_PHYS_BASE, 0x01000000, 1, NULL); + platform_device_register(&ts72xx_flash); platform_device_register(&ts72xx_rtc_device); } diff --git a/trunk/arch/arm/mach-imx/dma.c b/trunk/arch/arm/mach-imx/dma.c index 4ca51dcf13ac..36578871ecc8 100644 --- a/trunk/arch/arm/mach-imx/dma.c +++ b/trunk/arch/arm/mach-imx/dma.c @@ -15,6 +15,9 @@ * Changed to support scatter gather DMA * by taking Russell's code from RiscPC * + * 2006-05-31 Pavel Pisa + * Corrected error handling code. + * */ #undef DEBUG @@ -277,7 +280,7 @@ imx_dma_setup_sg(imx_dmach_t dma_ch, int imx_dma_setup_handlers(imx_dmach_t dma_ch, void (*irq_handler) (int, void *, struct pt_regs *), - void (*err_handler) (int, void *, struct pt_regs *), + void (*err_handler) (int, void *, struct pt_regs *, int), void *data) { struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; @@ -463,43 +466,53 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id, struct pt_regs *regs) int i, disr = DISR; struct imx_dma_channel *channel; unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR; + int errcode; - DISR = disr; + DISR = disr & err_mask; for (i = 0; i < IMX_DMA_CHANNELS; i++) { - channel = &imx_dma_channels[i]; - - if ((err_mask & 1 << i) && channel->name - && channel->err_handler) { - channel->err_handler(i, channel->data, regs); + if(!(err_mask & (1 << i))) continue; - } - - imx_dma_channels[i].sg = NULL; + channel = &imx_dma_channels[i]; + errcode = 0; if (DBTOSR & (1 << i)) { - printk(KERN_WARNING - "Burst timeout on channel %d (%s)\n", - i, channel->name); - DBTOSR |= (1 << i); + DBTOSR = (1 << i); + errcode |= IMX_DMA_ERR_BURST; } if (DRTOSR & (1 << i)) { - printk(KERN_WARNING - "Request timeout on channel %d (%s)\n", - i, channel->name); - DRTOSR |= (1 << i); + DRTOSR = (1 << i); + errcode |= IMX_DMA_ERR_REQUEST; } if (DSESR & (1 << i)) { - printk(KERN_WARNING - "Transfer timeout on channel %d (%s)\n", - i, channel->name); - DSESR |= (1 << i); + DSESR = (1 << i); + errcode |= IMX_DMA_ERR_TRANSFER; } if (DBOSR & (1 << i)) { - printk(KERN_WARNING - "Buffer overflow timeout on channel %d (%s)\n", - i, channel->name); - DBOSR |= (1 << i); + DBOSR = (1 << i); + errcode |= IMX_DMA_ERR_BUFFER; } + + /* + * The cleaning of @sg field would be questionable + * there, because its value can help to compute + * remaining/transfered bytes count in the handler + */ + /*imx_dma_channels[i].sg = NULL;*/ + + if (channel->name && channel->err_handler) { + channel->err_handler(i, channel->data, regs, errcode); + continue; + } + + imx_dma_channels[i].sg = NULL; + + printk(KERN_WARNING + "DMA timeout on channel %d (%s) -%s%s%s%s\n", + i, channel->name, + errcode&IMX_DMA_ERR_BURST? " burst":"", + errcode&IMX_DMA_ERR_REQUEST? " request":"", + errcode&IMX_DMA_ERR_TRANSFER? " transfer":"", + errcode&IMX_DMA_ERR_BUFFER? " buffer":""); } return IRQ_HANDLED; } diff --git a/trunk/arch/arm/mach-ixp2000/core.c b/trunk/arch/arm/mach-ixp2000/core.c index 6e8d504aca55..186f632035b8 100644 --- a/trunk/arch/arm/mach-ixp2000/core.c +++ b/trunk/arch/arm/mach-ixp2000/core.c @@ -211,7 +211,8 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* clear timer 1 */ ixp2000_reg_wrb(IXP2000_T1_CLR, 1); - while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) { + while ((signed long)(next_jiffy_time - *missing_jiffy_timer_csr) + >= ticks_per_jiffy) { timer_tick(regs); next_jiffy_time -= ticks_per_jiffy; } diff --git a/trunk/arch/arm/mach-ixp23xx/core.c b/trunk/arch/arm/mach-ixp23xx/core.c index affd1d5d7440..051e3d70026e 100644 --- a/trunk/arch/arm/mach-ixp23xx/core.c +++ b/trunk/arch/arm/mach-ixp23xx/core.c @@ -334,7 +334,7 @@ void __init ixp23xx_init_irq(void) /************************************************************************* * Timer-tick functions for IXP23xx *************************************************************************/ -#define CLOCK_TICKS_PER_USEC CLOCK_TICK_RATE / (USEC_PER_SEC) +#define CLOCK_TICKS_PER_USEC (CLOCK_TICK_RATE / USEC_PER_SEC) static unsigned long next_jiffy_time; @@ -353,7 +353,7 @@ ixp23xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { /* Clear Pending Interrupt by writing '1' to it */ *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND; - while ((*IXP23XX_TIMER_CONT - next_jiffy_time) > LATCH) { + while ((signed long)(*IXP23XX_TIMER_CONT - next_jiffy_time) >= LATCH) { timer_tick(regs); next_jiffy_time += LATCH; } @@ -439,5 +439,6 @@ static struct platform_device *ixp23xx_devices[] __initdata = { void __init ixp23xx_sys_init(void) { + *IXP23XX_EXP_UNIT_FUSE |= 0xf; platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices)); } diff --git a/trunk/arch/arm/mach-ixp23xx/espresso.c b/trunk/arch/arm/mach-ixp23xx/espresso.c index bf688c128630..dc5e489c70bc 100644 --- a/trunk/arch/arm/mach-ixp23xx/espresso.c +++ b/trunk/arch/arm/mach-ixp23xx/espresso.c @@ -53,9 +53,29 @@ static int __init espresso_pci_init(void) }; subsys_initcall(espresso_pci_init); +static struct physmap_flash_data espresso_flash_data = { + .width = 2, +}; + +static struct resource espresso_flash_resource = { + .start = 0x90000000, + .end = 0x92000000, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device espresso_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &espresso_flash_data, + }, + .num_resources = 1, + .resource = &espresso_flash_resource, +}; + static void __init espresso_init(void) { - physmap_configure(0x90000000, 0x02000000, 2, NULL); + platform_device_register(&espresso_flash); /* * Mark flash as writeable. diff --git a/trunk/arch/arm/mach-ixp23xx/ixdp2351.c b/trunk/arch/arm/mach-ixp23xx/ixdp2351.c index 00146c35daac..535b334ee045 100644 --- a/trunk/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/trunk/arch/arm/mach-ixp23xx/ixdp2351.c @@ -298,9 +298,29 @@ static void __init ixdp2351_map_io(void) iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc)); } +static struct physmap_flash_data ixdp2351_flash_data = { + .width = 1, +}; + +static struct resource ixdp2351_flash_resource = { + .start = 0x90000000, + .end = 0x94000000, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ixdp2351_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ixdp2351_flash_data, + }, + .num_resources = 1, + .resource = &ixdp2351_flash_resource, +}; + static void __init ixdp2351_init(void) { - physmap_configure(0x90000000, 0x04000000, 1, NULL); + platform_device_register(&ixdp2351_flash); /* * Mark flash as writeable diff --git a/trunk/arch/arm/mach-ixp23xx/roadrunner.c b/trunk/arch/arm/mach-ixp23xx/roadrunner.c index 43c14e740794..b9f5d13fcfe1 100644 --- a/trunk/arch/arm/mach-ixp23xx/roadrunner.c +++ b/trunk/arch/arm/mach-ixp23xx/roadrunner.c @@ -137,9 +137,29 @@ static int __init roadrunner_pci_init(void) subsys_initcall(roadrunner_pci_init); +static struct physmap_flash_data roadrunner_flash_data = { + .width = 2, +}; + +static struct resource roadrunner_flash_resource = { + .start = 0x90000000, + .end = 0x94000000, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device roadrunner_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &roadrunner_flash_data, + }, + .num_resources = 1, + .resource = &roadrunner_flash_resource, +}; + static void __init roadrunner_init(void) { - physmap_configure(0x90000000, 0x04000000, 2, NULL); + platform_device_register(&roadrunner_flash); /* * Mark flash as writeable diff --git a/trunk/arch/arm/mach-ixp4xx/common.c b/trunk/arch/arm/mach-ixp4xx/common.c index 00b761ff0f9c..bf25a76e9bdf 100644 --- a/trunk/arch/arm/mach-ixp4xx/common.c +++ b/trunk/arch/arm/mach-ixp4xx/common.c @@ -276,7 +276,7 @@ static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs /* * Catch up with the real idea of time */ - while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) { + while ((signed long)(*IXP4XX_OSTS - last_jiffy_time) >= LATCH) { timer_tick(regs); last_jiffy_time += LATCH; } diff --git a/trunk/arch/arm/mach-ixp4xx/nas100d-setup.c b/trunk/arch/arm/mach-ixp4xx/nas100d-setup.c index a3b4c6ac5708..9a31444d9214 100644 --- a/trunk/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/trunk/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -37,6 +38,36 @@ static struct platform_device nas100d_flash = { .resource = &nas100d_flash_resource, }; +#ifdef CONFIG_LEDS_IXP4XX +static struct resource nas100d_led_resources[] = { + { + .name = "wlan", /* green led */ + .start = 0, + .end = 0, + .flags = IXP4XX_GPIO_LOW, + }, + { + .name = "ready", /* blue power led (off is flashing!) */ + .start = 15, + .end = 15, + .flags = IXP4XX_GPIO_LOW, + }, + { + .name = "disk", /* yellow led */ + .start = 3, + .end = 3, + .flags = IXP4XX_GPIO_LOW, + }, +}; + +static struct platform_device nas100d_leds = { + .name = "IXP4XX-GPIO-LED", + .id = -1, + .num_resources = ARRAY_SIZE(nas100d_led_resources), + .resource = nas100d_led_resources, +}; +#endif + static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = { .sda_pin = NAS100D_SDA_PIN, .scl_pin = NAS100D_SCL_PIN, @@ -95,7 +126,9 @@ static struct platform_device nas100d_uart = { static struct platform_device *nas100d_devices[] __initdata = { &nas100d_i2c_controller, &nas100d_flash, - &nas100d_uart, +#ifdef CONFIG_LEDS_IXP4XX + &nas100d_leds, +#endif }; static void nas100d_power_off(void) @@ -122,6 +155,12 @@ static void __init nas100d_init(void) pm_power_off = nas100d_power_off; + /* This is only useful on a modified machine, but it is valuable + * to have it first in order to see debug messages, and so that + * it does *not* get removed if platform_add_devices fails! + */ + (void)platform_device_register(&nas100d_uart); + platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices)); } diff --git a/trunk/arch/arm/mach-ixp4xx/nslu2-setup.c b/trunk/arch/arm/mach-ixp4xx/nslu2-setup.c index 55411f21d838..749a337494d3 100644 --- a/trunk/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/trunk/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -7,6 +7,7 @@ * Copyright (C) 2003-2004 MontaVista Software, Inc. * * Author: Mark Rakes + * Author: Rod Whitby * Maintainers: http://www.nslu2-linux.org/ * * Fixed missing init_time in MACHINE_START kas11 10/22/04 @@ -16,6 +17,7 @@ #include #include #include +#include #include #include @@ -43,6 +45,42 @@ static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { .scl_pin = NSLU2_SCL_PIN, }; +#ifdef CONFIG_LEDS_IXP4XX +static struct resource nslu2_led_resources[] = { + { + .name = "ready", /* green led */ + .start = NSLU2_LED_GRN, + .end = NSLU2_LED_GRN, + .flags = IXP4XX_GPIO_HIGH, + }, + { + .name = "status", /* red led */ + .start = NSLU2_LED_RED, + .end = NSLU2_LED_RED, + .flags = IXP4XX_GPIO_HIGH, + }, + { + .name = "disk-1", + .start = NSLU2_LED_DISK1, + .end = NSLU2_LED_DISK1, + .flags = IXP4XX_GPIO_LOW, + }, + { + .name = "disk-2", + .start = NSLU2_LED_DISK2, + .end = NSLU2_LED_DISK2, + .flags = IXP4XX_GPIO_LOW, + }, +}; + +static struct platform_device nslu2_leds = { + .name = "IXP4XX-GPIO-LED", + .id = -1, + .num_resources = ARRAY_SIZE(nslu2_led_resources), + .resource = nslu2_led_resources, +}; +#endif + static struct platform_device nslu2_i2c_controller = { .name = "IXP4XX-I2C", .id = 0, @@ -102,8 +140,10 @@ static struct platform_device nslu2_uart = { static struct platform_device *nslu2_devices[] __initdata = { &nslu2_i2c_controller, &nslu2_flash, - &nslu2_uart, &nslu2_beeper, +#ifdef CONFIG_LEDS_IXP4XX + &nslu2_leds, +#endif }; static void nslu2_power_off(void) @@ -127,6 +167,12 @@ static void __init nslu2_init(void) pm_power_off = nslu2_power_off; + /* This is only useful on a modified machine, but it is valuable + * to have it first in order to see debug messages, and so that + * it does *not* get removed if platform_add_devices fails! + */ + (void)platform_device_register(&nslu2_uart); + platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); } diff --git a/trunk/arch/arm/mach-omap1/board-ams-delta.c b/trunk/arch/arm/mach-omap1/board-ams-delta.c index 6178f046f128..73df32aac4c4 100644 --- a/trunk/arch/arm/mach-omap1/board-ams-delta.c +++ b/trunk/arch/arm/mach-omap1/board-ams-delta.c @@ -84,6 +84,15 @@ static struct omap_board_config_kernel ams_delta_config[] = { { OMAP_TAG_UART, &ams_delta_uart_config }, }; +static struct platform_device ams_delta_led_device = { + .name = "ams-delta-led", + .id = -1 +}; + +static struct platform_device *ams_delta_devices[] __initdata = { + &ams_delta_led_device, +}; + static void __init ams_delta_init(void) { iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); @@ -94,6 +103,8 @@ static void __init ams_delta_init(void) /* Clear latch2 (NAND, LCD, modem enable) */ ams_delta_latch2_write(~0, 0); + + platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); } static void __init ams_delta_map_io(void) diff --git a/trunk/arch/arm/mach-pnx4008/clock.c b/trunk/arch/arm/mach-pnx4008/clock.c index 285b22f631e9..f582ed2ec43c 100644 --- a/trunk/arch/arm/mach-pnx4008/clock.c +++ b/trunk/arch/arm/mach-pnx4008/clock.c @@ -767,6 +767,54 @@ static struct clk *onchip_clks[] = { &uart6_ck, }; +static int local_clk_enable(struct clk *clk) +{ + int ret = 0; + + if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate + && clk->user_rate) + ret = clk->set_rate(clk, clk->user_rate); + return ret; +} + +static void local_clk_disable(struct clk *clk) +{ + if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate) + clk->set_rate(clk, 0); +} + +static void local_clk_unuse(struct clk *clk) +{ + if (clk->usecount > 0 && !(--clk->usecount)) { + local_clk_disable(clk); + if (clk->parent) + local_clk_unuse(clk->parent); + } +} + +static int local_clk_use(struct clk *clk) +{ + int ret = 0; + if (clk->usecount++ == 0) { + if (clk->parent) + ret = local_clk_use(clk->parent); + + if (ret != 0) { + clk->usecount--; + goto out; + } + + ret = local_clk_enable(clk); + + if (ret != 0 && clk->parent) { + local_clk_unuse(clk->parent); + clk->usecount--; + } + } +out: + return ret; +} + static int local_set_rate(struct clk *clk, u32 rate) { int ret = -EINVAL; @@ -847,28 +895,12 @@ unsigned long clk_get_rate(struct clk *clk) } EXPORT_SYMBOL(clk_get_rate); -static int local_clk_enable(struct clk *clk) -{ - int ret = 0; - - if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate - && clk->user_rate) - ret = clk->set_rate(clk, clk->user_rate); - return ret; -} - -static void local_clk_disable(struct clk *clk) -{ - if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate) - clk->set_rate(clk, 0); -} - int clk_enable(struct clk *clk) { int ret = 0; clock_lock(); - ret = local_clk_enable(clk); + ret = local_clk_use(clk); clock_unlock(); return ret; } @@ -877,71 +909,12 @@ EXPORT_SYMBOL(clk_enable); void clk_disable(struct clk *clk) { - clock_lock(); - local_clk_disable(clk); - clock_unlock(); -} - -EXPORT_SYMBOL(clk_disable); - -static void local_clk_unuse(struct clk *clk) -{ - if (clk->usecount > 0 && !(--clk->usecount)) { - local_clk_disable(clk); - if (clk->parent) - local_clk_unuse(clk->parent); - } -} - -static int local_clk_use(struct clk *clk) -{ - int ret = 0; - if (clk->usecount++ == 0) { - if (clk->parent) - ret = local_clk_use(clk->parent); - - if (ret != 0) { - clk->usecount--; - goto out; - } - - ret = local_clk_enable(clk); - - if (ret != 0 && clk->parent) { - local_clk_unuse(clk->parent); - clk->usecount--; - } - } -out: - return ret; -} - -/* The main purpose of clk_use ans clk_unuse functions - * is to control switching 13MHz oscillator and PLL1 (13'MHz), - * so that they are disabled whenever none of PLL2-5 is using them. - * Although in theory these functions should work with any clock, - * please use them only on PLL2 - PLL5 to avoid confusion. - */ -int clk_use(struct clk *clk) -{ - int ret = 0; - - clock_lock(); - ret = local_clk_use(clk); - clock_unlock(); - return ret; -} -EXPORT_SYMBOL(clk_use); - -void clk_unuse(struct clk *clk) -{ - clock_lock(); local_clk_unuse(clk); clock_unlock(); } -EXPORT_SYMBOL(clk_unuse); +EXPORT_SYMBOL(clk_disable); long clk_round_rate(struct clk *clk, unsigned long rate) { @@ -995,7 +968,7 @@ static int __init clk_init(void) __FUNCTION__, (*clkp)->name, (*clkp)->rate); } - clk_use(&ck_pll4); + local_clk_use(&ck_pll4); /* if ck_13MHz is not used, disable it. */ if (ck_13MHz.usecount == 0) diff --git a/trunk/arch/arm/mach-pnx4008/serial.c b/trunk/arch/arm/mach-pnx4008/serial.c index 10322384e45d..95a1b3f964a2 100644 --- a/trunk/arch/arm/mach-pnx4008/serial.c +++ b/trunk/arch/arm/mach-pnx4008/serial.c @@ -20,7 +20,7 @@ #include #include -#include +#include #include diff --git a/trunk/arch/arm/mach-s3c2410/Kconfig b/trunk/arch/arm/mach-s3c2410/Kconfig index 0c334136db7c..7b786d725636 100644 --- a/trunk/arch/arm/mach-s3c2410/Kconfig +++ b/trunk/arch/arm/mach-s3c2410/Kconfig @@ -114,9 +114,15 @@ config MACH_NEXCODER_2440 endmenu +config S3C2410_CLOCK + bool + help + Clock code for the S3C2410, and similar processors + config CPU_S3C2410 bool depends on ARCH_S3C2410 + select S3C2410_CLOCK help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. @@ -130,6 +136,7 @@ config CPU_S3C244X config CPU_S3C2440 bool depends on ARCH_S3C2410 + select S3C2410_CLOCK select CPU_S3C244X help Support for S3C2440 Samsung Mobile CPU based systems. @@ -137,6 +144,7 @@ config CPU_S3C2440 config CPU_S3C2442 bool depends on ARCH_S3C2420 + select S3C2410_CLOCK select CPU_S3C244X help Support for S3C2442 Samsung Mobile CPU based systems. diff --git a/trunk/arch/arm/mach-s3c2410/Makefile b/trunk/arch/arm/mach-s3c2410/Makefile index 5e09355cd4f4..372dbcea1434 100644 --- a/trunk/arch/arm/mach-s3c2410/Makefile +++ b/trunk/arch/arm/mach-s3c2410/Makefile @@ -29,6 +29,10 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_CPU_S3C244X) += s3c244x.o obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o +# Clock control + +obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o + # S3C2440 support obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o diff --git a/trunk/arch/arm/mach-s3c2410/clock.c b/trunk/arch/arm/mach-s3c2410/clock.c index 99d174612b53..c5c93c333ac6 100644 --- a/trunk/arch/arm/mach-s3c2410/clock.c +++ b/trunk/arch/arm/mach-s3c2410/clock.c @@ -3,7 +3,7 @@ * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks * - * S3C2410 Clock control support + * S3C24XX Core clock control support * * Based on, and code from linux/arch/arm/mach-versatile/clock.c ** @@ -56,25 +56,6 @@ static LIST_HEAD(clocks); DEFINE_MUTEX(clocks_mutex); -/* old functions */ - -void inline s3c24xx_clk_enable(unsigned int clocks, unsigned int enable) -{ - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - /* ensure none of the special function bits set */ - clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER | 3); - - __raw_writel(clkcon, S3C2410_CLKCON); -} - /* enable and disable calls for use with the clk struct */ static int clk_null_enable(struct clk *clk, int enable) @@ -82,12 +63,6 @@ static int clk_null_enable(struct clk *clk, int enable) return 0; } -int s3c24xx_clkcon_enable(struct clk *clk, int enable) -{ - s3c24xx_clk_enable(clk->ctrlbit, enable); - return 0; -} - /* Clock API calls */ struct clk *clk_get(struct device *dev, const char *id) @@ -173,8 +148,11 @@ unsigned long clk_get_rate(struct clk *clk) if (clk->rate != 0) return clk->rate; - while (clk->parent != NULL && clk->rate == 0) - clk = clk->parent; + if (clk->get_rate != NULL) + return (clk->get_rate)(clk); + + if (clk->parent != NULL) + return clk_get_rate(clk->parent); return clk->rate; } @@ -233,28 +211,6 @@ EXPORT_SYMBOL(clk_set_rate); EXPORT_SYMBOL(clk_get_parent); EXPORT_SYMBOL(clk_set_parent); -/* base clock enable */ - -static int s3c24xx_upll_enable(struct clk *clk, int enable) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long orig = clkslow; - - if (enable) - clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; - else - clkslow |= S3C2410_CLKSLOW_UCLK_OFF; - - __raw_writel(clkslow, S3C2410_CLKSLOW); - - /* if we started the UPLL, then allow to settle */ - - if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF)) - udelay(200); - - return 0; -} - /* base clocks */ static struct clk clk_xtal = { @@ -265,15 +221,14 @@ static struct clk clk_xtal = { .ctrlbit = 0, }; -static struct clk clk_upll = { +struct clk clk_upll = { .name = "upll", .id = -1, .parent = NULL, - .enable = s3c24xx_upll_enable, .ctrlbit = 0, }; -static struct clk clk_f = { +struct clk clk_f = { .name = "fclk", .id = -1, .rate = 0, @@ -281,7 +236,7 @@ static struct clk clk_f = { .ctrlbit = 0, }; -static struct clk clk_h = { +struct clk clk_h = { .name = "hclk", .id = -1, .rate = 0, @@ -289,7 +244,7 @@ static struct clk clk_h = { .ctrlbit = 0, }; -static struct clk clk_p = { +struct clk clk_p = { .name = "pclk", .id = -1, .rate = 0, @@ -426,108 +381,6 @@ struct clk s3c24xx_uclk = { .id = -1, }; - -/* standard clock definitions */ - -static struct clk init_clocks[] = { - { - .name = "nand", - .id = -1, - .parent = &clk_h, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_NAND, - }, { - .name = "lcd", - .id = -1, - .parent = &clk_h, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_LCDC, - }, { - .name = "usb-host", - .id = -1, - .parent = &clk_h, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBH, - }, { - .name = "usb-device", - .id = -1, - .parent = &clk_h, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBD, - }, { - .name = "timers", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_PWMT, - }, { - .name = "sdi", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SDI, - }, { - .name = "uart", - .id = 0, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART2, - }, { - .name = "gpio", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_GPIO, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_RTC, - }, { - .name = "adc", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_ADC, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIC, - }, { - .name = "iis", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIS, - }, { - .name = "spi", - .id = -1, - .parent = &clk_p, - .enable = s3c24xx_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SPI, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_p, - .ctrlbit = 0, - } -}; - /* initialise the clock system */ int s3c24xx_register_clock(struct clk *clk) @@ -537,14 +390,6 @@ int s3c24xx_register_clock(struct clk *clk) if (clk->enable == NULL) clk->enable = clk_null_enable; - /* if this is a standard clock, set the usage state */ - - if (clk->ctrlbit && clk->enable == s3c24xx_clkcon_enable) { - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - - clk->usage = (clkcon & clk->ctrlbit) ? 1 : 0; - } - /* add to the list of available clocks */ mutex_lock(&clocks_mutex); @@ -561,44 +406,17 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, unsigned long hclk, unsigned long pclk) { - unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - struct clk *clkp = init_clocks; - int ptr; - int ret; - - printk(KERN_INFO "S3C2410 Clocks, (c) 2004 Simtec Electronics\n"); + printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n"); /* initialise the main system clocks */ clk_xtal.rate = xtal; - clk_upll.rate = s3c2410_get_pll(upllcon, xtal); + clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal); clk_h.rate = hclk; clk_p.rate = pclk; clk_f.rate = fclk; - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsytems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - mutex_lock(&clocks_mutex); - - s3c24xx_clk_enable(S3C2410_CLKCON_NAND, 0); - s3c24xx_clk_enable(S3C2410_CLKCON_USBH, 0); - s3c24xx_clk_enable(S3C2410_CLKCON_USBD, 0); - s3c24xx_clk_enable(S3C2410_CLKCON_ADC, 0); - s3c24xx_clk_enable(S3C2410_CLKCON_IIC, 0); - s3c24xx_clk_enable(S3C2410_CLKCON_SPI, 0); - - mutex_unlock(&clocks_mutex); - /* assume uart clocks are correctly setup */ /* register our clocks */ @@ -618,27 +436,5 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, if (s3c24xx_register_clock(&clk_p) < 0) printk(KERN_ERR "failed to register cpu pclk\n"); - - if (s3c24xx_register_clock(&clk_usb_bus) < 0) - printk(KERN_ERR "failed to register usb bus clock\n"); - - /* register clocks from clock array */ - - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* show the clock-slow value */ - - printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n", - print_mhz(xtal / ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))), - (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast", - (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on", - (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on"); - return 0; } diff --git a/trunk/arch/arm/mach-s3c2410/clock.h b/trunk/arch/arm/mach-s3c2410/clock.h index 01bb458bf8eb..9456c81eb5d3 100644 --- a/trunk/arch/arm/mach-s3c2410/clock.h +++ b/trunk/arch/arm/mach-s3c2410/clock.h @@ -22,6 +22,7 @@ struct clk { int (*enable)(struct clk *, int enable); int (*set_rate)(struct clk *c, unsigned long rate); + unsigned long (*get_rate)(struct clk *c); unsigned long (*round_rate)(struct clk *c, unsigned long rate); int (*set_parent)(struct clk *c, struct clk *parent); }; @@ -36,6 +37,13 @@ extern struct clk s3c24xx_uclk; extern struct clk clk_usb_bus; +/* core clock support */ + +extern struct clk clk_f; +extern struct clk clk_h; +extern struct clk clk_p; +extern struct clk clk_upll; + /* exports for arch/arm/mach-s3c2410 * * Please DO NOT use these outside of arch/arm/mach-s3c2410 @@ -43,7 +51,8 @@ extern struct clk clk_usb_bus; extern struct mutex clocks_mutex; -extern int s3c24xx_clkcon_enable(struct clk *clk, int enable); +extern int s3c2410_clkcon_enable(struct clk *clk, int enable); + extern int s3c24xx_register_clock(struct clk *clk); extern int s3c24xx_setup_clocks(unsigned long xtal, diff --git a/trunk/arch/arm/mach-s3c2410/cpu.h b/trunk/arch/arm/mach-s3c2410/cpu.h index 40862899b2f1..21c62dc29bb2 100644 --- a/trunk/arch/arm/mach-s3c2410/cpu.h +++ b/trunk/arch/arm/mach-s3c2410/cpu.h @@ -73,5 +73,6 @@ extern struct sys_timer s3c24xx_timer; /* system device classes */ +extern struct sysdev_class s3c2410_sysclass; extern struct sysdev_class s3c2440_sysclass; extern struct sysdev_class s3c2442_sysclass; diff --git a/trunk/arch/arm/mach-s3c2410/s3c2410-clock.c b/trunk/arch/arm/mach-s3c2410/s3c2410-clock.c new file mode 100644 index 000000000000..fd17c60e1132 --- /dev/null +++ b/trunk/arch/arm/mach-s3c2410/s3c2410-clock.c @@ -0,0 +1,263 @@ +/* linux/arch/arm/mach-s3c2410/clock.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * S3C2410,S3C2440,S3C2442 Clock control support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "clock.h" +#include "cpu.h" + +int s3c2410_clkcon_enable(struct clk *clk, int enable) +{ + unsigned int clocks = clk->ctrlbit; + unsigned long clkcon; + + clkcon = __raw_readl(S3C2410_CLKCON); + + if (enable) + clkcon |= clocks; + else + clkcon &= ~clocks; + + /* ensure none of the special function bits set */ + clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); + + __raw_writel(clkcon, S3C2410_CLKCON); + + return 0; +} + +static int s3c2410_upll_enable(struct clk *clk, int enable) +{ + unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); + unsigned long orig = clkslow; + + if (enable) + clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; + else + clkslow |= S3C2410_CLKSLOW_UCLK_OFF; + + __raw_writel(clkslow, S3C2410_CLKSLOW); + + /* if we started the UPLL, then allow to settle */ + + if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF)) + udelay(200); + + return 0; +} + +/* standard clock definitions */ + +static struct clk init_clocks_disable[] = { + { + .name = "nand", + .id = -1, + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_NAND, + }, { + .name = "sdi", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_SDI, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_ADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_IIC, + }, { + .name = "iis", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_IIS, + }, { + .name = "spi", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_SPI, + } +}; + +static struct clk init_clocks[] = { + { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_LCDC, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_GPIO, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_USBH, + }, { + .name = "usb-device", + .id = -1, + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_USBD, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_PWMT, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART2, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_RTC, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .ctrlbit = 0, + } +}; + +/* s3c2410_baseclk_add() + * + * Add all the clocks used by the s3c2410 or compatible CPUs + * such as the S3C2440 and S3C2442. + * + * We cannot use a system device as we are needed before any + * of the init-calls that initialise the devices are actually + * done. +*/ + +int __init s3c2410_baseclk_add(void) +{ + unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); + unsigned long clkcon = __raw_readl(S3C2410_CLKCON); + struct clk *clkp; + struct clk *xtal; + int ret; + int ptr; + + clk_upll.enable = s3c2410_upll_enable; + + if (s3c24xx_register_clock(&clk_usb_bus) < 0) + printk(KERN_ERR "failed to register usb bus clock\n"); + + /* register clocks from clock array */ + + clkp = init_clocks; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { + /* ensure that we note the clock state */ + + clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } + + /* We must be careful disabling the clocks we are not intending to + * be using at boot time, as subsytems such as the LCD which do + * their own DMA requests to the bus can cause the system to lockup + * if they where in the middle of requesting bus access. + * + * Disabling the LCD clock if the LCD is active is very dangerous, + * and therefore the bootloader should be careful to not enable + * the LCD clock if it is not needed. + */ + + /* install (and disable) the clocks we do not need immediately */ + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + + s3c2410_clkcon_enable(clkp, 0); + } + + /* show the clock-slow value */ + + xtal = clk_get(NULL, "xtal"); + + printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n", + print_mhz(clk_get_rate(xtal) / + ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))), + (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast", + (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on", + (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on"); + + return 0; +} diff --git a/trunk/arch/arm/mach-s3c2410/s3c2410.c b/trunk/arch/arm/mach-s3c2410/s3c2410.c index 0852e87a79c4..a110cff9cf6b 100644 --- a/trunk/arch/arm/mach-s3c2410/s3c2410.c +++ b/trunk/arch/arm/mach-s3c2410/s3c2410.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -108,11 +109,33 @@ void __init s3c2410_init_clocks(int xtal) */ s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); + s3c2410_baseclk_add(); } +struct sysdev_class s3c2410_sysclass = { + set_kset_name("s3c2410-core"), +}; + +static struct sys_device s3c2410_sysdev = { + .cls = &s3c2410_sysclass, +}; + +/* need to register class before we actually register the device, and + * we also need to ensure that it has been initialised before any of the + * drivers even try to use it (even if not on an s3c2440 based system) + * as a driver which may support both 2410 and 2440 may try and use it. +*/ + +static int __init s3c2410_core_init(void) +{ + return sysdev_class_register(&s3c2410_sysclass); +} + +core_initcall(s3c2410_core_init); + int __init s3c2410_init(void) { printk("S3C2410: Initialising architecture\n"); - return 0; + return sysdev_register(&s3c2410_sysdev); } diff --git a/trunk/arch/arm/mach-s3c2410/s3c2410.h b/trunk/arch/arm/mach-s3c2410/s3c2410.h index 4d5312a48209..73f1a2474a61 100644 --- a/trunk/arch/arm/mach-s3c2410/s3c2410.h +++ b/trunk/arch/arm/mach-s3c2410/s3c2410.h @@ -29,6 +29,8 @@ extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2410_init_clocks(int xtal); +extern int s3c2410_baseclk_add(void); + #else #define s3c2410_init_clocks NULL #define s3c2410_init_uarts NULL diff --git a/trunk/arch/arm/mach-s3c2410/s3c2440-clock.c b/trunk/arch/arm/mach-s3c2410/s3c2440-clock.c index d7a30ed6c327..15796864d010 100644 --- a/trunk/arch/arm/mach-s3c2410/s3c2440-clock.c +++ b/trunk/arch/arm/mach-s3c2410/s3c2440-clock.c @@ -91,7 +91,7 @@ static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate) static struct clk s3c2440_clk_cam = { .name = "camif", .id = -1, - .enable = s3c24xx_clkcon_enable, + .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2440_CLKCON_CAMERA, }; @@ -105,7 +105,7 @@ static struct clk s3c2440_clk_cam_upll = { static struct clk s3c2440_clk_ac97 = { .name = "ac97", .id = -1, - .enable = s3c24xx_clkcon_enable, + .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2440_CLKCON_CAMERA, }; diff --git a/trunk/arch/arm/mach-s3c2410/s3c2442-clock.c b/trunk/arch/arm/mach-s3c2410/s3c2442-clock.c index 5b7b301eb522..d9f54b5cab7f 100644 --- a/trunk/arch/arm/mach-s3c2410/s3c2442-clock.c +++ b/trunk/arch/arm/mach-s3c2410/s3c2442-clock.c @@ -102,7 +102,7 @@ static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate) static struct clk s3c2442_clk_cam = { .name = "camif", .id = -1, - .enable = s3c24xx_clkcon_enable, + .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2440_CLKCON_CAMERA, }; diff --git a/trunk/arch/arm/mach-s3c2410/s3c244x.c b/trunk/arch/arm/mach-s3c2410/s3c244x.c index 96852a7000db..838bc525e836 100644 --- a/trunk/arch/arm/mach-s3c2410/s3c244x.c +++ b/trunk/arch/arm/mach-s3c2410/s3c244x.c @@ -34,6 +34,7 @@ #include #include +#include "s3c2410.h" #include "s3c2440.h" #include "s3c244x.h" #include "clock.h" @@ -118,6 +119,7 @@ void __init s3c244x_init_clocks(int xtal) */ s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); + s3c2410_baseclk_add(); } #ifdef CONFIG_PM diff --git a/trunk/arch/arm/nwfpe/fpmodule.c b/trunk/arch/arm/nwfpe/fpmodule.c index 2dfe1ac42ee8..7d977d23f026 100644 --- a/trunk/arch/arm/nwfpe/fpmodule.c +++ b/trunk/arch/arm/nwfpe/fpmodule.c @@ -33,7 +33,8 @@ #include #include #include -/* XXX */ + +#include #include "softfloat.h" #include "fpopcode.h" @@ -56,16 +57,28 @@ void fp_send_sig(unsigned long sig, struct task_struct *p, int priv); extern char fpe_type[]; #endif +static int nwfpe_notify(struct notifier_block *self, unsigned long cmd, void *v) +{ + struct thread_info *thread = v; + + if (cmd == THREAD_NOTIFY_FLUSH) + nwfpe_init_fpa(&thread->fpstate); + + return NOTIFY_DONE; +} + +static struct notifier_block nwfpe_notifier_block = { + .notifier_call = nwfpe_notify, +}; + /* kernel function prototypes required */ void fp_setup(void); /* external declarations for saved kernel symbols */ extern void (*kern_fp_enter)(void); -extern void (*fp_init)(union fp_state *); /* Original value of fp_enter from kernel before patched by fpe_init. */ static void (*orig_fp_enter)(void); -static void (*orig_fp_init)(union fp_state *); /* forward declarations */ extern void nwfpe_enter(void); @@ -88,20 +101,20 @@ static int __init fpe_init(void) printk(KERN_WARNING "NetWinder Floating Point Emulator V0.97 (" NWFPE_BITS " precision)\n"); + thread_register_notifier(&nwfpe_notifier_block); + /* Save pointer to the old FP handler and then patch ourselves in */ orig_fp_enter = kern_fp_enter; - orig_fp_init = fp_init; kern_fp_enter = nwfpe_enter; - fp_init = nwfpe_init_fpa; return 0; } static void __exit fpe_exit(void) { + thread_unregister_notifier(&nwfpe_notifier_block); /* Restore the values we saved earlier. */ kern_fp_enter = orig_fp_enter; - fp_init = orig_fp_init; } /* diff --git a/trunk/arch/arm/plat-omap/timer32k.c b/trunk/arch/arm/plat-omap/timer32k.c index b2a943bf11ef..3461a6c9665c 100644 --- a/trunk/arch/arm/plat-omap/timer32k.c +++ b/trunk/arch/arm/plat-omap/timer32k.c @@ -210,7 +210,8 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, now = omap_32k_sync_timer_read(); - while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) { + while ((signed long)(now - omap_32k_last_tick) + >= OMAP_32K_TICKS_PER_HZ) { omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ; timer_tick(regs); } diff --git a/trunk/arch/arm/vfp/Makefile b/trunk/arch/arm/vfp/Makefile index afabac31dd1d..7e136e77971a 100644 --- a/trunk/arch/arm/vfp/Makefile +++ b/trunk/arch/arm/vfp/Makefile @@ -7,6 +7,9 @@ # EXTRA_CFLAGS := -DDEBUG # EXTRA_AFLAGS := -DDEBUG +AFLAGS :=$(AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp) +LDFLAGS +=--no-warn-mismatch + obj-y += vfp.o -vfp-$(CONFIG_VFP) += entry.o vfpmodule.o vfphw.o vfpsingle.o vfpdouble.o +vfp-$(CONFIG_VFP) += vfpmodule.o entry.o vfphw.o vfpsingle.o vfpdouble.o diff --git a/trunk/arch/arm/vfp/vfphw.S b/trunk/arch/arm/vfp/vfphw.S index a3f65b47aea9..eb683cd77163 100644 --- a/trunk/arch/arm/vfp/vfphw.S +++ b/trunk/arch/arm/vfp/vfphw.S @@ -192,7 +192,7 @@ vfp_get_double: add pc, pc, r0, lsl #3 mov r0, r0 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 - mrrc p11, 1, r0, r1, c\dr @ fmrrd r0, r1, d\dr + fmrrd r0, r1, d\dr mov pc, lr .endr @@ -206,6 +206,6 @@ vfp_put_double: add pc, pc, r0, lsl #3 mov r0, r0 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 - mcrr p11, 1, r1, r2, c\dr @ fmdrr r1, r2, d\dr + fmdrr d\dr, r1, r2 mov pc, lr .endr diff --git a/trunk/arch/arm/vfp/vfpmodule.c b/trunk/arch/arm/vfp/vfpmodule.c index 03486be04193..2476f4c2e760 100644 --- a/trunk/arch/arm/vfp/vfpmodule.c +++ b/trunk/arch/arm/vfp/vfpmodule.c @@ -15,6 +15,8 @@ #include #include #include + +#include #include #include "vfpinstr.h" @@ -36,38 +38,55 @@ union vfp_state *last_VFP_context; */ unsigned int VFP_arch; -/* - * Per-thread VFP initialisation. - */ -void vfp_flush_thread(union vfp_state *vfp) +static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) { - memset(vfp, 0, sizeof(union vfp_state)); + struct thread_info *thread = v; + union vfp_state *vfp = &thread->vfpstate; - vfp->hard.fpexc = FPEXC_ENABLE; - vfp->hard.fpscr = FPSCR_ROUND_NEAREST; + switch (cmd) { + case THREAD_NOTIFY_FLUSH: + /* + * Per-thread VFP initialisation. + */ + memset(vfp, 0, sizeof(union vfp_state)); - /* - * Disable VFP to ensure we initialise it first. - */ - fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE); + vfp->hard.fpexc = FPEXC_ENABLE; + vfp->hard.fpscr = FPSCR_ROUND_NEAREST; - /* - * Ensure we don't try to overwrite our newly initialised - * state information on the first fault. - */ - if (last_VFP_context == vfp) - last_VFP_context = NULL; -} + /* + * Disable VFP to ensure we initialise it first. + */ + fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE); -/* - * Per-thread VFP cleanup. - */ -void vfp_release_thread(union vfp_state *vfp) -{ - if (last_VFP_context == vfp) - last_VFP_context = NULL; + /* + * FALLTHROUGH: Ensure we don't try to overwrite our newly + * initialised state information on the first fault. + */ + + case THREAD_NOTIFY_RELEASE: + /* + * Per-thread VFP cleanup. + */ + if (last_VFP_context == vfp) + last_VFP_context = NULL; + break; + + case THREAD_NOTIFY_SWITCH: + /* + * Always disable VFP so we can lazily save/restore the + * old state. + */ + fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE); + break; + } + + return NOTIFY_DONE; } +static struct notifier_block vfp_notifier_block = { + .notifier_call = vfp_notifier, +}; + /* * Raise a SIGFPE for the current process. * sicode describes the signal being raised. @@ -281,6 +300,8 @@ static int __init vfp_init(void) (vfpsid & FPSID_VARIANT_MASK) >> FPSID_VARIANT_BIT, (vfpsid & FPSID_REV_MASK) >> FPSID_REV_BIT); vfp_vector = vfp_support_entry; + + thread_register_notifier(&vfp_notifier_block); } return 0; } diff --git a/trunk/arch/frv/kernel/entry.S b/trunk/arch/frv/kernel/entry.S index a9b59527a741..81d94e41a189 100644 --- a/trunk/arch/frv/kernel/entry.S +++ b/trunk/arch/frv/kernel/entry.S @@ -1474,7 +1474,7 @@ sys_call_table: .long sys_mknodat .long sys_fchownat .long sys_futimesat - .long sys_newfstatat /* 300 */ + .long sys_fstatat64 /* 300 */ .long sys_unlinkat .long sys_renameat .long sys_linkat diff --git a/trunk/arch/frv/kernel/frv_ksyms.c b/trunk/arch/frv/kernel/frv_ksyms.c index 0f273a7aca5a..dee637fffda5 100644 --- a/trunk/arch/frv/kernel/frv_ksyms.c +++ b/trunk/arch/frv/kernel/frv_ksyms.c @@ -26,16 +26,6 @@ extern long __memset_user(void *dst, const void *src, size_t count); EXPORT_SYMBOL(__ioremap); EXPORT_SYMBOL(iounmap); -EXPORT_SYMBOL(strnlen); -EXPORT_SYMBOL(strrchr); -EXPORT_SYMBOL(strstr); -EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strcmp); -EXPORT_SYMBOL(strncmp); -EXPORT_SYMBOL(strncpy); - EXPORT_SYMBOL(ip_fast_csum); #if 0 @@ -44,8 +34,6 @@ EXPORT_SYMBOL(local_bh_count); #endif EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(enable_irq); -EXPORT_SYMBOL(disable_irq); EXPORT_SYMBOL(__res_bus_clock_speed_HZ); EXPORT_SYMBOL(__page_offset); EXPORT_SYMBOL(__memcpy_user); @@ -62,18 +50,12 @@ EXPORT_SYMBOL(memory_end); EXPORT_SYMBOL(__debug_bug_trap); -/* Networking helper routines. */ -EXPORT_SYMBOL(csum_partial_copy); - /* The following are special because they're not called explicitly (the C compiler generates them). Fortunately, their interface isn't gonna change any time soon now, so it's OK to leave it out of version control. */ EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memset); -EXPORT_SYMBOL(memcmp); -EXPORT_SYMBOL(memscan); -EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(__outsl_ns); EXPORT_SYMBOL(__insl_ns); diff --git a/trunk/arch/frv/kernel/irq-routing.c b/trunk/arch/frv/kernel/irq-routing.c index d4776d1f4e82..b90b70a761d1 100644 --- a/trunk/arch/frv/kernel/irq-routing.c +++ b/trunk/arch/frv/kernel/irq-routing.c @@ -112,7 +112,7 @@ struct irq_source frv_cpuuart[2] = { #define __CPUUART(X, A) \ [X] = { \ .muxname = "uart", \ - .muxdata = (volatile void __iomem *) A, \ + .muxdata = (volatile void __iomem *)(unsigned long)A,\ .irqmask = 1 << IRQ_CPU_UART##X, \ .doirq = frv_cpuuart_doirq, \ } @@ -136,7 +136,7 @@ struct irq_source frv_cpudma[8] = { #define __CPUDMA(X, A) \ [X] = { \ .muxname = "dma", \ - .muxdata = (volatile void __iomem *) A, \ + .muxdata = (volatile void __iomem *)(unsigned long)A,\ .irqmask = 1 << IRQ_CPU_DMA##X, \ .doirq = frv_cpudma_doirq, \ } @@ -164,7 +164,7 @@ struct irq_source frv_cputimer[3] = { #define __CPUTIMER(X) \ [X] = { \ .muxname = "timer", \ - .muxdata = 0, \ + .muxdata = NULL, \ .irqmask = 1 << IRQ_CPU_TIMER##X, \ .doirq = frv_cputimer_doirq, \ } @@ -187,7 +187,7 @@ struct irq_source frv_cpuexternal[8] = { #define __CPUEXTERNAL(X) \ [X] = { \ .muxname = "ext", \ - .muxdata = 0, \ + .muxdata = NULL, \ .irqmask = 1 << IRQ_CPU_EXTERNAL##X, \ .doirq = frv_cpuexternal_doirq, \ } diff --git a/trunk/arch/frv/kernel/irq.c b/trunk/arch/frv/kernel/irq.c index 11fa326a8f62..8b112b361914 100644 --- a/trunk/arch/frv/kernel/irq.c +++ b/trunk/arch/frv/kernel/irq.c @@ -625,7 +625,7 @@ static struct proc_dir_entry * irq_dir [NR_IRQS]; #define HEX_DIGITS 8 -static unsigned int parse_hex_value (const char *buffer, +static unsigned int parse_hex_value (const char __user *buffer, unsigned long count, unsigned long *ret) { unsigned char hexnum [HEX_DIGITS]; @@ -672,7 +672,7 @@ static int prof_cpu_mask_read_proc (char *page, char **start, off_t off, return sprintf (page, "%08lx\n", *mask); } -static int prof_cpu_mask_write_proc (struct file *file, const char *buffer, +static int prof_cpu_mask_write_proc (struct file *file, const char __user *buffer, unsigned long count, void *data) { unsigned long *mask = (unsigned long *) data, full_count = count, err; @@ -711,7 +711,7 @@ void init_irq_proc (void) int i; /* create /proc/irq */ - root_irq_dir = proc_mkdir("irq", 0); + root_irq_dir = proc_mkdir("irq", NULL); /* create /proc/irq/prof_cpu_mask */ entry = create_proc_entry("prof_cpu_mask", 0600, root_irq_dir); diff --git a/trunk/arch/frv/kernel/pm.c b/trunk/arch/frv/kernel/pm.c index f0b8fff3e733..43ce28a13a5d 100644 --- a/trunk/arch/frv/kernel/pm.c +++ b/trunk/arch/frv/kernel/pm.c @@ -137,7 +137,7 @@ unsigned long sleep_phys_sp(void *sp) #define CTL_PM_P0 4 #define CTL_PM_CM 5 -static int user_atoi(char *ubuf, size_t len) +static int user_atoi(char __user *ubuf, size_t len) { char buf[16]; unsigned long ret; @@ -159,7 +159,7 @@ static int user_atoi(char *ubuf, size_t len) * Send us to sleep. */ static int sysctl_pm_do_suspend(ctl_table *ctl, int write, struct file *filp, - void *buffer, size_t *lenp, loff_t *fpos) + void __user *buffer, size_t *lenp, loff_t *fpos) { int retval, mode; @@ -215,7 +215,7 @@ static int try_set_cmode(int new_cmode) static int cmode_procctl(ctl_table *ctl, int write, struct file *filp, - void *buffer, size_t *lenp, loff_t *fpos) + void __user *buffer, size_t *lenp, loff_t *fpos) { int new_cmode; @@ -227,9 +227,9 @@ static int cmode_procctl(ctl_table *ctl, int write, struct file *filp, return try_set_cmode(new_cmode)?:*lenp; } -static int cmode_sysctl(ctl_table *table, int *name, int nlen, - void *oldval, size_t *oldlenp, - void *newval, size_t newlen, void **context) +static int cmode_sysctl(ctl_table *table, int __user *name, int nlen, + void __user *oldval, size_t __user *oldlenp, + void __user *newval, size_t newlen, void **context) { if (oldval && oldlenp) { size_t oldlen; @@ -240,7 +240,7 @@ static int cmode_sysctl(ctl_table *table, int *name, int nlen, if (oldlen != sizeof(int)) return -EINVAL; - if (put_user(clock_cmode_current, (unsigned int *)oldval) || + if (put_user(clock_cmode_current, (unsigned __user *)oldval) || put_user(sizeof(int), oldlenp)) return -EFAULT; } @@ -250,7 +250,7 @@ static int cmode_sysctl(ctl_table *table, int *name, int nlen, if (newlen != sizeof(int)) return -EINVAL; - if (get_user(new_cmode, (int *)newval)) + if (get_user(new_cmode, (int __user *)newval)) return -EFAULT; return try_set_cmode(new_cmode)?:1; @@ -318,7 +318,7 @@ static int try_set_cm(int new_cm) } static int p0_procctl(ctl_table *ctl, int write, struct file *filp, - void *buffer, size_t *lenp, loff_t *fpos) + void __user *buffer, size_t *lenp, loff_t *fpos) { int new_p0; @@ -330,9 +330,9 @@ static int p0_procctl(ctl_table *ctl, int write, struct file *filp, return try_set_p0(new_p0)?:*lenp; } -static int p0_sysctl(ctl_table *table, int *name, int nlen, - void *oldval, size_t *oldlenp, - void *newval, size_t newlen, void **context) +static int p0_sysctl(ctl_table *table, int __user *name, int nlen, + void __user *oldval, size_t __user *oldlenp, + void __user *newval, size_t newlen, void **context) { if (oldval && oldlenp) { size_t oldlen; @@ -343,7 +343,7 @@ static int p0_sysctl(ctl_table *table, int *name, int nlen, if (oldlen != sizeof(int)) return -EINVAL; - if (put_user(clock_p0_current, (unsigned int *)oldval) || + if (put_user(clock_p0_current, (unsigned __user *)oldval) || put_user(sizeof(int), oldlenp)) return -EFAULT; } @@ -353,7 +353,7 @@ static int p0_sysctl(ctl_table *table, int *name, int nlen, if (newlen != sizeof(int)) return -EINVAL; - if (get_user(new_p0, (int *)newval)) + if (get_user(new_p0, (int __user *)newval)) return -EFAULT; return try_set_p0(new_p0)?:1; @@ -362,7 +362,7 @@ static int p0_sysctl(ctl_table *table, int *name, int nlen, } static int cm_procctl(ctl_table *ctl, int write, struct file *filp, - void *buffer, size_t *lenp, loff_t *fpos) + void __user *buffer, size_t *lenp, loff_t *fpos) { int new_cm; @@ -374,9 +374,9 @@ static int cm_procctl(ctl_table *ctl, int write, struct file *filp, return try_set_cm(new_cm)?:*lenp; } -static int cm_sysctl(ctl_table *table, int *name, int nlen, - void *oldval, size_t *oldlenp, - void *newval, size_t newlen, void **context) +static int cm_sysctl(ctl_table *table, int __user *name, int nlen, + void __user *oldval, size_t __user *oldlenp, + void __user *newval, size_t newlen, void **context) { if (oldval && oldlenp) { size_t oldlen; @@ -387,7 +387,7 @@ static int cm_sysctl(ctl_table *table, int *name, int nlen, if (oldlen != sizeof(int)) return -EINVAL; - if (put_user(clock_cm_current, (unsigned int *)oldval) || + if (put_user(clock_cm_current, (unsigned __user *)oldval) || put_user(sizeof(int), oldlenp)) return -EFAULT; } @@ -397,7 +397,7 @@ static int cm_sysctl(ctl_table *table, int *name, int nlen, if (newlen != sizeof(int)) return -EINVAL; - if (get_user(new_cm, (int *)newval)) + if (get_user(new_cm, (int __user *)newval)) return -EFAULT; return try_set_cm(new_cm)?:1; diff --git a/trunk/arch/frv/kernel/process.c b/trunk/arch/frv/kernel/process.c index 0fff8a61ef2a..489e6c489cbe 100644 --- a/trunk/arch/frv/kernel/process.c +++ b/trunk/arch/frv/kernel/process.c @@ -246,7 +246,7 @@ int copy_thread(int nr, unsigned long clone_flags, /* * sys_execve() executes a new program. */ -asmlinkage int sys_execve(char *name, char **argv, char **envp) +asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __user * __user *envp) { int error; char * filename; diff --git a/trunk/arch/frv/kernel/setup.c b/trunk/arch/frv/kernel/setup.c index 5908deae9607..1f7d65f29e78 100644 --- a/trunk/arch/frv/kernel/setup.c +++ b/trunk/arch/frv/kernel/setup.c @@ -814,7 +814,7 @@ void __init setup_arch(char **cmdline_p) * - by now the stack is part of the init task */ printk("Memory %08lx-%08lx\n", memory_start, memory_end); - if (memory_start == memory_end) BUG(); + BUG_ON(memory_start == memory_end); init_mm.start_code = (unsigned long) &_stext; init_mm.end_code = (unsigned long) &_etext; diff --git a/trunk/arch/frv/kernel/signal.c b/trunk/arch/frv/kernel/signal.c index 679c1d5cc958..b8a5882b8625 100644 --- a/trunk/arch/frv/kernel/signal.c +++ b/trunk/arch/frv/kernel/signal.c @@ -98,7 +98,7 @@ int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss) struct sigframe { - void (*pretcode)(void); + __sigrestore_t pretcode; int sig; struct sigcontext sc; unsigned long extramask[_NSIG_WORDS-1]; @@ -107,10 +107,10 @@ struct sigframe struct rt_sigframe { - void (*pretcode)(void); + __sigrestore_t pretcode; int sig; - struct siginfo *pinfo; - void *puc; + struct siginfo __user *pinfo; + void __user *puc; struct siginfo info; struct ucontext uc; uint32_t retcode[2]; @@ -233,7 +233,7 @@ static inline void __user *get_sigframe(struct k_sigaction *ka, /* This is the X/Open sanctioned signal stack switching. */ if (ka->sa.sa_flags & SA_ONSTACK) { - if (! on_sig_stack(sp)) + if (! sas_ss_flags(sp)) sp = current->sas_ss_sp + current->sas_ss_size; } @@ -284,7 +284,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set) * setlos #__NR_sigreturn,gr7 * tira gr0,0 */ - if (__put_user((void (*)(void))frame->retcode, &frame->pretcode) || + if (__put_user((__sigrestore_t)frame->retcode, &frame->pretcode) || __put_user(0x8efc0000|__NR_sigreturn, &frame->retcode[0]) || __put_user(0xc0700000, &frame->retcode[1])) goto give_sigsegv; @@ -300,7 +300,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set) if (get_personality & FDPIC_FUNCPTRS) { struct fdpic_func_descriptor __user *funcptr = - (struct fdpic_func_descriptor *) ka->sa.sa_handler; + (struct fdpic_func_descriptor __user *) ka->sa.sa_handler; __get_user(__frame->pc, &funcptr->text); __get_user(__frame->gr15, &funcptr->GOT); } else { @@ -359,8 +359,8 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, /* Create the ucontext. */ if (__put_user(0, &frame->uc.uc_flags) || - __put_user(0, &frame->uc.uc_link) || - __put_user((void*)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp) || + __put_user(NULL, &frame->uc.uc_link) || + __put_user((void __user *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp) || __put_user(sas_ss_flags(__frame->sp), &frame->uc.uc_stack.ss_flags) || __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size)) goto give_sigsegv; @@ -382,7 +382,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, * setlos #__NR_sigreturn,gr7 * tira gr0,0 */ - if (__put_user((void (*)(void))frame->retcode, &frame->pretcode) || + if (__put_user((__sigrestore_t)frame->retcode, &frame->pretcode) || __put_user(0x8efc0000|__NR_rt_sigreturn, &frame->retcode[0]) || __put_user(0xc0700000, &frame->retcode[1])) goto give_sigsegv; @@ -398,7 +398,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, __frame->gr9 = (unsigned long) &frame->info; if (get_personality & FDPIC_FUNCPTRS) { - struct fdpic_func_descriptor *funcptr = + struct fdpic_func_descriptor __user *funcptr = (struct fdpic_func_descriptor __user *) ka->sa.sa_handler; __get_user(__frame->pc, &funcptr->text); __get_user(__frame->gr15, &funcptr->GOT); diff --git a/trunk/arch/frv/kernel/sys_frv.c b/trunk/arch/frv/kernel/sys_frv.c index 931aa6d895e3..c4d4348c9e8e 100644 --- a/trunk/arch/frv/kernel/sys_frv.c +++ b/trunk/arch/frv/kernel/sys_frv.c @@ -32,7 +32,7 @@ * sys_pipe() is the normal C calling standard for creating * a pipe. It's not the way unix traditionally does this, though. */ -asmlinkage long sys_pipe(unsigned long * fildes) +asmlinkage long sys_pipe(unsigned long __user * fildes) { int fd[2]; int error; diff --git a/trunk/arch/frv/kernel/sysctl.c b/trunk/arch/frv/kernel/sysctl.c index 408b0f382b42..b908863d6593 100644 --- a/trunk/arch/frv/kernel/sysctl.c +++ b/trunk/arch/frv/kernel/sysctl.c @@ -49,7 +49,7 @@ static void frv_change_dcache_mode(unsigned long newmode) * handle requests to dynamically switch the write caching mode delivered by /proc */ static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp, - void *buffer, size_t *lenp, loff_t *ppos) + void __user *buffer, size_t *lenp, loff_t *ppos) { unsigned long hsr0; char buff[8]; @@ -123,7 +123,7 @@ static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp, */ #ifdef CONFIG_MMU static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp, - void *buffer, size_t *lenp, loff_t *ppos) + void __user *buffer, size_t *lenp, loff_t *ppos) { pid_t pid; char buff[16], *p; diff --git a/trunk/arch/frv/kernel/uaccess.c b/trunk/arch/frv/kernel/uaccess.c index 9b751c0f0e84..9fb771a20df3 100644 --- a/trunk/arch/frv/kernel/uaccess.c +++ b/trunk/arch/frv/kernel/uaccess.c @@ -17,7 +17,7 @@ /* * copy a null terminated string from userspace */ -long strncpy_from_user(char *dst, const char *src, long count) +long strncpy_from_user(char *dst, const char __user *src, long count) { unsigned long max; char *p, ch; @@ -70,9 +70,9 @@ EXPORT_SYMBOL(strncpy_from_user); * * Return 0 on exception, a value greater than N if too long */ -long strnlen_user(const char *src, long count) +long strnlen_user(const char __user *src, long count) { - const char *p; + const char __user *p; long err = 0; char ch; diff --git a/trunk/arch/frv/mb93090-mb00/pci-irq.c b/trunk/arch/frv/mb93090-mb00/pci-irq.c index c4a1144c98b0..45ae39d84b69 100644 --- a/trunk/arch/frv/mb93090-mb00/pci-irq.c +++ b/trunk/arch/frv/mb93090-mb00/pci-irq.c @@ -32,11 +32,11 @@ */ static const uint8_t __initdata pci_bus0_irq_routing[32][4] = { - [0 ] { IRQ_FPGA_MB86943_PCI_INTA }, - [16] { IRQ_FPGA_RTL8029_INTA }, - [17] { IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB }, - [18] { IRQ_FPGA_PCI_INTB, IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA }, - [19] { IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB, IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD }, + [0 ] = { IRQ_FPGA_MB86943_PCI_INTA }, + [16] = { IRQ_FPGA_RTL8029_INTA }, + [17] = { IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB }, + [18] = { IRQ_FPGA_PCI_INTB, IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA }, + [19] = { IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB, IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD }, }; void __init pcibios_irq_init(void) diff --git a/trunk/arch/frv/mm/kmap.c b/trunk/arch/frv/mm/kmap.c index c54f18e65ea6..40b62c5c2951 100644 --- a/trunk/arch/frv/mm/kmap.c +++ b/trunk/arch/frv/mm/kmap.c @@ -31,15 +31,15 @@ * Map some physical address range into the kernel address space. */ -void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) +void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) { - return (void *)physaddr; + return (void __iomem *)physaddr; } /* * Unmap a ioremap()ed region again */ -void iounmap(void *addr) +void iounmap(void volatile __iomem *addr) { } diff --git a/trunk/arch/h8300/kernel/signal.c b/trunk/arch/h8300/kernel/signal.c index f13d5e82d4b9..7787f70a05bb 100644 --- a/trunk/arch/h8300/kernel/signal.c +++ b/trunk/arch/h8300/kernel/signal.c @@ -307,7 +307,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) /* This is the X/Open sanctioned signal stack switching. */ if (ka->sa.sa_flags & SA_ONSTACK) { - if (!on_sig_stack(usp)) + if (!sas_ss_flags(usp)) usp = current->sas_ss_sp + current->sas_ss_size; } return (void *)((usp - frame_size) & -8UL); diff --git a/trunk/arch/i386/Kconfig b/trunk/arch/i386/Kconfig index 8dfa3054f10f..1596101cfaf8 100644 --- a/trunk/arch/i386/Kconfig +++ b/trunk/arch/i386/Kconfig @@ -173,6 +173,12 @@ config ACPI_SRAT bool default y depends on NUMA && (X86_SUMMIT || X86_GENERICARCH) + select ACPI_NUMA + +config HAVE_ARCH_PARSE_SRAT + bool + default y + depends on ACPI_SRAT config X86_SUMMIT_NUMA bool @@ -224,7 +230,6 @@ config NR_CPUS config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" depends on SMP - default off help SMT scheduler support improves the CPU scheduler's decision making when dealing with Intel Pentium 4 chips with HyperThreading at a diff --git a/trunk/arch/i386/kernel/acpi/boot.c b/trunk/arch/i386/kernel/acpi/boot.c index fbe93084244c..97ca17189af5 100644 --- a/trunk/arch/i386/kernel/acpi/boot.c +++ b/trunk/arch/i386/kernel/acpi/boot.c @@ -217,7 +217,7 @@ static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size) { struct acpi_table_madt *madt = NULL; - if (!phys_addr || !size) + if (!phys_addr || !size || !cpu_has_apic) return -EINVAL; madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size); @@ -623,9 +623,9 @@ extern u32 pmtmr_ioport; static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) { - struct fadt_descriptor_rev2 *fadt = NULL; + struct fadt_descriptor *fadt = NULL; - fadt = (struct fadt_descriptor_rev2 *)__acpi_map_table(phys, size); + fadt = (struct fadt_descriptor *)__acpi_map_table(phys, size); if (!fadt) { printk(KERN_WARNING PREFIX "Unable to map FADT\n"); return 0; @@ -756,7 +756,7 @@ static int __init acpi_parse_madt_ioapic_entries(void) return -ENODEV; } - if (!cpu_has_apic) + if (!cpu_has_apic) return -ENODEV; /* diff --git a/trunk/arch/i386/kernel/acpi/processor.c b/trunk/arch/i386/kernel/acpi/processor.c index 9f4cc02717ec..b54fded49834 100644 --- a/trunk/arch/i386/kernel/acpi/processor.c +++ b/trunk/arch/i386/kernel/acpi/processor.c @@ -47,7 +47,7 @@ static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c) buf[2] = ACPI_PDC_C_CAPABILITY_SMP; if (cpu_has(c, X86_FEATURE_EST)) - buf[2] |= ACPI_PDC_EST_CAPABILITY_SMP; + buf[2] |= ACPI_PDC_EST_CAPABILITY_SWSMP; obj->type = ACPI_TYPE_BUFFER; obj->buffer.length = 12; diff --git a/trunk/arch/i386/kernel/acpi/sleep.c b/trunk/arch/i386/kernel/acpi/sleep.c index 1cb2b186a3af..4ee83577bf61 100644 --- a/trunk/arch/i386/kernel/acpi/sleep.c +++ b/trunk/arch/i386/kernel/acpi/sleep.c @@ -8,30 +8,17 @@ #include #include #include +#include + #include -#include /* address in low memory of the wakeup routine. */ unsigned long acpi_wakeup_address = 0; unsigned long acpi_video_flags; extern char wakeup_start, wakeup_end; -extern void zap_low_mappings(void); - extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long)); -static void init_low_mapping(pgd_t * pgd, int pgd_limit) -{ - int pgd_ofs = 0; - - while ((pgd_ofs < pgd_limit) - && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) { - set_pgd(pgd, *(pgd + USER_PTRS_PER_PGD)); - pgd_ofs++, pgd++; - } - flush_tlb_all(); -} - /** * acpi_save_state_mem - save kernel state * @@ -42,7 +29,6 @@ int acpi_save_state_mem(void) { if (!acpi_wakeup_address) return 1; - init_low_mapping(swapper_pg_dir, USER_PTRS_PER_PGD); memcpy((void *)acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start); acpi_copy_wakeup_routine(acpi_wakeup_address); @@ -55,7 +41,6 @@ int acpi_save_state_mem(void) */ void acpi_restore_state_mem(void) { - zap_low_mappings(); } /** diff --git a/trunk/arch/i386/kernel/acpi/wakeup.S b/trunk/arch/i386/kernel/acpi/wakeup.S index 7c74fe0dc93c..9f408eee4e6f 100644 --- a/trunk/arch/i386/kernel/acpi/wakeup.S +++ b/trunk/arch/i386/kernel/acpi/wakeup.S @@ -56,7 +56,7 @@ wakeup_code: 1: # set up page table - movl $swapper_pg_dir-__PAGE_OFFSET, %eax + movl $swsusp_pg_dir-__PAGE_OFFSET, %eax movl %eax, %cr3 testl $1, real_efer_save_restore - wakeup_code @@ -265,11 +265,6 @@ ENTRY(acpi_copy_wakeup_routine) movl $0x12345678, saved_magic ret -.data -ALIGN -ENTRY(saved_magic) .long 0 -ENTRY(saved_eip) .long 0 - save_registers: leal 4(%esp), %eax movl %eax, saved_context_esp @@ -304,7 +299,11 @@ ret_point: call restore_processor_state ret +.data ALIGN +ENTRY(saved_magic) .long 0 +ENTRY(saved_eip) .long 0 + # saved registers saved_gdt: .long 0,0 saved_idt: .long 0,0 diff --git a/trunk/arch/i386/kernel/apic.c b/trunk/arch/i386/kernel/apic.c index 3d4b2f3d116a..5ab59c12335b 100644 --- a/trunk/arch/i386/kernel/apic.c +++ b/trunk/arch/i386/kernel/apic.c @@ -62,7 +62,7 @@ int apic_verbosity; static void apic_pm_activate(void); -int modern_apic(void) +static int modern_apic(void) { unsigned int lvr, version; /* AMD systems use old APIC versions, so check the CPU */ @@ -113,7 +113,7 @@ void __init apic_intr_init(void) } /* Using APIC to generate smp_local_timer_interrupt? */ -int using_apic_timer = 0; +int using_apic_timer __read_mostly = 0; static int enabled_via_apicbase; diff --git a/trunk/arch/i386/kernel/apm.c b/trunk/arch/i386/kernel/apm.c index df0e1745f189..9e819eb68229 100644 --- a/trunk/arch/i386/kernel/apm.c +++ b/trunk/arch/i386/kernel/apm.c @@ -374,14 +374,14 @@ static struct { unsigned short segment; } apm_bios_entry; static int clock_slowed; -static int idle_threshold = DEFAULT_IDLE_THRESHOLD; -static int idle_period = DEFAULT_IDLE_PERIOD; +static int idle_threshold __read_mostly = DEFAULT_IDLE_THRESHOLD; +static int idle_period __read_mostly = DEFAULT_IDLE_PERIOD; static int set_pm_idle; static int suspends_pending; static int standbys_pending; static int ignore_sys_suspend; static int ignore_normal_resume; -static int bounce_interval = DEFAULT_BOUNCE_INTERVAL; +static int bounce_interval __read_mostly = DEFAULT_BOUNCE_INTERVAL; #ifdef CONFIG_APM_RTC_IS_GMT # define clock_cmos_diff 0 @@ -390,8 +390,8 @@ static int bounce_interval = DEFAULT_BOUNCE_INTERVAL; static long clock_cmos_diff; static int got_clock_diff; #endif -static int debug; -static int smp; +static int debug __read_mostly; +static int smp __read_mostly; static int apm_disabled = -1; #ifdef CONFIG_SMP static int power_off; @@ -403,8 +403,8 @@ static int realmode_power_off = 1; #else static int realmode_power_off; #endif -static int exit_kapmd; -static int kapmd_running; +static int exit_kapmd __read_mostly; +static int kapmd_running __read_mostly; #ifdef CONFIG_APM_ALLOW_INTS static int allow_ints = 1; #else @@ -416,15 +416,15 @@ static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); static struct apm_user * user_list; static DEFINE_SPINLOCK(user_list_lock); -static struct desc_struct bad_bios_desc = { 0, 0x00409200 }; +static const struct desc_struct bad_bios_desc = { 0, 0x00409200 }; -static char driver_version[] = "1.16ac"; /* no spaces */ +static const char driver_version[] = "1.16ac"; /* no spaces */ /* * APM event names taken from the APM 1.2 specification. These are * the message codes that the BIOS uses to tell us about events */ -static char * apm_event_name[] = { +static const char * const apm_event_name[] = { "system standby", "system suspend", "normal resume", @@ -616,7 +616,7 @@ static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in, * @ecx_in: ECX register value for BIOS call * @eax: EAX register on return from the BIOS call * - * Make a BIOS call that does only returns one value, or just status. + * Make a BIOS call that returns one value only, or just status. * If there is an error, then the error code is returned in AH * (bits 8-15 of eax) and this function returns non-zero. This is * used for simpler BIOS operations. This call may hold interrupts @@ -822,7 +822,7 @@ static void apm_do_busy(void) #define IDLE_CALC_LIMIT (HZ * 100) #define IDLE_LEAKY_MAX 16 -static void (*original_pm_idle)(void); +static void (*original_pm_idle)(void) __read_mostly; /** * apm_cpu_idle - cpu idling for APM capable Linux @@ -1063,7 +1063,8 @@ static int apm_engage_power_management(u_short device, int enable) static int apm_console_blank(int blank) { - int error, i; + int error = APM_NOT_ENGAGED; /* silence gcc */ + int i; u_short state; static const u_short dev[3] = { 0x100, 0x1FF, 0x101 }; @@ -1104,7 +1105,8 @@ static int queue_empty(struct apm_user *as) static apm_event_t get_queued_event(struct apm_user *as) { - as->event_tail = (as->event_tail + 1) % APM_MAX_EVENTS; + if (++as->event_tail >= APM_MAX_EVENTS) + as->event_tail = 0; return as->events[as->event_tail]; } @@ -1118,13 +1120,16 @@ static void queue_event(apm_event_t event, struct apm_user *sender) for (as = user_list; as != NULL; as = as->next) { if ((as == sender) || (!as->reader)) continue; - as->event_head = (as->event_head + 1) % APM_MAX_EVENTS; + if (++as->event_head >= APM_MAX_EVENTS) + as->event_head = 0; + if (as->event_head == as->event_tail) { static int notified; if (notified++ == 0) printk(KERN_ERR "apm: an event queue overflowed\n"); - as->event_tail = (as->event_tail + 1) % APM_MAX_EVENTS; + if (++as->event_tail >= APM_MAX_EVENTS) + as->event_tail = 0; } as->events[as->event_head] = event; if ((!as->suser) || (!as->writer)) @@ -1282,7 +1287,7 @@ static void standby(void) static apm_event_t get_event(void) { int error; - apm_event_t event; + apm_event_t event = APM_NO_EVENTS; /* silence gcc */ apm_eventinfo_t info; static int notified; diff --git a/trunk/arch/i386/kernel/cpu/common.c b/trunk/arch/i386/kernel/cpu/common.c index a06a49075f10..44f2c5f2dda1 100644 --- a/trunk/arch/i386/kernel/cpu/common.c +++ b/trunk/arch/i386/kernel/cpu/common.c @@ -11,6 +11,8 @@ #include #include #include +#include +#include #ifdef CONFIG_X86_LOCAL_APIC #include #include diff --git a/trunk/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/trunk/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index 1a7bdcef1926..05668e3598c0 100644 --- a/trunk/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/trunk/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -48,12 +48,13 @@ MODULE_LICENSE("GPL"); struct cpufreq_acpi_io { - struct acpi_processor_performance acpi_data; + struct acpi_processor_performance *acpi_data; struct cpufreq_frequency_table *freq_table; unsigned int resume; }; static struct cpufreq_acpi_io *acpi_io_data[NR_CPUS]; +static struct acpi_processor_performance *acpi_perf_data[NR_CPUS]; static struct cpufreq_driver acpi_cpufreq_driver; @@ -104,64 +105,43 @@ acpi_processor_set_performance ( { u16 port = 0; u8 bit_width = 0; - int ret; - u32 value = 0; int i = 0; - struct cpufreq_freqs cpufreq_freqs; - cpumask_t saved_mask; + int ret = 0; + u32 value = 0; int retval; + struct acpi_processor_performance *perf; dprintk("acpi_processor_set_performance\n"); - /* - * TBD: Use something other than set_cpus_allowed. - * As set_cpus_allowed is a bit racy, - * with any other set_cpus_allowed for this process. - */ - saved_mask = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - if (smp_processor_id() != cpu) { - return (-EAGAIN); - } - - if (state == data->acpi_data.state) { + retval = 0; + perf = data->acpi_data; + if (state == perf->state) { if (unlikely(data->resume)) { dprintk("Called after resume, resetting to P%d\n", state); data->resume = 0; } else { dprintk("Already at target state (P%d)\n", state); - retval = 0; - goto migrate_end; + return (retval); } } - dprintk("Transitioning from P%d to P%d\n", - data->acpi_data.state, state); - - /* cpufreq frequency struct */ - cpufreq_freqs.cpu = cpu; - cpufreq_freqs.old = data->freq_table[data->acpi_data.state].frequency; - cpufreq_freqs.new = data->freq_table[state].frequency; - - /* notify cpufreq */ - cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE); + dprintk("Transitioning from P%d to P%d\n", perf->state, state); /* * First we write the target state's 'control' value to the * control_register. */ - port = data->acpi_data.control_register.address; - bit_width = data->acpi_data.control_register.bit_width; - value = (u32) data->acpi_data.states[state].control; + port = perf->control_register.address; + bit_width = perf->control_register.bit_width; + value = (u32) perf->states[state].control; dprintk("Writing 0x%08x to port 0x%04x\n", value, port); ret = acpi_processor_write_port(port, bit_width, value); if (ret) { dprintk("Invalid port width 0x%04x\n", bit_width); - retval = ret; - goto migrate_end; + return (ret); } /* @@ -177,48 +157,35 @@ acpi_processor_set_performance ( * before giving up. */ - port = data->acpi_data.status_register.address; - bit_width = data->acpi_data.status_register.bit_width; + port = perf->status_register.address; + bit_width = perf->status_register.bit_width; dprintk("Looking for 0x%08x from port 0x%04x\n", - (u32) data->acpi_data.states[state].status, port); + (u32) perf->states[state].status, port); - for (i=0; i<100; i++) { + for (i = 0; i < 100; i++) { ret = acpi_processor_read_port(port, bit_width, &value); if (ret) { dprintk("Invalid port width 0x%04x\n", bit_width); - retval = ret; - goto migrate_end; + return (ret); } - if (value == (u32) data->acpi_data.states[state].status) + if (value == (u32) perf->states[state].status) break; udelay(10); } } else { - value = (u32) data->acpi_data.states[state].status; + value = (u32) perf->states[state].status; } - /* notify cpufreq */ - cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE); - - if (unlikely(value != (u32) data->acpi_data.states[state].status)) { - unsigned int tmp = cpufreq_freqs.new; - cpufreq_freqs.new = cpufreq_freqs.old; - cpufreq_freqs.old = tmp; - cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE); - cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE); + if (unlikely(value != (u32) perf->states[state].status)) { printk(KERN_WARNING "acpi-cpufreq: Transition failed\n"); retval = -ENODEV; - goto migrate_end; + return (retval); } dprintk("Transition successful after %d microseconds\n", i * 10); - data->acpi_data.state = state; - - retval = 0; -migrate_end: - set_cpus_allowed(current, saved_mask); + perf->state = state; return (retval); } @@ -230,8 +197,17 @@ acpi_cpufreq_target ( unsigned int relation) { struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; + struct acpi_processor_performance *perf; + struct cpufreq_freqs freqs; + cpumask_t online_policy_cpus; + cpumask_t saved_mask; + cpumask_t set_mask; + cpumask_t covered_cpus; + unsigned int cur_state = 0; unsigned int next_state = 0; unsigned int result = 0; + unsigned int j; + unsigned int tmp; dprintk("acpi_cpufreq_setpolicy\n"); @@ -240,11 +216,95 @@ acpi_cpufreq_target ( target_freq, relation, &next_state); - if (result) + if (unlikely(result)) return (result); - result = acpi_processor_set_performance (data, policy->cpu, next_state); + perf = data->acpi_data; + cur_state = perf->state; + freqs.old = data->freq_table[cur_state].frequency; + freqs.new = data->freq_table[next_state].frequency; + +#ifdef CONFIG_HOTPLUG_CPU + /* cpufreq holds the hotplug lock, so we are safe from here on */ + cpus_and(online_policy_cpus, cpu_online_map, policy->cpus); +#else + online_policy_cpus = policy->cpus; +#endif + + for_each_cpu_mask(j, online_policy_cpus) { + freqs.cpu = j; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + } + + /* + * We need to call driver->target() on all or any CPU in + * policy->cpus, depending on policy->shared_type. + */ + saved_mask = current->cpus_allowed; + cpus_clear(covered_cpus); + for_each_cpu_mask(j, online_policy_cpus) { + /* + * Support for SMP systems. + * Make sure we are running on CPU that wants to change freq + */ + cpus_clear(set_mask); + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) + cpus_or(set_mask, set_mask, online_policy_cpus); + else + cpu_set(j, set_mask); + + set_cpus_allowed(current, set_mask); + if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) { + dprintk("couldn't limit to CPUs in this domain\n"); + result = -EAGAIN; + break; + } + + result = acpi_processor_set_performance (data, j, next_state); + if (result) { + result = -EAGAIN; + break; + } + + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) + break; + + cpu_set(j, covered_cpus); + } + + for_each_cpu_mask(j, online_policy_cpus) { + freqs.cpu = j; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } + if (unlikely(result)) { + /* + * We have failed halfway through the frequency change. + * We have sent callbacks to online_policy_cpus and + * acpi_processor_set_performance() has been called on + * coverd_cpus. Best effort undo.. + */ + + if (!cpus_empty(covered_cpus)) { + for_each_cpu_mask(j, covered_cpus) { + policy->cpu = j; + acpi_processor_set_performance (data, + j, + cur_state); + } + } + + tmp = freqs.new; + freqs.new = freqs.old; + freqs.old = tmp; + for_each_cpu_mask(j, online_policy_cpus) { + freqs.cpu = j; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } + } + + set_cpus_allowed(current, saved_mask); return (result); } @@ -270,30 +330,65 @@ acpi_cpufreq_guess_freq ( struct cpufreq_acpi_io *data, unsigned int cpu) { + struct acpi_processor_performance *perf = data->acpi_data; + if (cpu_khz) { /* search the closest match to cpu_khz */ unsigned int i; unsigned long freq; - unsigned long freqn = data->acpi_data.states[0].core_frequency * 1000; + unsigned long freqn = perf->states[0].core_frequency * 1000; - for (i=0; i < (data->acpi_data.state_count - 1); i++) { + for (i = 0; i < (perf->state_count - 1); i++) { freq = freqn; - freqn = data->acpi_data.states[i+1].core_frequency * 1000; + freqn = perf->states[i+1].core_frequency * 1000; if ((2 * cpu_khz) > (freqn + freq)) { - data->acpi_data.state = i; + perf->state = i; return (freq); } } - data->acpi_data.state = data->acpi_data.state_count - 1; + perf->state = perf->state_count - 1; return (freqn); - } else + } else { /* assume CPU is at P0... */ - data->acpi_data.state = 0; - return data->acpi_data.states[0].core_frequency * 1000; - + perf->state = 0; + return perf->states[0].core_frequency * 1000; + } } +/* + * acpi_cpufreq_early_init - initialize ACPI P-States library + * + * Initialize the ACPI P-States library (drivers/acpi/processor_perflib.c) + * in order to determine correct frequency and voltage pairings. We can + * do _PDC and _PSD and find out the processor dependency for the + * actual init that will happen later... + */ +static int acpi_cpufreq_early_init_acpi(void) +{ + struct acpi_processor_performance *data; + unsigned int i, j; + + dprintk("acpi_cpufreq_early_init\n"); + + for_each_cpu(i) { + data = kzalloc(sizeof(struct acpi_processor_performance), + GFP_KERNEL); + if (!data) { + for_each_cpu(j) { + kfree(acpi_perf_data[j]); + acpi_perf_data[j] = NULL; + } + return (-ENOMEM); + } + acpi_perf_data[i] = data; + } + + /* Do initialization in ACPI core */ + acpi_processor_preregister_performance(acpi_perf_data); + return 0; +} + static int acpi_cpufreq_cpu_init ( struct cpufreq_policy *policy) @@ -303,41 +398,51 @@ acpi_cpufreq_cpu_init ( struct cpufreq_acpi_io *data; unsigned int result = 0; struct cpuinfo_x86 *c = &cpu_data[policy->cpu]; + struct acpi_processor_performance *perf; dprintk("acpi_cpufreq_cpu_init\n"); + if (!acpi_perf_data[cpu]) + return (-ENODEV); + data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL); if (!data) return (-ENOMEM); + data->acpi_data = acpi_perf_data[cpu]; acpi_io_data[cpu] = data; - result = acpi_processor_register_performance(&data->acpi_data, cpu); + result = acpi_processor_register_performance(data->acpi_data, cpu); if (result) goto err_free; + perf = data->acpi_data; + policy->cpus = perf->shared_cpu_map; + policy->shared_type = perf->shared_type; + if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) { acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS; } /* capability check */ - if (data->acpi_data.state_count <= 1) { + if (perf->state_count <= 1) { dprintk("No P-States\n"); result = -ENODEV; goto err_unreg; } - if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO) || - (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { + + if ((perf->control_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO) || + (perf->status_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { dprintk("Unsupported address space [%d, %d]\n", - (u32) (data->acpi_data.control_register.space_id), - (u32) (data->acpi_data.status_register.space_id)); + (u32) (perf->control_register.space_id), + (u32) (perf->status_register.space_id)); result = -ENODEV; goto err_unreg; } /* alloc freq_table */ - data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * (data->acpi_data.state_count + 1), GFP_KERNEL); + data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * (perf->state_count + 1), GFP_KERNEL); if (!data->freq_table) { result = -ENOMEM; goto err_unreg; @@ -345,9 +450,9 @@ acpi_cpufreq_cpu_init ( /* detect transition latency */ policy->cpuinfo.transition_latency = 0; - for (i=0; iacpi_data.state_count; i++) { - if ((data->acpi_data.states[i].transition_latency * 1000) > policy->cpuinfo.transition_latency) - policy->cpuinfo.transition_latency = data->acpi_data.states[i].transition_latency * 1000; + for (i=0; istate_count; i++) { + if ((perf->states[i].transition_latency * 1000) > policy->cpuinfo.transition_latency) + policy->cpuinfo.transition_latency = perf->states[i].transition_latency * 1000; } policy->governor = CPUFREQ_DEFAULT_GOVERNOR; @@ -355,11 +460,11 @@ acpi_cpufreq_cpu_init ( policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu); /* table init */ - for (i=0; i<=data->acpi_data.state_count; i++) + for (i=0; i<=perf->state_count; i++) { data->freq_table[i].index = i; - if (iacpi_data.state_count) - data->freq_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000; + if (istate_count) + data->freq_table[i].frequency = perf->states[i].core_frequency * 1000; else data->freq_table[i].frequency = CPUFREQ_TABLE_END; } @@ -374,12 +479,12 @@ acpi_cpufreq_cpu_init ( printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management activated.\n", cpu); - for (i = 0; i < data->acpi_data.state_count; i++) + for (i = 0; i < perf->state_count; i++) dprintk(" %cP%d: %d MHz, %d mW, %d uS\n", - (i == data->acpi_data.state?'*':' '), i, - (u32) data->acpi_data.states[i].core_frequency, - (u32) data->acpi_data.states[i].power, - (u32) data->acpi_data.states[i].transition_latency); + (i == perf->state?'*':' '), i, + (u32) perf->states[i].core_frequency, + (u32) perf->states[i].power, + (u32) perf->states[i].transition_latency); cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu); @@ -394,7 +499,7 @@ acpi_cpufreq_cpu_init ( err_freqfree: kfree(data->freq_table); err_unreg: - acpi_processor_unregister_performance(&data->acpi_data, cpu); + acpi_processor_unregister_performance(perf, cpu); err_free: kfree(data); acpi_io_data[cpu] = NULL; @@ -415,7 +520,7 @@ acpi_cpufreq_cpu_exit ( if (data) { cpufreq_frequency_table_put_attr(policy->cpu); acpi_io_data[policy->cpu] = NULL; - acpi_processor_unregister_performance(&data->acpi_data, policy->cpu); + acpi_processor_unregister_performance(data->acpi_data, policy->cpu); kfree(data); } @@ -462,7 +567,10 @@ acpi_cpufreq_init (void) dprintk("acpi_cpufreq_init\n"); - result = cpufreq_register_driver(&acpi_cpufreq_driver); + result = acpi_cpufreq_early_init_acpi(); + + if (!result) + result = cpufreq_register_driver(&acpi_cpufreq_driver); return (result); } @@ -471,10 +579,15 @@ acpi_cpufreq_init (void) static void __exit acpi_cpufreq_exit (void) { + unsigned int i; dprintk("acpi_cpufreq_exit\n"); cpufreq_unregister_driver(&acpi_cpufreq_driver); + for_each_cpu(i) { + kfree(acpi_perf_data[i]); + acpi_perf_data[i] = NULL; + } return; } diff --git a/trunk/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/trunk/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index b4277f58f40c..2d6491672559 100644 --- a/trunk/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/trunk/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -120,7 +120,7 @@ static int pending_bit_stuck(void) { u32 lo, hi; - if (cpu_family) + if (cpu_family == CPU_HW_PSTATE) return 0; rdmsr(MSR_FIDVID_STATUS, lo, hi); @@ -136,7 +136,7 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data) u32 lo, hi; u32 i = 0; - if (cpu_family) { + if (cpu_family == CPU_HW_PSTATE) { rdmsr(MSR_PSTATE_STATUS, lo, hi); i = lo & HW_PSTATE_MASK; rdmsr(MSR_PSTATE_DEF_BASE + i, lo, hi); @@ -598,7 +598,7 @@ static void print_basics(struct powernow_k8_data *data) int j; for (j = 0; j < data->numps; j++) { if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID) { - if (cpu_family) { + if (cpu_family == CPU_HW_PSTATE) { printk(KERN_INFO PFX " %d : fid 0x%x gid 0x%x (%d MHz)\n", j, (data->powernow_table[j].index & 0xff00) >> 8, (data->powernow_table[j].index & 0xff0000) >> 16, data->powernow_table[j].frequency/1000); @@ -758,7 +758,7 @@ static int find_psb_table(struct powernow_k8_data *data) #ifdef CONFIG_X86_POWERNOW_K8_ACPI static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { - if (!data->acpi_data.state_count || cpu_family) + if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE)) return; data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK; @@ -801,7 +801,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) goto err_out; } - if (cpu_family) + if (cpu_family == CPU_HW_PSTATE) ret_val = fill_powernow_table_pstate(data, powernow_table); else ret_val = fill_powernow_table_fidvid(data, powernow_table); @@ -885,8 +885,8 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpuf u32 vid; if (data->exttype) { - fid = data->acpi_data.states[i].status & FID_MASK; - vid = (data->acpi_data.states[i].status >> VID_SHIFT) & VID_MASK; + fid = data->acpi_data.states[i].status & EXT_FID_MASK; + vid = (data->acpi_data.states[i].status >> VID_SHIFT) & EXT_VID_MASK; } else { fid = data->acpi_data.states[i].control & FID_MASK; vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK; @@ -1082,7 +1082,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi if (query_current_values_with_pending_wait(data)) goto err_out; - if (cpu_family) + if (cpu_family == CPU_HW_PSTATE) dprintk("targ: curr fid 0x%x, did 0x%x\n", data->currfid, data->currvid); else { @@ -1103,7 +1103,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi powernow_k8_acpi_pst_values(data, newstate); - if (cpu_family) + if (cpu_family == CPU_HW_PSTATE) ret = transition_frequency_pstate(data, newstate); else ret = transition_frequency_fidvid(data, newstate); @@ -1115,7 +1115,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi } mutex_unlock(&fidvid_mutex); - if (cpu_family) + if (cpu_family == CPU_HW_PSTATE) pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid); else pol->cur = find_khz_freq_from_fid(data->currfid); @@ -1163,7 +1163,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) * Use the PSB BIOS structure. This is only availabe on * an UP version, and is deprecated by AMD. */ - if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) { + if (num_online_cpus() != 1) { printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n"); kfree(data); return -ENODEV; @@ -1197,14 +1197,14 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) if (query_current_values_with_pending_wait(data)) goto err_out; - if (!cpu_family) + if (cpu_family == CPU_OPTERON) fidvid_msr_init(); /* run on any CPU again */ set_cpus_allowed(current, oldmask); pol->governor = CPUFREQ_DEFAULT_GOVERNOR; - if (cpu_family) + if (cpu_family == CPU_HW_PSTATE) pol->cpus = cpumask_of_cpu(pol->cpu); else pol->cpus = cpu_core_map[pol->cpu]; @@ -1215,7 +1215,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US) + (3 * (1 << data->irt) * 10)) * 1000; - if (cpu_family) + if (cpu_family == CPU_HW_PSTATE) pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid); else pol->cur = find_khz_freq_from_fid(data->currfid); @@ -1232,7 +1232,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu); - if (cpu_family) + if (cpu_family == CPU_HW_PSTATE) dprintk("cpu_init done, current fid 0x%x, did 0x%x\n", data->currfid, data->currdid); else diff --git a/trunk/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/trunk/arch/i386/kernel/cpu/cpufreq/powernow-k8.h index bf8ad9e43da3..0fb2a3001ba5 100644 --- a/trunk/arch/i386/kernel/cpu/cpufreq/powernow-k8.h +++ b/trunk/arch/i386/kernel/cpu/cpufreq/powernow-k8.h @@ -169,7 +169,9 @@ struct powernow_k8_data { #define MVS_MASK 3 #define VST_MASK 0x7f #define VID_MASK 0x1f -#define FID_MASK 0x3f +#define FID_MASK 0x1f +#define EXT_VID_MASK 0x3f +#define EXT_FID_MASK 0x3f /* diff --git a/trunk/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/trunk/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index ce54ff12c15d..31c3a5baaa7f 100644 --- a/trunk/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/trunk/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -2,19 +2,15 @@ * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium * M (part of the Centrino chipset). * + * Since the original Pentium M, most new Intel CPUs support Enhanced + * SpeedStep. + * * Despite the "SpeedStep" in the name, this is almost entirely unlike * traditional SpeedStep. * * Modelled on speedstep.c * * Copyright (C) 2003 Jeremy Fitzhardinge - * - * WARNING WARNING WARNING - * - * This driver manipulates the PERF_CTL MSR, which is only somewhat - * documented. While it seems to work on my laptop, it has not been - * tested anywhere else, and it may not work for you, do strange - * things or simply crash. */ #include @@ -36,7 +32,7 @@ #include #define PFX "speedstep-centrino: " -#define MAINTAINER "Jeremy Fitzhardinge " +#define MAINTAINER "cpufreq@lists.linux.org.uk" #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg) @@ -351,7 +347,36 @@ static unsigned int get_cur_freq(unsigned int cpu) #ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI -static struct acpi_processor_performance p; +static struct acpi_processor_performance *acpi_perf_data[NR_CPUS]; + +/* + * centrino_cpu_early_init_acpi - Do the preregistering with ACPI P-States + * library + * + * Before doing the actual init, we need to do _PSD related setup whenever + * supported by the BIOS. These are handled by this early_init routine. + */ +static int centrino_cpu_early_init_acpi(void) +{ + unsigned int i, j; + struct acpi_processor_performance *data; + + for_each_cpu(i) { + data = kzalloc(sizeof(struct acpi_processor_performance), + GFP_KERNEL); + if (!data) { + for_each_cpu(j) { + kfree(acpi_perf_data[j]); + acpi_perf_data[j] = NULL; + } + return (-ENOMEM); + } + acpi_perf_data[i] = data; + } + + acpi_processor_preregister_performance(acpi_perf_data); + return 0; +} /* * centrino_cpu_init_acpi - register with ACPI P-States library @@ -365,46 +390,51 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) unsigned long cur_freq; int result = 0, i; unsigned int cpu = policy->cpu; + struct acpi_processor_performance *p; + + p = acpi_perf_data[cpu]; /* register with ACPI core */ - if (acpi_processor_register_performance(&p, cpu)) { - dprintk("obtaining ACPI data failed\n"); + if (acpi_processor_register_performance(p, cpu)) { + dprintk(PFX "obtaining ACPI data failed\n"); return -EIO; } + policy->cpus = p->shared_cpu_map; + policy->shared_type = p->shared_type; /* verify the acpi_data */ - if (p.state_count <= 1) { + if (p->state_count <= 1) { dprintk("No P-States\n"); result = -ENODEV; goto err_unreg; } - if ((p.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || - (p.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { + if ((p->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || + (p->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { dprintk("Invalid control/status registers (%x - %x)\n", - p.control_register.space_id, p.status_register.space_id); + p->control_register.space_id, p->status_register.space_id); result = -EIO; goto err_unreg; } - for (i=0; istate_count; i++) { + if (p->states[i].control != p->states[i].status) { dprintk("Different control (%llu) and status values (%llu)\n", - p.states[i].control, p.states[i].status); + p->states[i].control, p->states[i].status); result = -EINVAL; goto err_unreg; } - if (!p.states[i].core_frequency) { + if (!p->states[i].core_frequency) { dprintk("Zero core frequency for state %u\n", i); result = -EINVAL; goto err_unreg; } - if (p.states[i].core_frequency > p.states[0].core_frequency) { + if (p->states[i].core_frequency > p->states[0].core_frequency) { dprintk("P%u has larger frequency (%llu) than P0 (%llu), skipping\n", i, - p.states[i].core_frequency, p.states[0].core_frequency); - p.states[i].core_frequency = 0; + p->states[i].core_frequency, p->states[0].core_frequency); + p->states[i].core_frequency = 0; continue; } } @@ -416,26 +446,26 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) } centrino_model[cpu]->model_name=NULL; - centrino_model[cpu]->max_freq = p.states[0].core_frequency * 1000; + centrino_model[cpu]->max_freq = p->states[0].core_frequency * 1000; centrino_model[cpu]->op_points = kmalloc(sizeof(struct cpufreq_frequency_table) * - (p.state_count + 1), GFP_KERNEL); + (p->state_count + 1), GFP_KERNEL); if (!centrino_model[cpu]->op_points) { result = -ENOMEM; goto err_kfree; } - for (i=0; iop_points[i].index = p.states[i].control; - centrino_model[cpu]->op_points[i].frequency = p.states[i].core_frequency * 1000; + for (i=0; istate_count; i++) { + centrino_model[cpu]->op_points[i].index = p->states[i].control; + centrino_model[cpu]->op_points[i].frequency = p->states[i].core_frequency * 1000; dprintk("adding state %i with frequency %u and control value %04x\n", i, centrino_model[cpu]->op_points[i].frequency, centrino_model[cpu]->op_points[i].index); } - centrino_model[cpu]->op_points[p.state_count].frequency = CPUFREQ_TABLE_END; + centrino_model[cpu]->op_points[p->state_count].frequency = CPUFREQ_TABLE_END; cur_freq = get_cur_freq(cpu); - for (i=0; istate_count; i++) { + if (!p->states[i].core_frequency) { dprintk("skipping state %u\n", i); centrino_model[cpu]->op_points[i].frequency = CPUFREQ_ENTRY_INVALID; continue; @@ -451,7 +481,7 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) } if (cur_freq == centrino_model[cpu]->op_points[i].frequency) - p.state = i; + p->state = i; } /* notify BIOS that we exist */ @@ -464,12 +494,13 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) err_kfree: kfree(centrino_model[cpu]); err_unreg: - acpi_processor_unregister_performance(&p, cpu); - dprintk("invalid ACPI data\n"); + acpi_processor_unregister_performance(p, cpu); + dprintk(PFX "invalid ACPI data\n"); return (result); } #else static inline int centrino_cpu_init_acpi(struct cpufreq_policy *policy) { return -ENODEV; } +static inline int centrino_cpu_early_init_acpi(void) { return 0; } #endif static int centrino_cpu_init(struct cpufreq_policy *policy) @@ -555,10 +586,15 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy) #ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI if (!centrino_model[cpu]->model_name) { - dprintk("unregistering and freeing ACPI data\n"); - acpi_processor_unregister_performance(&p, cpu); - kfree(centrino_model[cpu]->op_points); - kfree(centrino_model[cpu]); + static struct acpi_processor_performance *p; + + if (acpi_perf_data[cpu]) { + p = acpi_perf_data[cpu]; + dprintk("unregistering and freeing ACPI data\n"); + acpi_processor_unregister_performance(p, cpu); + kfree(centrino_model[cpu]->op_points); + kfree(centrino_model[cpu]); + } } #endif @@ -592,63 +628,128 @@ static int centrino_target (struct cpufreq_policy *policy, unsigned int relation) { unsigned int newstate = 0; - unsigned int msr, oldmsr, h, cpu = policy->cpu; + unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu; struct cpufreq_freqs freqs; + cpumask_t online_policy_cpus; cpumask_t saved_mask; - int retval; + cpumask_t set_mask; + cpumask_t covered_cpus; + int retval = 0; + unsigned int j, k, first_cpu, tmp; - if (centrino_model[cpu] == NULL) + if (unlikely(centrino_model[cpu] == NULL)) return -ENODEV; - /* - * Support for SMP systems. - * Make sure we are running on the CPU that wants to change frequency - */ - saved_mask = current->cpus_allowed; - set_cpus_allowed(current, policy->cpus); - if (!cpu_isset(smp_processor_id(), policy->cpus)) { - dprintk("couldn't limit to CPUs in this domain\n"); - return(-EAGAIN); + if (unlikely(cpufreq_frequency_table_target(policy, + centrino_model[cpu]->op_points, + target_freq, + relation, + &newstate))) { + return -EINVAL; } - if (cpufreq_frequency_table_target(policy, centrino_model[cpu]->op_points, target_freq, - relation, &newstate)) { - retval = -EINVAL; - goto migrate_end; - } +#ifdef CONFIG_HOTPLUG_CPU + /* cpufreq holds the hotplug lock, so we are safe from here on */ + cpus_and(online_policy_cpus, cpu_online_map, policy->cpus); +#else + online_policy_cpus = policy->cpus; +#endif - msr = centrino_model[cpu]->op_points[newstate].index; - rdmsr(MSR_IA32_PERF_CTL, oldmsr, h); + saved_mask = current->cpus_allowed; + first_cpu = 1; + cpus_clear(covered_cpus); + for_each_cpu_mask(j, online_policy_cpus) { + /* + * Support for SMP systems. + * Make sure we are running on CPU that wants to change freq + */ + cpus_clear(set_mask); + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) + cpus_or(set_mask, set_mask, online_policy_cpus); + else + cpu_set(j, set_mask); + + set_cpus_allowed(current, set_mask); + if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) { + dprintk("couldn't limit to CPUs in this domain\n"); + retval = -EAGAIN; + if (first_cpu) { + /* We haven't started the transition yet. */ + goto migrate_end; + } + break; + } - if (msr == (oldmsr & 0xffff)) { - retval = 0; - dprintk("no change needed - msr was and needs to be %x\n", oldmsr); - goto migrate_end; - } + msr = centrino_model[cpu]->op_points[newstate].index; + + if (first_cpu) { + rdmsr(MSR_IA32_PERF_CTL, oldmsr, h); + if (msr == (oldmsr & 0xffff)) { + dprintk("no change needed - msr was and needs " + "to be %x\n", oldmsr); + retval = 0; + goto migrate_end; + } + + freqs.old = extract_clock(oldmsr, cpu, 0); + freqs.new = extract_clock(msr, cpu, 0); + + dprintk("target=%dkHz old=%d new=%d msr=%04x\n", + target_freq, freqs.old, freqs.new, msr); + + for_each_cpu_mask(k, online_policy_cpus) { + freqs.cpu = k; + cpufreq_notify_transition(&freqs, + CPUFREQ_PRECHANGE); + } + + first_cpu = 0; + /* all but 16 LSB are reserved, treat them with care */ + oldmsr &= ~0xffff; + msr &= 0xffff; + oldmsr |= msr; + } - freqs.cpu = cpu; - freqs.old = extract_clock(oldmsr, cpu, 0); - freqs.new = extract_clock(msr, cpu, 0); + wrmsr(MSR_IA32_PERF_CTL, oldmsr, h); + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) + break; - dprintk("target=%dkHz old=%d new=%d msr=%04x\n", - target_freq, freqs.old, freqs.new, msr); + cpu_set(j, covered_cpus); + } - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + for_each_cpu_mask(k, online_policy_cpus) { + freqs.cpu = k; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } - /* all but 16 LSB are "reserved", so treat them with - care */ - oldmsr &= ~0xffff; - msr &= 0xffff; - oldmsr |= msr; + if (unlikely(retval)) { + /* + * We have failed halfway through the frequency change. + * We have sent callbacks to policy->cpus and + * MSRs have already been written on coverd_cpus. + * Best effort undo.. + */ - wrmsr(MSR_IA32_PERF_CTL, oldmsr, h); + if (!cpus_empty(covered_cpus)) { + for_each_cpu_mask(j, covered_cpus) { + set_cpus_allowed(current, cpumask_of_cpu(j)); + wrmsr(MSR_IA32_PERF_CTL, oldmsr, h); + } + } - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + tmp = freqs.new; + freqs.new = freqs.old; + freqs.old = tmp; + for_each_cpu_mask(j, online_policy_cpus) { + freqs.cpu = j; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } + } - retval = 0; migrate_end: set_cpus_allowed(current, saved_mask); - return (retval); + return 0; } static struct freq_attr* centrino_attr[] = { @@ -690,12 +791,25 @@ static int __init centrino_init(void) if (!cpu_has(cpu, X86_FEATURE_EST)) return -ENODEV; + centrino_cpu_early_init_acpi(); + return cpufreq_register_driver(¢rino_driver); } static void __exit centrino_exit(void) { +#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI + unsigned int j; +#endif + cpufreq_unregister_driver(¢rino_driver); + +#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI + for_each_cpu(j) { + kfree(acpi_perf_data[j]); + acpi_perf_data[j] = NULL; + } +#endif } MODULE_AUTHOR ("Jeremy Fitzhardinge "); diff --git a/trunk/arch/i386/kernel/cpu/cyrix.c b/trunk/arch/i386/kernel/cpu/cyrix.c index 00f2e058797c..fc32c8028e24 100644 --- a/trunk/arch/i386/kernel/cpu/cyrix.c +++ b/trunk/arch/i386/kernel/cpu/cyrix.c @@ -184,7 +184,7 @@ static void __init geode_configure(void) #ifdef CONFIG_PCI -static struct pci_device_id cyrix_55x0[] = { +static struct pci_device_id __initdata cyrix_55x0[] = { { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510) }, { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520) }, { }, @@ -272,14 +272,15 @@ static void __init init_cyrix(struct cpuinfo_x86 *c) printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n"); isa_dma_bridge_buggy = 2; -#endif - c->x86_cache_size=16; /* Yep 16K integrated cache thats it */ - + + /* * The 5510/5520 companion chips have a funky PIT. */ if (pci_dev_present(cyrix_55x0)) pit_latch_buggy = 1; +#endif + c->x86_cache_size=16; /* Yep 16K integrated cache thats it */ /* GXm supports extended cpuid levels 'ala' AMD */ if (c->cpuid_level == 2) { diff --git a/trunk/arch/i386/kernel/cpu/proc.c b/trunk/arch/i386/kernel/cpu/proc.c index f94cdb7aca50..a19fcb262dbb 100644 --- a/trunk/arch/i386/kernel/cpu/proc.c +++ b/trunk/arch/i386/kernel/cpu/proc.c @@ -52,7 +52,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* VIA/Cyrix/Centaur-defined */ NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en", - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, diff --git a/trunk/arch/i386/kernel/i387.c b/trunk/arch/i386/kernel/i387.c index d75524758daf..c4351972d9af 100644 --- a/trunk/arch/i386/kernel/i387.c +++ b/trunk/arch/i386/kernel/i387.c @@ -25,7 +25,7 @@ #define HAVE_HWFP 1 #endif -static unsigned long mxcsr_feature_mask = 0xffffffff; +static unsigned long mxcsr_feature_mask __read_mostly = 0xffffffff; void mxcsr_feature_mask_init(void) { diff --git a/trunk/arch/i386/kernel/i8259.c b/trunk/arch/i386/kernel/i8259.c index 323ef8ab3244..b7636b96e104 100644 --- a/trunk/arch/i386/kernel/i8259.c +++ b/trunk/arch/i386/kernel/i8259.c @@ -271,8 +271,8 @@ static int i8259A_shutdown(struct sys_device *dev) * the kernel initialization code can get it * out of. */ - outb(0xff, 0x21); /* mask all of 8259A-1 */ - outb(0xff, 0xA1); /* mask all of 8259A-1 */ + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ return 0; } diff --git a/trunk/arch/i386/kernel/io_apic.c b/trunk/arch/i386/kernel/io_apic.c index d70f2ade5cde..a62df3e764c5 100644 --- a/trunk/arch/i386/kernel/io_apic.c +++ b/trunk/arch/i386/kernel/io_apic.c @@ -267,7 +267,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) # include /* kmalloc() */ # include /* time_after() */ -# ifdef CONFIG_BALANCED_IRQ_DEBUG +#ifdef CONFIG_BALANCED_IRQ_DEBUG # define TDprintk(x...) do { printk("<%ld:%s:%d>: ", jiffies, __FILE__, __LINE__); printk(x); } while (0) # define Dprintk(x...) do { TDprintk(x); } while (0) # else @@ -275,10 +275,15 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) # define Dprintk(x...) # endif - #define IRQBALANCE_CHECK_ARCH -999 -static int irqbalance_disabled = IRQBALANCE_CHECK_ARCH; -static int physical_balance = 0; +#define MAX_BALANCED_IRQ_INTERVAL (5*HZ) +#define MIN_BALANCED_IRQ_INTERVAL (HZ/2) +#define BALANCED_IRQ_MORE_DELTA (HZ/10) +#define BALANCED_IRQ_LESS_DELTA (HZ) + +static int irqbalance_disabled __read_mostly = IRQBALANCE_CHECK_ARCH; +static int physical_balance __read_mostly; +static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL; static struct irq_cpu_info { unsigned long * last_irq; @@ -297,12 +302,14 @@ static struct irq_cpu_info { #define CPU_TO_PACKAGEINDEX(i) (first_cpu(cpu_sibling_map[i])) -#define MAX_BALANCED_IRQ_INTERVAL (5*HZ) -#define MIN_BALANCED_IRQ_INTERVAL (HZ/2) -#define BALANCED_IRQ_MORE_DELTA (HZ/10) -#define BALANCED_IRQ_LESS_DELTA (HZ) +static cpumask_t balance_irq_affinity[NR_IRQS] = { + [0 ... NR_IRQS-1] = CPU_MASK_ALL +}; -static long balanced_irq_interval = MAX_BALANCED_IRQ_INTERVAL; +void set_balance_irq_affinity(unsigned int irq, cpumask_t mask) +{ + balance_irq_affinity[irq] = mask; +} static unsigned long move(int curr_cpu, cpumask_t allowed_mask, unsigned long now, int direction) @@ -340,7 +347,7 @@ static inline void balance_irq(int cpu, int irq) if (irqbalance_disabled) return; - cpus_and(allowed_mask, cpu_online_map, irq_affinity[irq]); + cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]); new_cpu = move(cpu, allowed_mask, now, 1); if (cpu != new_cpu) { set_pending_irq(irq, cpumask_of_cpu(new_cpu)); @@ -529,7 +536,9 @@ static void do_irq_balance(void) } } - cpus_and(allowed_mask, cpu_online_map, irq_affinity[selected_irq]); + cpus_and(allowed_mask, + cpu_online_map, + balance_irq_affinity[selected_irq]); target_cpu_mask = cpumask_of_cpu(min_loaded); cpus_and(tmp, target_cpu_mask, allowed_mask); diff --git a/trunk/arch/i386/kernel/irq.c b/trunk/arch/i386/kernel/irq.c index f3a9c78c4a24..248e922ee13a 100644 --- a/trunk/arch/i386/kernel/irq.c +++ b/trunk/arch/i386/kernel/irq.c @@ -42,8 +42,8 @@ union irq_ctx { u32 stack[THREAD_SIZE/sizeof(u32)]; }; -static union irq_ctx *hardirq_ctx[NR_CPUS]; -static union irq_ctx *softirq_ctx[NR_CPUS]; +static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; +static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; #endif /* diff --git a/trunk/arch/i386/kernel/kprobes.c b/trunk/arch/i386/kernel/kprobes.c index 38806f427849..395a9a6dff88 100644 --- a/trunk/arch/i386/kernel/kprobes.c +++ b/trunk/arch/i386/kernel/kprobes.c @@ -607,7 +607,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; - if (args->regs && user_mode(args->regs)) + if (args->regs && user_mode_vm(args->regs)) return ret; switch (val) { diff --git a/trunk/arch/i386/kernel/microcode.c b/trunk/arch/i386/kernel/microcode.c index e7c138f66c5a..0a865889b2a9 100644 --- a/trunk/arch/i386/kernel/microcode.c +++ b/trunk/arch/i386/kernel/microcode.c @@ -91,7 +91,10 @@ MODULE_DESCRIPTION("Intel CPU (IA-32) Microcode Update Driver"); MODULE_AUTHOR("Tigran Aivazian "); MODULE_LICENSE("GPL"); -#define MICROCODE_VERSION "1.14" +static int verbose; +module_param(verbose, int, 0644); + +#define MICROCODE_VERSION "1.14a" #define DEFAULT_UCODE_DATASIZE (2000) /* 2000 bytes */ #define MC_HEADER_SIZE (sizeof (microcode_header_t)) /* 48 bytes */ @@ -122,14 +125,15 @@ static unsigned int user_buffer_size; /* it's size */ typedef enum mc_error_code { MC_SUCCESS = 0, - MC_NOTFOUND = 1, - MC_MARKED = 2, - MC_ALLOCATED = 3, + MC_IGNORED = 1, + MC_NOTFOUND = 2, + MC_MARKED = 3, + MC_ALLOCATED = 4, } mc_error_code_t; static struct ucode_cpu_info { unsigned int sig; - unsigned int pf; + unsigned int pf, orig_pf; unsigned int rev; unsigned int cksum; mc_error_code_t err; @@ -164,6 +168,7 @@ static void collect_cpu_info (void *unused) rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); uci->pf = 1 << ((val[1] >> 18) & 7); } + uci->orig_pf = uci->pf; } wrmsr(MSR_IA32_UCODE_REV, 0, 0); @@ -197,21 +202,34 @@ static inline void mark_microcode_update (int cpu_num, microcode_header_t *mc_he pr_debug(" Checksum 0x%x\n", cksum); if (mc_header->rev < uci->rev) { - printk(KERN_ERR "microcode: CPU%d not 'upgrading' to earlier revision" - " 0x%x (current=0x%x)\n", cpu_num, mc_header->rev, uci->rev); - goto out; + if (uci->err == MC_NOTFOUND) { + uci->err = MC_IGNORED; + uci->cksum = mc_header->rev; + } else if (uci->err == MC_IGNORED && uci->cksum < mc_header->rev) + uci->cksum = mc_header->rev; } else if (mc_header->rev == uci->rev) { - /* notify the caller of success on this cpu */ - uci->err = MC_SUCCESS; - goto out; + if (uci->err < MC_MARKED) { + /* notify the caller of success on this cpu */ + uci->err = MC_SUCCESS; + } + } else if (uci->err != MC_ALLOCATED || mc_header->rev > uci->mc->hdr.rev) { + pr_debug("microcode: CPU%d found a matching microcode update with " + " revision 0x%x (current=0x%x)\n", cpu_num, mc_header->rev, uci->rev); + uci->cksum = cksum; + uci->pf = pf; /* keep the original mc pf for cksum calculation */ + uci->err = MC_MARKED; /* found the match */ + for_each_online_cpu(cpu_num) { + if (ucode_cpu_info + cpu_num != uci + && ucode_cpu_info[cpu_num].mc == uci->mc) { + uci->mc = NULL; + break; + } + } + if (uci->mc != NULL) { + vfree(uci->mc); + uci->mc = NULL; + } } - - pr_debug("microcode: CPU%d found a matching microcode update with " - " revision 0x%x (current=0x%x)\n", cpu_num, mc_header->rev, uci->rev); - uci->cksum = cksum; - uci->pf = pf; /* keep the original mc pf for cksum calculation */ - uci->err = MC_MARKED; /* found the match */ -out: return; } @@ -253,10 +271,8 @@ static int find_matching_ucodes (void) for_each_online_cpu(cpu_num) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/ - continue; - if (sigmatch(mc_header.sig, uci->sig, mc_header.pf, uci->pf)) + if (sigmatch(mc_header.sig, uci->sig, mc_header.pf, uci->orig_pf)) mark_microcode_update(cpu_num, &mc_header, mc_header.sig, mc_header.pf, mc_header.cksum); } @@ -295,9 +311,8 @@ static int find_matching_ucodes (void) } for_each_online_cpu(cpu_num) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/ - continue; - if (sigmatch(ext_sig.sig, uci->sig, ext_sig.pf, uci->pf)) { + + if (sigmatch(ext_sig.sig, uci->sig, ext_sig.pf, uci->orig_pf)) { mark_microcode_update(cpu_num, &mc_header, ext_sig.sig, ext_sig.pf, ext_sig.cksum); } } @@ -368,6 +383,13 @@ static void do_update_one (void * unused) struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; if (uci->mc == NULL) { + if (verbose) { + if (uci->err == MC_SUCCESS) + printk(KERN_INFO "microcode: CPU%d already at revision 0x%x\n", + cpu_num, uci->rev); + else + printk(KERN_INFO "microcode: No new microcode data for CPU%d\n", cpu_num); + } return; } @@ -426,6 +448,9 @@ static int do_microcode_update (void) ucode_cpu_info[j].mc = NULL; } } + if (ucode_cpu_info[i].err == MC_IGNORED && verbose) + printk(KERN_WARNING "microcode: CPU%d not 'upgrading' to earlier revision" + " 0x%x (current=0x%x)\n", i, ucode_cpu_info[i].cksum, ucode_cpu_info[i].rev); } out: return error; diff --git a/trunk/arch/i386/kernel/setup.c b/trunk/arch/i386/kernel/setup.c index dd6b0e3386ce..e6023970aa40 100644 --- a/trunk/arch/i386/kernel/setup.c +++ b/trunk/arch/i386/kernel/setup.c @@ -48,6 +48,7 @@ #include #include #include +#include #include