diff --git a/[refs] b/[refs] index b3bc82fda63d..56bc94eb1fa2 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 632506a21a3b5f0596e89d55cda6b482bec331a3 +refs/heads/master: bac2f668864eca45b702ee394bef4c5f3a86658c diff --git a/trunk/Documentation/devicetree/bindings/arm/omap/counter.txt b/trunk/Documentation/devicetree/bindings/arm/omap/counter.txt new file mode 100644 index 000000000000..5bd8aa091315 --- /dev/null +++ b/trunk/Documentation/devicetree/bindings/arm/omap/counter.txt @@ -0,0 +1,15 @@ +OMAP Counter-32K bindings + +Required properties: +- compatible: Must be "ti,omap-counter32k" for OMAP controllers +- reg: Contains timer register address range (base address and length) +- ti,hwmods: Name of the hwmod associated to the counter, which is typically + "counter_32k" + +Example: + +counter32k: counter@4a304000 { + compatible = "ti,omap-counter32k"; + reg = <0x4a304000 0x20>; + ti,hwmods = "counter_32k"; +}; diff --git a/trunk/Documentation/devicetree/bindings/arm/omap/timer.txt b/trunk/Documentation/devicetree/bindings/arm/omap/timer.txt new file mode 100644 index 000000000000..8732d4d41f8b --- /dev/null +++ b/trunk/Documentation/devicetree/bindings/arm/omap/timer.txt @@ -0,0 +1,31 @@ +OMAP Timer bindings + +Required properties: +- compatible: Must be "ti,omap2-timer" for OMAP2+ controllers. +- reg: Contains timer register address range (base address and + length). +- interrupts: Contains the interrupt information for the timer. The + format is being dependent on which interrupt controller + the OMAP device uses. +- ti,hwmods: Name of the hwmod associated to the timer, "timer", + where is the instance number of the timer from the + HW spec. + +Optional properties: +- ti,timer-alwon: Indicates the timer is in an alway-on power domain. +- ti,timer-dsp: Indicates the timer can interrupt the on-chip DSP in + addition to the ARM CPU. +- ti,timer-pwm: Indicates the timer can generate a PWM output. +- ti,timer-secure: Indicates the timer is reserved on a secure OMAP device + and therefore cannot be used by the kernel. + +Example: + +timer12: timer@48304000 { + compatible = "ti,omap2-timer"; + reg = <0x48304000 0x400>; + interrupts = <95>; + ti,hwmods = "timer12" + ti,timer-alwon; + ti,timer-secure; +}; diff --git a/trunk/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/trunk/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt index d2fe064a828b..63dd8051521c 100644 --- a/trunk/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt +++ b/trunk/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt @@ -2,9 +2,27 @@ properties: - compatible : Should be "ti,omap-ocp2scp" +- reg : Address and length of the register set for the device - #address-cells, #size-cells : Must be present if the device has sub-nodes - ranges : the child address space are mapped 1:1 onto the parent address space - ti,hwmods : must be "ocp2scp_usb_phy" Sub-nodes: All the devices connected to ocp2scp are described using sub-node to ocp2scp + +ocp2scp@4a0ad000 { + compatible = "ti,omap-ocp2scp"; + reg = <0x4a0ad000 0x1f>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp_usb_phy"; + + subnode1 { + ... + }; + + subnode2 { + ... + }; +}; diff --git a/trunk/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/trunk/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 2f5322b119eb..446859fcdca4 100644 --- a/trunk/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/trunk/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -55,5 +55,7 @@ st-micro,24c256 i2c serial eeprom (24cxx) stm,m41t00 Serial Access TIMEKEEPER stm,m41t62 Serial real-time clock (RTC) with alarm stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS +taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface ti,tsc2003 I2C Touch-Screen Controller ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface +ti,tmp275 Digital Temperature Sensor diff --git a/trunk/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt b/trunk/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt new file mode 100644 index 000000000000..ca5a2c86480c --- /dev/null +++ b/trunk/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt @@ -0,0 +1,28 @@ +* Rohm BU21013 Touch Screen + +Required properties: + - compatible : "rohm,bu21013_tp" + - reg : I2C device address + +Optional properties: + - touch-gpio : GPIO pin registering a touch event + - -supply : Phandle to a regulator supply + - rohm,touch-max-x : Maximum outward permitted limit in the X axis + - rohm,touch-max-y : Maximum outward permitted limit in the Y axis + - rohm,flip-x : Flip touch coordinates on the X axis + - rohm,flip-y : Flip touch coordinates on the Y axis + +Example: + + i2c@80110000 { + bu21013_tp@0x5c { + compatible = "rohm,bu21013_tp"; + reg = <0x5c>; + touch-gpio = <&gpio2 20 0x4>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + + rohm,touch-max-x = <384>; + rohm,touch-max-y = <704>; + rohm,flip-y; + }; + }; diff --git a/trunk/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/trunk/Documentation/devicetree/bindings/usb/am33xx-usb.txt index ca8fa56e9f03..707c1a2dae06 100644 --- a/trunk/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/trunk/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -1,5 +1,7 @@ AM33XX MUSB GLUE - compatible : Should be "ti,musb-am33xx" + - reg : offset and length of register sets, first usbss, then for musb instances + - interrupts : usbss, musb instance interrupts in order - ti,hwmods : must be "usb_otg_hs" - multipoint : Should be "1" indicating the musb controller supports multipoint. This is a MUSB configuration-specific setting. @@ -12,3 +14,22 @@ AM33XX MUSB GLUE represents PERIPHERAL. - power : Should be "250". This signifies the controller can supply upto 500mA when operating in host mode. + +Example: + +usb@47400000 { + compatible = "ti,musb-am33xx"; + reg = <0x47400000 0x1000 /* usbss */ + 0x47401000 0x800 /* musb instance 0 */ + 0x47401800 0x800>; /* musb instance 1 */ + interrupts = <17 /* usbss */ + 18 /* musb instance 0 */ + 19>; /* musb instance 1 */ + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + port0-mode = <3>; + port1-mode = <3>; + power = <250>; + ti,hwmods = "usb_otg_hs"; +}; diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig index f0430deae197..d33dc606f7ec 100644 --- a/trunk/arch/arm/Kconfig +++ b/trunk/arch/arm/Kconfig @@ -924,7 +924,6 @@ config ARCH_OMAP select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_CLK - select NEED_MACH_GPIO_H help Support for TI's OMAP platform (OMAP1/2/3/4). diff --git a/trunk/arch/arm/boot/dts/Makefile b/trunk/arch/arm/boot/dts/Makefile index f37cf9fa5fa0..2458b69e2be6 100644 --- a/trunk/arch/arm/boot/dts/Makefile +++ b/trunk/arch/arm/boot/dts/Makefile @@ -63,15 +63,17 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-m28evk.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ + omap3-beagle.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ omap4-panda.dtb \ - omap4-pandaES.dtb \ - omap4-var_som.dtb \ + omap4-panda-es.dtb \ + omap4-var-som.dtb \ omap4-sdp.dtb \ omap5-evm.dtb \ am335x-evm.dtb \ + am335x-evmsk.dtb \ am335x-bone.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += snowball.dtb diff --git a/trunk/arch/arm/boot/dts/am335x-bone.dts b/trunk/arch/arm/boot/dts/am335x-bone.dts index c634f87e230e..2c338889df1b 100644 --- a/trunk/arch/arm/boot/dts/am335x-bone.dts +++ b/trunk/arch/arm/boot/dts/am335x-bone.dts @@ -13,11 +13,31 @@ model = "TI AM335x BeagleBone"; compatible = "ti,am335x-bone", "ti,am33xx"; + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; @@ -33,6 +53,36 @@ }; }; + + leds { + compatible = "gpio-leds"; + + led@2 { + label = "beaglebone:green:heartbeat"; + gpios = <&gpio2 21 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@3 { + label = "beaglebone:green:mmc0"; + gpios = <&gpio2 22 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio2 23 0>; + default-state = "off"; + }; + + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio2 24 0>; + default-state = "off"; + }; + }; }; /include/ "tps65217.dtsi" diff --git a/trunk/arch/arm/boot/dts/am335x-evm.dts b/trunk/arch/arm/boot/dts/am335x-evm.dts index 185d6325a458..9f65f17ebdf8 100644 --- a/trunk/arch/arm/boot/dts/am335x-evm.dts +++ b/trunk/arch/arm/boot/dts/am335x-evm.dts @@ -13,11 +13,39 @@ model = "TI AM335x EVM"; compatible = "ti,am335x-evm", "ti,am33xx"; + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>; + + matrix_keypad_s0: matrix_keypad_s0 { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x7 /* gpmc_a6.gpio1_22, OUTPUT | MODE7 */ + 0x64 0x27 /* gpmc_a9.gpio1_25, INPUT | MODE7 */ + 0x68 0x27 /* gpmc_a10.gpio1_26, INPUT | MODE7 */ + 0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */ + >; + }; + + volume_keys_s0: volume_keys_s0 { + pinctrl-single,pins = < + 0x150 0x27 /* spi0_sclk.gpio0_2, INPUT | MODE7 */ + 0x154 0x27 /* spi0_d0.gpio0_3, INPUT | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; @@ -31,6 +59,49 @@ reg = <0x2d>; }; }; + + i2c2: i2c@4802a000 { + status = "okay"; + clock-frequency = <100000>; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + + tsl2550: tsl2550@39 { + compatible = "taos,tsl2550"; + reg = <0x39>; + }; + + tmp275: tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + }; }; vbat: fixedregulator@0 { @@ -40,6 +111,53 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; + + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <2>; + + row-gpios = <&gpio2 25 0 /* Bank1, pin25 */ + &gpio2 26 0 /* Bank1, pin26 */ + &gpio2 27 0>; /* Bank1, pin27 */ + + col-gpios = <&gpio2 21 0 /* Bank1, pin21 */ + &gpio2 22 0>; /* Bank1, pin22 */ + + linux,keymap = <0x0000008b /* MENU */ + 0x0100009e /* BACK */ + 0x02000069 /* LEFT */ + 0x0001006a /* RIGHT */ + 0x0101001c /* ENTER */ + 0x0201006c>; /* DOWN */ + }; + + gpio_keys: volume_keys@0 { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + switch@9 { + label = "volume-up"; + linux,code = <115>; + gpios = <&gpio1 2 1>; + gpio-key,wakeup; + }; + + switch@10 { + label = "volume-down"; + linux,code = <114>; + gpios = <&gpio1 3 1>; + gpio-key,wakeup; + }; + }; }; /include/ "tps65910.dtsi" diff --git a/trunk/arch/arm/boot/dts/am335x-evmsk.dts b/trunk/arch/arm/boot/dts/am335x-evmsk.dts new file mode 100644 index 000000000000..f5a6162a4ff2 --- /dev/null +++ b/trunk/arch/arm/boot/dts/am335x-evmsk.dts @@ -0,0 +1,250 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * AM335x Starter Kit + * http://www.ti.com/tool/tmdssk3358 + */ + +/dts-v1/; + +/include/ "am33xx.dtsi" + +/ { + model = "TI AM335x EVM-SK"; + compatible = "ti,am335x-evmsk", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x10 0x7 /* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */ + 0x14 0x7 /* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */ + 0x18 0x7 /* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */ + 0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */ + >; + }; + + gpio_keys_s0: gpio_keys_s0 { + pinctrl-single,pins = < + 0x94 0x27 /* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */ + 0x90 0x27 /* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */ + 0x70 0x27 /* gpmc_wait0.gpio0_30, INPUT | MODE7 */ + 0x9c 0x27 /* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */ + >; + }; + }; + + ocp { + uart1: serial@44e09000 { + status = "okay"; + }; + + i2c1: i2c@44e0b000 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + }; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + + led@1 { + label = "evmsk:green:usr0"; + gpios = <&gpio2 4 0>; + default-state = "off"; + }; + + led@2 { + label = "evmsk:green:usr1"; + gpios = <&gpio2 5 0>; + default-state = "off"; + }; + + led@3 { + label = "evmsk:green:mmc0"; + gpios = <&gpio2 6 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "evmsk:green:heartbeat"; + gpios = <&gpio2 7 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + gpio_buttons: gpio_buttons@0 { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + switch@1 { + label = "button0"; + linux,code = <0x100>; + gpios = <&gpio3 3 0>; + }; + + switch@2 { + label = "button1"; + linux,code = <0x101>; + gpios = <&gpio3 2 0>; + }; + + switch@3 { + label = "button2"; + linux,code = <0x102>; + gpios = <&gpio1 30 0>; + gpio-key,wakeup; + }; + + switch@4 { + label = "button3"; + linux,code = <0x103>; + gpios = <&gpio3 5 0>; + }; + }; +}; + +/include/ "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-always-on; + }; + }; +}; diff --git a/trunk/arch/arm/boot/dts/am33xx.dtsi b/trunk/arch/arm/boot/dts/am33xx.dtsi index bb31bff01998..20a3f29a6bfe 100644 --- a/trunk/arch/arm/boot/dts/am33xx.dtsi +++ b/trunk/arch/arm/boot/dts/am33xx.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,am33xx"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -25,6 +26,21 @@ cpus { cpu@0 { compatible = "arm,cortex-a8"; + + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + 720000 1285000 + 600000 1225000 + 500000 1125000 + 275000 1125000 + >; + voltage-tolerance = <2>; /* 2 percentage */ + clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; @@ -40,6 +56,15 @@ }; }; + am33xx_pinmux: pinmux@44e10800 { + compatible = "pinctrl-single"; + reg = <0x44e10800 0x0238>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + /* * XXX: Use a flat representation of the AM33XX interconnect. * The real AM33XX interconnect network is quite complex.Since @@ -70,7 +95,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x44e07000 0x1000>; - interrupt-parent = <&intc>; interrupts = <96>; }; @@ -82,7 +106,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x4804c000 0x1000>; - interrupt-parent = <&intc>; interrupts = <98>; }; @@ -94,7 +117,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x481ac000 0x1000>; - interrupt-parent = <&intc>; interrupts = <32>; }; @@ -106,7 +128,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x481ae000 0x1000>; - interrupt-parent = <&intc>; interrupts = <62>; }; @@ -115,7 +136,6 @@ ti,hwmods = "uart1"; clock-frequency = <48000000>; reg = <0x44e09000 0x2000>; - interrupt-parent = <&intc>; interrupts = <72>; status = "disabled"; }; @@ -125,7 +145,6 @@ ti,hwmods = "uart2"; clock-frequency = <48000000>; reg = <0x48022000 0x2000>; - interrupt-parent = <&intc>; interrupts = <73>; status = "disabled"; }; @@ -135,7 +154,6 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; reg = <0x48024000 0x2000>; - interrupt-parent = <&intc>; interrupts = <74>; status = "disabled"; }; @@ -145,7 +163,6 @@ ti,hwmods = "uart4"; clock-frequency = <48000000>; reg = <0x481a6000 0x2000>; - interrupt-parent = <&intc>; interrupts = <44>; status = "disabled"; }; @@ -155,7 +172,6 @@ ti,hwmods = "uart5"; clock-frequency = <48000000>; reg = <0x481a8000 0x2000>; - interrupt-parent = <&intc>; interrupts = <45>; status = "disabled"; }; @@ -165,7 +181,6 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; reg = <0x481aa000 0x2000>; - interrupt-parent = <&intc>; interrupts = <46>; status = "disabled"; }; @@ -176,7 +191,6 @@ #size-cells = <0>; ti,hwmods = "i2c1"; reg = <0x44e0b000 0x1000>; - interrupt-parent = <&intc>; interrupts = <70>; status = "disabled"; }; @@ -187,7 +201,6 @@ #size-cells = <0>; ti,hwmods = "i2c2"; reg = <0x4802a000 0x1000>; - interrupt-parent = <&intc>; interrupts = <71>; status = "disabled"; }; @@ -198,7 +211,6 @@ #size-cells = <0>; ti,hwmods = "i2c3"; reg = <0x4819c000 0x1000>; - interrupt-parent = <&intc>; interrupts = <30>; status = "disabled"; }; @@ -207,8 +219,124 @@ compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; reg = <0x44e35000 0x1000>; - interrupt-parent = <&intc>; interrupts = <91>; }; + + dcan0: d_can@481cc000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can0"; + reg = <0x481cc000 0x2000>; + interrupts = <52>; + status = "disabled"; + }; + + dcan1: d_can@481d0000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can1"; + reg = <0x481d0000 0x2000>; + interrupts = <55>; + status = "disabled"; + }; + + timer1: timer@44e31000 { + compatible = "ti,omap2-timer"; + reg = <0x44e31000 0x400>; + interrupts = <67>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48040000 { + compatible = "ti,omap2-timer"; + reg = <0x48040000 0x400>; + interrupts = <68>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48042000 { + compatible = "ti,omap2-timer"; + reg = <0x48042000 0x400>; + interrupts = <69>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48044000 { + compatible = "ti,omap2-timer"; + reg = <0x48044000 0x400>; + interrupts = <92>; + ti,hwmods = "timer4"; + ti,timer-pwm; + }; + + timer5: timer@48046000 { + compatible = "ti,omap2-timer"; + reg = <0x48046000 0x400>; + interrupts = <93>; + ti,hwmods = "timer5"; + ti,timer-pwm; + }; + + timer6: timer@48048000 { + compatible = "ti,omap2-timer"; + reg = <0x48048000 0x400>; + interrupts = <94>; + ti,hwmods = "timer6"; + ti,timer-pwm; + }; + + timer7: timer@4804a000 { + compatible = "ti,omap2-timer"; + reg = <0x4804a000 0x400>; + interrupts = <95>; + ti,hwmods = "timer7"; + ti,timer-pwm; + }; + + rtc@44e3e000 { + compatible = "ti,da830-rtc"; + reg = <0x44e3e000 0x1000>; + interrupts = <75 + 76>; + ti,hwmods = "rtc"; + }; + + spi0: spi@48030000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x48030000 0x400>; + interrupt = <65>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi0"; + status = "disabled"; + }; + + spi1: spi@481a0000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x481a0000 0x400>; + interrupt = <125>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi1"; + status = "disabled"; + }; + + usb@47400000 { + compatible = "ti,musb-am33xx"; + reg = <0x47400000 0x1000 /* usbss */ + 0x47401000 0x800 /* musb instance 0 */ + 0x47401800 0x800>; /* musb instance 1 */ + interrupts = <17 /* usbss */ + 18 /* musb instance 0 */ + 19>; /* musb instance 1 */ + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + port0-mode = <3>; + port1-mode = <3>; + power = <250>; + ti,hwmods = "usb_otg_hs"; + }; }; }; diff --git a/trunk/arch/arm/boot/dts/ccu9540.dts b/trunk/arch/arm/boot/dts/ccu9540.dts new file mode 100644 index 000000000000..04305463f00d --- /dev/null +++ b/trunk/arch/arm/boot/dts/ccu9540.dts @@ -0,0 +1,72 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" + +/ { + model = "ST-Ericsson CCU9540 platform with Device Tree"; + compatible = "st-ericsson,ccu9540", "st-ericsson,u9540"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + soc-u9500 { + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&gpio7 6 0x4>; // 230 + cd-inverted; + + status = "okay"; + }; + + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + + status = "okay"; + }; + + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; + }; + }; +}; diff --git a/trunk/arch/arm/boot/dts/dbx5x0.dtsi b/trunk/arch/arm/boot/dts/dbx5x0.dtsi index 4b0e0ca08f40..7ce45fc461fb 100644 --- a/trunk/arch/arm/boot/dts/dbx5x0.dtsi +++ b/trunk/arch/arm/boot/dts/dbx5x0.dtsi @@ -209,123 +209,103 @@ // DB8500_REGULATOR_VAPE db8500_vape_reg: db8500_vape { regulator-compatible = "db8500_vape"; - regulator-name = "db8500-vape"; regulator-always-on; }; // DB8500_REGULATOR_VARM db8500_varm_reg: db8500_varm { regulator-compatible = "db8500_varm"; - regulator-name = "db8500-varm"; }; // DB8500_REGULATOR_VMODEM db8500_vmodem_reg: db8500_vmodem { regulator-compatible = "db8500_vmodem"; - regulator-name = "db8500-vmodem"; }; // DB8500_REGULATOR_VPLL db8500_vpll_reg: db8500_vpll { regulator-compatible = "db8500_vpll"; - regulator-name = "db8500-vpll"; }; // DB8500_REGULATOR_VSMPS1 db8500_vsmps1_reg: db8500_vsmps1 { regulator-compatible = "db8500_vsmps1"; - regulator-name = "db8500-vsmps1"; }; // DB8500_REGULATOR_VSMPS2 db8500_vsmps2_reg: db8500_vsmps2 { regulator-compatible = "db8500_vsmps2"; - regulator-name = "db8500-vsmps2"; }; // DB8500_REGULATOR_VSMPS3 db8500_vsmps3_reg: db8500_vsmps3 { regulator-compatible = "db8500_vsmps3"; - regulator-name = "db8500-vsmps3"; }; // DB8500_REGULATOR_VRF1 db8500_vrf1_reg: db8500_vrf1 { regulator-compatible = "db8500_vrf1"; - regulator-name = "db8500-vrf1"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSP db8500_sva_mmdsp_reg: db8500_sva_mmdsp { regulator-compatible = "db8500_sva_mmdsp"; - regulator-name = "db8500-sva-mmdsp"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSPRET db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { regulator-compatible = "db8500_sva_mmdsp_ret"; - regulator-name = "db8500-sva-mmdsp-ret"; }; // DB8500_REGULATOR_SWITCH_SVAPIPE db8500_sva_pipe_reg: db8500_sva_pipe { regulator-compatible = "db8500_sva_pipe"; - regulator-name = "db8500_sva_pipe"; }; // DB8500_REGULATOR_SWITCH_SIAMMDSP db8500_sia_mmdsp_reg: db8500_sia_mmdsp { regulator-compatible = "db8500_sia_mmdsp"; - regulator-name = "db8500_sia_mmdsp"; }; // DB8500_REGULATOR_SWITCH_SIAMMDSPRET db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { - regulator-name = "db8500-sia-mmdsp-ret"; }; // DB8500_REGULATOR_SWITCH_SIAPIPE db8500_sia_pipe_reg: db8500_sia_pipe { regulator-compatible = "db8500_sia_pipe"; - regulator-name = "db8500-sia-pipe"; }; // DB8500_REGULATOR_SWITCH_SGA db8500_sga_reg: db8500_sga { regulator-compatible = "db8500_sga"; - regulator-name = "db8500-sga"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_B2R2_MCDE db8500_b2r2_mcde_reg: db8500_b2r2_mcde { regulator-compatible = "db8500_b2r2_mcde"; - regulator-name = "db8500-b2r2-mcde"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_ESRAM12 db8500_esram12_reg: db8500_esram12 { regulator-compatible = "db8500_esram12"; - regulator-name = "db8500-esram12"; }; // DB8500_REGULATOR_SWITCH_ESRAM12RET db8500_esram12_ret_reg: db8500_esram12_ret { regulator-compatible = "db8500_esram12_ret"; - regulator-name = "db8500-esram12-ret"; }; // DB8500_REGULATOR_SWITCH_ESRAM34 db8500_esram34_reg: db8500_esram34 { regulator-compatible = "db8500_esram34"; - regulator-name = "db8500-esram34"; }; // DB8500_REGULATOR_SWITCH_ESRAM34RET db8500_esram34_ret_reg: db8500_esram34_ret { regulator-compatible = "db8500_esram34_ret"; - regulator-name = "db8500-esram34-ret"; }; }; @@ -404,7 +384,6 @@ // supplies to the display/camera ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-compatible = "ab8500_ldo_aux1"; - regulator-name = "V-DISPLAY"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2900000>; regulator-boot-on; @@ -415,7 +394,6 @@ // supplies to the on-board eMMC ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { regulator-compatible = "ab8500_ldo_aux2"; - regulator-name = "V-eMMC1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; }; @@ -423,7 +401,6 @@ // supply for VAUX3; SDcard slots ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { regulator-compatible = "ab8500_ldo_aux3"; - regulator-name = "V-MMC-SD"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; }; @@ -431,49 +408,41 @@ // supply for v-intcore12; VINTCORE12 LDO ab8500_ldo_initcore_reg: ab8500_ldo_initcore { regulator-compatible = "ab8500_ldo_initcore"; - regulator-name = "V-INTCORE"; }; // supply for tvout; gpadc; TVOUT LDO ab8500_ldo_tvout_reg: ab8500_ldo_tvout { regulator-compatible = "ab8500_ldo_tvout"; - regulator-name = "V-TVOUT"; }; // supply for ab8500-usb; USB LDO ab8500_ldo_usb_reg: ab8500_ldo_usb { regulator-compatible = "ab8500_ldo_usb"; - regulator-name = "dummy"; }; // supply for ab8500-vaudio; VAUDIO LDO ab8500_ldo_audio_reg: ab8500_ldo_audio { regulator-compatible = "ab8500_ldo_audio"; - regulator-name = "V-AUD"; }; // supply for v-anamic1 VAMic1-LDO ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { regulator-compatible = "ab8500_ldo_anamic1"; - regulator-name = "V-AMIC1"; }; // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { regulator-compatible = "ab8500_ldo_amamic2"; - regulator-name = "V-AMIC2"; }; // supply for v-dmic; VDMIC LDO ab8500_ldo_dmic_reg: ab8500_ldo_dmic { regulator-compatible = "ab8500_ldo_dmic"; - regulator-name = "V-DMIC"; }; // supply for U8500 CSI/DSI; VANA LDO ab8500_ldo_ana_reg: ab8500_ldo_ana { regulator-compatible = "ab8500_ldo_ana"; - regulator-name = "V-CSI/DSI"; }; }; }; @@ -577,42 +546,42 @@ status = "disabled"; }; - sdi@80126000 { + sdi0_per1@80126000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80126000 0x1000>; interrupts = <0 60 0x4>; status = "disabled"; }; - sdi@80118000 { + sdi1_per2@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; interrupts = <0 50 0x4>; status = "disabled"; }; - sdi@80005000 { + sdi2_per3@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; interrupts = <0 41 0x4>; status = "disabled"; }; - sdi@80119000 { + sdi3_per2@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <0 59 0x4>; status = "disabled"; }; - sdi@80114000 { + sdi4_per2@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; interrupts = <0 99 0x4>; status = "disabled"; }; - sdi@80008000 { + sdi5_per3@80008000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80008000 0x1000>; interrupts = <0 100 0x4>; @@ -660,5 +629,19 @@ ranges = <0 0x50000000 0x4000000>; status = "disabled"; }; + + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + gpios = <&tc3589x_gpio 18 0x4>; + gpio-enable = <&tc3589x_gpio 17 0x4>; + states = <1800000 0x1 + 2900000 0x0>; + }; }; }; diff --git a/trunk/arch/arm/boot/dts/href.dtsi b/trunk/arch/arm/boot/dts/href.dtsi new file mode 100644 index 000000000000..592fb9dc35bd --- /dev/null +++ b/trunk/arch/arm/boot/dts/href.dtsi @@ -0,0 +1,273 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "dbx5x0.dtsi" + +/ { + memory { + reg = <0x00000000 0x20000000>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + linux,code = <11>; + label = "SFH7741 Proximity Sensor"; + }; + }; + + soc-u9500 { + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + i2c@80004000 { + tc3589x@42 { + compatible = "tc3589x"; + reg = <0x42>; + interrupt-parent = <&gpio6>; + interrupts = <25 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + + tc3589x_gpio: tc3589x_gpio { + compatible = "tc3589x-gpio"; + interrupts = <0 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + + i2c@80128000 { + lp5521@0x33 { + compatible = "lp5521"; + reg = <0x33>; + }; + + lp5521@0x34 { + compatible = "lp5521"; + reg = <0x34>; + }; + + bh1780@0x29 { + compatible = "rohm,bh1780gli"; + reg = <0x33>; + }; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&tc3589x_gpio 3 0x4>; + + status = "okay"; + }; + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + + status = "okay"; + }; + + // PoP:ed eMMC + sdi2_per3@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + + status = "okay"; + }; + + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; + }; + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + msp1: msp@80124000 { + status = "okay"; + }; + + msp3: msp@80125000 { + status = "okay"; + }; + + prcmu@80157000 { + db8500-prcmu-regulators { + db8500_vape_reg: db8500_vape { + regulator-name = "db8500-vape"; + }; + + db8500_varm_reg: db8500_varm { + regulator-name = "db8500-varm"; + }; + + db8500_vmodem_reg: db8500_vmodem { + regulator-name = "db8500-vmodem"; + }; + + db8500_vpll_reg: db8500_vpll { + regulator-name = "db8500-vpll"; + }; + + db8500_vsmps1_reg: db8500_vsmps1 { + regulator-name = "db8500-vsmps1"; + }; + + db8500_vsmps2_reg: db8500_vsmps2 { + regulator-name = "db8500-vsmps2"; + }; + + db8500_vsmps3_reg: db8500_vsmps3 { + regulator-name = "db8500-vsmps3"; + }; + + db8500_vrf1_reg: db8500_vrf1 { + regulator-name = "db8500-vrf1"; + }; + + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-name = "db8500-sva-mmdsp"; + }; + + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-name = "db8500-sva-mmdsp-ret"; + }; + + db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-name = "db8500_sva_pipe"; + }; + + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-name = "db8500_sia_mmdsp"; + }; + + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + regulator-name = "db8500-sia-mmdsp-ret"; + }; + + db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-name = "db8500-sia-pipe"; + }; + + db8500_sga_reg: db8500_sga { + regulator-name = "db8500-sga"; + }; + + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-name = "db8500-b2r2-mcde"; + }; + + db8500_esram12_reg: db8500_esram12 { + regulator-name = "db8500-esram12"; + }; + + db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-name = "db8500-esram12-ret"; + }; + + db8500_esram34_reg: db8500_esram34 { + regulator-name = "db8500-esram34"; + }; + + db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-name = "db8500-esram34-ret"; + }; + }; + + ab8500@5 { + ab8500-regulators { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; + + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; + + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; + + ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-name = "dummy"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + }; + }; + }; +}; diff --git a/trunk/arch/arm/boot/dts/hrefprev60.dts b/trunk/arch/arm/boot/dts/hrefprev60.dts new file mode 100644 index 000000000000..b398946fd64a --- /dev/null +++ b/trunk/arch/arm/boot/dts/hrefprev60.dts @@ -0,0 +1,41 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" +/include/ "href.dtsi" +/include/ "stuib.dtsi" + +/ { + model = "ST-Ericsson HREF (pre-v60) platform with Device Tree"; + compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + + gpio_keys { + button@1 { + gpios = <&tc3589x_gpio 7 0x4>; + }; + }; + + soc-u9500 { + i2c@80004000 { + tps61052@33 { + compatible = "tps61052"; + reg = <0x33>; + }; + }; + + i2c@80110000 { + bu21013_tp@0x5c { + reset-gpio = <&tc3589x_gpio 13 0x4>; + }; + }; + }; +}; diff --git a/trunk/arch/arm/boot/dts/hrefv60plus.dts b/trunk/arch/arm/boot/dts/hrefv60plus.dts index 2131d77dc9c9..a01ac8f000d6 100644 --- a/trunk/arch/arm/boot/dts/hrefv60plus.dts +++ b/trunk/arch/arm/boot/dts/hrefv60plus.dts @@ -11,85 +11,24 @@ /dts-v1/; /include/ "dbx5x0.dtsi" +/include/ "href.dtsi" +/include/ "stuib.dtsi" / { - model = "ST-Ericsson HREF platform with Device Tree"; - compatible = "st-ericsson,hrefv60+"; + model = "ST-Ericsson HREF (v60+) platform with Device Tree"; + compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; - memory { - reg = <0x00000000 0x20000000>; + gpio_keys { + button@1 { + gpios = <&gpio6 25 0x4>; + }; }; soc-u9500 { - uart@80120000 { - status = "okay"; - }; - - uart@80121000 { - status = "okay"; - }; - - uart@80007000 { - status = "okay"; - }; - - i2c@80004000 { - tc3589x@42 { - compatible = "tc3589x"; - reg = <0x42>; - interrupt-parent = <&gpio6>; - interrupts = <25 0x1>; - - interrupt-controller; - #interrupt-cells = <2>; - - tc3589x_gpio: tc3589x_gpio { - compatible = "tc3589x-gpio"; - interrupts = <0 0x1>; - - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - }; - }; - - tps61052@33 { - compatible = "tps61052"; - reg = <0x33>; - }; - }; - - i2c@80128000 { - lp5521@0x33 { - compatible = "lp5521"; - reg = <0x33>; - }; - - lp5521@0x34 { - compatible = "lp5521"; - reg = <0x34>; + i2c@80110000 { + bu21013_tp@0x5c { + reset-gpio = <&gpio4 15 0x4>; }; - - bh1780@0x29 { - compatible = "rohm,bh1780gli"; - reg = <0x33>; - }; - }; - - sound { - compatible = "stericsson,snd-soc-mop500"; - - stericsson,cpu-dai = <&msp1 &msp3>; - stericsson,audio-codec = <&codec>; - }; - - msp1: msp@80124000 { - status = "okay"; - }; - - msp3: msp@80125000 { - status = "okay"; }; }; }; diff --git a/trunk/arch/arm/boot/dts/omap2.dtsi b/trunk/arch/arm/boot/dts/omap2.dtsi index 581cb081cb0f..761c4b69b25b 100644 --- a/trunk/arch/arm/boot/dts/omap2.dtsi +++ b/trunk/arch/arm/boot/dts/omap2.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,omap2430", "ti,omap2420", "ti,omap2"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -65,5 +66,90 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; }; + + timer2: timer@4802a000 { + compatible = "ti,omap2-timer"; + reg = <0x4802a000 0x400>; + interrupts = <38>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48078000 { + compatible = "ti,omap2-timer"; + reg = <0x48078000 0x400>; + interrupts = <39>; + ti,hwmods = "timer3"; + }; + + timer4: timer@4807a000 { + compatible = "ti,omap2-timer"; + reg = <0x4807a000 0x400>; + interrupts = <40>; + ti,hwmods = "timer4"; + }; + + timer5: timer@4807c000 { + compatible = "ti,omap2-timer"; + reg = <0x4807c000 0x400>; + interrupts = <41>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4807e000 { + compatible = "ti,omap2-timer"; + reg = <0x4807e000 0x400>; + interrupts = <42>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@48080000 { + compatible = "ti,omap2-timer"; + reg = <0x48080000 0x400>; + interrupts = <43>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@48082000 { + compatible = "ti,omap2-timer"; + reg = <0x48082000 0x400>; + interrupts = <44>; + ti,hwmods = "timer8"; + ti,timer-dsp; + }; + + timer9: timer@48084000 { + compatible = "ti,omap2-timer"; + reg = <0x48084000 0x400>; + interrupts = <45>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x400>; + interrupts = <46>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x400>; + interrupts = <47>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + timer12: timer@4808a000 { + compatible = "ti,omap2-timer"; + reg = <0x4808a000 0x400>; + interrupts = <48>; + ti,hwmods = "timer12"; + ti,timer-pwm; + }; }; }; diff --git a/trunk/arch/arm/boot/dts/omap2420.dtsi b/trunk/arch/arm/boot/dts/omap2420.dtsi index bfd76b4a0ddc..af6560908905 100644 --- a/trunk/arch/arm/boot/dts/omap2420.dtsi +++ b/trunk/arch/arm/boot/dts/omap2420.dtsi @@ -14,6 +14,12 @@ compatible = "ti,omap2420", "ti,omap2"; ocp { + counter32k: counter@48004000 { + compatible = "ti,omap-counter32k"; + reg = <0x48004000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap2420_pmx: pinmux@48000030 { compatible = "ti,omap2420-padconf", "pinctrl-single"; reg = <0x48000030 0x0113>; @@ -30,7 +36,6 @@ interrupts = <59>, /* TX interrupt */ <60>; /* RX interrupt */ interrupt-names = "tx", "rx"; - interrupt-parent = <&intc>; ti,hwmods = "mcbsp1"; }; @@ -41,8 +46,15 @@ interrupts = <62>, /* TX interrupt */ <63>; /* RX interrupt */ interrupt-names = "tx", "rx"; - interrupt-parent = <&intc>; ti,hwmods = "mcbsp2"; }; + + timer1: timer@48028000 { + compatible = "ti,omap2-timer"; + reg = <0x48028000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; }; }; diff --git a/trunk/arch/arm/boot/dts/omap2430.dtsi b/trunk/arch/arm/boot/dts/omap2430.dtsi index 4565d9750f4d..c3924457c9b6 100644 --- a/trunk/arch/arm/boot/dts/omap2430.dtsi +++ b/trunk/arch/arm/boot/dts/omap2430.dtsi @@ -14,6 +14,12 @@ compatible = "ti,omap2430", "ti,omap2"; ocp { + counter32k: counter@49020000 { + compatible = "ti,omap-counter32k"; + reg = <0x49020000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap2430_pmx: pinmux@49002030 { compatible = "ti,omap2430-padconf", "pinctrl-single"; reg = <0x49002030 0x0154>; @@ -32,7 +38,6 @@ <60>, /* RX interrupt */ <61>; /* RX overflow interrupt */ interrupt-names = "common", "tx", "rx", "rx_overflow"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -45,7 +50,6 @@ <62>, /* TX interrupt */ <63>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -58,7 +62,6 @@ <89>, /* TX interrupt */ <90>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; @@ -71,7 +74,6 @@ <54>, /* TX interrupt */ <55>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -84,9 +86,16 @@ <81>, /* TX interrupt */ <82>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; }; + + timer1: timer@49018000 { + compatible = "ti,omap2-timer"; + reg = <0x49018000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; }; }; diff --git a/trunk/arch/arm/boot/dts/omap3-beagle-xm.dts b/trunk/arch/arm/boot/dts/omap3-beagle-xm.dts index c38cf76df81f..3705a81c1fc2 100644 --- a/trunk/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/trunk/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -55,12 +55,6 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; - vsim: regulator-vsim { - compatible = "ti,twl4030-vsim"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - twl_audio: audio { compatible = "ti,twl4030-audio"; codec { diff --git a/trunk/arch/arm/boot/dts/omap3-beagle.dts b/trunk/arch/arm/boot/dts/omap3-beagle.dts new file mode 100644 index 000000000000..f624dc85d441 --- /dev/null +++ b/trunk/arch/arm/boot/dts/omap3-beagle.dts @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + model = "TI OMAP3 BeagleBoard"; + compatible = "ti,omap3-beagle", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + compatible = "gpio-leds"; + pmu_stat { + label = "beagleboard::pmu_stat"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + }; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; + }; + +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; diff --git a/trunk/arch/arm/boot/dts/omap3.dtsi b/trunk/arch/arm/boot/dts/omap3.dtsi index 696e929d0304..1acc26148ffc 100644 --- a/trunk/arch/arm/boot/dts/omap3.dtsi +++ b/trunk/arch/arm/boot/dts/omap3.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,omap3430", "ti,omap3"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -60,6 +61,12 @@ ranges; ti,hwmods = "l3_main"; + counter32k: counter@48320000 { + compatible = "ti,omap-counter32k"; + reg = <0x48320000 0x20>; + ti,hwmods = "counter_32k"; + }; + intc: interrupt-controller@48200000 { compatible = "ti,omap2-intc"; interrupt-controller; @@ -240,7 +247,6 @@ <59>, /* TX interrupt */ <60>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -255,7 +261,6 @@ <63>, /* RX interrupt */ <4>; /* Sidetone */ interrupt-names = "common", "tx", "rx", "sidetone"; - interrupt-parent = <&intc>; ti,buffer-size = <1280>; ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; }; @@ -270,7 +275,6 @@ <90>, /* RX interrupt */ <5>; /* Sidetone */ interrupt-names = "common", "tx", "rx", "sidetone"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; }; @@ -283,7 +287,6 @@ <54>, /* TX interrupt */ <55>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -296,9 +299,103 @@ <81>, /* TX interrupt */ <82>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; }; + + timer1: timer@48318000 { + compatible = "ti,omap2-timer"; + reg = <0x48318000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@49032000 { + compatible = "ti,omap2-timer"; + reg = <0x49032000 0x400>; + interrupts = <38>; + ti,hwmods = "timer2"; + }; + + timer3: timer@49034000 { + compatible = "ti,omap2-timer"; + reg = <0x49034000 0x400>; + interrupts = <39>; + ti,hwmods = "timer3"; + }; + + timer4: timer@49036000 { + compatible = "ti,omap2-timer"; + reg = <0x49036000 0x400>; + interrupts = <40>; + ti,hwmods = "timer4"; + }; + + timer5: timer@49038000 { + compatible = "ti,omap2-timer"; + reg = <0x49038000 0x400>; + interrupts = <41>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4903a000 { + compatible = "ti,omap2-timer"; + reg = <0x4903a000 0x400>; + interrupts = <42>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@4903c000 { + compatible = "ti,omap2-timer"; + reg = <0x4903c000 0x400>; + interrupts = <43>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4903e000 { + compatible = "ti,omap2-timer"; + reg = <0x4903e000 0x400>; + interrupts = <44>; + ti,hwmods = "timer8"; + ti,timer-pwm; + ti,timer-dsp; + }; + + timer9: timer@49040000 { + compatible = "ti,omap2-timer"; + reg = <0x49040000 0x400>; + interrupts = <45>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x400>; + interrupts = <46>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x400>; + interrupts = <47>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + timer12: timer@48304000 { + compatible = "ti,omap2-timer"; + reg = <0x48304000 0x400>; + interrupts = <95>; + ti,hwmods = "timer12"; + ti,timer-alwon; + ti,timer-secure; + }; }; }; diff --git a/trunk/arch/arm/boot/dts/omap4-panda-a4.dts b/trunk/arch/arm/boot/dts/omap4-panda-a4.dts new file mode 100644 index 000000000000..75466d2abfb5 --- /dev/null +++ b/trunk/arch/arm/boot/dts/omap4-panda-a4.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-panda.dts" + +/* Pandaboard Rev A4+ have external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/trunk/arch/arm/boot/dts/omap4-pandaES.dts b/trunk/arch/arm/boot/dts/omap4-panda-es.dts similarity index 70% rename from trunk/arch/arm/boot/dts/omap4-pandaES.dts rename to trunk/arch/arm/boot/dts/omap4-panda-es.dts index d4ba43a48d9b..73bc1a67e444 100644 --- a/trunk/arch/arm/boot/dts/omap4-pandaES.dts +++ b/trunk/arch/arm/boot/dts/omap4-panda-es.dts @@ -22,3 +22,12 @@ "AFML", "Line In", "AFMR", "Line In"; }; + +/* PandaboardES has external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/trunk/arch/arm/boot/dts/omap4-panda.dts b/trunk/arch/arm/boot/dts/omap4-panda.dts index e8f927cbb376..4122efe31cfd 100644 --- a/trunk/arch/arm/boot/dts/omap4-panda.dts +++ b/trunk/arch/arm/boot/dts/omap4-panda.dts @@ -65,6 +65,8 @@ &twl6040_pins &mcpdm_pins &mcbsp1_pins + &dss_hdmi_pins + &tpd12s015_pins >; twl6040_pins: pinmux_twl6040_pins { @@ -92,6 +94,22 @@ 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; }; &i2c1 { @@ -184,3 +202,7 @@ &dmic { status = "disabled"; }; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; diff --git a/trunk/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/trunk/arch/arm/boot/dts/omap4-sdp-es23plus.dts new file mode 100644 index 000000000000..b4a40ffbce31 --- /dev/null +++ b/trunk/arch/arm/boot/dts/omap4-sdp-es23plus.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-sdp.dts" + +/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/trunk/arch/arm/boot/dts/omap4-sdp.dts b/trunk/arch/arm/boot/dts/omap4-sdp.dts index 5b7e04fbff50..43e5258a9372 100644 --- a/trunk/arch/arm/boot/dts/omap4-sdp.dts +++ b/trunk/arch/arm/boot/dts/omap4-sdp.dts @@ -124,6 +124,8 @@ &dmic_pins &mcbsp1_pins &mcbsp2_pins + &dss_hdmi_pins + &tpd12s015_pins >; uart2_pins: pinmux_uart2_pins { @@ -194,6 +196,22 @@ 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; }; &i2c1 { @@ -406,3 +424,7 @@ &mcbsp3 { status = "disabled"; }; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; diff --git a/trunk/arch/arm/boot/dts/omap4-var_som.dts b/trunk/arch/arm/boot/dts/omap4-var-som.dts similarity index 100% rename from trunk/arch/arm/boot/dts/omap4-var_som.dts rename to trunk/arch/arm/boot/dts/omap4-var-som.dts diff --git a/trunk/arch/arm/boot/dts/omap4.dtsi b/trunk/arch/arm/boot/dts/omap4.dtsi index 3883f94fdbd0..739bb79e410e 100644 --- a/trunk/arch/arm/boot/dts/omap4.dtsi +++ b/trunk/arch/arm/boot/dts/omap4.dtsi @@ -95,6 +95,12 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + counter32k: counter@4a304000 { + compatible = "ti,omap-counter32k"; + reg = <0x4a304000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap4_pmx_core: pinmux@4a100040 { compatible = "ti,omap4-padconf", "pinctrl-single"; reg = <0x4a100040 0x0196>; @@ -340,7 +346,6 @@ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; @@ -350,7 +355,6 @@ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; @@ -361,7 +365,6 @@ reg-names = "mpu", "dma"; interrupts = <0 17 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -373,7 +376,6 @@ reg-names = "mpu", "dma"; interrupts = <0 22 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -385,7 +387,6 @@ reg-names = "mpu", "dma"; interrupts = <0 23 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; @@ -396,7 +397,6 @@ reg-names = "mpu"; interrupts = <0 16 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -431,12 +431,103 @@ hw-caps-temp-alert; }; - ocp2scp { + ocp2scp@4a0ad000 { compatible = "ti,omap-ocp2scp"; + reg = <0x4a0ad000 0x1f>; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "ocp2scp_usb_phy"; }; + + timer1: timer@4a318000 { + compatible = "ti,omap2-timer"; + reg = <0x4a318000 0x80>; + interrupts = <0 37 0x4>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap2-timer"; + reg = <0x48032000 0x80>; + interrupts = <0 38 0x4>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap2-timer"; + reg = <0x48034000 0x80>; + interrupts = <0 39 0x4>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap2-timer"; + reg = <0x48036000 0x80>; + interrupts = <0 40 0x4>; + ti,hwmods = "timer4"; + }; + + timer5: timer@40138000 { + compatible = "ti,omap2-timer"; + reg = <0x40138000 0x80>, + <0x49038000 0x80>; + interrupts = <0 41 0x4>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4013a000 { + compatible = "ti,omap2-timer"; + reg = <0x4013a000 0x80>, + <0x4903a000 0x80>; + interrupts = <0 42 0x4>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@4013c000 { + compatible = "ti,omap2-timer"; + reg = <0x4013c000 0x80>, + <0x4903c000 0x80>; + interrupts = <0 43 0x4>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4013e000 { + compatible = "ti,omap2-timer"; + reg = <0x4013e000 0x80>, + <0x4903e000 0x80>; + interrupts = <0 44 0x4>; + ti,hwmods = "timer8"; + ti,timer-pwm; + ti,timer-dsp; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap2-timer"; + reg = <0x4803e000 0x80>; + interrupts = <0 45 0x4>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x80>; + interrupts = <0 46 0x4>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x80>; + interrupts = <0 47 0x4>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; }; }; diff --git a/trunk/arch/arm/boot/dts/omap5-evm.dts b/trunk/arch/arm/boot/dts/omap5-evm.dts index c663eba73168..8722c15bbba2 100644 --- a/trunk/arch/arm/boot/dts/omap5-evm.dts +++ b/trunk/arch/arm/boot/dts/omap5-evm.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap5.dtsi" +/include/ "samsung_k3pe0e000b.dtsi" / { model = "TI OMAP5 EVM board"; @@ -15,7 +16,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ + reg = <0x80000000 0x80000000>; /* 2 GB */ }; vmmcsd_fixed: fixedregulator-mmcsd { @@ -140,3 +141,13 @@ &mcbsp3 { status = "disabled"; }; + +&emif1 { + cs1-used; + device-handle = <&samsung_K3PE0E000B>; +}; + +&emif2 { + cs1-used; + device-handle = <&samsung_K3PE0E000B>; +}; diff --git a/trunk/arch/arm/boot/dts/omap5.dtsi b/trunk/arch/arm/boot/dts/omap5.dtsi index 42c78beb4fdc..790bb2a4b343 100644 --- a/trunk/arch/arm/boot/dts/omap5.dtsi +++ b/trunk/arch/arm/boot/dts/omap5.dtsi @@ -77,6 +77,12 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + counter32k: counter@4ae04000 { + compatible = "ti,omap-counter32k"; + reg = <0x4ae04000 0x40>; + ti,hwmods = "counter_32k"; + }; + omap5_pmx_core: pinmux@4a002840 { compatible = "ti,omap4-padconf", "pinctrl-single"; reg = <0x4a002840 0x01b6>; @@ -104,6 +110,8 @@ gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; + reg = <0x4ae10000 0x200>; + interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -113,6 +121,8 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; + reg = <0x48055000 0x200>; + interrupts = <0 30 0x4>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -122,6 +132,8 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; + reg = <0x48057000 0x200>; + interrupts = <0 31 0x4>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -131,6 +143,8 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; + reg = <0x48059000 0x200>; + interrupts = <0 32 0x4>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -140,6 +154,8 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; + reg = <0x4805b000 0x200>; + interrupts = <0 33 0x4>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -149,6 +165,8 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; + reg = <0x4805d000 0x200>; + interrupts = <0 34 0x4>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -158,6 +176,8 @@ gpio7: gpio@48051000 { compatible = "ti,omap4-gpio"; + reg = <0x48051000 0x200>; + interrupts = <0 35 0x4>; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; @@ -167,6 +187,8 @@ gpio8: gpio@48053000 { compatible = "ti,omap4-gpio"; + reg = <0x48053000 0x200>; + interrupts = <0 121 0x4>; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; @@ -176,6 +198,8 @@ i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; + reg = <0x48070000 0x100>; + interrupts = <0 56 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -183,6 +207,8 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; + reg = <0x48072000 0x100>; + interrupts = <0 57 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -190,20 +216,26 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; + reg = <0x48060000 0x100>; + interrupts = <0 61 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; }; - i2c4: i2c@4807A000 { + i2c4: i2c@4807a000 { compatible = "ti,omap4-i2c"; + reg = <0x4807a000 0x100>; + interrupts = <0 62 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; }; - i2c5: i2c@4807C000 { + i2c5: i2c@4807c000 { compatible = "ti,omap4-i2c"; + reg = <0x4807c000 0x100>; + interrupts = <0 60 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; @@ -211,42 +243,56 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts = <0 72 0x4>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap4-uart"; + reg = <0x4806c000 0x100>; + interrupts = <0 73 0x4>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; uart3: serial@48020000 { compatible = "ti,omap4-uart"; + reg = <0x48020000 0x100>; + interrupts = <0 74 0x4>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; uart4: serial@4806e000 { compatible = "ti,omap4-uart"; + reg = <0x4806e000 0x100>; + interrupts = <0 70 0x4>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; uart5: serial@48066000 { - compatible = "ti,omap5-uart"; + compatible = "ti,omap4-uart"; + reg = <0x48066000 0x100>; + interrupts = <0 105 0x4>; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; uart6: serial@48068000 { - compatible = "ti,omap6-uart"; + compatible = "ti,omap4-uart"; + reg = <0x48068000 0x100>; + interrupts = <0 106 0x4>; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + interrupts = <0 83 0x4>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -254,24 +300,32 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480b4000 0x400>; + interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; }; mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480ad000 0x400>; + interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; }; mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d1000 0x400>; + interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; }; mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d5000 0x400>; + interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; }; @@ -287,7 +341,6 @@ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; @@ -297,7 +350,6 @@ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; @@ -308,7 +360,6 @@ reg-names = "mpu", "dma"; interrupts = <0 17 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -320,7 +371,6 @@ reg-names = "mpu", "dma"; interrupts = <0 22 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -332,9 +382,119 @@ reg-names = "mpu", "dma"; interrupts = <0 23 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; + + timer1: timer@4ae18000 { + compatible = "ti,omap2-timer"; + reg = <0x4ae18000 0x80>; + interrupts = <0 37 0x4>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap2-timer"; + reg = <0x48032000 0x80>; + interrupts = <0 38 0x4>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap2-timer"; + reg = <0x48034000 0x80>; + interrupts = <0 39 0x4>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap2-timer"; + reg = <0x48036000 0x80>; + interrupts = <0 40 0x4>; + ti,hwmods = "timer4"; + }; + + timer5: timer@40138000 { + compatible = "ti,omap2-timer"; + reg = <0x40138000 0x80>, + <0x49038000 0x80>; + interrupts = <0 41 0x4>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4013a000 { + compatible = "ti,omap2-timer"; + reg = <0x4013a000 0x80>, + <0x4903a000 0x80>; + interrupts = <0 42 0x4>; + ti,hwmods = "timer6"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer7: timer@4013c000 { + compatible = "ti,omap2-timer"; + reg = <0x4013c000 0x80>, + <0x4903c000 0x80>; + interrupts = <0 43 0x4>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4013e000 { + compatible = "ti,omap2-timer"; + reg = <0x4013e000 0x80>, + <0x4903e000 0x80>; + interrupts = <0 44 0x4>; + ti,hwmods = "timer8"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap2-timer"; + reg = <0x4803e000 0x80>; + interrupts = <0 45 0x4>; + ti,hwmods = "timer9"; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x80>; + interrupts = <0 46 0x4>; + ti,hwmods = "timer10"; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x80>; + interrupts = <0 47 0x4>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + emif1: emif@0x4c000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif1"; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4c000000 0x400>; + interrupts = <0 110 0x4>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + emif2: emif@0x4d000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif2"; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4d000000 0x400>; + interrupts = <0 111 0x4>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; }; diff --git a/trunk/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi b/trunk/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi new file mode 100644 index 000000000000..9657a5cbc3ad --- /dev/null +++ b/trunk/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi @@ -0,0 +1,67 @@ +/* + * Timings and Geometry for Samsung K3PE0E000B memory part + */ + +/ { + samsung_K3PE0E000B: lpddr2 { + compatible = "Samsung,K3PE0E000B","jedec,lpddr2-s4"; + density = <4096>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <533333333>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + + timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <266666666>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + }; +}; diff --git a/trunk/arch/arm/boot/dts/snowball.dts b/trunk/arch/arm/boot/dts/snowball.dts index 702c0baa6004..9e02a913eb62 100644 --- a/trunk/arch/arm/boot/dts/snowball.dts +++ b/trunk/arch/arm/boot/dts/snowball.dts @@ -14,7 +14,7 @@ / { model = "Calao Systems Snowball platform with device tree"; - compatible = "calaosystems,snowball-a9500"; + compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500"; memory { reg = <0x00000000 0x20000000>; @@ -120,10 +120,10 @@ }; // External Micro SD slot - sdi@80126000 { + sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; max-frequency = <50000000>; - bus-width = <8>; + bus-width = <4>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; @@ -134,7 +134,7 @@ }; // On-board eMMC - sdi@80114000 { + sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; max-frequency = <50000000>; bus-width = <8>; @@ -183,5 +183,137 @@ reg = <0x33>; }; }; + + prcmu@80157000 { + db8500-prcmu-regulators { + db8500_vape_reg: db8500_vape { + regulator-name = "db8500-vape"; + }; + + db8500_varm_reg: db8500_varm { + regulator-name = "db8500-varm"; + }; + + db8500_vmodem_reg: db8500_vmodem { + regulator-name = "db8500-vmodem"; + }; + + db8500_vpll_reg: db8500_vpll { + regulator-name = "db8500-vpll"; + }; + + db8500_vsmps1_reg: db8500_vsmps1 { + regulator-name = "db8500-vsmps1"; + }; + + db8500_vsmps2_reg: db8500_vsmps2 { + regulator-name = "db8500-vsmps2"; + }; + + db8500_vsmps3_reg: db8500_vsmps3 { + regulator-name = "db8500-vsmps3"; + }; + + db8500_vrf1_reg: db8500_vrf1 { + regulator-name = "db8500-vrf1"; + }; + + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-name = "db8500-sva-mmdsp"; + }; + + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-name = "db8500-sva-mmdsp-ret"; + }; + + db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-name = "db8500_sva_pipe"; + }; + + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-name = "db8500_sia_mmdsp"; + }; + + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + regulator-name = "db8500-sia-mmdsp-ret"; + }; + + db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-name = "db8500-sia-pipe"; + }; + + db8500_sga_reg: db8500_sga { + regulator-name = "db8500-sga"; + }; + + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-name = "db8500-b2r2-mcde"; + }; + + db8500_esram12_reg: db8500_esram12 { + regulator-name = "db8500-esram12"; + }; + + db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-name = "db8500-esram12-ret"; + }; + + db8500_esram34_reg: db8500_esram34 { + regulator-name = "db8500-esram34"; + }; + + db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-name = "db8500-esram34-ret"; + }; + }; + + ab8500@5 { + ab8500-regulators { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; + + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; + + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; + + ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-name = "dummy"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + }; + }; }; }; diff --git a/trunk/arch/arm/boot/dts/stuib.dtsi b/trunk/arch/arm/boot/dts/stuib.dtsi new file mode 100644 index 000000000000..39446a247e79 --- /dev/null +++ b/trunk/arch/arm/boot/dts/stuib.dtsi @@ -0,0 +1,78 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + soc-u9500 { + i2c@80004000 { + stmpe1601: stmpe1601@40 { + compatible = "st,stmpe1601"; + reg = <0x40>; + interrupts = <26 0x1>; + interrupt-parent = <&gpio6>; + interrupt-controller; + + wakeup-source; + st,autosleep-timeout = <1024>; + + stmpe_keypad { + compatible = "st,stmpe-keypad"; + + debounce-interval = <64>; + st,scan-count = <8>; + st,no-autorepeat; + + linux,keymap = <0x205006b + 0x4010074 + 0x3050072 + 0x1030004 + 0x502006a + 0x500000a + 0x5008b + 0x706001c + 0x405000b + 0x6070003 + 0x3040067 + 0x303006c + 0x60400e7 + 0x602009e + 0x4020073 + 0x5050002 + 0x4030069 + 0x3020008>; + }; + }; + }; + + i2c@80110000 { + bu21013_tp@0x5c { + compatible = "rhom,bu21013_tp"; + reg = <0x5c>; + touch-gpio = <&gpio2 20 0x4>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + + rhom,touch-max-x = <384>; + rhom,touch-max-y = <704>; + rhom,flip-y; + }; + + bu21013_tp@0x5d { + compatible = "rhom,bu21013_tp"; + reg = <0x5d>; + touch-gpio = <&gpio2 20 0x4>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + + rhom,touch-max-x = <384>; + rhom,touch-max-y = <704>; + rhom,flip-y; + }; + }; + }; +}; diff --git a/trunk/arch/arm/boot/dts/twl4030.dtsi b/trunk/arch/arm/boot/dts/twl4030.dtsi index ff000172c93c..63411b036932 100644 --- a/trunk/arch/arm/boot/dts/twl4030.dtsi +++ b/trunk/arch/arm/boot/dts/twl4030.dtsi @@ -37,6 +37,24 @@ regulator-max-microvolt = <3150000>; }; + vusb1v5: regulator-vusb1v5 { + compatible = "ti,twl4030-vusb1v5"; + }; + + vusb1v8: regulator-vusb1v8 { + compatible = "ti,twl4030-vusb1v8"; + }; + + vusb3v1: regulator-vusb3v1 { + compatible = "ti,twl4030-vusb3v1"; + }; + + vsim: regulator-vsim { + compatible = "ti,twl4030-vsim"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + twl_gpio: gpio { compatible = "ti,twl4030-gpio"; gpio-controller; @@ -44,4 +62,13 @@ interrupt-controller; #interrupt-cells = <1>; }; + + twl4030-usb { + compatible = "ti,twl4030-usb"; + interrupts = <10>, <4>; + usb1v5-supply = <&vusb1v5>; + usb1v8-supply = <&vusb1v8>; + usb3v1-supply = <&vusb3v1>; + usb_mode = <1>; + }; }; diff --git a/trunk/arch/arm/boot/dts/twl6030.dtsi b/trunk/arch/arm/boot/dts/twl6030.dtsi index 123e2c40218a..9996cfc5ee80 100644 --- a/trunk/arch/arm/boot/dts/twl6030.dtsi +++ b/trunk/arch/arm/boot/dts/twl6030.dtsi @@ -86,4 +86,9 @@ clk32kg: regulator-clk32kg { compatible = "ti,twl6030-clk32kg"; }; + + twl_usb_comparator: usb-comparator { + compatible = "ti,twl6030-usb"; + interrupts = <4>, <10>; + }; }; diff --git a/trunk/arch/arm/configs/u8500_defconfig b/trunk/arch/arm/configs/u8500_defconfig index da6845493caa..6fe7ede6f0c2 100644 --- a/trunk/arch/arm/configs/u8500_defconfig +++ b/trunk/arch/arm/configs/u8500_defconfig @@ -76,6 +76,7 @@ CONFIG_AB8500_CORE=y CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y # CONFIG_HID_SUPPORT is not set CONFIG_USB_GADGET=y CONFIG_AB8500_USB=y diff --git a/trunk/arch/arm/mach-omap1/Makefile b/trunk/arch/arm/mach-omap1/Makefile index cd169c386161..f0e69cbc5baa 100644 --- a/trunk/arch/arm/mach-omap1/Makefile +++ b/trunk/arch/arm/mach-omap1/Makefile @@ -3,7 +3,8 @@ # # Common support -obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o +obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ + serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) diff --git a/trunk/arch/arm/mach-omap1/board-ams-delta.c b/trunk/arch/arm/mach-omap1/board-ams-delta.c index e255164ff087..a8fce3ccc707 100644 --- a/trunk/arch/arm/mach-omap1/board-ams-delta.c +++ b/trunk/arch/arm/mach-omap1/board-ams-delta.c @@ -625,7 +625,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .atag_offset = 0x100, .map_io = ams_delta_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = ams_delta_init, .init_late = ams_delta_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-fsample.c b/trunk/arch/arm/mach-omap1/board-fsample.c index 4b6de70c47a6..e067f221f0f9 100644 --- a/trunk/arch/arm/mach-omap1/board-fsample.c +++ b/trunk/arch/arm/mach-omap1/board-fsample.c @@ -27,16 +27,16 @@ #include #include -#include +#include #include #include -#include #include #include #include "iomap.h" #include "common.h" +#include "fpga.h" /* fsample is pretty close to p2-sample */ @@ -123,9 +123,9 @@ static struct resource smc91x_resources[] = { static void __init fsample_init_smc91x(void) { - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); } @@ -362,7 +362,6 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .atag_offset = 0x100, .map_io = omap_fsample_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_fsample_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-generic.c b/trunk/arch/arm/mach-omap1/board-generic.c index 4ec579fdd366..608e7d2a2778 100644 --- a/trunk/arch/arm/mach-omap1/board-generic.c +++ b/trunk/arch/arm/mach-omap1/board-generic.c @@ -81,7 +81,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_generic_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-h2-mmc.c b/trunk/arch/arm/mach-omap1/board-h2-mmc.c index e1362ce48497..7119ef28e0ad 100644 --- a/trunk/arch/arm/mach-omap1/board-h2-mmc.c +++ b/trunk/arch/arm/mach-omap1/board-h2-mmc.c @@ -13,12 +13,11 @@ */ #include #include - +#include #include -#include - #include "board-h2.h" +#include "mmc.h" #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/trunk/arch/arm/mach-omap1/board-h2.c b/trunk/arch/arm/mach-omap1/board-h2.c index 376f7f29ef77..9134b646f01b 100644 --- a/trunk/arch/arm/mach-omap1/board-h2.c +++ b/trunk/arch/arm/mach-omap1/board-h2.c @@ -39,8 +39,8 @@ #include #include -#include -#include +#include +#include #include #include #include @@ -50,6 +50,7 @@ #include "common.h" #include "board-h2.h" +#include "dma.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define OMAP1610_ETHR_START 0x04000300 @@ -458,7 +459,6 @@ MACHINE_START(OMAP_H2, "TI-H2") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = h2_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-h3-mmc.c b/trunk/arch/arm/mach-omap1/board-h3-mmc.c index c74daace8cd6..17d77914d769 100644 --- a/trunk/arch/arm/mach-omap1/board-h3-mmc.c +++ b/trunk/arch/arm/mach-omap1/board-h3-mmc.c @@ -16,9 +16,8 @@ #include -#include - #include "board-h3.h" +#include "mmc.h" #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/trunk/arch/arm/mach-omap1/board-h3.c b/trunk/arch/arm/mach-omap1/board-h3.c index ededdb7ef28c..bf213d1d8075 100644 --- a/trunk/arch/arm/mach-omap1/board-h3.c +++ b/trunk/arch/arm/mach-omap1/board-h3.c @@ -41,9 +41,9 @@ #include #include -#include +#include #include -#include +#include #include #include @@ -452,7 +452,6 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = h3_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-htcherald.c b/trunk/arch/arm/mach-omap1/board-htcherald.c index 87ab2086ef96..356f816c84a6 100644 --- a/trunk/arch/arm/mach-omap1/board-htcherald.c +++ b/trunk/arch/arm/mach-omap1/board-htcherald.c @@ -43,7 +43,7 @@ #include #include -#include +#include "mmc.h" #include #include @@ -600,7 +600,6 @@ MACHINE_START(HERALD, "HTC Herald") .atag_offset = 0x100, .map_io = htcherald_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = htcherald_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-innovator.c b/trunk/arch/arm/mach-omap1/board-innovator.c index db5f7d2976e7..f8033fab0f82 100644 --- a/trunk/arch/arm/mach-omap1/board-innovator.c +++ b/trunk/arch/arm/mach-omap1/board-innovator.c @@ -33,16 +33,15 @@ #include #include -#include -#include +#include #include -#include #include #include #include "iomap.h" #include "common.h" +#include "mmc.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define INNOVATOR1610_ETHR_START 0x04000300 @@ -215,7 +214,7 @@ static struct platform_device *innovator1510_devices[] __initdata = { static int innovator_get_pendown_state(void) { - return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); + return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); } static const struct ads7846_platform_data innovator1510_ts_info = { @@ -279,7 +278,7 @@ static struct platform_device *innovator1610_devices[] __initdata = { static void __init innovator_init_smc91x(void) { if (cpu_is_omap1510()) { - fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1, + __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1, OMAP1510_FPGA_RST); udelay(750); } else { @@ -335,10 +334,10 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { if (power_on) - fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3), + __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3), OMAP1510_FPGA_POWER); else - fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3), + __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3), OMAP1510_FPGA_POWER); return 0; @@ -390,14 +389,14 @@ static void __init innovator_init(void) omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); - reg = fpga_read(OMAP1510_FPGA_POWER); + reg = __raw_readb(OMAP1510_FPGA_POWER); reg |= OMAP1510_FPGA_PCR_COM1_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); + __raw_writeb(reg, OMAP1510_FPGA_POWER); udelay(10); - reg = fpga_read(OMAP1510_FPGA_POWER); + reg = __raw_readb(OMAP1510_FPGA_POWER); reg |= OMAP1510_FPGA_PCR_COM2_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); + __raw_writeb(reg, OMAP1510_FPGA_POWER); udelay(10); platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); @@ -437,6 +436,7 @@ static void __init innovator_init(void) */ static void __init innovator_map_io(void) { +#ifdef CONFIG_ARCH_OMAP15XX omap15xx_map_io(); iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); @@ -444,9 +444,10 @@ static void __init innovator_map_io(void) /* Dump the Innovator FPGA rev early - useful info for support. */ pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n", - fpga_read(OMAP1510_FPGA_REV_HIGH), - fpga_read(OMAP1510_FPGA_REV_LOW), - fpga_read(OMAP1510_FPGA_BOARD_REV)); + __raw_readb(OMAP1510_FPGA_REV_HIGH), + __raw_readb(OMAP1510_FPGA_REV_LOW), + __raw_readb(OMAP1510_FPGA_BOARD_REV)); +#endif } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") @@ -454,7 +455,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .atag_offset = 0x100, .map_io = innovator_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = innovator_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-nokia770.c b/trunk/arch/arm/mach-omap1/board-nokia770.c index 7d5c06d6a52a..3e8ead67e459 100644 --- a/trunk/arch/arm/mach-omap1/board-nokia770.c +++ b/trunk/arch/arm/mach-omap1/board-nokia770.c @@ -29,13 +29,13 @@ #include #include -#include -#include #include #include #include "common.h" +#include "clock.h" +#include "mmc.h" #define ADS7846_PENDOWN_GPIO 15 @@ -251,7 +251,6 @@ MACHINE_START(NOKIA770, "Nokia 770") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_nokia770_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-osk.c b/trunk/arch/arm/mach-omap1/board-osk.c index 5973945a8741..872ea47cd28a 100644 --- a/trunk/arch/arm/mach-omap1/board-osk.c +++ b/trunk/arch/arm/mach-omap1/board-osk.c @@ -48,7 +48,7 @@ #include #include -#include +#include #include #include @@ -606,7 +606,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = osk_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-palmte.c b/trunk/arch/arm/mach-omap1/board-palmte.c index 1c578d58923a..584b6fab894b 100644 --- a/trunk/arch/arm/mach-omap1/board-palmte.c +++ b/trunk/arch/arm/mach-omap1/board-palmte.c @@ -36,8 +36,8 @@ #include #include -#include -#include +#include +#include #include #include @@ -45,6 +45,7 @@ #include #include "common.h" +#include "dma.h" #define PALMTE_USBDETECT_GPIO 0 #define PALMTE_USB_OR_DC_GPIO 1 @@ -264,7 +265,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmte_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-palmtt.c b/trunk/arch/arm/mach-omap1/board-palmtt.c index 97158095083c..fbc986bfe69e 100644 --- a/trunk/arch/arm/mach-omap1/board-palmtt.c +++ b/trunk/arch/arm/mach-omap1/board-palmtt.c @@ -28,16 +28,16 @@ #include #include #include +#include #include #include #include -#include #include #include -#include -#include +#include +#include #include #include @@ -45,6 +45,7 @@ #include #include "common.h" +#include "dma.h" #define PALMTT_USBDETECT_GPIO 0 #define PALMTT_CABLE_GPIO 1 @@ -310,7 +311,6 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmtt_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-palmz71.c b/trunk/arch/arm/mach-omap1/board-palmz71.c index e311032e7eeb..60d917a93763 100644 --- a/trunk/arch/arm/mach-omap1/board-palmz71.c +++ b/trunk/arch/arm/mach-omap1/board-palmz71.c @@ -38,8 +38,8 @@ #include #include -#include -#include +#include +#include #include #include @@ -47,6 +47,7 @@ #include #include "common.h" +#include "dma.h" #define PALMZ71_USBDETECT_GPIO 0 #define PALMZ71_PENIRQ_GPIO 6 @@ -326,7 +327,6 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmz71_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-perseus2.c b/trunk/arch/arm/mach-omap1/board-perseus2.c index 198b05417bfc..9a7e483ed6fd 100644 --- a/trunk/arch/arm/mach-omap1/board-perseus2.c +++ b/trunk/arch/arm/mach-omap1/board-perseus2.c @@ -28,15 +28,15 @@ #include #include -#include +#include #include -#include #include #include #include "iomap.h" #include "common.h" +#include "fpga.h" static const unsigned int p2_keymap[] = { KEY(0, 0, KEY_UP), @@ -231,9 +231,9 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = { static void __init perseus2_init_smc91x(void) { - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); } @@ -324,7 +324,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .atag_offset = 0x100, .map_io = omap_perseus2_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_perseus2_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-sx1-mmc.c b/trunk/arch/arm/mach-omap1/board-sx1-mmc.c index 5932d56e17bf..4fcf19c78a08 100644 --- a/trunk/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/trunk/arch/arm/mach-omap1/board-sx1-mmc.c @@ -16,9 +16,10 @@ #include #include -#include #include +#include "mmc.h" + #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) static int mmc_set_power(struct device *dev, int slot, int power_on, diff --git a/trunk/arch/arm/mach-omap1/board-sx1.c b/trunk/arch/arm/mach-omap1/board-sx1.c index 13bf2cc56814..1ebc7e08d6e5 100644 --- a/trunk/arch/arm/mach-omap1/board-sx1.c +++ b/trunk/arch/arm/mach-omap1/board-sx1.c @@ -36,15 +36,16 @@ #include #include -#include +#include #include -#include +#include #include #include #include #include "common.h" +#include "dma.h" /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) @@ -403,7 +404,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_sx1_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/board-voiceblue.c b/trunk/arch/arm/mach-omap1/board-voiceblue.c index ad75e3411d46..abf705f49b19 100644 --- a/trunk/arch/arm/mach-omap1/board-voiceblue.c +++ b/trunk/arch/arm/mach-omap1/board-voiceblue.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #include #include @@ -286,7 +286,6 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = voiceblue_init, .init_late = omap1_init_late, diff --git a/trunk/arch/arm/mach-omap1/clock.c b/trunk/arch/arm/mach-omap1/clock.c index 638f4070fc70..4f5fd4a084c0 100644 --- a/trunk/arch/arm/mach-omap1/clock.c +++ b/trunk/arch/arm/mach-omap1/clock.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ #include +#include #include #include #include @@ -21,21 +22,21 @@ #include -#include -#include -#include -#include -#include - #include +#include "soc.h" #include "iomap.h" #include "clock.h" #include "opp.h" +#include "sram.h" __u32 arm_idlect1_mask; struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); +static DEFINE_SPINLOCK(clockfw_lock); + /* * Omap1 specific clock functions */ @@ -607,3 +608,497 @@ void omap1_clk_disable_unused(struct clk *clk) } #endif + + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + int ret; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return; + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->usecount == 0) { + pr_err("Trying disable clock %s with 0 usecount\n", + clk->name); + WARN_ON(1); + goto out; + } + + omap1_clk_disable(clk); + +out: + spin_unlock_irqrestore(&clockfw_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long flags; + unsigned long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = clk->rate; + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_get_rate); + +/* + * Optional clock functions defined in include/linux/clk.h + */ + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_round_rate(clk, rate); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk)) + return ret; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_set_rate(clk, rate); + if (ret == 0) + propagate_rate(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n"); + + return -EINVAL; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +/* + * OMAP specific clock functions shared between omap1 and omap2 + */ + +int __initdata mpurate; + +/* + * By default we use the rate set by the bootloader. + * You can override this with mpurate= cmdline option. + */ +static int __init omap_clk_setup(char *str) +{ + get_option(&str, &mpurate); + + if (!mpurate) + return 1; + + if (mpurate < 1000) + mpurate *= 1000000; + + return 1; +} +__setup("mpurate=", omap_clk_setup); + +/* Used for clocks that always have same value as the parent clock */ +unsigned long followparent_recalc(struct clk *clk) +{ + return clk->parent->rate; +} + +/* + * Used for clocks that have the same value as the parent clock, + * divided by some factor + */ +unsigned long omap_fixed_divisor_recalc(struct clk *clk) +{ + WARN_ON(!clk->fixed_div); + + return clk->parent->rate / clk->fixed_div; +} + +void clk_reparent(struct clk *child, struct clk *parent) +{ + list_del_init(&child->sibling); + if (parent) + list_add(&child->sibling, &parent->children); + child->parent = parent; + + /* now do the debugfs renaming to reattach the child + to the proper parent */ +} + +/* Propagate rate to children */ +void propagate_rate(struct clk *tclk) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &tclk->children, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +static LIST_HEAD(root_clks); + +/** + * recalculate_root_clocks - recalculate and propagate all root clocks + * + * Recalculates all root clocks (clocks with no parent), which if the + * clock's .recalc is set correctly, should also propagate their rates. + * Called at init. + */ +void recalculate_root_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &root_clks, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +/** + * clk_preinit - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ +void clk_preinit(struct clk *clk) +{ + INIT_LIST_HEAD(&clk->children); +} + +int clk_register(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + /* + * trap out already registered clocks + */ + if (clk->node.next || clk->node.prev) + return 0; + + mutex_lock(&clocks_mutex); + if (clk->parent) + list_add(&clk->sibling, &clk->parent->children); + else + list_add(&clk->sibling, &root_clks); + + list_add(&clk->node, &clocks); + if (clk->init) + clk->init(clk); + mutex_unlock(&clocks_mutex); + + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + list_del(&clk->sibling); + list_del(&clk->node); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_unregister); + +void clk_enable_init_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clocks, node) + if (clkp->flags & ENABLE_ON_INIT) + clk_enable(clkp); +} + +/** + * omap_clk_get_by_name - locate OMAP struct clk by its name + * @name: name of the struct clk to locate + * + * Locate an OMAP struct clk by its name. Assumes that struct clk + * names are unique. Returns NULL if not found or a pointer to the + * struct clk if found. + */ +struct clk *omap_clk_get_by_name(const char *name) +{ + struct clk *c; + struct clk *ret = NULL; + + mutex_lock(&clocks_mutex); + + list_for_each_entry(c, &clocks, node) { + if (!strcmp(c->name, name)) { + ret = c; + break; + } + } + + mutex_unlock(&clocks_mutex); + + return ret; +} + +int omap_clk_enable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->allow_idle) + c->ops->allow_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +int omap_clk_disable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->deny_idle) + c->ops->deny_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +/* + * Low level helpers + */ +static int clkll_enable_null(struct clk *clk) +{ + return 0; +} + +static void clkll_disable_null(struct clk *clk) +{ +} + +const struct clkops clkops_null = { + .enable = clkll_enable_null, + .disable = clkll_disable_null, +}; + +/* + * Dummy clock + * + * Used for clock aliases that are needed on some OMAPs, but not others + */ +struct clk dummy_ck = { + .name = "dummy", + .ops = &clkops_null, +}; + +/* + * + */ + +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + unsigned long flags; + + pr_info("clock: disabling unused clocks to save power\n"); + + spin_lock_irqsave(&clockfw_lock, flags); + list_for_each_entry(ck, &clocks, node) { + if (ck->ops == &clkops_null) + continue; + + if (ck->usecount > 0 || !ck->enable_reg) + continue; + + omap1_clk_disable_unused(ck); + } + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} +late_initcall(clk_disable_unused); +late_initcall(omap_clk_enable_autoidle_all); +#endif + +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) +/* + * debugfs support to trace clock tree hierarchy and attributes + */ + +#include +#include + +static struct dentry *clk_debugfs_root; + +static int clk_dbg_show_summary(struct seq_file *s, void *unused) +{ + struct clk *c; + struct clk *pa; + + mutex_lock(&clocks_mutex); + seq_printf(s, "%-30s %-30s %-10s %s\n", + "clock-name", "parent-name", "rate", "use-count"); + + list_for_each_entry(c, &clocks, node) { + pa = c->parent; + seq_printf(s, "%-30s %-30s %-10lu %d\n", + c->name, pa ? pa->name : "none", c->rate, + c->usecount); + } + mutex_unlock(&clocks_mutex); + + return 0; +} + +static int clk_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, clk_dbg_show_summary, inode->i_private); +} + +static const struct file_operations debug_clock_fops = { + .open = clk_dbg_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int clk_debugfs_register_one(struct clk *c) +{ + int err; + struct dentry *d; + struct clk *pa = c->parent; + + d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); + if (!d) + return -ENOMEM; + c->dent = d; + + d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); + if (!d) { + err = -ENOMEM; + goto err_out; + } + return 0; + +err_out: + debugfs_remove_recursive(c->dent); + return err; +} + +static int clk_debugfs_register(struct clk *c) +{ + int err; + struct clk *pa = c->parent; + + if (pa && !pa->dent) { + err = clk_debugfs_register(pa); + if (err) + return err; + } + + if (!c->dent) { + err = clk_debugfs_register_one(c); + if (err) + return err; + } + return 0; +} + +static int __init clk_debugfs_init(void) +{ + struct clk *c; + struct dentry *d; + int err; + + d = debugfs_create_dir("clock", NULL); + if (!d) + return -ENOMEM; + clk_debugfs_root = d; + + list_for_each_entry(c, &clocks, node) { + err = clk_debugfs_register(c); + if (err) + goto err_out; + } + + d = debugfs_create_file("summary", S_IRUGO, + d, NULL, &debug_clock_fops); + if (!d) + return -ENOMEM; + + return 0; +err_out: + debugfs_remove_recursive(clk_debugfs_root); + return err; +} +late_initcall(clk_debugfs_init); + +#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ diff --git a/trunk/arch/arm/mach-omap1/clock.h b/trunk/arch/arm/mach-omap1/clock.h index 3d04f4f67676..1e4918a3a5ee 100644 --- a/trunk/arch/arm/mach-omap1/clock.h +++ b/trunk/arch/arm/mach-omap1/clock.h @@ -14,8 +14,184 @@ #define __ARCH_ARM_MACH_OMAP1_CLOCK_H #include +#include -#include +#include + +struct module; +struct clk; + +struct omap_clk { + u16 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +/* Platform flags for the clkdev-OMAP integration code */ +#define CK_310 (1 << 0) +#define CK_7XX (1 << 1) /* 7xx, 850 */ +#define CK_1510 (1 << 2) +#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ +#define CK_1710 (1 << 4) /* 1710 extra for rate selection */ + + +/* Temporary, needed during the common clock framework conversion */ +#define __clk_get_name(clk) (clk->name) +#define __clk_get_parent(clk) (clk->parent) +#define __clk_get_rate(clk) (clk->rate) + +/** + * struct clkops - some clock function pointers + * @enable: fn ptr that enables the current clock in hardware + * @disable: fn ptr that enables the current clock in hardware + * @find_idlest: function returning the IDLEST register for the clock's IP blk + * @find_companion: function returning the "companion" clk reg for the clock + * @allow_idle: fn ptr that enables autoidle for the current clock in hardware + * @deny_idle: fn ptr that disables autoidle for the current clock in hardware + * + * A "companion" clk is an accompanying clock to the one being queried + * that must be enabled for the IP module connected to the clock to + * become accessible by the hardware. Neither @find_idlest nor + * @find_companion should be needed; that information is IP + * block-specific; the hwmod code has been created to handle this, but + * until hwmod data is ready and drivers have been converted to use PM + * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and + * @find_companion must, unfortunately, remain. + */ +struct clkops { + int (*enable)(struct clk *); + void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, + u8 *, u8 *); + void (*find_companion)(struct clk *, void __iomem **, + u8 *); + void (*allow_idle)(struct clk *); + void (*deny_idle)(struct clk *); +}; + +/* + * struct clk.flags possibilities + * + * XXX document the rest of the clock flags here + * + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) + +/** + * struct clk - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @ops: struct clkops * for this clock + * @name: the name of the clock in the hardware (used in hwmod data and debug) + * @parent: pointer to this clock's parent struct clk + * @children: list_head connecting to the child clks' @sibling list_heads + * @sibling: list_head connecting this clk to its parent clk's @children + * @rate: current clock rate + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @recalc: fn ptr that returns the clock's current rate + * @set_rate: fn ptr that can change the clock's current rate + * @round_rate: fn ptr that can round the clock's current rate + * @init: fn ptr to do clock-specific initialization + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @usecount: number of users that have requested this clock to be enabled + * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div + * @flags: see "struct clk.flags possibilities" above + * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) + * @src_offset: bitshift for source selection bitfield (OMAP1 only) + * + * XXX @rate_offset, @src_offset should probably be removed and OMAP1 + * clock code converted to use clksel. + * + * XXX @usecount is poorly named. It should be "enable_count" or + * something similar. "users" in the description refers to kernel + * code (core code or drivers) that have called clk_enable() and not + * yet called clk_disable(); the usecount of parent clocks is also + * incremented by the clock code when clk_enable() is called on child + * clocks and decremented by the clock code when clk_disable() is + * called on child clocks. + * + * XXX @clkdm, @usecount, @children, @sibling should be marked for + * internal use only. + * + * @children and @sibling are used to optimize parent-to-child clock + * tree traversals. (child-to-parent traversals use @parent.) + * + * XXX The notion of the clock's current rate probably needs to be + * separated from the clock's target rate. + */ +struct clk { + struct list_head node; + const struct clkops *ops; + const char *name; + struct clk *parent; + struct list_head children; + struct list_head sibling; /* node for children */ + unsigned long rate; + void __iomem *enable_reg; + unsigned long (*recalc)(struct clk *); + int (*set_rate)(struct clk *, unsigned long); + long (*round_rate)(struct clk *, unsigned long); + void (*init)(struct clk *); + u8 enable_bit; + s8 usecount; + u8 fixed_div; + u8 flags; + u8 rate_offset; + u8 src_offset; +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) + struct dentry *dent; /* For visible tree hierarchy */ +#endif +}; + +struct clk_functions { + int (*clk_enable)(struct clk *clk); + void (*clk_disable)(struct clk *clk); + long (*clk_round_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_parent)(struct clk *clk, struct clk *parent); + void (*clk_allow_idle)(struct clk *clk); + void (*clk_deny_idle)(struct clk *clk); + void (*clk_disable_unused)(struct clk *clk); +}; + +extern int mpurate; + +extern int clk_init(struct clk_functions *custom_clocks); +extern void clk_preinit(struct clk *clk); +extern int clk_register(struct clk *clk); +extern void clk_reparent(struct clk *child, struct clk *parent); +extern void clk_unregister(struct clk *clk); +extern void propagate_rate(struct clk *clk); +extern void recalculate_root_clocks(void); +extern unsigned long followparent_recalc(struct clk *clk); +extern void clk_enable_init_clocks(void); +unsigned long omap_fixed_divisor_recalc(struct clk *clk); +extern struct clk *omap_clk_get_by_name(const char *name); +extern int omap_clk_enable_autoidle_all(void); +extern int omap_clk_disable_autoidle_all(void); + +extern const struct clkops clkops_null; + +extern struct clk dummy_ck; int omap1_clk_init(void); void omap1_clk_late_init(void); diff --git a/trunk/arch/arm/mach-omap1/clock_data.c b/trunk/arch/arm/mach-omap1/clock_data.c index 9b45f4b0ee22..cb7c6ae2e3fc 100644 --- a/trunk/arch/arm/mach-omap1/clock_data.c +++ b/trunk/arch/arm/mach-omap1/clock_data.c @@ -22,16 +22,14 @@ #include /* for machine_is_* */ -#include -#include -#include -#include /* for omap_sram_reprogram_clock() */ +#include "soc.h" #include #include /* for OTG_BASE */ #include "iomap.h" #include "clock.h" +#include "sram.h" /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ #define IDL_CLKOUT_ARM_SHIFT 12 @@ -765,14 +763,6 @@ static struct omap_clk omap_clks[] = { * init */ -static struct clk_functions omap1_clk_functions = { - .clk_enable = omap1_clk_enable, - .clk_disable = omap1_clk_disable, - .clk_round_rate = omap1_clk_round_rate, - .clk_set_rate = omap1_clk_set_rate, - .clk_disable_unused = omap1_clk_disable_unused, -}; - static void __init omap1_show_rates(void) { pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", @@ -803,8 +793,6 @@ int __init omap1_clk_init(void) if (!cpu_is_omap15xx()) omap_writew(0, SOFT_REQ_REG2); - clk_init(&omap1_clk_functions); - /* By default all idlect1 clocks are allowed to idle */ arm_idlect1_mask = ~0; diff --git a/trunk/arch/arm/mach-omap1/common.h b/trunk/arch/arm/mach-omap1/common.h index c2552b24f9f2..b53e0854422f 100644 --- a/trunk/arch/arm/mach-omap1/common.h +++ b/trunk/arch/arm/mach-omap1/common.h @@ -26,8 +26,10 @@ #ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H #define __ARCH_ARM_MACH_OMAP1_COMMON_H -#include #include +#include + +#include #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); @@ -38,6 +40,7 @@ static inline void omap7xx_map_io(void) #endif #ifdef CONFIG_ARCH_OMAP15XX +void omap1510_fpga_init_irq(void); void omap15xx_map_io(void); #else static inline void omap15xx_map_io(void) @@ -90,4 +93,6 @@ extern int ocpi_enable(void); static inline int ocpi_enable(void) { return 0; } #endif +extern u32 omap1_get_reset_sources(void); + #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */ diff --git a/trunk/arch/arm/mach-omap1/devices.c b/trunk/arch/arm/mach-omap1/devices.c index d3fec92c54cb..0af635205e8a 100644 --- a/trunk/arch/arm/mach-omap1/devices.c +++ b/trunk/arch/arm/mach-omap1/devices.c @@ -17,12 +17,12 @@ #include #include +#include + #include -#include +#include #include -#include -#include #include #include @@ -30,6 +30,9 @@ #include "common.h" #include "clock.h" +#include "dma.h" +#include "mmc.h" +#include "sram.h" #if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) @@ -175,6 +178,13 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base, res[3].name = "tx"; res[3].flags = IORESOURCE_DMA; + if (cpu_is_omap7xx()) + data->slots[0].features = MMC_OMAP7XX; + if (cpu_is_omap15xx()) + data->slots[0].features = MMC_OMAP15XX; + if (cpu_is_omap16xx()) + data->slots[0].features = MMC_OMAP16XX; + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); if (ret == 0) ret = platform_device_add_data(pdev, data, sizeof(*data)); @@ -439,18 +449,31 @@ static struct resource wdt_resources[] = { }; static struct platform_device omap_wdt_device = { - .name = "omap_wdt", - .id = -1, + .name = "omap_wdt", + .id = -1, .num_resources = ARRAY_SIZE(wdt_resources), .resource = wdt_resources, }; static int __init omap_init_wdt(void) { + struct omap_wd_timer_platform_data pdata; + int ret; + if (!cpu_is_omap16xx()) return -ENODEV; - return platform_device_register(&omap_wdt_device); + pdata.read_reset_sources = omap1_get_reset_sources; + + ret = platform_device_register(&omap_wdt_device); + if (!ret) { + ret = platform_device_add_data(&omap_wdt_device, &pdata, + sizeof(pdata)); + if (ret) + platform_device_del(&omap_wdt_device); + } + + return ret; } subsys_initcall(omap_init_wdt); #endif diff --git a/trunk/arch/arm/mach-omap1/dma.c b/trunk/arch/arm/mach-omap1/dma.c index 29007fef84cd..978aed85d328 100644 --- a/trunk/arch/arm/mach-omap1/dma.c +++ b/trunk/arch/arm/mach-omap1/dma.c @@ -25,11 +25,13 @@ #include #include -#include -#include +#include +#include #include +#include "dma.h" + #define OMAP1_DMA_BASE (0xfffed800) #define OMAP1_LOGICAL_DMA_CH_COUNT 17 #define OMAP1_DMA_STRIDE 0x40 @@ -319,6 +321,9 @@ static int __init omap1_system_dma_init(void) d->dev_caps = ENABLE_1510_MODE; enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; + if (cpu_is_omap16xx()) + d->dev_caps = ENABLE_16XX_MODE; + d->dev_caps |= SRC_PORT; d->dev_caps |= DST_PORT; d->dev_caps |= SRC_INDEX; diff --git a/trunk/arch/arm/mach-omap1/dma.h b/trunk/arch/arm/mach-omap1/dma.h new file mode 100644 index 000000000000..da6345dab03f --- /dev/null +++ b/trunk/arch/arm/mach-omap1/dma.h @@ -0,0 +1,83 @@ +/* + * OMAP1 DMA channel definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __OMAP1_DMA_CHANNEL_H +#define __OMAP1_DMA_CHANNEL_H + +/* DMA channels for omap1 */ +#define OMAP_DMA_NO_DEVICE 0 +#define OMAP_DMA_MCSI1_TX 1 +#define OMAP_DMA_MCSI1_RX 2 +#define OMAP_DMA_I2C_RX 3 +#define OMAP_DMA_I2C_TX 4 +#define OMAP_DMA_EXT_NDMA_REQ 5 +#define OMAP_DMA_EXT_NDMA_REQ2 6 +#define OMAP_DMA_UWIRE_TX 7 +#define OMAP_DMA_MCBSP1_TX 8 +#define OMAP_DMA_MCBSP1_RX 9 +#define OMAP_DMA_MCBSP3_TX 10 +#define OMAP_DMA_MCBSP3_RX 11 +#define OMAP_DMA_UART1_TX 12 +#define OMAP_DMA_UART1_RX 13 +#define OMAP_DMA_UART2_TX 14 +#define OMAP_DMA_UART2_RX 15 +#define OMAP_DMA_MCBSP2_TX 16 +#define OMAP_DMA_MCBSP2_RX 17 +#define OMAP_DMA_UART3_TX 18 +#define OMAP_DMA_UART3_RX 19 +#define OMAP_DMA_CAMERA_IF_RX 20 +#define OMAP_DMA_MMC_TX 21 +#define OMAP_DMA_MMC_RX 22 +#define OMAP_DMA_NAND 23 +#define OMAP_DMA_IRQ_LCD_LINE 24 +#define OMAP_DMA_MEMORY_STICK 25 +#define OMAP_DMA_USB_W2FC_RX0 26 +#define OMAP_DMA_USB_W2FC_RX1 27 +#define OMAP_DMA_USB_W2FC_RX2 28 +#define OMAP_DMA_USB_W2FC_TX0 29 +#define OMAP_DMA_USB_W2FC_TX1 30 +#define OMAP_DMA_USB_W2FC_TX2 31 + +/* These are only for 1610 */ +#define OMAP_DMA_CRYPTO_DES_IN 32 +#define OMAP_DMA_SPI_TX 33 +#define OMAP_DMA_SPI_RX 34 +#define OMAP_DMA_CRYPTO_HASH 35 +#define OMAP_DMA_CCP_ATTN 36 +#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 +#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 +#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 +#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 +#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 +#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 +#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 +#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 +#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 +#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 +#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 +#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 +#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 +#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 +#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 +#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 +#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 +#define OMAP_DMA_MMC2_TX 54 +#define OMAP_DMA_MMC2_RX 55 +#define OMAP_DMA_CRYPTO_DES_OUT 56 + +#endif /* __OMAP1_DMA_CHANNEL_H */ diff --git a/trunk/arch/arm/mach-omap1/flash.c b/trunk/arch/arm/mach-omap1/flash.c index 73ae6169aa4a..b3fb531af94e 100644 --- a/trunk/arch/arm/mach-omap1/flash.c +++ b/trunk/arch/arm/mach-omap1/flash.c @@ -10,7 +10,7 @@ #include #include -#include +#include #include #include diff --git a/trunk/arch/arm/mach-omap1/fpga.c b/trunk/arch/arm/mach-omap1/fpga.c index 29ec50fc688d..8bd71b2d0967 100644 --- a/trunk/arch/arm/mach-omap1/fpga.c +++ b/trunk/arch/arm/mach-omap1/fpga.c @@ -27,11 +27,11 @@ #include #include -#include - #include #include "iomap.h" +#include "common.h" +#include "fpga.h" static void fpga_mask_irq(struct irq_data *d) { diff --git a/trunk/arch/arm/mach-omap1/fpga.h b/trunk/arch/arm/mach-omap1/fpga.h new file mode 100644 index 000000000000..4b4307a80e48 --- /dev/null +++ b/trunk/arch/arm/mach-omap1/fpga.h @@ -0,0 +1,52 @@ +/* + * Interrupt handler for OMAP-1510 FPGA + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: Greg Lonnon + * + * Copyright (C) 2002 MontaVista Software, Inc. + * + * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 + * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_FPGA_H +#define __ASM_ARCH_OMAP_FPGA_H + +/* + * --------------------------------------------------------------------------- + * H2/P2 Debug board FPGA + * --------------------------------------------------------------------------- + */ +/* maps in the FPGA registers and the ETHR registers */ +#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ +#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ +#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ + +#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) +#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ +#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ +#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ +#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ +#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ +#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ +#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ + +/* LEDs definition on debug board (16 LEDs, all physically green) */ +#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) +#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) +#define H2P2_DBG_FPGA_LED_RED (1 << 13) +#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) +/* cpu0 load-meter LEDs */ +#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... +#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 +#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) + +#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) +#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) + +#endif diff --git a/trunk/arch/arm/mach-omap1/gpio15xx.c b/trunk/arch/arm/mach-omap1/gpio15xx.c index 98e6f39224a4..02b3eb2e201c 100644 --- a/trunk/arch/arm/mach-omap1/gpio15xx.c +++ b/trunk/arch/arm/mach-omap1/gpio15xx.c @@ -19,6 +19,8 @@ #include #include +#include + #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE #define OMAP1510_GPIO_BASE 0xFFFCE000 diff --git a/trunk/arch/arm/mach-omap1/gpio16xx.c b/trunk/arch/arm/mach-omap1/gpio16xx.c index 33f419236b17..b9952a258d82 100644 --- a/trunk/arch/arm/mach-omap1/gpio16xx.c +++ b/trunk/arch/arm/mach-omap1/gpio16xx.c @@ -19,6 +19,8 @@ #include #include +#include + #define OMAP1610_GPIO1_BASE 0xfffbe400 #define OMAP1610_GPIO2_BASE 0xfffbec00 #define OMAP1610_GPIO3_BASE 0xfffbb400 diff --git a/trunk/arch/arm/mach-omap1/gpio7xx.c b/trunk/arch/arm/mach-omap1/gpio7xx.c index 958ce9acee95..f5819b2b7cbe 100644 --- a/trunk/arch/arm/mach-omap1/gpio7xx.c +++ b/trunk/arch/arm/mach-omap1/gpio7xx.c @@ -19,6 +19,8 @@ #include #include +#include + #define OMAP7XX_GPIO1_BASE 0xfffbc000 #define OMAP7XX_GPIO2_BASE 0xfffbc800 #define OMAP7XX_GPIO3_BASE 0xfffbd000 diff --git a/trunk/arch/arm/mach-omap1/i2c.c b/trunk/arch/arm/mach-omap1/i2c.c index a0551a6d7451..faca808cb3d9 100644 --- a/trunk/arch/arm/mach-omap1/i2c.c +++ b/trunk/arch/arm/mach-omap1/i2c.c @@ -19,11 +19,25 @@ * */ -#include +#include #include -#include +#include "soc.h" + +#include + +#define OMAP_I2C_SIZE 0x3f +#define OMAP1_I2C_BASE 0xfffb3800 +#define OMAP1_INT_I2C (32 + 4) + +static const char name[] = "omap_i2c"; -void __init omap1_i2c_mux_pins(int bus_id) +static struct resource i2c_resources[2] = { +}; + +static struct platform_device omap_i2c_devices[1] = { +}; + +static void __init omap1_i2c_mux_pins(int bus_id) { if (cpu_is_omap7xx()) { omap_cfg_reg(I2C_7XX_SDA); @@ -33,3 +47,47 @@ void __init omap1_i2c_mux_pins(int bus_id) omap_cfg_reg(I2C_SCL); } } + +int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, + int bus_id) +{ + struct platform_device *pdev; + struct resource *res; + + if (bus_id > 1) + return -EINVAL; + + omap1_i2c_mux_pins(bus_id); + + pdev = &omap_i2c_devices[bus_id - 1]; + pdev->id = bus_id; + pdev->name = name; + pdev->num_resources = ARRAY_SIZE(i2c_resources); + res = i2c_resources; + res[0].start = OMAP1_I2C_BASE; + res[0].end = res[0].start + OMAP_I2C_SIZE; + res[0].flags = IORESOURCE_MEM; + res[1].start = OMAP1_INT_I2C; + res[1].flags = IORESOURCE_IRQ; + pdev->resource = res; + + /* all OMAP1 have IP version 1 register set */ + pdata->rev = OMAP_I2C_IP_VERSION_1; + + /* all OMAP1 I2C are implemented like this */ + pdata->flags = OMAP_I2C_FLAG_NO_FIFO | + OMAP_I2C_FLAG_SIMPLE_CLOCK | + OMAP_I2C_FLAG_16BIT_DATA_REG | + OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK; + + /* how the cpu bus is wired up differs for 7xx only */ + + if (cpu_is_omap7xx()) + pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1; + else + pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2; + + pdev->dev.platform_data = pdata; + + return platform_device_register(pdev); +} diff --git a/trunk/arch/arm/mach-omap1/id.c b/trunk/arch/arm/mach-omap1/id.c index a1b846aacdaf..52de382fc804 100644 --- a/trunk/arch/arm/mach-omap1/id.c +++ b/trunk/arch/arm/mach-omap1/id.c @@ -17,7 +17,7 @@ #include #include -#include +#include "soc.h" #include diff --git a/trunk/arch/arm/mach-omap1/include/mach/debug-macro.S b/trunk/arch/arm/mach-omap1/include/mach/debug-macro.S index 2b36a281dc84..5c1a26c9f490 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/trunk/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include -#include +#include "serial.h" .pushsection .data omap_uart_phys: .word 0x0 diff --git a/trunk/arch/arm/mach-omap1/include/mach/entry-macro.S b/trunk/arch/arm/mach-omap1/include/mach/entry-macro.S index 88f08cab1717..78a8c6c24764 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/trunk/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -13,8 +13,6 @@ #include #include -#include "../../iomap.h" - .macro get_irqnr_preamble, base, tmp .endm diff --git a/trunk/arch/arm/mach-omap1/include/mach/gpio.h b/trunk/arch/arm/mach-omap1/include/mach/gpio.h deleted file mode 100644 index ebf86c0f4f46..000000000000 --- a/trunk/arch/arm/mach-omap1/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/gpio.h - */ diff --git a/trunk/arch/arm/mach-omap1/include/mach/hardware.h b/trunk/arch/arm/mach-omap1/include/mach/hardware.h index 84248d250adb..5875a5098d35 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/hardware.h +++ b/trunk/arch/arm/mach-omap1/include/mach/hardware.h @@ -39,7 +39,7 @@ #include #ifndef __ASSEMBLER__ #include -#include +#include /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these @@ -51,7 +51,7 @@ extern void omap_writeb(u8 v, u32 pa); extern void omap_writew(u16 v, u32 pa); extern void omap_writel(u32 v, u32 pa); -#include +#include /* Almost all documentation for chip and board memory maps assumes * BM is clear. Most devel boards have a switch to control booting @@ -72,7 +72,10 @@ static inline u32 omap_cs3_phys(void) #endif /* ifndef __ASSEMBLER__ */ -#include +#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) + +#include /* * --------------------------------------------------------------------------- diff --git a/trunk/arch/arm/mach-omap1/include/mach/memory.h b/trunk/arch/arm/mach-omap1/include/mach/memory.h index 901082def9bd..3c2530523111 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/memory.h +++ b/trunk/arch/arm/mach-omap1/include/mach/memory.h @@ -19,7 +19,7 @@ * because of the strncmp(). */ #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__) -#include +#include /* * OMAP-1510 Local Bus address offset diff --git a/trunk/arch/arm/mach-omap1/include/mach/omap1510.h b/trunk/arch/arm/mach-omap1/include/mach/omap1510.h index 8fe05d6137c0..3d235244bf5c 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/omap1510.h +++ b/trunk/arch/arm/mach-omap1/include/mach/omap1510.h @@ -45,5 +45,118 @@ #define OMAP1510_DSP_MMU_BASE (0xfffed200) +/* + * --------------------------------------------------------------------------- + * OMAP-1510 FPGA + * --------------------------------------------------------------------------- + */ +#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */ +#define OMAP1510_FPGA_SIZE SZ_4K +#define OMAP1510_FPGA_START 0x08000000 /* PA */ + +/* Revision */ +#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0) +#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1) +#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2) +#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3) +#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4) +#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5) + +/* Interrupt status */ +#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6) +#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7) + +/* Interrupt mask */ +#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8) +#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9) + +/* Reset registers */ +#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa) +#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb) + +#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc) +#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe) +#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf) +#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14) +#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15) +#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16) +#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18) +#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c) +#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100) +#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101) +#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102) + +#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204) + +#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205) +#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206) +#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207) +#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208) +#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209) +#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a) +#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b) +#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d) +#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e) +#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210) + +#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) + +/* + * Power up Giga UART driver, turn on HID clock. + * Turn off BT power, since we're not using it and it + * draws power. + */ +#define OMAP1510_FPGA_RESET_VALUE 0x42 + +#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) +#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) +#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) +#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) +#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) +#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) +#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) +#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) + +/* + * Innovator/OMAP1510 FPGA HID register bit definitions + */ +#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ +#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ +#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ +#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ +#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ +#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ +#define OMAP1510_FPGA_HID_rsrvd (1<<6) +#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ + +/* The FPGA IRQ is cascaded through GPIO_13 */ +#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) + +/* IRQ Numbers for interrupts muxed through the FPGA */ +#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) +#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) +#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) +#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) +#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) +#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) +#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) +#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) +#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) +#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) +#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) +#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) +#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) +#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) +#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) +#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) +#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) +#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) +#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) +#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) +#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) +#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) +#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) +#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) + #endif /* __ASM_ARCH_OMAP15XX_H */ diff --git a/trunk/arch/arm/mach-omap1/include/mach/serial.h b/trunk/arch/arm/mach-omap1/include/mach/serial.h new file mode 100644 index 000000000000..2ce6a2db470b --- /dev/null +++ b/trunk/arch/arm/mach-omap1/include/mach/serial.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support- Santosh Shilimkar + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_SERIAL_H +#define __ASM_ARCH_SERIAL_H + +#include + +/* + * Memory entry used for the DEBUG_LL UART configuration, relative to + * start of RAM. See also uncompress.h and debug-macro.S. + * + * Note that using a memory location for storing the UART configuration + * has at least two limitations: + * + * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the + * uncompress code could then partially overwrite itself + * 2. We assume printascii is called at least once before paging_init, + * and addruart has a chance to read OMAP_UART_INFO + */ +#define OMAP_UART_INFO_OFS 0x3ffc + +/* OMAP1 serial ports */ +#define OMAP1_UART1_BASE 0xfffb0000 +#define OMAP1_UART2_BASE 0xfffb0800 +#define OMAP1_UART3_BASE 0xfffb9800 + +#define OMAP_PORT_SHIFT 2 +#define OMAP7XX_PORT_SHIFT 0 + +#define OMAP1510_BASE_BAUD (12000000/16) +#define OMAP16XX_BASE_BAUD (48000000/16) + +/* + * DEBUG_LL port encoding stored into the UART1 scratchpad register by + * decomp_setup in uncompress.h + */ +#define OMAP1UART1 11 +#define OMAP1UART2 12 +#define OMAP1UART3 13 + +#ifndef __ASSEMBLER__ +extern void omap_serial_init(void); +#endif + +#endif diff --git a/trunk/arch/arm/mach-omap1/include/mach/soc.h b/trunk/arch/arm/mach-omap1/include/mach/soc.h new file mode 100644 index 000000000000..6cf9c1cc2bef --- /dev/null +++ b/trunk/arch/arm/mach-omap1/include/mach/soc.h @@ -0,0 +1,229 @@ +/* + * OMAP cpu type detection + * + * Copyright (C) 2004, 2008 Nokia Corporation + * + * Copyright (C) 2009-11 Texas Instruments. + * + * Written by Tony Lindgren + * + * Added OMAP4/5 specific defines - Santosh Shilimkar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_CPU_H +#define __ASM_ARCH_OMAP_CPU_H + +#ifndef __ASSEMBLY__ + +#include + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP1 +#undef OMAP_NAME + +#ifdef CONFIG_ARCH_OMAP730 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap730 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP850 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap850 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP15XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap1510 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP16XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap16xx +# endif +#endif + +/* + * omap_rev bits: + * CPU id bits (0730, 1510, 1710, 2422...) [31:16] + * CPU revision (See _REV_ defined in cpu.h) [15:08] + * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + */ +unsigned int omap_rev(void); + +/* + * Get the CPU revision for OMAP devices + */ +#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) + +/* + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap7xx(): True for OMAP730, OMAP850 + * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 + * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 + */ +#define GET_OMAP_CLASS (omap_rev() & 0xff) + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_CLASS(7xx, 0x07) +IS_OMAP_CLASS(15xx, 0x15) +IS_OMAP_CLASS(16xx, 0x16) + +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 + +#if defined(MULTI_OMAP1) +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() is_omap15xx() +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() is_omap16xx() +# endif +#else +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() 1 +# endif +#endif + +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap310(): True for OMAP310 + * cpu_is_omap1510(): True for OMAP1510 + * cpu_is_omap1610(): True for OMAP1610 + * cpu_is_omap1611(): True for OMAP1611 + * cpu_is_omap5912(): True for OMAP5912 + * cpu_is_omap1621(): True for OMAP1621 + * cpu_is_omap1710(): True for OMAP1710 + */ +#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(310, 0x0310) +IS_OMAP_TYPE(1510, 0x1510) +IS_OMAP_TYPE(1610, 0x1610) +IS_OMAP_TYPE(1611, 0x1611) +IS_OMAP_TYPE(5912, 0x1611) +IS_OMAP_TYPE(1621, 0x1621) +IS_OMAP_TYPE(1710, 0x1710) + +#define cpu_is_omap310() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap5912() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 + +/* These are needed to compile common code */ +#ifdef CONFIG_ARCH_OMAP1 +#define cpu_is_omap242x() 0 +#define cpu_is_omap2430() 0 +#define cpu_is_omap243x() 0 +#define cpu_is_omap24xx() 0 +#define cpu_is_omap34xx() 0 +#define cpu_is_omap44xx() 0 +#define soc_is_omap54xx() 0 +#define soc_is_am33xx() 0 +#define cpu_class_is_omap1() 1 +#define cpu_class_is_omap2() 0 +#endif + +/* + * Whether we have MULTI_OMAP1 or not, we still need to distinguish + * between 310 vs. 1510 and 1611B/5912 vs. 1710. + */ + +#if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap310 +# undef cpu_is_omap1510 +# define cpu_is_omap310() is_omap310() +# define cpu_is_omap1510() is_omap1510() +#endif + +#if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap1610 +# undef cpu_is_omap1611 +# undef cpu_is_omap5912 +# undef cpu_is_omap1621 +# undef cpu_is_omap1710 +# define cpu_is_omap1610() is_omap1610() +# define cpu_is_omap1611() is_omap1611() +# define cpu_is_omap5912() is_omap5912() +# define cpu_is_omap1621() is_omap1621() +# define cpu_is_omap1710() is_omap1710() +#endif + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/trunk/arch/arm/plat-omap/include/plat/tc.h b/trunk/arch/arm/mach-omap1/include/mach/tc.h similarity index 100% rename from trunk/arch/arm/plat-omap/include/plat/tc.h rename to trunk/arch/arm/mach-omap1/include/mach/tc.h diff --git a/trunk/arch/arm/mach-omap1/include/mach/uncompress.h b/trunk/arch/arm/mach-omap1/include/mach/uncompress.h index 0ff22dc075c7..ad6fbe7d83f2 100644 --- a/trunk/arch/arm/mach-omap1/include/mach/uncompress.h +++ b/trunk/arch/arm/mach-omap1/include/mach/uncompress.h @@ -1,5 +1,122 @@ /* - * arch/arm/mach-omap1/include/mach/uncompress.h + * arch/arm/plat-omap/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Initially based on: + * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon + * + * Rewritten by: + * Author: + * 2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. */ -#include +#include +#include + +#include +#include + +#include "serial.h" + +#define MDR1_MODE_MASK 0x07 + +volatile u8 *uart_base; +int uart_shift; + +/* + * Store the DEBUG_LL uart number into memory. + * See also debug-macro.S, and serial.c for related code. + */ +static void set_omap_uart_info(unsigned char port) +{ + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart_shift & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); + *uart_info = port; +} + +static void putc(int c) +{ + if (!uart_base) + return; + + /* Check for UART 16x mode */ + if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) + return; + + while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) + barrier(); + uart_base[UART_TX << uart_shift] = c; +} + +static inline void flush(void) +{ +} + +/* + * Macros to configure UART1 and debug UART + */ +#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ + if (machine_is_##mach()) { \ + uart_base = (volatile u8 *)(dbg_uart); \ + uart_shift = (dbg_shft); \ + port = (dbg_id); \ + set_omap_uart_info(port); \ + break; \ + } + +#define DEBUG_LL_OMAP7XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ + OMAP1UART##p) + +#define DEBUG_LL_OMAP1(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP1UART##p) + +static inline void arch_decomp_setup(void) +{ + int port = 0; + + /* + * Initialize the port based on the machine ID from the bootloader. + * Note that we're using macros here instead of switch statement + * as machine_is functions are optimized out for the boards that + * are not selected. + */ + do { + /* omap7xx/8xx based boards using UART1 with shift 0 */ + DEBUG_LL_OMAP7XX(1, herald); + DEBUG_LL_OMAP7XX(1, omap_perseus2); + + /* omap15xx/16xx based boards using UART1 */ + DEBUG_LL_OMAP1(1, ams_delta); + DEBUG_LL_OMAP1(1, nokia770); + DEBUG_LL_OMAP1(1, omap_h2); + DEBUG_LL_OMAP1(1, omap_h3); + DEBUG_LL_OMAP1(1, omap_innovator); + DEBUG_LL_OMAP1(1, omap_osk); + DEBUG_LL_OMAP1(1, omap_palmte); + DEBUG_LL_OMAP1(1, omap_palmz71); + + /* omap15xx/16xx based boards using UART2 */ + DEBUG_LL_OMAP1(2, omap_palmtt); + + /* omap15xx/16xx based boards using UART3 */ + DEBUG_LL_OMAP1(3, sx1); + } while (0); +} + +/* + * nothing to do + */ +#define arch_decomp_wdog() diff --git a/trunk/arch/arm/mach-omap1/io.c b/trunk/arch/arm/mach-omap1/io.c index 6a5baab1f4cb..5a3b80617a11 100644 --- a/trunk/arch/arm/mach-omap1/io.c +++ b/trunk/arch/arm/mach-omap1/io.c @@ -17,8 +17,8 @@ #include #include -#include -#include +#include +#include #include "iomap.h" #include "common.h" @@ -134,7 +134,6 @@ void __init omap1_init_early(void) */ omap1_clk_init(); omap1_mux_init(); - omap_init_consistent_dma_size(); } void __init omap1_init_late(void) diff --git a/trunk/arch/arm/mach-omap1/iomap.h b/trunk/arch/arm/mach-omap1/iomap.h index 330c4716b028..f4e2d7a21365 100644 --- a/trunk/arch/arm/mach-omap1/iomap.h +++ b/trunk/arch/arm/mach-omap1/iomap.h @@ -22,9 +22,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) - /* * ---------------------------------------------------------------------------- * Omap1 specific IO mapping diff --git a/trunk/arch/arm/mach-omap1/irq.c b/trunk/arch/arm/mach-omap1/irq.c index 6995fb6a3345..122ef67939a2 100644 --- a/trunk/arch/arm/mach-omap1/irq.c +++ b/trunk/arch/arm/mach-omap1/irq.c @@ -45,7 +45,7 @@ #include #include -#include +#include "soc.h" #include diff --git a/trunk/arch/arm/mach-omap1/lcd_dma.c b/trunk/arch/arm/mach-omap1/lcd_dma.c index ed42628611bc..7ed8c1857d56 100644 --- a/trunk/arch/arm/mach-omap1/lcd_dma.c +++ b/trunk/arch/arm/mach-omap1/lcd_dma.c @@ -27,11 +27,13 @@ #include #include -#include +#include #include #include +#include "dma.h" + int omap_lcd_dma_running(void) { /* diff --git a/trunk/arch/arm/mach-omap1/mcbsp.c b/trunk/arch/arm/mach-omap1/mcbsp.c index bdc2e7541adb..c6d8fdf92e9c 100644 --- a/trunk/arch/arm/mach-omap1/mcbsp.c +++ b/trunk/arch/arm/mach-omap1/mcbsp.c @@ -19,14 +19,15 @@ #include #include -#include +#include #include -#include +#include "soc.h" #include #include #include "iomap.h" +#include "dma.h" #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) diff --git a/trunk/arch/arm/mach-omap1/mmc.h b/trunk/arch/arm/mach-omap1/mmc.h new file mode 100644 index 000000000000..39c2b13de884 --- /dev/null +++ b/trunk/arch/arm/mach-omap1/mmc.h @@ -0,0 +1,18 @@ +#include +#include + +#define OMAP15XX_NR_MMC 1 +#define OMAP16XX_NR_MMC 2 +#define OMAP1_MMC_SIZE 0x080 +#define OMAP1_MMC1_BASE 0xfffb7800 +#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers); +#else +static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers) +{ +} +#endif diff --git a/trunk/arch/arm/mach-omap1/opp_data.c b/trunk/arch/arm/mach-omap1/opp_data.c index 9cd4ddb51397..8dcebe6d8882 100644 --- a/trunk/arch/arm/mach-omap1/opp_data.c +++ b/trunk/arch/arm/mach-omap1/opp_data.c @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ -#include +#include "clock.h" #include "opp.h" /*------------------------------------------------------------------------- diff --git a/trunk/arch/arm/mach-omap1/pm.c b/trunk/arch/arm/mach-omap1/pm.c index 47ec16155483..66d663a6ef3a 100644 --- a/trunk/arch/arm/mach-omap1/pm.c +++ b/trunk/arch/arm/mach-omap1/pm.c @@ -44,23 +44,23 @@ #include #include +#include #include #include #include #include -#include -#include -#include -#include +#include #include -#include +#include #include #include #include "iomap.h" +#include "clock.h" #include "pm.h" +#include "sram.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; diff --git a/trunk/arch/arm/mach-omap1/pm_bus.c b/trunk/arch/arm/mach-omap1/pm_bus.c index 7868e75ad077..3f2d39672393 100644 --- a/trunk/arch/arm/mach-omap1/pm_bus.c +++ b/trunk/arch/arm/mach-omap1/pm_bus.c @@ -19,8 +19,7 @@ #include #include -#include -#include +#include "soc.h" #ifdef CONFIG_PM_RUNTIME static int omap1_pm_runtime_suspend(struct device *dev) diff --git a/trunk/arch/arm/mach-omap1/reset.c b/trunk/arch/arm/mach-omap1/reset.c index b17709103866..5eebd7e889d0 100644 --- a/trunk/arch/arm/mach-omap1/reset.c +++ b/trunk/arch/arm/mach-omap1/reset.c @@ -4,12 +4,24 @@ #include #include -#include - #include +#include "iomap.h" #include "common.h" +/* ARM_SYSST bit shifts related to SoC reset sources */ +#define ARM_SYSST_POR_SHIFT 5 +#define ARM_SYSST_EXT_RST_SHIFT 4 +#define ARM_SYSST_ARM_WDRST_SHIFT 2 +#define ARM_SYSST_GLOB_SWRST_SHIFT 1 + +/* Standardized reset source bits (across all OMAP SoCs) */ +#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT 0 +#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT 1 +#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3 +#define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5 + + void omap1_restart(char mode, const char *cmd) { /* @@ -23,3 +35,28 @@ void omap1_restart(char mode, const char *cmd) omap_writew(1, ARM_RSTCT1); } + +/** + * omap1_get_reset_sources - return the source of the SoC's last reset + * + * Returns bits that represent the last reset source for the SoC. The + * format is standardized across OMAPs for use by the OMAP watchdog. + */ +u32 omap1_get_reset_sources(void) +{ + u32 ret = 0; + u16 rs; + + rs = __raw_readw(OMAP1_IO_ADDRESS(ARM_SYSST)); + + if (rs & (1 << ARM_SYSST_POR_SHIFT)) + ret |= 1 << OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT; + if (rs & (1 << ARM_SYSST_EXT_RST_SHIFT)) + ret |= 1 << OMAP_EXTWARM_RST_SRC_ID_SHIFT; + if (rs & (1 << ARM_SYSST_ARM_WDRST_SHIFT)) + ret |= 1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT; + if (rs & (1 << ARM_SYSST_GLOB_SWRST_SHIFT)) + ret |= 1 << OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT; + + return ret; +} diff --git a/trunk/arch/arm/mach-omap1/serial.c b/trunk/arch/arm/mach-omap1/serial.c index b9d6834af835..d1ac08016f0b 100644 --- a/trunk/arch/arm/mach-omap1/serial.c +++ b/trunk/arch/arm/mach-omap1/serial.c @@ -23,7 +23,6 @@ #include #include -#include #include "pm.h" diff --git a/trunk/arch/arm/mach-omap1/sleep.S b/trunk/arch/arm/mach-omap1/sleep.S index 0e628743bd03..a908c51839a4 100644 --- a/trunk/arch/arm/mach-omap1/sleep.S +++ b/trunk/arch/arm/mach-omap1/sleep.S @@ -36,6 +36,8 @@ #include +#include + #include "iomap.h" #include "pm.h" diff --git a/trunk/arch/arm/mach-omap1/soc.h b/trunk/arch/arm/mach-omap1/soc.h new file mode 100644 index 000000000000..69daf0187b1d --- /dev/null +++ b/trunk/arch/arm/mach-omap1/soc.h @@ -0,0 +1,4 @@ +/* + * We can move mach/soc.h here once the drivers are fixed + */ +#include diff --git a/trunk/arch/arm/mach-omap1/sram-init.c b/trunk/arch/arm/mach-omap1/sram-init.c new file mode 100644 index 000000000000..6431b0f862ce --- /dev/null +++ b/trunk/arch/arm/mach-omap1/sram-init.c @@ -0,0 +1,76 @@ +/* + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include "soc.h" +#include "sram.h" + +#define OMAP1_SRAM_PA 0x20000000 +#define SRAM_BOOTLOADER_SZ 0x80 + +/* + * The amount of SRAM depends on the core type. + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +static void __init omap_detect_and_map_sram(void) +{ + unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ; + unsigned long omap_sram_start = OMAP1_SRAM_PA; + unsigned long omap_sram_size; + + if (cpu_is_omap7xx()) + omap_sram_size = 0x32000; /* 200K */ + else if (cpu_is_omap15xx()) + omap_sram_size = 0x30000; /* 192K */ + else if (cpu_is_omap1610() || cpu_is_omap1611() || + cpu_is_omap1621() || cpu_is_omap1710()) + omap_sram_size = 0x4000; /* 16K */ + else { + pr_err("Could not detect SRAM size\n"); + omap_sram_size = 0x4000; + } + + omap_map_sram(omap_sram_start, omap_sram_size, + omap_sram_skip, 1); +} + +static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); + +void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) +{ + BUG_ON(!_omap_sram_reprogram_clock); + /* On 730, bit 13 must always be 1 */ + if (cpu_is_omap7xx()) + ckctl |= 0x2000; + _omap_sram_reprogram_clock(dpllctl, ckctl); +} + +int __init omap_sram_init(void) +{ + omap_detect_and_map_sram(); + _omap_sram_reprogram_clock = + omap_sram_push(omap1_sram_reprogram_clock, + omap1_sram_reprogram_clock_sz); + + return 0; +} diff --git a/trunk/arch/arm/mach-omap1/sram.h b/trunk/arch/arm/mach-omap1/sram.h new file mode 100644 index 000000000000..d5a6c8362301 --- /dev/null +++ b/trunk/arch/arm/mach-omap1/sram.h @@ -0,0 +1,7 @@ +#include + +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +/* Do not use these */ +extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap1_sram_reprogram_clock_sz; diff --git a/trunk/arch/arm/mach-omap1/timer32k.c b/trunk/arch/arm/mach-omap1/timer32k.c index 74529549130c..89368195bf08 100644 --- a/trunk/arch/arm/mach-omap1/timer32k.c +++ b/trunk/arch/arm/mach-omap1/timer32k.c @@ -50,6 +50,7 @@ #include #include +#include #include #include diff --git a/trunk/arch/arm/mach-omap1/usb.c b/trunk/arch/arm/mach-omap1/usb.c index 84267edd9421..104fed366b8f 100644 --- a/trunk/arch/arm/mach-omap1/usb.c +++ b/trunk/arch/arm/mach-omap1/usb.c @@ -301,7 +301,7 @@ static inline void otg_device_init(struct omap_usb_config *pdata) #endif -u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) +static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) { u32 syscon1 = 0; @@ -409,7 +409,7 @@ u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) return syscon1 << 16; } -u32 __init omap1_usb1_init(unsigned nwires) +static u32 __init omap1_usb1_init(unsigned nwires) { u32 syscon1 = 0; @@ -475,7 +475,7 @@ u32 __init omap1_usb1_init(unsigned nwires) return syscon1 << 20; } -u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) +static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) { u32 syscon1 = 0; diff --git a/trunk/arch/arm/mach-omap2/Makefile b/trunk/arch/arm/mach-omap2/Makefile index fe40d9e488c9..78cbb8c5992e 100644 --- a/trunk/arch/arm/mach-omap2/Makefile +++ b/trunk/arch/arm/mach-omap2/Makefile @@ -4,30 +4,37 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o - -# INTCPS IP block support - XXX should be moved to drivers/ -obj-$(CONFIG_ARCH_OMAP2) += irq.o -obj-$(CONFIG_ARCH_OMAP3) += irq.o -obj-$(CONFIG_SOC_AM33XX) += irq.o - -# Secure monitor API support -obj-$(CONFIG_ARCH_OMAP3) += omap-smc.o omap-secure.o -obj-$(CONFIG_ARCH_OMAP4) += omap-smc.o omap-secure.o -obj-$(CONFIG_SOC_OMAP5) += omap-smc.o omap-secure.o + common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ + omap_device.o sram.o + +omap-2-3-common = irq.o +hwmod-common = omap_hwmod.o \ + omap_hwmod_common_data.o +clock-common = clock.o clock_common_data.o \ + clkt_dpll.o clkt_clksel.o +secure-common = omap-smc.o omap-secure.o + +obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) +obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) +obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common) ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) obj-y += mcbsp.o endif -obj-$(CONFIG_TWL4030_CORE) += omap_twl.o +obj-$(CONFIG_TWL4030_CORE) += omap_twl.o +obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # SMP support ONLY available for OMAP4 obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o -obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o -obj-$(CONFIG_SOC_OMAP5) += omap4-common.o omap-wakeupgen.o +omap-4-5-common = omap4-common.o omap-wakeupgen.o \ + sleep44xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) +obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) @@ -43,6 +50,11 @@ AFLAGS_sram242x.o :=-Wa,-march=armv6 AFLAGS_sram243x.o :=-Wa,-march=armv6 AFLAGS_sram34xx.o :=-Wa,-march=armv7-a +# Restart code (OMAP4/5 currently in omap4-common.c) +obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o +obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o +obj-$(CONFIG_ARCH_OMAP3) += omap3-restart.o + # Pin multiplexing obj-$(CONFIG_SOC_OMAP2420) += mux2420.o obj-$(CONFIG_SOC_OMAP2430) += mux2430.o @@ -52,7 +64,6 @@ obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o # SMS/SDRC obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o -obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # OPP table initialization ifeq ($(CONFIG_PM_OPP),y) @@ -63,15 +74,16 @@ endif # Power Management ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o sleep24xx.o +obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o +obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o -obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o -obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o sleep44xx.o +obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o +obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o -obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o +obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) @@ -83,76 +95,82 @@ endif endif ifeq ($(CONFIG_CPU_IDLE),y) -obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o -obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o +obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o +obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o endif # PRCM -obj-y += prcm.o prm_common.o -obj-$(CONFIG_ARCH_OMAP2) += cm2xxx_3xxx.o prm2xxx_3xxx.o -obj-$(CONFIG_ARCH_OMAP3) += cm2xxx_3xxx.o prm2xxx_3xxx.o +obj-y += prm_common.o cm_common.o +obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o +obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \ prcm_mpu44xx.o prminst44xx.o \ - vc44xx_data.o vp44xx_data.o \ - prm44xx.o + vc44xx_data.o vp44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common) # OMAP voltage domains -obj-y += voltage.o vc.o vp.o +voltagedomain-common := voltage.o vc.o vp.o +obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o +obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o +obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o -obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o +obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common) +obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o +obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common) # OMAP powerdomain framework -obj-y += powerdomain.o powerdomain-common.o +powerdomain-common += powerdomain.o powerdomain-common.o +obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o -obj-$(CONFIG_ARCH_OMAP2) += powerdomain2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o -obj-$(CONFIG_ARCH_OMAP3) += powerdomain2xxx_3xxx.o +obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o -obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o -obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o +obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common) obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o -obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o +obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common) # PRCM clockdomain control -obj-y += clockdomain.o -obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o +clockdomain-common += clockdomain.o +obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o -obj-$(CONFIG_ARCH_OMAP3) += clockdomain2xxx_3xxx.o +obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o -obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o +obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o -obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o +obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common) obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o -obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o +obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common) # Clock framework -obj-y += clock.o clock_common_data.o \ - clkt_dpll.o clkt_clksel.o -obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o -obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o clkt2xxx_sys.o +obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o +obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_sys.o +obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o -obj-$(CONFIG_ARCH_OMAP3) += clock3xxx.o +obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o -obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o clkt_iclk.o +obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o -obj-$(CONFIG_ARCH_OMAP4) += clock44xx_data.o +obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o +obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o -obj-$(CONFIG_SOC_AM33XX) += dpll3xxx.o clock33xx_data.o +obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o +obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o +obj-$(CONFIG_SOC_OMAP5) += $(clock-common) obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o # OMAP2 clock rate set data (old "OPP" data) @@ -160,7 +178,6 @@ obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o # hwmod data -obj-y += omap_hwmod_common_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o @@ -206,10 +223,10 @@ obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o -obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o +obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o -obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o -obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o +obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o +obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o obj-$(CONFIG_MACH_OVERO) += board-overo.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o diff --git a/trunk/arch/arm/mach-omap2/am33xx.h b/trunk/arch/arm/mach-omap2/am33xx.h index 06c19bb7bca6..43296c1af9ee 100644 --- a/trunk/arch/arm/mach-omap2/am33xx.h +++ b/trunk/arch/arm/mach-omap2/am33xx.h @@ -21,5 +21,6 @@ #define AM33XX_SCM_BASE 0x44E10000 #define AM33XX_CTRL_BASE AM33XX_SCM_BASE #define AM33XX_PRCM_BASE 0x44E00000 +#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + 0x3FC) #endif /* __ASM_ARCH_AM33XX_H */ diff --git a/trunk/arch/arm/mach-omap2/am35xx-emac.c b/trunk/arch/arm/mach-omap2/am35xx-emac.c index d0c54c573d34..af11dcdb7e2c 100644 --- a/trunk/arch/arm/mach-omap2/am35xx-emac.c +++ b/trunk/arch/arm/mach-omap2/am35xx-emac.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include "omap_device.h" #include "am35xx.h" #include "control.h" #include "am35xx-emac.h" diff --git a/trunk/arch/arm/mach-omap2/board-2430sdp.c b/trunk/arch/arm/mach-omap2/board-2430sdp.c index 95b384d54f8a..4815ea6f8f5d 100644 --- a/trunk/arch/arm/mach-omap2/board-2430sdp.c +++ b/trunk/arch/arm/mach-omap2/board-2430sdp.c @@ -28,14 +28,12 @@ #include #include -#include #include #include #include #include "common.h" -#include -#include +#include "gpmc.h" #include "gpmc-smc91x.h" #include