diff --git a/[refs] b/[refs]
index 17cd115c0061..d1e6dfab4a84 100644
--- a/[refs]
+++ b/[refs]
@@ -1,2 +1,2 @@
---
-refs/heads/master: c65631781eb0f2e81865017c1484e9aef76e1b61
+refs/heads/master: 500156a0f0e81e24991f5f0db56e859db1fbdacf
diff --git a/trunk/Documentation/DocBook/libata.tmpl b/trunk/Documentation/DocBook/libata.tmpl
index d260d92089ad..5bcbb6ee3bc0 100644
--- a/trunk/Documentation/DocBook/libata.tmpl
+++ b/trunk/Documentation/DocBook/libata.tmpl
@@ -120,14 +120,27 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
void (*set_piomode) (struct ata_port *, struct ata_device *);
void (*set_dmamode) (struct ata_port *, struct ata_device *);
-void (*post_set_mode) (struct ata_port *ap);
+void (*post_set_mode) (struct ata_port *);
+unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned int);
Hooks called prior to the issue of SET FEATURES - XFER MODE
- command. dev->pio_mode is guaranteed to be valid when
- ->set_piomode() is called, and dev->dma_mode is guaranteed to be
- valid when ->set_dmamode() is called. ->post_set_mode() is
+ command. The optional ->mode_filter() hook is called when libata
+ has built a mask of the possible modes. This is passed to the
+ ->mode_filter() function which should return a mask of valid modes
+ after filtering those unsuitable due to hardware limits. It is not
+ valid to use this interface to add modes.
+
+
+ dev->pio_mode and dev->dma_mode are guaranteed to be valid when
+ ->set_piomode() and when ->set_dmamode() is called. The timings for
+ any other drive sharing the cable will also be valid at this point.
+ That is the library records the decisions for the modes of each
+ drive on a channel before it attempts to set any of them.
+
+
+ ->post_set_mode() is
called unconditionally, after the SET FEATURES - XFER MODE
command completes successfully.
@@ -230,6 +243,32 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
+ Private tuning method
+
+void (*set_mode) (struct ata_port *ap);
+
+
+
+ By default libata performs drive and controller tuning in
+ accordance with the ATA timing rules and also applies blacklists
+ and cable limits. Some controllers need special handling and have
+ custom tuning rules, typically raid controllers that use ATA
+ commands but do not actually do drive timing.
+
+
+
+
+ This hook should not be used to replace the standard controller
+ tuning logic when a controller has quirks. Replacing the default
+ tuning logic in that case would bypass handling for drive and
+ bridge quirks that may be important to data reliability. If a
+ controller needs to filter the mode selection it should use the
+ mode_filter hook instead.
+
+
+
+
+
Reset ATA bus
void (*phy_reset) (struct ata_port *ap);
diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt
index 495858b236b6..59d0c74c79c9 100644
--- a/trunk/Documentation/feature-removal-schedule.txt
+++ b/trunk/Documentation/feature-removal-schedule.txt
@@ -127,13 +127,6 @@ Who: Christoph Hellwig
---------------------------
-What: EXPORT_SYMBOL(lookup_hash)
-When: January 2006
-Why: Too low-level interface. Use lookup_one_len or lookup_create instead.
-Who: Christoph Hellwig
-
----------------------------
-
What: CONFIG_FORCED_INLINING
When: June 2006
Why: Config option is there to see if gcc is good enough. (in january
@@ -241,3 +234,15 @@ Why: The USB subsystem has changed a lot over time, and it has been
Who: Greg Kroah-Hartman
---------------------------
+
+What: find_trylock_page
+When: January 2007
+Why: The interface no longer has any callers left in the kernel. It
+ is an odd interface (compared with other find_*_page functions), in
+ that it does not take a refcount to the page, only the page lock.
+ It should be replaced with find_get_page or find_lock_page if possible.
+ This feature removal can be reevaluated if users of the interface
+ cannot cleanly use something else.
+Who: Nick Piggin
+
+---------------------------
diff --git a/trunk/Documentation/leds-class.txt b/trunk/Documentation/leds-class.txt
new file mode 100644
index 000000000000..8c35c0426110
--- /dev/null
+++ b/trunk/Documentation/leds-class.txt
@@ -0,0 +1,71 @@
+LED handling under Linux
+========================
+
+If you're reading this and thinking about keyboard leds, these are
+handled by the input subsystem and the led class is *not* needed.
+
+In its simplest form, the LED class just allows control of LEDs from
+userspace. LEDs appear in /sys/class/leds/. The brightness file will
+set the brightness of the LED (taking a value 0-255). Most LEDs don't
+have hardware brightness support so will just be turned on for non-zero
+brightness settings.
+
+The class also introduces the optional concept of an LED trigger. A trigger
+is a kernel based source of led events. Triggers can either be simple or
+complex. A simple trigger isn't configurable and is designed to slot into
+existing subsystems with minimal additional code. Examples are the ide-disk,
+nand-disk and sharpsl-charge triggers. With led triggers disabled, the code
+optimises away.
+
+Complex triggers whilst available to all LEDs have LED specific
+parameters and work on a per LED basis. The timer trigger is an example.
+
+You can change triggers in a similar manner to the way an IO scheduler
+is chosen (via /sys/class/leds//trigger). Trigger specific
+parameters can appear in /sys/class/leds/ once a given trigger is
+selected.
+
+
+Design Philosophy
+=================
+
+The underlying design philosophy is simplicity. LEDs are simple devices
+and the aim is to keep a small amount of code giving as much functionality
+as possible. Please keep this in mind when suggesting enhancements.
+
+
+LED Device Naming
+=================
+
+Is currently of the form:
+
+"devicename:colour"
+
+There have been calls for LED properties such as colour to be exported as
+individual led class attributes. As a solution which doesn't incur as much
+overhead, I suggest these become part of the device name. The naming scheme
+above leaves scope for further attributes should they be needed.
+
+
+Known Issues
+============
+
+The LED Trigger core cannot be a module as the simple trigger functions
+would cause nightmare dependency issues. I see this as a minor issue
+compared to the benefits the simple trigger functionality brings. The
+rest of the LED subsystem can be modular.
+
+Some leds can be programmed to flash in hardware. As this isn't a generic
+LED device property, this should be exported as a device specific sysfs
+attribute rather than part of the class if this functionality is required.
+
+
+Future Development
+==================
+
+At the moment, a trigger can't be created specifically for a single LED.
+There are a number of cases where a trigger might only be mappable to a
+particular LED (ACPI?). The addition of triggers provided by the LED driver
+should cover this option and be possible to add without breaking the
+current interface.
+
diff --git a/trunk/Documentation/memory-barriers.txt b/trunk/Documentation/memory-barriers.txt
new file mode 100644
index 000000000000..f8550310a6d5
--- /dev/null
+++ b/trunk/Documentation/memory-barriers.txt
@@ -0,0 +1,1913 @@
+ ============================
+ LINUX KERNEL MEMORY BARRIERS
+ ============================
+
+By: David Howells
+
+Contents:
+
+ (*) Abstract memory access model.
+
+ - Device operations.
+ - Guarantees.
+
+ (*) What are memory barriers?
+
+ - Varieties of memory barrier.
+ - What may not be assumed about memory barriers?
+ - Data dependency barriers.
+ - Control dependencies.
+ - SMP barrier pairing.
+ - Examples of memory barrier sequences.
+
+ (*) Explicit kernel barriers.
+
+ - Compiler barrier.
+ - The CPU memory barriers.
+ - MMIO write barrier.
+
+ (*) Implicit kernel memory barriers.
+
+ - Locking functions.
+ - Interrupt disabling functions.
+ - Miscellaneous functions.
+
+ (*) Inter-CPU locking barrier effects.
+
+ - Locks vs memory accesses.
+ - Locks vs I/O accesses.
+
+ (*) Where are memory barriers needed?
+
+ - Interprocessor interaction.
+ - Atomic operations.
+ - Accessing devices.
+ - Interrupts.
+
+ (*) Kernel I/O barrier effects.
+
+ (*) Assumed minimum execution ordering model.
+
+ (*) The effects of the cpu cache.
+
+ - Cache coherency.
+ - Cache coherency vs DMA.
+ - Cache coherency vs MMIO.
+
+ (*) The things CPUs get up to.
+
+ - And then there's the Alpha.
+
+ (*) References.
+
+
+============================
+ABSTRACT MEMORY ACCESS MODEL
+============================
+
+Consider the following abstract model of the system:
+
+ : :
+ : :
+ : :
+ +-------+ : +--------+ : +-------+
+ | | : | | : | |
+ | | : | | : | |
+ | CPU 1 |<----->| Memory |<----->| CPU 2 |
+ | | : | | : | |
+ | | : | | : | |
+ +-------+ : +--------+ : +-------+
+ ^ : ^ : ^
+ | : | : |
+ | : | : |
+ | : v : |
+ | : +--------+ : |
+ | : | | : |
+ | : | | : |
+ +---------->| Device |<----------+
+ : | | :
+ : | | :
+ : +--------+ :
+ : :
+
+Each CPU executes a program that generates memory access operations. In the
+abstract CPU, memory operation ordering is very relaxed, and a CPU may actually
+perform the memory operations in any order it likes, provided program causality
+appears to be maintained. Similarly, the compiler may also arrange the
+instructions it emits in any order it likes, provided it doesn't affect the
+apparent operation of the program.
+
+So in the above diagram, the effects of the memory operations performed by a
+CPU are perceived by the rest of the system as the operations cross the
+interface between the CPU and rest of the system (the dotted lines).
+
+
+For example, consider the following sequence of events:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { A == 1; B == 2 }
+ A = 3; x = A;
+ B = 4; y = B;
+
+The set of accesses as seen by the memory system in the middle can be arranged
+in 24 different combinations:
+
+ STORE A=3, STORE B=4, x=LOAD A->3, y=LOAD B->4
+ STORE A=3, STORE B=4, y=LOAD B->4, x=LOAD A->3
+ STORE A=3, x=LOAD A->3, STORE B=4, y=LOAD B->4
+ STORE A=3, x=LOAD A->3, y=LOAD B->2, STORE B=4
+ STORE A=3, y=LOAD B->2, STORE B=4, x=LOAD A->3
+ STORE A=3, y=LOAD B->2, x=LOAD A->3, STORE B=4
+ STORE B=4, STORE A=3, x=LOAD A->3, y=LOAD B->4
+ STORE B=4, ...
+ ...
+
+and can thus result in four different combinations of values:
+
+ x == 1, y == 2
+ x == 1, y == 4
+ x == 3, y == 2
+ x == 3, y == 4
+
+
+Furthermore, the stores committed by a CPU to the memory system may not be
+perceived by the loads made by another CPU in the same order as the stores were
+committed.
+
+
+As a further example, consider this sequence of events:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { A == 1, B == 2, C = 3, P == &A, Q == &C }
+ B = 4; Q = P;
+ P = &B D = *Q;
+
+There is an obvious data dependency here, as the value loaded into D depends on
+the address retrieved from P by CPU 2. At the end of the sequence, any of the
+following results are possible:
+
+ (Q == &A) and (D == 1)
+ (Q == &B) and (D == 2)
+ (Q == &B) and (D == 4)
+
+Note that CPU 2 will never try and load C into D because the CPU will load P
+into Q before issuing the load of *Q.
+
+
+DEVICE OPERATIONS
+-----------------
+
+Some devices present their control interfaces as collections of memory
+locations, but the order in which the control registers are accessed is very
+important. For instance, imagine an ethernet card with a set of internal
+registers that are accessed through an address port register (A) and a data
+port register (D). To read internal register 5, the following code might then
+be used:
+
+ *A = 5;
+ x = *D;
+
+but this might show up as either of the following two sequences:
+
+ STORE *A = 5, x = LOAD *D
+ x = LOAD *D, STORE *A = 5
+
+the second of which will almost certainly result in a malfunction, since it set
+the address _after_ attempting to read the register.
+
+
+GUARANTEES
+----------
+
+There are some minimal guarantees that may be expected of a CPU:
+
+ (*) On any given CPU, dependent memory accesses will be issued in order, with
+ respect to itself. This means that for:
+
+ Q = P; D = *Q;
+
+ the CPU will issue the following memory operations:
+
+ Q = LOAD P, D = LOAD *Q
+
+ and always in that order.
+
+ (*) Overlapping loads and stores within a particular CPU will appear to be
+ ordered within that CPU. This means that for:
+
+ a = *X; *X = b;
+
+ the CPU will only issue the following sequence of memory operations:
+
+ a = LOAD *X, STORE *X = b
+
+ And for:
+
+ *X = c; d = *X;
+
+ the CPU will only issue:
+
+ STORE *X = c, d = LOAD *X
+
+ (Loads and stores overlap if they are targetted at overlapping pieces of
+ memory).
+
+And there are a number of things that _must_ or _must_not_ be assumed:
+
+ (*) It _must_not_ be assumed that independent loads and stores will be issued
+ in the order given. This means that for:
+
+ X = *A; Y = *B; *D = Z;
+
+ we may get any of the following sequences:
+
+ X = LOAD *A, Y = LOAD *B, STORE *D = Z
+ X = LOAD *A, STORE *D = Z, Y = LOAD *B
+ Y = LOAD *B, X = LOAD *A, STORE *D = Z
+ Y = LOAD *B, STORE *D = Z, X = LOAD *A
+ STORE *D = Z, X = LOAD *A, Y = LOAD *B
+ STORE *D = Z, Y = LOAD *B, X = LOAD *A
+
+ (*) It _must_ be assumed that overlapping memory accesses may be merged or
+ discarded. This means that for:
+
+ X = *A; Y = *(A + 4);
+
+ we may get any one of the following sequences:
+
+ X = LOAD *A; Y = LOAD *(A + 4);
+ Y = LOAD *(A + 4); X = LOAD *A;
+ {X, Y} = LOAD {*A, *(A + 4) };
+
+ And for:
+
+ *A = X; Y = *A;
+
+ we may get either of:
+
+ STORE *A = X; Y = LOAD *A;
+ STORE *A = Y;
+
+
+=========================
+WHAT ARE MEMORY BARRIERS?
+=========================
+
+As can be seen above, independent memory operations are effectively performed
+in random order, but this can be a problem for CPU-CPU interaction and for I/O.
+What is required is some way of intervening to instruct the compiler and the
+CPU to restrict the order.
+
+Memory barriers are such interventions. They impose a perceived partial
+ordering between the memory operations specified on either side of the barrier.
+They request that the sequence of memory events generated appears to other
+parts of the system as if the barrier is effective on that CPU.
+
+
+VARIETIES OF MEMORY BARRIER
+---------------------------
+
+Memory barriers come in four basic varieties:
+
+ (1) Write (or store) memory barriers.
+
+ A write memory barrier gives a guarantee that all the STORE operations
+ specified before the barrier will appear to happen before all the STORE
+ operations specified after the barrier with respect to the other
+ components of the system.
+
+ A write barrier is a partial ordering on stores only; it is not required
+ to have any effect on loads.
+
+ A CPU can be viewed as as commiting a sequence of store operations to the
+ memory system as time progresses. All stores before a write barrier will
+ occur in the sequence _before_ all the stores after the write barrier.
+
+ [!] Note that write barriers should normally be paired with read or data
+ dependency barriers; see the "SMP barrier pairing" subsection.
+
+
+ (2) Data dependency barriers.
+
+ A data dependency barrier is a weaker form of read barrier. In the case
+ where two loads are performed such that the second depends on the result
+ of the first (eg: the first load retrieves the address to which the second
+ load will be directed), a data dependency barrier would be required to
+ make sure that the target of the second load is updated before the address
+ obtained by the first load is accessed.
+
+ A data dependency barrier is a partial ordering on interdependent loads
+ only; it is not required to have any effect on stores, independent loads
+ or overlapping loads.
+
+ As mentioned in (1), the other CPUs in the system can be viewed as
+ committing sequences of stores to the memory system that the CPU being
+ considered can then perceive. A data dependency barrier issued by the CPU
+ under consideration guarantees that for any load preceding it, if that
+ load touches one of a sequence of stores from another CPU, then by the
+ time the barrier completes, the effects of all the stores prior to that
+ touched by the load will be perceptible to any loads issued after the data
+ dependency barrier.
+
+ See the "Examples of memory barrier sequences" subsection for diagrams
+ showing the ordering constraints.
+
+ [!] Note that the first load really has to have a _data_ dependency and
+ not a control dependency. If the address for the second load is dependent
+ on the first load, but the dependency is through a conditional rather than
+ actually loading the address itself, then it's a _control_ dependency and
+ a full read barrier or better is required. See the "Control dependencies"
+ subsection for more information.
+
+ [!] Note that data dependency barriers should normally be paired with
+ write barriers; see the "SMP barrier pairing" subsection.
+
+
+ (3) Read (or load) memory barriers.
+
+ A read barrier is a data dependency barrier plus a guarantee that all the
+ LOAD operations specified before the barrier will appear to happen before
+ all the LOAD operations specified after the barrier with respect to the
+ other components of the system.
+
+ A read barrier is a partial ordering on loads only; it is not required to
+ have any effect on stores.
+
+ Read memory barriers imply data dependency barriers, and so can substitute
+ for them.
+
+ [!] Note that read barriers should normally be paired with write barriers;
+ see the "SMP barrier pairing" subsection.
+
+
+ (4) General memory barriers.
+
+ A general memory barrier is a combination of both a read memory barrier
+ and a write memory barrier. It is a partial ordering over both loads and
+ stores.
+
+ General memory barriers imply both read and write memory barriers, and so
+ can substitute for either.
+
+
+And a couple of implicit varieties:
+
+ (5) LOCK operations.
+
+ This acts as a one-way permeable barrier. It guarantees that all memory
+ operations after the LOCK operation will appear to happen after the LOCK
+ operation with respect to the other components of the system.
+
+ Memory operations that occur before a LOCK operation may appear to happen
+ after it completes.
+
+ A LOCK operation should almost always be paired with an UNLOCK operation.
+
+
+ (6) UNLOCK operations.
+
+ This also acts as a one-way permeable barrier. It guarantees that all
+ memory operations before the UNLOCK operation will appear to happen before
+ the UNLOCK operation with respect to the other components of the system.
+
+ Memory operations that occur after an UNLOCK operation may appear to
+ happen before it completes.
+
+ LOCK and UNLOCK operations are guaranteed to appear with respect to each
+ other strictly in the order specified.
+
+ The use of LOCK and UNLOCK operations generally precludes the need for
+ other sorts of memory barrier (but note the exceptions mentioned in the
+ subsection "MMIO write barrier").
+
+
+Memory barriers are only required where there's a possibility of interaction
+between two CPUs or between a CPU and a device. If it can be guaranteed that
+there won't be any such interaction in any particular piece of code, then
+memory barriers are unnecessary in that piece of code.
+
+
+Note that these are the _minimum_ guarantees. Different architectures may give
+more substantial guarantees, but they may _not_ be relied upon outside of arch
+specific code.
+
+
+WHAT MAY NOT BE ASSUMED ABOUT MEMORY BARRIERS?
+----------------------------------------------
+
+There are certain things that the Linux kernel memory barriers do not guarantee:
+
+ (*) There is no guarantee that any of the memory accesses specified before a
+ memory barrier will be _complete_ by the completion of a memory barrier
+ instruction; the barrier can be considered to draw a line in that CPU's
+ access queue that accesses of the appropriate type may not cross.
+
+ (*) There is no guarantee that issuing a memory barrier on one CPU will have
+ any direct effect on another CPU or any other hardware in the system. The
+ indirect effect will be the order in which the second CPU sees the effects
+ of the first CPU's accesses occur, but see the next point:
+
+ (*) There is no guarantee that the a CPU will see the correct order of effects
+ from a second CPU's accesses, even _if_ the second CPU uses a memory
+ barrier, unless the first CPU _also_ uses a matching memory barrier (see
+ the subsection on "SMP Barrier Pairing").
+
+ (*) There is no guarantee that some intervening piece of off-the-CPU
+ hardware[*] will not reorder the memory accesses. CPU cache coherency
+ mechanisms should propagate the indirect effects of a memory barrier
+ between CPUs, but might not do so in order.
+
+ [*] For information on bus mastering DMA and coherency please read:
+
+ Documentation/pci.txt
+ Documentation/DMA-mapping.txt
+ Documentation/DMA-API.txt
+
+
+DATA DEPENDENCY BARRIERS
+------------------------
+
+The usage requirements of data dependency barriers are a little subtle, and
+it's not always obvious that they're needed. To illustrate, consider the
+following sequence of events:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { A == 1, B == 2, C = 3, P == &A, Q == &C }
+ B = 4;
+
+ P = &B
+ Q = P;
+ D = *Q;
+
+There's a clear data dependency here, and it would seem that by the end of the
+sequence, Q must be either &A or &B, and that:
+
+ (Q == &A) implies (D == 1)
+ (Q == &B) implies (D == 4)
+
+But! CPU 2's perception of P may be updated _before_ its perception of B, thus
+leading to the following situation:
+
+ (Q == &B) and (D == 2) ????
+
+Whilst this may seem like a failure of coherency or causality maintenance, it
+isn't, and this behaviour can be observed on certain real CPUs (such as the DEC
+Alpha).
+
+To deal with this, a data dependency barrier must be inserted between the
+address load and the data load:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { A == 1, B == 2, C = 3, P == &A, Q == &C }
+ B = 4;
+
+ P = &B
+ Q = P;
+
+ D = *Q;
+
+This enforces the occurrence of one of the two implications, and prevents the
+third possibility from arising.
+
+[!] Note that this extremely counterintuitive situation arises most easily on
+machines with split caches, so that, for example, one cache bank processes
+even-numbered cache lines and the other bank processes odd-numbered cache
+lines. The pointer P might be stored in an odd-numbered cache line, and the
+variable B might be stored in an even-numbered cache line. Then, if the
+even-numbered bank of the reading CPU's cache is extremely busy while the
+odd-numbered bank is idle, one can see the new value of the pointer P (&B),
+but the old value of the variable B (1).
+
+
+Another example of where data dependency barriers might by required is where a
+number is read from memory and then used to calculate the index for an array
+access:
+
+ CPU 1 CPU 2
+ =============== ===============
+ { M[0] == 1, M[1] == 2, M[3] = 3, P == 0, Q == 3 }
+ M[1] = 4;
+
+ P = 1
+ Q = P;
+
+ D = M[Q];
+
+
+The data dependency barrier is very important to the RCU system, for example.
+See rcu_dereference() in include/linux/rcupdate.h. This permits the current
+target of an RCU'd pointer to be replaced with a new modified target, without
+the replacement target appearing to be incompletely initialised.
+
+See also the subsection on "Cache Coherency" for a more thorough example.
+
+
+CONTROL DEPENDENCIES
+--------------------
+
+A control dependency requires a full read memory barrier, not simply a data
+dependency barrier to make it work correctly. Consider the following bit of
+code:
+
+ q = &a;
+ if (p)
+ q = &b;
+
+ x = *q;
+
+This will not have the desired effect because there is no actual data
+dependency, but rather a control dependency that the CPU may short-circuit by
+attempting to predict the outcome in advance. In such a case what's actually
+required is:
+
+ q = &a;
+ if (p)
+ q = &b;
+
+ x = *q;
+
+
+SMP BARRIER PAIRING
+-------------------
+
+When dealing with CPU-CPU interactions, certain types of memory barrier should
+always be paired. A lack of appropriate pairing is almost certainly an error.
+
+A write barrier should always be paired with a data dependency barrier or read
+barrier, though a general barrier would also be viable. Similarly a read
+barrier or a data dependency barrier should always be paired with at least an
+write barrier, though, again, a general barrier is viable:
+
+ CPU 1 CPU 2
+ =============== ===============
+ a = 1;
+
+ b = 2; x = a;
+
+ y = b;
+
+Or:
+
+ CPU 1 CPU 2
+ =============== ===============================
+ a = 1;
+
+ b = &a; x = b;
+
+ y = *x;
+
+Basically, the read barrier always has to be there, even though it can be of
+the "weaker" type.
+
+
+EXAMPLES OF MEMORY BARRIER SEQUENCES
+------------------------------------
+
+Firstly, write barriers act as a partial orderings on store operations.
+Consider the following sequence of events:
+
+ CPU 1
+ =======================
+ STORE A = 1
+ STORE B = 2
+ STORE C = 3
+
+ STORE D = 4
+ STORE E = 5
+
+This sequence of events is committed to the memory coherence system in an order
+that the rest of the system might perceive as the unordered set of { STORE A,
+STORE B, STORE C } all occuring before the unordered set of { STORE D, STORE E
+}:
+
+ +-------+ : :
+ | | +------+
+ | |------>| C=3 | } /\
+ | | : +------+ }----- \ -----> Events perceptible
+ | | : | A=1 | } \/ to rest of system
+ | | : +------+ }
+ | CPU 1 | : | B=2 | }
+ | | +------+ }
+ | | wwwwwwwwwwwwwwww } <--- At this point the write barrier
+ | | +------+ } requires all stores prior to the
+ | | : | E=5 | } barrier to be committed before
+ | | : +------+ } further stores may be take place.
+ | |------>| D=4 | }
+ | | +------+
+ +-------+ : :
+ |
+ | Sequence in which stores committed to memory system
+ | by CPU 1
+ V
+
+
+Secondly, data dependency barriers act as a partial orderings on data-dependent
+loads. Consider the following sequence of events:
+
+ CPU 1 CPU 2
+ ======================= =======================
+ STORE A = 1
+ STORE B = 2
+
+ STORE C = &B LOAD X
+ STORE D = 4 LOAD C (gets &B)
+ LOAD *C (reads B)
+
+Without intervention, CPU 2 may perceive the events on CPU 1 in some
+effectively random order, despite the write barrier issued by CPU 1:
+
+ +-------+ : : : :
+ | | +------+ +-------+ | Sequence of update
+ | |------>| B=2 |----- --->| Y->8 | | of perception on
+ | | : +------+ \ +-------+ | CPU 2
+ | CPU 1 | : | A=1 | \ --->| C->&Y | V
+ | | +------+ | +-------+
+ | | wwwwwwwwwwwwwwww | : :
+ | | +------+ | : :
+ | | : | C=&B |--- | : : +-------+
+ | | : +------+ \ | +-------+ | |
+ | |------>| D=4 | ----------->| C->&B |------>| |
+ | | +------+ | +-------+ | |
+ +-------+ : : | : : | |
+ | : : | |
+ | : : | CPU 2 |
+ | +-------+ | |
+ Apparently incorrect ---> | | B->7 |------>| |
+ perception of B (!) | +-------+ | |
+ | : : | |
+ | +-------+ | |
+ The load of X holds ---> \ | X->9 |------>| |
+ up the maintenance \ +-------+ | |
+ of coherence of B ----->| B->2 | +-------+
+ +-------+
+ : :
+
+
+In the above example, CPU 2 perceives that B is 7, despite the load of *C
+(which would be B) coming after the the LOAD of C.
+
+If, however, a data dependency barrier were to be placed between the load of C
+and the load of *C (ie: B) on CPU 2, then the following will occur:
+
+ +-------+ : : : :
+ | | +------+ +-------+
+ | |------>| B=2 |----- --->| Y->8 |
+ | | : +------+ \ +-------+
+ | CPU 1 | : | A=1 | \ --->| C->&Y |
+ | | +------+ | +-------+
+ | | wwwwwwwwwwwwwwww | : :
+ | | +------+ | : :
+ | | : | C=&B |--- | : : +-------+
+ | | : +------+ \ | +-------+ | |
+ | |------>| D=4 | ----------->| C->&B |------>| |
+ | | +------+ | +-------+ | |
+ +-------+ : : | : : | |
+ | : : | |
+ | : : | CPU 2 |
+ | +-------+ | |
+ \ | X->9 |------>| |
+ \ +-------+ | |
+ ----->| B->2 | | |
+ +-------+ | |
+ Makes sure all effects ---> ddddddddddddddddd | |
+ prior to the store of C +-------+ | |
+ are perceptible to | B->2 |------>| |
+ successive loads +-------+ | |
+ : : +-------+
+
+
+And thirdly, a read barrier acts as a partial order on loads. Consider the
+following sequence of events:
+
+ CPU 1 CPU 2
+ ======================= =======================
+ STORE A=1
+ STORE B=2
+ STORE C=3
+
+ STORE D=4
+ STORE E=5
+ LOAD A
+ LOAD B
+ LOAD C
+ LOAD D
+ LOAD E
+
+Without intervention, CPU 2 may then choose to perceive the events on CPU 1 in
+some effectively random order, despite the write barrier issued by CPU 1:
+
+ +-------+ : :
+ | | +------+
+ | |------>| C=3 | }
+ | | : +------+ }
+ | | : | A=1 | }
+ | | : +------+ }
+ | CPU 1 | : | B=2 | }---
+ | | +------+ } \
+ | | wwwwwwwwwwwww} \
+ | | +------+ } \ : : +-------+
+ | | : | E=5 | } \ +-------+ | |
+ | | : +------+ } \ { | C->3 |------>| |
+ | |------>| D=4 | } \ { +-------+ : | |
+ | | +------+ \ { | E->5 | : | |
+ +-------+ : : \ { +-------+ : | |
+ Transfer -->{ | A->1 | : | CPU 2 |
+ from CPU 1 { +-------+ : | |
+ to CPU 2 { | D->4 | : | |
+ { +-------+ : | |
+ { | B->2 |------>| |
+ +-------+ | |
+ : : +-------+
+
+
+If, however, a read barrier were to be placed between the load of C and the
+load of D on CPU 2, then the partial ordering imposed by CPU 1 will be
+perceived correctly by CPU 2.
+
+ +-------+ : :
+ | | +------+
+ | |------>| C=3 | }
+ | | : +------+ }
+ | | : | A=1 | }---
+ | | : +------+ } \
+ | CPU 1 | : | B=2 | } \
+ | | +------+ \
+ | | wwwwwwwwwwwwwwww \
+ | | +------+ \ : : +-------+
+ | | : | E=5 | } \ +-------+ | |
+ | | : +------+ }--- \ { | C->3 |------>| |
+ | |------>| D=4 | } \ \ { +-------+ : | |
+ | | +------+ \ -->{ | B->2 | : | |
+ +-------+ : : \ { +-------+ : | |
+ \ { | A->1 | : | CPU 2 |
+ \ +-------+ | |
+ At this point the read ----> \ rrrrrrrrrrrrrrrrr | |
+ barrier causes all effects \ +-------+ | |
+ prior to the storage of C \ { | E->5 | : | |
+ to be perceptible to CPU 2 -->{ +-------+ : | |
+ { | D->4 |------>| |
+ +-------+ | |
+ : : +-------+
+
+
+========================
+EXPLICIT KERNEL BARRIERS
+========================
+
+The Linux kernel has a variety of different barriers that act at different
+levels:
+
+ (*) Compiler barrier.
+
+ (*) CPU memory barriers.
+
+ (*) MMIO write barrier.
+
+
+COMPILER BARRIER
+----------------
+
+The Linux kernel has an explicit compiler barrier function that prevents the
+compiler from moving the memory accesses either side of it to the other side:
+
+ barrier();
+
+This a general barrier - lesser varieties of compiler barrier do not exist.
+
+The compiler barrier has no direct effect on the CPU, which may then reorder
+things however it wishes.
+
+
+CPU MEMORY BARRIERS
+-------------------
+
+The Linux kernel has eight basic CPU memory barriers:
+
+ TYPE MANDATORY SMP CONDITIONAL
+ =============== ======================= ===========================
+ GENERAL mb() smp_mb()
+ WRITE wmb() smp_wmb()
+ READ rmb() smp_rmb()
+ DATA DEPENDENCY read_barrier_depends() smp_read_barrier_depends()
+
+
+All CPU memory barriers unconditionally imply compiler barriers.
+
+SMP memory barriers are reduced to compiler barriers on uniprocessor compiled
+systems because it is assumed that a CPU will be appear to be self-consistent,
+and will order overlapping accesses correctly with respect to itself.
+
+[!] Note that SMP memory barriers _must_ be used to control the ordering of
+references to shared memory on SMP systems, though the use of locking instead
+is sufficient.
+
+Mandatory barriers should not be used to control SMP effects, since mandatory
+barriers unnecessarily impose overhead on UP systems. They may, however, be
+used to control MMIO effects on accesses through relaxed memory I/O windows.
+These are required even on non-SMP systems as they affect the order in which
+memory operations appear to a device by prohibiting both the compiler and the
+CPU from reordering them.
+
+
+There are some more advanced barrier functions:
+
+ (*) set_mb(var, value)
+ (*) set_wmb(var, value)
+
+ These assign the value to the variable and then insert at least a write
+ barrier after it, depending on the function. They aren't guaranteed to
+ insert anything more than a compiler barrier in a UP compilation.
+
+
+ (*) smp_mb__before_atomic_dec();
+ (*) smp_mb__after_atomic_dec();
+ (*) smp_mb__before_atomic_inc();
+ (*) smp_mb__after_atomic_inc();
+
+ These are for use with atomic add, subtract, increment and decrement
+ functions, especially when used for reference counting. These functions
+ do not imply memory barriers.
+
+ As an example, consider a piece of code that marks an object as being dead
+ and then decrements the object's reference count:
+
+ obj->dead = 1;
+ smp_mb__before_atomic_dec();
+ atomic_dec(&obj->ref_count);
+
+ This makes sure that the death mark on the object is perceived to be set
+ *before* the reference counter is decremented.
+
+ See Documentation/atomic_ops.txt for more information. See the "Atomic
+ operations" subsection for information on where to use these.
+
+
+ (*) smp_mb__before_clear_bit(void);
+ (*) smp_mb__after_clear_bit(void);
+
+ These are for use similar to the atomic inc/dec barriers. These are
+ typically used for bitwise unlocking operations, so care must be taken as
+ there are no implicit memory barriers here either.
+
+ Consider implementing an unlock operation of some nature by clearing a
+ locking bit. The clear_bit() would then need to be barriered like this:
+
+ smp_mb__before_clear_bit();
+ clear_bit( ... );
+
+ This prevents memory operations before the clear leaking to after it. See
+ the subsection on "Locking Functions" with reference to UNLOCK operation
+ implications.
+
+ See Documentation/atomic_ops.txt for more information. See the "Atomic
+ operations" subsection for information on where to use these.
+
+
+MMIO WRITE BARRIER
+------------------
+
+The Linux kernel also has a special barrier for use with memory-mapped I/O
+writes:
+
+ mmiowb();
+
+This is a variation on the mandatory write barrier that causes writes to weakly
+ordered I/O regions to be partially ordered. Its effects may go beyond the
+CPU->Hardware interface and actually affect the hardware at some level.
+
+See the subsection "Locks vs I/O accesses" for more information.
+
+
+===============================
+IMPLICIT KERNEL MEMORY BARRIERS
+===============================
+
+Some of the other functions in the linux kernel imply memory barriers, amongst
+which are locking, scheduling and memory allocation functions.
+
+This specification is a _minimum_ guarantee; any particular architecture may
+provide more substantial guarantees, but these may not be relied upon outside
+of arch specific code.
+
+
+LOCKING FUNCTIONS
+-----------------
+
+The Linux kernel has a number of locking constructs:
+
+ (*) spin locks
+ (*) R/W spin locks
+ (*) mutexes
+ (*) semaphores
+ (*) R/W semaphores
+ (*) RCU
+
+In all cases there are variants on "LOCK" operations and "UNLOCK" operations
+for each construct. These operations all imply certain barriers:
+
+ (1) LOCK operation implication:
+
+ Memory operations issued after the LOCK will be completed after the LOCK
+ operation has completed.
+
+ Memory operations issued before the LOCK may be completed after the LOCK
+ operation has completed.
+
+ (2) UNLOCK operation implication:
+
+ Memory operations issued before the UNLOCK will be completed before the
+ UNLOCK operation has completed.
+
+ Memory operations issued after the UNLOCK may be completed before the
+ UNLOCK operation has completed.
+
+ (3) LOCK vs LOCK implication:
+
+ All LOCK operations issued before another LOCK operation will be completed
+ before that LOCK operation.
+
+ (4) LOCK vs UNLOCK implication:
+
+ All LOCK operations issued before an UNLOCK operation will be completed
+ before the UNLOCK operation.
+
+ All UNLOCK operations issued before a LOCK operation will be completed
+ before the LOCK operation.
+
+ (5) Failed conditional LOCK implication:
+
+ Certain variants of the LOCK operation may fail, either due to being
+ unable to get the lock immediately, or due to receiving an unblocked
+ signal whilst asleep waiting for the lock to become available. Failed
+ locks do not imply any sort of barrier.
+
+Therefore, from (1), (2) and (4) an UNLOCK followed by an unconditional LOCK is
+equivalent to a full barrier, but a LOCK followed by an UNLOCK is not.
+
+[!] Note: one of the consequence of LOCKs and UNLOCKs being only one-way
+ barriers is that the effects instructions outside of a critical section may
+ seep into the inside of the critical section.
+
+Locks and semaphores may not provide any guarantee of ordering on UP compiled
+systems, and so cannot be counted on in such a situation to actually achieve
+anything at all - especially with respect to I/O accesses - unless combined
+with interrupt disabling operations.
+
+See also the section on "Inter-CPU locking barrier effects".
+
+
+As an example, consider the following:
+
+ *A = a;
+ *B = b;
+ LOCK
+ *C = c;
+ *D = d;
+ UNLOCK
+ *E = e;
+ *F = f;
+
+The following sequence of events is acceptable:
+
+ LOCK, {*F,*A}, *E, {*C,*D}, *B, UNLOCK
+
+ [+] Note that {*F,*A} indicates a combined access.
+
+But none of the following are:
+
+ {*F,*A}, *B, LOCK, *C, *D, UNLOCK, *E
+ *A, *B, *C, LOCK, *D, UNLOCK, *E, *F
+ *A, *B, LOCK, *C, UNLOCK, *D, *E, *F
+ *B, LOCK, *C, *D, UNLOCK, {*F,*A}, *E
+
+
+
+INTERRUPT DISABLING FUNCTIONS
+-----------------------------
+
+Functions that disable interrupts (LOCK equivalent) and enable interrupts
+(UNLOCK equivalent) will act as compiler barriers only. So if memory or I/O
+barriers are required in such a situation, they must be provided from some
+other means.
+
+
+MISCELLANEOUS FUNCTIONS
+-----------------------
+
+Other functions that imply barriers:
+
+ (*) schedule() and similar imply full memory barriers.
+
+ (*) Memory allocation and release functions imply full memory barriers.
+
+
+=================================
+INTER-CPU LOCKING BARRIER EFFECTS
+=================================
+
+On SMP systems locking primitives give a more substantial form of barrier: one
+that does affect memory access ordering on other CPUs, within the context of
+conflict on any particular lock.
+
+
+LOCKS VS MEMORY ACCESSES
+------------------------
+
+Consider the following: the system has a pair of spinlocks (N) and (Q), and
+three CPUs; then should the following sequence of events occur:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ *A = a; *E = e;
+ LOCK M LOCK Q
+ *B = b; *F = f;
+ *C = c; *G = g;
+ UNLOCK M UNLOCK Q
+ *D = d; *H = h;
+
+Then there is no guarantee as to what order CPU #3 will see the accesses to *A
+through *H occur in, other than the constraints imposed by the separate locks
+on the separate CPUs. It might, for example, see:
+
+ *E, LOCK M, LOCK Q, *G, *C, *F, *A, *B, UNLOCK Q, *D, *H, UNLOCK M
+
+But it won't see any of:
+
+ *B, *C or *D preceding LOCK M
+ *A, *B or *C following UNLOCK M
+ *F, *G or *H preceding LOCK Q
+ *E, *F or *G following UNLOCK Q
+
+
+However, if the following occurs:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ *A = a;
+ LOCK M [1]
+ *B = b;
+ *C = c;
+ UNLOCK M [1]
+ *D = d; *E = e;
+ LOCK M [2]
+ *F = f;
+ *G = g;
+ UNLOCK M [2]
+ *H = h;
+
+CPU #3 might see:
+
+ *E, LOCK M [1], *C, *B, *A, UNLOCK M [1],
+ LOCK M [2], *H, *F, *G, UNLOCK M [2], *D
+
+But assuming CPU #1 gets the lock first, it won't see any of:
+
+ *B, *C, *D, *F, *G or *H preceding LOCK M [1]
+ *A, *B or *C following UNLOCK M [1]
+ *F, *G or *H preceding LOCK M [2]
+ *A, *B, *C, *E, *F or *G following UNLOCK M [2]
+
+
+LOCKS VS I/O ACCESSES
+---------------------
+
+Under certain circumstances (especially involving NUMA), I/O accesses within
+two spinlocked sections on two different CPUs may be seen as interleaved by the
+PCI bridge, because the PCI bridge does not necessarily participate in the
+cache-coherence protocol, and is therefore incapable of issuing the required
+read memory barriers.
+
+For example:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ spin_lock(Q)
+ writel(0, ADDR)
+ writel(1, DATA);
+ spin_unlock(Q);
+ spin_lock(Q);
+ writel(4, ADDR);
+ writel(5, DATA);
+ spin_unlock(Q);
+
+may be seen by the PCI bridge as follows:
+
+ STORE *ADDR = 0, STORE *ADDR = 4, STORE *DATA = 1, STORE *DATA = 5
+
+which would probably cause the hardware to malfunction.
+
+
+What is necessary here is to intervene with an mmiowb() before dropping the
+spinlock, for example:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ spin_lock(Q)
+ writel(0, ADDR)
+ writel(1, DATA);
+ mmiowb();
+ spin_unlock(Q);
+ spin_lock(Q);
+ writel(4, ADDR);
+ writel(5, DATA);
+ mmiowb();
+ spin_unlock(Q);
+
+this will ensure that the two stores issued on CPU #1 appear at the PCI bridge
+before either of the stores issued on CPU #2.
+
+
+Furthermore, following a store by a load to the same device obviates the need
+for an mmiowb(), because the load forces the store to complete before the load
+is performed:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ spin_lock(Q)
+ writel(0, ADDR)
+ a = readl(DATA);
+ spin_unlock(Q);
+ spin_lock(Q);
+ writel(4, ADDR);
+ b = readl(DATA);
+ spin_unlock(Q);
+
+
+See Documentation/DocBook/deviceiobook.tmpl for more information.
+
+
+=================================
+WHERE ARE MEMORY BARRIERS NEEDED?
+=================================
+
+Under normal operation, memory operation reordering is generally not going to
+be a problem as a single-threaded linear piece of code will still appear to
+work correctly, even if it's in an SMP kernel. There are, however, three
+circumstances in which reordering definitely _could_ be a problem:
+
+ (*) Interprocessor interaction.
+
+ (*) Atomic operations.
+
+ (*) Accessing devices (I/O).
+
+ (*) Interrupts.
+
+
+INTERPROCESSOR INTERACTION
+--------------------------
+
+When there's a system with more than one processor, more than one CPU in the
+system may be working on the same data set at the same time. This can cause
+synchronisation problems, and the usual way of dealing with them is to use
+locks. Locks, however, are quite expensive, and so it may be preferable to
+operate without the use of a lock if at all possible. In such a case
+operations that affect both CPUs may have to be carefully ordered to prevent
+a malfunction.
+
+Consider, for example, the R/W semaphore slow path. Here a waiting process is
+queued on the semaphore, by virtue of it having a piece of its stack linked to
+the semaphore's list of waiting processes:
+
+ struct rw_semaphore {
+ ...
+ spinlock_t lock;
+ struct list_head waiters;
+ };
+
+ struct rwsem_waiter {
+ struct list_head list;
+ struct task_struct *task;
+ };
+
+To wake up a particular waiter, the up_read() or up_write() functions have to:
+
+ (1) read the next pointer from this waiter's record to know as to where the
+ next waiter record is;
+
+ (4) read the pointer to the waiter's task structure;
+
+ (3) clear the task pointer to tell the waiter it has been given the semaphore;
+
+ (4) call wake_up_process() on the task; and
+
+ (5) release the reference held on the waiter's task struct.
+
+In otherwords, it has to perform this sequence of events:
+
+ LOAD waiter->list.next;
+ LOAD waiter->task;
+ STORE waiter->task;
+ CALL wakeup
+ RELEASE task
+
+and if any of these steps occur out of order, then the whole thing may
+malfunction.
+
+Once it has queued itself and dropped the semaphore lock, the waiter does not
+get the lock again; it instead just waits for its task pointer to be cleared
+before proceeding. Since the record is on the waiter's stack, this means that
+if the task pointer is cleared _before_ the next pointer in the list is read,
+another CPU might start processing the waiter and might clobber the waiter's
+stack before the up*() function has a chance to read the next pointer.
+
+Consider then what might happen to the above sequence of events:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ down_xxx()
+ Queue waiter
+ Sleep
+ up_yyy()
+ LOAD waiter->task;
+ STORE waiter->task;
+ Woken up by other event
+
+ Resume processing
+ down_xxx() returns
+ call foo()
+ foo() clobbers *waiter
+
+ LOAD waiter->list.next;
+ --- OOPS ---
+
+This could be dealt with using the semaphore lock, but then the down_xxx()
+function has to needlessly get the spinlock again after being woken up.
+
+The way to deal with this is to insert a general SMP memory barrier:
+
+ LOAD waiter->list.next;
+ LOAD waiter->task;
+ smp_mb();
+ STORE waiter->task;
+ CALL wakeup
+ RELEASE task
+
+In this case, the barrier makes a guarantee that all memory accesses before the
+barrier will appear to happen before all the memory accesses after the barrier
+with respect to the other CPUs on the system. It does _not_ guarantee that all
+the memory accesses before the barrier will be complete by the time the barrier
+instruction itself is complete.
+
+On a UP system - where this wouldn't be a problem - the smp_mb() is just a
+compiler barrier, thus making sure the compiler emits the instructions in the
+right order without actually intervening in the CPU. Since there there's only
+one CPU, that CPU's dependency ordering logic will take care of everything
+else.
+
+
+ATOMIC OPERATIONS
+-----------------
+
+Though they are technically interprocessor interaction considerations, atomic
+operations are noted specially as they do _not_ generally imply memory
+barriers. The possible offenders include:
+
+ xchg();
+ cmpxchg();
+ test_and_set_bit();
+ test_and_clear_bit();
+ test_and_change_bit();
+ atomic_cmpxchg();
+ atomic_inc_return();
+ atomic_dec_return();
+ atomic_add_return();
+ atomic_sub_return();
+ atomic_inc_and_test();
+ atomic_dec_and_test();
+ atomic_sub_and_test();
+ atomic_add_negative();
+ atomic_add_unless();
+
+These may be used for such things as implementing LOCK operations or controlling
+the lifetime of objects by decreasing their reference counts. In such cases
+they need preceding memory barriers.
+
+The following may also be possible offenders as they may be used as UNLOCK
+operations.
+
+ set_bit();
+ clear_bit();
+ change_bit();
+ atomic_set();
+
+
+The following are a little tricky:
+
+ atomic_add();
+ atomic_sub();
+ atomic_inc();
+ atomic_dec();
+
+If they're used for statistics generation, then they probably don't need memory
+barriers, unless there's a coupling between statistical data.
+
+If they're used for reference counting on an object to control its lifetime,
+they probably don't need memory barriers because either the reference count
+will be adjusted inside a locked section, or the caller will already hold
+sufficient references to make the lock, and thus a memory barrier unnecessary.
+
+If they're used for constructing a lock of some description, then they probably
+do need memory barriers as a lock primitive generally has to do things in a
+specific order.
+
+
+Basically, each usage case has to be carefully considered as to whether memory
+barriers are needed or not. The simplest rule is probably: if the atomic
+operation is protected by a lock, then it does not require a barrier unless
+there's another operation within the critical section with respect to which an
+ordering must be maintained.
+
+See Documentation/atomic_ops.txt for more information.
+
+
+ACCESSING DEVICES
+-----------------
+
+Many devices can be memory mapped, and so appear to the CPU as if they're just
+a set of memory locations. To control such a device, the driver usually has to
+make the right memory accesses in exactly the right order.
+
+However, having a clever CPU or a clever compiler creates a potential problem
+in that the carefully sequenced accesses in the driver code won't reach the
+device in the requisite order if the CPU or the compiler thinks it is more
+efficient to reorder, combine or merge accesses - something that would cause
+the device to malfunction.
+
+Inside of the Linux kernel, I/O should be done through the appropriate accessor
+routines - such as inb() or writel() - which know how to make such accesses
+appropriately sequential. Whilst this, for the most part, renders the explicit
+use of memory barriers unnecessary, there are a couple of situations where they
+might be needed:
+
+ (1) On some systems, I/O stores are not strongly ordered across all CPUs, and
+ so for _all_ general drivers locks should be used and mmiowb() must be
+ issued prior to unlocking the critical section.
+
+ (2) If the accessor functions are used to refer to an I/O memory window with
+ relaxed memory access properties, then _mandatory_ memory barriers are
+ required to enforce ordering.
+
+See Documentation/DocBook/deviceiobook.tmpl for more information.
+
+
+INTERRUPTS
+----------
+
+A driver may be interrupted by its own interrupt service routine, and thus the
+two parts of the driver may interfere with each other's attempts to control or
+access the device.
+
+This may be alleviated - at least in part - by disabling local interrupts (a
+form of locking), such that the critical operations are all contained within
+the interrupt-disabled section in the driver. Whilst the driver's interrupt
+routine is executing, the driver's core may not run on the same CPU, and its
+interrupt is not permitted to happen again until the current interrupt has been
+handled, thus the interrupt handler does not need to lock against that.
+
+However, consider a driver that was talking to an ethernet card that sports an
+address register and a data register. If that driver's core talks to the card
+under interrupt-disablement and then the driver's interrupt handler is invoked:
+
+ LOCAL IRQ DISABLE
+ writew(ADDR, 3);
+ writew(DATA, y);
+ LOCAL IRQ ENABLE
+
+ writew(ADDR, 4);
+ q = readw(DATA);
+
+
+The store to the data register might happen after the second store to the
+address register if ordering rules are sufficiently relaxed:
+
+ STORE *ADDR = 3, STORE *ADDR = 4, STORE *DATA = y, q = LOAD *DATA
+
+
+If ordering rules are relaxed, it must be assumed that accesses done inside an
+interrupt disabled section may leak outside of it and may interleave with
+accesses performed in an interrupt - and vice versa - unless implicit or
+explicit barriers are used.
+
+Normally this won't be a problem because the I/O accesses done inside such
+sections will include synchronous load operations on strictly ordered I/O
+registers that form implicit I/O barriers. If this isn't sufficient then an
+mmiowb() may need to be used explicitly.
+
+
+A similar situation may occur between an interrupt routine and two routines
+running on separate CPUs that communicate with each other. If such a case is
+likely, then interrupt-disabling locks should be used to guarantee ordering.
+
+
+==========================
+KERNEL I/O BARRIER EFFECTS
+==========================
+
+When accessing I/O memory, drivers should use the appropriate accessor
+functions:
+
+ (*) inX(), outX():
+
+ These are intended to talk to I/O space rather than memory space, but
+ that's primarily a CPU-specific concept. The i386 and x86_64 processors do
+ indeed have special I/O space access cycles and instructions, but many
+ CPUs don't have such a concept.
+
+ The PCI bus, amongst others, defines an I/O space concept - which on such
+ CPUs as i386 and x86_64 cpus readily maps to the CPU's concept of I/O
+ space. However, it may also mapped as a virtual I/O space in the CPU's
+ memory map, particularly on those CPUs that don't support alternate
+ I/O spaces.
+
+ Accesses to this space may be fully synchronous (as on i386), but
+ intermediary bridges (such as the PCI host bridge) may not fully honour
+ that.
+
+ They are guaranteed to be fully ordered with respect to each other.
+
+ They are not guaranteed to be fully ordered with respect to other types of
+ memory and I/O operation.
+
+ (*) readX(), writeX():
+
+ Whether these are guaranteed to be fully ordered and uncombined with
+ respect to each other on the issuing CPU depends on the characteristics
+ defined for the memory window through which they're accessing. On later
+ i386 architecture machines, for example, this is controlled by way of the
+ MTRR registers.
+
+ Ordinarily, these will be guaranteed to be fully ordered and uncombined,,
+ provided they're not accessing a prefetchable device.
+
+ However, intermediary hardware (such as a PCI bridge) may indulge in
+ deferral if it so wishes; to flush a store, a load from the same location
+ is preferred[*], but a load from the same device or from configuration
+ space should suffice for PCI.
+
+ [*] NOTE! attempting to load from the same location as was written to may
+ cause a malfunction - consider the 16550 Rx/Tx serial registers for
+ example.
+
+ Used with prefetchable I/O memory, an mmiowb() barrier may be required to
+ force stores to be ordered.
+
+ Please refer to the PCI specification for more information on interactions
+ between PCI transactions.
+
+ (*) readX_relaxed()
+
+ These are similar to readX(), but are not guaranteed to be ordered in any
+ way. Be aware that there is no I/O read barrier available.
+
+ (*) ioreadX(), iowriteX()
+
+ These will perform as appropriate for the type of access they're actually
+ doing, be it inX()/outX() or readX()/writeX().
+
+
+========================================
+ASSUMED MINIMUM EXECUTION ORDERING MODEL
+========================================
+
+It has to be assumed that the conceptual CPU is weakly-ordered but that it will
+maintain the appearance of program causality with respect to itself. Some CPUs
+(such as i386 or x86_64) are more constrained than others (such as powerpc or
+frv), and so the most relaxed case (namely DEC Alpha) must be assumed outside
+of arch-specific code.
+
+This means that it must be considered that the CPU will execute its instruction
+stream in any order it feels like - or even in parallel - provided that if an
+instruction in the stream depends on the an earlier instruction, then that
+earlier instruction must be sufficiently complete[*] before the later
+instruction may proceed; in other words: provided that the appearance of
+causality is maintained.
+
+ [*] Some instructions have more than one effect - such as changing the
+ condition codes, changing registers or changing memory - and different
+ instructions may depend on different effects.
+
+A CPU may also discard any instruction sequence that winds up having no
+ultimate effect. For example, if two adjacent instructions both load an
+immediate value into the same register, the first may be discarded.
+
+
+Similarly, it has to be assumed that compiler might reorder the instruction
+stream in any way it sees fit, again provided the appearance of causality is
+maintained.
+
+
+============================
+THE EFFECTS OF THE CPU CACHE
+============================
+
+The way cached memory operations are perceived across the system is affected to
+a certain extent by the caches that lie between CPUs and memory, and by the
+memory coherence system that maintains the consistency of state in the system.
+
+As far as the way a CPU interacts with another part of the system through the
+caches goes, the memory system has to include the CPU's caches, and memory
+barriers for the most part act at the interface between the CPU and its cache
+(memory barriers logically act on the dotted line in the following diagram):
+
+ <--- CPU ---> : <----------- Memory ----------->
+ :
+ +--------+ +--------+ : +--------+ +-----------+
+ | | | | : | | | | +--------+
+ | CPU | | Memory | : | CPU | | | | |
+ | Core |--->| Access |----->| Cache |<-->| | | |
+ | | | Queue | : | | | |--->| Memory |
+ | | | | : | | | | | |
+ +--------+ +--------+ : +--------+ | | | |
+ : | Cache | +--------+
+ : | Coherency |
+ : | Mechanism | +--------+
+ +--------+ +--------+ : +--------+ | | | |
+ | | | | : | | | | | |
+ | CPU | | Memory | : | CPU | | |--->| Device |
+ | Core |--->| Access |----->| Cache |<-->| | | |
+ | | | Queue | : | | | | | |
+ | | | | : | | | | +--------+
+ +--------+ +--------+ : +--------+ +-----------+
+ :
+ :
+
+Although any particular load or store may not actually appear outside of the
+CPU that issued it since it may have been satisfied within the CPU's own cache,
+it will still appear as if the full memory access had taken place as far as the
+other CPUs are concerned since the cache coherency mechanisms will migrate the
+cacheline over to the accessing CPU and propagate the effects upon conflict.
+
+The CPU core may execute instructions in any order it deems fit, provided the
+expected program causality appears to be maintained. Some of the instructions
+generate load and store operations which then go into the queue of memory
+accesses to be performed. The core may place these in the queue in any order
+it wishes, and continue execution until it is forced to wait for an instruction
+to complete.
+
+What memory barriers are concerned with is controlling the order in which
+accesses cross from the CPU side of things to the memory side of things, and
+the order in which the effects are perceived to happen by the other observers
+in the system.
+
+[!] Memory barriers are _not_ needed within a given CPU, as CPUs always see
+their own loads and stores as if they had happened in program order.
+
+[!] MMIO or other device accesses may bypass the cache system. This depends on
+the properties of the memory window through which devices are accessed and/or
+the use of any special device communication instructions the CPU may have.
+
+
+CACHE COHERENCY
+---------------
+
+Life isn't quite as simple as it may appear above, however: for while the
+caches are expected to be coherent, there's no guarantee that that coherency
+will be ordered. This means that whilst changes made on one CPU will
+eventually become visible on all CPUs, there's no guarantee that they will
+become apparent in the same order on those other CPUs.
+
+
+Consider dealing with a system that has pair of CPUs (1 & 2), each of which has
+a pair of parallel data caches (CPU 1 has A/B, and CPU 2 has C/D):
+
+ :
+ : +--------+
+ : +---------+ | |
+ +--------+ : +--->| Cache A |<------->| |
+ | | : | +---------+ | |
+ | CPU 1 |<---+ | |
+ | | : | +---------+ | |
+ +--------+ : +--->| Cache B |<------->| |
+ : +---------+ | |
+ : | Memory |
+ : +---------+ | System |
+ +--------+ : +--->| Cache C |<------->| |
+ | | : | +---------+ | |
+ | CPU 2 |<---+ | |
+ | | : | +---------+ | |
+ +--------+ : +--->| Cache D |<------->| |
+ : +---------+ | |
+ : +--------+
+ :
+
+Imagine the system has the following properties:
+
+ (*) an odd-numbered cache line may be in cache A, cache C or it may still be
+ resident in memory;
+
+ (*) an even-numbered cache line may be in cache B, cache D or it may still be
+ resident in memory;
+
+ (*) whilst the CPU core is interrogating one cache, the other cache may be
+ making use of the bus to access the rest of the system - perhaps to
+ displace a dirty cacheline or to do a speculative load;
+
+ (*) each cache has a queue of operations that need to be applied to that cache
+ to maintain coherency with the rest of the system;
+
+ (*) the coherency queue is not flushed by normal loads to lines already
+ present in the cache, even though the contents of the queue may
+ potentially effect those loads.
+
+Imagine, then, that two writes are made on the first CPU, with a write barrier
+between them to guarantee that they will appear to reach that CPU's caches in
+the requisite order:
+
+ CPU 1 CPU 2 COMMENT
+ =============== =============== =======================================
+ u == 0, v == 1 and p == &u, q == &u
+ v = 2;
+ smp_wmb(); Make sure change to v visible before
+ change to p
+ v is now in cache A exclusively
+ p = &v;
+ p is now in cache B exclusively
+
+The write memory barrier forces the other CPUs in the system to perceive that
+the local CPU's caches have apparently been updated in the correct order. But
+now imagine that the second CPU that wants to read those values:
+
+ CPU 1 CPU 2 COMMENT
+ =============== =============== =======================================
+ ...
+ q = p;
+ x = *q;
+
+The above pair of reads may then fail to happen in expected order, as the
+cacheline holding p may get updated in one of the second CPU's caches whilst
+the update to the cacheline holding v is delayed in the other of the second
+CPU's caches by some other cache event:
+
+ CPU 1 CPU 2 COMMENT
+ =============== =============== =======================================
+ u == 0, v == 1 and p == &u, q == &u
+ v = 2;
+ smp_wmb();
+
+
+ p = &b; q = p;
+
+
+
+ x = *q;
+ Reads from v before v updated in cache
+
+
+
+Basically, whilst both cachelines will be updated on CPU 2 eventually, there's
+no guarantee that, without intervention, the order of update will be the same
+as that committed on CPU 1.
+
+
+To intervene, we need to interpolate a data dependency barrier or a read
+barrier between the loads. This will force the cache to commit its coherency
+queue before processing any further requests:
+
+ CPU 1 CPU 2 COMMENT
+ =============== =============== =======================================
+ u == 0, v == 1 and p == &u, q == &u
+ v = 2;
+ smp_wmb();
+
+
+ p = &b; q = p;
+
+
+
+ smp_read_barrier_depends()
+
+
+ x = *q;
+ Reads from v after v updated in cache
+
+
+This sort of problem can be encountered on DEC Alpha processors as they have a
+split cache that improves performance by making better use of the data bus.
+Whilst most CPUs do imply a data dependency barrier on the read when a memory
+access depends on a read, not all do, so it may not be relied on.
+
+Other CPUs may also have split caches, but must coordinate between the various
+cachelets for normal memory accesss. The semantics of the Alpha removes the
+need for coordination in absence of memory barriers.
+
+
+CACHE COHERENCY VS DMA
+----------------------
+
+Not all systems maintain cache coherency with respect to devices doing DMA. In
+such cases, a device attempting DMA may obtain stale data from RAM because
+dirty cache lines may be resident in the caches of various CPUs, and may not
+have been written back to RAM yet. To deal with this, the appropriate part of
+the kernel must flush the overlapping bits of cache on each CPU (and maybe
+invalidate them as well).
+
+In addition, the data DMA'd to RAM by a device may be overwritten by dirty
+cache lines being written back to RAM from a CPU's cache after the device has
+installed its own data, or cache lines simply present in a CPUs cache may
+simply obscure the fact that RAM has been updated, until at such time as the
+cacheline is discarded from the CPU's cache and reloaded. To deal with this,
+the appropriate part of the kernel must invalidate the overlapping bits of the
+cache on each CPU.
+
+See Documentation/cachetlb.txt for more information on cache management.
+
+
+CACHE COHERENCY VS MMIO
+-----------------------
+
+Memory mapped I/O usually takes place through memory locations that are part of
+a window in the CPU's memory space that have different properties assigned than
+the usual RAM directed window.
+
+Amongst these properties is usually the fact that such accesses bypass the
+caching entirely and go directly to the device buses. This means MMIO accesses
+may, in effect, overtake accesses to cached memory that were emitted earlier.
+A memory barrier isn't sufficient in such a case, but rather the cache must be
+flushed between the cached memory write and the MMIO access if the two are in
+any way dependent.
+
+
+=========================
+THE THINGS CPUS GET UP TO
+=========================
+
+A programmer might take it for granted that the CPU will perform memory
+operations in exactly the order specified, so that if a CPU is, for example,
+given the following piece of code to execute:
+
+ a = *A;
+ *B = b;
+ c = *C;
+ d = *D;
+ *E = e;
+
+They would then expect that the CPU will complete the memory operation for each
+instruction before moving on to the next one, leading to a definite sequence of
+operations as seen by external observers in the system:
+
+ LOAD *A, STORE *B, LOAD *C, LOAD *D, STORE *E.
+
+
+Reality is, of course, much messier. With many CPUs and compilers, the above
+assumption doesn't hold because:
+
+ (*) loads are more likely to need to be completed immediately to permit
+ execution progress, whereas stores can often be deferred without a
+ problem;
+
+ (*) loads may be done speculatively, and the result discarded should it prove
+ to have been unnecessary;
+
+ (*) loads may be done speculatively, leading to the result having being
+ fetched at the wrong time in the expected sequence of events;
+
+ (*) the order of the memory accesses may be rearranged to promote better use
+ of the CPU buses and caches;
+
+ (*) loads and stores may be combined to improve performance when talking to
+ memory or I/O hardware that can do batched accesses of adjacent locations,
+ thus cutting down on transaction setup costs (memory and PCI devices may
+ both be able to do this); and
+
+ (*) the CPU's data cache may affect the ordering, and whilst cache-coherency
+ mechanisms may alleviate this - once the store has actually hit the cache
+ - there's no guarantee that the coherency management will be propagated in
+ order to other CPUs.
+
+So what another CPU, say, might actually observe from the above piece of code
+is:
+
+ LOAD *A, ..., LOAD {*C,*D}, STORE *E, STORE *B
+
+ (Where "LOAD {*C,*D}" is a combined load)
+
+
+However, it is guaranteed that a CPU will be self-consistent: it will see its
+_own_ accesses appear to be correctly ordered, without the need for a memory
+barrier. For instance with the following code:
+
+ U = *A;
+ *A = V;
+ *A = W;
+ X = *A;
+ *A = Y;
+ Z = *A;
+
+and assuming no intervention by an external influence, it can be assumed that
+the final result will appear to be:
+
+ U == the original value of *A
+ X == W
+ Z == Y
+ *A == Y
+
+The code above may cause the CPU to generate the full sequence of memory
+accesses:
+
+ U=LOAD *A, STORE *A=V, STORE *A=W, X=LOAD *A, STORE *A=Y, Z=LOAD *A
+
+in that order, but, without intervention, the sequence may have almost any
+combination of elements combined or discarded, provided the program's view of
+the world remains consistent.
+
+The compiler may also combine, discard or defer elements of the sequence before
+the CPU even sees them.
+
+For instance:
+
+ *A = V;
+ *A = W;
+
+may be reduced to:
+
+ *A = W;
+
+since, without a write barrier, it can be assumed that the effect of the
+storage of V to *A is lost. Similarly:
+
+ *A = Y;
+ Z = *A;
+
+may, without a memory barrier, be reduced to:
+
+ *A = Y;
+ Z = Y;
+
+and the LOAD operation never appear outside of the CPU.
+
+
+AND THEN THERE'S THE ALPHA
+--------------------------
+
+The DEC Alpha CPU is one of the most relaxed CPUs there is. Not only that,
+some versions of the Alpha CPU have a split data cache, permitting them to have
+two semantically related cache lines updating at separate times. This is where
+the data dependency barrier really becomes necessary as this synchronises both
+caches with the memory coherence system, thus making it seem like pointer
+changes vs new data occur in the right order.
+
+The Alpha defines the Linux's kernel's memory barrier model.
+
+See the subsection on "Cache Coherency" above.
+
+
+==========
+REFERENCES
+==========
+
+Alpha AXP Architecture Reference Manual, Second Edition (Sites & Witek,
+Digital Press)
+ Chapter 5.2: Physical Address Space Characteristics
+ Chapter 5.4: Caches and Write Buffers
+ Chapter 5.5: Data Sharing
+ Chapter 5.6: Read/Write Ordering
+
+AMD64 Architecture Programmer's Manual Volume 2: System Programming
+ Chapter 7.1: Memory-Access Ordering
+ Chapter 7.4: Buffering and Combining Memory Writes
+
+IA-32 Intel Architecture Software Developer's Manual, Volume 3:
+System Programming Guide
+ Chapter 7.1: Locked Atomic Operations
+ Chapter 7.2: Memory Ordering
+ Chapter 7.4: Serializing Instructions
+
+The SPARC Architecture Manual, Version 9
+ Chapter 8: Memory Models
+ Appendix D: Formal Specification of the Memory Models
+ Appendix J: Programming with the Memory Models
+
+UltraSPARC Programmer Reference Manual
+ Chapter 5: Memory Accesses and Cacheability
+ Chapter 15: Sparc-V9 Memory Models
+
+UltraSPARC III Cu User's Manual
+ Chapter 9: Memory Models
+
+UltraSPARC IIIi Processor User's Manual
+ Chapter 8: Memory Models
+
+UltraSPARC Architecture 2005
+ Chapter 9: Memory
+ Appendix D: Formal Specifications of the Memory Models
+
+UltraSPARC T1 Supplement to the UltraSPARC Architecture 2005
+ Chapter 8: Memory Models
+ Appendix F: Caches and Cache Coherency
+
+Solaris Internals, Core Kernel Architecture, p63-68:
+ Chapter 3.3: Hardware Considerations for Locks and
+ Synchronization
+
+Unix Systems for Modern Architectures, Symmetric Multiprocessing and Caching
+for Kernel Programmers:
+ Chapter 13: Other Memory Models
+
+Intel Itanium Architecture Software Developer's Manual: Volume 1:
+ Section 2.6: Speculation
+ Section 4.4: Memory Access
diff --git a/trunk/Documentation/networking/TODO b/trunk/Documentation/networking/TODO
deleted file mode 100644
index 66d36ff14bae..000000000000
--- a/trunk/Documentation/networking/TODO
+++ /dev/null
@@ -1,18 +0,0 @@
-To-do items for network drivers
--------------------------------
-
-* Move ethernet crc routine to generic code
-
-* (for 2.5) Integrate Jamal Hadi Salim's netdev Rx polling API change
-
-* Audit all net drivers to make sure magic packet / wake-on-lan /
- similar features are disabled in the driver by default.
-
-* Audit all net drivers to make sure the module always prints out a
- version string when loaded as a module, but only prints a version
- string when built into the kernel if a device is detected.
-
-* Add ETHTOOL_GDRVINFO ioctl support to all ethernet drivers.
-
-* dmfe PCI DMA is totally wrong and only works on x86
-
diff --git a/trunk/Documentation/networking/bcm43xx.txt b/trunk/Documentation/networking/bcm43xx.txt
new file mode 100644
index 000000000000..28541d2bee1e
--- /dev/null
+++ b/trunk/Documentation/networking/bcm43xx.txt
@@ -0,0 +1,36 @@
+
+ BCM43xx Linux Driver Project
+ ============================
+
+About this software
+-------------------
+
+The goal of this project is to develop a linux driver for Broadcom
+BCM43xx chips, based on the specification at
+http://bcm-specs.sipsolutions.net/
+
+The project page is http://bcm43xx.berlios.de/
+
+
+Requirements
+------------
+
+1) Linux Kernel 2.6.16 or later
+ http://www.kernel.org/
+
+ You may want to configure your kernel with:
+
+ CONFIG_DEBUG_FS (optional):
+ -> Kernel hacking
+ -> Debug Filesystem
+
+2) SoftMAC IEEE 802.11 Networking Stack extension and patched ieee80211
+ modules:
+ http://softmac.sipsolutions.net/
+
+3) Firmware Files
+
+ Please try fwcutter. Fwcutter can extract the firmware from various
+ binary driver files. It supports driver files from Windows, MacOS and
+ Linux. You can get fwcutter from http://bcm43xx.berlios.de/.
+ Also, fwcutter comes with a README file for further instructions.
diff --git a/trunk/Documentation/powerpc/booting-without-of.txt b/trunk/Documentation/powerpc/booting-without-of.txt
index ee551c6ea235..217e51768b87 100644
--- a/trunk/Documentation/powerpc/booting-without-of.txt
+++ b/trunk/Documentation/powerpc/booting-without-of.txt
@@ -719,6 +719,11 @@ address which can extend beyond that limit.
- model : this is your board name/model
- #address-cells : address representation for "root" devices
- #size-cells: the size representation for "root" devices
+ - device_type : This property shouldn't be necessary. However, if
+ you decide to create a device_type for your root node, make sure it
+ is _not_ "chrp" unless your platform is a pSeries or PAPR compliant
+ one for 64-bit, or a CHRP-type machine for 32-bit as this will
+ matched by the kernel this way.
Additionally, some recommended properties are:
diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
index e5b051f0e27e..c9465811addc 100644
--- a/trunk/MAINTAINERS
+++ b/trunk/MAINTAINERS
@@ -1885,6 +1885,7 @@ NETWORKING [GENERAL]
P: Networking Team
M: netdev@vger.kernel.org
L: netdev@vger.kernel.org
+W: http://linux-net.osdl.org/
S: Maintained
NETWORKING [IPv4/IPv6]
diff --git a/trunk/arch/alpha/kernel/alpha_ksyms.c b/trunk/arch/alpha/kernel/alpha_ksyms.c
index 1898ea79d0e2..9d6186d50245 100644
--- a/trunk/arch/alpha/kernel/alpha_ksyms.c
+++ b/trunk/arch/alpha/kernel/alpha_ksyms.c
@@ -216,8 +216,6 @@ EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(get_wchan);
-
#ifdef CONFIG_ALPHA_IRONGATE
EXPORT_SYMBOL(irongate_ioremap);
EXPORT_SYMBOL(irongate_iounmap);
diff --git a/trunk/arch/alpha/kernel/core_marvel.c b/trunk/arch/alpha/kernel/core_marvel.c
index 44866cb26a80..7f6a98455e74 100644
--- a/trunk/arch/alpha/kernel/core_marvel.c
+++ b/trunk/arch/alpha/kernel/core_marvel.c
@@ -435,7 +435,7 @@ marvel_specify_io7(char *str)
str = pchar;
} while(*str);
- return 0;
+ return 1;
}
__setup("io7=", marvel_specify_io7);
diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig
index ba46d779ede7..dc5a9332c915 100644
--- a/trunk/arch/arm/Kconfig
+++ b/trunk/arch/arm/Kconfig
@@ -77,6 +77,14 @@ config FIQ
config ARCH_MTD_XIP
bool
+config VECTORS_BASE
+ hex
+ default 0xffff0000 if MMU
+ default DRAM_BASE if REMAP_VECTORS_TO_RAM
+ default 0x00000000
+ help
+ The base address of exception vectors.
+
source "init/Kconfig"
menu "System Type"
@@ -839,6 +847,8 @@ source "drivers/misc/Kconfig"
source "drivers/mfd/Kconfig"
+source "drivers/leds/Kconfig"
+
source "drivers/media/Kconfig"
source "drivers/video/Kconfig"
diff --git a/trunk/arch/arm/Kconfig-nommu b/trunk/arch/arm/Kconfig-nommu
new file mode 100644
index 000000000000..e1574be2ded6
--- /dev/null
+++ b/trunk/arch/arm/Kconfig-nommu
@@ -0,0 +1,44 @@
+#
+# Kconfig for uClinux(non-paged MM) depend configurations
+# Hyok S. Choi
+#
+
+config SET_MEM_PARAM
+ bool "Set flash/sdram size and base addr"
+ help
+ Say Y to manually set the base addresses and sizes.
+ otherwise, the default values are assigned.
+
+config DRAM_BASE
+ hex '(S)DRAM Base Address' if SET_MEM_PARAM
+ default 0x00800000
+
+config DRAM_SIZE
+ hex '(S)DRAM SIZE' if SET_MEM_PARAM
+ default 0x00800000
+
+config FLASH_MEM_BASE
+ hex 'FLASH Base Address' if SET_MEM_PARAM
+ default 0x00400000
+
+config FLASH_SIZE
+ hex 'FLASH Size' if SET_MEM_PARAM
+ default 0x00400000
+
+config REMAP_VECTORS_TO_RAM
+ bool 'Install vectors to the begining of RAM' if DRAM_BASE
+ depends on DRAM_BASE
+ help
+ The kernel needs to change the hardware exception vectors.
+ In nommu mode, the hardware exception vectors are normally
+ placed at address 0x00000000. However, this region may be
+ occupied by read-only memory depending on H/W design.
+
+ If the region contains read-write memory, say 'n' here.
+
+ If your CPU provides a remap facility which allows the exception
+ vectors to be mapped to writable memory, say 'n' here.
+
+ Otherwise, say 'y' here. In this case, the kernel will require
+ external support to redirect the hardware exception vectors to
+ the writable versions located at DRAM_BASE.
diff --git a/trunk/arch/arm/Makefile b/trunk/arch/arm/Makefile
index ce3e804ea0f3..95a96275f88a 100644
--- a/trunk/arch/arm/Makefile
+++ b/trunk/arch/arm/Makefile
@@ -20,6 +20,11 @@ GZFLAGS :=-9
# Select a platform tht is kept up-to-date
KBUILD_DEFCONFIG := versatile_defconfig
+# defines filename extension depending memory manement type.
+ifeq ($(CONFIG_MMU),)
+MMUEXT := -nommu
+endif
+
ifeq ($(CONFIG_FRAME_POINTER),y)
CFLAGS +=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
endif
@@ -73,7 +78,7 @@ AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
CHECKFLAGS += -D__arm__
#Default value
-head-y := arch/arm/kernel/head.o arch/arm/kernel/init_task.o
+head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
textofs-y := 0x00008000
machine-$(CONFIG_ARCH_RPC) := rpc
@@ -133,7 +138,7 @@ else
MACHINE :=
endif
-export TEXT_OFFSET GZFLAGS
+export TEXT_OFFSET GZFLAGS MMUEXT
# Do we have FASTFPE?
FASTFPE :=arch/arm/fastfpe
diff --git a/trunk/arch/arm/boot/compressed/head.S b/trunk/arch/arm/boot/compressed/head.S
index 491c7e4c9ac6..b56f5e691d65 100644
--- a/trunk/arch/arm/boot/compressed/head.S
+++ b/trunk/arch/arm/boot/compressed/head.S
@@ -2,6 +2,7 @@
* linux/arch/arm/boot/compressed/head.S
*
* Copyright (C) 1996-2002 Russell King
+ * Copyright (C) 2004 Hyok S. Choi (MPU support)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -320,6 +321,62 @@ params: ldr r0, =params_phys
cache_on: mov r3, #8 @ cache_on function
b call_cache_fn
+/*
+ * Initialize the highest priority protection region, PR7
+ * to cover all 32bit address and cacheable and bufferable.
+ */
+__armv4_mpu_cache_on:
+ mov r0, #0x3f @ 4G, the whole
+ mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
+ mcr p15, 0, r0, c6, c7, 1
+
+ mov r0, #0x80 @ PR7
+ mcr p15, 0, r0, c2, c0, 0 @ D-cache on
+ mcr p15, 0, r0, c2, c0, 1 @ I-cache on
+ mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
+
+ mov r0, #0xc000
+ mcr p15, 0, r0, c5, c0, 1 @ I-access permission
+ mcr p15, 0, r0, c5, c0, 0 @ D-access permission
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
+ mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ @ ...I .... ..D. WC.M
+ orr r0, r0, #0x002d @ .... .... ..1. 11.1
+ orr r0, r0, #0x1000 @ ...1 .... .... ....
+
+ mcr p15, 0, r0, c1, c0, 0 @ write control reg
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
+ mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
+ mov pc, lr
+
+__armv3_mpu_cache_on:
+ mov r0, #0x3f @ 4G, the whole
+ mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
+
+ mov r0, #0x80 @ PR7
+ mcr p15, 0, r0, c2, c0, 0 @ cache on
+ mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
+
+ mov r0, #0xc000
+ mcr p15, 0, r0, c5, c0, 0 @ access permission
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ @ .... .... .... WC.M
+ orr r0, r0, #0x000d @ .... .... .... 11.1
+ mov r0, #0
+ mcr p15, 0, r0, c1, c0, 0 @ write control reg
+
+ mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
+ mov pc, lr
+
__setup_mmu: sub r3, r4, #16384 @ Page directory size
bic r3, r3, #0xff @ Align the pointer
bic r3, r3, #0x3f00
@@ -496,6 +553,18 @@ proc_types:
b __armv4_mmu_cache_off
mov pc, lr
+ .word 0x41007400 @ ARM74x
+ .word 0xff00ff00
+ b __armv3_mpu_cache_on
+ b __armv3_mpu_cache_off
+ b __armv3_mpu_cache_flush
+
+ .word 0x41009400 @ ARM94x
+ .word 0xff00ff00
+ b __armv4_mpu_cache_on
+ b __armv4_mpu_cache_off
+ b __armv4_mpu_cache_flush
+
.word 0x00007000 @ ARM7 IDs
.word 0x0000f000
mov pc, lr
@@ -562,6 +631,24 @@ proc_types:
cache_off: mov r3, #12 @ cache_off function
b call_cache_fn
+__armv4_mpu_cache_off:
+ mrc p15, 0, r0, c1, c0
+ bic r0, r0, #0x000d
+ mcr p15, 0, r0, c1, c0 @ turn MPU and cache off
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c7, c6, 0 @ flush D-Cache
+ mcr p15, 0, r0, c7, c5, 0 @ flush I-Cache
+ mov pc, lr
+
+__armv3_mpu_cache_off:
+ mrc p15, 0, r0, c1, c0
+ bic r0, r0, #0x000d
+ mcr p15, 0, r0, c1, c0, 0 @ turn MPU and cache off
+ mov r0, #0
+ mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
+ mov pc, lr
+
__armv4_mmu_cache_off:
mrc p15, 0, r0, c1, c0
bic r0, r0, #0x000d
@@ -601,6 +688,24 @@ cache_clean_flush:
mov r3, #16
b call_cache_fn
+__armv4_mpu_cache_flush:
+ mov r2, #1
+ mov r3, #0
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+ mov r1, #7 << 5 @ 8 segments
+1: orr r3, r1, #63 << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 5
+ bcs 1b @ segments 7 to 0
+
+ teq r2, #0
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+
__armv6_mmu_cache_flush:
mov r1, #0
mcr p15, 0, r1, c7, c14, 0 @ clean+invalidate D
@@ -638,6 +743,7 @@ no_cache_id:
mov pc, lr
__armv3_mmu_cache_flush:
+__armv3_mpu_cache_flush:
mov r1, #0
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
mov pc, lr
diff --git a/trunk/arch/arm/common/sharpsl_pm.c b/trunk/arch/arm/common/sharpsl_pm.c
index 978d32e82d39..3cd8c9ee4510 100644
--- a/trunk/arch/arm/common/sharpsl_pm.c
+++ b/trunk/arch/arm/common/sharpsl_pm.c
@@ -22,6 +22,7 @@
#include
#include
#include
+#include
#include
#include
@@ -75,6 +76,7 @@ static void sharpsl_battery_thread(void *private_);
struct sharpsl_pm_status sharpsl_pm;
DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL);
DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL);
+DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
static int get_percentage(int voltage)
@@ -190,10 +192,10 @@ void sharpsl_pm_led(int val)
dev_err(sharpsl_pm.dev, "Charging Error!\n");
} else if (val == SHARPSL_LED_ON) {
dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
-
+ led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
} else {
dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
-
+ led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
}
}
@@ -786,6 +788,8 @@ static int __init sharpsl_pm_probe(struct platform_device *pdev)
init_timer(&sharpsl_pm.chrg_full_timer);
sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
+ led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
+
sharpsl_pm.machinfo->init();
device_create_file(&pdev->dev, &dev_attr_battery_percentage);
@@ -807,6 +811,8 @@ static int sharpsl_pm_remove(struct platform_device *pdev)
device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
+ led_trigger_unregister_simple(sharpsl_charge_led_trigger);
+
sharpsl_pm.machinfo->exit();
del_timer_sync(&sharpsl_pm.chrg_full_timer);
diff --git a/trunk/arch/arm/kernel/entry-armv.S b/trunk/arch/arm/kernel/entry-armv.S
index 355914ffb192..ab8e600c18c8 100644
--- a/trunk/arch/arm/kernel/entry-armv.S
+++ b/trunk/arch/arm/kernel/entry-armv.S
@@ -666,7 +666,7 @@ __kuser_helper_start:
*
* #define __kernel_dmb() \
* asm volatile ( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #95" \
- * : : : "lr","cc" )
+ * : : : "r0", "lr","cc" )
*/
__kuser_memory_barrier: @ 0xffff0fa0
diff --git a/trunk/arch/arm/kernel/head-common.S b/trunk/arch/arm/kernel/head-common.S
new file mode 100644
index 000000000000..a52da0ddb43d
--- /dev/null
+++ b/trunk/arch/arm/kernel/head-common.S
@@ -0,0 +1,217 @@
+/*
+ * linux/arch/arm/kernel/head-common.S
+ *
+ * Copyright (C) 1994-2002 Russell King
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ .type __switch_data, %object
+__switch_data:
+ .long __mmap_switched
+ .long __data_loc @ r4
+ .long __data_start @ r5
+ .long __bss_start @ r6
+ .long _end @ r7
+ .long processor_id @ r4
+ .long __machine_arch_type @ r5
+ .long cr_alignment @ r6
+ .long init_thread_union + THREAD_START_SP @ sp
+
+/*
+ * The following fragment of code is executed with the MMU on in MMU mode,
+ * and uses absolute addresses; this is not position independent.
+ *
+ * r0 = cp#15 control register
+ * r1 = machine ID
+ * r9 = processor ID
+ */
+ .type __mmap_switched, %function
+__mmap_switched:
+ adr r3, __switch_data + 4
+
+ ldmia r3!, {r4, r5, r6, r7}
+ cmp r4, r5 @ Copy data segment if needed
+1: cmpne r5, r6
+ ldrne fp, [r4], #4
+ strne fp, [r5], #4
+ bne 1b
+
+ mov fp, #0 @ Clear BSS (and zero fp)
+1: cmp r6, r7
+ strcc fp, [r6],#4
+ bcc 1b
+
+ ldmia r3, {r4, r5, r6, sp}
+ str r9, [r4] @ Save processor ID
+ str r1, [r5] @ Save machine type
+ bic r4, r0, #CR_A @ Clear 'A' bit
+ stmia r6, {r0, r4} @ Save control register values
+ b start_kernel
+
+/*
+ * Exception handling. Something went wrong and we can't proceed. We
+ * ought to tell the user, but since we don't have any guarantee that
+ * we're even running on the right architecture, we do virtually nothing.
+ *
+ * If CONFIG_DEBUG_LL is set we try to print out something about the error
+ * and hope for the best (useful if bootloader fails to pass a proper
+ * machine ID for example).
+ */
+
+ .type __error_p, %function
+__error_p:
+#ifdef CONFIG_DEBUG_LL
+ adr r0, str_p1
+ bl printascii
+ b __error
+str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n"
+ .align
+#endif
+
+ .type __error_a, %function
+__error_a:
+#ifdef CONFIG_DEBUG_LL
+ mov r4, r1 @ preserve machine ID
+ adr r0, str_a1
+ bl printascii
+ mov r0, r4
+ bl printhex8
+ adr r0, str_a2
+ bl printascii
+ adr r3, 3f
+ ldmia r3, {r4, r5, r6} @ get machine desc list
+ sub r4, r3, r4 @ get offset between virt&phys
+ add r5, r5, r4 @ convert virt addresses to
+ add r6, r6, r4 @ physical address space
+1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type
+ bl printhex8
+ mov r0, #'\t'
+ bl printch
+ ldr r0, [r5, #MACHINFO_NAME] @ get machine name
+ add r0, r0, r4
+ bl printascii
+ mov r0, #'\n'
+ bl printch
+ add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
+ cmp r5, r6
+ blo 1b
+ adr r0, str_a3
+ bl printascii
+ b __error
+str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x"
+str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
+str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n"
+ .align
+#endif
+
+ .type __error, %function
+__error:
+#ifdef CONFIG_ARCH_RPC
+/*
+ * Turn the screen red on a error - RiscPC only.
+ */
+ mov r0, #0x02000000
+ mov r3, #0x11
+ orr r3, r3, r3, lsl #8
+ orr r3, r3, r3, lsl #16
+ str r3, [r0], #4
+ str r3, [r0], #4
+ str r3, [r0], #4
+ str r3, [r0], #4
+#endif
+1: mov r0, r0
+ b 1b
+
+
+/*
+ * Read processor ID register (CP#15, CR0), and look up in the linker-built
+ * supported processor list. Note that we can't use the absolute addresses
+ * for the __proc_info lists since we aren't running with the MMU on
+ * (and therefore, we are not in the correct address space). We have to
+ * calculate the offset.
+ *
+ * r9 = cpuid
+ * Returns:
+ * r3, r4, r6 corrupted
+ * r5 = proc_info pointer in physical address space
+ * r9 = cpuid (preserved)
+ */
+ .type __lookup_processor_type, %function
+__lookup_processor_type:
+ adr r3, 3f
+ ldmda r3, {r5 - r7}
+ sub r3, r3, r7 @ get offset between virt&phys
+ add r5, r5, r3 @ convert virt addresses to
+ add r6, r6, r3 @ physical address space
+1: ldmia r5, {r3, r4} @ value, mask
+ and r4, r4, r9 @ mask wanted bits
+ teq r3, r4
+ beq 2f
+ add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list)
+ cmp r5, r6
+ blo 1b
+ mov r5, #0 @ unknown processor
+2: mov pc, lr
+
+/*
+ * This provides a C-API version of the above function.
+ */
+ENTRY(lookup_processor_type)
+ stmfd sp!, {r4 - r7, r9, lr}
+ mov r9, r0
+ bl __lookup_processor_type
+ mov r0, r5
+ ldmfd sp!, {r4 - r7, r9, pc}
+
+/*
+ * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
+ * more information about the __proc_info and __arch_info structures.
+ */
+ .long __proc_info_begin
+ .long __proc_info_end
+3: .long .
+ .long __arch_info_begin
+ .long __arch_info_end
+
+/*
+ * Lookup machine architecture in the linker-build list of architectures.
+ * Note that we can't use the absolute addresses for the __arch_info
+ * lists since we aren't running with the MMU on (and therefore, we are
+ * not in the correct address space). We have to calculate the offset.
+ *
+ * r1 = machine architecture number
+ * Returns:
+ * r3, r4, r6 corrupted
+ * r5 = mach_info pointer in physical address space
+ */
+ .type __lookup_machine_type, %function
+__lookup_machine_type:
+ adr r3, 3b
+ ldmia r3, {r4, r5, r6}
+ sub r3, r3, r4 @ get offset between virt&phys
+ add r5, r5, r3 @ convert virt addresses to
+ add r6, r6, r3 @ physical address space
+1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type
+ teq r3, r1 @ matches loader number?
+ beq 2f @ found
+ add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
+ cmp r5, r6
+ blo 1b
+ mov r5, #0 @ unknown machine
+2: mov pc, lr
+
+/*
+ * This provides a C-API version of the above function.
+ */
+ENTRY(lookup_machine_type)
+ stmfd sp!, {r4 - r6, lr}
+ mov r1, r0
+ bl __lookup_machine_type
+ mov r0, r5
+ ldmfd sp!, {r4 - r6, pc}
diff --git a/trunk/arch/arm/kernel/head-nommu.S b/trunk/arch/arm/kernel/head-nommu.S
new file mode 100644
index 000000000000..b093ab8738b5
--- /dev/null
+++ b/trunk/arch/arm/kernel/head-nommu.S
@@ -0,0 +1,83 @@
+/*
+ * linux/arch/arm/kernel/head-nommu.S
+ *
+ * Copyright (C) 1994-2002 Russell King
+ * Copyright (C) 2003-2006 Hyok S. Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common kernel startup code (non-paged MM)
+ * for 32-bit CPUs which has a process ID register(CP15).
+ *
+ */
+#include
+#include
+#include
+
+#include
+#include
+#include
+#include
+#include
+#include
+
+#define PROCINFO_INITFUNC 12
+
+/*
+ * Kernel startup entry point.
+ * ---------------------------
+ *
+ * This is normally called from the decompressor code. The requirements
+ * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
+ * r1 = machine nr.
+ *
+ * See linux/arch/arm/tools/mach-types for the complete list of machine
+ * numbers for r1.
+ *
+ */
+ __INIT
+ .type stext, %function
+ENTRY(stext)
+ msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode
+ @ and irqs disabled
+ mrc p15, 0, r9, c0, c0 @ get processor id
+ bl __lookup_processor_type @ r5=procinfo r9=cpuid
+ movs r10, r5 @ invalid processor (r5=0)?
+ beq __error_p @ yes, error 'p'
+ bl __lookup_machine_type @ r5=machinfo
+ movs r8, r5 @ invalid machine (r5=0)?
+ beq __error_a @ yes, error 'a'
+
+ ldr r13, __switch_data @ address to jump to after
+ @ the initialization is done
+ adr lr, __after_proc_init @ return (PIC) address
+ add pc, r10, #PROCINFO_INITFUNC
+
+/*
+ * Set the Control Register and Read the process ID.
+ */
+ .type __after_proc_init, %function
+__after_proc_init:
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+#ifdef CONFIG_ALIGNMENT_TRAP
+ orr r0, r0, #CR_A
+#else
+ bic r0, r0, #CR_A
+#endif
+#ifdef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CR_C
+#endif
+#ifdef CONFIG_CPU_BPREDICT_DISABLE
+ bic r0, r0, #CR_Z
+#endif
+#ifdef CONFIG_CPU_ICACHE_DISABLE
+ bic r0, r0, #CR_I
+#endif
+ mcr p15, 0, r0, c1, c0, 0 @ write control reg
+
+ mov pc, r13 @ clear the BSS and jump
+ @ to start_kernel
+
+#include "head-common.S"
diff --git a/trunk/arch/arm/kernel/head.S b/trunk/arch/arm/kernel/head.S
index 53b6901f70a6..04b66a9328ef 100644
--- a/trunk/arch/arm/kernel/head.S
+++ b/trunk/arch/arm/kernel/head.S
@@ -102,49 +102,6 @@ ENTRY(stext)
adr lr, __enable_mmu @ return (PIC) address
add pc, r10, #PROCINFO_INITFUNC
- .type __switch_data, %object
-__switch_data:
- .long __mmap_switched
- .long __data_loc @ r4
- .long __data_start @ r5
- .long __bss_start @ r6
- .long _end @ r7
- .long processor_id @ r4
- .long __machine_arch_type @ r5
- .long cr_alignment @ r6
- .long init_thread_union + THREAD_START_SP @ sp
-
-/*
- * The following fragment of code is executed with the MMU on, and uses
- * absolute addresses; this is not position independent.
- *
- * r0 = cp#15 control register
- * r1 = machine ID
- * r9 = processor ID
- */
- .type __mmap_switched, %function
-__mmap_switched:
- adr r3, __switch_data + 4
-
- ldmia r3!, {r4, r5, r6, r7}
- cmp r4, r5 @ Copy data segment if needed
-1: cmpne r5, r6
- ldrne fp, [r4], #4
- strne fp, [r5], #4
- bne 1b
-
- mov fp, #0 @ Clear BSS (and zero fp)
-1: cmp r6, r7
- strcc fp, [r6],#4
- bcc 1b
-
- ldmia r3, {r4, r5, r6, sp}
- str r9, [r4] @ Save processor ID
- str r1, [r5] @ Save machine type
- bic r4, r0, #CR_A @ Clear 'A' bit
- stmia r6, {r0, r4} @ Save control register values
- b start_kernel
-
#if defined(CONFIG_SMP)
.type secondary_startup, #function
ENTRY(secondary_startup)
@@ -367,166 +324,4 @@ __create_page_tables:
mov pc, lr
.ltorg
-
-
-/*
- * Exception handling. Something went wrong and we can't proceed. We
- * ought to tell the user, but since we don't have any guarantee that
- * we're even running on the right architecture, we do virtually nothing.
- *
- * If CONFIG_DEBUG_LL is set we try to print out something about the error
- * and hope for the best (useful if bootloader fails to pass a proper
- * machine ID for example).
- */
-
- .type __error_p, %function
-__error_p:
-#ifdef CONFIG_DEBUG_LL
- adr r0, str_p1
- bl printascii
- b __error
-str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n"
- .align
-#endif
-
- .type __error_a, %function
-__error_a:
-#ifdef CONFIG_DEBUG_LL
- mov r4, r1 @ preserve machine ID
- adr r0, str_a1
- bl printascii
- mov r0, r4
- bl printhex8
- adr r0, str_a2
- bl printascii
- adr r3, 3f
- ldmia r3, {r4, r5, r6} @ get machine desc list
- sub r4, r3, r4 @ get offset between virt&phys
- add r5, r5, r4 @ convert virt addresses to
- add r6, r6, r4 @ physical address space
-1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type
- bl printhex8
- mov r0, #'\t'
- bl printch
- ldr r0, [r5, #MACHINFO_NAME] @ get machine name
- add r0, r0, r4
- bl printascii
- mov r0, #'\n'
- bl printch
- add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
- cmp r5, r6
- blo 1b
- adr r0, str_a3
- bl printascii
- b __error
-str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x"
-str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
-str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n"
- .align
-#endif
-
- .type __error, %function
-__error:
-#ifdef CONFIG_ARCH_RPC
-/*
- * Turn the screen red on a error - RiscPC only.
- */
- mov r0, #0x02000000
- mov r3, #0x11
- orr r3, r3, r3, lsl #8
- orr r3, r3, r3, lsl #16
- str r3, [r0], #4
- str r3, [r0], #4
- str r3, [r0], #4
- str r3, [r0], #4
-#endif
-1: mov r0, r0
- b 1b
-
-
-/*
- * Read processor ID register (CP#15, CR0), and look up in the linker-built
- * supported processor list. Note that we can't use the absolute addresses
- * for the __proc_info lists since we aren't running with the MMU on
- * (and therefore, we are not in the correct address space). We have to
- * calculate the offset.
- *
- * r9 = cpuid
- * Returns:
- * r3, r4, r6 corrupted
- * r5 = proc_info pointer in physical address space
- * r9 = cpuid (preserved)
- */
- .type __lookup_processor_type, %function
-__lookup_processor_type:
- adr r3, 3f
- ldmda r3, {r5 - r7}
- sub r3, r3, r7 @ get offset between virt&phys
- add r5, r5, r3 @ convert virt addresses to
- add r6, r6, r3 @ physical address space
-1: ldmia r5, {r3, r4} @ value, mask
- and r4, r4, r9 @ mask wanted bits
- teq r3, r4
- beq 2f
- add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list)
- cmp r5, r6
- blo 1b
- mov r5, #0 @ unknown processor
-2: mov pc, lr
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_processor_type)
- stmfd sp!, {r4 - r7, r9, lr}
- mov r9, r0
- bl __lookup_processor_type
- mov r0, r5
- ldmfd sp!, {r4 - r7, r9, pc}
-
-/*
- * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
- * more information about the __proc_info and __arch_info structures.
- */
- .long __proc_info_begin
- .long __proc_info_end
-3: .long .
- .long __arch_info_begin
- .long __arch_info_end
-
-/*
- * Lookup machine architecture in the linker-build list of architectures.
- * Note that we can't use the absolute addresses for the __arch_info
- * lists since we aren't running with the MMU on (and therefore, we are
- * not in the correct address space). We have to calculate the offset.
- *
- * r1 = machine architecture number
- * Returns:
- * r3, r4, r6 corrupted
- * r5 = mach_info pointer in physical address space
- */
- .type __lookup_machine_type, %function
-__lookup_machine_type:
- adr r3, 3b
- ldmia r3, {r4, r5, r6}
- sub r3, r3, r4 @ get offset between virt&phys
- add r5, r5, r3 @ convert virt addresses to
- add r6, r6, r3 @ physical address space
-1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type
- teq r3, r1 @ matches loader number?
- beq 2f @ found
- add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
- cmp r5, r6
- blo 1b
- mov r5, #0 @ unknown machine
-2: mov pc, lr
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_machine_type)
- stmfd sp!, {r4 - r6, lr}
- mov r1, r0
- bl __lookup_machine_type
- mov r0, r5
- ldmfd sp!, {r4 - r6, pc}
+#include "head-common.S"
diff --git a/trunk/arch/arm/kernel/process.c b/trunk/arch/arm/kernel/process.c
index 489c069e5c3e..1ff75cee4b0d 100644
--- a/trunk/arch/arm/kernel/process.c
+++ b/trunk/arch/arm/kernel/process.c
@@ -474,4 +474,3 @@ unsigned long get_wchan(struct task_struct *p)
} while (count ++ < 16);
return 0;
}
-EXPORT_SYMBOL(get_wchan);
diff --git a/trunk/arch/arm/kernel/signal.h b/trunk/arch/arm/kernel/signal.h
index 9991049c522d..27beece15502 100644
--- a/trunk/arch/arm/kernel/signal.h
+++ b/trunk/arch/arm/kernel/signal.h
@@ -7,6 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#define KERN_SIGRETURN_CODE 0xffff0500
+#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500)
extern const unsigned long sigreturn_codes[7];
diff --git a/trunk/arch/arm/kernel/traps.c b/trunk/arch/arm/kernel/traps.c
index d566d5f4574d..35230a060108 100644
--- a/trunk/arch/arm/kernel/traps.c
+++ b/trunk/arch/arm/kernel/traps.c
@@ -688,6 +688,7 @@ EXPORT_SYMBOL(abort);
void __init trap_init(void)
{
+ unsigned long vectors = CONFIG_VECTORS_BASE;
extern char __stubs_start[], __stubs_end[];
extern char __vectors_start[], __vectors_end[];
extern char __kuser_helper_start[], __kuser_helper_end[];
@@ -698,9 +699,9 @@ void __init trap_init(void)
* into the vector page, mapped at 0xffff0000, and ensure these
* are visible to the instruction stream.
*/
- memcpy((void *)0xffff0000, __vectors_start, __vectors_end - __vectors_start);
- memcpy((void *)0xffff0200, __stubs_start, __stubs_end - __stubs_start);
- memcpy((void *)0xffff1000 - kuser_sz, __kuser_helper_start, kuser_sz);
+ memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
+ memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start);
+ memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
/*
* Copy signal return handlers into the vector page, and
@@ -709,6 +710,6 @@ void __init trap_init(void)
memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
sizeof(sigreturn_codes));
- flush_icache_range(0xffff0000, 0xffff0000 + PAGE_SIZE);
+ flush_icache_range(vectors, vectors + PAGE_SIZE);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
}
diff --git a/trunk/arch/arm/mach-pxa/corgi.c b/trunk/arch/arm/mach-pxa/corgi.c
index 68923b1d2b62..d6d726036361 100644
--- a/trunk/arch/arm/mach-pxa/corgi.c
+++ b/trunk/arch/arm/mach-pxa/corgi.c
@@ -141,6 +141,8 @@ struct corgissp_machinfo corgi_ssp_machinfo = {
*/
static struct corgibl_machinfo corgi_bl_machinfo = {
.max_intensity = 0x2f,
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
.set_bl_intensity = corgi_bl_set_intensity,
};
@@ -163,6 +165,14 @@ static struct platform_device corgikbd_device = {
};
+/*
+ * Corgi LEDs
+ */
+static struct platform_device corgiled_device = {
+ .name = "corgi-led",
+ .id = -1,
+};
+
/*
* Corgi Touch Screen Device
*/
@@ -297,6 +307,7 @@ static struct platform_device *devices[] __initdata = {
&corgikbd_device,
&corgibl_device,
&corgits_device,
+ &corgiled_device,
};
static void __init corgi_init(void)
diff --git a/trunk/arch/arm/mach-pxa/spitz.c b/trunk/arch/arm/mach-pxa/spitz.c
index 0dbb079ecd25..19b372df544a 100644
--- a/trunk/arch/arm/mach-pxa/spitz.c
+++ b/trunk/arch/arm/mach-pxa/spitz.c
@@ -220,6 +220,8 @@ struct corgissp_machinfo spitz_ssp_machinfo = {
* Spitz Backlight Device
*/
static struct corgibl_machinfo spitz_bl_machinfo = {
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
.max_intensity = 0x2f,
};
@@ -241,6 +243,14 @@ static struct platform_device spitzkbd_device = {
};
+/*
+ * Spitz LEDs
+ */
+static struct platform_device spitzled_device = {
+ .name = "spitz-led",
+ .id = -1,
+};
+
/*
* Spitz Touch Screen Device
*/
@@ -418,6 +428,7 @@ static struct platform_device *devices[] __initdata = {
&spitzkbd_device,
&spitzts_device,
&spitzbl_device,
+ &spitzled_device,
};
static void __init common_init(void)
diff --git a/trunk/arch/arm/mach-pxa/tosa.c b/trunk/arch/arm/mach-pxa/tosa.c
index 66ec71756d0f..76c0e7f0a219 100644
--- a/trunk/arch/arm/mach-pxa/tosa.c
+++ b/trunk/arch/arm/mach-pxa/tosa.c
@@ -251,10 +251,19 @@ static struct platform_device tosakbd_device = {
.id = -1,
};
+/*
+ * Tosa LEDs
+ */
+static struct platform_device tosaled_device = {
+ .name = "tosa-led",
+ .id = -1,
+};
+
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
&tosakbd_device,
+ &tosaled_device,
};
static void __init tosa_init(void)
diff --git a/trunk/arch/arm/mm/proc-xsc3.S b/trunk/arch/arm/mm/proc-xsc3.S
index f90513e9af0c..b9dfce57c272 100644
--- a/trunk/arch/arm/mm/proc-xsc3.S
+++ b/trunk/arch/arm/mm/proc-xsc3.S
@@ -30,6 +30,7 @@
#include
#include
#include
+#include
#include
#include
#include "proc-macros.S"
diff --git a/trunk/arch/arm26/kernel/armksyms.c b/trunk/arch/arm26/kernel/armksyms.c
index 811a6376c624..a6a1b3373444 100644
--- a/trunk/arch/arm26/kernel/armksyms.c
+++ b/trunk/arch/arm26/kernel/armksyms.c
@@ -212,8 +212,6 @@ EXPORT_SYMBOL(sys_open);
EXPORT_SYMBOL(sys_exit);
EXPORT_SYMBOL(sys_wait4);
-EXPORT_SYMBOL(get_wchan);
-
#ifdef CONFIG_PREEMPT
EXPORT_SYMBOL(kernel_flag);
#endif
diff --git a/trunk/arch/frv/kernel/frv_ksyms.c b/trunk/arch/frv/kernel/frv_ksyms.c
index aa6b7d0a2109..07c8ffa0dd39 100644
--- a/trunk/arch/frv/kernel/frv_ksyms.c
+++ b/trunk/arch/frv/kernel/frv_ksyms.c
@@ -79,8 +79,6 @@ EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(__outsl_ns);
EXPORT_SYMBOL(__insl_ns);
-EXPORT_SYMBOL(get_wchan);
-
#ifdef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
EXPORT_SYMBOL(atomic_test_and_ANDNOT_mask);
EXPORT_SYMBOL(atomic_test_and_OR_mask);
diff --git a/trunk/arch/h8300/kernel/h8300_ksyms.c b/trunk/arch/h8300/kernel/h8300_ksyms.c
index 69d6ad32d56c..b6cd78c972bb 100644
--- a/trunk/arch/h8300/kernel/h8300_ksyms.c
+++ b/trunk/arch/h8300/kernel/h8300_ksyms.c
@@ -55,8 +55,6 @@ EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(memscan);
EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(get_wchan);
-
/*
* libgcc functions - functions that are used internally by the
* compiler... (prototypes are not correct though, but that
diff --git a/trunk/arch/i386/kernel/apic.c b/trunk/arch/i386/kernel/apic.c
index eb5279d23b7f..6273bf74c203 100644
--- a/trunk/arch/i386/kernel/apic.c
+++ b/trunk/arch/i386/kernel/apic.c
@@ -415,6 +415,7 @@ void __init init_bsp_APIC(void)
void __devinit setup_local_APIC(void)
{
unsigned long oldvalue, value, ver, maxlvt;
+ int i, j;
/* Pound the ESR really hard over the head with a big hammer - mbligh */
if (esr_disable) {
@@ -451,6 +452,25 @@ void __devinit setup_local_APIC(void)
value &= ~APIC_TPRI_MASK;
apic_write_around(APIC_TASKPRI, value);
+ /*
+ * After a crash, we no longer service the interrupts and a pending
+ * interrupt from previous kernel might still have ISR bit set.
+ *
+ * Most probably by now CPU has serviced that pending interrupt and
+ * it might not have done the ack_APIC_irq() because it thought,
+ * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
+ * does not clear the ISR bit and cpu thinks it has already serivced
+ * the interrupt. Hence a vector might get locked. It was noticed
+ * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
+ */
+ for (i = APIC_ISR_NR - 1; i >= 0; i--) {
+ value = apic_read(APIC_ISR + i*0x10);
+ for (j = 31; j >= 0; j--) {
+ if (value & (1<
*
- * 00/04/19 D. Mosberger Rewritten to mirror more closely the x86 I/O APIC code.
- * In particular, we now have separate handlers for edge
- * and level triggered interrupts.
- * 00/10/27 Asit Mallick, Goutham Rao IRQ vector allocation
- * PCI to vector mapping, shared PCI interrupts.
- * 00/10/27 D. Mosberger Document things a bit more to make them more understandable.
- * Clean up much of the old IOSAPIC cruft.
- * 01/07/27 J.I. Lee PCI irq routing, Platform/Legacy interrupts and fixes for
- * ACPI S5(SoftOff) support.
+ * 00/04/19 D. Mosberger Rewritten to mirror more closely the x86 I/O
+ * APIC code. In particular, we now have separate
+ * handlers for edge and level triggered
+ * interrupts.
+ * 00/10/27 Asit Mallick, Goutham Rao IRQ vector
+ * allocation PCI to vector mapping, shared PCI
+ * interrupts.
+ * 00/10/27 D. Mosberger Document things a bit more to make them more
+ * understandable. Clean up much of the old
+ * IOSAPIC cruft.
+ * 01/07/27 J.I. Lee PCI irq routing, Platform/Legacy interrupts
+ * and fixes for ACPI S5(SoftOff) support.
* 02/01/23 J.I. Lee iosapic pgm fixes for PCI irq routing from _PRT
- * 02/01/07 E. Focht Redirectable interrupt vectors in
- * iosapic_set_affinity(), initializations for
- * /proc/irq/#/smp_affinity
+ * 02/01/07 E. Focht Redirectable interrupt
+ * vectors in iosapic_set_affinity(),
+ * initializations for /proc/irq/#/smp_affinity
* 02/04/02 P. Diefenbaugh Cleaned up ACPI PCI IRQ routing.
* 02/04/18 J.I. Lee bug fix in iosapic_init_pci_irq
- * 02/04/30 J.I. Lee bug fix in find_iosapic to fix ACPI PCI IRQ to IOSAPIC mapping
- * error
+ * 02/04/30 J.I. Lee bug fix in find_iosapic to fix ACPI PCI IRQ to
+ * IOSAPIC mapping error
* 02/07/29 T. Kochi Allocate interrupt vectors dynamically
- * 02/08/04 T. Kochi Cleaned up terminology (irq, global system interrupt, vector, etc.)
- * 02/09/20 D. Mosberger Simplified by taking advantage of ACPI's pci_irq code.
+ * 02/08/04 T. Kochi Cleaned up terminology (irq, global system
+ * interrupt, vector, etc.)
+ * 02/09/20 D. Mosberger Simplified by taking advantage of ACPI's
+ * pci_irq code.
* 03/02/19 B. Helgaas Make pcat_compat system-wide, not per-IOSAPIC.
- * Remove iosapic_address & gsi_base from external interfaces.
- * Rationalize __init/__devinit attributes.
+ * Remove iosapic_address & gsi_base from
+ * external interfaces. Rationalize
+ * __init/__devinit attributes.
* 04/12/04 Ashok Raj Intel Corporation 2004
- * Updated to work with irq migration necessary for CPU Hotplug
+ * Updated to work with irq migration necessary
+ * for CPU Hotplug
*/
/*
- * Here is what the interrupt logic between a PCI device and the kernel looks like:
+ * Here is what the interrupt logic between a PCI device and the kernel looks
+ * like:
*
- * (1) A PCI device raises one of the four interrupt pins (INTA, INTB, INTC, INTD). The
- * device is uniquely identified by its bus--, and slot-number (the function
- * number does not matter here because all functions share the same interrupt
- * lines).
+ * (1) A PCI device raises one of the four interrupt pins (INTA, INTB, INTC,
+ * INTD). The device is uniquely identified by its bus-, and slot-number
+ * (the function number does not matter here because all functions share
+ * the same interrupt lines).
*
- * (2) The motherboard routes the interrupt line to a pin on a IOSAPIC controller.
- * Multiple interrupt lines may have to share the same IOSAPIC pin (if they're level
- * triggered and use the same polarity). Each interrupt line has a unique Global
- * System Interrupt (GSI) number which can be calculated as the sum of the controller's
- * base GSI number and the IOSAPIC pin number to which the line connects.
+ * (2) The motherboard routes the interrupt line to a pin on a IOSAPIC
+ * controller. Multiple interrupt lines may have to share the same
+ * IOSAPIC pin (if they're level triggered and use the same polarity).
+ * Each interrupt line has a unique Global System Interrupt (GSI) number
+ * which can be calculated as the sum of the controller's base GSI number
+ * and the IOSAPIC pin number to which the line connects.
*
- * (3) The IOSAPIC uses an internal routing table entries (RTEs) to map the IOSAPIC pin
- * into the IA-64 interrupt vector. This interrupt vector is then sent to the CPU.
+ * (3) The IOSAPIC uses an internal routing table entries (RTEs) to map the
+ * IOSAPIC pin into the IA-64 interrupt vector. This interrupt vector is then
+ * sent to the CPU.
*
- * (4) The kernel recognizes an interrupt as an IRQ. The IRQ interface is used as
- * architecture-independent interrupt handling mechanism in Linux. As an
- * IRQ is a number, we have to have IA-64 interrupt vector number <-> IRQ number
- * mapping. On smaller systems, we use one-to-one mapping between IA-64 vector and
- * IRQ. A platform can implement platform_irq_to_vector(irq) and
+ * (4) The kernel recognizes an interrupt as an IRQ. The IRQ interface is
+ * used as architecture-independent interrupt handling mechanism in Linux.
+ * As an IRQ is a number, we have to have
+ * IA-64 interrupt vector number <-> IRQ number mapping. On smaller
+ * systems, we use one-to-one mapping between IA-64 vector and IRQ. A
+ * platform can implement platform_irq_to_vector(irq) and
* platform_local_vector_to_irq(vector) APIs to differentiate the mapping.
* Please see also include/asm-ia64/hw_irq.h for those APIs.
*
@@ -64,9 +75,9 @@
*
* PCI pin -> global system interrupt (GSI) -> IA-64 vector <-> IRQ
*
- * Note: The term "IRQ" is loosely used everywhere in Linux kernel to describe interrupts.
- * Now we use "IRQ" only for Linux IRQ's. ISA IRQ (isa_irq) is the only exception in this
- * source code.
+ * Note: The term "IRQ" is loosely used everywhere in Linux kernel to
+ * describeinterrupts. Now we use "IRQ" only for Linux IRQ's. ISA IRQ
+ * (isa_irq) is the only exception in this source code.
*/
#include
@@ -90,7 +101,6 @@
#include
#include
-
#undef DEBUG_INTERRUPT_ROUTING
#ifdef DEBUG_INTERRUPT_ROUTING
@@ -99,36 +109,46 @@
#define DBG(fmt...)
#endif
-#define NR_PREALLOCATE_RTE_ENTRIES (PAGE_SIZE / sizeof(struct iosapic_rte_info))
+#define NR_PREALLOCATE_RTE_ENTRIES \
+ (PAGE_SIZE / sizeof(struct iosapic_rte_info))
#define RTE_PREALLOCATED (1)
static DEFINE_SPINLOCK(iosapic_lock);
-/* These tables map IA-64 vectors to the IOSAPIC pin that generates this vector. */
+/*
+ * These tables map IA-64 vectors to the IOSAPIC pin that generates this
+ * vector.
+ */
struct iosapic_rte_info {
- struct list_head rte_list; /* node in list of RTEs sharing the same vector */
+ struct list_head rte_list; /* node in list of RTEs sharing the
+ * same vector */
char __iomem *addr; /* base address of IOSAPIC */
- unsigned int gsi_base; /* first GSI assigned to this IOSAPIC */
+ unsigned int gsi_base; /* first GSI assigned to this
+ * IOSAPIC */
char rte_index; /* IOSAPIC RTE index */
int refcnt; /* reference counter */
unsigned int flags; /* flags */
} ____cacheline_aligned;
static struct iosapic_intr_info {
- struct list_head rtes; /* RTEs using this vector (empty => not an IOSAPIC interrupt) */
+ struct list_head rtes; /* RTEs using this vector (empty =>
+ * not an IOSAPIC interrupt) */
int count; /* # of RTEs that shares this vector */
- u32 low32; /* current value of low word of Redirection table entry */
+ u32 low32; /* current value of low word of
+ * Redirection table entry */
unsigned int dest; /* destination CPU physical ID */
unsigned char dmode : 3; /* delivery mode (see iosapic.h) */
- unsigned char polarity: 1; /* interrupt polarity (see iosapic.h) */
+ unsigned char polarity: 1; /* interrupt polarity
+ * (see iosapic.h) */
unsigned char trigger : 1; /* trigger mode (see iosapic.h) */
} iosapic_intr_info[IA64_NUM_VECTORS];
static struct iosapic {
char __iomem *addr; /* base address of IOSAPIC */
- unsigned int gsi_base; /* first GSI assigned to this IOSAPIC */
- unsigned short num_rte; /* number of RTE in this IOSAPIC */
+ unsigned int gsi_base; /* first GSI assigned to this
+ * IOSAPIC */
+ unsigned short num_rte; /* # of RTEs on this IOSAPIC */
int rtes_inuse; /* # of RTEs in use on this IOSAPIC */
#ifdef CONFIG_NUMA
unsigned short node; /* numa node association via pxm */
@@ -149,7 +169,8 @@ find_iosapic (unsigned int gsi)
int i;
for (i = 0; i < NR_IOSAPICS; i++) {
- if ((unsigned) (gsi - iosapic_lists[i].gsi_base) < iosapic_lists[i].num_rte)
+ if ((unsigned) (gsi - iosapic_lists[i].gsi_base) <
+ iosapic_lists[i].num_rte)
return i;
}
@@ -162,7 +183,8 @@ _gsi_to_vector (unsigned int gsi)
struct iosapic_intr_info *info;
struct iosapic_rte_info *rte;
- for (info = iosapic_intr_info; info < iosapic_intr_info + IA64_NUM_VECTORS; ++info)
+ for (info = iosapic_intr_info; info <
+ iosapic_intr_info + IA64_NUM_VECTORS; ++info)
list_for_each_entry(rte, &info->rtes, rte_list)
if (rte->gsi_base + rte->rte_index == gsi)
return info - iosapic_intr_info;
@@ -185,8 +207,8 @@ gsi_to_irq (unsigned int gsi)
unsigned long flags;
int irq;
/*
- * XXX fix me: this assumes an identity mapping vetween IA-64 vector and Linux irq
- * numbers...
+ * XXX fix me: this assumes an identity mapping between IA-64 vector
+ * and Linux irq numbers...
*/
spin_lock_irqsave(&iosapic_lock, flags);
{
@@ -197,7 +219,8 @@ gsi_to_irq (unsigned int gsi)
return irq;
}
-static struct iosapic_rte_info *gsi_vector_to_rte(unsigned int gsi, unsigned int vec)
+static struct iosapic_rte_info *gsi_vector_to_rte(unsigned int gsi,
+ unsigned int vec)
{
struct iosapic_rte_info *rte;
@@ -237,7 +260,9 @@ set_rte (unsigned int gsi, unsigned int vector, unsigned int dest, int mask)
for (irq = 0; irq < NR_IRQS; ++irq)
if (irq_to_vector(irq) == vector) {
- set_irq_affinity_info(irq, (int)(dest & 0xffff), redir);
+ set_irq_affinity_info(irq,
+ (int)(dest & 0xffff),
+ redir);
break;
}
}
@@ -259,7 +284,7 @@ set_rte (unsigned int gsi, unsigned int vector, unsigned int dest, int mask)
}
static void
-nop (unsigned int vector)
+nop (unsigned int irq)
{
/* do nothing... */
}
@@ -281,7 +306,8 @@ mask_irq (unsigned int irq)
{
/* set only the mask bit */
low32 = iosapic_intr_info[vec].low32 |= IOSAPIC_MASK;
- list_for_each_entry(rte, &iosapic_intr_info[vec].rtes, rte_list) {
+ list_for_each_entry(rte, &iosapic_intr_info[vec].rtes,
+ rte_list) {
addr = rte->addr;
rte_index = rte->rte_index;
iosapic_write(addr, IOSAPIC_RTE_LOW(rte_index), low32);
@@ -306,7 +332,8 @@ unmask_irq (unsigned int irq)
spin_lock_irqsave(&iosapic_lock, flags);
{
low32 = iosapic_intr_info[vec].low32 &= ~IOSAPIC_MASK;
- list_for_each_entry(rte, &iosapic_intr_info[vec].rtes, rte_list) {
+ list_for_each_entry(rte, &iosapic_intr_info[vec].rtes,
+ rte_list) {
addr = rte->addr;
rte_index = rte->rte_index;
iosapic_write(addr, IOSAPIC_RTE_LOW(rte_index), low32);
@@ -346,21 +373,25 @@ iosapic_set_affinity (unsigned int irq, cpumask_t mask)
spin_lock_irqsave(&iosapic_lock, flags);
{
- low32 = iosapic_intr_info[vec].low32 & ~(7 << IOSAPIC_DELIVERY_SHIFT);
+ low32 = iosapic_intr_info[vec].low32 &
+ ~(7 << IOSAPIC_DELIVERY_SHIFT);
if (redir)
/* change delivery mode to lowest priority */
- low32 |= (IOSAPIC_LOWEST_PRIORITY << IOSAPIC_DELIVERY_SHIFT);
+ low32 |= (IOSAPIC_LOWEST_PRIORITY <<
+ IOSAPIC_DELIVERY_SHIFT);
else
/* change delivery mode to fixed */
low32 |= (IOSAPIC_FIXED << IOSAPIC_DELIVERY_SHIFT);
iosapic_intr_info[vec].low32 = low32;
iosapic_intr_info[vec].dest = dest;
- list_for_each_entry(rte, &iosapic_intr_info[vec].rtes, rte_list) {
+ list_for_each_entry(rte, &iosapic_intr_info[vec].rtes,
+ rte_list) {
addr = rte->addr;
rte_index = rte->rte_index;
- iosapic_write(addr, IOSAPIC_RTE_HIGH(rte_index), high32);
+ iosapic_write(addr, IOSAPIC_RTE_HIGH(rte_index),
+ high32);
iosapic_write(addr, IOSAPIC_RTE_LOW(rte_index), low32);
}
}
@@ -433,7 +464,8 @@ iosapic_ack_edge_irq (unsigned int irq)
* interrupt for real. This prevents IRQ storms from unhandled
* devices.
*/
- if ((idesc->status & (IRQ_PENDING|IRQ_DISABLED)) == (IRQ_PENDING|IRQ_DISABLED))
+ if ((idesc->status & (IRQ_PENDING|IRQ_DISABLED)) ==
+ (IRQ_PENDING|IRQ_DISABLED))
mask_irq(irq);
}
@@ -467,7 +499,8 @@ iosapic_version (char __iomem *addr)
return iosapic_read(addr, IOSAPIC_VERSION);
}
-static int iosapic_find_sharable_vector (unsigned long trigger, unsigned long pol)
+static int iosapic_find_sharable_vector (unsigned long trigger,
+ unsigned long pol)
{
int i, vector = -1, min_count = -1;
struct iosapic_intr_info *info;
@@ -482,7 +515,8 @@ static int iosapic_find_sharable_vector (unsigned long trigger, unsigned long po
for (i = IA64_FIRST_DEVICE_VECTOR; i <= IA64_LAST_DEVICE_VECTOR; i++) {
info = &iosapic_intr_info[i];
if (info->trigger == trigger && info->polarity == pol &&
- (info->dmode == IOSAPIC_FIXED || info->dmode == IOSAPIC_LOWEST_PRIORITY)) {
+ (info->dmode == IOSAPIC_FIXED || info->dmode ==
+ IOSAPIC_LOWEST_PRIORITY)) {
if (min_count == -1 || info->count < min_count) {
vector = i;
min_count = info->count;
@@ -506,12 +540,15 @@ iosapic_reassign_vector (int vector)
new_vector = assign_irq_vector(AUTO_ASSIGN);
if (new_vector < 0)
panic("%s: out of interrupt vectors!\n", __FUNCTION__);
- printk(KERN_INFO "Reassigning vector %d to %d\n", vector, new_vector);
+ printk(KERN_INFO "Reassigning vector %d to %d\n",
+ vector, new_vector);
memcpy(&iosapic_intr_info[new_vector], &iosapic_intr_info[vector],
sizeof(struct iosapic_intr_info));
INIT_LIST_HEAD(&iosapic_intr_info[new_vector].rtes);
- list_move(iosapic_intr_info[vector].rtes.next, &iosapic_intr_info[new_vector].rtes);
- memset(&iosapic_intr_info[vector], 0, sizeof(struct iosapic_intr_info));
+ list_move(iosapic_intr_info[vector].rtes.next,
+ &iosapic_intr_info[new_vector].rtes);
+ memset(&iosapic_intr_info[vector], 0,
+ sizeof(struct iosapic_intr_info));
iosapic_intr_info[vector].low32 = IOSAPIC_MASK;
INIT_LIST_HEAD(&iosapic_intr_info[vector].rtes);
}
@@ -524,7 +561,8 @@ static struct iosapic_rte_info *iosapic_alloc_rte (void)
int preallocated = 0;
if (!iosapic_kmalloc_ok && list_empty(&free_rte_list)) {
- rte = alloc_bootmem(sizeof(struct iosapic_rte_info) * NR_PREALLOCATE_RTE_ENTRIES);
+ rte = alloc_bootmem(sizeof(struct iosapic_rte_info) *
+ NR_PREALLOCATE_RTE_ENTRIES);
if (!rte)
return NULL;
for (i = 0; i < NR_PREALLOCATE_RTE_ENTRIES; i++, rte++)
@@ -532,7 +570,8 @@ static struct iosapic_rte_info *iosapic_alloc_rte (void)
}
if (!list_empty(&free_rte_list)) {
- rte = list_entry(free_rte_list.next, struct iosapic_rte_info, rte_list);
+ rte = list_entry(free_rte_list.next, struct iosapic_rte_info,
+ rte_list);
list_del(&rte->rte_list);
preallocated++;
} else {
@@ -575,7 +614,8 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery,
index = find_iosapic(gsi);
if (index < 0) {
- printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n", __FUNCTION__, gsi);
+ printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n",
+ __FUNCTION__, gsi);
return -ENODEV;
}
@@ -586,7 +626,8 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery,
if (!rte) {
rte = iosapic_alloc_rte();
if (!rte) {
- printk(KERN_WARNING "%s: cannot allocate memory\n", __FUNCTION__);
+ printk(KERN_WARNING "%s: cannot allocate memory\n",
+ __FUNCTION__);
return -ENOMEM;
}
@@ -602,7 +643,9 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery,
else if (vector_is_shared(vector)) {
struct iosapic_intr_info *info = &iosapic_intr_info[vector];
if (info->trigger != trigger || info->polarity != polarity) {
- printk (KERN_WARNING "%s: cannot override the interrupt\n", __FUNCTION__);
+ printk (KERN_WARNING
+ "%s: cannot override the interrupt\n",
+ __FUNCTION__);
return -EINVAL;
}
}
@@ -619,8 +662,10 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery,
idesc = irq_descp(vector);
if (idesc->handler != irq_type) {
if (idesc->handler != &no_irq_type)
- printk(KERN_WARNING "%s: changing vector %d from %s to %s\n",
- __FUNCTION__, vector, idesc->handler->typename, irq_type->typename);
+ printk(KERN_WARNING
+ "%s: changing vector %d from %s to %s\n",
+ __FUNCTION__, vector,
+ idesc->handler->typename, irq_type->typename);
idesc->handler = irq_type;
}
return 0;
@@ -681,7 +726,7 @@ get_target_cpu (unsigned int gsi, int vector)
if (!num_cpus)
goto skip_numa_setup;
- /* Use vector assigment to distribute across cpus in node */
+ /* Use vector assignment to distribute across cpus in node */
cpu_index = vector % num_cpus;
for (numa_cpu = first_cpu(cpu_mask) ; i < cpu_index ; i++)
@@ -703,7 +748,7 @@ get_target_cpu (unsigned int gsi, int vector)
} while (!cpu_online(cpu));
return cpu_physical_id(cpu);
-#else
+#else /* CONFIG_SMP */
return cpu_physical_id(smp_processor_id());
#endif
}
@@ -755,7 +800,8 @@ iosapic_register_intr (unsigned int gsi,
if (list_empty(&iosapic_intr_info[vector].rtes))
free_irq_vector(vector);
spin_unlock(&iosapic_lock);
- spin_unlock_irqrestore(&irq_descp(vector)->lock, flags);
+ spin_unlock_irqrestore(&irq_descp(vector)->lock,
+ flags);
goto again;
}
@@ -764,7 +810,8 @@ iosapic_register_intr (unsigned int gsi,
polarity, trigger);
if (err < 0) {
spin_unlock(&iosapic_lock);
- spin_unlock_irqrestore(&irq_descp(vector)->lock, flags);
+ spin_unlock_irqrestore(&irq_descp(vector)->lock,
+ flags);
return err;
}
@@ -806,7 +853,8 @@ iosapic_unregister_intr (unsigned int gsi)
*/
irq = gsi_to_irq(gsi);
if (irq < 0) {
- printk(KERN_ERR "iosapic_unregister_intr(%u) unbalanced\n", gsi);
+ printk(KERN_ERR "iosapic_unregister_intr(%u) unbalanced\n",
+ gsi);
WARN_ON(1);
return;
}
@@ -817,7 +865,9 @@ iosapic_unregister_intr (unsigned int gsi)
spin_lock(&iosapic_lock);
{
if ((rte = gsi_vector_to_rte(gsi, vector)) == NULL) {
- printk(KERN_ERR "iosapic_unregister_intr(%u) unbalanced\n", gsi);
+ printk(KERN_ERR
+ "iosapic_unregister_intr(%u) unbalanced\n",
+ gsi);
WARN_ON(1);
goto out;
}
@@ -827,7 +877,8 @@ iosapic_unregister_intr (unsigned int gsi)
/* Mask the interrupt */
low32 = iosapic_intr_info[vector].low32 | IOSAPIC_MASK;
- iosapic_write(rte->addr, IOSAPIC_RTE_LOW(rte->rte_index), low32);
+ iosapic_write(rte->addr, IOSAPIC_RTE_LOW(rte->rte_index),
+ low32);
/* Remove the rte entry from the list */
list_del(&rte->rte_list);
@@ -840,7 +891,9 @@ iosapic_unregister_intr (unsigned int gsi)
trigger = iosapic_intr_info[vector].trigger;
polarity = iosapic_intr_info[vector].polarity;
dest = iosapic_intr_info[vector].dest;
- printk(KERN_INFO "GSI %u (%s, %s) -> CPU %d (0x%04x) vector %d unregistered\n",
+ printk(KERN_INFO
+ "GSI %u (%s, %s) -> CPU %d (0x%04x)"
+ " vector %d unregistered\n",
gsi, (trigger == IOSAPIC_EDGE ? "edge" : "level"),
(polarity == IOSAPIC_POL_HIGH ? "high" : "low"),
cpu_logical_id(dest), dest, vector);
@@ -853,12 +906,15 @@ iosapic_unregister_intr (unsigned int gsi)
idesc->handler = &no_irq_type;
/* Clear the interrupt information */
- memset(&iosapic_intr_info[vector], 0, sizeof(struct iosapic_intr_info));
+ memset(&iosapic_intr_info[vector], 0,
+ sizeof(struct iosapic_intr_info));
iosapic_intr_info[vector].low32 |= IOSAPIC_MASK;
INIT_LIST_HEAD(&iosapic_intr_info[vector].rtes);
if (idesc->action) {
- printk(KERN_ERR "interrupt handlers still exist on IRQ %u\n", irq);
+ printk(KERN_ERR
+ "interrupt handlers still exist on"
+ "IRQ %u\n", irq);
WARN_ON(1);
}
@@ -873,7 +929,6 @@ iosapic_unregister_intr (unsigned int gsi)
/*
* ACPI calls this when it finds an entry for a platform interrupt.
- * Note that the irq_base and IOSAPIC address must be set in iosapic_init().
*/
int __init
iosapic_register_platform_intr (u32 int_type, unsigned int gsi,
@@ -907,13 +962,16 @@ iosapic_register_platform_intr (u32 int_type, unsigned int gsi,
mask = 1;
break;
default:
- printk(KERN_ERR "iosapic_register_platform_irq(): invalid int type 0x%x\n", int_type);
+ printk(KERN_ERR "%s: invalid int type 0x%x\n", __FUNCTION__,
+ int_type);
return -1;
}
register_intr(gsi, vector, delivery, polarity, trigger);
- printk(KERN_INFO "PLATFORM int %s (0x%x): GSI %u (%s, %s) -> CPU %d (0x%04x) vector %d\n",
+ printk(KERN_INFO
+ "PLATFORM int %s (0x%x): GSI %u (%s, %s) -> CPU %d (0x%04x)"
+ " vector %d\n",
int_type < ARRAY_SIZE(name) ? name[int_type] : "unknown",
int_type, gsi, (trigger == IOSAPIC_EDGE ? "edge" : "level"),
(polarity == IOSAPIC_POL_HIGH ? "high" : "low"),
@@ -923,10 +981,8 @@ iosapic_register_platform_intr (u32 int_type, unsigned int gsi,
return vector;
}
-
/*
* ACPI calls this when it finds an entry for a legacy ISA IRQ override.
- * Note that the gsi_base and IOSAPIC address must be set in iosapic_init().
*/
void __init
iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
@@ -955,16 +1011,19 @@ iosapic_system_init (int system_pcat_compat)
for (vector = 0; vector < IA64_NUM_VECTORS; ++vector) {
iosapic_intr_info[vector].low32 = IOSAPIC_MASK;
- INIT_LIST_HEAD(&iosapic_intr_info[vector].rtes); /* mark as unused */
+ /* mark as unused */
+ INIT_LIST_HEAD(&iosapic_intr_info[vector].rtes);
}
pcat_compat = system_pcat_compat;
if (pcat_compat) {
/*
- * Disable the compatibility mode interrupts (8259 style), needs IN/OUT support
- * enabled.
+ * Disable the compatibility mode interrupts (8259 style),
+ * needs IN/OUT support enabled.
*/
- printk(KERN_INFO "%s: Disabling PC-AT compatible 8259 interrupts\n", __FUNCTION__);
+ printk(KERN_INFO
+ "%s: Disabling PC-AT compatible 8259 interrupts\n",
+ __FUNCTION__);
outb(0xff, 0xA1);
outb(0xff, 0x21);
}
@@ -1004,10 +1063,7 @@ iosapic_check_gsi_range (unsigned int gsi_base, unsigned int ver)
base = iosapic_lists[index].gsi_base;
end = base + iosapic_lists[index].num_rte - 1;
- if (gsi_base < base && gsi_end < base)
- continue;/* OK */
-
- if (gsi_base > end && gsi_end > end)
+ if (gsi_end < base || end < gsi_base)
continue; /* OK */
return -EBUSY;
@@ -1053,12 +1109,14 @@ iosapic_init (unsigned long phys_addr, unsigned int gsi_base)
if ((gsi_base == 0) && pcat_compat) {
/*
- * Map the legacy ISA devices into the IOSAPIC data. Some of these may
- * get reprogrammed later on with data from the ACPI Interrupt Source
- * Override table.
+ * Map the legacy ISA devices into the IOSAPIC data. Some of
+ * these may get reprogrammed later on with data from the ACPI
+ * Interrupt Source Override table.
*/
for (isa_irq = 0; isa_irq < 16; ++isa_irq)
- iosapic_override_isa_irq(isa_irq, isa_irq, IOSAPIC_POL_HIGH, IOSAPIC_EDGE);
+ iosapic_override_isa_irq(isa_irq, isa_irq,
+ IOSAPIC_POL_HIGH,
+ IOSAPIC_EDGE);
}
return 0;
}
@@ -1081,7 +1139,8 @@ iosapic_remove (unsigned int gsi_base)
if (iosapic_lists[index].rtes_inuse) {
err = -EBUSY;
- printk(KERN_WARNING "%s: IOSAPIC for GSI base %u is busy\n",
+ printk(KERN_WARNING
+ "%s: IOSAPIC for GSI base %u is busy\n",
__FUNCTION__, gsi_base);
goto out;
}
diff --git a/trunk/arch/ia64/kernel/palinfo.c b/trunk/arch/ia64/kernel/palinfo.c
index 89faa603c6be..6386f63c413e 100644
--- a/trunk/arch/ia64/kernel/palinfo.c
+++ b/trunk/arch/ia64/kernel/palinfo.c
@@ -240,7 +240,7 @@ cache_info(char *page)
}
p += sprintf(p,
"%s Cache level %lu:\n"
- "\tSize : %lu bytes\n"
+ "\tSize : %u bytes\n"
"\tAttributes : ",
cache_types[j+cci.pcci_unified], i+1,
cci.pcci_cache_size);
@@ -648,9 +648,9 @@ frequency_info(char *page)
if (ia64_pal_freq_ratios(&proc, &bus, &itc) != 0) return 0;
p += sprintf(p,
- "Processor/Clock ratio : %ld/%ld\n"
- "Bus/Clock ratio : %ld/%ld\n"
- "ITC/Clock ratio : %ld/%ld\n",
+ "Processor/Clock ratio : %d/%d\n"
+ "Bus/Clock ratio : %d/%d\n"
+ "ITC/Clock ratio : %d/%d\n",
proc.num, proc.den, bus.num, bus.den, itc.num, itc.den);
return p - page;
diff --git a/trunk/arch/ia64/kernel/time.c b/trunk/arch/ia64/kernel/time.c
index ac167436e936..49958904045b 100644
--- a/trunk/arch/ia64/kernel/time.c
+++ b/trunk/arch/ia64/kernel/time.c
@@ -188,7 +188,7 @@ ia64_init_itm (void)
itc_freq = (platform_base_freq*itc_ratio.num)/itc_ratio.den;
local_cpu_data->itm_delta = (itc_freq + HZ/2) / HZ;
- printk(KERN_DEBUG "CPU %d: base freq=%lu.%03luMHz, ITC ratio=%lu/%lu, "
+ printk(KERN_DEBUG "CPU %d: base freq=%lu.%03luMHz, ITC ratio=%u/%u, "
"ITC freq=%lu.%03luMHz", smp_processor_id(),
platform_base_freq / 1000000, (platform_base_freq / 1000) % 1000,
itc_ratio.num, itc_ratio.den, itc_freq / 1000000, (itc_freq / 1000) % 1000);
diff --git a/trunk/arch/ia64/kernel/topology.c b/trunk/arch/ia64/kernel/topology.c
index 3b6fd798c4d6..b47476d655f1 100644
--- a/trunk/arch/ia64/kernel/topology.c
+++ b/trunk/arch/ia64/kernel/topology.c
@@ -9,6 +9,8 @@
* 2002/08/07 Erich Focht
* Populate cpu entries in sysfs for non-numa systems as well
* Intel Corporation - Ashok Raj
+ * 02/27/2006 Zhang, Yanmin
+ * Populate cpu cache entries in sysfs for cpu cache info
*/
#include
@@ -19,6 +21,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -101,3 +104,367 @@ static int __init topology_init(void)
}
subsys_initcall(topology_init);
+
+
+/*
+ * Export cpu cache information through sysfs
+ */
+
+/*
+ * A bunch of string array to get pretty printing
+ */
+static const char *cache_types[] = {
+ "", /* not used */
+ "Instruction",
+ "Data",
+ "Unified" /* unified */
+};
+
+static const char *cache_mattrib[]={
+ "WriteThrough",
+ "WriteBack",
+ "", /* reserved */
+ "" /* reserved */
+};
+
+struct cache_info {
+ pal_cache_config_info_t cci;
+ cpumask_t shared_cpu_map;
+ int level;
+ int type;
+ struct kobject kobj;
+};
+
+struct cpu_cache_info {
+ struct cache_info *cache_leaves;
+ int num_cache_leaves;
+ struct kobject kobj;
+};
+
+static struct cpu_cache_info all_cpu_cache_info[NR_CPUS];
+#define LEAF_KOBJECT_PTR(x,y) (&all_cpu_cache_info[x].cache_leaves[y])
+
+#ifdef CONFIG_SMP
+static void cache_shared_cpu_map_setup( unsigned int cpu,
+ struct cache_info * this_leaf)
+{
+ pal_cache_shared_info_t csi;
+ int num_shared, i = 0;
+ unsigned int j;
+
+ if (cpu_data(cpu)->threads_per_core <= 1 &&
+ cpu_data(cpu)->cores_per_socket <= 1) {
+ cpu_set(cpu, this_leaf->shared_cpu_map);
+ return;
+ }
+
+ if (ia64_pal_cache_shared_info(this_leaf->level,
+ this_leaf->type,
+ 0,
+ &csi) != PAL_STATUS_SUCCESS)
+ return;
+
+ num_shared = (int) csi.num_shared;
+ do {
+ for_each_cpu(j)
+ if (cpu_data(cpu)->socket_id == cpu_data(j)->socket_id
+ && cpu_data(j)->core_id == csi.log1_cid
+ && cpu_data(j)->thread_id == csi.log1_tid)
+ cpu_set(j, this_leaf->shared_cpu_map);
+
+ i++;
+ } while (i < num_shared &&
+ ia64_pal_cache_shared_info(this_leaf->level,
+ this_leaf->type,
+ i,
+ &csi) == PAL_STATUS_SUCCESS);
+}
+#else
+static void cache_shared_cpu_map_setup(unsigned int cpu,
+ struct cache_info * this_leaf)
+{
+ cpu_set(cpu, this_leaf->shared_cpu_map);
+ return;
+}
+#endif
+
+static ssize_t show_coherency_line_size(struct cache_info *this_leaf,
+ char *buf)
+{
+ return sprintf(buf, "%u\n", 1 << this_leaf->cci.pcci_line_size);
+}
+
+static ssize_t show_ways_of_associativity(struct cache_info *this_leaf,
+ char *buf)
+{
+ return sprintf(buf, "%u\n", this_leaf->cci.pcci_assoc);
+}
+
+static ssize_t show_attributes(struct cache_info *this_leaf, char *buf)
+{
+ return sprintf(buf,
+ "%s\n",
+ cache_mattrib[this_leaf->cci.pcci_cache_attr]);
+}
+
+static ssize_t show_size(struct cache_info *this_leaf, char *buf)
+{
+ return sprintf(buf, "%uK\n", this_leaf->cci.pcci_cache_size / 1024);
+}
+
+static ssize_t show_number_of_sets(struct cache_info *this_leaf, char *buf)
+{
+ unsigned number_of_sets = this_leaf->cci.pcci_cache_size;
+ number_of_sets /= this_leaf->cci.pcci_assoc;
+ number_of_sets /= 1 << this_leaf->cci.pcci_line_size;
+
+ return sprintf(buf, "%u\n", number_of_sets);
+}
+
+static ssize_t show_shared_cpu_map(struct cache_info *this_leaf, char *buf)
+{
+ ssize_t len;
+ cpumask_t shared_cpu_map;
+
+ cpus_and(shared_cpu_map, this_leaf->shared_cpu_map, cpu_online_map);
+ len = cpumask_scnprintf(buf, NR_CPUS+1, shared_cpu_map);
+ len += sprintf(buf+len, "\n");
+ return len;
+}
+
+static ssize_t show_type(struct cache_info *this_leaf, char *buf)
+{
+ int type = this_leaf->type + this_leaf->cci.pcci_unified;
+ return sprintf(buf, "%s\n", cache_types[type]);
+}
+
+static ssize_t show_level(struct cache_info *this_leaf, char *buf)
+{
+ return sprintf(buf, "%u\n", this_leaf->level);
+}
+
+struct cache_attr {
+ struct attribute attr;
+ ssize_t (*show)(struct cache_info *, char *);
+ ssize_t (*store)(struct cache_info *, const char *, size_t count);
+};
+
+#ifdef define_one_ro
+ #undef define_one_ro
+#endif
+#define define_one_ro(_name) \
+ static struct cache_attr _name = \
+__ATTR(_name, 0444, show_##_name, NULL)
+
+define_one_ro(level);
+define_one_ro(type);
+define_one_ro(coherency_line_size);
+define_one_ro(ways_of_associativity);
+define_one_ro(size);
+define_one_ro(number_of_sets);
+define_one_ro(shared_cpu_map);
+define_one_ro(attributes);
+
+static struct attribute * cache_default_attrs[] = {
+ &type.attr,
+ &level.attr,
+ &coherency_line_size.attr,
+ &ways_of_associativity.attr,
+ &attributes.attr,
+ &size.attr,
+ &number_of_sets.attr,
+ &shared_cpu_map.attr,
+ NULL
+};
+
+#define to_object(k) container_of(k, struct cache_info, kobj)
+#define to_attr(a) container_of(a, struct cache_attr, attr)
+
+static ssize_t cache_show(struct kobject * kobj, struct attribute * attr, char * buf)
+{
+ struct cache_attr *fattr = to_attr(attr);
+ struct cache_info *this_leaf = to_object(kobj);
+ ssize_t ret;
+
+ ret = fattr->show ? fattr->show(this_leaf, buf) : 0;
+ return ret;
+}
+
+static struct sysfs_ops cache_sysfs_ops = {
+ .show = cache_show
+};
+
+static struct kobj_type cache_ktype = {
+ .sysfs_ops = &cache_sysfs_ops,
+ .default_attrs = cache_default_attrs,
+};
+
+static struct kobj_type cache_ktype_percpu_entry = {
+ .sysfs_ops = &cache_sysfs_ops,
+};
+
+static void __cpuinit cpu_cache_sysfs_exit(unsigned int cpu)
+{
+ if (all_cpu_cache_info[cpu].cache_leaves) {
+ kfree(all_cpu_cache_info[cpu].cache_leaves);
+ all_cpu_cache_info[cpu].cache_leaves = NULL;
+ }
+ all_cpu_cache_info[cpu].num_cache_leaves = 0;
+ memset(&all_cpu_cache_info[cpu].kobj, 0, sizeof(struct kobject));
+
+ return;
+}
+
+static int __cpuinit cpu_cache_sysfs_init(unsigned int cpu)
+{
+ u64 i, levels, unique_caches;
+ pal_cache_config_info_t cci;
+ int j;
+ s64 status;
+ struct cache_info *this_cache;
+ int num_cache_leaves = 0;
+
+ if ((status = ia64_pal_cache_summary(&levels, &unique_caches)) != 0) {
+ printk(KERN_ERR "ia64_pal_cache_summary=%ld\n", status);
+ return -1;
+ }
+
+ this_cache=kzalloc(sizeof(struct cache_info)*unique_caches,
+ GFP_KERNEL);
+ if (this_cache == NULL)
+ return -ENOMEM;
+
+ for (i=0; i < levels; i++) {
+ for (j=2; j >0 ; j--) {
+ if ((status=ia64_pal_cache_config_info(i,j, &cci)) !=
+ PAL_STATUS_SUCCESS)
+ continue;
+
+ this_cache[num_cache_leaves].cci = cci;
+ this_cache[num_cache_leaves].level = i + 1;
+ this_cache[num_cache_leaves].type = j;
+
+ cache_shared_cpu_map_setup(cpu,
+ &this_cache[num_cache_leaves]);
+ num_cache_leaves ++;
+ }
+ }
+
+ all_cpu_cache_info[cpu].cache_leaves = this_cache;
+ all_cpu_cache_info[cpu].num_cache_leaves = num_cache_leaves;
+
+ memset(&all_cpu_cache_info[cpu].kobj, 0, sizeof(struct kobject));
+
+ return 0;
+}
+
+/* Add cache interface for CPU device */
+static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
+{
+ unsigned int cpu = sys_dev->id;
+ unsigned long i, j;
+ struct cache_info *this_object;
+ int retval = 0;
+ cpumask_t oldmask;
+
+ if (all_cpu_cache_info[cpu].kobj.parent)
+ return 0;
+
+ oldmask = current->cpus_allowed;
+ retval = set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ if (unlikely(retval))
+ return retval;
+
+ retval = cpu_cache_sysfs_init(cpu);
+ set_cpus_allowed(current, oldmask);
+ if (unlikely(retval < 0))
+ return retval;
+
+ all_cpu_cache_info[cpu].kobj.parent = &sys_dev->kobj;
+ kobject_set_name(&all_cpu_cache_info[cpu].kobj, "%s", "cache");
+ all_cpu_cache_info[cpu].kobj.ktype = &cache_ktype_percpu_entry;
+ retval = kobject_register(&all_cpu_cache_info[cpu].kobj);
+
+ for (i = 0; i < all_cpu_cache_info[cpu].num_cache_leaves; i++) {
+ this_object = LEAF_KOBJECT_PTR(cpu,i);
+ this_object->kobj.parent = &all_cpu_cache_info[cpu].kobj;
+ kobject_set_name(&(this_object->kobj), "index%1lu", i);
+ this_object->kobj.ktype = &cache_ktype;
+ retval = kobject_register(&(this_object->kobj));
+ if (unlikely(retval)) {
+ for (j = 0; j < i; j++) {
+ kobject_unregister(
+ &(LEAF_KOBJECT_PTR(cpu,j)->kobj));
+ }
+ kobject_unregister(&all_cpu_cache_info[cpu].kobj);
+ cpu_cache_sysfs_exit(cpu);
+ break;
+ }
+ }
+ return retval;
+}
+
+/* Remove cache interface for CPU device */
+static int __cpuinit cache_remove_dev(struct sys_device * sys_dev)
+{
+ unsigned int cpu = sys_dev->id;
+ unsigned long i;
+
+ for (i = 0; i < all_cpu_cache_info[cpu].num_cache_leaves; i++)
+ kobject_unregister(&(LEAF_KOBJECT_PTR(cpu,i)->kobj));
+
+ if (all_cpu_cache_info[cpu].kobj.parent) {
+ kobject_unregister(&all_cpu_cache_info[cpu].kobj);
+ memset(&all_cpu_cache_info[cpu].kobj,
+ 0,
+ sizeof(struct kobject));
+ }
+
+ cpu_cache_sysfs_exit(cpu);
+
+ return 0;
+}
+
+/*
+ * When a cpu is hot-plugged, do a check and initiate
+ * cache kobject if necessary
+ */
+static int __cpuinit cache_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+ struct sys_device *sys_dev;
+
+ sys_dev = get_cpu_sysdev(cpu);
+ switch (action) {
+ case CPU_ONLINE:
+ cache_add_dev(sys_dev);
+ break;
+ case CPU_DEAD:
+ cache_remove_dev(sys_dev);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block cache_cpu_notifier =
+{
+ .notifier_call = cache_cpu_callback
+};
+
+static int __cpuinit cache_sysfs_init(void)
+{
+ int i;
+
+ for_each_online_cpu(i) {
+ cache_cpu_callback(&cache_cpu_notifier, CPU_ONLINE,
+ (void *)(long)i);
+ }
+
+ register_cpu_notifier(&cache_cpu_notifier);
+
+ return 0;
+}
+
+device_initcall(cache_sysfs_init);
+
diff --git a/trunk/arch/ia64/kernel/vmlinux.lds.S b/trunk/arch/ia64/kernel/vmlinux.lds.S
index 0b9e56dd7f05..783600fe52b2 100644
--- a/trunk/arch/ia64/kernel/vmlinux.lds.S
+++ b/trunk/arch/ia64/kernel/vmlinux.lds.S
@@ -70,6 +70,15 @@ SECTIONS
__stop___ex_table = .;
}
+ /* MCA table */
+ . = ALIGN(16);
+ __mca_table : AT(ADDR(__mca_table) - LOAD_OFFSET)
+ {
+ __start___mca_table = .;
+ *(__mca_table)
+ __stop___mca_table = .;
+ }
+
/* Global data */
_data = .;
@@ -130,15 +139,6 @@ SECTIONS
__initcall_end = .;
}
- /* MCA table */
- . = ALIGN(16);
- __mca_table : AT(ADDR(__mca_table) - LOAD_OFFSET)
- {
- __start___mca_table = .;
- *(__mca_table)
- __stop___mca_table = .;
- }
-
.data.patch.vtop : AT(ADDR(.data.patch.vtop) - LOAD_OFFSET)
{
__start___vtop_patchlist = .;
diff --git a/trunk/arch/ia64/mm/init.c b/trunk/arch/ia64/mm/init.c
index 2ef1151cde90..cafa8776a53d 100644
--- a/trunk/arch/ia64/mm/init.c
+++ b/trunk/arch/ia64/mm/init.c
@@ -109,6 +109,7 @@ lazy_mmu_prot_update (pte_t pte)
{
unsigned long addr;
struct page *page;
+ unsigned long order;
if (!pte_exec(pte))
return; /* not an executable page... */
@@ -119,7 +120,12 @@ lazy_mmu_prot_update (pte_t pte)
if (test_bit(PG_arch_1, &page->flags))
return; /* i-cache is already coherent with d-cache */
- flush_icache_range(addr, addr + PAGE_SIZE);
+ if (PageCompound(page)) {
+ order = (unsigned long) (page[1].lru.prev);
+ flush_icache_range(addr, addr + (1UL << order << PAGE_SHIFT));
+ }
+ else
+ flush_icache_range(addr, addr + PAGE_SIZE);
set_bit(PG_arch_1, &page->flags); /* mark page as clean */
}
diff --git a/trunk/arch/ia64/mm/ioremap.c b/trunk/arch/ia64/mm/ioremap.c
index 62328621f99c..643ccc6960ce 100644
--- a/trunk/arch/ia64/mm/ioremap.c
+++ b/trunk/arch/ia64/mm/ioremap.c
@@ -21,12 +21,12 @@ __ioremap (unsigned long offset, unsigned long size)
void __iomem *
ioremap (unsigned long offset, unsigned long size)
{
- if (efi_mem_attribute_range(offset, size, EFI_MEMORY_UC))
- return __ioremap(offset, size);
-
if (efi_mem_attribute_range(offset, size, EFI_MEMORY_WB))
return phys_to_virt(offset);
+ if (efi_mem_attribute_range(offset, size, EFI_MEMORY_UC))
+ return __ioremap(offset, size);
+
/*
* Someday this should check ACPI resources so we
* can do the right thing for hot-plugged regions.
diff --git a/trunk/arch/ia64/mm/tlb.c b/trunk/arch/ia64/mm/tlb.c
index 6a4eec9113e8..4dbbca0b5e9c 100644
--- a/trunk/arch/ia64/mm/tlb.c
+++ b/trunk/arch/ia64/mm/tlb.c
@@ -156,17 +156,19 @@ flush_tlb_range (struct vm_area_struct *vma, unsigned long start,
nbits = purge.max_bits;
start &= ~((1UL << nbits) - 1);
-# ifdef CONFIG_SMP
- platform_global_tlb_purge(mm, start, end, nbits);
-# else
preempt_disable();
+#ifdef CONFIG_SMP
+ if (mm != current->active_mm || cpus_weight(mm->cpu_vm_mask) != 1) {
+ platform_global_tlb_purge(mm, start, end, nbits);
+ preempt_enable();
+ return;
+ }
+#endif
do {
ia64_ptcl(start, (nbits<<2));
start += (1UL << nbits);
} while (start < end);
preempt_enable();
-# endif
-
ia64_srlz_i(); /* srlz.i implies srlz.d */
}
EXPORT_SYMBOL(flush_tlb_range);
diff --git a/trunk/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/trunk/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 70db21f3df21..d917afa30b27 100644
--- a/trunk/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/trunk/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -110,7 +110,11 @@ static int sn_hwperf_geoid_to_cnode(char *location)
if (sn_hwperf_location_to_bpos(location, &rack, &bay, &slot, &slab))
return -1;
- for_each_node(cnode) {
+ /*
+ * FIXME: replace with cleaner for_each_XXX macro which addresses
+ * both compute and IO nodes once ACPI3.0 is available.
+ */
+ for (cnode = 0; cnode < num_cnodes; cnode++) {
geoid = cnodeid_get_geoid(cnode);
module_id = geo_module(geoid);
this_rack = MODULE_GET_RACK(module_id);
@@ -605,7 +609,7 @@ static int sn_hwperf_op_cpu(struct sn_hwperf_op_info *op_info)
op_info->a->arg &= SN_HWPERF_ARG_OBJID_MASK;
if (cpu != SN_HWPERF_ARG_ANY_CPU) {
- if (cpu >= num_online_cpus() || !cpu_online(cpu)) {
+ if (cpu >= NR_CPUS || !cpu_online(cpu)) {
r = -EINVAL;
goto out;
}
diff --git a/trunk/arch/m68k/kernel/m68k_ksyms.c b/trunk/arch/m68k/kernel/m68k_ksyms.c
index 3d7f2000b714..c3319514a85e 100644
--- a/trunk/arch/m68k/kernel/m68k_ksyms.c
+++ b/trunk/arch/m68k/kernel/m68k_ksyms.c
@@ -79,4 +79,3 @@ EXPORT_SYMBOL(__down_failed_interruptible);
EXPORT_SYMBOL(__down_failed_trylock);
EXPORT_SYMBOL(__up_wakeup);
-EXPORT_SYMBOL(get_wchan);
diff --git a/trunk/arch/m68knommu/kernel/m68k_ksyms.c b/trunk/arch/m68knommu/kernel/m68k_ksyms.c
index d844c755945a..f9b4ea16c099 100644
--- a/trunk/arch/m68knommu/kernel/m68k_ksyms.c
+++ b/trunk/arch/m68knommu/kernel/m68k_ksyms.c
@@ -57,8 +57,6 @@ EXPORT_SYMBOL(__down_failed_interruptible);
EXPORT_SYMBOL(__down_failed_trylock);
EXPORT_SYMBOL(__up_wakeup);
-EXPORT_SYMBOL(get_wchan);
-
/*
* libgcc functions - functions that are used internally by the
* compiler... (prototypes are not correct though, but that
diff --git a/trunk/arch/mips/kernel/process.c b/trunk/arch/mips/kernel/process.c
index a8f435d82940..c66db5e5ab62 100644
--- a/trunk/arch/mips/kernel/process.c
+++ b/trunk/arch/mips/kernel/process.c
@@ -419,4 +419,3 @@ unsigned long get_wchan(struct task_struct *p)
return pc;
}
-EXPORT_SYMBOL(get_wchan);
diff --git a/trunk/arch/parisc/Kconfig b/trunk/arch/parisc/Kconfig
index 6b3c50964ca9..2fdf21989dc2 100644
--- a/trunk/arch/parisc/Kconfig
+++ b/trunk/arch/parisc/Kconfig
@@ -177,14 +177,10 @@ config ARCH_DISCONTIGMEM_DEFAULT
def_bool y
depends on ARCH_DISCONTIGMEM_ENABLE
+source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
source "mm/Kconfig"
-config PREEMPT
- bool
-# bool "Preemptible Kernel"
- default n
-
config COMPAT
def_bool y
depends on 64BIT
diff --git a/trunk/arch/parisc/configs/712_defconfig b/trunk/arch/parisc/configs/712_defconfig
index 3e013f55df64..41fd0696bbe7 100644
--- a/trunk/arch/parisc/configs/712_defconfig
+++ b/trunk/arch/parisc/configs/712_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc5-pa1
-# Fri Oct 21 23:04:34 2005
+# Linux kernel version: 2.6.16-pa6
+# Sun Mar 26 19:59:51 2006
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -10,14 +10,11 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -32,17 +29,18 @@ CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -51,8 +49,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -65,6 +65,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
@@ -75,6 +92,10 @@ CONFIG_PA7100LC=y
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
# CONFIG_SMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
@@ -86,7 +107,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_PREEMPT is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_HPUX is not set
#
@@ -130,6 +151,7 @@ CONFIG_NET=y
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -165,7 +187,12 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
@@ -182,64 +209,6 @@ CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
@@ -250,6 +219,11 @@ CONFIG_IP_NF_ARP_MANGLE=m
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -263,8 +237,11 @@ CONFIG_LLC2=m
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -304,6 +281,7 @@ CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_1284 is not set
@@ -314,7 +292,6 @@ CONFIG_PARPORT_GSC=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
@@ -325,14 +302,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
@@ -376,6 +345,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
@@ -407,7 +377,6 @@ CONFIG_MD_RAID1=m
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
@@ -471,6 +440,7 @@ CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
@@ -516,8 +486,8 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_HIL_OLD=y
-# CONFIG_KEYBOARD_HIL is not set
+# CONFIG_KEYBOARD_HIL_OLD is not set
+CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
@@ -554,6 +524,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=17
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -598,12 +569,20 @@ CONFIG_MAX_RAW_DEVS=256
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -640,7 +619,6 @@ CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
@@ -655,6 +633,7 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
@@ -695,6 +674,8 @@ CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
@@ -723,6 +704,10 @@ CONFIG_SND_HARMONY=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
#
# USB Gadget Support
#
@@ -736,10 +721,9 @@ CONFIG_SND_HARMONY=y
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
@@ -765,6 +749,7 @@ CONFIG_XFS_EXPORT=y
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -800,10 +785,10 @@ CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -821,7 +806,6 @@ CONFIG_RAMFS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
@@ -917,18 +901,22 @@ CONFIG_OPROFILE=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_IOREMAP is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_RODATA=y
#
# Security options
diff --git a/trunk/arch/parisc/configs/a500_defconfig b/trunk/arch/parisc/configs/a500_defconfig
index 959ad3c4e372..f3b812f04592 100644
--- a/trunk/arch/parisc/configs/a500_defconfig
+++ b/trunk/arch/parisc/configs/a500_defconfig
@@ -1031,8 +1031,8 @@ CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
diff --git a/trunk/arch/parisc/configs/b180_defconfig b/trunk/arch/parisc/configs/b180_defconfig
index 37e98241ce4b..35093612ad2c 100644
--- a/trunk/arch/parisc/configs/b180_defconfig
+++ b/trunk/arch/parisc/configs/b180_defconfig
@@ -939,10 +939,10 @@ CONFIG_MSDOS_PARTITION=y
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
@@ -962,8 +962,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
@@ -973,10 +973,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=m
#
# Kernel hacking
diff --git a/trunk/arch/parisc/configs/c3000_defconfig b/trunk/arch/parisc/configs/c3000_defconfig
index 0b1c8c1fa8a3..782906b644dd 100644
--- a/trunk/arch/parisc/configs/c3000_defconfig
+++ b/trunk/arch/parisc/configs/c3000_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc5-pa1
-# Fri Oct 21 23:06:31 2005
+# Linux kernel version: 2.6.16-pa6
+# Sun Mar 26 20:03:29 2006
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -10,14 +10,11 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -32,28 +29,30 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -66,6 +65,23 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
@@ -78,6 +94,10 @@ CONFIG_PA20=y
CONFIG_PREFETCH=y
# CONFIG_64BIT is not set
# CONFIG_SMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
@@ -89,7 +109,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_PREEMPT is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_HPUX is not set
#
@@ -135,6 +155,7 @@ CONFIG_NET=y
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -175,7 +196,12 @@ CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
+
+#
+# Core Netfilter Configuration
+#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
@@ -192,87 +218,11 @@ CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_DCCP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_MATCH_STRING is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_LIMIT is not set
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
-CONFIG_IP6_NF_MATCH_OWNER=m
-# CONFIG_IP6_NF_MATCH_MARK is not set
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-CONFIG_IP6_NF_MATCH_LENGTH=m
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_MARK is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_RAW is not set
#
# DCCP Configuration (EXPERIMENTAL)
@@ -283,6 +233,11 @@ CONFIG_IP6_NF_MANGLE=m
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -295,8 +250,11 @@ CONFIG_IP6_NF_MANGLE=m
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -341,7 +299,6 @@ CONFIG_FW_LOADER=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -355,14 +312,6 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@@ -458,6 +407,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -466,7 +416,6 @@ CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
@@ -476,18 +425,18 @@ CONFIG_SCSI_SATA=y
CONFIG_SCSI_ATA_PIIX=m
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
-CONFIG_SCSI_SATA_PROMISE=m
+# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
+CONFIG_SCSI_SATA_PROMISE=m
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SATA_SIL=m
+# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=m
# CONFIG_SCSI_SATA_VITESSE is not set
CONFIG_SCSI_SATA_INTEL_COMBINED=y
-# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
@@ -496,18 +445,11 @@ CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -633,6 +575,7 @@ CONFIG_E1000=m
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
@@ -668,6 +611,7 @@ CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
@@ -744,6 +688,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=13
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -753,7 +698,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_MUX is not set
# CONFIG_PDC_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -788,12 +732,19 @@ CONFIG_MAX_RAW_DEVS=256
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -830,7 +781,6 @@ CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
@@ -840,6 +790,7 @@ CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
@@ -853,10 +804,7 @@ CONFIG_FB_STI=y
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -866,6 +814,7 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
@@ -898,23 +847,27 @@ CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -923,39 +876,38 @@ CONFIG_SND_AC97_BUS=y
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_AD1889=y
-# CONFIG_SND_AD1889_OPL3 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
@@ -998,12 +950,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1015,12 +970,15 @@ CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
@@ -1034,6 +992,7 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1108,7 +1067,7 @@ CONFIG_USB_LEGOTOWER=m
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
@@ -1130,6 +1089,7 @@ CONFIG_XFS_EXPORT=y
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1164,10 +1124,10 @@ CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1225,10 +1185,10 @@ CONFIG_MSDOS_PARTITION=y
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
@@ -1248,8 +1208,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
@@ -1259,10 +1219,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=m
#
# Profiling support
@@ -1274,18 +1234,22 @@ CONFIG_OPROFILE=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_IOREMAP is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_RODATA=y
#
# Security options
diff --git a/trunk/arch/parisc/defconfig b/trunk/arch/parisc/defconfig
index f38a4620d24f..59f7bc38e72e 100644
--- a/trunk/arch/parisc/defconfig
+++ b/trunk/arch/parisc/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc5-pa1
-# Fri Oct 21 23:01:33 2005
+# Linux kernel version: 2.6.16-pa6
+# Sun Mar 26 19:50:07 2006
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -15,7 +15,6 @@ CONFIG_GENERIC_IRQ_PROBE=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -30,17 +29,18 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -49,14 +49,33 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
@@ -67,6 +86,10 @@ CONFIG_PA7000=y
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
# CONFIG_SMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
@@ -78,7 +101,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_PREEMPT is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_HPUX is not set
#
@@ -132,6 +155,7 @@ CONFIG_NET=y
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -174,6 +198,11 @@ CONFIG_IPV6=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -186,8 +215,11 @@ CONFIG_IPV6=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -228,6 +260,7 @@ CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_1284 is not set
@@ -254,14 +287,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@@ -305,6 +330,7 @@ CONFIG_SCSI_SPI_ATTRS=y
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -331,7 +357,7 @@ CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
@@ -340,13 +366,7 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_DC395x is not set
@@ -471,6 +491,7 @@ CONFIG_ACENIC=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@@ -562,13 +583,13 @@ CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_HIL_OLD=y
+# CONFIG_KEYBOARD_HIL_OLD is not set
CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_HIL is not set
+CONFIG_MOUSE_HIL=y
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
@@ -628,6 +649,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=13
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -675,12 +697,19 @@ CONFIG_GEN_RTC=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -691,6 +720,7 @@ CONFIG_GEN_RTC=y
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -718,7 +748,6 @@ CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
@@ -728,6 +757,7 @@ CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
@@ -741,9 +771,7 @@ CONFIG_FB_STI=y
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -753,15 +781,28 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
-# CONFIG_LOGO is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_PARISC_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -781,23 +822,27 @@ CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -806,39 +851,38 @@ CONFIG_SND_AC97_BUS=y
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_AD1889=y
-# CONFIG_SND_AD1889_OPL3 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
@@ -888,14 +932,18 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
@@ -918,6 +966,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -994,7 +1043,7 @@ CONFIG_USB_MON=y
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
@@ -1011,6 +1060,7 @@ CONFIG_JBD=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1045,6 +1095,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1151,18 +1202,22 @@ CONFIG_OPROFILE=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_IOREMAP is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_RODATA=y
#
# Security options
diff --git a/trunk/arch/parisc/kernel/cache.c b/trunk/arch/parisc/kernel/cache.c
index d8a4ca021aac..360b7391cb8c 100644
--- a/trunk/arch/parisc/kernel/cache.c
+++ b/trunk/arch/parisc/kernel/cache.c
@@ -89,7 +89,7 @@ update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
if (pfn_valid(page_to_pfn(page)) && page_mapping(page) &&
test_bit(PG_dcache_dirty, &page->flags)) {
- flush_kernel_dcache_page(page_address(page));
+ flush_kernel_dcache_page(page);
clear_bit(PG_dcache_dirty, &page->flags);
}
}
@@ -278,7 +278,7 @@ void flush_dcache_page(struct page *page)
return;
}
- flush_kernel_dcache_page(page_address(page));
+ flush_kernel_dcache_page(page);
if (!mapping)
return;
@@ -317,7 +317,7 @@ EXPORT_SYMBOL(flush_dcache_page);
/* Defined in arch/parisc/kernel/pacache.S */
EXPORT_SYMBOL(flush_kernel_dcache_range_asm);
-EXPORT_SYMBOL(flush_kernel_dcache_page);
+EXPORT_SYMBOL(flush_kernel_dcache_page_asm);
EXPORT_SYMBOL(flush_data_cache_local);
EXPORT_SYMBOL(flush_kernel_icache_range_asm);
diff --git a/trunk/arch/parisc/kernel/entry.S b/trunk/arch/parisc/kernel/entry.S
index 9af4b22a6d77..7c95d7663c29 100644
--- a/trunk/arch/parisc/kernel/entry.S
+++ b/trunk/arch/parisc/kernel/entry.S
@@ -563,10 +563,10 @@
extrd,u,*= \pte,_PAGE_GATEWAY_BIT+32,1,%r0
depd %r0,11,2,\prot /* If Gateway, Set PL2 to 0 */
- /* Get rid of prot bits and convert to page addr for iitlbt */
+ /* Get rid of prot bits and convert to page addr for iitlbt and idtlbt */
depd %r0,63,PAGE_SHIFT,\pte
- extrd,u \pte,56,32,\pte
+ extrd,s \pte,(63-PAGE_SHIFT)+(63-58),64-PAGE_SHIFT,\pte
.endm
/* Identical macro to make_insert_tlb above, except it
@@ -584,7 +584,7 @@
/* Get rid of prot bits and convert to page addr for iitlba */
- depi 0,31,12,\pte
+ depi 0,31,PAGE_SHIFT,\pte
extru \pte,24,25,\pte
.endm
@@ -1014,14 +1014,21 @@ intr_restore:
nop
nop
+#ifndef CONFIG_PREEMPT
+# define intr_do_preempt intr_restore
+#endif /* !CONFIG_PREEMPT */
+
.import schedule,code
intr_do_resched:
- /* Only do reschedule if we are returning to user space */
+ /* Only call schedule on return to userspace. If we're returning
+ * to kernel space, we may schedule if CONFIG_PREEMPT, otherwise
+ * we jump back to intr_restore.
+ */
LDREG PT_IASQ0(%r16), %r20
- CMPIB= 0,%r20,intr_restore /* backward */
+ CMPIB= 0, %r20, intr_do_preempt
nop
LDREG PT_IASQ1(%r16), %r20
- CMPIB= 0,%r20,intr_restore /* backward */
+ CMPIB= 0, %r20, intr_do_preempt
nop
#ifdef CONFIG_64BIT
@@ -1037,6 +1044,32 @@ intr_do_resched:
#endif
ldo R%intr_check_sig(%r2), %r2
+ /* preempt the current task on returning to kernel
+ * mode from an interrupt, iff need_resched is set,
+ * and preempt_count is 0. otherwise, we continue on
+ * our merry way back to the current running task.
+ */
+#ifdef CONFIG_PREEMPT
+ .import preempt_schedule_irq,code
+intr_do_preempt:
+ rsm PSW_SM_I, %r0 /* disable interrupts */
+
+ /* current_thread_info()->preempt_count */
+ mfctl %cr30, %r1
+ LDREG TI_PRE_COUNT(%r1), %r19
+ CMPIB<> 0, %r19, intr_restore /* if preempt_count > 0 */
+ nop /* prev insn branched backwards */
+
+ /* check if we interrupted a critical path */
+ LDREG PT_PSW(%r16), %r20
+ bb,<,n %r20, 31 - PSW_SM_I, intr_restore
+ nop
+
+ BL preempt_schedule_irq, %r2
+ nop
+
+ b intr_restore /* ssm PSW_SM_I done by intr_restore */
+#endif /* CONFIG_PREEMPT */
.import do_signal,code
intr_do_signal:
diff --git a/trunk/arch/parisc/kernel/pacache.S b/trunk/arch/parisc/kernel/pacache.S
index 9534ee17b9be..7a4f07e8d3c3 100644
--- a/trunk/arch/parisc/kernel/pacache.S
+++ b/trunk/arch/parisc/kernel/pacache.S
@@ -621,9 +621,9 @@ __clear_user_page_asm:
.procend
- .export flush_kernel_dcache_page
+ .export flush_kernel_dcache_page_asm
-flush_kernel_dcache_page:
+flush_kernel_dcache_page_asm:
.proc
.callinfo NO_CALLS
.entry
diff --git a/trunk/arch/parisc/kernel/parisc_ksyms.c b/trunk/arch/parisc/kernel/parisc_ksyms.c
index 1d00c365f2b1..47ca5c0a323b 100644
--- a/trunk/arch/parisc/kernel/parisc_ksyms.c
+++ b/trunk/arch/parisc/kernel/parisc_ksyms.c
@@ -30,22 +30,7 @@
#include
#include
-EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memscan);
EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strncmp);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strnlen);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strpbrk);
#include
@@ -82,16 +67,12 @@ EXPORT_SYMBOL($global$);
#endif
#include
-EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(memcpy_toio);
EXPORT_SYMBOL(memcpy_fromio);
EXPORT_SYMBOL(memset_io);
#include
-EXPORT_SYMBOL(sys_open);
EXPORT_SYMBOL(sys_lseek);
-EXPORT_SYMBOL(sys_read);
EXPORT_SYMBOL(sys_write);
#include
diff --git a/trunk/arch/parisc/kernel/pdc_chassis.c b/trunk/arch/parisc/kernel/pdc_chassis.c
index 0cea6958f427..a45e2e2ffd9f 100644
--- a/trunk/arch/parisc/kernel/pdc_chassis.c
+++ b/trunk/arch/parisc/kernel/pdc_chassis.c
@@ -5,9 +5,8 @@
* Copyright (C) 2002-2004 Thibaut VARENE
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/trunk/arch/parisc/kernel/perf.c b/trunk/arch/parisc/kernel/perf.c
index 53f861c82f93..ac8ee205c351 100644
--- a/trunk/arch/parisc/kernel/perf.c
+++ b/trunk/arch/parisc/kernel/perf.c
@@ -805,7 +805,7 @@ static int perf_write_image(uint64_t *memaddr)
return -1;
}
- runway = ioremap(cpu_device->hpa.start, 4096);
+ runway = ioremap_nocache(cpu_device->hpa.start, 4096);
/* Merge intrigue bits into Runway STATUS 0 */
tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful;
diff --git a/trunk/arch/parisc/kernel/syscall_table.S b/trunk/arch/parisc/kernel/syscall_table.S
index 89b6c56ea0a8..bbeeb614cfab 100644
--- a/trunk/arch/parisc/kernel/syscall_table.S
+++ b/trunk/arch/parisc/kernel/syscall_table.S
@@ -287,7 +287,7 @@
ENTRY_SAME(chown) /* 180 */
/* setsockopt() used by iptables: SO_SET_REPLACE/SO_SET_ADD_COUNTERS */
ENTRY_COMP(setsockopt)
- ENTRY_SAME(getsockopt)
+ ENTRY_COMP(getsockopt)
ENTRY_COMP(sendmsg)
ENTRY_COMP(recvmsg)
ENTRY_SAME(semop) /* 185 */
diff --git a/trunk/arch/parisc/lib/iomap.c b/trunk/arch/parisc/lib/iomap.c
index 01bec8fcbd0d..f4a811690ab3 100644
--- a/trunk/arch/parisc/lib/iomap.c
+++ b/trunk/arch/parisc/lib/iomap.c
@@ -263,11 +263,7 @@ static const struct iomap_ops iomem_ops = {
const struct iomap_ops *iomap_ops[8] = {
[0] = &ioport_ops,
-#ifdef CONFIG_DEBUG_IOREMAP
- [6] = &iomem_ops,
-#else
[7] = &iomem_ops
-#endif
};
diff --git a/trunk/arch/parisc/mm/init.c b/trunk/arch/parisc/mm/init.c
index 852eda3953dc..3796be67cd53 100644
--- a/trunk/arch/parisc/mm/init.c
+++ b/trunk/arch/parisc/mm/init.c
@@ -1013,9 +1013,9 @@ void flush_tlb_all(void)
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
-#if 0
- if (start < end)
- printk(KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+ if (start >= end)
+ return;
+ printk(KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
for (; start < end; start += PAGE_SIZE) {
ClearPageReserved(virt_to_page(start));
init_page_count(virt_to_page(start));
@@ -1023,6 +1023,5 @@ void free_initrd_mem(unsigned long start, unsigned long end)
num_physpages++;
totalram_pages++;
}
-#endif
}
#endif
diff --git a/trunk/arch/parisc/mm/ioremap.c b/trunk/arch/parisc/mm/ioremap.c
index edd9a9559cba..0db12818d7bc 100644
--- a/trunk/arch/parisc/mm/ioremap.c
+++ b/trunk/arch/parisc/mm/ioremap.c
@@ -72,7 +72,6 @@ remap_area_pmd(pmd_t *pmd, unsigned long address, unsigned long size,
return 0;
}
-#if USE_HPPA_IOREMAP
static int
remap_area_pages(unsigned long address, unsigned long phys_addr,
unsigned long size, unsigned long flags)
@@ -114,31 +113,6 @@ remap_area_pages(unsigned long address, unsigned long phys_addr,
return error;
}
-#endif /* USE_HPPA_IOREMAP */
-
-#ifdef CONFIG_DEBUG_IOREMAP
-static unsigned long last = 0;
-
-void gsc_bad_addr(unsigned long addr)
-{
- if (time_after(jiffies, last + HZ*10)) {
- printk("gsc_foo() called with bad address 0x%lx\n", addr);
- dump_stack();
- last = jiffies;
- }
-}
-EXPORT_SYMBOL(gsc_bad_addr);
-
-void __raw_bad_addr(const volatile void __iomem *addr)
-{
- if (time_after(jiffies, last + HZ*10)) {
- printk("__raw_foo() called with bad address 0x%p\n", addr);
- dump_stack();
- last = jiffies;
- }
-}
-EXPORT_SYMBOL(__raw_bad_addr);
-#endif
/*
* Generic mapping function (not visible outside):
@@ -154,26 +128,19 @@ EXPORT_SYMBOL(__raw_bad_addr);
*/
void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags)
{
-#if !(USE_HPPA_IOREMAP)
+ void *addr;
+ struct vm_struct *area;
+ unsigned long offset, last_addr;
+#ifdef CONFIG_EISA
unsigned long end = phys_addr + size - 1;
/* Support EISA addresses */
- if ((phys_addr >= 0x00080000 && end < 0x000fffff)
- || (phys_addr >= 0x00500000 && end < 0x03bfffff)) {
- phys_addr |= 0xfc000000;
+ if ((phys_addr >= 0x00080000 && end < 0x000fffff) ||
+ (phys_addr >= 0x00500000 && end < 0x03bfffff)) {
+ phys_addr |= F_EXTEND(0xfc000000);
}
-
-#ifdef CONFIG_DEBUG_IOREMAP
- return (void __iomem *)(phys_addr - (0x1UL << NYBBLE_SHIFT));
-#else
- return (void __iomem *)phys_addr;
#endif
-#else
- void *addr;
- struct vm_struct *area;
- unsigned long offset, last_addr;
-
/* Don't allow wraparound or zero size */
last_addr = phys_addr + size - 1;
if (!size || last_addr < phys_addr)
@@ -217,15 +184,12 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l
}
return (void __iomem *) (offset + (char *)addr);
-#endif
}
+EXPORT_SYMBOL(__ioremap);
void iounmap(void __iomem *addr)
{
-#if !(USE_HPPA_IOREMAP)
- return;
-#else
if (addr > high_memory)
return vfree((void *) (PAGE_MASK & (unsigned long __force) addr));
-#endif
}
+EXPORT_SYMBOL(iounmap);
diff --git a/trunk/arch/powerpc/Kconfig b/trunk/arch/powerpc/Kconfig
index a433b7126d33..2cdc35ce8045 100644
--- a/trunk/arch/powerpc/Kconfig
+++ b/trunk/arch/powerpc/Kconfig
@@ -491,7 +491,7 @@ config PPC601_SYNC_FIX
If in doubt, say Y here.
config TAU
- bool "Thermal Management Support"
+ bool "On-chip CPU temperature sensor support"
depends on 6xx
help
G3 and G4 processors have an on-chip temperature sensor called the
@@ -500,7 +500,7 @@ config TAU
on-die temperature in /proc/cpuinfo if the cpu supports it.
Unfortunately, on some chip revisions, this sensor is very inaccurate
- and in some cases, does not work at all, so don't assume the cpu
+ and in many cases, does not work at all, so don't assume the cpu
temp is actually what /proc/cpuinfo says it is.
config TAU_INT
diff --git a/trunk/arch/powerpc/Kconfig.debug b/trunk/arch/powerpc/Kconfig.debug
index 9254806f7032..8d48e9e7162a 100644
--- a/trunk/arch/powerpc/Kconfig.debug
+++ b/trunk/arch/powerpc/Kconfig.debug
@@ -110,11 +110,6 @@ config SERIAL_TEXT_DEBUG
depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
PPC_GEN550 || PPC_MPC52xx
-config PPC_OCP
- bool
- depends on IBM_OCP || XILINX_OCP
- default y
-
choice
prompt "Early debugging (dangerous)"
bool
diff --git a/trunk/arch/powerpc/Makefile b/trunk/arch/powerpc/Makefile
index 829e017b8a54..6ec84d37a337 100644
--- a/trunk/arch/powerpc/Makefile
+++ b/trunk/arch/powerpc/Makefile
@@ -129,13 +129,8 @@ core-y += arch/powerpc/kernel/ \
arch/powerpc/lib/ \
arch/powerpc/sysdev/ \
arch/powerpc/platforms/
-core-$(CONFIG_PPC32) += arch/ppc/kernel/
-core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/
+core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/
core-$(CONFIG_XMON) += arch/powerpc/xmon/
-core-$(CONFIG_APUS) += arch/ppc/amiga/
-drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/
-drivers-$(CONFIG_4xx) += arch/ppc/4xx_io/
-drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/
drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
diff --git a/trunk/arch/powerpc/configs/cell_defconfig b/trunk/arch/powerpc/configs/cell_defconfig
index 3c2acab63736..fe22e54ab2b0 100644
--- a/trunk/arch/powerpc/configs/cell_defconfig
+++ b/trunk/arch/powerpc/configs/cell_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc6
-# Wed Mar 15 16:19:48 2006
+# Linux kernel version: 2.6.16
+# Thu Mar 23 20:48:09 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@@ -30,6 +30,7 @@ CONFIG_POWER4=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
@@ -51,7 +52,8 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -85,7 +87,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
@@ -130,7 +132,8 @@ CONFIG_CELL_IIC=y
#
# Cell Broadband Engine options
#
-CONFIG_SPU_FS=y
+CONFIG_SPU_FS=m
+CONFIG_SPUFS_MMAP=y
#
# Kernel options
@@ -144,7 +147,7 @@ CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_IOMMU_VMERGE is not set
CONFIG_KEXEC=y
@@ -155,13 +158,16 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
+# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
@@ -232,6 +238,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -244,25 +251,7 @@ CONFIG_NETFILTER=y
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
@@ -278,51 +267,13 @@ CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_POLICY=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
@@ -355,7 +306,6 @@ CONFIG_IP_NF_ARP_MANGLE=m
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -408,7 +358,7 @@ CONFIG_FW_LOADER=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -484,7 +434,23 @@ CONFIG_IDEDMA_AUTO=y
#
# Multi-device support (RAID and LVM)
#
-# CONFIG_MD is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_EMC is not set
#
# Fusion MPT device support
@@ -548,7 +514,7 @@ CONFIG_MII=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
+CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
@@ -560,7 +526,7 @@ CONFIG_SKGE=m
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-CONFIG_SPIDER_NET=y
+CONFIG_SPIDER_NET=m
# CONFIG_MV643XX_ETH is not set
#
@@ -678,6 +644,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_RTAS=y
#
# IPMI
@@ -694,14 +662,13 @@ CONFIG_WATCHDOG=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_WATCHDOG_RTAS is not set
+CONFIG_WATCHDOG_RTAS=y
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
-# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
@@ -833,6 +800,7 @@ CONFIG_DUMMY_CONSOLE=y
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
@@ -852,7 +820,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y
#
# InfiniBand support
#
-# CONFIG_INFINIBAND is not set
+CONFIG_INFINIBAND=y
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
@@ -1037,10 +1012,6 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
#
# Instrumentation Support
@@ -1058,7 +1029,7 @@ CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
diff --git a/trunk/arch/powerpc/configs/mpc8540_ads_defconfig b/trunk/arch/powerpc/configs/mpc8540_ads_defconfig
index 2a8290ee15c6..7f0780f1aa39 100644
--- a/trunk/arch/powerpc/configs/mpc8540_ads_defconfig
+++ b/trunk/arch/powerpc/configs/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version:
-# Sat Jan 14 15:57:54 2006
+# Linux kernel version: 2.6.16
+# Mon Mar 27 23:37:36 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
@@ -18,6 +19,7 @@ CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_DEFAULT_UIMAGE=y
#
# Processor support
@@ -42,7 +44,6 @@ CONFIG_SPE=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -58,6 +59,7 @@ CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
@@ -72,10 +74,6 @@ CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -90,6 +88,8 @@ CONFIG_BASE_SMALL=0
# Block layer
#
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
@@ -183,6 +183,7 @@ CONFIG_NET=y
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -220,6 +221,11 @@ CONFIG_TCP_CONG_BIC=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -229,11 +235,6 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -486,6 +487,12 @@ CONFIG_GEN_RTC=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
@@ -496,16 +503,13 @@ CONFIG_GEN_RTC=y
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
-#
-# Multimedia Capabilities Port drivers
-#
-
#
# Multimedia devices
#
@@ -531,6 +535,7 @@ CONFIG_HWMON=y
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -551,7 +556,7 @@ CONFIG_HWMON=y
#
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
@@ -603,7 +608,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
@@ -658,6 +662,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -695,6 +700,8 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
diff --git a/trunk/arch/powerpc/kernel/Makefile b/trunk/arch/powerpc/kernel/Makefile
index 80e9fe2632b8..0cc0995b81b0 100644
--- a/trunk/arch/powerpc/kernel/Makefile
+++ b/trunk/arch/powerpc/kernel/Makefile
@@ -12,12 +12,12 @@ endif
obj-y := semaphore.o cputable.o ptrace.o syscalls.o \
irq.o align.o signal_32.o pmc.o vdso.o \
- init_task.o process.o systbl.o
+ init_task.o process.o systbl.o idle.o
obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
signal_64.o ptrace32.o \
paca.o cpu_setup_power4.o \
- firmware.o sysfs.o idle_64.o
+ firmware.o sysfs.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_POWER4) += idle_power4.o
@@ -34,6 +34,11 @@ obj-$(CONFIG_IBMEBUS) += ibmebus.o
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
+obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
+obj-$(CONFIG_TAU) += tau_6xx.o
+obj32-$(CONFIG_SOFTWARE_SUSPEND) += swsusp_32.o
+obj32-$(CONFIG_MODULES) += module_32.o
+obj-$(CONFIG_E500) += perfmon_fsl_booke.o
ifeq ($(CONFIG_PPC_MERGE),y)
@@ -51,7 +56,6 @@ obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o
obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
-obj-$(CONFIG_6xx) += idle_6xx.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o
@@ -77,6 +81,7 @@ smpobj-$(CONFIG_SMP) += smp.o
endif
+obj-$(CONFIG_PPC32) += $(obj32-y)
obj-$(CONFIG_PPC64) += $(obj64-y)
extra-$(CONFIG_PPC_FPU) += fpu.o
diff --git a/trunk/arch/powerpc/kernel/asm-offsets.c b/trunk/arch/powerpc/kernel/asm-offsets.c
index 882889b15926..54b48f330051 100644
--- a/trunk/arch/powerpc/kernel/asm-offsets.c
+++ b/trunk/arch/powerpc/kernel/asm-offsets.c
@@ -105,8 +105,6 @@ int main(void)
DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size));
DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size));
DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page));
- DEFINE(PLATFORM_LPAR, PLATFORM_LPAR);
-
/* paca */
DEFINE(PACA_SIZE, sizeof(struct paca_struct));
DEFINE(PACAPACAINDEX, offsetof(struct paca_struct, paca_index));
diff --git a/trunk/arch/ppc/kernel/cpu_setup_6xx.S b/trunk/arch/powerpc/kernel/cpu_setup_6xx.S
similarity index 100%
rename from trunk/arch/ppc/kernel/cpu_setup_6xx.S
rename to trunk/arch/powerpc/kernel/cpu_setup_6xx.S
diff --git a/trunk/arch/powerpc/kernel/crash_dump.c b/trunk/arch/powerpc/kernel/crash_dump.c
index 211d72653ea6..764d07329716 100644
--- a/trunk/arch/powerpc/kernel/crash_dump.c
+++ b/trunk/arch/powerpc/kernel/crash_dump.c
@@ -61,7 +61,7 @@ static int __init parse_elfcorehdr(char *p)
if (p)
elfcorehdr_addr = memparse(p, &p);
- return 0;
+ return 1;
}
__setup("elfcorehdr=", parse_elfcorehdr);
#endif
@@ -71,7 +71,7 @@ static int __init parse_savemaxmem(char *p)
if (p)
saved_max_pfn = (memparse(p, &p) >> PAGE_SHIFT) - 1;
- return 0;
+ return 1;
}
__setup("savemaxmem=", parse_savemaxmem);
diff --git a/trunk/arch/powerpc/kernel/entry_32.S b/trunk/arch/powerpc/kernel/entry_32.S
index 4827ca1ec89b..b3a979467225 100644
--- a/trunk/arch/powerpc/kernel/entry_32.S
+++ b/trunk/arch/powerpc/kernel/entry_32.S
@@ -135,10 +135,10 @@ transfer_to_handler:
mfspr r11,SPRN_HID0
mtcr r11
BEGIN_FTR_SECTION
- bt- 8,power_save_6xx_restore /* Check DOZE */
+ bt- 8,4f /* Check DOZE */
END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
BEGIN_FTR_SECTION
- bt- 9,power_save_6xx_restore /* Check NAP */
+ bt- 9,4f /* Check NAP */
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
#endif /* CONFIG_6xx */
.globl transfer_to_handler_cont
@@ -157,6 +157,10 @@ transfer_to_handler_cont:
SYNC
RFI /* jump to handler, enable MMU */
+#ifdef CONFIG_6xx
+4: b power_save_6xx_restore
+#endif
+
/*
* On kernel stack overflow, load up an initial stack pointer
* and call StackOverflow(regs), which should not return.
diff --git a/trunk/arch/powerpc/kernel/entry_64.S b/trunk/arch/powerpc/kernel/entry_64.S
index 1060155d84c3..19ad5c6b1818 100644
--- a/trunk/arch/powerpc/kernel/entry_64.S
+++ b/trunk/arch/powerpc/kernel/entry_64.S
@@ -617,6 +617,12 @@ _GLOBAL(enter_rtas)
mfsrr1 r10
std r10,_SRR1(r1)
+ /* Temporary workaround to clear CR until RTAS can be modified to
+ * ignore all bits.
+ */
+ li r0,0
+ mtcr r0
+
/* There is no way it is acceptable to get here with interrupts enabled,
* check it with the asm equivalent of WARN_ON
*/
diff --git a/trunk/arch/powerpc/kernel/firmware.c b/trunk/arch/powerpc/kernel/firmware.c
index 4d37a3cb80f6..0bfe9061720a 100644
--- a/trunk/arch/powerpc/kernel/firmware.c
+++ b/trunk/arch/powerpc/kernel/firmware.c
@@ -14,7 +14,9 @@
*/
#include
+#include
#include
-unsigned long ppc64_firmware_features;
+unsigned long powerpc_firmware_features;
+EXPORT_SYMBOL_GPL(powerpc_firmware_features);
diff --git a/trunk/arch/powerpc/kernel/head_64.S b/trunk/arch/powerpc/kernel/head_64.S
index 35084f3a841b..a5ae04a57c78 100644
--- a/trunk/arch/powerpc/kernel/head_64.S
+++ b/trunk/arch/powerpc/kernel/head_64.S
@@ -1544,7 +1544,11 @@ _STATIC(__boot_from_prom)
mr r28,r6
mr r27,r7
- /* Align the stack to 16-byte boundary for broken yaboot */
+ /*
+ * Align the stack to 16-byte boundary
+ * Depending on the size and layout of the ELF sections in the initial
+ * boot binary, the stack pointer will be unalignet on PowerMac
+ */
rldicr r1,r1,0,59
/* Make sure we are running in 64 bits mode */
@@ -1847,21 +1851,6 @@ _STATIC(start_here_multiplatform)
bl .__save_cpu_setup
sync
- /* Setup a valid physical PACA pointer in SPRG3 for early_setup
- * note that boot_cpuid can always be 0 nowadays since there is
- * nowhere it can be initialized differently before we reach this
- * code
- */
- LOAD_REG_IMMEDIATE(r27, boot_cpuid)
- add r27,r27,r26
- lwz r27,0(r27)
-
- LOAD_REG_IMMEDIATE(r24, paca) /* Get base vaddr of paca array */
- mulli r13,r27,PACA_SIZE /* Calculate vaddr of right paca */
- add r13,r13,r24 /* for this processor. */
- add r13,r13,r26 /* convert to physical addr */
- mtspr SPRN_SPRG3,r13
-
/* Do very early kernel initializations, including initial hash table,
* stab and slb setup before we turn on relocation. */
@@ -1930,6 +1919,17 @@ _STATIC(start_here_common)
/* Not reached */
BUG_OPCODE
+/* Put the paca pointer into r13 and SPRG3 */
+_GLOBAL(setup_boot_paca)
+ LOAD_REG_IMMEDIATE(r3, boot_cpuid)
+ lwz r3,0(r3)
+ LOAD_REG_IMMEDIATE(r4, paca) /* Get base vaddr of paca array */
+ mulli r3,r3,PACA_SIZE /* Calculate vaddr of right paca */
+ add r13,r3,r4 /* for this processor. */
+ mtspr SPRN_SPRG3,r13
+
+ blr
+
/*
* We put a few things here that have to be page-aligned.
* This stuff goes at the beginning of the bss, which is page-aligned.
diff --git a/trunk/arch/powerpc/kernel/idle_64.c b/trunk/arch/powerpc/kernel/idle.c
similarity index 65%
rename from trunk/arch/powerpc/kernel/idle_64.c
rename to trunk/arch/powerpc/kernel/idle.c
index b879d3057ef8..e9f321d74d85 100644
--- a/trunk/arch/powerpc/kernel/idle_64.c
+++ b/trunk/arch/powerpc/kernel/idle.c
@@ -2,13 +2,17 @@
* Idle daemon for PowerPC. Idle daemon will handle any action
* that needs to be taken when the system becomes idle.
*
- * Originally Written by Cort Dougan (cort@cs.nmt.edu)
+ * Originally written by Cort Dougan (cort@cs.nmt.edu).
+ * Subsequent 32-bit hacking by Tom Rini, Armin Kuster,
+ * Paul Mackerras and others.
*
* iSeries supported added by Mike Corrigan
*
* Additional shared processor, SMT, and firmware support
* Copyright (c) 2003 Dave Engebretsen
*
+ * 32-bit and 64-bit versions merged by Paul Mackerras
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
@@ -29,18 +33,43 @@
#include
#include
-extern void power4_idle(void);
+#ifdef CONFIG_HOTPLUG_CPU
+#define cpu_should_die() (cpu_is_offline(smp_processor_id()) && \
+ system_state == SYSTEM_RUNNING)
+#else
+#define cpu_should_die() 0
+#endif
-void default_idle(void)
+/*
+ * The body of the idle task.
+ */
+void cpu_idle(void)
{
- unsigned int cpu = smp_processor_id();
- set_thread_flag(TIF_POLLING_NRFLAG);
+ if (ppc_md.idle_loop)
+ ppc_md.idle_loop(); /* doesn't return */
+ set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
- if (!need_resched()) {
- while (!need_resched() && !cpu_is_offline(cpu)) {
- ppc64_runlatch_off();
+ ppc64_runlatch_off();
+ while (!need_resched() && !cpu_should_die()) {
+ if (ppc_md.power_save) {
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ /*
+ * smp_mb is so clearing of TIF_POLLING_NRFLAG
+ * is ordered w.r.t. need_resched() test.
+ */
+ smp_mb();
+ local_irq_disable();
+
+ /* check again after disabling irqs */
+ if (!need_resched() && !cpu_should_die())
+ ppc_md.power_save();
+
+ local_irq_enable();
+ set_thread_flag(TIF_POLLING_NRFLAG);
+
+ } else {
/*
* Go into low thread priority and possibly
* low power mode.
@@ -48,46 +77,18 @@ void default_idle(void)
HMT_low();
HMT_very_low();
}
-
- HMT_medium();
}
+ HMT_medium();
ppc64_runlatch_on();
+ if (cpu_should_die())
+ cpu_die();
preempt_enable_no_resched();
schedule();
preempt_disable();
- if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
- cpu_die();
}
}
-void native_idle(void)
-{
- while (1) {
- ppc64_runlatch_off();
-
- if (!need_resched())
- power4_idle();
-
- if (need_resched()) {
- ppc64_runlatch_on();
- preempt_enable_no_resched();
- schedule();
- preempt_disable();
- }
-
- if (cpu_is_offline(smp_processor_id()) &&
- system_state == SYSTEM_RUNNING)
- cpu_die();
- }
-}
-
-void cpu_idle(void)
-{
- BUG_ON(NULL == ppc_md.idle_loop);
- ppc_md.idle_loop();
-}
-
int powersave_nap;
#ifdef CONFIG_SYSCTL
diff --git a/trunk/arch/powerpc/kernel/idle_6xx.S b/trunk/arch/powerpc/kernel/idle_6xx.S
index 444fdcc769f1..12a4efbaa08f 100644
--- a/trunk/arch/powerpc/kernel/idle_6xx.S
+++ b/trunk/arch/powerpc/kernel/idle_6xx.S
@@ -87,19 +87,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
cmpwi 0,r3,0
beqlr
- /* Clear MSR:EE */
- mfmsr r7
- rlwinm r0,r7,0,17,15
- mtmsr r0
-
- /* Check current_thread_info()->flags */
- rlwinm r4,r1,0,0,18
- lwz r4,TI_FLAGS(r4)
- andi. r0,r4,_TIF_NEED_RESCHED
- beq 1f
- mtmsr r7 /* out of line this ? */
- blr
-1:
/* Some pre-nap cleanups needed on some CPUs */
andis. r0,r3,HID0_NAP@h
beq 2f
@@ -157,7 +144,8 @@ BEGIN_FTR_SECTION
DSSALL
sync
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
- ori r7,r7,MSR_EE /* Could be ommited (already set) */
+ mfmsr r7
+ ori r7,r7,MSR_EE
oris r7,r7,MSR_POW@h
sync
isync
@@ -220,8 +208,6 @@ _GLOBAL(nap_save_msscr0)
_GLOBAL(nap_save_hid1)
.space 4*NR_CPUS
-_GLOBAL(powersave_nap)
- .long 0
_GLOBAL(powersave_lowspeed)
.long 0
diff --git a/trunk/arch/powerpc/kernel/idle_power4.S b/trunk/arch/powerpc/kernel/idle_power4.S
index c16b4afab582..6dad1c02496e 100644
--- a/trunk/arch/powerpc/kernel/idle_power4.S
+++ b/trunk/arch/powerpc/kernel/idle_power4.S
@@ -1,11 +1,5 @@
/*
- * This file contains the power_save function for 6xx & 7xxx CPUs
- * rewritten in assembler
- *
- * Warning ! This code assumes that if your machine has a 750fx
- * it will have PLL 1 set to low speed mode (used during NAP/DOZE).
- * if this is not the case some additional changes will have to
- * be done to check a runtime var (a bit like powersave-nap)
+ * This file contains the power_save function for 970-family CPUs.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -26,49 +20,23 @@
.text
-/*
- * Here is the power_save_6xx function. This could eventually be
- * split into several functions & changing the function pointer
- * depending on the various features.
- */
_GLOBAL(power4_idle)
BEGIN_FTR_SECTION
blr
END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
- /* We must dynamically check for the NAP feature as it
- * can be cleared by CPU init after the fixups are done
- */
- LOAD_REG_ADDRBASE(r3,cur_cpu_spec)
- ld r4,ADDROFF(cur_cpu_spec)(r3)
- ld r4,CPU_SPEC_FEATURES(r4)
- andi. r0,r4,CPU_FTR_CAN_NAP
- beqlr
/* Now check if user or arch enabled NAP mode */
LOAD_REG_ADDRBASE(r3,powersave_nap)
lwz r4,ADDROFF(powersave_nap)(r3)
cmpwi 0,r4,0
beqlr
- /* Clear MSR:EE */
- mfmsr r7
- li r4,0
- ori r4,r4,MSR_EE
- andc r0,r7,r4
- mtmsrd r0
-
- /* Check current_thread_info()->flags */
- clrrdi r4,r1,THREAD_SHIFT
- ld r4,TI_FLAGS(r4)
- andi. r0,r4,_TIF_NEED_RESCHED
- beq 1f
- mtmsrd r7 /* out of line this ? */
- blr
-1:
/* Go to NAP now */
BEGIN_FTR_SECTION
DSSALL
sync
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+ mfmsr r7
+ ori r7,r7,MSR_EE
oris r7,r7,MSR_POW@h
sync
isync
diff --git a/trunk/arch/powerpc/kernel/irq.c b/trunk/arch/powerpc/kernel/irq.c
index 771a59cbd213..bb5c9501234c 100644
--- a/trunk/arch/powerpc/kernel/irq.c
+++ b/trunk/arch/powerpc/kernel/irq.c
@@ -379,7 +379,7 @@ void irq_ctx_init(void)
struct thread_info *tp;
int i;
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
tp = softirq_ctx[i];
tp->cpu = i;
diff --git a/trunk/arch/ppc/kernel/l2cr.S b/trunk/arch/powerpc/kernel/l2cr_6xx.S
similarity index 100%
rename from trunk/arch/ppc/kernel/l2cr.S
rename to trunk/arch/powerpc/kernel/l2cr_6xx.S
diff --git a/trunk/arch/powerpc/kernel/legacy_serial.c b/trunk/arch/powerpc/kernel/legacy_serial.c
index c7a799a09516..6e67b5b49ba1 100644
--- a/trunk/arch/powerpc/kernel/legacy_serial.c
+++ b/trunk/arch/powerpc/kernel/legacy_serial.c
@@ -37,7 +37,7 @@ static int legacy_serial_console = -1;
static int __init add_legacy_port(struct device_node *np, int want_index,
int iotype, phys_addr_t base,
phys_addr_t taddr, unsigned long irq,
- unsigned int flags)
+ upf_t flags)
{
u32 *clk, *spd, clock = BASE_BAUD * 16;
int index;
@@ -113,7 +113,7 @@ static int __init add_legacy_soc_port(struct device_node *np,
{
phys_addr_t addr;
u32 *addrp;
- unsigned int flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
/* We only support ports that have a clock frequency properly
* encoded in the device-tree.
@@ -236,6 +236,23 @@ static int __init add_legacy_pci_port(struct device_node *np,
}
#endif
+static void __init setup_legacy_serial_console(int console)
+{
+ struct legacy_serial_info *info =
+ &legacy_serial_infos[console];
+ void __iomem *addr;
+
+ if (info->taddr == 0)
+ return;
+ addr = ioremap(info->taddr, 0x1000);
+ if (addr == NULL)
+ return;
+ if (info->speed == 0)
+ info->speed = udbg_probe_uart_speed(addr, info->clock);
+ DBG("default console speed = %d\n", info->speed);
+ udbg_init_uart(addr, info->speed, info->clock);
+}
+
/*
* This is called very early, as part of setup_system() or eventually
* setup_arch(), basically before anything else in this file. This function
@@ -318,25 +335,8 @@ void __init find_legacy_serial_ports(void)
#endif
DBG("legacy_serial_console = %d\n", legacy_serial_console);
-
- /* udbg is 64 bits only for now, that will change soon though ... */
- while (legacy_serial_console >= 0) {
- struct legacy_serial_info *info =
- &legacy_serial_infos[legacy_serial_console];
- void __iomem *addr;
-
- if (info->taddr == 0)
- break;
- addr = ioremap(info->taddr, 0x1000);
- if (addr == NULL)
- break;
- if (info->speed == 0)
- info->speed = udbg_probe_uart_speed(addr, info->clock);
- DBG("default console speed = %d\n", info->speed);
- udbg_init_uart(addr, info->speed, info->clock);
- break;
- }
-
+ if (legacy_serial_console >= 0)
+ setup_legacy_serial_console(legacy_serial_console);
DBG(" <- find_legacy_serial_port()\n");
}
diff --git a/trunk/arch/powerpc/kernel/lparcfg.c b/trunk/arch/powerpc/kernel/lparcfg.c
index e789fef4eb8a..1b73508ecb2b 100644
--- a/trunk/arch/powerpc/kernel/lparcfg.c
+++ b/trunk/arch/powerpc/kernel/lparcfg.c
@@ -56,7 +56,7 @@ static unsigned long get_purr(void)
unsigned long sum_purr = 0;
int cpu;
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
sum_purr += lppaca[cpu].emulated_time_base;
#ifdef PURR_DEBUG
@@ -222,7 +222,7 @@ static unsigned long get_purr(void)
int cpu;
struct cpu_usage *cu;
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
cu = &per_cpu(cpu_usage_array, cpu);
sum_purr += cu->current_tb;
}
diff --git a/trunk/arch/ppc/kernel/module.c b/trunk/arch/powerpc/kernel/module_32.c
similarity index 100%
rename from trunk/arch/ppc/kernel/module.c
rename to trunk/arch/powerpc/kernel/module_32.c
diff --git a/trunk/arch/powerpc/kernel/nvram_64.c b/trunk/arch/powerpc/kernel/nvram_64.c
index fd7db8d542db..ada50aa5b600 100644
--- a/trunk/arch/powerpc/kernel/nvram_64.c
+++ b/trunk/arch/powerpc/kernel/nvram_64.c
@@ -160,7 +160,7 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file,
case IOC_NVRAM_GET_OFFSET: {
int part, offset;
- if (_machine != PLATFORM_POWERMAC)
+ if (!machine_is(powermac))
return -EINVAL;
if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0)
return -EFAULT;
@@ -174,8 +174,9 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file,
return 0;
}
#endif /* CONFIG_PPC_PMAC */
+ default:
+ return -EINVAL;
}
- return -EINVAL;
}
struct file_operations nvram_fops = {
@@ -443,7 +444,7 @@ static int nvram_setup_partition(void)
* in our nvram, as Apple defined partitions use pretty much
* all of the space
*/
- if (_machine == PLATFORM_POWERMAC)
+ if (machine_is(powermac))
return -ENOSPC;
/* see if we have an OS partition that meets our needs.
diff --git a/trunk/arch/powerpc/kernel/paca.c b/trunk/arch/powerpc/kernel/paca.c
index 5d1b708086bd..f505a8827e3e 100644
--- a/trunk/arch/powerpc/kernel/paca.c
+++ b/trunk/arch/powerpc/kernel/paca.c
@@ -56,14 +56,11 @@ struct lppaca lppaca[] = {
* processors. The processor VPD array needs one entry per physical
* processor (not thread).
*/
-#define PACA_INIT_COMMON(number, start, asrr, asrv) \
+#define PACA_INIT_COMMON(number) \
.lppaca_ptr = &lppaca[number], \
.lock_token = 0x8000, \
.paca_index = (number), /* Paca Index */ \
.kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \
- .stab_real = (asrr), /* Real pointer to segment table */ \
- .stab_addr = (asrv), /* Virt pointer to segment table */ \
- .cpu_start = (start), /* Processor start */ \
.hw_cpu_id = 0xffff,
#ifdef CONFIG_PPC_ISERIES
@@ -72,30 +69,20 @@ struct lppaca lppaca[] = {
#define PACA_INIT(number) \
{ \
- PACA_INIT_COMMON(number, 0, 0, 0) \
- PACA_INIT_ISERIES(number) \
-}
-
-#define BOOTCPU_PACA_INIT(number) \
-{ \
- PACA_INIT_COMMON(number, 1, 0, (u64)&initial_stab) \
+ PACA_INIT_COMMON(number) \
PACA_INIT_ISERIES(number) \
}
#else
#define PACA_INIT(number) \
{ \
- PACA_INIT_COMMON(number, 0, 0, 0) \
+ PACA_INIT_COMMON(number) \
}
-#define BOOTCPU_PACA_INIT(number) \
-{ \
- PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, (u64)&initial_stab) \
-}
#endif
struct paca_struct paca[] = {
- BOOTCPU_PACA_INIT(0),
+ PACA_INIT(0),
#if NR_CPUS > 1
PACA_INIT( 1), PACA_INIT( 2), PACA_INIT( 3),
#if NR_CPUS > 4
diff --git a/trunk/arch/powerpc/kernel/pci_32.c b/trunk/arch/powerpc/kernel/pci_32.c
index 704c846b2b0f..b129d2e4b759 100644
--- a/trunk/arch/powerpc/kernel/pci_32.c
+++ b/trunk/arch/powerpc/kernel/pci_32.c
@@ -787,7 +787,7 @@ pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
* fix has to be done by making the remapping per-host and always
* filling the pci_to_OF map. --BenH
*/
- if (_machine == _MACH_Pmac && busnr >= 0xf0)
+ if (machine_is(powermac) && busnr >= 0xf0)
busnr -= 0xf0;
else
#endif
@@ -1728,7 +1728,7 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
* (bus 0 is HT root), we return the AGP one instead.
*/
#ifdef CONFIG_PPC_PMAC
- if (_machine == _MACH_Pmac && machine_is_compatible("MacRISC4"))
+ if (machine_is(powermac) && machine_is_compatible("MacRISC4"))
if (bus == 0)
bus = 0xf0;
#endif /* CONFIG_PPC_PMAC */
diff --git a/trunk/arch/powerpc/kernel/pci_64.c b/trunk/arch/powerpc/kernel/pci_64.c
index ba92bab7cc2c..4c4449be81ce 100644
--- a/trunk/arch/powerpc/kernel/pci_64.c
+++ b/trunk/arch/powerpc/kernel/pci_64.c
@@ -78,6 +78,7 @@ int global_phb_number; /* Global phb counter */
/* Cached ISA bridge dev. */
struct pci_dev *ppc64_isabridge_dev = NULL;
+EXPORT_SYMBOL_GPL(ppc64_isabridge_dev);
static void fixup_broken_pcnet32(struct pci_dev* dev)
{
diff --git a/trunk/arch/ppc/kernel/perfmon_fsl_booke.c b/trunk/arch/powerpc/kernel/perfmon_fsl_booke.c
similarity index 100%
rename from trunk/arch/ppc/kernel/perfmon_fsl_booke.c
rename to trunk/arch/powerpc/kernel/perfmon_fsl_booke.c
diff --git a/trunk/arch/powerpc/kernel/proc_ppc64.c b/trunk/arch/powerpc/kernel/proc_ppc64.c
index 7ba42a405f41..3c2cf661f6d9 100644
--- a/trunk/arch/powerpc/kernel/proc_ppc64.c
+++ b/trunk/arch/powerpc/kernel/proc_ppc64.c
@@ -23,6 +23,7 @@
#include
#include
+#include
#include
#include
#include
@@ -51,7 +52,7 @@ static int __init proc_ppc64_create(void)
if (!root)
return 1;
- if (!(platform_is_pseries() || _machine == PLATFORM_CELL))
+ if (!machine_is(pseries) && !machine_is(cell))
return 0;
if (!proc_mkdir("rtas", root))
diff --git a/trunk/arch/powerpc/kernel/process.c b/trunk/arch/powerpc/kernel/process.c
index f698aa77127e..2dd47d2dd998 100644
--- a/trunk/arch/powerpc/kernel/process.c
+++ b/trunk/arch/powerpc/kernel/process.c
@@ -45,6 +45,7 @@
#include
#include
#include
+#include
#ifdef CONFIG_PPC64
#include
#endif
@@ -362,7 +363,11 @@ static void show_instructions(struct pt_regs *regs)
if (!(i % 8))
printk("\n");
- if (BAD_PC(pc) || __get_user(instr, (unsigned int *)pc)) {
+ /* We use __get_user here *only* to avoid an OOPS on a
+ * bad address because the pc *should* only be a
+ * kernel address.
+ */
+ if (BAD_PC(pc) || __get_user(instr, (unsigned int __user *)pc)) {
printk("XXXXXXXX ");
} else {
if (regs->nip == pc)
@@ -765,7 +770,7 @@ int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
return error;
}
-static int validate_sp(unsigned long sp, struct task_struct *p,
+int validate_sp(unsigned long sp, struct task_struct *p,
unsigned long nbytes)
{
unsigned long stack_page = (unsigned long)task_stack_page(p);
@@ -803,6 +808,8 @@ static int validate_sp(unsigned long sp, struct task_struct *p,
#define FRAME_MARKER 2
#endif
+EXPORT_SYMBOL(validate_sp);
+
unsigned long get_wchan(struct task_struct *p)
{
unsigned long ip, sp;
@@ -827,7 +834,6 @@ unsigned long get_wchan(struct task_struct *p)
} while (count++ < 16);
return 0;
}
-EXPORT_SYMBOL(get_wchan);
static int kstack_depth_to_print = 64;
diff --git a/trunk/arch/powerpc/kernel/prom.c b/trunk/arch/powerpc/kernel/prom.c
index d63cd562d9d5..4336390bcf34 100644
--- a/trunk/arch/powerpc/kernel/prom.c
+++ b/trunk/arch/powerpc/kernel/prom.c
@@ -383,14 +383,14 @@ static int __devinit finish_node_interrupts(struct device_node *np,
/* Apple uses bits in there in a different way, let's
* only keep the real sense bit on macs
*/
- if (_machine == PLATFORM_POWERMAC)
+ if (machine_is(powermac))
sense &= 0x1;
np->intrs[intrcount].sense = map_mpic_senses[sense];
}
#ifdef CONFIG_PPC64
/* We offset irq numbers for the u3 MPIC by 128 in PowerMac */
- if (_machine == PLATFORM_POWERMAC && ic && ic->parent) {
+ if (machine_is(powermac) && ic && ic->parent) {
char *name = get_property(ic->parent, "name", NULL);
if (name && !strcmp(name, "u3"))
np->intrs[intrcount].line += 128;
@@ -570,6 +570,18 @@ int __init of_scan_flat_dt(int (*it)(unsigned long node,
return rc;
}
+unsigned long __init of_get_flat_dt_root(void)
+{
+ unsigned long p = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+
+ while(*((u32 *)p) == OF_DT_NOP)
+ p += 4;
+ BUG_ON (*((u32 *)p) != OF_DT_BEGIN_NODE);
+ p += 4;
+ return _ALIGN(p + strlen((char *)p) + 1, 4);
+}
+
/**
* This function can be used within scan_flattened_dt callback to get
* access to properties
@@ -612,6 +624,25 @@ void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
} while(1);
}
+int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
+{
+ const char* cp;
+ unsigned long cplen, l;
+
+ cp = of_get_flat_dt_prop(node, "compatible", &cplen);
+ if (cp == NULL)
+ return 0;
+ while (cplen > 0) {
+ if (strncasecmp(cp, compat, strlen(compat)) == 0)
+ return 1;
+ l = strlen(cp) + 1;
+ cp += l;
+ cplen -= l;
+ }
+
+ return 0;
+}
+
static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
unsigned long align)
{
@@ -686,7 +717,7 @@ static unsigned long __init unflatten_dt_node(unsigned long mem,
#ifdef DEBUG
if ((strlen(p) + l + 1) != allocl) {
DBG("%s: p: %d, l: %d, a: %d\n",
- pathp, strlen(p), l, allocl);
+ pathp, (int)strlen(p), l, allocl);
}
#endif
p += strlen(p);
@@ -854,35 +885,73 @@ void __init unflatten_device_tree(void)
DBG(" <- unflatten_device_tree()\n");
}
-
static int __init early_init_dt_scan_cpus(unsigned long node,
- const char *uname, int depth, void *data)
+ const char *uname, int depth,
+ void *data)
{
+ static int logical_cpuid = 0;
+ char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+#ifdef CONFIG_ALTIVEC
u32 *prop;
- unsigned long size;
- char *type = of_get_flat_dt_prop(node, "device_type", &size);
+#endif
+ u32 *intserv;
+ int i, nthreads;
+ unsigned long len;
+ int found = 0;
/* We are scanning "cpu" nodes only */
if (type == NULL || strcmp(type, "cpu") != 0)
return 0;
- boot_cpuid = 0;
- boot_cpuid_phys = 0;
- if (initial_boot_params && initial_boot_params->version >= 2) {
- /* version 2 of the kexec param format adds the phys cpuid
- * of booted proc.
- */
- boot_cpuid_phys = initial_boot_params->boot_cpuid_phys;
+ /* Get physical cpuid */
+ intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
+ if (intserv) {
+ nthreads = len / sizeof(int);
} else {
- /* Check if it's the boot-cpu, set it's hw index now */
- if (of_get_flat_dt_prop(node,
+ intserv = of_get_flat_dt_prop(node, "reg", NULL);
+ nthreads = 1;
+ }
+
+ /*
+ * Now see if any of these threads match our boot cpu.
+ * NOTE: This must match the parsing done in smp_setup_cpu_maps.
+ */
+ for (i = 0; i < nthreads; i++) {
+ /*
+ * version 2 of the kexec param format adds the phys cpuid of
+ * booted proc.
+ */
+ if (initial_boot_params && initial_boot_params->version >= 2) {
+ if (intserv[i] ==
+ initial_boot_params->boot_cpuid_phys) {
+ found = 1;
+ break;
+ }
+ } else {
+ /*
+ * Check if it's the boot-cpu, set it's hw index now,
+ * unfortunately this format did not support booting
+ * off secondary threads.
+ */
+ if (of_get_flat_dt_prop(node,
"linux,boot-cpu", NULL) != NULL) {
- prop = of_get_flat_dt_prop(node, "reg", NULL);
- if (prop != NULL)
- boot_cpuid_phys = *prop;
+ found = 1;
+ break;
+ }
}
+
+#ifdef CONFIG_SMP
+ /* logical cpu id is always 0 on UP kernels */
+ logical_cpuid++;
+#endif
+ }
+
+ if (found) {
+ DBG("boot cpu: logical %d physical %d\n", logical_cpuid,
+ intserv[i]);
+ boot_cpuid = logical_cpuid;
+ set_hard_smp_processor_id(boot_cpuid, intserv[i]);
}
- set_hard_smp_processor_id(0, boot_cpuid_phys);
#ifdef CONFIG_ALTIVEC
/* Check if we have a VMX and eventually update CPU features */
@@ -901,16 +970,10 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_PPC_PSERIES
- /*
- * Check for an SMT capable CPU and set the CPU feature. We do
- * this by looking at the size of the ibm,ppc-interrupt-server#s
- * property
- */
- prop = (u32 *)of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s",
- &size);
- cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
- if (prop && ((size / sizeof(u32)) > 1))
+ if (nthreads > 1)
cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
+ else
+ cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
#endif
return 0;
@@ -919,7 +982,6 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
static int __init early_init_dt_scan_chosen(unsigned long node,
const char *uname, int depth, void *data)
{
- u32 *prop;
unsigned long *lprop;
unsigned long l;
char *p;
@@ -930,14 +992,6 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
(strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
return 0;
- /* get platform type */
- prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL);
- if (prop == NULL)
- return 0;
-#ifdef CONFIG_PPC_MULTIPLATFORM
- _machine = *prop;
-#endif
-
#ifdef CONFIG_PPC64
/* check if iommu is forced on or off */
if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
@@ -964,15 +1018,15 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
* set of RTAS infos now if available
*/
{
- u64 *basep, *entryp;
+ u64 *basep, *entryp, *sizep;
basep = of_get_flat_dt_prop(node, "linux,rtas-base", NULL);
entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL);
- prop = of_get_flat_dt_prop(node, "linux,rtas-size", NULL);
- if (basep && entryp && prop) {
+ sizep = of_get_flat_dt_prop(node, "linux,rtas-size", NULL);
+ if (basep && entryp && sizep) {
rtas.base = *basep;
rtas.entry = *entryp;
- rtas.size = *prop;
+ rtas.size = *sizep;
}
}
#endif /* CONFIG_PPC_RTAS */
@@ -1001,25 +1055,13 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
if (strstr(cmd_line, "mem=")) {
char *p, *q;
- unsigned long maxmem = 0;
for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
q = p + 4;
if (p > cmd_line && p[-1] != ' ')
continue;
- maxmem = simple_strtoul(q, &q, 0);
- if (*q == 'k' || *q == 'K') {
- maxmem <<= 10;
- ++q;
- } else if (*q == 'm' || *q == 'M') {
- maxmem <<= 20;
- ++q;
- } else if (*q == 'g' || *q == 'G') {
- maxmem <<= 30;
- ++q;
- }
+ memory_limit = memparse(q, &q);
}
- memory_limit = maxmem;
}
/* break now */
@@ -1755,7 +1797,7 @@ static int of_finish_dynamic_node(struct device_node *node)
/* We don't support that function on PowerMac, at least
* not yet
*/
- if (_machine == PLATFORM_POWERMAC)
+ if (machine_is(powermac))
return -ENODEV;
/* fix up new node's linux_phandle field */
diff --git a/trunk/arch/powerpc/kernel/prom_init.c b/trunk/arch/powerpc/kernel/prom_init.c
index 813c2cd194c2..d66c5e77fcff 100644
--- a/trunk/arch/powerpc/kernel/prom_init.c
+++ b/trunk/arch/powerpc/kernel/prom_init.c
@@ -180,6 +180,16 @@ static unsigned long __initdata prom_tce_alloc_start;
static unsigned long __initdata prom_tce_alloc_end;
#endif
+/* Platforms codes are now obsolete in the kernel. Now only used within this
+ * file and ultimately gone too. Feel free to change them if you need, they
+ * are not shared with anything outside of this file anymore
+ */
+#define PLATFORM_PSERIES 0x0100
+#define PLATFORM_PSERIES_LPAR 0x0101
+#define PLATFORM_LPAR 0x0001
+#define PLATFORM_POWERMAC 0x0400
+#define PLATFORM_GENERIC 0x0500
+
static int __initdata of_platform;
static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
@@ -397,6 +407,11 @@ static void __init __attribute__((noreturn)) prom_panic(const char *reason)
reason = PTRRELOC(reason);
#endif
prom_print(reason);
+ /* Do not call exit because it clears the screen on pmac
+ * it also causes some sort of double-fault on early pmacs */
+ if (RELOC(of_platform) == PLATFORM_POWERMAC)
+ asm("trap\n");
+
/* ToDo: should put up an SRC here on p/iSeries */
call_prom("exit", 0, 0);
@@ -1487,7 +1502,10 @@ static int __init prom_find_machine_type(void)
int len, i = 0;
#ifdef CONFIG_PPC64
phandle rtas;
+ int x;
#endif
+
+ /* Look for a PowerMac */
len = prom_getprop(_prom->root, "compatible",
compat, sizeof(compat)-1);
if (len > 0) {
@@ -1500,28 +1518,36 @@ static int __init prom_find_machine_type(void)
if (strstr(p, RELOC("Power Macintosh")) ||
strstr(p, RELOC("MacRISC")))
return PLATFORM_POWERMAC;
-#ifdef CONFIG_PPC64
- if (strstr(p, RELOC("Momentum,Maple")))
- return PLATFORM_MAPLE;
- if (strstr(p, RELOC("IBM,CPB")))
- return PLATFORM_CELL;
-#endif
i += sl + 1;
}
}
#ifdef CONFIG_PPC64
+ /* If not a mac, try to figure out if it's an IBM pSeries or any other
+ * PAPR compliant platform. We assume it is if :
+ * - /device_type is "chrp" (please, do NOT use that for future
+ * non-IBM designs !
+ * - it has /rtas
+ */
+ len = prom_getprop(_prom->root, "model",
+ compat, sizeof(compat)-1);
+ if (len <= 0)
+ return PLATFORM_GENERIC;
+ compat[len] = 0;
+ if (strcmp(compat, "chrp"))
+ return PLATFORM_GENERIC;
+
/* Default to pSeries. We need to know if we are running LPAR */
rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
- if (PHANDLE_VALID(rtas)) {
- int x = prom_getproplen(rtas, "ibm,hypertas-functions");
- if (x != PROM_ERROR) {
- prom_printf("Hypertas detected, assuming LPAR !\n");
- return PLATFORM_PSERIES_LPAR;
- }
+ if (!PHANDLE_VALID(rtas))
+ return PLATFORM_GENERIC;
+ x = prom_getproplen(rtas, "ibm,hypertas-functions");
+ if (x != PROM_ERROR) {
+ prom_printf("Hypertas detected, assuming LPAR !\n");
+ return PLATFORM_PSERIES_LPAR;
}
return PLATFORM_PSERIES;
#else
- return PLATFORM_CHRP;
+ return PLATFORM_GENERIC;
#endif
}
@@ -2029,7 +2055,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
{
struct prom_t *_prom;
unsigned long hdr;
- u32 getprop_rval;
unsigned long offset = reloc_offset();
#ifdef CONFIG_PPC32
@@ -2060,6 +2085,12 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
*/
prom_init_stdout();
+ /*
+ * Get default machine type. At this point, we do not differentiate
+ * between pSeries SMP and pSeries LPAR
+ */
+ RELOC(of_platform) = prom_find_machine_type();
+
/* Bail if this is a kdump kernel. */
if (PHYSICAL_START > 0)
prom_panic("Error: You can't boot a kdump kernel from OF!\n");
@@ -2069,15 +2100,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
*/
prom_check_initrd(r3, r4);
- /*
- * Get default machine type. At this point, we do not differentiate
- * between pSeries SMP and pSeries LPAR
- */
- RELOC(of_platform) = prom_find_machine_type();
- getprop_rval = RELOC(of_platform);
- prom_setprop(_prom->chosen, "/chosen", "linux,platform",
- &getprop_rval, sizeof(getprop_rval));
-
#ifdef CONFIG_PPC_PSERIES
/*
* On pSeries, inform the firmware about our capabilities
diff --git a/trunk/arch/powerpc/kernel/rtas-proc.c b/trunk/arch/powerpc/kernel/rtas-proc.c
index 1f03fb28cc0a..456286cf1d14 100644
--- a/trunk/arch/powerpc/kernel/rtas-proc.c
+++ b/trunk/arch/powerpc/kernel/rtas-proc.c
@@ -257,7 +257,7 @@ static int __init proc_rtas_init(void)
{
struct proc_dir_entry *entry;
- if (_machine != PLATFORM_PSERIES && _machine != PLATFORM_PSERIES_LPAR)
+ if (!machine_is(pseries))
return 1;
rtas_node = of_find_node_by_name(NULL, "rtas");
diff --git a/trunk/arch/powerpc/kernel/rtas.c b/trunk/arch/powerpc/kernel/rtas.c
index b5b2add7ad1e..06636c927a7e 100644
--- a/trunk/arch/powerpc/kernel/rtas.c
+++ b/trunk/arch/powerpc/kernel/rtas.c
@@ -25,6 +25,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -32,6 +33,7 @@
#include
#include
#include
+#include
struct rtas_t rtas = {
.lock = SPIN_LOCK_UNLOCKED
@@ -591,7 +593,7 @@ static void rtas_percpu_suspend_me(void *info)
data->waiting = 0;
data->args->args[data->args->nargs] =
rtas_call(ibm_suspend_me_token, 0, 1, NULL);
- for_each_cpu(i)
+ for_each_possible_cpu(i)
plpar_hcall_norets(H_PROD,i);
} else {
data->waiting = -EBUSY;
@@ -624,7 +626,7 @@ static int rtas_ibm_suspend_me(struct rtas_args *args)
/* Prod each CPU. This won't hurt, and will wake
* anyone we successfully put to sleep with H_Join
*/
- for_each_cpu(i)
+ for_each_possible_cpu(i)
plpar_hcall_norets(H_PROD, i);
return data.waiting;
@@ -767,7 +769,7 @@ void __init rtas_initialize(void)
* the stop-self token if any
*/
#ifdef CONFIG_PPC64
- if (_machine == PLATFORM_PSERIES_LPAR) {
+ if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) {
rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
ibm_suspend_me_token = rtas_token("ibm,suspend-me");
}
diff --git a/trunk/arch/powerpc/kernel/setup-common.c b/trunk/arch/powerpc/kernel/setup-common.c
index c1d62bf11f29..c607f3b9ca17 100644
--- a/trunk/arch/powerpc/kernel/setup-common.c
+++ b/trunk/arch/powerpc/kernel/setup-common.c
@@ -9,6 +9,9 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+
+#undef DEBUG
+
#include
#include
#include
@@ -41,6 +44,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -56,8 +60,6 @@
#include "setup.h"
-#undef DEBUG
-
#ifdef DEBUG
#include
#define DBG(fmt...) udbg_printf(fmt)
@@ -65,10 +67,12 @@
#define DBG(fmt...)
#endif
-#ifdef CONFIG_PPC_MULTIPLATFORM
-int _machine = 0;
-EXPORT_SYMBOL(_machine);
-#endif
+/* The main machine-dep calls structure
+ */
+struct machdep_calls ppc_md;
+EXPORT_SYMBOL(ppc_md);
+struct machdep_calls *machine_id;
+EXPORT_SYMBOL(machine_id);
unsigned long klimit = (unsigned long) _end;
@@ -168,7 +172,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
#endif /* CONFIG_SMP && CONFIG_PPC32 */
seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
-
+ if (ppc_md.name)
+ seq_printf(m, "platform\t: %s\n", ppc_md.name);
if (ppc_md.show_cpuinfo != NULL)
ppc_md.show_cpuinfo(m);
@@ -352,12 +357,13 @@ void __init check_for_initrd(void)
* must be called before using this.
*
* While we're here, we may as well set the "physical" cpu ids in the paca.
+ *
+ * NOTE: This must match the parsing done in early_init_dt_scan_cpus.
*/
void __init smp_setup_cpu_maps(void)
{
struct device_node *dn = NULL;
int cpu = 0;
- int swap_cpuid = 0;
while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
int *intserv;
@@ -376,30 +382,17 @@ void __init smp_setup_cpu_maps(void)
for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
cpu_set(cpu, cpu_present_map);
set_hard_smp_processor_id(cpu, intserv[j]);
-
- if (intserv[j] == boot_cpuid_phys)
- swap_cpuid = cpu;
cpu_set(cpu, cpu_possible_map);
cpu++;
}
}
- /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
- * boot cpu is logical 0.
- */
- if (boot_cpuid_phys != get_hard_smp_processor_id(0)) {
- u32 tmp;
- tmp = get_hard_smp_processor_id(0);
- set_hard_smp_processor_id(0, boot_cpuid_phys);
- set_hard_smp_processor_id(swap_cpuid, tmp);
- }
-
#ifdef CONFIG_PPC64
/*
* On pSeries LPAR, we need to know how many cpus
* could possibly be added to this partition.
*/
- if (_machine == PLATFORM_PSERIES_LPAR &&
+ if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR) &&
(dn = of_find_node_by_path("/rtas"))) {
int num_addr_cell, num_size_cell, maxcpus;
unsigned int *ireg;
@@ -438,7 +431,7 @@ void __init smp_setup_cpu_maps(void)
/*
* Do the sibling map; assume only two threads per processor.
*/
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
cpu_set(cpu, cpu_sibling_map[cpu]);
if (cpu_has_feature(CPU_FTR_SMT))
cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
@@ -468,3 +461,34 @@ static int __init early_xmon(char *p)
}
early_param("xmon", early_xmon);
#endif
+
+void probe_machine(void)
+{
+ extern struct machdep_calls __machine_desc_start;
+ extern struct machdep_calls __machine_desc_end;
+
+ /*
+ * Iterate all ppc_md structures until we find the proper
+ * one for the current machine type
+ */
+ DBG("Probing machine type ...\n");
+
+ for (machine_id = &__machine_desc_start;
+ machine_id < &__machine_desc_end;
+ machine_id++) {
+ DBG(" %s ...", machine_id->name);
+ memcpy(&ppc_md, machine_id, sizeof(struct machdep_calls));
+ if (ppc_md.probe()) {
+ DBG(" match !\n");
+ break;
+ }
+ DBG("\n");
+ }
+ /* What can we do if we didn't find ? */
+ if (machine_id >= &__machine_desc_end) {
+ DBG("No suitable machine found !\n");
+ for (;;);
+ }
+
+ printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
+}
diff --git a/trunk/arch/powerpc/kernel/setup_32.c b/trunk/arch/powerpc/kernel/setup_32.c
index dc2770df25b3..a72bf5dceeee 100644
--- a/trunk/arch/powerpc/kernel/setup_32.c
+++ b/trunk/arch/powerpc/kernel/setup_32.c
@@ -53,9 +53,6 @@
extern void platform_init(void);
extern void bootx_init(unsigned long r4, unsigned long phys);
-extern void ppc6xx_idle(void);
-extern void power4_idle(void);
-
boot_infos_t *boot_infos;
struct ide_machdep_calls ppc_ide_md;
@@ -70,10 +67,6 @@ unsigned int DMA_MODE_WRITE;
int have_of = 1;
#ifdef CONFIG_PPC_MULTIPLATFORM
-extern void prep_init(void);
-extern void pmac_init(void);
-extern void chrp_init(void);
-
dev_t boot_dev;
#endif /* CONFIG_PPC_MULTIPLATFORM */
@@ -85,9 +78,6 @@ unsigned long SYSRQ_KEY = 0x54;
unsigned long vgacon_remap_base;
#endif
-struct machdep_calls ppc_md;
-EXPORT_SYMBOL(ppc_md);
-
/*
* These are used in binfmt_elf.c to put aux entries on the stack
* for each elf executable being started.
@@ -111,7 +101,7 @@ unsigned long __init early_init(unsigned long dt_ptr)
/* First zero the BSS -- use memset_io, some platforms don't have
* caches on yet */
- memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start);
+ memset_io((void __iomem *)PTRRELOC(&__bss_start), 0, _end - __bss_start);
/*
* Identify the CPU type and fix up code sections
@@ -123,48 +113,6 @@ unsigned long __init early_init(unsigned long dt_ptr)
return KERNELBASE + offset;
}
-#ifdef CONFIG_PPC_MULTIPLATFORM
-/*
- * The PPC_MULTIPLATFORM version of platform_init...
- */
-void __init platform_init(void)
-{
- /* if we didn't get any bootinfo telling us what we are... */
- if (_machine == 0) {
- /* prep boot loader tells us if we're prep or not */
- if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
- _machine = _MACH_prep;
- }
-
-#ifdef CONFIG_PPC_PREP
- /* not much more to do here, if prep */
- if (_machine == _MACH_prep) {
- prep_init();
- return;
- }
-#endif
-
-#ifdef CONFIG_ADB
- if (strstr(cmd_line, "adb_sync")) {
- extern int __adb_probe_sync;
- __adb_probe_sync = 1;
- }
-#endif /* CONFIG_ADB */
-
- switch (_machine) {
-#ifdef CONFIG_PPC_PMAC
- case _MACH_Pmac:
- pmac_init();
- break;
-#endif
-#ifdef CONFIG_PPC_CHRP
- case _MACH_chrp:
- chrp_init();
- break;
-#endif
- }
-}
-#endif
/*
* Find out what kind of machine we're on and save any data we need
@@ -190,11 +138,17 @@ void __init machine_init(unsigned long dt_ptr, unsigned long phys)
strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
#endif /* CONFIG_CMDLINE */
- /* Base init based on machine type */
+#ifdef CONFIG_PPC_MULTIPLATFORM
+ probe_machine();
+#else
+ /* Base init based on machine type. Obsoloete, please kill ! */
platform_init();
+#endif
#ifdef CONFIG_6xx
- ppc_md.power_save = ppc6xx_idle;
+ if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
+ cpu_has_feature(CPU_FTR_CAN_NAP))
+ ppc_md.power_save = ppc6xx_idle;
#endif
if (ppc_md.progress)
@@ -272,7 +226,7 @@ int __init ppc_init(void)
if ( ppc_md.progress ) ppc_md.progress(" ", 0xffff);
/* register CPU devices */
- for_each_cpu(i)
+ for_each_possible_cpu(i)
register_cpu(&cpu_devices[i], i, NULL);
/* call platform init */
@@ -352,12 +306,6 @@ void __init setup_arch(char **cmdline_p)
do_init_bootmem();
if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
-#ifdef CONFIG_PPC_OCP
- /* Initialize OCP device list */
- ocp_early_init();
- if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab);
-#endif
-
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
@@ -366,7 +314,4 @@ void __init setup_arch(char **cmdline_p)
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
paging_init();
-
- /* this is for modules since _machine can be a define -- Cort */
- ppc_md.ppc_machine = _machine;
}
diff --git a/trunk/arch/powerpc/kernel/setup_64.c b/trunk/arch/powerpc/kernel/setup_64.c
index e20c1fae3423..59aa92cd6fa4 100644
--- a/trunk/arch/powerpc/kernel/setup_64.c
+++ b/trunk/arch/powerpc/kernel/setup_64.c
@@ -73,7 +73,6 @@
int have_of = 1;
int boot_cpuid = 0;
-int boot_cpuid_phys = 0;
dev_t boot_dev;
u64 ppc64_pft_size;
@@ -96,11 +95,6 @@ int dcache_bsize;
int icache_bsize;
int ucache_bsize;
-/* The main machine-dep calls structure
- */
-struct machdep_calls ppc_md;
-EXPORT_SYMBOL(ppc_md);
-
#ifdef CONFIG_MAGIC_SYSRQ
unsigned long SYSRQ_KEY;
#endif /* CONFIG_MAGIC_SYSRQ */
@@ -161,32 +155,6 @@ early_param("smt-enabled", early_smt_enabled);
#define check_smt_enabled()
#endif /* CONFIG_SMP */
-extern struct machdep_calls pSeries_md;
-extern struct machdep_calls pmac_md;
-extern struct machdep_calls maple_md;
-extern struct machdep_calls cell_md;
-extern struct machdep_calls iseries_md;
-
-/* Ultimately, stuff them in an elf section like initcalls... */
-static struct machdep_calls __initdata *machines[] = {
-#ifdef CONFIG_PPC_PSERIES
- &pSeries_md,
-#endif /* CONFIG_PPC_PSERIES */
-#ifdef CONFIG_PPC_PMAC
- &pmac_md,
-#endif /* CONFIG_PPC_PMAC */
-#ifdef CONFIG_PPC_MAPLE
- &maple_md,
-#endif /* CONFIG_PPC_MAPLE */
-#ifdef CONFIG_PPC_CELL
- &cell_md,
-#endif
-#ifdef CONFIG_PPC_ISERIES
- &iseries_md,
-#endif
- NULL
-};
-
/*
* Early initialization entry point. This is called by head.S
* with MMU translation disabled. We rely on the "feature" of
@@ -208,13 +176,10 @@ static struct machdep_calls __initdata *machines[] = {
void __init early_setup(unsigned long dt_ptr)
{
- struct paca_struct *lpaca = get_paca();
- static struct machdep_calls **mach;
-
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
- DBG(" -> early_setup()\n");
+ DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
/*
* Do early initializations using the flattened device
@@ -223,22 +188,16 @@ void __init early_setup(unsigned long dt_ptr)
*/
early_init_devtree(__va(dt_ptr));
- /*
- * Iterate all ppc_md structures until we find the proper
- * one for the current machine type
- */
- DBG("Probing machine type for platform %x...\n", _machine);
+ /* Now we know the logical id of our boot cpu, setup the paca. */
+ setup_boot_paca();
- for (mach = machines; *mach; mach++) {
- if ((*mach)->probe(_machine))
- break;
- }
- /* What can we do if we didn't find ? */
- if (*mach == NULL) {
- DBG("No suitable machine found !\n");
- for (;;);
- }
- ppc_md = **mach;
+ /* Fix up paca fields required for the boot cpu */
+ get_paca()->cpu_start = 1;
+ get_paca()->stab_real = __pa((u64)&initial_stab);
+ get_paca()->stab_addr = (u64)&initial_stab;
+
+ /* Probe the machine type */
+ probe_machine();
#ifdef CONFIG_CRASH_DUMP
kdump_setup();
@@ -260,7 +219,7 @@ void __init early_setup(unsigned long dt_ptr)
if (cpu_has_feature(CPU_FTR_SLB))
slb_initialize();
else
- stab_initialize(lpaca->stab_real);
+ stab_initialize(get_paca()->stab_real);
}
DBG(" <- early_setup()\n");
@@ -340,7 +299,7 @@ static void __init initialize_cache_info(void)
const char *dc, *ic;
/* Then read cache informations */
- if (_machine == PLATFORM_POWERMAC) {
+ if (machine_is(powermac)) {
dc = "d-cache-block-size";
ic = "i-cache-block-size";
} else {
@@ -484,7 +443,6 @@ void __init setup_system(void)
printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size);
printk("ppc64_interrupt_controller = 0x%ld\n",
ppc64_interrupt_controller);
- printk("platform = 0x%x\n", _machine);
printk("physicalMemorySize = 0x%lx\n", lmb_phys_mem_size());
printk("ppc64_caches.dcache_line_size = 0x%x\n",
ppc64_caches.dline_size);
@@ -516,7 +474,7 @@ static void __init irqstack_early_init(void)
* interrupt stacks must be under 256MB, we cannot afford to take
* SLB misses on them.
*/
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
softirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc_base(THREAD_SIZE,
THREAD_SIZE, 0x10000000));
@@ -549,7 +507,7 @@ static void __init emergency_stack_init(void)
*/
limit = min(0x10000000UL, lmb.rmo_size);
- for_each_cpu(i)
+ for_each_possible_cpu(i)
paca[i].emergency_sp =
__va(lmb_alloc_base(HW_PAGE_SIZE, 128, limit)) + HW_PAGE_SIZE;
}
@@ -602,12 +560,6 @@ void __init setup_arch(char **cmdline_p)
ppc_md.setup_arch();
- /* Use the default idle loop if the platform hasn't provided one. */
- if (NULL == ppc_md.idle_loop) {
- ppc_md.idle_loop = default_idle;
- printk(KERN_INFO "Using default idle loop\n");
- }
-
paging_init();
ppc64_boot_msg(0x15, "Setup Done");
}
@@ -672,7 +624,7 @@ void __init setup_per_cpu_areas(void)
size = PERCPU_ENOUGH_ROOM;
#endif
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
ptr = alloc_bootmem_node(NODE_DATA(cpu_to_node(i)), size);
if (!ptr)
panic("Cannot allocate cpu data for CPU %d\n", i);
diff --git a/trunk/arch/powerpc/kernel/signal_32.c b/trunk/arch/powerpc/kernel/signal_32.c
index d7a4e814974d..01e3c08cb550 100644
--- a/trunk/arch/powerpc/kernel/signal_32.c
+++ b/trunk/arch/powerpc/kernel/signal_32.c
@@ -42,6 +42,7 @@
#include
#include
+#include
#include
#include
#ifdef CONFIG_PPC64
diff --git a/trunk/arch/powerpc/kernel/signal_64.c b/trunk/arch/powerpc/kernel/signal_64.c
index 47f910380a6a..27f65b95184d 100644
--- a/trunk/arch/powerpc/kernel/signal_64.c
+++ b/trunk/arch/powerpc/kernel/signal_64.c
@@ -33,6 +33,7 @@
#include
#include
#include
+#include
#include
#define DEBUG_SIG 0
@@ -211,7 +212,7 @@ static inline void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs
/* Default to using normal stack */
newsp = regs->gpr[1];
- if (ka->sa.sa_flags & SA_ONSTACK) {
+ if ((ka->sa.sa_flags & SA_ONSTACK) && current->sas_ss_size) {
if (! on_sig_stack(regs->gpr[1]))
newsp = (current->sas_ss_sp + current->sas_ss_size);
}
diff --git a/trunk/arch/powerpc/kernel/smp.c b/trunk/arch/powerpc/kernel/smp.c
index 805eaedbc308..530f7dba0bd2 100644
--- a/trunk/arch/powerpc/kernel/smp.c
+++ b/trunk/arch/powerpc/kernel/smp.c
@@ -362,7 +362,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
smp_space_timers(max_cpus);
- for_each_cpu(cpu)
+ for_each_possible_cpu(cpu)
if (cpu != boot_cpuid)
smp_create_idle(cpu);
}
diff --git a/trunk/arch/ppc/kernel/swsusp.S b/trunk/arch/powerpc/kernel/swsusp_32.S
similarity index 100%
rename from trunk/arch/ppc/kernel/swsusp.S
rename to trunk/arch/powerpc/kernel/swsusp_32.S
diff --git a/trunk/arch/powerpc/kernel/syscalls.c b/trunk/arch/powerpc/kernel/syscalls.c
index ad895c99813b..9b69d99a9103 100644
--- a/trunk/arch/powerpc/kernel/syscalls.c
+++ b/trunk/arch/powerpc/kernel/syscalls.c
@@ -40,6 +40,7 @@
#include
#include
#include
+#include
#include
#include
diff --git a/trunk/arch/powerpc/kernel/sysfs.c b/trunk/arch/powerpc/kernel/sysfs.c
index 0f0c3a9ae2e5..73560ef6f802 100644
--- a/trunk/arch/powerpc/kernel/sysfs.c
+++ b/trunk/arch/powerpc/kernel/sysfs.c
@@ -65,20 +65,20 @@ static int __init smt_setup(void)
unsigned int cpu;
if (!cpu_has_feature(CPU_FTR_SMT))
- return 1;
+ return -ENODEV;
options = find_path_device("/options");
if (!options)
- return 1;
+ return -ENODEV;
val = (unsigned int *)get_property(options, "ibm,smt-snooze-delay",
NULL);
if (!smt_snooze_cmdline && val) {
- for_each_cpu(cpu)
+ for_each_possible_cpu(cpu)
per_cpu(smt_snooze_delay, cpu) = *val;
}
- return 1;
+ return 0;
}
__initcall(smt_setup);
@@ -93,7 +93,7 @@ static int __init setup_smt_snooze_delay(char *str)
smt_snooze_cmdline = 1;
if (get_option(&str, &snooze)) {
- for_each_cpu(cpu)
+ for_each_possible_cpu(cpu)
per_cpu(smt_snooze_delay, cpu) = snooze;
}
@@ -347,7 +347,7 @@ static int __init topology_init(void)
register_cpu_notifier(&sysfs_cpu_nb);
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
struct cpu *c = &per_cpu(cpu_devices, cpu);
#ifdef CONFIG_NUMA
diff --git a/trunk/arch/ppc/kernel/temp.c b/trunk/arch/powerpc/kernel/tau_6xx.c
similarity index 100%
rename from trunk/arch/ppc/kernel/temp.c
rename to trunk/arch/powerpc/kernel/tau_6xx.c
diff --git a/trunk/arch/powerpc/kernel/time.c b/trunk/arch/powerpc/kernel/time.c
index 4a27218a086c..24e3ad756de0 100644
--- a/trunk/arch/powerpc/kernel/time.c
+++ b/trunk/arch/powerpc/kernel/time.c
@@ -261,7 +261,7 @@ void snapshot_timebases(void)
if (!cpu_has_feature(CPU_FTR_PURR))
return;
- for_each_cpu(cpu)
+ for_each_possible_cpu(cpu)
spin_lock_init(&per_cpu(cpu_purr_data, cpu).lock);
on_each_cpu(snapshot_tb_and_purr, NULL, 0, 1);
}
@@ -751,7 +751,7 @@ void __init smp_space_timers(unsigned int max_cpus)
* systems works better if the two threads' timebase interrupts
* are staggered by half a jiffy with respect to each other.
*/
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
if (i == boot_cpuid)
continue;
if (i == (boot_cpuid ^ 1))
diff --git a/trunk/arch/powerpc/kernel/traps.c b/trunk/arch/powerpc/kernel/traps.c
index 9763faab6739..4cbde211eb69 100644
--- a/trunk/arch/powerpc/kernel/traps.c
+++ b/trunk/arch/powerpc/kernel/traps.c
@@ -97,7 +97,6 @@ static DEFINE_SPINLOCK(die_lock);
int die(const char *str, struct pt_regs *regs, long err)
{
static int die_counter, crash_dump_start = 0;
- int nl = 0;
if (debugger(regs))
return 1;
@@ -106,7 +105,7 @@ int die(const char *str, struct pt_regs *regs, long err)
spin_lock_irq(&die_lock);
bust_spinlocks(1);
#ifdef CONFIG_PMAC_BACKLIGHT
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
set_backlight_enable(1);
set_backlight_level(BACKLIGHT_MAX);
}
@@ -114,46 +113,18 @@ int die(const char *str, struct pt_regs *regs, long err)
printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
#ifdef CONFIG_PREEMPT
printk("PREEMPT ");
- nl = 1;
#endif
#ifdef CONFIG_SMP
printk("SMP NR_CPUS=%d ", NR_CPUS);
- nl = 1;
#endif
#ifdef CONFIG_DEBUG_PAGEALLOC
printk("DEBUG_PAGEALLOC ");
- nl = 1;
#endif
#ifdef CONFIG_NUMA
printk("NUMA ");
- nl = 1;
#endif
-#ifdef CONFIG_PPC64
- switch (_machine) {
- case PLATFORM_PSERIES:
- printk("PSERIES ");
- nl = 1;
- break;
- case PLATFORM_PSERIES_LPAR:
- printk("PSERIES LPAR ");
- nl = 1;
- break;
- case PLATFORM_ISERIES_LPAR:
- printk("ISERIES LPAR ");
- nl = 1;
- break;
- case PLATFORM_POWERMAC:
- printk("POWERMAC ");
- nl = 1;
- break;
- case PLATFORM_CELL:
- printk("CELL ");
- nl = 1;
- break;
- }
-#endif
- if (nl)
- printk("\n");
+ printk("%s\n", ppc_md.name ? "" : ppc_md.name);
+
print_modules();
show_regs(regs);
bust_spinlocks(0);
diff --git a/trunk/arch/powerpc/kernel/vdso.c b/trunk/arch/powerpc/kernel/vdso.c
index ec8370368423..573afb68d69e 100644
--- a/trunk/arch/powerpc/kernel/vdso.c
+++ b/trunk/arch/powerpc/kernel/vdso.c
@@ -33,6 +33,7 @@
#include
#include
#include
+#include
#include
#include
@@ -667,7 +668,13 @@ void __init vdso_init(void)
vdso_data->version.major = SYSTEMCFG_MAJOR;
vdso_data->version.minor = SYSTEMCFG_MINOR;
vdso_data->processor = mfspr(SPRN_PVR);
- vdso_data->platform = _machine;
+ /*
+ * Fake the old platform number for pSeries and iSeries and add
+ * in LPAR bit if necessary
+ */
+ vdso_data->platform = machine_is(iseries) ? 0x200 : 0x100;
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ vdso_data->platform |= 1;
vdso_data->physicalMemorySize = lmb_phys_mem_size();
vdso_data->dcache_size = ppc64_caches.dsize;
vdso_data->dcache_line_size = ppc64_caches.dline_size;
diff --git a/trunk/arch/powerpc/kernel/vdso32/sigtramp.S b/trunk/arch/powerpc/kernel/vdso32/sigtramp.S
index e04642781917..0c6a37b29dde 100644
--- a/trunk/arch/powerpc/kernel/vdso32/sigtramp.S
+++ b/trunk/arch/powerpc/kernel/vdso32/sigtramp.S
@@ -261,7 +261,7 @@ V_FUNCTION_END(__kernel_sigtramp_rt32)
.Lcie_start:
.long 0 /* CIE ID */
.byte 1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
+ .string "zRS" /* NUL-terminated augmentation string */
.uleb128 4 /* Code alignment factor */
.sleb128 -4 /* Data alignment factor */
.byte 67 /* Return address register column, ap */
diff --git a/trunk/arch/powerpc/kernel/vdso64/sigtramp.S b/trunk/arch/powerpc/kernel/vdso64/sigtramp.S
index 31b604ab56de..7479edb101b8 100644
--- a/trunk/arch/powerpc/kernel/vdso64/sigtramp.S
+++ b/trunk/arch/powerpc/kernel/vdso64/sigtramp.S
@@ -263,7 +263,7 @@ V_FUNCTION_END(__kernel_sigtramp_rt64)
.Lcie_start:
.long 0 /* CIE ID */
.byte 1 /* Version number */
- .string "zR" /* NUL-terminated augmentation string */
+ .string "zRS" /* NUL-terminated augmentation string */
.uleb128 4 /* Code alignment factor */
.sleb128 -8 /* Data alignment factor */
.byte 67 /* Return address register column, ap */
diff --git a/trunk/arch/powerpc/kernel/vmlinux.lds.S b/trunk/arch/powerpc/kernel/vmlinux.lds.S
index 7fa7b15fd8e6..fe79c2584cb0 100644
--- a/trunk/arch/powerpc/kernel/vmlinux.lds.S
+++ b/trunk/arch/powerpc/kernel/vmlinux.lds.S
@@ -1,9 +1,11 @@
#include
#ifdef CONFIG_PPC64
#include
+#define PROVIDE32(x) PROVIDE(__unused__##x)
#else
#define PAGE_SIZE 4096
#define KERNELBASE CONFIG_KERNEL_START
+#define PROVIDE32(x) PROVIDE(x)
#endif
#include
@@ -18,43 +20,42 @@ jiffies = jiffies_64 + 4;
#endif
SECTIONS
{
- /* Sections to be discarded. */
- /DISCARD/ : {
- *(.exitcall.exit)
- *(.exit.data)
- }
-
- . = KERNELBASE;
-
- /* Read-only sections, merged into text segment: */
- .text : {
- *(.text .text.*)
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- *(.fixup)
-#ifdef CONFIG_PPC32
- *(.got1)
- __got2_start = .;
- *(.got2)
- __got2_end = .;
-#else
- . = ALIGN(PAGE_SIZE);
- _etext = .;
-#endif
- }
-#ifdef CONFIG_PPC32
- _etext = .;
- PROVIDE (etext = .);
+ /* Sections to be discarded. */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ *(.exit.data)
+ }
- RODATA
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
+ . = KERNELBASE;
- .fixup : { *(.fixup) }
-#endif
+/*
+ * Text, read only data and other permanent read-only sections
+ */
+
+ /* Text and gots */
+ .text : {
+ *(.text .text.*)
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.fixup)
+#ifdef CONFIG_PPC32
+ *(.got1)
+ __got2_start = .;
+ *(.got2)
+ __got2_end = .;
+#endif /* CONFIG_PPC32 */
+
+ . = ALIGN(PAGE_SIZE);
+ _etext = .;
+ PROVIDE32 (etext = .);
+ }
+
+ /* Read-only data */
+ RODATA
+
+ /* Exception & bug tables */
__ex_table : {
__start___ex_table = .;
*(__ex_table)
@@ -67,192 +68,172 @@ SECTIONS
__stop___bug_table = .;
}
-#ifdef CONFIG_PPC64
+/*
+ * Init sections discarded at runtime
+ */
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .;
+
+ .init.text : {
+ _sinittext = .;
+ *(.init.text)
+ _einittext = .;
+ }
+
+ /* .exit.text is discarded at runtime, not link time,
+ * to deal with references from __bug_table
+ */
+ .exit.text : { *(.exit.text) }
+
+ .init.data : {
+ *(.init.data);
+ __vtop_table_begin = .;
+ *(.vtop_fixup);
+ __vtop_table_end = .;
+ __ptov_table_begin = .;
+ *(.ptov_fixup);
+ __ptov_table_end = .;
+ }
+
+ . = ALIGN(16);
+ .init.setup : {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
+
+ .initcall.init : {
+ __initcall_start = .;
+ *(.initcall1.init)
+ *(.initcall2.init)
+ *(.initcall3.init)
+ *(.initcall4.init)
+ *(.initcall5.init)
+ *(.initcall6.init)
+ *(.initcall7.init)
+ __initcall_end = .;
+ }
+
+ .con_initcall.init : {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+
+ SECURITY_INIT
+
+ . = ALIGN(8);
__ftr_fixup : {
__start___ftr_fixup = .;
*(__ftr_fixup)
__stop___ftr_fixup = .;
}
- RODATA
-#endif
+ . = ALIGN(PAGE_SIZE);
+ .init.ramfs : {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ }
#ifdef CONFIG_PPC32
- /* Read-write section, merged into data segment: */
- . = ALIGN(PAGE_SIZE);
- _sdata = .;
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.got.plt) *(.got)
- *(.dynamic)
- CONSTRUCTORS
- }
-
- . = ALIGN(PAGE_SIZE);
- __nosave_begin = .;
- .data_nosave : { *(.data.nosave) }
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
-
- . = ALIGN(32);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
- _edata = .;
- PROVIDE (edata = .);
-
- . = ALIGN(8192);
- .data.init_task : { *(.data.init_task) }
+ . = ALIGN(32);
+#else
+ . = ALIGN(128);
#endif
+ .data.percpu : {
+ __per_cpu_start = .;
+ *(.data.percpu)
+ __per_cpu_end = .;
+ }
- /* will be freed after init */
- . = ALIGN(PAGE_SIZE);
- __init_begin = .;
- .init.text : {
- _sinittext = .;
- *(.init.text)
- _einittext = .;
- }
-#ifdef CONFIG_PPC32
- /* .exit.text is discarded at runtime, not link time,
- to deal with references from __bug_table */
- .exit.text : { *(.exit.text) }
-#endif
- .init.data : {
- *(.init.data);
- __vtop_table_begin = .;
- *(.vtop_fixup);
- __vtop_table_end = .;
- __ptov_table_begin = .;
- *(.ptov_fixup);
- __ptov_table_end = .;
- }
-
- . = ALIGN(16);
- .init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
-
- .initcall.init : {
- __initcall_start = .;
- *(.initcall1.init)
- *(.initcall2.init)
- *(.initcall3.init)
- *(.initcall4.init)
- *(.initcall5.init)
- *(.initcall6.init)
- *(.initcall7.init)
- __initcall_end = .;
- }
-
- .con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
-
- SECURITY_INIT
+ . = ALIGN(8);
+ .machine.desc : {
+ __machine_desc_start = . ;
+ *(.machine.desc)
+ __machine_desc_end = . ;
+ }
+
+ /* freed after init ends here */
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
+
+/*
+ * And now the various read/write data
+ */
+
+ . = ALIGN(PAGE_SIZE);
+ _sdata = .;
#ifdef CONFIG_PPC32
- __start___ftr_fixup = .;
- __ftr_fixup : { *(__ftr_fixup) }
- __stop___ftr_fixup = .;
+ .data :
+ {
+ *(.data)
+ *(.sdata)
+ *(.got.plt) *(.got)
+ }
#else
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
+ .data : {
+ *(.data .data.rel* .toc1)
+ *(.branch_lt)
+ }
-#ifdef CONFIG_PPC32
- . = ALIGN(32);
+ .opd : {
+ *(.opd)
+ }
+
+ .got : {
+ __toc_start = .;
+ *(.got)
+ *(.toc)
+ }
#endif
- .data.percpu : {
- __per_cpu_start = .;
- *(.data.percpu)
- __per_cpu_end = .;
- }
- . = ALIGN(PAGE_SIZE);
-#ifdef CONFIG_PPC64
- . = ALIGN(16384);
- __init_end = .;
- /* freed after init ends here */
-
- /* Read/write sections */
- . = ALIGN(PAGE_SIZE);
- . = ALIGN(16384);
- _sdata = .;
- /* The initial task and kernel stack */
- .data.init_task : {
- *(.data.init_task)
- }
-
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : {
- *(.data.page_aligned)
- }
-
- .data.cacheline_aligned : {
- *(.data.cacheline_aligned)
- }
-
- .data : {
- *(.data .data.rel* .toc1)
- *(.branch_lt)
- }
-
- .opd : {
- *(.opd)
- }
-
- .got : {
- __toc_start = .;
- *(.got)
- *(.toc)
- . = ALIGN(PAGE_SIZE);
- _edata = .;
- }
-
- . = ALIGN(PAGE_SIZE);
+ . = ALIGN(PAGE_SIZE);
+ _edata = .;
+ PROVIDE32 (edata = .);
+
+ /* The initial task and kernel stack */
+#ifdef CONFIG_PPC32
+ . = ALIGN(8192);
#else
- __initramfs_start = .;
- .init.ramfs : {
- *(.init.ramfs)
- }
- __initramfs_end = .;
+ . = ALIGN(16384);
+#endif
+ .data.init_task : {
+ *(.data.init_task)
+ }
- . = ALIGN(4096);
- __init_end = .;
+ . = ALIGN(PAGE_SIZE);
+ .data.page_aligned : {
+ *(.data.page_aligned)
+ }
- . = ALIGN(4096);
- _sextratext = .;
- _eextratext = .;
+ .data.cacheline_aligned : {
+ *(.data.cacheline_aligned)
+ }
- __bss_start = .;
-#endif
+ . = ALIGN(PAGE_SIZE);
+ __data_nosave : {
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+ }
- .bss : {
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- __bss_stop = .;
- }
+/*
+ * And finally the bss
+ */
+
+ .bss : {
+ __bss_start = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ __bss_stop = .;
+ }
-#ifdef CONFIG_PPC64
- . = ALIGN(PAGE_SIZE);
-#endif
- _end = . ;
-#ifdef CONFIG_PPC32
- PROVIDE (end = .);
-#endif
+ . = ALIGN(PAGE_SIZE);
+ _end = . ;
+ PROVIDE32 (end = .);
}
diff --git a/trunk/arch/powerpc/lib/sstep.c b/trunk/arch/powerpc/lib/sstep.c
index 666c2aa55016..c251d9936612 100644
--- a/trunk/arch/powerpc/lib/sstep.c
+++ b/trunk/arch/powerpc/lib/sstep.c
@@ -18,7 +18,7 @@ extern char system_call_common[];
#ifdef CONFIG_PPC64
/* Bits in SRR1 that are copied from MSR */
-#define MSR_MASK 0xffffffff87c0ffff
+#define MSR_MASK 0xffffffff87c0ffffUL
#else
#define MSR_MASK 0x87c0ffff
#endif
diff --git a/trunk/arch/ppc/math-emu/Makefile b/trunk/arch/powerpc/math-emu/Makefile
similarity index 100%
rename from trunk/arch/ppc/math-emu/Makefile
rename to trunk/arch/powerpc/math-emu/Makefile
diff --git a/trunk/arch/ppc/math-emu/double.h b/trunk/arch/powerpc/math-emu/double.h
similarity index 100%
rename from trunk/arch/ppc/math-emu/double.h
rename to trunk/arch/powerpc/math-emu/double.h
diff --git a/trunk/arch/ppc/math-emu/fabs.c b/trunk/arch/powerpc/math-emu/fabs.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fabs.c
rename to trunk/arch/powerpc/math-emu/fabs.c
diff --git a/trunk/arch/ppc/math-emu/fadd.c b/trunk/arch/powerpc/math-emu/fadd.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fadd.c
rename to trunk/arch/powerpc/math-emu/fadd.c
diff --git a/trunk/arch/ppc/math-emu/fadds.c b/trunk/arch/powerpc/math-emu/fadds.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fadds.c
rename to trunk/arch/powerpc/math-emu/fadds.c
diff --git a/trunk/arch/ppc/math-emu/fcmpo.c b/trunk/arch/powerpc/math-emu/fcmpo.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fcmpo.c
rename to trunk/arch/powerpc/math-emu/fcmpo.c
diff --git a/trunk/arch/ppc/math-emu/fcmpu.c b/trunk/arch/powerpc/math-emu/fcmpu.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fcmpu.c
rename to trunk/arch/powerpc/math-emu/fcmpu.c
diff --git a/trunk/arch/ppc/math-emu/fctiw.c b/trunk/arch/powerpc/math-emu/fctiw.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fctiw.c
rename to trunk/arch/powerpc/math-emu/fctiw.c
diff --git a/trunk/arch/ppc/math-emu/fctiwz.c b/trunk/arch/powerpc/math-emu/fctiwz.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fctiwz.c
rename to trunk/arch/powerpc/math-emu/fctiwz.c
diff --git a/trunk/arch/ppc/math-emu/fdiv.c b/trunk/arch/powerpc/math-emu/fdiv.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fdiv.c
rename to trunk/arch/powerpc/math-emu/fdiv.c
diff --git a/trunk/arch/ppc/math-emu/fdivs.c b/trunk/arch/powerpc/math-emu/fdivs.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fdivs.c
rename to trunk/arch/powerpc/math-emu/fdivs.c
diff --git a/trunk/arch/ppc/math-emu/fmadd.c b/trunk/arch/powerpc/math-emu/fmadd.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fmadd.c
rename to trunk/arch/powerpc/math-emu/fmadd.c
diff --git a/trunk/arch/ppc/math-emu/fmadds.c b/trunk/arch/powerpc/math-emu/fmadds.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fmadds.c
rename to trunk/arch/powerpc/math-emu/fmadds.c
diff --git a/trunk/arch/ppc/math-emu/fmr.c b/trunk/arch/powerpc/math-emu/fmr.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fmr.c
rename to trunk/arch/powerpc/math-emu/fmr.c
diff --git a/trunk/arch/ppc/math-emu/fmsub.c b/trunk/arch/powerpc/math-emu/fmsub.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fmsub.c
rename to trunk/arch/powerpc/math-emu/fmsub.c
diff --git a/trunk/arch/ppc/math-emu/fmsubs.c b/trunk/arch/powerpc/math-emu/fmsubs.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fmsubs.c
rename to trunk/arch/powerpc/math-emu/fmsubs.c
diff --git a/trunk/arch/ppc/math-emu/fmul.c b/trunk/arch/powerpc/math-emu/fmul.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fmul.c
rename to trunk/arch/powerpc/math-emu/fmul.c
diff --git a/trunk/arch/ppc/math-emu/fmuls.c b/trunk/arch/powerpc/math-emu/fmuls.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fmuls.c
rename to trunk/arch/powerpc/math-emu/fmuls.c
diff --git a/trunk/arch/ppc/math-emu/fnabs.c b/trunk/arch/powerpc/math-emu/fnabs.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fnabs.c
rename to trunk/arch/powerpc/math-emu/fnabs.c
diff --git a/trunk/arch/ppc/math-emu/fneg.c b/trunk/arch/powerpc/math-emu/fneg.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fneg.c
rename to trunk/arch/powerpc/math-emu/fneg.c
diff --git a/trunk/arch/ppc/math-emu/fnmadd.c b/trunk/arch/powerpc/math-emu/fnmadd.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fnmadd.c
rename to trunk/arch/powerpc/math-emu/fnmadd.c
diff --git a/trunk/arch/ppc/math-emu/fnmadds.c b/trunk/arch/powerpc/math-emu/fnmadds.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fnmadds.c
rename to trunk/arch/powerpc/math-emu/fnmadds.c
diff --git a/trunk/arch/ppc/math-emu/fnmsub.c b/trunk/arch/powerpc/math-emu/fnmsub.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fnmsub.c
rename to trunk/arch/powerpc/math-emu/fnmsub.c
diff --git a/trunk/arch/ppc/math-emu/fnmsubs.c b/trunk/arch/powerpc/math-emu/fnmsubs.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fnmsubs.c
rename to trunk/arch/powerpc/math-emu/fnmsubs.c
diff --git a/trunk/arch/ppc/math-emu/fres.c b/trunk/arch/powerpc/math-emu/fres.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fres.c
rename to trunk/arch/powerpc/math-emu/fres.c
diff --git a/trunk/arch/ppc/math-emu/frsp.c b/trunk/arch/powerpc/math-emu/frsp.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/frsp.c
rename to trunk/arch/powerpc/math-emu/frsp.c
diff --git a/trunk/arch/ppc/math-emu/frsqrte.c b/trunk/arch/powerpc/math-emu/frsqrte.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/frsqrte.c
rename to trunk/arch/powerpc/math-emu/frsqrte.c
diff --git a/trunk/arch/ppc/math-emu/fsel.c b/trunk/arch/powerpc/math-emu/fsel.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fsel.c
rename to trunk/arch/powerpc/math-emu/fsel.c
diff --git a/trunk/arch/ppc/math-emu/fsqrt.c b/trunk/arch/powerpc/math-emu/fsqrt.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fsqrt.c
rename to trunk/arch/powerpc/math-emu/fsqrt.c
diff --git a/trunk/arch/ppc/math-emu/fsqrts.c b/trunk/arch/powerpc/math-emu/fsqrts.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fsqrts.c
rename to trunk/arch/powerpc/math-emu/fsqrts.c
diff --git a/trunk/arch/ppc/math-emu/fsub.c b/trunk/arch/powerpc/math-emu/fsub.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fsub.c
rename to trunk/arch/powerpc/math-emu/fsub.c
diff --git a/trunk/arch/ppc/math-emu/fsubs.c b/trunk/arch/powerpc/math-emu/fsubs.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/fsubs.c
rename to trunk/arch/powerpc/math-emu/fsubs.c
diff --git a/trunk/arch/ppc/math-emu/lfd.c b/trunk/arch/powerpc/math-emu/lfd.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/lfd.c
rename to trunk/arch/powerpc/math-emu/lfd.c
diff --git a/trunk/arch/ppc/math-emu/lfs.c b/trunk/arch/powerpc/math-emu/lfs.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/lfs.c
rename to trunk/arch/powerpc/math-emu/lfs.c
diff --git a/trunk/arch/ppc/math-emu/math.c b/trunk/arch/powerpc/math-emu/math.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/math.c
rename to trunk/arch/powerpc/math-emu/math.c
diff --git a/trunk/arch/ppc/math-emu/mcrfs.c b/trunk/arch/powerpc/math-emu/mcrfs.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/mcrfs.c
rename to trunk/arch/powerpc/math-emu/mcrfs.c
diff --git a/trunk/arch/ppc/math-emu/mffs.c b/trunk/arch/powerpc/math-emu/mffs.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/mffs.c
rename to trunk/arch/powerpc/math-emu/mffs.c
diff --git a/trunk/arch/ppc/math-emu/mtfsb0.c b/trunk/arch/powerpc/math-emu/mtfsb0.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/mtfsb0.c
rename to trunk/arch/powerpc/math-emu/mtfsb0.c
diff --git a/trunk/arch/ppc/math-emu/mtfsb1.c b/trunk/arch/powerpc/math-emu/mtfsb1.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/mtfsb1.c
rename to trunk/arch/powerpc/math-emu/mtfsb1.c
diff --git a/trunk/arch/ppc/math-emu/mtfsf.c b/trunk/arch/powerpc/math-emu/mtfsf.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/mtfsf.c
rename to trunk/arch/powerpc/math-emu/mtfsf.c
diff --git a/trunk/arch/ppc/math-emu/mtfsfi.c b/trunk/arch/powerpc/math-emu/mtfsfi.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/mtfsfi.c
rename to trunk/arch/powerpc/math-emu/mtfsfi.c
diff --git a/trunk/arch/ppc/math-emu/op-1.h b/trunk/arch/powerpc/math-emu/op-1.h
similarity index 100%
rename from trunk/arch/ppc/math-emu/op-1.h
rename to trunk/arch/powerpc/math-emu/op-1.h
diff --git a/trunk/arch/ppc/math-emu/op-2.h b/trunk/arch/powerpc/math-emu/op-2.h
similarity index 100%
rename from trunk/arch/ppc/math-emu/op-2.h
rename to trunk/arch/powerpc/math-emu/op-2.h
diff --git a/trunk/arch/ppc/math-emu/op-4.h b/trunk/arch/powerpc/math-emu/op-4.h
similarity index 100%
rename from trunk/arch/ppc/math-emu/op-4.h
rename to trunk/arch/powerpc/math-emu/op-4.h
diff --git a/trunk/arch/ppc/math-emu/op-common.h b/trunk/arch/powerpc/math-emu/op-common.h
similarity index 100%
rename from trunk/arch/ppc/math-emu/op-common.h
rename to trunk/arch/powerpc/math-emu/op-common.h
diff --git a/trunk/arch/ppc/math-emu/sfp-machine.h b/trunk/arch/powerpc/math-emu/sfp-machine.h
similarity index 100%
rename from trunk/arch/ppc/math-emu/sfp-machine.h
rename to trunk/arch/powerpc/math-emu/sfp-machine.h
diff --git a/trunk/arch/ppc/math-emu/single.h b/trunk/arch/powerpc/math-emu/single.h
similarity index 100%
rename from trunk/arch/ppc/math-emu/single.h
rename to trunk/arch/powerpc/math-emu/single.h
diff --git a/trunk/arch/ppc/math-emu/soft-fp.h b/trunk/arch/powerpc/math-emu/soft-fp.h
similarity index 100%
rename from trunk/arch/ppc/math-emu/soft-fp.h
rename to trunk/arch/powerpc/math-emu/soft-fp.h
diff --git a/trunk/arch/ppc/math-emu/stfd.c b/trunk/arch/powerpc/math-emu/stfd.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/stfd.c
rename to trunk/arch/powerpc/math-emu/stfd.c
diff --git a/trunk/arch/ppc/math-emu/stfiwx.c b/trunk/arch/powerpc/math-emu/stfiwx.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/stfiwx.c
rename to trunk/arch/powerpc/math-emu/stfiwx.c
diff --git a/trunk/arch/ppc/math-emu/stfs.c b/trunk/arch/powerpc/math-emu/stfs.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/stfs.c
rename to trunk/arch/powerpc/math-emu/stfs.c
diff --git a/trunk/arch/ppc/math-emu/types.c b/trunk/arch/powerpc/math-emu/types.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/types.c
rename to trunk/arch/powerpc/math-emu/types.c
diff --git a/trunk/arch/ppc/math-emu/udivmodti4.c b/trunk/arch/powerpc/math-emu/udivmodti4.c
similarity index 100%
rename from trunk/arch/ppc/math-emu/udivmodti4.c
rename to trunk/arch/powerpc/math-emu/udivmodti4.c
diff --git a/trunk/arch/powerpc/mm/fault.c b/trunk/arch/powerpc/mm/fault.c
index ec4adcb4bc28..5aea0909a5ec 100644
--- a/trunk/arch/powerpc/mm/fault.c
+++ b/trunk/arch/powerpc/mm/fault.c
@@ -267,25 +267,29 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
#endif
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
pte_t *ptep;
+ pmd_t *pmdp;
/* Since 4xx/Book-E supports per-page execute permission,
* we lazily flush dcache to icache. */
ptep = NULL;
- if (get_pteptr(mm, address, &ptep) && pte_present(*ptep)) {
- struct page *page = pte_page(*ptep);
-
- if (! test_bit(PG_arch_1, &page->flags)) {
- flush_dcache_icache_page(page);
- set_bit(PG_arch_1, &page->flags);
+ if (get_pteptr(mm, address, &ptep, &pmdp)) {
+ spinlock_t *ptl = pte_lockptr(mm, pmdp);
+ spin_lock(ptl);
+ if (pte_present(*ptep)) {
+ struct page *page = pte_page(*ptep);
+
+ if (!test_bit(PG_arch_1, &page->flags)) {
+ flush_dcache_icache_page(page);
+ set_bit(PG_arch_1, &page->flags);
+ }
+ pte_update(ptep, 0, _PAGE_HWEXEC);
+ _tlbie(address);
+ pte_unmap_unlock(ptep, ptl);
+ up_read(&mm->mmap_sem);
+ return 0;
}
- pte_update(ptep, 0, _PAGE_HWEXEC);
- _tlbie(address);
- pte_unmap(ptep);
- up_read(&mm->mmap_sem);
- return 0;
+ pte_unmap_unlock(ptep, ptl);
}
- if (ptep != NULL)
- pte_unmap(ptep);
#endif
/* a write */
} else if (is_write) {
diff --git a/trunk/arch/powerpc/mm/hash_utils_64.c b/trunk/arch/powerpc/mm/hash_utils_64.c
index 89b35c181314..c006d9039633 100644
--- a/trunk/arch/powerpc/mm/hash_utils_64.c
+++ b/trunk/arch/powerpc/mm/hash_utils_64.c
@@ -167,7 +167,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
* normal insert callback here.
*/
#ifdef CONFIG_PPC_ISERIES
- if (_machine == PLATFORM_ISERIES_LPAR)
+ if (machine_is(iseries))
ret = iSeries_hpte_insert(hpteg, va,
paddr,
tmp_mode,
@@ -176,7 +176,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
else
#endif
#ifdef CONFIG_PPC_PSERIES
- if (_machine & PLATFORM_LPAR)
+ if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR))
ret = pSeries_lpar_hpte_insert(hpteg, va,
paddr,
tmp_mode,
@@ -295,8 +295,7 @@ static void __init htab_init_page_sizes(void)
* Not in the device-tree, let's fallback on known size
* list for 16M capable GP & GR
*/
- if ((_machine != PLATFORM_ISERIES_LPAR) &&
- cpu_has_feature(CPU_FTR_16M_PAGE))
+ if (cpu_has_feature(CPU_FTR_16M_PAGE) && !machine_is(iseries))
memcpy(mmu_psize_defs, mmu_psize_defaults_gp,
sizeof(mmu_psize_defaults_gp));
found:
diff --git a/trunk/arch/powerpc/mm/mem.c b/trunk/arch/powerpc/mm/mem.c
index 5e435a9c3431..741dd8802d49 100644
--- a/trunk/arch/powerpc/mm/mem.c
+++ b/trunk/arch/powerpc/mm/mem.c
@@ -342,7 +342,7 @@ void __init mem_init(void)
#ifdef CONFIG_NEED_MULTIPLE_NODES
for_each_online_node(nid) {
if (NODE_DATA(nid)->node_spanned_pages != 0) {
- printk("freeing bootmem node %x\n", nid);
+ printk("freeing bootmem node %d\n", nid);
totalram_pages +=
free_all_bootmem_node(NODE_DATA(nid));
}
diff --git a/trunk/arch/powerpc/mm/numa.c b/trunk/arch/powerpc/mm/numa.c
index e89b22aa539e..0a335f34974c 100644
--- a/trunk/arch/powerpc/mm/numa.c
+++ b/trunk/arch/powerpc/mm/numa.c
@@ -756,6 +756,7 @@ int hot_add_scn_to_nid(unsigned long scn_addr)
struct device_node *memory = NULL;
nodemask_t nodes;
int default_nid = any_online_node(NODE_MASK_ALL);
+ int nid;
if (!numa_enabled || (min_common_depth < 0))
return default_nid;
@@ -790,6 +791,7 @@ int hot_add_scn_to_nid(unsigned long scn_addr)
goto ha_new_range;
}
BUG(); /* section address should be found above */
+ return 0;
/* Temporary code to ensure that returned node is not empty */
got_nid:
diff --git a/trunk/arch/powerpc/mm/pgtable_32.c b/trunk/arch/powerpc/mm/pgtable_32.c
index d296eb6b4545..90628601fac7 100644
--- a/trunk/arch/powerpc/mm/pgtable_32.c
+++ b/trunk/arch/powerpc/mm/pgtable_32.c
@@ -372,7 +372,7 @@ void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
* the PTE pointer is unmodified if PTE is not found.
*/
int
-get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep)
+get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, pmd_t **pmdp)
{
pgd_t *pgd;
pmd_t *pmd;
@@ -387,6 +387,8 @@ get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep)
if (pte) {
retval = 1;
*ptep = pte;
+ if (pmdp)
+ *pmdp = pmd;
/* XXX caller needs to do pte_unmap, yuck */
}
}
@@ -424,7 +426,7 @@ unsigned long iopa(unsigned long addr)
mm = &init_mm;
pa = 0;
- if (get_pteptr(mm, addr, &pte)) {
+ if (get_pteptr(mm, addr, &pte, NULL)) {
pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
pte_unmap(pte);
}
diff --git a/trunk/arch/powerpc/mm/stab.c b/trunk/arch/powerpc/mm/stab.c
index 91d25fb27f89..4a9291d9fef8 100644
--- a/trunk/arch/powerpc/mm/stab.c
+++ b/trunk/arch/powerpc/mm/stab.c
@@ -239,7 +239,7 @@ void stabs_alloc(void)
if (cpu_has_feature(CPU_FTR_SLB))
return;
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
unsigned long newstab;
if (cpu == 0)
diff --git a/trunk/arch/powerpc/oprofile/Makefile b/trunk/arch/powerpc/oprofile/Makefile
index 554cd7c75321..f5f9859a8338 100644
--- a/trunk/arch/powerpc/oprofile/Makefile
+++ b/trunk/arch/powerpc/oprofile/Makefile
@@ -6,7 +6,7 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
oprofilefs.o oprofile_stats.o \
timer_int.o )
-oprofile-y := $(DRIVER_OBJS) common.o
+oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o
oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o
oprofile-$(CONFIG_PPC32) += op_model_7450.o
diff --git a/trunk/arch/powerpc/oprofile/backtrace.c b/trunk/arch/powerpc/oprofile/backtrace.c
new file mode 100644
index 000000000000..75f57bc96b40
--- /dev/null
+++ b/trunk/arch/powerpc/oprofile/backtrace.c
@@ -0,0 +1,126 @@
+/**
+ * Copyright (C) 2005 Brian Rogan , IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+**/
+
+#include
+#include
+#include
+#include
+
+#define STACK_SP(STACK) *(STACK)
+
+#define STACK_LR64(STACK) *((unsigned long *)(STACK) + 2)
+#define STACK_LR32(STACK) *((unsigned int *)(STACK) + 1)
+
+#ifdef CONFIG_PPC64
+#define STACK_LR(STACK) STACK_LR64(STACK)
+#else
+#define STACK_LR(STACK) STACK_LR32(STACK)
+#endif
+
+static unsigned int user_getsp32(unsigned int sp, int is_first)
+{
+ unsigned int stack_frame[2];
+
+ if (!access_ok(VERIFY_READ, sp, sizeof(stack_frame)))
+ return 0;
+
+ /*
+ * The most likely reason for this is that we returned -EFAULT,
+ * which means that we've done all that we can do from
+ * interrupt context.
+ */
+ if (__copy_from_user_inatomic(stack_frame, (void *)(long)sp,
+ sizeof(stack_frame)))
+ return 0;
+
+ if (!is_first)
+ oprofile_add_trace(STACK_LR32(stack_frame));
+
+ /*
+ * We do not enforce increasing stack addresses here because
+ * we may transition to a different stack, eg a signal handler.
+ */
+ return STACK_SP(stack_frame);
+}
+
+#ifdef CONFIG_PPC64
+static unsigned long user_getsp64(unsigned long sp, int is_first)
+{
+ unsigned long stack_frame[3];
+
+ if (!access_ok(VERIFY_READ, sp, sizeof(stack_frame)))
+ return 0;
+
+ if (__copy_from_user_inatomic(stack_frame, (void *)sp,
+ sizeof(stack_frame)))
+ return 0;
+
+ if (!is_first)
+ oprofile_add_trace(STACK_LR64(stack_frame));
+
+ return STACK_SP(stack_frame);
+}
+#endif
+
+static unsigned long kernel_getsp(unsigned long sp, int is_first)
+{
+ unsigned long *stack_frame = (unsigned long *)sp;
+
+ if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
+ return 0;
+
+ if (!is_first)
+ oprofile_add_trace(STACK_LR(stack_frame));
+
+ /*
+ * We do not enforce increasing stack addresses here because
+ * we might be transitioning from an interrupt stack to a kernel
+ * stack. validate_sp() is designed to understand this, so just
+ * use it.
+ */
+ return STACK_SP(stack_frame);
+}
+
+void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth)
+{
+ unsigned long sp = regs->gpr[1];
+ int first_frame = 1;
+
+ /* We ditch the top stackframe so need to loop through an extra time */
+ depth += 1;
+
+ if (!user_mode(regs)) {
+ while (depth--) {
+ sp = kernel_getsp(sp, first_frame);
+ if (!sp)
+ break;
+ first_frame = 0;
+ }
+ } else {
+#ifdef CONFIG_PPC64
+ if (!test_thread_flag(TIF_32BIT)) {
+ while (depth--) {
+ sp = user_getsp64(sp, first_frame);
+ if (!sp)
+ break;
+ first_frame = 0;
+ }
+
+ return;
+ }
+#endif
+
+ while (depth--) {
+ sp = user_getsp32(sp, first_frame);
+ if (!sp)
+ break;
+ first_frame = 0;
+ }
+ }
+}
diff --git a/trunk/arch/powerpc/oprofile/common.c b/trunk/arch/powerpc/oprofile/common.c
index cc2535be3a73..5b1de7e8041e 100644
--- a/trunk/arch/powerpc/oprofile/common.c
+++ b/trunk/arch/powerpc/oprofile/common.c
@@ -117,18 +117,10 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
-#ifdef CONFIG_PPC64
- oprofilefs_create_ulong(sb, root, "backtrace_spinlocks",
- &sys.backtrace_spinlocks);
-#endif
/* Default to tracing both kernel and user */
sys.enable_kernel = 1;
sys.enable_user = 1;
-#ifdef CONFIG_PPC64
- /* Turn on backtracing through spinlocks by default */
- sys.backtrace_spinlocks = 1;
-#endif
return 0;
}
@@ -168,6 +160,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
ops->shutdown = op_powerpc_shutdown;
ops->start = op_powerpc_start;
ops->stop = op_powerpc_stop;
+ ops->backtrace = op_powerpc_backtrace;
printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
ops->cpu_type);
diff --git a/trunk/arch/powerpc/oprofile/op_model_7450.c b/trunk/arch/powerpc/oprofile/op_model_7450.c
index 32abfdbb0eb1..e0491c3c71f1 100644
--- a/trunk/arch/powerpc/oprofile/op_model_7450.c
+++ b/trunk/arch/powerpc/oprofile/op_model_7450.c
@@ -176,13 +176,13 @@ static void fsl7450_handle_interrupt(struct pt_regs *regs,
mtmsr(mfmsr() | MSR_PMM);
pc = mfspr(SPRN_SIAR);
- is_kernel = (pc >= KERNELBASE);
+ is_kernel = is_kernel_addr(pc);
for (i = 0; i < NUM_CTRS; ++i) {
val = ctr_read(i);
if (val < 0) {
if (oprofile_running && ctr[i].enabled) {
- oprofile_add_pc(pc, is_kernel, i);
+ oprofile_add_ext_sample(pc, regs, i, is_kernel);
ctr_write(i, reset_value[i]);
} else {
ctr_write(i, 0);
diff --git a/trunk/arch/powerpc/oprofile/op_model_fsl_booke.c b/trunk/arch/powerpc/oprofile/op_model_fsl_booke.c
index 26539cda6023..93d63e62662f 100644
--- a/trunk/arch/powerpc/oprofile/op_model_fsl_booke.c
+++ b/trunk/arch/powerpc/oprofile/op_model_fsl_booke.c
@@ -154,13 +154,13 @@ static void fsl_booke_handle_interrupt(struct pt_regs *regs,
mtmsr(mfmsr() | MSR_PMM);
pc = regs->nip;
- is_kernel = (pc >= KERNELBASE);
+ is_kernel = is_kernel_addr(pc);
for (i = 0; i < num_counters; ++i) {
val = ctr_read(i);
if (val < 0) {
if (oprofile_running && ctr[i].enabled) {
- oprofile_add_pc(pc, is_kernel, i);
+ oprofile_add_ext_sample(pc, regs, i, is_kernel);
ctr_write(i, reset_value[i]);
} else {
ctr_write(i, 0);
diff --git a/trunk/arch/powerpc/oprofile/op_model_power4.c b/trunk/arch/powerpc/oprofile/op_model_power4.c
index 4b06e53eb9b4..4c2beab1fdc1 100644
--- a/trunk/arch/powerpc/oprofile/op_model_power4.c
+++ b/trunk/arch/powerpc/oprofile/op_model_power4.c
@@ -25,18 +25,14 @@ static unsigned long reset_value[OP_MAX_COUNTER];
static int oprofile_running;
static int mmcra_has_sihv;
+/* Unfortunately these bits vary between CPUs */
+static unsigned long mmcra_sihv = MMCRA_SIHV;
+static unsigned long mmcra_sipr = MMCRA_SIPR;
/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
static u32 mmcr0_val;
static u64 mmcr1_val;
-static u32 mmcra_val;
-
-/*
- * Since we do not have an NMI, backtracing through spinlocks is
- * only a best guess. In light of this, allow it to be disabled at
- * runtime.
- */
-static int backtrace_spinlocks;
+static u64 mmcra_val;
static void power4_reg_setup(struct op_counter_config *ctr,
struct op_system_config *sys,
@@ -63,8 +59,6 @@ static void power4_reg_setup(struct op_counter_config *ctr,
mmcr1_val = sys->mmcr1;
mmcra_val = sys->mmcra;
- backtrace_spinlocks = sys->backtrace_spinlocks;
-
for (i = 0; i < cur_cpu_spec->num_pmcs; ++i)
reset_value[i] = 0x80000000UL - ctr[i].count;
@@ -197,25 +191,6 @@ static void __attribute_used__ kernel_unknown_bucket(void)
{
}
-static unsigned long check_spinlock_pc(struct pt_regs *regs,
- unsigned long profile_pc)
-{
- unsigned long pc = instruction_pointer(regs);
-
- /*
- * If both the SIAR (sampled instruction) and the perfmon exception
- * occurred in a spinlock region then we account the sample to the
- * calling function. This isnt 100% correct, we really need soft
- * IRQ disable so we always get the perfmon exception at the
- * point at which the SIAR is set.
- */
- if (backtrace_spinlocks && in_lock_functions(pc) &&
- in_lock_functions(profile_pc))
- return regs->link;
- else
- return profile_pc;
-}
-
/*
* On GQ and newer the MMCRA stores the HV and PR bits at the time
* the SIAR was sampled. We use that to work out if the SIAR was sampled in
@@ -228,17 +203,17 @@ static unsigned long get_pc(struct pt_regs *regs)
/* Cant do much about it */
if (!mmcra_has_sihv)
- return check_spinlock_pc(regs, pc);
+ return pc;
mmcra = mfspr(SPRN_MMCRA);
/* Were we in the hypervisor? */
- if (firmware_has_feature(FW_FEATURE_LPAR) && (mmcra & MMCRA_SIHV))
+ if (firmware_has_feature(FW_FEATURE_LPAR) && (mmcra & mmcra_sihv))
/* function descriptor madness */
return *((unsigned long *)hypervisor_bucket);
/* We were in userspace, nothing to do */
- if (mmcra & MMCRA_SIPR)
+ if (mmcra & mmcra_sipr)
return pc;
#ifdef CONFIG_PPC_RTAS
@@ -257,7 +232,7 @@ static unsigned long get_pc(struct pt_regs *regs)
/* function descriptor madness */
return *((unsigned long *)kernel_unknown_bucket);
- return check_spinlock_pc(regs, pc);
+ return pc;
}
static int get_kernel(unsigned long pc)
@@ -268,7 +243,7 @@ static int get_kernel(unsigned long pc)
is_kernel = is_kernel_addr(pc);
} else {
unsigned long mmcra = mfspr(SPRN_MMCRA);
- is_kernel = ((mmcra & MMCRA_SIPR) == 0);
+ is_kernel = ((mmcra & mmcra_sipr) == 0);
}
return is_kernel;
@@ -293,7 +268,7 @@ static void power4_handle_interrupt(struct pt_regs *regs,
val = ctr_read(i);
if (val < 0) {
if (oprofile_running && ctr[i].enabled) {
- oprofile_add_pc(pc, is_kernel, i);
+ oprofile_add_ext_sample(pc, regs, i, is_kernel);
ctr_write(i, reset_value[i]);
} else {
ctr_write(i, 0);
diff --git a/trunk/arch/powerpc/oprofile/op_model_rs64.c b/trunk/arch/powerpc/oprofile/op_model_rs64.c
index 5c909ee609fe..042f8f4867ad 100644
--- a/trunk/arch/powerpc/oprofile/op_model_rs64.c
+++ b/trunk/arch/powerpc/oprofile/op_model_rs64.c
@@ -175,10 +175,13 @@ static void rs64_handle_interrupt(struct pt_regs *regs,
struct op_counter_config *ctr)
{
unsigned int mmcr0;
+ int is_kernel;
int val;
int i;
unsigned long pc = mfspr(SPRN_SIAR);
+ is_kernel = is_kernel_addr(pc);
+
/* set the PMM bit (see comment below) */
mtmsrd(mfmsr() | MSR_PMM);
@@ -186,7 +189,7 @@ static void rs64_handle_interrupt(struct pt_regs *regs,
val = ctr_read(i);
if (val < 0) {
if (ctr[i].enabled) {
- oprofile_add_pc(pc, is_kernel_addr(pc), i);
+ oprofile_add_ext_sample(pc, regs, i, is_kernel);
ctr_write(i, reset_value[i]);
} else {
ctr_write(i, 0);
diff --git a/trunk/arch/powerpc/platforms/85xx/Kconfig b/trunk/arch/powerpc/platforms/85xx/Kconfig
index d3d0ff745e84..06e371282f57 100644
--- a/trunk/arch/powerpc/platforms/85xx/Kconfig
+++ b/trunk/arch/powerpc/platforms/85xx/Kconfig
@@ -7,6 +7,7 @@ choice
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
+ select DEFAULT_UIMAGE
help
This option enables support for the MPC 8540 ADS board
diff --git a/trunk/arch/powerpc/platforms/cell/Kconfig b/trunk/arch/powerpc/platforms/cell/Kconfig
index 3157071e241c..c2a3db8edb0c 100644
--- a/trunk/arch/powerpc/platforms/cell/Kconfig
+++ b/trunk/arch/powerpc/platforms/cell/Kconfig
@@ -10,4 +10,9 @@ config SPU_FS
Units on machines implementing the Broadband Processor
Architecture.
+config SPUFS_MMAP
+ bool
+ depends on SPU_FS && SPARSEMEM && !PPC_64K_PAGES
+ default y
+
endmenu
diff --git a/trunk/arch/powerpc/platforms/cell/Makefile b/trunk/arch/powerpc/platforms/cell/Makefile
index 3b998a393e3f..e570bad06394 100644
--- a/trunk/arch/powerpc/platforms/cell/Makefile
+++ b/trunk/arch/powerpc/platforms/cell/Makefile
@@ -6,5 +6,11 @@ obj-$(CONFIG_SPU_FS) += spu-base.o spufs/
spu-base-y += spu_base.o spu_priv1.o
-builtin-spufs-$(CONFIG_SPU_FS) += spu_syscalls.o
-obj-y += $(builtin-spufs-m)
+# needed only when building loadable spufs.ko
+spufs-modular-$(CONFIG_SPU_FS) += spu_syscalls.o
+obj-y += $(spufs-modular-m)
+
+# always needed in kernel
+spufs-builtin-$(CONFIG_SPU_FS) += spu_callbacks.o
+obj-y += $(spufs-builtin-y) $(spufs-builtin-m)
+
diff --git a/trunk/arch/powerpc/platforms/cell/interrupt.c b/trunk/arch/powerpc/platforms/cell/interrupt.c
index 63aa52acf441..978be1c30c1b 100644
--- a/trunk/arch/powerpc/platforms/cell/interrupt.c
+++ b/trunk/arch/powerpc/platforms/cell/interrupt.c
@@ -63,7 +63,24 @@ static DEFINE_PER_CPU(struct iic, iic);
void iic_local_enable(void)
{
- out_be64(&__get_cpu_var(iic).regs->prio, 0xff);
+ struct iic *iic = &__get_cpu_var(iic);
+ u64 tmp;
+
+ /*
+ * There seems to be a bug that is present in DD2.x CPUs
+ * and still only partially fixed in DD3.1.
+ * This bug causes a value written to the priority register
+ * not to make it there, resulting in a system hang unless we
+ * write it again.
+ * Masking with 0xf0 is done because the Cell BE does not
+ * implement the lower four bits of the interrupt priority,
+ * they always read back as zeroes, although future CPUs
+ * might implement different bits.
+ */
+ do {
+ out_be64(&iic->regs->prio, 0xff);
+ tmp = in_be64(&iic->regs->prio);
+ } while ((tmp & 0xf0) != 0xf0);
}
void iic_local_disable(void)
@@ -123,7 +140,7 @@ static int iic_external_get_irq(struct iic_pending_bits pending)
pending.class != 2)
break;
irq = IIC_EXT_OFFSET
- + spider_get_irq(pending.prio + node * IIC_NODE_STRIDE)
+ + spider_get_irq(node)
+ node * IIC_NODE_STRIDE;
break;
case 0x01 ... 0x04:
@@ -174,38 +191,98 @@ int iic_get_irq(struct pt_regs *regs)
return irq;
}
-static int setup_iic(int cpu, struct iic *iic)
+/* hardcoded part to be compatible with older firmware */
+
+static int setup_iic_hardcoded(void)
{
struct device_node *np;
- int nodeid = cpu / 2;
+ int nodeid, cpu;
unsigned long regs;
+ struct iic *iic;
- for (np = of_find_node_by_type(NULL, "cpu");
- np;
- np = of_find_node_by_type(np, "cpu")) {
- if (nodeid == *(int *)get_property(np, "node-id", NULL))
- break;
+ for_each_cpu(cpu) {
+ iic = &per_cpu(iic, cpu);
+ nodeid = cpu/2;
+
+ for (np = of_find_node_by_type(NULL, "cpu");
+ np;
+ np = of_find_node_by_type(np, "cpu")) {
+ if (nodeid == *(int *)get_property(np, "node-id", NULL))
+ break;
+ }
+
+ if (!np) {
+ printk(KERN_WARNING "IIC: CPU %d not found\n", cpu);
+ iic->regs = NULL;
+ iic->target_id = 0xff;
+ return -ENODEV;
+ }
+
+ regs = *(long *)get_property(np, "iic", NULL);
+
+ /* hack until we have decided on the devtree info */
+ regs += 0x400;
+ if (cpu & 1)
+ regs += 0x20;
+
+ printk(KERN_INFO "IIC for CPU %d at %lx\n", cpu, regs);
+ iic->regs = ioremap(regs, sizeof(struct iic_regs));
+ iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe);
}
- if (!np) {
- printk(KERN_WARNING "IIC: CPU %d not found\n", cpu);
- iic->regs = NULL;
- iic->target_id = 0xff;
- return -ENODEV;
- }
+ return 0;
+}
- regs = *(long *)get_property(np, "iic", NULL);
+static int setup_iic(void)
+{
+ struct device_node *dn;
+ unsigned long *regs;
+ char *compatible;
+ unsigned *np, found = 0;
+ struct iic *iic = NULL;
+
+ for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
+ compatible = (char *)get_property(dn, "compatible", NULL);
+
+ if (!compatible) {
+ printk(KERN_WARNING "no compatible property found !\n");
+ continue;
+ }
- /* hack until we have decided on the devtree info */
- regs += 0x400;
- if (cpu & 1)
- regs += 0x20;
+ if (strstr(compatible, "IBM,CBEA-Internal-Interrupt-Controller"))
+ regs = (unsigned long *)get_property(dn,"reg", NULL);
+ else
+ continue;
- printk(KERN_DEBUG "IIC for CPU %d at %lx\n", cpu, regs);
- iic->regs = __ioremap(regs, sizeof(struct iic_regs),
- _PAGE_NO_CACHE);
- iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe);
- return 0;
+ if (!regs)
+ printk(KERN_WARNING "IIC: no reg property\n");
+
+ np = (unsigned int *)get_property(dn, "ibm,interrupt-server-ranges", NULL);
+
+ if (!np) {
+ printk(KERN_WARNING "IIC: CPU association not found\n");
+ iic->regs = NULL;
+ iic->target_id = 0xff;
+ return -ENODEV;
+ }
+
+ iic = &per_cpu(iic, np[0]);
+ iic->regs = ioremap(regs[0], sizeof(struct iic_regs));
+ iic->target_id = ((np[0] & 2) << 3) + ((np[0] & 1) ? 0xf : 0xe);
+ printk("IIC for CPU %d at %lx mapped to %p\n", np[0], regs[0], iic->regs);
+
+ iic = &per_cpu(iic, np[1]);
+ iic->regs = ioremap(regs[2], sizeof(struct iic_regs));
+ iic->target_id = ((np[1] & 2) << 3) + ((np[1] & 1) ? 0xf : 0xe);
+ printk("IIC for CPU %d at %lx mapped to %p\n", np[1], regs[2], iic->regs);
+
+ found++;
+ }
+
+ if (found)
+ return 0;
+ else
+ return -ENODEV;
}
#ifdef CONFIG_SMP
@@ -283,10 +360,12 @@ void iic_init_IRQ(void)
int cpu, irq_offset;
struct iic *iic;
+ if (setup_iic() < 0)
+ setup_iic_hardcoded();
+
irq_offset = 0;
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
iic = &per_cpu(iic, cpu);
- setup_iic(cpu, iic);
if (iic->regs)
out_be64(&iic->regs->prio, 0xff);
}
diff --git a/trunk/arch/powerpc/platforms/cell/interrupt.h b/trunk/arch/powerpc/platforms/cell/interrupt.h
index a14bd38791c0..799f77d98f96 100644
--- a/trunk/arch/powerpc/platforms/cell/interrupt.h
+++ b/trunk/arch/powerpc/platforms/cell/interrupt.h
@@ -57,7 +57,7 @@ extern void iic_local_disable(void);
extern u8 iic_get_target_id(int cpu);
extern void spider_init_IRQ(void);
-extern int spider_get_irq(unsigned long int_pending);
+extern int spider_get_irq(int node);
#endif
#endif /* ASM_CELL_PIC_H */
diff --git a/trunk/arch/powerpc/platforms/cell/iommu.c b/trunk/arch/powerpc/platforms/cell/iommu.c
index 46e7cb9c3e64..a49ceb799a8e 100644
--- a/trunk/arch/powerpc/platforms/cell/iommu.c
+++ b/trunk/arch/powerpc/platforms/cell/iommu.c
@@ -289,7 +289,7 @@ static void cell_do_map_iommu(struct cell_iommu *iommu,
ioc_base = iommu->mapped_base;
ioc_mmio_base = iommu->mapped_mmio_base;
- for (real_address = 0, io_address = 0;
+ for (real_address = 0, io_address = map_start;
io_address <= map_start + map_size;
real_address += io_page_size, io_address += io_page_size) {
ioste = get_iost_entry(fake_iopt, io_address, io_page_size);
@@ -302,7 +302,7 @@ static void cell_do_map_iommu(struct cell_iommu *iommu,
set_iopt_cache(ioc_mmio_base,
get_ioc_hash_1way(ioste, io_address),
get_ioc_tag(ioste, io_address),
- get_iopt_entry(real_address-map_start, ioid, IOPT_PROT_RW));
+ get_iopt_entry(real_address, ioid, IOPT_PROT_RW));
}
}
@@ -344,8 +344,8 @@ static int cell_map_iommu_hardcoded(int num_nodes)
/* node 0 */
iommu = &cell_iommus[0];
- iommu->mapped_base = __ioremap(0x20000511000, 0x1000, _PAGE_NO_CACHE);
- iommu->mapped_mmio_base = __ioremap(0x20000510000, 0x1000, _PAGE_NO_CACHE);
+ iommu->mapped_base = ioremap(0x20000511000, 0x1000);
+ iommu->mapped_mmio_base = ioremap(0x20000510000, 0x1000);
enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base);
@@ -357,8 +357,8 @@ static int cell_map_iommu_hardcoded(int num_nodes)
/* node 1 */
iommu = &cell_iommus[1];
- iommu->mapped_base = __ioremap(0x30000511000, 0x1000, _PAGE_NO_CACHE);
- iommu->mapped_mmio_base = __ioremap(0x30000510000, 0x1000, _PAGE_NO_CACHE);
+ iommu->mapped_base = ioremap(0x30000511000, 0x1000);
+ iommu->mapped_mmio_base = ioremap(0x30000510000, 0x1000);
enable_mapping(iommu->mapped_base, iommu->mapped_mmio_base);
@@ -407,8 +407,8 @@ static int cell_map_iommu(void)
iommu->base = *base;
iommu->mmio_base = *mmio_base;
- iommu->mapped_base = __ioremap(*base, 0x1000, _PAGE_NO_CACHE);
- iommu->mapped_mmio_base = __ioremap(*mmio_base, 0x1000, _PAGE_NO_CACHE);
+ iommu->mapped_base = ioremap(*base, 0x1000);
+ iommu->mapped_mmio_base = ioremap(*mmio_base, 0x1000);
enable_mapping(iommu->mapped_base,
iommu->mapped_mmio_base);
diff --git a/trunk/arch/powerpc/platforms/cell/pervasive.c b/trunk/arch/powerpc/platforms/cell/pervasive.c
index e0e051c675dd..7eed8c624517 100644
--- a/trunk/arch/powerpc/platforms/cell/pervasive.c
+++ b/trunk/arch/powerpc/platforms/cell/pervasive.c
@@ -203,7 +203,7 @@ static int __init cbe_find_pmd_mmio(int cpu, struct cbe_pervasive *p)
pr_debug("pervasive area for CPU %d at %lx, size %x\n",
cpu, real_address, size);
- p->regs = __ioremap(real_address, size, _PAGE_NO_CACHE);
+ p->regs = ioremap(real_address, size);
p->thread = thread;
return 0;
}
@@ -217,7 +217,7 @@ void __init cell_pervasive_init(void)
if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO))
return;
- for_each_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
p = &cbe_pervasive[cpu];
ret = cbe_find_pmd_mmio(cpu, p);
if (ret)
diff --git a/trunk/arch/powerpc/platforms/cell/setup.c b/trunk/arch/powerpc/platforms/cell/setup.c
index fec8e65b36ea..dac5d0365fde 100644
--- a/trunk/arch/powerpc/platforms/cell/setup.c
+++ b/trunk/arch/powerpc/platforms/cell/setup.c
@@ -195,9 +195,13 @@ static void __init cell_init_early(void)
}
-static int __init cell_probe(int platform)
+static int __init cell_probe(void)
{
- if (platform != PLATFORM_CELL)
+ /* XXX This is temporary, the Cell maintainer will come up with
+ * more appropriate detection logic
+ */
+ unsigned long root = of_get_flat_dt_root();
+ if (!of_flat_dt_is_compatible(root, "IBM,CPBW-1.0"))
return 0;
return 1;
@@ -212,7 +216,8 @@ static int cell_check_legacy_ioport(unsigned int baseport)
return -ENODEV;
}
-struct machdep_calls __initdata cell_md = {
+define_machine(cell) {
+ .name = "Cell",
.probe = cell_probe,
.setup_arch = cell_setup_arch,
.init_early = cell_init_early,
diff --git a/trunk/arch/powerpc/platforms/cell/spider-pic.c b/trunk/arch/powerpc/platforms/cell/spider-pic.c
index e74132188bdf..55cbdd77a62d 100644
--- a/trunk/arch/powerpc/platforms/cell/spider-pic.c
+++ b/trunk/arch/powerpc/platforms/cell/spider-pic.c
@@ -84,10 +84,11 @@ static void __iomem *spider_get_irq_config(int irq)
static void spider_enable_irq(unsigned int irq)
{
+ int nodeid = (irq / IIC_NODE_STRIDE) * 0x10;
void __iomem *cfg = spider_get_irq_config(irq);
irq = spider_get_nr(irq);
- out_be32(cfg, in_be32(cfg) | 0x3107000eu);
+ out_be32(cfg, (in_be32(cfg) & ~0xf0)| 0x3107000eu | nodeid);
out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq);
}
@@ -131,61 +132,108 @@ static struct hw_interrupt_type spider_pic = {
.end = spider_end_irq,
};
-
-int spider_get_irq(unsigned long int_pending)
+int spider_get_irq(int node)
{
- void __iomem *regs = spider_get_pic(int_pending);
unsigned long cs;
- int irq;
-
- cs = in_be32(regs + TIR_CS);
+ void __iomem *regs = spider_pics[node];
- irq = cs >> 24;
- if (irq != 63)
- return irq;
+ cs = in_be32(regs + TIR_CS) >> 24;
- return -1;
+ if (cs == 63)
+ return -1;
+ else
+ return cs;
}
-
-void spider_init_IRQ(void)
+
+/* hardcoded part to be compatible with older firmware */
+
+void spider_init_IRQ_hardcoded(void)
{
int node;
- struct device_node *dn;
- unsigned int *property;
long spiderpic;
+ long pics[] = { 0x24000008000, 0x34000008000 };
int n;
-/* FIXME: detect multiple PICs as soon as the device tree has them */
- for (node = 0; node < 1; node++) {
- dn = of_find_node_by_path("/");
- n = prom_n_addr_cells(dn);
- property = (unsigned int *) get_property(dn,
- "platform-spider-pic", NULL);
+ pr_debug("%s(%d): Using hardcoded defaults\n", __FUNCTION__, __LINE__);
- if (!property)
- continue;
- for (spiderpic = 0; n > 0; --n)
- spiderpic = (spiderpic << 32) + *property++;
+ for (node = 0; node < num_present_cpus()/2; node++) {
+ spiderpic = pics[node];
printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic);
- spider_pics[node] = __ioremap(spiderpic, 0x800, _PAGE_NO_CACHE);
+ spider_pics[node] = ioremap(spiderpic, 0x800);
for (n = 0; n < IIC_NUM_EXT; n++) {
int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
get_irq_desc(irq)->handler = &spider_pic;
+ }
/* do not mask any interrupts because of level */
out_be32(spider_pics[node] + TIR_MSK, 0x0);
-
+
/* disable edge detection clear */
/* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
-
+
/* enable interrupt packets to be output */
out_be32(spider_pics[node] + TIR_PIEN,
in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
-
+
/* Enable the interrupt detection enable bit. Do this last! */
out_be32(spider_pics[node] + TIR_DEN,
- in_be32(spider_pics[node] +TIR_DEN) | 0x1);
+ in_be32(spider_pics[node] + TIR_DEN) | 0x1);
+ }
+}
+
+void spider_init_IRQ(void)
+{
+ long spider_reg;
+ struct device_node *dn;
+ char *compatible;
+ int n, node = 0;
+
+ for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
+ compatible = (char *)get_property(dn, "compatible", NULL);
+ if (!compatible)
+ continue;
+
+ if (strstr(compatible, "CBEA,platform-spider-pic"))
+ spider_reg = *(long *)get_property(dn,"reg", NULL);
+ else if (strstr(compatible, "sti,platform-spider-pic")) {
+ spider_init_IRQ_hardcoded();
+ return;
+ } else
+ continue;
+
+ if (!spider_reg)
+ printk("interrupt controller does not have reg property !\n");
+
+ n = prom_n_addr_cells(dn);
+
+ if ( n != 2)
+ printk("reg property with invalid number of elements \n");
+
+ spider_pics[node] = ioremap(spider_reg, 0x800);
+
+ printk("SPIDER addr: %lx with %i addr_cells mapped to %p\n",
+ spider_reg, n, spider_pics[node]);
+
+ for (n = 0; n < IIC_NUM_EXT; n++) {
+ int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
+ get_irq_desc(irq)->handler = &spider_pic;
}
+
+ /* do not mask any interrupts because of level */
+ out_be32(spider_pics[node] + TIR_MSK, 0x0);
+
+ /* disable edge detection clear */
+ /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
+
+ /* enable interrupt packets to be output */
+ out_be32(spider_pics[node] + TIR_PIEN,
+ in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
+
+ /* Enable the interrupt detection enable bit. Do this last! */
+ out_be32(spider_pics[node] + TIR_DEN,
+ in_be32(spider_pics[node] + TIR_DEN) | 0x1);
+
+ node++;
}
}
diff --git a/trunk/arch/powerpc/platforms/cell/spu_base.c b/trunk/arch/powerpc/platforms/cell/spu_base.c
index a8fa1eeeb174..269dda4fd0b4 100644
--- a/trunk/arch/powerpc/platforms/cell/spu_base.c
+++ b/trunk/arch/powerpc/platforms/cell/spu_base.c
@@ -111,7 +111,7 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX
static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
{
- pr_debug("%s\n", __FUNCTION__);
+ pr_debug("%s, %lx, %lx\n", __FUNCTION__, dsisr, ea);
/* Handle kernel space hash faults immediately.
User hash faults need to be deferred to process context. */
@@ -168,7 +168,7 @@ static int __spu_trap_halt(struct spu *spu)
static int __spu_trap_tag_group(struct spu *spu)
{
pr_debug("%s\n", __FUNCTION__);
- /* wake_up(&spu->dma_wq); */
+ spu->mfc_callback(spu);
return 0;
}
@@ -242,6 +242,8 @@ spu_irq_class_1(int irq, void *data, struct pt_regs *regs)
spu_mfc_dsisr_set(spu, 0ul);
spu_int_stat_clear(spu, 1, stat);
spin_unlock(&spu->register_lock);
+ pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat,
+ dar, dsisr);
if (stat & 1) /* segment fault */
__spu_trap_data_seg(spu, dar);
@@ -484,14 +486,13 @@ int spu_irq_class_1_bottom(struct spu *spu)
ea = spu->dar;
dsisr = spu->dsisr;
- if (dsisr & MFC_DSISR_PTE_NOT_FOUND) {
+ if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) {
access = (_PAGE_PRESENT | _PAGE_USER);
access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL;
if (hash_page(ea, access, 0x300) != 0)
error |= CLASS1_ENABLE_STORAGE_FAULT_INTR;
}
- if ((error & CLASS1_ENABLE_STORAGE_FAULT_INTR) ||
- (dsisr & MFC_DSISR_ACCESS_DENIED)) {
+ if (error & CLASS1_ENABLE_STORAGE_FAULT_INTR) {
if ((ret = spu_handle_mm_fault(spu)) != 0)
error |= CLASS1_ENABLE_STORAGE_FAULT_INTR;
else
@@ -568,6 +569,11 @@ static int __init spu_map_device(struct spu *spu, struct device_node *spe)
if (!spu->local_store)
goto out;
+ prop = get_property(spe, "problem", NULL);
+ if (!prop)
+ goto out_unmap;
+ spu->problem_phys = *(unsigned long *)prop;
+
spu->problem= map_spe_prop(spe, "problem");
if (!spu->problem)
goto out_unmap;
@@ -632,6 +638,7 @@ static int __init create_spu(struct device_node *spe)
spu->ibox_callback = NULL;
spu->wbox_callback = NULL;
spu->stop_callback = NULL;
+ spu->mfc_callback = NULL;
mutex_lock(&spu_mutex);
spu->number = number++;
diff --git a/trunk/arch/powerpc/platforms/cell/spu_callbacks.c b/trunk/arch/powerpc/platforms/cell/spu_callbacks.c
new file mode 100644
index 000000000000..3a4245c926ad
--- /dev/null
+++ b/trunk/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -0,0 +1,345 @@
+/*
+ * System call callback functions for SPUs
+ */
+
+#define DEBUG
+
+#include
+#include
+#include
+
+#include
+#include
+#include
+
+/*
+ * This table defines the system calls that an SPU can call.
+ * It is currently a subset of the 64 bit powerpc system calls,
+ * with the exact semantics.
+ *
+ * The reasons for disabling some of the system calls are:
+ * 1. They interact with the way SPU syscalls are handled
+ * and we can't let them execute ever:
+ * restart_syscall, exit, for, execve, ptrace, ...
+ * 2. They are deprecated and replaced by other means:
+ * uselib, pciconfig_*, sysfs, ...
+ * 3. They are somewhat interacting with the system in a way
+ * we don't want an SPU to:
+ * reboot, init_module, mount, kexec_load
+ * 4. They are optional and we can't rely on them being
+ * linked into the kernel. Unfortunately, the cond_syscall
+ * helper does not work here as it does not add the necessary
+ * opd symbols:
+ * mbind, mq_open, ipc, ...
+ */
+
+void *spu_syscall_table[] = {
+ [__NR_restart_syscall] sys_ni_syscall, /* sys_restart_syscall */
+ [__NR_exit] sys_ni_syscall, /* sys_exit */
+ [__NR_fork] sys_ni_syscall, /* ppc_fork */
+ [__NR_read] sys_read,
+ [__NR_write] sys_write,
+ [__NR_open] sys_open,
+ [__NR_close] sys_close,
+ [__NR_waitpid] sys_waitpid,
+ [__NR_creat] sys_creat,
+ [__NR_link] sys_link,
+ [__NR_unlink] sys_unlink,
+ [__NR_execve] sys_ni_syscall, /* sys_execve */
+ [__NR_chdir] sys_chdir,
+ [__NR_time] sys_time,
+ [__NR_mknod] sys_mknod,
+ [__NR_chmod] sys_chmod,
+ [__NR_lchown] sys_lchown,
+ [__NR_break] sys_ni_syscall,
+ [__NR_oldstat] sys_ni_syscall,
+ [__NR_lseek] sys_lseek,
+ [__NR_getpid] sys_getpid,
+ [__NR_mount] sys_ni_syscall, /* sys_mount */
+ [__NR_umount] sys_ni_syscall,
+ [__NR_setuid] sys_setuid,
+ [__NR_getuid] sys_getuid,
+ [__NR_stime] sys_stime,
+ [__NR_ptrace] sys_ni_syscall, /* sys_ptrace */
+ [__NR_alarm] sys_alarm,
+ [__NR_oldfstat] sys_ni_syscall,
+ [__NR_pause] sys_ni_syscall, /* sys_pause */
+ [__NR_utime] sys_ni_syscall, /* sys_utime */
+ [__NR_stty] sys_ni_syscall,
+ [__NR_gtty] sys_ni_syscall,
+ [__NR_access] sys_access,
+ [__NR_nice] sys_nice,
+ [__NR_ftime] sys_ni_syscall,
+ [__NR_sync] sys_sync,
+ [__NR_kill] sys_kill,
+ [__NR_rename] sys_rename,
+ [__NR_mkdir] sys_mkdir,
+ [__NR_rmdir] sys_rmdir,
+ [__NR_dup] sys_dup,
+ [__NR_pipe] sys_pipe,
+ [__NR_times] sys_times,
+ [__NR_prof] sys_ni_syscall,
+ [__NR_brk] sys_brk,
+ [__NR_setgid] sys_setgid,
+ [__NR_getgid] sys_getgid,
+ [__NR_signal] sys_ni_syscall, /* sys_signal */
+ [__NR_geteuid] sys_geteuid,
+ [__NR_getegid] sys_getegid,
+ [__NR_acct] sys_ni_syscall, /* sys_acct */
+ [__NR_umount2] sys_ni_syscall, /* sys_umount */
+ [__NR_lock] sys_ni_syscall,
+ [__NR_ioctl] sys_ioctl,
+ [__NR_fcntl] sys_fcntl,
+ [__NR_mpx] sys_ni_syscall,
+ [__NR_setpgid] sys_setpgid,
+ [__NR_ulimit] sys_ni_syscall,
+ [__NR_oldolduname] sys_ni_syscall,
+ [__NR_umask] sys_umask,
+ [__NR_chroot] sys_chroot,
+ [__NR_ustat] sys_ni_syscall, /* sys_ustat */
+ [__NR_dup2] sys_dup2,
+ [__NR_getppid] sys_getppid,
+ [__NR_getpgrp] sys_getpgrp,
+ [__NR_setsid] sys_setsid,
+ [__NR_sigaction] sys_ni_syscall,
+ [__NR_sgetmask] sys_sgetmask,
+ [__NR_ssetmask] sys_ssetmask,
+ [__NR_setreuid] sys_setreuid,
+ [__NR_setregid] sys_setregid,
+ [__NR_sigsuspend] sys_ni_syscall,
+ [__NR_sigpending] sys_ni_syscall,
+ [__NR_sethostname] sys_sethostname,
+ [__NR_setrlimit] sys_setrlimit,
+ [__NR_getrlimit] sys_ni_syscall,
+ [__NR_getrusage] sys_getrusage,
+ [__NR_gettimeofday] sys_gettimeofday,
+ [__NR_settimeofday] sys_settimeofday,
+ [__NR_getgroups] sys_getgroups,
+ [__NR_setgroups] sys_setgroups,
+ [__NR_select] sys_ni_syscall,
+ [__NR_symlink] sys_symlink,
+ [__NR_oldlstat] sys_ni_syscall,
+ [__NR_readlink] sys_readlink,
+ [__NR_uselib] sys_ni_syscall, /* sys_uselib */
+ [__NR_swapon] sys_ni_syscall, /* sys_swapon */
+ [__NR_reboot] sys_ni_syscall, /* sys_reboot */
+ [__NR_readdir] sys_ni_syscall,
+ [__NR_mmap] sys_mmap,
+ [__NR_munmap] sys_munmap,
+ [__NR_truncate] sys_truncate,
+ [__NR_ftruncate] sys_ftruncate,
+ [__NR_fchmod] sys_fchmod,
+ [__NR_fchown] sys_fchown,
+ [__NR_getpriority] sys_getpriority,
+ [__NR_setpriority] sys_setpriority,
+ [__NR_profil] sys_ni_syscall,
+ [__NR_statfs] sys_ni_syscall, /* sys_statfs */
+ [__NR_fstatfs] sys_ni_syscall, /* sys_fstatfs */
+ [__NR_ioperm] sys_ni_syscall,
+ [__NR_socketcall] sys_socketcall,
+ [__NR_syslog] sys_syslog,
+ [__NR_setitimer] sys_setitimer,
+ [__NR_getitimer] sys_getitimer,
+ [__NR_stat] sys_newstat,
+ [__NR_lstat] sys_newlstat,
+ [__NR_fstat] sys_newfstat,
+ [__NR_olduname] sys_ni_syscall,
+ [__NR_iopl] sys_ni_syscall,
+ [__NR_vhangup] sys_vhangup,
+ [__NR_idle] sys_ni_syscall,
+ [__NR_vm86] sys_ni_syscall,
+ [__NR_wait4] sys_wait4,
+ [__NR_swapoff] sys_ni_syscall, /* sys_swapoff */
+ [__NR_sysinfo] sys_sysinfo,
+ [__NR_ipc] sys_ni_syscall, /* sys_ipc */
+ [__NR_fsync] sys_fsync,
+ [__NR_sigreturn] sys_ni_syscall,
+ [__NR_clone] sys_ni_syscall, /* ppc_clone */
+ [__NR_setdomainname] sys_setdomainname,
+ [__NR_uname] ppc_newuname,
+ [__NR_modify_ldt] sys_ni_syscall,
+ [__NR_adjtimex] sys_adjtimex,
+ [__NR_mprotect] sys_mprotect,
+ [__NR_sigprocmask] sys_ni_syscall,
+ [__NR_create_module] sys_ni_syscall,
+ [__NR_init_module] sys_ni_syscall, /* sys_init_module */
+ [__NR_delete_module] sys_ni_syscall, /* sys_delete_module */
+ [__NR_get_kernel_syms] sys_ni_syscall,
+ [__NR_quotactl] sys_ni_syscall, /* sys_quotactl */
+ [__NR_getpgid] sys_getpgid,
+ [__NR_fchdir] sys_fchdir,
+ [__NR_bdflush] sys_bdflush,
+ [__NR_sysfs] sys_ni_syscall, /* sys_sysfs */
+ [__NR_personality] ppc64_personality,
+ [__NR_afs_syscall] sys_ni_syscall,
+ [__NR_setfsuid] sys_setfsuid,
+ [__NR_setfsgid] sys_setfsgid,
+ [__NR__llseek] sys_llseek,
+ [__NR_getdents] sys_getdents,
+ [__NR__newselect] sys_select,
+ [__NR_flock] sys_flock,
+ [__NR_msync] sys_msync,
+ [__NR_readv] sys_readv,
+ [__NR_writev] sys_writev,
+ [__NR_getsid] sys_getsid,
+ [__NR_fdatasync] sys_fdatasync,
+ [__NR__sysctl] sys_ni_syscall, /* sys_sysctl */
+ [__NR_mlock] sys_mlock,
+ [__NR_munlock] sys_munlock,
+ [__NR_mlockall] sys_mlockall,
+ [__NR_munlockall] sys_munlockall,
+ [__NR_sched_setparam] sys_sched_setparam,
+ [__NR_sched_getparam] sys_sched_getparam,
+ [__NR_sched_setscheduler] sys_sched_setscheduler,
+ [__NR_sched_getscheduler] sys_sched_getscheduler,
+ [__NR_sched_yield] sys_sched_yield,
+ [__NR_sched_get_priority_max] sys_sched_get_priority_max,
+ [__NR_sched_get_priority_min] sys_sched_get_priority_min,
+ [__NR_sched_rr_get_interval] sys_sched_rr_get_interval,
+ [__NR_nanosleep] sys_nanosleep,
+ [__NR_mremap] sys_mremap,
+ [__NR_setresuid] sys_setresuid,
+ [__NR_getresuid] sys_getresuid,
+ [__NR_query_module] sys_ni_syscall,
+ [__NR_poll] sys_poll,
+ [__NR_nfsservctl] sys_ni_syscall, /* sys_nfsservctl */
+ [__NR_setresgid] sys_setresgid,
+ [__NR_getresgid] sys_getresgid,
+ [__NR_prctl] sys_prctl,
+ [__NR_rt_sigreturn] sys_ni_syscall, /* ppc64_rt_sigreturn */
+ [__NR_rt_sigaction] sys_ni_syscall, /* sys_rt_sigaction */
+ [__NR_rt_sigprocmask] sys_ni_syscall, /* sys_rt_sigprocmask */
+ [__NR_rt_sigpending] sys_ni_syscall, /* sys_rt_sigpending */
+ [__NR_rt_sigtimedwait] sys_ni_syscall, /* sys_rt_sigtimedwait */
+ [__NR_rt_sigqueueinfo] sys_ni_syscall, /* sys_rt_sigqueueinfo */
+ [__NR_rt_sigsuspend] sys_ni_syscall, /* sys_rt_sigsuspend */
+ [__NR_pread64] sys_pread64,
+ [__NR_pwrite64] sys_pwrite64,
+ [__NR_chown] sys_chown,
+ [__NR_getcwd] sys_getcwd,
+ [__NR_capget] sys_capget,
+ [__NR_capset] sys_capset,
+ [__NR_sigaltstack] sys_ni_syscall, /* sys_sigaltstack */
+ [__NR_sendfile] sys_sendfile64,
+ [__NR_getpmsg] sys_ni_syscall,
+ [__NR_putpmsg] sys_ni_syscall,
+ [__NR_vfork] sys_ni_syscall, /* ppc_vfork */
+ [__NR_ugetrlimit] sys_getrlimit,
+ [__NR_readahead] sys_readahead,
+ [192] sys_ni_syscall,
+ [193] sys_ni_syscall,
+ [194] sys_ni_syscall,
+ [195] sys_ni_syscall,
+ [196] sys_ni_syscall,
+ [197] sys_ni_syscall,
+ [__NR_pciconfig_read] sys_ni_syscall, /* sys_pciconfig_read */
+ [__NR_pciconfig_write] sys_ni_syscall, /* sys_pciconfig_write */
+ [__NR_pciconfig_iobase] sys_ni_syscall, /* sys_pciconfig_iobase */
+ [__NR_multiplexer] sys_ni_syscall,
+ [__NR_getdents64] sys_getdents64,
+ [__NR_pivot_root] sys_pivot_root,
+ [204] sys_ni_syscall,
+ [__NR_madvise] sys_madvise,
+ [__NR_mincore] sys_mincore,
+ [__NR_gettid] sys_gettid,
+ [__NR_tkill] sys_tkill,
+ [__NR_setxattr] sys_setxattr,
+ [__NR_lsetxattr] sys_lsetxattr,
+ [__NR_fsetxattr] sys_fsetxattr,
+ [__NR_getxattr] sys_getxattr,
+ [__NR_lgetxattr] sys_lgetxattr,
+ [__NR_fgetxattr] sys_fgetxattr,
+ [__NR_listxattr] sys_listxattr,
+ [__NR_llistxattr] sys_llistxattr,
+ [__NR_flistxattr] sys_flistxattr,
+ [__NR_removexattr] sys_removexattr,
+ [__NR_lremovexattr] sys_lremovexattr,
+ [__NR_fremovexattr] sys_fremovexattr,
+ [__NR_futex] sys_futex,
+ [__NR_sched_setaffinity] sys_sched_setaffinity,
+ [__NR_sched_getaffinity] sys_sched_getaffinity,
+ [__NR_tuxcall] sys_ni_syscall,
+ [226] sys_ni_syscall,
+ [__NR_io_setup] sys_io_setup,
+ [__NR_io_destroy] sys_io_destroy,
+ [__NR_io_getevents] sys_io_getevents,
+ [__NR_io_submit] sys_io_submit,
+ [__NR_io_cancel] sys_io_cancel,
+ [__NR_set_tid_address] sys_ni_syscall, /* sys_set_tid_address */
+ [__NR_fadvise64] sys_fadvise64,
+ [__NR_exit_group] sys_ni_syscall, /* sys_exit_group */
+ [__NR_lookup_dcookie] sys_ni_syscall, /* sys_lookup_dcookie */
+ [__NR_epoll_create] sys_epoll_create,
+ [__NR_epoll_ctl] sys_epoll_ctl,
+ [__NR_epoll_wait] sys_epoll_wait,
+ [__NR_remap_file_pages] sys_remap_file_pages,
+ [__NR_timer_create] sys_timer_create,
+ [__NR_timer_settime] sys_timer_settime,
+ [__NR_timer_gettime] sys_timer_gettime,
+ [__NR_timer_getoverrun] sys_timer_getoverrun,
+ [__NR_timer_delete] sys_timer_delete,
+ [__NR_clock_settime] sys_clock_settime,
+ [__NR_clock_gettime] sys_clock_gettime,
+ [__NR_clock_getres] sys_clock_getres,
+ [__NR_clock_nanosleep] sys_clock_nanosleep,
+ [__NR_swapcontext] sys_ni_syscall, /* ppc64_swapcontext */
+ [__NR_tgkill] sys_tgkill,
+ [__NR_utimes] sys_utimes,
+ [__NR_statfs64] sys_statfs64,
+ [__NR_fstatfs64] sys_fstatfs64,
+ [254] sys_ni_syscall,
+ [__NR_rtas] ppc_rtas,
+ [256] sys_ni_syscall,
+ [257] sys_ni_syscall,
+ [258] sys_ni_syscall,
+ [__NR_mbind] sys_ni_syscall, /* sys_mbind */
+ [__NR_get_mempolicy] sys_ni_syscall, /* sys_get_mempolicy */
+ [__NR_set_mempolicy] sys_ni_syscall, /* sys_set_mempolicy */
+ [__NR_mq_open] sys_ni_syscall, /* sys_mq_open */
+ [__NR_mq_unlink] sys_ni_syscall, /* sys_mq_unlink */
+ [__NR_mq_timedsend] sys_ni_syscall, /* sys_mq_timedsend */
+ [__NR_mq_timedreceive] sys_ni_syscall, /* sys_mq_timedreceive */
+ [__NR_mq_notify] sys_ni_syscall, /* sys_mq_notify */
+ [__NR_mq_getsetattr] sys_ni_syscall, /* sys_mq_getsetattr */
+ [__NR_kexec_load] sys_ni_syscall, /* sys_kexec_load */
+ [__NR_add_key] sys_ni_syscall, /* sys_add_key */
+ [__NR_request_key] sys_ni_syscall, /* sys_request_key */
+ [__NR_keyctl] sys_ni_syscall, /* sys_keyctl */
+ [__NR_waitid] sys_ni_syscall, /* sys_waitid */
+ [__NR_ioprio_set] sys_ni_syscall, /* sys_ioprio_set */
+ [__NR_ioprio_get] sys_ni_syscall, /* sys_ioprio_get */
+ [__NR_inotify_init] sys_ni_syscall, /* sys_inotify_init */
+ [__NR_inotify_add_watch] sys_ni_syscall, /* sys_inotify_add_watch */
+ [__NR_inotify_rm_watch] sys_ni_syscall, /* sys_inotify_rm_watch */
+ [__NR_spu_run] sys_ni_syscall, /* sys_spu_run */
+ [__NR_spu_create] sys_ni_syscall, /* sys_spu_create */
+ [__NR_pselect6] sys_ni_syscall, /* sys_pselect */
+ [__NR_ppoll] sys_ni_syscall, /* sys_ppoll */
+ [__NR_unshare] sys_unshare,
+};
+
+long spu_sys_callback(struct spu_syscall_block *s)
+{
+ long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
+
+ BUILD_BUG_ON(ARRAY_SIZE(spu_syscall_table) != __NR_syscalls);
+
+ syscall = spu_syscall_table[s->nr_ret];
+
+ if (s->nr_ret >= __NR_syscalls) {
+ pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
+ return -ENOSYS;
+ }
+
+#ifdef DEBUG
+ print_symbol(KERN_DEBUG "SPU-syscall %s:", (unsigned long)syscall);
+ printk("syscall%ld(%lx, %lx, %lx, %lx, %lx, %lx)\n",
+ s->nr_ret,
+ s->parm[0], s->parm[1], s->parm[2],
+ s->parm[3], s->parm[4], s->parm[5]);
+#endif
+
+ return syscall(s->parm[0], s->parm[1], s->parm[2],
+ s->parm[3], s->parm[4], s->parm[5]);
+}
+EXPORT_SYMBOL_GPL(spu_sys_callback);
diff --git a/trunk/arch/powerpc/platforms/cell/spufs/backing_ops.c b/trunk/arch/powerpc/platforms/cell/spufs/backing_ops.c
index a5c489a53c61..f1d35ddc9df3 100644
--- a/trunk/arch/powerpc/platforms/cell/spufs/backing_ops.c
+++ b/trunk/arch/powerpc/platforms/cell/spufs/backing_ops.c
@@ -285,6 +285,49 @@ static void spu_backing_runcntl_stop(struct spu_context *ctx)
spu_backing_runcntl_write(ctx, SPU_RUNCNTL_STOP);
}
+static int spu_backing_set_mfc_query(struct spu_context * ctx, u32 mask,
+ u32 mode)
+{
+ struct spu_problem_collapsed *prob = &ctx->csa.prob;
+ int ret;
+
+ spin_lock(&ctx->csa.register_lock);
+ ret = -EAGAIN;
+ if (prob->dma_querytype_RW)
+ goto out;
+ ret = 0;
+ /* FIXME: what are the side-effects of this? */
+ prob->dma_querymask_RW = mask;
+ prob->dma_querytype_RW = mode;
+out:
+ spin_unlock(&ctx->csa.register_lock);
+
+ return ret;
+}
+
+static u32 spu_backing_read_mfc_tagstatus(struct spu_context * ctx)
+{
+ return ctx->csa.prob.dma_tagstatus_R;
+}
+
+static u32 spu_backing_get_mfc_free_elements(struct spu_context *ctx)
+{
+ return ctx->csa.prob.dma_qstatus_R;
+}
+
+static int spu_backing_send_mfc_command(struct spu_context *ctx,
+ struct mfc_dma_command *cmd)
+{
+ int ret;
+
+ spin_lock(&ctx->csa.register_lock);
+ ret = -EAGAIN;
+ /* FIXME: set up priv2->puq */
+ spin_unlock(&ctx->csa.register_lock);
+
+ return ret;
+}
+
struct spu_context_ops spu_backing_ops = {
.mbox_read = spu_backing_mbox_read,
.mbox_stat_read = spu_backing_mbox_stat_read,
@@ -305,4 +348,8 @@ struct spu_context_ops spu_backing_ops = {
.get_ls = spu_backing_get_ls,
.runcntl_write = spu_backing_runcntl_write,
.runcntl_stop = spu_backing_runcntl_stop,
+ .set_mfc_query = spu_backing_set_mfc_query,
+ .read_mfc_tagstatus = spu_backing_read_mfc_tagstatus,
+ .get_mfc_free_elements = spu_backing_get_mfc_free_elements,
+ .send_mfc_command = spu_backing_send_mfc_command,
};
diff --git a/trunk/arch/powerpc/platforms/cell/spufs/context.c b/trunk/arch/powerpc/platforms/cell/spufs/context.c
index 336f238102fd..8bb33abfad17 100644
--- a/trunk/arch/powerpc/platforms/cell/spufs/context.c
+++ b/trunk/arch/powerpc/platforms/cell/spufs/context.c
@@ -27,7 +27,7 @@
#include
#include "spufs.h"
-struct spu_context *alloc_spu_context(struct address_space *local_store)
+struct spu_context *alloc_spu_context(void)
{
struct spu_context *ctx;
ctx = kmalloc(sizeof *ctx, GFP_KERNEL);
@@ -47,10 +47,17 @@ struct spu_context *alloc_spu_context(struct address_space *local_store)
init_waitqueue_head(&ctx->ibox_wq);
init_waitqueue_head(&ctx->wbox_wq);
init_waitqueue_head(&ctx->stop_wq);
+ init_waitqueue_head(&ctx->mfc_wq);
ctx->ibox_fasync = NULL;
ctx->wbox_fasync = NULL;
+ ctx->mfc_fasync = NULL;
+ ctx->mfc = NULL;
+ ctx->tagwait = 0;
ctx->state = SPU_STATE_SAVED;
- ctx->local_store = local_store;
+ ctx->local_store = NULL;
+ ctx->cntl = NULL;
+ ctx->signal1 = NULL;
+ ctx->signal2 = NULL;
ctx->spu = NULL;
ctx->ops = &spu_backing_ops;
ctx->owner = get_task_mm(current);
@@ -68,8 +75,6 @@ void destroy_spu_context(struct kref *kref)
ctx = container_of(kref, struct spu_context, kref);
down_write(&ctx->state_sema);
spu_deactivate(ctx);
- ctx->ibox_fasync = NULL;
- ctx->wbox_fasync = NULL;
up_write(&ctx->state_sema);
spu_fini_csa(&ctx->csa);
kfree(ctx);
@@ -109,7 +114,16 @@ void spu_release(struct spu_context *ctx)
void spu_unmap_mappings(struct spu_context *ctx)
{
- unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1);
+ if (ctx->local_store)
+ unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1);
+ if (ctx->mfc)
+ unmap_mapping_range(ctx->mfc, 0, 0x4000, 1);
+ if (ctx->cntl)
+ unmap_mapping_range(ctx->cntl, 0, 0x4000, 1);
+ if (ctx->signal1)
+ unmap_mapping_range(ctx->signal1, 0, 0x4000, 1);
+ if (ctx->signal2)
+ unmap_mapping_range(ctx->signal2, 0, 0x4000, 1);
}
int spu_acquire_runnable(struct spu_context *ctx)
diff --git a/trunk/arch/powerpc/platforms/cell/spufs/file.c b/trunk/arch/powerpc/platforms/cell/spufs/file.c
index dfa649c9b956..366185e92667 100644
--- a/trunk/arch/powerpc/platforms/cell/spufs/file.c
+++ b/trunk/arch/powerpc/platforms/cell/spufs/file.c
@@ -20,6 +20,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#undef DEBUG
+
#include
#include
#include
@@ -39,8 +41,10 @@ static int
spufs_mem_open(struct inode *inode, struct file *file)
{
struct spufs_inode_info *i = SPUFS_I(inode);
- file->private_data = i->i_ctx;
- file->f_mapping = i->i_ctx->local_store;
+ struct spu_context *ctx = i->i_ctx;
+ file->private_data = ctx;
+ file->f_mapping = inode->i_mapping;
+ ctx->local_store = inode->i_mapping;
return 0;
}
@@ -84,7 +88,7 @@ spufs_mem_write(struct file *file, const char __user *buffer,
return ret;
}
-#ifdef CONFIG_SPARSEMEM
+#ifdef CONFIG_SPUFS_MMAP
static struct page *
spufs_mem_mmap_nopage(struct vm_area_struct *vma,
unsigned long address, int *type)
@@ -136,11 +140,113 @@ static struct file_operations spufs_mem_fops = {
.read = spufs_mem_read,
.write = spufs_mem_write,
.llseek = generic_file_llseek,
-#ifdef CONFIG_SPARSEMEM
+#ifdef CONFIG_SPUFS_MMAP
.mmap = spufs_mem_mmap,
#endif
};
+#ifdef CONFIG_SPUFS_MMAP
+static struct page *spufs_ps_nopage(struct vm_area_struct *vma,
+ unsigned long address,
+ int *type, unsigned long ps_offs)
+{
+ struct page *page = NOPAGE_SIGBUS;
+ int fault_type = VM_FAULT_SIGBUS;
+ struct spu_context *ctx = vma->vm_file->private_data;
+ unsigned long offset = address - vma->vm_start;
+ unsigned long area;
+ int ret;
+
+ offset += vma->vm_pgoff << PAGE_SHIFT;
+ if (offset >= 0x4000)
+ goto out;
+
+ ret = spu_acquire_runnable(ctx);
+ if (ret)
+ goto out;
+
+ area = ctx->spu->problem_phys + ps_offs;
+ page = pfn_to_page((area + offset) >> PAGE_SHIFT);
+ fault_type = VM_FAULT_MINOR;
+ page_cache_get(page);
+
+ spu_release(ctx);
+
+ out:
+ if (type)
+ *type = fault_type;
+
+ return page;
+}
+
+static struct page *spufs_cntl_mmap_nopage(struct vm_area_struct *vma,
+ unsigned long address, int *type)
+{
+ return spufs_ps_nopage(vma, address, type, 0x4000);
+}
+
+static struct vm_operations_struct spufs_cntl_mmap_vmops = {
+ .nopage = spufs_cntl_mmap_nopage,
+};
+
+/*
+ * mmap support for problem state control area [0x4000 - 0x4fff].
+ * Mapping this area requires that the application have CAP_SYS_RAWIO,
+ * as these registers require special care when read/writing.
+ */
+static int spufs_cntl_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ if (!(vma->vm_flags & VM_SHARED))
+ return -EINVAL;
+
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+
+ vma->vm_flags |= VM_RESERVED;
+ vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
+ | _PAGE_NO_CACHE);
+
+ vma->vm_ops = &spufs_cntl_mmap_vmops;
+ return 0;
+}
+#endif
+
+static int spufs_cntl_open(struct inode *inode, struct file *file)
+{
+ struct spufs_inode_info *i = SPUFS_I(inode);
+ struct spu_context *ctx = i->i_ctx;
+
+ file->private_data = ctx;
+ file->f_mapping = inode->i_mapping;
+ ctx->cntl = inode->i_mapping;
+ return 0;
+}
+
+static ssize_t
+spufs_cntl_read(struct file *file, char __user *buffer,
+ size_t size, loff_t *pos)
+{
+ /* FIXME: read from spu status */
+ return -EINVAL;
+}
+
+static ssize_t
+spufs_cntl_write(struct file *file, const char __user *buffer,
+ size_t size, loff_t *pos)
+{
+ /* FIXME: write to runctl bit */
+ return -EINVAL;
+}
+
+static struct file_operations spufs_cntl_fops = {
+ .open = spufs_cntl_open,
+ .read = spufs_cntl_read,
+ .write = spufs_cntl_write,
+#ifdef CONFIG_SPUFS_MMAP
+ .mmap = spufs_cntl_mmap,
+#endif
+};
+
static int
spufs_regs_open(struct inode *inode, struct file *file)
{
@@ -501,6 +607,16 @@ static struct file_operations spufs_wbox_stat_fops = {
.read = spufs_wbox_stat_read,
};
+static int spufs_signal1_open(struct inode *inode, struct file *file)
+{
+ struct spufs_inode_info *i = SPUFS_I(inode);
+ struct spu_context *ctx = i->i_ctx;
+ file->private_data = ctx;
+ file->f_mapping = inode->i_mapping;
+ ctx->signal1 = inode->i_mapping;
+ return nonseekable_open(inode, file);
+}
+
static ssize_t spufs_signal1_read(struct file *file, char __user *buf,
size_t len, loff_t *pos)
{
@@ -541,12 +657,50 @@ static ssize_t spufs_signal1_write(struct file *file, const char __user *buf,
return 4;
}
+#ifdef CONFIG_SPUFS_MMAP
+static struct page *spufs_signal1_mmap_nopage(struct vm_area_struct *vma,
+ unsigned long address, int *type)
+{
+ return spufs_ps_nopage(vma, address, type, 0x14000);
+}
+
+static struct vm_operations_struct spufs_signal1_mmap_vmops = {
+ .nopage = spufs_signal1_mmap_nopage,
+};
+
+static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ if (!(vma->vm_flags & VM_SHARED))
+ return -EINVAL;
+
+ vma->vm_flags |= VM_RESERVED;
+ vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
+ | _PAGE_NO_CACHE);
+
+ vma->vm_ops = &spufs_signal1_mmap_vmops;
+ return 0;
+}
+#endif
+
static struct file_operations spufs_signal1_fops = {
- .open = spufs_pipe_open,
+ .open = spufs_signal1_open,
.read = spufs_signal1_read,
.write = spufs_signal1_write,
+#ifdef CONFIG_SPUFS_MMAP
+ .mmap = spufs_signal1_mmap,
+#endif
};
+static int spufs_signal2_open(struct inode *inode, struct file *file)
+{
+ struct spufs_inode_info *i = SPUFS_I(inode);
+ struct spu_context *ctx = i->i_ctx;
+ file->private_data = ctx;
+ file->f_mapping = inode->i_mapping;
+ ctx->signal2 = inode->i_mapping;
+ return nonseekable_open(inode, file);
+}
+
static ssize_t spufs_signal2_read(struct file *file, char __user *buf,
size_t len, loff_t *pos)
{
@@ -589,10 +743,39 @@ static ssize_t spufs_signal2_write(struct file *file, const char __user *buf,
return 4;
}
+#ifdef CONFIG_SPUFS_MMAP
+static struct page *spufs_signal2_mmap_nopage(struct vm_area_struct *vma,
+ unsigned long address, int *type)
+{
+ return spufs_ps_nopage(vma, address, type, 0x1c000);
+}
+
+static struct vm_operations_struct spufs_signal2_mmap_vmops = {
+ .nopage = spufs_signal2_mmap_nopage,
+};
+
+static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ if (!(vma->vm_flags & VM_SHARED))
+ return -EINVAL;
+
+ /* FIXME: */
+ vma->vm_flags |= VM_RESERVED;
+ vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
+ | _PAGE_NO_CACHE);
+
+ vma->vm_ops = &spufs_signal2_mmap_vmops;
+ return 0;
+}
+#endif
+
static struct file_operations spufs_signal2_fops = {
- .open = spufs_pipe_open,
+ .open = spufs_signal2_open,
.read = spufs_signal2_read,
.write = spufs_signal2_write,
+#ifdef CONFIG_SPUFS_MMAP
+ .mmap = spufs_signal2_mmap,
+#endif
};
static void spufs_signal1_type_set(void *data, u64 val)
@@ -641,6 +824,332 @@ static u64 spufs_signal2_type_get(void *data)
DEFINE_SIMPLE_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get,
spufs_signal2_type_set, "%llu");
+#ifdef CONFIG_SPUFS_MMAP
+static struct page *spufs_mfc_mmap_nopage(struct vm_area_struct *vma,
+ unsigned long address, int *type)
+{
+ return spufs_ps_nopage(vma, address, type, 0x3000);
+}
+
+static struct vm_operations_struct spufs_mfc_mmap_vmops = {
+ .nopage = spufs_mfc_mmap_nopage,
+};
+
+/*
+ * mmap support for problem state MFC DMA area [0x0000 - 0x0fff].
+ * Mapping this area requires that the application have CAP_SYS_RAWIO,
+ * as these registers require special care when read/writing.
+ */
+static int spufs_mfc_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ if (!(vma->vm_flags & VM_SHARED))
+ return -EINVAL;
+
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+
+ vma->vm_flags |= VM_RESERVED;
+ vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
+ | _PAGE_NO_CACHE);
+
+ vma->vm_ops = &spufs_mfc_mmap_vmops;
+ return 0;
+}
+#endif
+
+static int spufs_mfc_open(struct inode *inode, struct file *file)
+{
+ struct spufs_inode_info *i = SPUFS_I(inode);
+ struct spu_context *ctx = i->i_ctx;
+
+ /* we don't want to deal with DMA into other processes */
+ if (ctx->owner != current->mm)
+ return -EINVAL;
+
+ if (atomic_read(&inode->i_count) != 1)
+ return -EBUSY;
+
+ file->private_data = ctx;
+ return nonseekable_open(inode, file);
+}
+
+/* interrupt-level mfc callback function. */
+void spufs_mfc_callback(struct spu *spu)
+{
+ struct spu_context *ctx = spu->ctx;
+
+ wake_up_all(&ctx->mfc_wq);
+
+ pr_debug("%s %s\n", __FUNCTION__, spu->name);
+ if (ctx->mfc_fasync) {
+ u32 free_elements, tagstatus;
+ unsigned int mask;
+
+ /* no need for spu_acquire in interrupt context */
+ free_elements = ctx->ops->get_mfc_free_elements(ctx);
+ tagstatus = ctx->ops->read_mfc_tagstatus(ctx);
+
+ mask = 0;
+ if (free_elements & 0xffff)
+ mask |= POLLOUT;
+ if (tagstatus & ctx->tagwait)
+ mask |= POLLIN;
+
+ kill_fasync(&ctx->mfc_fasync, SIGIO, mask);
+ }
+}
+
+static int spufs_read_mfc_tagstatus(struct spu_context *ctx, u32 *status)
+{
+ /* See if there is one tag group is complete */
+ /* FIXME we need locking around tagwait */
+ *status = ctx->ops->read_mfc_tagstatus(ctx) & ctx->tagwait;
+ ctx->tagwait &= ~*status;
+ if (*status)
+ return 1;
+
+ /* enable interrupt waiting for any tag group,
+ may silently fail if interrupts are already enabled */
+ ctx->ops->set_mfc_query(ctx, ctx->tagwait, 1);
+ return 0;
+}
+
+static ssize_t spufs_mfc_read(struct file *file, char __user *buffer,
+ size_t size, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ int ret = -EINVAL;
+ u32 status;
+
+ if (size != 4)
+ goto out;
+
+ spu_acquire(ctx);
+ if (file->f_flags & O_NONBLOCK) {
+ status = ctx->ops->read_mfc_tagstatus(ctx);
+ if (!(status & ctx->tagwait))
+ ret = -EAGAIN;
+ else
+ ctx->tagwait &= ~status;
+ } else {
+ ret = spufs_wait(ctx->mfc_wq,
+ spufs_read_mfc_tagstatus(ctx, &status));
+ }
+ spu_release(ctx);
+
+ if (ret)
+ goto out;
+
+ ret = 4;
+ if (copy_to_user(buffer, &status, 4))
+ ret = -EFAULT;
+
+out:
+ return ret;
+}
+
+static int spufs_check_valid_dma(struct mfc_dma_command *cmd)
+{
+ pr_debug("queueing DMA %x %lx %x %x %x\n", cmd->lsa,
+ cmd->ea, cmd->size, cmd->tag, cmd->cmd);
+
+ switch (cmd->cmd) {
+ case MFC_PUT_CMD:
+ case MFC_PUTF_CMD:
+ case MFC_PUTB_CMD:
+ case MFC_GET_CMD:
+ case MFC_GETF_CMD:
+ case MFC_GETB_CMD:
+ break;
+ default:
+ pr_debug("invalid DMA opcode %x\n", cmd->cmd);
+ return -EIO;
+ }
+
+ if ((cmd->lsa & 0xf) != (cmd->ea &0xf)) {
+ pr_debug("invalid DMA alignment, ea %lx lsa %x\n",
+ cmd->ea, cmd->lsa);
+ return -EIO;
+ }
+
+ switch (cmd->size & 0xf) {
+ case 1:
+ break;
+ case 2:
+ if (cmd->lsa & 1)
+ goto error;
+ break;
+ case 4:
+ if (cmd->lsa & 3)
+ goto error;
+ break;
+ case 8:
+ if (cmd->lsa & 7)
+ goto error;
+ break;
+ case 0:
+ if (cmd->lsa & 15)
+ goto error;
+ break;
+ error:
+ default:
+ pr_debug("invalid DMA alignment %x for size %x\n",
+ cmd->lsa & 0xf, cmd->size);
+ return -EIO;
+ }
+
+ if (cmd->size > 16 * 1024) {
+ pr_debug("invalid DMA size %x\n", cmd->size);
+ return -EIO;
+ }
+
+ if (cmd->tag & 0xfff0) {
+ /* we reserve the higher tag numbers for kernel use */
+ pr_debug("invalid DMA tag\n");
+ return -EIO;
+ }
+
+ if (cmd->class) {
+ /* not supported in this version */
+ pr_debug("invalid DMA class\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int spu_send_mfc_command(struct spu_context *ctx,
+ struct mfc_dma_command cmd,
+ int *error)
+{
+ *error = ctx->ops->send_mfc_command(ctx, &cmd);
+ if (*error == -EAGAIN) {
+ /* wait for any tag group to complete
+ so we have space for the new command */
+ ctx->ops->set_mfc_query(ctx, ctx->tagwait, 1);
+ /* try again, because the queue might be
+ empty again */
+ *error = ctx->ops->send_mfc_command(ctx, &cmd);
+ if (*error == -EAGAIN)
+ return 0;
+ }
+ return 1;
+}
+
+static ssize_t spufs_mfc_write(struct file *file, const char __user *buffer,
+ size_t size, loff_t *pos)
+{
+ struct spu_context *ctx = file->private_data;
+ struct mfc_dma_command cmd;
+ int ret = -EINVAL;
+
+ if (size != sizeof cmd)
+ goto out;
+
+ ret = -EFAULT;
+ if (copy_from_user(&cmd, buffer, sizeof cmd))
+ goto out;
+
+ ret = spufs_check_valid_dma(&cmd);
+ if (ret)
+ goto out;
+
+ spu_acquire_runnable(ctx);
+ if (file->f_flags & O_NONBLOCK) {
+ ret = ctx->ops->send_mfc_command(ctx, &cmd);
+ } else {
+ int status;
+ ret = spufs_wait(ctx->mfc_wq,
+ spu_send_mfc_command(ctx, cmd, &status));
+ if (status)
+ ret = status;
+ }
+ spu_release(ctx);
+
+ if (ret)
+ goto out;
+
+ ctx->tagwait |= 1 << cmd.tag;
+
+out:
+ return ret;
+}
+
+static unsigned int spufs_mfc_poll(struct file *file,poll_table *wait)
+{
+ struct spu_context *ctx = file->private_data;
+ u32 free_elements, tagstatus;
+ unsigned int mask;
+
+ spu_acquire(ctx);
+ ctx->ops->set_mfc_query(ctx, ctx->tagwait, 2);
+ free_elements = ctx->ops->get_mfc_free_elements(ctx);
+ tagstatus = ctx->ops->read_mfc_tagstatus(ctx);
+ spu_release(ctx);
+
+ poll_wait(file, &ctx->mfc_wq, wait);
+
+ mask = 0;
+ if (free_elements & 0xffff)
+ mask |= POLLOUT | POLLWRNORM;
+ if (tagstatus & ctx->tagwait)
+ mask |= POLLIN | POLLRDNORM;
+
+ pr_debug("%s: free %d tagstatus %d tagwait %d\n", __FUNCTION__,
+ free_elements, tagstatus, ctx->tagwait);
+
+ return mask;
+}
+
+static int spufs_mfc_flush(struct file *file)
+{
+ struct spu_context *ctx = file->private_data;
+ int ret;
+
+ spu_acquire(ctx);
+#if 0
+/* this currently hangs */
+ ret = spufs_wait(ctx->mfc_wq,
+ ctx->ops->set_mfc_query(ctx, ctx->tagwait, 2));
+ if (ret)
+ goto out;
+ ret = spufs_wait(ctx->mfc_wq,
+ ctx->ops->read_mfc_tagstatus(ctx) == ctx->tagwait);
+out:
+#else
+ ret = 0;
+#endif
+ spu_release(ctx);
+
+ return ret;
+}
+
+static int spufs_mfc_fsync(struct file *file, struct dentry *dentry,
+ int datasync)
+{
+ return spufs_mfc_flush(file);
+}
+
+static int spufs_mfc_fasync(int fd, struct file *file, int on)
+{
+ struct spu_context *ctx = file->private_data;
+
+ return fasync_helper(fd, file, on, &ctx->mfc_fasync);
+}
+
+static struct file_operations spufs_mfc_fops = {
+ .open = spufs_mfc_open,
+ .read = spufs_mfc_read,
+ .write = spufs_mfc_write,
+ .poll = spufs_mfc_poll,
+ .flush = spufs_mfc_flush,
+ .fsync = spufs_mfc_fsync,
+ .fasync = spufs_mfc_fasync,
+#ifdef CONFIG_SPUFS_MMAP
+ .mmap = spufs_mfc_mmap,
+#endif
+};
+
static void spufs_npc_set(void *data, u64 val)
{
struct spu_context *ctx = data;
@@ -783,6 +1292,8 @@ struct tree_descr spufs_dir_contents[] = {
{ "signal2", &spufs_signal2_fops, 0666, },
{ "signal1_type", &spufs_signal1_type, 0666, },
{ "signal2_type", &spufs_signal2_type, 0666, },
+ { "mfc", &spufs_mfc_fops, 0666, },
+ { "cntl", &spufs_cntl_fops, 0666, },
{ "npc", &spufs_npc_ops, 0666, },
{ "fpcr", &spufs_fpcr_fops, 0666, },
{ "decr", &spufs_decr_ops, 0666, },
diff --git a/trunk/arch/powerpc/platforms/cell/spufs/hw_ops.c b/trunk/arch/powerpc/platforms/cell/spufs/hw_ops.c
index 5445719bff79..a13a8b5a014d 100644
--- a/trunk/arch/powerpc/platforms/cell/spufs/hw_ops.c
+++ b/trunk/arch/powerpc/platforms/cell/spufs/hw_ops.c
@@ -232,6 +232,59 @@ static void spu_hw_runcntl_stop(struct spu_context *ctx)
spin_unlock_irq(&ctx->spu->register_lock);
}
+static int spu_hw_set_mfc_query(struct spu_context * ctx, u32 mask, u32 mode)
+{
+ struct spu_problem *prob = ctx->spu->problem;
+ int ret;
+
+ spin_lock_irq(&ctx->spu->register_lock);
+ ret = -EAGAIN;
+ if (in_be32(&prob->dma_querytype_RW))
+ goto out;
+ ret = 0;
+ out_be32(&prob->dma_querymask_RW, mask);
+ out_be32(&prob->dma_querytype_RW, mode);
+out:
+ spin_unlock_irq(&ctx->spu->register_lock);
+ return ret;
+}
+
+static u32 spu_hw_read_mfc_tagstatus(struct spu_context * ctx)
+{
+ return in_be32(&ctx->spu->problem->dma_tagstatus_R);
+}
+
+static u32 spu_hw_get_mfc_free_elements(struct spu_context *ctx)
+{
+ return in_be32(&ctx->spu->problem->dma_qstatus_R);
+}
+
+static int spu_hw_send_mfc_command(struct spu_context *ctx,
+ struct mfc_dma_command *cmd)
+{
+ u32 status;
+ struct spu_problem *prob = ctx->spu->problem;
+
+ spin_lock_irq(&ctx->spu->register_lock);
+ out_be32(&prob->mfc_lsa_W, cmd->lsa);
+ out_be64(&prob->mfc_ea_W, cmd->ea);
+ out_be32(&prob->mfc_union_W.by32.mfc_size_tag32,
+ cmd->size << 16 | cmd->tag);
+ out_be32(&prob->mfc_union_W.by32.mfc_class_cmd32,
+ cmd->class << 16 | cmd->cmd);
+ status = in_be32(&prob->mfc_union_W.by32.mfc_class_cmd32);
+ spin_unlock_irq(&ctx->spu->register_lock);
+
+ switch (status & 0xffff) {
+ case 0:
+ return 0;
+ case 2:
+ return -EAGAIN;
+ default:
+ return -EINVAL;
+ }
+}
+
struct spu_context_ops spu_hw_ops = {
.mbox_read = spu_hw_mbox_read,
.mbox_stat_read = spu_hw_mbox_stat_read,
@@ -252,4 +305,8 @@ struct spu_context_ops spu_hw_ops = {
.get_ls = spu_hw_get_ls,
.runcntl_write = spu_hw_runcntl_write,
.runcntl_stop = spu_hw_runcntl_stop,
+ .set_mfc_query = spu_hw_set_mfc_query,
+ .read_mfc_tagstatus = spu_hw_read_mfc_tagstatus,
+ .get_mfc_free_elements = spu_hw_get_mfc_free_elements,
+ .send_mfc_command = spu_hw_send_mfc_command,
};
diff --git a/trunk/arch/powerpc/platforms/cell/spufs/inode.c b/trunk/arch/powerpc/platforms/cell/spufs/inode.c
index 5be40aa483fd..d9554199afa7 100644
--- a/trunk/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/trunk/arch/powerpc/platforms/cell/spufs/inode.c
@@ -241,7 +241,7 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
inode->i_gid = dir->i_gid;
inode->i_mode &= S_ISGID;
}
- ctx = alloc_spu_context(inode->i_mapping);
+ ctx = alloc_spu_context();
SPUFS_I(inode)->i_ctx = ctx;
if (!ctx)
goto out_iput;
@@ -442,7 +442,7 @@ static struct file_system_type spufs_type = {
.kill_sb = kill_litter_super,
};
-static int spufs_init(void)
+static int __init spufs_init(void)
{
int ret;
ret = -ENOMEM;
@@ -472,7 +472,7 @@ static int spufs_init(void)
}
module_init(spufs_init);
-static void spufs_exit(void)
+static void __exit spufs_exit(void)
{
spu_sched_exit();
unregister_spu_syscalls(&spufs_calls);
diff --git a/trunk/arch/powerpc/platforms/cell/spufs/run.c b/trunk/arch/powerpc/platforms/cell/spufs/run.c
index 18ea8866c61a..c04e078c0fe5 100644
--- a/trunk/arch/powerpc/platforms/cell/spufs/run.c
+++ b/trunk/arch/powerpc/platforms/cell/spufs/run.c
@@ -76,6 +76,90 @@ static inline int spu_reacquire_runnable(struct spu_context *ctx, u32 *npc,
return 0;
}
+/*
+ * SPU syscall restarting is tricky because we violate the basic
+ * assumption that the signal handler is running on the interrupted
+ * thread. Here instead, the handler runs on PowerPC user space code,
+ * while the syscall was called from the SPU.
+ * This means we can only do a very rough approximation of POSIX
+ * signal semantics.
+ */
+int spu_handle_restartsys(struct spu_context *ctx, long *spu_ret,
+ unsigned int *npc)
+{
+ int ret;
+
+ switch (*spu_ret) {
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
+ /*
+ * Enter the regular syscall restarting for
+ * sys_spu_run, then restart the SPU syscall
+ * callback.
+ */
+ *npc -= 8;
+ ret = -ERESTARTSYS;
+ break;
+ case -ERESTARTNOHAND:
+ case -ERESTART_RESTARTBLOCK:
+ /*
+ * Restart block is too hard for now, just return -EINTR
+ * to the SPU.
+ * ERESTARTNOHAND comes from sys_pause, we also return
+ * -EINTR from there.
+ * Assume that we need to be restarted ourselves though.
+ */
+ *spu_ret = -EINTR;
+ ret = -ERESTARTSYS;
+ break;
+ default:
+ printk(KERN_WARNING "%s: unexpected return code %ld\n",
+ __FUNCTION__, *spu_ret);
+ ret = 0;
+ }
+ return ret;
+}
+
+int spu_process_callback(struct spu_context *ctx)
+{
+ struct spu_syscall_block s;
+ u32 ls_pointer, npc;
+ char *ls;
+ long spu_ret;
+ int ret;
+
+ /* get syscall block from local store */
+ npc = ctx->ops->npc_read(ctx);
+ ls = ctx->ops->get_ls(ctx);
+ ls_pointer = *(u32*)(ls + npc);
+ if (ls_pointer > (LS_SIZE - sizeof(s)))
+ return -EFAULT;
+ memcpy(&s, ls + ls_pointer, sizeof (s));
+
+ /* do actual syscall without pinning the spu */
+ ret = 0;
+ spu_ret = -ENOSYS;
+ npc += 4;
+
+ if (s.nr_ret < __NR_syscalls) {
+ spu_release(ctx);
+ /* do actual system call from here */
+ spu_ret = spu_sys_callback(&s);
+ if (spu_ret <= -ERESTARTSYS) {
+ ret = spu_handle_restartsys(ctx, &spu_ret, &npc);
+ }
+ spu_acquire(ctx);
+ if (ret == -ERESTARTSYS)
+ return ret;
+ }
+
+ /* write result, jump over indirect pointer */
+ memcpy(ls + ls_pointer, &spu_ret, sizeof (spu_ret));
+ ctx->ops->npc_write(ctx, npc);
+ ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
+ return ret;
+}
+
static inline int spu_process_events(struct spu_context *ctx)
{
struct spu *spu = ctx->spu;
@@ -107,6 +191,13 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx,
ret = spufs_wait(ctx->stop_wq, spu_stopped(ctx, status));
if (unlikely(ret))
break;
+ if ((*status & SPU_STATUS_STOPPED_BY_STOP) &&
+ (*status >> SPU_STOP_STATUS_SHIFT == 0x2104)) {
+ ret = spu_process_callback(ctx);
+ if (ret)
+ break;
+ *status &= ~SPU_STATUS_STOPPED_BY_STOP;
+ }
if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) {
ret = spu_reacquire_runnable(ctx, npc, status);
if (ret)
diff --git a/trunk/arch/powerpc/platforms/cell/spufs/sched.c b/trunk/arch/powerpc/platforms/cell/spufs/sched.c
index 963182fbd1aa..bf652cd77000 100644
--- a/trunk/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/trunk/arch/powerpc/platforms/cell/spufs/sched.c
@@ -180,6 +180,7 @@ static inline void bind_context(struct spu *spu, struct spu_context *ctx)
spu->ibox_callback = spufs_ibox_callback;
spu->wbox_callback = spufs_wbox_callback;
spu->stop_callback = spufs_stop_callback;
+ spu->mfc_callback = spufs_mfc_callback;
mb();
spu_unmap_mappings(ctx);
spu_restore(&ctx->csa, spu);
@@ -197,6 +198,7 @@ static inline void unbind_context(struct spu *spu, struct spu_context *ctx)
spu->ibox_callback = NULL;
spu->wbox_callback = NULL;
spu->stop_callback = NULL;
+ spu->mfc_callback = NULL;
spu->mm = NULL;
spu->pid = 0;
spu->prio = MAX_PRIO;
diff --git a/trunk/arch/powerpc/platforms/cell/spufs/spufs.h b/trunk/arch/powerpc/platforms/cell/spufs/spufs.h
index db2601f0abd5..4485738e2102 100644
--- a/trunk/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/trunk/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -43,7 +43,11 @@ struct spu_context {
struct spu *spu; /* pointer to a physical SPU */
struct spu_state csa; /* SPU context save area. */
spinlock_t mmio_lock; /* protects mmio access */
- struct address_space *local_store;/* local store backing store */
+ struct address_space *local_store; /* local store mapping. */
+ struct address_space *mfc; /* 'mfc' area mappings. */
+ struct address_space *cntl; /* 'control' area mappings. */
+ struct address_space *signal1; /* 'signal1' area mappings. */
+ struct address_space *signal2; /* 'signal2' area mappings. */
enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state;
struct rw_semaphore state_sema;
@@ -55,13 +59,27 @@ struct spu_context {
wait_queue_head_t ibox_wq;
wait_queue_head_t wbox_wq;
wait_queue_head_t stop_wq;
+ wait_queue_head_t mfc_wq;
struct fasync_struct *ibox_fasync;
struct fasync_struct *wbox_fasync;
+ struct fasync_struct *mfc_fasync;
+ u32 tagwait;
struct spu_context_ops *ops;
struct work_struct reap_work;
u64 flags;
};
+struct mfc_dma_command {
+ int32_t pad; /* reserved */
+ uint32_t lsa; /* local storage address */
+ uint64_t ea; /* effective address */
+ uint16_t size; /* transfer size */
+ uint16_t tag; /* command tag */
+ uint16_t class; /* class ID */
+ uint16_t cmd; /* command opcode */
+};
+
+
/* SPU context query/set operations. */
struct spu_context_ops {
int (*mbox_read) (struct spu_context * ctx, u32 * data);
@@ -84,6 +102,11 @@ struct spu_context_ops {
char*(*get_ls) (struct spu_context * ctx);
void (*runcntl_write) (struct spu_context * ctx, u32 data);
void (*runcntl_stop) (struct spu_context * ctx);
+ int (*set_mfc_query)(struct spu_context * ctx, u32 mask, u32 mode);
+ u32 (*read_mfc_tagstatus)(struct spu_context * ctx);
+ u32 (*get_mfc_free_elements)(struct spu_context *ctx);
+ int (*send_mfc_command)(struct spu_context *ctx,
+ struct mfc_dma_command *cmd);
};
extern struct spu_context_ops spu_hw_ops;
@@ -106,7 +129,7 @@ long spufs_create_thread(struct nameidata *nd,
extern struct file_operations spufs_context_fops;
/* context management */
-struct spu_context * alloc_spu_context(struct address_space *local_store);
+struct spu_context * alloc_spu_context(void);
void destroy_spu_context(struct kref *kref);
struct spu_context * get_spu_context(struct spu_context *ctx);
int put_spu_context(struct spu_context *ctx);
@@ -159,5 +182,6 @@ size_t spu_ibox_read(struct spu_context *ctx, u32 *data);
void spufs_ibox_callback(struct spu *spu);
void spufs_wbox_callback(struct spu *spu);
void spufs_stop_callback(struct spu *spu);
+void spufs_mfc_callback(struct spu *spu);
#endif
diff --git a/trunk/arch/powerpc/platforms/cell/spufs/switch.c b/trunk/arch/powerpc/platforms/cell/spufs/switch.c
index 212db28531fa..97898d5d34e5 100644
--- a/trunk/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/trunk/arch/powerpc/platforms/cell/spufs/switch.c
@@ -2145,7 +2145,8 @@ static void init_priv1(struct spu_state *csa)
csa->priv1.int_mask_class1_RW = CLASS1_ENABLE_SEGMENT_FAULT_INTR |
CLASS1_ENABLE_STORAGE_FAULT_INTR;
csa->priv1.int_mask_class2_RW = CLASS2_ENABLE_SPU_STOP_INTR |
- CLASS2_ENABLE_SPU_HALT_INTR;
+ CLASS2_ENABLE_SPU_HALT_INTR |
+ CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR;
}
static void init_priv2(struct spu_state *csa)
diff --git a/trunk/arch/powerpc/platforms/chrp/chrp.h b/trunk/arch/powerpc/platforms/chrp/chrp.h
index 814f54742e0f..63f0aee4c158 100644
--- a/trunk/arch/powerpc/platforms/chrp/chrp.h
+++ b/trunk/arch/powerpc/platforms/chrp/chrp.h
@@ -8,4 +8,4 @@ extern int chrp_set_rtc_time(struct rtc_time *);
extern long chrp_time_init(void);
extern void chrp_find_bridges(void);
-extern void chrp_event_scan(void);
+extern void chrp_event_scan(unsigned long);
diff --git a/trunk/arch/powerpc/platforms/chrp/setup.c b/trunk/arch/powerpc/platforms/chrp/setup.c
index 8bf4307e323d..23a201718704 100644
--- a/trunk/arch/powerpc/platforms/chrp/setup.c
+++ b/trunk/arch/powerpc/platforms/chrp/setup.c
@@ -35,6 +35,7 @@
#include
#include
#include
+#include
#include
#include
@@ -61,6 +62,10 @@ EXPORT_SYMBOL(_chrp_type);
struct mpic *chrp_mpic;
+/* Used for doing CHRP event-scans */
+DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
+unsigned long event_scan_interval;
+
/*
* XXX this should be in xmon.h, but putting it there means xmon.h
* has to include (to get irqreturn_t), which
@@ -229,8 +234,6 @@ void __init chrp_setup_arch(void)
{
struct device_node *root = find_path_device ("/");
char *machine = NULL;
- struct device_node *device;
- unsigned int *p = NULL;
/* init to some ~sane value until calibrate_delay() runs */
loops_per_jiffy = 50000000/HZ;
@@ -287,23 +290,12 @@ void __init chrp_setup_arch(void)
*/
sio_init();
- /* Get the event scan rate for the rtas so we know how
- * often it expects a heartbeat. -- Cort
- */
- device = find_devices("rtas");
- if (device)
- p = (unsigned int *) get_property
- (device, "rtas-event-scan-rate", NULL);
- if (p && *p) {
- ppc_md.heartbeat = chrp_event_scan;
- ppc_md.heartbeat_reset = HZ / (*p * 30) - 1;
- ppc_md.heartbeat_count = 1;
- printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
- *p, ppc_md.heartbeat_reset);
- }
-
pci_create_OF_bus_map();
+#ifdef CONFIG_SMP
+ smp_ops = &chrp_smp_ops;
+#endif /* CONFIG_SMP */
+
/*
* Print the banner, then scroll down so boot progress
* can be printed. -- Cort
@@ -312,7 +304,7 @@ void __init chrp_setup_arch(void)
}
void
-chrp_event_scan(void)
+chrp_event_scan(unsigned long unused)
{
unsigned char log[1024];
int ret = 0;
@@ -320,7 +312,8 @@ chrp_event_scan(void)
/* XXX: we should loop until the hardware says no more error logs -- Cort */
rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0,
__pa(log), 1024);
- ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
+ mod_timer(&__get_cpu_var(heartbeat_timer),
+ jiffies + event_scan_interval);
}
/*
@@ -465,6 +458,9 @@ void __init chrp_init_IRQ(void)
void __init
chrp_init2(void)
{
+ struct device_node *device;
+ unsigned int *p = NULL;
+
#ifdef CONFIG_NVRAM
chrp_nvram_init();
#endif
@@ -476,12 +472,53 @@ chrp_init2(void)
request_region(0x80,0x10,"dma page reg");
request_region(0xc0,0x20,"dma2");
+ /* Get the event scan rate for the rtas so we know how
+ * often it expects a heartbeat. -- Cort
+ */
+ device = find_devices("rtas");
+ if (device)
+ p = (unsigned int *) get_property
+ (device, "rtas-event-scan-rate", NULL);
+ if (p && *p) {
+ /*
+ * Arrange to call chrp_event_scan at least *p times
+ * per minute. We use 59 rather than 60 here so that
+ * the rate will be slightly higher than the minimum.
+ * This all assumes we don't do hotplug CPU on any
+ * machine that needs the event scans done.
+ */
+ unsigned long interval, offset;
+ int cpu, ncpus;
+ struct timer_list *timer;
+
+ interval = HZ * 59 / *p;
+ offset = HZ;
+ ncpus = num_online_cpus();
+ event_scan_interval = ncpus * interval;
+ for (cpu = 0; cpu < ncpus; ++cpu) {
+ timer = &per_cpu(heartbeat_timer, cpu);
+ setup_timer(timer, chrp_event_scan, 0);
+ timer->expires = jiffies + offset;
+ add_timer_on(timer, cpu);
+ offset += interval;
+ }
+ printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
+ *p, interval);
+ }
+
if (ppc_md.progress)
ppc_md.progress(" Have fun! ", 0x7777);
}
-void __init chrp_init(void)
+static int __init chrp_probe(void)
{
+ char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "device_type", NULL);
+ if (dtype == NULL)
+ return 0;
+ if (strcmp(dtype, "chrp"))
+ return 0;
+
ISA_DMA_THRESHOLD = ~0L;
DMA_MODE_READ = 0x44;
DMA_MODE_WRITE = 0x48;
diff --git a/trunk/arch/powerpc/platforms/iseries/setup.c b/trunk/arch/powerpc/platforms/iseries/setup.c
index fa4550611c11..6ce8a404ba6b 100644
--- a/trunk/arch/powerpc/platforms/iseries/setup.c
+++ b/trunk/arch/powerpc/platforms/iseries/setup.c
@@ -675,18 +675,20 @@ static void iseries_dedicated_idle(void)
void __init iSeries_init_IRQ(void) { }
#endif
-static int __init iseries_probe(int platform)
+static int __init iseries_probe(void)
{
- if (PLATFORM_ISERIES_LPAR != platform)
+ unsigned long root = of_get_flat_dt_root();
+ if (!of_flat_dt_is_compatible(root, "IBM,iSeries"))
return 0;
- ppc64_firmware_features |= FW_FEATURE_ISERIES;
- ppc64_firmware_features |= FW_FEATURE_LPAR;
+ powerpc_firmware_features |= FW_FEATURE_ISERIES;
+ powerpc_firmware_features |= FW_FEATURE_LPAR;
return 1;
}
-struct machdep_calls __initdata iseries_md = {
+define_machine(iseries) {
+ .name = "iSeries",
.setup_arch = iSeries_setup_arch,
.show_cpuinfo = iSeries_show_cpuinfo,
.init_IRQ = iSeries_init_IRQ,
@@ -930,7 +932,6 @@ void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size)
/* /chosen */
dt_start_node(dt, "chosen");
- dt_prop_u32(dt, "linux,platform", PLATFORM_ISERIES_LPAR);
dt_prop_str(dt, "bootargs", cmd_line);
if (cmd_mem_limit)
dt_prop_u64(dt, "linux,memory-limit", cmd_mem_limit);
diff --git a/trunk/arch/powerpc/platforms/maple/setup.c b/trunk/arch/powerpc/platforms/maple/setup.c
index ec5c1e10c407..24c0aef4ea39 100644
--- a/trunk/arch/powerpc/platforms/maple/setup.c
+++ b/trunk/arch/powerpc/platforms/maple/setup.c
@@ -259,9 +259,10 @@ static void __init maple_progress(char *s, unsigned short hex)
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
-static int __init maple_probe(int platform)
+static int __init maple_probe(void)
{
- if (platform != PLATFORM_MAPLE)
+ unsigned long root = of_get_flat_dt_root();
+ if (!of_flat_dt_is_compatible(root, "Momentum,Maple"))
return 0;
/*
* On U3, the DART (iommu) must be allocated now since it
@@ -274,7 +275,8 @@ static int __init maple_probe(int platform)
return 1;
}
-struct machdep_calls __initdata maple_md = {
+define_machine(maple_md) {
+ .name = "Maple",
.probe = maple_probe,
.setup_arch = maple_setup_arch,
.init_early = maple_init_early,
@@ -290,7 +292,7 @@ struct machdep_calls __initdata maple_md = {
.get_rtc_time = maple_get_rtc_time,
.calibrate_decr = generic_calibrate_decr,
.progress = maple_progress,
- .idle_loop = native_idle,
+ .power_save = power4_idle,
#ifdef CONFIG_KEXEC
.machine_kexec = default_machine_kexec,
.machine_kexec_prepare = default_machine_kexec_prepare,
diff --git a/trunk/arch/powerpc/platforms/powermac/bootx_init.c b/trunk/arch/powerpc/platforms/powermac/bootx_init.c
index fa8b4d7b5ded..eacbfd9beabc 100644
--- a/trunk/arch/powerpc/platforms/powermac/bootx_init.c
+++ b/trunk/arch/powerpc/platforms/powermac/bootx_init.c
@@ -161,9 +161,7 @@ static void __init bootx_dt_add_prop(char *name, void *data, int size,
static void __init bootx_add_chosen_props(unsigned long base,
unsigned long *mem_end)
{
- u32 val = _MACH_Pmac;
-
- bootx_dt_add_prop("linux,platform", &val, 4, mem_end);
+ u32 val;
if (bootx_info->kernelParamsOffset) {
char *args = (char *)((unsigned long)bootx_info) +
@@ -493,7 +491,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
&& (strcmp(model, "iMac,1") == 0
|| strcmp(model, "PowerMac1,1") == 0)) {
bootx_printf("iMac,1 detected, shutting down USB \n");
- out_le32((unsigned *)0x80880008, 1); /* XXX */
+ out_le32((unsigned __iomem *)0x80880008, 1); /* XXX */
}
}
diff --git a/trunk/arch/powerpc/platforms/powermac/feature.c b/trunk/arch/powerpc/platforms/powermac/feature.c
index e49eddd5042d..a5063cd675c5 100644
--- a/trunk/arch/powerpc/platforms/powermac/feature.c
+++ b/trunk/arch/powerpc/platforms/powermac/feature.c
@@ -2951,7 +2951,7 @@ static void *pmac_early_vresume_data;
void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
{
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return;
preempt_disable();
pmac_early_vresume_proc = proc;
diff --git a/trunk/arch/powerpc/platforms/powermac/low_i2c.c b/trunk/arch/powerpc/platforms/powermac/low_i2c.c
index 87eb6bb7f0e7..e14f9ac55cf4 100644
--- a/trunk/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/trunk/arch/powerpc/platforms/powermac/low_i2c.c
@@ -1457,6 +1457,9 @@ int __init pmac_i2c_init(void)
return 0;
i2c_inited = 1;
+ if (!machine_is(powermac))
+ return 0;
+
/* Probe keywest-i2c busses */
kw_i2c_probe();
diff --git a/trunk/arch/powerpc/platforms/powermac/nvram.c b/trunk/arch/powerpc/platforms/powermac/nvram.c
index 5fd28995c74c..262f967b880a 100644
--- a/trunk/arch/powerpc/platforms/powermac/nvram.c
+++ b/trunk/arch/powerpc/platforms/powermac/nvram.c
@@ -74,7 +74,7 @@ struct core99_header {
* Read and write the non-volatile RAM on PowerMacs and CHRP machines.
*/
static int nvram_naddrs;
-static volatile unsigned char *nvram_data;
+static volatile unsigned char __iomem *nvram_data;
static int is_core_99;
static int core99_bank = 0;
static int nvram_partitions[3];
@@ -148,7 +148,7 @@ static ssize_t core99_nvram_size(void)
}
#ifdef CONFIG_PPC32
-static volatile unsigned char *nvram_addr;
+static volatile unsigned char __iomem *nvram_addr;
static int nvram_mult;
static unsigned char direct_nvram_read_byte(int addr)
@@ -285,7 +285,7 @@ static int sm_erase_bank(int bank)
int stat, i;
unsigned long timeout;
- u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
+ u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE;
DBG("nvram: Sharp/Micron Erasing bank %d...\n", bank);
@@ -317,7 +317,7 @@ static int sm_write_bank(int bank, u8* datas)
int i, stat = 0;
unsigned long timeout;
- u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
+ u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE;
DBG("nvram: Sharp/Micron Writing bank %d...\n", bank);
@@ -352,7 +352,7 @@ static int amd_erase_bank(int bank)
int i, stat = 0;
unsigned long timeout;
- u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
+ u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE;
DBG("nvram: AMD Erasing bank %d...\n", bank);
@@ -399,7 +399,7 @@ static int amd_write_bank(int bank, u8* datas)
int i, stat = 0;
unsigned long timeout;
- u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
+ u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE;
DBG("nvram: AMD Writing bank %d...\n", bank);
@@ -597,7 +597,7 @@ int __init pmac_nvram_init(void)
}
#ifdef CONFIG_PPC32
- if (_machine == _MACH_chrp && nvram_naddrs == 1) {
+ if (machine_is(chrp) && nvram_naddrs == 1) {
nvram_data = ioremap(r1.start, s1);
nvram_mult = 1;
ppc_md.nvram_read_val = direct_nvram_read_byte;
diff --git a/trunk/arch/powerpc/platforms/powermac/pci.c b/trunk/arch/powerpc/platforms/powermac/pci.c
index de3f30e6b333..f5d8d15d74fa 100644
--- a/trunk/arch/powerpc/platforms/powermac/pci.c
+++ b/trunk/arch/powerpc/platforms/powermac/pci.c
@@ -1201,7 +1201,7 @@ void __init pmac_pcibios_after_init(void)
#ifdef CONFIG_PPC32
void pmac_pci_fixup_cardbus(struct pci_dev* dev)
{
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return;
/*
* Fix the interrupt routing on the various cardbus bridges
@@ -1244,8 +1244,9 @@ void pmac_pci_fixup_pciata(struct pci_dev* dev)
* On PowerMacs, we try to switch any PCI ATA controller to
* fully native mode
*/
- if (_machine != _MACH_Pmac)
+ if (!machine_is(powermac))
return;
+
/* Some controllers don't have the class IDE */
if (dev->vendor == PCI_VENDOR_ID_PROMISE)
switch(dev->device) {
diff --git a/trunk/arch/powerpc/platforms/powermac/pfunc_base.c b/trunk/arch/powerpc/platforms/powermac/pfunc_base.c
index 9b7150f10414..a3bd3e728fa3 100644
--- a/trunk/arch/powerpc/platforms/powermac/pfunc_base.c
+++ b/trunk/arch/powerpc/platforms/powermac/pfunc_base.c
@@ -336,6 +336,8 @@ int __init pmac_pfunc_base_install(void)
return 0;
pfbase_inited = 1;
+ if (!machine_is(powermac))
+ return 0;
DBG("Installing base platform functions...\n");
diff --git a/trunk/arch/powerpc/platforms/powermac/setup.c b/trunk/arch/powerpc/platforms/powermac/setup.c
index 385aab90c4d2..4d15e396655c 100644
--- a/trunk/arch/powerpc/platforms/powermac/setup.c
+++ b/trunk/arch/powerpc/platforms/powermac/setup.c
@@ -350,6 +350,13 @@ static void __init pmac_setup_arch(void)
smp_ops = &psurge_smp_ops;
#endif
#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_ADB
+ if (strstr(cmd_line, "adb_sync")) {
+ extern int __adb_probe_sync;
+ __adb_probe_sync = 1;
+ }
+#endif /* CONFIG_ADB */
}
char *bootpath;
@@ -576,30 +583,6 @@ pmac_halt(void)
pmac_power_off();
}
-#ifdef CONFIG_PPC32
-void __init pmac_init(void)
-{
- /* isa_io_base gets set in pmac_pci_init */
- isa_mem_base = PMAC_ISA_MEM_BASE;
- pci_dram_offset = PMAC_PCI_DRAM_OFFSET;
- ISA_DMA_THRESHOLD = ~0L;
- DMA_MODE_READ = 1;
- DMA_MODE_WRITE = 2;
-
- ppc_md = pmac_md;
-
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports;
- ppc_ide_md.default_io_base = pmac_ide_get_base;
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
-#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
-
- if (ppc_md.progress) ppc_md.progress("pmac_init(): exit", 0);
-
-}
-#endif
-
/*
* Early initialization.
*/
@@ -646,6 +629,12 @@ static int __init pmac_declare_of_platform_devices(void)
{
struct device_node *np;
+ if (machine_is(chrp))
+ return -1;
+
+ if (!machine_is(powermac))
+ return 0;
+
np = of_find_node_by_name(NULL, "valkyrie");
if (np)
of_platform_device_create(np, "valkyrie", NULL);
@@ -666,12 +655,15 @@ device_initcall(pmac_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
-static int __init pmac_probe(int platform)
+static int __init pmac_probe(void)
{
-#ifdef CONFIG_PPC64
- if (platform != PLATFORM_POWERMAC)
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "Power Macintosh") &&
+ !of_flat_dt_is_compatible(root, "MacRISC"))
return 0;
+#ifdef CONFIG_PPC64
/*
* On U3, the DART (iommu) must be allocated now since it
* has an impact on htab_initialize (due to the large page it
@@ -681,6 +673,23 @@ static int __init pmac_probe(int platform)
alloc_dart_table();
#endif
+#ifdef CONFIG_PPC32
+ /* isa_io_base gets set in pmac_pci_init */
+ isa_mem_base = PMAC_ISA_MEM_BASE;
+ pci_dram_offset = PMAC_PCI_DRAM_OFFSET;
+ ISA_DMA_THRESHOLD = ~0L;
+ DMA_MODE_READ = 1;
+ DMA_MODE_WRITE = 2;
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
+ ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports;
+ ppc_ide_md.default_io_base = pmac_ide_get_base;
+#endif /* CONFIG_BLK_DEV_IDE_PMAC */
+#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
+
+#endif /* CONFIG_PPC32 */
+
#ifdef CONFIG_PMAC_SMU
/*
* SMU based G5s need some memory below 2Gb, at least the current
@@ -709,10 +718,8 @@ static int pmac_pci_probe_mode(struct pci_bus *bus)
}
#endif
-struct machdep_calls __initdata pmac_md = {
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64)
- .cpu_die = generic_mach_cpu_die,
-#endif
+define_machine(powermac) {
+ .name = "PowerMac",
.probe = pmac_probe,
.setup_arch = pmac_setup_arch,
.init_early = pmac_init_early,
@@ -733,7 +740,7 @@ struct machdep_calls __initdata pmac_md = {
.progress = udbg_progress,
#ifdef CONFIG_PPC64
.pci_probe_mode = pmac_pci_probe_mode,
- .idle_loop = native_idle,
+ .power_save = power4_idle,
.enable_pmcs = power4_enable_pmcs,
#ifdef CONFIG_KEXEC
.machine_kexec = default_machine_kexec,
@@ -746,4 +753,7 @@ struct machdep_calls __initdata pmac_md = {
.pcibios_after_init = pmac_pcibios_after_init,
.phys_mem_access_prot = pci_phys_mem_access_prot,
#endif
+#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64)
+ .cpu_die = generic_mach_cpu_die,
+#endif
};
diff --git a/trunk/arch/powerpc/platforms/powermac/time.c b/trunk/arch/powerpc/platforms/powermac/time.c
index 5d9afa1fa02d..890758aa9667 100644
--- a/trunk/arch/powerpc/platforms/powermac/time.c
+++ b/trunk/arch/powerpc/platforms/powermac/time.c
@@ -336,10 +336,10 @@ static struct pmu_sleep_notifier time_sleep_notifier = {
*/
void __init pmac_calibrate_decr(void)
{
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && defined(CONFIG_ADB_PMU)
/* XXX why here? */
pmu_register_sleep_notifier(&time_sleep_notifier);
-#endif /* CONFIG_PM */
+#endif
generic_calibrate_decr();
diff --git a/trunk/arch/powerpc/platforms/powermac/udbg_scc.c b/trunk/arch/powerpc/platforms/powermac/udbg_scc.c
index c4352a8db644..b4fa9f03b461 100644
--- a/trunk/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/trunk/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -116,7 +116,7 @@ void udbg_scc_init(int force_scc)
/* Setup for 57600 8N1 */
if (ch == ch_a)
addr += 0x20;
- sccc = (volatile u8 * __iomem) ioremap(addr & PAGE_MASK, PAGE_SIZE) ;
+ sccc = ioremap(addr & PAGE_MASK, PAGE_SIZE) ;
sccc += addr & ~PAGE_MASK;
sccd = sccc + 0x10;
diff --git a/trunk/arch/powerpc/platforms/pseries/eeh.c b/trunk/arch/powerpc/platforms/pseries/eeh.c
index 2ab9dcdfb415..9b2b1cb117b3 100644
--- a/trunk/arch/powerpc/platforms/pseries/eeh.c
+++ b/trunk/arch/powerpc/platforms/pseries/eeh.c
@@ -1018,7 +1018,7 @@ static int __init eeh_init_proc(void)
{
struct proc_dir_entry *e;
- if (platform_is_pseries()) {
+ if (machine_is(pseries)) {
e = create_proc_entry("ppc64/eeh", 0, NULL);
if (e)
e->proc_fops = &proc_eeh_operations;
diff --git a/trunk/arch/powerpc/platforms/pseries/eeh_driver.c b/trunk/arch/powerpc/platforms/pseries/eeh_driver.c
index b811d5ff92fe..cc2495a0cdd5 100644
--- a/trunk/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/trunk/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -257,6 +257,7 @@ void handle_eeh_events (struct eeh_event *event)
struct pci_bus *frozen_bus;
int rc = 0;
enum pci_ers_result result = PCI_ERS_RESULT_NONE;
+ const char *pci_str, *drv_str;
frozen_dn = find_device_pe(event->dn);
frozen_bus = pcibios_find_pci_bus(frozen_dn);
@@ -291,6 +292,13 @@ void handle_eeh_events (struct eeh_event *event)
frozen_pdn = PCI_DN(frozen_dn);
frozen_pdn->eeh_freeze_count++;
+
+ pci_str = pci_name (frozen_pdn->pcidev);
+ drv_str = pcid_name (frozen_pdn->pcidev);
+ if (!pci_str) {
+ pci_str = pci_name (event->dev);
+ drv_str = pcid_name (event->dev);
+ }
if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES)
goto hard_fail;
@@ -306,9 +314,7 @@ void handle_eeh_events (struct eeh_event *event)
eeh_slot_error_detail(frozen_pdn, 1 /* Temporary Error */);
printk(KERN_WARNING
"EEH: This PCI device has failed %d times since last reboot: %s - %s\n",
- frozen_pdn->eeh_freeze_count,
- pci_name (frozen_pdn->pcidev),
- pcid_name(frozen_pdn->pcidev));
+ frozen_pdn->eeh_freeze_count, drv_str, pci_str);
/* Walk the various device drivers attached to this slot through
* a reset sequence, giving each an opportunity to do what it needs
@@ -360,9 +366,7 @@ void handle_eeh_events (struct eeh_event *event)
"EEH: PCI device %s - %s has failed %d times \n"
"and has been permanently disabled. Please try reseating\n"
"this device or replacing it.\n",
- pci_name (frozen_pdn->pcidev),
- pcid_name(frozen_pdn->pcidev),
- frozen_pdn->eeh_freeze_count);
+ drv_str, pci_str, frozen_pdn->eeh_freeze_count);
eeh_slot_error_detail(frozen_pdn, 2 /* Permanent Error */);
diff --git a/trunk/arch/powerpc/platforms/pseries/firmware.c b/trunk/arch/powerpc/platforms/pseries/firmware.c
index 989f4bc136cb..c01d8f0cbe6d 100644
--- a/trunk/arch/powerpc/platforms/pseries/firmware.c
+++ b/trunk/arch/powerpc/platforms/pseries/firmware.c
@@ -91,7 +91,7 @@ void __init fw_feature_init(void)
continue;
/* we have a match */
- ppc64_firmware_features |=
+ powerpc_firmware_features |=
firmware_features_table[i].val;
break;
}
diff --git a/trunk/arch/powerpc/platforms/pseries/hvconsole.c b/trunk/arch/powerpc/platforms/pseries/hvconsole.c
index 138e128a3886..ba6befd96636 100644
--- a/trunk/arch/powerpc/platforms/pseries/hvconsole.c
+++ b/trunk/arch/powerpc/platforms/pseries/hvconsole.c
@@ -62,6 +62,11 @@ int hvc_put_chars(uint32_t vtermno, const char *buf, int count)
unsigned long *lbuf = (unsigned long *) buf;
long ret;
+
+ /* hcall will ret H_PARAMETER if 'count' exceeds firmware max.*/
+ if (count > MAX_VIO_PUT_CHARS)
+ count = MAX_VIO_PUT_CHARS;
+
ret = plpar_hcall_norets(H_PUT_TERM_CHAR, vtermno, count, lbuf[0],
lbuf[1]);
if (ret == H_Success)
diff --git a/trunk/arch/powerpc/platforms/pseries/pci.c b/trunk/arch/powerpc/platforms/pseries/pci.c
index 946ad59e3352..e97e67f5e079 100644
--- a/trunk/arch/powerpc/platforms/pseries/pci.c
+++ b/trunk/arch/powerpc/platforms/pseries/pci.c
@@ -120,7 +120,7 @@ static void fixup_winbond_82c105(struct pci_dev* dev)
int i;
unsigned int reg;
- if (!platform_is_pseries())
+ if (!machine_is(pseries))
return;
printk("Using INTC for W82c105 IDE controller.\n");
diff --git a/trunk/arch/powerpc/platforms/pseries/pci_dlpar.c b/trunk/arch/powerpc/platforms/pseries/pci_dlpar.c
index 44abdeb9ca03..6bfacc217085 100644
--- a/trunk/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/trunk/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -28,6 +28,7 @@
#include
#include
#include
+#include
static struct pci_bus *
find_bus_among_children(struct pci_bus *bus,
@@ -152,20 +153,24 @@ pcibios_pci_config_bridge(struct pci_dev *dev)
void
pcibios_add_pci_devices(struct pci_bus * bus)
{
- int slotno, num;
+ int slotno, num, mode;
struct pci_dev *dev;
struct device_node *dn = pci_bus_to_OF_node(bus);
eeh_add_device_tree_early(dn);
- if (_machine == PLATFORM_PSERIES_LPAR) {
+ mode = PCI_PROBE_NORMAL;
+ if (ppc_md.pci_probe_mode)
+ mode = ppc_md.pci_probe_mode(bus);
+
+ if (mode == PCI_PROBE_DEVTREE) {
/* use ofdt-based probe */
of_scan_bus(dn, bus);
if (!list_empty(&bus->devices)) {
pcibios_fixup_new_pci_devices(bus, 0);
pci_bus_add_devices(bus);
}
- } else {
+ } else if (mode == PCI_PROBE_NORMAL) {
/* use legacy probe */
slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
diff --git a/trunk/arch/powerpc/platforms/pseries/ras.c b/trunk/arch/powerpc/platforms/pseries/ras.c
index b046bcf7443d..9639c66b453d 100644
--- a/trunk/arch/powerpc/platforms/pseries/ras.c
+++ b/trunk/arch/powerpc/platforms/pseries/ras.c
@@ -132,7 +132,7 @@ static int __init init_ras_IRQ(void)
of_node_put(np);
}
- return 1;
+ return 0;
}
__initcall(init_ras_IRQ);
diff --git a/trunk/arch/powerpc/platforms/pseries/reconfig.c b/trunk/arch/powerpc/platforms/pseries/reconfig.c
index 5ad90676567a..1773103354be 100644
--- a/trunk/arch/powerpc/platforms/pseries/reconfig.c
+++ b/trunk/arch/powerpc/platforms/pseries/reconfig.c
@@ -17,8 +17,9 @@
#include
#include
-#include
+#include
#include
+#include
@@ -508,7 +509,7 @@ static int proc_ppc64_create_ofdt(void)
{
struct proc_dir_entry *ent;
- if (!platform_is_pseries())
+ if (!machine_is(pseries))
return 0;
ent = create_proc_entry("ppc64/ofdt", S_IWUSR, NULL);
diff --git a/trunk/arch/powerpc/platforms/pseries/rtasd.c b/trunk/arch/powerpc/platforms/pseries/rtasd.c
index a6f628d4c9dc..fcc4d561a236 100644
--- a/trunk/arch/powerpc/platforms/pseries/rtasd.c
+++ b/trunk/arch/powerpc/platforms/pseries/rtasd.c
@@ -27,6 +27,7 @@
#include
#include
#include
+#include
#if 0
#define DEBUG(A...) printk(KERN_ERR A)
@@ -481,7 +482,7 @@ static int __init rtas_init(void)
{
struct proc_dir_entry *entry;
- if (!platform_is_pseries())
+ if (!machine_is(pseries))
return 0;
/* No RTAS */
diff --git a/trunk/arch/powerpc/platforms/pseries/setup.c b/trunk/arch/powerpc/platforms/pseries/setup.c
index 44d5c7fdcd97..b2fbf8ba8fbb 100644
--- a/trunk/arch/powerpc/platforms/pseries/setup.c
+++ b/trunk/arch/powerpc/platforms/pseries/setup.c
@@ -81,8 +81,8 @@ extern void find_udbg_vterm(void);
int fwnmi_active; /* TRUE if an FWNMI handler is present */
-static void pseries_shared_idle(void);
-static void pseries_dedicated_idle(void);
+static void pseries_shared_idle_sleep(void);
+static void pseries_dedicated_idle_sleep(void);
struct mpic *pSeries_mpic;
@@ -236,14 +236,13 @@ static void __init pSeries_setup_arch(void)
vpa_init(boot_cpuid);
if (get_lppaca()->shared_proc) {
printk(KERN_INFO "Using shared processor idle loop\n");
- ppc_md.idle_loop = pseries_shared_idle;
+ ppc_md.power_save = pseries_shared_idle_sleep;
} else {
printk(KERN_INFO "Using dedicated idle loop\n");
- ppc_md.idle_loop = pseries_dedicated_idle;
+ ppc_md.power_save = pseries_dedicated_idle_sleep;
}
} else {
printk(KERN_INFO "Using default idle loop\n");
- ppc_md.idle_loop = default_idle;
}
if (firmware_has_feature(FW_FEATURE_LPAR))
@@ -373,156 +372,123 @@ static int pSeries_check_legacy_ioport(unsigned int baseport)
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
-extern struct machdep_calls pSeries_md;
-static int __init pSeries_probe(int platform)
+static int __init pSeries_probe_hypertas(unsigned long node,
+ const char *uname, int depth,
+ void *data)
{
- if (platform != PLATFORM_PSERIES &&
- platform != PLATFORM_PSERIES_LPAR)
- return 0;
-
- /* if we have some ppc_md fixups for LPAR to do, do
- * it here ...
- */
+ if (depth != 1 ||
+ (strcmp(uname, "rtas") != 0 && strcmp(uname, "rtas@0") != 0))
+ return 0;
- if (platform == PLATFORM_PSERIES_LPAR)
- ppc64_firmware_features |= FW_FEATURE_LPAR;
+ if (of_get_flat_dt_prop(node, "ibm,hypertas-functions", NULL) != NULL)
+ powerpc_firmware_features |= FW_FEATURE_LPAR;
- return 1;
+ return 1;
}
-DECLARE_PER_CPU(unsigned long, smt_snooze_delay);
-
-static inline void dedicated_idle_sleep(unsigned int cpu)
+static int __init pSeries_probe(void)
{
- struct lppaca *plppaca = &lppaca[cpu ^ 1];
+ char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "device_type", NULL);
+ if (dtype == NULL)
+ return 0;
+ if (strcmp(dtype, "chrp"))
+ return 0;
- /* Only sleep if the other thread is not idle */
- if (!(plppaca->idle)) {
- local_irq_disable();
+ DBG("pSeries detected, looking for LPAR capability...\n");
- /*
- * We are about to sleep the thread and so wont be polling any
- * more.
- */
- clear_thread_flag(TIF_POLLING_NRFLAG);
- smp_mb__after_clear_bit();
-
- /*
- * SMT dynamic mode. Cede will result in this thread going
- * dormant, if the partner thread is still doing work. Thread
- * wakes up if partner goes idle, an interrupt is presented, or
- * a prod occurs. Returning from the cede enables external
- * interrupts.
- */
- if (!need_resched())
- cede_processor();
- else
- local_irq_enable();
- set_thread_flag(TIF_POLLING_NRFLAG);
- } else {
- /*
- * Give the HV an opportunity at the processor, since we are
- * not doing any work.
- */
- poll_pending();
- }
+ /* Now try to figure out if we are running on LPAR */
+ of_scan_flat_dt(pSeries_probe_hypertas, NULL);
+
+ DBG("Machine is%s LPAR !\n",
+ (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");
+
+ return 1;
}
-static void pseries_dedicated_idle(void)
+
+DECLARE_PER_CPU(unsigned long, smt_snooze_delay);
+
+static void pseries_dedicated_idle_sleep(void)
{
unsigned int cpu = smp_processor_id();
unsigned long start_snooze;
unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay);
- set_thread_flag(TIF_POLLING_NRFLAG);
-
- while (1) {
- /*
- * Indicate to the HV that we are idle. Now would be
- * a good time to find other work to dispatch.
- */
- get_lppaca()->idle = 1;
-
- if (!need_resched()) {
- start_snooze = get_tb() +
- *smt_snooze_delay * tb_ticks_per_usec;
-
- while (!need_resched() && !cpu_is_offline(cpu)) {
- ppc64_runlatch_off();
-
- /*
- * Go into low thread priority and possibly
- * low power mode.
- */
- HMT_low();
- HMT_very_low();
-
- if (*smt_snooze_delay != 0 &&
- get_tb() > start_snooze) {
- HMT_medium();
- dedicated_idle_sleep(cpu);
- }
-
- }
-
- HMT_medium();
- }
-
- get_lppaca()->idle = 0;
- ppc64_runlatch_on();
- preempt_enable_no_resched();
- schedule();
- preempt_disable();
+ /*
+ * Indicate to the HV that we are idle. Now would be
+ * a good time to find other work to dispatch.
+ */
+ get_lppaca()->idle = 1;
- if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
- cpu_die();
- }
-}
+ /*
+ * We come in with interrupts disabled, and need_resched()
+ * has been checked recently. If we should poll for a little
+ * while, do so.
+ */
+ if (*smt_snooze_delay) {
+ start_snooze = get_tb() +
+ *smt_snooze_delay * tb_ticks_per_usec;
+ local_irq_enable();
+ set_thread_flag(TIF_POLLING_NRFLAG);
-static void pseries_shared_idle(void)
-{
- unsigned int cpu = smp_processor_id();
+ while (get_tb() < start_snooze) {
+ if (need_resched() || cpu_is_offline(cpu))
+ goto out;
+ ppc64_runlatch_off();
+ HMT_low();
+ HMT_very_low();
+ }
- while (1) {
- /*
- * Indicate to the HV that we are idle. Now would be
- * a good time to find other work to dispatch.
- */
- get_lppaca()->idle = 1;
+ HMT_medium();
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ smp_mb();
+ local_irq_disable();
+ if (need_resched() || cpu_is_offline(cpu))
+ goto out;
+ }
- while (!need_resched() && !cpu_is_offline(cpu)) {
- local_irq_disable();
- ppc64_runlatch_off();
+ /*
+ * Cede if the other thread is not idle, so that it can
+ * go single-threaded. If the other thread is idle,
+ * we ask the hypervisor if it has pending work it
+ * wants to do and cede if it does. Otherwise we keep
+ * polling in order to reduce interrupt latency.
+ *
+ * Doing the cede when the other thread is active will
+ * result in this thread going dormant, meaning the other
+ * thread gets to run in single-threaded (ST) mode, which
+ * is slightly faster than SMT mode with this thread at
+ * very low priority. The cede enables interrupts, which
+ * doesn't matter here.
+ */
+ if (!lppaca[cpu ^ 1].idle || poll_pending() == H_Pending)
+ cede_processor();
- /*
- * Yield the processor to the hypervisor. We return if
- * an external interrupt occurs (which are driven prior
- * to returning here) or if a prod occurs from another
- * processor. When returning here, external interrupts
- * are enabled.
- *
- * Check need_resched() again with interrupts disabled
- * to avoid a race.
- */
- if (!need_resched())
- cede_processor();
- else
- local_irq_enable();
-
- HMT_medium();
- }
+out:
+ HMT_medium();
+ get_lppaca()->idle = 0;
+}
- get_lppaca()->idle = 0;
- ppc64_runlatch_on();
+static void pseries_shared_idle_sleep(void)
+{
+ /*
+ * Indicate to the HV that we are idle. Now would be
+ * a good time to find other work to dispatch.
+ */
+ get_lppaca()->idle = 1;
- preempt_enable_no_resched();
- schedule();
- preempt_disable();
+ /*
+ * Yield the processor to the hypervisor. We return if
+ * an external interrupt occurs (which are driven prior
+ * to returning here) or if a prod occurs from another
+ * processor. When returning here, external interrupts
+ * are enabled.
+ */
+ cede_processor();
- if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
- cpu_die();
- }
+ get_lppaca()->idle = 0;
}
static int pSeries_pci_probe_mode(struct pci_bus *bus)
@@ -553,7 +519,8 @@ static void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
}
#endif
-struct machdep_calls __initdata pSeries_md = {
+define_machine(pseries) {
+ .name = "pSeries",
.probe = pSeries_probe,
.setup_arch = pSeries_setup_arch,
.init_early = pSeries_init_early,
diff --git a/trunk/arch/powerpc/platforms/pseries/xics.c b/trunk/arch/powerpc/platforms/pseries/xics.c
index eb86cdb9b802..4864cb32be25 100644
--- a/trunk/arch/powerpc/platforms/pseries/xics.c
+++ b/trunk/arch/powerpc/platforms/pseries/xics.c
@@ -500,7 +500,7 @@ void xics_init_IRQ(void)
np;
np = of_find_node_by_type(np, "cpu")) {
ireg = (uint *)get_property(np, "reg", &ilen);
- if (ireg && ireg[0] == boot_cpuid_phys) {
+ if (ireg && ireg[0] == get_hard_smp_processor_id(boot_cpuid)) {
ireg = (uint *)get_property(np, "ibm,ppc-interrupt-gserver#s",
&ilen);
i = ilen / sizeof(int);
@@ -541,7 +541,7 @@ void xics_init_IRQ(void)
ops = &pSeriesLP_ops;
else {
#ifdef CONFIG_SMP
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
int hard_id;
/* FIXME: Do this dynamically! --RR */
diff --git a/trunk/arch/ppc/Kconfig b/trunk/arch/ppc/Kconfig
index 3a3e302b4ea2..e9a8f5d1dfcd 100644
--- a/trunk/arch/ppc/Kconfig
+++ b/trunk/arch/ppc/Kconfig
@@ -61,15 +61,15 @@ config 6xx
select PPC_FPU
help
There are four types of PowerPC chips supported. The more common
- types (601, 603, 604, 740, 750, 7400), the Motorola embedded
- versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM
- embedded versions (403 and 405) and the POWER3 processor.
- (For support for more recent 64-bit processors, set ARCH=powerpc.)
+ types (601, 603, 604, 740, 750, 7400), the older Freescale
+ (formerly Motorola) embedded versions (821, 823, 850, 855, 860,
+ 52xx, 82xx, 83xx), the IBM embedded versions (403 and 405) and
+ the Book E embedded processors from IBM (44x) and Freescale (85xx).
+ For support for 64-bit processors, set ARCH=powerpc.
Unless you are building a kernel for one of the embedded processor
- systems or a POWER3-based IBM RS/6000, choose 6xx.
- Note that the kernel runs in 32-bit mode even on 64-bit chips.
- Also note that because the 52xx, 82xx, & 83xx family has a 603e core,
- specific support for that chipset is asked later on.
+ systems, choose 6xx.
+ Also note that because the 52xx, 82xx, & 83xx family have a 603e
+ core, specific support for that chipset is asked later on.
config 40x
bool "40x"
@@ -77,10 +77,6 @@ config 40x
config 44x
bool "44x"
-config POWER3
- select PPC_FPU
- bool "POWER3"
-
config 8xx
bool "8xx"
@@ -252,14 +248,9 @@ config PPC601_SYNC_FIX
source arch/ppc/platforms/4xx/Kconfig
source arch/ppc/platforms/85xx/Kconfig
-config PPC64BRIDGE
- bool
- depends on POWER3
- default y
-
config PPC_STD_MMU
bool
- depends on 6xx || POWER3
+ depends on 6xx
default y
config NOT_COHERENT_CACHE
@@ -534,8 +525,8 @@ endmenu
choice
prompt "Machine Type"
- depends on 6xx || POWER3
- default PPC_MULTIPLATFORM
+ depends on 6xx
+ default PPC_PREP
---help---
Linux currently supports several different kinds of PowerPC-based
machines: Apple Power Macintoshes and clones (such as the Motorola
@@ -545,15 +536,14 @@ choice
Platform) machines (including all of the recent IBM RS/6000 and
pSeries machines), and several embedded PowerPC systems containing
4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the
- default option is to build a kernel which works on PReP and CHRP.
+ default option is to build a kernel which works on PReP.
- Note that support for Apple machines is now only available with
- ARCH=powerpc, and has been removed from this menu. If you wish
- to build a kernel for an Apple machine, exit this configuration
- process and re-run it with ARCH=powerpc.
+ Note that support for Apple and CHRP machines is now only available
+ with ARCH=powerpc, and has been removed from this menu. If you
+ wish to build a kernel for an Apple or CHRP machine, exit this
+ configuration process and re-run it with ARCH=powerpc.
- Select CHRP/PReP if configuring for an IBM RS/6000 or
- pSeries machine, or a PReP machine.
+ Select PReP if configuring for a PReP machine.
Select Gemini if configuring for a Synergy Microsystems' Gemini
series Single Board Computer. More information is available at:
@@ -562,8 +552,8 @@ choice
Select APUS if configuring for a PowerUP Amiga. More information is
available at: .
-config PPC_MULTIPLATFORM
- bool "CHRP/PReP"
+config PPC_PREP
+ bool "PReP"
config APUS
bool "Amiga-APUS"
@@ -715,6 +705,13 @@ config LITE5200
much but it's only been tested on this board version. I think this
board is also known as IceCube.
+config LITE5200B
+ bool "Freescale LITE5200B"
+ depends LITE5200
+ help
+ Support for the LITE5200B dev board for the MPC5200 from Freescale.
+ This is the new board with 2 PCI slots.
+
config MPC834x_SYS
bool "Freescale MPC834x SYS"
help
@@ -800,25 +797,6 @@ config CPM2
you wish to build a kernel for a machine with a CPM2 coprocessor
on it (826x, 827x, 8560).
-config PPC_CHRP
- bool "Support for CHRP (Common Hardware Reference Platform) machines"
- depends on PPC_MULTIPLATFORM
- select PPC_I8259
- select PPC_INDIRECT_PCI
- default y
-
-config PPC_PREP
- bool "Support for PReP (PowerPC Reference Platform) machines"
- depends on PPC_MULTIPLATFORM
- select PPC_I8259
- select PPC_INDIRECT_PCI
- default y
-
-config PPC_OF
- bool
- depends on PPC_CHRP
- default y
-
config PPC_GEN550
bool
depends on SANDPOINT || SPRUCE || PPLUS || \
@@ -977,14 +955,6 @@ source "mm/Kconfig"
source "fs/Kconfig.binfmt"
-config PROC_DEVICETREE
- bool "Support for Open Firmware device tree in /proc"
- depends on PPC_OF && PROC_FS
- help
- This option adds a device-tree directory under /proc which contains
- an image of the device tree that the kernel copies from Open
- Firmware. If unsure, say Y here.
-
config PREP_RESIDUAL
bool "Support for PReP Residual Data"
depends on PPC_PREP
@@ -1177,8 +1147,7 @@ menu "Bus options"
config ISA
bool "Support for ISA-bus hardware"
- depends on PPC_PREP || PPC_CHRP
- select PPC_I8259
+ depends on PPC_PREP
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -1188,18 +1157,18 @@ config ISA
config GENERIC_ISA_DMA
bool
- depends on POWER3 || 6xx && !CPM2
+ depends on 6xx && !CPM2
default y
config PPC_I8259
bool
- default y if 85xx
+ default y if 85xx || PPC_PREP
default n
config PPC_INDIRECT_PCI
bool
depends on PCI
- default y if 40x || 44x || 85xx || 83xx
+ default y if 40x || 44x || 85xx || 83xx || PPC_PREP
default n
config EISA
@@ -1390,7 +1359,7 @@ config CONSISTENT_SIZE
config BOOT_LOAD_BOOL
bool "Set the boot link/load address"
- depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
+ depends on ADVANCED_OPTIONS && !PPC_PREP
help
This option allows you to set the initial load address of the zImage
or zImage.initrd file. This can be useful if you are on a board
diff --git a/trunk/arch/ppc/Kconfig.debug b/trunk/arch/ppc/Kconfig.debug
index 8cc75abf3d83..f94b87740973 100644
--- a/trunk/arch/ppc/Kconfig.debug
+++ b/trunk/arch/ppc/Kconfig.debug
@@ -53,13 +53,6 @@ config BDI_SWITCH
Unless you are intending to debug the kernel with one of these
machines, say N here.
-config BOOTX_TEXT
- bool "Support for early boot text console (BootX or OpenFirmware only)"
- depends PPC_OF
- help
- Say Y here to see progress messages from the boot firmware in text
- mode. Requires either BootX or Open Firmware.
-
config SERIAL_TEXT_DEBUG
bool "Support for early boot texts over serial port"
depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
diff --git a/trunk/arch/ppc/Makefile b/trunk/arch/ppc/Makefile
index 9fbdf54ba2be..0db66dcf0723 100644
--- a/trunk/arch/ppc/Makefile
+++ b/trunk/arch/ppc/Makefile
@@ -40,10 +40,8 @@ ifndef CONFIG_FSL_BOOKE
CFLAGS += -mstring
endif
-cpu-as-$(CONFIG_PPC64BRIDGE) += -Wa,-mppc64bridge
cpu-as-$(CONFIG_4xx) += -Wa,-m405
cpu-as-$(CONFIG_6xx) += -Wa,-maltivec
-cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec
cpu-as-$(CONFIG_E500) += -Wa,-me500
cpu-as-$(CONFIG_E200) += -Wa,-me200
@@ -59,8 +57,6 @@ head-$(CONFIG_4xx) := arch/ppc/kernel/head_4xx.o
head-$(CONFIG_44x) := arch/ppc/kernel/head_44x.o
head-$(CONFIG_FSL_BOOKE) := arch/ppc/kernel/head_fsl_booke.o
-head-$(CONFIG_6xx) += arch/ppc/kernel/idle_6xx.o
-head-$(CONFIG_POWER4) += arch/ppc/kernel/idle_power4.o
head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o
core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \
@@ -71,7 +67,7 @@ core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \
core-$(CONFIG_4xx) += arch/ppc/platforms/4xx/
core-$(CONFIG_83xx) += arch/ppc/platforms/83xx/
core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/
-core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/
+core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/
core-$(CONFIG_XMON) += arch/ppc/xmon/
core-$(CONFIG_APUS) += arch/ppc/amiga/
drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/
diff --git a/trunk/arch/ppc/boot/Makefile b/trunk/arch/ppc/boot/Makefile
index 84eec0bef93c..b739e25d4728 100644
--- a/trunk/arch/ppc/boot/Makefile
+++ b/trunk/arch/ppc/boot/Makefile
@@ -19,14 +19,13 @@ HOSTCFLAGS += -Iarch/$(ARCH)/boot/include
BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd
bootdir-y := simple
-bootdir-$(CONFIG_PPC_OF) += openfirmware
subdir-y := lib common images
-subdir-$(CONFIG_PPC_MULTIPLATFORM) += of1275
+subdir-$(CONFIG_PPC_PREP) += of1275
# for cleaning
-subdir- += simple openfirmware
+subdir- += simple
-hostprogs-y := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree)
+hostprogs-y := $(addprefix utils/, mkprep mkbugboot mktree)
PHONY += $(BOOT_TARGETS) $(bootdir-y)
diff --git a/trunk/arch/ppc/boot/openfirmware/Makefile b/trunk/arch/ppc/boot/openfirmware/Makefile
deleted file mode 100644
index 66b739743759..000000000000
--- a/trunk/arch/ppc/boot/openfirmware/Makefile
+++ /dev/null
@@ -1,109 +0,0 @@
-# Makefile for making bootable images on various OpenFirmware machines.
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-# Paul Mackerras January 1997
-# XCOFF bootable images for PowerMacs
-# Geert Uytterhoeven September 1997
-# ELF bootable iamges for CHRP machines.
-# Tom Rini January 2001
-# Cleaned up, moved into arch/ppc/boot/pmac
-# Tom Rini July/August 2002
-# Merged 'chrp' and 'pmac' into 'openfirmware', and cleaned up the
-# rules.
-
-zImage.initrd znetboot.initrd: del-ramdisk-sec := -R .ramdisk
-zImage.initrd znetboot.initrd: initrd := .initrd
-
-
-boot := arch/ppc/boot
-common := $(boot)/common
-utils := $(boot)/utils
-bootlib := $(boot)/lib
-of1275 := $(boot)/of1275
-images := $(boot)/images
-
-CHRP_LD_ARGS := -T $(srctree)/$(boot)/ld.script -e _start -Ttext 0x00800000
-
-COMMONOBJS := start.o misc.o common.o
-CHRPOBJS := crt0.o $(COMMONOBJS) chrpmain.o
-
-targets := $(CHRPOBJS) dummy.o
-CHRPOBJS := $(addprefix $(obj)/, $(CHRPOBJS))
-
-LIBS := lib/lib.a $(bootlib)/lib.a $(of1275)/lib.a $(common)/lib.a
-
-ifdef CONFIG_SMP
-END := .smp
-endif
-ifdef CONFIG_PPC64BRIDGE
-END += .64
-endif
-
-
-$(images)/ramdisk.image.gz:
- @echo ' MISSING $@'
- @echo ' RAM disk image must be provided separately'
- @/bin/false
-
-quiet_cmd_genimage = GEN $@
- cmd_genimage = $(OBJCOPY) -R .comment \
- --add-section=.image=$(images)/vmlinux.gz \
- --set-section-flags=.image=contents,alloc,load,readonly,data $< $@
-
-targets += image.o
-$(obj)/image.o: $(obj)/dummy.o $(images)/vmlinux.gz FORCE
- $(call if_changed,genimage)
-
-# Place the ramdisk in the initrd image.
-quiet_cmd_genimage-initrd = GEN $@
- cmd_genimage-initrd = $(OBJCOPY) $< $@ \
- --add-section=.ramdisk=$(images)/ramdisk.image.gz \
- --set-section-flags=.ramdisk=contents,alloc,load,readonly,data
-targets += image.initrd.o
-$(obj)/image.initrd.o: $(obj)/image.o $(images)/ramdisk.image.gz FORCE
- $(call if_changed,genimage-initrd)
-
-
-targets += crt0.o
-$(obj)/crt0.o: $(common)/crt0.S FORCE
- $(call if_changed_dep,as_o_S)
-
-quiet_cmd_gen-chrp = CHRP $@
- cmd_gen-chrp = $(LD) $(CHRP_LD_ARGS) -o $@ $(CHRPOBJS) $< $(LIBS) && \
- $(OBJCOPY) $@ $@ -R .comment $(del-ramdisk-sec)
-
-$(images)/zImage.chrp: $(obj)/image.o $(CHRPOBJS) $(LIBS) \
- $(srctree)/$(boot)/ld.script
- $(call cmd,gen-chrp)
-$(images)/zImage.initrd.chrp: $(obj)/image.initrd.o $(CHRPOBJS) $(LIBS) \
- $(srctree)/$(boot)/ld.script
- $(call cmd,gen-chrp)
-
-quiet_cmd_addnote = ADDNOTE $@
- cmd_addnote = cat $< > $@ && $(utils)/addnote $@
-$(images)/zImage.chrp-rs6k $(images)/zImage.initrd.chrp-rs6k: \
- %-rs6k: %
- $(call cmd,addnote)
-
-# The targets used on the make command-line
-
-PHONY += zImage zImage.initrd
-zImage: $(images)/zImage.chrp \
- $(images)/zImage.chrp-rs6k
- @echo ' kernel: $@ is ready ($<)'
-zImage.initrd: $(images)/zImage.initrd.chrp \
- $(images)/zImage.initrd.chrp-rs6k
- @echo ' kernel: $@ is ready ($<)'
-
-TFTPIMAGE := /tftpboot/zImage
-
-PHONY += znetboot znetboot.initrd
-znetboot: $(images)/zImage.chrp
- cp $(images)/zImage.chrp $(TFTPIMAGE).chrp$(END)
- @echo ' kernel: $@ is ready ($<)'
-znetboot.initrd:$(images)/zImage.initrd.chrp
- cp $(images)/zImage.initrd.chrp $(TFTPIMAGE).chrp$(END)
- @echo ' kernel: $@ is ready ($<)'
-
diff --git a/trunk/arch/ppc/boot/openfirmware/chrpmain.c b/trunk/arch/ppc/boot/openfirmware/chrpmain.c
deleted file mode 100644
index 245dbd9fc120..000000000000
--- a/trunk/arch/ppc/boot/openfirmware/chrpmain.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include
-#include "nonstdio.h"
-#include "of1275.h"
-#include
-#include
-
-/* Passed from the linker */
-extern char __image_begin, __image_end;
-extern char __ramdisk_begin, __ramdisk_end;
-extern char _start, _end;
-
-extern unsigned int heap_max;
-extern void flush_cache(void *, unsigned long);
-extern void gunzip(void *, int, unsigned char *, int *);
-extern void make_bi_recs(unsigned long addr, char *name, unsigned int mach,
- unsigned int progend);
-
-char *avail_ram;
-char *begin_avail, *end_avail;
-char *avail_high;
-
-#define RAM_START 0x00000000
-#define RAM_END (64<<20)
-
-#define BOOT_START ((unsigned long)_start)
-#define BOOT_END ((unsigned long)(_end + 0xFFF) & ~0xFFF)
-
-#define RAM_FREE ((unsigned long)(_end+0x1000)&~0xFFF)
-#define PROG_START 0x00010000
-#define PROG_SIZE 0x007f0000 /* 8MB */
-
-#define SCRATCH_SIZE (128 << 10)
-
-static char scratch[SCRATCH_SIZE]; /* 128k of scratch space for gunzip */
-
-typedef void (*kernel_start_t)(int, int, void *, unsigned int, unsigned int);
-
-void
-boot(int a1, int a2, void *prom)
-{
- unsigned sa, len;
- void *dst;
- unsigned char *im;
- unsigned int initrd_size, initrd_start;
-
- printf("chrpboot starting: loaded at 0x%p\n\r", &_start);
-
- initrd_size = &__ramdisk_end - &__ramdisk_begin;
- if (initrd_size) {
- initrd_start = (RAM_END - initrd_size) & ~0xFFF;
- a1 = initrd_start;
- a2 = initrd_size;
- claim(initrd_start, RAM_END - initrd_start, 0);
- printf("initial ramdisk moving 0x%x <- 0x%p (%x bytes)\n\r",
- initrd_start, &__ramdisk_begin, initrd_size);
- memcpy((char *)initrd_start, &__ramdisk_begin, initrd_size);
- } else {
- initrd_start = 0;
- initrd_size = 0;
- a2 = 0xdeadbeef;
- }
-
- im = &__image_begin;
- len = &__image_end - &__image_begin;
- /* claim 4MB starting at PROG_START */
- claim(PROG_START, PROG_SIZE - PROG_START, 0);
- dst = (void *) PROG_START;
- if (im[0] == 0x1f && im[1] == 0x8b) {
- avail_ram = scratch;
- begin_avail = avail_high = avail_ram;
- end_avail = scratch + sizeof(scratch);
- printf("gunzipping (0x%p <- 0x%p:0x%p)...", dst, im, im+len);
- gunzip(dst, PROG_SIZE - PROG_START, im, &len);
- printf("done %u bytes\n\r", len);
- printf("%u bytes of heap consumed, max in use %u\n\r",
- avail_high - begin_avail, heap_max);
- } else {
- memmove(dst, im, len);
- }
-
- flush_cache(dst, len);
- make_bi_recs(((unsigned long) dst + len), "chrpboot", _MACH_chrp,
- (PROG_START + PROG_SIZE));
-
- sa = PROG_START;
- printf("start address = 0x%x\n\r", sa);
-
- (*(kernel_start_t)sa)(a1, a2, prom, initrd_start, initrd_size);
-
- printf("returned?\n\r");
-
- pause();
-}
diff --git a/trunk/arch/ppc/boot/openfirmware/common.c b/trunk/arch/ppc/boot/openfirmware/common.c
deleted file mode 100644
index 0f46756a903e..000000000000
--- a/trunk/arch/ppc/boot/openfirmware/common.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "nonstdio.h"
-#include "of1275.h"
-#include
-#include
-#include
-#include
-
-/* Information from the linker */
-
-extern int strcmp(const char *s1, const char *s2);
-extern char *avail_ram, *avail_high;
-extern char *end_avail;
-
-unsigned int heap_use, heap_max;
-
-struct memchunk {
- unsigned int size;
- struct memchunk *next;
-};
-
-static struct memchunk *freechunks;
-
-static void *zalloc(unsigned size)
-{
- void *p;
- struct memchunk **mpp, *mp;
-
- size = (size + 7) & -8;
- heap_use += size;
- if (heap_use > heap_max)
- heap_max = heap_use;
- for (mpp = &freechunks; (mp = *mpp) != 0; mpp = &mp->next) {
- if (mp->size == size) {
- *mpp = mp->next;
- return mp;
- }
- }
- p = avail_ram;
- avail_ram += size;
- if (avail_ram > avail_high)
- avail_high = avail_ram;
- if (avail_ram > end_avail) {
- printf("oops... out of memory\n\r");
- pause();
- }
- return p;
-}
-
-#define HEAD_CRC 2
-#define EXTRA_FIELD 4
-#define ORIG_NAME 8
-#define COMMENT 0x10
-#define RESERVED 0xe0
-
-void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
-{
- z_stream s;
- int r, i, flags;
-
- /* skip header */
- i = 10;
- flags = src[3];
- if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) {
- printf("bad gzipped data\n\r");
- exit();
- }
- if ((flags & EXTRA_FIELD) != 0)
- i = 12 + src[10] + (src[11] << 8);
- if ((flags & ORIG_NAME) != 0)
- while (src[i++] != 0)
- ;
- if ((flags & COMMENT) != 0)
- while (src[i++] != 0)
- ;
- if ((flags & HEAD_CRC) != 0)
- i += 2;
- if (i >= *lenp) {
- printf("gunzip: ran out of data in header\n\r");
- exit();
- }
-
- /* Initialize ourself. */
- s.workspace = zalloc(zlib_inflate_workspacesize());
- r = zlib_inflateInit2(&s, -MAX_WBITS);
- if (r != Z_OK) {
- printf("zlib_inflateInit2 returned %d\n\r", r);
- exit();
- }
- s.next_in = src + i;
- s.avail_in = *lenp - i;
- s.next_out = dst;
- s.avail_out = dstlen;
- r = zlib_inflate(&s, Z_FINISH);
- if (r != Z_OK && r != Z_STREAM_END) {
- printf("inflate returned %d msg: %s\n\r", r, s.msg);
- exit();
- }
- *lenp = s.next_out - (unsigned char *) dst;
- zlib_inflateEnd(&s);
-}
-
-/* Make a bi_rec in OF. We need to be passed a name for BI_BOOTLOADER_ID,
- * a machine type for BI_MACHTYPE, and the location where the end of the
- * bootloader is (PROG_START + PROG_SIZE)
- */
-void make_bi_recs(unsigned long addr, char *name, unsigned int mach,
- unsigned long progend)
-{
- struct bi_record *rec;
-
-
- /* leave a 1MB gap then align to the next 1MB boundary */
- addr = _ALIGN(addr+ (1<<20) - 1, (1<<20));
- /* oldworld machine seem very unhappy about this. -- Tom */
- if (addr >= progend)
- claim(addr, 0x1000, 0);
-
- rec = (struct bi_record *)addr;
- rec->tag = BI_FIRST;
- rec->size = sizeof(struct bi_record);
- rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
- rec->tag = BI_BOOTLOADER_ID;
- sprintf( (char *)rec->data, name);
- rec->size = sizeof(struct bi_record) + strlen(name) + 1;
- rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
- rec->tag = BI_MACHTYPE;
- rec->data[0] = mach;
- rec->data[1] = 1;
- rec->size = sizeof(struct bi_record) + 2 * sizeof(unsigned long);
- rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
- rec->tag = BI_LAST;
- rec->size = sizeof(struct bi_record);
- rec = (struct bi_record *)((unsigned long)rec + rec->size);
-}
diff --git a/trunk/arch/ppc/boot/openfirmware/dummy.c b/trunk/arch/ppc/boot/openfirmware/dummy.c
deleted file mode 100644
index 31dbf45bf99c..000000000000
--- a/trunk/arch/ppc/boot/openfirmware/dummy.c
+++ /dev/null
@@ -1,4 +0,0 @@
-int main(void)
-{
- return 0;
-}
diff --git a/trunk/arch/ppc/boot/openfirmware/misc.S b/trunk/arch/ppc/boot/openfirmware/misc.S
deleted file mode 100644
index ab9e897cadd0..000000000000
--- a/trunk/arch/ppc/boot/openfirmware/misc.S
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
- .text
-
-/*
- * Use the BAT2 & 3 registers to map the 1st 16MB of RAM to
- * the address given as the 1st argument.
- */
- .globl setup_bats
-setup_bats:
- mfpvr 5
- rlwinm 5,5,16,16,31 /* r3 = 1 for 601, 4 for 604 */
- cmpwi 0,5,1
- li 0,0
- bne 4f
- mtibatl 3,0 /* invalidate BAT first */
- ori 3,3,4 /* set up BAT registers for 601 */
- li 4,0x7f
- mtibatu 2,3
- mtibatl 2,4
- oris 3,3,0x80
- oris 4,4,0x80
- mtibatu 3,3
- mtibatl 3,4
- b 5f
-4: mtdbatu 3,0 /* invalidate BATs first */
- mtibatu 3,0
- ori 3,3,0xff /* set up BAT registers for 604 */
- li 4,2
- mtdbatl 2,4
- mtdbatu 2,3
- mtibatl 2,4
- mtibatu 2,3
- oris 3,3,0x80
- oris 4,4,0x80
- mtdbatl 3,4
- mtdbatu 3,3
- mtibatl 3,4
- mtibatu 3,3
-5: sync
- isync
- blr
-
-/*
- * Flush the dcache and invalidate the icache for a range of addresses.
- *
- * flush_cache(addr, len)
- */
- .global flush_cache
-flush_cache:
- addi 4,4,0x1f /* len = (len + 0x1f) / 0x20 */
- rlwinm. 4,4,27,5,31
- mtctr 4
- beqlr
-1: dcbf 0,3
- icbi 0,3
- addi 3,3,0x20
- bdnz 1b
- sync
- isync
- blr
diff --git a/trunk/arch/ppc/boot/openfirmware/start.c b/trunk/arch/ppc/boot/openfirmware/start.c
deleted file mode 100644
index 1617a26956bf..000000000000
--- a/trunk/arch/ppc/boot/openfirmware/start.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include
-#include "of1275.h"
-
-extern int strlen(const char *s);
-extern void boot(int a1, int a2, void *prom);
-
-phandle stdin;
-phandle stdout;
-phandle stderr;
-
-void printk(char *fmt, ...);
-
-void
-start(int a1, int a2, void *promptr)
-{
- ofinit(promptr);
- if (ofstdio(&stdin, &stdout, &stderr))
- exit();
-
- boot(a1, a2, promptr);
- for (;;)
- exit();
-}
-
-int writestring(void *f, char *ptr, int nb)
-{
- int w = 0, i;
- char *ret = "\r";
-
- for (i = 0; i < nb; ++i) {
- if (ptr[i] == '\n') {
- if (i > w) {
- write(f, ptr + w, i - w);
- w = i;
- }
- write(f, ret, 1);
- }
- }
- if (w < nb)
- write(f, ptr + w, nb - w);
- return nb;
-}
-
-int
-putc(int c, void *f)
-{
- char ch = c;
-
- return writestring(f, &ch, 1) == 1? c: -1;
-}
-
-int
-putchar(int c)
-{
- return putc(c, stdout);
-}
-
-int
-fputs(char *str, void *f)
-{
- int n = strlen(str);
-
- return writestring(f, str, n) == n? 0: -1;
-}
-
-int
-readchar(void)
-{
- char ch;
-
- for (;;) {
- switch (read(stdin, &ch, 1)) {
- case 1:
- return ch;
- case -1:
- printk("read(stdin) returned -1\n");
- return -1;
- }
- }
-}
-
-static char line[256];
-static char *lineptr;
-static int lineleft;
-
-int
-getchar(void)
-{
- int c;
-
- if (lineleft == 0) {
- lineptr = line;
- for (;;) {
- c = readchar();
- if (c == -1 || c == 4)
- break;
- if (c == '\r' || c == '\n') {
- *lineptr++ = '\n';
- putchar('\n');
- break;
- }
- switch (c) {
- case 0177:
- case '\b':
- if (lineptr > line) {
- putchar('\b');
- putchar(' ');
- putchar('\b');
- --lineptr;
- }
- break;
- case 'U' & 0x1F:
- while (lineptr > line) {
- putchar('\b');
- putchar(' ');
- putchar('\b');
- --lineptr;
- }
- break;
- default:
- if (lineptr >= &line[sizeof(line) - 1])
- putchar('\a');
- else {
- putchar(c);
- *lineptr++ = c;
- }
- }
- }
- lineleft = lineptr - line;
- lineptr = line;
- }
- if (lineleft == 0)
- return -1;
- --lineleft;
- return *lineptr++;
-}
-
-extern int vsprintf(char *buf, const char *fmt, va_list args);
-static char sprint_buf[1024];
-
-void
-printk(char *fmt, ...)
-{
- va_list args;
- int n;
-
- va_start(args, fmt);
- n = vsprintf(sprint_buf, fmt, args);
- va_end(args);
- writestring(stdout, sprint_buf, n);
-}
-
-int
-printf(char *fmt, ...)
-{
- va_list args;
- int n;
-
- va_start(args, fmt);
- n = vsprintf(sprint_buf, fmt, args);
- va_end(args);
- writestring(stdout, sprint_buf, n);
- return n;
-}
diff --git a/trunk/arch/ppc/boot/simple/mpc10x_memory.c b/trunk/arch/ppc/boot/simple/mpc10x_memory.c
index c24290823f7f..8da8f576031d 100644
--- a/trunk/arch/ppc/boot/simple/mpc10x_memory.c
+++ b/trunk/arch/ppc/boot/simple/mpc10x_memory.c
@@ -50,10 +50,10 @@ MPC10X_PCI_OP(read, dword, u32 *, in_le32, 0)
* the system. This assumes that the firmware has correctly set up the memory
* controller registers. On CONFIG_PPC_PREP, we know we are being called
* under a PReP memory map. On all other machines, we assume we are under
- * a CHRP memory map. Further, on CONFIG_PPC_MULTIPLATFORM we must rename
+ * a CHRP memory map. Further, on CONFIG_PPC_PREP we must rename
* this function.
*/
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_PREP
#define get_mem_size mpc10x_get_mem_size
#endif
unsigned long
diff --git a/trunk/arch/ppc/boot/simple/relocate.S b/trunk/arch/ppc/boot/simple/relocate.S
index 7efddc507564..2533113c1cc5 100644
--- a/trunk/arch/ppc/boot/simple/relocate.S
+++ b/trunk/arch/ppc/boot/simple/relocate.S
@@ -194,7 +194,7 @@ start_ldr:
/*
* Start at the begining.
*/
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_PREP
li r9,0xc
mtlr r9
/* tell kernel we're prep, by putting 0xdeadc0de at KERNELLOAD,
diff --git a/trunk/arch/ppc/boot/utils/addnote.c b/trunk/arch/ppc/boot/utils/addnote.c
deleted file mode 100644
index 6c52b18f2d04..000000000000
--- a/trunk/arch/ppc/boot/utils/addnote.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * Program to hack in a PT_NOTE program header entry in an ELF file.
- * This is needed for OF on RS/6000s to load an image correctly.
- * Note that OF needs a program header entry for the note, not an
- * ELF section.
- *
- * Copyright 2000 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Usage: addnote zImage
- */
-#include
-#include
-#include
-#include
-#include
-
-char arch[] = "PowerPC";
-
-#define N_DESCR 6
-unsigned int descr[N_DESCR] = {
-#if 1
- /* values for IBM RS/6000 machines */
- 0xffffffff, /* real-mode = true */
- 0x00c00000, /* real-base, i.e. where we expect OF to be */
- 0xffffffff, /* real-size */
- 0xffffffff, /* virt-base */
- 0xffffffff, /* virt-size */
- 0x4000, /* load-base */
-#else
- /* values for longtrail CHRP */
- 0, /* real-mode = false */
- 0xffffffff, /* real-base */
- 0xffffffff, /* real-size */
- 0xffffffff, /* virt-base */
- 0xffffffff, /* virt-size */
- 0x00600000, /* load-base */
-#endif
-};
-
-unsigned char buf[512];
-
-#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1]))
-#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2))
-
-#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \
- buf[(off) + 1] = (v) & 0xff)
-#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \
- PUT_16BE((off) + 2, (v)))
-
-/* Structure of an ELF file */
-#define E_IDENT 0 /* ELF header */
-#define E_PHOFF 28
-#define E_PHENTSIZE 42
-#define E_PHNUM 44
-#define E_HSIZE 52 /* size of ELF header */
-
-#define EI_MAGIC 0 /* offsets in E_IDENT area */
-#define EI_CLASS 4
-#define EI_DATA 5
-
-#define PH_TYPE 0 /* ELF program header */
-#define PH_OFFSET 4
-#define PH_FILESZ 16
-#define PH_HSIZE 32 /* size of program header */
-
-#define PT_NOTE 4 /* Program header type = note */
-
-#define ELFCLASS32 1
-#define ELFDATA2MSB 2
-
-unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' };
-
-int main(int ac, char **av)
-{
- int fd, n, i;
- int ph, ps, np;
- int nnote, ns;
-
- if (ac != 2) {
- fprintf(stderr, "Usage: %s elf-file\n", av[0]);
- exit(1);
- }
- fd = open(av[1], O_RDWR);
- if (fd < 0) {
- perror(av[1]);
- exit(1);
- }
-
- nnote = strlen(arch) + 1 + (N_DESCR + 3) * 4;
-
- n = read(fd, buf, sizeof(buf));
- if (n < 0) {
- perror("read");
- exit(1);
- }
-
- if (n < E_HSIZE || memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0)
- goto notelf;
-
- if (buf[E_IDENT+EI_CLASS] != ELFCLASS32
- || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) {
- fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n",
- av[1]);
- exit(1);
- }
-
- ph = GET_32BE(E_PHOFF);
- ps = GET_16BE(E_PHENTSIZE);
- np = GET_16BE(E_PHNUM);
- if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
- goto notelf;
- if (ph + (np + 1) * ps + nnote > n)
- goto nospace;
-
- for (i = 0; i < np; ++i) {
- if (GET_32BE(ph + PH_TYPE) == PT_NOTE) {
- fprintf(stderr, "%s already has a note entry\n",
- av[1]);
- exit(0);
- }
- ph += ps;
- }
-
- /* XXX check that the area we want to use is all zeroes */
- for (i = 0; i < ps + nnote; ++i)
- if (buf[ph + i] != 0)
- goto nospace;
-
- /* fill in the program header entry */
- ns = ph + ps;
- PUT_32BE(ph + PH_TYPE, PT_NOTE);
- PUT_32BE(ph + PH_OFFSET, ns);
- PUT_32BE(ph + PH_FILESZ, nnote);
-
- /* fill in the note area we point to */
- /* XXX we should probably make this a proper section */
- PUT_32BE(ns, strlen(arch) + 1);
- PUT_32BE(ns + 4, N_DESCR * 4);
- PUT_32BE(ns + 8, 0x1275);
- strcpy(&buf[ns + 12], arch);
- ns += 12 + strlen(arch) + 1;
- for (i = 0; i < N_DESCR; ++i)
- PUT_32BE(ns + i * 4, descr[i]);
-
- /* Update the number of program headers */
- PUT_16BE(E_PHNUM, np + 1);
-
- /* write back */
- lseek(fd, (long) 0, SEEK_SET);
- i = write(fd, buf, n);
- if (i < 0) {
- perror("write");
- exit(1);
- }
- if (i < n) {
- fprintf(stderr, "%s: write truncated\n", av[1]);
- exit(1);
- }
-
- exit(0);
-
- notelf:
- fprintf(stderr, "%s does not appear to be an ELF file\n", av[0]);
- exit(1);
-
- nospace:
- fprintf(stderr, "sorry, I can't find space in %s to put the note\n",
- av[0]);
- exit(1);
-}
diff --git a/trunk/arch/ppc/boot/utils/hack-coff.c b/trunk/arch/ppc/boot/utils/hack-coff.c
deleted file mode 100644
index 5e5a6573a1ef..000000000000
--- a/trunk/arch/ppc/boot/utils/hack-coff.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * hack-coff.c - hack the header of an xcoff file to fill in
- * a few fields needed by the Open Firmware xcoff loader on
- * Power Macs but not initialized by objcopy.
- *
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include
-#include
-#include
-#include
-#include
-#include "rs6000.h"
-
-#define AOUT_MAGIC 0x010b
-
-#define get_16be(x) ((((unsigned char *)(x))[0] << 8) \
- + ((unsigned char *)(x))[1])
-#define put_16be(x, v) (((unsigned char *)(x))[0] = (v) >> 8, \
- ((unsigned char *)(x))[1] = (v) & 0xff)
-#define get_32be(x) ((((unsigned char *)(x))[0] << 24) \
- + (((unsigned char *)(x))[1] << 16) \
- + (((unsigned char *)(x))[2] << 8) \
- + ((unsigned char *)(x))[3])
-
-int
-main(int ac, char **av)
-{
- int fd;
- int i, nsect;
- int aoutsz;
- struct external_filehdr fhdr;
- AOUTHDR aout;
- struct external_scnhdr shdr;
-
- if (ac != 2) {
- fprintf(stderr, "Usage: hack-coff coff-file\n");
- exit(1);
- }
- if ((fd = open(av[1], 2)) == -1) {
- perror(av[2]);
- exit(1);
- }
- if (read(fd, &fhdr, sizeof(fhdr)) != sizeof(fhdr))
- goto readerr;
- i = get_16be(fhdr.f_magic);
- if (i != U802TOCMAGIC && i != U802WRMAGIC && i != U802ROMAGIC) {
- fprintf(stderr, "%s: not an xcoff file\n", av[1]);
- exit(1);
- }
- aoutsz = get_16be(fhdr.f_opthdr);
- if (read(fd, &aout, aoutsz) != aoutsz)
- goto readerr;
- nsect = get_16be(fhdr.f_nscns);
- for (i = 0; i < nsect; ++i) {
- if (read(fd, &shdr, sizeof(shdr)) != sizeof(shdr))
- goto readerr;
- if (strcmp(shdr.s_name, ".text") == 0) {
- put_16be(aout.o_snentry, i+1);
- put_16be(aout.o_sntext, i+1);
- } else if (strcmp(shdr.s_name, ".data") == 0) {
- put_16be(aout.o_sndata, i+1);
- } else if (strcmp(shdr.s_name, ".bss") == 0) {
- put_16be(aout.o_snbss, i+1);
- }
- }
- put_16be(aout.magic, AOUT_MAGIC);
- if (lseek(fd, (long) sizeof(struct external_filehdr), 0) == -1
- || write(fd, &aout, aoutsz) != aoutsz) {
- fprintf(stderr, "%s: write error\n", av[1]);
- exit(1);
- }
- close(fd);
- exit(0);
-
-readerr:
- fprintf(stderr, "%s: read error or file too short\n", av[1]);
- exit(1);
-}
diff --git a/trunk/arch/ppc/boot/utils/mknote.c b/trunk/arch/ppc/boot/utils/mknote.c
deleted file mode 100644
index b9fbb2cbfc8f..000000000000
--- a/trunk/arch/ppc/boot/utils/mknote.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) Cort Dougan 1999.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Generate a note section as per the CHRP specification.
- *
- */
-
-#include
-#include
-
-#define PL(x) printf("%c%c%c%c", ((x)>>24)&0xff, ((x)>>16)&0xff, ((x)>>8)&0xff, (x)&0xff );
-
-int main(void)
-{
-/* header */
- /* namesz */
- PL(strlen("PowerPC")+1);
- /* descrsz */
- PL(6*4);
- /* type */
- PL(0x1275);
- /* name */
- printf("PowerPC"); printf("%c", 0);
-
-/* descriptor */
- /* real-mode */
- PL(0xffffffff);
- /* real-base */
- PL(0x00c00000);
- /* real-size */
- PL(0xffffffff);
- /* virt-base */
- PL(0xffffffff);
- /* virt-size */
- PL(0xffffffff);
- /* load-base */
- PL(0x4000);
- return 0;
-}
diff --git a/trunk/arch/ppc/configs/ibmchrp_defconfig b/trunk/arch/ppc/configs/ibmchrp_defconfig
deleted file mode 100644
index 27f3e69c1f96..000000000000
--- a/trunk/arch/ppc/configs/ibmchrp_defconfig
+++ /dev/null
@@ -1,875 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_CHRP=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_PREP=y
-CONFIG_PPC_OF=y
-CONFIG_PPCBUG_NVRAM=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HIGHMEM=y
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PPC_RTAS=y
-# CONFIG_PREP_RESIDUAL is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-CONFIG_ISA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_LBD=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_ADB is not set
-# CONFIG_ADB_CUDA is not set
-# CONFIG_ADB_PMU is not set
-# CONFIG_MAC_FLOPPY is not set
-# CONFIG_MAC_SERIAL is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_RAW=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-# CONFIG_SERIAL_PMACZILOG is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S3TRIO is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-# CONFIG_FB_MATROX_G450 is not set
-CONFIG_FB_MATROX_G100A=y
-CONFIG_FB_MATROX_G100=y
-# CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-CONFIG_FB_3DFX=y
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_EXPORTFS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_BOOTX_TEXT is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/trunk/arch/ppc/configs/pmac_defconfig b/trunk/arch/ppc/configs/pmac_defconfig
deleted file mode 100644
index a2db8b541c9b..000000000000
--- a/trunk/arch/ppc/configs/pmac_defconfig
+++ /dev/null
@@ -1,1591 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc3
-# Wed Jul 13 14:13:13 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-CONFIG_TAU=y
-# CONFIG_TAU_INT is not set
-# CONFIG_TAU_AVERAGE is not set
-# CONFIG_KEXEC is not set
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PMAC=y
-CONFIG_PPC601_SYNC_FIX=y
-CONFIG_PM=y
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_PPC_CHRP=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_PREP=y
-CONFIG_PPC_OF=y
-CONFIG_PPCBUG_NVRAM=y
-# CONFIG_SMP is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_PREP_RESIDUAL is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_SOFTWARE_SUSPEND=y
-CONFIG_PM_STD_PARTITION=""
-# CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_ISA is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_IOCTL is not set
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE_BOOL=y
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_TOSHIBA_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VLSI_FIR is not set
-# CONFIG_VIA_FIR is not set
-# CONFIG_BT is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_MAC_FLOPPY=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_LBD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_PDC202XX_FORCE is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_BLINK=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-CONFIG_AIC7XXX_DEBUG_ENABLE=y
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-CONFIG_SCSI_AIC7XXX_OLD=m
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_SCSI_MESH=y
-CONFIG_SCSI_MESH_SYNC_RATE=5
-CONFIG_SCSI_MESH_RESET_DELAY_MS=1000
-CONFIG_SCSI_MAC53C94=y
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_IEEE1394_OUI_DB is not set
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-# CONFIG_IEEE1394_EXPORT_FULL_API is not set
-
-#
-# Device Drivers
-#
-# CONFIG_IEEE1394_PCILYNX is not set
-CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_CMP=m
-CONFIG_IEEE1394_AMDTP=m
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-CONFIG_ADB=y
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_PMU=y
-CONFIG_PMAC_APM_EMU=y
-CONFIG_PMAC_MEDIABAY=y
-CONFIG_PMAC_BACKLIGHT=y
-CONFIG_ADB_MACIO=y
-CONFIG_INPUT_ADBHID=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_THERM_WINDTUNNEL=m
-CONFIG_THERM_ADT746X=m
-# CONFIG_ANSLCD is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACE=y
-# CONFIG_MACE_AAUI_PORT is not set
-CONFIG_BMAC=y
-# CONFIG_HAPPYMEAL is not set
-CONFIG_SUNGEM=y
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-CONFIG_APPLE_AIRPORT=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-CONFIG_AGP=m
-CONFIG_AGP_UNINORTH=m
-CONFIG_DRM=m
-# CONFIG_DRM_TDFX is not set
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_HYDRA is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
-CONFIG_I2C_KEYWEST=m
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-CONFIG_FB_CONTROL=y
-CONFIG_FB_PLATINUM=y
-CONFIG_FB_VALKYRIE=y
-CONFIG_FB_CT65550=y
-# CONFIG_FB_ASILIANT is not set
-CONFIG_FB_IMSTT=y
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
-# CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=y
-CONFIG_FB_ATY=y
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-# CONFIG_FB_ATY_XL_INIT is not set
-CONFIG_FB_ATY_GX=y
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-CONFIG_FB_3DFX=y
-CONFIG_FB_3DFX_ACCEL=y
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-CONFIG_DMASOUND_PMAC=m
-CONFIG_DMASOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_DUMMY=m
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
-
-#
-# ALSA PowerMac devices
-#
-CONFIG_SND_POWERMAC=m
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_USX2Y=m
-
-#
-# PCMCIA devices
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-CONFIG_BOOTX_TEXT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/trunk/arch/ppc/configs/power3_defconfig b/trunk/arch/ppc/configs/power3_defconfig
deleted file mode 100644
index a1ef929bca59..000000000000
--- a/trunk/arch/ppc/configs/power3_defconfig
+++ /dev/null
@@ -1,1035 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_HOTPLUG is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-CONFIG_POWER3=y
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC64BRIDGE=y
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_CHRP=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_PREP=y
-CONFIG_PPC_OF=y
-CONFIG_PPCBUG_NVRAM=y
-CONFIG_SMP=y
-# CONFIG_IRQ_ALL_CPUS is not set
-CONFIG_NR_CPUS=32
-# CONFIG_PREEMPT is not set
-CONFIG_HIGHMEM=y
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PPC_RTAS=y
-# CONFIG_PREP_RESIDUAL is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-CONFIG_ISA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-# CONFIG_HIGHMEM_START_BOOL is not set
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE_BOOL=y
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
-# CONFIG_PARPORT_SERIAL is not set
-CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_LBD=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=y
-# CONFIG_MD_MULTIPATH is not set
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=y
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_ADB is not set
-# CONFIG_ADB_CUDA is not set
-# CONFIG_ADB_PMU is not set
-# CONFIG_MAC_FLOPPY is not set
-# CONFIG_MAC_SERIAL is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-CONFIG_GAMEPORT=m
-CONFIG_SOUND_GAMEPORT=m
-# CONFIG_GAMEPORT_NS558 is not set
-# CONFIG_GAMEPORT_L4 is not set
-# CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_VORTEX is not set
-# CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_GAMEPORT_CS461x is not set
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCF=y
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_HYDRA is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_KEYWEST is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S3TRIO is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-# CONFIG_FB_MATROX_G450 is not set
-CONFIG_FB_MATROX_G100A=y
-CONFIG_FB_MATROX_G100=y
-CONFIG_FB_MATROX_I2C=y
-# CONFIG_FB_MATROX_MAVEN is not set
-CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-# CONFIG_DMASOUND_PMAC is not set
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_DUMMY=m
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ISA devices
-#
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_CS4231 is not set
-CONFIG_SND_CS4232=m
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_WAVEFRONT is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SSCAPE is not set
-
-#
-# PCI devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-CONFIG_SND_CS46XX=m
-# CONFIG_SND_CS46XX_NEW_DSP is not set
-CONFIG_SND_CS4281=m
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VX222 is not set
-
-#
-# ALSA PowerMac devices
-#
-# CONFIG_SND_POWERMAC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_BOOTX_TEXT=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
diff --git a/trunk/arch/ppc/configs/common_defconfig b/trunk/arch/ppc/configs/prep_defconfig
similarity index 100%
rename from trunk/arch/ppc/configs/common_defconfig
rename to trunk/arch/ppc/configs/prep_defconfig
diff --git a/trunk/arch/ppc/kernel/Makefile b/trunk/arch/ppc/kernel/Makefile
index e399bbb969a4..466437f4bcbb 100644
--- a/trunk/arch/ppc/kernel/Makefile
+++ b/trunk/arch/ppc/kernel/Makefile
@@ -1,48 +1,24 @@
#
# Makefile for the linux kernel.
#
-ifneq ($(CONFIG_PPC_MERGE),y)
-
extra-$(CONFIG_PPC_STD_MMU) := head.o
extra-$(CONFIG_40x) := head_4xx.o
extra-$(CONFIG_44x) := head_44x.o
extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
extra-$(CONFIG_8xx) := head_8xx.o
-extra-$(CONFIG_6xx) += idle_6xx.o
extra-y += vmlinux.lds
-obj-y := entry.o traps.o idle.o time.o misc.o \
+obj-y := entry.o traps.o time.o misc.o \
setup.o \
ppc_htab.o
-obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
-obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
-obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o
+obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_RAPIDIO) += rio.o
obj-$(CONFIG_KGDB) += ppc-stub.o
obj-$(CONFIG_SMP) += smp.o smp-tbsync.o
-obj-$(CONFIG_TAU) += temp.o
-ifndef CONFIG_E200
-obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o
-endif
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
ifndef CONFIG_MATH_EMULATION
obj-$(CONFIG_8xx) += softemu8xx.o
endif
-
-# These are here while we do the architecture merge
-
-else
-obj-y := idle.o
-obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
-obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
-obj-$(CONFIG_MODULES) += module.o
-obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o
-obj-$(CONFIG_KGDB) += ppc-stub.o
-obj-$(CONFIG_TAU) += temp.o
-ifndef CONFIG_E200
-obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o
-endif
-endif
diff --git a/trunk/arch/ppc/kernel/entry.S b/trunk/arch/ppc/kernel/entry.S
index 3a2815978488..5891ecbdc703 100644
--- a/trunk/arch/ppc/kernel/entry.S
+++ b/trunk/arch/ppc/kernel/entry.S
@@ -135,10 +135,10 @@ transfer_to_handler:
mfspr r11,SPRN_HID0
mtcr r11
BEGIN_FTR_SECTION
- bt- 8,power_save_6xx_restore /* Check DOZE */
+ bt- 8,4f /* Check DOZE */
END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
BEGIN_FTR_SECTION
- bt- 9,power_save_6xx_restore /* Check NAP */
+ bt- 9,4f /* Check NAP */
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
#endif /* CONFIG_6xx */
.globl transfer_to_handler_cont
@@ -157,6 +157,10 @@ transfer_to_handler_cont:
SYNC
RFI /* jump to handler, enable MMU */
+#ifdef CONFIG_6xx
+4: b power_save_6xx_restore
+#endif
+
/*
* On kernel stack overflow, load up an initial stack pointer
* and call StackOverflow(regs), which should not return.
@@ -926,55 +930,3 @@ END_FTR_SECTION_IFSET(CPU_FTR_601)
b 4b
.comm ee_restarts,4
-
-/*
- * PROM code for specific machines follows. Put it
- * here so it's easy to add arch-specific sections later.
- * -- Cort
- */
-#ifdef CONFIG_PPC_OF
-/*
- * On CHRP, the Run-Time Abstraction Services (RTAS) have to be
- * called with the MMU off.
- */
-_GLOBAL(enter_rtas)
- stwu r1,-INT_FRAME_SIZE(r1)
- mflr r0
- stw r0,INT_FRAME_SIZE+4(r1)
- lis r4,rtas_data@ha
- lwz r4,rtas_data@l(r4)
- lis r6,1f@ha /* physical return address for rtas */
- addi r6,r6,1f@l
- tophys(r6,r6)
- tophys(r7,r1)
- lis r8,rtas_entry@ha
- lwz r8,rtas_entry@l(r8)
- mfmsr r9
- stw r9,8(r1)
- LOAD_MSR_KERNEL(r0,MSR_KERNEL)
- SYNC /* disable interrupts so SRR0/1 */
- MTMSRD(r0) /* don't get trashed */
- li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
- mtlr r6
- CLR_TOP32(r7)
- mtspr SPRN_SPRG2,r7
- mtspr SPRN_SRR0,r8
- mtspr SPRN_SRR1,r9
- RFI
-1: tophys(r9,r1)
- lwz r8,INT_FRAME_SIZE+4(r9) /* get return address */
- lwz r9,8(r9) /* original msr value */
- FIX_SRR1(r9,r0)
- addi r1,r1,INT_FRAME_SIZE
- li r0,0
- mtspr SPRN_SPRG2,r0
- mtspr SPRN_SRR0,r8
- mtspr SPRN_SRR1,r9
- RFI /* return to caller */
-
- .globl machine_check_in_rtas
-machine_check_in_rtas:
- twi 31,0,0
- /* XXX load up BATs and panic */
-
-#endif /* CONFIG_PPC_OF */
diff --git a/trunk/arch/ppc/kernel/head.S b/trunk/arch/ppc/kernel/head.S
index 53ea845fb911..01303efeddad 100644
--- a/trunk/arch/ppc/kernel/head.S
+++ b/trunk/arch/ppc/kernel/head.S
@@ -37,19 +37,6 @@
#include
#endif
-#ifdef CONFIG_PPC64BRIDGE
-#define LOAD_BAT(n, reg, RA, RB) \
- ld RA,(n*32)+0(reg); \
- ld RB,(n*32)+8(reg); \
- mtspr SPRN_IBAT##n##U,RA; \
- mtspr SPRN_IBAT##n##L,RB; \
- ld RA,(n*32)+16(reg); \
- ld RB,(n*32)+24(reg); \
- mtspr SPRN_DBAT##n##U,RA; \
- mtspr SPRN_DBAT##n##L,RB; \
-
-#else /* CONFIG_PPC64BRIDGE */
-
/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
#define LOAD_BAT(n, reg, RA, RB) \
/* see the comment for clear_bats() -- Cort */ \
@@ -66,7 +53,6 @@
mtspr SPRN_DBAT##n##U,RA; \
mtspr SPRN_DBAT##n##L,RB; \
1:
-#endif /* CONFIG_PPC64BRIDGE */
.text
.stabs "arch/ppc/kernel/",N_SO,0,0,0f
@@ -129,11 +115,6 @@ _start:
.globl __start
__start:
-/*
- * We have to do any OF calls before we map ourselves to KERNELBASE,
- * because OF may have I/O devices mapped into that area
- * (particularly on CHRP).
- */
mr r31,r3 /* save parameters */
mr r30,r4
mr r29,r5
@@ -148,14 +129,6 @@ __start:
*/
bl early_init
-/*
- * On POWER4, we first need to tweak some CPU configuration registers
- * like real mode cache inhibit or exception base
- */
-#ifdef CONFIG_POWER4
- bl __970_cpu_preinit
-#endif /* CONFIG_POWER4 */
-
#ifdef CONFIG_APUS
/* On APUS the __va/__pa constants need to be set to the correct
* values before continuing.
@@ -169,7 +142,6 @@ __start:
*/
bl mmu_off
__after_mmu_off:
-#ifndef CONFIG_POWER4
bl clear_bats
bl flush_tlbs
@@ -177,10 +149,6 @@ __after_mmu_off:
#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
bl setup_disp_bat
#endif
-#else /* CONFIG_POWER4 */
- bl reloc_offset
- bl initial_mm_power4
-#endif /* CONFIG_POWER4 */
/*
* Call setup_cpu for CPU 0 and initialize 6xx Idle
@@ -192,18 +160,11 @@ __after_mmu_off:
bl reloc_offset
bl init_idle_6xx
#endif /* CONFIG_6xx */
-#ifdef CONFIG_POWER4
- bl reloc_offset
- bl init_idle_power4
-#endif /* CONFIG_POWER4 */
#ifndef CONFIG_APUS
/*
* We need to run with _start at physical address 0.
- * On CHRP, we are loaded at 0x10000 since OF on CHRP uses
- * the exception vectors at 0 (and therefore this copy
- * overwrites OF's exception vectors with our own).
* If the MMU is already turned on, we copy stuff to KERNELBASE,
* otherwise we copy it to 0.
*/
@@ -358,51 +319,19 @@ i##n: \
#endif
/* Machine check */
-/*
- * On CHRP, this is complicated by the fact that we could get a
- * machine check inside RTAS, and we have no guarantee that certain
- * critical registers will have the values we expect. The set of
- * registers that might have bad values includes all the GPRs
- * and all the BATs. We indicate that we are in RTAS by putting
- * a non-zero value, the address of the exception frame to use,
- * in SPRG2. The machine check handler checks SPRG2 and uses its
- * value if it is non-zero. If we ever needed to free up SPRG2,
- * we could use a field in the thread_info or thread_struct instead.
- * (Other exception handlers assume that r1 is a valid kernel stack
- * pointer when we take an exception from supervisor mode.)
- * -- paulus.
- */
. = 0x200
mtspr SPRN_SPRG0,r10
mtspr SPRN_SPRG1,r11
mfcr r10
-#ifdef CONFIG_PPC_CHRP
- mfspr r11,SPRN_SPRG2
- cmpwi 0,r11,0
- bne 7f
-#endif /* CONFIG_PPC_CHRP */
EXCEPTION_PROLOG_1
7: EXCEPTION_PROLOG_2
addi r3,r1,STACK_FRAME_OVERHEAD
-#ifdef CONFIG_PPC_CHRP
- mfspr r4,SPRN_SPRG2
- cmpwi cr1,r4,0
- bne cr1,1f
-#endif
EXC_XFER_STD(0x200, machine_check_exception)
-#ifdef CONFIG_PPC_CHRP
-1: b machine_check_in_rtas
-#endif
/* Data access exception. */
. = 0x300
-#ifdef CONFIG_PPC64BRIDGE
- b DataAccess
-DataAccessCont:
-#else
DataAccess:
EXCEPTION_PROLOG
-#endif /* CONFIG_PPC64BRIDGE */
mfspr r10,SPRN_DSISR
andis. r0,r10,0xa470 /* weird error? */
bne 1f /* if not, try to put a PTE */
@@ -414,21 +343,10 @@ DataAccess:
mfspr r4,SPRN_DAR
EXC_XFER_EE_LITE(0x300, handle_page_fault)
-#ifdef CONFIG_PPC64BRIDGE
-/* SLB fault on data access. */
- . = 0x380
- b DataSegment
-#endif /* CONFIG_PPC64BRIDGE */
-
/* Instruction access exception. */
. = 0x400
-#ifdef CONFIG_PPC64BRIDGE
- b InstructionAccess
-InstructionAccessCont:
-#else
InstructionAccess:
EXCEPTION_PROLOG
-#endif /* CONFIG_PPC64BRIDGE */
andis. r0,r9,0x4000 /* no pte found? */
beq 1f /* if so, try to put a PTE */
li r3,0 /* into the hash table */
@@ -438,12 +356,6 @@ InstructionAccess:
mr r5,r9
EXC_XFER_EE_LITE(0x400, handle_page_fault)
-#ifdef CONFIG_PPC64BRIDGE
-/* SLB fault on instruction access. */
- . = 0x480
- b InstructionSegment
-#endif /* CONFIG_PPC64BRIDGE */
-
/* External interrupt */
EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
@@ -708,15 +620,9 @@ DataStoreTLBMiss:
EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE)
EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-#ifdef CONFIG_POWER4
- EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x1700, Trap_17, altivec_assist_exception, EXC_XFER_EE)
- EXCEPTION(0x1800, Trap_18, TAUException, EXC_XFER_STD)
-#else /* !CONFIG_POWER4 */
EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE)
EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-#endif /* CONFIG_POWER4 */
EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
@@ -754,28 +660,6 @@ AltiVecUnavailable:
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
-#ifdef CONFIG_PPC64BRIDGE
-DataAccess:
- EXCEPTION_PROLOG
- b DataAccessCont
-
-InstructionAccess:
- EXCEPTION_PROLOG
- b InstructionAccessCont
-
-DataSegment:
- EXCEPTION_PROLOG
- addi r3,r1,STACK_FRAME_OVERHEAD
- mfspr r4,SPRN_DAR
- stw r4,_DAR(r11)
- EXC_XFER_STD(0x380, unknown_exception)
-
-InstructionSegment:
- EXCEPTION_PROLOG
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_STD(0x480, unknown_exception)
-#endif /* CONFIG_PPC64BRIDGE */
-
#ifdef CONFIG_ALTIVEC
/* Note that the AltiVec support is closely modeled after the FP
* support. Changes to one are likely to be applicable to the
@@ -1048,13 +932,6 @@ __secondary_start_pmac_0:
.globl __secondary_start
__secondary_start:
-#ifdef CONFIG_PPC64BRIDGE
- mfmsr r0
- clrldi r0,r0,1 /* make sure it's in 32-bit mode */
- SYNC
- MTMSRD(r0)
- isync
-#endif
/* Copy some CPU settings from CPU 0 */
bl __restore_cpu_setup
@@ -1065,10 +942,6 @@ __secondary_start:
lis r3,-KERNELBASE@h
bl init_idle_6xx
#endif /* CONFIG_6xx */
-#ifdef CONFIG_POWER4
- lis r3,-KERNELBASE@h
- bl init_idle_power4
-#endif /* CONFIG_POWER4 */
/* get current_thread_info and current */
lis r1,secondary_ti@ha
@@ -1109,12 +982,12 @@ __secondary_start:
* Those generic dummy functions are kept for CPUs not
* included in CONFIG_6xx
*/
-#if !defined(CONFIG_6xx) && !defined(CONFIG_POWER4)
+#if !defined(CONFIG_6xx)
_GLOBAL(__save_cpu_setup)
blr
_GLOBAL(__restore_cpu_setup)
blr
-#endif /* !defined(CONFIG_6xx) && !defined(CONFIG_POWER4) */
+#endif /* !defined(CONFIG_6xx) */
/*
@@ -1132,11 +1005,6 @@ load_up_mmu:
tophys(r6,r6)
lwz r6,_SDR1@l(r6)
mtspr SPRN_SDR1,r6
-#ifdef CONFIG_PPC64BRIDGE
- /* clear the ASR so we only use the pseudo-segment registers. */
- li r6,0
- mtasr r6
-#endif /* CONFIG_PPC64BRIDGE */
li r0,16 /* load up segment register values */
mtctr r0 /* for context 0 */
lis r3,0x2000 /* Ku = 1, VSID = 0 */
@@ -1145,7 +1013,7 @@ load_up_mmu:
addi r3,r3,0x111 /* increment VSID */
addis r4,r4,0x1000 /* address of next segment */
bdnz 3b
-#ifndef CONFIG_POWER4
+
/* Load the BAT registers with the values set up by MMU_init.
MMU_init takes care of whether we're on a 601 or not. */
mfpvr r3
@@ -1158,7 +1026,7 @@ load_up_mmu:
LOAD_BAT(1,r3,r4,r5)
LOAD_BAT(2,r3,r4,r5)
LOAD_BAT(3,r3,r4,r5)
-#endif /* CONFIG_POWER4 */
+
blr
/*
@@ -1269,9 +1137,6 @@ _GLOBAL(set_context)
li r4,0
isync
3:
-#ifdef CONFIG_PPC64BRIDGE
- slbie r4
-#endif /* CONFIG_PPC64BRIDGE */
mtsrin r3,r4
addi r3,r3,0x111 /* next VSID */
rlwinm r3,r3,0,8,3 /* clear out any overflow from VSID field */
@@ -1358,7 +1223,6 @@ mmu_off:
sync
RFI
-#ifndef CONFIG_POWER4
/*
* Use the first pair of BAT registers to map the 1st 16MB
* of RAM to KERNELBASE. From this point on we can't safely
@@ -1366,7 +1230,6 @@ mmu_off:
*/
initial_bats:
lis r11,KERNELBASE@h
-#ifndef CONFIG_PPC64BRIDGE
mfspr r9,SPRN_PVR
rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
cmpwi 0,r9,1
@@ -1381,7 +1244,6 @@ initial_bats:
mtspr SPRN_IBAT1L,r10
isync
blr
-#endif /* CONFIG_PPC64BRIDGE */
4: tophys(r8,r11)
#ifdef CONFIG_SMP
@@ -1395,11 +1257,6 @@ initial_bats:
ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */
#endif /* CONFIG_APUS */
-#ifdef CONFIG_PPC64BRIDGE
- /* clear out the high 32 bits in the BAT */
- clrldi r11,r11,32
- clrldi r8,r8,32
-#endif /* CONFIG_PPC64BRIDGE */
mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */
mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */
mtspr SPRN_IBAT0L,r8
@@ -1432,38 +1289,6 @@ setup_disp_bat:
#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */
-#else /* CONFIG_POWER4 */
-/*
- * Load up the SDR1 and segment register values now
- * since we don't have the BATs.
- * Also make sure we are running in 32-bit mode.
- */
-
-initial_mm_power4:
- addis r14,r3,_SDR1@ha /* get the value from _SDR1 */
- lwz r14,_SDR1@l(r14) /* assume hash table below 4GB */
- mtspr SPRN_SDR1,r14
- slbia
- lis r4,0x2000 /* set pseudo-segment reg 12 */
- ori r5,r4,0x0ccc
- mtsr 12,r5
-#if 0
- ori r5,r4,0x0888 /* set pseudo-segment reg 8 */
- mtsr 8,r5 /* (for access to serial port) */
-#endif
-#ifdef CONFIG_BOOTX_TEXT
- ori r5,r4,0x0999 /* set pseudo-segment reg 9 */
- mtsr 9,r5 /* (for access to screen) */
-#endif
- mfmsr r0
- clrldi r0,r0,1
- sync
- mtmsr r0
- isync
- blr
-
-#endif /* CONFIG_POWER4 */
-
#ifdef CONFIG_8260
/* Jump into the system reset for the rom.
* We first disable the MMU, and then jump to the ROM reset address.
diff --git a/trunk/arch/ppc/kernel/idle.c b/trunk/arch/ppc/kernel/idle.c
deleted file mode 100644
index 1be3ca5bae40..000000000000
--- a/trunk/arch/ppc/kernel/idle.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Idle daemon for PowerPC. Idle daemon will handle any action
- * that needs to be taken when the system becomes idle.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu). Subsequently hacked
- * on by Tom Rini, Armin Kuster, Paul Mackerras and others.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-void default_idle(void)
-{
- void (*powersave)(void);
-
- powersave = ppc_md.power_save;
-
- if (!need_resched()) {
- if (powersave != NULL)
- powersave();
-#ifdef CONFIG_SMP
- else {
- set_thread_flag(TIF_POLLING_NRFLAG);
- while (!need_resched() &&
- !cpu_is_offline(smp_processor_id()))
- barrier();
- clear_thread_flag(TIF_POLLING_NRFLAG);
- }
-#endif
- }
-}
-
-/*
- * The body of the idle task.
- */
-void cpu_idle(void)
-{
- int cpu = smp_processor_id();
-
- for (;;) {
- while (!need_resched()) {
- if (ppc_md.idle != NULL)
- ppc_md.idle();
- else
- default_idle();
- }
-
- if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
- cpu_die();
- preempt_enable_no_resched();
- schedule();
- preempt_disable();
- }
-}
-
-#if defined(CONFIG_SYSCTL) && defined(CONFIG_6xx)
-/*
- * Register the sysctl to set/clear powersave_nap.
- */
-extern int powersave_nap;
-
-static ctl_table powersave_nap_ctl_table[]={
- {
- .ctl_name = KERN_PPC_POWERSAVE_NAP,
- .procname = "powersave-nap",
- .data = &powersave_nap,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = &proc_dointvec,
- },
- { 0, },
-};
-static ctl_table powersave_nap_sysctl_root[] = {
- { 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, },
- { 0,},
-};
-
-static int __init
-register_powersave_nap_sysctl(void)
-{
- register_sysctl_table(powersave_nap_sysctl_root, 0);
-
- return 0;
-}
-
-__initcall(register_powersave_nap_sysctl);
-#endif
diff --git a/trunk/arch/ppc/kernel/idle_6xx.S b/trunk/arch/ppc/kernel/idle_6xx.S
deleted file mode 100644
index 1a2194cf6828..000000000000
--- a/trunk/arch/ppc/kernel/idle_6xx.S
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * This file contains the power_save function for 6xx & 7xxx CPUs
- * rewritten in assembler
- *
- * Warning ! This code assumes that if your machine has a 750fx
- * it will have PLL 1 set to low speed mode (used during NAP/DOZE).
- * if this is not the case some additional changes will have to
- * be done to check a runtime var (a bit like powersave-nap)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#undef DEBUG
-
- .text
-
-/*
- * Init idle, called at early CPU setup time from head.S for each CPU
- * Make sure no rest of NAP mode remains in HID0, save default
- * values for some CPU specific registers. Called with r24
- * containing CPU number and r3 reloc offset
- */
-_GLOBAL(init_idle_6xx)
-BEGIN_FTR_SECTION
- mfspr r4,SPRN_HID0
- rlwinm r4,r4,0,10,8 /* Clear NAP */
- mtspr SPRN_HID0, r4
- b 1f
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
- blr
-1:
- slwi r5,r24,2
- add r5,r5,r3
-BEGIN_FTR_SECTION
- mfspr r4,SPRN_MSSCR0
- addis r6,r5, nap_save_msscr0@ha
- stw r4,nap_save_msscr0@l(r6)
-END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
-BEGIN_FTR_SECTION
- mfspr r4,SPRN_HID1
- addis r6,r5,nap_save_hid1@ha
- stw r4,nap_save_hid1@l(r6)
-END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
- blr
-
-/*
- * Here is the power_save_6xx function. This could eventually be
- * split into several functions & changing the function pointer
- * depending on the various features.
- */
-_GLOBAL(ppc6xx_idle)
- /* Check if we can nap or doze, put HID0 mask in r3
- */
- lis r3, 0
-BEGIN_FTR_SECTION
- lis r3,HID0_DOZE@h
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
-BEGIN_FTR_SECTION
- /* We must dynamically check for the NAP feature as it
- * can be cleared by CPU init after the fixups are done
- */
- lis r4,cur_cpu_spec@ha
- lwz r4,cur_cpu_spec@l(r4)
- lwz r4,CPU_SPEC_FEATURES(r4)
- andi. r0,r4,CPU_FTR_CAN_NAP
- beq 1f
- /* Now check if user or arch enabled NAP mode */
- lis r4,powersave_nap@ha
- lwz r4,powersave_nap@l(r4)
- cmpwi 0,r4,0
- beq 1f
- lis r3,HID0_NAP@h
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
- cmpwi 0,r3,0
- beqlr
-
- /* Clear MSR:EE */
- mfmsr r7
- rlwinm r0,r7,0,17,15
- mtmsr r0
-
- /* Check current_thread_info()->flags */
- rlwinm r4,r1,0,0,18
- lwz r4,TI_FLAGS(r4)
- andi. r0,r4,_TIF_NEED_RESCHED
- beq 1f
- mtmsr r7 /* out of line this ? */
- blr
-1:
- /* Some pre-nap cleanups needed on some CPUs */
- andis. r0,r3,HID0_NAP@h
- beq 2f
-BEGIN_FTR_SECTION
- /* Disable L2 prefetch on some 745x and try to ensure
- * L2 prefetch engines are idle. As explained by errata
- * text, we can't be sure they are, we just hope very hard
- * that well be enough (sic !). At least I noticed Apple
- * doesn't even bother doing the dcbf's here...
- */
- mfspr r4,SPRN_MSSCR0
- rlwinm r4,r4,0,0,29
- sync
- mtspr SPRN_MSSCR0,r4
- sync
- isync
- lis r4,KERNELBASE@h
- dcbf 0,r4
- dcbf 0,r4
- dcbf 0,r4
- dcbf 0,r4
-END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
-#ifdef DEBUG
- lis r6,nap_enter_count@ha
- lwz r4,nap_enter_count@l(r6)
- addi r4,r4,1
- stw r4,nap_enter_count@l(r6)
-#endif
-2:
-BEGIN_FTR_SECTION
- /* Go to low speed mode on some 750FX */
- lis r4,powersave_lowspeed@ha
- lwz r4,powersave_lowspeed@l(r4)
- cmpwi 0,r4,0
- beq 1f
- mfspr r4,SPRN_HID1
- oris r4,r4,0x0001
- mtspr SPRN_HID1,r4
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
-
- /* Go to NAP or DOZE now */
- mfspr r4,SPRN_HID0
- lis r5,(HID0_NAP|HID0_SLEEP)@h
-BEGIN_FTR_SECTION
- oris r5,r5,HID0_DOZE@h
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
- andc r4,r4,r5
- or r4,r4,r3
-BEGIN_FTR_SECTION
- oris r4,r4,HID0_DPM@h /* that should be done once for all */
-END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
- mtspr SPRN_HID0,r4
-BEGIN_FTR_SECTION
- DSSALL
- sync
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
- ori r7,r7,MSR_EE /* Could be ommited (already set) */
- oris r7,r7,MSR_POW@h
- sync
- isync
- mtmsr r7
- isync
- sync
- blr
-
-/*
- * Return from NAP/DOZE mode, restore some CPU specific registers,
- * we are called with DR/IR still off and r2 containing physical
- * address of current.
- */
-_GLOBAL(power_save_6xx_restore)
- mfspr r11,SPRN_HID0
- rlwinm. r11,r11,0,10,8 /* Clear NAP & copy NAP bit !state to cr1 EQ */
- cror 4*cr1+eq,4*cr0+eq,4*cr0+eq
-BEGIN_FTR_SECTION
- rlwinm r11,r11,0,9,7 /* Clear DOZE */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
- mtspr SPRN_HID0, r11
-
-#ifdef DEBUG
- beq cr1,1f
- lis r11,(nap_return_count-KERNELBASE)@ha
- lwz r9,nap_return_count@l(r11)
- addi r9,r9,1
- stw r9,nap_return_count@l(r11)
-1:
-#endif
-
- rlwinm r9,r1,0,0,18
- tophys(r9,r9)
- lwz r11,TI_CPU(r9)
- slwi r11,r11,2
- /* Todo make sure all these are in the same page
- * and load r22 (@ha part + CPU offset) only once
- */
-BEGIN_FTR_SECTION
- beq cr1,1f
- addis r9,r11,(nap_save_msscr0-KERNELBASE)@ha
- lwz r9,nap_save_msscr0@l(r9)
- mtspr SPRN_MSSCR0, r9
- sync
- isync
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
-BEGIN_FTR_SECTION
- addis r9,r11,(nap_save_hid1-KERNELBASE)@ha
- lwz r9,nap_save_hid1@l(r9)
- mtspr SPRN_HID1, r9
-END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
- b transfer_to_handler_cont
-
- .data
-
-_GLOBAL(nap_save_msscr0)
- .space 4*NR_CPUS
-
-_GLOBAL(nap_save_hid1)
- .space 4*NR_CPUS
-
-_GLOBAL(powersave_nap)
- .long 0
-_GLOBAL(powersave_lowspeed)
- .long 0
-
-#ifdef DEBUG
-_GLOBAL(nap_enter_count)
- .space 4
-_GLOBAL(nap_return_count)
- .space 4
-#endif
diff --git a/trunk/arch/ppc/kernel/idle_power4.S b/trunk/arch/ppc/kernel/idle_power4.S
deleted file mode 100644
index cc0d535365cd..000000000000
--- a/trunk/arch/ppc/kernel/idle_power4.S
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * This file contains the power_save function for 6xx & 7xxx CPUs
- * rewritten in assembler
- *
- * Warning ! This code assumes that if your machine has a 750fx
- * it will have PLL 1 set to low speed mode (used during NAP/DOZE).
- * if this is not the case some additional changes will have to
- * be done to check a runtime var (a bit like powersave-nap)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#undef DEBUG
-
- .text
-
-/*
- * Init idle, called at early CPU setup time from head.S for each CPU
- * So nothing for now. Called with r24 containing CPU number and r3
- * reloc offset
- */
- .globl init_idle_power4
-init_idle_power4:
- blr
-
-/*
- * Here is the power_save_6xx function. This could eventually be
- * split into several functions & changing the function pointer
- * depending on the various features.
- */
- .globl power4_idle
-power4_idle:
-BEGIN_FTR_SECTION
- blr
-END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
- /* We must dynamically check for the NAP feature as it
- * can be cleared by CPU init after the fixups are done
- */
- lis r4,cur_cpu_spec@ha
- lwz r4,cur_cpu_spec@l(r4)
- lwz r4,CPU_SPEC_FEATURES(r4)
- andi. r0,r4,CPU_FTR_CAN_NAP
- beqlr
- /* Now check if user or arch enabled NAP mode */
- lis r4,powersave_nap@ha
- lwz r4,powersave_nap@l(r4)
- cmpwi 0,r4,0
- beqlr
-
- /* Clear MSR:EE */
- mfmsr r7
- rlwinm r0,r7,0,17,15
- mtmsr r0
-
- /* Check current_thread_info()->flags */
- rlwinm r4,r1,0,0,18
- lwz r4,TI_FLAGS(r4)
- andi. r0,r4,_TIF_NEED_RESCHED
- beq 1f
- mtmsr r7 /* out of line this ? */
- blr
-1:
- /* Go to NAP now */
-BEGIN_FTR_SECTION
- DSSALL
- sync
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
- ori r7,r7,MSR_EE /* Could be ommited (already set) */
- oris r7,r7,MSR_POW@h
- sync
- isync
- mtmsr r7
- isync
- sync
- blr
-
- .globl powersave_nap
-powersave_nap:
- .long 0
diff --git a/trunk/arch/ppc/kernel/pci.c b/trunk/arch/ppc/kernel/pci.c
index 04d04c5bfdd0..809673a36f7a 100644
--- a/trunk/arch/ppc/kernel/pci.c
+++ b/trunk/arch/ppc/kernel/pci.c
@@ -46,9 +46,6 @@ static void pcibios_fixup_resources(struct pci_dev* dev);
static void fixup_broken_pcnet32(struct pci_dev* dev);
static int reparent_resources(struct resource *parent, struct resource *res);
static void fixup_cpc710_pci64(struct pci_dev* dev);
-#ifdef CONFIG_PPC_OF
-static u8* pci_to_OF_bus_map;
-#endif
/* By default, we don't re-assign bus numbers.
*/
@@ -625,406 +622,13 @@ pcibios_alloc_controller(void)
return hose;
}
-#ifdef CONFIG_PPC_OF
-/*
- * Functions below are used on OpenFirmware machines.
- */
-static void
-make_one_node_map(struct device_node* node, u8 pci_bus)
-{
- int *bus_range;
- int len;
-
- if (pci_bus >= pci_bus_count)
- return;
- bus_range = (int *) get_property(node, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int)) {
- printk(KERN_WARNING "Can't get bus-range for %s, "
- "assuming it starts at 0\n", node->full_name);
- pci_to_OF_bus_map[pci_bus] = 0;
- } else
- pci_to_OF_bus_map[pci_bus] = bus_range[0];
-
- for (node=node->child; node != 0;node = node->sibling) {
- struct pci_dev* dev;
- unsigned int *class_code, *reg;
-
- class_code = (unsigned int *) get_property(node, "class-code", NULL);
- if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
- (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
- continue;
- reg = (unsigned int *)get_property(node, "reg", NULL);
- if (!reg)
- continue;
- dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff));
- if (!dev || !dev->subordinate)
- continue;
- make_one_node_map(node, dev->subordinate->number);
- }
-}
-
-void
-pcibios_make_OF_bus_map(void)
-{
- int i;
- struct pci_controller* hose;
- u8* of_prop_map;
-
- pci_to_OF_bus_map = (u8*)kmalloc(pci_bus_count, GFP_KERNEL);
- if (!pci_to_OF_bus_map) {
- printk(KERN_ERR "Can't allocate OF bus map !\n");
- return;
- }
-
- /* We fill the bus map with invalid values, that helps
- * debugging.
- */
- for (i=0; i