diff --git a/[refs] b/[refs] index e1429b91023c..52148d245e5b 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 93d68e52295fb8b65ded6db49e32e63b6a203e0b +refs/heads/master: 6605f9ac69593d480324ba5fa05f64cfebf4db2f diff --git a/trunk/Documentation/RCU/RTFP.txt b/trunk/Documentation/RCU/RTFP.txt index c43460dade0f..7c1dfb19fc40 100644 --- a/trunk/Documentation/RCU/RTFP.txt +++ b/trunk/Documentation/RCU/RTFP.txt @@ -1,9 +1,10 @@ -Read the F-ing Papers! +Read the Fscking Papers! This document describes RCU-related publications, and is followed by the corresponding bibtex entries. A number of the publications may -be found at http://www.rdrop.com/users/paulmck/RCU/. +be found at http://www.rdrop.com/users/paulmck/RCU/. For others, browsers +and search engines will usually find what you are looking for. The first thing resembling RCU was published in 1980, when Kung and Lehman [Kung80] recommended use of a garbage collector to defer destruction @@ -160,7 +161,26 @@ which Mathieu Desnoyers is now maintaining [MathieuDesnoyers2009URCU] [MathieuDesnoyersPhD]. TINY_RCU [PaulEMcKenney2009BloatWatchRCU] made its appearance, as did expedited RCU [PaulEMcKenney2009expeditedRCU]. The problem of resizeable RCU-protected hash tables may now be on a path -to a solution [JoshTriplett2009RPHash]. +to a solution [JoshTriplett2009RPHash]. A few academic researchers are now +using RCU to solve their parallel problems [HariKannan2009DynamicAnalysisRCU]. + +2010 produced a simpler preemptible-RCU implementation +based on TREE_RCU [PaulEMcKenney2010SimpleOptRCU], lockdep-RCU +[PaulEMcKenney2010LockdepRCU], another resizeable RCU-protected hash +table [HerbertXu2010RCUResizeHash] (this one consuming more memory, +but allowing arbitrary changes in hash function, as required for DoS +avoidance in the networking code), realization of the 2009 RCU-protected +hash table with atomic node move [JoshTriplett2010RPHash], an update on +the RCU API [PaulEMcKenney2010RCUAPI]. + +2011 marked the inclusion of Nick Piggin's fully lockless dentry search +[LinusTorvalds2011Linux2:6:38:rc1:NPigginVFS], an RCU-protected red-black +tree using software transactional memory to protect concurrent updates +(strange, but true!) [PhilHoward2011RCUTMRBTree], yet another variant of +RCU-protected resizeable hash tables [Triplett:2011:RPHash], the 3.0 RCU +trainwreck [PaulEMcKenney2011RCU3.0trainwreck], and Neil Brown's "Meet the +Lockers" LWN article [NeilBrown2011MeetTheLockers]. + Bibtex Entries @@ -173,6 +193,14 @@ Bibtex Entries ,volume="5" ,number="3" ,pages="354-382" +,note="Available: +\url{http://portal.acm.org/citation.cfm?id=320619&dl=GUIDE,} +[Viewed December 3, 2007]" +,annotation={ + Use garbage collector to clean up data after everyone is done with it. + . + Oldest use of something vaguely resembling RCU that I have found. +} } @techreport{Manber82 @@ -184,6 +212,31 @@ Bibtex Entries ,number="82-01-01" ,month="January" ,pages="28" +,annotation={ + . + Superseded by Manber84. + . + Describes concurrent AVL tree implementation. Uses a + garbage-collection mechanism to handle concurrent use and deletion + of nodes in the tree, but lacks the summary-of-execution-history + concept of read-copy locking. + . + Keeps full list of processes that were active when a given + node was to be deleted, and waits until all such processes have + -terminated- before allowing this node to be reused. This is + not described in great detail -- one could imagine using process + IDs for this if the ID space was large enough that overlapping + never occurred. + . + This restriction makes this algorithm unsuitable for use in + systems comprised of long-lived processes. It also produces + completely unacceptable overhead in systems with large numbers + of processes. Finally, it is specific to AVL trees. + . + Cites Kung80, so not an independent invention, but the first + RCU-like usage that does not rely on an automatic garbage + collector. +} } @article{Manber84 @@ -195,6 +248,74 @@ Bibtex Entries ,volume="9" ,number="3" ,pages="439-455" +,annotation={ + Describes concurrent AVL tree implementation. Uses a + garbage-collection mechanism to handle concurrent use and deletion + of nodes in the tree, but lacks the summary-of-execution-history + concept of read-copy locking. + . + Keeps full list of processes that were active when a given + node was to be deleted, and waits until all such processes have + -terminated- before allowing this node to be reused. This is + not described in great detail -- one could imagine using process + IDs for this if the ID space was large enough that overlapping + never occurred. + . + This restriction makes this algorithm unsuitable for use in + systems comprised of long-lived processes. It also produces + completely unacceptable overhead in systems with large numbers + of processes. Finally, it is specific to AVL trees. +} +} + +@Conference{RichardRashid87a +,Author="Richard Rashid and Avadis Tevanian and Michael Young and +David Golub and Robert Baron and David Black and William Bolosky and +Jonathan Chew" +,Title="Machine-Independent Virtual Memory Management for Paged +Uniprocessor and Multiprocessor Architectures" +,Booktitle="{2\textsuperscript{nd} Symposium on Architectural Support +for Programming Languages and Operating Systems}" +,Publisher="Association for Computing Machinery" +,Month="October" +,Year="1987" +,pages="31-39" +,Address="Palo Alto, CA" +,note="Available: +\url{http://www.cse.ucsc.edu/~randal/221/rashid-machvm.pdf} +[Viewed February 17, 2005]" +,annotation={ + Describes lazy TLB flush, where one waits for each CPU to pass + through a scheduling-clock interrupt before reusing a given range + of virtual address. Does not describe how one determines that + all CPUs have in fact taken such an interrupt, though there are + no shortage of straightforward methods for accomplishing this. + . + Note that it does not make sense to just wait a fixed amount of + time, since a given CPU might have interrupts disabled for an + extended amount of time. +} +} + +@article{BarbaraLiskov1988ArgusCACM +,author = {Barbara Liskov} +,title = {Distributed programming in {Argus}} +,journal = {Commun. ACM} +,volume = {31} +,number = {3} +,year = {1988} +,issn = {0001-0782} +,pages = {300--312} +,doi = {http://doi.acm.org/10.1145/42392.42399} +,publisher = {ACM} +,address = {New York, NY, USA} +,annotation= { + At the top of page 307: "Conflicts with deposits and withdrawals + are necessary if the reported total is to be up to date. They + could be avoided by having total return a sum that is slightly + out of date." Relies on semantics -- approximate numerical + values sometimes OK. +} } @techreport{Hennessy89 @@ -216,6 +337,13 @@ Bibtex Entries ,year="1990" ,number="CS-TR-2222.1" ,month="June" +,annotation={ + Concurrent access to skip lists. Has both weak and strong search. + Uses concept of ``garbage queue'', but has no real way of cleaning + the garbage efficiently. + . + Appears to be an independent invention of an RCU-like mechanism. +} } @Book{Adams91 @@ -223,20 +351,15 @@ Bibtex Entries ,title="Concurrent Programming, Principles, and Practices" ,Publisher="Benjamin Cummins" ,Year="1991" +,annotation={ + Has a few paragraphs describing ``chaotic relaxation'', a + numerical analysis technique that allows multiprocessors to + avoid synchronization overhead by using possibly-stale data. + . + Seems like this is descended from yet another independent + invention of RCU-like function -- but this is restricted + in that reclamation is not necessary. } - -@phdthesis{HMassalinPhD -,author="H. Massalin" -,title="Synthesis: An Efficient Implementation of Fundamental Operating -System Services" -,school="Columbia University" -,address="New York, NY" -,year="1992" -,annotation=" - Mondo optimizing compiler. - Wait-free stuff. - Good advice: defer work to avoid synchronization. -" } @unpublished{Jacobson93 @@ -244,7 +367,13 @@ System Services" ,title="Avoid Read-Side Locking Via Delayed Free" ,year="1993" ,month="September" -,note="Verbal discussion" +,note="private communication" +,annotation={ + Use fixed time delay to approximate grace period. Very simple, + but subject to random memory corruption under heavy load. + . + Independent invention of RCU-like mechanism. +} } @Conference{AjuJohn95 @@ -256,6 +385,17 @@ System Services" ,Year="1995" ,pages="11-23" ,Address="New Orleans, LA" +,note="Available: +\url{https://www.usenix.org/publications/library/proceedings/neworl/full_papers/john.a} +[Viewed October 1, 2010]" +,annotation={ + Age vnodes out of the cache, and have a fixed time set by a kernel + parameter. Not clear that all races were in fact correctly handled. + Used a 20-minute time by default, which would most definitely not + be suitable during DoS attacks or virus scans. + . + Apparently independent invention of RCU-like mechanism. +} } @conference{Pu95a, @@ -301,31 +441,47 @@ Utilizing Execution History and Thread Monitoring" ,institution="US Patent and Trademark Office" ,address="Washington, DC" ,year="1995" -,number="US Patent 5,442,758 (contributed under GPL)" +,number="US Patent 5,442,758" ,month="August" +,annotation={ + Describes the parallel RCU infrastructure. Includes NUMA aspect + (structure of bitmap can reflect bus structure of computer system). + . + Another independent invention of an RCU-like mechanism, but the + "real" RCU this time! +} } @techreport{Slingwine97 ,author="John D. Slingwine and Paul E. McKenney" -,title="Method for maintaining data coherency using thread -activity summaries in a multicomputer system" +,title="Method for Maintaining Data Coherency Using Thread Activity +Summaries in a Multicomputer System" ,institution="US Patent and Trademark Office" ,address="Washington, DC" ,year="1997" -,number="US Patent 5,608,893 (contributed under GPL)" +,number="US Patent 5,608,893" ,month="March" +,pages="19" +,annotation={ + Describes use of RCU to synchronize data between a pair of + SMP/NUMA computer systems. +} } @techreport{Slingwine98 ,author="John D. Slingwine and Paul E. McKenney" -,title="Apparatus and method for achieving reduced overhead -mutual exclusion and maintaining coherency in a multiprocessor -system utilizing execution history and thread monitoring" +,title="Apparatus and Method for Achieving Reduced Overhead Mutual +Exclusion and Maintaining Coherency in a Multiprocessor System +Utilizing Execution History and Thread Monitoring" ,institution="US Patent and Trademark Office" ,address="Washington, DC" ,year="1998" -,number="US Patent 5,727,209 (contributed under GPL)" +,number="US Patent 5,727,209" ,month="March" +,annotation={ + Describes doing an atomic update by copying the data item and + then substituting it into the data structure. +} } @Conference{McKenney98 @@ -337,6 +493,15 @@ Problems" ,Year="1998" ,pages="509-518" ,Address="Las Vegas, NV" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/RCU/rclockpdcsproof.pdf} +[Viewed December 3, 2007]" +,annotation={ + Describes and analyzes RCU mechanism in DYNIX/ptx. Describes + application to linked list update and log-buffer flushing. + Defines 'quiescent state'. Includes both measured and analytic + evaluation. +} } @Conference{Gamsa99 @@ -349,18 +514,76 @@ Operating System Design and Implementation}" ,Year="1999" ,pages="87-100" ,Address="New Orleans, LA" +,note="Available: +\url{http://www.usenix.org/events/osdi99/full_papers/gamsa/gamsa.pdf} +[Viewed August 30, 2006]" +,annotation={ + Use of RCU-like facility in K42/Tornado. Another independent + invention of RCU. + See especially pages 7-9 (Section 5). +} +} + +@unpublished{RustyRussell2000a +,Author="Rusty Russell" +,Title="Re: modular net drivers" +,month="June" +,year="2000" +,day="23" +,note="Available: +\url{http://oss.sgi.com/projects/netdev/archive/2000-06/msg00250.html} +[Viewed April 10, 2006]" +,annotation={ + Proto-RCU proposal from Phil Rumpf and Rusty Russell. + Yet another independent invention of RCU. + Outline of algorithm to unload modules... + . + Appeared on net-dev mailing list. +} +} + +@unpublished{RustyRussell2000b +,Author="Rusty Russell" +,Title="Re: modular net drivers" +,month="June" +,year="2000" +,day="24" +,note="Available: +\url{http://oss.sgi.com/projects/netdev/archive/2000-06/msg00254.html} +[Viewed April 10, 2006]" +,annotation={ + Proto-RCU proposal from Phil Rumpf and Rusty Russell. + . + Appeared on net-dev mailing list. +} +} + +@unpublished{McKenney01b +,Author="Paul E. McKenney and Dipankar Sarma" +,Title="Read-Copy Update Mutual Exclusion in {Linux}" +,month="February" +,year="2001" +,note="Available: +\url{http://lse.sourceforge.net/locking/rcu/rcupdate_doc.html} +[Viewed October 18, 2004]" +,annotation={ + Prototypical Linux documentation for RCU. +} } @techreport{Slingwine01 ,author="John D. Slingwine and Paul E. McKenney" -,title="Apparatus and method for achieving reduced overhead -mutual exclusion and maintaining coherency in a multiprocessor -system utilizing execution history and thread monitoring" +,title="Apparatus and Method for Achieving Reduced Overhead Mutual +Exclusion and Maintaining Coherency in a Multiprocessor System +Utilizing Execution History and Thread Monitoring" ,institution="US Patent and Trademark Office" ,address="Washington, DC" ,year="2001" -,number="US Patent 5,219,690 (contributed under GPL)" +,number="US Patent 6,219,690" ,month="April" +,annotation={ + 'Change in mode' aspect of RCU. Can be thought of as a lazy barrier. +} } @Conference{McKenney01a @@ -372,14 +595,61 @@ Orran Krieger and Rusty Russell and Dipankar Sarma and Maneesh Soni" ,Year="2001" ,note="Available: \url{http://www.linuxsymposium.org/2001/abstracts/readcopy.php} -\url{http://www.rdrop.com/users/paulmck/rclock/rclock_OLS.2001.05.01c.pdf} +\url{http://www.rdrop.com/users/paulmck/RCU/rclock_OLS.2001.05.01c.pdf} [Viewed June 23, 2004]" -annotation=" -Described RCU, and presented some patches implementing and using it in -the Linux kernel. +,annotation={ + Described RCU, and presented some patches implementing and using + it in the Linux kernel. +} +} + +@unpublished{McKenney01f +,Author="Paul E. McKenney" +,Title="{RFC:} patch to allow lock-free traversal of lists with insertion" +,month="October" +,year="2001" +,note="Available: +\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=100259266316456&w=2} +[Viewed June 23, 2004]" +,annotation=" + Memory-barrier and Alpha thread. 100 messages, not too bad... +" +} + +@unpublished{Spraul01 +,Author="Manfred Spraul" +,Title="Re: {RFC:} patch to allow lock-free traversal of lists with insertion" +,month="October" +,year="2001" +,note="Available: +\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=100264675012867&w=2} +[Viewed June 23, 2004]" +,annotation=" + Suggested burying memory barriers in Linux's list-manipulation + primitives. " } +@unpublished{LinusTorvalds2001a +,Author="Linus Torvalds" +,Title="{Re:} {[Lse-tech]} {Re:} {RFC:} patch to allow lock-free traversal of lists with insertion" +,month="October" +,year="2001" +,note="Available: +\url{http://lkml.org/lkml/2001/10/13/105} +[Viewed August 21, 2004]" +} + +@unpublished{Blanchard02a +,Author="Anton Blanchard" +,Title="some RCU dcache and ratcache results" +,month="March" +,year="2002" +,note="Available: +\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=101637107412972&w=2} +[Viewed October 18, 2004]" +} + @Conference{Linder02a ,Author="Hanna Linder and Dipankar Sarma and Maneesh Soni" ,Title="Scalability of the Directory Entry Cache" @@ -387,6 +657,10 @@ the Linux kernel. ,Month="June" ,Year="2002" ,pages="289-300" +,annotation=" + Measured scalability of Linux 2.4 kernel's directory-entry cache + (dcache), and measured some scalability enhancements. +" } @Conference{McKenney02a @@ -400,49 +674,76 @@ Andrea Arcangeli and Andi Kleen and Orran Krieger and Rusty Russell" ,note="Available: \url{http://www.linux.org.uk/~ajh/ols2002_proceedings.pdf.gz} [Viewed June 23, 2004]" +,annotation=" + Presented and compared a number of RCU implementations for the + Linux kernel. +" } -@conference{Michael02a -,author="Maged M. Michael" -,title="Safe Memory Reclamation for Dynamic Lock-Free Objects Using Atomic -Reads and Writes" -,Year="2002" -,Month="August" -,booktitle="{Proceedings of the 21\textsuperscript{st} Annual ACM -Symposium on Principles of Distributed Computing}" -,pages="21-30" +@unpublished{Sarma02a +,Author="Dipankar Sarma" +,Title="specweb99: dcache scalability results" +,month="July" +,year="2002" +,note="Available: +\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=102645767914212&w=2} +[Viewed June 23, 2004]" ,annotation=" - Each thread keeps an array of pointers to items that it is - currently referencing. Sort of an inside-out garbage collection - mechanism, but one that requires the accessing code to explicitly - state its needs. Also requires read-side memory barriers on - most architectures. + Compare fastwalk and RCU for dcache. RCU won. " } -@conference{Michael02b -,author="Maged M. Michael" -,title="High Performance Dynamic Lock-Free Hash Tables and List-Based Sets" -,Year="2002" -,Month="August" -,booktitle="{Proceedings of the 14\textsuperscript{th} Annual ACM -Symposium on Parallel -Algorithms and Architecture}" -,pages="73-82" +@unpublished{Barbieri02 +,Author="Luca Barbieri" +,Title="Re: {[PATCH]} Initial support for struct {vfs\_cred}" +,month="August" +,year="2002" +,note="Available: +\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=103082050621241&w=2} +[Viewed: June 23, 2004]" ,annotation=" - Like the title says... + Suggested RCU for vfs\_shared\_cred. " } -@InProceedings{HerlihyLM02 -,author={Maurice Herlihy and Victor Luchangco and Mark Moir} -,title="The Repeat Offender Problem: A Mechanism for Supporting Dynamic-Sized, -Lock-Free Data Structures" -,booktitle={Proceedings of 16\textsuperscript{th} International -Symposium on Distributed Computing} -,year=2002 +@unpublished{Dickins02a +,author="Hugh Dickins" +,title="Use RCU for System-V IPC" +,year="2002" +,month="October" +,note="private communication" +} + +@unpublished{Sarma02b +,Author="Dipankar Sarma" +,Title="Some dcache\_rcu benchmark numbers" ,month="October" -,pages="339-353" +,year="2002" +,note="Available: +\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=103462075416638&w=2} +[Viewed June 23, 2004]" +,annotation=" + Performance of dcache RCU on kernbench for 16x NUMA-Q and 1x, + 2x, and 4x systems. RCU does no harm, and helps on 16x. +" +} + +@unpublished{LinusTorvalds2003a +,Author="Linus Torvalds" +,Title="Re: {[PATCH]} small fixes in brlock.h" +,month="March" +,year="2003" +,note="Available: +\url{http://lkml.org/lkml/2003/3/9/205} +[Viewed March 13, 2006]" +,annotation=" + Linus suggests replacing brlock with RCU and/or seqlocks: + . + 'It's entirely possible that the current user could be replaced + by RCU and/or seqlocks, and we could get rid of brlocks entirely.' + . + Steve Hemminger responds by replacing them with RCU. +" } @article{Appavoo03a @@ -457,6 +758,20 @@ B. Rosenburg and M. Stumm and J. Xenidis" ,volume="42" ,number="1" ,pages="60-76" +,annotation=" + Use of RCU to enable hot-swapping for autonomic behavior in K42. +" +} + +@unpublished{Seigh03 +,author="Joseph W. {Seigh II}" +,title="Read Copy Update" +,Year="2003" +,Month="March" +,note="email correspondence" +,annotation=" + Described the relationship of the VM/XA passive serialization to RCU. +" } @Conference{Arcangeli03 @@ -470,6 +785,27 @@ Dipankar Sarma" ,year="2003" ,month="June" ,pages="297-310" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/RCU/rcu.FREENIX.2003.06.14.pdf} +[Viewed November 21, 2007]" +,annotation=" + Compared updated RCU implementations for the Linux kernel, and + described System V IPC use of RCU, including order-of-magnitude + performance improvements. +" +} + +@Conference{Soules03a +,Author="Craig A. N. Soules and Jonathan Appavoo and Kevin Hui and +Dilma {Da Silva} and Gregory R. Ganger and Orran Krieger and +Michael Stumm and Robert W. Wisniewski and Marc Auslander and +Michal Ostrowski and Bryan Rosenburg and Jimi Xenidis" +,Title="System Support for Online Reconfiguration" +,Booktitle="Proceedings of the 2003 USENIX Annual Technical Conference" +,Publisher="USENIX Association" +,year="2003" +,month="June" +,pages="141-154" } @article{McKenney03a @@ -481,6 +817,22 @@ Dipankar Sarma" ,volume="1" ,number="114" ,pages="18-26" +,note="Available: +\url{http://www.linuxjournal.com/article/6993} +[Viewed November 14, 2007]" +,annotation=" + Reader-friendly intro to RCU, with the infamous old-man-and-brat + cartoon. +" +} + +@unpublished{Sarma03a +,Author="Dipankar Sarma" +,Title="RCU low latency patches" +,month="December" +,year="2003" +,note="Message ID: 20031222180114.GA2248@in.ibm.com" +,annotation="dipankar/ct.2004.03.27/RCUll.2003.12.22.patch" } @techreport{Friedberg03a @@ -489,9 +841,14 @@ Dipankar Sarma" ,institution="US Patent and Trademark Office" ,address="Washington, DC" ,year="2003" -,number="US Patent 6,662,184 (contributed under GPL)" +,number="US Patent 6,662,184" ,month="December" ,pages="112" +,annotation=" + Applies RCU to a wildcard-search Patricia tree in order to permit + synchronization-free lookup. RCU is used to retain removed nodes + for a grace period before freeing them. +" } @article{McKenney04a @@ -503,6 +860,12 @@ Dipankar Sarma" ,volume="1" ,number="118" ,pages="38-46" +,note="Available: +\url{http://www.linuxjournal.com/node/7124} +[Viewed December 26, 2010]" +,annotation=" + Reader friendly intro to dcache and RCU. +" } @Conference{McKenney04b @@ -514,152 +877,824 @@ Dipankar Sarma" ,Address="Adelaide, Australia" ,note="Available: \url{http://www.linux.org.au/conf/2004/abstracts.html#90} -\url{http://www.rdrop.com/users/paulmck/rclock/lockperf.2004.01.17a.pdf} +\url{http://www.rdrop.com/users/paulmck/RCU/lockperf.2004.01.17a.pdf} [Viewed June 23, 2004]" +,annotation=" + Compares performance of RCU to that of other locking primitives + over a number of CPUs (x86, Opteron, Itanium, and PPC). +" } -@phdthesis{PaulEdwardMcKenneyPhD -,author="Paul E. McKenney" -,title="Exploiting Deferred Destruction: -An Analysis of Read-Copy-Update Techniques -in Operating System Kernels" -,school="OGI School of Science and Engineering at -Oregon Health and Sciences University" +@unpublished{Sarma04a +,Author="Dipankar Sarma" +,Title="{[PATCH]} {RCU} for low latency (experimental)" +,month="March" +,year="2004" +,note="\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=108003746402892&w=2}" +,annotation="Head of thread: dipankar/2004.03.23/rcu-low-lat.1.patch" +} + +@unpublished{Sarma04b +,Author="Dipankar Sarma" +,Title="Re: {[PATCH]} {RCU} for low latency (experimental)" +,month="March" +,year="2004" +,note="\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=108016474829546&w=2}" +,annotation="dipankar/rcuth.2004.03.24/rcu-throttle.patch" +} + +@unpublished{Spraul04a +,Author="Manfred Spraul" +,Title="[RFC] 0/5 rcu lock update" +,month="May" ,year="2004" ,note="Available: -\url{http://www.rdrop.com/users/paulmck/RCU/RCUdissertation.2004.07.14e1.pdf} -[Viewed October 15, 2004]" +\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=108546407726602&w=2} +[Viewed June 23, 2004]" +,annotation=" + Hierarchical-bitmap patch for RCU infrastructure. +" +} + +@unpublished{Steiner04a +,Author="Jack Steiner" +,Title="Re: [Lse-tech] [RFC, PATCH] 1/5 rcu lock update: +Add per-cpu batch counter" +,month="May" +,year="2004" +,note="Available: +\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=108551764515332&w=2} +[Viewed June 23, 2004]" +,annotation={ + RCU runs reasonably on a 512-CPU SGI using Manfred Spraul's patches, + which may be found at: + https://lkml.org/lkml/2004/5/20/49 (split vars into cachelines) + https://lkml.org/lkml/2004/5/22/114 (cpu_quiet() patch) + https://lkml.org/lkml/2004/5/25/24 (0/5) + https://lkml.org/lkml/2004/5/25/23 (1/5) + https://lkml.org/lkml/2004/5/25/265 (works for Jack) + https://lkml.org/lkml/2004/5/25/20 (2/5) + https://lkml.org/lkml/2004/5/25/22 (3/5) + https://lkml.org/lkml/2004/5/25/19 (4/5) + https://lkml.org/lkml/2004/5/25/21 (5/5) +} } @Conference{Sarma04c ,Author="Dipankar Sarma and Paul E. McKenney" -,Title="Making RCU Safe for Deep Sub-Millisecond Response Realtime Applications" +,Title="Making {RCU} Safe for Deep Sub-Millisecond Response +Realtime Applications" ,Booktitle="Proceedings of the 2004 USENIX Annual Technical Conference (FREENIX Track)" ,Publisher="USENIX Association" ,year="2004" ,month="June" ,pages="182-191" +,annotation=" + Describes and compares a number of modifications to the Linux RCU + implementation that make it friendly to realtime applications. +" } -@unpublished{JamesMorris04b -,Author="James Morris" -,Title="Recent Developments in {SELinux} Kernel Performance" -,month="December" +@phdthesis{PaulEdwardMcKenneyPhD +,author="Paul E. McKenney" +,title="Exploiting Deferred Destruction: +An Analysis of Read-Copy-Update Techniques +in Operating System Kernels" +,school="OGI School of Science and Engineering at +Oregon Health and Sciences University" ,year="2004" ,note="Available: -\url{http://www.livejournal.com/users/james_morris/2153.html} -[Viewed December 10, 2004]" +\url{http://www.rdrop.com/users/paulmck/RCU/RCUdissertation.2004.07.14e1.pdf} +[Viewed October 15, 2004]" +,annotation=" + Describes RCU implementations and presents design patterns + corresponding to common uses of RCU in several operating-system + kernels. +" } -@unpublished{PaulMcKenney05a -,Author="Paul E. McKenney" -,Title="{[RFC]} {RCU} and {CONFIG\_PREEMPT\_RT} progress" -,month="May" -,year="2005" +@unpublished{PaulEMcKenney2004rcu:dereference +,Author="Dipankar Sarma" +,Title="{Re: RCU : Abstracted RCU dereferencing [5/5]}" +,month="August" +,year="2004" ,note="Available: -\url{http://lkml.org/lkml/2005/5/9/185} -[Viewed May 13, 2005]" +\url{http://lkml.org/lkml/2004/8/6/237} +[Viewed June 8, 2010]" ,annotation=" - First publication of working lock-based deferred free patches - for the CONFIG_PREEMPT_RT environment. + Introduce rcu_dereference(). " } -@conference{PaulMcKenney05b -,Author="Paul E. McKenney and Dipankar Sarma" -,Title="Towards Hard Realtime Response from the Linux Kernel on SMP Hardware" -,Booktitle="linux.conf.au 2005" -,month="April" -,year="2005" -,address="Canberra, Australia" +@unpublished{JimHouston04a +,Author="Jim Houston" +,Title="{[RFC\&PATCH] Alternative {RCU} implementation}" +,month="August" +,year="2004" ,note="Available: -\url{http://www.rdrop.com/users/paulmck/RCU/realtimeRCU.2005.04.23a.pdf} -[Viewed May 13, 2005]" +\url{http://lkml.org/lkml/2004/8/30/87} +[Viewed February 17, 2005]" ,annotation=" - Realtime turns into making RCU yet more realtime friendly. + Uses active code in rcu_read_lock() and rcu_read_unlock() to + make RCU happen, allowing RCU to function on CPUs that do not + receive a scheduling-clock interrupt. " } -@conference{ThomasEHart2006a -,Author="Thomas E. Hart and Paul E. McKenney and Angela Demke Brown" -,Title="Making Lockless Synchronization Fast: Performance Implications -of Memory Reclamation" -,Booktitle="20\textsuperscript{th} {IEEE} International Parallel and -Distributed Processing Symposium" -,month="April" -,year="2006" -,day="25-29" -,address="Rhodes, Greece" +@unpublished{TomHart04a +,Author="Thomas E. Hart" +,Title="Master's Thesis: Applying Lock-free Techniques to the {Linux} Kernel" +,month="October" +,year="2004" +,note="Available: +\url{http://www.cs.toronto.edu/~tomhart/masters_thesis.html} +[Viewed October 15, 2004]" ,annotation=" - Compares QSBR (AKA "classic RCU"), HPBR, EBR, and lock-free - reference counting. + Proposes comparing RCU to lock-free methods for the Linux kernel. " } -@Conference{PaulEMcKenney2006b -,Author="Paul E. McKenney and Dipankar Sarma and Ingo Molnar and -Suparna Bhattacharya" -,Title="Extending RCU for Realtime and Embedded Workloads" -,Booktitle="{Ottawa Linux Symposium}" -,Month="July" -,Year="2006" -,pages="v2 123-138" +@unpublished{Vaddagiri04a +,Author="Srivatsa Vaddagiri" +,Title="Subject: [RFC] Use RCU for tcp\_ehash lookup" +,month="October" +,year="2004" ,note="Available: -\url{http://www.linuxsymposium.org/2006/index_2006.php} -\url{http://www.rdrop.com/users/paulmck/RCU/OLSrtRCU.2006.08.11a.pdf} -[Viewed January 1, 2007]" +\url{http://marc.theaimsgroup.com/?t=109395731700004&r=1&w=2} +[Viewed October 18, 2004]" ,annotation=" - Described how to improve the -rt implementation of realtime RCU. + Srivatsa's RCU patch for tcp_ehash lookup. " } -@unpublished{PaulEMcKenney2006c -,Author="Paul E. McKenney" -,Title="Sleepable {RCU}" +@unpublished{Thirumalai04a +,Author="Ravikiran Thirumalai" +,Title="Subject: [patchset] Lockfree fd lookup 0 of 5" ,month="October" -,day="9" -,year="2006" +,year="2004" ,note="Available: -\url{http://lwn.net/Articles/202847/} -Revised: -\url{http://www.rdrop.com/users/paulmck/RCU/srcu.2007.01.14a.pdf} -[Viewed August 21, 2006]" +\url{http://marc.theaimsgroup.com/?t=109144217400003&r=1&w=2} +[Viewed October 18, 2004]" ,annotation=" - LWN article introducing SRCU. + Ravikiran's lockfree FD patch. +" +} + +@unpublished{Thirumalai04b +,Author="Ravikiran Thirumalai" +,Title="Subject: Re: [patchset] Lockfree fd lookup 0 of 5" +,month="October" +,year="2004" +,note="Available: +\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=109152521410459&w=2} +[Viewed October 18, 2004]" +,annotation=" + Ravikiran's lockfree FD patch. +" +} + +@unpublished{PaulEMcKenney2004rcu:assign:pointer +,Author="Paul E. McKenney" +,Title="{[PATCH 1/3] RCU: \url{rcu_assign_pointer()} removal of memory barriers}" +,month="October" +,year="2004" +,note="Available: +\url{http://lkml.org/lkml/2004/10/23/241} +[Viewed June 8, 2010]" +,annotation=" + Introduce rcu_assign_pointer(). +" +} + +@unpublished{JamesMorris04a +,Author="James Morris" +,Title="{[PATCH 2/3] SELinux} scalability - convert {AVC} to {RCU}" +,day="15" +,month="November" +,year="2004" +,note="Available: +\url{http://marc.theaimsgroup.com/?l=linux-kernel&m=110054979416004&w=2} +[Viewed December 10, 2004]" +,annotation=" + James Morris posts Kaigai Kohei's patch to LKML. +" +} + +@unpublished{JamesMorris04b +,Author="James Morris" +,Title="Recent Developments in {SELinux} Kernel Performance" +,month="December" +,year="2004" +,note="Available: +\url{http://www.livejournal.com/users/james_morris/2153.html} +[Viewed December 10, 2004]" +,annotation=" + RCU helps SELinux performance. ;-) Made LWN. +" +} + +@unpublished{PaulMcKenney2005RCUSemantics +,Author="Paul E. McKenney and Jonathan Walpole" +,Title="{RCU} Semantics: A First Attempt" +,month="January" +,year="2005" +,day="30" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/RCU/rcu-semantics.2005.01.30a.pdf} +[Viewed December 6, 2009]" +,annotation=" + Early derivation of RCU semantics. +" +} + +@unpublished{PaulMcKenney2005e +,Author="Paul E. McKenney" +,Title="Real-Time Preemption and {RCU}" +,month="March" +,year="2005" +,day="17" +,note="Available: +\url{http://lkml.org/lkml/2005/3/17/199} +[Viewed September 5, 2005]" +,annotation=" + First posting showing how RCU can be safely adapted for + preemptable RCU read side critical sections. +" +} + +@unpublished{EsbenNeilsen2005a +,Author="Esben Neilsen" +,Title="Re: Real-Time Preemption and {RCU}" +,month="March" +,year="2005" +,day="18" +,note="Available: +\url{http://lkml.org/lkml/2005/3/18/122} +[Viewed March 30, 2006]" +,annotation=" + Esben Neilsen suggests read-side suppression of grace-period + processing for crude-but-workable realtime RCU. The downside + is indefinite grace periods...But this is OK for experimentation + and testing. +" +} + +@unpublished{TomHart05a +,Author="Thomas E. Hart and Paul E. McKenney and Angela Demke Brown" +,Title="Efficient Memory Reclamation is Necessary for Fast Lock-Free +Data Structures" +,month="March" +,year="2005" +,note="Available: +\url{ftp://ftp.cs.toronto.edu/csrg-technical-reports/515/} +[Viewed March 4, 2005]" +,annotation=" + Comparison of RCU, QBSR, and EBSR. RCU wins for read-mostly + workloads. ;-) +" +} + +@unpublished{JonCorbet2005DeprecateSyncKernel +,Author="Jonathan Corbet" +,Title="API change: synchronize_kernel() deprecated" +,month="May" +,day="3" +,year="2005" +,note="Available: +\url{http://lwn.net/Articles/134484/} +[Viewed May 3, 2005]" +,annotation=" + Jon Corbet describes deprecation of synchronize_kernel() + in favor of synchronize_rcu() and synchronize_sched(). +" +} + +@unpublished{PaulMcKenney05a +,Author="Paul E. McKenney" +,Title="{[RFC]} {RCU} and {CONFIG\_PREEMPT\_RT} progress" +,month="May" +,year="2005" +,note="Available: +\url{http://lkml.org/lkml/2005/5/9/185} +[Viewed May 13, 2005]" +,annotation=" + First publication of working lock-based deferred free patches + for the CONFIG_PREEMPT_RT environment. +" +} + +@conference{PaulMcKenney05b +,Author="Paul E. McKenney and Dipankar Sarma" +,Title="Towards Hard Realtime Response from the {Linux} Kernel on {SMP} Hardware" +,Booktitle="linux.conf.au 2005" +,month="April" +,year="2005" +,address="Canberra, Australia" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/RCU/realtimeRCU.2005.04.23a.pdf} +[Viewed May 13, 2005]" +,annotation=" + Realtime turns into making RCU yet more realtime friendly. + http://lca2005.linux.org.au/Papers/Paul%20McKenney/Towards%20Hard%20Realtime%20Response%20from%20the%20Linux%20Kernel/LKS.2005.04.22a.pdf +" +} + +@unpublished{PaulEMcKenneyHomePage +,Author="Paul E. McKenney" +,Title="{Paul} {E.} {McKenney}" +,month="May" +,year="2005" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/} +[Viewed May 25, 2005]" +,annotation=" + Paul McKenney's home page. +" +} + +@unpublished{PaulEMcKenneyRCUPage +,Author="Paul E. McKenney" +,Title="Read-Copy Update {(RCU)}" +,month="May" +,year="2005" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/RCU} +[Viewed May 25, 2005]" +,annotation=" + Paul McKenney's RCU page. +" +} + +@unpublished{JosephSeigh2005a +,Author="Joseph Seigh" +,Title="{RCU}+{SMR} (hazard pointers)" +,month="July" +,year="2005" +,note="Personal communication" +,annotation=" + Joe Seigh announcing his atomic-ptr-plus project. + http://sourceforge.net/projects/atomic-ptr-plus/ +" +} + +@unpublished{JosephSeigh2005b +,Author="Joseph Seigh" +,Title="Lock-free synchronization primitives" +,month="July" +,day="6" +,year="2005" +,note="Available: +\url{http://sourceforge.net/projects/atomic-ptr-plus/} +[Viewed August 8, 2005]" +,annotation=" + Joe Seigh's atomic-ptr-plus project. +" +} + +@unpublished{PaulMcKenney2005c +,Author="Paul E.McKenney" +,Title="{[RFC,PATCH] RCU} and {CONFIG\_PREEMPT\_RT} sane patch" +,month="August" +,day="1" +,year="2005" +,note="Available: +\url{http://lkml.org/lkml/2005/8/1/155} +[Viewed March 14, 2006]" +,annotation=" + First operating counter-based realtime RCU patch posted to LKML. +" +} + +@unpublished{PaulMcKenney2005d +,Author="Paul E. McKenney" +,Title="Re: [Fwd: Re: [patch] Real-Time Preemption, -RT-2.6.13-rc4-V0.7.52-01]" +,month="August" +,day="8" +,year="2005" +,note="Available: +\url{http://lkml.org/lkml/2005/8/8/108} +[Viewed March 14, 2006]" +,annotation=" + First operating counter-based realtime RCU patch posted to LKML, + but fixed so that various unusual combinations of configuration + parameters all function properly. +" +} + +@unpublished{PaulMcKenney2005rcutorture +,Author="Paul E. McKenney" +,Title="{[PATCH]} {RCU} torture testing" +,month="October" +,day="1" +,year="2005" +,note="Available: +\url{http://lkml.org/lkml/2005/10/1/70} +[Viewed March 14, 2006]" +,annotation=" + First rcutorture patch. +" +} + +@conference{ThomasEHart2006a +,Author="Thomas E. Hart and Paul E. McKenney and Angela Demke Brown" +,Title="Making Lockless Synchronization Fast: Performance Implications +of Memory Reclamation" +,Booktitle="20\textsuperscript{th} {IEEE} International Parallel and +Distributed Processing Symposium" +,month="April" +,year="2006" +,day="25-29" +,address="Rhodes, Greece" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/RCU/hart_ipdps06.pdf} +[Viewed April 28, 2008]" +,annotation=" + Compares QSBR, HPBR, EBR, and lock-free reference counting. + http://www.cs.toronto.edu/~tomhart/perflab/ipdps06.tgz +" +} + +@unpublished{NickPiggin2006radixtree +,Author="Nick Piggin" +,Title="[patch 3/3] radix-tree: {RCU} lockless readside" +,month="June" +,day="20" +,year="2006" +,note="Available: +\url{http://lkml.org/lkml/2006/6/20/238} +[Viewed March 25, 2008]" +,annotation=" + RCU-protected radix tree. +" +} + +@Conference{PaulEMcKenney2006b +,Author="Paul E. McKenney and Dipankar Sarma and Ingo Molnar and +Suparna Bhattacharya" +,Title="Extending {RCU} for Realtime and Embedded Workloads" +,Booktitle="{Ottawa Linux Symposium}" +,Month="July" +,Year="2006" +,pages="v2 123-138" +,note="Available: +\url{http://www.linuxsymposium.org/2006/view_abstract.php?content_key=184} +\url{http://www.rdrop.com/users/paulmck/RCU/OLSrtRCU.2006.08.11a.pdf} +[Viewed January 1, 2007]" +,annotation=" + Described how to improve the -rt implementation of realtime RCU. +" +} + +@unpublished{WikipediaRCU +,Author="Paul E. McKenney and Chris Purcell and Algae and Ben Schumin and +Gaius Cornelius and Qwertyus and Neil Conway and Sbw and Blainster and +Canis Rufus and Zoicon5 and Anome and Hal Eisen" +,Title="Read-Copy Update" +,month="July" +,day="8" +,year="2006" +,note="Available: +\url{http://en.wikipedia.org/wiki/Read-copy-update} +[Viewed August 21, 2006]" +,annotation=" + Wikipedia RCU page as of July 8 2006. +" +} + +@Conference{NickPiggin2006LocklessPageCache +,Author="Nick Piggin" +,Title="A Lockless Pagecache in Linux---Introduction, Progress, Performance" +,Booktitle="{Ottawa Linux Symposium}" +,Month="July" +,Year="2006" +,pages="v2 249-254" +,note="Available: +\url{http://www.linuxsymposium.org/2006/view_abstract.php?content_key=184} +[Viewed January 11, 2009]" +,annotation=" + Uses RCU-protected radix tree for a lockless page cache. +" +} + +@unpublished{PaulEMcKenney2006c +,Author="Paul E. McKenney" +,Title="Sleepable {RCU}" +,month="October" +,day="9" +,year="2006" +,note="Available: +\url{http://lwn.net/Articles/202847/} +Revised: +\url{http://www.rdrop.com/users/paulmck/RCU/srcu.2007.01.14a.pdf} +[Viewed August 21, 2006]" +,annotation=" + LWN article introducing SRCU. " } @unpublished{RobertOlsson2006a ,Author="Robert Olsson and Stefan Nilsson" ,Title="{TRASH}: A dynamic {LC}-trie and hash data structure" -,month="August" -,day="18" -,year="2006" +,month="August" +,day="18" +,year="2006" +,note="Available: +\url{http://www.nada.kth.se/~snilsson/publications/TRASH/trash.pdf} +[Viewed March 4, 2011]" +,annotation=" + RCU-protected dynamic trie-hash combination. +" +} + +@unpublished{ChristophHellwig2006RCU2SRCU +,Author="Christoph Hellwig" +,Title="Re: {[-mm PATCH 1/4]} {RCU}: split classic rcu" +,month="September" +,day="28" +,year="2006" +,note="Available: +\url{http://lkml.org/lkml/2006/9/28/160} +[Viewed March 27, 2008]" +} + +@unpublished{PaulEMcKenneyRCUusagePage +,Author="Paul E. McKenney" +,Title="{RCU} {Linux} Usage" +,month="October" +,year="2006" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/RCU/linuxusage.html} +[Viewed January 14, 2007]" +,annotation=" + Paul McKenney's RCU page showing graphs plotting Linux-kernel + usage of RCU. +" +} + +@unpublished{PaulEMcKenneyRCUusageRawDataPage +,Author="Paul E. McKenney" +,Title="Read-Copy Update {(RCU)} Usage in {Linux} Kernel" +,month="October" +,year="2006" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/RCU/linuxusage/rculocktab.html} +[Viewed January 14, 2007]" +,annotation=" + Paul McKenney's RCU page showing Linux usage of RCU in tabular + form, with links to corresponding cscope databases. +" +} + +@unpublished{GauthamShenoy2006RCUrwlock +,Author="Gautham R. Shenoy" +,Title="[PATCH 4/5] lock\_cpu\_hotplug: Redesign - Lightweight implementation of lock\_cpu\_hotplug" +,month="October" +,year="2006" +,day=26 +,note="Available: +\url{http://lkml.org/lkml/2006/10/26/73} +[Viewed January 26, 2009]" +,annotation=" + RCU-based reader-writer lock that allows readers to proceed with + no memory barriers or atomic instruction in absence of writers. + If writer do show up, readers must of course wait as required by + the semantics of reader-writer locking. This is a recursive + lock. +" +} + +@unpublished{JensAxboe2006SlowSRCU +,Author="Jens Axboe" +,Title="Re: [patch] cpufreq: mark \url{cpufreq_tsc()} as +\url{core_initcall_sync}" +,month="November" +,year="2006" +,day=17 +,note="Available: +\url{http://lkml.org/lkml/2006/11/17/56} +[Viewed May 28, 2007]" +,annotation=" + SRCU's grace periods are too slow for Jens, even after a + factor-of-three speedup. + Sped-up version of SRCU at http://lkml.org/lkml/2006/11/17/359. +" +} + +@unpublished{OlegNesterov2006QRCU +,Author="Oleg Nesterov" +,Title="Re: [patch] cpufreq: mark {\tt cpufreq\_tsc()} as +{\tt core\_initcall\_sync}" +,month="November" +,year="2006" +,day=19 +,note="Available: +\url{http://lkml.org/lkml/2006/11/19/69} +[Viewed May 28, 2007]" +,annotation=" + First cut of QRCU. Expanded/corrected versions followed. + Used to be OlegNesterov2007QRCU, now time-corrected. +" +} + +@unpublished{OlegNesterov2006aQRCU +,Author="Oleg Nesterov" +,Title="Re: [RFC, PATCH 1/2] qrcu: {"quick"} srcu implementation" +,month="November" +,year="2006" +,day=30 +,note="Available: +\url{http://lkml.org/lkml/2006/11/29/330} +[Viewed November 26, 2008]" +,annotation=" + Expanded/corrected version of QRCU. + Used to be OlegNesterov2007aQRCU, now time-corrected. +" +} + +@unpublished{EvgeniyPolyakov2006RCUslowdown +,Author="Evgeniy Polyakov" +,Title="Badness in postponing work" +,month="December" +,year="2006" +,day=05 +,note="Available: +\url{http://www.ioremap.net/node/41} +[Viewed October 28, 2008]" +,annotation=" + Using RCU as a pure delay leads to a 2.5x slowdown in skbs in + the Linux kernel. +" +} + +@inproceedings{ChrisMatthews2006ClusteredObjectsRCU +,author = {Matthews, Chris and Coady, Yvonne and Appavoo, Jonathan} +,title = {Portability events: a programming model for scalable system infrastructures} +,booktitle = {PLOS '06: Proceedings of the 3rd workshop on Programming languages and operating systems} +,year = {2006} +,isbn = {1-59593-577-0} +,pages = {11} +,location = {San Jose, California} +,doi = {http://doi.acm.org/10.1145/1215995.1216006} +,publisher = {ACM} +,address = {New York, NY, USA} +,annotation={ + Uses K42's RCU-like functionality to manage clustered-object + lifetimes. +}} + +@article{DilmaDaSilva2006K42 +,author = {Silva, Dilma Da and Krieger, Orran and Wisniewski, Robert W. and Waterland, Amos and Tam, David and Baumann, Andrew} +,title = {K42: an infrastructure for operating system research} +,journal = {SIGOPS Oper. Syst. Rev.} +,volume = {40} +,number = {2} +,year = {2006} +,issn = {0163-5980} +,pages = {34--42} +,doi = {http://doi.acm.org/10.1145/1131322.1131333} +,publisher = {ACM} +,address = {New York, NY, USA} +,annotation={ + Describes relationship of K42 generations to RCU. +}} + +# CoreyMinyard2007list_splice_rcu +@unpublished{CoreyMinyard2007list:splice:rcu +,Author="Corey Minyard and Paul E. McKenney" +,Title="{[PATCH]} add an {RCU} version of list splicing" +,month="January" +,year="2007" +,day=3 +,note="Available: +\url{http://lkml.org/lkml/2007/1/3/112} +[Viewed May 28, 2007]" +,annotation=" + Patch for list_splice_rcu(). +" +} + +@unpublished{PaulEMcKenney2007rcubarrier +,Author="Paul E. McKenney" +,Title="{RCU} and Unloadable Modules" +,month="January" +,day="14" +,year="2007" +,note="Available: +\url{http://lwn.net/Articles/217484/} +[Viewed November 22, 2007]" +,annotation=" + LWN article introducing the rcu_barrier() primitive. +" +} + +@unpublished{PeterZijlstra2007SyncBarrier +,Author="Peter Zijlstra and Ingo Molnar" +,Title="{[PATCH 3/7]} barrier: a scalable synchonisation barrier" +,month="January" +,year="2007" +,day=28 +,note="Available: +\url{http://lkml.org/lkml/2007/1/28/34} +[Viewed March 27, 2008]" +,annotation=" + RCU-like implementation for frequent updaters and rare readers(!). + Subsumed into QRCU. Maybe... +" +} + +@unpublished{PaulEMcKenney2007BoostRCU +,Author="Paul E. McKenney" +,Title="Priority-Boosting {RCU} Read-Side Critical Sections" +,month="February" +,day="5" +,year="2007" +,note="Available: +\url{http://lwn.net/Articles/220677/} +Revised: +\url{http://www.rdrop.com/users/paulmck/RCU/RCUbooststate.2007.04.16a.pdf} +[Viewed September 7, 2007]" +,annotation=" + LWN article introducing RCU priority boosting. +" +} + +@unpublished{PaulMcKenney2007QRCUpatch +,Author="Paul E. McKenney" +,Title="{[PATCH]} {QRCU} with lockless fastpath" +,month="February" +,year="2007" +,day=24 +,note="Available: +\url{http://lkml.org/lkml/2007/2/25/18} +[Viewed March 27, 2008]" +,annotation=" + Patch for QRCU supplying lock-free fast path. +" +} + +@article{JonathanAppavoo2007K42RCU +,author = {Appavoo, Jonathan and Silva, Dilma Da and Krieger, Orran and Auslander, Marc and Ostrowski, Michal and Rosenburg, Bryan and Waterland, Amos and Wisniewski, Robert W. and Xenidis, Jimi and Stumm, Michael and Soares, Livio} +,title = {Experience distributing objects in an SMMP OS} +,journal = {ACM Trans. Comput. Syst.} +,volume = {25} +,number = {3} +,year = {2007} +,issn = {0734-2071} +,pages = {6/1--6/52} +,doi = {http://doi.acm.org/10.1145/1275517.1275518} +,publisher = {ACM} +,address = {New York, NY, USA} +,annotation={ + Role of RCU in K42. +}} + +@conference{RobertOlsson2007Trash +,Author="Robert Olsson and Stefan Nilsson" +,Title="{TRASH}: A dynamic {LC}-trie and hash data structure" +,booktitle="Workshop on High Performance Switching and Routing (HPSR'07)" +,month="May" +,year="2007" ,note="Available: -\url{http://www.nada.kth.se/~snilsson/public/papers/trash/trash.pdf} -[Viewed February 24, 2007]" +\url{http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=4281239} +[Viewed October 1, 2010]" ,annotation=" RCU-protected dynamic trie-hash combination. " } -@unpublished{ThomasEHart2007a -,Author="Thomas E. Hart and Paul E. McKenney and Angela Demke Brown and Jonathan Walpole" -,Title="Performance of memory reclamation for lockless synchronization" -,journal="J. Parallel Distrib. Comput." +@conference{PeterZijlstra2007ConcurrentPagecacheRCU +,Author="Peter Zijlstra" +,Title="Concurrent Pagecache" +,Booktitle="Linux Symposium" +,month="June" +,year="2007" +,address="Ottawa, Canada" +,note="Available: +\url{http://ols.108.redhat.com/2007/Reprints/zijlstra-Reprint.pdf} +[Viewed April 14, 2008]" +,annotation=" + Page-cache modifications permitting RCU readers and concurrent + updates. +" +} + +@unpublished{PaulEMcKenney2007whatisRCU +,Author="Paul E. McKenney" +,Title="What is {RCU}?" ,year="2007" -,note="To appear in J. Parallel Distrib. Comput. - \url{doi=10.1016/j.jpdc.2007.04.010}" +,month="07" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/RCU/whatisRCU.html} +[Viewed July 6, 2007]" ,annotation={ - Compares QSBR (AKA "classic RCU"), HPBR, EBR, and lock-free - reference counting. Journal version of ThomasEHart2006a. + Describes RCU in Linux kernel. } } @unpublished{PaulEMcKenney2007QRCUspin ,Author="Paul E. McKenney" -,Title="Using Promela and Spin to verify parallel algorithms" +,Title="Using {Promela} and {Spin} to verify parallel algorithms" ,month="August" ,day="1" ,year="2007" @@ -669,6 +1704,50 @@ Revised: ,annotation=" LWN article describing Promela and spin, and also using Oleg Nesterov's QRCU as an example (with Paul McKenney's fastpath). + Merged patch at: http://lkml.org/lkml/2007/2/25/18 +" +} + +@unpublished{PaulEMcKenney2007WG21DDOatomics +,Author="Paul E. McKenney and Hans-J. Boehm and Lawrence Crowl" +,Title="C++ Data-Dependency Ordering: Atomics and Memory Model" +,month="August" +,day="3" +,year="2007" +,note="Preprint: +\url{http://open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2664.htm} +[Viewed December 7, 2009]" +,annotation=" + RCU for C++, parts 1 and 2. +" +} + +@unpublished{PaulEMcKenney2007WG21DDOannotation +,Author="Paul E. McKenney and Lawrence Crowl" +,Title="C++ Data-Dependency Ordering: Function Annotation" +,month="September" +,day="18" +,year="2008" +,note="Preprint: +\url{http://open-std.org/jtc1/sc22/wg21/docs/papers/2008/n2782.htm} +[Viewed December 7, 2009]" +,annotation=" + RCU for C++, part 2, updated many times. +" +} + +@unpublished{PaulEMcKenney2007PreemptibleRCUPatch +,Author="Paul E. McKenney" +,Title="[PATCH RFC 0/9] {RCU}: Preemptible {RCU}" +,month="September" +,day="10" +,year="2007" +,note="Available: +\url{http://lkml.org/lkml/2007/9/10/213} +[Viewed October 25, 2007]" +,annotation=" + Final patch for preemptable RCU to -rt. (Later patches were + to mainline, eventually incorporated.) " } @@ -686,10 +1765,46 @@ Revised: " } +@article{ThomasEHart2007a +,Author="Thomas E. Hart and Paul E. McKenney and Angela Demke Brown and Jonathan Walpole" +,Title="Performance of memory reclamation for lockless synchronization" +,journal="J. Parallel Distrib. Comput." +,volume={67} +,number="12" +,year="2007" +,issn="0743-7315" +,pages="1270--1285" +,doi="http://dx.doi.org/10.1016/j.jpdc.2007.04.010" +,publisher="Academic Press, Inc." +,address="Orlando, FL, USA" +,annotation={ + Compares QSBR, HPBR, EBR, and lock-free reference counting. + Journal version of ThomasEHart2006a. +} +} + +@unpublished{MathieuDesnoyers2007call:rcu:schedNeeded +,Author="Mathieu Desnoyers" +,Title="Re: [patch 1/2] {Linux} Kernel Markers - Support Multiple Probes" +,month="December" +,day="20" +,year="2007" +,note="Available: +\url{http://lkml.org/lkml/2007/12/20/244} +[Viewed March 27, 2008]" +,annotation=" + Request for call_rcu_sched() and rcu_barrier_sched(). +" +} + + ######################################################################## # # "What is RCU?" LWN series. # +# http://lwn.net/Articles/262464/ (What is RCU, Fundamentally?) +# http://lwn.net/Articles/263130/ (What is RCU's Usage?) +# http://lwn.net/Articles/264090/ (What is RCU's API?) @unpublished{PaulEMcKenney2007WhatIsRCUFundamentally ,Author="Paul E. McKenney and Jonathan Walpole" @@ -723,7 +1838,7 @@ Revised: 3. RCU is a Bulk Reference-Counting Mechanism 4. RCU is a Poor Man's Garbage Collector 5. RCU is a Way of Providing Existence Guarantees - 6. RCU is a Way of Waiting for Things to Finish + 6. RCU is a Way of Waiting for Things to Finish " } @@ -747,20 +1862,96 @@ Revised: # ######################################################################## + +@unpublished{SteveRostedt2008dyntickRCUpatch +,Author="Steven Rostedt and Paul E. McKenney" +,Title="{[PATCH]} add support for dynamic ticks and preempt rcu" +,month="January" +,day="29" +,year="2008" +,note="Available: +\url{http://lkml.org/lkml/2008/1/29/208} +[Viewed March 27, 2008]" +,annotation=" + Patch that prevents preemptible RCU from unnecessarily waking + up dynticks-idle CPUs. +" +} + +@unpublished{PaulEMcKenney2008LKMLDependencyOrdering +,Author="Paul E. McKenney" +,Title="Re: [PATCH 02/22 -v7] Add basic support for gcc profiler instrumentation" +,month="February" +,day="1" +,year="2008" +,note="Available: +\url{http://lkml.org/lkml/2008/2/2/255} +[Viewed October 18, 2008]" +,annotation=" + Explanation of compilers violating dependency ordering. +" +} + +@Conference{PaulEMcKenney2008Beijing +,Author="Paul E. McKenney" +,Title="Introducing Technology Into {Linux} Or: +Introducing your technology Into {Linux} will require introducing a +lot of {Linux} into your technology!!!" +,Booktitle="2008 Linux Developer Symposium - China" +,Publisher="OSS China" +,Month="February" +,Year="2008" +,Address="Beijing, China" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/RCU/TechIntroLinux.2008.02.19a.pdf} +[Viewed August 12, 2008]" +} + +@unpublished{PaulEMcKenney2008dynticksRCU +,Author="Paul E. McKenney and Steven Rostedt" +,Title="Integrating and Validating dynticks and Preemptable RCU" +,month="April" +,day="24" +,year="2008" +,note="Available: +\url{http://lwn.net/Articles/279077/} +[Viewed April 24, 2008]" +,annotation=" + Describes use of Promela and Spin to validate (and fix!) the + dynticks/RCU interface. +" +} + @article{DinakarGuniguntala2008IBMSysJ ,author="D. Guniguntala and P. E. McKenney and J. Triplett and J. Walpole" ,title="The read-copy-update mechanism for supporting real-time applications on shared-memory multiprocessor systems with {Linux}" ,Year="2008" -,Month="April" +,Month="April-June" ,journal="IBM Systems Journal" ,volume="47" ,number="2" -,pages="@@-@@" +,pages="221-236" ,annotation=" RCU, realtime RCU, sleepable RCU, performance. " } +@unpublished{LaiJiangshan2008NewClassicAlgorithm +,Author="Lai Jiangshan" +,Title="[{RFC}][{PATCH}] rcu classic: new algorithm for callbacks-processing" +,month="June" +,day="3" +,year="2008" +,note="Available: +\url{http://lkml.org/lkml/2008/6/2/539} +[Viewed December 10, 2008]" +,annotation=" + Updated RCU classic algorithm. Introduced multi-tailed list + for RCU callbacks and also pulling common code into + __call_rcu(). +" +} + @article{PaulEMcKenney2008RCUOSR ,author="Paul E. McKenney and Jonathan Walpole" ,title="Introducing technology into the {Linux} kernel: a case study" @@ -778,6 +1969,52 @@ Revised: } } +@unpublished{ManfredSpraul2008StateMachineRCU +,Author="Manfred Spraul" +,Title="[{RFC}, {PATCH}] state machine based rcu" +,month="August" +,day="21" +,year="2008" +,note="Available: +\url{http://lkml.org/lkml/2008/8/21/336} +[Viewed December 8, 2008]" +,annotation=" + State-based RCU. One key thing that this patch does is to + separate the dynticks handling of NMIs and IRQs. +" +} + +@unpublished{ManfredSpraul2008dyntickIRQNMI +,Author="Manfred Spraul" +,Title="Re: [{RFC}, {PATCH}] v4 scalable classic {RCU} implementation" +,month="September" +,day="6" +,year="2008" +,note="Available: +\url{http://lkml.org/lkml/2008/9/6/86} +[Viewed December 8, 2008]" +,annotation=" + Manfred notes a fix required to my attempt to separate irq + and NMI processing for hierarchical RCU's dynticks interface. +" +} + +@techreport{PaulEMcKenney2008cyclicRCU +,author="Paul E. McKenney" +,title="Efficient Support of Consistent Cyclic Search With Read-Copy Update" +,institution="US Patent and Trademark Office" +,address="Washington, DC" +,year="2008" +,number="US Patent 7,426,511" +,month="September" +,pages="23" +,annotation=" + Maintains an additional level of indirection to allow + readers to confine themselves to the desired snapshot of the + data structure. Only permits one update at a time. +" +} + @unpublished{PaulEMcKenney2008HierarchicalRCU ,Author="Paul E. McKenney" ,Title="Hierarchical {RCU}" @@ -793,6 +2030,21 @@ Revised: " } +@unpublished{PaulEMcKenney2009BloatwatchRCU +,Author="Paul E. McKenney" +,Title="Re: [PATCH fyi] RCU: the bloatwatch edition" +,month="January" +,day="14" +,year="2009" +,note="Available: +\url{http://lkml.org/lkml/2009/1/14/449} +[Viewed January 15, 2009]" +,annotation=" + Small-footprint implementation of RCU for uniprocessor + embedded applications -- and also for exposition purposes. +" +} + @conference{PaulEMcKenney2009MaliciousURCU ,Author="Paul E. McKenney" ,Title="Using a Malicious User-Level {RCU} to Torture {RCU}-Based Algorithms" @@ -816,15 +2068,17 @@ Revised: ,year="2009" ,note="Available: \url{http://lkml.org/lkml/2009/2/5/572} -\url{git://lttng.org/userspace-rcu.git} +\url{http://lttng.org/urcu} [Viewed February 20, 2009]" ,annotation=" Mathieu Desnoyers's user-space RCU implementation. git://lttng.org/userspace-rcu.git + http://lttng.org/cgi-bin/gitweb.cgi?p=userspace-rcu.git + http://lttng.org/urcu " } -@unpublished{PaulEMcKenney2009BloatWatchRCU +@unpublished{PaulEMcKenney2009LWNBloatWatchRCU ,Author="Paul E. McKenney" ,Title="{RCU}: The {Bloatwatch} Edition" ,month="March" @@ -852,14 +2106,29 @@ Revised: " } -@unpublished{JoshTriplett2009RPHash +@unpublished{PaulEMcKenney2009fastRTRCU +,Author="Paul E. McKenney" +,Title="[{PATCH} {RFC} -tip 0/4] {RCU} cleanups and simplified preemptable {RCU}" +,month="July" +,day="23" +,year="2009" +,note="Available: +\url{http://lkml.org/lkml/2009/7/23/294} +[Viewed August 15, 2009]" +,annotation=" + First posting of simple and fast preemptable RCU. +" +} + +@InProceedings{JoshTriplett2009RPHash ,Author="Josh Triplett" ,Title="Scalable concurrent hash tables via relativistic programming" ,month="September" ,year="2009" -,note="Linux Plumbers Conference presentation" +,booktitle="Linux Plumbers Conference 2009" ,annotation=" RP fun with hash tables. + See also JoshTriplett2010RPHash " } @@ -872,4 +2141,323 @@ Revised: ,note="Available: \url{http://www.lttng.org/pub/thesis/desnoyers-dissertation-2009-12.pdf} [Viewed December 9, 2009]" +,annotation={ + Chapter 6 (page 97) covers user-level RCU. +} +} + +@unpublished{RelativisticProgrammingWiki +,Author="Josh Triplett and Paul E. McKenney and Jonathan Walpole" +,Title="Relativistic Programming" +,month="September" +,year="2009" +,note="Available: +\url{http://wiki.cs.pdx.edu/rp/} +[Viewed December 9, 2009]" +,annotation=" + Main Relativistic Programming Wiki. +" +} + +@conference{PaulEMcKenney2009DeterministicRCU +,Author="Paul E. McKenney" +,Title="Deterministic Synchronization in Multicore Systems: the Role of {RCU}" +,Booktitle="Eleventh Real Time Linux Workshop" +,month="September" +,year="2009" +,address="Dresden, Germany" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/realtime/paper/DetSyncRCU.2009.08.18a.pdf} +[Viewed January 14, 2009]" +} + +@unpublished{PaulEMcKenney2009HuntingHeisenbugs +,Author="Paul E. McKenney" +,Title="Hunting Heisenbugs" +,month="November" +,year="2009" +,day="1" +,note="Available: +\url{http://paulmck.livejournal.com/14639.html} +[Viewed June 4, 2010]" +,annotation=" + Day-one bug in Tree RCU that took forever to track down. +" +} + +@unpublished{MathieuDesnoyers2009defer:rcu +,Author="Mathieu Desnoyers" +,Title="Kernel RCU: shrink the size of the struct rcu\_head" +,month="December" +,year="2009" +,note="Available: +\url{http://lkml.org/lkml/2009/10/18/129} +[Viewed December 29, 2009]" +,annotation=" + Mathieu proposed defer_rcu() with fixed-size per-thread pool + of RCU callbacks. +" +} + +@unpublished{MathieuDesnoyers2009VerifPrePub +,Author="Mathieu Desnoyers and Paul E. McKenney and Michel R. Dagenais" +,Title="Multi-Core Systems Modeling for Formal Verification of Parallel Algorithms" +,month="December" +,year="2009" +,note="Submitted to IEEE TPDS" +,annotation=" + OOMem model for Mathieu's user-level RCU mechanical proof of + correctness. +" +} + +@unpublished{MathieuDesnoyers2009URCUPrePub +,Author="Mathieu Desnoyers and Paul E. McKenney and Alan Stern and Michel R. Dagenais and Jonathan Walpole" +,Title="User-Level Implementations of Read-Copy Update" +,month="December" +,year="2010" +,url=\url{http://www.computer.org/csdl/trans/td/2012/02/ttd2012020375-abs.html} +,annotation=" + RCU overview, desiderata, semi-formal semantics, user-level RCU + usage scenarios, three classes of RCU implementation, wait-free + RCU updates, RCU grace-period batching, update overhead, + http://www.rdrop.com/users/paulmck/RCU/urcu-main-accepted.2011.08.30a.pdf + http://www.rdrop.com/users/paulmck/RCU/urcu-supp-accepted.2011.08.30a.pdf + Superseded by MathieuDesnoyers2012URCU. +" +} + +@inproceedings{HariKannan2009DynamicAnalysisRCU +,author = {Kannan, Hari} +,title = {Ordering decoupled metadata accesses in multiprocessors} +,booktitle = {MICRO 42: Proceedings of the 42nd Annual IEEE/ACM International Symposium on Microarchitecture} +,year = {2009} +,isbn = {978-1-60558-798-1} +,pages = {381--390} +,location = {New York, New York} +,doi = {http://doi.acm.org/10.1145/1669112.1669161} +,publisher = {ACM} +,address = {New York, NY, USA} +,annotation={ + Uses RCU to protect metadata used in dynamic analysis. +}} + +@conference{PaulEMcKenney2010SimpleOptRCU +,Author="Paul E. McKenney" +,Title="Simplicity Through Optimization" +,Booktitle="linux.conf.au 2010" +,month="January" +,year="2010" +,address="Wellington, New Zealand" +,note="Available: +\url{http://www.rdrop.com/users/paulmck/RCU/SimplicityThruOptimization.2010.01.21f.pdf} +[Viewed October 10, 2010]" +,annotation=" + TREE_PREEMPT_RCU optimizations greatly simplified the old + PREEMPT_RCU implementation. +" +} + +@unpublished{PaulEMcKenney2010LockdepRCU +,Author="Paul E. McKenney" +,Title="Lockdep-{RCU}" +,month="February" +,year="2010" +,day="1" +,note="Available: +\url{https://lwn.net/Articles/371986/} +[Viewed June 4, 2010]" +,annotation=" + CONFIG_PROVE_RCU, or at least an early version. +" +} + +@unpublished{AviKivity2010KVM2RCU +,Author="Avi Kivity" +,Title="[{PATCH} 37/40] {KVM}: Bump maximum vcpu count to 64" +,month="February" +,year="2010" +,note="Available: +\url{http://www.mail-archive.com/kvm@vger.kernel.org/msg28640.html} +[Viewed March 20, 2010]" +,annotation=" + Use of RCU permits KVM to increase the size of guest OSes from + 16 CPUs to 64 CPUs. +" +} + +@unpublished{HerbertXu2010RCUResizeHash +,Author="Herbert Xu" +,Title="bridge: Add core IGMP snooping support" +,month="February" +,year="2010" +,note="Available: +\url{http://kerneltrap.com/mailarchive/linux-netdev/2010/2/26/6270589} +[Viewed March 20, 2011]" +,annotation={ + Use a pair of list_head structures to support RCU-protected + resizable hash tables. +}} + +@article{JoshTriplett2010RPHash +,author="Josh Triplett and Paul E. McKenney and Jonathan Walpole" +,title="Scalable Concurrent Hash Tables via Relativistic Programming" +,journal="ACM Operating Systems Review" +,year=2010 +,volume=44 +,number=3 +,month="July" +,annotation={ + RP fun with hash tables. + http://portal.acm.org/citation.cfm?id=1842733.1842750 +}} + +@unpublished{PaulEMcKenney2010RCUAPI +,Author="Paul E. McKenney" +,Title="The {RCU} {API}, 2010 Edition" +,month="December" +,day="8" +,year="2010" +,note="Available: +\url{http://lwn.net/Articles/418853/} +[Viewed December 8, 2010]" +,annotation=" + Includes updated software-engineering features. +" +} + +@mastersthesis{AndrejPodzimek2010masters +,author="Andrej Podzimek" +,title="Read-Copy-Update for OpenSolaris" +,school="Charles University in Prague" +,year="2010" +,note="Available: +\url{https://andrej.podzimek.org/thesis.pdf} +[Viewed January 31, 2011]" +,annotation={ + Reviews RCU implementations and creates a few for OpenSolaris. + Drives quiescent-state detection from RCU read-side primitives, + in a manner roughly similar to that of Jim Houston. +}} + +@unpublished{LinusTorvalds2011Linux2:6:38:rc1:NPigginVFS +,Author="Linus Torvalds" +,Title="Linux 2.6.38-rc1" +,month="January" +,year="2011" +,note="Available: +\url{https://lkml.org/lkml/2011/1/18/322} +[Viewed March 4, 2011]" +,annotation={ + "The RCU-based name lookup is at the other end of the spectrum - the + absolute anti-gimmick. It's some seriously good stuff, and gets rid of + the last main global lock that really tends to hurt some kernel loads. + The dentry lock is no longer a big serializing issue. What's really + nice about it is that it actually improves performance a lot even for + single-threaded loads (on an SMP kernel), because it gets rid of some + of the most expensive parts of path component lookup, which was the + d_lock on every component lookup. So I'm seeing improvements of 30-50% + on some seriously pathname-lookup intensive loads." +}} + +@techreport{JoshTriplett2011RPScalableCorrectOrdering +,author = {Josh Triplett and Philip W. Howard and Paul E. McKenney and Jonathan Walpole} +,title = {Scalable Correct Memory Ordering via Relativistic Programming} +,year = {2011} +,number = {11-03} +,institution = {Portland State University} +,note = {\url{http://www.cs.pdx.edu/pdfs/tr1103.pdf}} +} + +@inproceedings{PhilHoward2011RCUTMRBTree +,author = {Philip W. Howard and Jonathan Walpole} +,title = {A Relativistic Enhancement to Software Transactional Memory} +,booktitle = {Proceedings of the 3rd USENIX conference on Hot topics in parallelism} +,series = {HotPar'11} +,year = {2011} +,location = {Berkeley, CA} +,pages = {1--6} +,numpages = {6} +,url = {http://www.usenix.org/event/hotpar11/tech/final_files/Howard.pdf} +,publisher = {USENIX Association} +,address = {Berkeley, CA, USA} +} + +@techreport{PaulEMcKenney2011cyclicparallelRCU +,author="Paul E. McKenney and Jonathan Walpole" +,title="Efficient Support of Consistent Cyclic Search With Read-Copy Update and Parallel Updates" +,institution="US Patent and Trademark Office" +,address="Washington, DC" +,year="2011" +,number="US Patent 7,953,778" +,month="May" +,pages="34" +,annotation=" + Maintains an array of generation numbers to track in-flight + updates and keeps an additional level of indirection to allow + readers to confine themselves to the desired snapshot of the + data structure. +" +} + +@inproceedings{Triplett:2011:RPHash +,author = {Triplett, Josh and McKenney, Paul E. and Walpole, Jonathan} +,title = {Resizable, Scalable, Concurrent Hash Tables via Relativistic Programming} +,booktitle = {Proceedings of the 2011 USENIX Annual Technical Conference} +,month = {June} +,year = {2011} +,pages = {145--158} +,numpages = {14} +,url={http://www.usenix.org/event/atc11/tech/final_files/atc11_proceedings.pdf} +,publisher = {The USENIX Association} +,address = {Portland, OR USA} +} + +@unpublished{PaulEMcKenney2011RCU3.0trainwreck +,Author="Paul E. McKenney" +,Title="3.0 and {RCU:} what went wrong" +,month="July" +,day="27" +,year="2011" +,note="Available: +\url{http://lwn.net/Articles/453002/} +[Viewed July 27, 2011]" +,annotation=" + Analysis of the RCU trainwreck in Linux kernel 3.0. +" +} + +@unpublished{NeilBrown2011MeetTheLockers +,Author="Neil Brown" +,Title="Meet the Lockers" +,month="August" +,day="3" +,year="2011" +,note="Available: +\url{http://lwn.net/Articles/453685/} +[Viewed September 2, 2011]" +,annotation=" + The Locker family as an analogy for locking, reference counting, + RCU, and seqlock. +" +} + +@article{MathieuDesnoyers2012URCU +,Author="Mathieu Desnoyers and Paul E. McKenney and Alan Stern and Michel R. Dagenais and Jonathan Walpole" +,Title="User-Level Implementations of Read-Copy Update" +,journal="IEEE Transactions on Parallel and Distributed Systems" +,volume={23} +,year="2012" +,issn="1045-9219" +,pages="375-382" +,doi="http://doi.ieeecomputersociety.org/10.1109/TPDS.2011.159" +,publisher="IEEE Computer Society" +,address="Los Alamitos, CA, USA" +,annotation={ + RCU overview, desiderata, semi-formal semantics, user-level RCU + usage scenarios, three classes of RCU implementation, wait-free + RCU updates, RCU grace-period batching, update overhead, + http://www.rdrop.com/users/paulmck/RCU/urcu-main-accepted.2011.08.30a.pdf + http://www.rdrop.com/users/paulmck/RCU/urcu-supp-accepted.2011.08.30a.pdf +} } diff --git a/trunk/Documentation/RCU/checklist.txt b/trunk/Documentation/RCU/checklist.txt index bff2d8be1e18..5c8d74968090 100644 --- a/trunk/Documentation/RCU/checklist.txt +++ b/trunk/Documentation/RCU/checklist.txt @@ -180,6 +180,20 @@ over a rather long period of time, but improvements are always welcome! operations that would not normally be undertaken while a real-time workload is running. + In particular, if you find yourself invoking one of the expedited + primitives repeatedly in a loop, please do everyone a favor: + Restructure your code so that it batches the updates, allowing + a single non-expedited primitive to cover the entire batch. + This will very likely be faster than the loop containing the + expedited primitive, and will be much much easier on the rest + of the system, especially to real-time workloads running on + the rest of the system. + + In addition, it is illegal to call the expedited forms from + a CPU-hotplug notifier, or while holding a lock that is acquired + by a CPU-hotplug notifier. Failing to observe this restriction + will result in deadlock. + 7. If the updater uses call_rcu() or synchronize_rcu(), then the corresponding readers must use rcu_read_lock() and rcu_read_unlock(). If the updater uses call_rcu_bh() or diff --git a/trunk/Documentation/RCU/stallwarn.txt b/trunk/Documentation/RCU/stallwarn.txt index 083d88cbc089..523364e4e1f1 100644 --- a/trunk/Documentation/RCU/stallwarn.txt +++ b/trunk/Documentation/RCU/stallwarn.txt @@ -12,14 +12,38 @@ CONFIG_RCU_CPU_STALL_TIMEOUT This kernel configuration parameter defines the period of time that RCU will wait from the beginning of a grace period until it issues an RCU CPU stall warning. This time period is normally - ten seconds. + sixty seconds. -RCU_SECONDS_TILL_STALL_RECHECK + This configuration parameter may be changed at runtime via the + /sys/module/rcutree/parameters/rcu_cpu_stall_timeout, however + this parameter is checked only at the beginning of a cycle. + So if you are 30 seconds into a 70-second stall, setting this + sysfs parameter to (say) five will shorten the timeout for the + -next- stall, or the following warning for the current stall + (assuming the stall lasts long enough). It will not affect the + timing of the next warning for the current stall. - This macro defines the period of time that RCU will wait after - issuing a stall warning until it issues another stall warning - for the same stall. This time period is normally set to three - times the check interval plus thirty seconds. + Stall-warning messages may be enabled and disabled completely via + /sys/module/rcutree/parameters/rcu_cpu_stall_suppress. + +CONFIG_RCU_CPU_STALL_VERBOSE + + This kernel configuration parameter causes the stall warning to + also dump the stacks of any tasks that are blocking the current + RCU-preempt grace period. + +RCU_CPU_STALL_INFO + + This kernel configuration parameter causes the stall warning to + print out additional per-CPU diagnostic information, including + information on scheduling-clock ticks and RCU's idle-CPU tracking. + +RCU_STALL_DELAY_DELTA + + Although the lockdep facility is extremely useful, it does add + some overhead. Therefore, under CONFIG_PROVE_RCU, the + RCU_STALL_DELAY_DELTA macro allows five extra seconds before + giving an RCU CPU stall warning message. RCU_STALL_RAT_DELAY @@ -64,6 +88,54 @@ INFO: rcu_bh_state detected stalls on CPUs/tasks: { } (detected by 4, 2502 jiffi This is rare, but does happen from time to time in real life. +If the CONFIG_RCU_CPU_STALL_INFO kernel configuration parameter is set, +more information is printed with the stall-warning message, for example: + + INFO: rcu_preempt detected stall on CPU + 0: (63959 ticks this GP) idle=241/3fffffffffffffff/0 + (t=65000 jiffies) + +In kernels with CONFIG_RCU_FAST_NO_HZ, even more information is +printed: + + INFO: rcu_preempt detected stall on CPU + 0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 drain=0 . timer=-1 + (t=65000 jiffies) + +The "(64628 ticks this GP)" indicates that this CPU has taken more +than 64,000 scheduling-clock interrupts during the current stalled +grace period. If the CPU was not yet aware of the current grace +period (for example, if it was offline), then this part of the message +indicates how many grace periods behind the CPU is. + +The "idle=" portion of the message prints the dyntick-idle state. +The hex number before the first "/" is the low-order 12 bits of the +dynticks counter, which will have an even-numbered value if the CPU is +in dyntick-idle mode and an odd-numbered value otherwise. The hex +number between the two "/"s is the value of the nesting, which will +be a small positive number if in the idle loop and a very large positive +number (as shown above) otherwise. + +For CONFIG_RCU_FAST_NO_HZ kernels, the "drain=0" indicates that the +CPU is not in the process of trying to force itself into dyntick-idle +state, the "." indicates that the CPU has not given up forcing RCU +into dyntick-idle mode (it would be "H" otherwise), and the "timer=-1" +indicates that the CPU has not recented forced RCU into dyntick-idle +mode (it would otherwise indicate the number of microseconds remaining +in this forced state). + + +Multiple Warnings From One Stall + +If a stall lasts long enough, multiple stall-warning messages will be +printed for it. The second and subsequent messages are printed at +longer intervals, so that the time between (say) the first and second +message will be about three times the interval between the beginning +of the stall and the first message. + + +What Causes RCU CPU Stall Warnings? + So your kernel printed an RCU CPU stall warning. The next question is "What caused it?" The following problems can result in RCU CPU stall warnings: @@ -128,4 +200,5 @@ is occurring, which will usually be in the function nearest the top of that portion of the stack which remains the same from trace to trace. If you can reliably trigger the stall, ftrace can be quite helpful. -RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE. +RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE +and with RCU's event tracing. diff --git a/trunk/Documentation/RCU/torture.txt b/trunk/Documentation/RCU/torture.txt index d67068d0d2b9..375d3fb71437 100644 --- a/trunk/Documentation/RCU/torture.txt +++ b/trunk/Documentation/RCU/torture.txt @@ -69,6 +69,13 @@ onoff_interval CPU-hotplug operations regardless of what value is specified for onoff_interval. +onoff_holdoff The number of seconds to wait until starting CPU-hotplug + operations. This would normally only be used when + rcutorture was built into the kernel and started + automatically at boot time, in which case it is useful + in order to avoid confusing boot-time code with CPUs + coming and going. + shuffle_interval The number of seconds to keep the test threads affinitied to a particular subset of the CPUs, defaults to 3 seconds. @@ -79,6 +86,24 @@ shutdown_secs The number of seconds to run the test before terminating zero, which disables test termination and system shutdown. This capability is useful for automated testing. +stall_cpu The number of seconds that a CPU should be stalled while + within both an rcu_read_lock() and a preempt_disable(). + This stall happens only once per rcutorture run. + If you need multiple stalls, use modprobe and rmmod to + repeatedly run rcutorture. The default for stall_cpu + is zero, which prevents rcutorture from stalling a CPU. + + Note that attempts to rmmod rcutorture while the stall + is ongoing will hang, so be careful what value you + choose for this module parameter! In addition, too-large + values for stall_cpu might well induce failures and + warnings in other parts of the kernel. You have been + warned! + +stall_cpu_holdoff + The number of seconds to wait after rcutorture starts + before stalling a CPU. Defaults to 10 seconds. + stat_interval The number of seconds between output of torture statistics (via printk()). Regardless of the interval, statistics are printed when the module is unloaded. @@ -271,11 +296,13 @@ The following script may be used to torture RCU: #!/bin/sh modprobe rcutorture - sleep 100 + sleep 3600 rmmod rcutorture dmesg | grep torture: The output can be manually inspected for the error flag of "!!!". One could of course create a more elaborate script that automatically -checked for such errors. The "rmmod" command forces a "SUCCESS" or -"FAILURE" indication to be printk()ed. +checked for such errors. The "rmmod" command forces a "SUCCESS", +"FAILURE", or "RCU_HOTPLUG" indication to be printk()ed. The first +two are self-explanatory, while the last indicates that while there +were no RCU failures, CPU-hotplug problems were detected. diff --git a/trunk/Documentation/RCU/trace.txt b/trunk/Documentation/RCU/trace.txt index 49587abfc2f7..f6f15ce39903 100644 --- a/trunk/Documentation/RCU/trace.txt +++ b/trunk/Documentation/RCU/trace.txt @@ -33,23 +33,23 @@ rcu/rcuboost: The output of "cat rcu/rcudata" looks as follows: rcu_sched: - 0 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=545/1/0 df=50 of=0 ri=0 ql=163 qs=NRW. kt=0/W/0 ktl=ebc3 b=10 ci=153737 co=0 ca=0 - 1 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=967/1/0 df=58 of=0 ri=0 ql=634 qs=NRW. kt=0/W/1 ktl=58c b=10 ci=191037 co=0 ca=0 - 2 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=1081/1/0 df=175 of=0 ri=0 ql=74 qs=N.W. kt=0/W/2 ktl=da94 b=10 ci=75991 co=0 ca=0 - 3 c=20942 g=20943 pq=1 pgp=20942 qp=1 dt=1846/0/0 df=404 of=0 ri=0 ql=0 qs=.... kt=0/W/3 ktl=d1cd b=10 ci=72261 co=0 ca=0 - 4 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=369/1/0 df=83 of=0 ri=0 ql=48 qs=N.W. kt=0/W/4 ktl=e0e7 b=10 ci=128365 co=0 ca=0 - 5 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=381/1/0 df=64 of=0 ri=0 ql=169 qs=NRW. kt=0/W/5 ktl=fb2f b=10 ci=164360 co=0 ca=0 - 6 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=1037/1/0 df=183 of=0 ri=0 ql=62 qs=N.W. kt=0/W/6 ktl=d2ad b=10 ci=65663 co=0 ca=0 - 7 c=20897 g=20897 pq=1 pgp=20896 qp=0 dt=1572/0/0 df=382 of=0 ri=0 ql=0 qs=.... kt=0/W/7 ktl=cf15 b=10 ci=75006 co=0 ca=0 + 0 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=545/1/0 df=50 of=0 ql=163 qs=NRW. kt=0/W/0 ktl=ebc3 b=10 ci=153737 co=0 ca=0 + 1 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=967/1/0 df=58 of=0 ql=634 qs=NRW. kt=0/W/1 ktl=58c b=10 ci=191037 co=0 ca=0 + 2 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=1081/1/0 df=175 of=0 ql=74 qs=N.W. kt=0/W/2 ktl=da94 b=10 ci=75991 co=0 ca=0 + 3 c=20942 g=20943 pq=1 pgp=20942 qp=1 dt=1846/0/0 df=404 of=0 ql=0 qs=.... kt=0/W/3 ktl=d1cd b=10 ci=72261 co=0 ca=0 + 4 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=369/1/0 df=83 of=0 ql=48 qs=N.W. kt=0/W/4 ktl=e0e7 b=10 ci=128365 co=0 ca=0 + 5 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=381/1/0 df=64 of=0 ql=169 qs=NRW. kt=0/W/5 ktl=fb2f b=10 ci=164360 co=0 ca=0 + 6 c=20972 g=20973 pq=1 pgp=20973 qp=0 dt=1037/1/0 df=183 of=0 ql=62 qs=N.W. kt=0/W/6 ktl=d2ad b=10 ci=65663 co=0 ca=0 + 7 c=20897 g=20897 pq=1 pgp=20896 qp=0 dt=1572/0/0 df=382 of=0 ql=0 qs=.... kt=0/W/7 ktl=cf15 b=10 ci=75006 co=0 ca=0 rcu_bh: - 0 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=545/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/0 ktl=ebc3 b=10 ci=0 co=0 ca=0 - 1 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=967/1/0 df=3 of=0 ri=1 ql=0 qs=.... kt=0/W/1 ktl=58c b=10 ci=151 co=0 ca=0 - 2 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=1081/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/2 ktl=da94 b=10 ci=0 co=0 ca=0 - 3 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=1846/0/0 df=8 of=0 ri=1 ql=0 qs=.... kt=0/W/3 ktl=d1cd b=10 ci=0 co=0 ca=0 - 4 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=369/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/4 ktl=e0e7 b=10 ci=0 co=0 ca=0 - 5 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=381/1/0 df=4 of=0 ri=1 ql=0 qs=.... kt=0/W/5 ktl=fb2f b=10 ci=0 co=0 ca=0 - 6 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=1037/1/0 df=6 of=0 ri=1 ql=0 qs=.... kt=0/W/6 ktl=d2ad b=10 ci=0 co=0 ca=0 - 7 c=1474 g=1474 pq=1 pgp=1473 qp=0 dt=1572/0/0 df=8 of=0 ri=1 ql=0 qs=.... kt=0/W/7 ktl=cf15 b=10 ci=0 co=0 ca=0 + 0 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=545/1/0 df=6 of=0 ql=0 qs=.... kt=0/W/0 ktl=ebc3 b=10 ci=0 co=0 ca=0 + 1 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=967/1/0 df=3 of=0 ql=0 qs=.... kt=0/W/1 ktl=58c b=10 ci=151 co=0 ca=0 + 2 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=1081/1/0 df=6 of=0 ql=0 qs=.... kt=0/W/2 ktl=da94 b=10 ci=0 co=0 ca=0 + 3 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=1846/0/0 df=8 of=0 ql=0 qs=.... kt=0/W/3 ktl=d1cd b=10 ci=0 co=0 ca=0 + 4 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=369/1/0 df=6 of=0 ql=0 qs=.... kt=0/W/4 ktl=e0e7 b=10 ci=0 co=0 ca=0 + 5 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=381/1/0 df=4 of=0 ql=0 qs=.... kt=0/W/5 ktl=fb2f b=10 ci=0 co=0 ca=0 + 6 c=1480 g=1480 pq=1 pgp=1480 qp=0 dt=1037/1/0 df=6 of=0 ql=0 qs=.... kt=0/W/6 ktl=d2ad b=10 ci=0 co=0 ca=0 + 7 c=1474 g=1474 pq=1 pgp=1473 qp=0 dt=1572/0/0 df=8 of=0 ql=0 qs=.... kt=0/W/7 ktl=cf15 b=10 ci=0 co=0 ca=0 The first section lists the rcu_data structures for rcu_sched, the second for rcu_bh. Note that CONFIG_TREE_PREEMPT_RCU kernels will have an @@ -119,10 +119,6 @@ o "of" is the number of times that some other CPU has forced a CPU is offline when it is really alive and kicking) is a fatal error, so it makes sense to err conservatively. -o "ri" is the number of times that RCU has seen fit to send a - reschedule IPI to this CPU in order to get it to report a - quiescent state. - o "ql" is the number of RCU callbacks currently residing on this CPU. This is the total number of callbacks, regardless of what state they are in (new, waiting for grace period to diff --git a/trunk/Documentation/devicetree/bindings/gpio/led.txt b/trunk/Documentation/devicetree/bindings/gpio/led.txt index 141087cf3107..fd2bd56e7195 100644 --- a/trunk/Documentation/devicetree/bindings/gpio/led.txt +++ b/trunk/Documentation/devicetree/bindings/gpio/led.txt @@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds device. Each node's name represents the name of the corresponding LED. LED sub-node properties: -- gpios : Should specify the LED's GPIO, see "Specifying GPIO information - for devices" in Documentation/devicetree/booting-without-of.txt. Active - low LEDs should be indicated using flags in the GPIO specifier. +- gpios : Should specify the LED's GPIO, see "gpios property" in + Documentation/devicetree/gpio.txt. Active low LEDs should be + indicated using flags in the GPIO specifier. - label : (optional) The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). - linux,default-trigger : (optional) This parameter, if present, is a diff --git a/trunk/Documentation/devicetree/bindings/vendor-prefixes.txt b/trunk/Documentation/devicetree/bindings/vendor-prefixes.txt index ecc6a6cd26c1..a20008ab319a 100644 --- a/trunk/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/trunk/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -30,6 +30,7 @@ national National Semiconductor nintendo Nintendo nvidia NVIDIA nxp NXP Semiconductors +picochip Picochip Ltd powervr Imagination Technologies qcom Qualcomm, Inc. ramtron Ramtron International diff --git a/trunk/Documentation/hwmon/jc42 b/trunk/Documentation/hwmon/jc42 index a22ecf48f255..52729a756c1b 100644 --- a/trunk/Documentation/hwmon/jc42 +++ b/trunk/Documentation/hwmon/jc42 @@ -7,21 +7,29 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1f Datasheets: http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf - * IDT TSE2002B3, TS3000B3 - Prefix: 'tse2002b3', 'ts3000b3' + * Atmel AT30TS00 + Prefix: 'at30ts00' Addresses scanned: I2C 0x18 - 0x1f Datasheets: - http://www.idt.com/products/getdoc.cfm?docid=18715691 - http://www.idt.com/products/getdoc.cfm?docid=18715692 + http://www.atmel.com/Images/doc8585.pdf + * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2 + Prefix: 'tse2002', 'ts3000' + Addresses scanned: I2C 0x18 - 0x1f + Datasheets: + http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf + http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf + http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf + http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf * Maxim MAX6604 Prefix: 'max6604' Addresses scanned: I2C 0x18 - 0x1f Datasheets: http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf - * Microchip MCP9805, MCP98242, MCP98243, MCP9843 - Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843' + * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843 + Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843' Addresses scanned: I2C 0x18 - 0x1f Datasheets: + http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf @@ -48,6 +56,12 @@ Supported chips: Datasheets: http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf + * ST Microelectronics STTS2002, STTS3000 + Prefix: 'stts2002', 'stts3000' + Addresses scanned: I2C 0x18 - 0x1f + Datasheets: + http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf + http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf * JEDEC JC 42.4 compliant temperature sensor chips Prefix: 'jc42' Addresses scanned: I2C 0x18 - 0x1f diff --git a/trunk/Documentation/hwmon/w83627ehf b/trunk/Documentation/hwmon/w83627ehf index 3f44dbdfda70..ceaf6f652b00 100644 --- a/trunk/Documentation/hwmon/w83627ehf +++ b/trunk/Documentation/hwmon/w83627ehf @@ -50,7 +50,7 @@ W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I (NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively as Winbond chips. -The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F), +The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F), 2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID (except for 627UHG), alarms with beep warnings (control unimplemented), and some automatic fan regulation strategies (plus manual fan control mode). @@ -143,8 +143,13 @@ pwm[1-4]_min_output - minimum fan speed (range 1 - 255), when the temperature pwm[1-4]_stop_time - how many milliseconds [ms] must elapse to switch corresponding fan off. (when the temperature was below defined range). +pwm[1-4]_start_output-minimum fan speed (range 1 - 255) when spinning up +pwm[1-4]_step_output- rate of fan speed change (1 - 255) +pwm[1-4]_stop_output- minimum fan speed (range 1 - 255) when spinning down +pwm[1-4]_max_output - maximum fan speed (range 1 - 255), when the temperature + is above defined range. -Note: last two functions are influenced by other control bits, not yet exported +Note: last six functions are influenced by other control bits, not yet exported by the driver, so a change might not have any effect. Implementation Details diff --git a/trunk/Documentation/hwmon/zl6100 b/trunk/Documentation/hwmon/zl6100 index 51f76a189fee..a4e8d90f59f6 100644 --- a/trunk/Documentation/hwmon/zl6100 +++ b/trunk/Documentation/hwmon/zl6100 @@ -88,14 +88,12 @@ Module parameters delay ----- -Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between -I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though -1 ms appears to be sufficient and has not caused any problems in testing. -The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to -affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms -except for ZL2004 and ZL6105. To enable manual override, the driver provides a -writeable module parameter, 'delay', which can be used to set the interval to -a value between 0 and 65,535 microseconds. +Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C +bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms +appears to be sufficient and has not caused any problems in testing. The problem +is known to affect all currently supported chips. For manual override, the +driver provides a writeable module parameter, 'delay', which can be used to set +the interval to a value between 0 and 65,535 microseconds. Sysfs entries diff --git a/trunk/Documentation/input/alps.txt b/trunk/Documentation/input/alps.txt index f274c28b5103..2f95308251d4 100644 --- a/trunk/Documentation/input/alps.txt +++ b/trunk/Documentation/input/alps.txt @@ -13,7 +13,8 @@ Detection All ALPS touchpads should respond to the "E6 report" command sequence: E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or -00-00-64. +00-00-64 if no buttons are pressed. The bits 0-2 of the first byte will be 1s +if some buttons are pressed. If the E6 report is successful, the touchpad model is identified using the "E7 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is diff --git a/trunk/Documentation/input/event-codes.txt b/trunk/Documentation/input/event-codes.txt index 23fcb05175be..53305bd08182 100644 --- a/trunk/Documentation/input/event-codes.txt +++ b/trunk/Documentation/input/event-codes.txt @@ -17,11 +17,11 @@ reports supported by a device are also provided by sysfs in class/input/event*/device/capabilities/, and the properties of a device are provided in class/input/event*/device/properties. -Types: -========== -Types are groupings of codes under a logical input construct. Each type has a -set of applicable codes to be used in generating events. See the Codes section -for details on valid codes for each type. +Event types: +=========== +Event types are groupings of codes under a logical input construct. Each +type has a set of applicable codes to be used in generating events. See the +Codes section for details on valid codes for each type. * EV_SYN: - Used as markers to separate events. Events may be separated in time or in @@ -63,9 +63,9 @@ for details on valid codes for each type. * EV_FF_STATUS: - Used to receive force feedback device status. -Codes: -========== -Codes define the precise type of event. +Event codes: +=========== +Event codes define the precise type of event. EV_SYN: ---------- @@ -220,6 +220,56 @@ EV_PWR: EV_PWR events are a special type of event used specifically for power mangement. Its usage is not well defined. To be addressed later. +Device properties: +================= +Normally, userspace sets up an input device based on the data it emits, +i.e., the event types. In the case of two devices emitting the same event +types, additional information can be provided in the form of device +properties. + +INPUT_PROP_DIRECT + INPUT_PROP_POINTER: +-------------------------------------- +The INPUT_PROP_DIRECT property indicates that device coordinates should be +directly mapped to screen coordinates (not taking into account trivial +transformations, such as scaling, flipping and rotating). Non-direct input +devices require non-trivial transformation, such as absolute to relative +transformation for touchpads. Typical direct input devices: touchscreens, +drawing tablets; non-direct devices: touchpads, mice. + +The INPUT_PROP_POINTER property indicates that the device is not transposed +on the screen and thus requires use of an on-screen pointer to trace user's +movements. Typical pointer devices: touchpads, tablets, mice; non-pointer +device: touchscreen. + +If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is +considered undefined and the device type should be deduced in the +traditional way, using emitted event types. + +INPUT_PROP_BUTTONPAD: +-------------------- +For touchpads where the button is placed beneath the surface, such that +pressing down on the pad causes a button click, this property should be +set. Common in clickpad notebooks and macbooks from 2009 and onwards. + +Originally, the buttonpad property was coded into the bcm5974 driver +version field under the name integrated button. For backwards +compatibility, both methods need to be checked in userspace. + +INPUT_PROP_SEMI_MT: +------------------ +Some touchpads, most common between 2008 and 2011, can detect the presence +of multiple contacts without resolving the individual positions; only the +number of contacts and a rectangular shape is known. For such +touchpads, the semi-mt property should be set. + +Depending on the device, the rectangle may enclose all touches, like a +bounding box, or just some of them, for instance the two most recent +touches. The diversity makes the rectangle of limited use, but some +gestures can normally be extracted from it. + +If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT +device. + Guidelines: ========== The guidelines below ensure proper single-touch and multi-finger functionality. @@ -240,6 +290,8 @@ used to report when a touch is active on the screen. BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch contact. BTN_TOOL_ events should be reported where possible. +For new hardware, INPUT_PROP_DIRECT should be set. + Trackpads: ---------- Legacy trackpads that only provide relative position information must report @@ -250,6 +302,8 @@ location of the touch. BTN_TOUCH should be used to report when a touch is active on the trackpad. Where multi-finger support is available, BTN_TOOL_ should be used to report the number of touches active on the trackpad. +For new hardware, INPUT_PROP_POINTER should be set. + Tablets: ---------- BTN_TOOL_ events must be reported when a stylus or other tool is active on @@ -260,3 +314,5 @@ button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}. BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use meaningful buttons, like BTN_FORWARD, unless the button is labeled for that purpose on the device. + +For new hardware, both INPUT_PROP_DIRECT and INPUT_PROP_POINTER should be set. diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt index 033d4e69b43b..d99fd9c0ec0e 100644 --- a/trunk/Documentation/kernel-parameters.txt +++ b/trunk/Documentation/kernel-parameters.txt @@ -2211,6 +2211,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. default: off. + printk.always_kmsg_dump= + Trigger kmsg_dump for cases other than kernel oops or + panics + Format: (1/Y/y=enable, 0/N/n=disable) + default: disabled + printk.time= Show timing data prefixed to each printk message line Format: (1/Y/y=enable, 0/N/n=disable) diff --git a/trunk/Documentation/scheduler/sched-stats.txt b/trunk/Documentation/scheduler/sched-stats.txt index 1cd5d51bc761..8259b34a66ae 100644 --- a/trunk/Documentation/scheduler/sched-stats.txt +++ b/trunk/Documentation/scheduler/sched-stats.txt @@ -38,7 +38,8 @@ First field is a sched_yield() statistic: 1) # of times sched_yield() was called Next three are schedule() statistics: - 2) # of times we switched to the expired queue and reused it + 2) This field is a legacy array expiration count field used in the O(1) + scheduler. We kept it for ABI compatibility, but it is always set to zero. 3) # of times schedule() was called 4) # of times schedule() left the processor idle diff --git a/trunk/Documentation/static-keys.txt b/trunk/Documentation/static-keys.txt new file mode 100644 index 000000000000..d93f3c00f245 --- /dev/null +++ b/trunk/Documentation/static-keys.txt @@ -0,0 +1,286 @@ + Static Keys + ----------- + +By: Jason Baron + +0) Abstract + +Static keys allows the inclusion of seldom used features in +performance-sensitive fast-path kernel code, via a GCC feature and a code +patching technique. A quick example: + + struct static_key key = STATIC_KEY_INIT_FALSE; + + ... + + if (static_key_false(&key)) + do unlikely code + else + do likely code + + ... + static_key_slow_inc(); + ... + static_key_slow_inc(); + ... + +The static_key_false() branch will be generated into the code with as little +impact to the likely code path as possible. + + +1) Motivation + + +Currently, tracepoints are implemented using a conditional branch. The +conditional check requires checking a global variable for each tracepoint. +Although the overhead of this check is small, it increases when the memory +cache comes under pressure (memory cache lines for these global variables may +be shared with other memory accesses). As we increase the number of tracepoints +in the kernel this overhead may become more of an issue. In addition, +tracepoints are often dormant (disabled) and provide no direct kernel +functionality. Thus, it is highly desirable to reduce their impact as much as +possible. Although tracepoints are the original motivation for this work, other +kernel code paths should be able to make use of the static keys facility. + + +2) Solution + + +gcc (v4.5) adds a new 'asm goto' statement that allows branching to a label: + +http://gcc.gnu.org/ml/gcc-patches/2009-07/msg01556.html + +Using the 'asm goto', we can create branches that are either taken or not taken +by default, without the need to check memory. Then, at run-time, we can patch +the branch site to change the branch direction. + +For example, if we have a simple branch that is disabled by default: + + if (static_key_false(&key)) + printk("I am the true branch\n"); + +Thus, by default the 'printk' will not be emitted. And the code generated will +consist of a single atomic 'no-op' instruction (5 bytes on x86), in the +straight-line code path. When the branch is 'flipped', we will patch the +'no-op' in the straight-line codepath with a 'jump' instruction to the +out-of-line true branch. Thus, changing branch direction is expensive but +branch selection is basically 'free'. That is the basic tradeoff of this +optimization. + +This lowlevel patching mechanism is called 'jump label patching', and it gives +the basis for the static keys facility. + +3) Static key label API, usage and examples: + + +In order to make use of this optimization you must first define a key: + + struct static_key key; + +Which is initialized as: + + struct static_key key = STATIC_KEY_INIT_TRUE; + +or: + + struct static_key key = STATIC_KEY_INIT_FALSE; + +If the key is not initialized, it is default false. The 'struct static_key', +must be a 'global'. That is, it can't be allocated on the stack or dynamically +allocated at run-time. + +The key is then used in code as: + + if (static_key_false(&key)) + do unlikely code + else + do likely code + +Or: + + if (static_key_true(&key)) + do likely code + else + do unlikely code + +A key that is initialized via 'STATIC_KEY_INIT_FALSE', must be used in a +'static_key_false()' construct. Likewise, a key initialized via +'STATIC_KEY_INIT_TRUE' must be used in a 'static_key_true()' construct. A +single key can be used in many branches, but all the branches must match the +way that the key has been initialized. + +The branch(es) can then be switched via: + + static_key_slow_inc(&key); + ... + static_key_slow_dec(&key); + +Thus, 'static_key_slow_inc()' means 'make the branch true', and +'static_key_slow_dec()' means 'make the the branch false' with appropriate +reference counting. For example, if the key is initialized true, a +static_key_slow_dec(), will switch the branch to false. And a subsequent +static_key_slow_inc(), will change the branch back to true. Likewise, if the +key is initialized false, a 'static_key_slow_inc()', will change the branch to +true. And then a 'static_key_slow_dec()', will again make the branch false. + +An example usage in the kernel is the implementation of tracepoints: + + static inline void trace_##name(proto) \ + { \ + if (static_key_false(&__tracepoint_##name.key)) \ + __DO_TRACE(&__tracepoint_##name, \ + TP_PROTO(data_proto), \ + TP_ARGS(data_args), \ + TP_CONDITION(cond)); \ + } + +Tracepoints are disabled by default, and can be placed in performance critical +pieces of the kernel. Thus, by using a static key, the tracepoints can have +absolutely minimal impact when not in use. + + +4) Architecture level code patching interface, 'jump labels' + + +There are a few functions and macros that architectures must implement in order +to take advantage of this optimization. If there is no architecture support, we +simply fall back to a traditional, load, test, and jump sequence. + +* select HAVE_ARCH_JUMP_LABEL, see: arch/x86/Kconfig + +* #define JUMP_LABEL_NOP_SIZE, see: arch/x86/include/asm/jump_label.h + +* __always_inline bool arch_static_branch(struct static_key *key), see: + arch/x86/include/asm/jump_label.h + +* void arch_jump_label_transform(struct jump_entry *entry, enum jump_label_type type), + see: arch/x86/kernel/jump_label.c + +* __init_or_module void arch_jump_label_transform_static(struct jump_entry *entry, enum jump_label_type type), + see: arch/x86/kernel/jump_label.c + + +* struct jump_entry, see: arch/x86/include/asm/jump_label.h + + +5) Static keys / jump label analysis, results (x86_64): + + +As an example, let's add the following branch to 'getppid()', such that the +system call now looks like: + +SYSCALL_DEFINE0(getppid) +{ + int pid; + ++ if (static_key_false(&key)) ++ printk("I am the true branch\n"); + + rcu_read_lock(); + pid = task_tgid_vnr(rcu_dereference(current->real_parent)); + rcu_read_unlock(); + + return pid; +} + +The resulting instructions with jump labels generated by GCC is: + +ffffffff81044290 : +ffffffff81044290: 55 push %rbp +ffffffff81044291: 48 89 e5 mov %rsp,%rbp +ffffffff81044294: e9 00 00 00 00 jmpq ffffffff81044299 +ffffffff81044299: 65 48 8b 04 25 c0 b6 mov %gs:0xb6c0,%rax +ffffffff810442a0: 00 00 +ffffffff810442a2: 48 8b 80 80 02 00 00 mov 0x280(%rax),%rax +ffffffff810442a9: 48 8b 80 b0 02 00 00 mov 0x2b0(%rax),%rax +ffffffff810442b0: 48 8b b8 e8 02 00 00 mov 0x2e8(%rax),%rdi +ffffffff810442b7: e8 f4 d9 00 00 callq ffffffff81051cb0 +ffffffff810442bc: 5d pop %rbp +ffffffff810442bd: 48 98 cltq +ffffffff810442bf: c3 retq +ffffffff810442c0: 48 c7 c7 e3 54 98 81 mov $0xffffffff819854e3,%rdi +ffffffff810442c7: 31 c0 xor %eax,%eax +ffffffff810442c9: e8 71 13 6d 00 callq ffffffff8171563f +ffffffff810442ce: eb c9 jmp ffffffff81044299 + +Without the jump label optimization it looks like: + +ffffffff810441f0 : +ffffffff810441f0: 8b 05 8a 52 d8 00 mov 0xd8528a(%rip),%eax # ffffffff81dc9480 +ffffffff810441f6: 55 push %rbp +ffffffff810441f7: 48 89 e5 mov %rsp,%rbp +ffffffff810441fa: 85 c0 test %eax,%eax +ffffffff810441fc: 75 27 jne ffffffff81044225 +ffffffff810441fe: 65 48 8b 04 25 c0 b6 mov %gs:0xb6c0,%rax +ffffffff81044205: 00 00 +ffffffff81044207: 48 8b 80 80 02 00 00 mov 0x280(%rax),%rax +ffffffff8104420e: 48 8b 80 b0 02 00 00 mov 0x2b0(%rax),%rax +ffffffff81044215: 48 8b b8 e8 02 00 00 mov 0x2e8(%rax),%rdi +ffffffff8104421c: e8 2f da 00 00 callq ffffffff81051c50 +ffffffff81044221: 5d pop %rbp +ffffffff81044222: 48 98 cltq +ffffffff81044224: c3 retq +ffffffff81044225: 48 c7 c7 13 53 98 81 mov $0xffffffff81985313,%rdi +ffffffff8104422c: 31 c0 xor %eax,%eax +ffffffff8104422e: e8 60 0f 6d 00 callq ffffffff81715193 +ffffffff81044233: eb c9 jmp ffffffff810441fe +ffffffff81044235: 66 66 2e 0f 1f 84 00 data32 nopw %cs:0x0(%rax,%rax,1) +ffffffff8104423c: 00 00 00 00 + +Thus, the disable jump label case adds a 'mov', 'test' and 'jne' instruction +vs. the jump label case just has a 'no-op' or 'jmp 0'. (The jmp 0, is patched +to a 5 byte atomic no-op instruction at boot-time.) Thus, the disabled jump +label case adds: + +6 (mov) + 2 (test) + 2 (jne) = 10 - 5 (5 byte jump 0) = 5 addition bytes. + +If we then include the padding bytes, the jump label code saves, 16 total bytes +of instruction memory for this small fucntion. In this case the non-jump label +function is 80 bytes long. Thus, we have have saved 20% of the instruction +footprint. We can in fact improve this even further, since the 5-byte no-op +really can be a 2-byte no-op since we can reach the branch with a 2-byte jmp. +However, we have not yet implemented optimal no-op sizes (they are currently +hard-coded). + +Since there are a number of static key API uses in the scheduler paths, +'pipe-test' (also known as 'perf bench sched pipe') can be used to show the +performance improvement. Testing done on 3.3.0-rc2: + +jump label disabled: + + Performance counter stats for 'bash -c /tmp/pipe-test' (50 runs): + + 855.700314 task-clock # 0.534 CPUs utilized ( +- 0.11% ) + 200,003 context-switches # 0.234 M/sec ( +- 0.00% ) + 0 CPU-migrations # 0.000 M/sec ( +- 39.58% ) + 487 page-faults # 0.001 M/sec ( +- 0.02% ) + 1,474,374,262 cycles # 1.723 GHz ( +- 0.17% ) + stalled-cycles-frontend + stalled-cycles-backend + 1,178,049,567 instructions # 0.80 insns per cycle ( +- 0.06% ) + 208,368,926 branches # 243.507 M/sec ( +- 0.06% ) + 5,569,188 branch-misses # 2.67% of all branches ( +- 0.54% ) + + 1.601607384 seconds time elapsed ( +- 0.07% ) + +jump label enabled: + + Performance counter stats for 'bash -c /tmp/pipe-test' (50 runs): + + 841.043185 task-clock # 0.533 CPUs utilized ( +- 0.12% ) + 200,004 context-switches # 0.238 M/sec ( +- 0.00% ) + 0 CPU-migrations # 0.000 M/sec ( +- 40.87% ) + 487 page-faults # 0.001 M/sec ( +- 0.05% ) + 1,432,559,428 cycles # 1.703 GHz ( +- 0.18% ) + stalled-cycles-frontend + stalled-cycles-backend + 1,175,363,994 instructions # 0.82 insns per cycle ( +- 0.04% ) + 206,859,359 branches # 245.956 M/sec ( +- 0.04% ) + 4,884,119 branch-misses # 2.36% of all branches ( +- 0.85% ) + + 1.579384366 seconds time elapsed + +The percentage of saved branches is .7%, and we've saved 12% on +'branch-misses'. This is where we would expect to get the most savings, since +this optimization is about reducing the number of branches. In addition, we've +saved .2% on instructions, and 2.8% on cycles and 1.4% on elapsed time. diff --git a/trunk/Documentation/sysctl/kernel.txt b/trunk/Documentation/sysctl/kernel.txt index 8c20fbd8b42d..6d78841fd416 100644 --- a/trunk/Documentation/sysctl/kernel.txt +++ b/trunk/Documentation/sysctl/kernel.txt @@ -601,6 +601,8 @@ can be ORed together: instead of using the one provided by the hardware. 512 - A kernel warning has occurred. 1024 - A module from drivers/staging was loaded. +2048 - The system is working around a severe firmware bug. +4096 - An out-of-tree module has been loaded. ============================================================== diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index 252972b6c4a0..9c63a43ab63a 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -269,7 +269,6 @@ S: Orphan F: drivers/platform/x86/wmi.c AD1889 ALSA SOUND DRIVER -M: Kyle McMartin M: Thibaut Varene W: http://wiki.parisc-linux.org/AD1889 L: linux-parisc@vger.kernel.org @@ -789,12 +788,6 @@ F: arch/arm/mach-mx*/ F: arch/arm/mach-imx/ F: arch/arm/plat-mxc/ -ARM/FREESCALE IMX51 -M: Amit Kucheria -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -F: arch/arm/mach-mx5/ - ARM/FREESCALE IMX6 M: Shawn Guo L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -969,7 +962,7 @@ F: drivers/tty/serial/msm_serial.c F: drivers/platform/msm/ F: drivers/*/pm8???-* F: include/linux/mfd/pm8xxx/ -T: git git://codeaurora.org/quic/kernel/davidb/linux-msm.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git S: Maintained ARM/TOSA MACHINE SUPPORT @@ -1317,7 +1310,7 @@ F: drivers/atm/ F: include/linux/atm* ATMEL AT91 MCI DRIVER -M: Nicolas Ferre +M: Ludovic Desroches L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.atmel.com/products/AT91/ W: http://www.at91.com/ @@ -1325,7 +1318,7 @@ S: Maintained F: drivers/mmc/host/at91_mci.c ATMEL AT91 / AT32 MCI DRIVER -M: Nicolas Ferre +M: Ludovic Desroches S: Maintained F: drivers/mmc/host/atmel-mci.c F: drivers/mmc/host/atmel-mci-regs.h @@ -1520,19 +1513,23 @@ F: drivers/mtd/devices/block2mtd.c BLUETOOTH DRIVERS M: Marcel Holtmann -M: "Gustavo F. Padovan" +M: Gustavo Padovan +M: Johan Hedberg L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git S: Maintained F: drivers/bluetooth/ BLUETOOTH SUBSYSTEM M: Marcel Holtmann -M: "Gustavo F. Padovan" +M: Gustavo Padovan +M: Johan Hedberg L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git S: Maintained F: net/bluetooth/ F: include/net/bluetooth/ @@ -1724,6 +1721,14 @@ F: include/linux/can/error.h F: include/linux/can/netlink.h F: include/linux/can/platform/ +CAPABILITIES +M: Serge Hallyn +L: linux-security-module@vger.kernel.org +S: Supported +F: include/linux/capability.h +F: security/capability.c +F: security/commoncap.c + CELL BROADBAND ENGINE ARCHITECTURE M: Arnd Bergmann L: linuxppc-dev@lists.ozlabs.org @@ -2287,7 +2292,7 @@ F: drivers/acpi/dock.c DOCUMENTATION M: Randy Dunlap L: linux-doc@vger.kernel.org -T: quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/ +T: quilt http://xenotime.net/kernel-doc-patches/current/ S: Maintained F: Documentation/ @@ -2358,6 +2363,15 @@ S: Supported F: drivers/gpu/drm/exynos F: include/drm/exynos* +EXYNOS MIPI DISPLAY DRIVERS +M: Inki Dae +M: Donghwa Lee +M: Kyungmin Park +L: linux-fbdev@vger.kernel.org +S: Maintained +F: drivers/video/exynos/exynos_mipi* +F: include/video/exynos_mipi* + DSCC4 DRIVER M: Francois Romieu L: netdev@vger.kernel.org @@ -2852,6 +2866,12 @@ S: Maintained F: drivers/media/video/m5mols/ F: include/media/m5mols.h +FUJITSU TABLET EXTRAS +M: Robert Gerlach +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/x86/fujitsu-tablet.c + FUSE: FILESYSTEM IN USERSPACE M: Miklos Szeredi L: fuse-devel@lists.sourceforge.net @@ -3053,7 +3073,6 @@ F: drivers/hwspinlock/hwspinlock_* F: include/linux/hwspinlock.h HARMONY SOUND DRIVER -M: Kyle McMartin L: linux-parisc@vger.kernel.org S: Maintained F: sound/parisc/harmony.* @@ -3324,6 +3343,12 @@ S: Maintained F: net/ieee802154/ F: drivers/ieee802154/ +IIO SUBSYSTEM AND DRIVERS +M: Jonathan Cameron +L: linux-iio@vger.kernel.org +S: Maintained +F: drivers/staging/iio/ + IKANOS/ADI EAGLE ADSL USB DRIVER M: Matthieu Castet M: Stanislaw Gruszka @@ -3782,7 +3807,7 @@ F: Documentation/kdump/ KERNEL AUTOMOUNTER v4 (AUTOFS4) M: Ian Kent -L: autofs@linux.kernel.org +L: autofs@vger.kernel.org S: Maintained F: fs/autofs4/ @@ -3992,11 +4017,11 @@ M: Rusty Russell L: lguest@lists.ozlabs.org W: http://lguest.ozlabs.org/ S: Odd Fixes -F: Documentation/virtual/lguest/ +F: arch/x86/include/asm/lguest*.h F: arch/x86/lguest/ F: drivers/lguest/ F: include/linux/lguest*.h -F: arch/x86/include/asm/lguest*.h +F: tools/lguest/ LINUX FOR IBM pSERIES (RS/6000) M: Paul Mackerras @@ -4136,7 +4161,7 @@ L: linux-ntfs-dev@lists.sourceforge.net W: http://www.linux-ntfs.org/content/view/19/37/ S: Maintained F: Documentation/ldm.txt -F: fs/partitions/ldm.* +F: block/partitions/ldm.* LogFS M: Joern Engel @@ -4687,7 +4712,7 @@ NTFS FILESYSTEM M: Anton Altaparmakov L: linux-ntfs-dev@lists.sourceforge.net W: http://www.tuxera.com/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs.git S: Supported F: Documentation/filesystems/ntfs.txt F: fs/ntfs/ @@ -5000,9 +5025,8 @@ F: Documentation/blockdev/paride.txt F: drivers/block/paride/ PARISC ARCHITECTURE -M: Kyle McMartin -M: Helge Deller M: "James E.J. Bottomley" +M: Helge Deller L: linux-parisc@vger.kernel.org W: http://www.parisc-linux.org/ Q: http://patchwork.kernel.org/project/linux-parisc/list/ @@ -5633,7 +5657,7 @@ W: http://www.ibm.com/developerworks/linux/linux390/ S: Supported F: arch/s390/ F: drivers/s390/ -F: fs/partitions/ibm.c +F: block/partitions/ibm.c F: Documentation/s390/ F: Documentation/DocBook/s390* @@ -5856,12 +5880,13 @@ F: drivers/mmc/host/sdhci-s3c.c SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER M: Viresh Kumar +L: spear-devel@list.st.com L: linux-mmc@vger.kernel.org S: Maintained F: drivers/mmc/host/sdhci-spear.c SECURITY SUBSYSTEM -M: James Morris +M: James Morris L: linux-security-module@vger.kernel.org (suggested Cc:) T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git W: http://security.wiki.kernel.org/ @@ -5874,7 +5899,7 @@ S: Supported SELINUX SECURITY MODULE M: Stephen Smalley -M: James Morris +M: James Morris M: Eric Paris L: selinux@tycho.nsa.gov (subscribers-only, general discussion) W: http://selinuxproject.org @@ -6198,24 +6223,32 @@ F: drivers/tty/serial/sunzilog.h SPEAR PLATFORM SUPPORT M: Viresh Kumar +L: spear-devel@list.st.com +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/plat-spear/ SPEAR3XX MACHINE SUPPORT M: Viresh Kumar +L: spear-devel@list.st.com +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/mach-spear3xx/ SPEAR6XX MACHINE SUPPORT M: Rajeev Kumar +L: spear-devel@list.st.com +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/mach-spear6xx/ SPEAR CLOCK FRAMEWORK SUPPORT M: Viresh Kumar +L: spear-devel@list.st.com +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/mach-spear*/clock.c @@ -6224,6 +6257,8 @@ F: arch/arm/plat-spear/include/plat/clock.h SPEAR PAD MULTIPLEXING SUPPORT M: Viresh Kumar +L: spear-devel@list.st.com +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/plat-spear/include/plat/padmux.h @@ -6396,11 +6431,6 @@ M: Omar Ramirez Luna S: Odd Fixes F: drivers/staging/tidspbridge/ -STAGING - TRIDENT TVMASTER TMxxxx USB VIDEO CAPTURE DRIVERS -L: linux-media@vger.kernel.org -S: Odd Fixes -F: drivers/staging/tm6000/ - STAGING - USB ENE SM/MS CARD READER DRIVER M: Al Cho S: Odd Fixes @@ -7279,7 +7309,7 @@ WATCHDOG DEVICE DRIVERS M: Wim Van Sebroeck L: linux-watchdog@vger.kernel.org W: http://www.linux-watchdog.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git +T: git git://www.linux-watchdog.org/linux-watchdog.git S: Maintained F: Documentation/watchdog/ F: drivers/watchdog/ diff --git a/trunk/Makefile b/trunk/Makefile index e3b23e864a53..1932984478c1 100644 --- a/trunk/Makefile +++ b/trunk/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 3 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = NAME = Saber-toothed Squirrel # *DOCUMENTATION* diff --git a/trunk/arch/Kconfig b/trunk/arch/Kconfig index 4f55c736be11..5b448a74d0f7 100644 --- a/trunk/arch/Kconfig +++ b/trunk/arch/Kconfig @@ -47,18 +47,29 @@ config KPROBES If in doubt, say "N". config JUMP_LABEL - bool "Optimize trace point call sites" + bool "Optimize very unlikely/likely branches" depends on HAVE_ARCH_JUMP_LABEL help + This option enables a transparent branch optimization that + makes certain almost-always-true or almost-always-false branch + conditions even cheaper to execute within the kernel. + + Certain performance-sensitive kernel code, such as trace points, + scheduler functionality, networking code and KVM have such + branches and include support for this optimization technique. + If it is detected that the compiler has support for "asm goto", - the kernel will compile trace point locations with just a - nop instruction. When trace points are enabled, the nop will - be converted to a jump to the trace function. This technique - lowers overhead and stress on the branch prediction of the - processor. - - On i386, options added to the compiler flags may increase - the size of the kernel slightly. + the kernel will compile such branches with just a nop + instruction. When the condition flag is toggled to true, the + nop will be converted to a jump instruction to execute the + conditional block of instructions. + + This technique lowers overhead and stress on the branch prediction + of the processor and generally makes the kernel faster. The update + of the condition is slower, but those are always very rare. + + ( On 32-bit x86, the necessary options added to the compiler + flags may increase the size of the kernel slightly. ) config OPTPROBES def_bool y diff --git a/trunk/arch/alpha/include/asm/futex.h b/trunk/arch/alpha/include/asm/futex.h index e8a761aee088..f939794363ac 100644 --- a/trunk/arch/alpha/include/asm/futex.h +++ b/trunk/arch/alpha/include/asm/futex.h @@ -108,7 +108,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, " lda $31,3b-2b(%0)\n" " .previous\n" : "+r"(ret), "=&r"(prev), "=&r"(cmp) - : "r"(uaddr), "r"((long)oldval), "r"(newval) + : "r"(uaddr), "r"((long)(int)oldval), "r"(newval) : "memory"); *uval = prev; diff --git a/trunk/arch/alpha/kernel/perf_event.c b/trunk/arch/alpha/kernel/perf_event.c index 8143cd7cdbfb..0dae252f7a33 100644 --- a/trunk/arch/alpha/kernel/perf_event.c +++ b/trunk/arch/alpha/kernel/perf_event.c @@ -685,6 +685,10 @@ static int alpha_pmu_event_init(struct perf_event *event) { int err; + /* does not support taken branch sampling */ + if (has_branch_stack(event)) + return -EOPNOTSUPP; + switch (event->attr.type) { case PERF_TYPE_RAW: case PERF_TYPE_HARDWARE: diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig index a48aecc17eac..dfb0312f4e73 100644 --- a/trunk/arch/arm/Kconfig +++ b/trunk/arch/arm/Kconfig @@ -1280,7 +1280,7 @@ config ARM_ERRATA_743622 depends on CPU_V7 help This option enables the workaround for the 743622 Cortex-A9 - (r2p0..r2p2) erratum. Under very rare conditions, a faulty + (r2p*) erratum. Under very rare conditions, a faulty optimisation in the Cortex-A9 Store Buffer may lead to data corruption. This workaround sets a specific bit in the diagnostic register of the Cortex-A9 which disables the Store Buffer diff --git a/trunk/arch/arm/boot/.gitignore b/trunk/arch/arm/boot/.gitignore index ce1c5ff746e7..3c79f85975aa 100644 --- a/trunk/arch/arm/boot/.gitignore +++ b/trunk/arch/arm/boot/.gitignore @@ -3,3 +3,4 @@ zImage xipImage bootpImage uImage +*.dtb diff --git a/trunk/arch/arm/boot/dts/exynos4210.dtsi b/trunk/arch/arm/boot/dts/exynos4210.dtsi index 63d7578856c1..a1dd2ee83753 100644 --- a/trunk/arch/arm/boot/dts/exynos4210.dtsi +++ b/trunk/arch/arm/boot/dts/exynos4210.dtsi @@ -29,6 +29,7 @@ compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; + cpu-offset = <0x8000>; reg = <0x10490000 0x1000>, <0x10480000 0x100>; }; diff --git a/trunk/arch/arm/boot/dts/tegra-paz00.dts b/trunk/arch/arm/boot/dts/tegra-paz00.dts index 1a1d7023b69b..825d2957da0b 100644 --- a/trunk/arch/arm/boot/dts/tegra-paz00.dts +++ b/trunk/arch/arm/boot/dts/tegra-paz00.dts @@ -46,11 +46,11 @@ }; serial@70006200 { - status = "disable"; + clock-frequency = <216000000>; }; serial@70006300 { - clock-frequency = <216000000>; + status = "disable"; }; serial@70006400 { @@ -60,7 +60,7 @@ sdhci@c8000000 { cd-gpios = <&gpio 173 0>; /* gpio PV5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 169 0>; /* gpio PV1 */ }; sdhci@c8000200 { diff --git a/trunk/arch/arm/common/it8152.c b/trunk/arch/arm/common/it8152.c index d1bcd7b13ebc..fb1f1cfce60c 100644 --- a/trunk/arch/arm/common/it8152.c +++ b/trunk/arch/arm/common/it8152.c @@ -320,13 +320,6 @@ int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) return -EBUSY; } -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as we don't have even crappy BIOSes to set it properly. - * The implementation is from arch/i386/pci/i386.c - */ -unsigned int pcibios_max_latency = 255; - /* ITE bridge requires setting latency timer to avoid early bus access termination by PCI bus master devices */ diff --git a/trunk/arch/arm/common/pl330.c b/trunk/arch/arm/common/pl330.c index d8e44a43047c..ff3ad2244824 100644 --- a/trunk/arch/arm/common/pl330.c +++ b/trunk/arch/arm/common/pl330.c @@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) struct pl330_thread *thrd = ch_id; struct pl330_dmac *pl330; unsigned long flags; - int ret = 0, active = thrd->req_running; + int ret = 0, active; if (!thrd || thrd->free || thrd->dmac->state == DYING) return -EINVAL; pl330 = thrd->dmac; + active = thrd->req_running; spin_lock_irqsave(&pl330->lock, flags); diff --git a/trunk/arch/arm/include/asm/assembler.h b/trunk/arch/arm/include/asm/assembler.h index 62f8095d46de..23371b17b23e 100644 --- a/trunk/arch/arm/include/asm/assembler.h +++ b/trunk/arch/arm/include/asm/assembler.h @@ -137,6 +137,11 @@ disable_irq .endm + .macro save_and_disable_irqs_notrace, oldcpsr + mrs \oldcpsr, cpsr + disable_irq_notrace + .endm + /* * Restore interrupt state previously stored in a register. We don't * guarantee that this will preserve the flags. diff --git a/trunk/arch/arm/include/asm/hardware/pl330.h b/trunk/arch/arm/include/asm/hardware/pl330.h index 575fa8186ca0..c1821385abfa 100644 --- a/trunk/arch/arm/include/asm/hardware/pl330.h +++ b/trunk/arch/arm/include/asm/hardware/pl330.h @@ -41,7 +41,7 @@ enum pl330_dstcachectrl { DCCTRL1, /* Bufferable only */ DCCTRL2, /* Cacheable, but do not allocate */ DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1 = 8, + DINVALID1, /* AWCACHE = 0x1000 */ DINVALID2, DCCTRL6, /* Cacheable write-through, allocate on writes only */ DCCTRL7, /* Cacheable write-back, allocate on writes only */ diff --git a/trunk/arch/arm/include/asm/pmu.h b/trunk/arch/arm/include/asm/pmu.h index b5a5be2536c1..90114faa9f3c 100644 --- a/trunk/arch/arm/include/asm/pmu.h +++ b/trunk/arch/arm/include/asm/pmu.h @@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type); u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, - int idx, int overflow); + int idx); int armpmu_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, diff --git a/trunk/arch/arm/include/asm/processor.h b/trunk/arch/arm/include/asm/processor.h index ce280b8d613c..cb8d638924fd 100644 --- a/trunk/arch/arm/include/asm/processor.h +++ b/trunk/arch/arm/include/asm/processor.h @@ -22,6 +22,7 @@ #include #include #include +#include #ifdef __KERNEL__ #define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ diff --git a/trunk/arch/arm/include/asm/tlb.h b/trunk/arch/arm/include/asm/tlb.h index 5d3ed7e38561..314d4664eae7 100644 --- a/trunk/arch/arm/include/asm/tlb.h +++ b/trunk/arch/arm/include/asm/tlb.h @@ -198,7 +198,15 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr) { pgtable_page_dtor(pte); - tlb_add_flush(tlb, addr); + + /* + * With the classic ARM MMU, a pte page has two corresponding pmd + * entries, each covering 1MB. + */ + addr &= PMD_MASK; + tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE); + tlb_add_flush(tlb, addr + SZ_1M); + tlb_remove_page(tlb, pte); } diff --git a/trunk/arch/arm/kernel/ecard.c b/trunk/arch/arm/kernel/ecard.c index 4dd0edab6a65..1651d4950744 100644 --- a/trunk/arch/arm/kernel/ecard.c +++ b/trunk/arch/arm/kernel/ecard.c @@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm) memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE)); + vma.vm_flags = VM_EXEC; vma.vm_mm = mm; flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE); diff --git a/trunk/arch/arm/kernel/entry-armv.S b/trunk/arch/arm/kernel/entry-armv.S index 3a456c6c7005..be16a48007b4 100644 --- a/trunk/arch/arm/kernel/entry-armv.S +++ b/trunk/arch/arm/kernel/entry-armv.S @@ -790,7 +790,7 @@ __kuser_cmpxchg64: @ 0xffff0f60 smp_dmb arm rsbs r0, r3, #0 @ set returned val and C flag ldmfd sp!, {r4, r5, r6, r7} - bx lr + usr_ret lr #elif !defined(CONFIG_SMP) diff --git a/trunk/arch/arm/kernel/perf_event.c b/trunk/arch/arm/kernel/perf_event.c index 5bb91bf3d47f..8a89d3b7626b 100644 --- a/trunk/arch/arm/kernel/perf_event.c +++ b/trunk/arch/arm/kernel/perf_event.c @@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event, u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, - int idx, int overflow) + int idx) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); u64 delta, prev_raw_count, new_raw_count; @@ -193,13 +193,7 @@ armpmu_event_update(struct perf_event *event, new_raw_count) != prev_raw_count) goto again; - new_raw_count &= armpmu->max_period; - prev_raw_count &= armpmu->max_period; - - if (overflow) - delta = armpmu->max_period - prev_raw_count + new_raw_count + 1; - else - delta = new_raw_count - prev_raw_count; + delta = (new_raw_count - prev_raw_count) & armpmu->max_period; local64_add(delta, &event->count); local64_sub(delta, &hwc->period_left); @@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event) if (hwc->idx < 0) return; - armpmu_event_update(event, hwc, hwc->idx, 0); + armpmu_event_update(event, hwc, hwc->idx); } static void @@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags) if (!(hwc->state & PERF_HES_STOPPED)) { armpmu->disable(hwc, hwc->idx); barrier(); /* why? */ - armpmu_event_update(event, hwc, hwc->idx, 0); + armpmu_event_update(event, hwc, hwc->idx); hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; } } @@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event) hwc->config_base |= (unsigned long)mapping; if (!hwc->sample_period) { - hwc->sample_period = armpmu->max_period; + /* + * For non-sampling runs, limit the sample_period to half + * of the counter width. That way, the new counter value + * is far less likely to overtake the previous one unless + * you have some serious IRQ latency issues. + */ + hwc->sample_period = armpmu->max_period >> 1; hwc->last_period = hwc->sample_period; local64_set(&hwc->period_left, hwc->sample_period); } @@ -539,6 +539,10 @@ static int armpmu_event_init(struct perf_event *event) int err = 0; atomic_t *active_events = &armpmu->active_events; + /* does not support taken branch sampling */ + if (has_branch_stack(event)) + return -EOPNOTSUPP; + if (armpmu->map_event(event) == -ENOENT) return -ENOENT; @@ -679,6 +683,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu) armpmu->type = ARM_PMU_DEVICE_CPU; } +/* + * PMU hardware loses all context when a CPU goes offline. + * When a CPU is hotplugged back in, since some hardware registers are + * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading + * junk values out of them. + */ +static int __cpuinit pmu_cpu_notify(struct notifier_block *b, + unsigned long action, void *hcpu) +{ + if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) + return NOTIFY_DONE; + + if (cpu_pmu && cpu_pmu->reset) + cpu_pmu->reset(NULL); + + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata pmu_cpu_notifier = { + .notifier_call = pmu_cpu_notify, +}; + /* * CPU PMU identification and registration. */ @@ -730,6 +756,7 @@ init_hw_perf_events(void) pr_info("enabled with %s PMU driver, %d counters available\n", cpu_pmu->name, cpu_pmu->num_events); cpu_pmu_init(cpu_pmu); + register_cpu_notifier(&pmu_cpu_notifier); armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW); } else { pr_info("no hardware support available\n"); diff --git a/trunk/arch/arm/kernel/perf_event_v6.c b/trunk/arch/arm/kernel/perf_event_v6.c index 533be9930ec2..b78af0cc6ef3 100644 --- a/trunk/arch/arm/kernel/perf_event_v6.c +++ b/trunk/arch/arm/kernel/perf_event_v6.c @@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc, raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } -static int counter_is_active(unsigned long pmcr, int idx) -{ - unsigned long mask = 0; - if (idx == ARMV6_CYCLE_COUNTER) - mask = ARMV6_PMCR_CCOUNT_IEN; - else if (idx == ARMV6_COUNTER0) - mask = ARMV6_PMCR_COUNT0_IEN; - else if (idx == ARMV6_COUNTER1) - mask = ARMV6_PMCR_COUNT1_IEN; - - if (mask) - return pmcr & mask; - - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return 0; -} - static irqreturn_t armv6pmu_handle_irq(int irq_num, void *dev) @@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num, struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!counter_is_active(pmcr, idx)) + /* Ignore if we don't have an event. */ + if (!event) continue; /* @@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num, continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; diff --git a/trunk/arch/arm/kernel/perf_event_v7.c b/trunk/arch/arm/kernel/perf_event_v7.c index 460bbbb6b885..4d7095af2ab3 100644 --- a/trunk/arch/arm/kernel/perf_event_v7.c +++ b/trunk/arch/arm/kernel/perf_event_v7.c @@ -469,6 +469,20 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, }; /* @@ -579,6 +593,20 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, }; /* @@ -781,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx) counter = ARMV7_IDX_TO_COUNTER(idx); asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter))); + isb(); + /* Clear the overflow flag in case an interrupt is pending. */ + asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter))); + isb(); + return idx; } @@ -927,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; + /* Ignore if we don't have an event. */ + if (!event) + continue; + /* * We have a single interrupt for all counters. Check that * each counter has overflowed before we process it. @@ -935,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; diff --git a/trunk/arch/arm/kernel/perf_event_xscale.c b/trunk/arch/arm/kernel/perf_event_xscale.c index 3b99d8269829..71a21e6712f5 100644 --- a/trunk/arch/arm/kernel/perf_event_xscale.c +++ b/trunk/arch/arm/kernel/perf_event_xscale.c @@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; + if (!event) + continue; + if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; @@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev) struct perf_event *event = cpuc->events[idx]; struct hw_perf_event *hwc; - if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) + if (!event) + continue; + + if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx)) continue; hwc = &event->hw; - armpmu_event_update(event, hwc, idx, 1); + armpmu_event_update(event, hwc, idx); data.period = event->hw.last_period; if (!armpmu_event_set_period(event, hwc, idx)) continue; @@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) static void xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) { - unsigned long flags, ien, evtsel; + unsigned long flags, ien, evtsel, of_flags; struct pmu_hw_events *events = cpu_pmu->get_hw_events(); ien = xscale2pmu_read_int_enable(); @@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) switch (idx) { case XSCALE_CYCLE_COUNTER: ien &= ~XSCALE2_CCOUNT_INT_EN; + of_flags = XSCALE2_CCOUNT_OVERFLOW; break; case XSCALE_COUNTER0: ien &= ~XSCALE2_COUNT0_INT_EN; evtsel &= ~XSCALE2_COUNT0_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; + of_flags = XSCALE2_COUNT0_OVERFLOW; break; case XSCALE_COUNTER1: ien &= ~XSCALE2_COUNT1_INT_EN; evtsel &= ~XSCALE2_COUNT1_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; + of_flags = XSCALE2_COUNT1_OVERFLOW; break; case XSCALE_COUNTER2: ien &= ~XSCALE2_COUNT2_INT_EN; evtsel &= ~XSCALE2_COUNT2_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; + of_flags = XSCALE2_COUNT2_OVERFLOW; break; case XSCALE_COUNTER3: ien &= ~XSCALE2_COUNT3_INT_EN; evtsel &= ~XSCALE2_COUNT3_EVT_MASK; evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; + of_flags = XSCALE2_COUNT3_OVERFLOW; break; default: WARN_ONCE(1, "invalid counter number (%d)\n", idx); @@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) raw_spin_lock_irqsave(&events->pmu_lock, flags); xscale2pmu_write_event_select(evtsel); xscale2pmu_write_int_enable(ien); + xscale2pmu_write_overflow_flags(of_flags); raw_spin_unlock_irqrestore(&events->pmu_lock, flags); } diff --git a/trunk/arch/arm/kernel/process.c b/trunk/arch/arm/kernel/process.c index 971d65c253a9..c2ae3cd331fe 100644 --- a/trunk/arch/arm/kernel/process.c +++ b/trunk/arch/arm/kernel/process.c @@ -239,9 +239,7 @@ void cpu_idle(void) leds_event(led_idle_end); rcu_idle_exit(); tick_nohz_idle_exit(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); + schedule_preempt_disabled(); } } diff --git a/trunk/arch/arm/kernel/ptrace.c b/trunk/arch/arm/kernel/ptrace.c index e1d5e1929fbd..ede6443c34d9 100644 --- a/trunk/arch/arm/kernel/ptrace.c +++ b/trunk/arch/arm/kernel/ptrace.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -699,10 +700,13 @@ static int vfp_set(struct task_struct *target, { int ret; struct thread_info *thread = task_thread_info(target); - struct vfp_hard_struct new_vfp = thread->vfpstate.hard; + struct vfp_hard_struct new_vfp; const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs); const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr); + vfp_sync_hwstate(thread); + new_vfp = thread->vfpstate.hard; + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &new_vfp.fpregs, user_fpregs_offset, @@ -723,9 +727,8 @@ static int vfp_set(struct task_struct *target, if (ret) return ret; - vfp_sync_hwstate(thread); - thread->vfpstate.hard = new_vfp; vfp_flush_hwstate(thread); + thread->vfpstate.hard = new_vfp; return 0; } @@ -902,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } +#ifdef __ARMEB__ +#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB +#else +#define AUDIT_ARCH_NR AUDIT_ARCH_ARM +#endif + asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; @@ -916,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) if (!ip) audit_syscall_exit(regs); else - audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0, + audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); if (!test_thread_flag(TIF_SYSCALL_TRACE)) diff --git a/trunk/arch/arm/kernel/signal.c b/trunk/arch/arm/kernel/signal.c index 0340224cf73c..9e617bd4a146 100644 --- a/trunk/arch/arm/kernel/signal.c +++ b/trunk/arch/arm/kernel/signal.c @@ -227,6 +227,8 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE) return -EINVAL; + vfp_flush_hwstate(thread); + /* * Copy the floating point registers. There can be unused * registers see asm/hwcap.h for details. @@ -251,9 +253,6 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); - if (!err) - vfp_flush_hwstate(thread); - return err ? -EFAULT : 0; } diff --git a/trunk/arch/arm/kernel/smp.c b/trunk/arch/arm/kernel/smp.c index cdeb727527d3..d616ed51e7a7 100644 --- a/trunk/arch/arm/kernel/smp.c +++ b/trunk/arch/arm/kernel/smp.c @@ -295,13 +295,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void) */ percpu_timer_setup(); - while (!cpu_active(cpu)) - cpu_relax(); - - /* - * cpu_active bit is set, so it's safe to enalbe interrupts - * now. - */ local_irq_enable(); local_fiq_enable(); diff --git a/trunk/arch/arm/kernel/smp_twd.c b/trunk/arch/arm/kernel/smp_twd.c index 4285daa077b0..7a79b24597b2 100644 --- a/trunk/arch/arm/kernel/smp_twd.c +++ b/trunk/arch/arm/kernel/smp_twd.c @@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = { static int twd_cpufreq_init(void) { - if (!IS_ERR(twd_clk)) + if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) return cpufreq_register_notifier(&twd_cpufreq_nb, CPUFREQ_TRANSITION_NOTIFIER); diff --git a/trunk/arch/arm/kernel/traps.c b/trunk/arch/arm/kernel/traps.c index 99a572702509..f84dfe67724f 100644 --- a/trunk/arch/arm/kernel/traps.c +++ b/trunk/arch/arm/kernel/traps.c @@ -266,6 +266,7 @@ void die(const char *str, struct pt_regs *regs, int err) { struct thread_info *thread = current_thread_info(); int ret; + enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE; oops_enter(); @@ -273,7 +274,9 @@ void die(const char *str, struct pt_regs *regs, int err) console_verbose(); bust_spinlocks(1); if (!user_mode(regs)) - report_bug(regs->ARM_pc, regs); + bug_type = report_bug(regs->ARM_pc, regs); + if (bug_type != BUG_TRAP_TYPE_NONE) + str = "Oops - BUG"; ret = __die(str, err, thread, regs); if (regs && kexec_should_crash(thread->task)) diff --git a/trunk/arch/arm/kernel/vmlinux.lds.S b/trunk/arch/arm/kernel/vmlinux.lds.S index 1e19691e0406..43a31fb06318 100644 --- a/trunk/arch/arm/kernel/vmlinux.lds.S +++ b/trunk/arch/arm/kernel/vmlinux.lds.S @@ -10,6 +10,7 @@ #include #define PROC_INFO \ + . = ALIGN(4); \ VMLINUX_SYMBOL(__proc_info_begin) = .; \ *(.proc.info.init) \ VMLINUX_SYMBOL(__proc_info_end) = .; diff --git a/trunk/arch/arm/mach-at91/at91rm9200_devices.c b/trunk/arch/arm/mach-at91/at91rm9200_devices.c index 18bacec2b094..97676bdae998 100644 --- a/trunk/arch/arm/mach-at91/at91rm9200_devices.c +++ b/trunk/arch/arm/mach-at91/at91rm9200_devices.c @@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/trunk/arch/arm/mach-at91/at91sam9260_devices.c b/trunk/arch/arm/mach-at91/at91sam9260_devices.c index 642ccb6d26b2..5a24f0b4554d 100644 --- a/trunk/arch/arm/mach-at91/at91sam9260_devices.c +++ b/trunk/arch/arm/mach-at91/at91sam9260_devices.c @@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -1215,8 +1215,7 @@ void __init at91_add_device_serial(void) {} * CF/IDE * -------------------------------------------------------------------- */ -#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \ - defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ +#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) static struct at91_cf_data cf0_data; @@ -1313,10 +1312,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data) if (data->flags & AT91_CF_TRUE_IDE) #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) pdev->name = "pata_at91"; -#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) - pdev->name = "at91_ide"; #else -#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91" +#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91" #endif else pdev->name = "at91_cf"; diff --git a/trunk/arch/arm/mach-at91/at91sam9261_devices.c b/trunk/arch/arm/mach-at91/at91sam9261_devices.c index fc59cbdb0e3c..1e28bed8f425 100644 --- a/trunk/arch/arm/mach-at91/at91sam9261_devices.c +++ b/trunk/arch/arm/mach-at91/at91sam9261_devices.c @@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/trunk/arch/arm/mach-at91/at91sam9263_devices.c b/trunk/arch/arm/mach-at91/at91sam9263_devices.c index 7b46b2787022..366a7765635b 100644 --- a/trunk/arch/arm/mach-at91/at91sam9263_devices.c +++ b/trunk/arch/arm/mach-at91/at91sam9263_devices.c @@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_AT91 +#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) static struct at91_udc_data udc_data; static struct resource udc_resources[] = { @@ -355,8 +355,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * Compact Flash (PCMCIA or IDE) * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \ - defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) +#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ + defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) static struct at91_cf_data cf0_data; @@ -450,7 +450,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */ at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */ - pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf"; + pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf"; platform_device_register(pdev); } #else diff --git a/trunk/arch/arm/mach-at91/at91sam9g45_devices.c b/trunk/arch/arm/mach-at91/at91sam9g45_devices.c index b7582dd10dc3..96e2adcd5a84 100644 --- a/trunk/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/trunk/arch/arm/mach-at91/at91sam9g45_devices.c @@ -38,10 +38,6 @@ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) static u64 hdmac_dmamask = DMA_BIT_MASK(32); -static struct at_dma_platform_data atdma_pdata = { - .nr_channels = 8, -}; - static struct resource hdmac_resources[] = { [0] = { .start = AT91SAM9G45_BASE_DMA, @@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = { }; static struct platform_device at_hdmac_device = { - .name = "at_hdmac", + .name = "at91sam9g45_dma", .id = -1, .dev = { .dma_mask = &hdmac_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &atdma_pdata, }, .resource = hdmac_resources, .num_resources = ARRAY_SIZE(hdmac_resources), @@ -69,9 +64,15 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); - dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask); - platform_device_register(&at_hdmac_device); +#if defined(CONFIG_OF) + struct device_node *of_node = + of_find_node_by_name(NULL, "dma-controller"); + + if (of_node) + of_node_put(of_node); + else +#endif + platform_device_register(&at_hdmac_device); } #else void __init at91_add_device_hdmac(void) {} diff --git a/trunk/arch/arm/mach-at91/at91sam9rl_devices.c b/trunk/arch/arm/mach-at91/at91sam9rl_devices.c index 61908dce9784..9be71c11d0f0 100644 --- a/trunk/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/trunk/arch/arm/mach-at91/at91sam9rl_devices.c @@ -33,10 +33,6 @@ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) static u64 hdmac_dmamask = DMA_BIT_MASK(32); -static struct at_dma_platform_data atdma_pdata = { - .nr_channels = 2, -}; - static struct resource hdmac_resources[] = { [0] = { .start = AT91SAM9RL_BASE_DMA, @@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = { }; static struct platform_device at_hdmac_device = { - .name = "at_hdmac", + .name = "at91sam9rl_dma", .id = -1, .dev = { .dma_mask = &hdmac_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &atdma_pdata, }, .resource = hdmac_resources, .num_resources = ARRAY_SIZE(hdmac_resources), @@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); platform_device_register(&at_hdmac_device); } #else diff --git a/trunk/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/trunk/arch/arm/mach-at91/include/mach/at91sam9_smc.h index eb18a70fa647..175e1fdd9fe8 100644 --- a/trunk/arch/arm/mach-at91/include/mach/at91sam9_smc.h +++ b/trunk/arch/arm/mach-at91/include/mach/at91sam9_smc.h @@ -18,6 +18,35 @@ #include +#ifndef __ASSEMBLY__ +struct sam9_smc_config { + /* Setup register */ + u8 ncs_read_setup; + u8 nrd_setup; + u8 ncs_write_setup; + u8 nwe_setup; + + /* Pulse register */ + u8 ncs_read_pulse; + u8 nrd_pulse; + u8 ncs_write_pulse; + u8 nwe_pulse; + + /* Cycle register */ + u16 read_cycle; + u16 write_cycle; + + /* Mode register */ + u32 mode; + u8 tdf_cycles:4; +}; + +extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config); +extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config); +#endif + #define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */ #define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ #define AT91_SMC_NWESETUP_(x) ((x) << 0) diff --git a/trunk/arch/arm/mach-at91/sam9_smc.c b/trunk/arch/arm/mach-at91/sam9_smc.c index 8294783b679d..99a0a1d2b7dc 100644 --- a/trunk/arch/arm/mach-at91/sam9_smc.c +++ b/trunk/arch/arm/mach-at91/sam9_smc.c @@ -2,6 +2,7 @@ * linux/arch/arm/mach-at91/sam9_smc.c * * Copyright (C) 2008 Andrew Victor + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -22,7 +23,22 @@ static void __iomem *smc_base_addr[2]; -static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config) +static void sam9_smc_cs_write_mode(void __iomem *base, + struct sam9_smc_config *config) +{ + __raw_writel(config->mode + | AT91_SMC_TDF_(config->tdf_cycles), + base + AT91_SMC_MODE); +} + +void sam9_smc_write_mode(int id, int cs, + struct sam9_smc_config *config) +{ + sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config); +} + +static void sam9_smc_cs_configure(void __iomem *base, + struct sam9_smc_config *config) { /* Setup register */ @@ -45,16 +61,66 @@ static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_con base + AT91_SMC_CYCLE); /* Mode register */ - __raw_writel(config->mode - | AT91_SMC_TDF_(config->tdf_cycles), - base + AT91_SMC_MODE); + sam9_smc_cs_write_mode(base, config); } -void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config) +void sam9_smc_configure(int id, int cs, + struct sam9_smc_config *config) { sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config); } +static void sam9_smc_cs_read_mode(void __iomem *base, + struct sam9_smc_config *config) +{ + u32 val = __raw_readl(base + AT91_SMC_MODE); + + config->mode = (val & ~AT91_SMC_NWECYCLE); + config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ; +} + +void sam9_smc_read_mode(int id, int cs, + struct sam9_smc_config *config) +{ + sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config); +} + +static void sam9_smc_cs_read(void __iomem *base, + struct sam9_smc_config *config) +{ + u32 val; + + /* Setup register */ + val = __raw_readl(base + AT91_SMC_SETUP); + + config->nwe_setup = val & AT91_SMC_NWESETUP; + config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8; + config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16; + config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24; + + /* Pulse register */ + val = __raw_readl(base + AT91_SMC_PULSE); + + config->nwe_setup = val & AT91_SMC_NWEPULSE; + config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8; + config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16; + config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24; + + /* Cycle register */ + val = __raw_readl(base + AT91_SMC_CYCLE); + + config->write_cycle = val & AT91_SMC_NWECYCLE; + config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16; + + /* Mode register */ + sam9_smc_cs_read_mode(base, config); +} + +void sam9_smc_read(int id, int cs, struct sam9_smc_config *config) +{ + sam9_smc_cs_read(AT91_SMC_CS(id, cs), config); +} + void __init at91sam9_ioremap_smc(int id, u32 addr) { if (id > 1) { diff --git a/trunk/arch/arm/mach-at91/sam9_smc.h b/trunk/arch/arm/mach-at91/sam9_smc.h index 039c5ce17aec..3e52dcd4a59f 100644 --- a/trunk/arch/arm/mach-at91/sam9_smc.h +++ b/trunk/arch/arm/mach-at91/sam9_smc.h @@ -8,27 +8,4 @@ * published by the Free Software Foundation. */ -struct sam9_smc_config { - /* Setup register */ - u8 ncs_read_setup; - u8 nrd_setup; - u8 ncs_write_setup; - u8 nwe_setup; - - /* Pulse register */ - u8 ncs_read_pulse; - u8 nrd_pulse; - u8 ncs_write_pulse; - u8 nwe_pulse; - - /* Cycle register */ - u16 read_cycle; - u16 write_cycle; - - /* Mode register */ - u32 mode; - u8 tdf_cycles:4; -}; - -extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config); extern void __init at91sam9_ioremap_smc(int id, u32 addr); diff --git a/trunk/arch/arm/mach-bcmring/arch.c b/trunk/arch/arm/mach-bcmring/arch.c index 9e5e7552498c..45c97b1ee9b1 100644 --- a/trunk/arch/arm/mach-bcmring/arch.c +++ b/trunk/arch/arm/mach-bcmring/arch.c @@ -194,6 +194,6 @@ MACHINE_START(BCMRING, "BCMRING") .init_early = bcmring_init_early, .init_irq = bcmring_init_irq, .timer = &bcmring_timer, - .init_machine = bcmring_init_machine + .init_machine = bcmring_init_machine, .restart = bcmring_restart, MACHINE_END diff --git a/trunk/arch/arm/mach-bcmring/dma.c b/trunk/arch/arm/mach-bcmring/dma.c index 1a1a27dd5654..1024396797e1 100644 --- a/trunk/arch/arm/mach-bcmring/dma.c +++ b/trunk/arch/arm/mach-bcmring/dma.c @@ -33,17 +33,11 @@ #include -#include #include #include #include #include -/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */ -/* especially since dc4 doesn't use kmalloc'd memory. */ - -#define ALLOW_MAP_OF_KMALLOC_MEMORY 0 - /* ---- Public Variables ------------------------------------------------- */ /* ---- Private Constants and Types -------------------------------------- */ @@ -53,58 +47,18 @@ #define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f) #define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f) -#define DMA_MAP_DEBUG 0 - -#if DMA_MAP_DEBUG -# define DMA_MAP_PRINT(fmt, args...) printk("%s: " fmt, __func__, ## args) -#else -# define DMA_MAP_PRINT(fmt, args...) -#endif /* ---- Private Variables ------------------------------------------------ */ static DMA_Global_t gDMA; static struct proc_dir_entry *gDmaDir; -static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0); -static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0); -static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0); -static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0); - #include "dma_device.c" /* ---- Private Function Prototypes -------------------------------------- */ /* ---- Functions ------------------------------------------------------- */ -/****************************************************************************/ -/** -* Displays information for /proc/dma/mem-type -*/ -/****************************************************************************/ - -static int dma_proc_read_mem_type(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - int len = 0; - - len += sprintf(buf + len, "dma_map_mem statistics\n"); - len += - sprintf(buf + len, "coherent: %d\n", - atomic_read(&gDmaStatMemTypeCoherent)); - len += - sprintf(buf + len, "kmalloc: %d\n", - atomic_read(&gDmaStatMemTypeKmalloc)); - len += - sprintf(buf + len, "vmalloc: %d\n", - atomic_read(&gDmaStatMemTypeVmalloc)); - len += - sprintf(buf + len, "user: %d\n", - atomic_read(&gDmaStatMemTypeUser)); - - return len; -} - /****************************************************************************/ /** * Displays information for /proc/dma/channels @@ -846,8 +800,6 @@ int dma_init(void) dma_proc_read_channels, NULL); create_proc_read_entry("devices", 0, gDmaDir, dma_proc_read_devices, NULL); - create_proc_read_entry("mem-type", 0, gDmaDir, - dma_proc_read_mem_type, NULL); } out: @@ -1565,767 +1517,3 @@ int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. } EXPORT_SYMBOL(dma_set_device_handler); - -/****************************************************************************/ -/** -* Initializes a memory mapping structure -*/ -/****************************************************************************/ - -int dma_init_mem_map(DMA_MemMap_t *memMap) -{ - memset(memMap, 0, sizeof(*memMap)); - - sema_init(&memMap->lock, 1); - - return 0; -} - -EXPORT_SYMBOL(dma_init_mem_map); - -/****************************************************************************/ -/** -* Releases any memory currently being held by a memory mapping structure. -*/ -/****************************************************************************/ - -int dma_term_mem_map(DMA_MemMap_t *memMap) -{ - down(&memMap->lock); /* Just being paranoid */ - - /* Free up any allocated memory */ - - up(&memMap->lock); - memset(memMap, 0, sizeof(*memMap)); - - return 0; -} - -EXPORT_SYMBOL(dma_term_mem_map); - -/****************************************************************************/ -/** -* Looks at a memory address and categorizes it. -* -* @return One of the values from the DMA_MemType_t enumeration. -*/ -/****************************************************************************/ - -DMA_MemType_t dma_mem_type(void *addr) -{ - unsigned long addrVal = (unsigned long)addr; - - if (addrVal >= CONSISTENT_BASE) { - /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */ - - /* dma_alloc_xxx pages are physically and virtually contiguous */ - - return DMA_MEM_TYPE_DMA; - } - - /* Technically, we could add one more classification. Addresses between VMALLOC_END */ - /* and the beginning of the DMA virtual address could be considered to be I/O space. */ - /* Right now, nobody cares about this particular classification, so we ignore it. */ - - if (is_vmalloc_addr(addr)) { - /* Address comes from the vmalloc'd region. Pages are virtually */ - /* contiguous but NOT physically contiguous */ - - return DMA_MEM_TYPE_VMALLOC; - } - - if (addrVal >= PAGE_OFFSET) { - /* PAGE_OFFSET is typically 0xC0000000 */ - - /* kmalloc'd pages are physically contiguous */ - - return DMA_MEM_TYPE_KMALLOC; - } - - return DMA_MEM_TYPE_USER; -} - -EXPORT_SYMBOL(dma_mem_type); - -/****************************************************************************/ -/** -* Looks at a memory address and determines if we support DMA'ing to/from -* that type of memory. -* -* @return boolean - -* return value != 0 means dma supported -* return value == 0 means dma not supported -*/ -/****************************************************************************/ - -int dma_mem_supports_dma(void *addr) -{ - DMA_MemType_t memType = dma_mem_type(addr); - - return (memType == DMA_MEM_TYPE_DMA) -#if ALLOW_MAP_OF_KMALLOC_MEMORY - || (memType == DMA_MEM_TYPE_KMALLOC) -#endif - || (memType == DMA_MEM_TYPE_USER); -} - -EXPORT_SYMBOL(dma_mem_supports_dma); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ) { - int rc; - - down(&memMap->lock); - - DMA_MAP_PRINT("memMap: %p\n", memMap); - - if (memMap->inUse) { - printk(KERN_ERR "%s: memory map %p is already being used\n", - __func__, memMap); - rc = -EBUSY; - goto out; - } - - memMap->inUse = 1; - memMap->dir = dir; - memMap->numRegionsUsed = 0; - - rc = 0; - -out: - - DMA_MAP_PRINT("returning %d", rc); - - up(&memMap->lock); - - return rc; -} - -EXPORT_SYMBOL(dma_map_start); - -/****************************************************************************/ -/** -* Adds a segment of memory to a memory map. Each segment is both -* physically and virtually contiguous. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -static int dma_map_add_segment(DMA_MemMap_t *memMap, /* Stores state information about the map */ - DMA_Region_t *region, /* Region that the segment belongs to */ - void *virtAddr, /* Virtual address of the segment being added */ - dma_addr_t physAddr, /* Physical address of the segment being added */ - size_t numBytes /* Number of bytes of the segment being added */ - ) { - DMA_Segment_t *segment; - - DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr, - physAddr, numBytes); - - /* Sanity check */ - - if (((unsigned long)virtAddr < (unsigned long)region->virtAddr) - || (((unsigned long)virtAddr + numBytes)) > - ((unsigned long)region->virtAddr + region->numBytes)) { - printk(KERN_ERR - "%s: virtAddr %p is outside region @ %p len: %d\n", - __func__, virtAddr, region->virtAddr, region->numBytes); - return -EINVAL; - } - - if (region->numSegmentsUsed > 0) { - /* Check to see if this segment is physically contiguous with the previous one */ - - segment = ®ion->segment[region->numSegmentsUsed - 1]; - - if ((segment->physAddr + segment->numBytes) == physAddr) { - /* It is - just add on to the end */ - - DMA_MAP_PRINT("appending %d bytes to last segment\n", - numBytes); - - segment->numBytes += numBytes; - - return 0; - } - } - - /* Reallocate to hold more segments, if required. */ - - if (region->numSegmentsUsed >= region->numSegmentsAllocated) { - DMA_Segment_t *newSegment; - size_t oldSize = - region->numSegmentsAllocated * sizeof(*newSegment); - int newAlloc = region->numSegmentsAllocated + 4; - size_t newSize = newAlloc * sizeof(*newSegment); - - newSegment = kmalloc(newSize, GFP_KERNEL); - if (newSegment == NULL) { - return -ENOMEM; - } - memcpy(newSegment, region->segment, oldSize); - memset(&((uint8_t *) newSegment)[oldSize], 0, - newSize - oldSize); - kfree(region->segment); - - region->numSegmentsAllocated = newAlloc; - region->segment = newSegment; - } - - segment = ®ion->segment[region->numSegmentsUsed]; - region->numSegmentsUsed++; - - segment->virtAddr = virtAddr; - segment->physAddr = physAddr; - segment->numBytes = numBytes; - - DMA_MAP_PRINT("returning success\n"); - - return 0; -} - -/****************************************************************************/ -/** -* Adds a region of memory to a memory map. Each region is virtually -* contiguous, but not necessarily physically contiguous. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *mem, /* Virtual address that we want to get a map of */ - size_t numBytes /* Number of bytes being mapped */ - ) { - unsigned long addr = (unsigned long)mem; - unsigned int offset; - int rc = 0; - DMA_Region_t *region; - dma_addr_t physAddr; - - down(&memMap->lock); - - DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes); - - if (!memMap->inUse) { - printk(KERN_ERR "%s: Make sure you call dma_map_start first\n", - __func__); - rc = -EINVAL; - goto out; - } - - /* Reallocate to hold more regions. */ - - if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) { - DMA_Region_t *newRegion; - size_t oldSize = - memMap->numRegionsAllocated * sizeof(*newRegion); - int newAlloc = memMap->numRegionsAllocated + 4; - size_t newSize = newAlloc * sizeof(*newRegion); - - newRegion = kmalloc(newSize, GFP_KERNEL); - if (newRegion == NULL) { - rc = -ENOMEM; - goto out; - } - memcpy(newRegion, memMap->region, oldSize); - memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize); - - kfree(memMap->region); - - memMap->numRegionsAllocated = newAlloc; - memMap->region = newRegion; - } - - region = &memMap->region[memMap->numRegionsUsed]; - memMap->numRegionsUsed++; - - offset = addr & ~PAGE_MASK; - - region->memType = dma_mem_type(mem); - region->virtAddr = mem; - region->numBytes = numBytes; - region->numSegmentsUsed = 0; - region->numLockedPages = 0; - region->lockedPages = NULL; - - switch (region->memType) { - case DMA_MEM_TYPE_VMALLOC: - { - atomic_inc(&gDmaStatMemTypeVmalloc); - - /* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */ - - /* vmalloc'd pages are not physically contiguous */ - - rc = -EINVAL; - break; - } - - case DMA_MEM_TYPE_KMALLOC: - { - atomic_inc(&gDmaStatMemTypeKmalloc); - - /* kmalloc'd pages are physically contiguous, so they'll have exactly */ - /* one segment */ - -#if ALLOW_MAP_OF_KMALLOC_MEMORY - physAddr = - dma_map_single(NULL, mem, numBytes, memMap->dir); - rc = dma_map_add_segment(memMap, region, mem, physAddr, - numBytes); -#else - rc = -EINVAL; -#endif - break; - } - - case DMA_MEM_TYPE_DMA: - { - /* dma_alloc_xxx pages are physically contiguous */ - - atomic_inc(&gDmaStatMemTypeCoherent); - - physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset; - - dma_sync_single_for_cpu(NULL, physAddr, numBytes, - memMap->dir); - rc = dma_map_add_segment(memMap, region, mem, physAddr, - numBytes); - break; - } - - case DMA_MEM_TYPE_USER: - { - size_t firstPageOffset; - size_t firstPageSize; - struct page **pages; - struct task_struct *userTask; - - atomic_inc(&gDmaStatMemTypeUser); - -#if 1 - /* If the pages are user pages, then the dma_mem_map_set_user_task function */ - /* must have been previously called. */ - - if (memMap->userTask == NULL) { - printk(KERN_ERR - "%s: must call dma_mem_map_set_user_task when using user-mode memory\n", - __func__); - return -EINVAL; - } - - /* User pages need to be locked. */ - - firstPageOffset = - (unsigned long)region->virtAddr & (PAGE_SIZE - 1); - firstPageSize = PAGE_SIZE - firstPageOffset; - - region->numLockedPages = (firstPageOffset - + region->numBytes + - PAGE_SIZE - 1) / PAGE_SIZE; - pages = - kmalloc(region->numLockedPages * - sizeof(struct page *), GFP_KERNEL); - - if (pages == NULL) { - region->numLockedPages = 0; - return -ENOMEM; - } - - userTask = memMap->userTask; - - down_read(&userTask->mm->mmap_sem); - rc = get_user_pages(userTask, /* task */ - userTask->mm, /* mm */ - (unsigned long)region->virtAddr, /* start */ - region->numLockedPages, /* len */ - memMap->dir == DMA_FROM_DEVICE, /* write */ - 0, /* force */ - pages, /* pages (array of pointers to page) */ - NULL); /* vmas */ - up_read(&userTask->mm->mmap_sem); - - if (rc != region->numLockedPages) { - kfree(pages); - region->numLockedPages = 0; - - if (rc >= 0) { - rc = -EINVAL; - } - } else { - uint8_t *virtAddr = region->virtAddr; - size_t bytesRemaining; - int pageIdx; - - rc = 0; /* Since get_user_pages returns +ve number */ - - region->lockedPages = pages; - - /* We've locked the user pages. Now we need to walk them and figure */ - /* out the physical addresses. */ - - /* The first page may be partial */ - - dma_map_add_segment(memMap, - region, - virtAddr, - PFN_PHYS(page_to_pfn - (pages[0])) + - firstPageOffset, - firstPageSize); - - virtAddr += firstPageSize; - bytesRemaining = - region->numBytes - firstPageSize; - - for (pageIdx = 1; - pageIdx < region->numLockedPages; - pageIdx++) { - size_t bytesThisPage = - (bytesRemaining > - PAGE_SIZE ? PAGE_SIZE : - bytesRemaining); - - DMA_MAP_PRINT - ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n", - pageIdx, pages[pageIdx], - page_to_pfn(pages[pageIdx]), - PFN_PHYS(page_to_pfn - (pages[pageIdx]))); - - dma_map_add_segment(memMap, - region, - virtAddr, - PFN_PHYS(page_to_pfn - (pages - [pageIdx])), - bytesThisPage); - - virtAddr += bytesThisPage; - bytesRemaining -= bytesThisPage; - } - } -#else - printk(KERN_ERR - "%s: User mode pages are not yet supported\n", - __func__); - - /* user pages are not physically contiguous */ - - rc = -EINVAL; -#endif - break; - } - - default: - { - printk(KERN_ERR "%s: Unsupported memory type: %d\n", - __func__, region->memType); - - rc = -EINVAL; - break; - } - } - - if (rc != 0) { - memMap->numRegionsUsed--; - } - -out: - - DMA_MAP_PRINT("returning %d\n", rc); - - up(&memMap->lock); - - return rc; -} - -EXPORT_SYMBOL(dma_map_add_segment); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *mem, /* Virtual address that we want to get a map of */ - size_t numBytes, /* Number of bytes being mapped */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ) { - int rc; - - rc = dma_map_start(memMap, dir); - if (rc == 0) { - rc = dma_map_add_region(memMap, mem, numBytes); - if (rc < 0) { - /* Since the add fails, this function will fail, and the caller won't */ - /* call unmap, so we need to do it here. */ - - dma_unmap(memMap, 0); - } - } - - return rc; -} - -EXPORT_SYMBOL(dma_map_mem); - -/****************************************************************************/ -/** -* Setup a descriptor ring for a given memory map. -* -* It is assumed that the descriptor ring has already been initialized, and -* this routine will only reallocate a new descriptor ring if the existing -* one is too small. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */ - DMA_MemMap_t *memMap, /* Memory map that will be used */ - dma_addr_t devPhysAddr /* Physical address of device */ - ) { - int rc; - int numDescriptors; - DMA_DeviceAttribute_t *devAttr; - DMA_Region_t *region; - DMA_Segment_t *segment; - dma_addr_t srcPhysAddr; - dma_addr_t dstPhysAddr; - int regionIdx; - int segmentIdx; - - devAttr = &DMA_gDeviceAttribute[dev]; - - down(&memMap->lock); - - /* Figure out how many descriptors we need */ - - numDescriptors = 0; - for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - - for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - - if (memMap->dir == DMA_TO_DEVICE) { - srcPhysAddr = segment->physAddr; - dstPhysAddr = devPhysAddr; - } else { - srcPhysAddr = devPhysAddr; - dstPhysAddr = segment->physAddr; - } - - rc = - dma_calculate_descriptor_count(dev, srcPhysAddr, - dstPhysAddr, - segment-> - numBytes); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_calculate_descriptor_count failed: %d\n", - __func__, rc); - goto out; - } - numDescriptors += rc; - } - } - - /* Adjust the size of the ring, if it isn't big enough */ - - if (numDescriptors > devAttr->ring.descriptorsAllocated) { - dma_free_descriptor_ring(&devAttr->ring); - rc = - dma_alloc_descriptor_ring(&devAttr->ring, - numDescriptors); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_alloc_descriptor_ring failed: %d\n", - __func__, rc); - goto out; - } - } else { - rc = - dma_init_descriptor_ring(&devAttr->ring, - numDescriptors); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_init_descriptor_ring failed: %d\n", - __func__, rc); - goto out; - } - } - - /* Populate the descriptors */ - - for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - - for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - - if (memMap->dir == DMA_TO_DEVICE) { - srcPhysAddr = segment->physAddr; - dstPhysAddr = devPhysAddr; - } else { - srcPhysAddr = devPhysAddr; - dstPhysAddr = segment->physAddr; - } - - rc = - dma_add_descriptors(&devAttr->ring, dev, - srcPhysAddr, dstPhysAddr, - segment->numBytes); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_add_descriptors failed: %d\n", - __func__, rc); - goto out; - } - } - } - - rc = 0; - -out: - - up(&memMap->lock); - return rc; -} - -EXPORT_SYMBOL(dma_map_create_descriptor_ring); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ - int dirtied /* non-zero if any of the pages were modified */ - ) { - - int rc = 0; - int regionIdx; - int segmentIdx; - DMA_Region_t *region; - DMA_Segment_t *segment; - - down(&memMap->lock); - - for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { - region = &memMap->region[regionIdx]; - - for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed; - segmentIdx++) { - segment = ®ion->segment[segmentIdx]; - - switch (region->memType) { - case DMA_MEM_TYPE_VMALLOC: - { - printk(KERN_ERR - "%s: vmalloc'd pages are not yet supported\n", - __func__); - rc = -EINVAL; - goto out; - } - - case DMA_MEM_TYPE_KMALLOC: - { -#if ALLOW_MAP_OF_KMALLOC_MEMORY - dma_unmap_single(NULL, - segment->physAddr, - segment->numBytes, - memMap->dir); -#endif - break; - } - - case DMA_MEM_TYPE_DMA: - { - dma_sync_single_for_cpu(NULL, - segment-> - physAddr, - segment-> - numBytes, - memMap->dir); - break; - } - - case DMA_MEM_TYPE_USER: - { - /* Nothing to do here. */ - - break; - } - - default: - { - printk(KERN_ERR - "%s: Unsupported memory type: %d\n", - __func__, region->memType); - rc = -EINVAL; - goto out; - } - } - - segment->virtAddr = NULL; - segment->physAddr = 0; - segment->numBytes = 0; - } - - if (region->numLockedPages > 0) { - int pageIdx; - - /* Some user pages were locked. We need to go and unlock them now. */ - - for (pageIdx = 0; pageIdx < region->numLockedPages; - pageIdx++) { - struct page *page = - region->lockedPages[pageIdx]; - - if (memMap->dir == DMA_FROM_DEVICE) { - SetPageDirty(page); - } - page_cache_release(page); - } - kfree(region->lockedPages); - region->numLockedPages = 0; - region->lockedPages = NULL; - } - - region->memType = DMA_MEM_TYPE_NONE; - region->virtAddr = NULL; - region->numBytes = 0; - region->numSegmentsUsed = 0; - } - memMap->userTask = NULL; - memMap->numRegionsUsed = 0; - memMap->inUse = 0; - -out: - up(&memMap->lock); - - return rc; -} - -EXPORT_SYMBOL(dma_unmap); diff --git a/trunk/arch/arm/mach-bcmring/include/mach/dma.h b/trunk/arch/arm/mach-bcmring/include/mach/dma.h index 1f2c5319c056..72543781207b 100644 --- a/trunk/arch/arm/mach-bcmring/include/mach/dma.h +++ b/trunk/arch/arm/mach-bcmring/include/mach/dma.h @@ -26,15 +26,9 @@ /* ---- Include Files ---------------------------------------------------- */ #include -#include #include #include #include -#include -#include -#include -#include -#include /* ---- Constants and Types ---------------------------------------------- */ @@ -111,78 +105,6 @@ typedef struct { } DMA_DescriptorRing_t; -/**************************************************************************** -* -* The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup -* DMA chains from a variety of memory sources. -* -*****************************************************************************/ - -#define DMA_MEM_MAP_MIN_SIZE 4096 /* Pages less than this size are better */ - /* off not being DMA'd. */ - -typedef enum { - DMA_MEM_TYPE_NONE, /* Not a valid setting */ - DMA_MEM_TYPE_VMALLOC, /* Memory came from vmalloc call */ - DMA_MEM_TYPE_KMALLOC, /* Memory came from kmalloc call */ - DMA_MEM_TYPE_DMA, /* Memory came from dma_alloc_xxx call */ - DMA_MEM_TYPE_USER, /* Memory came from user space. */ - -} DMA_MemType_t; - -/* A segment represents a physically and virtually contiguous chunk of memory. */ -/* i.e. each segment can be DMA'd */ -/* A user of the DMA code will add memory regions. Each region may need to be */ -/* represented by one or more segments. */ - -typedef struct { - void *virtAddr; /* Virtual address used for this segment */ - dma_addr_t physAddr; /* Physical address this segment maps to */ - size_t numBytes; /* Size of the segment, in bytes */ - -} DMA_Segment_t; - -/* A region represents a virtually contiguous chunk of memory, which may be */ -/* made up of multiple segments. */ - -typedef struct { - DMA_MemType_t memType; - void *virtAddr; - size_t numBytes; - - /* Each region (virtually contiguous) consists of one or more segments. Each */ - /* segment is virtually and physically contiguous. */ - - int numSegmentsUsed; - int numSegmentsAllocated; - DMA_Segment_t *segment; - - /* When a region corresponds to user memory, we need to lock all of the pages */ - /* down before we can figure out the physical addresses. The lockedPage array contains */ - /* the pages that were locked, and which subsequently need to be unlocked once the */ - /* memory is unmapped. */ - - unsigned numLockedPages; - struct page **lockedPages; - -} DMA_Region_t; - -typedef struct { - int inUse; /* Is this mapping currently being used? */ - struct semaphore lock; /* Acquired when using this structure */ - enum dma_data_direction dir; /* Direction this transfer is intended for */ - - /* In the event that we're mapping user memory, we need to know which task */ - /* the memory is for, so that we can obtain the correct mm locks. */ - - struct task_struct *userTask; - - int numRegionsUsed; - int numRegionsAllocated; - DMA_Region_t *region; - -} DMA_MemMap_t; - /**************************************************************************** * * The DMA_DeviceAttribute_t contains information which describes a @@ -568,124 +490,6 @@ int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */ size_t numBytes /* Number of bytes in each destination buffer */ ); -/****************************************************************************/ -/** -* Initializes a DMA_MemMap_t data structure -*/ -/****************************************************************************/ - -int dma_init_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */ - ); - -/****************************************************************************/ -/** -* Releases any memory currently being held by a memory mapping structure. -*/ -/****************************************************************************/ - -int dma_term_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */ - ); - -/****************************************************************************/ -/** -* Looks at a memory address and categorizes it. -* -* @return One of the values from the DMA_MemType_t enumeration. -*/ -/****************************************************************************/ - -DMA_MemType_t dma_mem_type(void *addr); - -/****************************************************************************/ -/** -* Sets the process (aka userTask) associated with a mem map. This is -* required if user-mode segments will be added to the mapping. -*/ -/****************************************************************************/ - -static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap, - struct task_struct *task) -{ - memMap->userTask = task; -} - -/****************************************************************************/ -/** -* Looks at a memory address and determines if we support DMA'ing to/from -* that type of memory. -* -* @return boolean - -* return value != 0 means dma supported -* return value == 0 means dma not supported -*/ -/****************************************************************************/ - -int dma_mem_supports_dma(void *addr); - -/****************************************************************************/ -/** -* Initializes a memory map for use. Since this function acquires a -* sempaphore within the memory map, it is VERY important that dma_unmap -* be called when you're finished using the map. -*/ -/****************************************************************************/ - -int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ); - -/****************************************************************************/ -/** -* Adds a segment of memory to a memory map. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *mem, /* Virtual address that we want to get a map of */ - size_t numBytes /* Number of bytes being mapped */ - ); - -/****************************************************************************/ -/** -* Creates a descriptor ring from a memory mapping. -* -* @return 0 on success, error code otherwise. -*/ -/****************************************************************************/ - -int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */ - DMA_MemMap_t *memMap, /* Memory map that will be used */ - dma_addr_t devPhysAddr /* Physical address of device */ - ); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */ - void *addr, /* Virtual address that we want to get a map of */ - size_t count, /* Number of bytes being mapped */ - enum dma_data_direction dir /* Direction that the mapping will be going */ - ); - -/****************************************************************************/ -/** -* Maps in a memory region such that it can be used for performing a DMA. -* -* @return -*/ -/****************************************************************************/ - -int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ - int dirtied /* non-zero if any of the pages were modified */ - ); - /****************************************************************************/ /** * Initiates a transfer when the descriptors have already been setup. diff --git a/trunk/arch/arm/mach-davinci/board-da850-evm.c b/trunk/arch/arm/mach-davinci/board-da850-evm.c index 6b22b543a83f..d5088900af6c 100644 --- a/trunk/arch/arm/mach-davinci/board-da850-evm.c +++ b/trunk/arch/arm/mach-davinci/board-da850-evm.c @@ -44,7 +44,7 @@ #include #include -#define DA850_EVM_PHY_ID "0:00" +#define DA850_EVM_PHY_ID "davinci_mdio-0:00" #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) diff --git a/trunk/arch/arm/mach-davinci/board-dm365-evm.c b/trunk/arch/arm/mach-davinci/board-dm365-evm.c index 346e1de2f5a8..849311d3cb7c 100644 --- a/trunk/arch/arm/mach-davinci/board-dm365-evm.c +++ b/trunk/arch/arm/mach-davinci/board-dm365-evm.c @@ -54,7 +54,7 @@ static inline int have_tvp7002(void) return 0; } -#define DM365_EVM_PHY_ID "0:01" +#define DM365_EVM_PHY_ID "davinci_mdio-0:01" /* * A MAX-II CPLD is used for various board control functions. */ diff --git a/trunk/arch/arm/mach-davinci/board-dm644x-evm.c b/trunk/arch/arm/mach-davinci/board-dm644x-evm.c index a64b49cfedca..1247ecdcf752 100644 --- a/trunk/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/trunk/arch/arm/mach-davinci/board-dm644x-evm.c @@ -40,7 +40,7 @@ #include #include -#define DM644X_EVM_PHY_ID "0:01" +#define DM644X_EVM_PHY_ID "davinci_mdio-0:01" #define LXT971_PHY_ID (0x001378e2) #define LXT971_PHY_MASK (0xfffffff0) diff --git a/trunk/arch/arm/mach-davinci/board-dm646x-evm.c b/trunk/arch/arm/mach-davinci/board-dm646x-evm.c index 64017558860b..872ac69fa049 100644 --- a/trunk/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/trunk/arch/arm/mach-davinci/board-dm646x-evm.c @@ -736,7 +736,7 @@ static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; -#define DM646X_EVM_PHY_ID "0:01" +#define DM646X_EVM_PHY_ID "davinci_mdio-0:01" /* * The following EDMA channels/slots are not being used by drivers (for * example: Timer, GPIO, UART events etc) on dm646x, hence they are being diff --git a/trunk/arch/arm/mach-davinci/board-neuros-osd2.c b/trunk/arch/arm/mach-davinci/board-neuros-osd2.c index 6c4a16415d47..8d34f513d415 100644 --- a/trunk/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/trunk/arch/arm/mach-davinci/board-neuros-osd2.c @@ -39,7 +39,7 @@ #include #include -#define NEUROS_OSD2_PHY_ID "0:01" +#define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01" #define LXT971_PHY_ID 0x001378e2 #define LXT971_PHY_MASK 0xfffffff0 diff --git a/trunk/arch/arm/mach-davinci/board-omapl138-hawk.c b/trunk/arch/arm/mach-davinci/board-omapl138-hawk.c index e7c0c7c53493..45e815760a27 100644 --- a/trunk/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/trunk/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -21,7 +21,7 @@ #include #include -#define HAWKBOARD_PHY_ID "0:07" +#define HAWKBOARD_PHY_ID "davinci_mdio-0:07" #define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12) #define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13) diff --git a/trunk/arch/arm/mach-davinci/board-sffsdr.c b/trunk/arch/arm/mach-davinci/board-sffsdr.c index 0b136a831c59..31da3c5b2ba3 100644 --- a/trunk/arch/arm/mach-davinci/board-sffsdr.c +++ b/trunk/arch/arm/mach-davinci/board-sffsdr.c @@ -42,7 +42,7 @@ #include #include -#define SFFSDR_PHY_ID "0:01" +#define SFFSDR_PHY_ID "davinci_mdio-0:01" static struct mtd_partition davinci_sffsdr_nandflash_partition[] = { /* U-Boot Environment: Block 0 * UBL: Block 1 diff --git a/trunk/arch/arm/mach-davinci/da850.c b/trunk/arch/arm/mach-davinci/da850.c index 0ed7fdb64efb..992c4c410185 100644 --- a/trunk/arch/arm/mach-davinci/da850.c +++ b/trunk/arch/arm/mach-davinci/da850.c @@ -153,34 +153,6 @@ static struct clk pll1_sysclk3 = { .div_reg = PLLDIV3, }; -static struct clk pll1_sysclk4 = { - .name = "pll1_sysclk4", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll1_sysclk5 = { - .name = "pll1_sysclk5", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll1_sysclk6 = { - .name = "pll0_sysclk6", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll1_sysclk7 = { - .name = "pll1_sysclk7", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV7, -}; - static struct clk i2c0_clk = { .name = "i2c0", .parent = &pll0_aux_clk, @@ -397,10 +369,6 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "pll1_aux", &pll1_aux_clk), CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), - CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), - CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), - CLK(NULL, "pll1_sysclk6", &pll1_sysclk6), - CLK(NULL, "pll1_sysclk7", &pll1_sysclk7), CLK("i2c_davinci.1", NULL, &i2c0_clk), CLK(NULL, "timer0", &timerp64_0_clk), CLK("watchdog", NULL, &timerp64_1_clk), diff --git a/trunk/arch/arm/mach-dove/common.c b/trunk/arch/arm/mach-dove/common.c index dd1429ae6405..bda7aca04ca0 100644 --- a/trunk/arch/arm/mach-dove/common.c +++ b/trunk/arch/arm/mach-dove/common.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include "common.h" @@ -71,7 +72,7 @@ void __init dove_map_io(void) ****************************************************************************/ void __init dove_ehci0_init(void) { - orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0); + orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA); } /***************************************************************************** diff --git a/trunk/arch/arm/mach-ep93xx/vision_ep9307.c b/trunk/arch/arm/mach-ep93xx/vision_ep9307.c index 03dd4012043e..d67d0b4feb6f 100644 --- a/trunk/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/trunk/arch/arm/mach-ep93xx/vision_ep9307.c @@ -32,7 +32,9 @@ #include #include #include +#include +#include #include #include #include @@ -153,7 +155,6 @@ static struct i2c_board_info vision_i2c_info[] __initdata = { }, { I2C_BOARD_INFO("pca9539", 0x74), .platform_data = &pca953x_74_gpio_data, - .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)), }, { I2C_BOARD_INFO("pca9539", 0x75), .platform_data = &pca953x_75_gpio_data, @@ -348,6 +349,8 @@ static void __init vision_init_machine(void) "pca9539:74")) pr_warn("cannot request interrupt gpio for pca9539:74\n"); + vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)); + ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info, ARRAY_SIZE(vision_i2c_info)); ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, @@ -359,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") .atag_offset = 0x100, .map_io = vision_map_io, .init_irq = ep93xx_init_irq, + .handle_irq = vic_handle_irq, .timer = &ep93xx_timer, .init_machine = vision_init_machine, .restart = ep93xx_restart, diff --git a/trunk/arch/arm/mach-exynos/clock-exynos4210.c b/trunk/arch/arm/mach-exynos/clock-exynos4210.c index a5823a7f249e..13312ccb2d93 100644 --- a/trunk/arch/arm/mach-exynos/clock-exynos4210.c +++ b/trunk/arch/arm/mach-exynos/clock-exynos4210.c @@ -32,6 +32,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKSRC_LCD1), @@ -42,6 +43,7 @@ static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_IP_LCD1), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), }; +#endif static struct clksrc_clk *sysclks[] = { /* nothing here yet */ diff --git a/trunk/arch/arm/mach-exynos/clock-exynos4212.c b/trunk/arch/arm/mach-exynos/clock-exynos4212.c index 26a668b0d101..48af28566fa1 100644 --- a/trunk/arch/arm/mach-exynos/clock-exynos4212.c +++ b/trunk/arch/arm/mach-exynos/clock-exynos4212.c @@ -32,12 +32,14 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4212_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKDIV_IMAGE), SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), }; +#endif static struct clk *clk_src_mpll_user_list[] = { [0] = &clk_fin_mpll, diff --git a/trunk/arch/arm/mach-exynos/clock.c b/trunk/arch/arm/mach-exynos/clock.c index 5a8c42e90005..187287aa57ab 100644 --- a/trunk/arch/arm/mach-exynos/clock.c +++ b/trunk/arch/arm/mach-exynos/clock.c @@ -30,6 +30,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKDIV_LEFTBUS), SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), @@ -93,6 +94,7 @@ static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_SCLKCPU), SAVE_ITEM(S5P_CLKGATE_IP_CPU), }; +#endif struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", diff --git a/trunk/arch/arm/mach-exynos/mach-exynos4-dt.c b/trunk/arch/arm/mach-exynos/mach-exynos4-dt.c index 85fa02767d67..e6b02fdf1b09 100644 --- a/trunk/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/trunk/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -15,11 +15,13 @@ #include #include +#include #include #include #include -#include + +#include "common.h" /* * The following lookup table is used to override device names when devices @@ -60,7 +62,7 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { static void __init exynos4210_dt_map_io(void) { - s5p_init_io(NULL, 0, S5P_VA_CHIPID); + exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); } @@ -79,7 +81,9 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham */ .init_irq = exynos4_init_irq, .map_io = exynos4210_dt_map_io, + .handle_irq = gic_handle_irq, .init_machine = exynos4210_dt_machine_init, .timer = &exynos4_timer, .dt_compat = exynos4210_dt_compat, + .restart = exynos4_restart, MACHINE_END diff --git a/trunk/arch/arm/mach-exynos/mach-nuri.c b/trunk/arch/arm/mach-exynos/mach-nuri.c index b895ec031105..435261f83f46 100644 --- a/trunk/arch/arm/mach-exynos/mach-nuri.c +++ b/trunk/arch/arm/mach-exynos/mach-nuri.c @@ -220,14 +220,14 @@ static struct s3c_fb_pd_win nuri_fb_win0 = { .lower_margin = 1, .hsync_len = 48, .vsync_len = 3, - .xres = 1280, - .yres = 800, + .xres = 1024, + .yres = 600, .refresh = 60, }, .max_bpp = 24, .default_bpp = 16, - .virtual_x = 1280, - .virtual_y = 800, + .virtual_x = 1024, + .virtual_y = 2 * 600, }; static struct s3c_fb_platdata nuri_fb_pdata __initdata = { diff --git a/trunk/arch/arm/mach-exynos/mach-universal_c210.c b/trunk/arch/arm/mach-exynos/mach-universal_c210.c index 37ac93e8d6d9..38939956c34f 100644 --- a/trunk/arch/arm/mach-exynos/mach-universal_c210.c +++ b/trunk/arch/arm/mach-exynos/mach-universal_c210.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = { .threshold = 0x28, .voltage = 2800000, /* 2.8V */ .orient = MXT_DIAGONAL, + .irqflags = IRQF_TRIGGER_FALLING, }; static struct i2c_board_info i2c3_devs[] __initdata = { @@ -910,7 +912,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = { .bus_type = FIMC_MIPI_CSI2, .board_info = &m5mols_board_info, .i2c_bus_num = 0, - .clk_frequency = 21600000UL, + .clk_frequency = 24000000UL, .csi_data_align = 32, }, }; diff --git a/trunk/arch/arm/mach-exynos/pm.c b/trunk/arch/arm/mach-exynos/pm.c index a4f61a43c7ba..e19013051772 100644 --- a/trunk/arch/arm/mach-exynos/pm.c +++ b/trunk/arch/arm/mach-exynos/pm.c @@ -206,7 +206,7 @@ static void exynos4_pm_prepare(void) } -static int exynos4_pm_add(struct device *dev) +static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif) { pm_cpu_prep = exynos4_pm_prepare; pm_cpu_sleep = exynos4_cpu_suspend; @@ -384,7 +384,9 @@ static void exynos4_pm_resume(void) exynos4_restore_pll(); +#ifdef CONFIG_SMP scu_enable(S5P_VA_SCU); +#endif #ifdef CONFIG_CACHE_L2X0 s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); diff --git a/trunk/arch/arm/mach-kirkwood/common.c b/trunk/arch/arm/mach-kirkwood/common.c index cc15426787b1..77d4852e19f2 100644 --- a/trunk/arch/arm/mach-kirkwood/common.c +++ b/trunk/arch/arm/mach-kirkwood/common.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -73,7 +74,7 @@ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; void __init kirkwood_ehci_init(void) { kirkwood_clk_ctrl |= CGC_USB0; - orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB); + orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA); } diff --git a/trunk/arch/arm/mach-kirkwood/mpp.h b/trunk/arch/arm/mach-kirkwood/mpp.h index e8fda45c0736..d5a0d1da2e0e 100644 --- a/trunk/arch/arm/mach-kirkwood/mpp.h +++ b/trunk/arch/arm/mach-kirkwood/mpp.h @@ -31,314 +31,314 @@ #define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 ) #define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 ) #define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1, 0 ) +#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 ) #define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1, 0 ) +#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 ) #define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP8_TW0_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1, 1 ) -#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP9_TW0_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1, 0 ) +#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 ) #define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1, 0 ) -#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1, 0 ) -#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 ) +#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) #define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 ) -#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP12_TW1_SDA MPP( 12, 0xd, 1, 0, 0, 0, 0, 0, 1 ) +#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 ) #define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP13_LCDPWM MPP( 13, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP14_AU_SPDIFI MPP( 14, 0xa, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP14_AU_I2SDI MPP( 14, 0xb, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1, 1 ) -#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 1, 0, 0, 0, 0, 0, 1 ) -#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 ) #define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP17_TW1_SCK MPP( 17, 0xd, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 ) +#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 ) +#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 ) #define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 ) +#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 ) #define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 ) -#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1, 1 ) +#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 ) #define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP20_AU_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1, 1 ) -#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 ) #define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1, 1 ) -#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP27_AU_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP28_AU_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 ) #define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 ) #define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1, 1 ) +#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1, 1 ) -#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1, 1 ) +#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 ) +#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 ) -#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 ) #define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 ) -#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 ) #define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 ) -#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1, 1 ) +#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 ) #define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 ) -#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1, 1 ) +#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 ) #define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) -#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1, 1 ) +#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 ) #define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP36_AU_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1, 1 ) -#define MPP36_TW1_SDA MPP( 36, 0xb, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 ) +#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1, 1 ) -#define MPP37_TW1_SCK MPP( 37, 0xb, 1, 1, 0, 0, 0, 0, 1 ) +#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 ) +#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1, 1 ) -#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1, 1 ) +#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 ) #define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP43_AU_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1, 1 ) +#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 ) -#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 ) #define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 ) -#define MPP44_AU_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1, 1 ) +#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 ) #define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1, 1 ) +#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1, 1 ) +#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1, 1 ) -#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1, 1 ) +#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 ) #define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 ) #define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 ) -#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1, 0 ) -#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1, 1 ) -#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1, 0 ) -#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 1, 0, 0, 0, 0, 1 ) +#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 ) +#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 ) +#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 ) +#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 ) #define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 ) #define MPP_MAX 49 diff --git a/trunk/arch/arm/mach-lpc32xx/include/mach/irqs.h b/trunk/arch/arm/mach-lpc32xx/include/mach/irqs.h index 2667f52e3b04..9e3b90df32e1 100644 --- a/trunk/arch/arm/mach-lpc32xx/include/mach/irqs.h +++ b/trunk/arch/arm/mach-lpc32xx/include/mach/irqs.h @@ -61,7 +61,7 @@ */ #define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1) #define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2) -#define IRQ_LPC32XX_GPI_11 LPC32XX_SIC1_IRQ(4) +#define IRQ_LPC32XX_GPI_28 LPC32XX_SIC1_IRQ(4) #define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6) #define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7) #define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8) diff --git a/trunk/arch/arm/mach-lpc32xx/irq.c b/trunk/arch/arm/mach-lpc32xx/irq.c index 4eae566dfdc7..c74de01ab5b6 100644 --- a/trunk/arch/arm/mach-lpc32xx/irq.c +++ b/trunk/arch/arm/mach-lpc32xx/irq.c @@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = { .event_group = &lpc32xx_event_pin_regs, .mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT, }, + [IRQ_LPC32XX_GPI_28] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT, + }, [IRQ_LPC32XX_GPIO_00] = { .event_group = &lpc32xx_event_int_regs, .mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT, @@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state) if (state) eventreg |= lpc32xx_events[d->irq].mask; - else + else { eventreg &= ~lpc32xx_events[d->irq].mask; + /* + * When disabling the wakeup, clear the latched + * event + */ + __raw_writel(lpc32xx_events[d->irq].mask, + lpc32xx_events[d->irq]. + event_group->rawstat_reg); + } + __raw_writel(eventreg, lpc32xx_events[d->irq].event_group->enab_reg); @@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void) /* Setup SIC1 */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); - __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); - __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); + __raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); + __raw_writel(SIC1_ATR_DEFAULT, + LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); /* Setup SIC2 */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); - __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); - __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); + __raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); + __raw_writel(SIC2_ATR_DEFAULT, + LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); /* Configure supported IRQ's */ for (i = 0; i < NR_IRQS; i++) { diff --git a/trunk/arch/arm/mach-lpc32xx/serial.c b/trunk/arch/arm/mach-lpc32xx/serial.c index 429cfdbb2b3d..f2735281616a 100644 --- a/trunk/arch/arm/mach-lpc32xx/serial.c +++ b/trunk/arch/arm/mach-lpc32xx/serial.c @@ -88,6 +88,7 @@ struct uartinit { char *uart_ck_name; u32 ck_mode_mask; void __iomem *pdiv_clk_reg; + resource_size_t mapbase; }; static struct uartinit uartinit_data[] __initdata = { @@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5), .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL, + .mapbase = LPC32XX_UART5_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT @@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3), .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL, + .mapbase = LPC32XX_UART3_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT @@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4), .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL, + .mapbase = LPC32XX_UART4_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT @@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6), .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL, + .mapbase = LPC32XX_UART6_BASE, }, #endif }; @@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void) /* pre-UART clock divider set to 1 */ __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg); + + /* + * Force a flush of the RX FIFOs to work around a + * HW bug + */ + puart = uartinit_data[i].mapbase; + __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); + __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart)); + j = LPC32XX_SUART_FIFO_SIZE; + while (j--) + tmp = __raw_readl( + LPC32XX_UART_DLL_FIFO(puart)); + __raw_writel(0, LPC32XX_UART_IIR_FCR(puart)); } /* This needs to be done after all UART clocks are setup */ __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE); - for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) { + for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { /* Force a flush of the RX FIFOs to work around a HW bug */ puart = serial_std_platform_data[i].mapbase; __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); diff --git a/trunk/arch/arm/mach-mmp/aspenite.c b/trunk/arch/arm/mach-mmp/aspenite.c index 17cb76060125..3588a5584153 100644 --- a/trunk/arch/arm/mach-mmp/aspenite.c +++ b/trunk/arch/arm/mach-mmp/aspenite.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include diff --git a/trunk/arch/arm/mach-mmp/pxa168.c b/trunk/arch/arm/mach-mmp/pxa168.c index 7bc17eaa12eb..ada1213982b4 100644 --- a/trunk/arch/arm/mach-mmp/pxa168.c +++ b/trunk/arch/arm/mach-mmp/pxa168.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include diff --git a/trunk/arch/arm/mach-mmp/tavorevb.c b/trunk/arch/arm/mach-mmp/tavorevb.c index 8e3b5af04a57..bc97170125bf 100644 --- a/trunk/arch/arm/mach-mmp/tavorevb.c +++ b/trunk/arch/arm/mach-mmp/tavorevb.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include diff --git a/trunk/arch/arm/mach-mv78xx0/common.c b/trunk/arch/arm/mach-mv78xx0/common.c index 0cdd41004ad0..a5dcf766a3f9 100644 --- a/trunk/arch/arm/mach-mv78xx0/common.c +++ b/trunk/arch/arm/mach-mv78xx0/common.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -169,7 +170,7 @@ void __init mv78xx0_map_io(void) ****************************************************************************/ void __init mv78xx0_ehci0_init(void) { - orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0); + orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA); } diff --git a/trunk/arch/arm/mach-mv78xx0/mpp.h b/trunk/arch/arm/mach-mv78xx0/mpp.h index b61b50927123..3752302ae2ee 100644 --- a/trunk/arch/arm/mach-mv78xx0/mpp.h +++ b/trunk/arch/arm/mach-mv78xx0/mpp.h @@ -24,296 +24,296 @@ #define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1) #define MPP0_GPIO MPP(0, 0x0, 1, 1, 1) -#define MPP0_GE0_COL MPP(0, 0x1, 1, 0, 1) -#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 1, 1) +#define MPP0_GE0_COL MPP(0, 0x1, 0, 0, 1) +#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 0, 1) #define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1) #define MPP1_GPIO MPP(1, 0x0, 1, 1, 1) -#define MPP1_GE0_RXERR MPP(1, 0x1, 1, 0, 1) -#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 1, 1) +#define MPP1_GE0_RXERR MPP(1, 0x1, 0, 0, 1) +#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 0, 1) #define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1) #define MPP2_GPIO MPP(2, 0x0, 1, 1, 1) -#define MPP2_GE0_CRS MPP(2, 0x1, 1, 0, 1) -#define MPP2_GE1_RXCTL MPP(2, 0x2, 1, 0, 1) +#define MPP2_GE0_CRS MPP(2, 0x1, 0, 0, 1) +#define MPP2_GE1_RXCTL MPP(2, 0x2, 0, 0, 1) #define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1) #define MPP3_GPIO MPP(3, 0x0, 1, 1, 1) -#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 1, 1) -#define MPP3_GE1_RXCLK MPP(3, 0x2, 1, 0, 1) +#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 0, 1) +#define MPP3_GE1_RXCLK MPP(3, 0x2, 0, 0, 1) #define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1) #define MPP4_GPIO MPP(4, 0x0, 1, 1, 1) -#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 1, 1) -#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 1, 1) +#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 0, 1) +#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 0, 1) #define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1) #define MPP5_GPIO MPP(5, 0x0, 1, 1, 1) -#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 1, 1) -#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 1, 1) +#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 0, 1) +#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 0, 1) #define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1) #define MPP6_GPIO MPP(6, 0x0, 1, 1, 1) -#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 1, 1) -#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 1, 1) +#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 0, 1) +#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 0, 1) #define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1) #define MPP7_GPIO MPP(7, 0x0, 1, 1, 1) -#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 1, 1) -#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 1, 1) +#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 0, 1) +#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 0, 1) #define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1) #define MPP8_GPIO MPP(8, 0x0, 1, 1, 1) -#define MPP8_GE0_RXD4 MPP(8, 0x1, 1, 0, 1) -#define MPP8_GE1_RXD0 MPP(8, 0x2, 1, 0, 1) +#define MPP8_GE0_RXD4 MPP(8, 0x1, 0, 0, 1) +#define MPP8_GE1_RXD0 MPP(8, 0x2, 0, 0, 1) #define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1) #define MPP9_GPIO MPP(9, 0x0, 1, 1, 1) -#define MPP9_GE0_RXD5 MPP(9, 0x1, 1, 0, 1) -#define MPP9_GE1_RXD1 MPP(9, 0x2, 1, 0, 1) +#define MPP9_GE0_RXD5 MPP(9, 0x1, 0, 0, 1) +#define MPP9_GE1_RXD1 MPP(9, 0x2, 0, 0, 1) #define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1) #define MPP10_GPIO MPP(10, 0x0, 1, 1, 1) -#define MPP10_GE0_RXD6 MPP(10, 0x1, 1, 0, 1) -#define MPP10_GE1_RXD2 MPP(10, 0x2, 1, 0, 1) +#define MPP10_GE0_RXD6 MPP(10, 0x1, 0, 0, 1) +#define MPP10_GE1_RXD2 MPP(10, 0x2, 0, 0, 1) #define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1) #define MPP11_GPIO MPP(11, 0x0, 1, 1, 1) -#define MPP11_GE0_RXD7 MPP(11, 0x1, 1, 0, 1) -#define MPP11_GE1_RXD3 MPP(11, 0x2, 1, 0, 1) +#define MPP11_GE0_RXD7 MPP(11, 0x1, 0, 0, 1) +#define MPP11_GE1_RXD3 MPP(11, 0x2, 0, 0, 1) #define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1) #define MPP12_GPIO MPP(12, 0x0, 1, 1, 1) -#define MPP12_M_BB MPP(12, 0x3, 1, 0, 1) -#define MPP12_UA0_CTSn MPP(12, 0x4, 1, 0, 1) -#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 1, 1) -#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 1, 1) +#define MPP12_M_BB MPP(12, 0x3, 0, 0, 1) +#define MPP12_UA0_CTSn MPP(12, 0x4, 0, 0, 1) +#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 0, 1) +#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 0, 1) #define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1) #define MPP13_GPIO MPP(13, 0x0, 1, 1, 1) -#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 1, 1) -#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 1, 1) -#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 1, 1) -#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 1, 1) +#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 0, 1) +#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 0, 1) +#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 0, 1) +#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 0, 1) #define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1) #define MPP14_GPIO MPP(14, 0x0, 1, 1, 1) -#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 1, 1) -#define MPP14_UA1_CTSn MPP(14, 0x4, 1, 0, 1) -#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 1, 1) -#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 1, 1) +#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 0, 1) +#define MPP14_UA1_CTSn MPP(14, 0x4, 0, 0, 1) +#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 0, 1) +#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 0, 1) #define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1) #define MPP15_GPIO MPP(15, 0x0, 1, 1, 1) -#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 1, 1) -#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 1, 1) -#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 1, 1) -#define MPP15_TDM_SMISO MPP(15, 0x6, 1, 0, 1) +#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 0, 1) +#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 0, 1) +#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 0, 1) +#define MPP15_TDM_SMISO MPP(15, 0x6, 0, 0, 1) #define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1) #define MPP16_GPIO MPP(16, 0x0, 1, 1, 1) -#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 1, 1) -#define MPP16_UA2_TXD MPP(16, 0x4, 0, 1, 1) -#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 1, 1) -#define MPP16_TDM_INTn MPP(16, 0x6, 1, 0, 1) +#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 0, 1) +#define MPP16_UA2_TXD MPP(16, 0x4, 0, 0, 1) +#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 0, 1) +#define MPP16_TDM_INTn MPP(16, 0x6, 0, 0, 1) #define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1) #define MPP17_GPIO MPP(17, 0x0, 1, 1, 1) -#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 1, 1) -#define MPP17_UA2_RXD MPP(17, 0x4, 1, 0, 1) -#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 1, 1) -#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 1, 1) +#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 0, 1) +#define MPP17_UA2_RXD MPP(17, 0x4, 0, 0, 1) +#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 0, 1) +#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 0, 1) #define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1) #define MPP18_GPIO MPP(18, 0x0, 1, 1, 1) -#define MPP18_UA0_CTSn MPP(18, 0x4, 1, 0, 1) -#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 1, 1) +#define MPP18_UA0_CTSn MPP(18, 0x4, 0, 0, 1) +#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 0, 1) #define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1) #define MPP19_GPIO MPP(19, 0x0, 1, 1, 1) -#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 1, 1) -#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 1, 1) +#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 0, 1) +#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 0, 1) #define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1) #define MPP20_GPIO MPP(20, 0x0, 1, 1, 1) -#define MPP20_UA1_CTSs MPP(20, 0x4, 1, 0, 1) -#define MPP20_TDM_PCLK MPP(20, 0x6, 1, 1, 0) +#define MPP20_UA1_CTSs MPP(20, 0x4, 0, 0, 1) +#define MPP20_TDM_PCLK MPP(20, 0x6, 0, 0, 0) #define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1) #define MPP21_GPIO MPP(21, 0x0, 1, 1, 1) -#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 1, 1) -#define MPP21_TDM_FSYNC MPP(21, 0x6, 1, 1, 0) +#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 0, 1) +#define MPP21_TDM_FSYNC MPP(21, 0x6, 0, 0, 0) #define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1) #define MPP22_GPIO MPP(22, 0x0, 1, 1, 1) -#define MPP22_UA3_TDX MPP(22, 0x4, 0, 1, 1) -#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 1, 1) -#define MPP22_TDM_DRX MPP(22, 0x6, 1, 0, 1) +#define MPP22_UA3_TDX MPP(22, 0x4, 0, 0, 1) +#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 0, 1) +#define MPP22_TDM_DRX MPP(22, 0x6, 0, 0, 1) #define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1) #define MPP23_GPIO MPP(23, 0x0, 1, 1, 1) -#define MPP23_UA3_RDX MPP(23, 0x4, 1, 0, 1) -#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 1, 1) -#define MPP23_TDM_DTX MPP(23, 0x6, 0, 1, 1) +#define MPP23_UA3_RDX MPP(23, 0x4, 0, 0, 1) +#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 0, 1) +#define MPP23_TDM_DTX MPP(23, 0x6, 0, 0, 1) #define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1) #define MPP24_GPIO MPP(24, 0x0, 1, 1, 1) -#define MPP24_UA2_TXD MPP(24, 0x4, 0, 1, 1) -#define MPP24_TDM_INTn MPP(24, 0x6, 1, 0, 1) +#define MPP24_UA2_TXD MPP(24, 0x4, 0, 0, 1) +#define MPP24_TDM_INTn MPP(24, 0x6, 0, 0, 1) #define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1) #define MPP25_GPIO MPP(25, 0x0, 1, 1, 1) -#define MPP25_UA2_RXD MPP(25, 0x4, 1, 0, 1) -#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 1, 1) +#define MPP25_UA2_RXD MPP(25, 0x4, 0, 0, 1) +#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 0, 1) #define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1) #define MPP26_GPIO MPP(26, 0x0, 1, 1, 1) -#define MPP26_UA2_CTSn MPP(26, 0x4, 1, 0, 1) -#define MPP26_TDM_PCLK MPP(26, 0x6, 1, 1, 1) +#define MPP26_UA2_CTSn MPP(26, 0x4, 0, 0, 1) +#define MPP26_TDM_PCLK MPP(26, 0x6, 0, 0, 1) #define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1) #define MPP27_GPIO MPP(27, 0x0, 1, 1, 1) -#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 1, 1) -#define MPP27_TDM_FSYNC MPP(27, 0x6, 1, 1, 1) +#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 0, 1) +#define MPP27_TDM_FSYNC MPP(27, 0x6, 0, 0, 1) #define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1) #define MPP28_GPIO MPP(28, 0x0, 1, 1, 1) -#define MPP28_UA3_TXD MPP(28, 0x4, 0, 1, 1) -#define MPP28_TDM_DRX MPP(28, 0x6, 1, 0, 1) +#define MPP28_UA3_TXD MPP(28, 0x4, 0, 0, 1) +#define MPP28_TDM_DRX MPP(28, 0x6, 0, 0, 1) #define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1) #define MPP29_GPIO MPP(29, 0x0, 1, 1, 1) -#define MPP29_UA3_RXD MPP(29, 0x4, 1, 0, 1) -#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 1, 1) -#define MPP29_TDM_DTX MPP(29, 0x6, 0, 1, 1) +#define MPP29_UA3_RXD MPP(29, 0x4, 0, 0, 1) +#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 0, 1) +#define MPP29_TDM_DTX MPP(29, 0x6, 0, 0, 1) #define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1) #define MPP30_GPIO MPP(30, 0x0, 1, 1, 1) -#define MPP30_UA3_CTSn MPP(30, 0x4, 1, 0, 1) +#define MPP30_UA3_CTSn MPP(30, 0x4, 0, 0, 1) #define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1) #define MPP31_GPIO MPP(31, 0x0, 1, 1, 1) -#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 1, 1) -#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 1, 1) +#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 0, 1) +#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 0, 1) #define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1) #define MPP32_GPIO MPP(32, 0x1, 1, 1, 1) -#define MPP32_UA3_TDX MPP(32, 0x4, 0, 1, 1) -#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 1, 1) -#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 1, 1) +#define MPP32_UA3_TDX MPP(32, 0x4, 0, 0, 1) +#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 0, 1) +#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 0, 1) #define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1) #define MPP33_GPIO MPP(33, 0x1, 1, 1, 1) -#define MPP33_UA3_RDX MPP(33, 0x4, 1, 0, 1) -#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 1, 1) +#define MPP33_UA3_RDX MPP(33, 0x4, 0, 0, 1) +#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 0, 1) #define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1) #define MPP34_GPIO MPP(34, 0x1, 1, 1, 1) -#define MPP34_UA2_TDX MPP(34, 0x4, 0, 1, 1) -#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 1, 1) +#define MPP34_UA2_TDX MPP(34, 0x4, 0, 0, 1) +#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 0, 1) #define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1) #define MPP35_GPIO MPP(35, 0x1, 1, 1, 1) -#define MPP35_UA2_RDX MPP(35, 0x4, 1, 0, 1) -#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 1, 1) +#define MPP35_UA2_RDX MPP(35, 0x4, 0, 0, 1) +#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 0, 1) #define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1) #define MPP36_GPIO MPP(36, 0x1, 1, 1, 1) -#define MPP36_UA0_CTSn MPP(36, 0x2, 1, 0, 1) -#define MPP36_UA2_TDX MPP(36, 0x4, 0, 1, 1) -#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 1, 1) +#define MPP36_UA0_CTSn MPP(36, 0x2, 0, 0, 1) +#define MPP36_UA2_TDX MPP(36, 0x4, 0, 0, 1) +#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 0, 1) #define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1) #define MPP37_GPIO MPP(37, 0x1, 1, 1, 1) -#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 1, 1) -#define MPP37_UA2_RXD MPP(37, 0x4, 1, 0, 1) -#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 1, 1) -#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 1, 1) +#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 0, 1) +#define MPP37_UA2_RXD MPP(37, 0x4, 0, 0, 1) +#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 0, 1) +#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 0, 1) #define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1) #define MPP38_GPIO MPP(38, 0x1, 1, 1, 1) -#define MPP38_UA1_CTSn MPP(38, 0x2, 1, 0, 1) -#define MPP38_UA3_TXD MPP(38, 0x4, 0, 1, 1) -#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 1, 1) -#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 1, 1) +#define MPP38_UA1_CTSn MPP(38, 0x2, 0, 0, 1) +#define MPP38_UA3_TXD MPP(38, 0x4, 0, 0, 1) +#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 0, 1) +#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 0, 1) #define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1) #define MPP39_GPIO MPP(39, 0x1, 1, 1, 1) -#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 1, 1) -#define MPP39_UA3_RXD MPP(39, 0x4, 1, 0, 1) -#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 1, 1) -#define MPP39_TDM_SMISO MPP(39, 0x6, 1, 0, 1) +#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 0, 1) +#define MPP39_UA3_RXD MPP(39, 0x4, 0, 0, 1) +#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 0, 1) +#define MPP39_TDM_SMISO MPP(39, 0x6, 0, 0, 1) #define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1) #define MPP40_GPIO MPP(40, 0x1, 1, 1, 1) -#define MPP40_TDM_INTn MPP(40, 0x6, 1, 0, 1) +#define MPP40_TDM_INTn MPP(40, 0x6, 0, 0, 1) #define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1) #define MPP41_GPIO MPP(41, 0x1, 1, 1, 1) -#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 1, 1) +#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 0, 1) #define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1) #define MPP42_GPIO MPP(42, 0x1, 1, 1, 1) -#define MPP42_TDM_PCLK MPP(42, 0x6, 1, 1, 1) +#define MPP42_TDM_PCLK MPP(42, 0x6, 0, 0, 1) #define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1) #define MPP43_GPIO MPP(43, 0x1, 1, 1, 1) -#define MPP43_TDM_FSYNC MPP(43, 0x6, 1, 1, 1) +#define MPP43_TDM_FSYNC MPP(43, 0x6, 0, 0, 1) #define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1) #define MPP44_GPIO MPP(44, 0x1, 1, 1, 1) -#define MPP44_TDM_DRX MPP(44, 0x6, 1, 0, 1) +#define MPP44_TDM_DRX MPP(44, 0x6, 0, 0, 1) #define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1) #define MPP45_GPIO MPP(45, 0x1, 1, 1, 1) -#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 1, 1) -#define MPP45_TDM_DRX MPP(45, 0x6, 0, 1, 1) +#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 0, 1) +#define MPP45_TDM_DRX MPP(45, 0x6, 0, 0, 1) #define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1) #define MPP46_GPIO MPP(46, 0x1, 1, 1, 1) -#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 1, 1) +#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 0, 1) #define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1) @@ -323,14 +323,14 @@ #define MPP48_GPIO MPP(48, 0x1, 1, 1, 1) -#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 1, 1) +#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 0, 1) #define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1) #define MPP49_GPIO MPP(49, 0x1, 1, 1, 1) -#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 1, 1) -#define MPP49_M_BB MPP(49, 0x4, 1, 0, 1) +#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 0, 1) +#define MPP49_M_BB MPP(49, 0x4, 0, 0, 1) #define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1) diff --git a/trunk/arch/arm/mach-omap1/board-innovator.c b/trunk/arch/arm/mach-omap1/board-innovator.c index 309369ea6978..be2002f42dea 100644 --- a/trunk/arch/arm/mach-omap1/board-innovator.c +++ b/trunk/arch/arm/mach-omap1/board-innovator.c @@ -416,13 +416,13 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { omap1_usb_init(&innovator1510_usb_config); - innovator_config[1].data = &innovator1510_lcd_config; + innovator_config[0].data = &innovator1510_lcd_config; } #endif #ifdef CONFIG_ARCH_OMAP16XX if (cpu_is_omap1610()) { omap1_usb_init(&h2_usb_config); - innovator_config[1].data = &innovator1610_lcd_config; + innovator_config[0].data = &innovator1610_lcd_config; } #endif omap_board_config = innovator_config; diff --git a/trunk/arch/arm/mach-omap2/Kconfig b/trunk/arch/arm/mach-omap2/Kconfig index 41e6612ecbaf..e20c8ab80b0e 100644 --- a/trunk/arch/arm/mach-omap2/Kconfig +++ b/trunk/arch/arm/mach-omap2/Kconfig @@ -213,13 +213,12 @@ config MACH_OMAP3_PANDORA depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP3_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 default y - select BACKLIGHT_CLASS_DEVICE config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" @@ -265,7 +264,7 @@ config MACH_OMAP_ZOOM2 select SERIAL_8250 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -275,7 +274,7 @@ config MACH_OMAP_ZOOM3 select SERIAL_8250 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" @@ -334,7 +333,7 @@ config MACH_OMAP_4430SDP depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP4_PANDA bool "OMAP4 Panda Board" @@ -342,7 +341,7 @@ config MACH_OMAP4_PANDA depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config OMAP3_EMU bool "OMAP3 debugging peripherals" @@ -365,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING going on could result in system crashes; config OMAP4_ERRATA_I688 - bool "OMAP4 errata: Async Bridge Corruption (BROKEN)" - depends on ARCH_OMAP4 && BROKEN + bool "OMAP4 errata: Async Bridge Corruption" + depends on ARCH_OMAP4 select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/trunk/arch/arm/mach-omap2/Makefile b/trunk/arch/arm/mach-omap2/Makefile index fc9b238cbc19..bd76394ccaf8 100644 --- a/trunk/arch/arm/mach-omap2/Makefile +++ b/trunk/arch/arm/mach-omap2/Makefile @@ -11,9 +11,9 @@ hwmod-common = omap_hwmod.o \ omap_hwmod_common_data.o clock-common = clock.o clock_common_data.o \ clkt_dpll.o clkt_clksel.o -secure-common = omap-smc.o omap-secure.o +secure-common = omap-smc.o omap-secure.o -obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) diff --git a/trunk/arch/arm/mach-omap2/board-4430sdp.c b/trunk/arch/arm/mach-omap2/board-4430sdp.c index 39fba9df17fb..4e9071589bfb 100644 --- a/trunk/arch/arm/mach-omap2/board-4430sdp.c +++ b/trunk/arch/arm/mach-omap2/board-4430sdp.c @@ -52,8 +52,9 @@ #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ #define DLP_POWER_ON_GPIO 40 @@ -603,8 +604,9 @@ static void __init omap_sfh7741prox_init(void) } static struct gpio sdp4430_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -621,8 +623,7 @@ static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios)); } static struct nokia_dsi_panel_data dsi1_panel = { @@ -738,6 +739,10 @@ static void sdp4430_lcd_init(void) pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); } +static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device sdp4430_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -745,6 +750,7 @@ static struct omap_dss_device sdp4430_hdmi_device = { .platform_enable = sdp4430_panel_enable_hdmi, .platform_disable = sdp4430_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &sdp4430_hdmi_data, }; static struct picodlp_panel_data sdp4430_picodlp_pdata = { @@ -808,7 +814,7 @@ static struct omap_dss_board_info sdp4430_dss_data = { .default_device = &sdp4430_lcd_device, }; -static void omap_4430sdp_display_init(void) +static void __init omap_4430sdp_display_init(void) { int r; @@ -829,6 +835,10 @@ static void omap_4430sdp_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } #ifdef CONFIG_OMAP_MUX @@ -841,7 +851,7 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif -static void omap4_sdp4430_wifi_mux_init(void) +static void __init omap4_sdp4430_wifi_mux_init(void) { omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT | OMAP_PIN_OFF_WAKEUPENABLE); @@ -868,12 +878,17 @@ static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = { .board_tcxo_clock = WL12XX_TCXOCLOCK_26, }; -static void omap4_sdp4430_wifi_init(void) +static void __init omap4_sdp4430_wifi_init(void) { + int ret; + omap4_sdp4430_wifi_mux_init(); - if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data)) - pr_err("Error setting wl12xx data\n"); - platform_device_register(&omap_vwlan_device); + ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data); + if (ret) + pr_err("Error setting wl12xx data: %d\n", ret); + ret = platform_device_register(&omap_vwlan_device); + if (ret) + pr_err("Error registering wl12xx device: %d\n", ret); } static void __init omap_4430sdp_init(void) diff --git a/trunk/arch/arm/mach-omap2/board-cm-t35.c b/trunk/arch/arm/mach-omap2/board-cm-t35.c index e921e3be24a4..d73316ed4207 100644 --- a/trunk/arch/arm/mach-omap2/board-cm-t35.c +++ b/trunk/arch/arm/mach-omap2/board-cm-t35.c @@ -437,7 +437,7 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = { .reset_gpio_port[2] = -EINVAL }; -static void cm_t35_init_usbh(void) +static void __init cm_t35_init_usbh(void) { int err; diff --git a/trunk/arch/arm/mach-omap2/board-generic.c b/trunk/arch/arm/mach-omap2/board-generic.c index d58756060483..ad497620539b 100644 --- a/trunk/arch/arm/mach-omap2/board-generic.c +++ b/trunk/arch/arm/mach-omap2/board-generic.c @@ -17,6 +17,7 @@ #include #include +#include #include #include @@ -102,6 +103,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap242x_boards_compat, @@ -141,6 +143,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, @@ -160,6 +163,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, + .handle_irq = gic_handle_irq, .init_machine = omap4_init, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, diff --git a/trunk/arch/arm/mach-omap2/board-n8x0.c b/trunk/arch/arm/mach-omap2/board-n8x0.c index 42a4d11fad23..672262717601 100644 --- a/trunk/arch/arm/mach-omap2/board-n8x0.c +++ b/trunk/arch/arm/mach-omap2/board-n8x0.c @@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask) else *openp = 0; +#ifdef CONFIG_MMC_OMAP omap_mmc_notify_cover_event(mmc_device, index, *openp); +#else + pr_warn("MMC: notify cover event not available\n"); +#endif } static int n8x0_mmc_late_init(struct device *dev) diff --git a/trunk/arch/arm/mach-omap2/board-omap3evm.c b/trunk/arch/arm/mach-omap2/board-omap3evm.c index 003fe34c9343..c877236a8442 100644 --- a/trunk/arch/arm/mach-omap2/board-omap3evm.c +++ b/trunk/arch/arm/mach-omap2/board-omap3evm.c @@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1; platform_device_register(&leds_gpio); @@ -617,6 +617,21 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = { { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" }, }; +static void __init omap3_evm_wl12xx_init(void) +{ +#ifdef CONFIG_WL12XX_PLATFORM_DATA + int ret; + + /* WL12xx WLAN Init */ + ret = wl12xx_set_platform_data(&omap3evm_wlan_data); + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); + ret = platform_device_register(&omap3evm_wlan_regulator); + if (ret) + pr_err("error registering wl12xx device: %d\n", ret); +#endif +} + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); @@ -665,13 +680,7 @@ static void __init omap3_evm_init(void) omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); omap3_evm_display_init(); - -#ifdef CONFIG_WL12XX_PLATFORM_DATA - /* WL12xx WLAN Init */ - if (wl12xx_set_platform_data(&omap3evm_wlan_data)) - pr_err("error setting wl12xx data\n"); - platform_device_register(&omap3evm_wlan_regulator); -#endif + omap3_evm_wl12xx_init(); } MACHINE_START(OMAP3EVM, "OMAP3 EVM") diff --git a/trunk/arch/arm/mach-omap2/board-omap4panda.c b/trunk/arch/arm/mach-omap2/board-omap4panda.c index 30ad40db2cf3..28fc271f7031 100644 --- a/trunk/arch/arm/mach-omap2/board-omap4panda.c +++ b/trunk/arch/arm/mach-omap2/board-omap4panda.c @@ -51,8 +51,9 @@ #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ static int wl1271_gpios[] = {46, -1, -1}; @@ -413,8 +414,9 @@ int __init omap4_panda_dvi_init(void) } static struct gpio panda_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -431,10 +433,13 @@ static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); } +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device omap4_panda_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -442,6 +447,7 @@ static struct omap_dss_device omap4_panda_hdmi_device = { .platform_enable = omap4_panda_panel_enable_hdmi, .platform_disable = omap4_panda_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, }; static struct omap_dss_device *omap4_panda_dss_devices[] = { @@ -473,18 +479,24 @@ void omap4_panda_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; + int ret; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); - if (wl12xx_set_platform_data(&omap_panda_wlan_data)) - pr_err("error setting wl12xx data\n"); + ret = wl12xx_set_platform_data(&omap_panda_wlan_data); + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); diff --git a/trunk/arch/arm/mach-omap2/board-zoom-peripherals.c b/trunk/arch/arm/mach-omap2/board-zoom-peripherals.c index 8d7ce11cfeaf..c126461836ac 100644 --- a/trunk/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/trunk/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -296,8 +296,10 @@ static void enable_board_wakeup_source(void) void __init zoom_peripherals_init(void) { - if (wl12xx_set_platform_data(&omap_zoom_wlan_data)) - pr_err("error setting wl12xx data\n"); + int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data); + + if (ret) + pr_err("error setting wl12xx data: %d\n", ret); omap_i2c_init(); platform_device_register(&omap_vwlan_device); diff --git a/trunk/arch/arm/mach-omap2/common.h b/trunk/arch/arm/mach-omap2/common.h index febffde2ff10..7e9338e8d684 100644 --- a/trunk/arch/arm/mach-omap2/common.h +++ b/trunk/arch/arm/mach-omap2/common.h @@ -132,6 +132,7 @@ void omap3_map_io(void); void am33xx_map_io(void); void omap4_map_io(void); void ti81xx_map_io(void); +void omap_barriers_init(void); /** * omap_test_timeout - busy-loop, testing a condition diff --git a/trunk/arch/arm/mach-omap2/cpuidle44xx.c b/trunk/arch/arm/mach-omap2/cpuidle44xx.c index cfdbb86bc84e..72e018b9b260 100644 --- a/trunk/arch/arm/mach-omap2/cpuidle44xx.c +++ b/trunk/arch/arm/mach-omap2/cpuidle44xx.c @@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev, struct timespec ts_preidle, ts_postidle, ts_idle; u32 cpu1_state; int idle_time; - int new_state_idx; int cpu_id = smp_processor_id(); /* Used to keep track of the total time in idle */ @@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev, */ cpu1_state = pwrdm_read_pwrst(cpu1_pd); if (cpu1_state != PWRDM_POWER_OFF) { - new_state_idx = drv->safe_state_index; - cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]); + index = drv->safe_state_index; + cx = cpuidle_get_statedata(&dev->states_usage[index]); } if (index > 0) diff --git a/trunk/arch/arm/mach-omap2/devices.c b/trunk/arch/arm/mach-omap2/devices.c index 0b510ad01a00..283d11eae693 100644 --- a/trunk/arch/arm/mach-omap2/devices.c +++ b/trunk/arch/arm/mach-omap2/devices.c @@ -405,6 +405,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) break; default: pr_err("Invalid McSPI Revision value\n"); + kfree(pdata); return -EINVAL; } diff --git a/trunk/arch/arm/mach-omap2/display.c b/trunk/arch/arm/mach-omap2/display.c index 3c446d1a1781..3677b1f58b85 100644 --- a/trunk/arch/arm/mach-omap2/display.c +++ b/trunk/arch/arm/mach-omap2/display.c @@ -103,12 +103,8 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) u32 reg; u16 control_i2c_1; - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_cec", OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ omap_mux_init_signal("hdmi_ddc_scl", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_ddc_sda", diff --git a/trunk/arch/arm/mach-omap2/gpmc-smsc911x.c b/trunk/arch/arm/mach-omap2/gpmc-smsc911x.c index 997033129d26..bbb870c04a5e 100644 --- a/trunk/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/trunk/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -19,6 +19,8 @@ #include #include #include +#include +#include #include #include @@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .flags = SMSC911X_USE_16BIT, }; +static struct regulator_consumer_supply gpmc_smsc911x_supply[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + +/* Generic regulator definition to satisfy smsc911x */ +static struct regulator_init_data gpmc_smsc911x_reg_init_data = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply), + .consumer_supplies = gpmc_smsc911x_supply, +}; + +static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = { + .supply_name = "gpmc_smsc911x", + .microvolts = 3300000, + .gpio = -EINVAL, + .startup_delay = 0, + .enable_high = 0, + .enabled_at_boot = 1, + .init_data = &gpmc_smsc911x_reg_init_data, +}; + +/* + * Platform device id of 42 is a temporary fix to avoid conflicts + * with other reg-fixed-voltage devices. The real fix should + * involve the driver core providing a way of dynamically + * assigning a unique id on registration for platform devices + * in the same name space. + */ +static struct platform_device gpmc_smsc911x_regulator = { + .name = "reg-fixed-voltage", + .id = 42, + .dev = { + .platform_data = &gpmc_smsc911x_fixed_reg_data, + }, +}; + /* * Initialize smsc911x device connected to the GPMC. Note that we * assume that pin multiplexing is done in the board-*.c file, @@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_cfg = board_data; + ret = platform_device_register(&gpmc_smsc911x_regulator); + if (ret < 0) { + pr_err("Unable to register smsc911x regulators: %d\n", ret); + return; + } + if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { pr_err("Failed to request GPMC mem region\n"); return; diff --git a/trunk/arch/arm/mach-omap2/gpmc.c b/trunk/arch/arm/mach-omap2/gpmc.c index 130034bf01d5..dfffbbf4c009 100644 --- a/trunk/arch/arm/mach-omap2/gpmc.c +++ b/trunk/arch/arm/mach-omap2/gpmc.c @@ -528,7 +528,13 @@ int gpmc_cs_configure(int cs, int cmd, int wval) case GPMC_CONFIG_DEV_SIZE: regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + /* clear 2 target bits */ + regval &= ~GPMC_CONFIG1_DEVICESIZE(3); + + /* set the proper value */ regval |= GPMC_CONFIG1_DEVICESIZE(wval); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); break; diff --git a/trunk/arch/arm/mach-omap2/hsmmc.c b/trunk/arch/arm/mach-omap2/hsmmc.c index bd844af13af5..19dd1657245c 100644 --- a/trunk/arch/arm/mach-omap2/hsmmc.c +++ b/trunk/arch/arm/mach-omap2/hsmmc.c @@ -175,14 +175,15 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) { u32 reg; - if (mmc->slots[0].internal_clock) { - reg = omap_ctrl_readl(control_devconf1_offset); + reg = omap_ctrl_readl(control_devconf1_offset); + if (mmc->slots[0].internal_clock) reg |= OMAP2_MMCSDIO2ADPCLKISEL; - omap_ctrl_writel(reg, control_devconf1_offset); - } + else + reg &= ~OMAP2_MMCSDIO2ADPCLKISEL; + omap_ctrl_writel(reg, control_devconf1_offset); } -static void hsmmc23_before_set_reg(struct device *dev, int slot, +static void hsmmc2_before_set_reg(struct device *dev, int slot, int power_on, int vdd) { struct omap_mmc_platform_data *mmc = dev->platform_data; @@ -292,8 +293,8 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, } } -static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, - struct omap_mmc_platform_data *mmc) +static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, + struct omap_mmc_platform_data *mmc) { char *hc_name; @@ -407,14 +408,13 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, c->caps &= ~MMC_CAP_8_BIT_DATA; c->caps |= MMC_CAP_4_BIT_DATA; } - /* FALLTHROUGH */ - case 3: if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { /* off-chip level shifting, or none */ - mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; + mmc->slots[0].before_set_reg = hsmmc2_before_set_reg; mmc->slots[0].after_set_reg = NULL; } break; + case 3: case 4: case 5: mmc->slots[0].before_set_reg = NULL; @@ -428,9 +428,10 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, return 0; } +static int omap_hsmmc_done; #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 -void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) +void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) { struct omap_hwmod *oh; struct platform_device *pdev; @@ -487,10 +488,15 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) kfree(mmc_data); } -void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) +void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) { u32 reg; + if (omap_hsmmc_done) + return; + + omap_hsmmc_done = 1; + if (!cpu_is_omap44xx()) { if (cpu_is_omap2430()) { control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; diff --git a/trunk/arch/arm/mach-omap2/id.c b/trunk/arch/arm/mach-omap2/id.c index 6c5826605eae..719ee423abe2 100644 --- a/trunk/arch/arm/mach-omap2/id.c +++ b/trunk/arch/arm/mach-omap2/id.c @@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev) case 0xb944: omap_revision = AM335X_REV_ES1_0; *cpu_rev = "1.0"; + break; case 0xb8f2: switch (rev) { case 0: diff --git a/trunk/arch/arm/mach-omap2/io.c b/trunk/arch/arm/mach-omap2/io.c index 3f174d51f67f..fb11b44fbdec 100644 --- a/trunk/arch/arm/mach-omap2/io.c +++ b/trunk/arch/arm/mach-omap2/io.c @@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void) void __init omap44xx_map_common_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); + omap_barriers_init(); } #endif @@ -388,7 +389,7 @@ static void __init omap_hwmod_init_postsetup(void) omap_pm_if_early_init(); } -#ifdef CONFIG_ARCH_OMAP2 +#ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) { omap2_set_globals_242x(); @@ -400,7 +401,9 @@ void __init omap2420_init_early(void) omap_hwmod_init_postsetup(); omap2420_clk_init(); } +#endif +#ifdef CONFIG_SOC_OMAP2430 void __init omap2430_init_early(void) { omap2_set_globals_243x(); diff --git a/trunk/arch/arm/mach-omap2/mailbox.c b/trunk/arch/arm/mach-omap2/mailbox.c index 609ea2ded7e3..415a6f1cf419 100644 --- a/trunk/arch/arm/mach-omap2/mailbox.c +++ b/trunk/arch/arm/mach-omap2/mailbox.c @@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = { .ops = &omap2_mbox_ops, .priv = &omap2_mbox_iva_priv, }; +#endif -struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL }; +#ifdef CONFIG_ARCH_OMAP2 +struct omap_mbox *omap2_mboxes[] = { + &mbox_dsp_info, +#ifdef CONFIG_SOC_OMAP2420 + &mbox_iva_info, +#endif + NULL +}; #endif #if defined(CONFIG_ARCH_OMAP4) diff --git a/trunk/arch/arm/mach-omap2/mux.c b/trunk/arch/arm/mach-omap2/mux.c index e1cc75d1a57a..611a0e3d54ca 100644 --- a/trunk/arch/arm/mach-omap2/mux.c +++ b/trunk/arch/arm/mach-omap2/mux.c @@ -100,8 +100,8 @@ void omap_mux_write_array(struct omap_mux_partition *partition, static char *omap_mux_options; -static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, - int gpio, int val) +static int _omap_mux_init_gpio(struct omap_mux_partition *partition, + int gpio, int val) { struct omap_mux_entry *e; struct omap_mux *gpio_mux = NULL; @@ -145,7 +145,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, return 0; } -int __init omap_mux_init_gpio(int gpio, int val) +int omap_mux_init_gpio(int gpio, int val) { struct omap_mux_partition *partition; int ret; @@ -159,9 +159,9 @@ int __init omap_mux_init_gpio(int gpio, int val) return -ENODEV; } -static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, - const char *muxname, - struct omap_mux **found_mux) +static int _omap_mux_get_by_name(struct omap_mux_partition *partition, + const char *muxname, + struct omap_mux **found_mux) { struct omap_mux *mux = NULL; struct omap_mux_entry *e; @@ -218,7 +218,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int __init +static int omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) @@ -240,7 +240,7 @@ omap_mux_get_by_name(const char *muxname, return -ENODEV; } -int __init omap_mux_init_signal(const char *muxname, int val) +int omap_mux_init_signal(const char *muxname, int val) { struct omap_mux_partition *partition = NULL; struct omap_mux *mux = NULL; @@ -1094,8 +1094,8 @@ static void omap_mux_init_package(struct omap_mux *superset, omap_mux_package_init_balls(package_balls, superset); } -static void omap_mux_init_signals(struct omap_mux_partition *partition, - struct omap_board_mux *board_mux) +static void __init omap_mux_init_signals(struct omap_mux_partition *partition, + struct omap_board_mux *board_mux) { omap_mux_set_cmdline_signals(); omap_mux_write_array(partition, board_mux); @@ -1109,8 +1109,8 @@ static void omap_mux_init_package(struct omap_mux *superset, { } -static void omap_mux_init_signals(struct omap_mux_partition *partition, - struct omap_board_mux *board_mux) +static void __init omap_mux_init_signals(struct omap_mux_partition *partition, + struct omap_board_mux *board_mux) { } diff --git a/trunk/arch/arm/mach-omap2/omap-headsmp.S b/trunk/arch/arm/mach-omap2/omap-headsmp.S index b13ef7ef5ef4..503ac777a2ba 100644 --- a/trunk/arch/arm/mach-omap2/omap-headsmp.S +++ b/trunk/arch/arm/mach-omap2/omap-headsmp.S @@ -18,6 +18,7 @@ #include #include + __CPUINIT /* * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which diff --git a/trunk/arch/arm/mach-omap2/omap-iommu.c b/trunk/arch/arm/mach-omap2/omap-iommu.c index b8822048e409..ac49384d0285 100644 --- a/trunk/arch/arm/mach-omap2/omap-iommu.c +++ b/trunk/arch/arm/mach-omap2/omap-iommu.c @@ -150,7 +150,8 @@ static int __init omap_iommu_init(void) platform_device_put(omap_iommu_pdev[i]); return err; } -module_init(omap_iommu_init); +/* must be ready before omap3isp is probed */ +subsys_initcall(omap_iommu_init); static void __exit omap_iommu_exit(void) { diff --git a/trunk/arch/arm/mach-omap2/omap4-common.c b/trunk/arch/arm/mach-omap2/omap4-common.c index 40a8fbc07e4b..70de277f5c15 100644 --- a/trunk/arch/arm/mach-omap2/omap4-common.c +++ b/trunk/arch/arm/mach-omap2/omap4-common.c @@ -24,12 +24,14 @@ #include #include +#include #include #include #include "common.h" #include "omap4-sar-layout.h" +#include #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; @@ -43,6 +45,9 @@ static void __iomem *sar_ram_base; void __iomem *dram_sync, *sram_sync; +static phys_addr_t paddr; +static u32 size; + void omap_bus_sync(void) { if (dram_sync && sram_sync) { @@ -51,19 +56,22 @@ void omap_bus_sync(void) isb(); } } +EXPORT_SYMBOL(omap_bus_sync); -static int __init omap_barriers_init(void) +/* Steal one page physical memory for barrier implementation */ +int __init omap_barrier_reserve_memblock(void) { - struct map_desc dram_io_desc[1]; - phys_addr_t paddr; - u32 size; - - if (!cpu_is_omap44xx()) - return -ENODEV; size = ALIGN(PAGE_SIZE, SZ_1M); paddr = arm_memblock_steal(size, SZ_1M); + return 0; +} + +void __init omap_barriers_init(void) +{ + struct map_desc dram_io_desc[1]; + dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA; dram_io_desc[0].pfn = __phys_to_pfn(paddr); dram_io_desc[0].length = size; @@ -75,9 +83,10 @@ static int __init omap_barriers_init(void) pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n", (long long) paddr, dram_io_desc[0].virtual); - return 0; } -core_initcall(omap_barriers_init); +#else +void __init omap_barriers_init(void) +{} #endif void __init gic_init_irq(void) diff --git a/trunk/arch/arm/mach-omap2/omap_hwmod.c b/trunk/arch/arm/mach-omap2/omap_hwmod.c index 5192cabb40ed..eba6cd3816f5 100644 --- a/trunk/arch/arm/mach-omap2/omap_hwmod.c +++ b/trunk/arch/arm/mach-omap2/omap_hwmod.c @@ -1517,8 +1517,8 @@ static int _enable(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_INITIALIZED && oh->_state != _HWMOD_STATE_IDLE && oh->_state != _HWMOD_STATE_DISABLED) { - WARN(1, "omap_hwmod: %s: enabled state can only be entered " - "from initialized, idle, or disabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state\n", + oh->name); return -EINVAL; } @@ -1600,8 +1600,8 @@ static int _idle(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: idling\n", oh->name); if (oh->_state != _HWMOD_STATE_ENABLED) { - WARN(1, "omap_hwmod: %s: idle state can only be entered from " - "enabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n", + oh->name); return -EINVAL; } @@ -1682,8 +1682,8 @@ static int _shutdown(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_IDLE && oh->_state != _HWMOD_STATE_ENABLED) { - WARN(1, "omap_hwmod: %s: disabled state can only be entered " - "from idle, or enabled state\n", oh->name); + WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n", + oh->name); return -EINVAL; } @@ -2240,8 +2240,8 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh) BUG_ON(!oh); if (!oh->class->sysc || !oh->class->sysc->sysc_flags) { - WARN(1, "omap_device: %s: OCP barrier impossible due to " - "device configuration\n", oh->name); + WARN(1, "omap_device: %s: OCP barrier impossible due to device configuration\n", + oh->name); return; } diff --git a/trunk/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/trunk/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index c11273da5dcc..f08e442af397 100644 --- a/trunk/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/trunk/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -55,27 +55,6 @@ struct omap_hwmod_class omap2_dss_hwmod_class = { .reset = omap_dss_reset, }; -/* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -struct omap_hwmod_class omap2_dispc_hwmod_class = { - .name = "dispc", - .sysc = &omap2_dispc_sysc, -}; - /* * 'rfbi' class * remote frame buffer interface diff --git a/trunk/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/trunk/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 177dee20faef..2a6729741b06 100644 --- a/trunk/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/trunk/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -28,6 +28,28 @@ struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, { .dma_req = -1 } }; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap2_dispc_sysc, +}; + /* OMAP2xxx Timer Common */ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { .rev_offs = 0x0000, diff --git a/trunk/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/trunk/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 5324e8d93bc0..3c8dd928628e 100644 --- a/trunk/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/trunk/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1480,6 +1480,28 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = { .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), }; +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSC_HAS_ENAWAKEUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap3_dispc_sysc, +}; + /* l4_core -> dss_dispc */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { .master = &omap3xxx_l4_core_hwmod, @@ -1503,7 +1525,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = { static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .name = "dss_dispc", - .class = &omap2_dispc_hwmod_class, + .class = &omap3_dispc_hwmod_class, .mpu_irqs = omap2_dispc_irqs, .main_clk = "dss1_alwon_fck", .prcm = { @@ -3523,12 +3545,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_uart2_hwmod, &omap3xxx_uart3_hwmod, - /* dss class */ - &omap3xxx_dss_dispc_hwmod, - &omap3xxx_dss_dsi1_hwmod, - &omap3xxx_dss_rfbi_hwmod, - &omap3xxx_dss_venc_hwmod, - /* i2c class */ &omap3xxx_i2c1_hwmod, &omap3xxx_i2c2_hwmod, @@ -3635,6 +3651,15 @@ static __initdata struct omap_hwmod *am35xx_hwmods[] = { NULL }; +static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = { + /* dss class */ + &omap3xxx_dss_dispc_hwmod, + &omap3xxx_dss_dsi1_hwmod, + &omap3xxx_dss_rfbi_hwmod, + &omap3xxx_dss_venc_hwmod, + NULL +}; + int __init omap3xxx_hwmod_init(void) { int r; @@ -3708,6 +3733,21 @@ int __init omap3xxx_hwmod_init(void) if (h) r = omap_hwmod_register(h); + if (r < 0) + return r; + + /* + * DSS code presumes that dss_core hwmod is handled first, + * _before_ any other DSS related hwmods so register common + * DSS hwmods last to ensure that dss_core is already registered. + * Otherwise some change things may happen, for ex. if dispc + * is handled before dss_core and DSS is enabled in bootloader + * DIPSC will be reset with outputs enabled which sometimes leads + * to unrecoverable L3 error. + * XXX The long-term fix to this is to ensure modules are set up + * in dependency order in the hwmod core code. + */ + r = omap_hwmod_register(omap3xxx_dss_hwmods); return r; } diff --git a/trunk/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/trunk/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index f9f151081760..ef0524c10a84 100644 --- a/trunk/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/trunk/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1031,6 +1031,7 @@ static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = { static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { { + .name = "mpu", .pa_start = 0x4012e000, .pa_end = 0x4012e07f, .flags = ADDR_TYPE_RT @@ -1049,6 +1050,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = { { + .name = "dma", .pa_start = 0x4902e000, .pa_end = 0x4902e07f, .flags = ADDR_TYPE_RT diff --git a/trunk/arch/arm/mach-omap2/pm.c b/trunk/arch/arm/mach-omap2/pm.c index 1881fe915149..5a65dd04aa38 100644 --- a/trunk/arch/arm/mach-omap2/pm.c +++ b/trunk/arch/arm/mach-omap2/pm.c @@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, freq = clk->rate; clk_put(clk); + rcu_read_lock(); opp = opp_find_freq_ceil(dev, &freq); if (IS_ERR(opp)) { + rcu_read_unlock(); pr_err("%s: unable to find boot up OPP for vdd_%s\n", __func__, vdd_name); goto exit; } bootup_volt = opp_get_voltage(opp); + rcu_read_unlock(); if (!bootup_volt) { pr_err("%s: unable to find voltage corresponding " "to the bootup OPP for vdd_%s\n", __func__, vdd_name); diff --git a/trunk/arch/arm/mach-omap2/pm24xx.c b/trunk/arch/arm/mach-omap2/pm24xx.c index b8822f8b2891..23de98d03841 100644 --- a/trunk/arch/arm/mach-omap2/pm24xx.c +++ b/trunk/arch/arm/mach-omap2/pm24xx.c @@ -82,13 +82,7 @@ static int omap2_fclks_active(void) f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); - /* Ignore UART clocks. These are handled by UART core (serial.c) */ - f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK); - f2 &= ~OMAP24XX_EN_UART3_MASK; - - if (f1 | f2) - return 1; - return 0; + return (f1 | f2) ? 1 : 0; } static void omap2_enter_full_retention(void) diff --git a/trunk/arch/arm/mach-omap2/prm2xxx_3xxx.c b/trunk/arch/arm/mach-omap2/prm2xxx_3xxx.c index c1c4d86a79a8..9ce765407ad5 100644 --- a/trunk/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/trunk/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -19,6 +19,7 @@ #include "common.h" #include #include +#include #include "vp.h" diff --git a/trunk/arch/arm/mach-omap2/prm44xx.c b/trunk/arch/arm/mach-omap2/prm44xx.c index 33dd655e6aab..a1d6154dc120 100644 --- a/trunk/arch/arm/mach-omap2/prm44xx.c +++ b/trunk/arch/arm/mach-omap2/prm44xx.c @@ -19,6 +19,7 @@ #include "common.h" #include +#include #include #include "vp.h" diff --git a/trunk/arch/arm/mach-omap2/serial.c b/trunk/arch/arm/mach-omap2/serial.c index 247d89478f24..f590afc1f673 100644 --- a/trunk/arch/arm/mach-omap2/serial.c +++ b/trunk/arch/arm/mach-omap2/serial.c @@ -107,18 +107,18 @@ static void omap_uart_set_noidle(struct platform_device *pdev) omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); } -static void omap_uart_set_forceidle(struct platform_device *pdev) +static void omap_uart_set_smartidle(struct platform_device *pdev) { struct omap_device *od = to_omap_device(pdev); - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_FORCE); + omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); } #else static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) {} static void omap_uart_set_noidle(struct platform_device *pdev) {} -static void omap_uart_set_forceidle(struct platform_device *pdev) {} +static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -349,7 +349,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.set_forceidle = omap_uart_set_forceidle; + omap_up.set_forceidle = omap_uart_set_smartidle; omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; diff --git a/trunk/arch/arm/mach-omap2/smartreflex.c b/trunk/arch/arm/mach-omap2/smartreflex.c index 9dd93453e563..7e755bb0ffc4 100644 --- a/trunk/arch/arm/mach-omap2/smartreflex.c +++ b/trunk/arch/arm/mach-omap2/smartreflex.c @@ -897,7 +897,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - return ret; + goto err_iounmap; } } diff --git a/trunk/arch/arm/mach-omap2/timer.c b/trunk/arch/arm/mach-omap2/timer.c index 6eeff0e0ae01..5c9acea95761 100644 --- a/trunk/arch/arm/mach-omap2/timer.c +++ b/trunk/arch/arm/mach-omap2/timer.c @@ -270,7 +270,7 @@ static struct clocksource clocksource_gpt = { static u32 notrace dmtimer_read_sched_clock(void) { if (clksrc.reserved) - return __omap_dm_timer_read_counter(clksrc.io_base, 1); + return __omap_dm_timer_read_counter(&clksrc, 1); return 0; } diff --git a/trunk/arch/arm/mach-omap2/twl-common.c b/trunk/arch/arm/mach-omap2/twl-common.c index 10b20c652e5d..4b57757bf9d1 100644 --- a/trunk/arch/arm/mach-omap2/twl-common.c +++ b/trunk/arch/arm/mach-omap2/twl-common.c @@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = { .constraints = { .min_uV = 3300000, .max_uV = 3300000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE diff --git a/trunk/arch/arm/mach-omap2/usb-host.c b/trunk/arch/arm/mach-omap2/usb-host.c index 771dc781b746..f51348dafafd 100644 --- a/trunk/arch/arm/mach-omap2/usb-host.c +++ b/trunk/arch/arm/mach-omap2/usb-host.c @@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) void __init usbhs_init(const struct usbhs_omap_board_data *pdata) { struct omap_hwmod *oh[2]; - struct omap_device *od; + struct platform_device *pdev; int bus_id = -1; int i; @@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) return; } - od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, + pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, (void *)&usbhs_data, sizeof(usbhs_data), omap_uhhtll_latency, ARRAY_SIZE(omap_uhhtll_latency), false); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { pr_err("Could not build hwmod devices %s,%s\n", USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME); return; diff --git a/trunk/arch/arm/mach-omap2/vc.c b/trunk/arch/arm/mach-omap2/vc.c index 031d116fbf10..175b7d86d86a 100644 --- a/trunk/arch/arm/mach-omap2/vc.c +++ b/trunk/arch/arm/mach-omap2/vc.c @@ -247,7 +247,7 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) * omap_vc_i2c_init - initialize I2C interface to PMIC * @voltdm: voltage domain containing VC data * - * Use PMIC supplied seetings for I2C high-speed mode and + * Use PMIC supplied settings for I2C high-speed mode and * master code (if set) and program the VC I2C configuration * register. * @@ -265,8 +265,8 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) if (initialized) { if (voltdm->pmic->i2c_high_speed != i2c_high_speed) - pr_warn("%s: I2C config for all channels must match.", - __func__); + pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).", + __func__, voltdm->name, i2c_high_speed); return; } @@ -292,9 +292,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) u32 val; if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { - pr_err("%s: PMIC info requried to configure vc for" - "vdd_%s not populated.Hence cannot initialize vc\n", - __func__, voltdm->name); + pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name); return; } diff --git a/trunk/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/trunk/arch/arm/mach-omap2/voltagedomains3xxx_data.c index c005e2f5e383..57db2038b23c 100644 --- a/trunk/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/trunk/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP if (cpu_is_omap3630()) { omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; @@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void) omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; } +#endif if (cpu_is_omap3517() || cpu_is_omap3505()) voltdms = voltagedomains_am35xx; diff --git a/trunk/arch/arm/mach-omap2/voltagedomains44xx_data.c b/trunk/arch/arm/mach-omap2/voltagedomains44xx_data.c index 4e11d022595d..c3115f6853d4 100644 --- a/trunk/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/trunk/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data; omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; +#endif for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) voltdm->sys_clk.name = sys_clk_name; diff --git a/trunk/arch/arm/mach-omap2/vp.c b/trunk/arch/arm/mach-omap2/vp.c index 807391d84a9d..0df88820978d 100644 --- a/trunk/arch/arm/mach-omap2/vp.c +++ b/trunk/arch/arm/mach-omap2/vp.c @@ -41,6 +41,11 @@ void __init omap_vp_init(struct voltagedomain *voltdm) u32 val, sys_clk_rate, timeout, waittime; u32 vddmin, vddmax, vstepmin, vstepmax; + if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { + pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name); + return; + } + if (!voltdm->read || !voltdm->write) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", __func__, voltdm->name); diff --git a/trunk/arch/arm/mach-orion5x/common.c b/trunk/arch/arm/mach-orion5x/common.c index 0e28bae20bd4..5dad38ec00ea 100644 --- a/trunk/arch/arm/mach-orion5x/common.c +++ b/trunk/arch/arm/mach-orion5x/common.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -72,7 +73,8 @@ void __init orion5x_map_io(void) ****************************************************************************/ void __init orion5x_ehci0_init(void) { - orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL); + orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL, + EHCI_PHY_ORION); } diff --git a/trunk/arch/arm/mach-pxa/generic.h b/trunk/arch/arm/mach-pxa/generic.h index 0d729e6619df..42d5cca66257 100644 --- a/trunk/arch/arm/mach-pxa/generic.h +++ b/trunk/arch/arm/mach-pxa/generic.h @@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int); #endif extern struct syscore_ops pxa_irq_syscore_ops; -extern struct syscore_ops pxa_gpio_syscore_ops; extern struct syscore_ops pxa2xx_mfp_syscore_ops; extern struct syscore_ops pxa3xx_mfp_syscore_ops; diff --git a/trunk/arch/arm/mach-pxa/hx4700.c b/trunk/arch/arm/mach-pxa/hx4700.c index fb9b62dcf4ca..208eef1c0485 100644 --- a/trunk/arch/arm/mach-pxa/hx4700.c +++ b/trunk/arch/arm/mach-pxa/hx4700.c @@ -45,6 +45,7 @@ #include #include +#include #include