diff --git a/[refs] b/[refs] index 7a8afe47d3b1..1d3375b93b56 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: b391f8cf606679e97b02e3b9dca8a1d9956a5301 +refs/heads/master: 22be71ea8bf7e9f907e916bf9f6c2bbea9f42553 diff --git a/trunk/Documentation/ABI/testing/sysfs-class-scsi_host b/trunk/Documentation/ABI/testing/sysfs-class-scsi_host new file mode 100644 index 000000000000..29a4f892e433 --- /dev/null +++ b/trunk/Documentation/ABI/testing/sysfs-class-scsi_host @@ -0,0 +1,13 @@ +What: /sys/class/scsi_host/hostX/isci_id +Date: June 2011 +Contact: Dave Jiang +Description: + This file contains the enumerated host ID for the Intel + SCU controller. The Intel(R) C600 Series Chipset SATA/SAS + Storage Control Unit embeds up to two 4-port controllers in + a single PCI device. The controllers are enumerated in order + which usually means the lowest number scsi_host corresponds + with the first controller, but this association is not + guaranteed. The 'isci_id' attribute unambiguously identifies + the controller index: '0' for the first controller, + '1' for the second. diff --git a/trunk/Documentation/cgroups/memory.txt b/trunk/Documentation/cgroups/memory.txt index 6f3c598971fc..06eb6d957c83 100644 --- a/trunk/Documentation/cgroups/memory.txt +++ b/trunk/Documentation/cgroups/memory.txt @@ -380,7 +380,7 @@ will be charged as a new owner of it. 5.2 stat file -5.2.1 memory.stat file includes following statistics +memory.stat file includes following statistics # per-memory cgroup local status cache - # of bytes of page cache memory. @@ -438,89 +438,6 @@ Note: file_mapped is accounted only when the memory cgroup is owner of page cache.) -5.2.2 memory.vmscan_stat - -memory.vmscan_stat includes statistics information for memory scanning and -freeing, reclaiming. The statistics shows memory scanning information since -memory cgroup creation and can be reset to 0 by writing 0 as - - #echo 0 > ../memory.vmscan_stat - -This file contains following statistics. - -[param]_[file_or_anon]_pages_by_[reason]_[under_heararchy] -[param]_elapsed_ns_by_[reason]_[under_hierarchy] - -For example, - - scanned_file_pages_by_limit indicates the number of scanned - file pages at vmscan. - -Now, 3 parameters are supported - - scanned - the number of pages scanned by vmscan - rotated - the number of pages activated at vmscan - freed - the number of pages freed by vmscan - -If "rotated" is high against scanned/freed, the memcg seems busy. - -Now, 2 reason are supported - - limit - the memory cgroup's limit - system - global memory pressure + softlimit - (global memory pressure not under softlimit is not handled now) - -When under_hierarchy is added in the tail, the number indicates the -total memcg scan of its children and itself. - -elapsed_ns is a elapsed time in nanosecond. This may include sleep time -and not indicates CPU usage. So, please take this as just showing -latency. - -Here is an example. - -# cat /cgroup/memory/A/memory.vmscan_stat -scanned_pages_by_limit 9471864 -scanned_anon_pages_by_limit 6640629 -scanned_file_pages_by_limit 2831235 -rotated_pages_by_limit 4243974 -rotated_anon_pages_by_limit 3971968 -rotated_file_pages_by_limit 272006 -freed_pages_by_limit 2318492 -freed_anon_pages_by_limit 962052 -freed_file_pages_by_limit 1356440 -elapsed_ns_by_limit 351386416101 -scanned_pages_by_system 0 -scanned_anon_pages_by_system 0 -scanned_file_pages_by_system 0 -rotated_pages_by_system 0 -rotated_anon_pages_by_system 0 -rotated_file_pages_by_system 0 -freed_pages_by_system 0 -freed_anon_pages_by_system 0 -freed_file_pages_by_system 0 -elapsed_ns_by_system 0 -scanned_pages_by_limit_under_hierarchy 9471864 -scanned_anon_pages_by_limit_under_hierarchy 6640629 -scanned_file_pages_by_limit_under_hierarchy 2831235 -rotated_pages_by_limit_under_hierarchy 4243974 -rotated_anon_pages_by_limit_under_hierarchy 3971968 -rotated_file_pages_by_limit_under_hierarchy 272006 -freed_pages_by_limit_under_hierarchy 2318492 -freed_anon_pages_by_limit_under_hierarchy 962052 -freed_file_pages_by_limit_under_hierarchy 1356440 -elapsed_ns_by_limit_under_hierarchy 351386416101 -scanned_pages_by_system_under_hierarchy 0 -scanned_anon_pages_by_system_under_hierarchy 0 -scanned_file_pages_by_system_under_hierarchy 0 -rotated_pages_by_system_under_hierarchy 0 -rotated_anon_pages_by_system_under_hierarchy 0 -rotated_file_pages_by_system_under_hierarchy 0 -freed_pages_by_system_under_hierarchy 0 -freed_anon_pages_by_system_under_hierarchy 0 -freed_file_pages_by_system_under_hierarchy 0 -elapsed_ns_by_system_under_hierarchy 0 - 5.3 swappiness Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only. diff --git a/trunk/Documentation/hwmon/coretemp b/trunk/Documentation/hwmon/coretemp index fa8776ab9b18..84d46c0c71a3 100644 --- a/trunk/Documentation/hwmon/coretemp +++ b/trunk/Documentation/hwmon/coretemp @@ -35,13 +35,6 @@ the Out-Of-Spec bit. Following table summarizes the exported sysfs files: All Sysfs entries are named with their core_id (represented here by 'X'). tempX_input - Core temperature (in millidegrees Celsius). tempX_max - All cooling devices should be turned on (on Core2). - Initialized with IA32_THERM_INTERRUPT. When the CPU - temperature reaches this temperature, an interrupt is - generated and tempX_max_alarm is set. -tempX_max_hyst - If the CPU temperature falls below than temperature, - an interrupt is generated and tempX_max_alarm is reset. -tempX_max_alarm - Set if the temperature reaches or exceeds tempX_max. - Reset if the temperature drops to or below tempX_max_hyst. tempX_crit - Maximum junction temperature (in millidegrees Celsius). tempX_crit_alarm - Set when Out-of-spec bit is set, never clears. Correct CPU operation is no longer guaranteed. @@ -49,9 +42,10 @@ tempX_label - Contains string "Core X", where X is processor number. For Package temp, this will be "Physical id Y", where Y is the package number. -The TjMax temperature is set to 85 degrees C if undocumented model specific -register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as -(sometimes) documented in processor datasheet. +On CPU models which support it, TjMax is read from a model-specific register. +On other models, it is set to an arbitrary value based on weak heuristics. +If these heuristics don't work for you, you can pass the correct TjMax value +as a module parameter (tjmax). Appendix A. Known TjMax lists (TBD): Some information comes from ark.intel.com diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt index 614d0382e2cb..854ed5ca7e3f 100644 --- a/trunk/Documentation/kernel-parameters.txt +++ b/trunk/Documentation/kernel-parameters.txt @@ -2086,9 +2086,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Override pmtimer IOPort with a hex value. e.g. pmtmr=0x508 - pnp.debug [PNP] - Enable PNP debug messages. This depends on the - CONFIG_PNP_DEBUG_MESSAGES option. + pnp.debug=1 [PNP] + Enable PNP debug messages (depends on the + CONFIG_PNP_DEBUG_MESSAGES option). Change at run-time + via /sys/module/pnp/parameters/debug. We always show + current resource usage; turning this on also shows + possible settings and some assignment information. pnpacpi= [ACPI] { off } diff --git a/trunk/Documentation/networking/dmfe.txt b/trunk/Documentation/networking/dmfe.txt index 8006c227fda2..25320bf19c86 100644 --- a/trunk/Documentation/networking/dmfe.txt +++ b/trunk/Documentation/networking/dmfe.txt @@ -1,3 +1,5 @@ +Note: This driver doesn't have a maintainer. + Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux. This program is free software; you can redistribute it and/or @@ -55,7 +57,6 @@ Test and make sure PCI latency is now correct for all cases. Authors: Sten Wang : Original Author -Tobias Ringstrom : Current Maintainer Contributors: diff --git a/trunk/Documentation/vm/transhuge.txt b/trunk/Documentation/vm/transhuge.txt index 0924aaca3302..29bdf62aac09 100644 --- a/trunk/Documentation/vm/transhuge.txt +++ b/trunk/Documentation/vm/transhuge.txt @@ -123,10 +123,11 @@ be automatically shutdown if it's set to "never". khugepaged runs usually at low frequency so while one may not want to invoke defrag algorithms synchronously during the page faults, it should be worth invoking defrag at least in khugepaged. However it's -also possible to disable defrag in khugepaged: +also possible to disable defrag in khugepaged by writing 0 or enable +defrag in khugepaged by writing 1: -echo yes >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag -echo no >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag +echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag +echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag You can also control how many pages khugepaged should scan at each pass: diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index 28f65c249b97..ae8820e173a2 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -1278,7 +1278,6 @@ F: drivers/input/misc/ati_remote2.c ATLX ETHERNET DRIVERS M: Jay Cliburn M: Chris Snook -M: Jie Yang L: netdev@vger.kernel.org W: http://sourceforge.net/projects/atl1 W: http://atl1.sourceforge.net @@ -1574,7 +1573,6 @@ F: drivers/scsi/bfa/ BROCADE BNA 10 GIGABIT ETHERNET DRIVER M: Rasesh Mody -M: Debashis Dutt L: netdev@vger.kernel.org S: Supported F: drivers/net/bna/ @@ -1758,7 +1756,6 @@ F: Documentation/zh_CN/ CISCO VIC ETHERNET NIC DRIVER M: Christian Benvenuti -M: Vasanthy Kolluri M: Roopa Prabhu M: David Wang S: Supported @@ -3262,6 +3259,17 @@ F: Documentation/input/multi-touch-protocol.txt F: drivers/input/input-mt.c K: \b(ABS|SYN)_MT_ +INTEL C600 SERIES SAS CONTROLLER DRIVER +M: Intel SCU Linux support +M: Dan Williams +M: Dave Jiang +M: Ed Nadolski +L: linux-scsi@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git +S: Maintained +F: drivers/scsi/isci/ +F: firmware/isci/ + INTEL IDLE DRIVER M: Len Brown L: linux-pm@lists.linux-foundation.org @@ -4404,7 +4412,8 @@ L: netfilter@vger.kernel.org L: coreteam@netfilter.org W: http://www.netfilter.org/ W: http://www.iptables.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git S: Supported F: include/linux/netfilter* F: include/linux/netfilter/ @@ -4774,7 +4783,7 @@ F: drivers/net/wireless/orinoco/ OSD LIBRARY and FILESYSTEM M: Boaz Harrosh -M: Benny Halevy +M: Benny Halevy L: osd-dev@open-osd.org W: http://open-osd.org T: git git://git.open-osd.org/open-osd.git @@ -7200,6 +7209,9 @@ W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices S: Supported F: Documentation/hwmon/wm83?? F: drivers/leds/leds-wm83*.c +F: drivers/input/misc/wm831x-on.c +F: drivers/input/touchscreen/wm831x-ts.c +F: drivers/input/touchscreen/wm97*.c F: drivers/mfd/wm8*.c F: drivers/power/wm83*.c F: drivers/rtc/rtc-wm83*.c @@ -7209,6 +7221,7 @@ F: drivers/watchdog/wm83*_wdt.c F: include/linux/mfd/wm831x/ F: include/linux/mfd/wm8350/ F: include/linux/mfd/wm8400* +F: include/linux/wm97xx.h F: include/sound/wm????.h F: sound/soc/codecs/wm* diff --git a/trunk/Makefile b/trunk/Makefile index 522fa4784e69..73bb458ecfd3 100644 --- a/trunk/Makefile +++ b/trunk/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 1 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc8 NAME = "Divemaster Edition" # *DOCUMENTATION* diff --git a/trunk/arch/alpha/Kconfig b/trunk/arch/alpha/Kconfig index 60cde53d266c..8bb936226dee 100644 --- a/trunk/arch/alpha/Kconfig +++ b/trunk/arch/alpha/Kconfig @@ -51,7 +51,7 @@ config GENERIC_CMOS_UPDATE def_bool y config GENERIC_GPIO - def_bool y + bool config ZONE_DMA bool diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig index 42401daa165f..bea81d018312 100644 --- a/trunk/arch/arm/Kconfig +++ b/trunk/arch/arm/Kconfig @@ -1280,6 +1280,20 @@ config ARM_ERRATA_364296 processor into full low interrupt latency mode. ARM11MPCore is not affected. +config ARM_ERRATA_764369 + bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" + depends on CPU_V7 && SMP + help + This option enables the workaround for erratum 764369 + affecting Cortex-A9 MPCore with two or more processors (all + current revisions). Under certain timing circumstances, a data + cache line maintenance operation by MVA targeting an Inner + Shareable memory region may fail to proceed up to either the + Point of Coherency or to the Point of Unification of the + system. This workaround adds a DSB instruction before the + relevant cache maintenance functions and sets a specific bit + in the diagnostic control register of the SCU. + endmenu source "arch/arm/common/Kconfig" diff --git a/trunk/arch/arm/boot/dts/tegra-harmony.dts b/trunk/arch/arm/boot/dts/tegra-harmony.dts index 4c053340ce33..e5818668d091 100644 --- a/trunk/arch/arm/boot/dts/tegra-harmony.dts +++ b/trunk/arch/arm/boot/dts/tegra-harmony.dts @@ -57,14 +57,14 @@ }; sdhci@c8000200 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 155 0>; /* power, gpio PT3 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ }; sdhci@c8000600 { - gpios = <&gpio 58 0>, /* cd, gpio PH2 */ - <&gpio 59 0>, /* wp, gpio PH3 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/trunk/arch/arm/boot/dts/tegra-seaboard.dts b/trunk/arch/arm/boot/dts/tegra-seaboard.dts index 1940cae00748..64cedca6fc79 100644 --- a/trunk/arch/arm/boot/dts/tegra-seaboard.dts +++ b/trunk/arch/arm/boot/dts/tegra-seaboard.dts @@ -21,8 +21,8 @@ }; sdhci@c8000400 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/trunk/arch/arm/configs/exynos4_defconfig b/trunk/arch/arm/configs/exynos4_defconfig index da53ff3b4d70..cd40bb56e568 100644 --- a/trunk/arch/arm/configs/exynos4_defconfig +++ b/trunk/arch/arm/configs/exynos4_defconfig @@ -11,6 +11,7 @@ CONFIG_MACH_SMDKV310=y CONFIG_MACH_ARMLEX4210=y CONFIG_MACH_UNIVERSAL_C210=y CONFIG_MACH_NURI=y +CONFIG_MACH_ORIGEN=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y diff --git a/trunk/arch/arm/include/asm/futex.h b/trunk/arch/arm/include/asm/futex.h index 8c73900da9ed..253cc86318bf 100644 --- a/trunk/arch/arm/include/asm/futex.h +++ b/trunk/arch/arm/include/asm/futex.h @@ -25,17 +25,17 @@ #ifdef CONFIG_SMP -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ smp_mb(); \ __asm__ __volatile__( \ - "1: ldrex %1, [%2]\n" \ + "1: ldrex %1, [%3]\n" \ " " insn "\n" \ - "2: strex %1, %0, [%2]\n" \ - " teq %1, #0\n" \ + "2: strex %2, %0, [%3]\n" \ + " teq %2, #0\n" \ " bne 1b\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, #include #include -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1, [%2]\n" \ + "1: " T(ldr) " %1, [%3]\n" \ " " insn "\n" \ - "2: " T(str) " %0, [%2]\n" \ + "2: " T(str) " %0, [%3]\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) int cmp = (encoded_op >> 24) & 15; int oparg = (encoded_op << 8) >> 20; int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; + int oldval = 0, ret, tmp; if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) oparg = 1 << oparg; @@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg); + __futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; default: ret = -ENOSYS; diff --git a/trunk/arch/arm/include/asm/hardware/pl080.h b/trunk/arch/arm/include/asm/hardware/pl080.h index e4a04e4e5627..33c78d7af2e1 100644 --- a/trunk/arch/arm/include/asm/hardware/pl080.h +++ b/trunk/arch/arm/include/asm/hardware/pl080.h @@ -21,6 +21,9 @@ * OneNAND features. */ +#ifndef ASM_PL080_H +#define ASM_PL080_H + #define PL080_INT_STATUS (0x00) #define PL080_TC_STATUS (0x04) #define PL080_TC_CLEAR (0x08) @@ -138,3 +141,4 @@ struct pl080s_lli { u32 control1; }; +#endif /* ASM_PL080_H */ diff --git a/trunk/arch/arm/include/asm/unistd.h b/trunk/arch/arm/include/asm/unistd.h index 2c04ed5efeb5..c60a2944f95b 100644 --- a/trunk/arch/arm/include/asm/unistd.h +++ b/trunk/arch/arm/include/asm/unistd.h @@ -478,8 +478,8 @@ /* * Unimplemented (or alternatively implemented) syscalls */ -#define __IGNORE_fadvise64_64 1 -#define __IGNORE_migrate_pages 1 +#define __IGNORE_fadvise64_64 +#define __IGNORE_migrate_pages #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/trunk/arch/arm/kernel/smp_scu.c b/trunk/arch/arm/kernel/smp_scu.c index 79ed5e7f204a..7fcddb75c877 100644 --- a/trunk/arch/arm/kernel/smp_scu.c +++ b/trunk/arch/arm/kernel/smp_scu.c @@ -13,6 +13,7 @@ #include #include +#include #define SCU_CTRL 0x00 #define SCU_CONFIG 0x04 @@ -37,6 +38,15 @@ void __init scu_enable(void __iomem *scu_base) { u32 scu_ctrl; +#ifdef CONFIG_ARM_ERRATA_764369 + /* Cortex-A9 only */ + if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) { + scu_ctrl = __raw_readl(scu_base + 0x30); + if (!(scu_ctrl & 1)) + __raw_writel(scu_ctrl | 0x1, scu_base + 0x30); + } +#endif + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); /* already enabled? */ if (scu_ctrl & 1) diff --git a/trunk/arch/arm/kernel/vmlinux.lds.S b/trunk/arch/arm/kernel/vmlinux.lds.S index bf977f8514f6..4e66f62b8d41 100644 --- a/trunk/arch/arm/kernel/vmlinux.lds.S +++ b/trunk/arch/arm/kernel/vmlinux.lds.S @@ -23,8 +23,10 @@ #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) #define ARM_EXIT_KEEP(x) x +#define ARM_EXIT_DISCARD(x) #else #define ARM_EXIT_KEEP(x) +#define ARM_EXIT_DISCARD(x) x #endif OUTPUT_ARCH(arm) @@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4; SECTIONS { /* + * XXX: The linker does not define how output sections are + * assigned to input sections when there are multiple statements + * matching the same input section name. There is no documented + * order of matching. + * * unwind exit sections must be discarded before the rest of the * unwind sections get included. */ @@ -47,6 +54,9 @@ SECTIONS *(.ARM.extab.exit.text) ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) + ARM_EXIT_DISCARD(EXIT_TEXT) + ARM_EXIT_DISCARD(EXIT_DATA) + EXIT_CALL #ifndef CONFIG_HOTPLUG *(.ARM.exidx.devexit.text) *(.ARM.extab.devexit.text) @@ -58,6 +68,8 @@ SECTIONS #ifndef CONFIG_SMP_ON_UP *(.alt.smp.init) #endif + *(.discard) + *(.discard.*) } #ifdef CONFIG_XIP_KERNEL @@ -279,9 +291,6 @@ SECTIONS STABS_DEBUG .comment 0 : { *(.comment) } - - /* Default discards */ - DISCARDS } /* diff --git a/trunk/arch/arm/mach-dove/common.c b/trunk/arch/arm/mach-dove/common.c index 83dce859886d..a9e0dae86a26 100644 --- a/trunk/arch/arm/mach-dove/common.c +++ b/trunk/arch/arm/mach-dove/common.c @@ -158,7 +158,7 @@ void __init dove_spi0_init(void) void __init dove_spi1_init(void) { - orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk()); + orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk()); } /***************************************************************************** diff --git a/trunk/arch/arm/mach-exynos4/Kconfig b/trunk/arch/arm/mach-exynos4/Kconfig index 0c77ab99fa16..f28e99ce3998 100644 --- a/trunk/arch/arm/mach-exynos4/Kconfig +++ b/trunk/arch/arm/mach-exynos4/Kconfig @@ -11,7 +11,7 @@ if ARCH_EXYNOS4 config CPU_EXYNOS4210 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV help Enable EXYNOS4210 CPU support @@ -139,6 +139,7 @@ config MACH_SMDKV310 select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_I2C1 + select S5P_DEV_MFC select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 @@ -178,6 +179,7 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_FIMD0 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 @@ -187,6 +189,7 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_MFC select S5P_DEV_ONENAND select EXYNOS4_DEV_PD + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 @@ -199,6 +202,8 @@ config MACH_NURI bool "Mobile NURI Board" select CPU_EXYNOS4210 select S3C_DEV_WDT + select S3C_DEV_RTC + select S5P_DEV_FIMD0 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 @@ -208,6 +213,7 @@ config MACH_NURI select S5P_DEV_MFC select S5P_DEV_USB_EHCI select EXYNOS4_DEV_PD + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 @@ -218,6 +224,30 @@ config MACH_NURI help Machine support for Samsung Mobile NURI Board. +config MACH_ORIGEN + bool "ORIGEN" + select CPU_EXYNOS4210 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC2 + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_FIMC3 + select S5P_DEV_FIMD0 + select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_TV + select S5P_DEV_USB_EHCI + select EXYNOS4_DEV_PD + select SAMSUNG_DEV_BACKLIGHT + select SAMSUNG_DEV_PWM + select EXYNOS4_SETUP_FIMD0 + select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY + help + Machine support for ORIGEN based on Samsung EXYNOS4210 + endmenu comment "Configuration for HSMMC bus width" diff --git a/trunk/arch/arm/mach-exynos4/Makefile b/trunk/arch/arm/mach-exynos4/Makefile index b7fe1d7b0b1f..cbc976701432 100644 --- a/trunk/arch/arm/mach-exynos4/Makefile +++ b/trunk/arch/arm/mach-exynos4/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o obj-$(CONFIG_MACH_NURI) += mach-nuri.o +obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o # device support diff --git a/trunk/arch/arm/mach-exynos4/clock.c b/trunk/arch/arm/mach-exynos4/clock.c index 1561b036a9bf..e85c481ec7ad 100644 --- a/trunk/arch/arm/mach-exynos4/clock.c +++ b/trunk/arch/arm/mach-exynos4/clock.c @@ -43,6 +43,11 @@ static struct clk clk_sclk_usbphy1 = { .name = "sclk_usbphy1", }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable); @@ -454,13 +459,13 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 10), }, { - .name = "pdma", - .devname = "s3c-pl330.0", + .name = "dma", + .devname = "dma-pl330.0", .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 0), }, { - .name = "pdma", - .devname = "s3c-pl330.1", + .name = "dma", + .devname = "dma-pl330.1", .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 1), }, { @@ -899,8 +904,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.0", + .name = "sclk_cam0", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 16), }, @@ -909,8 +913,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.1", + .name = "sclk_cam1", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 20), }, @@ -1160,7 +1163,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void) vpllsrc = clk_get_rate(&clk_vpllsrc.clk); vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650); + __raw_readl(S5P_VPLL_CON1), pll_4650c); clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; @@ -1210,5 +1213,7 @@ void __init exynos4_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); + s3c_pwmclk_init(); } diff --git a/trunk/arch/arm/mach-exynos4/dma.c b/trunk/arch/arm/mach-exynos4/dma.c index 564bb530f332..9667c61e64fb 100644 --- a/trunk/arch/arm/mach-exynos4/dma.c +++ b/trunk/arch/arm/mach-exynos4/dma.c @@ -21,151 +21,229 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include +#include +#include +#include #include #include #include #include - -#include +#include static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource exynos4_pdma0_resource[] = { - [0] = { - .start = EXYNOS4_PA_PDMA0, - .end = EXYNOS4_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA0, - .end = IRQ_PDMA0, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri pdma0_peri[28] = { + { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MSM_REQ0, + }, { + .peri_id = (u8)DMACH_MSM_REQ2, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART4_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART4_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS4_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS4_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_AC97_MICIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMOUT, + .rqtype = MEMTODEV, }, }; -static struct s3c_pl330_platdata exynos4_pdma0_pdata = { - .peri = { - [0] = DMACH_PCM0_RX, - [1] = DMACH_PCM0_TX, - [2] = DMACH_PCM2_RX, - [3] = DMACH_PCM2_TX, - [4] = DMACH_MSM_REQ0, - [5] = DMACH_MSM_REQ2, - [6] = DMACH_SPI0_RX, - [7] = DMACH_SPI0_TX, - [8] = DMACH_SPI2_RX, - [9] = DMACH_SPI2_TX, - [10] = DMACH_I2S0S_TX, - [11] = DMACH_I2S0_RX, - [12] = DMACH_I2S0_TX, - [13] = DMACH_I2S2_RX, - [14] = DMACH_I2S2_TX, - [15] = DMACH_UART0_RX, - [16] = DMACH_UART0_TX, - [17] = DMACH_UART2_RX, - [18] = DMACH_UART2_TX, - [19] = DMACH_UART4_RX, - [20] = DMACH_UART4_TX, - [21] = DMACH_SLIMBUS0_RX, - [22] = DMACH_SLIMBUS0_TX, - [23] = DMACH_SLIMBUS2_RX, - [24] = DMACH_SLIMBUS2_TX, - [25] = DMACH_SLIMBUS4_RX, - [26] = DMACH_SLIMBUS4_TX, - [27] = DMACH_AC97_MICIN, - [28] = DMACH_AC97_PCMIN, - [29] = DMACH_AC97_PCMOUT, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata exynos4_pdma0_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma0_peri), + .peri = pdma0_peri, }; -static struct platform_device exynos4_device_pdma0 = { - .name = "s3c-pl330", - .id = 0, - .num_resources = ARRAY_SIZE(exynos4_pdma0_resource), - .resource = exynos4_pdma0_resource, - .dev = { +struct amba_device exynos4_device_pdma0 = { + .dev = { + .init_name = "dma-pl330.0", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &exynos4_pdma0_pdata, }, + .res = { + .start = EXYNOS4_PA_PDMA0, + .end = EXYNOS4_PA_PDMA0 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA0, NO_IRQ}, + .periphid = 0x00041330, }; -static struct resource exynos4_pdma1_resource[] = { - [0] = { - .start = EXYNOS4_PA_PDMA1, - .end = EXYNOS4_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA1, - .end = IRQ_PDMA1, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri pdma1_peri[25] = { + { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MSM_REQ1, + }, { + .peri_id = (u8)DMACH_MSM_REQ3, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS5_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS5_TX, + .rqtype = MEMTODEV, }, }; -static struct s3c_pl330_platdata exynos4_pdma1_pdata = { - .peri = { - [0] = DMACH_PCM0_RX, - [1] = DMACH_PCM0_TX, - [2] = DMACH_PCM1_RX, - [3] = DMACH_PCM1_TX, - [4] = DMACH_MSM_REQ1, - [5] = DMACH_MSM_REQ3, - [6] = DMACH_SPI1_RX, - [7] = DMACH_SPI1_TX, - [8] = DMACH_I2S0S_TX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S1_RX, - [12] = DMACH_I2S1_TX, - [13] = DMACH_UART0_RX, - [14] = DMACH_UART0_TX, - [15] = DMACH_UART1_RX, - [16] = DMACH_UART1_TX, - [17] = DMACH_UART3_RX, - [18] = DMACH_UART3_TX, - [19] = DMACH_SLIMBUS1_RX, - [20] = DMACH_SLIMBUS1_TX, - [21] = DMACH_SLIMBUS3_RX, - [22] = DMACH_SLIMBUS3_TX, - [23] = DMACH_SLIMBUS5_RX, - [24] = DMACH_SLIMBUS5_TX, - [25] = DMACH_SLIMBUS0AUX_RX, - [26] = DMACH_SLIMBUS0AUX_TX, - [27] = DMACH_SPDIF, - [28] = DMACH_MAX, - [29] = DMACH_MAX, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata exynos4_pdma1_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma1_peri), + .peri = pdma1_peri, }; -static struct platform_device exynos4_device_pdma1 = { - .name = "s3c-pl330", - .id = 1, - .num_resources = ARRAY_SIZE(exynos4_pdma1_resource), - .resource = exynos4_pdma1_resource, - .dev = { +struct amba_device exynos4_device_pdma1 = { + .dev = { + .init_name = "dma-pl330.1", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &exynos4_pdma1_pdata, }, -}; - -static struct platform_device *exynos4_dmacs[] __initdata = { - &exynos4_device_pdma0, - &exynos4_device_pdma1, + .res = { + .start = EXYNOS4_PA_PDMA1, + .end = EXYNOS4_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA1, NO_IRQ}, + .periphid = 0x00041330, }; static int __init exynos4_dma_init(void) { - platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs)); + amba_device_register(&exynos4_device_pdma0, &iomem_resource); + amba_device_register(&exynos4_device_pdma1, &iomem_resource); return 0; } diff --git a/trunk/arch/arm/mach-exynos4/include/mach/dma.h b/trunk/arch/arm/mach-exynos4/include/mach/dma.h index 81209eb1409b..201842a3769e 100644 --- a/trunk/arch/arm/mach-exynos4/include/mach/dma.h +++ b/trunk/arch/arm/mach-exynos4/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ -#include +/* This platform uses the common DMA API driver for PL330 */ +#include #endif /* __MACH_DMA_H */ diff --git a/trunk/arch/arm/mach-exynos4/mach-nuri.c b/trunk/arch/arm/mach-exynos4/mach-nuri.c index 43be71b799cb..bbd13f454151 100644 --- a/trunk/arch/arm/mach-exynos4/mach-nuri.c +++ b/trunk/arch/arm/mach-exynos4/mach-nuri.c @@ -32,10 +32,12 @@ #include #include +#include #include #include #include #include +#include #include #include #include @@ -199,6 +201,33 @@ static struct platform_device nuri_gpio_keys = { }, }; +/* Frame Buffer */ +static struct s3c_fb_pd_win nuri_fb_win0 = { + .win_mode = { + .left_margin = 64, + .right_margin = 16, + .upper_margin = 64, + .lower_margin = 1, + .hsync_len = 48, + .vsync_len = 3, + .xres = 1280, + .yres = 800, + .refresh = 60, + }, + .max_bpp = 24, + .default_bpp = 16, + .virtual_x = 1280, + .virtual_y = 800, +}; + +static struct s3c_fb_platdata nuri_fb_pdata __initdata = { + .win[0] = &nuri_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | + VIDCON0_CLKSEL_LCD, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; + static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power) { int gpio = EXYNOS4_GPE1(5); @@ -1092,6 +1121,7 @@ static struct platform_device *nuri_devices[] __initdata = { /* Samsung Platform Devices */ &s3c_device_i2c5, /* PMIC should initialize first */ &emmc_fixed_voltage, + &s5p_device_fimd0, &s3c_device_hsmmc0, &s3c_device_hsmmc2, &s3c_device_hsmmc3, @@ -1106,6 +1136,7 @@ static struct platform_device *nuri_devices[] __initdata = { &s5p_device_mfc_l, &s5p_device_mfc_r, &exynos4_device_pd[PD_MFC], + &exynos4_device_pd[PD_LCD0], /* NURI Devices */ &nuri_gpio_keys, @@ -1142,12 +1173,15 @@ static void __init nuri_machine_init(void) i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3)); i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs)); + s5p_fimd0_set_platdata(&nuri_fb_pdata); + nuri_ehci_init(); clk_xusbxti.rate = 24000000; /* Last */ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; + s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev; } MACHINE_START(NURI, "NURI") diff --git a/trunk/arch/arm/mach-exynos4/mach-origen.c b/trunk/arch/arm/mach-exynos4/mach-origen.c new file mode 100644 index 000000000000..18909cf6c07d --- /dev/null +++ b/trunk/arch/arm/mach-exynos4/mach-origen.c @@ -0,0 +1,679 @@ +/* linux/arch/arm/mach-exynos4/mach-origen.c + * + * Copyright (c) 2011 Insignal Co., Ltd. + * http://www.insignal.co.kr/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include