diff --git a/[refs] b/[refs] index e5e54a60393d..9df8cc76a011 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 24e30c9417230b359bf6dfeb923e90138df7c112 +refs/heads/master: f0390669d13b0a1592fc7906445b4f6c8ec5af23 diff --git a/trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index 3a268127b054..bc50899e0c81 100644 --- a/trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -81,7 +81,8 @@ PA31 TXD4 Required properties for pin configuration node: - atmel,pins: 4 integers array, represents a group of pins mux and config setting. The format is atmel,pins = . - The PERIPH 0 means gpio. + The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B... + PIN_BANK 0 is pioA, PIN_BANK 1 is pioB... Bits used for CONFIG: PULL_UP (1 << 0): indicate this pin need a pull up. @@ -126,7 +127,7 @@ pinctrl@fffff400 { pinctrl_dbgu: dbgu-0 { atmel,pins = <1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x1>; /* PB15 periph with pullup */ + 1 15 0x1 0x1>; /* PB15 periph A with pullup */ }; }; }; diff --git a/trunk/Documentation/filesystems/f2fs.txt b/trunk/Documentation/filesystems/f2fs.txt index 8fbd8b46ee34..dcf338e62b71 100644 --- a/trunk/Documentation/filesystems/f2fs.txt +++ b/trunk/Documentation/filesystems/f2fs.txt @@ -175,9 +175,9 @@ consists of multiple segments as described below. align with the zone size <-| |-> align with the segment size _________________________________________________________________________ - | | | Node | Segment | Segment | | - | Superblock | Checkpoint | Address | Info. | Summary | Main | - | (SB) | (CP) | Table (NAT) | Table (SIT) | Area (SSA) | | + | | | Segment | Node | Segment | | + | Superblock | Checkpoint | Info. | Address | Summary | Main | + | (SB) | (CP) | Table (SIT) | Table (NAT) | Area (SSA) | | |____________|_____2______|______N______|______N______|______N_____|__N___| . . . . @@ -200,14 +200,14 @@ consists of multiple segments as described below. : It contains file system information, bitmaps for valid NAT/SIT sets, orphan inode lists, and summary entries of current active segments. -- Node Address Table (NAT) - : It is composed of a block address table for all the node blocks stored in - Main area. - - Segment Information Table (SIT) : It contains segment information such as valid block count and bitmap for the validity of all the blocks. +- Node Address Table (NAT) + : It is composed of a block address table for all the node blocks stored in + Main area. + - Segment Summary Area (SSA) : It contains summary entries which contains the owner information of all the data and node blocks stored in Main area. @@ -236,13 +236,13 @@ For file system consistency, each CP points to which NAT and SIT copies are valid, as shown as below. +--------+----------+---------+ - | CP | NAT | SIT | + | CP | SIT | NAT | +--------+----------+---------+ . . . . . . . . . . . . +-------+-------+--------+--------+--------+--------+ - | CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 | + | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 | +-------+-------+--------+--------+--------+--------+ | ^ ^ | | | diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index 915564eda145..fd9959c174e8 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -228,7 +228,7 @@ S: Maintained F: drivers/platform/x86/acerhdf.c ACER WMI LAPTOP EXTRAS -M: Joey Lee +M: "Lee, Chun-Yi" L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/acer-wmi.c @@ -648,7 +648,7 @@ F: arch/arm/ ARM SUB-ARCHITECTURES L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: MAINTAINED +S: Maintained F: arch/arm/mach-*/ F: arch/arm/plat-*/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git @@ -1351,6 +1351,14 @@ W: http://wireless.kernel.org/en/users/Drivers/ath9k S: Supported F: drivers/net/wireless/ath/ath9k/ +WILOCITY WIL6210 WIRELESS DRIVER +M: Vladimir Kondratiev +L: linux-wireless@vger.kernel.org +L: wil6210@qca.qualcomm.com +S: Supported +W: http://wireless.kernel.org/en/users/Drivers/wil6210 +F: drivers/net/wireless/ath/wil6210/ + CARL9170 LINUX COMMUNITY WIRELESS DRIVER M: Christian Lamparter L: linux-wireless@vger.kernel.org @@ -1964,9 +1972,9 @@ S: Maintained F: drivers/usb/host/ohci-ep93xx.c CIRRUS LOGIC CS4270 SOUND DRIVER -M: Timur Tabi +M: Timur Tabi L: alsa-devel@alsa-project.org (moderated for non-subscribers) -S: Supported +S: Odd Fixes F: sound/soc/codecs/cs4270* CLEANCACHE API @@ -3183,9 +3191,9 @@ F: include/uapi/video/ F: include/uapi/linux/fb.h FREESCALE DIU FRAMEBUFFER DRIVER -M: Timur Tabi +M: Timur Tabi L: linux-fbdev@vger.kernel.org -S: Supported +S: Maintained F: drivers/video/fsl-diu-fb.* FREESCALE DMA DRIVER @@ -3220,9 +3228,8 @@ F: drivers/net/ethernet/freescale/fs_enet/ F: include/linux/fs_enet_pd.h FREESCALE QUICC ENGINE LIBRARY -M: Timur Tabi L: linuxppc-dev@lists.ozlabs.org -S: Supported +S: Orphan F: arch/powerpc/sysdev/qe_lib/ F: arch/powerpc/include/asm/*qe.h @@ -3241,16 +3248,16 @@ S: Maintained F: drivers/net/ethernet/freescale/ucc_geth* FREESCALE QUICC ENGINE UCC UART DRIVER -M: Timur Tabi +M: Timur Tabi L: linuxppc-dev@lists.ozlabs.org -S: Supported +S: Maintained F: drivers/tty/serial/ucc_uart.c FREESCALE SOC SOUND DRIVERS -M: Timur Tabi +M: Timur Tabi L: alsa-devel@alsa-project.org (moderated for non-subscribers) L: linuxppc-dev@lists.ozlabs.org -S: Supported +S: Maintained F: sound/soc/fsl/fsl* F: sound/soc/fsl/mpc8610_hpcd.c @@ -4209,6 +4216,7 @@ M: Thomas Gleixner S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core F: kernel/irq/ +F: drivers/irqchip/ IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY) M: Benjamin Herrenschmidt @@ -5077,7 +5085,7 @@ S: Maintained F: drivers/media/radio/radio-mr800.c MSI LAPTOP SUPPORT -M: "Lee, Chun-Yi" +M: "Lee, Chun-Yi" L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/msi-laptop.c @@ -5507,8 +5515,7 @@ M: Benoît Cousson M: Paul Walmsley L: linux-omap@vger.kernel.org S: Maintained -F: arch/arm/mach-omap2/omap_hwmod.c -F: arch/arm/plat-omap/include/plat/omap_hwmod.h +F: arch/arm/mach-omap2/omap_hwmod.* OMAP HWMOD DATA FOR OMAP4-BASED DEVICES M: Benoît Cousson @@ -6579,7 +6586,7 @@ F: drivers/media/platform/s3c-camif/ F: include/media/s3c_camif.h SERIAL DRIVERS -M: Alan Cox +M: Greg Kroah-Hartman L: linux-serial@vger.kernel.org S: Maintained F: drivers/tty/serial @@ -7334,7 +7341,7 @@ S: Odd Fixes F: drivers/staging/speakup/ STAGING - TI DSP BRIDGE DRIVERS -M: Omar Ramirez Luna +M: Omar Ramirez Luna S: Odd Fixes F: drivers/staging/tidspbridge/ @@ -8526,7 +8533,7 @@ F: Documentation/x86/ F: arch/x86/ X86 PLATFORM DRIVERS -M: Matthew Garrett +M: Matthew Garrett L: platform-driver-x86@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git S: Maintained diff --git a/trunk/Makefile b/trunk/Makefile index a1667c4bcce5..2d3c92c774fb 100644 --- a/trunk/Makefile +++ b/trunk/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 8 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc5 NAME = Terrified Chipmunk # *DOCUMENTATION* @@ -169,7 +169,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ -e s/arm.*/arm/ -e s/sa110/arm/ \ -e s/s390x/s390/ -e s/parisc64/parisc/ \ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ - -e s/sh[234].*/sh/ ) + -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ ) # Cross compiling and selecting different set of gcc/bin-utils # --------------------------------------------------------------------------- diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig index eb9fc2f8acf1..c2950f3e678e 100644 --- a/trunk/arch/arm/Kconfig +++ b/trunk/arch/arm/Kconfig @@ -344,10 +344,10 @@ config ARCH_BCM2835 select ARM_ERRATA_411920 select ARM_TIMER_SP804 select CLKDEV_LOOKUP + select CLKSRC_OF select COMMON_CLK select CPU_V6 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select MULTI_IRQ_HANDLER select PINCTRL select PINCTRL_BCM2835 @@ -645,7 +645,6 @@ config ARCH_TEGRA select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 @@ -745,7 +744,6 @@ config ARCH_S3C24XX select ARCH_HAS_CPUFREQ select ARCH_USES_GETTIMEOFFSET select CLKDEV_LOOKUP - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -788,7 +786,6 @@ config ARCH_S5P64X0 select CLKSRC_MMIO select CPU_V6 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -803,7 +800,6 @@ config ARCH_S5PC100 select ARCH_USES_GETTIMEOFFSET select CLKDEV_LOOKUP select CPU_V7 - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -821,7 +817,6 @@ config ARCH_S5PV210 select CLKSRC_MMIO select CPU_V7 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -839,7 +834,6 @@ config ARCH_EXYNOS select CLKDEV_LOOKUP select CPU_V7 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -874,7 +868,6 @@ config ARCH_U300 select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_TCM select SPARSE_IRQ help @@ -958,7 +951,6 @@ config ARCH_VT8500_SINGLE select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select MULTI_IRQ_HANDLER select SPARSE_IRQ diff --git a/trunk/arch/arm/Kconfig.debug b/trunk/arch/arm/Kconfig.debug index 661030d6bc6c..1dceb8e31618 100644 --- a/trunk/arch/arm/Kconfig.debug +++ b/trunk/arch/arm/Kconfig.debug @@ -219,12 +219,12 @@ choice Say Y here if you want kernel low-level debugging support on i.MX51. - config DEBUG_IMX50_IMX53_UART - bool "i.MX50 and i.MX53 Debug UART" - depends on SOC_IMX50 || SOC_IMX53 + config DEBUG_IMX53_UART + bool "i.MX53 Debug UART" + depends on SOC_IMX53 help Say Y here if you want kernel low-level debugging support - on i.MX50 or i.MX53. + on i.MX53. config DEBUG_IMX6Q_UART bool "i.MX6Q Debug UART" @@ -497,7 +497,7 @@ config DEBUG_LL_INCLUDE DEBUG_IMX21_IMX27_UART || \ DEBUG_IMX31_IMX35_UART || \ DEBUG_IMX51_UART || \ - DEBUG_IMX50_IMX53_UART ||\ + DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/mvebu.S" if DEBUG_MVEBU_UART diff --git a/trunk/arch/arm/boot/compressed/decompress.c b/trunk/arch/arm/boot/compressed/decompress.c index 9deb56a702ce..24b0475cb8bf 100644 --- a/trunk/arch/arm/boot/compressed/decompress.c +++ b/trunk/arch/arm/boot/compressed/decompress.c @@ -13,8 +13,6 @@ extern void error(char *); #define STATIC static #define STATIC_RW_DATA /* non-static please */ -#define ARCH_HAS_DECOMP_WDOG - /* Diagnostic functions */ #ifdef DEBUG # define Assert(cond,msg) {if(!(cond)) error(msg);} diff --git a/trunk/arch/arm/boot/dts/Makefile b/trunk/arch/arm/boot/dts/Makefile index e44da40d984f..5ebb44fe826a 100644 --- a/trunk/arch/arm/boot/dts/Makefile +++ b/trunk/arch/arm/boot/dts/Makefile @@ -155,6 +155,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb targets += dtbs +targets += $(dtb-y) endif # *.dtb used to be generated in the directory above. Clean out the diff --git a/trunk/arch/arm/boot/dts/armada-370-db.dts b/trunk/arch/arm/boot/dts/armada-370-db.dts index 00044026ef1f..9b82facb2561 100644 --- a/trunk/arch/arm/boot/dts/armada-370-db.dts +++ b/trunk/arch/arm/boot/dts/armada-370-db.dts @@ -26,7 +26,7 @@ memory { device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ + reg = <0x00000000 0x40000000>; /* 1 GB */ }; soc { diff --git a/trunk/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/trunk/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 271855a6e224..e041f42ed711 100644 --- a/trunk/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/trunk/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -50,27 +50,25 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <17>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>; + interrupts = <87>, <88>, <89>; }; }; }; diff --git a/trunk/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/trunk/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 1c1937dbce73..9e23bd8c9536 100644 --- a/trunk/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/trunk/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -51,39 +51,36 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>, <23>; + interrupts = <87>, <88>, <89>, <90>; }; gpio2: gpio@d0018180 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018180 0x40>, - <0xd0018870 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <24>; + interrupts = <91>; }; ethernet@d0034000 { diff --git a/trunk/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/trunk/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 4905cf3a5ef8..965966110e38 100644 --- a/trunk/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/trunk/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -66,39 +66,36 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018100 0x40>, - <0xd0018800 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; + interrupts = <82>, <83>, <84>, <85>; }; gpio1: gpio@d0018140 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018140 0x40>, - <0xd0018840 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <20>, <21>, <22>, <23>; + interrupts = <87>, <88>, <89>, <90>; }; gpio2: gpio@d0018180 { - compatible = "marvell,armadaxp-gpio"; - reg = <0xd0018180 0x40>, - <0xd0018870 0x30>; + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <24>; + interrupts = <91>; }; ethernet@d0034000 { diff --git a/trunk/arch/arm/boot/dts/at91rm9200.dtsi b/trunk/arch/arm/boot/dts/at91rm9200.dtsi index e154f242c680..222047f1ece9 100644 --- a/trunk/arch/arm/boot/dts/at91rm9200.dtsi +++ b/trunk/arch/arm/boot/dts/at91rm9200.dtsi @@ -336,8 +336,8 @@ i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ + gpios = <&pioA 25 0 /* sda */ + &pioA 26 0 /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/trunk/arch/arm/boot/dts/at91sam9260.dtsi b/trunk/arch/arm/boot/dts/at91sam9260.dtsi index 68bccf41a2c6..cb7bcc51608d 100644 --- a/trunk/arch/arm/boot/dts/at91sam9260.dtsi +++ b/trunk/arch/arm/boot/dts/at91sam9260.dtsi @@ -306,6 +306,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0 /* PB17 periph A */ + 1 18 0x1 0x0>; /* PB18 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 19 0x1 0x0 /* PB19 periph A */ + 1 20 0x1 0x0 /* PB20 periph A */ + 1 21 0x1 0x0>; /* PB21 periph A */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -450,6 +466,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; interrupts = <14 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; diff --git a/trunk/arch/arm/boot/dts/at91sam9263.dtsi b/trunk/arch/arm/boot/dts/at91sam9263.dtsi index 32ec62cf5385..271d4de026e9 100644 --- a/trunk/arch/arm/boot/dts/at91sam9263.dtsi +++ b/trunk/arch/arm/boot/dts/at91sam9263.dtsi @@ -271,6 +271,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 0 0x2 0x0 /* PB0 periph B */ + 1 1 0x2 0x0 /* PB1 periph B */ + 1 2 0x2 0x0>; /* PB2 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 3 0x2 0x0 /* PB3 periph B */ + 1 4 0x2 0x0 /* PB4 periph B */ + 1 5 0x2 0x0>; /* PB5 periph B */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 8 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0 /* PB10 periph A */ + 1 11 0x1 0x0>; /* PB11 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -368,6 +400,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; @@ -375,6 +409,8 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <17 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; }; diff --git a/trunk/arch/arm/boot/dts/at91sam9g45.dtsi b/trunk/arch/arm/boot/dts/at91sam9g45.dtsi index 231858ffd850..6b1d4cab24c2 100644 --- a/trunk/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/trunk/arch/arm/boot/dts/at91sam9g45.dtsi @@ -290,6 +290,38 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <3 0 0x1 0x0 /* PD0 periph A */ + 3 1 0x1 0x0 /* PD1 periph A */ + 3 2 0x1 0x0>; /* PD2 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <3 3 0x1 0x0 /* PD3 periph A */ + 3 4 0x1 0x0 /* PD4 periph A */ + 3 5 0x1 0x0>; /* PD5 periph A */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <3 10 0x1 0x0 /* PD10 periph A */ + 3 11 0x1 0x0 /* PD11 periph A */ + 3 12 0x1 0x0>; /* PD12 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <3 13 0x1 0x0 /* PD13 periph A */ + 3 14 0x1 0x0 /* PD14 periph A */ + 3 15 0x1 0x0>; /* PD15 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -425,6 +457,8 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; }; @@ -432,6 +466,8 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; interrupts = <17 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; }; diff --git a/trunk/arch/arm/boot/dts/at91sam9n12.dtsi b/trunk/arch/arm/boot/dts/at91sam9n12.dtsi index e9efb34f4379..80e29c605d4e 100644 --- a/trunk/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/trunk/arch/arm/boot/dts/at91sam9n12.dtsi @@ -28,6 +28,7 @@ tcb1 = &tcb1; i2c0 = &i2c0; i2c1 = &i2c1; + ssc0 = &ssc0; }; cpus { cpu@0 { @@ -244,6 +245,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -294,6 +311,15 @@ status = "disabled"; }; + ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; diff --git a/trunk/arch/arm/boot/dts/at91sam9x5.dtsi b/trunk/arch/arm/boot/dts/at91sam9x5.dtsi index 40ac3a4eb1ab..8ecca6948d81 100644 --- a/trunk/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/trunk/arch/arm/boot/dts/at91sam9x5.dtsi @@ -88,13 +88,6 @@ interrupts = <1 4 7>; }; - ssc0: ssc@f0010000 { - compatible = "atmel,at91sam9g45-ssc"; - reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; - status = "disabled"; - }; - tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; @@ -150,6 +143,11 @@ atmel,pins = <0 3 0x1 0x0>; /* PA3 periph A */ }; + + pinctrl_usart0_sck: usart0_sck-0 { + atmel,pins = + <0 4 0x1 0x0>; /* PA4 periph A */ + }; }; usart1 { @@ -161,12 +159,17 @@ pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 27 0x3 0x0>; /* PC27 periph C */ + <2 27 0x3 0x0>; /* PC27 periph C */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 28 0x3 0x0>; /* PC28 periph C */ + <2 28 0x3 0x0>; /* PC28 periph C */ + }; + + pinctrl_usart1_sck: usart1_sck-0 { + atmel,pins = + <2 28 0x3 0x0>; /* PC29 periph C */ }; }; @@ -179,46 +182,56 @@ pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <0 0 0x2 0x0>; /* PB0 periph B */ + <1 0 0x2 0x0>; /* PB0 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <0 1 0x2 0x0>; /* PB1 periph B */ + <1 1 0x2 0x0>; /* PB1 periph B */ + }; + + pinctrl_usart2_sck: usart2_sck-0 { + atmel,pins = + <1 2 0x2 0x0>; /* PB2 periph B */ }; }; usart3 { pinctrl_uart3: usart3-0 { atmel,pins = - <3 23 0x2 0x1 /* PC22 periph B with pullup */ - 3 23 0x2 0x0>; /* PC23 periph B */ + <2 23 0x2 0x1 /* PC22 periph B with pullup */ + 2 23 0x2 0x0>; /* PC23 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <3 24 0x2 0x0>; /* PC24 periph B */ + <2 24 0x2 0x0>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <3 25 0x2 0x0>; /* PC25 periph B */ + <2 25 0x2 0x0>; /* PC25 periph B */ + }; + + pinctrl_usart3_sck: usart3_sck-0 { + atmel,pins = + <2 26 0x2 0x0>; /* PC26 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <3 8 0x3 0x0 /* PC8 periph C */ - 3 9 0x3 0x1>; /* PC9 periph C with pullup */ + <2 8 0x3 0x0 /* PC8 periph C */ + 2 9 0x3 0x1>; /* PC9 periph C with pullup */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <3 16 0x3 0x0 /* PC16 periph C */ - 3 17 0x3 0x1>; /* PC17 periph C with pullup */ + <2 16 0x3 0x0 /* PC16 periph C */ + 2 17 0x3 0x1>; /* PC17 periph C with pullup */ }; }; @@ -247,14 +260,14 @@ pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { atmel,pins = - <1 8 0x1 0x0 /* PA8 periph A */ - 1 11 0x1 0x0 /* PA11 periph A */ - 1 12 0x1 0x0 /* PA12 periph A */ - 1 13 0x1 0x0 /* PA13 periph A */ - 1 14 0x1 0x0 /* PA14 periph A */ - 1 15 0x1 0x0 /* PA15 periph A */ - 1 16 0x1 0x0 /* PA16 periph A */ - 1 17 0x1 0x0>; /* PA17 periph A */ + <1 8 0x1 0x0 /* PB8 periph A */ + 1 11 0x1 0x0 /* PB11 periph A */ + 1 12 0x1 0x0 /* PB12 periph A */ + 1 13 0x1 0x0 /* PB13 periph A */ + 1 14 0x1 0x0 /* PB14 periph A */ + 1 15 0x1 0x0 /* PB15 periph A */ + 1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0>; /* PB17 periph A */ }; }; @@ -290,6 +303,22 @@ }; }; + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0>; /* PA26 periph B */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; @@ -333,6 +362,15 @@ }; }; + ssc0: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disabled"; + }; + mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; diff --git a/trunk/arch/arm/boot/dts/cros5250-common.dtsi b/trunk/arch/arm/boot/dts/cros5250-common.dtsi index fddd17417433..46c098017036 100644 --- a/trunk/arch/arm/boot/dts/cros5250-common.dtsi +++ b/trunk/arch/arm/boot/dts/cros5250-common.dtsi @@ -96,8 +96,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -120,8 +120,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -141,8 +141,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; diff --git a/trunk/arch/arm/boot/dts/dove-cubox.dts b/trunk/arch/arm/boot/dts/dove-cubox.dts index fed7d3f9f431..cdee96fca6e2 100644 --- a/trunk/arch/arm/boot/dts/dove-cubox.dts +++ b/trunk/arch/arm/boot/dts/dove-cubox.dts @@ -26,10 +26,15 @@ }; &uart0 { status = "okay"; }; -&sdio0 { status = "okay"; }; &sata0 { status = "okay"; }; &i2c0 { status = "okay"; }; +&sdio0 { + status = "okay"; + /* sdio0 card detect is connected to wrong pin on CuBox */ + cd-gpios = <&gpio0 12 1>; +}; + &spi0 { status = "okay"; @@ -42,9 +47,14 @@ }; &pinctrl { - pinctrl-0 = <&pmx_gpio_18>; + pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>; pinctrl-names = "default"; + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_gpio_18: pmx-gpio-18 { marvell,pins = "mpp18"; marvell,function = "gpio"; diff --git a/trunk/arch/arm/boot/dts/exynos5250-smdk5250.dts b/trunk/arch/arm/boot/dts/exynos5250-smdk5250.dts index 942d5761ca97..e05b18f3c33d 100644 --- a/trunk/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/trunk/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -115,8 +115,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; @@ -139,8 +139,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3 3>; - samsung,dw-mshc-ddr-timing = <1 2 3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; slot@0 { reg = <0>; diff --git a/trunk/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/trunk/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 9bc6785ad228..77d21abfcdf7 100644 --- a/trunk/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/trunk/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { chosen { @@ -6,6 +7,21 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0 + &pmx_ns2_sata0 &pmx_ns2_sata1>; + pinctrl-names = "default"; + + pmx_ns2_sata0: pmx-ns2-sata0 { + marvell,pins = "mpp21"; + marvell,function = "sata0"; + }; + pmx_ns2_sata1: pmx-ns2-sata1 { + marvell,pins = "mpp20"; + marvell,function = "sata1"; + }; + }; + serial@12000 { clock-frequency = <166666667>; status = "okay"; diff --git a/trunk/arch/arm/boot/dts/kirkwood.dtsi b/trunk/arch/arm/boot/dts/kirkwood.dtsi index 110d6cbb795b..d6ab442b7011 100644 --- a/trunk/arch/arm/boot/dts/kirkwood.dtsi +++ b/trunk/arch/arm/boot/dts/kirkwood.dtsi @@ -36,6 +36,7 @@ reg = <0x10100 0x40>; ngpios = <32>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <35>, <36>, <37>, <38>; }; @@ -46,6 +47,7 @@ reg = <0x10140 0x40>; ngpios = <18>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <39>, <40>, <41>; }; diff --git a/trunk/arch/arm/boot/dts/kizbox.dts b/trunk/arch/arm/boot/dts/kizbox.dts index e8814fe0e277..b4dc3ed9a3ec 100644 --- a/trunk/arch/arm/boot/dts/kizbox.dts +++ b/trunk/arch/arm/boot/dts/kizbox.dts @@ -48,6 +48,8 @@ macb0: ethernet@fffc4000 { phy-mode = "mii"; + pinctrl-0 = <&pinctrl_macb_rmii + &pinctrl_macb_rmii_mii_alt>; status = "okay"; }; diff --git a/trunk/arch/arm/boot/dts/sunxi.dtsi b/trunk/arch/arm/boot/dts/sunxi.dtsi index 8bbc2bfef221..8b36abea9f2e 100644 --- a/trunk/arch/arm/boot/dts/sunxi.dtsi +++ b/trunk/arch/arm/boot/dts/sunxi.dtsi @@ -60,19 +60,21 @@ }; uart0: uart@01c28000 { - compatible = "ns8250"; + compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <1>; reg-shift = <2>; + reg-io-width = <4>; clock-frequency = <24000000>; status = "disabled"; }; uart1: uart@01c28400 { - compatible = "ns8250"; + compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <2>; reg-shift = <2>; + reg-io-width = <4>; clock-frequency = <24000000>; status = "disabled"; }; diff --git a/trunk/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/trunk/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 1fc405a9ecfb..cf8071ad22d5 100644 --- a/trunk/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/trunk/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -45,7 +45,6 @@ reg = <1>; }; -/* A7s disabled till big.LITTLE patches are available... cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -63,7 +62,6 @@ compatible = "arm,cortex-a7"; reg = <0x102>; }; -*/ }; memory@80000000 { diff --git a/trunk/arch/arm/common/Kconfig b/trunk/arch/arm/common/Kconfig index 45ceeb0e93e0..9353184d730d 100644 --- a/trunk/arch/arm/common/Kconfig +++ b/trunk/arch/arm/common/Kconfig @@ -1,26 +1,3 @@ -config ARM_GIC - bool - select IRQ_DOMAIN - select MULTI_IRQ_HANDLER - -config GIC_NON_BANKED - bool - -config ARM_VIC - bool - select IRQ_DOMAIN - select MULTI_IRQ_HANDLER - -config ARM_VIC_NR - int - default 4 if ARCH_S5PV210 - default 3 if ARCH_S5PC100 - default 2 - depends on ARM_VIC - help - The maximum number of VICs available in the system, for - power management. - config ICST bool diff --git a/trunk/arch/arm/common/Makefile b/trunk/arch/arm/common/Makefile index e8a4e58f1b82..dc8dd0de5c0f 100644 --- a/trunk/arch/arm/common/Makefile +++ b/trunk/arch/arm/common/Makefile @@ -2,8 +2,6 @@ # Makefile for the linux kernel. # -obj-$(CONFIG_ARM_GIC) += gic.o -obj-$(CONFIG_ARM_VIC) += vic.o obj-$(CONFIG_ICST) += icst.o obj-$(CONFIG_SA1111) += sa1111.o obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o diff --git a/trunk/arch/arm/configs/at91_dt_defconfig b/trunk/arch/arm/configs/at91_dt_defconfig index b175577d7abb..1ea959019fcd 100644 --- a/trunk/arch/arm/configs/at91_dt_defconfig +++ b/trunk/arch/arm/configs/at91_dt_defconfig @@ -19,6 +19,7 @@ CONFIG_SOC_AT91SAM9260=y CONFIG_SOC_AT91SAM9263=y CONFIG_SOC_AT91SAM9G45=y CONFIG_SOC_AT91SAM9X5=y +CONFIG_SOC_AT91SAM9N12=y CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_TIMER_HZ=128 @@ -31,7 +32,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" +CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" CONFIG_KEXEC=y CONFIG_AUTO_ZRELADDR=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set diff --git a/trunk/arch/arm/configs/imx_v6_v7_defconfig b/trunk/arch/arm/configs/imx_v6_v7_defconfig index 69667133321f..6dddbf877b0c 100644 --- a/trunk/arch/arm/configs/imx_v6_v7_defconfig +++ b/trunk/arch/arm/configs/imx_v6_v7_defconfig @@ -32,7 +32,6 @@ CONFIG_MACH_PCM043=y CONFIG_MACH_MX35_3DS=y CONFIG_MACH_VPR200=y CONFIG_MACH_IMX51_DT=y -CONFIG_MACH_MX51_3DS=y CONFIG_MACH_EUKREA_CPUIMX51SD=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y diff --git a/trunk/arch/arm/include/asm/mach/irq.h b/trunk/arch/arm/include/asm/mach/irq.h index 15cb035309f7..18c883023339 100644 --- a/trunk/arch/arm/include/asm/mach/irq.h +++ b/trunk/arch/arm/include/asm/mach/irq.h @@ -22,6 +22,7 @@ extern int show_fiq_list(struct seq_file *, int); #ifdef CONFIG_MULTI_IRQ_HANDLER extern void (*handle_arch_irq)(struct pt_regs *); +extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); #endif /* diff --git a/trunk/arch/arm/include/debug/imx.S b/trunk/arch/arm/include/debug/imx.S index 0c4e17d4d359..c6f294cf18f0 100644 --- a/trunk/arch/arm/include/debug/imx.S +++ b/trunk/arch/arm/include/debug/imx.S @@ -34,7 +34,7 @@ #define UART_PADDR 0x43f90000 #elif defined (CONFIG_DEBUG_IMX51_UART) #define UART_PADDR 0x73fbc000 -#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART) +#elif defined (CONFIG_DEBUG_IMX53_UART) #define UART_PADDR 0x53fbc000 #elif defined (CONFIG_DEBUG_IMX6Q_UART) #define UART_PADDR IMX6Q_DEBUG_UART_BASE diff --git a/trunk/arch/arm/kernel/debug.S b/trunk/arch/arm/kernel/debug.S index 6809200c31fb..14f7c3b14632 100644 --- a/trunk/arch/arm/kernel/debug.S +++ b/trunk/arch/arm/kernel/debug.S @@ -100,12 +100,14 @@ ENTRY(printch) b 1b ENDPROC(printch) +#ifdef CONFIG_MMU ENTRY(debug_ll_addr) addruart r2, r3, ip str r2, [r0] str r3, [r1] mov pc, lr ENDPROC(debug_ll_addr) +#endif #else diff --git a/trunk/arch/arm/kernel/head.S b/trunk/arch/arm/kernel/head.S index 4eee351f4668..486a15ae9011 100644 --- a/trunk/arch/arm/kernel/head.S +++ b/trunk/arch/arm/kernel/head.S @@ -246,6 +246,7 @@ __create_page_tables: /* * Then map boot params address in r2 if specified. + * We map 2 sections in case the ATAGs/DTB crosses a section boundary. */ mov r0, r2, lsr #SECTION_SHIFT movs r0, r0, lsl #SECTION_SHIFT @@ -253,6 +254,8 @@ __create_page_tables: addne r3, r3, #PAGE_OFFSET addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) orrne r6, r7, r0 + strne r6, [r3], #1 << PMD_ORDER + addne r6, r6, #1 << SECTION_SHIFT strne r6, [r3] #ifdef CONFIG_DEBUG_LL @@ -331,7 +334,7 @@ ENTRY(secondary_startup) * as it has already been validated by the primary processor. */ #ifdef CONFIG_ARM_VIRT_EXT - bl __hyp_stub_install + bl __hyp_stub_install_secondary #endif safe_svcmode_maskall r9 diff --git a/trunk/arch/arm/kernel/hyp-stub.S b/trunk/arch/arm/kernel/hyp-stub.S index 65b2417aebce..1315c4ccfa56 100644 --- a/trunk/arch/arm/kernel/hyp-stub.S +++ b/trunk/arch/arm/kernel/hyp-stub.S @@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary) * immediately. */ compare_cpu_mode_with_primary r4, r5, r6, r7 - bxne lr + movne pc, lr /* * Once we have given up on one CPU, we do not try to install the @@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary) */ cmp r4, #HYP_MODE - bxne lr @ give up if the CPU is not in HYP mode + movne pc, lr @ give up if the CPU is not in HYP mode /* * Configure HSCTLR to set correct exception endianness/instruction set @@ -120,7 +120,8 @@ ENTRY(__hyp_stub_install_secondary) * Eventually, CPU-specific code might be needed -- assume not for now * * This code relies on the "eret" instruction to synchronize the - * various coprocessor accesses. + * various coprocessor accesses. This is done when we switch to SVC + * (see safe_svcmode_maskall). */ @ Now install the hypervisor stub: adr r7, __hyp_stub_vectors @@ -155,14 +156,7 @@ THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE 1: #endif - bic r7, r4, #MODE_MASK - orr r7, r7, #SVC_MODE -THUMB( orr r7, r7, #PSR_T_BIT ) - msr spsr_cxsf, r7 @ This is SPSR_hyp. - - __MSR_ELR_HYP(14) @ msr elr_hyp, lr - __ERET @ return, switching to SVC mode - @ The boot CPU mode is left in r4. + bx lr @ The boot CPU mode is left in r4. ENDPROC(__hyp_stub_install_secondary) __hyp_stub_do_trap: @@ -200,7 +194,7 @@ ENDPROC(__hyp_get_vectors) @ fall through ENTRY(__hyp_set_vectors) __HVC(0) - bx lr + mov pc, lr ENDPROC(__hyp_set_vectors) #ifndef ZIMAGE diff --git a/trunk/arch/arm/kernel/irq.c b/trunk/arch/arm/kernel/irq.c index 896165096d6a..8e4ef4c83a74 100644 --- a/trunk/arch/arm/kernel/irq.c +++ b/trunk/arch/arm/kernel/irq.c @@ -117,6 +117,16 @@ void __init init_IRQ(void) machine_desc->init_irq(); } +#ifdef CONFIG_MULTI_IRQ_HANDLER +void __init set_handle_irq(void (*handle_irq)(struct pt_regs *)) +{ + if (handle_arch_irq) + return; + + handle_arch_irq = handle_irq; +} +#endif + #ifdef CONFIG_SPARSE_IRQ int __init arch_probe_nr_irqs(void) { diff --git a/trunk/arch/arm/kernel/smp.c b/trunk/arch/arm/kernel/smp.c index 84f4cbf652e5..3fc96db2a4b6 100644 --- a/trunk/arch/arm/kernel/smp.c +++ b/trunk/arch/arm/kernel/smp.c @@ -416,7 +416,8 @@ static void (*smp_cross_call)(const struct cpumask *, unsigned int); void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int)) { - smp_cross_call = fn; + if (!smp_cross_call) + smp_cross_call = fn; } void arch_send_call_function_ipi_mask(const struct cpumask *mask) diff --git a/trunk/arch/arm/kernel/smp_twd.c b/trunk/arch/arm/kernel/smp_twd.c index 49f335d301ba..dc9bb0146665 100644 --- a/trunk/arch/arm/kernel/smp_twd.c +++ b/trunk/arch/arm/kernel/smp_twd.c @@ -24,7 +24,6 @@ #include #include -#include /* set up by the platform code */ static void __iomem *twd_base; diff --git a/trunk/arch/arm/mach-at91/at91rm9200_time.c b/trunk/arch/arm/mach-at91/at91rm9200_time.c index 180b3024bec3..2acdff4c1dfe 100644 --- a/trunk/arch/arm/mach-at91/at91rm9200_time.c +++ b/trunk/arch/arm/mach-at91/at91rm9200_time.c @@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ - clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); - clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); - clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&clkevt); + clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, + 2, AT91_ST_ALMV); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); diff --git a/trunk/arch/arm/mach-at91/include/mach/uncompress.h b/trunk/arch/arm/mach-at91/include/mach/uncompress.h index 97ad68a826f8..5659f7c72120 100644 --- a/trunk/arch/arm/mach-at91/include/mach/uncompress.h +++ b/trunk/arch/arm/mach-at91/include/mach/uncompress.h @@ -196,6 +196,4 @@ static inline void flush(void) barrier(); } -#define arch_decomp_wdog() - #endif diff --git a/trunk/arch/arm/mach-at91/setup.c b/trunk/arch/arm/mach-at91/setup.c index 9ee866ce0478..4b678478cf95 100644 --- a/trunk/arch/arm/mach-at91/setup.c +++ b/trunk/arch/arm/mach-at91/setup.c @@ -105,6 +105,8 @@ static void __init soc_detect(u32 dbgu_base) switch (socid) { case ARCH_ID_AT91RM9200: at91_soc_initdata.type = AT91_SOC_RM9200; + if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE) + at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; at91_boot_soc = at91rm9200_soc; break; diff --git a/trunk/arch/arm/mach-bcm/Kconfig b/trunk/arch/arm/mach-bcm/Kconfig index 48705c10a0fe..bf02471d7e7c 100644 --- a/trunk/arch/arm/mach-bcm/Kconfig +++ b/trunk/arch/arm/mach-bcm/Kconfig @@ -7,7 +7,6 @@ config ARCH_BCM select ARM_GIC select CPU_V7 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select GENERIC_TIME select GPIO_BCM select SPARSE_IRQ diff --git a/trunk/arch/arm/mach-bcm/board_bcm.c b/trunk/arch/arm/mach-bcm/board_bcm.c index 3df68030cf68..f0f9abafad29 100644 --- a/trunk/arch/arm/mach-bcm/board_bcm.c +++ b/trunk/arch/arm/mach-bcm/board_bcm.c @@ -11,30 +11,19 @@ * GNU General Public License for more details. */ -#include #include #include #include #include +#include #include -#include - #include -static const struct of_device_id irq_match[] = { - {.compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - {} -}; - static void timer_init(void) { } -static void __init init_irq(void) -{ - of_irq_init(irq_match); -} static void __init board_init(void) { @@ -45,9 +34,8 @@ static void __init board_init(void) static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, }; DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor") - .init_irq = init_irq, + .init_irq = irqchip_init, .init_time = timer_init, .init_machine = board_init, .dt_compat = bcm11351_dt_compat, - .handle_irq = gic_handle_irq, MACHINE_END diff --git a/trunk/arch/arm/mach-bcm2835/bcm2835.c b/trunk/arch/arm/mach-bcm2835/bcm2835.c index 176d2d24782d..d615a61e902c 100644 --- a/trunk/arch/arm/mach-bcm2835/bcm2835.c +++ b/trunk/arch/arm/mach-bcm2835/bcm2835.c @@ -17,8 +17,8 @@ #include #include #include -#include #include +#include #include #include @@ -104,7 +104,7 @@ DT_MACHINE_START(BCM2835, "BCM2835") .init_irq = bcm2835_init_irq, .handle_irq = bcm2835_handle_irq, .init_machine = bcm2835_init, - .init_time = bcm2835_timer_init, + .init_time = clocksource_of_init, .restart = bcm2835_restart, .dt_compat = bcm2835_compat MACHINE_END diff --git a/trunk/arch/arm/mach-bcm2835/include/mach/uncompress.h b/trunk/arch/arm/mach-bcm2835/include/mach/uncompress.h index cc46dcc72377..bf86dca3bf71 100644 --- a/trunk/arch/arm/mach-bcm2835/include/mach/uncompress.h +++ b/trunk/arch/arm/mach-bcm2835/include/mach/uncompress.h @@ -42,4 +42,3 @@ static inline void flush(void) } #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/trunk/arch/arm/mach-clps711x/include/mach/uncompress.h b/trunk/arch/arm/mach-clps711x/include/mach/uncompress.h index 7b28d6a47690..5f02d06dc655 100644 --- a/trunk/arch/arm/mach-clps711x/include/mach/uncompress.h +++ b/trunk/arch/arm/mach-clps711x/include/mach/uncompress.h @@ -53,5 +53,3 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() - -#define arch_decomp_wdog() diff --git a/trunk/arch/arm/mach-cns3xxx/cns3420vb.c b/trunk/arch/arm/mach-cns3xxx/cns3420vb.c index 3c86f910b647..a71867e1d8d6 100644 --- a/trunk/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/trunk/arch/arm/mach-cns3xxx/cns3420vb.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include @@ -251,7 +250,6 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board") .map_io = cns3420_map_io, .init_irq = cns3xxx_init_irq, .init_time = cns3xxx_timer_init, - .handle_irq = gic_handle_irq, .init_machine = cns3420_init, .restart = cns3xxx_restart, MACHINE_END diff --git a/trunk/arch/arm/mach-cns3xxx/core.c b/trunk/arch/arm/mach-cns3xxx/core.c index 1754f8f4f34c..e698f26cc0cb 100644 --- a/trunk/arch/arm/mach-cns3xxx/core.c +++ b/trunk/arch/arm/mach-cns3xxx/core.c @@ -12,10 +12,10 @@ #include #include #include +#include #include #include #include -#include #include #include #include "core.h" @@ -134,7 +134,6 @@ static int cns3xxx_timer_set_next_event(unsigned long evt, static struct clock_event_device cns3xxx_tmr1_clockevent = { .name = "cns3xxx timer1", - .shift = 8, .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = cns3xxx_timer_set_mode, .set_next_event = cns3xxx_timer_set_next_event, @@ -145,15 +144,9 @@ static struct clock_event_device cns3xxx_tmr1_clockevent = { static void __init cns3xxx_clockevents_init(unsigned int timer_irq) { cns3xxx_tmr1_clockevent.irq = timer_irq; - cns3xxx_tmr1_clockevent.mult = - div_sc((cns3xxx_cpu_clock() >> 3) * 1000000, NSEC_PER_SEC, - cns3xxx_tmr1_clockevent.shift); - cns3xxx_tmr1_clockevent.max_delta_ns = - clockevent_delta2ns(0xffffffff, &cns3xxx_tmr1_clockevent); - cns3xxx_tmr1_clockevent.min_delta_ns = - clockevent_delta2ns(0xf, &cns3xxx_tmr1_clockevent); - - clockevents_register_device(&cns3xxx_tmr1_clockevent); + clockevents_config_and_register(&cns3xxx_tmr1_clockevent, + (cns3xxx_cpu_clock() >> 3) * 1000000, + 0xf, 0xffffffff); } /* diff --git a/trunk/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/trunk/arch/arm/mach-cns3xxx/include/mach/uncompress.h index a91b6058ab4f..7a030b99df84 100644 --- a/trunk/arch/arm/mach-cns3xxx/include/mach/uncompress.h +++ b/trunk/arch/arm/mach-cns3xxx/include/mach/uncompress.h @@ -51,4 +51,3 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/trunk/arch/arm/mach-davinci/include/mach/uncompress.h b/trunk/arch/arm/mach-davinci/include/mach/uncompress.h index 3a0ff905a69b..f49c2916aa3a 100644 --- a/trunk/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/trunk/arch/arm/mach-davinci/include/mach/uncompress.h @@ -101,4 +101,3 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } #define arch_decomp_setup() __arch_decomp_setup(arch_id) -#define arch_decomp_wdog() diff --git a/trunk/arch/arm/mach-dove/common.c b/trunk/arch/arm/mach-dove/common.c index 0c7911b3e155..ea84c535a110 100644 --- a/trunk/arch/arm/mach-dove/common.c +++ b/trunk/arch/arm/mach-dove/common.c @@ -8,35 +8,24 @@ * warranty of any kind, whether express or implied. */ -#include -#include -#include -#include -#include #include #include -#include -#include +#include +#include #include #include -#include -#include -#include +#include +#include +#include #include +#include #include #include -#include -#include -#include #include -#include -#include -#include -#include -#include -#include +#include #include -#include +#include +#include #include "common.h" /***************************************************************************** diff --git a/trunk/arch/arm/mach-dove/include/mach/uncompress.h b/trunk/arch/arm/mach-dove/include/mach/uncompress.h index 2c5cdd7a3eed..5c8ae9b9d39a 100644 --- a/trunk/arch/arm/mach-dove/include/mach/uncompress.h +++ b/trunk/arch/arm/mach-dove/include/mach/uncompress.h @@ -34,4 +34,3 @@ static void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/trunk/arch/arm/mach-ebsa110/include/mach/uncompress.h b/trunk/arch/arm/mach-ebsa110/include/mach/uncompress.h index 32041509fbf8..ab64bea69c72 100644 --- a/trunk/arch/arm/mach-ebsa110/include/mach/uncompress.h +++ b/trunk/arch/arm/mach-ebsa110/include/mach/uncompress.h @@ -42,4 +42,3 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/trunk/arch/arm/mach-ep93xx/adssphere.c b/trunk/arch/arm/mach-ep93xx/adssphere.c index 82d9c788535a..bda6c3a5c923 100644 --- a/trunk/arch/arm/mach-ep93xx/adssphere.c +++ b/trunk/arch/arm/mach-ep93xx/adssphere.c @@ -17,7 +17,6 @@ #include -#include #include #include @@ -39,7 +38,6 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = adssphere_init_machine, .init_late = ep93xx_init_late, diff --git a/trunk/arch/arm/mach-ep93xx/core.c b/trunk/arch/arm/mach-ep93xx/core.c index ee27b4b0ab07..c49ed3dc1aea 100644 --- a/trunk/arch/arm/mach-ep93xx/core.c +++ b/trunk/arch/arm/mach-ep93xx/core.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -44,8 +45,6 @@ #include #include -#include - #include "soc.h" /************************************************************************* diff --git a/trunk/arch/arm/mach-ep93xx/edb93xx.c b/trunk/arch/arm/mach-ep93xx/edb93xx.c index ac260519c9e9..27b14ae92c7e 100644 --- a/trunk/arch/arm/mach-ep93xx/edb93xx.c +++ b/trunk/arch/arm/mach-ep93xx/edb93xx.c @@ -39,7 +39,6 @@ #include #include -#include #include #include @@ -276,7 +275,6 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, @@ -290,7 +288,6 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, @@ -304,7 +301,6 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, @@ -318,7 +314,6 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, @@ -332,7 +327,6 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, @@ -346,7 +340,6 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, @@ -360,7 +353,6 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, @@ -374,7 +366,6 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, diff --git a/trunk/arch/arm/mach-ep93xx/gesbc9312.c b/trunk/arch/arm/mach-ep93xx/gesbc9312.c index 76c50f42bd71..0cca5b183309 100644 --- a/trunk/arch/arm/mach-ep93xx/gesbc9312.c +++ b/trunk/arch/arm/mach-ep93xx/gesbc9312.c @@ -17,7 +17,6 @@ #include -#include #include #include @@ -39,7 +38,6 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = gesbc9312_init_machine, .init_late = ep93xx_init_late, diff --git a/trunk/arch/arm/mach-ep93xx/include/mach/uncompress.h b/trunk/arch/arm/mach-ep93xx/include/mach/uncompress.h index d64274fc5760..d2afb4dd82ab 100644 --- a/trunk/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/trunk/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -86,5 +86,3 @@ static void arch_decomp_setup(void) { ethernet_reset(); } - -#define arch_decomp_wdog() diff --git a/trunk/arch/arm/mach-ep93xx/micro9.c b/trunk/arch/arm/mach-ep93xx/micro9.c index 777cd2170f8a..373583c29825 100644 --- a/trunk/arch/arm/mach-ep93xx/micro9.c +++ b/trunk/arch/arm/mach-ep93xx/micro9.c @@ -18,7 +18,6 @@ #include -#include #include #include @@ -82,7 +81,6 @@ MACHINE_START(MICRO9, "Contec Micro9-High") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = micro9_init_machine, .init_late = ep93xx_init_late, @@ -96,7 +94,6 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = micro9_init_machine, .init_late = ep93xx_init_late, @@ -110,7 +107,6 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = micro9_init_machine, .init_late = ep93xx_init_late, @@ -124,7 +120,6 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = micro9_init_machine, .init_late = ep93xx_init_late, diff --git a/trunk/arch/arm/mach-ep93xx/simone.c b/trunk/arch/arm/mach-ep93xx/simone.c index 6ff39ee2ad5d..36f22c1a31fe 100644 --- a/trunk/arch/arm/mach-ep93xx/simone.c +++ b/trunk/arch/arm/mach-ep93xx/simone.c @@ -25,7 +25,6 @@ #include #include -#include #include #include @@ -83,7 +82,6 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = simone_init_machine, .init_late = ep93xx_init_late, diff --git a/trunk/arch/arm/mach-ep93xx/snappercl15.c b/trunk/arch/arm/mach-ep93xx/snappercl15.c index 6434c07dbf96..aa86f86638dd 100644 --- a/trunk/arch/arm/mach-ep93xx/snappercl15.c +++ b/trunk/arch/arm/mach-ep93xx/snappercl15.c @@ -31,7 +31,6 @@ #include #include -#include #include #include @@ -176,7 +175,6 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = snappercl15_init_machine, .init_late = ep93xx_init_late, diff --git a/trunk/arch/arm/mach-ep93xx/ts72xx.c b/trunk/arch/arm/mach-ep93xx/ts72xx.c index e4fa0d3760a5..61f4b5dc4d7d 100644 --- a/trunk/arch/arm/mach-ep93xx/ts72xx.c +++ b/trunk/arch/arm/mach-ep93xx/ts72xx.c @@ -22,7 +22,6 @@ #include -#include #include #include #include @@ -246,7 +245,6 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") .atag_offset = 0x100, .map_io = ts72xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = ts72xx_init_machine, .init_late = ep93xx_init_late, diff --git a/trunk/arch/arm/mach-ep93xx/vision_ep9307.c b/trunk/arch/arm/mach-ep93xx/vision_ep9307.c index 8610ba293991..605956fd07a2 100644 --- a/trunk/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/trunk/arch/arm/mach-ep93xx/vision_ep9307.c @@ -34,7 +34,6 @@ #include #include -#include #include #include #include @@ -364,7 +363,6 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") .atag_offset = 0x100, .map_io = vision_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, .init_time = ep93xx_timer_init, .init_machine = vision_init_machine, .init_late = ep93xx_init_late, diff --git a/trunk/arch/arm/mach-exynos/common.c b/trunk/arch/arm/mach-exynos/common.c index 1a89824a5f78..9ce3e54a77c4 100644 --- a/trunk/arch/arm/mach-exynos/common.c +++ b/trunk/arch/arm/mach-exynos/common.c @@ -22,12 +22,13 @@ #include #include #include +#include #include +#include #include #include #include -#include #include #include #include @@ -35,7 +36,6 @@ #include #include #include -#include #include #include @@ -644,8 +644,6 @@ static int __init combiner_of_init(struct device_node *np, } static const struct of_device_id exynos_dt_irq_match[] = { - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, }, { .compatible = "samsung,exynos4210-combiner", .data = combiner_of_init, }, {}, @@ -661,8 +659,10 @@ void __init exynos4_init_irq(void) if (!of_have_populated_dt()) gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL); #ifdef CONFIG_OF - else + else { + irqchip_init(); of_irq_init(exynos_dt_irq_match); + } #endif if (!of_have_populated_dt()) @@ -679,6 +679,7 @@ void __init exynos4_init_irq(void) void __init exynos5_init_irq(void) { #ifdef CONFIG_OF + irqchip_init(); of_irq_init(exynos_dt_irq_match); #endif /* diff --git a/trunk/arch/arm/mach-exynos/common.h b/trunk/arch/arm/mach-exynos/common.h index 12f2f1117e99..feefc86293c2 100644 --- a/trunk/arch/arm/mach-exynos/common.h +++ b/trunk/arch/arm/mach-exynos/common.h @@ -64,4 +64,24 @@ extern struct smp_operations exynos_smp_ops; extern void exynos_cpu_die(unsigned int cpu); +/* PMU(Power Management Unit) support */ + +#define PMU_TABLE_END NULL + +enum sys_powerdown { + SYS_AFTR, + SYS_LPA, + SYS_SLEEP, + NUM_SYS_POWERDOWN, +}; + +extern unsigned long l2x0_regs_phys; +struct exynos_pmu_conf { + void __iomem *reg; + unsigned int val[NUM_SYS_POWERDOWN]; +}; + +extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); +extern void s3c_cpu_resume(void); + #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */ diff --git a/trunk/arch/arm/mach-exynos/cpuidle.c b/trunk/arch/arm/mach-exynos/cpuidle.c index 050924152776..fcfe0251aa3e 100644 --- a/trunk/arch/arm/mach-exynos/cpuidle.c +++ b/trunk/arch/arm/mach-exynos/cpuidle.c @@ -23,10 +23,11 @@ #include #include #include -#include #include +#include "common.h" + #define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \ S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ (S5P_VA_SYSRAM + 0x24) : S5P_INFORM0)) diff --git a/trunk/arch/arm/mach-exynos/dev-audio.c b/trunk/arch/arm/mach-exynos/dev-audio.c index 9d1a60951d7b..c662c89794b2 100644 --- a/trunk/arch/arm/mach-exynos/dev-audio.c +++ b/trunk/arch/arm/mach-exynos/dev-audio.c @@ -21,7 +21,8 @@ #include #include #include -#include + +#define EXYNOS4_AUDSS_INT_MEM (0x03000000) static int exynos4_cfg_i2s(struct platform_device *pdev) { diff --git a/trunk/arch/arm/mach-exynos/include/mach/pmu.h b/trunk/arch/arm/mach-exynos/include/mach/pmu.h deleted file mode 100644 index 7c27c2d4bf44..000000000000 --- a/trunk/arch/arm/mach-exynos/include/mach/pmu.h +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/pmu.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS4210 - PMU(Power Management Unit) support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PMU_H -#define __ASM_ARCH_PMU_H __FILE__ - -#define PMU_TABLE_END NULL - -enum sys_powerdown { - SYS_AFTR, - SYS_LPA, - SYS_SLEEP, - NUM_SYS_POWERDOWN, -}; - -extern unsigned long l2x0_regs_phys; -struct exynos_pmu_conf { - void __iomem *reg; - unsigned int val[NUM_SYS_POWERDOWN]; -}; - -extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); -extern void s3c_cpu_resume(void); - -#endif /* __ASM_ARCH_PMU_H */ diff --git a/trunk/arch/arm/mach-exynos/include/mach/regs-audss.h b/trunk/arch/arm/mach-exynos/include/mach/regs-audss.h deleted file mode 100644 index ca5a8b64218a..000000000000 --- a/trunk/arch/arm/mach-exynos/include/mach/regs-audss.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-exynos4/include/mach/regs-audss.h - * - * Copyright (c) 2011 Samsung Electronics - * http://www.samsung.com - * - * Exynos4 Audio SubSystem clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_REGS_AUDSS_H -#define __PLAT_REGS_AUDSS_H __FILE__ - -#define EXYNOS4_AUDSS_INT_MEM (0x03000000) - -#endif /* _PLAT_REGS_AUDSS_H */ diff --git a/trunk/arch/arm/mach-exynos/include/mach/regs-irq.h b/trunk/arch/arm/mach-exynos/include/mach/regs-irq.h index 9c7b4bfd546f..f2b50506b9f6 100644 --- a/trunk/arch/arm/mach-exynos/include/mach/regs-irq.h +++ b/trunk/arch/arm/mach-exynos/include/mach/regs-irq.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_REGS_IRQ_H #define __ASM_ARCH_REGS_IRQ_H __FILE__ -#include +#include #include #endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/trunk/arch/arm/mach-exynos/mach-armlex4210.c b/trunk/arch/arm/mach-exynos/mach-armlex4210.c index 2f18130d0d10..685f29173afa 100644 --- a/trunk/arch/arm/mach-exynos/mach-armlex4210.c +++ b/trunk/arch/arm/mach-exynos/mach-armlex4210.c @@ -16,7 +16,6 @@ #include #include -#include #include #include @@ -201,7 +200,6 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210") .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = armlex4210_map_io, - .handle_irq = gic_handle_irq, .init_machine = armlex4210_machine_init, .init_late = exynos_init_late, .init_time = exynos4_timer_init, diff --git a/trunk/arch/arm/mach-exynos/mach-exynos4-dt.c b/trunk/arch/arm/mach-exynos/mach-exynos4-dt.c index 160030168b19..112d10e53d20 100644 --- a/trunk/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/trunk/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -15,7 +15,6 @@ #include #include -#include #include #include @@ -107,7 +106,6 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = exynos4_dt_map_io, - .handle_irq = gic_handle_irq, .init_machine = exynos4_dt_machine_init, .init_late = exynos_init_late, .init_time = exynos4_timer_init, diff --git a/trunk/arch/arm/mach-exynos/mach-exynos5-dt.c b/trunk/arch/arm/mach-exynos/mach-exynos5-dt.c index 4e074c67cc8b..0deeecffa3ae 100644 --- a/trunk/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/trunk/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -16,7 +16,6 @@ #include #include -#include #include #include @@ -179,7 +178,6 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") .init_irq = exynos5_init_irq, .smp = smp_ops(exynos_smp_ops), .map_io = exynos5_dt_map_io, - .handle_irq = gic_handle_irq, .init_machine = exynos5_dt_machine_init, .init_late = exynos_init_late, .init_time = exynos4_timer_init, diff --git a/trunk/arch/arm/mach-exynos/mach-nuri.c b/trunk/arch/arm/mach-exynos/mach-nuri.c index dccd1d16b836..b8b3fbf0bae7 100644 --- a/trunk/arch/arm/mach-exynos/mach-nuri.c +++ b/trunk/arch/arm/mach-exynos/mach-nuri.c @@ -39,7 +39,6 @@ #include #include -#include #include #include @@ -1379,7 +1378,6 @@ MACHINE_START(NURI, "NURI") .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = nuri_map_io, - .handle_irq = gic_handle_irq, .init_machine = nuri_machine_init, .init_late = exynos_init_late, .init_time = exynos4_timer_init, diff --git a/trunk/arch/arm/mach-exynos/mach-origen.c b/trunk/arch/arm/mach-exynos/mach-origen.c index 4e1156324562..579d2d171daa 100644 --- a/trunk/arch/arm/mach-exynos/mach-origen.c +++ b/trunk/arch/arm/mach-exynos/mach-origen.c @@ -29,7 +29,6 @@ #include #include -#include #include #include