diff --git a/[refs] b/[refs]
index 603cee18fa45..01f6082f8774 100644
--- a/[refs]
+++ b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 4fc5e65cdbf736a5311b07aa54a916ccaa91ab5f
+refs/heads/master: be944f1e79063e4f27b46c74f10c86b2387afa9f
diff --git a/trunk/arch/arm/configs/imx_v4_v5_defconfig b/trunk/arch/arm/configs/imx_v4_v5_defconfig
index 6b31cb60daab..09a02963cf58 100644
--- a/trunk/arch/arm/configs/imx_v4_v5_defconfig
+++ b/trunk/arch/arm/configs/imx_v4_v5_defconfig
@@ -92,6 +92,7 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_TOUCHSCREEN_MC13783=m
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
@@ -107,7 +108,8 @@ CONFIG_SPI_SPIDEV=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
+CONFIG_HWMON=m
+CONFIG_SENSORS_MC13783_ADC=m
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_MC13XXX=y
diff --git a/trunk/arch/arm/configs/omap2plus_defconfig b/trunk/arch/arm/configs/omap2plus_defconfig
index d5f00d7eb075..9854ff4279e0 100644
--- a/trunk/arch/arm/configs/omap2plus_defconfig
+++ b/trunk/arch/arm/configs/omap2plus_defconfig
@@ -98,6 +98,7 @@ CONFIG_LIBERTAS_USB=m
 CONFIG_LIBERTAS_SDIO=m
 CONFIG_LIBERTAS_DEBUG=y
 CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC95XX=y
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
 CONFIG_USB_EPSON2888=y
@@ -175,6 +176,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_SUSPEND=y
 CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_LIBUSUAL=y
diff --git a/trunk/arch/arm/mach-exynos/Kconfig b/trunk/arch/arm/mach-exynos/Kconfig
index e81c35f936b5..366daff79458 100644
--- a/trunk/arch/arm/mach-exynos/Kconfig
+++ b/trunk/arch/arm/mach-exynos/Kconfig
@@ -200,6 +200,7 @@ config MACH_SMDKV310
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select SAMSUNG_DEV_BACKLIGHT
+	select EXYNOS_DEV_DRM
 	select EXYNOS4_DEV_AHCI
 	select SAMSUNG_DEV_KEYPAD
 	select EXYNOS4_DEV_DMA
@@ -252,6 +253,7 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
 	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DRM
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
@@ -288,6 +290,7 @@ config MACH_NURI
 	select S5P_DEV_USB_EHCI
 	select S5P_SETUP_MIPIPHY
 	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DRM
 	select EXYNOS4_SETUP_FIMC
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
@@ -322,6 +325,7 @@ config MACH_ORIGEN
 	select S5P_DEV_USB_EHCI
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
+	select EXYNOS_DEV_DRM
 	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_SETUP_FIMD0
@@ -342,6 +346,11 @@ config MACH_SMDK4212
 	select S3C_DEV_I2C7
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_MFC
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
diff --git a/trunk/arch/arm/mach-exynos/mach-nuri.c b/trunk/arch/arm/mach-exynos/mach-nuri.c
index ed90aef404c3..0fcbb2e162e3 100644
--- a/trunk/arch/arm/mach-exynos/mach-nuri.c
+++ b/trunk/arch/arm/mach-exynos/mach-nuri.c
@@ -25,6 +25,7 @@
 #include <linux/mmc/host.h>
 #include <linux/fb.h>
 #include <linux/pwm_backlight.h>
+#include <drm/exynos_drm.h>
 
 #include <video/platform_lcd.h>
 #include <media/m5mols.h>
@@ -213,6 +214,29 @@ static struct platform_device nuri_gpio_keys = {
 	},
 };
 
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+	.panel = {
+		.timing	= {
+			.xres		= 1024,
+			.yres		= 600,
+			.hsync_len	= 40,
+			.left_margin	= 79,
+			.right_margin	= 200,
+			.vsync_len	= 10,
+			.upper_margin	= 10,
+			.lower_margin	= 11,
+			.refresh	= 60,
+		},
+	},
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.default_win	= 3,
+	.bpp		= 32,
+};
+
+#else
 /* Frame Buffer */
 static struct s3c_fb_pd_win nuri_fb_win0 = {
 	.win_mode = {
@@ -239,6 +263,7 @@ static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
+#endif
 
 static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
 {
@@ -1302,6 +1327,9 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&cam_vdda_fixed_rdev,
 	&cam_8m_12v_fixed_rdev,
 	&exynos4_bus_devfreq,
+#ifdef CONFIG_DRM_EXYNOS
+	&exynos_device_drm,
+#endif
 };
 
 static void __init nuri_map_io(void)
@@ -1334,7 +1362,12 @@ static void __init nuri_machine_init(void)
 	i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
 	s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
 
+#ifdef CONFIG_DRM_EXYNOS
+	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+	exynos4_fimd0_gpio_setup_24bpp();
+#else
 	s5p_fimd0_set_platdata(&nuri_fb_pdata);
+#endif
 
 	nuri_camera_init();
 
diff --git a/trunk/arch/arm/mach-exynos/mach-origen.c b/trunk/arch/arm/mach-exynos/mach-origen.c
index 878d4c99142d..fe9627925846 100644
--- a/trunk/arch/arm/mach-exynos/mach-origen.c
+++ b/trunk/arch/arm/mach-exynos/mach-origen.c
@@ -45,6 +45,7 @@
 #include <mach/ohci.h>
 #include <mach/map.h>
 
+#include <drm/exynos_drm.h>
 #include "common.h"
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -583,6 +584,27 @@ static struct platform_device origen_lcd_hv070wsa = {
 	.dev.platform_data	= &origen_lcd_hv070wsa_data,
 };
 
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+	.panel	= {
+		.timing	= {
+			.left_margin	= 64,
+			.right_margin	= 16,
+			.upper_margin	= 64,
+			.lower_margin	= 16,
+			.hsync_len	= 48,
+			.vsync_len	= 3,
+			.xres		= 1024,
+			.yres		= 600,
+		},
+	},
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+				VIDCON1_INV_VCLK,
+	.default_win	= 0,
+	.bpp		= 32,
+};
+#else
 static struct s3c_fb_pd_win origen_fb_win0 = {
 	.win_mode = {
 		.left_margin	= 64,
@@ -596,6 +618,8 @@ static struct s3c_fb_pd_win origen_fb_win0 = {
 	},
 	.max_bpp		= 32,
 	.default_bpp		= 24,
+	.virtual_x		= 1024,
+	.virtual_y		= 2 * 600,
 };
 
 static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
@@ -605,9 +629,10 @@ static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
 				VIDCON1_INV_VCLK,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
+#endif
 
 /* Bluetooth rfkill gpio platform data */
-struct rfkill_gpio_platform_data origen_bt_pdata = {
+static struct rfkill_gpio_platform_data origen_bt_pdata = {
 	.reset_gpio	= EXYNOS4_GPX2(2),
 	.shutdown_gpio	= -1,
 	.type		= RFKILL_TYPE_BLUETOOTH,
@@ -644,6 +669,9 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&s5p_device_mixer,
+#ifdef CONFIG_DRM_EXYNOS
+	&exynos_device_drm,
+#endif
 	&exynos4_device_ohci,
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
@@ -719,7 +747,12 @@ static void __init origen_machine_init(void)
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
 
+#ifdef CONFIG_DRM_EXYNOS
+	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+	exynos4_fimd0_gpio_setup_24bpp();
+#else
 	s5p_fimd0_set_platdata(&origen_lcd_pdata);
+#endif
 
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
 
diff --git a/trunk/arch/arm/mach-exynos/mach-smdk4x12.c b/trunk/arch/arm/mach-exynos/mach-smdk4x12.c
index d00e4f016a68..7fca248efd32 100644
--- a/trunk/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/trunk/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -31,6 +31,7 @@
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 #include <plat/keypad.h>
+#include <plat/mfc.h>
 #include <plat/regs-serial.h>
 #include <plat/sdhci.h>
 
@@ -244,6 +245,14 @@ static struct platform_device *smdk4x12_devices[] __initdata = {
 	&s3c_device_i2c7,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
+	&s5p_device_fimc_md,
+	&s5p_device_mfc,
+	&s5p_device_mfc_l,
+	&s5p_device_mfc_r,
 	&samsung_device_keypad,
 };
 
@@ -256,6 +265,11 @@ static void __init smdk4x12_map_io(void)
 	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
 }
 
+static void __init smdk4x12_reserve(void)
+{
+	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
 static void __init smdk4x12_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -293,6 +307,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
 	.restart	= exynos4_restart,
+	.reserve	= &smdk4x12_reserve,
 MACHINE_END
 
 MACHINE_START(SMDK4412, "SMDK4412")
@@ -305,4 +320,5 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
 	.restart	= exynos4_restart,
+	.reserve	= &smdk4x12_reserve,
 MACHINE_END
diff --git a/trunk/arch/arm/mach-exynos/mach-smdkv310.c b/trunk/arch/arm/mach-exynos/mach-smdkv310.c
index 83b91fa777c1..afe7554d4ef5 100644
--- a/trunk/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/trunk/arch/arm/mach-exynos/mach-smdkv310.c
@@ -44,6 +44,7 @@
 #include <mach/map.h>
 #include <mach/ohci.h>
 
+#include <drm/exynos_drm.h>
 #include "common.h"
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -160,6 +161,26 @@ static struct platform_device smdkv310_lcd_lte480wv = {
 	.dev.platform_data	= &smdkv310_lcd_lte480wv_data,
 };
 
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+	.panel	= {
+		.timing	= {
+			.left_margin	= 13,
+			.right_margin	= 8,
+			.upper_margin	= 7,
+			.lower_margin	= 5,
+			.hsync_len	= 3,
+			.vsync_len	= 1,
+			.xres		= 800,
+			.yres		= 480,
+		},
+	},
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.default_win	= 0,
+	.bpp		= 32,
+};
+#else
 static struct s3c_fb_pd_win smdkv310_fb_win0 = {
 	.win_mode = {
 		.left_margin	= 13,
@@ -181,6 +202,7 @@ static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
+#endif
 
 static struct resource smdkv310_smsc911x_resources[] = {
 	[0] = {
@@ -273,6 +295,9 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s5p_device_fimc_md,
 	&s5p_device_g2d,
 	&s5p_device_jpeg,
+#ifdef CONFIG_DRM_EXYNOS
+	&exynos_device_drm,
+#endif
 	&exynos4_device_ac97,
 	&exynos4_device_i2s0,
 	&exynos4_device_ohci,
@@ -364,7 +389,12 @@ static void __init smdkv310_machine_init(void)
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+#ifdef CONFIG_DRM_EXYNOS
+	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+	exynos4_fimd0_gpio_setup_24bpp();
+#else
 	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
+#endif
 
 	smdkv310_ehci_init();
 	smdkv310_ohci_init();
diff --git a/trunk/arch/arm/mach-exynos/mach-universal_c210.c b/trunk/arch/arm/mach-exynos/mach-universal_c210.c
index cb2b027f09a6..a6959bbfef89 100644
--- a/trunk/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/trunk/arch/arm/mach-exynos/mach-universal_c210.c
@@ -23,6 +23,7 @@
 #include <linux/i2c-gpio.h>
 #include <linux/i2c/mcs.h>
 #include <linux/i2c/atmel_mxt_ts.h>
+#include <drm/exynos_drm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -812,6 +813,29 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
 	/* Gyro, To be updated */
 };
 
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+	.panel = {
+		.timing	= {
+			.left_margin	= 16,
+			.right_margin	= 16,
+			.upper_margin	= 2,
+			.lower_margin	= 28,
+			.hsync_len	= 2,
+			.vsync_len	= 1,
+			.xres		= 480,
+			.yres		= 800,
+			.refresh	= 55,
+		},
+	},
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.default_win	= 3,
+	.bpp		= 32,
+};
+#else
 /* Frame Buffer */
 static struct s3c_fb_pd_win universal_fb_win0 = {
 	.win_mode = {
@@ -839,6 +863,7 @@ static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
 			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
+#endif
 
 static struct regulator_consumer_supply cam_vt_dio_supply =
 	REGULATOR_SUPPLY("vdd_core", "0-003c");
@@ -1048,6 +1073,9 @@ static struct platform_device *universal_devices[] __initdata = {
 	&s5p_device_onenand,
 	&s5p_device_fimd0,
 	&s5p_device_jpeg,
+#ifdef CONFIG_DRM_EXYNOS
+	&exynos_device_drm,
+#endif
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
@@ -1094,7 +1122,12 @@ static void __init universal_machine_init(void)
 	s5p_i2c_hdmiphy_set_platdata(NULL);
 	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
 
+#ifdef CONFIG_DRM_EXYNOS
+	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+	exynos4_fimd0_gpio_setup_24bpp();
+#else
 	s5p_fimd0_set_platdata(&universal_lcd_pdata);
+#endif
 
 	universal_touchkey_init();
 	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
diff --git a/trunk/arch/arm/mach-imx/Kconfig b/trunk/arch/arm/mach-imx/Kconfig
index 7561eca131b0..18399d10d170 100644
--- a/trunk/arch/arm/mach-imx/Kconfig
+++ b/trunk/arch/arm/mach-imx/Kconfig
@@ -163,6 +163,7 @@ config MACH_EUKREA_CPUIMX25SD
 	select SOC_IMX25
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMXDI_RTC
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -181,6 +182,7 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD
 	bool "Eukrea MBIMXSD development board"
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
 	help
 	  This adds board specific devices that can be found on Eukrea's
@@ -606,6 +608,7 @@ config MACH_EUKREA_MBIMXSD35_BASEBOARD
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
 	help
 	  This adds board specific devices that can be found on Eukrea's
@@ -682,42 +685,13 @@ config MACH_MX51_3DS
 	  Include support for MX51PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_EUKREA_CPUIMX51
-	bool "Support Eukrea CPUIMX51 module"
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for Eukrea CPUIMX51 platform. This includes
-	  specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX51
-	default MACH_EUKREA_MBIMX51_BASEBOARD
-
-config MACH_EUKREA_MBIMX51_BASEBOARD
-	prompt "Eukrea MBIMX51 development board"
-	bool
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMX51 evaluation board.
-
-endchoice
-
 config MACH_EUKREA_CPUIMX51SD
 	bool "Support Eukrea CPUIMX51SD module"
 	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
@@ -733,6 +707,7 @@ choice
 config MACH_EUKREA_MBIMXSD51_BASEBOARD
 	prompt "Eukrea MBIMXSD development board"
 	bool
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select LEDS_GPIO_REGISTER
 	help
diff --git a/trunk/arch/arm/mach-imx/Makefile b/trunk/arch/arm/mach-imx/Makefile
index ab939c5046c3..4937c070a57e 100644
--- a/trunk/arch/arm/mach-imx/Makefile
+++ b/trunk/arch/arm/mach-imx/Makefile
@@ -83,10 +83,8 @@ obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
 obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
 obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
 obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
 obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
 obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
 obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
diff --git a/trunk/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c b/trunk/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
deleted file mode 100644
index a6a3ab8f1b1c..000000000000
--- a/trunk/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/leds.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/mach/arch.h>
-
-#include "devices-imx51.h"
-
-#define MBIMX51_TSC2007_GPIO	IMX_GPIO_NR(3, 30)
-#define MBIMX51_LED0		IMX_GPIO_NR(3, 5)
-#define MBIMX51_LED1		IMX_GPIO_NR(3, 6)
-#define MBIMX51_LED2		IMX_GPIO_NR(3, 7)
-#define MBIMX51_LED3		IMX_GPIO_NR(3, 8)
-
-static const struct gpio_led mbimx51_leds[] __initconst = {
-	{
-		.name			= "led0",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED0,
-	},
-	{
-		.name			= "led1",
-		.default_trigger	= "nand-disk",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED1,
-	},
-	{
-		.name			= "led2",
-		.default_trigger	= "mmc0",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED2,
-	},
-	{
-		.name			= "led3",
-		.default_trigger	= "default-on",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED3,
-	},
-};
-
-static const struct gpio_led_platform_data mbimx51_leds_info __initconst = {
-	.leds		= mbimx51_leds,
-	.num_leds	= ARRAY_SIZE(mbimx51_leds),
-};
-
-static iomux_v3_cfg_t mbimx51_pads[] = {
-	/* UART2 */
-	MX51_PAD_UART2_RXD__UART2_RXD,
-	MX51_PAD_UART2_TXD__UART2_TXD,
-
-	/* UART3 */
-	MX51_PAD_UART3_RXD__UART3_RXD,
-	MX51_PAD_UART3_TXD__UART3_TXD,
-	MX51_PAD_KEY_COL4__UART3_RTS,
-	MX51_PAD_KEY_COL5__UART3_CTS,
-
-	/* TSC2007 IRQ */
-	MX51_PAD_NANDF_D10__GPIO3_30,
-
-	/* LEDS */
-	MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
-	MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
-	MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
-	MX51_PAD_DISPB2_SER_RS__GPIO3_8,
-
-	/* KPP */
-	MX51_PAD_KEY_ROW0__KEY_ROW0,
-	MX51_PAD_KEY_ROW1__KEY_ROW1,
-	MX51_PAD_KEY_ROW2__KEY_ROW2,
-	MX51_PAD_KEY_ROW3__KEY_ROW3,
-	MX51_PAD_KEY_COL0__KEY_COL0,
-	MX51_PAD_KEY_COL1__KEY_COL1,
-	MX51_PAD_KEY_COL2__KEY_COL2,
-	MX51_PAD_KEY_COL3__KEY_COL3,
-
-	/* SD 1 */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-
-	/* SD 2 */
-	MX51_PAD_SD2_CMD__SD2_CMD,
-	MX51_PAD_SD2_CLK__SD2_CLK,
-	MX51_PAD_SD2_DATA0__SD2_DATA0,
-	MX51_PAD_SD2_DATA1__SD2_DATA1,
-	MX51_PAD_SD2_DATA2__SD2_DATA2,
-	MX51_PAD_SD2_DATA3__SD2_DATA3,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int mbimx51_keymap[] = {
-	KEY(0, 0, KEY_1),
-	KEY(0, 1, KEY_2),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_UP),
-
-	KEY(1, 0, KEY_4),
-	KEY(1, 1, KEY_5),
-	KEY(1, 2, KEY_6),
-	KEY(1, 3, KEY_LEFT),
-
-	KEY(2, 0, KEY_7),
-	KEY(2, 1, KEY_8),
-	KEY(2, 2, KEY_9),
-	KEY(2, 3, KEY_RIGHT),
-
-	KEY(3, 0, KEY_0),
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_ESC),
-	KEY(3, 3, KEY_ENTER),
-};
-
-static const struct matrix_keymap_data mbimx51_map_data __initconst = {
-	.keymap		= mbimx51_keymap,
-	.keymap_size	= ARRAY_SIZE(mbimx51_keymap),
-};
-
-static int tsc2007_get_pendown_state(void)
-{
-	return !gpio_get_value(MBIMX51_TSC2007_GPIO);
-}
-
-struct tsc2007_platform_data tsc2007_data = {
-	.model = 2007,
-	.x_plate_ohms = 180,
-	.get_pendown_state = tsc2007_get_pendown_state,
-};
-
-static struct i2c_board_info mbimx51_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tsc2007", 0x49),
-		.irq  = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
-		.platform_data = &tsc2007_data,
-	}, {
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-/*
- * baseboard initialization.
- */
-void __init eukrea_mbimx51_baseboard_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mbimx51_pads,
-					ARRAY_SIZE(mbimx51_pads));
-
-	imx51_add_imx_uart(1, NULL);
-	imx51_add_imx_uart(2, &uart_pdata);
-
-	gpio_request(MBIMX51_LED0, "LED0");
-	gpio_direction_output(MBIMX51_LED0, 1);
-	gpio_free(MBIMX51_LED0);
-	gpio_request(MBIMX51_LED1, "LED1");
-	gpio_direction_output(MBIMX51_LED1, 1);
-	gpio_free(MBIMX51_LED1);
-	gpio_request(MBIMX51_LED2, "LED2");
-	gpio_direction_output(MBIMX51_LED2, 1);
-	gpio_free(MBIMX51_LED2);
-	gpio_request(MBIMX51_LED3, "LED3");
-	gpio_direction_output(MBIMX51_LED3, 1);
-	gpio_free(MBIMX51_LED3);
-
-	gpio_led_register_device(-1, &mbimx51_leds_info);
-
-	imx51_add_imx_keypad(&mbimx51_map_data);
-
-	gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
-	gpio_direction_input(MBIMX51_TSC2007_GPIO);
-	irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO),
-					IRQF_TRIGGER_FALLING);
-	i2c_register_board_info(1, mbimx51_i2c_devices,
-				ARRAY_SIZE(mbimx51_i2c_devices));
-
-	imx51_add_sdhci_esdhc_imx(0, NULL);
-	imx51_add_sdhci_esdhc_imx(1, NULL);
-}
diff --git a/trunk/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/trunk/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index 2cf603e11c4f..dfd2da87c2df 100644
--- a/trunk/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/trunk/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -23,6 +23,7 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/spi/spi.h>
 #include <video/platform_lcd.h>
 
 #include <mach/hardware.h>
@@ -87,12 +88,22 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	/* CAN */
 	MX25_PAD_GPIO_D__CAN2_RX,
 	MX25_PAD_GPIO_C__CAN2_TX,
+	/* SPI1 */
+	MX25_PAD_CSPI1_MOSI__CSPI1_MOSI,
+	MX25_PAD_CSPI1_MISO__CSPI1_MISO,
+	MX25_PAD_CSPI1_SS0__GPIO_1_16,
+	MX25_PAD_CSPI1_SS1__GPIO_1_17,
+	MX25_PAD_CSPI1_SCLK__CSPI1_SCLK,
+	MX25_PAD_CSPI1_RDY__GPIO_2_22,
 };
 
-#define GPIO_LED1	83
-#define GPIO_SWITCH1	82
-#define GPIO_SD1CD	52
-#define GPIO_LCDPWR	26
+#define GPIO_LED1		IMX_GPIO_NR(3, 19)
+#define GPIO_SWITCH1	IMX_GPIO_NR(3, 18)
+#define GPIO_SD1CD		IMX_GPIO_NR(2, 20)
+#define GPIO_LCDPWR		IMX_GPIO_NR(1, 26)
+#define	GPIO_SPI1_SS0	IMX_GPIO_NR(1, 16)
+#define	GPIO_SPI1_SS1	IMX_GPIO_NR(1, 17)
+#define	GPIO_SPI1_IRQ	IMX_GPIO_NR(2, 22)
 
 static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
 	{
@@ -228,6 +239,30 @@ static struct esdhc_platform_data sd1_pdata = {
 	.wp_type = ESDHC_WP_NONE,
 };
 
+static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = {
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.mode = SPI_MODE_0,
+	},
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_MODE_0,
+	},
+};
+
+static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
+
+static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = {
+	.chipselect     = eukrea_mbimxsd25_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs),
+};
+
 /*
  * system init for baseboard usage. Will be called by cpuimx25 init.
  *
@@ -257,11 +292,17 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
 
 	gpio_request(GPIO_LCDPWR, "LCDPWR");
 	gpio_direction_output(GPIO_LCDPWR, 1);
-	gpio_free(GPIO_SWITCH1);
 
 	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
+	gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
+	gpio_direction_input(GPIO_SPI1_IRQ);
+	gpio_free(GPIO_SPI1_IRQ);
+	imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data);
+	spi_register_board_info(eukrea_mbimxsd25_spi_board_info,
+		ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info));
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
diff --git a/trunk/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/trunk/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
index fd8bf8a425a7..557f6c486053 100644
--- a/trunk/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
+++ b/trunk/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -27,6 +27,7 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/spi/spi.h>
 #include <video/platform_lcd.h>
 #include <linux/i2c.h>
 
@@ -158,12 +159,22 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 	/* SD1 CD */
 	MX35_PAD_LD18__GPIO3_24,
+	/* SPI */
+	MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
+	MX35_PAD_CSPI1_MISO__CSPI1_MISO,
+	MX35_PAD_CSPI1_SS0__GPIO1_18,
+	MX35_PAD_CSPI1_SS1__GPIO1_19,
+	MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
+	MX35_PAD_CSPI1_SPI_RDY__GPIO3_5,
 };
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 29)
 #define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
 #define GPIO_LCDPWR	IMX_GPIO_NR(1, 4)
 #define GPIO_SD1CD	IMX_GPIO_NR(3, 24)
+#define	GPIO_SPI1_SS0	IMX_GPIO_NR(1, 18)
+#define	GPIO_SPI1_SS1	IMX_GPIO_NR(1, 19)
+#define	GPIO_SPI1_IRQ	IMX_GPIO_NR(3, 5)
 
 static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
 				   unsigned int power)
@@ -239,6 +250,30 @@ static struct esdhc_platform_data sd1_pdata = {
 	.wp_type = ESDHC_WP_NONE,
 };
 
+static struct spi_board_info eukrea_mbimxsd35_spi_board_info[] __initdata = {
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.mode = SPI_MODE_0,
+	},
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_MODE_0,
+	},
+};
+
+static int eukrea_mbimxsd35_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
+
+static const struct spi_imx_master eukrea_mbimxsd35_spi0_data __initconst = {
+	.chipselect     = eukrea_mbimxsd35_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimxsd35_spi_cs),
+};
+
 /*
  * system init for baseboard usage. Will be called by cpuimx35 init.
  *
@@ -274,6 +309,13 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
+	gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
+	gpio_direction_input(GPIO_SPI1_IRQ);
+	gpio_free(GPIO_SPI1_IRQ);
+	imx35_add_spi_imx0(&eukrea_mbimxsd35_spi0_data);
+	spi_register_board_info(eukrea_mbimxsd35_spi_board_info,
+		ARRAY_SIZE(eukrea_mbimxsd35_spi_board_info));
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
diff --git a/trunk/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c b/trunk/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
similarity index 51%
rename from trunk/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
rename to trunk/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
index aaa592fdb9ce..96a24b73dc23 100644
--- a/trunk/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
+++ b/trunk/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
@@ -28,6 +28,8 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
+#include <video/platform_lcd.h>
+#include <linux/backlight.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -40,7 +42,7 @@
 
 #include "devices-imx51.h"
 
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
+static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = {
 	/* LED */
 	MX51_PAD_NANDF_D10__GPIO3_30,
 	/* SWITCH */
@@ -66,12 +68,64 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
+	/* SSI */
+	MX51_PAD_AUD3_BB_TXD__AUD3_TXD,
+	MX51_PAD_AUD3_BB_RXD__AUD3_RXD,
+	MX51_PAD_AUD3_BB_CK__AUD3_TXC,
+	MX51_PAD_AUD3_BB_FS__AUD3_TXFS,
+	/* LCD Backlight */
+	MX51_PAD_DI1_D1_CS__GPIO3_4,
+	/* LCD RST */
+	MX51_PAD_CSI1_D9__GPIO3_13,
 };
 
 #define GPIO_LED1	IMX_GPIO_NR(3, 30)
 #define GPIO_SWITCH1	IMX_GPIO_NR(3, 31)
+#define GPIO_LCDRST	IMX_GPIO_NR(3, 13)
+#define GPIO_LCDBL	IMX_GPIO_NR(3, 4)
 
-static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
+static void eukrea_mbimxsd51_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_LCDRST, 1);
+	else
+		gpio_direction_output(GPIO_LCDRST, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimxsd51_lcd_power_data = {
+	.set_power		= eukrea_mbimxsd51_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimxsd51_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimxsd51_lcd_power_data,
+};
+
+static void eukrea_mbimxsd51_bl_set_intensity(int intensity)
+{
+	if (intensity)
+		gpio_direction_output(GPIO_LCDBL, 1);
+	else
+		gpio_direction_output(GPIO_LCDBL, 0);
+}
+
+static struct generic_bl_info eukrea_mbimxsd51_bl_info = {
+	.name			= "eukrea_mbimxsd51-bl",
+	.max_intensity		= 0xff,
+	.default_intensity	= 0xff,
+	.set_bl_intensity	= eukrea_mbimxsd51_bl_set_intensity,
+};
+
+static struct platform_device eukrea_mbimxsd51_bl_dev = {
+	.name			= "generic-bl",
+	.id			= 1,
+	.dev = {
+		.platform_data	= &eukrea_mbimxsd51_bl_info,
+	},
+};
+
+static const struct gpio_led eukrea_mbimxsd51_leds[] __initconst = {
 	{
 		.name			= "led1",
 		.default_trigger	= "heartbeat",
@@ -81,12 +135,12 @@ static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
 };
 
 static const struct gpio_led_platform_data
-		eukrea_mbimxsd_led_info __initconst = {
-	.leds		= eukrea_mbimxsd_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
+		eukrea_mbimxsd51_led_info __initconst = {
+	.leds		= eukrea_mbimxsd51_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd51_leds),
 };
 
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+static struct gpio_keys_button eukrea_mbimxsd51_gpio_buttons[] = {
 	{
 		.gpio		= GPIO_SWITCH1,
 		.code		= BTN_0,
@@ -97,21 +151,39 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 };
 
 static const struct gpio_keys_platform_data
-		eukrea_mbimxsd_button_data __initconst = {
-	.buttons	= eukrea_mbimxsd_gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+		eukrea_mbimxsd51_button_data __initconst = {
+	.buttons	= eukrea_mbimxsd51_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd51_gpio_buttons),
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+static struct i2c_board_info eukrea_mbimxsd51_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("tlv320aic23", 0x1a),
 	},
 };
 
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd51_ssi_pdata __initconst = {
+	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
+static int screen_type;
+
+static int __init eukrea_mbimxsd51_screen_type(char *options)
+{
+	if (!strcmp(options, "dvi"))
+		screen_type = 1;
+	else if (!strcmp(options, "tft"))
+		screen_type = 0;
+
+	return 0;
+}
+__setup("screen_type=", eukrea_mbimxsd51_screen_type);
+
 /*
  * system init for baseboard usage. Will be called by cpuimx51sd init.
  *
@@ -120,8 +192,8 @@ static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
  */
 void __init eukrea_mbimxsd51_baseboard_init(void)
 {
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
-			ARRAY_SIZE(eukrea_mbimxsd_pads)))
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd51_pads,
+			ARRAY_SIZE(eukrea_mbimxsd51_pads)))
 		printk(KERN_ERR "error setting mbimxsd pads !\n");
 
 	imx51_add_imx_uart(1, NULL);
@@ -129,6 +201,8 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
 
 	imx51_add_sdhci_esdhc_imx(0, NULL);
 
+	imx51_add_imx_ssi(0, &eukrea_mbimxsd51_ssi_pdata);
+
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
 	gpio_free(GPIO_LED1);
@@ -137,9 +211,21 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
 	gpio_direction_input(GPIO_SWITCH1);
 	gpio_free(GPIO_SWITCH1);
 
-	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
-	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
-	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
+	gpio_request(GPIO_LCDRST, "LCDRST");
+	gpio_direction_output(GPIO_LCDRST, 0);
+	gpio_request(GPIO_LCDBL, "LCDBL");
+	gpio_direction_output(GPIO_LCDBL, 0);
+	if (!screen_type) {
+		platform_device_register(&eukrea_mbimxsd51_bl_dev);
+		platform_device_register(&eukrea_mbimxsd51_lcd_powerdev);
+	} else {
+		gpio_free(GPIO_LCDRST);
+		gpio_free(GPIO_LCDBL);
+	}
+
+	i2c_register_board_info(0, eukrea_mbimxsd51_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd51_i2c_devices));
+
+	gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info);
+	imx_add_gpio_keys(&eukrea_mbimxsd51_button_data);
 }
diff --git a/trunk/arch/arm/mach-imx/mach-cpuimx51.c b/trunk/arch/arm/mach-imx/mach-cpuimx51.c
deleted file mode 100644
index 944025da8333..000000000000
--- a/trunk/arch/arm/mach-imx/mach-cpuimx51.c
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * based on board-mx51_babbage.c which is
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-
-#define CPUIMX51_USBH1_STP	IMX_GPIO_NR(1, 27)
-#define CPUIMX51_QUARTA_GPIO	IMX_GPIO_NR(3, 28)
-#define CPUIMX51_QUARTB_GPIO	IMX_GPIO_NR(3, 25)
-#define CPUIMX51_QUARTC_GPIO	IMX_GPIO_NR(3, 26)
-#define CPUIMX51_QUARTD_GPIO	IMX_GPIO_NR(3, 27)
-#define CPUIMX51_QUART_XTAL	14745600
-#define CPUIMX51_QUART_REGSHIFT	17
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET		0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
-
-#define	MX51_USB_PLLDIV_12_MHZ		0x00
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-#define	MX51_USB_PLL_DIV_24_MHZ		0x02
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-	}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = 0,
-	.dev = {
-		.platform_data = serial_platform_data,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&serial_device,
-};
-
-static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* I2C2 */
-	MX51_PAD_GPIO1_2__I2C2_SCL,
-	MX51_PAD_GPIO1_3__I2C2_SDA,
-	MX51_PAD_NANDF_D10__GPIO3_30,
-
-	/* QUART IRQ */
-	MX51_PAD_NANDF_D15__GPIO3_25,
-	MX51_PAD_NANDF_D14__GPIO3_26,
-	MX51_PAD_NANDF_D13__GPIO3_27,
-	MX51_PAD_NANDF_D12__GPIO3_28,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-	MX51_PAD_USBH1_STP__USBH1_STP,
-};
-
-static const struct mxc_nand_platform_data
-		eukrea_cpuimx51_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const
-struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
-	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init		= initialize_otg_port,
-	.portsc	= MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
-	.init		= initialize_usbh1_port,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx51_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx51_otg_mode);
-
-/*
- * Board specific initialization.
- */
-static void __init eukrea_cpuimx51_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
-					ARRAY_SIZE(eukrea_cpuimx51_pads));
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info);
-
-	gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
-	gpio_direction_input(CPUIMX51_QUARTA_GPIO);
-	gpio_free(CPUIMX51_QUARTA_GPIO);
-	gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq");
-	gpio_direction_input(CPUIMX51_QUARTB_GPIO);
-	gpio_free(CPUIMX51_QUARTB_GPIO);
-	gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq");
-	gpio_direction_input(CPUIMX51_QUARTC_GPIO);
-	gpio_free(CPUIMX51_QUARTC_GPIO);
-	gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq");
-	gpio_direction_input(CPUIMX51_QUARTD_GPIO);
-	gpio_free(CPUIMX51_QUARTD_GPIO);
-
-	imx51_add_fec(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data);
-	i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
-
-	if (otg_mode_host)
-		imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	else {
-		initialize_otg_port(NULL);
-		imx51_add_fsl_usb2_udc(&usb_pdata);
-	}
-	imx51_add_mxc_ehci_hs(1, &usbh1_config);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
-	eukrea_mbimx51_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx51_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mxc_timer = {
-	.init	= eukrea_cpuimx51_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
-	/* Maintainer: Eric Bénard <eric@eukrea.com> */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mxc_timer,
-	.init_machine = eukrea_cpuimx51_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/trunk/arch/arm/mach-imx/mach-cpuimx51sd.c b/trunk/arch/arm/mach-imx/mach-cpuimx51sd.c
index 9fbe923c8b08..ce341a6874fc 100644
--- a/trunk/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/trunk/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -41,11 +41,13 @@
 
 #define USBH1_RST		IMX_GPIO_NR(2, 28)
 #define ETH_RST			IMX_GPIO_NR(2, 31)
-#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 12)
+#define TSC2007_IRQGPIO_REV2	IMX_GPIO_NR(3, 12)
+#define TSC2007_IRQGPIO_REV3	IMX_GPIO_NR(4, 0)
 #define CAN_IRQGPIO		IMX_GPIO_NR(1, 1)
 #define CAN_RST			IMX_GPIO_NR(4, 15)
 #define CAN_NCS			IMX_GPIO_NR(4, 24)
-#define CAN_RXOBF		IMX_GPIO_NR(1, 4)
+#define CAN_RXOBF_REV2		IMX_GPIO_NR(1, 4)
+#define CAN_RXOBF_REV3		IMX_GPIO_NR(3, 12)
 #define CAN_RX1BF		IMX_GPIO_NR(1, 6)
 #define CAN_TXORTS		IMX_GPIO_NR(1, 7)
 #define CAN_TX1RTS		IMX_GPIO_NR(1, 8)
@@ -90,6 +92,10 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
 	MX51_PAD_I2C1_CLK__GPIO4_16,
 	MX51_PAD_I2C1_DAT__GPIO4_17,
 
+	/* I2C1 */
+	MX51_PAD_SD2_CMD__I2C1_SCL,
+	MX51_PAD_SD2_CLK__I2C1_SDA,
+
 	/* CAN */
 	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
 	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
@@ -108,15 +114,27 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
 	NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
+	NEW_PAD_CTRL(MX51_PAD_NANDF_D8__GPIO4_0, PAD_CTL_PUS_22K_UP |
+			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static int tsc2007_get_pendown_state(void)
+{
+	if (mx51_revision() < IMX_CHIP_REVISION_3_0)
+		return !gpio_get_value(TSC2007_IRQGPIO_REV2);
+	else
+		return !gpio_get_value(TSC2007_IRQGPIO_REV3);
+}
+
 static struct tsc2007_platform_data tsc2007_info = {
 	.model			= 2007,
 	.x_plate_ohms		= 180,
+	.get_pendown_state	= tsc2007_get_pendown_state,
 };
 
 static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
@@ -126,7 +144,6 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
 		I2C_BOARD_INFO("tsc2007", 0x49),
 		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
-		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
 	},
 };
 
@@ -255,10 +272,14 @@ static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = {
 	.num_chipselect	= ARRAY_SIZE(cpuimx51sd_spi1_cs),
 };
 
-static struct platform_device *platform_devices[] __initdata = {
+static struct platform_device *rev2_platform_devices[] __initdata = {
 	&hsi2c_gpio_device,
 };
 
+static const struct imxi2c_platform_data cpuimx51sd_i2c_data __initconst = {
+	.bitrate = 100000,
+};
+
 static void __init eukrea_cpuimx51sd_init(void)
 {
 	imx51_soc_init();
@@ -272,6 +293,7 @@ static void __init eukrea_cpuimx51sd_init(void)
 
 	imx51_add_imx_uart(0, &uart_pdata);
 	imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
+	imx51_add_imx2_wdt(0, NULL);
 
 	gpio_request(ETH_RST, "eth_rst");
 	gpio_set_value(ETH_RST, 1);
@@ -291,13 +313,25 @@ static void __init eukrea_cpuimx51sd_init(void)
 	spi_register_board_info(cpuimx51sd_spi_device,
 				ARRAY_SIZE(cpuimx51sd_spi_device));
 
-	gpio_request(TSC2007_IRQGPIO, "tsc2007_irq");
-	gpio_direction_input(TSC2007_IRQGPIO);
-	gpio_free(TSC2007_IRQGPIO);
+	if (mx51_revision() < IMX_CHIP_REVISION_3_0) {
+		eukrea_cpuimx51sd_i2c_devices[1].irq =
+			gpio_to_irq(TSC2007_IRQGPIO_REV2),
+		platform_add_devices(rev2_platform_devices,
+			ARRAY_SIZE(rev2_platform_devices));
+		gpio_request(TSC2007_IRQGPIO_REV2, "tsc2007_irq");
+		gpio_direction_input(TSC2007_IRQGPIO_REV2);
+		gpio_free(TSC2007_IRQGPIO_REV2);
+	} else {
+		eukrea_cpuimx51sd_i2c_devices[1].irq =
+			gpio_to_irq(TSC2007_IRQGPIO_REV3),
+		imx51_add_imx_i2c(0, &cpuimx51sd_i2c_data);
+		gpio_request(TSC2007_IRQGPIO_REV3, "tsc2007_irq");
+		gpio_direction_input(TSC2007_IRQGPIO_REV3);
+		gpio_free(TSC2007_IRQGPIO_REV3);
+	}
 
 	i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
 			ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	if (otg_mode_host)
 		imx51_add_mxc_ehci_otg(&dr_utmi_config);
diff --git a/trunk/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/trunk/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 76a97a598b9e..d1e04e676e33 100644
--- a/trunk/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/trunk/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -106,6 +106,7 @@ static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
 	.phy_mode       = FSL_USB2_PHY_UTMI,
+	.workaround     = FLS_USB2_WORKAROUND_ENGCM09152,
 };
 
 static int otg_mode_host;
@@ -135,6 +136,7 @@ static void __init eukrea_cpuimx25_init(void)
 	imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
 	imx25_add_imxdi_rtc(NULL);
 	imx25_add_fec(&mx25_fec_pdata);
+	imx25_add_imx2_wdt(NULL);
 
 	i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
 				ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
diff --git a/trunk/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/trunk/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index f7b074f496f0..748ba2e311b5 100644
--- a/trunk/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/trunk/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -38,6 +38,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
+#include <asm/system.h>
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
 
@@ -48,6 +49,14 @@
 #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
 #define SDHC1_IRQ IRQ_GPIOB(25)
 
+#define MOTHERBOARD_BIT2	(GPIO_PORTD + 31)
+#define MOTHERBOARD_BIT1	(GPIO_PORTD + 30)
+#define MOTHERBOARD_BIT0	(GPIO_PORTD + 29)
+
+#define EXPBOARD_BIT2		(GPIO_PORTD + 25)
+#define EXPBOARD_BIT1		(GPIO_PORTD + 27)
+#define EXPBOARD_BIT0		(GPIO_PORTD + 28)
+
 static const int visstrim_m10_pins[] __initconst = {
 	/* UART1 (console) */
 	PE12_PF_UART1_TXD,
@@ -119,6 +128,23 @@ static const int visstrim_m10_pins[] __initconst = {
 	PB19_PF_CSI_D7,
 	PB20_PF_CSI_VSYNC,
 	PB21_PF_CSI_HSYNC,
+	/* mother board version */
+	MOTHERBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	MOTHERBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	MOTHERBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	/* expansion board version */
+	EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+};
+
+static struct gpio visstrim_m10_version_gpios[] = {
+	{ EXPBOARD_BIT0, GPIOF_IN, "exp-version-0" },
+	{ EXPBOARD_BIT1, GPIOF_IN, "exp-version-1" },
+	{ EXPBOARD_BIT2, GPIOF_IN, "exp-version-2" },
+	{ MOTHERBOARD_BIT0, GPIOF_IN, "mother-version-0" },
+	{ MOTHERBOARD_BIT1, GPIOF_IN, "mother-version-1" },
+	{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
 };
 
 /* Camera */
@@ -369,11 +395,40 @@ static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = {
 	.flags			= IMX_SSI_DMA | IMX_SSI_SYN,
 };
 
+static void __init visstrim_m10_revision(void)
+{
+	int exp_version = 0;
+	int mo_version = 0;
+	int ret;
+
+	ret = gpio_request_array(visstrim_m10_version_gpios,
+				 ARRAY_SIZE(visstrim_m10_version_gpios));
+	if (ret) {
+		pr_err("Failed to request version gpios");
+		return;
+	}
+
+	/* Get expansion board version (negative logic) */
+	exp_version |= !gpio_get_value(EXPBOARD_BIT2) << 2;
+	exp_version |= !gpio_get_value(EXPBOARD_BIT1) << 1;
+	exp_version |= !gpio_get_value(EXPBOARD_BIT0);
+
+	/* Get mother board version (negative logic) */
+	mo_version |= !gpio_get_value(MOTHERBOARD_BIT2) << 2;
+	mo_version |= !gpio_get_value(MOTHERBOARD_BIT1) << 1;
+	mo_version |= !gpio_get_value(MOTHERBOARD_BIT0);
+
+	system_rev = 0x27000;
+	system_rev |= (mo_version << 4);
+	system_rev |= exp_version;
+}
+
 static void __init visstrim_m10_board_init(void)
 {
 	int ret;
 
 	imx27_soc_init();
+	visstrim_m10_revision();
 
 	ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
 			ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
diff --git a/trunk/arch/arm/mach-imx/mach-mx35_3ds.c b/trunk/arch/arm/mach-imx/mach-mx35_3ds.c
index 6ae51c6b95b7..e99b016bbbb6 100644
--- a/trunk/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/trunk/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -34,6 +34,8 @@
 #include <linux/usb/otg.h>
 
 #include <linux/mtd/physmap.h>
+#include <linux/mfd/mc13892.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -253,6 +255,8 @@ static iomux_v3_cfg_t mx35pdk_pads[] = {
 	MX35_PAD_CSI_MCLK__IPU_CSI_MCLK,
 	MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK,
 	MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC,
+	/*PMIC IRQ*/
+	MX35_PAD_GPIO2_0__GPIO2_0,
 };
 
 /*
@@ -317,6 +321,193 @@ static struct platform_device mx35_3ds_ov2640 = {
 	},
 };
 
+static struct regulator_consumer_supply sw1_consumers[] = {
+	{
+		.supply = "cpu_vcc",
+	}
+};
+
+static struct regulator_consumer_supply vcam_consumers[] = {
+	/* sgtl5000 */
+	REGULATOR_SUPPLY("VDDA", "0-000a"),
+};
+
+static struct regulator_consumer_supply vaudio_consumers[] = {
+	REGULATOR_SUPPLY("cmos_vio", "soc-camera-pdrv.0"),
+};
+
+static struct regulator_init_data sw1_init = {
+	.constraints = {
+		.name = "SW1",
+		.min_uV = 600000,
+		.max_uV = 1375000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.valid_modes_mask = 0,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
+	.consumer_supplies = sw1_consumers,
+};
+
+static struct regulator_init_data sw2_init = {
+	.constraints = {
+		.name = "SW2",
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data sw3_init = {
+	.constraints = {
+		.name = "SW3",
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data sw4_init = {
+	.constraints = {
+		.name = "SW4",
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data viohi_init = {
+	.constraints = {
+		.name = "VIOHI",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vusb_init = {
+	.constraints = {
+		.name = "VUSB",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vdig_init = {
+	.constraints = {
+		.name = "VDIG",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vpll_init = {
+	.constraints = {
+		.name = "VPLL",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vusb2_init = {
+	.constraints = {
+		.name = "VUSB2",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vvideo_init = {
+	.constraints = {
+		.name = "VVIDEO",
+		.boot_on = 1
+	}
+};
+
+static struct regulator_init_data vaudio_init = {
+	.constraints = {
+		.name = "VAUDIO",
+		.min_uV = 2300000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.boot_on = 1
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vaudio_consumers),
+	.consumer_supplies = vaudio_consumers,
+};
+
+static struct regulator_init_data vcam_init = {
+	.constraints = {
+		.name = "VCAM",
+		.min_uV = 2500000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					REGULATOR_CHANGE_MODE,
+		.valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
+		.boot_on = 1
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vcam_consumers),
+	.consumer_supplies = vcam_consumers,
+};
+
+static struct regulator_init_data vgen1_init = {
+	.constraints = {
+		.name = "VGEN1",
+	}
+};
+
+static struct regulator_init_data vgen2_init = {
+	.constraints = {
+		.name = "VGEN2",
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vgen3_init = {
+	.constraints = {
+		.name = "VGEN3",
+	}
+};
+
+static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = {
+	{ .id = MC13892_SW1, .init_data = &sw1_init },
+	{ .id = MC13892_SW2, .init_data = &sw2_init },
+	{ .id = MC13892_SW3, .init_data = &sw3_init },
+	{ .id = MC13892_SW4, .init_data = &sw4_init },
+	{ .id = MC13892_VIOHI, .init_data = &viohi_init },
+	{ .id = MC13892_VPLL, .init_data = &vpll_init },
+	{ .id = MC13892_VDIG, .init_data = &vdig_init },
+	{ .id = MC13892_VUSB2, .init_data = &vusb2_init },
+	{ .id = MC13892_VVIDEO, .init_data = &vvideo_init },
+	{ .id = MC13892_VAUDIO, .init_data = &vaudio_init },
+	{ .id = MC13892_VCAM, .init_data = &vcam_init },
+	{ .id = MC13892_VGEN1, .init_data = &vgen1_init },
+	{ .id = MC13892_VGEN2, .init_data = &vgen2_init },
+	{ .id = MC13892_VGEN3, .init_data = &vgen3_init },
+	{ .id = MC13892_VUSB, .init_data = &vusb_init },
+};
+
+static struct mc13xxx_platform_data mx35_3ds_mc13892_data = {
+	.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
+	.regulators = {
+		.num_regulators = ARRAY_SIZE(mx35_3ds_regulators),
+		.regulators = mx35_3ds_regulators,
+	},
+};
+
+#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
+
+static struct i2c_board_info mx35_3ds_i2c_mc13892 = {
+
+	I2C_BOARD_INFO("mc13892", 0x08),
+	.platform_data = &mx35_3ds_mc13892_data,
+	.irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
+};
+
+static void __init imx35_3ds_init_mc13892(void)
+{
+	int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq");
+
+	if (ret) {
+		pr_err("failed to get pmic irq: %d\n", ret);
+		return;
+	}
+
+	i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1);
+}
+
 static int mx35_3ds_otg_init(struct platform_device *pdev)
 {
 	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
@@ -412,6 +603,8 @@ static void __init mx35_3ds_init(void)
 	imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 	mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
 	platform_device_register(&mx35_3ds_lcd);
+
+	imx35_3ds_init_mc13892();
 }
 
 static void __init mx35pdk_timer_init(void)
diff --git a/trunk/arch/arm/mach-mmp/Kconfig b/trunk/arch/arm/mach-mmp/Kconfig
index 5a90b9a3ab6e..fa03974fd838 100644
--- a/trunk/arch/arm/mach-mmp/Kconfig
+++ b/trunk/arch/arm/mach-mmp/Kconfig
@@ -113,4 +113,11 @@ config CPU_MMP2
 	select CPU_PJ4
 	help
 	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
+
+config USB_EHCI_MV_U2O
+        bool "EHCI support for PXA USB OTG controller"
+	depends on USB_EHCI_MV
+	help
+	  Enables support for OTG controller which can be switched to host mode.
+
 endif
diff --git a/trunk/arch/arm/mach-mmp/aspenite.c b/trunk/arch/arm/mach-mmp/aspenite.c
index bf5d8e195c3e..223090b1444d 100644
--- a/trunk/arch/arm/mach-mmp/aspenite.c
+++ b/trunk/arch/arm/mach-mmp/aspenite.c
@@ -17,6 +17,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/interrupt.h>
+#include <linux/platform_data/mv_usb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -221,6 +222,21 @@ static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
 	.debounce_interval	= 30,
 };
 
+#if defined(CONFIG_USB_EHCI_MV)
+static char *pxa168_sph_clock_name[] = {
+	[0] = "PXA168-USBCLK",
+};
+
+static struct mv_usb_platform_data pxa168_sph_pdata = {
+	.clknum         = 1,
+	.clkname        = pxa168_sph_clock_name,
+	.mode           = MV_USB_MODE_HOST,
+	.phy_init	= pxa_usb_phy_init,
+	.phy_deinit	= pxa_usb_phy_deinit,
+	.set_vbus	= NULL,
+};
+#endif
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
@@ -236,6 +252,10 @@ static void __init common_init(void)
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
+
+#if defined(CONFIG_USB_EHCI_MV)
+	pxa168_add_usb_host(&pxa168_sph_pdata);
+#endif
 }
 
 MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
diff --git a/trunk/arch/arm/mach-mmp/devices.c b/trunk/arch/arm/mach-mmp/devices.c
index 191d9dea8731..dd2d8b103cc8 100644
--- a/trunk/arch/arm/mach-mmp/devices.c
+++ b/trunk/arch/arm/mach-mmp/devices.c
@@ -9,9 +9,13 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/delay.h>
 
 #include <asm/irq.h>
+#include <mach/irqs.h>
 #include <mach/devices.h>
+#include <mach/cputype.h>
+#include <mach/regs-usb.h>
 
 int __init pxa_register_device(struct pxa_device_desc *desc,
 				void *data, size_t size)
@@ -67,3 +71,281 @@ int __init pxa_register_device(struct pxa_device_desc *desc,
 
 	return platform_device_add(pdev);
 }
+
+#if defined(CONFIG_USB) || defined(CONFIG_USB_GADGET)
+
+/*****************************************************************************
+ * The registers read/write routines
+ *****************************************************************************/
+
+static unsigned int u2o_get(void __iomem *base, unsigned int offset)
+{
+	return readl_relaxed(base + offset);
+}
+
+static void u2o_set(void __iomem *base, unsigned int offset,
+		unsigned int value)
+{
+	u32 reg;
+
+	reg = readl_relaxed(base + offset);
+	reg |= value;
+	writel_relaxed(reg, base + offset);
+	readl_relaxed(base + offset);
+}
+
+static void u2o_clear(void __iomem *base, unsigned int offset,
+		unsigned int value)
+{
+	u32 reg;
+
+	reg = readl_relaxed(base + offset);
+	reg &= ~value;
+	writel_relaxed(reg, base + offset);
+	readl_relaxed(base + offset);
+}
+
+static void u2o_write(void __iomem *base, unsigned int offset,
+		unsigned int value)
+{
+	writel_relaxed(value, base + offset);
+	readl_relaxed(base + offset);
+}
+
+#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV)
+
+#if defined(CONFIG_CPU_PXA910) || defined(CONFIG_CPU_PXA168)
+
+static DEFINE_MUTEX(phy_lock);
+static int phy_init_cnt;
+
+static int usb_phy_init_internal(void __iomem *base)
+{
+	int loops;
+
+	pr_info("Init usb phy!!!\n");
+
+	/* Initialize the USB PHY power */
+	if (cpu_is_pxa910()) {
+		u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
+			| (1<<UTMI_CTRL_PU_REF_SHIFT));
+	}
+
+	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
+	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
+
+	/* UTMI_PLL settings */
+	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
+		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
+		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
+		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
+
+	u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
+		| 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
+		| 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
+		| 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
+
+	/* UTMI_TX */
+	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
+		| UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
+		| UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
+		| UTMI_TX_AMP_MASK);
+	u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
+		| 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
+		| 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
+
+	/* UTMI_RX */
+	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
+		| UTMI_REG_SQ_LENGTH_MASK);
+	u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
+		| 2<<UTMI_REG_SQ_LENGTH_SHIFT);
+
+	/* UTMI_IVREF */
+	if (cpu_is_pxa168())
+		/* fixing Microsoft Altair board interface with NEC hub issue -
+		 * Set UTMI_IVREF from 0x4a3 to 0x4bf */
+		u2o_write(base, UTMI_IVREF, 0x4bf);
+
+	/* toggle VCOCAL_START bit of UTMI_PLL */
+	udelay(200);
+	u2o_set(base, UTMI_PLL, VCOCAL_START);
+	udelay(40);
+	u2o_clear(base, UTMI_PLL, VCOCAL_START);
+
+	/* toggle REG_RCAL_START bit of UTMI_TX */
+	udelay(400);
+	u2o_set(base, UTMI_TX, REG_RCAL_START);
+	udelay(40);
+	u2o_clear(base, UTMI_TX, REG_RCAL_START);
+	udelay(400);
+
+	/* Make sure PHY PLL is ready */
+	loops = 0;
+	while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
+		mdelay(1);
+		loops++;
+		if (loops > 100) {
+			printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n",
+				u2o_get(base, UTMI_PLL));
+			break;
+		}
+	}
+
+	if (cpu_is_pxa168()) {
+		u2o_set(base, UTMI_RESERVE, 1 << 5);
+		/* Turn on UTMI PHY OTG extension */
+		u2o_write(base, UTMI_OTG_ADDON, 1);
+	}
+
+	return 0;
+}
+
+static int usb_phy_deinit_internal(void __iomem *base)
+{
+	pr_info("Deinit usb phy!!!\n");
+
+	if (cpu_is_pxa168())
+		u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
+
+	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
+	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
+	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
+	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
+	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
+
+	return 0;
+}
+
+int pxa_usb_phy_init(void __iomem *phy_reg)
+{
+	mutex_lock(&phy_lock);
+	if (phy_init_cnt++ == 0)
+		usb_phy_init_internal(phy_reg);
+	mutex_unlock(&phy_lock);
+	return 0;
+}
+
+void pxa_usb_phy_deinit(void __iomem *phy_reg)
+{
+	WARN_ON(phy_init_cnt == 0);
+
+	mutex_lock(&phy_lock);
+	if (--phy_init_cnt == 0)
+		usb_phy_deinit_internal(phy_reg);
+	mutex_unlock(&phy_lock);
+}
+#endif
+#endif
+#endif
+
+#ifdef CONFIG_USB_SUPPORT
+static u64 usb_dma_mask = ~(u32)0;
+
+#ifdef CONFIG_USB_MV_UDC
+struct resource pxa168_u2o_resources[] = {
+	/* regbase */
+	[0] = {
+		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
+		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "capregs",
+	},
+	/* phybase */
+	[1] = {
+		.start	= PXA168_U2O_PHYBASE,
+		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "phyregs",
+	},
+	[2] = {
+		.start	= IRQ_PXA168_USB1,
+		.end	= IRQ_PXA168_USB1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa168_device_u2o = {
+	.name		= "mv-udc",
+	.id		= -1,
+	.resource	= pxa168_u2o_resources,
+	.num_resources	= ARRAY_SIZE(pxa168_u2o_resources),
+	.dev		=  {
+		.dma_mask	= &usb_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	}
+};
+#endif /* CONFIG_USB_MV_UDC */
+
+#ifdef CONFIG_USB_EHCI_MV_U2O
+struct resource pxa168_u2oehci_resources[] = {
+	/* regbase */
+	[0] = {
+		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
+		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "capregs",
+	},
+	/* phybase */
+	[1] = {
+		.start	= PXA168_U2O_PHYBASE,
+		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "phyregs",
+	},
+	[2] = {
+		.start	= IRQ_PXA168_USB1,
+		.end	= IRQ_PXA168_USB1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa168_device_u2oehci = {
+	.name		= "pxa-u2oehci",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &usb_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+
+	.num_resources	= ARRAY_SIZE(pxa168_u2oehci_resources),
+	.resource	= pxa168_u2oehci_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_MV_OTG)
+struct resource pxa168_u2ootg_resources[] = {
+	/* regbase */
+	[0] = {
+		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
+		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "capregs",
+	},
+	/* phybase */
+	[1] = {
+		.start	= PXA168_U2O_PHYBASE,
+		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
+		.flags	= IORESOURCE_MEM,
+		.name	= "phyregs",
+	},
+	[2] = {
+		.start	= IRQ_PXA168_USB1,
+		.end	= IRQ_PXA168_USB1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa168_device_u2ootg = {
+	.name		= "mv-otg",
+	.id		= -1,
+	.dev  = {
+		.dma_mask          = &usb_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+
+	.num_resources	= ARRAY_SIZE(pxa168_u2ootg_resources),
+	.resource      = pxa168_u2ootg_resources,
+};
+#endif /* CONFIG_USB_MV_OTG */
+
+#endif
diff --git a/trunk/arch/arm/mach-mmp/include/mach/devices.h b/trunk/arch/arm/mach-mmp/include/mach/devices.h
index d0ec7dae88e4..21217ef11b64 100644
--- a/trunk/arch/arm/mach-mmp/include/mach/devices.h
+++ b/trunk/arch/arm/mach-mmp/include/mach/devices.h
@@ -50,4 +50,7 @@ struct pxa_device_desc mmp2_device_##_name __initdata = {		\
 }
 
 extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
+extern int pxa_usb_phy_init(void __iomem *phy_reg);
+extern void pxa_usb_phy_deinit(void __iomem *phy_reg);
+
 #endif /* __MACH_DEVICE_H */
diff --git a/trunk/arch/arm/mach-mmp/include/mach/pxa168.h b/trunk/arch/arm/mach-mmp/include/mach/pxa168.h
index dc03d580a06d..09dcd6e2b6a8 100644
--- a/trunk/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/trunk/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -16,6 +16,7 @@ extern void pxa168_clear_keypad_wakeup(void);
 #include <plat/pxa27x_keypad.h>
 #include <mach/cputype.h>
 #include <linux/pxa168_eth.h>
+#include <linux/platform_data/mv_usb.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -36,12 +37,9 @@ extern struct pxa_device_desc pxa168_device_fb;
 extern struct pxa_device_desc pxa168_device_keypad;
 extern struct pxa_device_desc pxa168_device_eth;
 
-struct pxa168_usb_pdata {
-	/* If NULL, default phy init routine for PXA168 would be called */
-	int (*phy_init)(void __iomem *usb_phy_reg_base);
-};
 /* pdata can be NULL */
-int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata);
+extern int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata);
+
 
 extern struct platform_device pxa168_device_gpio;
 
diff --git a/trunk/arch/arm/mach-mmp/include/mach/pxa910.h b/trunk/arch/arm/mach-mmp/include/mach/pxa910.h
index e2e1f1e5e124..793634c837ef 100644
--- a/trunk/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/trunk/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -20,6 +20,9 @@ extern struct pxa_device_desc pxa910_device_pwm2;
 extern struct pxa_device_desc pxa910_device_pwm3;
 extern struct pxa_device_desc pxa910_device_pwm4;
 extern struct pxa_device_desc pxa910_device_nand;
+extern struct platform_device pxa168_device_u2o;
+extern struct platform_device pxa168_device_u2ootg;
+extern struct platform_device pxa168_device_u2oehci;
 
 extern struct platform_device pxa910_device_gpio;
 extern struct platform_device pxa910_device_rtc;
diff --git a/trunk/arch/arm/mach-mmp/include/mach/regs-usb.h b/trunk/arch/arm/mach-mmp/include/mach/regs-usb.h
new file mode 100644
index 000000000000..b047bf487506
--- /dev/null
+++ b/trunk/arch/arm/mach-mmp/include/mach/regs-usb.h
@@ -0,0 +1,253 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_REGS_USB_H
+#define __ASM_ARCH_REGS_USB_H
+
+#define PXA168_U2O_REGBASE	(0xd4208000)
+#define PXA168_U2O_PHYBASE	(0xd4207000)
+
+#define PXA168_U2H_REGBASE      (0xd4209000)
+#define PXA168_U2H_PHYBASE      (0xd4206000)
+
+#define MMP3_HSIC1_REGBASE	(0xf0001000)
+#define MMP3_HSIC1_PHYBASE	(0xf0001800)
+
+#define MMP3_HSIC2_REGBASE	(0xf0002000)
+#define MMP3_HSIC2_PHYBASE	(0xf0002800)
+
+#define MMP3_FSIC_REGBASE	(0xf0003000)
+#define MMP3_FSIC_PHYBASE	(0xf0003800)
+
+
+#define USB_REG_RANGE		(0x1ff)
+#define USB_PHY_RANGE		(0xff)
+
+/* registers */
+#define U2x_CAPREGS_OFFSET       0x100
+
+/* phy regs */
+#define UTMI_REVISION		0x0
+#define UTMI_CTRL		0x4
+#define UTMI_PLL		0x8
+#define UTMI_TX			0xc
+#define UTMI_RX			0x10
+#define UTMI_IVREF		0x14
+#define UTMI_T0			0x18
+#define UTMI_T1			0x1c
+#define UTMI_T2			0x20
+#define UTMI_T3			0x24
+#define UTMI_T4			0x28
+#define UTMI_T5			0x2c
+#define UTMI_RESERVE		0x30
+#define UTMI_USB_INT		0x34
+#define UTMI_DBG_CTL		0x38
+#define UTMI_OTG_ADDON		0x3c
+
+/* For UTMICTRL Register */
+#define UTMI_CTRL_USB_CLK_EN                    (1 << 31)
+/* pxa168 */
+#define UTMI_CTRL_SUSPEND_SET1                  (1 << 30)
+#define UTMI_CTRL_SUSPEND_SET2                  (1 << 29)
+#define UTMI_CTRL_RXBUF_PDWN                    (1 << 24)
+#define UTMI_CTRL_TXBUF_PDWN                    (1 << 11)
+
+#define UTMI_CTRL_INPKT_DELAY_SHIFT             30
+#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
+#define UTMI_CTRL_PU_REF_SHIFT			20
+#define UTMI_CTRL_ARC_PULLDN_SHIFT              12
+#define UTMI_CTRL_PLL_PWR_UP_SHIFT              1
+#define UTMI_CTRL_PWR_UP_SHIFT                  0
+
+/* For UTMI_PLL Register */
+#define UTMI_PLL_PLLCALI12_SHIFT		29
+#define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)
+
+#define UTMI_PLL_PLLVDD18_SHIFT			27
+#define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)
+
+#define UTMI_PLL_PLLVDD12_SHIFT			25
+#define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)
+
+#define UTMI_PLL_CLK_BLK_EN_SHIFT               24
+#define CLK_BLK_EN                              (0x1 << 24)
+#define PLL_READY                               (0x1 << 23)
+#define KVCO_EXT                                (0x1 << 22)
+#define VCOCAL_START                            (0x1 << 21)
+
+#define UTMI_PLL_KVCO_SHIFT			15
+#define UTMI_PLL_KVCO_MASK                      (0x7 << 15)
+
+#define UTMI_PLL_ICP_SHIFT			12
+#define UTMI_PLL_ICP_MASK                       (0x7 << 12)
+
+#define UTMI_PLL_FBDIV_SHIFT                    4
+#define UTMI_PLL_FBDIV_MASK                     (0xFF << 4)
+
+#define UTMI_PLL_REFDIV_SHIFT                   0
+#define UTMI_PLL_REFDIV_MASK                    (0xF << 0)
+
+/* For UTMI_TX Register */
+#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
+#define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)
+
+#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT	26
+#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		(0x1 << 26)
+
+#define UTMI_TX_TXVDD12_SHIFT                   22
+#define UTMI_TX_TXVDD12_MASK                    (0x3 << 22)
+
+#define UTMI_TX_CK60_PHSEL_SHIFT                17
+#define UTMI_TX_CK60_PHSEL_MASK                 (0xf << 17)
+
+#define UTMI_TX_IMPCAL_VTH_SHIFT                14
+#define UTMI_TX_IMPCAL_VTH_MASK                 (0x7 << 14)
+
+#define REG_RCAL_START                          (0x1 << 12)
+
+#define UTMI_TX_LOW_VDD_EN_SHIFT                11
+
+#define UTMI_TX_AMP_SHIFT			0
+#define UTMI_TX_AMP_MASK			(0x7 << 0)
+
+/* For UTMI_RX Register */
+#define UTMI_REG_SQ_LENGTH_SHIFT                15
+#define UTMI_REG_SQ_LENGTH_MASK                 (0x3 << 15)
+
+#define UTMI_RX_SQ_THRESH_SHIFT                 4
+#define UTMI_RX_SQ_THRESH_MASK                  (0xf << 4)
+
+#define UTMI_OTG_ADDON_OTG_ON			(1 << 0)
+
+/* For MMP3 USB Phy */
+#define USB2_PLL_REG0		0x4
+#define USB2_PLL_REG1		0x8
+#define USB2_TX_REG0		0x10
+#define USB2_TX_REG1		0x14
+#define USB2_TX_REG2		0x18
+#define USB2_RX_REG0		0x20
+#define USB2_RX_REG1		0x24
+#define USB2_RX_REG2		0x28
+#define USB2_ANA_REG0		0x30
+#define USB2_ANA_REG1		0x34
+#define USB2_ANA_REG2		0x38
+#define USB2_DIG_REG0		0x3C
+#define USB2_DIG_REG1		0x40
+#define USB2_DIG_REG2		0x44
+#define USB2_DIG_REG3		0x48
+#define USB2_TEST_REG0		0x4C
+#define USB2_TEST_REG1		0x50
+#define USB2_TEST_REG2		0x54
+#define USB2_CHARGER_REG0	0x58
+#define USB2_OTG_REG0		0x5C
+#define USB2_PHY_MON0		0x60
+#define USB2_RESETVE_REG0	0x64
+#define USB2_ICID_REG0		0x78
+#define USB2_ICID_REG1		0x7C
+
+/* USB2_PLL_REG0 */
+/* This is for Ax stepping */
+#define USB2_PLL_FBDIV_SHIFT_MMP3		0
+#define USB2_PLL_FBDIV_MASK_MMP3		(0xFF << 0)
+
+#define USB2_PLL_REFDIV_SHIFT_MMP3		8
+#define USB2_PLL_REFDIV_MASK_MMP3		(0xF << 8)
+
+#define USB2_PLL_VDD12_SHIFT_MMP3		12
+#define USB2_PLL_VDD18_SHIFT_MMP3		14
+
+/* This is for B0 stepping */
+#define USB2_PLL_FBDIV_SHIFT_MMP3_B0		0
+#define USB2_PLL_REFDIV_SHIFT_MMP3_B0		9
+#define USB2_PLL_VDD18_SHIFT_MMP3_B0		14
+#define USB2_PLL_FBDIV_MASK_MMP3_B0		0x01FF
+#define USB2_PLL_REFDIV_MASK_MMP3_B0		0x3E00
+
+#define USB2_PLL_CAL12_SHIFT_MMP3		0
+#define USB2_PLL_CALI12_MASK_MMP3		(0x3 << 0)
+
+#define USB2_PLL_VCOCAL_START_SHIFT_MMP3	2
+
+#define USB2_PLL_KVCO_SHIFT_MMP3		4
+#define USB2_PLL_KVCO_MASK_MMP3			(0x7<<4)
+
+#define USB2_PLL_ICP_SHIFT_MMP3			8
+#define USB2_PLL_ICP_MASK_MMP3			(0x7<<8)
+
+#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3		12
+
+#define USB2_PLL_PU_PLL_SHIFT_MMP3		13
+#define USB2_PLL_PU_PLL_MASK			(0x1 << 13)
+
+#define USB2_PLL_READY_MASK_MMP3		(0x1 << 15)
+
+/* USB2_TX_REG0 */
+#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3		8
+#define USB2_TX_IMPCAL_VTH_MASK_MMP3		(0x7 << 8)
+
+#define USB2_TX_RCAL_START_SHIFT_MMP3		13
+
+/* USB2_TX_REG1 */
+#define USB2_TX_CK60_PHSEL_SHIFT_MMP3		0
+#define USB2_TX_CK60_PHSEL_MASK_MMP3		(0xf << 0)
+
+#define USB2_TX_AMP_SHIFT_MMP3			4
+#define USB2_TX_AMP_MASK_MMP3			(0x7 << 4)
+
+#define USB2_TX_VDD12_SHIFT_MMP3		8
+#define USB2_TX_VDD12_MASK_MMP3			(0x3 << 8)
+
+/* USB2_TX_REG2 */
+#define USB2_TX_DRV_SLEWRATE_SHIFT		10
+
+/* USB2_RX_REG0 */
+#define USB2_RX_SQ_THRESH_SHIFT_MMP3		4
+#define USB2_RX_SQ_THRESH_MASK_MMP3		(0xf << 4)
+
+#define USB2_RX_SQ_LENGTH_SHIFT_MMP3		10
+#define USB2_RX_SQ_LENGTH_MASK_MMP3		(0x3 << 10)
+
+/* USB2_ANA_REG1*/
+#define USB2_ANA_PU_ANA_SHIFT_MMP3		14
+
+/* USB2_OTG_REG0 */
+#define USB2_OTG_PU_OTG_SHIFT_MMP3		3
+
+/* fsic registers */
+#define FSIC_MISC			0x4
+#define FSIC_INT			0x28
+#define FSIC_CTRL			0x30
+
+/* HSIC registers */
+#define HSIC_PAD_CTRL			0x4
+
+#define HSIC_CTRL			0x8
+#define HSIC_CTRL_HSIC_ENABLE		(1<<7)
+#define HSIC_CTRL_PLL_BYPASS		(1<<4)
+
+#define TEST_GRP_0			0xc
+#define TEST_GRP_1			0x10
+
+#define HSIC_INT			0x14
+#define HSIC_INT_READY_INT_EN		(1<<10)
+#define HSIC_INT_CONNECT_INT_EN		(1<<9)
+#define HSIC_INT_CORE_INT_EN		(1<<8)
+#define HSIC_INT_HS_READY		(1<<2)
+#define HSIC_INT_CONNECT		(1<<1)
+#define HSIC_INT_CORE			(1<<0)
+
+#define HSIC_CONFIG			0x18
+#define USBHSIC_CTRL			0x20
+
+#define HSIC_USB_CTRL			0x28
+#define HSIC_USB_CTRL_CLKEN		1
+#define	HSIC_USB_CLK_PHY		0x0
+#define HSIC_USB_CLK_PMU		0x1
+
+#endif /* __ASM_ARCH_PXA_U2O_H */
diff --git a/trunk/arch/arm/mach-mmp/pxa168.c b/trunk/arch/arm/mach-mmp/pxa168.c
index b24d2c32cba9..62d787c34475 100644
--- a/trunk/arch/arm/mach-mmp/pxa168.c
+++ b/trunk/arch/arm/mach-mmp/pxa168.c
@@ -14,6 +14,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/mv_usb.h>
 
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
@@ -27,6 +28,7 @@
 #include <mach/mfp.h>
 #include <linux/dma-mapping.h>
 #include <mach/pxa168.h>
+#include <mach/regs-usb.h>
 
 #include "common.h"
 #include "clock.h"
@@ -93,7 +95,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
 	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
 	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
-	INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
+	INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"),
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
@@ -184,17 +186,17 @@ struct platform_device pxa168_device_gpio = {
 struct resource pxa168_usb_host_resources[] = {
 	/* USB Host conroller register base */
 	[0] = {
-		.start	= 0xd4209000,
-		.end	= 0xd4209000 + 0x200,
+		.start	= PXA168_U2H_REGBASE + U2x_CAPREGS_OFFSET,
+		.end	= PXA168_U2H_REGBASE + USB_REG_RANGE,
 		.flags	= IORESOURCE_MEM,
-		.name	= "pxa168-usb-host",
+		.name	= "capregs",
 	},
 	/* USB PHY register base */
 	[1] = {
-		.start	= 0xd4206000,
-		.end	= 0xd4206000 + 0xff,
+		.start	= PXA168_U2H_PHYBASE,
+		.end	= PXA168_U2H_PHYBASE + USB_PHY_RANGE,
 		.flags	= IORESOURCE_MEM,
-		.name	= "pxa168-usb-phy",
+		.name	= "phyregs",
 	},
 	[2] = {
 		.start	= IRQ_PXA168_USB2,
@@ -205,7 +207,7 @@ struct resource pxa168_usb_host_resources[] = {
 
 static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
 struct platform_device pxa168_device_usb_host = {
-	.name = "pxa168-ehci",
+	.name = "pxa-sph",
 	.id   = -1,
 	.dev  = {
 		.dma_mask = &pxa168_usb_host_dmamask,
@@ -216,7 +218,7 @@ struct platform_device pxa168_device_usb_host = {
 	.resource      = pxa168_usb_host_resources,
 };
 
-int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata)
+int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata)
 {
 	pxa168_device_usb_host.dev.platform_data = pdata;
 	return platform_device_register(&pxa168_device_usb_host);
diff --git a/trunk/arch/arm/mach-mmp/pxa910.c b/trunk/arch/arm/mach-mmp/pxa910.c
index 43f8bcc29b67..6da52e9f2bdc 100644
--- a/trunk/arch/arm/mach-mmp/pxa910.c
+++ b/trunk/arch/arm/mach-mmp/pxa910.c
@@ -109,7 +109,7 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"),
+	INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"),
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
diff --git a/trunk/arch/arm/mach-mmp/ttc_dkb.c b/trunk/arch/arm/mach-mmp/ttc_dkb.c
index 3fc9ed21f97d..266215393f44 100644
--- a/trunk/arch/arm/mach-mmp/ttc_dkb.c
+++ b/trunk/arch/arm/mach-mmp/ttc_dkb.c
@@ -17,6 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/mv_usb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -25,6 +26,7 @@
 #include <mach/mfp-pxa910.h>
 #include <mach/pxa910.h>
 #include <mach/irqs.h>
+#include <mach/regs-usb.h>
 
 #include "common.h"
 
@@ -144,6 +146,26 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = {
 	},
 };
 
+#ifdef CONFIG_USB_SUPPORT
+#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O)
+
+static char *pxa910_usb_clock_name[] = {
+	[0] = "U2OCLK",
+};
+
+static struct mv_usb_platform_data ttc_usb_pdata = {
+	.clknum		= 1,
+	.clkname	= pxa910_usb_clock_name,
+	.vbus		= NULL,
+	.mode		= MV_USB_MODE_OTG,
+	.otg_force_a_bus_req = 1,
+	.phy_init	= pxa_usb_phy_init,
+	.phy_deinit	= pxa_usb_phy_deinit,
+	.set_vbus	= NULL,
+};
+#endif
+#endif
+
 static void __init ttc_dkb_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
@@ -154,6 +176,21 @@ static void __init ttc_dkb_init(void)
 	/* off-chip devices */
 	pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
 	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
+
+#ifdef CONFIG_USB_MV_UDC
+	pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
+	platform_device_register(&pxa168_device_u2o);
+#endif
+
+#ifdef CONFIG_USB_EHCI_MV_U2O
+	pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
+	platform_device_register(&pxa168_device_u2oehci);
+#endif
+
+#ifdef CONFIG_USB_MV_OTG
+	pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
+	platform_device_register(&pxa168_device_u2ootg);
+#endif
 }
 
 MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
diff --git a/trunk/arch/arm/mach-omap2/Kconfig b/trunk/arch/arm/mach-omap2/Kconfig
index 8141b76283a6..964ee67a3b77 100644
--- a/trunk/arch/arm/mach-omap2/Kconfig
+++ b/trunk/arch/arm/mach-omap2/Kconfig
@@ -17,6 +17,7 @@ config ARCH_OMAP2PLUS_TYPICAL
 	select MENELAUS if ARCH_OMAP2
 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
 	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
+	select HIGHMEM
 	help
 	  Compile a kernel suitable for booting most boards
 
diff --git a/trunk/arch/arm/mach-omap2/board-4430sdp.c b/trunk/arch/arm/mach-omap2/board-4430sdp.c
index 130ab00c09a2..2e5066458f7f 100644
--- a/trunk/arch/arm/mach-omap2/board-4430sdp.c
+++ b/trunk/arch/arm/mach-omap2/board-4430sdp.c
@@ -384,6 +384,11 @@ static struct platform_device sdp4430_dmic_codec = {
 	.id	= -1,
 };
 
+static struct platform_device sdp4430_hdmi_audio_codec = {
+	.name	= "hdmi-audio-codec",
+	.id	= -1,
+};
+
 static struct omap_abe_twl6040_data sdp4430_abe_audio_data = {
 	.card_name = "SDP4430",
 	.has_hs		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
@@ -418,6 +423,7 @@ static struct platform_device *sdp4430_devices[] __initdata = {
 	&sdp4430_vbat,
 	&sdp4430_dmic_codec,
 	&sdp4430_abe_audio,
+	&sdp4430_hdmi_audio_codec,
 };
 
 static struct omap_musb_board_data musb_board_data = {
@@ -615,7 +621,9 @@ static int __init omap4_i2c_init(void)
 			TWL_COMMON_REGULATOR_VANA |
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
-			TWL_COMMON_REGULATOR_CLK32KG);
+			TWL_COMMON_REGULATOR_CLK32KG |
+			TWL_COMMON_REGULATOR_V1V8 |
+			TWL_COMMON_REGULATOR_V2V1);
 	omap4_pmic_init("twl6030", &sdp4430_twldata,
 			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
diff --git a/trunk/arch/arm/mach-omap2/board-am3517crane.c b/trunk/arch/arm/mach-omap2/board-am3517crane.c
index c3851e8de28b..3b8a53c1f2a8 100644
--- a/trunk/arch/arm/mach-omap2/board-am3517crane.c
+++ b/trunk/arch/arm/mach-omap2/board-am3517crane.c
@@ -30,6 +30,7 @@
 #include "common.h"
 #include <plat/usb.h>
 
+#include "am35xx-emac.h"
 #include "mux.h"
 #include "control.h"
 
@@ -90,6 +91,7 @@ static void __init am3517_crane_init(void)
 	}
 
 	usbhs_init(&usbhs_bdata);
+	am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
 }
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
diff --git a/trunk/arch/arm/mach-omap2/board-cm-t35.c b/trunk/arch/arm/mach-omap2/board-cm-t35.c
index 909a8b91b564..d8c35a3c0fb7 100644
--- a/trunk/arch/arm/mach-omap2/board-cm-t35.c
+++ b/trunk/arch/arm/mach-omap2/board-cm-t35.c
@@ -498,6 +498,10 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
 	.setup          = cm_t35_twl_gpio_setup,
 };
 
+static struct twl4030_power_data cm_t35_power_data = {
+	.use_poweroff	= true,
+};
+
 static struct twl4030_platform_data cm_t35_twldata = {
 	/* platform_data for children goes here */
 	.keypad		= &cm_t35_kp_data,
@@ -505,6 +509,7 @@ static struct twl4030_platform_data cm_t35_twldata = {
 	.vmmc1		= &cm_t35_vmmc1,
 	.vsim		= &cm_t35_vsim,
 	.vio		= &cm_t35_vio,
+	.power		= &cm_t35_power_data,
 };
 
 static void __init cm_t35_init_i2c(void)
diff --git a/trunk/arch/arm/mach-omap2/board-flash.c b/trunk/arch/arm/mach-omap2/board-flash.c
index 0349fd2b68d8..70a81f900bb5 100644
--- a/trunk/arch/arm/mach-omap2/board-flash.c
+++ b/trunk/arch/arm/mach-omap2/board-flash.c
@@ -87,7 +87,7 @@ static struct omap_onenand_platform_data board_onenand_data = {
 	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
 };
 
-static void
+void
 __init board_onenand_init(struct mtd_partition *onenand_parts,
 				u8 nr_parts, u8 cs)
 {
@@ -98,7 +98,7 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
 	gpmc_onenand_init(&board_onenand_data);
 }
 #else
-static void
+void
 __init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
 {
 }
diff --git a/trunk/arch/arm/mach-omap2/board-flash.h b/trunk/arch/arm/mach-omap2/board-flash.h
index d25503a98417..c44b70d52021 100644
--- a/trunk/arch/arm/mach-omap2/board-flash.h
+++ b/trunk/arch/arm/mach-omap2/board-flash.h
@@ -47,3 +47,14 @@ static inline void board_nand_init(struct mtd_partition *nand_parts,
 {
 }
 #endif
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+extern void board_onenand_init(struct mtd_partition *nand_parts,
+					u8 nr_parts, u8 cs);
+#else
+static inline void board_onenand_init(struct mtd_partition *nand_parts,
+					u8 nr_parts, u8 cs)
+{
+}
+#endif
diff --git a/trunk/arch/arm/mach-omap2/board-igep0020.c b/trunk/arch/arm/mach-omap2/board-igep0020.c
index 930c0d380435..16ec5c89e035 100644
--- a/trunk/arch/arm/mach-omap2/board-igep0020.c
+++ b/trunk/arch/arm/mach-omap2/board-igep0020.c
@@ -24,6 +24,8 @@
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
 
+#include <linux/mtd/nand.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -39,6 +41,8 @@
 #include "hsmmc.h"
 #include "sdram-numonyx-m65kxxxxam.h"
 #include "common-board-devices.h"
+#include "board-flash.h"
+#include "control.h"
 
 #define IGEP2_SMSC911X_CS       5
 #define IGEP2_SMSC911X_GPIO     176
@@ -60,6 +64,10 @@
 #define IGEP3_GPIO_LED1_RED	16
 #define IGEP3_GPIO_USBH_NRESET  183
 
+#define IGEP_SYSBOOT_MASK           0x1f
+#define IGEP_SYSBOOT_NAND           0x0f
+#define IGEP_SYSBOOT_ONENAND        0x10
+
 /*
  * IGEP2 Hardware Revision Table
  *
@@ -110,8 +118,10 @@ static void __init igep2_get_revision(void)
 	gpio_free(IGEP2_GPIO_LED1_RED);
 }
 
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if defined(CONFIG_MTD_ONENAND_OMAP2) ||		\
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) ||	\
+	defined(CONFIG_MTD_NAND_OMAP2) ||		\
+	defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 
 #define ONENAND_MAP             0x20000000
 
@@ -123,7 +133,7 @@ static void __init igep2_get_revision(void)
  * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
  */
 
-static struct mtd_partition igep_onenand_partitions[] = {
+static struct mtd_partition igep_flash_partitions[] = {
 	{
 		.name           = "X-Loader",
 		.offset         = 0,
@@ -151,50 +161,28 @@ static struct mtd_partition igep_onenand_partitions[] = {
 	},
 };
 
-static struct omap_onenand_platform_data igep_onenand_data = {
-	.parts = igep_onenand_partitions,
-	.nr_parts = ARRAY_SIZE(igep_onenand_partitions),
-	.dma_channel	= -1,	/* disable DMA in OMAP OneNAND driver */
-};
-
-static struct platform_device igep_onenand_device = {
-	.name		= "omap2-onenand",
-	.id		= -1,
-	.dev = {
-		.platform_data = &igep_onenand_data,
-	},
-};
+static inline u32 igep_get_sysboot_value(void)
+{
+	return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK;
+}
 
 static void __init igep_flash_init(void)
 {
-	u8 cs = 0;
-	u8 onenandcs = GPMC_CS_NUM + 1;
-
-	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
-		u32 ret;
-		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-		/* Check if NAND/oneNAND is configured */
-		if ((ret & 0xC00) == 0x800)
-			/* NAND found */
-			pr_err("IGEP: Unsupported NAND found\n");
-		else {
-			ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-			if ((ret & 0x3F) == (ONENAND_MAP >> 24))
-				/* ONENAND found */
-				onenandcs = cs;
-		}
-	}
-
-	if (onenandcs > GPMC_CS_NUM) {
-		pr_err("IGEP: Unable to find configuration in GPMC\n");
-		return;
+	u32 mux;
+	mux = igep_get_sysboot_value();
+
+	if (mux == IGEP_SYSBOOT_NAND) {
+		pr_info("IGEP: initializing NAND memory device\n");
+		board_nand_init(igep_flash_partitions,
+				ARRAY_SIZE(igep_flash_partitions),
+				0, NAND_BUSWIDTH_16);
+	} else if (mux == IGEP_SYSBOOT_ONENAND) {
+		pr_info("IGEP: initializing OneNAND memory device\n");
+		board_onenand_init(igep_flash_partitions,
+				   ARRAY_SIZE(igep_flash_partitions), 0);
+	} else {
+		pr_err("IGEP: Flash: unsupported sysboot sequence found\n");
 	}
-
-	igep_onenand_data.cs = onenandcs;
-
-	if (platform_device_register(&igep_onenand_device) < 0)
-		pr_err("IGEP: Unable to register OneNAND device\n");
 }
 
 #else
diff --git a/trunk/arch/arm/mach-omap2/board-omap3beagle.c b/trunk/arch/arm/mach-omap2/board-omap3beagle.c
index 7be8d659d91d..ae7d3a737baf 100644
--- a/trunk/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/trunk/arch/arm/mach-omap2/board-omap3beagle.c
@@ -83,11 +83,13 @@ static struct {
 	int usb_pwr_level;
 	int reset_gpio;
 	int usr_button_gpio;
+	int mmc_caps;
 } beagle_config = {
 	.mmc1_gpio_wp = -EINVAL,
 	.usb_pwr_level = GPIOF_OUT_INIT_LOW,
 	.reset_gpio = 129,
 	.usr_button_gpio = 4,
+	.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 };
 
 static struct gpio omap3_beagle_rev_gpios[] __initdata = {
@@ -145,10 +147,12 @@ static void __init omap3_beagle_init_rev(void)
 		printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
 		beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
+		beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA;
 		break;
 	case 2:
 		printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
+		beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA;
 		break;
 	default:
 		printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
@@ -251,7 +255,7 @@ static void __init beagle_display_init(void)
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_wp	= -EINVAL,
 		.deferred	= true,
 	},
@@ -523,6 +527,7 @@ static void __init omap3_beagle_init(void)
 
 	if (beagle_config.mmc1_gpio_wp != -EINVAL)
 		omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
+	mmc[0].caps = beagle_config.mmc_caps;
 	omap_hsmmc_init(mmc);
 
 	omap3_beagle_i2c_init();
diff --git a/trunk/arch/arm/mach-omap2/board-omap3logic.c b/trunk/arch/arm/mach-omap2/board-omap3logic.c
index 9b3c141ff51b..c008bf8e1c36 100644
--- a/trunk/arch/arm/mach-omap2/board-omap3logic.c
+++ b/trunk/arch/arm/mach-omap2/board-omap3logic.c
@@ -4,8 +4,9 @@
  * Copyright (C) 2010 Li-Pro.Net
  * Stephan Linz <linz@li-pro.net>
  *
- * Copyright (C) 2010 Logic Product Development, Inc.
+ * Copyright (C) 2010-2012 Logic Product Development, Inc.
  * Peter Barada <peter.barada@logicpd.com>
+ * Ashwin BIhari <ashwin.bihari@logicpd.com>
  *
  * Modified from Beagle, EVM, and RX51
  *
@@ -45,6 +46,7 @@
 #include <plat/gpmc-smsc911x.h>
 #include <plat/gpmc.h>
 #include <plat/sdrc.h>
+#include <plat/usb.h>
 
 #define OMAP3LOGIC_SMSC911X_CS			1
 
@@ -85,6 +87,11 @@ static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
 			| BIT(13) | BIT(15) | BIT(16) | BIT(17),
 };
 
+static struct twl4030_usb_data omap3logic_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+
 static struct twl4030_platform_data omap3logic_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -92,6 +99,7 @@ static struct twl4030_platform_data omap3logic_twldata = {
 	/* platform_data for children goes here */
 	.gpio		= &omap3logic_gpio_data,
 	.vmmc1		= &omap3logic_vmmc1,
+	.usb		= &omap3logic_usb_data,
 };
 
 static int __init omap3logic_i2c_init(void)
@@ -185,6 +193,20 @@ static inline void __init board_smsc911x_init(void)
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* mUSB */
+	OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #endif
@@ -205,6 +227,8 @@ static void __init omap3logic_init(void)
 	board_mmc_init();
 	board_smsc911x_init();
 
+	usb_musb_init(NULL);
+
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
diff --git a/trunk/arch/arm/mach-omap2/board-omap4panda.c b/trunk/arch/arm/mach-omap2/board-omap4panda.c
index 1b782ba53433..c1061d439fe9 100644
--- a/trunk/arch/arm/mach-omap2/board-omap4panda.c
+++ b/trunk/arch/arm/mach-omap2/board-omap4panda.c
@@ -28,6 +28,7 @@
 #include <linux/mfd/twl6040.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
+#include <linux/ti_wilink_st.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
@@ -58,12 +59,21 @@
 #define HDMI_GPIO_HPD  63 /* Hotplug detect */
 
 /* wl127x BT, FM, GPS connectivity chip */
-static int wl1271_gpios[] = {46, -1, -1};
+static struct ti_st_plat_data wilink_platform_data = {
+	.nshutdown_gpio	= 46,
+	.dev_name	= "/dev/ttyO1",
+	.flow_cntrl	= 1,
+	.baud_rate	= 3000000,
+	.chip_enable	= NULL,
+	.suspend	= NULL,
+	.resume		= NULL,
+};
+
 static struct platform_device wl1271_device = {
 	.name	= "kim",
 	.id	= -1,
 	.dev	= {
-		.platform_data	= &wl1271_gpios,
+		.platform_data	= &wilink_platform_data,
 	},
 };
 
@@ -117,6 +127,11 @@ static struct platform_device panda_abe_audio = {
 	},
 };
 
+static struct platform_device panda_hdmi_audio_codec = {
+	.name	= "hdmi-audio-codec",
+	.id	= -1,
+};
+
 static struct platform_device btwilink_device = {
 	.name	= "btwilink",
 	.id	= -1,
@@ -126,6 +141,7 @@ static struct platform_device *panda_devices[] __initdata = {
 	&leds_gpio,
 	&wl1271_device,
 	&panda_abe_audio,
+	&panda_hdmi_audio_codec,
 	&btwilink_device,
 };
 
@@ -323,7 +339,9 @@ static int __init omap4_panda_i2c_init(void)
 			TWL_COMMON_REGULATOR_VANA |
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
-			TWL_COMMON_REGULATOR_CLK32KG);
+			TWL_COMMON_REGULATOR_CLK32KG |
+			TWL_COMMON_REGULATOR_V1V8 |
+			TWL_COMMON_REGULATOR_V2V1);
 	omap4_pmic_init("twl6030", &omap4_panda_twldata,
 			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
diff --git a/trunk/arch/arm/mach-omap2/board-rx51-peripherals.c b/trunk/arch/arm/mach-omap2/board-rx51-peripherals.c
index d87ee0612098..415a4b7e86b8 100644
--- a/trunk/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/trunk/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -44,6 +44,7 @@
 #include <linux/leds-lp5523.h>
 
 #include <../drivers/staging/iio/light/tsl2563.h>
+#include <linux/lis3lv02d.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -63,6 +64,9 @@
 #define RX51_TSC2005_RESET_GPIO         104
 #define RX51_TSC2005_IRQ_GPIO           100
 
+#define LIS302_IRQ1_GPIO 181
+#define LIS302_IRQ2_GPIO 180  /* Not yet in use */
+
 /* list all spi devices here */
 enum {
 	RX51_SPI_WL1251,
@@ -73,6 +77,77 @@ enum {
 static struct wl12xx_platform_data wl1251_pdata;
 static struct tsc2005_platform_data tsc2005_pdata;
 
+#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
+static int lis302_setup(void)
+{
+	int err;
+	int irq1 = LIS302_IRQ1_GPIO;
+	int irq2 = LIS302_IRQ2_GPIO;
+
+	/* gpio for interrupt pin 1 */
+	err = gpio_request(irq1, "lis3lv02dl_irq1");
+	if (err) {
+		printk(KERN_ERR "lis3lv02dl: gpio request failed\n");
+		goto out;
+	}
+
+	/* gpio for interrupt pin 2 */
+	err = gpio_request(irq2, "lis3lv02dl_irq2");
+	if (err) {
+		gpio_free(irq1);
+		printk(KERN_ERR "lis3lv02dl: gpio request failed\n");
+		goto out;
+	}
+
+	gpio_direction_input(irq1);
+	gpio_direction_input(irq2);
+
+out:
+	return err;
+}
+
+static int lis302_release(void)
+{
+	gpio_free(LIS302_IRQ1_GPIO);
+	gpio_free(LIS302_IRQ2_GPIO);
+
+	return 0;
+}
+
+static struct lis3lv02d_platform_data rx51_lis3lv02d_data = {
+	.click_flags    = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y |
+			  LIS3_CLICK_SINGLE_Z,
+	/* Limits are 0.5g * value */
+	.click_thresh_x = 8,
+	.click_thresh_y = 8,
+	.click_thresh_z = 10,
+	/* Click must be longer than time limit */
+	.click_time_limit = 9,
+	/* Kind of debounce filter */
+	.click_latency    = 50,
+
+	/* Limits for all axis. millig-value / 18 to get HW values */
+	.wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI,
+	.wakeup_thresh = 800 / 18,
+	.wakeup_flags2 = LIS3_WAKEUP_Z_HI ,
+	.wakeup_thresh2 = 900 / 18,
+
+	.hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE,
+
+	/* Interrupt line 2 for click detection, line 1 for thresholds */
+	.irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12,
+
+	.axis_x = LIS3_DEV_X,
+	.axis_y = LIS3_INV_DEV_Y,
+	.axis_z = LIS3_INV_DEV_Z,
+	.setup_resources = lis302_setup,
+	.release_resources = lis302_release,
+	.st_min_limits = {-32, 3, 3},
+	.st_max_limits = {-3, 32, 32},
+	.irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO),
+};
+#endif
+
 #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
 static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
 	.cover_comp_gain = 16,
@@ -950,6 +1025,16 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
 	}
 };
 
+static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
+#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("lis3lv02d", 0x1d),
+		.platform_data = &rx51_lis3lv02d_data,
+		.irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO),
+	},
+#endif
+};
+
 static int __init rx51_i2c_init(void)
 {
 	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
@@ -971,7 +1056,8 @@ static int __init rx51_i2c_init(void)
 	omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
 	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
-	omap_register_i2c_bus(3, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
+			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
 	return 0;
 }
 
diff --git a/trunk/arch/arm/mach-omap2/devices.c b/trunk/arch/arm/mach-omap2/devices.c
index e4336035c0ea..17dacefaa7ef 100644
--- a/trunk/arch/arm/mach-omap2/devices.c
+++ b/trunk/arch/arm/mach-omap2/devices.c
@@ -355,6 +355,36 @@ static void __init omap_init_dmic(void)
 static inline void omap_init_dmic(void) {}
 #endif
 
+#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \
+		defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE)
+
+static struct platform_device omap_hdmi_audio = {
+	.name	= "omap-hdmi-audio",
+	.id	= -1,
+};
+
+static void __init omap_init_hdmi_audio(void)
+{
+	struct omap_hwmod *oh;
+	struct platform_device *pdev;
+
+	oh = omap_hwmod_lookup("dss_hdmi");
+	if (!oh) {
+		printk(KERN_ERR "Could not look up dss_hdmi hw_mod\n");
+		return;
+	}
+
+	pdev = omap_device_build("omap-hdmi-audio-dai",
+		-1, oh, NULL, 0, NULL, 0, 0);
+	WARN(IS_ERR(pdev),
+	     "Can't build omap_device for omap-hdmi-audio-dai.\n");
+
+	platform_device_register(&omap_hdmi_audio);
+}
+#else
+static inline void omap_init_hdmi_audio(void) {}
+#endif
+
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
 #include <plat/mcspi.h>
@@ -704,6 +734,7 @@ static int __init omap2_init_devices(void)
 	omap_init_mcpdm();
 	omap_init_dmic();
 	omap_init_camera();
+	omap_init_hdmi_audio();
 	omap_init_mbox();
 	omap_init_mcspi();
 	omap_init_pmu();
diff --git a/trunk/arch/arm/mach-omap2/twl-common.c b/trunk/arch/arm/mach-omap2/twl-common.c
index 7a7b89304c48..119d5a910f3a 100644
--- a/trunk/arch/arm/mach-omap2/twl-common.c
+++ b/trunk/arch/arm/mach-omap2/twl-common.c
@@ -31,6 +31,7 @@
 
 #include "twl-common.h"
 #include "pm.h"
+#include "voltage.h"
 
 static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.addr		= 0x48,
@@ -47,6 +48,18 @@ static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
 	},
 };
 
+static int twl_set_voltage(void *data, int target_uV)
+{
+	struct voltagedomain *voltdm = (struct voltagedomain *)data;
+	return voltdm_scale(voltdm, target_uV);
+}
+
+static int twl_get_voltage(void *data)
+{
+	struct voltagedomain *voltdm = (struct voltagedomain *)data;
+	return voltdm_get_voltage(voltdm);
+}
+
 void __init omap_pmic_init(int bus, u32 clkrate,
 			   const char *pmic_type, int pmic_irq,
 			   struct twl4030_platform_data *pmic_data)
@@ -153,6 +166,48 @@ static struct regulator_init_data omap3_vpll2_idata = {
 	.consumer_supplies		= omap3_vpll2_supplies,
 };
 
+static struct regulator_consumer_supply omap3_vdd1_supply[] = {
+	REGULATOR_SUPPLY("vcc", "mpu.0"),
+};
+
+static struct regulator_consumer_supply omap3_vdd2_supply[] = {
+	REGULATOR_SUPPLY("vcc", "l3_main.0"),
+};
+
+static struct regulator_init_data omap3_vdd1 = {
+	.constraints = {
+		.name			= "vdd_mpu_iva",
+		.min_uV			= 600000,
+		.max_uV			= 1450000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap3_vdd1_supply),
+	.consumer_supplies		= omap3_vdd1_supply,
+};
+
+static struct regulator_init_data omap3_vdd2 = {
+	.constraints = {
+		.name			= "vdd_core",
+		.min_uV			= 600000,
+		.max_uV			= 1450000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap3_vdd2_supply),
+	.consumer_supplies		= omap3_vdd2_supply,
+};
+
+static struct twl_regulator_driver_data omap3_vdd1_drvdata = {
+	.get_voltage = twl_get_voltage,
+	.set_voltage = twl_set_voltage,
+};
+
+static struct twl_regulator_driver_data omap3_vdd2_drvdata = {
+	.get_voltage = twl_get_voltage,
+	.set_voltage = twl_set_voltage,
+};
+
 void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 				  u32 pdata_flags, u32 regulators_flags)
 {
@@ -160,6 +215,16 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 		pmic_data->irq_base = TWL4030_IRQ_BASE;
 	if (!pmic_data->irq_end)
 		pmic_data->irq_end = TWL4030_IRQ_END;
+	if (!pmic_data->vdd1) {
+		omap3_vdd1.driver_data = &omap3_vdd1_drvdata;
+		omap3_vdd1_drvdata.data = voltdm_lookup("mpu_iva");
+		pmic_data->vdd1 = &omap3_vdd1;
+	}
+	if (!pmic_data->vdd2) {
+		omap3_vdd2.driver_data = &omap3_vdd2_drvdata;
+		omap3_vdd2_drvdata.data = voltdm_lookup("core");
+		pmic_data->vdd2 = &omap3_vdd2;
+	}
 
 	/* Common platform data configurations */
 	if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
@@ -201,6 +266,7 @@ static struct regulator_init_data omap4_vdac_idata = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.supply_regulator	= "V2V1",
 };
 
 static struct regulator_init_data omap4_vaux2_idata = {
@@ -291,6 +357,7 @@ static struct regulator_init_data omap4_vcxio_idata = {
 	},
 	.num_consumer_supplies	= ARRAY_SIZE(omap4_vcxio_supply),
 	.consumer_supplies	= omap4_vcxio_supply,
+	.supply_regulator	= "V2V1",
 };
 
 static struct regulator_init_data omap4_vusb_idata = {
@@ -310,6 +377,105 @@ static struct regulator_init_data omap4_clk32kg_idata = {
 	},
 };
 
+static struct regulator_consumer_supply omap4_vdd1_supply[] = {
+	REGULATOR_SUPPLY("vcc", "mpu.0"),
+};
+
+static struct regulator_consumer_supply omap4_vdd2_supply[] = {
+	REGULATOR_SUPPLY("vcc", "iva.0"),
+};
+
+static struct regulator_consumer_supply omap4_vdd3_supply[] = {
+	REGULATOR_SUPPLY("vcc", "l3_main.0"),
+};
+
+static struct regulator_init_data omap4_vdd1 = {
+	.constraints = {
+		.name			= "vdd_mpu",
+		.min_uV			= 500000,
+		.max_uV			= 1500000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap4_vdd1_supply),
+	.consumer_supplies		= omap4_vdd1_supply,
+};
+
+static struct regulator_init_data omap4_vdd2 = {
+	.constraints = {
+		.name			= "vdd_iva",
+		.min_uV			= 500000,
+		.max_uV			= 1500000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap4_vdd2_supply),
+	.consumer_supplies		= omap4_vdd2_supply,
+};
+
+static struct regulator_init_data omap4_vdd3 = {
+	.constraints = {
+		.name			= "vdd_core",
+		.min_uV			= 500000,
+		.max_uV			= 1500000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap4_vdd3_supply),
+	.consumer_supplies		= omap4_vdd3_supply,
+};
+
+
+static struct twl_regulator_driver_data omap4_vdd1_drvdata = {
+	.get_voltage = twl_get_voltage,
+	.set_voltage = twl_set_voltage,
+};
+
+static struct twl_regulator_driver_data omap4_vdd2_drvdata = {
+	.get_voltage = twl_get_voltage,
+	.set_voltage = twl_set_voltage,
+};
+
+static struct twl_regulator_driver_data omap4_vdd3_drvdata = {
+	.get_voltage = twl_get_voltage,
+	.set_voltage = twl_set_voltage,
+};
+
+static struct regulator_consumer_supply omap4_v1v8_supply[] = {
+	REGULATOR_SUPPLY("vio", "1-004b"),
+};
+
+static struct regulator_init_data omap4_v1v8_idata = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+		.always_on		= true,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(omap4_v1v8_supply),
+	.consumer_supplies	= omap4_v1v8_supply,
+};
+
+static struct regulator_consumer_supply omap4_v2v1_supply[] = {
+	REGULATOR_SUPPLY("v2v1", "1-004b"),
+};
+
+static struct regulator_init_data omap4_v2v1_idata = {
+	.constraints = {
+		.min_uV			= 2100000,
+		.max_uV			= 2100000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(omap4_v2v1_supply),
+	.consumer_supplies	= omap4_v2v1_supply,
+};
+
 void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
 				  u32 pdata_flags, u32 regulators_flags)
 {
@@ -318,6 +484,24 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
 	if (!pmic_data->irq_end)
 		pmic_data->irq_end = TWL6030_IRQ_END;
 
+	if (!pmic_data->vdd1) {
+		omap4_vdd1.driver_data = &omap4_vdd1_drvdata;
+		omap4_vdd1_drvdata.data = voltdm_lookup("mpu");
+		pmic_data->vdd1 = &omap4_vdd1;
+	}
+
+	if (!pmic_data->vdd2) {
+		omap4_vdd2.driver_data = &omap4_vdd2_drvdata;
+		omap4_vdd2_drvdata.data = voltdm_lookup("iva");
+		pmic_data->vdd2 = &omap4_vdd2;
+	}
+
+	if (!pmic_data->vdd3) {
+		omap4_vdd3.driver_data = &omap4_vdd3_drvdata;
+		omap4_vdd3_drvdata.data = voltdm_lookup("core");
+		pmic_data->vdd3 = &omap4_vdd3;
+	}
+
 	/* Common platform data configurations */
 	if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
 		pmic_data->usb = &omap4_usb_pdata;
@@ -350,5 +534,11 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
 	if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG &&
 	    !pmic_data->clk32kg)
 		pmic_data->clk32kg = &omap4_clk32kg_idata;
+
+	if (regulators_flags & TWL_COMMON_REGULATOR_V1V8 && !pmic_data->v1v8)
+		pmic_data->v1v8 = &omap4_v1v8_idata;
+
+	if (regulators_flags & TWL_COMMON_REGULATOR_V2V1 && !pmic_data->v2v1)
+		pmic_data->v2v1 = &omap4_v2v1_idata;
 }
 #endif /* CONFIG_ARCH_OMAP4 */
diff --git a/trunk/arch/arm/mach-omap2/twl-common.h b/trunk/arch/arm/mach-omap2/twl-common.h
index 09627483a57f..8fe71cfd002c 100644
--- a/trunk/arch/arm/mach-omap2/twl-common.h
+++ b/trunk/arch/arm/mach-omap2/twl-common.h
@@ -22,6 +22,8 @@
 #define TWL_COMMON_REGULATOR_VCXIO	(1 << 8)
 #define TWL_COMMON_REGULATOR_VUSB	(1 << 9)
 #define TWL_COMMON_REGULATOR_CLK32KG	(1 << 10)
+#define TWL_COMMON_REGULATOR_V1V8	(1 << 11)
+#define TWL_COMMON_REGULATOR_V2V1	(1 << 12)
 
 /* TWL4030 LDO regulators */
 #define TWL_COMMON_REGULATOR_VPLL1	(1 << 4)
diff --git a/trunk/arch/arm/mach-omap2/vc3xxx_data.c b/trunk/arch/arm/mach-omap2/vc3xxx_data.c
index a5ec7f8f2ea8..5d8eaf31569c 100644
--- a/trunk/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/trunk/arch/arm/mach-omap2/vc3xxx_data.c
@@ -46,6 +46,7 @@ static struct omap_vc_common omap3_vc_common = {
 };
 
 struct omap_vc_channel omap3_vc_mpu = {
+	.flags = OMAP_VC_CHANNEL_DEFAULT,
 	.common = &omap3_vc_common,
 	.smps_sa_reg	 = OMAP3_PRM_VC_SMPS_SA_OFFSET,
 	.smps_volra_reg	 = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
diff --git a/trunk/arch/arm/mach-omap2/voltage.c b/trunk/arch/arm/mach-omap2/voltage.c
index 8a36342e60d2..4dc60e83e00d 100644
--- a/trunk/arch/arm/mach-omap2/voltage.c
+++ b/trunk/arch/arm/mach-omap2/voltage.c
@@ -73,7 +73,8 @@ unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
 int voltdm_scale(struct voltagedomain *voltdm,
 		 unsigned long target_volt)
 {
-	int ret;
+	int ret, i;
+	unsigned long volt = 0;
 
 	if (!voltdm || IS_ERR(voltdm)) {
 		pr_warning("%s: VDD specified does not exist!\n", __func__);
@@ -86,9 +87,23 @@ int voltdm_scale(struct voltagedomain *voltdm,
 		return -ENODATA;
 	}
 
-	ret = voltdm->scale(voltdm, target_volt);
+	/* Adjust voltage to the exact voltage from the OPP table */
+	for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
+		if (voltdm->volt_data[i].volt_nominal >= target_volt) {
+			volt = voltdm->volt_data[i].volt_nominal;
+			break;
+		}
+	}
+
+	if (!volt) {
+		pr_warning("%s: not scaling. OPP voltage for %lu, not found.\n",
+			   __func__, target_volt);
+		return -EINVAL;
+	}
+
+	ret = voltdm->scale(voltdm, volt);
 	if (!ret)
-		voltdm->nominal_volt = target_volt;
+		voltdm->nominal_volt = volt;
 
 	return ret;
 }
diff --git a/trunk/arch/arm/mach-pxa/hx4700.c b/trunk/arch/arm/mach-pxa/hx4700.c
index b83b95a29503..6bd692d271c1 100644
--- a/trunk/arch/arm/mach-pxa/hx4700.c
+++ b/trunk/arch/arm/mach-pxa/hx4700.c
@@ -102,6 +102,10 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS_LPM_LOW,
 
+	/* STUART (IRDA) */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
 	/* PWM 1 (Backlight) */
 	GPIO17_PWM1_OUT,
 
@@ -125,7 +129,7 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO88_GPIO,
 
 	/* HX4700 specific input GPIOs */
-	GPIO12_GPIO,	/* ASIC3_IRQ */
+	GPIO12_GPIO | WAKEUP_ON_EDGE_RISE,	/* ASIC3_IRQ */
 	GPIO13_GPIO,	/* W3220_IRQ */
 	GPIO14_GPIO,	/* nWLAN_IRQ */
 
@@ -227,7 +231,6 @@ static u16 asic3_gpio_config[] = {
 	ASIC3_GPIOC0_LED0,		/* red */
 	ASIC3_GPIOC1_LED1,		/* green */
 	ASIC3_GPIOC2_LED2,		/* blue */
-	ASIC3_GPIOC4_CF_nCD,
 	ASIC3_GPIOC5_nCIOW,
 	ASIC3_GPIOC6_nCIOR,
 	ASIC3_GPIOC7_nPCE_1,
@@ -241,6 +244,7 @@ static u16 asic3_gpio_config[] = {
 	ASIC3_GPIOC15_nPIOR,
 
 	/* GPIOD: input GPIOs, CF */
+	ASIC3_GPIOD4_CF_nCD,
 	ASIC3_GPIOD11_nCIOIS16,
 	ASIC3_GPIOD12_nCWAIT,
 	ASIC3_GPIOD15_nPIOW,
@@ -291,6 +295,7 @@ static struct asic3_platform_data asic3_platform_data = {
 	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
 	.irq_base        = IRQ_BOARD_START,
 	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
+	.clock_rate      = 4000000,
 	.leds            = asic3_leds,
 };
 
@@ -859,6 +864,7 @@ static void __init hx4700_init(void)
 	int ret;
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
+	gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
 	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
 	if (ret)
 		pr_err ("hx4700: Failed to request GPIOs.\n");
diff --git a/trunk/arch/arm/mach-pxa/include/mach/mioa701.h b/trunk/arch/arm/mach-pxa/include/mach/mioa701.h
index 02868447b0b1..e57f5c724e8a 100644
--- a/trunk/arch/arm/mach-pxa/include/mach/mioa701.h
+++ b/trunk/arch/arm/mach-pxa/include/mach/mioa701.h
@@ -61,6 +61,9 @@
 #define GPIO93_KEY_VOLUME_UP			93
 #define GPIO94_KEY_VOLUME_DOWN			94
 
+/* Camera */
+#define GPIO56_MT9M111_nOE			56
+
 extern struct input_dev *mioa701_evdev;
 extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
 
diff --git a/trunk/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/trunk/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
index d72791695b26..0260aaa2fc17 100644
--- a/trunk/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ b/trunk/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -31,7 +31,6 @@
 #define PCM990_CTRL_INT_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
 #define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 #define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
-#define PCM990_CTRL_BASE		0xea000000
 #define PCM990_CTRL_SIZE		(1*1024*1024)
 
 #define PCM990_CTRL_PWR_IRQ_GPIO	14
@@ -69,13 +68,13 @@
 #define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
 #define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
 
-#define PCM990_CTRL_REG6	0x000C	/* Interrupt Clear REGISTER */
+#define PCM990_CTRL_INTSETCLR	0x000C	/* Interrupt Clear REGISTER */
 #define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
 #define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
 #define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
 #define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
 
-#define PCM990_CTRL_REG7	0x000E	/* Interrupt Enable REGISTER */
+#define PCM990_CTRL_INTMSKENA	0x000E	/* Interrupt Enable REGISTER */
 #define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
 #define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
 #define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
@@ -102,32 +101,6 @@
 #define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
 #define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
 
-#define PCM990_CTRL_P2V(x)	((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
-#define PCM990_CTRL_V2P(x)	((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __PCM990_CTRL_REG(x) \
-		(*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
-#else
-#  define __PCM990_CTRL_REG(x)	PCM990_CTRL_P2V(x)
-#endif
-
-#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL0	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
-#define PCM990_CTRL1	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
-#define PCM990_CTRL2	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
-#define PCM990_CTRL3	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
-#define PCM990_CTRL4	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
-#define PCM990_CTRL5	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
-#define PCM990_CTRL6	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL7	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_CTRL8	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
-#define PCM990_CTRL9	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
-#define PCM990_CTRL10	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
-#define PCM990_CTRL11	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
-
-
 /*
  * IDE
  */
@@ -166,24 +139,6 @@
 #define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
 #define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
 
-#ifndef __ASSEMBLY__
-# define  __PCM990_IDE_PLD_REG(x) \
-	(*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
-#else
-# define  __PCM990_IDE_PLD_REG(x)	PCM990_IDE_PLD_P2V(x)
-#endif
-
-#define PCM990_IDE0 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
-#define PCM990_IDE1 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
-#define PCM990_IDE2 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
-#define PCM990_IDE3 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
-#define PCM990_IDE4 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
-
 /*
  * Compact Flash
  */
@@ -196,10 +151,6 @@
 #define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
 
 #define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
-#define PCM990_CF_PLD_BASE	0xef000000
-#define PCM990_CF_PLD_SIZE	(1*1024*1024)
-#define PCM990_CF_PLD_P2V(x)	((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
-#define PCM990_CF_PLD_V2P(x)	((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
 
 /* visible CPLD (U6) registers */
 #define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
@@ -239,21 +190,6 @@
 #define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
 #define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
 
-#ifndef __ASSEMBLY__
-#  define  __PCM990_CF_PLD_REG(x) \
-	(*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
-#else
-#  define  __PCM990_CF_PLD_REG(x)	PCM990_CF_PLD_P2V(x)
-#endif
-
-#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
-#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
-#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
-#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
-#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
-#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
-#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
-
 /*
  * Wolfson AC97 Touch
  */
diff --git a/trunk/arch/arm/mach-pxa/mioa701.c b/trunk/arch/arm/mach-pxa/mioa701.c
index 061d57009cee..929c62b47b76 100644
--- a/trunk/arch/arm/mach-pxa/mioa701.c
+++ b/trunk/arch/arm/mach-pxa/mioa701.c
@@ -103,6 +103,7 @@ static unsigned long mioa701_pin_config[] = {
 	GPIO82_CIF_DD_5,
 	GPIO84_CIF_FV,
 	GPIO85_CIF_LV,
+	MIO_CFG_OUT(GPIO56_MT9M111_nOE, AF0, DRIVE_LOW),
 
 	/* Bluetooth */
 	MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
@@ -705,6 +706,7 @@ static struct gpio global_gpios[] = {
 	{ GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" },
 	{ GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" },
 	{ GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" },
+	{ GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
 };
 
 static void __init mioa701_machine_init(void)
diff --git a/trunk/arch/arm/mach-pxa/pcm990-baseboard.c b/trunk/arch/arm/mach-pxa/pcm990-baseboard.c
index abab4e2b122c..cb723e84bc27 100644
--- a/trunk/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/trunk/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -65,6 +65,18 @@ static unsigned long pcm990_pin_config[] __initdata = {
 	GPIO31_AC97_SYNC,
 };
 
+static void __iomem *pcm990_cpld_base;
+
+static u8 pcm990_cpld_readb(unsigned int reg)
+{
+	return readb(pcm990_cpld_base + reg);
+}
+
+static void pcm990_cpld_writeb(u8 value, unsigned int reg)
+{
+	writeb(value, pcm990_cpld_base + reg);
+}
+
 /*
  * pcm990_lcd_power - control power supply to the LCD
  * @on: 0 = switch off, 1 = switch on
@@ -78,13 +90,13 @@ static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
 		/* enable LCD-Latches
 		 * power on LCD
 		 */
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) =
-			PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON;
+		pcm990_cpld_writeb(PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON,
+				PCM990_CTRL_REG3);
 	} else {
 		/* disable LCD-Latches
 		 * power off LCD
 		 */
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) = 0x00;
+		pcm990_cpld_writeb(0, PCM990_CTRL_REG3);
 	}
 }
 #endif
@@ -243,15 +255,26 @@ static unsigned long pcm990_irq_enabled;
 static void pcm990_mask_ack_irq(struct irq_data *d)
 {
 	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-	PCM990_INTMSKENA = (pcm990_irq_enabled &= ~(1 << pcm990_irq));
+
+	pcm990_irq_enabled &= ~(1 << pcm990_irq);
+
+	pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
 }
 
 static void pcm990_unmask_irq(struct irq_data *d)
 {
 	int pcm990_irq = (d->irq - PCM027_IRQ(0));
+	u8 val;
+
 	/* the irq can be acknowledged only if deasserted, so it's done here */
-	PCM990_INTSETCLR |= 1 << pcm990_irq;
-	PCM990_INTMSKENA  = (pcm990_irq_enabled |= (1 << pcm990_irq));
+
+	pcm990_irq_enabled |= (1 << pcm990_irq);
+
+	val = pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
+	val |= 1 << pcm990_irq;
+	pcm990_cpld_writeb(val, PCM990_CTRL_INTSETCLR);
+
+	pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
 }
 
 static struct irq_chip pcm990_irq_chip = {
@@ -261,7 +284,10 @@ static struct irq_chip pcm990_irq_chip = {
 
 static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
-	unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
+	unsigned long pending;
+
+	pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
+	pending &= pcm990_irq_enabled;
 
 	do {
 		/* clear our parent IRQ */
@@ -270,7 +296,8 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
 			irq = PCM027_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
 		}
-		pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
+		pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
+		pending &= pcm990_irq_enabled;
 	} while (pending);
 }
 
@@ -285,8 +312,9 @@ static void __init pcm990_init_irq(void)
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
-	PCM990_INTMSKENA = 0x00;	/* disable all Interrupts */
-	PCM990_INTSETCLR = 0xFF;
+	/* disable all Interrupts */
+	pcm990_cpld_writeb(0x0, PCM990_CTRL_INTMSKENA);
+	pcm990_cpld_writeb(0xff, PCM990_CTRL_INTSETCLR);
 
 	irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
 	irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
@@ -309,13 +337,16 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data *p_d = dev->platform_data;
+	u8 val;
+
+	val = pcm990_cpld_readb(PCM990_CTRL_REG5);
 
 	if ((1 << vdd) & p_d->ocr_mask)
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
-						PCM990_CTRL_MMC2PWR;
+		val |= PCM990_CTRL_MMC2PWR;
 	else
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
-						~PCM990_CTRL_MMC2PWR;
+		val &= ~PCM990_CTRL_MMC2PWR;
+
+	pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
 }
 
 static void pcm990_mci_exit(struct device *dev, void *data)
@@ -480,23 +511,6 @@ static struct platform_device pcm990_camera[] = {
 };
 #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
 
-/*
- * enable generic access to the base board control CPLDs U6 and U7
- */
-static struct map_desc pcm990_io_desc[] __initdata = {
-	{
-		.virtual	= PCM990_CTRL_BASE,
-		.pfn		= __phys_to_pfn(PCM990_CTRL_PHYS),
-		.length		= PCM990_CTRL_SIZE,
-		.type		= MT_DEVICE	/* CPLD */
-	}, {
-		.virtual	= PCM990_CF_PLD_BASE,
-		.pfn		= __phys_to_pfn(PCM990_CF_PLD_PHYS),
-		.length		= PCM990_CF_PLD_SIZE,
-		.type		= MT_DEVICE	/* CPLD */
-	}
-};
-
 /*
  * system init for baseboard usage. Will be called by pcm027 init.
  *
@@ -507,8 +521,11 @@ void __init pcm990_baseboard_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
 
-	/* register CPLD access */
-	iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
+	pcm990_cpld_base = ioremap(PCM990_CTRL_PHYS, PCM990_CTRL_SIZE);
+	if (!pcm990_cpld_base) {
+		pr_err("pcm990: failed to ioremap cpld\n");
+		return;
+	}
 
 	/* register CPLD's IRQ controller */
 	pcm990_init_irq();
diff --git a/trunk/arch/arm/mach-s3c64xx/mach-crag6410.c b/trunk/arch/arm/mach-s3c64xx/mach-crag6410.c
index e20bf5835365..7dce84b61a27 100644
--- a/trunk/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/trunk/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -306,6 +306,24 @@ static struct regulator_consumer_supply wallvdd_consumers[] = {
 	REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
+
+	REGULATOR_SUPPLY("DC1VDD", "0-0034"),
+	REGULATOR_SUPPLY("DC2VDD", "0-0034"),
+	REGULATOR_SUPPLY("DC3VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO1VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO2VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO4VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO5VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO6VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO7VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO8VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO9VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO10VDD", "0-0034"),
+	REGULATOR_SUPPLY("LDO11VDD", "0-0034"),
+
+	REGULATOR_SUPPLY("DC1VDD", "1-0034"),
+	REGULATOR_SUPPLY("DC2VDD", "1-0034"),
+	REGULATOR_SUPPLY("DC3VDD", "1-0034"),
 };
 
 static struct regulator_init_data wallvdd_data = {
diff --git a/trunk/arch/arm/mach-shmobile/board-ap4evb.c b/trunk/arch/arm/mach-shmobile/board-ap4evb.c
index b56dde2732bb..0c3caeba2f3e 100644
--- a/trunk/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/trunk/arch/arm/mach-shmobile/board-ap4evb.c
@@ -997,6 +997,8 @@ static struct sh_mobile_ceu_companion csi2 = {
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+	.max_width = 8188,
+	.max_height = 8188,
 	.csi2 = &csi2,
 };
 
diff --git a/trunk/arch/arm/mach-shmobile/board-bonito.c b/trunk/arch/arm/mach-shmobile/board-bonito.c
index 81fd95f7f52a..63ab7062bee3 100644
--- a/trunk/arch/arm/mach-shmobile/board-bonito.c
+++ b/trunk/arch/arm/mach-shmobile/board-bonito.c
@@ -486,7 +486,7 @@ static void __init bonito_earlytimer_init(void)
 	shmobile_earlytimer_init();
 }
 
-void __init bonito_add_early_devices(void)
+static void __init bonito_add_early_devices(void)
 {
 	r8a7740_add_early_devices();
 
diff --git a/trunk/arch/arm/mach-shmobile/board-mackerel.c b/trunk/arch/arm/mach-shmobile/board-mackerel.c
index 8c6202bb6aeb..aae2e24fde46 100644
--- a/trunk/arch/arm/mach-shmobile/board-mackerel.c
+++ b/trunk/arch/arm/mach-shmobile/board-mackerel.c
@@ -908,6 +908,8 @@ static int fsi_b_set_rate(struct device *dev, int rate, int enable)
 static struct sh_fsi_platform_info fsi_info = {
 	.port_a = {
 		.flags = SH_FSI_BRS_INV,
+		.tx_id = SHDMA_SLAVE_FSIA_TX,
+		.rx_id = SHDMA_SLAVE_FSIA_RX,
 	},
 	.port_b = {
 		.flags = SH_FSI_BRS_INV	|
@@ -920,9 +922,11 @@ static struct sh_fsi_platform_info fsi_info = {
 
 static struct resource fsi_resources[] = {
 	[0] = {
+		/* we need 0xFE1F0000 to access DMA
+		 * instead of 0xFE3C0000 */
 		.name	= "FSI",
-		.start	= 0xFE3C0000,
-		.end	= 0xFE3C0400 - 1,
+		.start  = 0xFE1F0000,
+		.end    = 0xFE1F0400 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1248,6 +1252,8 @@ static void mackerel_camera_del(struct soc_camera_device *icd)
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+	.max_width = 8188,
+	.max_height = 8188,
 };
 
 static struct resource ceu_resources[] = {
diff --git a/trunk/drivers/pcmcia/Kconfig b/trunk/drivers/pcmcia/Kconfig
index bba3ab2066ee..8fd255f7ee40 100644
--- a/trunk/drivers/pcmcia/Kconfig
+++ b/trunk/drivers/pcmcia/Kconfig
@@ -217,7 +217,7 @@ config PCMCIA_PXA2XX
 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
 		    || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
 		    || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
-		    || MACH_COLIBRI320)
+		    || MACH_COLIBRI320 || MACH_H4700)
 	select PCMCIA_SA1111 if ARCH_LUBBOCK && SA1111
 	select PCMCIA_SOC_COMMON
 	help
diff --git a/trunk/drivers/pcmcia/Makefile b/trunk/drivers/pcmcia/Makefile
index 47525de6a631..7745b512a87c 100644
--- a/trunk/drivers/pcmcia/Makefile
+++ b/trunk/drivers/pcmcia/Makefile
@@ -69,6 +69,7 @@ pxa2xx-obj-$(CONFIG_MACH_VPAC270)		+= pxa2xx_vpac270.o
 pxa2xx-obj-$(CONFIG_MACH_BALLOON3)		+= pxa2xx_balloon3.o
 pxa2xx-obj-$(CONFIG_MACH_COLIBRI)		+= pxa2xx_colibri.o
 pxa2xx-obj-$(CONFIG_MACH_COLIBRI320)		+= pxa2xx_colibri.o
+pxa2xx-obj-$(CONFIG_MACH_H4700)			+= pxa2xx_hx4700.o
 
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_base.o $(pxa2xx-obj-y)
 
diff --git a/trunk/drivers/pcmcia/pxa2xx_hx4700.c b/trunk/drivers/pcmcia/pxa2xx_hx4700.c
new file mode 100644
index 000000000000..7dfef3ee5b53
--- /dev/null
+++ b/trunk/drivers/pcmcia/pxa2xx_hx4700.c
@@ -0,0 +1,121 @@
+/*
+ *  Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <mach/hx4700.h>
+
+#include "soc_common.h"
+
+static struct gpio gpios[] = {
+	{ GPIO114_HX4700_CF_RESET,    GPIOF_OUT_INIT_LOW,   "CF reset"        },
+	{ EGPIO4_CF_3V3_ON,           GPIOF_OUT_INIT_LOW,   "CF 3.3V enable"  },
+};
+
+static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	int ret;
+
+	ret = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+	if (ret)
+		goto out;
+
+	/*
+	 * IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
+	 * The asic3 default IRQ type is level trigger low level detect, exactly
+	 * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+	 * If the IRQ type is not changed, the asic3 interrupt handler will loop
+	 * repeatedly because it is unable to clear the level trigger interrupt.
+	 */
+	irq_set_irq_type(gpio_to_irq(GPIOD4_CF_nCD), IRQ_TYPE_EDGE_BOTH);
+
+	skt->stat[SOC_STAT_CD].gpio = GPIOD4_CF_nCD;
+	skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
+	skt->stat[SOC_STAT_RDY].gpio = GPIO60_HX4700_CF_RNB;
+	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
+
+out:
+	return ret;
+}
+
+static void hx4700_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	gpio_free_array(gpios, ARRAY_SIZE(gpios));
+}
+
+static void hx4700_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+	struct pcmcia_state *state)
+{
+	state->vs_3v = 1;
+	state->vs_Xv = 0;
+}
+
+static int hx4700_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+	const socket_state_t *state)
+{
+	switch (state->Vcc) {
+	case 0:
+		gpio_set_value(EGPIO4_CF_3V3_ON, 0);
+		break;
+	case 33:
+		gpio_set_value(EGPIO4_CF_3V3_ON, 1);
+		break;
+	default:
+		printk(KERN_ERR "pcmcia: Unsupported Vcc: %d\n", state->Vcc);
+		return -EINVAL;
+	}
+
+	gpio_set_value(GPIO114_HX4700_CF_RESET, (state->flags & SS_RESET) != 0);
+
+	return 0;
+}
+
+static struct pcmcia_low_level hx4700_pcmcia_ops = {
+	.owner          = THIS_MODULE,
+	.nr             = 1,
+	.hw_init        = hx4700_pcmcia_hw_init,
+	.hw_shutdown    = hx4700_pcmcia_hw_shutdown,
+	.socket_state   = hx4700_pcmcia_socket_state,
+	.configure_socket = hx4700_pcmcia_configure_socket,
+};
+
+static struct platform_device *hx4700_pcmcia_device;
+
+static int __init hx4700_pcmcia_init(void)
+{
+	struct platform_device *pdev;
+
+	if (!machine_is_h4700())
+		return -ENODEV;
+
+	pdev = platform_device_register_data(NULL, "pxa2xx-pcmcia", -1,
+		&hx4700_pcmcia_ops, sizeof(hx4700_pcmcia_ops));
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	hx4700_pcmcia_device = pdev;
+
+	return 0;
+}
+
+static void __exit hx4700_pcmcia_exit(void)
+{
+	platform_device_unregister(hx4700_pcmcia_device);
+}
+
+module_init(hx4700_pcmcia_init);
+module_exit(hx4700_pcmcia_exit);
+
+MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
+MODULE_DESCRIPTION("HP iPAQ hx4700 PCMCIA driver");
+MODULE_LICENSE("GPL");
diff --git a/trunk/include/linux/mfd/asic3.h b/trunk/include/linux/mfd/asic3.h
index ed793b77a1c5..ef6faa5cee46 100644
--- a/trunk/include/linux/mfd/asic3.h
+++ b/trunk/include/linux/mfd/asic3.h
@@ -138,6 +138,7 @@ struct asic3_platform_data {
 #define ASIC3_GPIOC13_nPWAIT		ASIC3_CONFIG_GPIO(45, 1, 1, 0)
 #define ASIC3_GPIOC14_nPIOIS16		ASIC3_CONFIG_GPIO(46, 1, 1, 0)
 #define ASIC3_GPIOC15_nPIOR		ASIC3_CONFIG_GPIO(47, 1, 0, 0)
+#define ASIC3_GPIOD4_CF_nCD		ASIC3_CONFIG_GPIO(52, 1, 0, 0)
 #define ASIC3_GPIOD11_nCIOIS16		ASIC3_CONFIG_GPIO(59, 1, 0, 0)
 #define ASIC3_GPIOD12_nCWAIT		ASIC3_CONFIG_GPIO(60, 1, 0, 0)
 #define ASIC3_GPIOD15_nPIOW		ASIC3_CONFIG_GPIO(63, 1, 0, 0)
diff --git a/trunk/include/linux/ti_wilink_st.h b/trunk/include/linux/ti_wilink_st.h
index 2ef4385da6bf..3ca0269dd0b5 100644
--- a/trunk/include/linux/ti_wilink_st.h
+++ b/trunk/include/linux/ti_wilink_st.h
@@ -25,6 +25,8 @@
 #ifndef TI_WILINK_ST_H
 #define TI_WILINK_ST_H
 
+#include <linux/skbuff.h>
+
 /**
  * enum proto-type - The protocol on WiLink chips which share a
  *	common physical interface like UART.