diff --git a/[refs] b/[refs] index 7581547c226b..654988bdabaf 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 8af088710d1eb3c980e0ef3779c8d47f3f217b48 +refs/heads/master: 19426a8f810752b4218e59b1e2187f33e255f7bc diff --git a/trunk/.gitignore b/trunk/.gitignore index 5d56a3fd0de6..9dacde0a4b2d 100644 --- a/trunk/.gitignore +++ b/trunk/.gitignore @@ -57,6 +57,7 @@ modules.builtin include/config include/linux/version.h include/generated +arch/*/include/generated # stgit generated dirs patches-* diff --git a/trunk/CREDITS b/trunk/CREDITS index 95c469c610bc..58d2a02add39 100644 --- a/trunk/CREDITS +++ b/trunk/CREDITS @@ -2943,6 +2943,10 @@ S: Kasarmikatu 11 A4 S: 70110 Kuopio S: Finland +N: Tobias Ringström +E: tori@unhappy.mine.nu +D: Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver + N: Luca Risolia E: luca.risolia@studio.unibo.it P: 1024D/FCE635A4 88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4 diff --git a/trunk/Documentation/DocBook/Makefile b/trunk/Documentation/DocBook/Makefile index 8436b018c289..3cebfa0d1611 100644 --- a/trunk/Documentation/DocBook/Makefile +++ b/trunk/Documentation/DocBook/Makefile @@ -73,7 +73,7 @@ installmandocs: mandocs ### #External programs used KERNELDOC = $(srctree)/scripts/kernel-doc -DOCPROC = $(objtree)/scripts/basic/docproc +DOCPROC = $(objtree)/scripts/docproc XMLTOFLAGS = -m $(srctree)/Documentation/DocBook/stylesheet.xsl XMLTOFLAGS += --skip-validation diff --git a/trunk/Documentation/IRQ-affinity.txt b/trunk/Documentation/IRQ-affinity.txt index b4a615b78403..7890fae18529 100644 --- a/trunk/Documentation/IRQ-affinity.txt +++ b/trunk/Documentation/IRQ-affinity.txt @@ -4,10 +4,11 @@ ChangeLog: SMP IRQ affinity -/proc/irq/IRQ#/smp_affinity specifies which target CPUs are permitted -for a given IRQ source. It's a bitmask of allowed CPUs. It's not allowed -to turn off all CPUs, and if an IRQ controller does not support IRQ -affinity then the value will not change from the default 0xffffffff. +/proc/irq/IRQ#/smp_affinity and /proc/irq/IRQ#/smp_affinity_list specify +which target CPUs are permitted for a given IRQ source. It's a bitmask +(smp_affinity) or cpu list (smp_affinity_list) of allowed CPUs. It's not +allowed to turn off all CPUs, and if an IRQ controller does not support +IRQ affinity then the value will not change from the default of all cpus. /proc/irq/default_smp_affinity specifies default affinity mask that applies to all non-active IRQs. Once IRQ is allocated/activated its affinity bitmask @@ -54,3 +55,11 @@ round-trip min/avg/max = 0.1/0.5/585.4 ms This time around IRQ44 was delivered only to the last four processors. i.e counters for the CPU0-3 did not change. +Here is an example of limiting that same irq (44) to cpus 1024 to 1031: + +[root@moon 44]# echo 1024-1031 > smp_affinity +[root@moon 44]# cat smp_affinity +1024-1031 + +Note that to do this with a bitmask would require 32 bitmasks of zero +to follow the pertinent one. diff --git a/trunk/Documentation/cachetlb.txt b/trunk/Documentation/cachetlb.txt index 9164ae3b83bc..9b728dc17535 100644 --- a/trunk/Documentation/cachetlb.txt +++ b/trunk/Documentation/cachetlb.txt @@ -16,7 +16,7 @@ on all processors in the system. Don't let this scare you into thinking SMP cache/tlb flushing must be so inefficient, this is in fact an area where many optimizations are possible. For example, if it can be proven that a user address space has never executed -on a cpu (see vma->cpu_vm_mask), one need not perform a flush +on a cpu (see mm_cpumask()), one need not perform a flush for this address space on that cpu. First, the TLB flushing interfaces, since they are the simplest. The diff --git a/trunk/Documentation/filesystems/proc.txt b/trunk/Documentation/filesystems/proc.txt index 60740e8ecb37..f48178024067 100644 --- a/trunk/Documentation/filesystems/proc.txt +++ b/trunk/Documentation/filesystems/proc.txt @@ -574,6 +574,12 @@ The contents of each smp_affinity file is the same by default: > cat /proc/irq/0/smp_affinity ffffffff +There is an alternate interface, smp_affinity_list which allows specifying +a cpu range instead of a bitmask: + + > cat /proc/irq/0/smp_affinity_list + 1024-1031 + The default_smp_affinity mask applies to all non-active IRQs, which are the IRQs which have not yet been allocated/activated, and hence which lack a /proc/irq/[0-9]* directory. @@ -583,12 +589,13 @@ reports itself as being attached. This hardware locality information does not include information about any possible driver locality preference. prof_cpu_mask specifies which CPUs are to be profiled by the system wide -profiler. Default value is ffffffff (all cpus). +profiler. Default value is ffffffff (all cpus if there are only 32 of them). The way IRQs are routed is handled by the IO-APIC, and it's Round Robin between all the CPUs which are allowed to handle it. As usual the kernel has more info than you and does a better job than you, so the defaults are the -best choice for almost everyone. +best choice for almost everyone. [Note this applies only to those IO-APIC's +that support "Round Robin" interrupt distribution.] There are three more important subdirectories in /proc: net, scsi, and sys. The general rule is that the contents, or even the existence of these diff --git a/trunk/Documentation/filesystems/ubifs.txt b/trunk/Documentation/filesystems/ubifs.txt index d7b13b01e980..8e4fab639d9c 100644 --- a/trunk/Documentation/filesystems/ubifs.txt +++ b/trunk/Documentation/filesystems/ubifs.txt @@ -115,28 +115,8 @@ ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs Module Parameters for Debugging =============================== -When UBIFS has been compiled with debugging enabled, there are 3 module +When UBIFS has been compiled with debugging enabled, there are 2 module parameters that are available to control aspects of testing and debugging. -The parameters are unsigned integers where each bit controls an option. -The parameters are: - -debug_msgs Selects which debug messages to display, as follows: - - Message Type Flag value - - General messages 1 - Journal messages 2 - Mount messages 4 - Commit messages 8 - LEB search messages 16 - Budgeting messages 32 - Garbage collection messages 64 - Tree Node Cache (TNC) messages 128 - LEB properties (lprops) messages 256 - Input/output messages 512 - Log messages 1024 - Scan messages 2048 - Recovery messages 4096 debug_chks Selects extra checks that UBIFS can do while running: @@ -154,11 +134,9 @@ debug_tsts Selects a mode of testing, as follows: Test mode Flag value - Force in-the-gaps method 2 Failure mode for recovery testing 4 -For example, set debug_msgs to 5 to display General messages and Mount -messages. +For example, set debug_chks to 3 to enable general and TNC checks. References diff --git a/trunk/Documentation/i2c/busses/i2c-i801 b/trunk/Documentation/i2c/busses/i2c-i801 index 6df69765ccb7..2871fd500349 100644 --- a/trunk/Documentation/i2c/busses/i2c-i801 +++ b/trunk/Documentation/i2c/busses/i2c-i801 @@ -19,6 +19,7 @@ Supported adapters: * Intel 6 Series (PCH) * Intel Patsburg (PCH) * Intel DH89xxCC (PCH) + * Intel Panther Point (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/trunk/Documentation/i2c/writing-clients b/trunk/Documentation/i2c/writing-clients index 5ebf5af1d716..5aa53374ea2a 100644 --- a/trunk/Documentation/i2c/writing-clients +++ b/trunk/Documentation/i2c/writing-clients @@ -38,7 +38,7 @@ static struct i2c_driver foo_driver = { .name = "foo", }, - .id_table = foo_ids, + .id_table = foo_idtable, .probe = foo_probe, .remove = foo_remove, /* if device autodetection is needed: */ diff --git a/trunk/Documentation/input/elantech.txt b/trunk/Documentation/input/elantech.txt index 56941ae1f5db..db798af5ef98 100644 --- a/trunk/Documentation/input/elantech.txt +++ b/trunk/Documentation/input/elantech.txt @@ -34,7 +34,8 @@ Contents Currently the Linux Elantech touchpad driver is aware of two different hardware versions unimaginatively called version 1 and version 2. Version 1 is found in "older" laptops and uses 4 bytes per packet. Version 2 seems to -be introduced with the EeePC and uses 6 bytes per packet. +be introduced with the EeePC and uses 6 bytes per packet, and provides +additional features such as position of two fingers, and width of the touch. The driver tries to support both hardware versions and should be compatible with the Xorg Synaptics touchpad driver and its graphical configuration @@ -94,18 +95,44 @@ Currently the Linux Elantech touchpad driver provides two extra knobs under can check these bits and reject any packet that appears corrupted. Using this knob you can bypass that check. - It is not known yet whether hardware version 2 provides the same parity - bits. Hence checking is disabled by default. Currently even turning it on - will do nothing. - + Hardware version 2 does not provide the same parity bits. Only some basic + data consistency checking can be done. For now checking is disabled by + default. Currently even turning it on will do nothing. ///////////////////////////////////////////////////////////////////////////// +3. Differentiating hardware versions + ================================= + +To detect the hardware version, read the version number as param[0].param[1].param[2] + + 4 bytes version: (after the arrow is the name given in the Dell-provided driver) + 02.00.22 => EF013 + 02.06.00 => EF019 +In the wild, there appear to be more versions, such as 00.01.64, 01.00.21, +02.00.00, 02.00.04, 02.00.06. + + 6 bytes: + 02.00.30 => EF113 + 02.08.00 => EF023 + 02.08.XX => EF123 + 02.0B.00 => EF215 + 04.01.XX => Scroll_EF051 + 04.02.XX => EF051 +In the wild, there appear to be more versions, such as 04.03.01, 04.04.11. There +appears to be almost no difference, except for EF113, which does not report +pressure/width and has different data consistency checks. + +Probably all the versions with param[0] <= 01 can be considered as +4 bytes/firmware 1. The versions < 02.08.00, with the exception of 02.00.30, as +4 bytes/firmware 2. Everything >= 02.08.00 can be considered as 6 bytes. + +///////////////////////////////////////////////////////////////////////////// -3. Hardware version 1 +4. Hardware version 1 ================== -3.1 Registers +4.1 Registers ~~~~~~~~~ By echoing a hexadecimal value to a register it contents can be altered. @@ -168,7 +195,7 @@ For example: smart edge activation area width? -3.2 Native relative mode 4 byte packet format +4.2 Native relative mode 4 byte packet format ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ byte 0: @@ -226,9 +253,13 @@ byte 3: positive = down -3.3 Native absolute mode 4 byte packet format +4.3 Native absolute mode 4 byte packet format ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +EF013 and EF019 have a special behaviour (due to a bug in the firmware?), and +when 1 finger is touching, the first 2 position reports must be discarded. +This counting is reset whenever a different number of fingers is reported. + byte 0: firmware version 1.x: @@ -279,11 +310,11 @@ byte 3: ///////////////////////////////////////////////////////////////////////////// -4. Hardware version 2 +5. Hardware version 2 ================== -4.1 Registers +5.1 Registers ~~~~~~~~~ By echoing a hexadecimal value to a register it contents can be altered. @@ -316,16 +347,41 @@ For example: 0x7f = never i.e. tap again to release) -4.2 Native absolute mode 6 byte packet format +5.2 Native absolute mode 6 byte packet format ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -4.2.1 One finger touch +5.2.1 Parity checking and packet re-synchronization +There is no parity checking, however some consistency checks can be performed. + +For instance for EF113: + SA1= packet[0]; + A1 = packet[1]; + B1 = packet[2]; + SB1= packet[3]; + C1 = packet[4]; + D1 = packet[5]; + if( (((SA1 & 0x3C) != 0x3C) && ((SA1 & 0xC0) != 0x80)) || // check Byte 1 + (((SA1 & 0x0C) != 0x0C) && ((SA1 & 0xC0) == 0x80)) || // check Byte 1 (one finger pressed) + (((SA1 & 0xC0) != 0x80) && (( A1 & 0xF0) != 0x00)) || // check Byte 2 + (((SB1 & 0x3E) != 0x38) && ((SA1 & 0xC0) != 0x80)) || // check Byte 4 + (((SB1 & 0x0E) != 0x08) && ((SA1 & 0xC0) == 0x80)) || // check Byte 4 (one finger pressed) + (((SA1 & 0xC0) != 0x80) && (( C1 & 0xF0) != 0x00)) ) // check Byte 5 + // error detected + +For all the other ones, there are just a few constant bits: + if( ((packet[0] & 0x0C) != 0x04) || + ((packet[3] & 0x0f) != 0x02) ) + // error detected + + +In case an error is detected, all the packets are shifted by one (and packet[0] is discarded). + +5.2.1 One/Three finger touch ~~~~~~~~~~~~~~~~ byte 0: bit 7 6 5 4 3 2 1 0 - n1 n0 . . . . R L + n1 n0 w3 w2 . . R L L, R = 1 when Left, Right mouse button pressed n1..n0 = numbers of fingers on touchpad @@ -333,24 +389,40 @@ byte 0: byte 1: bit 7 6 5 4 3 2 1 0 - . . . . . x10 x9 x8 + p7 p6 p5 p4 . x10 x9 x8 byte 2: bit 7 6 5 4 3 2 1 0 - x7 x6 x5 x4 x4 x2 x1 x0 + x7 x6 x5 x4 x3 x2 x1 x0 x10..x0 = absolute x value (horizontal) byte 3: bit 7 6 5 4 3 2 1 0 - . . . . . . . . + n4 vf w1 w0 . . . b2 + + n4 = set if more than 3 fingers (only in 3 fingers mode) + vf = a kind of flag ? (only on EF123, 0 when finger is over one + of the buttons, 1 otherwise) + w3..w0 = width of the finger touch (not EF113) + b2 (on EF113 only, 0 otherwise), b2.R.L indicates one button pressed: + 0 = none + 1 = Left + 2 = Right + 3 = Middle (Left and Right) + 4 = Forward + 5 = Back + 6 = Another one + 7 = Another one byte 4: bit 7 6 5 4 3 2 1 0 - . . . . . . y9 y8 + p3 p1 p2 p0 . . y9 y8 + + p7..p0 = pressure (not EF113) byte 5: @@ -363,6 +435,11 @@ byte 5: 4.2.2 Two finger touch ~~~~~~~~~~~~~~~~ +Note that the two pairs of coordinates are not exactly the coordinates of the +two fingers, but only the pair of the lower-left and upper-right coordinates. +So the actual fingers might be situated on the other diagonal of the square +defined by these two points. + byte 0: bit 7 6 5 4 3 2 1 0 @@ -376,14 +453,14 @@ byte 1: bit 7 6 5 4 3 2 1 0 ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 - ax8..ax0 = first finger absolute x value + ax8..ax0 = lower-left finger absolute x value byte 2: bit 7 6 5 4 3 2 1 0 ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 - ay8..ay0 = first finger absolute y value + ay8..ay0 = lower-left finger absolute y value byte 3: @@ -395,11 +472,11 @@ byte 4: bit 7 6 5 4 3 2 1 0 bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 - bx8..bx0 = second finger absolute x value + bx8..bx0 = upper-right finger absolute x value byte 5: bit 7 6 5 4 3 2 1 0 by7 by8 by5 by4 by3 by2 by1 by0 - by8..by0 = second finger absolute y value + by8..by0 = upper-right finger absolute y value diff --git a/trunk/Documentation/input/rotary-encoder.txt b/trunk/Documentation/input/rotary-encoder.txt index 943e8f6f2b15..92e68bce13a4 100644 --- a/trunk/Documentation/input/rotary-encoder.txt +++ b/trunk/Documentation/input/rotary-encoder.txt @@ -9,6 +9,9 @@ peripherals with two wires. The outputs are phase-shifted by 90 degrees and by triggering on falling and rising edges, the turn direction can be determined. +Some encoders have both outputs low in stable states, whereas others also have +a stable state with both outputs high (half-period mode). + The phase diagram of these two outputs look like this: _____ _____ _____ @@ -26,6 +29,8 @@ The phase diagram of these two outputs look like this: |<-------->| one step + |<-->| + one step (half-period mode) For more information, please see http://en.wikipedia.org/wiki/Rotary_encoder @@ -34,6 +39,13 @@ For more information, please see 1. Events / state machine ------------------------- +In half-period mode, state a) and c) above are used to determine the +rotational direction based on the last stable state. Events are reported in +states b) and d) given that the new stable state is different from the last +(i.e. the rotation was not reversed half-way). + +Otherwise, the following apply: + a) Rising edge on channel A, channel B in low state This state is used to recognize a clockwise turn @@ -96,6 +108,7 @@ static struct rotary_encoder_platform_data my_rotary_encoder_info = { .gpio_b = GPIO_ROTARY_B, .inverted_a = 0, .inverted_b = 0, + .half_period = false, }; static struct platform_device rotary_encoder_device = { diff --git a/trunk/Documentation/kbuild/kbuild.txt b/trunk/Documentation/kbuild/kbuild.txt index 7c2a89ba674c..68e32bb6bd80 100644 --- a/trunk/Documentation/kbuild/kbuild.txt +++ b/trunk/Documentation/kbuild/kbuild.txt @@ -201,3 +201,16 @@ KBUILD_ENABLE_EXTRA_GCC_CHECKS -------------------------------------------------- If enabled over the make command line with "W=1", it turns on additional gcc -W... options for more extensive build-time checking. + +KBUILD_BUILD_TIMESTAMP +-------------------------------------------------- +Setting this to a date string overrides the timestamp used in the +UTS_VERSION definition (uname -v in the running kernel). The value has to +be a string that can be passed to date -d. The default value +is the output of the date command at one point during build. + +KBUILD_BUILD_USER, KBUILD_BUILD_HOST +-------------------------------------------------- +These two variables allow to override the user@host string displayed during +boot and in /proc/version. The default value is the output of the commands +whoami and host, respectively. diff --git a/trunk/Documentation/kbuild/makefiles.txt b/trunk/Documentation/kbuild/makefiles.txt index 5d145bb443c0..47435e56c5da 100644 --- a/trunk/Documentation/kbuild/makefiles.txt +++ b/trunk/Documentation/kbuild/makefiles.txt @@ -40,11 +40,13 @@ This document describes the Linux kernel Makefiles. --- 6.6 Commands useful for building a boot image --- 6.7 Custom kbuild commands --- 6.8 Preprocessing linker scripts + --- 6.9 Generic header files === 7 Kbuild syntax for exported headers --- 7.1 header-y --- 7.2 objhdr-y --- 7.3 destination-y + --- 7.4 generic-y === 8 Kbuild Variables === 9 Makefile language @@ -499,6 +501,18 @@ more details, with real examples. gcc >= 3.00. For gcc < 3.00, -malign-functions=4 is used. Note: cc-option-align uses KBUILD_CFLAGS for $(CC) options + cc-disable-warning + cc-disable-warning checks if gcc supports a given warning and returns + the commandline switch to disable it. This special function is needed, + because gcc 4.4 and later accept any unknown -Wno-* option and only + warn about it if there is another warning in the source file. + + Example: + KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) + + In the above example, -Wno-unused-but-set-variable will be added to + KBUILD_CFLAGS only if gcc really accepts it. + cc-version cc-version returns a numerical version of the $(CC) compiler version. The format is where both are two digits. So for example @@ -955,6 +969,11 @@ When kbuild executes, the following steps are followed (roughly): used when linking modules. This is often a linker script. From commandline LDFLAGS_MODULE shall be used (see kbuild.txt). + KBUILD_ARFLAGS Options for $(AR) when creating archives + + $(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic + mode) if this option is supported by $(AR). + --- 6.2 Add prerequisites to archprepare: The archprepare: rule is used to list prerequisites that need to be @@ -1209,6 +1228,14 @@ When kbuild executes, the following steps are followed (roughly): The kbuild infrastructure for *lds file are used in several architecture-specific files. +--- 6.9 Generic header files + + The directory include/asm-generic contains the header files + that may be shared between individual architectures. + The recommended approach how to use a generic header file is + to list the file in the Kbuild file. + See "7.4 generic-y" for further info on syntax etc. + === 7 Kbuild syntax for exported headers The kernel include a set of headers that is exported to userspace. @@ -1265,6 +1292,32 @@ See subsequent chapter for the syntax of the Kbuild file. In the example above all exported headers in the Kbuild file will be located in the directory "include/linux" when exported. + --- 7.4 generic-y + + If an architecture uses a verbatim copy of a header from + include/asm-generic then this is listed in the file + arch/$(ARCH)/include/asm/Kbuild like this: + + Example: + #arch/x86/include/asm/Kbuild + generic-y += termios.h + generic-y += rtc.h + + During the prepare phase of the build a wrapper include + file is generated in the directory: + + arch/$(ARCH)/include/generated/asm + + When a header is exported where the architecture uses + the generic header a similar wrapper is generated as part + of the set of exported headers in the directory: + + usr/include/asm + + The generated wrapper will in both cases look like the following: + + Example: termios.h + #include === 8 Kbuild Variables diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt index 7c6624e7a5cb..5438a2d7907f 100644 --- a/trunk/Documentation/kernel-parameters.txt +++ b/trunk/Documentation/kernel-parameters.txt @@ -1777,9 +1777,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. nosoftlockup [KNL] Disable the soft-lockup detector. - noswapaccount [KNL] Disable accounting of swap in memory resource - controller. (See Documentation/cgroups/memory.txt) - nosync [HW,M68K] Disables sync negotiation for all devices. notsc [BUGS=X86-32] Disable Time Stamp Counter diff --git a/trunk/Documentation/lockstat.txt b/trunk/Documentation/lockstat.txt index 65f4c795015d..9c0a80d17a23 100644 --- a/trunk/Documentation/lockstat.txt +++ b/trunk/Documentation/lockstat.txt @@ -136,7 +136,7 @@ View the top contending locks: dcache_lock: 1037 1161 0.38 45.32 774.51 6611 243371 0.15 306.48 77387.24 &inode->i_mutex: 161 286 18446744073709 62882.54 1244614.55 3653 20598 18446744073709 62318.60 1693822.74 &zone->lru_lock: 94 94 0.53 7.33 92.10 4366 32690 0.29 59.81 16350.06 - &inode->i_data.i_mmap_lock: 79 79 0.40 3.77 53.03 11779 87755 0.28 116.93 29898.44 + &inode->i_data.i_mmap_mutex: 79 79 0.40 3.77 53.03 11779 87755 0.28 116.93 29898.44 &q->__queue_lock: 48 50 0.52 31.62 86.31 774 13131 0.17 113.08 12277.52 &rq->rq_lock_key: 43 47 0.74 68.50 170.63 3706 33929 0.22 107.99 17460.62 &rq->rq_lock_key#2: 39 46 0.75 6.68 49.03 2979 32292 0.17 125.17 17137.63 diff --git a/trunk/Documentation/virtual/uml/UserModeLinux-HOWTO.txt b/trunk/Documentation/virtual/uml/UserModeLinux-HOWTO.txt index 9b7e1904db1c..5d0fc8bfcdb9 100644 --- a/trunk/Documentation/virtual/uml/UserModeLinux-HOWTO.txt +++ b/trunk/Documentation/virtual/uml/UserModeLinux-HOWTO.txt @@ -1182,6 +1182,16 @@ forge.net/> and explains these in detail, as well as some other issues. + There is also a related point-to-point only "ucast" transport. + This is useful when your network does not support multicast, and + all network connections are simple point to point links. + + The full set of command line options for this transport are + + + ethn=ucast,ethernet address,remote address,listen port,remote port + + 66..66.. TTUUNN//TTAAPP wwiitthh tthhee uummll__nneett hheellppeerr diff --git a/trunk/Documentation/vm/locking b/trunk/Documentation/vm/locking index 25fadb448760..f61228bd6395 100644 --- a/trunk/Documentation/vm/locking +++ b/trunk/Documentation/vm/locking @@ -66,7 +66,7 @@ in some cases it is not really needed. Eg, vm_start is modified by expand_stack(), it is hard to come up with a destructive scenario without having the vmlist protection in this case. -The page_table_lock nests with the inode i_mmap_lock and the kmem cache +The page_table_lock nests with the inode i_mmap_mutex and the kmem cache c_spinlock spinlocks. This is okay, since the kmem code asks for pages after dropping c_spinlock. The page_table_lock also nests with pagecache_lock and pagemap_lru_lock spinlocks, and no code asks for memory with these locks diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index 0b415248ae25..59cd2f5a1122 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -2034,9 +2034,8 @@ F: net/ax25/ax25_timer.c F: net/ax25/sysctl_net_ax25.c DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER -M: Tobias Ringstrom L: netdev@vger.kernel.org -S: Maintained +S: Orphan F: Documentation/networking/dmfe.txt F: drivers/net/tulip/dmfe.c @@ -2245,10 +2244,10 @@ F: drivers/gpu/drm/ F: include/drm/ INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets) -M: Chris Wilson +M: Keith Packard L: intel-gfx@lists.freedesktop.org (subscribers-only) L: dri-devel@lists.freedesktop.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6.git S: Supported F: drivers/gpu/drm/i915 F: include/drm/i915* @@ -3898,7 +3897,6 @@ F: drivers/*/*/*pasemi* LINUX SECURITY MODULE (LSM) FRAMEWORK M: Chris Wright L: linux-security-module@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git S: Supported LIS3LV02D ACCELEROMETER DRIVER @@ -5592,10 +5590,11 @@ M: James Morris M: Eric Paris L: selinux@tycho.nsa.gov (subscribers-only, general discussion) W: http://selinuxproject.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git +T: git git://git.infradead.org/users/eparis/selinux.git S: Supported F: include/linux/selinux* F: security/selinux/ +F: scripts/selinux/ APPARMOR SECURITY MODULE M: John Johansen diff --git a/trunk/Makefile b/trunk/Makefile index a0344a81a893..6b73d1eed1ea 100644 --- a/trunk/Makefile +++ b/trunk/Makefile @@ -103,7 +103,7 @@ ifeq ("$(origin O)", "command line") endif ifeq ("$(origin W)", "command line") - export KBUILD_ENABLE_EXTRA_GCC_CHECKS := 1 + export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W) endif # That's our default target when none is given on the command line @@ -349,7 +349,8 @@ CFLAGS_GCOV = -fprofile-arcs -ftest-coverage # Use LINUXINCLUDE when you must reference the include/ directory. # Needed to be compatible with the O= option -LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include -Iinclude \ +LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include \ + -Iarch/$(hdr-arch)/include/generated -Iinclude \ $(if $(KBUILD_SRC), -I$(srctree)/include) \ -include include/generated/autoconf.h @@ -382,6 +383,7 @@ export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL +export KBUILD_ARFLAGS # When compiling out-of-tree modules, put MODVERDIR in the module # tree rather than in the kernel tree. The kernel tree might @@ -416,6 +418,12 @@ ifneq ($(KBUILD_SRC),) $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) endif +# Support for using generic headers in asm-generic +PHONY += asm-generic +asm-generic: + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ + obj=arch/$(SRCARCH)/include/generated/asm + # To make sure we do not include .config for any of the *config targets # catch them early, and hand them over to scripts/kconfig/Makefile # It is allowed to specify more targets when calling make, including @@ -559,6 +567,10 @@ ifndef CONFIG_CC_STACKPROTECTOR KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector) endif +# This warning generated too much noise in a regular build. +# Use make W=1 to enable this warning (see scripts/Makefile.build) +KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) + ifdef CONFIG_FRAME_POINTER KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls else @@ -604,7 +616,7 @@ CHECKFLAGS += $(NOSTDINC_FLAGS) KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) # disable pointer signed / unsigned warnings in gcc 4.0 -KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,) +KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign) # disable invalid "can't wrap" optimizations for signed / pointers KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow) @@ -612,6 +624,9 @@ KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow) # conserve stack if available KBUILD_CFLAGS += $(call cc-option,-fconserve-stack) +# use the deterministic mode of AR if available +KBUILD_ARFLAGS := $(call ar-option,D) + # check for 'asm goto' ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y) KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO @@ -797,15 +812,17 @@ ifdef CONFIG_KALLSYMS # o The correct .tmp_kallsyms2.o is linked into the final vmlinux. # o Verify that the System.map from vmlinux matches the map from # .tmp_vmlinux2, just in case we did not generate kallsyms correctly. -# o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using +# o If 'make KALLSYMS_EXTRA_PASS=1" was used, do an extra pass using # .tmp_vmlinux3 and .tmp_kallsyms3.o. This is only meant as a # temporary bypass to allow the kernel to be built while the # maintainers work out what went wrong with kallsyms. -ifdef CONFIG_KALLSYMS_EXTRA_PASS -last_kallsyms := 3 -else last_kallsyms := 2 + +ifdef KALLSYMS_EXTRA_PASS +ifneq ($(KALLSYMS_EXTRA_PASS),0) +last_kallsyms := 3 +endif endif kallsyms.o := .tmp_kallsyms$(last_kallsyms).o @@ -816,7 +833,8 @@ define verify_kallsyms $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map $(Q)cmp -s System.map .tmp_System.map || \ (echo Inconsistent kallsyms data; \ - echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \ + echo This is a bug - please report about it; \ + echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround; \ rm .tmp_kallsyms* ; /bin/false ) endef @@ -947,7 +965,7 @@ ifneq ($(KBUILD_SRC),) endif # prepare2 creates a makefile if using a separate output directory -prepare2: prepare3 outputmakefile +prepare2: prepare3 outputmakefile asm-generic prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \ include/config/auto.conf @@ -1021,7 +1039,7 @@ hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm) PHONY += __headers -__headers: include/linux/version.h scripts_basic FORCE +__headers: include/linux/version.h scripts_basic asm-generic FORCE $(Q)$(MAKE) $(build)=scripts build_unifdef PHONY += headers_install_all @@ -1136,7 +1154,8 @@ CLEAN_FILES += vmlinux System.map \ .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map # Directories & files removed with 'make mrproper' -MRPROPER_DIRS += include/config usr/include include/generated +MRPROPER_DIRS += include/config usr/include include/generated \ + arch/*/include/generated MRPROPER_FILES += .config .config.old .version .old_version \ include/linux/version.h \ Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS @@ -1267,7 +1286,11 @@ help: @echo ' make O=dir [targets] Locate all output files in "dir", including .config' @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)' @echo ' make C=2 [targets] Force check of all c source with $$CHECK' - @echo ' make W=1 [targets] Enable extra gcc checks' + @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where' + @echo ' 1: warnings which may be relevant and do not occur too often' + @echo ' 2: warnings which occur quite often but may still be relevant' + @echo ' 3: more obscure warnings, can most likely be ignored' + @echo ' Multiple levels can be combined with W=12 or W=123' @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' @echo '' @echo 'Execute "make" or "make all" to build all targets marked with [*] ' @@ -1291,6 +1314,7 @@ $(help-board-dirs): help-%: # Documentation targets # --------------------------------------------------------------------------- %docs: scripts_basic FORCE + $(Q)$(MAKE) $(build)=scripts build_docproc $(Q)$(MAKE) $(build)=Documentation/DocBook $@ else # KBUILD_EXTMOD @@ -1375,7 +1399,7 @@ endif # KBUILD_EXTMOD clean: $(clean-dirs) $(call cmd,rmdirs) $(call cmd,rmfiles) - @find $(or $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ + @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ -o -name '*.symtypes' -o -name 'modules.order' \ diff --git a/trunk/arch/Kconfig b/trunk/arch/Kconfig index 8d24bacaa61e..26b0e2397a57 100644 --- a/trunk/arch/Kconfig +++ b/trunk/arch/Kconfig @@ -175,4 +175,7 @@ config HAVE_ARCH_JUMP_LABEL config HAVE_ARCH_MUTEX_CPU_RELAX bool +config HAVE_RCU_TABLE_FREE + bool + source "kernel/gcov/Kconfig" diff --git a/trunk/arch/alpha/Kconfig b/trunk/arch/alpha/Kconfig index 9808998cc073..e3a82775f9da 100644 --- a/trunk/arch/alpha/Kconfig +++ b/trunk/arch/alpha/Kconfig @@ -12,6 +12,7 @@ config ALPHA select GENERIC_IRQ_PROBE select AUTO_IRQ_AFFINITY if SMP select GENERIC_IRQ_SHOW + select ARCH_WANT_OPTIONAL_GPIOLIB help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, @@ -51,6 +52,9 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_CMOS_UPDATE def_bool y +config GENERIC_GPIO + def_bool y + config ZONE_DMA bool default y diff --git a/trunk/arch/alpha/include/asm/gpio.h b/trunk/arch/alpha/include/asm/gpio.h new file mode 100644 index 000000000000..7dc6a6343c06 --- /dev/null +++ b/trunk/arch/alpha/include/asm/gpio.h @@ -0,0 +1,55 @@ +/* + * Generic GPIO API implementation for Alpha. + * + * A stright copy of that for PowerPC which was: + * + * Copyright (c) 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _ASM_ALPHA_GPIO_H +#define _ASM_ALPHA_GPIO_H + +#include +#include + +#ifdef CONFIG_GPIOLIB + +/* + * We don't (yet) implement inlined/rapid versions for on-chip gpios. + * Just call gpiolib. + */ +static inline int gpio_get_value(unsigned int gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return __gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(unsigned int gpio) +{ + return __gpio_to_irq(gpio); +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return -EINVAL; +} + +#endif /* CONFIG_GPIOLIB */ + +#endif /* _ASM_ALPHA_GPIO_H */ diff --git a/trunk/arch/alpha/include/asm/smp.h b/trunk/arch/alpha/include/asm/smp.h index 3f390e8cc0b3..c46e714aa3e0 100644 --- a/trunk/arch/alpha/include/asm/smp.h +++ b/trunk/arch/alpha/include/asm/smp.h @@ -39,8 +39,6 @@ struct cpuinfo_alpha { extern struct cpuinfo_alpha cpu_data[NR_CPUS]; -#define PROC_CHANGE_PENALTY 20 - #define hard_smp_processor_id() __hard_smp_processor_id() #define raw_smp_processor_id() (current_thread_info()->cpu) diff --git a/trunk/arch/alpha/kernel/process.c b/trunk/arch/alpha/kernel/process.c index 3ec35066f1dc..838eac128409 100644 --- a/trunk/arch/alpha/kernel/process.c +++ b/trunk/arch/alpha/kernel/process.c @@ -121,7 +121,7 @@ common_shutdown_1(void *generic_ptr) /* Wait for the secondaries to halt. */ set_cpu_present(boot_cpuid, false); set_cpu_possible(boot_cpuid, false); - while (cpus_weight(cpu_present_map)) + while (cpumask_weight(cpu_present_mask)) barrier(); #endif diff --git a/trunk/arch/alpha/kernel/setup.c b/trunk/arch/alpha/kernel/setup.c index edbddcbd5bc6..cc0fd862cf26 100644 --- a/trunk/arch/alpha/kernel/setup.c +++ b/trunk/arch/alpha/kernel/setup.c @@ -1257,7 +1257,7 @@ show_cpuinfo(struct seq_file *f, void *slot) #ifdef CONFIG_SMP seq_printf(f, "cpus active\t\t: %u\n" "cpu active mask\t\t: %016lx\n", - num_online_cpus(), cpus_addr(cpu_possible_map)[0]); + num_online_cpus(), cpumask_bits(cpu_possible_mask)[0]); #endif show_cache_size (f, "L1 Icache", alpha_l1i_cacheshape); diff --git a/trunk/arch/alpha/kernel/smp.c b/trunk/arch/alpha/kernel/smp.c index 5a621c6d22ab..d739703608fc 100644 --- a/trunk/arch/alpha/kernel/smp.c +++ b/trunk/arch/alpha/kernel/smp.c @@ -451,7 +451,7 @@ setup_smp(void) } printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_map = %lx\n", - smp_num_probed, cpu_present_map.bits[0]); + smp_num_probed, cpumask_bits(cpu_present_mask)[0]); } /* @@ -629,8 +629,9 @@ smp_send_reschedule(int cpu) void smp_send_stop(void) { - cpumask_t to_whom = cpu_possible_map; - cpu_clear(smp_processor_id(), to_whom); + cpumask_t to_whom; + cpumask_copy(&to_whom, cpu_possible_mask); + cpumask_clear_cpu(smp_processor_id(), &to_whom); #ifdef DEBUG_IPI_MSG if (hard_smp_processor_id() != boot_cpu_id) printk(KERN_WARNING "smp_send_stop: Not on boot cpu.\n"); diff --git a/trunk/arch/alpha/kernel/sys_dp264.c b/trunk/arch/alpha/kernel/sys_dp264.c index 5ac00fd4cd0c..f8856829c22a 100644 --- a/trunk/arch/alpha/kernel/sys_dp264.c +++ b/trunk/arch/alpha/kernel/sys_dp264.c @@ -140,7 +140,7 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) for (cpu = 0; cpu < 4; cpu++) { unsigned long aff = cpu_irq_affinity[cpu]; - if (cpu_isset(cpu, affinity)) + if (cpumask_test_cpu(cpu, &affinity)) aff |= 1UL << irq; else aff &= ~(1UL << irq); diff --git a/trunk/arch/alpha/kernel/sys_titan.c b/trunk/arch/alpha/kernel/sys_titan.c index fea0e4620994..6994407e242a 100644 --- a/trunk/arch/alpha/kernel/sys_titan.c +++ b/trunk/arch/alpha/kernel/sys_titan.c @@ -65,10 +65,11 @@ titan_update_irq_hw(unsigned long mask) register int bcpu = boot_cpuid; #ifdef CONFIG_SMP - cpumask_t cpm = cpu_present_map; + cpumask_t cpm; volatile unsigned long *dim0, *dim1, *dim2, *dim3; unsigned long mask0, mask1, mask2, mask3, dummy; + cpumask_copy(&cpm, cpu_present_mask); mask &= ~isa_enable; mask0 = mask & titan_cpu_irq_affinity[0]; mask1 = mask & titan_cpu_irq_affinity[1]; @@ -84,10 +85,10 @@ titan_update_irq_hw(unsigned long mask) dim1 = &cchip->dim1.csr; dim2 = &cchip->dim2.csr; dim3 = &cchip->dim3.csr; - if (!cpu_isset(0, cpm)) dim0 = &dummy; - if (!cpu_isset(1, cpm)) dim1 = &dummy; - if (!cpu_isset(2, cpm)) dim2 = &dummy; - if (!cpu_isset(3, cpm)) dim3 = &dummy; + if (!cpumask_test_cpu(0, &cpm)) dim0 = &dummy; + if (!cpumask_test_cpu(1, &cpm)) dim1 = &dummy; + if (!cpumask_test_cpu(2, &cpm)) dim2 = &dummy; + if (!cpumask_test_cpu(3, &cpm)) dim3 = &dummy; *dim0 = mask0; *dim1 = mask1; @@ -137,7 +138,7 @@ titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) int cpu; for (cpu = 0; cpu < 4; cpu++) { - if (cpu_isset(cpu, affinity)) + if (cpumask_test_cpu(cpu, &affinity)) titan_cpu_irq_affinity[cpu] |= 1UL << irq; else titan_cpu_irq_affinity[cpu] &= ~(1UL << irq); diff --git a/trunk/arch/alpha/kernel/vmlinux.lds.S b/trunk/arch/alpha/kernel/vmlinux.lds.S index 3d890a98a08b..f937ad123852 100644 --- a/trunk/arch/alpha/kernel/vmlinux.lds.S +++ b/trunk/arch/alpha/kernel/vmlinux.lds.S @@ -39,7 +39,7 @@ SECTIONS __init_begin = ALIGN(PAGE_SIZE); INIT_TEXT_SECTION(PAGE_SIZE) INIT_DATA_SECTION(16) - PERCPU(L1_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(L1_CACHE_BYTES) /* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page needed for the THREAD_SIZE aligned init_task gets freed after init */ . = ALIGN(THREAD_SIZE); diff --git a/trunk/arch/alpha/mm/init.c b/trunk/arch/alpha/mm/init.c index 86425ab53bf5..69d0c5761e2f 100644 --- a/trunk/arch/alpha/mm/init.c +++ b/trunk/arch/alpha/mm/init.c @@ -32,8 +32,6 @@ #include #include -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - extern void die_if_kernel(char *,struct pt_regs *,long); static struct pcb_struct original_pcb; diff --git a/trunk/arch/alpha/mm/numa.c b/trunk/arch/alpha/mm/numa.c index 7b2c56d8f930..3973ae395772 100644 --- a/trunk/arch/alpha/mm/numa.c +++ b/trunk/arch/alpha/mm/numa.c @@ -313,6 +313,7 @@ void __init paging_init(void) zones_size[ZONE_DMA] = dma_local_pfn; zones_size[ZONE_NORMAL] = (end_pfn - start_pfn) - dma_local_pfn; } + node_set_state(nid, N_NORMAL_MEMORY); free_area_init_node(nid, zones_size, start_pfn, NULL); } diff --git a/trunk/arch/arm/Kconfig.debug b/trunk/arch/arm/Kconfig.debug index 03d01d783e3b..81cbe40c159c 100644 --- a/trunk/arch/arm/Kconfig.debug +++ b/trunk/arch/arm/Kconfig.debug @@ -63,13 +63,6 @@ config DEBUG_USER 8 - SIGSEGV faults 16 - SIGBUS faults -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T output. - # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL bool "Kernel low-level debugging functions" diff --git a/trunk/arch/arm/include/asm/smp.h b/trunk/arch/arm/include/asm/smp.h index a87664f54f93..d2b514fd76f4 100644 --- a/trunk/arch/arm/include/asm/smp.h +++ b/trunk/arch/arm/include/asm/smp.h @@ -20,12 +20,6 @@ #define raw_smp_processor_id() (current_thread_info()->cpu) -/* - * at the moment, there's not a big penalty for changing CPUs - * (the >big< penalty is running SMP in the first place) - */ -#define PROC_CHANGE_PENALTY 15 - struct seq_file; /* diff --git a/trunk/arch/arm/include/asm/tlb.h b/trunk/arch/arm/include/asm/tlb.h index 82dfe5d0c41e..265f908c4a6e 100644 --- a/trunk/arch/arm/include/asm/tlb.h +++ b/trunk/arch/arm/include/asm/tlb.h @@ -41,12 +41,12 @@ */ #if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7) #define tlb_fast_mode(tlb) 0 -#define FREE_PTE_NR 500 #else #define tlb_fast_mode(tlb) 1 -#define FREE_PTE_NR 0 #endif +#define MMU_GATHER_BUNDLE 8 + /* * TLB handling. This allows us to remove pages from the page * tables, and efficiently handle the TLB issues. @@ -58,7 +58,9 @@ struct mmu_gather { unsigned long range_start; unsigned long range_end; unsigned int nr; - struct page *pages[FREE_PTE_NR]; + unsigned int max; + struct page **pages; + struct page *local[MMU_GATHER_BUNDLE]; }; DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); @@ -97,26 +99,37 @@ static inline void tlb_add_flush(struct mmu_gather *tlb, unsigned long addr) } } +static inline void __tlb_alloc_page(struct mmu_gather *tlb) +{ + unsigned long addr = __get_free_pages(GFP_NOWAIT | __GFP_NOWARN, 0); + + if (addr) { + tlb->pages = (void *)addr; + tlb->max = PAGE_SIZE / sizeof(struct page *); + } +} + static inline void tlb_flush_mmu(struct mmu_gather *tlb) { tlb_flush(tlb); if (!tlb_fast_mode(tlb)) { free_pages_and_swap_cache(tlb->pages, tlb->nr); tlb->nr = 0; + if (tlb->pages == tlb->local) + __tlb_alloc_page(tlb); } } -static inline struct mmu_gather * -tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) +static inline void +tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int fullmm) { - struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); - tlb->mm = mm; - tlb->fullmm = full_mm_flush; + tlb->fullmm = fullmm; tlb->vma = NULL; + tlb->max = ARRAY_SIZE(tlb->local); + tlb->pages = tlb->local; tlb->nr = 0; - - return tlb; + __tlb_alloc_page(tlb); } static inline void @@ -127,7 +140,8 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) /* keep the page table cache within bounds */ check_pgt_cache(); - put_cpu_var(mmu_gathers); + if (tlb->pages != tlb->local) + free_pages((unsigned long)tlb->pages, 0); } /* @@ -162,15 +176,22 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) tlb_flush(tlb); } -static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) +static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { if (tlb_fast_mode(tlb)) { free_page_and_swap_cache(page); - } else { - tlb->pages[tlb->nr++] = page; - if (tlb->nr >= FREE_PTE_NR) - tlb_flush_mmu(tlb); + return 1; /* avoid calling tlb_flush_mmu */ } + + tlb->pages[tlb->nr++] = page; + VM_BUG_ON(tlb->nr > tlb->max); + return tlb->max - tlb->nr; +} + +static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) +{ + if (!__tlb_remove_page(tlb, page)) + tlb_flush_mmu(tlb); } static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, diff --git a/trunk/arch/arm/kernel/vmlinux.lds.S b/trunk/arch/arm/kernel/vmlinux.lds.S index b4348e62ef06..e5287f21badc 100644 --- a/trunk/arch/arm/kernel/vmlinux.lds.S +++ b/trunk/arch/arm/kernel/vmlinux.lds.S @@ -82,7 +82,7 @@ SECTIONS #endif } - PERCPU(32, PAGE_SIZE) + PERCPU_SECTION(32) #ifndef CONFIG_XIP_KERNEL . = ALIGN(PAGE_SIZE); diff --git a/trunk/arch/arm/mach-omap2/board-3430sdp.c b/trunk/arch/arm/mach-omap2/board-3430sdp.c index 9afd087cc29c..23244cd0a5b6 100644 --- a/trunk/arch/arm/mach-omap2/board-3430sdp.c +++ b/trunk/arch/arm/mach-omap2/board-3430sdp.c @@ -37,8 +37,8 @@ #include #include #include -#include -#include +#include