diff --git a/[refs] b/[refs] index d0d5a79351f0..61bacbb4e75d 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: cfb7267aaba2b59374d7bc765f038698711b09d8 +refs/heads/master: d083450939dcfdc9f0e791e98478bd6d8ff80eea diff --git a/trunk/Documentation/dvb/bt8xx.txt b/trunk/Documentation/dvb/bt8xx.txt index 4e7614e606c5..ecb47adda063 100644 --- a/trunk/Documentation/dvb/bt8xx.txt +++ b/trunk/Documentation/dvb/bt8xx.txt @@ -9,19 +9,29 @@ for accessing the i2c bus and the gpio pins of the bt8xx chipset. Please see Documentation/dvb/cards.txt => o Cards based on the Conexant Bt8xx PCI bridge: Compiling kernel please enable: -a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "BT848 Video For Linux" -b.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" - => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards" +a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "Enable Video for Linux API 1 (DEPRECATED)" +b.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "Video Capture Adapters" => "BT848 Video For Linux" +c.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards" -2) Loading Modules -================== +Please use the following options with care as deselection of drivers which are in fact necessary +may result in DVB devices that cannot be tuned due to lack of driver support: +You can save RAM by deselecting every frontend module that your DVB card does not need. + +First please remove the static dependency of DVB card drivers on all frontend modules for all possible card variants by enabling: +d.) "Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" + => "DVB for Linux" "DVB Core Support" "Load and attach frontend modules as needed" -In default cases bttv is loaded automatically. -To load the backend either place dvb-bt8xx in etc/modules, or apply manually: +If you know the frontend driver that your card needs please enable: +e.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" + => "DVB for Linux" "DVB Core Support" "Customise DVB Frontends" => "Customise the frontend modules to build" + Then please select your card-specific frontend module. - $ modprobe dvb-bt8xx +2) Loading Modules +================== -All frontends will be loaded automatically. +Regular case: If the bttv driver detects a bt8xx-based DVB card, all frontend and backend modules will be loaded automatically. +Exceptions are: +- Old TwinHan DST cards or clones with or without CA slot and not containing an Eeprom. People running udev please see Documentation/dvb/udev.txt. In the following cases overriding the PCI type detection for dvb-bt8xx might be necessary: @@ -30,7 +40,6 @@ In the following cases overriding the PCI type detection for dvb-bt8xx might be ------------------------------ $ modprobe bttv card=113 - $ modprobe dvb-bt8xx $ modprobe dst Useful parameters for verbosity level and debugging the dst module: @@ -65,10 +74,9 @@ DViCO FusionHDTV 5 Lite: 135 Notice: The order of the card ID should be uprising: Example: $ modprobe bttv card=113 card=135 - $ modprobe dvb-bt8xx For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv. -In case of further problems send questions to the mailing list: www.linuxdvb.org. +In case of further problems please subscribe and send questions to the mailing list: linux-dvb@linuxtv.org. Authors: Richard Walker, Jamie Honan, diff --git a/trunk/Documentation/dvb/get_dvb_firmware b/trunk/Documentation/dvb/get_dvb_firmware index 4820366b6ae8..b4d306ae9234 100644 --- a/trunk/Documentation/dvb/get_dvb_firmware +++ b/trunk/Documentation/dvb/get_dvb_firmware @@ -24,7 +24,8 @@ use IO::Handle; @components = ( "sp8870", "sp887x", "tda10045", "tda10046", "tda10046lifeview", "av7110", "dec2000t", "dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004", - "or51211", "or51132_qam", "or51132_vsb", "bluebird"); + "or51211", "or51132_qam", "or51132_vsb", "bluebird", + "opera1"); # Check args syntax() if (scalar(@ARGV) != 1); @@ -56,7 +57,7 @@ syntax(); sub sp8870 { my $sourcefile = "tt_Premium_217g.zip"; - my $url = "http://www.technotrend.de/new/217g/$sourcefile"; + my $url = "http://www.softwarepatch.pl/9999ccd06a4813cb827dbb0005071c71/$sourcefile"; my $hash = "53970ec17a538945a6d8cb608a7b3899"; my $outfile = "dvb-fe-sp8870.fw"; my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); @@ -210,6 +211,45 @@ sub dec3000s { $outfile; } +sub opera1{ + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0); + + checkstandard(); + my $fwfile1="dvb-usb-opera1-fpga-01.fw"; + my $fwfile2="dvb-usb-opera-01.fw"; + extract("2830SCap2.sys", 0x62e8, 55024, "$tmpdir/opera1-fpga.fw"); + extract("2830SLoad2.sys",0x3178,0x3685-0x3178,"$tmpdir/fw1part1"); + extract("2830SLoad2.sys",0x0980,0x3150-0x0980,"$tmpdir/fw1part2"); + delzero("$tmpdir/fw1part1","$tmpdir/fw1part1-1"); + delzero("$tmpdir/fw1part2","$tmpdir/fw1part2-1"); + verify("$tmpdir/fw1part1-1","5e0909858fdf0b5b09ad48b9fe622e70"); + verify("$tmpdir/fw1part2-1","d6e146f321427e931df2c6fcadac37a1"); + verify("$tmpdir/opera1-fpga.fw","0f8133f5e9051f5f3c1928f7e5a1b07d"); + + my $RES1="\x01\x92\x7f\x00\x01\x00"; + my $RES0="\x01\x92\x7f\x00\x00\x00"; + my $DAT1="\x01\x00\xe6\x00\x01\x00"; + my $DAT0="\x01\x00\xe6\x00\x00\x00"; + open FW,">$tmpdir/opera.fw"; + print FW "$RES1"; + print FW "$DAT1"; + print FW "$RES1"; + print FW "$DAT1"; + appendfile(FW,"$tmpdir/fw1part1-1"); + print FW "$RES0"; + print FW "$DAT0"; + print FW "$RES1"; + print FW "$DAT1"; + appendfile(FW,"$tmpdir/fw1part2-1"); + print FW "$RES1"; + print FW "$DAT1"; + print FW "$RES0"; + print FW "$DAT0"; + copy ("$tmpdir/opera1-fpga.fw",$fwfile1); + copy ("$tmpdir/opera.fw",$fwfile2); + + $fwfile1.",".$fwfile2; +} sub vp7041 { my $sourcefile = "2.422.zip"; @@ -440,6 +480,25 @@ sub appendfile { close(INFILE); } +sub delzero{ + my ($infile,$outfile) =@_; + + open INFILE,"<$infile"; + open OUTFILE,">$outfile"; + while (1){ + $rcount=sysread(INFILE,$buf,22); + $len=ord(substr($buf,0,1)); + print OUTFILE substr($buf,0,1); + print OUTFILE substr($buf,2,$len+3); + last if ($rcount<1); + printf OUTFILE "%c",0; +#print $len." ".length($buf)."\n"; + + } + close(INFILE); + close(OUTFILE); +} + sub syntax() { print STDERR "syntax: get_dvb_firmware \n"; print STDERR "Supported components:\n"; diff --git a/trunk/Documentation/dvb/opera-firmware.txt b/trunk/Documentation/dvb/opera-firmware.txt new file mode 100644 index 000000000000..93e784c2607b --- /dev/null +++ b/trunk/Documentation/dvb/opera-firmware.txt @@ -0,0 +1,27 @@ +To extract the firmware for the Opera DVB-S1 USB-Box +you need to copy the files: + +2830SCap2.sys +2830SLoad2.sys + +from the windriver disk into this directory. + +Then run + +./get_dvb_firware opera1 + +and after that you have 2 files: + +dvb-usb-opera-01.fw +dvb-usb-opera1-fpga-01.fw + +in here. + +Copy them into /lib/firmware/ . + +After that the driver can load the firmware +(if you have enabled firmware loading +in kernel config and have hotplug running). + + +Marco Gittler \ No newline at end of file diff --git a/trunk/Documentation/video4linux/CARDLIST.bttv b/trunk/Documentation/video4linux/CARDLIST.bttv index b60639130a51..177159c5f4c4 100644 --- a/trunk/Documentation/video4linux/CARDLIST.bttv +++ b/trunk/Documentation/video4linux/CARDLIST.bttv @@ -66,7 +66,7 @@ 65 -> Lifeview FlyVideo 2000S LR90 66 -> Terratec TValueRadio [153b:1135,153b:ff3b] 67 -> IODATA GV-BCTV4/PCI [10fc:4050] - 68 -> 3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA) [121a:3000,10b4:2637] + 68 -> 3Dfx VoodooTV FM (Euro) [10b4:2637] 69 -> Active Imaging AIMMS 70 -> Prolink Pixelview PV-BT878P+ (Rev.4C,8E) 71 -> Lifeview FlyVideo 98EZ (capture only) LR51 [1851:1851] @@ -145,3 +145,5 @@ 144 -> MagicTV 145 -> SSAI Security Video Interface [4149:5353] 146 -> SSAI Ultrasound Video Interface [414a:5353] +147 -> VoodooTV 200 (USA) [121a:3000] +148 -> DViCO FusionHDTV 2 [dbc0:d200] diff --git a/trunk/Documentation/video4linux/CARDLIST.cx88 b/trunk/Documentation/video4linux/CARDLIST.cx88 index 60f838beb9c8..82ac8250e978 100644 --- a/trunk/Documentation/video4linux/CARDLIST.cx88 +++ b/trunk/Documentation/video4linux/CARDLIST.cx88 @@ -55,3 +55,4 @@ 54 -> Norwood Micro TV Tuner 55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM [c180:c980] 56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [0070:9600,0070:9601,0070:9602] + 57 -> ADS Tech Instant Video PCI [1421:0390] diff --git a/trunk/Documentation/video4linux/CARDLIST.saa7134 b/trunk/Documentation/video4linux/CARDLIST.saa7134 index 712e8c8333cc..3f8aeab50a10 100644 --- a/trunk/Documentation/video4linux/CARDLIST.saa7134 +++ b/trunk/Documentation/video4linux/CARDLIST.saa7134 @@ -114,3 +114,4 @@ 113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM) [1019:4cb6] 114 -> KWorld DVB-T 210 [17de:7250] 115 -> Sabrent PCMCIA TV-PCB05 [0919:2003] +116 -> 10MOONS TM300 TV Card [1131:2304] diff --git a/trunk/Documentation/video4linux/CARDLIST.tuner b/trunk/Documentation/video4linux/CARDLIST.tuner index 44134f04b82a..a88c02d23805 100644 --- a/trunk/Documentation/video4linux/CARDLIST.tuner +++ b/trunk/Documentation/video4linux/CARDLIST.tuner @@ -40,7 +40,7 @@ tuner=38 - Philips PAL/SECAM multi (FM1216ME MK3) tuner=39 - LG NTSC (newer TAPC series) tuner=40 - HITACHI V7-J180AT tuner=41 - Philips PAL_MK (FI1216 MK) -tuner=42 - Philips 1236D ATSC/NTSC dual in +tuner=42 - Philips FCV1236D ATSC/NTSC dual in tuner=43 - Philips NTSC MK3 (FM1236MK3 or FM1236/F) tuner=44 - Philips 4 in 1 (ATI TV Wonder Pro/Conexant) tuner=45 - Microtune 4049 FM5 @@ -72,3 +72,4 @@ tuner=70 - Samsung TCPN 2121P30A tuner=71 - Xceive xc3028 tuner=72 - Thomson FE6600 tuner=73 - Samsung TCPG 6121P30A +tuner=75 - Philips TEA5761 FM Radio diff --git a/trunk/Documentation/video4linux/sn9c102.txt b/trunk/Documentation/video4linux/sn9c102.txt index 279717c96f63..1ffad19ce891 100644 --- a/trunk/Documentation/video4linux/sn9c102.txt +++ b/trunk/Documentation/video4linux/sn9c102.txt @@ -436,7 +436,7 @@ HV7131D Hynix Semiconductor | Yes No No No HV7131R Hynix Semiconductor | No Yes Yes Yes MI-0343 Micron Technology | Yes No No No MI-0360 Micron Technology | No Yes Yes Yes -OV7630 OmniVision Technologies | Yes Yes No No +OV7630 OmniVision Technologies | Yes Yes Yes Yes OV7660 OmniVision Technologies | No No Yes Yes PAS106B PixArt Imaging | Yes No No No PAS202B PixArt Imaging | Yes Yes No No @@ -583,6 +583,7 @@ order): - Bertrik Sikken, who reverse-engineered and documented the Huffman compression algorithm used in the SN9C101, SN9C102 and SN9C103 controllers and implemented the first decoder; +- Ronny Standke for the donation of a webcam; - Mizuno Takafumi for the donation of a webcam; - an "anonymous" donator (who didn't want his name to be revealed) for the donation of a webcam. diff --git a/trunk/Documentation/video4linux/zr364xx.txt b/trunk/Documentation/video4linux/zr364xx.txt index c76992d0ff4d..4d9a0c33f2fd 100644 --- a/trunk/Documentation/video4linux/zr364xx.txt +++ b/trunk/Documentation/video4linux/zr364xx.txt @@ -62,4 +62,4 @@ Vendor Product Distributor Model 0x0784 0x0040 Traveler Slimline X5 0x06d6 0x0034 Trust Powerc@m 750 0x0a17 0x0062 Pentax Optio 50L - +0x06d6 0x003b Trust Powerc@m 970Z diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index 5abec1435ad8..e78f62f13bac 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -913,6 +913,12 @@ M: mchan@broadcom.com L: netdev@vger.kernel.org S: Supported +BSG (block layer generic sg v4 driver) +P: FUJITA Tomonori +M: fujita.tomonori@lab.ntt.co.jp +L: linux-scsi@vger.kernel.org +S: Supported + BTTV VIDEO4LINUX DRIVER P: Mauro Carvalho Chehab M: mchehab@infradead.org @@ -1734,6 +1740,7 @@ S: Maintained i386 SETUP CODE / CPU ERRATA WORKAROUNDS P: H. Peter Anvin M: hpa@zytor.com +T: git.kernel.org:/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup.git S: Maintained IA64 (Itanium) PLATFORM @@ -2387,7 +2394,7 @@ P: Artem Bityutskiy M: dedekind@infradead.org W: http://www.linux-mtd.infradead.org/ L: linux-mtd@lists.infradead.org -T: git git://git.infradead.org/ubi-2.6.git +T: git git://git.infradead.org/~dedekind/ubi-2.6.git S: Maintained MICROTEK X6 SCANNER @@ -4104,6 +4111,11 @@ W: http://www.polyware.nl/~middelin/En/hobbies.html W: http://www.polyware.nl/~middelin/hobbies.html S: Maintained +ZS DECSTATION Z85C30 SERIAL DRIVER +P: Maciej W. Rozycki +M: macro@linux-mips.org +S: Maintained + THE REST P: Linus Torvalds S: Buried alive in reporters diff --git a/trunk/arch/alpha/kernel/smp.c b/trunk/arch/alpha/kernel/smp.c index 80cfb758ee2b..b28731437c31 100644 --- a/trunk/arch/alpha/kernel/smp.c +++ b/trunk/arch/alpha/kernel/smp.c @@ -65,7 +65,7 @@ enum ipi_message_type { }; /* Set to a secondary's cpuid when it comes online. */ -static int smp_secondary_alive __initdata = 0; +static int smp_secondary_alive __devinitdata = 0; /* Which cpus ids came online. */ cpumask_t cpu_online_map; @@ -173,7 +173,7 @@ smp_callin(void) } /* Wait until hwrpb->txrdy is clear for cpu. Return -1 on timeout. */ -static int __init +static int __devinit wait_for_txrdy (unsigned long cpumask) { unsigned long timeout; @@ -358,7 +358,7 @@ secondary_cpu_start(int cpuid, struct task_struct *idle) /* * Bring one cpu online. */ -static int __init +static int __devinit smp_boot_one_cpu(int cpuid) { struct task_struct *idle; diff --git a/trunk/arch/alpha/lib/checksum.c b/trunk/arch/alpha/lib/checksum.c index ab3761c437a8..8698e0746f9f 100644 --- a/trunk/arch/alpha/lib/checksum.c +++ b/trunk/arch/alpha/lib/checksum.c @@ -69,6 +69,7 @@ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, result = (result & 0xffffffff) + (result >> 32); return (__force __wsum)result; } +EXPORT_SYMBOL(csum_tcpudp_nofold); /* * Do a 64-bit checksum on an arbitrary memory area.. diff --git a/trunk/arch/avr32/Kconfig b/trunk/arch/avr32/Kconfig index 3ec76586877e..d12346aaa88b 100644 --- a/trunk/arch/avr32/Kconfig +++ b/trunk/arch/avr32/Kconfig @@ -113,6 +113,10 @@ config BOARD_ATNGW100 bool "ATNGW100 Network Gateway" endchoice +if BOARD_ATSTK1000 +source "arch/avr32/boards/atstk1000/Kconfig" +endif + choice prompt "Boot loader type" default LOADER_U_BOOT @@ -185,6 +189,27 @@ config CMDLINE endmenu +menu "Power managment options" + +menu "CPU Frequency scaling" + +source "drivers/cpufreq/Kconfig" + +config CPU_FREQ_AT32AP + bool "CPU frequency driver for AT32AP" + depends on CPU_FREQ && PLATFORM_AT32AP + default n + help + This enables the CPU frequency driver for AT32AP processors. + + For details, take a look in . + + If in doubt, say N. + +endmenu + +endmenu + menu "Bus options" config PCI diff --git a/trunk/arch/avr32/boards/atstk1000/Kconfig b/trunk/arch/avr32/boards/atstk1000/Kconfig new file mode 100644 index 000000000000..71bc7d364fb7 --- /dev/null +++ b/trunk/arch/avr32/boards/atstk1000/Kconfig @@ -0,0 +1,53 @@ +# STK1000 customization + +if BOARD_ATSTK1002 + +config BOARD_ATSTK1002_CUSTOM + bool "Non-default STK-1002 jumper settings" + help + You will normally leave the jumpers on the CPU card at their + default settings. If you need to use certain peripherals, + you will need to change some of those jumpers. + +if BOARD_ATSTK1002_CUSTOM + +config BOARD_ATSTK1002_SW1_CUSTOM + bool "SW1: use SSC1 (not SPI0)" + help + This also prevents using the external DAC as an audio interface, + and means you can't initialize the on-board QVGA display. + +config BOARD_ATSTK1002_SW2_CUSTOM + bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)" + help + If you change this you'll want an updated boot loader putting + the console on UART-C not UART-A. + +config BOARD_ATSTK1002_SW3_CUSTOM + bool "SW3: use TIMER1 (not SSC0 and GCLK)" + help + This also prevents using the external DAC as an audio interface. + +config BOARD_ATSTK1002_SW4_CUSTOM + bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)" + help + To use the camera interface you'll need a custom card (on the + PCI-format connector) connect a video sensor. + +config BOARD_ATSTK1002_SW5_CUSTOM + bool "SW5: use MACB1 (not LCDC)" + +config BOARD_ATSTK1002_SW6_CUSTOM + bool "SW6: more GPIOs (not MACB0)" + +endif # custom + +config BOARD_ATSTK1002_SPI1 + bool "Configure SPI1 controller" + depends on !BOARD_ATSTK1002_SW4_CUSTOM + help + All the signals for the second SPI controller are available on + GPIO lines and accessed through the J1 jumper block. Say "y" + here to configure that SPI controller. + +endif # stk 1002 diff --git a/trunk/arch/avr32/boards/atstk1000/atstk1002.c b/trunk/arch/avr32/boards/atstk1000/atstk1002.c index e253e86a1a39..cb93eabb9c6c 100644 --- a/trunk/arch/avr32/boards/atstk1000/atstk1002.c +++ b/trunk/arch/avr32/boards/atstk1000/atstk1002.c @@ -27,15 +27,27 @@ #include "atstk1000.h" -#define SW2_DEFAULT /* MMCI and UART_A available */ struct eth_addr { u8 addr[6]; }; static struct eth_addr __initdata hw_addr[2]; -static struct eth_platform_data __initdata eth_data[2]; +static struct eth_platform_data __initdata eth_data[2] = { + { + /* + * The MDIO pullups on STK1000 are a bit too weak for + * the autodetection to work properly, so we have to + * mask out everything but the correct address. + */ + .phy_mask = ~(1U << 16), + }, + { + .phy_mask = ~(1U << 17), + }, +}; +#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM static struct spi_board_info spi0_board_info[] __initdata = { { /* QVGA display */ @@ -45,6 +57,13 @@ static struct spi_board_info spi0_board_info[] __initdata = { .mode = SPI_MODE_3, }, }; +#endif + +#ifdef CONFIG_BOARD_ATSTK1002_SPI1 +static struct spi_board_info spi1_board_info[] __initdata = { { + /* patch in custom entries here */ +} }; +#endif /* * The next two functions should go away as the boot loader is @@ -103,10 +122,10 @@ static void __init set_hw_addr(struct platform_device *pdev) void __init setup_board(void) { -#ifdef SW2_DEFAULT - at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ -#else +#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ +#else + at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ #endif /* USART 2/unused: expansion connector */ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ @@ -140,18 +159,31 @@ static int __init atstk1002_init(void) at32_add_system_devices(); -#ifdef SW2_DEFAULT - at32_add_device_usart(0); -#else +#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM at32_add_device_usart(1); +#else + at32_add_device_usart(0); #endif at32_add_device_usart(2); +#ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM set_hw_addr(at32_add_device_eth(0, ð_data[0])); - +#endif +#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); +#endif +#ifdef CONFIG_BOARD_ATSTK1002_SPI1 + at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); +#endif +#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM + set_hw_addr(at32_add_device_eth(1, ð_data[1])); +#else at32_add_device_lcdc(0, &atstk1000_lcdc_data, fbmem_start, fbmem_size); +#endif +#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM + at32_add_device_ssc(0, ATMEL_SSC_TX); +#endif return 0; } diff --git a/trunk/arch/avr32/kernel/setup.c b/trunk/arch/avr32/kernel/setup.c index b279d66acf5f..d08b0bc6b2bb 100644 --- a/trunk/arch/avr32/kernel/setup.c +++ b/trunk/arch/avr32/kernel/setup.c @@ -313,7 +313,7 @@ __tagtable(ATAG_MEM, parse_tag_mem); static int __init parse_tag_rdimg(struct tag *tag) { -#ifdef CONFIG_INITRD +#ifdef CONFIG_BLK_DEV_INITRD struct tag_mem_range *mem = &tag->u.mem_range; int ret; @@ -323,7 +323,7 @@ static int __init parse_tag_rdimg(struct tag *tag) return 0; } - ret = add_reserved_region(mem->start, mem->start + mem->size - 1, + ret = add_reserved_region(mem->addr, mem->addr + mem->size - 1, "initrd"); if (ret) { printk(KERN_WARNING diff --git a/trunk/arch/avr32/mach-at32ap/Makefile b/trunk/arch/avr32/mach-at32ap/Makefile index f1d395724ac6..a8b445046e3e 100644 --- a/trunk/arch/avr32/mach-at32ap/Makefile +++ b/trunk/arch/avr32/mach-at32ap/Makefile @@ -1,3 +1,4 @@ obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o +obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o diff --git a/trunk/arch/avr32/mach-at32ap/at32ap.c b/trunk/arch/avr32/mach-at32ap/at32ap.c index 90f207e8e96d..7c4987f3287a 100644 --- a/trunk/arch/avr32/mach-at32ap/at32ap.c +++ b/trunk/arch/avr32/mach-at32ap/at32ap.c @@ -11,41 +11,10 @@ #include #include -#include - #include -#include - -struct at32_sm system_manager; - -static int __init at32_sm_init(void) -{ - struct resource *regs; - struct at32_sm *sm = &system_manager; - int ret = -ENXIO; - - regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0); - if (!regs) - goto fail; - - spin_lock_init(&sm->lock); - sm->pdev = &at32_sm_device; - - ret = -ENOMEM; - sm->regs = ioremap(regs->start, regs->end - regs->start + 1); - if (!sm->regs) - goto fail; - - return 0; - -fail: - printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret); - return ret; -} void __init setup_platform(void) { - at32_sm_init(); at32_clock_init(); at32_portmux_init(); } diff --git a/trunk/arch/avr32/mach-at32ap/at32ap7000.c b/trunk/arch/avr32/mach-at32ap/at32ap7000.c index 4dda42d3f6d5..64cc5583ddfb 100644 --- a/trunk/arch/avr32/mach-at32ap/at32ap7000.c +++ b/trunk/arch/avr32/mach-at32ap/at32ap7000.c @@ -17,14 +17,20 @@ #include #include #include -#include #include