diff --git a/[refs] b/[refs]
index 0b637f53089a..e05fea0d3d14 100644
--- a/[refs]
+++ b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 66c7acf61dc6b27954bb9ceb8617d447ac03734a
+refs/heads/master: fa7b906e7fef53b6c9eb3ecb8164b0a69e9e1a68
diff --git a/trunk/CREDITS b/trunk/CREDITS
index abe05a0be4ed..61186c85d728 100644
--- a/trunk/CREDITS
+++ b/trunk/CREDITS
@@ -1681,7 +1681,7 @@ E: ajoshi@shell.unixbox.com
 D: fbdev hacking
 
 N: Jesper Juhl
-E: jesper.juhl@gmail.com
+E: jj@chaosbits.net
 D: Various fixes, cleanups and minor features all over the tree.
 D: Wrote initial version of the hdaps driver (since passed on to others).
 S: Lemnosvej 1, 3.tv
diff --git a/trunk/Documentation/dell_rbu.txt b/trunk/Documentation/dell_rbu.txt
index 2c0d631de0cf..c11b931f8f98 100644
--- a/trunk/Documentation/dell_rbu.txt
+++ b/trunk/Documentation/dell_rbu.txt
@@ -81,8 +81,8 @@ Until this step is completed the driver cannot be unloaded.
 Also echoing either mono ,packet or init in to image_type will free up the
 memory allocated by the driver.
 
-If an user by accident executes steps 1 and 3 above without executing step 2;
-it will make the /sys/class/firmware/dell_rbu/ entries to disappear.
+If a user by accident executes steps 1 and 3 above without executing step 2;
+it will make the /sys/class/firmware/dell_rbu/ entries disappear.
 The entries can be recreated by doing the following
 echo init > /sys/devices/platform/dell_rbu/image_type
 NOTE: echoing init in image_type does not change it original value.
diff --git a/trunk/Documentation/hwmon/abituguru-datasheet b/trunk/Documentation/hwmon/abituguru-datasheet
index aef5a9b36846..4d184f2db0ea 100644
--- a/trunk/Documentation/hwmon/abituguru-datasheet
+++ b/trunk/Documentation/hwmon/abituguru-datasheet
@@ -74,7 +74,7 @@ a sensor.
 Notice that some banks have both a read and a write address this is how the
 uGuru determines if a read from or a write to the bank is taking place, thus
 when reading you should always use the read address and when writing the
-write address. The write address is always one (1) more then the read address.
+write address. The write address is always one (1) more than the read address.
 
 
 uGuru ready
@@ -224,7 +224,7 @@ Bit 3: Beep if alarm							(RW)
 Bit 4: 1 if alarm cause measured temp is over the warning threshold	(R)
 Bit 5: 1 if alarm cause measured volt is over the max threshold		(R)
 Bit 6: 1 if alarm cause measured volt is under the min threshold	(R)
-Bit 7: Volt sensor: Shutdown if alarm persist for more then 4 seconds	(RW)
+Bit 7: Volt sensor: Shutdown if alarm persist for more than 4 seconds	(RW)
        Temp sensor: Shutdown if temp is over the shutdown threshold	(RW)
 
 *  This bit is only honored/used by the uGuru if a temp sensor is connected
@@ -293,7 +293,7 @@ Byte 0:
 Alarm behaviour for the selected sensor. A 1 enables the described behaviour.
 Bit 0: Give an alarm if measured rpm is under the min threshold	(RW)
 Bit 3: Beep if alarm						(RW)
-Bit 7: Shutdown if alarm persist for more then 4 seconds	(RW)
+Bit 7: Shutdown if alarm persist for more than 4 seconds	(RW)
 
 Byte 1:
 min threshold (scale as bank 0x26)
diff --git a/trunk/Documentation/laptops/thinkpad-acpi.txt b/trunk/Documentation/laptops/thinkpad-acpi.txt
index 71f0fe1fc1b0..898b4987bb80 100644
--- a/trunk/Documentation/laptops/thinkpad-acpi.txt
+++ b/trunk/Documentation/laptops/thinkpad-acpi.txt
@@ -1475,7 +1475,7 @@ Sysfs interface changelog:
 
 0x020100:	Marker for thinkpad-acpi with hot key NVRAM polling
 		support.  If you must, use it to know you should not
-		start an userspace NVRAM poller (allows to detect when
+		start a userspace NVRAM poller (allows to detect when
 		NVRAM is compiled out by the user because it is
 		unneeded/undesired in the first place).
 0x020101:	Marker for thinkpad-acpi with hot key NVRAM polling
diff --git a/trunk/Documentation/networking/rxrpc.txt b/trunk/Documentation/networking/rxrpc.txt
index c3669a3fb4af..60d05eb77c64 100644
--- a/trunk/Documentation/networking/rxrpc.txt
+++ b/trunk/Documentation/networking/rxrpc.txt
@@ -540,7 +540,7 @@ A client would issue an operation by:
      MSG_MORE should be set in msghdr::msg_flags on all but the last part of
      the request.  Multiple requests may be made simultaneously.
 
-     If a call is intended to go to a destination other then the default
+     If a call is intended to go to a destination other than the default
      specified through connect(), then msghdr::msg_name should be set on the
      first request message of that call.
 
diff --git a/trunk/Documentation/networking/tuntap.txt b/trunk/Documentation/networking/tuntap.txt
index 839cbb71388b..c0aab985bad9 100644
--- a/trunk/Documentation/networking/tuntap.txt
+++ b/trunk/Documentation/networking/tuntap.txt
@@ -118,7 +118,7 @@ As mentioned above, main purpose of TUN/TAP driver is tunneling.
 It is used by VTun (http://vtun.sourceforge.net).
 
 Another interesting application using TUN/TAP is pipsecd
-(http://perso.enst.fr/~beyssac/pipsec/), an userspace IPSec
+(http://perso.enst.fr/~beyssac/pipsec/), a userspace IPSec
 implementation that can use complete kernel routing (unlike FreeS/WAN).
 
 3. How does Virtual network device actually work ? 
diff --git a/trunk/Documentation/scsi/ChangeLog.lpfc b/trunk/Documentation/scsi/ChangeLog.lpfc
index ae3f962a7cfc..ff19a52fe004 100644
--- a/trunk/Documentation/scsi/ChangeLog.lpfc
+++ b/trunk/Documentation/scsi/ChangeLog.lpfc
@@ -733,7 +733,7 @@ Changes from 20040920 to 20041018
 	  I/O completion path a little more, especially taking care of
 	  fast-pathing the non-error case.  Also removes tons of dead
 	  members and defines from lpfc_scsi.h - e.g. lpfc_target is down
-	  to nothing more then the lpfc_nodelist pointer.
+	  to nothing more than the lpfc_nodelist pointer.
 	* Added binary sysfs file to issue mbox commands
 	* Replaced #if __BIG_ENDIAN with #if __BIG_ENDIAN_BITFIELD for
 	  compatibility with the user space applications.
diff --git a/trunk/Documentation/scsi/ChangeLog.ncr53c8xx b/trunk/Documentation/scsi/ChangeLog.ncr53c8xx
index a9f721aeb11c..8b278c10edfd 100644
--- a/trunk/Documentation/scsi/ChangeLog.ncr53c8xx
+++ b/trunk/Documentation/scsi/ChangeLog.ncr53c8xx
@@ -19,7 +19,7 @@ Sun Sep 24 21:30 2000 Gerard Roudier (groudier@club-internet.fr)
 
 Wed Jul 26 23:30 2000 Gerard Roudier (groudier@club-internet.fr)
 	* version ncr53c8xx-3.4.1
-	- Provide OpenFirmare path through the proc FS on PPC.
+	- Provide OpenFirmware path through the proc FS on PPC.
 	- Remove trailing argument #2 from a couple of #undefs.
 
 Sun Jul 09 16:30 2000 Gerard Roudier (groudier@club-internet.fr)
diff --git a/trunk/Documentation/scsi/ChangeLog.sym53c8xx b/trunk/Documentation/scsi/ChangeLog.sym53c8xx
index ef985ec348e6..02ffbc1e8a84 100644
--- a/trunk/Documentation/scsi/ChangeLog.sym53c8xx
+++ b/trunk/Documentation/scsi/ChangeLog.sym53c8xx
@@ -81,7 +81,7 @@ Sun Sep 24 21:30 2000 Gerard Roudier (groudier@club-internet.fr)
 
 Wed Jul 26 23:30 2000 Gerard Roudier (groudier@club-internet.fr)
 	* version sym53c8xx-1.7.1
-	- Provide OpenFirmare path through the proc FS on PPC.
+	- Provide OpenFirmware path through the proc FS on PPC.
 	- Download of on-chip SRAM using memcpy_toio() doesn't work 
 	  on PPC. Restore previous method (MEMORY MOVE from SCRIPTS).
 	- Remove trailing argument #2 from a couple of #undefs.
diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
index 094dd52d7309..06f8ff938c71 100644
--- a/trunk/MAINTAINERS
+++ b/trunk/MAINTAINERS
@@ -4229,9 +4229,10 @@ L:	tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 
 TRIVIAL PATCHES
-P:	Jesper Juhl
+P:	Jiri Kosina
 M:	trivial@kernel.org
 L:	linux-kernel@vger.kernel.org
+T:	git kernel.org:/pub/scm/linux/kernel/git/jikos/trivial.git
 S:	Maintained
 
 TTY LAYER
diff --git a/trunk/Makefile b/trunk/Makefile
index f9006663f01e..c9ac00837787 100644
--- a/trunk/Makefile
+++ b/trunk/Makefile
@@ -1008,7 +1008,7 @@ define check-symlink
 endef
 
 # We create the target directory of the symlink if it does
-# not exist so the test in chack-symlink works and we have a
+# not exist so the test in check-symlink works and we have a
 # directory for generated filesas used by some architectures.
 define create-symlink
 	if [ ! -L include/asm ]; then                                      \
diff --git a/trunk/arch/avr32/Kconfig b/trunk/arch/avr32/Kconfig
index 26eca87f6735..b189680d18b0 100644
--- a/trunk/arch/avr32/Kconfig
+++ b/trunk/arch/avr32/Kconfig
@@ -122,6 +122,24 @@ config BOARD_ATNGW100
 	bool "ATNGW100 Network Gateway"
 	select CPU_AT32AP7000
 
+config BOARD_HAMMERHEAD
+	bool "Hammerhead board"
+	select CPU_AT32AP7000
+	select USB_ARCH_HAS_HCD
+	help
+	  The Hammerhead platform is built around a AVR32 32-bit microcontroller from Atmel.
+	  It offers versatile peripherals, such as ethernet, usb device, usb host etc.
+
+	  The board also incooperates a power supply and is a Power over Ethernet (PoE) Powered
+	  Device (PD).
+
+	  Additonally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is
+	  mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which
+	  will cover even the most exceptional need of memory bandwidth. Together with the onboard
+	  video decoder the board is ready for video processing.
+
+	  For more information see: http://www.miromico.com/hammerhead
+
 config BOARD_FAVR_32
 	bool "Favr-32 LCD-board"
 	select CPU_AT32AP7000
@@ -133,6 +151,7 @@ endchoice
 
 source "arch/avr32/boards/atstk1000/Kconfig"
 source "arch/avr32/boards/atngw100/Kconfig"
+source "arch/avr32/boards/hammerhead/Kconfig"
 source "arch/avr32/boards/favr-32/Kconfig"
 
 choice
diff --git a/trunk/arch/avr32/Makefile b/trunk/arch/avr32/Makefile
index b088e103e753..f3ef3bbf797c 100644
--- a/trunk/arch/avr32/Makefile
+++ b/trunk/arch/avr32/Makefile
@@ -33,6 +33,7 @@ head-y					+= arch/avr32/kernel/head.o
 core-y					+= $(machdirs)
 core-$(CONFIG_BOARD_ATSTK1000)		+= arch/avr32/boards/atstk1000/
 core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
+core-$(CONFIG_BOARD_HAMMERHEAD)		+= arch/avr32/boards/hammerhead/
 core-$(CONFIG_BOARD_FAVR_32)		+= arch/avr32/boards/favr-32/
 core-$(CONFIG_BOARD_MIMC200)		+= arch/avr32/boards/mimc200/
 core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
diff --git a/trunk/arch/avr32/boards/atngw100/setup.c b/trunk/arch/avr32/boards/atngw100/setup.c
index 32fb9ba0fbdf..05d3722fff18 100644
--- a/trunk/arch/avr32/boards/atngw100/setup.c
+++ b/trunk/arch/avr32/boards/atngw100/setup.c
@@ -19,8 +19,8 @@
 #include <linux/types.h>
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
+#include <linux/atmel-mci.h>
 
-#include <asm/atmel-mci.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 
diff --git a/trunk/arch/avr32/boards/atstk1000/atstk1002.c b/trunk/arch/avr32/boards/atstk1000/atstk1002.c
index 5c5cdf3b464f..1f33a106905c 100644
--- a/trunk/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/trunk/arch/avr32/boards/atstk1000/atstk1002.c
@@ -16,12 +16,12 @@
 #include <linux/types.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
+#include <linux/atmel-mci.h>
 
 #include <video/atmel_lcdc.h>
 
 #include <asm/io.h>
 #include <asm/setup.h>
-#include <asm/atmel-mci.h>
 
 #include <mach/at32ap700x.h>
 #include <mach/board.h>
@@ -287,23 +287,7 @@ static int __init atstk1002_init(void)
 	 * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
 	 * SDRAM-specific pins so that nobody messes with them.
 	 */
-	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
-	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
-	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
-	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
-	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
-	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
-	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
-	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
-	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
-	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
-	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
-	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
-	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
-	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
-	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
-	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
-	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
+	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
 
 #ifdef CONFIG_BOARD_ATSTK1006
 	smc_set_timing(&nand_config, &nand_timing);
diff --git a/trunk/arch/avr32/boards/atstk1000/atstk1003.c b/trunk/arch/avr32/boards/atstk1000/atstk1003.c
index 134b566630b0..b3a23c88bcfe 100644
--- a/trunk/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/trunk/arch/avr32/boards/atstk1000/atstk1003.c
@@ -17,9 +17,9 @@
 
 #include <linux/spi/at73c213.h>
 #include <linux/spi/spi.h>
+#include <linux/atmel-mci.h>
 
 #include <asm/setup.h>
-#include <asm/atmel-mci.h>
 
 #include <mach/at32ap700x.h>
 #include <mach/board.h>
@@ -131,23 +131,7 @@ static int __init atstk1003_init(void)
 	 * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
 	 * SDRAM-specific pins so that nobody messes with them.
 	 */
-	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
-	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
-	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
-	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
-	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
-	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
-	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
-	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
-	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
-	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
-	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
-	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
-	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
-	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
-	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
-	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
-	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
+	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
 
 #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_usart(1);
diff --git a/trunk/arch/avr32/boards/atstk1000/atstk1004.c b/trunk/arch/avr32/boards/atstk1000/atstk1004.c
index cb32eb844aa7..29b35aca96cd 100644
--- a/trunk/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/trunk/arch/avr32/boards/atstk1000/atstk1004.c
@@ -17,11 +17,11 @@
 
 #include <linux/spi/at73c213.h>
 #include <linux/spi/spi.h>
+#include <linux/atmel-mci.h>
 
 #include <video/atmel_lcdc.h>
 
 #include <asm/setup.h>
-#include <asm/atmel-mci.h>
 
 #include <mach/at32ap700x.h>
 #include <mach/board.h>
diff --git a/trunk/arch/avr32/boards/favr-32/setup.c b/trunk/arch/avr32/boards/favr-32/setup.c
index 1ee4faf0742d..745c408c2ac5 100644
--- a/trunk/arch/avr32/boards/favr-32/setup.c
+++ b/trunk/arch/avr32/boards/favr-32/setup.c
@@ -17,6 +17,7 @@
 #include <linux/linkage.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/atmel-mci.h>
 #include <linux/atmel-pwm-bl.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -79,6 +80,14 @@ static struct spi_board_info __initdata spi1_board_info[] = {
 	},
 };
 
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -ENODEV,
+		.wp_pin		= -ENODEV,
+	},
+};
+
 static struct fb_videomode __initdata lb104v03_modes[] = {
 	{
 		.name		= "640x480 @ 50",
@@ -307,28 +316,10 @@ static int __init favr32_init(void)
 	 * Favr-32 uses 32-bit SDRAM interface. Reserve the SDRAM-specific
 	 * pins so that nobody messes with them.
 	 */
-	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
-	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
-	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
-	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
-	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
-	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
-	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
-	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
-	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
-	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
-	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
-	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
-	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
-	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
-	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
-	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
-	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
+	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
 
 	at32_select_gpio(GPIO_PIN_PB(3), 0);	/* IRQ from ADS7843 */
 
-	at32_add_system_devices();
-
 	at32_add_device_usart(0);
 
 	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
@@ -339,7 +330,7 @@ static int __init favr32_init(void)
 
 	at32_add_device_pwm(1 << atmel_pwm_bl_pdata.pwm_channel);
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
-	at32_add_device_mci(0, NULL);
+	at32_add_device_mci(0, &mci0_data);
 	at32_add_device_usba(0, NULL);
 	at32_add_device_lcdc(0, &favr32_lcdc_data, fbmem_start, fbmem_size, 0);
 
diff --git a/trunk/arch/avr32/boards/hammerhead/Kconfig b/trunk/arch/avr32/boards/hammerhead/Kconfig
new file mode 100644
index 000000000000..fda2331f9789
--- /dev/null
+++ b/trunk/arch/avr32/boards/hammerhead/Kconfig
@@ -0,0 +1,43 @@
+# Hammerhead customization
+
+if BOARD_HAMMERHEAD
+
+config BOARD_HAMMERHEAD_USB
+	bool "Philips ISP116x-hcd USB support"
+	help
+	  This enables USB support for Hammerheads internal ISP116x
+	  controller from Philips.
+
+	  Choose 'Y' here if you want to have your board USB driven.
+
+config BOARD_HAMMERHEAD_LCD
+	bool "Atmel AT91/AT32 LCD support"
+	help
+	  This enables LCD support for the Hammerhead board. You may
+	  also add support for framebuffer devices (AT91/AT32 LCD Controller)
+	  and framebuffer console support to get the most out of your LCD.
+
+	  Choose 'Y' here if you have ordered a Corona daugther board and
+	  want to have support for your Hantronix HDA-351T-LV LCD.
+
+config BOARD_HAMMERHEAD_SND
+	bool "Atmel AC97 Sound support"
+	help
+	  This enables Sound support for the Hammerhead board. You may
+	  also go trough the ALSA settings to get it working.
+
+	  Choose 'Y' here if you have ordered a Corona daugther board and
+	  want to make your board funky.
+
+config BOARD_HAMMERHEAD_FPGA
+	bool "Hammerhead FPGA Support"
+	default y
+	help
+	  This adds support for the Cyclone III FPGA from Altera
+	  found on Miromico's Hammerhead board.
+
+	  Choose 'Y' here if you want to have FPGA support enabled.
+	  You will have to choose the "Hammerhead FPGA Device Support" in
+	  Device Drivers->Misc to be able to use FPGA functionality.
+
+endif	# BOARD_ATNGW100
diff --git a/trunk/arch/avr32/boards/hammerhead/Makefile b/trunk/arch/avr32/boards/hammerhead/Makefile
new file mode 100644
index 000000000000..c740aa116755
--- /dev/null
+++ b/trunk/arch/avr32/boards/hammerhead/Makefile
@@ -0,0 +1 @@
+obj-y				+= setup.o flash.o
diff --git a/trunk/arch/avr32/boards/hammerhead/flash.c b/trunk/arch/avr32/boards/hammerhead/flash.c
new file mode 100644
index 000000000000..a98c6dd3a028
--- /dev/null
+++ b/trunk/arch/avr32/boards/hammerhead/flash.c
@@ -0,0 +1,377 @@
+/*
+ * Hammerhead board-specific flash initialization
+ *
+ * Copyright (C) 2008 Miromico AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/usb/isp116x.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <mach/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/smc.h>
+
+#include "../../mach-at32ap/clock.h"
+#include "flash.h"
+
+
+#define HAMMERHEAD_USB_PERIPH_GCLK0	0x40000000
+#define HAMMERHEAD_USB_PERIPH_CS2	0x02000000
+#define HAMMERHEAD_USB_PERIPH_EXTINT0	0x02000000
+
+#define HAMMERHEAD_FPGA_PERIPH_MOSI	0x00000002
+#define HAMMERHEAD_FPGA_PERIPH_SCK	0x00000020
+#define HAMMERHEAD_FPGA_PERIPH_EXTINT3	0x10000000
+
+static struct smc_timing flash_timing __initdata = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 40,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 10,
+
+	.ncs_read_pulse		= 80,
+	.nrd_pulse		= 40,
+	.ncs_write_pulse	= 65,
+	.nwe_pulse		= 55,
+
+	.read_cycle		= 120,
+	.write_cycle		= 120,
+};
+
+static struct smc_config flash_config __initdata = {
+	.bus_width		= 2,
+	.nrd_controlled		= 1,
+	.nwe_controlled		= 1,
+	.byte_write		= 1,
+};
+
+static struct mtd_partition flash_parts[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0x00000000,
+		.size		= 0x00020000,           /* 128 KiB */
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "root",
+		.offset		= 0x00020000,
+		.size		= 0x007d0000,
+	},
+	{
+		.name		= "env",
+		.offset		= 0x007f0000,
+		.size		= 0x00010000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(flash_parts),
+	.parts		= flash_parts,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x00000000,
+	.end		= 0x007fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= { .platform_data = &flash_data, },
+};
+
+#ifdef CONFIG_BOARD_HAMMERHEAD_USB
+
+static struct smc_timing isp1160_timing __initdata = {
+	.ncs_read_setup		= 75,
+	.nrd_setup		= 75,
+	.ncs_write_setup	= 75,
+	.nwe_setup		= 75,
+
+
+	/* We use conservative timing settings, as the minimal settings aren't
+	   stable. There may be room for tweaking. */
+	.ncs_read_pulse		= 75,  /* min. 33ns */
+	.nrd_pulse		= 75,  /* min. 33ns */
+	.ncs_write_pulse	= 75,  /* min. 26ns */
+	.nwe_pulse		= 75,  /* min. 26ns */
+
+	.read_cycle		= 225, /* min. 143ns */
+	.write_cycle		= 225, /* min. 136ns */
+};
+
+static struct smc_config isp1160_config __initdata = {
+	.bus_width		= 2,
+	.nrd_controlled		= 1,
+	.nwe_controlled		= 1,
+	.byte_write		= 0,
+};
+
+/*
+ * The platform delay function is only used to enforce the strange
+ * read to write delay. This can not be configured in the SMC. All other
+ * timings are controlled by the SMC (see timings obove)
+ * So in isp116x-hcd.c we should comment out USE_PLATFORM_DELAY
+ */
+void isp116x_delay(struct device *dev, int delay)
+{
+	if (delay > 150)
+		ndelay(delay - 150);
+}
+
+static struct  isp116x_platform_data isp1160_data = {
+	.sel15Kres		= 1,	/* use internal downstream resistors */
+	.oc_enable		= 0,	/* external overcurrent detection */
+	.int_edge_triggered	= 0,	/* interrupt is level triggered */
+	.int_act_high		= 0,	/* interrupt is active low */
+	.delay = isp116x_delay,		/* platform delay function */
+};
+
+static struct resource isp1160_resource[] = {
+	{
+		.start		= 0x08000000,
+		.end		= 0x08000001,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 0x08000002,
+		.end		= 0x08000003,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device isp1160_device = {
+	.name		= "isp116x-hcd",
+	.id		= 0,
+	.resource	= isp1160_resource,
+	.num_resources	= 3,
+	.dev		= {
+		.platform_data = &isp1160_data,
+	},
+};
+#endif
+
+#ifdef CONFIG_BOARD_HAMMERHEAD_USB
+static int __init hammerhead_usbh_init(void)
+{
+	struct clk *gclk;
+	struct clk *osc;
+
+	int ret;
+
+	/* setup smc for usbh */
+	smc_set_timing(&isp1160_config, &isp1160_timing);
+	ret = smc_set_configuration(2, &isp1160_config);
+
+	if (ret < 0) {
+		printk(KERN_ERR
+		       "hammerhead: failed to set ISP1160 USBH timing\n");
+		return ret;
+	}
+
+	/* setup gclk0 to run from osc1 */
+	gclk = clk_get(NULL, "gclk0");
+	if (IS_ERR(gclk))
+		goto err_gclk;
+
+	osc = clk_get(NULL, "osc1");
+	if (IS_ERR(osc))
+		goto err_osc;
+
+	if (clk_set_parent(gclk, osc)) {
+		pr_debug("hammerhead: failed to set osc1 for USBH clock\n");
+		goto err_set_clk;
+	}
+
+	/* set clock to 6MHz */
+	clk_set_rate(gclk, 6000000);
+
+	/* and enable */
+	clk_enable(gclk);
+
+	/* select GCLK0 peripheral function */
+	at32_select_periph(GPIO_PIOA_BASE, HAMMERHEAD_USB_PERIPH_GCLK0,
+			   GPIO_PERIPH_A, 0);
+
+	/* enable CS2 peripheral function */
+	at32_select_periph(GPIO_PIOE_BASE, HAMMERHEAD_USB_PERIPH_CS2,
+			   GPIO_PERIPH_A, 0);
+
+	/* H_WAKEUP must be driven low */
+	at32_select_gpio(GPIO_PIN_PA(8), AT32_GPIOF_OUTPUT);
+
+	/* Select EXTINT0 for PB25 */
+	at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_USB_PERIPH_EXTINT0,
+			   GPIO_PERIPH_A, 0);
+
+	/* register usbh device driver */
+	platform_device_register(&isp1160_device);
+
+ err_set_clk:
+	clk_put(osc);
+ err_osc:
+	clk_put(gclk);
+ err_gclk:
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_BOARD_HAMMERHEAD_FPGA
+static struct smc_timing fpga_timing __initdata = {
+	.ncs_read_setup		= 16,
+	.nrd_setup		= 32,
+	.ncs_read_pulse		= 48,
+	.nrd_pulse		= 32,
+	.read_cycle		= 64,
+
+	.ncs_write_setup	= 16,
+	.nwe_setup		= 16,
+	.ncs_write_pulse	= 32,
+	.nwe_pulse		= 32,
+	.write_cycle		= 64,
+};
+
+static struct smc_config fpga_config __initdata = {
+	.bus_width		= 4,
+	.nrd_controlled		= 1,
+	.nwe_controlled		= 1,
+	.byte_write		= 0,
+};
+
+static struct resource hh_fpga0_resource[] = {
+	{
+		.start		= 0xffe00400,
+		.end		= 0xffe00400 + 0x3ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 4,
+		.end		= 4,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 0x0c000000,
+		.end		= 0x0c000100,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 67,
+		.end		= 67,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 hh_fpga0_dma_mask = DMA_32BIT_MASK;
+static struct platform_device hh_fpga0_device = {
+	.name		= "hh_fpga",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &hh_fpga0_dma_mask,
+		.coherent_dma_mask = DMA_32BIT_MASK,
+	},
+	.resource	= hh_fpga0_resource,
+	.num_resources	= ARRAY_SIZE(hh_fpga0_resource),
+};
+
+static struct clk hh_fpga0_spi_clk = {
+	.name		= "spi_clk",
+	.dev		= &hh_fpga0_device.dev,
+	.mode		= pba_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 1,
+};
+
+struct platform_device *__init at32_add_device_hh_fpga(void)
+{
+	/* Select peripheral functionallity for SPI SCK and MOSI */
+	at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_FPGA_PERIPH_SCK,
+			   GPIO_PERIPH_B, 0);
+	at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_FPGA_PERIPH_MOSI,
+			   GPIO_PERIPH_B, 0);
+
+	/* reserve all other needed gpio
+	 * We have on board pull ups, so there is no need
+	 * to enable gpio pull ups */
+	/* INIT_DONE (input) */
+	at32_select_gpio(GPIO_PIN_PB(0), 0);
+
+	/* nSTATUS (input) */
+	at32_select_gpio(GPIO_PIN_PB(2), 0);
+
+	/* nCONFIG (output, low) */
+	at32_select_gpio(GPIO_PIN_PB(3), AT32_GPIOF_OUTPUT);
+
+	/* CONF_DONE (input) */
+	at32_select_gpio(GPIO_PIN_PB(4), 0);
+
+	/* Select EXTINT3 for PB28 (Interrupt from FPGA) */
+	at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_FPGA_PERIPH_EXTINT3,
+			   GPIO_PERIPH_A, 0);
+
+	/* Get our parent clock */
+	hh_fpga0_spi_clk.parent = clk_get(NULL, "pba");
+	clk_put(hh_fpga0_spi_clk.parent);
+
+	/* Register clock in at32 clock tree */
+	at32_clk_register(&hh_fpga0_spi_clk);
+
+	platform_device_register(&hh_fpga0_device);
+	return &hh_fpga0_device;
+}
+#endif
+
+/* This needs to be called after the SMC has been initialized */
+static int __init hammerhead_flash_init(void)
+{
+	int ret;
+
+	smc_set_timing(&flash_config, &flash_timing);
+	ret = smc_set_configuration(0, &flash_config);
+
+	if (ret < 0) {
+		printk(KERN_ERR "hammerhead: failed to set NOR flash timing\n");
+		return ret;
+	}
+
+	platform_device_register(&flash_device);
+
+#ifdef CONFIG_BOARD_HAMMERHEAD_USB
+	hammerhead_usbh_init();
+#endif
+
+#ifdef CONFIG_BOARD_HAMMERHEAD_FPGA
+	/* Setup SMC for FPGA interface */
+	smc_set_timing(&fpga_config, &fpga_timing);
+	ret = smc_set_configuration(3, &fpga_config);
+#endif
+
+
+	if (ret < 0) {
+		printk(KERN_ERR "hammerhead: failed to set FPGA timing\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+device_initcall(hammerhead_flash_init);
diff --git a/trunk/arch/avr32/boards/hammerhead/flash.h b/trunk/arch/avr32/boards/hammerhead/flash.h
new file mode 100644
index 000000000000..ea70c626587b
--- /dev/null
+++ b/trunk/arch/avr32/boards/hammerhead/flash.h
@@ -0,0 +1,6 @@
+#ifndef __BOARDS_HAMMERHEAD_FLASH_H
+#define __BOARDS_HAMMERHEAD_FLASH_H
+
+struct platform_device *at32_add_device_hh_fpga(void);
+
+#endif /* __BOARDS_HAMMERHEAD_FLASH_H */
diff --git a/trunk/arch/avr32/boards/hammerhead/setup.c b/trunk/arch/avr32/boards/hammerhead/setup.c
new file mode 100644
index 000000000000..4d2fe82b2029
--- /dev/null
+++ b/trunk/arch/avr32/boards/hammerhead/setup.c
@@ -0,0 +1,245 @@
+/*
+ * Board-specific setup code for the Miromico Hammerhead board
+ *
+ * Copyright (C) 2008 Miromico AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/atmel-mci.h>
+#include <linux/clk.h>
+#include <linux/fb.h>
+#include <linux/etherdevice.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/spi/spi.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <linux/io.h>
+#include <asm/setup.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
+
+#include "../../mach-at32ap/clock.h"
+#include "flash.h"
+
+/* Oscillator frequencies. These are board-specific */
+unsigned long at32_board_osc_rates[3] = {
+	[0] = 32768,	/* 32.768 kHz on RTC osc */
+	[1] = 25000000, /* 25MHz on osc0 */
+	[2] = 12000000,	/* 12 MHz on osc1 */
+};
+
+/* Initialized by bootloader-specific startup code. */
+struct tag *bootloader_tags __initdata;
+
+#ifdef CONFIG_BOARD_HAMMERHEAD_LCD
+static struct fb_videomode __initdata hda350tlv_modes[] = {
+	{
+		.name		= "320x240 @ 75",
+		.refresh	= 75,
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= KHZ2PICOS(6891),
+
+		.left_margin	= 48,
+		.right_margin	= 18,
+		.upper_margin	= 18,
+		.lower_margin	= 4,
+		.hsync_len	= 20,
+		.vsync_len	= 2,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs __initdata hammerhead_hda350t_monspecs = {
+	.manufacturer		= "HAN",
+	.monitor		= "HDA350T-LV",
+	.modedb			= hda350tlv_modes,
+	.modedb_len		= ARRAY_SIZE(hda350tlv_modes),
+	.hfmin			= 14900,
+	.hfmax			= 22350,
+	.vfmin			= 60,
+	.vfmax			= 90,
+	.dclkmax		= 10000000,
+};
+
+struct atmel_lcdfb_info __initdata hammerhead_lcdc_data = {
+	.default_bpp		= 24,
+	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
+				   | ATMEL_LCDC_INVCLK
+				   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+				   | ATMEL_LCDC_MEMOR_BIG),
+	.default_monspecs	= &hammerhead_hda350t_monspecs,
+	.guard_time		= 2,
+};
+#endif
+
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -ENODEV,
+		.wp_pin		= -ENODEV,
+	},
+};
+
+struct eth_addr {
+	u8 addr[6];
+};
+
+static struct eth_addr __initdata hw_addr[1];
+static struct eth_platform_data __initdata eth_data[1];
+
+/*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+ * ethernet address. But we need to keep it around for a while until
+ * we can be reasonably sure the boot loader does this.
+ *
+ * The phy_id is ignored as the driver will probe for it.
+ */
+static int __init parse_tag_ethernet(struct tag *tag)
+{
+	int i = tag->u.ethernet.mac_index;
+
+	if (i < ARRAY_SIZE(hw_addr))
+		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
+		       sizeof(hw_addr[i].addr));
+
+	return 0;
+}
+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
+
+static void __init set_hw_addr(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	const u8 *addr;
+	void __iomem *regs;
+	struct clk *pclk;
+
+	if (!res)
+		return;
+
+	if (pdev->id >= ARRAY_SIZE(hw_addr))
+		return;
+
+	addr = hw_addr[pdev->id].addr;
+
+	if (!is_valid_ether_addr(addr))
+		return;
+
+	/*
+	 * Since this is board-specific code, we'll cheat and use the
+	 * physical address directly as we happen to know that it's
+	 * the same as the virtual address.
+	 */
+	regs = (void __iomem __force *)res->start;
+	pclk = clk_get(&pdev->dev, "pclk");
+
+	if (!pclk)
+		return;
+
+	clk_enable(pclk);
+
+	__raw_writel((addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) |
+		     addr[0], regs + 0x98);
+	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
+
+	clk_disable(pclk);
+	clk_put(pclk);
+}
+
+void __init setup_board(void)
+{
+	at32_map_usart(1, 0);	/* USART 1: /dev/ttyS0, DB9 */
+	at32_setup_serial_console(0);
+}
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin		= GPIO_PIN_PA(6),
+	.scl_pin		= GPIO_PIN_PA(7),
+	.sda_is_open_drain	= 1,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,	/* close to 100 kHz */
+};
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= { .platform_data = &i2c_gpio_data, },
+};
+
+static struct i2c_board_info __initdata i2c_info[] = {};
+
+#ifdef CONFIG_BOARD_HAMMERHEAD_SND
+static struct ac97c_platform_data ac97c_data = {
+	.reset_pin = GPIO_PIN_PA(16),
+};
+#endif
+
+static int __init hammerhead_init(void)
+{
+	/*
+	 * Hammerhead uses 32-bit SDRAM interface. Reserve the
+	 * SDRAM-specific pins so that nobody messes with them.
+	 */
+	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
+
+	at32_add_device_usart(0);
+
+	/* Reserve PB29 (GCLK3). This pin is used as clock source
+	 * for ETH PHY (25MHz). GCLK3 setup is done by U-Boot.
+	 */
+	at32_reserve_pin(GPIO_PIOB_BASE, (1<<29));
+
+	/*
+	 * Hammerhead uses only one ethernet port, so we don't set
+	 * address of second port
+	 */
+	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+
+#ifdef CONFIG_BOARD_HAMMERHEAD_FPGA
+	at32_add_device_hh_fpga();
+#endif
+	at32_add_device_mci(0, &mci0_data);
+
+#ifdef CONFIG_BOARD_HAMMERHEAD_USB
+	at32_add_device_usba(0, NULL);
+#endif
+#ifdef CONFIG_BOARD_HAMMERHEAD_LCD
+	at32_add_device_lcdc(0, &hammerhead_lcdc_data, fbmem_start,
+			     fbmem_size, ATMEL_LCDC_PRI_24BIT);
+#endif
+
+	at32_select_gpio(i2c_gpio_data.sda_pin,
+			 AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT |
+			 AT32_GPIOF_HIGH);
+	at32_select_gpio(i2c_gpio_data.scl_pin,
+			 AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT |
+			 AT32_GPIOF_HIGH);
+	platform_device_register(&i2c_gpio_device);
+	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
+
+#ifdef CONFIG_BOARD_HAMMERHEAD_SND
+	at32_add_device_ac97c(0, &ac97c_data);
+#endif
+
+	/* Select the Touchscreen interrupt pin mode */
+	at32_select_periph(GPIO_PIOB_BASE, 0x08000000, GPIO_PERIPH_A, 0);
+
+	return 0;
+}
+
+postcore_initcall(hammerhead_init);
diff --git a/trunk/arch/avr32/boards/mimc200/setup.c b/trunk/arch/avr32/boards/mimc200/setup.c
index 397cbb8f44c8..2b58d61f0afc 100644
--- a/trunk/arch/avr32/boards/mimc200/setup.c
+++ b/trunk/arch/avr32/boards/mimc200/setup.c
@@ -24,7 +24,7 @@ extern struct atmel_lcdfb_info mimc200_lcdc_data;
 #include <video/atmel_lcdc.h>
 #include <linux/fb.h>
 
-#include <asm/atmel-mci.h>
+#include <linux/atmel-mci.h>
 #include <linux/io.h>
 #include <asm/setup.h>
 
@@ -207,8 +207,6 @@ static int __init mimc200_init(void)
 	 * reserve any pins for it.
 	 */
 
-	at32_add_system_devices();
-
 	at32_add_device_usart(0);
 	at32_add_device_usart(1);
 	at32_add_device_usart(2);
diff --git a/trunk/arch/avr32/configs/atngw100_defconfig b/trunk/arch/avr32/configs/atngw100_defconfig
index 541520912c55..164e2814ae78 100644
--- a/trunk/arch/avr32/configs/atngw100_defconfig
+++ b/trunk/arch/avr32/configs/atngw100_defconfig
@@ -892,7 +892,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
-CONFIG_DMATEST=m
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 
 #
diff --git a/trunk/arch/avr32/configs/atstk1002_defconfig b/trunk/arch/avr32/configs/atstk1002_defconfig
index 69fce6b6a783..c9dc64832a19 100644
--- a/trunk/arch/avr32/configs/atstk1002_defconfig
+++ b/trunk/arch/avr32/configs/atstk1002_defconfig
@@ -964,7 +964,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
-CONFIG_DMATEST=m
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 
 #
diff --git a/trunk/arch/avr32/configs/atstk1003_defconfig b/trunk/arch/avr32/configs/atstk1003_defconfig
index 5477ed3183b4..29ea1327b498 100644
--- a/trunk/arch/avr32/configs/atstk1003_defconfig
+++ b/trunk/arch/avr32/configs/atstk1003_defconfig
@@ -882,7 +882,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
-CONFIG_DMATEST=m
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 
 #
diff --git a/trunk/arch/avr32/configs/atstk1006_defconfig b/trunk/arch/avr32/configs/atstk1006_defconfig
index 6c45a3b77aa3..361c31c2af10 100644
--- a/trunk/arch/avr32/configs/atstk1006_defconfig
+++ b/trunk/arch/avr32/configs/atstk1006_defconfig
@@ -1014,7 +1014,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
-CONFIG_DMATEST=m
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 CONFIG_STAGING_EXCLUDE_BUILD=y
diff --git a/trunk/arch/avr32/configs/hammerhead_defconfig b/trunk/arch/avr32/configs/hammerhead_defconfig
new file mode 100644
index 000000000000..0d3d2982c8f5
--- /dev/null
+++ b/trunk/arch/avr32/configs/hammerhead_defconfig
@@ -0,0 +1,1467 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27
+# Tue Dec  9 15:37:30 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System Type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_BOARD_ATSTK1000 is not set
+# CONFIG_BOARD_ATNGW100 is not set
+CONFIG_BOARD_HAMMERHEAD=y
+# CONFIG_BOARD_FAVR_32 is not set
+# CONFIG_BOARD_MIMC200 is not set
+CONFIG_BOARD_HAMMERHEAD_USB=y
+CONFIG_BOARD_HAMMERHEAD_LCD=y
+CONFIG_BOARD_HAMMERHEAD_SND=y
+# CONFIG_BOARD_HAMMERHEAD_FPGA is not set
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x80000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AT32PSIF is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_ISP116X_HCD=m
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/trunk/arch/avr32/include/asm/kdebug.h b/trunk/arch/avr32/include/asm/kdebug.h
index ca4f9542365a..f930ce286803 100644
--- a/trunk/arch/avr32/include/asm/kdebug.h
+++ b/trunk/arch/avr32/include/asm/kdebug.h
@@ -6,6 +6,7 @@ enum die_val {
 	DIE_BREAKPOINT,
 	DIE_SSTEP,
 	DIE_NMI,
+	DIE_OOPS,
 };
 
 #endif /* __ASM_AVR32_KDEBUG_H */
diff --git a/trunk/arch/avr32/include/asm/syscalls.h b/trunk/arch/avr32/include/asm/syscalls.h
new file mode 100644
index 000000000000..483d666c27c0
--- /dev/null
+++ b/trunk/arch/avr32/include/asm/syscalls.h
@@ -0,0 +1,39 @@
+/*
+ * syscalls.h - Linux syscall interfaces (arch-specific)
+ *
+ * Copyright (c) 2008 Jaswinder Singh
+ *
+ * This file is released under the GPLv2.
+ * See the file COPYING for more details.
+ */
+
+#ifndef _ASM_AVR32_SYSCALLS_H
+#define _ASM_AVR32_SYSCALLS_H
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/signal.h>
+
+/* kernel/process.c */
+asmlinkage int sys_fork(struct pt_regs *);
+asmlinkage int sys_clone(unsigned long, unsigned long,
+			 unsigned long, unsigned long,
+			 struct pt_regs *);
+asmlinkage int sys_vfork(struct pt_regs *);
+asmlinkage int sys_execve(char __user *, char __user *__user *,
+			  char __user *__user *, struct pt_regs *);
+
+/* kernel/signal.c */
+asmlinkage int sys_sigaltstack(const stack_t __user *, stack_t __user *,
+			       struct pt_regs *);
+asmlinkage int sys_rt_sigreturn(struct pt_regs *);
+
+/* kernel/sys_avr32.c */
+asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long,
+			  unsigned long, unsigned long, off_t);
+
+/* mm/cache.c */
+asmlinkage int sys_cacheflush(int, void __user *, size_t);
+
+#endif /* _ASM_AVR32_SYSCALLS_H */
diff --git a/trunk/arch/avr32/kernel/process.c b/trunk/arch/avr32/kernel/process.c
index 134d5302b6dd..43ae555ecb33 100644
--- a/trunk/arch/avr32/kernel/process.c
+++ b/trunk/arch/avr32/kernel/process.c
@@ -18,6 +18,7 @@
 
 #include <asm/sysreg.h>
 #include <asm/ocd.h>
+#include <asm/syscalls.h>
 
 #include <mach/pm.h>
 
diff --git a/trunk/arch/avr32/kernel/signal.c b/trunk/arch/avr32/kernel/signal.c
index c5b11f9067f1..803d7be0938f 100644
--- a/trunk/arch/avr32/kernel/signal.c
+++ b/trunk/arch/avr32/kernel/signal.c
@@ -19,6 +19,7 @@
 
 #include <asm/uaccess.h>
 #include <asm/ucontext.h>
+#include <asm/syscalls.h>
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
diff --git a/trunk/arch/avr32/kernel/sys_avr32.c b/trunk/arch/avr32/kernel/sys_avr32.c
index 8e8911e55c8f..5d2daeaf356f 100644
--- a/trunk/arch/avr32/kernel/sys_avr32.c
+++ b/trunk/arch/avr32/kernel/sys_avr32.c
@@ -13,6 +13,7 @@
 
 #include <asm/mman.h>
 #include <asm/uaccess.h>
+#include <asm/syscalls.h>
 
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 			  unsigned long prot, unsigned long flags,
diff --git a/trunk/arch/avr32/mach-at32ap/at32ap700x.c b/trunk/arch/avr32/mach-at32ap/at32ap700x.c
index 066252eebf61..ea7bc1e8562b 100644
--- a/trunk/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/trunk/arch/avr32/mach-at32ap/at32ap700x.c
@@ -15,8 +15,8 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
+#include <linux/atmel-mci.h>
 
-#include <asm/atmel-mci.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
@@ -421,7 +421,7 @@ static unsigned long hsb_clk_get_rate(struct clk *clk)
 	return bus_clk_get_rate(clk, shift);
 }
 
-static void pba_clk_mode(struct clk *clk, int enabled)
+void pba_clk_mode(struct clk *clk, int enabled)
 {
 	unsigned long flags;
 	u32 mask;
@@ -436,7 +436,7 @@ static void pba_clk_mode(struct clk *clk, int enabled)
 	spin_unlock_irqrestore(&pm_lock, flags);
 }
 
-static unsigned long pba_clk_get_rate(struct clk *clk)
+unsigned long pba_clk_get_rate(struct clk *clk)
 {
 	unsigned long cksel, shift = 0;
 
diff --git a/trunk/arch/avr32/mach-at32ap/clock.h b/trunk/arch/avr32/mach-at32ap/clock.h
index 623bf0e9a1e7..4c7ebbdc6dfa 100644
--- a/trunk/arch/avr32/mach-at32ap/clock.h
+++ b/trunk/arch/avr32/mach-at32ap/clock.h
@@ -30,3 +30,6 @@ struct clk {
 	u16		users;		/* Enabled if non-zero */
 	u16		index;		/* Sibling index */
 };
+
+unsigned long pba_clk_get_rate(struct clk *clk);
+void pba_clk_mode(struct clk *clk, int enabled);
diff --git a/trunk/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/trunk/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
index a77d372f6f3e..5c4c971eed8e 100644
--- a/trunk/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
+++ b/trunk/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
@@ -211,4 +211,7 @@
 
 #define ATMEL_LCDC_ALT_15BIT	(ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA)
 
+/* Bitmask for all EBI data (D16..D31) pins on port E */
+#define ATMEL_EBI_PE_DATA_ALL  (0x0000FFFF)
+
 #endif /* __ASM_ARCH_AT32AP700X_H__ */
diff --git a/trunk/arch/avr32/mach-at32ap/include/mach/portmux.h b/trunk/arch/avr32/mach-at32ap/include/mach/portmux.h
index 21c79373b53f..4873024e3b96 100644
--- a/trunk/arch/avr32/mach-at32ap/include/mach/portmux.h
+++ b/trunk/arch/avr32/mach-at32ap/include/mach/portmux.h
@@ -25,6 +25,6 @@ void at32_select_periph(unsigned int port, unsigned int pin,
 			unsigned int periph, unsigned long flags);
 void at32_select_gpio(unsigned int pin, unsigned long flags);
 void at32_deselect_pin(unsigned int pin);
-void at32_reserve_pin(unsigned int pin);
+void at32_reserve_pin(unsigned int port, u32 pin_mask);
 
 #endif /* __ASM_ARCH_PORTMUX_H__ */
diff --git a/trunk/arch/avr32/mach-at32ap/pio.c b/trunk/arch/avr32/mach-at32ap/pio.c
index ed81a8bcb22d..09a274c9d0b7 100644
--- a/trunk/arch/avr32/mach-at32ap/pio.c
+++ b/trunk/arch/avr32/mach-at32ap/pio.c
@@ -167,22 +167,29 @@ void at32_deselect_pin(unsigned int pin)
 }
 
 /* Reserve a pin, preventing anyone else from changing its configuration. */
-void __init at32_reserve_pin(unsigned int pin)
+void __init at32_reserve_pin(unsigned int port, u32 pin_mask)
 {
 	struct pio_device *pio;
-	unsigned int pin_index = pin & 0x1f;
 
-	pio = gpio_to_pio(pin);
+	/* assign and verify pio */
+	pio = gpio_to_pio(port);
 	if (unlikely(!pio)) {
-		printk("pio: invalid pin %u\n", pin);
+		printk(KERN_WARNING "pio: invalid port %u\n", port);
 		goto fail;
 	}
 
-	if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
-		printk("%s: pin %u is busy\n", pio->name, pin_index);
+	/* Test if any of the requested pins is already muxed */
+	spin_lock(&pio_lock);
+	if (unlikely(pio->pinmux_mask & pin_mask)) {
+		printk(KERN_WARNING "%s: pin(s) busy (req. 0x%x, busy 0x%x)\n",
+		       pio->name, pin_mask, pio->pinmux_mask & pin_mask);
+		spin_unlock(&pio_lock);
 		goto fail;
 	}
 
+	/* Reserve pins */
+	pio->pinmux_mask |= pin_mask;
+	spin_unlock(&pio_lock);
 	return;
 
 fail:
diff --git a/trunk/arch/avr32/mm/cache.c b/trunk/arch/avr32/mm/cache.c
index 15a4e5e142c1..24a74d1ca7d9 100644
--- a/trunk/arch/avr32/mm/cache.c
+++ b/trunk/arch/avr32/mm/cache.c
@@ -13,6 +13,7 @@
 #include <asm/cachectl.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
+#include <asm/syscalls.h>
 
 /*
  * If you attempt to flush anything more than this, you need superuser
diff --git a/trunk/arch/avr32/mm/init.c b/trunk/arch/avr32/mm/init.c
index fa92ff6d95f7..e819fa69a90e 100644
--- a/trunk/arch/avr32/mm/init.c
+++ b/trunk/arch/avr32/mm/init.c
@@ -97,7 +97,6 @@ void __init paging_init(void)
 
 	mem_map = NODE_DATA(0)->node_mem_map;
 
-	memset(zero_page, 0, PAGE_SIZE);
 	empty_zero_page = virt_to_page(zero_page);
 	flush_dcache_page(empty_zero_page);
 }
diff --git a/trunk/arch/blackfin/kernel/kgdb.c b/trunk/arch/blackfin/kernel/kgdb.c
index b795a207742c..1c5afaeb9504 100644
--- a/trunk/arch/blackfin/kernel/kgdb.c
+++ b/trunk/arch/blackfin/kernel/kgdb.c
@@ -105,7 +105,7 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
  * Extracts ebp, esp and eip values understandable by gdb from the values
  * saved by switch_to.
  * thread.esp points to ebp. flags and ebp are pushed in switch_to hence esp
- * prior to entering switch_to is 8 greater then the value that is saved.
+ * prior to entering switch_to is 8 greater than the value that is saved.
  * If switch_to changes, change following code appropriately.
  */
 void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
diff --git a/trunk/arch/cris/arch-v32/kernel/signal.c b/trunk/arch/cris/arch-v32/kernel/signal.c
index da7d2be000ba..372d0ca6efbc 100644
--- a/trunk/arch/cris/arch-v32/kernel/signal.c
+++ b/trunk/arch/cris/arch-v32/kernel/signal.c
@@ -456,7 +456,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	return -EFAULT;
 }
 
-/* Invoke a singal handler to, well, handle the signal. */
+/* Invoke a signal handler to, well, handle the signal. */
 static inline int
 handle_signal(int canrestart, unsigned long sig,
 	      siginfo_t *info, struct k_sigaction *ka,
diff --git a/trunk/arch/ia64/kernel/kprobes.c b/trunk/arch/ia64/kernel/kprobes.c
index 097b84d54e73..f90be51b1123 100644
--- a/trunk/arch/ia64/kernel/kprobes.c
+++ b/trunk/arch/ia64/kernel/kprobes.c
@@ -434,7 +434,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	/*
 	 * It is possible to have multiple instances associated with a given
 	 * task either because an multiple functions in the call path
-	 * have a return probe installed on them, and/or more then one return
+	 * have a return probe installed on them, and/or more than one return
 	 * return probe was registered for a target function.
 	 *
 	 * We can handle this because:
diff --git a/trunk/arch/m68k/Kconfig b/trunk/arch/m68k/Kconfig
index c825bde17cb3..fb87c08c6b57 100644
--- a/trunk/arch/m68k/Kconfig
+++ b/trunk/arch/m68k/Kconfig
@@ -303,7 +303,7 @@ config M68KFPU_EMU_EXTRAPREC
 	  correct rounding, the emulator can (often) do the same but this
 	  extra calculation can cost quite some time, so you can disable
 	  it here. The emulator will then "only" calculate with a 64 bit
-	  mantissa and round slightly incorrect, what is more then enough
+	  mantissa and round slightly incorrect, what is more than enough
 	  for normal usage.
 
 config M68KFPU_EMU_ONLY
diff --git a/trunk/arch/m68k/kernel/traps.c b/trunk/arch/m68k/kernel/traps.c
index 6d813de2baf1..184acc90808d 100644
--- a/trunk/arch/m68k/kernel/traps.c
+++ b/trunk/arch/m68k/kernel/traps.c
@@ -401,7 +401,7 @@ static inline void do_040writebacks(struct frame *fp)
  * called from sigreturn(), must ensure userspace code didn't
  * manipulate exception frame to circumvent protection, then complete
  * pending writebacks
- * we just clear TM2 to turn it into an userspace access
+ * we just clear TM2 to turn it into a userspace access
  */
 asmlinkage void berr_040cleanup(struct frame *fp)
 {
diff --git a/trunk/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c b/trunk/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
index 97862f45496d..caf5e9a0acc7 100644
--- a/trunk/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
+++ b/trunk/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
@@ -148,7 +148,7 @@ int read_eeprom(char *buffer, int eeprom_size, int size)
 	send_byte(W_HEADER);
 	recv_ack();
 
-	/* EEPROM with size of more then 2K need two byte addressing */
+	/* EEPROM with size of more than 2K need two byte addressing */
 	if (eeprom_size > 2048) {
 		send_byte(0x00);
 		recv_ack();
diff --git a/trunk/arch/powerpc/boot/Makefile b/trunk/arch/powerpc/boot/Makefile
index f32829937aad..ab6dda372438 100644
--- a/trunk/arch/powerpc/boot/Makefile
+++ b/trunk/arch/powerpc/boot/Makefile
@@ -208,7 +208,7 @@ image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
 #
 # Theses are default targets to build images which embed device tree blobs.
 # They are only required on boards which do not have FDT support in firmware.
-# Boards with newish u-boot firmare can use the uImage target above
+# Boards with newish u-boot firmware can use the uImage target above
 #
 
 # Board ports in arch/powerpc/platform/40x/Kconfig
diff --git a/trunk/arch/powerpc/kernel/kprobes.c b/trunk/arch/powerpc/kernel/kprobes.c
index 989edcdf0297..c9329786073b 100644
--- a/trunk/arch/powerpc/kernel/kprobes.c
+++ b/trunk/arch/powerpc/kernel/kprobes.c
@@ -317,7 +317,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	/*
 	 * It is possible to have multiple instances associated with a given
 	 * task either because an multiple functions in the call path
-	 * have a return probe installed on them, and/or more then one return
+	 * have a return probe installed on them, and/or more than one return
 	 * return probe was registered for a target function.
 	 *
 	 * We can handle this because:
diff --git a/trunk/arch/powerpc/oprofile/cell/spu_profiler.c b/trunk/arch/powerpc/oprofile/cell/spu_profiler.c
index dd499c3e9da7..83faa958b9d4 100644
--- a/trunk/arch/powerpc/oprofile/cell/spu_profiler.c
+++ b/trunk/arch/powerpc/oprofile/cell/spu_profiler.c
@@ -49,7 +49,7 @@ void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_rese
 	 * of precision.  This is close enough for the purpose at hand.
 	 *
 	 * The value of the timeout should be small enough that the hw
-	 * trace buffer will not get more then about 1/3 full for the
+	 * trace buffer will not get more than about 1/3 full for the
 	 * maximum user specified (the LFSR value) hw sampling frequency.
 	 * This is to ensure the trace buffer will never fill even if the
 	 * kernel thread scheduling varies under a heavy system load.
diff --git a/trunk/arch/s390/Kconfig b/trunk/arch/s390/Kconfig
index 19577aeffd7b..a94a3c3ae932 100644
--- a/trunk/arch/s390/Kconfig
+++ b/trunk/arch/s390/Kconfig
@@ -299,7 +299,7 @@ config WARN_STACK
 	  This option enables the compiler options -mwarn-framesize and
 	  -mwarn-dynamicstack. If the compiler supports these options it
 	  will generate warnings for function which either use alloca or
-	  create a stack frame bigger then CONFIG_WARN_STACK_SIZE.
+	  create a stack frame bigger than CONFIG_WARN_STACK_SIZE.
 
 	  Say N if you are unsure.
 
diff --git a/trunk/arch/s390/kernel/kprobes.c b/trunk/arch/s390/kernel/kprobes.c
index 9b92856632cf..a01cf0284db2 100644
--- a/trunk/arch/s390/kernel/kprobes.c
+++ b/trunk/arch/s390/kernel/kprobes.c
@@ -382,7 +382,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	/*
 	 * It is possible to have multiple instances associated with a given
 	 * task either because an multiple functions in the call path
-	 * have a return probe installed on them, and/or more then one return
+	 * have a return probe installed on them, and/or more than one return
 	 * return probe was registered for a target function.
 	 *
 	 * We can handle this because:
diff --git a/trunk/arch/sparc/kernel/kprobes.c b/trunk/arch/sparc/kernel/kprobes.c
index 201a6e547e4a..3bc6527c95af 100644
--- a/trunk/arch/sparc/kernel/kprobes.c
+++ b/trunk/arch/sparc/kernel/kprobes.c
@@ -517,7 +517,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	/*
 	 * It is possible to have multiple instances associated with a given
 	 * task either because an multiple functions in the call path
-	 * have a return probe installed on them, and/or more then one return
+	 * have a return probe installed on them, and/or more than one return
 	 * return probe was registered for a target function.
 	 *
 	 * We can handle this because:
diff --git a/trunk/arch/x86/kernel/kprobes.c b/trunk/arch/x86/kernel/kprobes.c
index eead6f8f9218..884d985b8b82 100644
--- a/trunk/arch/x86/kernel/kprobes.c
+++ b/trunk/arch/x86/kernel/kprobes.c
@@ -695,7 +695,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	/*
 	 * It is possible to have multiple instances associated with a given
 	 * task either because multiple functions in the call path have
-	 * return probes installed on them, and/or more then one
+	 * return probes installed on them, and/or more than one
 	 * return probe was registered for a target function.
 	 *
 	 * We can handle this because:
diff --git a/trunk/arch/x86/kernel/mfgpt_32.c b/trunk/arch/x86/kernel/mfgpt_32.c
index c12314c9e86f..8815f3c7fec7 100644
--- a/trunk/arch/x86/kernel/mfgpt_32.c
+++ b/trunk/arch/x86/kernel/mfgpt_32.c
@@ -252,7 +252,7 @@ EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer);
 /*
  * The MFPGT timers on the CS5536 provide us with suitable timers to use
  * as clock event sources - not as good as a HPET or APIC, but certainly
- * better then the PIT.  This isn't a general purpose MFGPT driver, but
+ * better than the PIT.  This isn't a general purpose MFGPT driver, but
  * a simplified one designed specifically to act as a clock event source.
  * For full details about the MFGPT, please consult the CS5536 data sheet.
  */
diff --git a/trunk/arch/xtensa/Makefile b/trunk/arch/xtensa/Makefile
index 015b6b2a26b9..1da55fe4beff 100644
--- a/trunk/arch/xtensa/Makefile
+++ b/trunk/arch/xtensa/Makefile
@@ -33,6 +33,15 @@ KBUILD_CFLAGS += -ffreestanding
 
 KBUILD_CFLAGS += -pipe -mlongcalls
 
+vardirs := $(patsubst %,arch/xtensa/variants/%/,$(variant-y))
+plfdirs := $(patsubst %,arch/xtensa/platforms/%/,$(platform-y))
+
+ifeq ($(KBUILD_SRC),)
+KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(vardirs) $(plfdirs))
+else
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(vardirs) $(plfdirs))
+endif
+
 KBUILD_DEFCONFIG := iss_defconfig
 
 # ramdisk/initrd support
@@ -66,21 +75,6 @@ libs-y		+= arch/xtensa/lib/ $(LIBGCC)
 
 boot		:= arch/xtensa/boot
 
-archinc		:= include/asm-xtensa
-
-archprepare: $(archinc)/.platform
-
-# Update processor variant and platform symlinks if something which affects
-# them changed.
-
-$(archinc)/.platform: $(wildcard include/config/arch/*.h) include/config/auto.conf
-	@echo '  SYMLINK $(archinc)/variant -> $(archinc)/variant-$(VARIANT)'
-	$(Q)mkdir -p $(archinc)
-	$(Q)ln -fsn $(srctree)/$(archinc)/variant-$(VARIANT) $(archinc)/variant
-	@echo '  SYMLINK $(archinc)/platform -> $(archinc)/platform-$(PLATFORM)'
-	$(Q)ln -fsn $(srctree)/$(archinc)/platform-$(PLATFORM) $(archinc)/platform
-	@touch $@
-
 
 all: zImage
 
@@ -89,10 +83,6 @@ bzImage : zImage
 zImage zImage.initrd: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $@
 
-CLEAN_FILES	+= arch/xtensa/vmlinux.lds                      \
-		   $(archinc)/platform $(archinc)/variant	\
-		   $(archinc)/.platform
-
 define archhelp
   @echo '* zImage      - Compressed kernel image (arch/xtensa/boot/images/zImage.*)'
 endef
diff --git a/trunk/arch/xtensa/boot/boot-elf/boot.lds.S b/trunk/arch/xtensa/boot/boot-elf/boot.lds.S
index 849dfcafd518..4e53b74dc44b 100644
--- a/trunk/arch/xtensa/boot/boot-elf/boot.lds.S
+++ b/trunk/arch/xtensa/boot/boot-elf/boot.lds.S
@@ -1,4 +1,4 @@
-#include <asm/variant/core.h>
+#include <variant/core.h>
 OUTPUT_ARCH(xtensa)
 ENTRY(_ResetVector)
 
diff --git a/trunk/arch/xtensa/boot/boot-redboot/bootstrap.S b/trunk/arch/xtensa/boot/boot-redboot/bootstrap.S
index 84848123e2a8..5582e8cfac8f 100644
--- a/trunk/arch/xtensa/boot/boot-redboot/bootstrap.S
+++ b/trunk/arch/xtensa/boot/boot-redboot/bootstrap.S
@@ -1,4 +1,4 @@
-#include <asm/variant/core.h>
+#include <variant/core.h>
 #include <asm/regs.h>
 #include <asm/asmmacro.h>
 #include <asm/cacheasm.h>
diff --git a/trunk/include/asm-xtensa/Kbuild b/trunk/arch/xtensa/include/asm/Kbuild
similarity index 100%
rename from trunk/include/asm-xtensa/Kbuild
rename to trunk/arch/xtensa/include/asm/Kbuild
diff --git a/trunk/include/asm-xtensa/asmmacro.h b/trunk/arch/xtensa/include/asm/asmmacro.h
similarity index 98%
rename from trunk/include/asm-xtensa/asmmacro.h
rename to trunk/arch/xtensa/include/asm/asmmacro.h
index 76915cabad17..755320f6e0bc 100644
--- a/trunk/include/asm-xtensa/asmmacro.h
+++ b/trunk/arch/xtensa/include/asm/asmmacro.h
@@ -11,7 +11,7 @@
 #ifndef _XTENSA_ASMMACRO_H
 #define _XTENSA_ASMMACRO_H
 
-#include <asm/variant/core.h>
+#include <variant/core.h>
 
 /*
  * Some little helpers for loops. Use zero-overhead-loops
diff --git a/trunk/include/asm-xtensa/atomic.h b/trunk/arch/xtensa/include/asm/atomic.h
similarity index 100%
rename from trunk/include/asm-xtensa/atomic.h
rename to trunk/arch/xtensa/include/asm/atomic.h
diff --git a/trunk/include/asm-xtensa/auxvec.h b/trunk/arch/xtensa/include/asm/auxvec.h
similarity index 100%
rename from trunk/include/asm-xtensa/auxvec.h
rename to trunk/arch/xtensa/include/asm/auxvec.h
diff --git a/trunk/include/asm-xtensa/bitops.h b/trunk/arch/xtensa/include/asm/bitops.h
similarity index 100%
rename from trunk/include/asm-xtensa/bitops.h
rename to trunk/arch/xtensa/include/asm/bitops.h
diff --git a/trunk/include/asm-xtensa/bootparam.h b/trunk/arch/xtensa/include/asm/bootparam.h
similarity index 100%
rename from trunk/include/asm-xtensa/bootparam.h
rename to trunk/arch/xtensa/include/asm/bootparam.h
diff --git a/trunk/include/asm-xtensa/bug.h b/trunk/arch/xtensa/include/asm/bug.h
similarity index 100%
rename from trunk/include/asm-xtensa/bug.h
rename to trunk/arch/xtensa/include/asm/bug.h
diff --git a/trunk/include/asm-xtensa/bugs.h b/trunk/arch/xtensa/include/asm/bugs.h
similarity index 100%
rename from trunk/include/asm-xtensa/bugs.h
rename to trunk/arch/xtensa/include/asm/bugs.h
diff --git a/trunk/include/asm-xtensa/byteorder.h b/trunk/arch/xtensa/include/asm/byteorder.h
similarity index 82%
rename from trunk/include/asm-xtensa/byteorder.h
rename to trunk/arch/xtensa/include/asm/byteorder.h
index 765edf17a9a4..07d10ad364d1 100644
--- a/trunk/include/asm-xtensa/byteorder.h
+++ b/trunk/arch/xtensa/include/asm/byteorder.h
@@ -14,7 +14,17 @@
 #include <asm/types.h>
 #include <linux/compiler.h>
 
-static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+#ifdef __XTENSA_EL__
+# define __LITTLE_ENDIAN
+#elif defined(__XTENSA_EB__)
+# define __BIG_ENDIAN
+#else
+# error processor byte order undefined!
+#endif
+
+#define __SWAB_64_THRU_32__
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {
     __u32 res;
     /* instruction sequence from Xtensa ISA release 2/2000 */
@@ -28,8 +38,9 @@ static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
 	    );
     return res;
 }
+#define __arch_swab32 __arch_swab32
 
-static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
 {
     /* Given that 'short' values are signed (i.e., can be negative),
      * we cannot assume that the upper 16-bits of the register are
@@ -62,21 +73,8 @@ static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
 
     return res;
 }
+#define __arch_swab16 __arch_swab16
 
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-
-#ifdef __XTENSA_EL__
-# include <linux/byteorder/little_endian.h>
-#elif defined(__XTENSA_EB__)
-# include <linux/byteorder/big_endian.h>
-#else
-# error processor byte order undefined!
-#endif
+#include <linux/byteorder.h>
 
 #endif /* _XTENSA_BYTEORDER_H */
diff --git a/trunk/include/asm-xtensa/cache.h b/trunk/arch/xtensa/include/asm/cache.h
similarity index 96%
rename from trunk/include/asm-xtensa/cache.h
rename to trunk/arch/xtensa/include/asm/cache.h
index 3bba2a540cf0..f04c9891142f 100644
--- a/trunk/include/asm-xtensa/cache.h
+++ b/trunk/arch/xtensa/include/asm/cache.h
@@ -11,7 +11,7 @@
 #ifndef _XTENSA_CACHE_H
 #define _XTENSA_CACHE_H
 
-#include <asm/variant/core.h>
+#include <variant/core.h>
 
 #define L1_CACHE_SHIFT	XCHAL_DCACHE_LINEWIDTH
 #define L1_CACHE_BYTES	XCHAL_DCACHE_LINESIZE
diff --git a/trunk/include/asm-xtensa/cacheasm.h b/trunk/arch/xtensa/include/asm/cacheasm.h
similarity index 100%
rename from trunk/include/asm-xtensa/cacheasm.h
rename to trunk/arch/xtensa/include/asm/cacheasm.h
diff --git a/trunk/include/asm-xtensa/cacheflush.h b/trunk/arch/xtensa/include/asm/cacheflush.h
similarity index 100%
rename from trunk/include/asm-xtensa/cacheflush.h
rename to trunk/arch/xtensa/include/asm/cacheflush.h
diff --git a/trunk/include/asm-xtensa/checksum.h b/trunk/arch/xtensa/include/asm/checksum.h
similarity index 99%
rename from trunk/include/asm-xtensa/checksum.h
rename to trunk/arch/xtensa/include/asm/checksum.h
index 23534c60b3a4..f84d3f00774a 100644
--- a/trunk/include/asm-xtensa/checksum.h
+++ b/trunk/arch/xtensa/include/asm/checksum.h
@@ -12,7 +12,7 @@
 #define _XTENSA_CHECKSUM_H
 
 #include <linux/in6.h>
-#include <asm/variant/core.h>
+#include <variant/core.h>
 
 /*
  * computes the checksum of a memory block at buff, length len,
diff --git a/trunk/include/asm-xtensa/coprocessor.h b/trunk/arch/xtensa/include/asm/coprocessor.h
similarity index 98%
rename from trunk/include/asm-xtensa/coprocessor.h
rename to trunk/arch/xtensa/include/asm/coprocessor.h
index 1cbcf9001a41..65a285d8d3fb 100644
--- a/trunk/include/asm-xtensa/coprocessor.h
+++ b/trunk/arch/xtensa/include/asm/coprocessor.h
@@ -13,11 +13,11 @@
 #define _XTENSA_COPROCESSOR_H
 
 #include <linux/stringify.h>
-#include <asm/variant/tie.h>
+#include <variant/tie.h>
 #include <asm/types.h>
 
 #ifdef __ASSEMBLY__
-# include <asm/variant/tie-asm.h>
+# include <variant/tie-asm.h>
 
 .macro	xchal_sa_start  a b
 	.set .Lxchal_pofs_, 0
diff --git a/trunk/include/asm-xtensa/cpumask.h b/trunk/arch/xtensa/include/asm/cpumask.h
similarity index 100%
rename from trunk/include/asm-xtensa/cpumask.h
rename to trunk/arch/xtensa/include/asm/cpumask.h
diff --git a/trunk/include/asm-xtensa/cputime.h b/trunk/arch/xtensa/include/asm/cputime.h
similarity index 100%
rename from trunk/include/asm-xtensa/cputime.h
rename to trunk/arch/xtensa/include/asm/cputime.h
diff --git a/trunk/include/asm-xtensa/current.h b/trunk/arch/xtensa/include/asm/current.h
similarity index 100%
rename from trunk/include/asm-xtensa/current.h
rename to trunk/arch/xtensa/include/asm/current.h
diff --git a/trunk/include/asm-xtensa/delay.h b/trunk/arch/xtensa/include/asm/delay.h
similarity index 100%
rename from trunk/include/asm-xtensa/delay.h
rename to trunk/arch/xtensa/include/asm/delay.h
diff --git a/trunk/include/asm-xtensa/device.h b/trunk/arch/xtensa/include/asm/device.h
similarity index 100%
rename from trunk/include/asm-xtensa/device.h
rename to trunk/arch/xtensa/include/asm/device.h
diff --git a/trunk/include/asm-xtensa/div64.h b/trunk/arch/xtensa/include/asm/div64.h
similarity index 100%
rename from trunk/include/asm-xtensa/div64.h
rename to trunk/arch/xtensa/include/asm/div64.h
diff --git a/trunk/include/asm-xtensa/dma-mapping.h b/trunk/arch/xtensa/include/asm/dma-mapping.h
similarity index 100%
rename from trunk/include/asm-xtensa/dma-mapping.h
rename to trunk/arch/xtensa/include/asm/dma-mapping.h
diff --git a/trunk/include/asm-xtensa/dma.h b/trunk/arch/xtensa/include/asm/dma.h
similarity index 100%
rename from trunk/include/asm-xtensa/dma.h
rename to trunk/arch/xtensa/include/asm/dma.h
diff --git a/trunk/include/asm-xtensa/elf.h b/trunk/arch/xtensa/include/asm/elf.h
similarity index 100%
rename from trunk/include/asm-xtensa/elf.h
rename to trunk/arch/xtensa/include/asm/elf.h
diff --git a/trunk/include/asm-xtensa/emergency-restart.h b/trunk/arch/xtensa/include/asm/emergency-restart.h
similarity index 100%
rename from trunk/include/asm-xtensa/emergency-restart.h
rename to trunk/arch/xtensa/include/asm/emergency-restart.h
diff --git a/trunk/include/asm-xtensa/errno.h b/trunk/arch/xtensa/include/asm/errno.h
similarity index 100%
rename from trunk/include/asm-xtensa/errno.h
rename to trunk/arch/xtensa/include/asm/errno.h
diff --git a/trunk/include/asm-xtensa/fb.h b/trunk/arch/xtensa/include/asm/fb.h
similarity index 100%
rename from trunk/include/asm-xtensa/fb.h
rename to trunk/arch/xtensa/include/asm/fb.h
diff --git a/trunk/include/asm-xtensa/fcntl.h b/trunk/arch/xtensa/include/asm/fcntl.h
similarity index 100%
rename from trunk/include/asm-xtensa/fcntl.h
rename to trunk/arch/xtensa/include/asm/fcntl.h
diff --git a/trunk/include/asm-xtensa/futex.h b/trunk/arch/xtensa/include/asm/futex.h
similarity index 100%
rename from trunk/include/asm-xtensa/futex.h
rename to trunk/arch/xtensa/include/asm/futex.h
diff --git a/trunk/include/asm-xtensa/hardirq.h b/trunk/arch/xtensa/include/asm/hardirq.h
similarity index 100%
rename from trunk/include/asm-xtensa/hardirq.h
rename to trunk/arch/xtensa/include/asm/hardirq.h
diff --git a/trunk/include/asm-xtensa/highmem.h b/trunk/arch/xtensa/include/asm/highmem.h
similarity index 100%
rename from trunk/include/asm-xtensa/highmem.h
rename to trunk/arch/xtensa/include/asm/highmem.h
diff --git a/trunk/include/asm-xtensa/hw_irq.h b/trunk/arch/xtensa/include/asm/hw_irq.h
similarity index 100%
rename from trunk/include/asm-xtensa/hw_irq.h
rename to trunk/arch/xtensa/include/asm/hw_irq.h
diff --git a/trunk/include/asm-xtensa/io.h b/trunk/arch/xtensa/include/asm/io.h
similarity index 100%
rename from trunk/include/asm-xtensa/io.h
rename to trunk/arch/xtensa/include/asm/io.h
diff --git a/trunk/include/asm-xtensa/ioctl.h b/trunk/arch/xtensa/include/asm/ioctl.h
similarity index 100%
rename from trunk/include/asm-xtensa/ioctl.h
rename to trunk/arch/xtensa/include/asm/ioctl.h
diff --git a/trunk/include/asm-xtensa/ioctls.h b/trunk/arch/xtensa/include/asm/ioctls.h
similarity index 100%
rename from trunk/include/asm-xtensa/ioctls.h
rename to trunk/arch/xtensa/include/asm/ioctls.h
diff --git a/trunk/include/asm-xtensa/ipcbuf.h b/trunk/arch/xtensa/include/asm/ipcbuf.h
similarity index 100%
rename from trunk/include/asm-xtensa/ipcbuf.h
rename to trunk/arch/xtensa/include/asm/ipcbuf.h
diff --git a/trunk/include/asm-xtensa/irq.h b/trunk/arch/xtensa/include/asm/irq.h
similarity index 89%
rename from trunk/include/asm-xtensa/irq.h
rename to trunk/arch/xtensa/include/asm/irq.h
index fc73b7f11aff..1620d1e0e695 100644
--- a/trunk/include/asm-xtensa/irq.h
+++ b/trunk/arch/xtensa/include/asm/irq.h
@@ -11,8 +11,8 @@
 #ifndef _XTENSA_IRQ_H
 #define _XTENSA_IRQ_H
 
-#include <asm/platform/hardware.h>
-#include <asm/variant/core.h>
+#include <platform/hardware.h>
+#include <variant/core.h>
 
 #ifndef PLATFORM_NR_IRQS
 # define PLATFORM_NR_IRQS 0
diff --git a/trunk/include/asm-xtensa/irq_regs.h b/trunk/arch/xtensa/include/asm/irq_regs.h
similarity index 100%
rename from trunk/include/asm-xtensa/irq_regs.h
rename to trunk/arch/xtensa/include/asm/irq_regs.h
diff --git a/trunk/include/asm-xtensa/kdebug.h b/trunk/arch/xtensa/include/asm/kdebug.h
similarity index 100%
rename from trunk/include/asm-xtensa/kdebug.h
rename to trunk/arch/xtensa/include/asm/kdebug.h
diff --git a/trunk/include/asm-xtensa/kmap_types.h b/trunk/arch/xtensa/include/asm/kmap_types.h
similarity index 100%
rename from trunk/include/asm-xtensa/kmap_types.h
rename to trunk/arch/xtensa/include/asm/kmap_types.h
diff --git a/trunk/include/asm-xtensa/linkage.h b/trunk/arch/xtensa/include/asm/linkage.h
similarity index 100%
rename from trunk/include/asm-xtensa/linkage.h
rename to trunk/arch/xtensa/include/asm/linkage.h
diff --git a/trunk/include/asm-xtensa/local.h b/trunk/arch/xtensa/include/asm/local.h
similarity index 100%
rename from trunk/include/asm-xtensa/local.h
rename to trunk/arch/xtensa/include/asm/local.h
diff --git a/trunk/include/asm-xtensa/mman.h b/trunk/arch/xtensa/include/asm/mman.h
similarity index 100%
rename from trunk/include/asm-xtensa/mman.h
rename to trunk/arch/xtensa/include/asm/mman.h
diff --git a/trunk/include/asm-xtensa/mmu.h b/trunk/arch/xtensa/include/asm/mmu.h
similarity index 100%
rename from trunk/include/asm-xtensa/mmu.h
rename to trunk/arch/xtensa/include/asm/mmu.h
diff --git a/trunk/include/asm-xtensa/mmu_context.h b/trunk/arch/xtensa/include/asm/mmu_context.h
similarity index 100%
rename from trunk/include/asm-xtensa/mmu_context.h
rename to trunk/arch/xtensa/include/asm/mmu_context.h
diff --git a/trunk/include/asm-xtensa/module.h b/trunk/arch/xtensa/include/asm/module.h
similarity index 100%
rename from trunk/include/asm-xtensa/module.h
rename to trunk/arch/xtensa/include/asm/module.h
diff --git a/trunk/include/asm-xtensa/msgbuf.h b/trunk/arch/xtensa/include/asm/msgbuf.h
similarity index 100%
rename from trunk/include/asm-xtensa/msgbuf.h
rename to trunk/arch/xtensa/include/asm/msgbuf.h
diff --git a/trunk/include/asm-xtensa/mutex.h b/trunk/arch/xtensa/include/asm/mutex.h
similarity index 100%
rename from trunk/include/asm-xtensa/mutex.h
rename to trunk/arch/xtensa/include/asm/mutex.h
diff --git a/trunk/include/asm-xtensa/page.h b/trunk/arch/xtensa/include/asm/page.h
similarity index 100%
rename from trunk/include/asm-xtensa/page.h
rename to trunk/arch/xtensa/include/asm/page.h
diff --git a/trunk/include/asm-xtensa/param.h b/trunk/arch/xtensa/include/asm/param.h
similarity index 100%
rename from trunk/include/asm-xtensa/param.h
rename to trunk/arch/xtensa/include/asm/param.h
diff --git a/trunk/include/asm-xtensa/pci-bridge.h b/trunk/arch/xtensa/include/asm/pci-bridge.h
similarity index 100%
rename from trunk/include/asm-xtensa/pci-bridge.h
rename to trunk/arch/xtensa/include/asm/pci-bridge.h
diff --git a/trunk/include/asm-xtensa/pci.h b/trunk/arch/xtensa/include/asm/pci.h
similarity index 100%
rename from trunk/include/asm-xtensa/pci.h
rename to trunk/arch/xtensa/include/asm/pci.h
diff --git a/trunk/include/asm-xtensa/percpu.h b/trunk/arch/xtensa/include/asm/percpu.h
similarity index 100%
rename from trunk/include/asm-xtensa/percpu.h
rename to trunk/arch/xtensa/include/asm/percpu.h
diff --git a/trunk/include/asm-xtensa/pgalloc.h b/trunk/arch/xtensa/include/asm/pgalloc.h
similarity index 100%
rename from trunk/include/asm-xtensa/pgalloc.h
rename to trunk/arch/xtensa/include/asm/pgalloc.h
diff --git a/trunk/include/asm-xtensa/pgtable.h b/trunk/arch/xtensa/include/asm/pgtable.h
similarity index 100%
rename from trunk/include/asm-xtensa/pgtable.h
rename to trunk/arch/xtensa/include/asm/pgtable.h
diff --git a/trunk/include/asm-xtensa/platform.h b/trunk/arch/xtensa/include/asm/platform.h
similarity index 98%
rename from trunk/include/asm-xtensa/platform.h
rename to trunk/arch/xtensa/include/asm/platform.h
index 48135a9718b0..e3d5a48ad495 100644
--- a/trunk/include/asm-xtensa/platform.h
+++ b/trunk/arch/xtensa/include/asm/platform.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-xtensa/platform.h
- *
  * Platform specific functions
  *
  * This file is subject to the terms and conditions of the GNU General
diff --git a/trunk/include/asm-xtensa/poll.h b/trunk/arch/xtensa/include/asm/poll.h
similarity index 100%
rename from trunk/include/asm-xtensa/poll.h
rename to trunk/arch/xtensa/include/asm/poll.h
diff --git a/trunk/include/asm-xtensa/posix_types.h b/trunk/arch/xtensa/include/asm/posix_types.h
similarity index 100%
rename from trunk/include/asm-xtensa/posix_types.h
rename to trunk/arch/xtensa/include/asm/posix_types.h
diff --git a/trunk/include/asm-xtensa/processor.h b/trunk/arch/xtensa/include/asm/processor.h
similarity index 99%
rename from trunk/include/asm-xtensa/processor.h
rename to trunk/arch/xtensa/include/asm/processor.h
index 4918a4e96d42..07387d3b99f4 100644
--- a/trunk/include/asm-xtensa/processor.h
+++ b/trunk/arch/xtensa/include/asm/processor.h
@@ -11,7 +11,7 @@
 #ifndef _XTENSA_PROCESSOR_H
 #define _XTENSA_PROCESSOR_H
 
-#include <asm/variant/core.h>
+#include <variant/core.h>
 #include <asm/coprocessor.h>
 
 #include <linux/compiler.h>
diff --git a/trunk/include/asm-xtensa/ptrace.h b/trunk/arch/xtensa/include/asm/ptrace.h
similarity index 99%
rename from trunk/include/asm-xtensa/ptrace.h
rename to trunk/arch/xtensa/include/asm/ptrace.h
index 089b0db44816..905e1e619654 100644
--- a/trunk/include/asm-xtensa/ptrace.h
+++ b/trunk/arch/xtensa/include/asm/ptrace.h
@@ -111,7 +111,7 @@ struct pt_regs {
 	unsigned long areg[16];		/* 128 (64) */
 };
 
-#include <asm/variant/core.h>
+#include <variant/core.h>
 
 # define task_pt_regs(tsk) ((struct pt_regs*) \
   (task_stack_page(tsk) + KERNEL_STACK_SIZE - (XCHAL_NUM_AREGS-16)*4) - 1)
diff --git a/trunk/include/asm-xtensa/regs.h b/trunk/arch/xtensa/include/asm/regs.h
similarity index 100%
rename from trunk/include/asm-xtensa/regs.h
rename to trunk/arch/xtensa/include/asm/regs.h
diff --git a/trunk/include/asm-xtensa/resource.h b/trunk/arch/xtensa/include/asm/resource.h
similarity index 100%
rename from trunk/include/asm-xtensa/resource.h
rename to trunk/arch/xtensa/include/asm/resource.h
diff --git a/trunk/include/asm-xtensa/rmap.h b/trunk/arch/xtensa/include/asm/rmap.h
similarity index 100%
rename from trunk/include/asm-xtensa/rmap.h
rename to trunk/arch/xtensa/include/asm/rmap.h
diff --git a/trunk/include/asm-xtensa/rwsem.h b/trunk/arch/xtensa/include/asm/rwsem.h
similarity index 100%
rename from trunk/include/asm-xtensa/rwsem.h
rename to trunk/arch/xtensa/include/asm/rwsem.h
diff --git a/trunk/include/asm-xtensa/scatterlist.h b/trunk/arch/xtensa/include/asm/scatterlist.h
similarity index 100%
rename from trunk/include/asm-xtensa/scatterlist.h
rename to trunk/arch/xtensa/include/asm/scatterlist.h
diff --git a/trunk/include/asm-xtensa/sections.h b/trunk/arch/xtensa/include/asm/sections.h
similarity index 100%
rename from trunk/include/asm-xtensa/sections.h
rename to trunk/arch/xtensa/include/asm/sections.h
diff --git a/trunk/include/asm-xtensa/segment.h b/trunk/arch/xtensa/include/asm/segment.h
similarity index 100%
rename from trunk/include/asm-xtensa/segment.h
rename to trunk/arch/xtensa/include/asm/segment.h
diff --git a/trunk/include/asm-xtensa/sembuf.h b/trunk/arch/xtensa/include/asm/sembuf.h
similarity index 100%
rename from trunk/include/asm-xtensa/sembuf.h
rename to trunk/arch/xtensa/include/asm/sembuf.h
diff --git a/trunk/include/asm-xtensa/serial.h b/trunk/arch/xtensa/include/asm/serial.h
similarity index 92%
rename from trunk/include/asm-xtensa/serial.h
rename to trunk/arch/xtensa/include/asm/serial.h
index ec04114fcf0b..a8a2493260f6 100644
--- a/trunk/include/asm-xtensa/serial.h
+++ b/trunk/arch/xtensa/include/asm/serial.h
@@ -13,6 +13,6 @@
 #ifndef _XTENSA_SERIAL_H
 #define _XTENSA_SERIAL_H
 
-#include <asm/platform/serial.h>
+#include <platform/serial.h>
 
 #endif	/* _XTENSA_SERIAL_H */
diff --git a/trunk/include/asm-xtensa/setup.h b/trunk/arch/xtensa/include/asm/setup.h
similarity index 100%
rename from trunk/include/asm-xtensa/setup.h
rename to trunk/arch/xtensa/include/asm/setup.h
diff --git a/trunk/include/asm-xtensa/shmbuf.h b/trunk/arch/xtensa/include/asm/shmbuf.h
similarity index 100%
rename from trunk/include/asm-xtensa/shmbuf.h
rename to trunk/arch/xtensa/include/asm/shmbuf.h
diff --git a/trunk/include/asm-xtensa/shmparam.h b/trunk/arch/xtensa/include/asm/shmparam.h
similarity index 100%
rename from trunk/include/asm-xtensa/shmparam.h
rename to trunk/arch/xtensa/include/asm/shmparam.h
diff --git a/trunk/include/asm-xtensa/sigcontext.h b/trunk/arch/xtensa/include/asm/sigcontext.h
similarity index 100%
rename from trunk/include/asm-xtensa/sigcontext.h
rename to trunk/arch/xtensa/include/asm/sigcontext.h
diff --git a/trunk/include/asm-xtensa/siginfo.h b/trunk/arch/xtensa/include/asm/siginfo.h
similarity index 100%
rename from trunk/include/asm-xtensa/siginfo.h
rename to trunk/arch/xtensa/include/asm/siginfo.h
diff --git a/trunk/include/asm-xtensa/signal.h b/trunk/arch/xtensa/include/asm/signal.h
similarity index 100%
rename from trunk/include/asm-xtensa/signal.h
rename to trunk/arch/xtensa/include/asm/signal.h
diff --git a/trunk/include/asm-xtensa/smp.h b/trunk/arch/xtensa/include/asm/smp.h
similarity index 100%
rename from trunk/include/asm-xtensa/smp.h
rename to trunk/arch/xtensa/include/asm/smp.h
diff --git a/trunk/include/asm-xtensa/socket.h b/trunk/arch/xtensa/include/asm/socket.h
similarity index 100%
rename from trunk/include/asm-xtensa/socket.h
rename to trunk/arch/xtensa/include/asm/socket.h
diff --git a/trunk/include/asm-xtensa/sockios.h b/trunk/arch/xtensa/include/asm/sockios.h
similarity index 100%
rename from trunk/include/asm-xtensa/sockios.h
rename to trunk/arch/xtensa/include/asm/sockios.h
diff --git a/trunk/include/asm-xtensa/spinlock.h b/trunk/arch/xtensa/include/asm/spinlock.h
similarity index 100%
rename from trunk/include/asm-xtensa/spinlock.h
rename to trunk/arch/xtensa/include/asm/spinlock.h
diff --git a/trunk/include/asm-xtensa/stat.h b/trunk/arch/xtensa/include/asm/stat.h
similarity index 100%
rename from trunk/include/asm-xtensa/stat.h
rename to trunk/arch/xtensa/include/asm/stat.h
diff --git a/trunk/include/asm-xtensa/statfs.h b/trunk/arch/xtensa/include/asm/statfs.h
similarity index 100%
rename from trunk/include/asm-xtensa/statfs.h
rename to trunk/arch/xtensa/include/asm/statfs.h
diff --git a/trunk/include/asm-xtensa/string.h b/trunk/arch/xtensa/include/asm/string.h
similarity index 100%
rename from trunk/include/asm-xtensa/string.h
rename to trunk/arch/xtensa/include/asm/string.h
diff --git a/trunk/include/asm-xtensa/syscall.h b/trunk/arch/xtensa/include/asm/syscall.h
similarity index 100%
rename from trunk/include/asm-xtensa/syscall.h
rename to trunk/arch/xtensa/include/asm/syscall.h
diff --git a/trunk/include/asm-xtensa/system.h b/trunk/arch/xtensa/include/asm/system.h
similarity index 100%
rename from trunk/include/asm-xtensa/system.h
rename to trunk/arch/xtensa/include/asm/system.h
diff --git a/trunk/include/asm-xtensa/termbits.h b/trunk/arch/xtensa/include/asm/termbits.h
similarity index 100%
rename from trunk/include/asm-xtensa/termbits.h
rename to trunk/arch/xtensa/include/asm/termbits.h
diff --git a/trunk/include/asm-xtensa/termios.h b/trunk/arch/xtensa/include/asm/termios.h
similarity index 100%
rename from trunk/include/asm-xtensa/termios.h
rename to trunk/arch/xtensa/include/asm/termios.h
diff --git a/trunk/include/asm-xtensa/thread_info.h b/trunk/arch/xtensa/include/asm/thread_info.h
similarity index 100%
rename from trunk/include/asm-xtensa/thread_info.h
rename to trunk/arch/xtensa/include/asm/thread_info.h
diff --git a/trunk/include/asm-xtensa/timex.h b/trunk/arch/xtensa/include/asm/timex.h
similarity index 100%
rename from trunk/include/asm-xtensa/timex.h
rename to trunk/arch/xtensa/include/asm/timex.h
diff --git a/trunk/include/asm-xtensa/tlb.h b/trunk/arch/xtensa/include/asm/tlb.h
similarity index 100%
rename from trunk/include/asm-xtensa/tlb.h
rename to trunk/arch/xtensa/include/asm/tlb.h
diff --git a/trunk/include/asm-xtensa/tlbflush.h b/trunk/arch/xtensa/include/asm/tlbflush.h
similarity index 100%
rename from trunk/include/asm-xtensa/tlbflush.h
rename to trunk/arch/xtensa/include/asm/tlbflush.h
diff --git a/trunk/include/asm-xtensa/topology.h b/trunk/arch/xtensa/include/asm/topology.h
similarity index 100%
rename from trunk/include/asm-xtensa/topology.h
rename to trunk/arch/xtensa/include/asm/topology.h
diff --git a/trunk/include/asm-xtensa/types.h b/trunk/arch/xtensa/include/asm/types.h
similarity index 100%
rename from trunk/include/asm-xtensa/types.h
rename to trunk/arch/xtensa/include/asm/types.h
diff --git a/trunk/include/asm-xtensa/uaccess.h b/trunk/arch/xtensa/include/asm/uaccess.h
similarity index 100%
rename from trunk/include/asm-xtensa/uaccess.h
rename to trunk/arch/xtensa/include/asm/uaccess.h
diff --git a/trunk/include/asm-xtensa/ucontext.h b/trunk/arch/xtensa/include/asm/ucontext.h
similarity index 100%
rename from trunk/include/asm-xtensa/ucontext.h
rename to trunk/arch/xtensa/include/asm/ucontext.h
diff --git a/trunk/include/asm-xtensa/unaligned.h b/trunk/arch/xtensa/include/asm/unaligned.h
similarity index 80%
rename from trunk/include/asm-xtensa/unaligned.h
rename to trunk/arch/xtensa/include/asm/unaligned.h
index 8f3424fc5d18..8e7ed046bfed 100644
--- a/trunk/include/asm-xtensa/unaligned.h
+++ b/trunk/arch/xtensa/include/asm/unaligned.h
@@ -10,20 +10,20 @@
 #ifndef _ASM_XTENSA_UNALIGNED_H
 #define _ASM_XTENSA_UNALIGNED_H
 
-#ifdef __XTENSA_EL__
-# include <linux/unaligned/le_memmove.h>
+#include <asm/byteorder.h>
+
+#ifdef __LITTLE_ENDIAN
+# include <linux/unaligned/le_struct.h>
 # include <linux/unaligned/be_byteshift.h>
 # include <linux/unaligned/generic.h>
 # define get_unaligned	__get_unaligned_le
 # define put_unaligned	__put_unaligned_le
-#elif defined(__XTENSA_EB__)
-# include <linux/unaligned/be_memmove.h>
+#else
+# include <linux/unaligned/be_struct.h>
 # include <linux/unaligned/le_byteshift.h>
 # include <linux/unaligned/generic.h>
 # define get_unaligned	__get_unaligned_be
 # define put_unaligned	__put_unaligned_be
-#else
-# error processor byte order undefined!
 #endif
 
 #endif	/* _ASM_XTENSA_UNALIGNED_H */
diff --git a/trunk/include/asm-xtensa/unistd.h b/trunk/arch/xtensa/include/asm/unistd.h
similarity index 100%
rename from trunk/include/asm-xtensa/unistd.h
rename to trunk/arch/xtensa/include/asm/unistd.h
diff --git a/trunk/include/asm-xtensa/user.h b/trunk/arch/xtensa/include/asm/user.h
similarity index 100%
rename from trunk/include/asm-xtensa/user.h
rename to trunk/arch/xtensa/include/asm/user.h
diff --git a/trunk/include/asm-xtensa/vga.h b/trunk/arch/xtensa/include/asm/vga.h
similarity index 100%
rename from trunk/include/asm-xtensa/vga.h
rename to trunk/arch/xtensa/include/asm/vga.h
diff --git a/trunk/include/asm-xtensa/xor.h b/trunk/arch/xtensa/include/asm/xor.h
similarity index 100%
rename from trunk/include/asm-xtensa/xor.h
rename to trunk/arch/xtensa/include/asm/xor.h
diff --git a/trunk/arch/xtensa/kernel/entry.S b/trunk/arch/xtensa/kernel/entry.S
index dfd35dcc1cb5..a51d36a27389 100644
--- a/trunk/arch/xtensa/kernel/entry.S
+++ b/trunk/arch/xtensa/kernel/entry.S
@@ -25,7 +25,7 @@
 #include <asm/page.h>
 #include <asm/signal.h>
 #include <asm/tlbflush.h>
-#include <asm/variant/tie-asm.h>
+#include <variant/tie-asm.h>
 
 /* Unimplemented features. */
 
diff --git a/trunk/arch/xtensa/kernel/vmlinux.lds.S b/trunk/arch/xtensa/kernel/vmlinux.lds.S
index 51f4fb6f16f9..d506774f4b05 100644
--- a/trunk/arch/xtensa/kernel/vmlinux.lds.S
+++ b/trunk/arch/xtensa/kernel/vmlinux.lds.S
@@ -16,7 +16,7 @@
 
 #include <asm-generic/vmlinux.lds.h>
 
-#include <asm/variant/core.h>
+#include <variant/core.h>
 OUTPUT_ARCH(xtensa)
 ENTRY(_start)
 
diff --git a/trunk/arch/xtensa/lib/checksum.S b/trunk/arch/xtensa/lib/checksum.S
index 9d9cd990afa6..df397f932d0e 100644
--- a/trunk/arch/xtensa/lib/checksum.S
+++ b/trunk/arch/xtensa/lib/checksum.S
@@ -16,7 +16,7 @@
 
 #include <asm/errno.h>
 #include <linux/linkage.h>
-#include <asm/variant/core.h>
+#include <variant/core.h>
 
 /*
  * computes a partial checksum, e.g. for TCP/UDP fragments
diff --git a/trunk/arch/xtensa/lib/memcopy.S b/trunk/arch/xtensa/lib/memcopy.S
index ddda8f4bc862..ea59dcd03866 100644
--- a/trunk/arch/xtensa/lib/memcopy.S
+++ b/trunk/arch/xtensa/lib/memcopy.S
@@ -9,7 +9,7 @@
  * Copyright (C) 2002 - 2005 Tensilica Inc.
  */
 
-#include <asm/variant/core.h>
+#include <variant/core.h>
 
 	.macro	src_b	r, w0, w1
 #ifdef __XTENSA_EB__
diff --git a/trunk/arch/xtensa/lib/memset.S b/trunk/arch/xtensa/lib/memset.S
index 56a17495b2db..10b8c400f175 100644
--- a/trunk/arch/xtensa/lib/memset.S
+++ b/trunk/arch/xtensa/lib/memset.S
@@ -11,7 +11,7 @@
  *  Copyright (C) 2002 Tensilica Inc.
  */
 
-#include <asm/variant/core.h>
+#include <variant/core.h>
 
 /*
  * void *memset(void *dst, int c, size_t length)
diff --git a/trunk/arch/xtensa/lib/strncpy_user.S b/trunk/arch/xtensa/lib/strncpy_user.S
index b2655d94558d..9f603cdaaa68 100644
--- a/trunk/arch/xtensa/lib/strncpy_user.S
+++ b/trunk/arch/xtensa/lib/strncpy_user.S
@@ -11,7 +11,7 @@
  *  Copyright (C) 2002 Tensilica Inc.
  */
 
-#include <asm/variant/core.h>
+#include <variant/core.h>
 #include <linux/errno.h>
 
 /* Load or store instructions that may cause exceptions use the EX macro. */
diff --git a/trunk/arch/xtensa/lib/strnlen_user.S b/trunk/arch/xtensa/lib/strnlen_user.S
index ad3f616322ca..23f2a89816a1 100644
--- a/trunk/arch/xtensa/lib/strnlen_user.S
+++ b/trunk/arch/xtensa/lib/strnlen_user.S
@@ -11,7 +11,7 @@
  *  Copyright (C) 2002 Tensilica Inc.
  */
 
-#include <asm/variant/core.h>
+#include <variant/core.h>
 
 /* Load or store instructions that may cause exceptions use the EX macro. */
 
diff --git a/trunk/arch/xtensa/lib/usercopy.S b/trunk/arch/xtensa/lib/usercopy.S
index a8ab1d4fe0ae..46d60314bb16 100644
--- a/trunk/arch/xtensa/lib/usercopy.S
+++ b/trunk/arch/xtensa/lib/usercopy.S
@@ -53,7 +53,7 @@
  *	a11/ original length
  */
 
-#include <asm/variant/core.h>
+#include <variant/core.h>
 
 #ifdef __XTENSA_EB__
 #define ALIGN(R, W0, W1) src	R, W0, W1
diff --git a/trunk/arch/xtensa/platforms/iss/console.c b/trunk/arch/xtensa/platforms/iss/console.c
index 9141e3690731..efed8897bef3 100644
--- a/trunk/arch/xtensa/platforms/iss/console.c
+++ b/trunk/arch/xtensa/platforms/iss/console.c
@@ -1,5 +1,5 @@
 /*
- * arch/xtensa/platform-iss/console.c
+ * arch/xtensa/platforms/iss/console.c
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -24,7 +24,7 @@
 #include <asm/uaccess.h>
 #include <asm/irq.h>
 
-#include <asm/platform/simcall.h>
+#include <platform/simcall.h>
 
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
diff --git a/trunk/include/asm-xtensa/platform-iss/hardware.h b/trunk/arch/xtensa/platforms/iss/include/platform/hardware.h
similarity index 100%
rename from trunk/include/asm-xtensa/platform-iss/hardware.h
rename to trunk/arch/xtensa/platforms/iss/include/platform/hardware.h
diff --git a/trunk/include/asm-xtensa/platform-iss/simcall.h b/trunk/arch/xtensa/platforms/iss/include/platform/simcall.h
similarity index 100%
rename from trunk/include/asm-xtensa/platform-iss/simcall.h
rename to trunk/arch/xtensa/platforms/iss/include/platform/simcall.h
diff --git a/trunk/arch/xtensa/platforms/iss/io.c b/trunk/arch/xtensa/platforms/iss/io.c
index 5b161a5cb65f..571d0b24f895 100644
--- a/trunk/arch/xtensa/platforms/iss/io.c
+++ b/trunk/arch/xtensa/platforms/iss/io.c
@@ -3,7 +3,7 @@
 #if 0
 
 #include <asm/io.h>
-#include <xtensa/simcall.h>
+#include <platform/platform-iss/simcall.h>
 
 extern int __simc ();
 
diff --git a/trunk/arch/xtensa/platforms/iss/network.c b/trunk/arch/xtensa/platforms/iss/network.c
index 64f057d89e73..edad4156d89a 100644
--- a/trunk/arch/xtensa/platforms/iss/network.c
+++ b/trunk/arch/xtensa/platforms/iss/network.c
@@ -1,6 +1,6 @@
 /*
  *
- * arch/xtensa/platform-iss/network.c
+ * arch/xtensa/platforms/iss/network.c
  *
  * Platform specific initialization.
  *
@@ -33,7 +33,7 @@
 #include <linux/rtnetlink.h>
 #include <linux/platform_device.h>
 
-#include <asm/platform/simcall.h>
+#include <platform/simcall.h>
 
 #define DRIVER_NAME "iss-netdev"
 #define ETH_MAX_PACKET 1500
diff --git a/trunk/arch/xtensa/platforms/xt2000/Makefile b/trunk/arch/xtensa/platforms/xt2000/Makefile
new file mode 100644
index 000000000000..54d018e45bfc
--- /dev/null
+++ b/trunk/arch/xtensa/platforms/xt2000/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Tensilica XT2000 Emulation Board
+#
+
+obj-y 			= setup.o
diff --git a/trunk/arch/xtensa/platforms/xt2000/include/platform/hardware.h b/trunk/arch/xtensa/platforms/xt2000/include/platform/hardware.h
new file mode 100644
index 000000000000..41459ad07766
--- /dev/null
+++ b/trunk/arch/xtensa/platforms/xt2000/include/platform/hardware.h
@@ -0,0 +1,55 @@
+/*
+ * platform/hardware.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 Tensilica Inc.
+ */
+
+/*
+ * This file contains the hardware configuration of the XT2000 board.
+ */
+
+#ifndef _XTENSA_XT2000_HARDWARE_H
+#define _XTENSA_XT2000_HARDWARE_H
+
+#include <variant/core.h>
+#include <asm/io.h>
+
+/* 
+ * Memory configuration.
+ */
+
+#define PLATFORM_DEFAULT_MEM_START 0x00000000
+#define PLATFORM_DEFAULT_MEM_SIZE 0x08000000
+
+/*
+ * Number of platform IRQs
+ */
+#define PLATFORM_NR_IRQS 3
+/*
+ * On-board components.
+ */
+
+#define SONIC83934_INTNUM	XCHAL_EXTINT3_NUM
+#define SONIC83934_ADDR		IOADDR(0x0d030000)
+
+/*
+ * V3-PCI
+ */
+
+/* The XT2000 uses the V3 as a cascaded interrupt controller for the PCI bus */
+
+#define IRQ_PCI_A		(XCHAL_NUM_INTERRUPTS + 0)
+#define IRQ_PCI_B		(XCHAL_NUM_INTERRUPTS + 1)
+#define IRQ_PCI_C		(XCHAL_NUM_INTERRUPTS + 2)
+
+/*
+ * Various other components.
+ */
+
+#define XT2000_LED_ADDR		IOADDR(0x0d040000)
+
+#endif /* _XTENSA_XT2000_HARDWARE_H */
diff --git a/trunk/arch/xtensa/platforms/xt2000/include/platform/serial.h b/trunk/arch/xtensa/platforms/xt2000/include/platform/serial.h
new file mode 100644
index 000000000000..7226cf732b47
--- /dev/null
+++ b/trunk/arch/xtensa/platforms/xt2000/include/platform/serial.h
@@ -0,0 +1,28 @@
+/*
+ * platform/serial.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_XT2000_SERIAL_H
+#define _XTENSA_XT2000_SERIAL_H
+
+#include <variant/core.h>
+#include <asm/io.h>
+
+/*  National-Semi PC16552D DUART:  */
+
+#define DUART16552_1_INTNUM	XCHAL_EXTINT4_NUM
+#define DUART16552_2_INTNUM	XCHAL_EXTINT5_NUM
+
+#define DUART16552_1_ADDR	IOADDR(0x0d050020)	/* channel 1 */
+#define DUART16552_2_ADDR	IOADDR(0x0d050000)	/* channel 2 */
+
+#define DUART16552_XTAL_FREQ	18432000	/* crystal frequency in Hz */
+#define BASE_BAUD ( DUART16552_XTAL_FREQ / 16 )
+
+#endif /* _XTENSA_XT2000_SERIAL_H */
diff --git a/trunk/arch/xtensa/platforms/xt2000/setup.c b/trunk/arch/xtensa/platforms/xt2000/setup.c
new file mode 100644
index 000000000000..9e83940ac265
--- /dev/null
+++ b/trunk/arch/xtensa/platforms/xt2000/setup.c
@@ -0,0 +1,181 @@
+/*
+ * arch/xtensa/platforms/xt2000/setup.c
+ *
+ * Platform specific functions for the XT2000 board.
+ *
+ * Authors:	Chris Zankel <chris@zankel.net>
+ *		Joe Taylor <joe@tensilica.com>
+ *
+ * Copyright 2001 - 2004 Tensilica Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/stringify.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+
+#include <asm/processor.h>
+#include <asm/platform.h>
+#include <asm/bootparam.h>
+#include <platform/hardware.h>
+#include <platform/serial.h>
+
+/* Assumes s points to an 8-chr string.  No checking for NULL. */
+
+static void led_print (int f, char *s)
+{
+	unsigned long* led_addr = (unsigned long*) (XT2000_LED_ADDR + 0xE0) + f;
+	int i;
+	for (i = f; i < 8; i++)
+		if ((*led_addr++ = *s++) == 0)
+		    break;
+}
+
+void platform_halt(void)
+{
+	led_print (0, "  HALT  ");
+	local_irq_disable();
+	while (1);
+}
+
+void platform_power_off(void)
+{
+	led_print (0, "POWEROFF");
+	local_irq_disable();
+	while (1);
+}
+
+void platform_restart(void)
+{
+	/* Flush and reset the mmu, simulate a processor reset, and
+	 * jump to the reset vector. */
+
+	__asm__ __volatile__ ("movi	a2, 15\n\t"
+			      "wsr	a2, " __stringify(ICOUNTLEVEL) "\n\t"
+			      "movi	a2, 0\n\t"
+			      "wsr	a2, " __stringify(ICOUNT) "\n\t"
+			      "wsr	a2, " __stringify(IBREAKENABLE) "\n\t"
+			      "wsr	a2, " __stringify(LCOUNT) "\n\t"
+			      "movi	a2, 0x1f\n\t"
+			      "wsr	a2, " __stringify(PS) "\n\t"
+			      "isync\n\t"
+			      "jx	%0\n\t"
+			      :
+			      : "a" (XCHAL_RESET_VECTOR_VADDR)
+			      : "a2"
+			      );
+
+	/* control never gets here */
+}
+
+void __init platform_setup(char** cmdline)
+{
+	led_print (0, "LINUX   ");
+}
+
+/* early initialization */
+
+extern sysmem_info_t __initdata sysmem;
+
+void platform_init(bp_tag_t* first)
+{
+	/* Set default memory block if not provided by the bootloader. */
+
+	if (sysmem.nr_banks == 0) {
+		sysmem.nr_banks = 1;
+		sysmem.bank[0].start = PLATFORM_DEFAULT_MEM_START;
+		sysmem.bank[0].end = PLATFORM_DEFAULT_MEM_START
+				     + PLATFORM_DEFAULT_MEM_SIZE;
+	}
+}
+
+/* Heartbeat. Let the LED blink. */
+
+void platform_heartbeat(void)
+{
+	static int i=0, t = 0;
+
+	if (--t < 0)
+	{
+		t = 59;
+		led_print(7, i ? ".": " ");
+		i ^= 1;
+	}
+}
+
+//#define RS_TABLE_SIZE 2
+//#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
+
+#define _SERIAL_PORT(_base,_irq)					\
+{									\
+	.mapbase	= (_base),					\
+	.membase	= (void*)(_base),				\
+	.irq		= (_irq),					\
+	.uartclk	= DUART16552_XTAL_FREQ,				\
+	.iotype		= UPIO_MEM,					\
+	.flags		= UPF_BOOT_AUTOCONF,				\
+	.regshift	= 2,						\
+}
+
+static struct plat_serial8250_port xt2000_serial_data[] = {
+#if XCHAL_HAVE_BE
+	_SERIAL_PORT(DUART16552_1_ADDR + 3, DUART16552_1_INTNUM),
+	_SERIAL_PORT(DUART16552_2_ADDR + 3, DUART16552_2_INTNUM),
+#else
+	_SERIAL_PORT(DUART16552_1_ADDR, DUART16552_1_INTNUM),
+	_SERIAL_PORT(DUART16552_2_ADDR, DUART16552_2_INTNUM),
+#endif
+	{ }
+};
+
+static struct platform_device xt2000_serial8250_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+	    .platform_data = xt2000_serial_data,
+	},
+};
+
+static struct resource xt2000_sonic_res[] = {
+	{
+		.start = SONIC83934_ADDR,
+		.end   = SONIC83934_ADDR + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = SONIC83934_INTNUM,
+		.end = SONIC83934_INTNUM,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device xt2000_sonic_device = {
+	.name		= "xtsonic",
+	.num_resources	= ARRAY_SIZE(xt2000_sonic_res),
+	.resource		= xt2000_sonic_res,
+};
+
+static int __init xt2000_setup_devinit(void)
+{
+	platform_device_register(&xt2000_serial8250_device);
+	platform_device_register(&xt2000_sonic_device);
+
+	return 0;
+}
+
+device_initcall(xt2000_setup_devinit);
diff --git a/trunk/include/asm-xtensa/variant-dc232b/core.h b/trunk/arch/xtensa/variants/dc232b/include/variant/core.h
similarity index 100%
rename from trunk/include/asm-xtensa/variant-dc232b/core.h
rename to trunk/arch/xtensa/variants/dc232b/include/variant/core.h
diff --git a/trunk/include/asm-xtensa/variant-dc232b/tie-asm.h b/trunk/arch/xtensa/variants/dc232b/include/variant/tie-asm.h
similarity index 100%
rename from trunk/include/asm-xtensa/variant-dc232b/tie-asm.h
rename to trunk/arch/xtensa/variants/dc232b/include/variant/tie-asm.h
diff --git a/trunk/include/asm-xtensa/variant-dc232b/tie.h b/trunk/arch/xtensa/variants/dc232b/include/variant/tie.h
similarity index 100%
rename from trunk/include/asm-xtensa/variant-dc232b/tie.h
rename to trunk/arch/xtensa/variants/dc232b/include/variant/tie.h
diff --git a/trunk/include/asm-xtensa/variant-fsf/core.h b/trunk/arch/xtensa/variants/fsf/include/variant/core.h
similarity index 100%
rename from trunk/include/asm-xtensa/variant-fsf/core.h
rename to trunk/arch/xtensa/variants/fsf/include/variant/core.h
diff --git a/trunk/include/asm-xtensa/variant-fsf/tie-asm.h b/trunk/arch/xtensa/variants/fsf/include/variant/tie-asm.h
similarity index 100%
rename from trunk/include/asm-xtensa/variant-fsf/tie-asm.h
rename to trunk/arch/xtensa/variants/fsf/include/variant/tie-asm.h
diff --git a/trunk/include/asm-xtensa/variant-fsf/tie.h b/trunk/arch/xtensa/variants/fsf/include/variant/tie.h
similarity index 100%
rename from trunk/include/asm-xtensa/variant-fsf/tie.h
rename to trunk/arch/xtensa/variants/fsf/include/variant/tie.h
diff --git a/trunk/drivers/acpi/acpi_memhotplug.c b/trunk/drivers/acpi/acpi_memhotplug.c
index 63a17b55b39b..7a0f4aa4fa1e 100644
--- a/trunk/drivers/acpi/acpi_memhotplug.c
+++ b/trunk/drivers/acpi/acpi_memhotplug.c
@@ -20,7 +20,7 @@
  *
  *
  * ACPI based HotPlug driver that supports Memory Hotplug
- * This driver fields notifications from firmare for memory add
+ * This driver fields notifications from firmware for memory add
  * and remove operations and alerts the VM of the affected memory
  * ranges.
  */
diff --git a/trunk/drivers/acpi/executer/exprep.c b/trunk/drivers/acpi/executer/exprep.c
index 5d438c32989d..a7dc87ecee37 100644
--- a/trunk/drivers/acpi/executer/exprep.c
+++ b/trunk/drivers/acpi/executer/exprep.c
@@ -404,7 +404,7 @@ acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc,
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Construct an union acpi_operand_object of type def_field and
+ * DESCRIPTION: Construct a union acpi_operand_object of type def_field and
  *              connect it to the parent Node.
  *
  ******************************************************************************/
diff --git a/trunk/drivers/acpi/executer/exresolv.c b/trunk/drivers/acpi/executer/exresolv.c
index 89571b92a522..60e8c47128e9 100644
--- a/trunk/drivers/acpi/executer/exresolv.c
+++ b/trunk/drivers/acpi/executer/exresolv.c
@@ -146,7 +146,7 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr,
 
 	stack_desc = *stack_ptr;
 
-	/* This is an union acpi_operand_object    */
+	/* This is a union acpi_operand_object    */
 
 	switch (ACPI_GET_OBJECT_TYPE(stack_desc)) {
 	case ACPI_TYPE_LOCAL_REFERENCE:
diff --git a/trunk/drivers/acpi/executer/exstore.c b/trunk/drivers/acpi/executer/exstore.c
index 3318df4cbd98..1c118ba78adb 100644
--- a/trunk/drivers/acpi/executer/exstore.c
+++ b/trunk/drivers/acpi/executer/exstore.c
@@ -274,7 +274,7 @@ acpi_ex_do_debug_object(union acpi_operand_object *source_desc,
  *
  * PARAMETERS:  *source_desc        - Value to be stored
  *              *dest_desc          - Where to store it.  Must be an NS node
- *                                    or an union acpi_operand_object of type
+ *                                    or a union acpi_operand_object of type
  *                                    Reference;
  *              walk_state          - Current walk state
  *
diff --git a/trunk/drivers/acpi/resources/rscreate.c b/trunk/drivers/acpi/resources/rscreate.c
index c0bbfa2c4193..08b8d73e6ee5 100644
--- a/trunk/drivers/acpi/resources/rscreate.c
+++ b/trunk/drivers/acpi/resources/rscreate.c
@@ -124,7 +124,7 @@ acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer,
  *
  * FUNCTION:    acpi_rs_create_pci_routing_table
  *
- * PARAMETERS:  package_object          - Pointer to an union acpi_operand_object
+ * PARAMETERS:  package_object          - Pointer to a union acpi_operand_object
  *                                        package
  *              output_buffer           - Pointer to the user's buffer
  *
diff --git a/trunk/drivers/acpi/utilities/utobject.c b/trunk/drivers/acpi/utilities/utobject.c
index c354e7a42bcd..4bef3cfbaccb 100644
--- a/trunk/drivers/acpi/utilities/utobject.c
+++ b/trunk/drivers/acpi/utilities/utobject.c
@@ -297,7 +297,7 @@ union acpi_operand_object *acpi_ut_create_string_object(acpi_size string_size)
  *
  * RETURN:      TRUE if object is valid, FALSE otherwise
  *
- * DESCRIPTION: Validate a pointer to be an union acpi_operand_object
+ * DESCRIPTION: Validate a pointer to be a union acpi_operand_object
  *
  ******************************************************************************/
 
@@ -389,7 +389,7 @@ void acpi_ut_delete_object_desc(union acpi_operand_object *object)
 {
 	ACPI_FUNCTION_TRACE_PTR(ut_delete_object_desc, object);
 
-	/* Object must be an union acpi_operand_object    */
+	/* Object must be a union acpi_operand_object    */
 
 	if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND) {
 		ACPI_ERROR((AE_INFO,
diff --git a/trunk/drivers/base/Kconfig b/trunk/drivers/base/Kconfig
index d8e8c49c0cbd..8f006f96ff53 100644
--- a/trunk/drivers/base/Kconfig
+++ b/trunk/drivers/base/Kconfig
@@ -54,7 +54,7 @@ config FIRMWARE_IN_KERNEL
 	  such firmware, and do not wish to use an initrd.
 
 	  This single option controls the inclusion of firmware for
-	  every driver which uses request_firmare() and ships its
+	  every driver which uses request_firmware() and ships its
 	  firmware in the kernel source tree, to avoid a proliferation
 	  of 'Include firmware for xxx device' options.
 
diff --git a/trunk/drivers/char/epca.c b/trunk/drivers/char/epca.c
index 39ad820b2350..af7c13ca9493 100644
--- a/trunk/drivers/char/epca.c
+++ b/trunk/drivers/char/epca.c
@@ -769,7 +769,7 @@ static int pc_open(struct tty_struct *tty, struct file *filp)
 	/* Check status of board configured in system.  */
 
 	/*
-	 * I check to see if the epca_setup routine detected an user error. It
+	 * I check to see if the epca_setup routine detected a user error. It
 	 * might be better to put this in pc_init, but for the moment it goes
 	 * here.
 	 */
diff --git a/trunk/drivers/cpufreq/Kconfig b/trunk/drivers/cpufreq/Kconfig
index 5f076aef74fa..a8c8d9c19d74 100644
--- a/trunk/drivers/cpufreq/Kconfig
+++ b/trunk/drivers/cpufreq/Kconfig
@@ -83,7 +83,7 @@ config CPU_FREQ_DEFAULT_GOV_USERSPACE
 	select CPU_FREQ_GOV_USERSPACE
 	help
 	  Use the CPUFreq governor 'userspace' as default. This allows
-	  you to set the CPU frequency manually or when an userspace 
+	  you to set the CPU frequency manually or when a userspace 
 	  program shall be able to set the CPU dynamically without having
 	  to enable the userspace governor manually.
 
@@ -138,7 +138,7 @@ config CPU_FREQ_GOV_USERSPACE
 	tristate "'userspace' governor for userspace frequency scaling"
 	help
 	  Enable this cpufreq governor when you either want to set the
-	  CPU frequency manually or when an userspace program shall
+	  CPU frequency manually or when a userspace program shall
 	  be able to set the CPU dynamically, like on LART 
 	  <http://www.lartmaker.nl/>.
 
diff --git a/trunk/drivers/hid/usbhid/hiddev.c b/trunk/drivers/hid/usbhid/hiddev.c
index 6a98f9f572b0..d73eea382ab3 100644
--- a/trunk/drivers/hid/usbhid/hiddev.c
+++ b/trunk/drivers/hid/usbhid/hiddev.c
@@ -874,12 +874,14 @@ int hiddev_connect(struct hid_device *hid, unsigned int force)
 	INIT_LIST_HEAD(&hiddev->list);
 	spin_lock_init(&hiddev->list_lock);
 	mutex_init(&hiddev->existancelock);
+	hid->hiddev = hiddev;
 	hiddev->hid = hid;
 	hiddev->exist = 1;
 
 	retval = usb_register_dev(usbhid->intf, &hiddev_class);
 	if (retval) {
 		err_hid("Not able to get a minor for this device.");
+		hid->hiddev = NULL;
 		kfree(hiddev);
 		return -1;
 	} else {
diff --git a/trunk/drivers/hwmon/fschmd.c b/trunk/drivers/hwmon/fschmd.c
index 967170368933..8b2d756595d9 100644
--- a/trunk/drivers/hwmon/fschmd.c
+++ b/trunk/drivers/hwmon/fschmd.c
@@ -75,7 +75,7 @@ static const u8 FSCHMD_REG_VOLT[3] = { 0x45, 0x42, 0x48 };
 
 /* minimum pwm at which the fan is driven (pwm can by increased depending on
    the temp. Notice that for the scy some fans share there minimum speed.
-   Also notice that with the scy the sensor order is different then with the
+   Also notice that with the scy the sensor order is different than with the
    other chips, this order was in the 2.4 driver and kept for consistency. */
 static const u8 FSCHMD_REG_FAN_MIN[5][6] = {
 	{ 0x55, 0x65 },					/* pos */
diff --git a/trunk/drivers/infiniband/hw/mlx4/cq.c b/trunk/drivers/infiniband/hw/mlx4/cq.c
index a3c5af1d7ec0..de5263beab4a 100644
--- a/trunk/drivers/infiniband/hw/mlx4/cq.c
+++ b/trunk/drivers/infiniband/hw/mlx4/cq.c
@@ -367,7 +367,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
 		if (err)
 			goto out;
 	} else {
-		/* Can't be smaller then the number of outstanding CQEs */
+		/* Can't be smaller than the number of outstanding CQEs */
 		outst_cqe = mlx4_ib_get_outstanding_cqes(cq);
 		if (entries < outst_cqe + 1) {
 			err = 0;
diff --git a/trunk/drivers/input/keyboard/atkbd.c b/trunk/drivers/input/keyboard/atkbd.c
index f6e9f39a527b..c3c8b9bc40ae 100644
--- a/trunk/drivers/input/keyboard/atkbd.c
+++ b/trunk/drivers/input/keyboard/atkbd.c
@@ -65,7 +65,7 @@ MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and
 
 /*
  * Scancode to keycode tables. These are just the default setting, and
- * are loadable via an userland utility.
+ * are loadable via a userland utility.
  */
 
 static const unsigned short atkbd_set2_keycode[512] = {
diff --git a/trunk/drivers/input/touchscreen/da9034-ts.c b/trunk/drivers/input/touchscreen/da9034-ts.c
index 4342e77814b5..fa67d782c3c3 100644
--- a/trunk/drivers/input/touchscreen/da9034-ts.c
+++ b/trunk/drivers/input/touchscreen/da9034-ts.c
@@ -16,6 +16,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/workqueue.h>
 #include <linux/mfd/da903x.h>
 
 #define DA9034_MANUAL_CTRL	0x50
diff --git a/trunk/drivers/macintosh/Kconfig b/trunk/drivers/macintosh/Kconfig
index b52659620d50..173cf55c64d0 100644
--- a/trunk/drivers/macintosh/Kconfig
+++ b/trunk/drivers/macintosh/Kconfig
@@ -138,7 +138,7 @@ config PMAC_BACKLIGHT
 	  Say Y here to enable Macintosh specific extensions of the generic
 	  backlight code. With this enabled, the brightness keys on older
 	  PowerBooks will be enabled so you can change the screen brightness.
-	  Newer models should use an userspace daemon like pbbuttonsd.
+	  Newer models should use a userspace daemon like pbbuttonsd.
 
 config PMAC_BACKLIGHT_LEGACY
 	bool "Provide legacy ioctl's on /dev/pmu for the backlight"
diff --git a/trunk/drivers/message/i2o/i2o_scsi.c b/trunk/drivers/message/i2o/i2o_scsi.c
index 1bcdbbb9e7d3..3d45817e6dcd 100644
--- a/trunk/drivers/message/i2o/i2o_scsi.c
+++ b/trunk/drivers/message/i2o/i2o_scsi.c
@@ -390,7 +390,7 @@ static int i2o_scsi_reply(struct i2o_controller *c, u32 m,
  *	@i2o_dev: the I2O device which was added
  *
  *	If a I2O device is added we catch the notification, because I2O classes
- *	other then SCSI peripheral will not be received through
+ *	other than SCSI peripheral will not be received through
  *	i2o_scsi_probe().
  */
 static void i2o_scsi_notify_device_add(struct i2o_device *i2o_dev)
diff --git a/trunk/drivers/misc/ibmasm/event.c b/trunk/drivers/misc/ibmasm/event.c
index fda6a4d3bf23..68a0a5b94795 100644
--- a/trunk/drivers/misc/ibmasm/event.c
+++ b/trunk/drivers/misc/ibmasm/event.c
@@ -50,7 +50,7 @@ static void wake_up_event_readers(struct service_processor *sp)
  * Store the event in the circular event buffer, wake up any sleeping
  * event readers.
  * There is no reader marker in the buffer, therefore readers are
- * responsible for keeping up with the writer, or they will loose events.
+ * responsible for keeping up with the writer, or they will lose events.
  */
 void ibmasm_receive_event(struct service_processor *sp, void *data, unsigned int data_size)
 {
diff --git a/trunk/drivers/misc/phantom.c b/trunk/drivers/misc/phantom.c
index abdebe347383..fa57b67593ae 100644
--- a/trunk/drivers/misc/phantom.c
+++ b/trunk/drivers/misc/phantom.c
@@ -6,7 +6,7 @@
  *  the Free Software Foundation; either version 2 of the License, or
  *  (at your option) any later version.
  *
- *  You need an userspace library to cooperate with this driver. It (and other
+ *  You need a userspace library to cooperate with this driver. It (and other
  *  info) may be obtained here:
  *  http://www.fi.muni.cz/~xslaby/phantom.html
  *  or alternatively, you might use OpenHaptics provided by Sensable.
diff --git a/trunk/drivers/mmc/host/atmel-mci.c b/trunk/drivers/mmc/host/atmel-mci.c
index 7a3f2436b011..1e97916914ad 100644
--- a/trunk/drivers/mmc/host/atmel-mci.c
+++ b/trunk/drivers/mmc/host/atmel-mci.c
@@ -25,8 +25,8 @@
 #include <linux/stat.h>
 
 #include <linux/mmc/host.h>
+#include <linux/atmel-mci.h>
 
-#include <asm/atmel-mci.h>
 #include <asm/io.h>
 #include <asm/unaligned.h>
 
diff --git a/trunk/drivers/mtd/devices/pmc551.c b/trunk/drivers/mtd/devices/pmc551.c
index d38bca64bb15..d2fd550f7e09 100644
--- a/trunk/drivers/mtd/devices/pmc551.c
+++ b/trunk/drivers/mtd/devices/pmc551.c
@@ -34,7 +34,7 @@
  *	aperture size, not the dram size, and the V370PDC supplies no
  *	other method for memory size discovery.  This problem is
  *	mostly only relevant when compiled as a module, as the
- *	unloading of the module with an aperture size smaller then
+ *	unloading of the module with an aperture size smaller than
  *	the ram will cause the driver to detect the onboard memory
  *	size to be equal to the aperture size when the module is
  *	reloaded.  Soooo, to help, the module supports an msize
diff --git a/trunk/drivers/mtd/ubi/eba.c b/trunk/drivers/mtd/ubi/eba.c
index 048a606cebde..25def348e5ba 100644
--- a/trunk/drivers/mtd/ubi/eba.c
+++ b/trunk/drivers/mtd/ubi/eba.c
@@ -717,7 +717,7 @@ int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
  * to the real data size, although the @buf buffer has to contain the
  * alignment. In all other cases, @len has to be aligned.
  *
- * It is prohibited to write more then once to logical eraseblocks of static
+ * It is prohibited to write more than once to logical eraseblocks of static
  * volumes. This function returns zero in case of success and a negative error
  * code in case of failure.
  */
diff --git a/trunk/drivers/mtd/ubi/io.c b/trunk/drivers/mtd/ubi/io.c
index a74118c05745..fe81039f2a7c 100644
--- a/trunk/drivers/mtd/ubi/io.c
+++ b/trunk/drivers/mtd/ubi/io.c
@@ -465,7 +465,7 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
  * This function synchronously erases physical eraseblock @pnum. If @torture
  * flag is not zero, the physical eraseblock is checked by means of writing
  * different patterns to it and reading them back. If the torturing is enabled,
- * the physical eraseblock is erased more then once.
+ * the physical eraseblock is erased more than once.
  *
  * This function returns the number of erasures made in case of success, %-EIO
  * if the erasure failed or the torturing test failed, and other negative error
diff --git a/trunk/drivers/mtd/ubi/scan.c b/trunk/drivers/mtd/ubi/scan.c
index 41d47e1cf15c..ecde202a5a12 100644
--- a/trunk/drivers/mtd/ubi/scan.c
+++ b/trunk/drivers/mtd/ubi/scan.c
@@ -478,7 +478,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 			return 0;
 		} else {
 			/*
-			 * This logical eraseblock is older then the one found
+			 * This logical eraseblock is older than the one found
 			 * previously.
 			 */
 			if (cmp_res & 4)
diff --git a/trunk/drivers/mtd/ubi/ubi-media.h b/trunk/drivers/mtd/ubi/ubi-media.h
index 2ad940409053..8419fdccc79c 100644
--- a/trunk/drivers/mtd/ubi/ubi-media.h
+++ b/trunk/drivers/mtd/ubi/ubi-media.h
@@ -135,7 +135,7 @@ enum {
  * The erase counter header takes 64 bytes and has a plenty of unused space for
  * future usage. The unused fields are zeroed. The @version field is used to
  * indicate the version of UBI implementation which is supposed to be able to
- * work with this UBI image. If @version is greater then the current UBI
+ * work with this UBI image. If @version is greater than the current UBI
  * version, the image is rejected. This may be useful in future if something
  * is changed radically. This field is duplicated in the volume identifier
  * header.
@@ -187,7 +187,7 @@ struct ubi_ec_hdr {
  * (sequence number) is used to distinguish between older and newer versions of
  * logical eraseblocks.
  *
- * There are 2 situations when there may be more then one physical eraseblock
+ * There are 2 situations when there may be more than one physical eraseblock
  * corresponding to the same logical eraseblock, i.e., having the same @vol_id
  * and @lnum values in the volume identifier header. Suppose we have a logical
  * eraseblock L and it is mapped to the physical eraseblock P.
diff --git a/trunk/drivers/mtd/ubi/vtbl.c b/trunk/drivers/mtd/ubi/vtbl.c
index 333c8941552f..1afc61e7455d 100644
--- a/trunk/drivers/mtd/ubi/vtbl.c
+++ b/trunk/drivers/mtd/ubi/vtbl.c
@@ -577,7 +577,7 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 		if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) {
 			/* Auto re-size flag may be set only for one volume */
 			if (ubi->autoresize_vol_id != -1) {
-				ubi_err("more then one auto-resize volume (%d "
+				ubi_err("more than one auto-resize volume (%d "
 					"and %d)", ubi->autoresize_vol_id, i);
 				kfree(vol);
 				return -EINVAL;
diff --git a/trunk/drivers/mtd/ubi/wl.c b/trunk/drivers/mtd/ubi/wl.c
index 14901cb82c18..891534f8210d 100644
--- a/trunk/drivers/mtd/ubi/wl.c
+++ b/trunk/drivers/mtd/ubi/wl.c
@@ -128,7 +128,7 @@
  * situation when the picked physical eraseblock is constantly erased after the
  * data is written to it. So, we have a constant which limits the highest erase
  * counter of the free physical eraseblock to pick. Namely, the WL sub-system
- * does not pick eraseblocks with erase counter greater then the lowest erase
+ * does not pick eraseblocks with erase counter greater than the lowest erase
  * counter plus %WL_FREE_MAX_DIFF.
  */
 #define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD)
@@ -917,7 +917,7 @@ static int ensure_wear_leveling(struct ubi_device *ubi)
 		/*
 		 * We schedule wear-leveling only if the difference between the
 		 * lowest erase counter of used physical eraseblocks and a high
-		 * erase counter of free physical eraseblocks is greater then
+		 * erase counter of free physical eraseblocks is greater than
 		 * %UBI_WL_THRESHOLD.
 		 */
 		e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, u.rb);
diff --git a/trunk/drivers/net/bnx2x_link.c b/trunk/drivers/net/bnx2x_link.c
index 67de94f1f30e..fefa6ab13064 100644
--- a/trunk/drivers/net/bnx2x_link.c
+++ b/trunk/drivers/net/bnx2x_link.c
@@ -3359,7 +3359,7 @@ static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len)
 	u8 shift = 8*4;
 	u8 digit;
 	if (len < 10) {
-		/* Need more then 10chars for this format */
+		/* Need more than 10chars for this format */
 		*str_ptr = '\0';
 		return -EINVAL;
 	}
diff --git a/trunk/drivers/net/e1000/e1000_hw.c b/trunk/drivers/net/e1000/e1000_hw.c
index d04eef53571e..e1a3fc1303ee 100644
--- a/trunk/drivers/net/e1000/e1000_hw.c
+++ b/trunk/drivers/net/e1000/e1000_hw.c
@@ -6758,7 +6758,7 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
  * returns: - E1000_ERR_XXX
  *            E1000_SUCCESS
  *
- * For phy's older then IGP, this function simply reads the polarity bit in the
+ * For phy's older than IGP, this function simply reads the polarity bit in the
  * Phy Status register.  For IGP phy's, this bit is valid only if link speed is
  * 10 Mbps.  If the link speed is 100 Mbps there is no polarity so this bit will
  * return 0.  If the link speed is 1000 Mbps the polarity status is in the
@@ -6834,7 +6834,7 @@ static s32 e1000_check_polarity(struct e1000_hw *hw,
  * returns: - E1000_ERR_XXX
  *            E1000_SUCCESS
  *
- * For phy's older then IGP, this function reads the Downshift bit in the Phy
+ * For phy's older than IGP, this function reads the Downshift bit in the Phy
  * Specific Status register.  For IGP phy's, it reads the Downgrade bit in the
  * Link Health register.  In IGP this bit is latched high, so the driver must
  * read it immediately after link is established.
diff --git a/trunk/drivers/net/slip.h b/trunk/drivers/net/slip.h
index 853e0f6ec710..9ea5c11287d2 100644
--- a/trunk/drivers/net/slip.h
+++ b/trunk/drivers/net/slip.h
@@ -75,7 +75,7 @@ struct slip {
   unsigned long         tx_errors;      /* Planned stuff                */
   unsigned long         rx_dropped;     /* No memory for skb            */
   unsigned long         tx_dropped;     /* When MTU change              */
-  unsigned long         rx_over_errors; /* Frame bigger then SLIP buf.  */
+  unsigned long         rx_over_errors; /* Frame bigger than SLIP buf.  */
 #ifdef SL_INCLUDE_CSLIP
   unsigned long		tx_compressed;
   unsigned long		rx_compressed;
diff --git a/trunk/drivers/net/tehuti.c b/trunk/drivers/net/tehuti.c
index a10a83a11d9f..a7a4dc4d6313 100644
--- a/trunk/drivers/net/tehuti.c
+++ b/trunk/drivers/net/tehuti.c
@@ -1004,7 +1004,7 @@ static inline void bdx_rxdb_free_elem(struct rxdb *db, int n)
  * skb for rx. It assumes that Rx is desabled in HW
  * funcs are grouped for better cache usage
  *
- * RxD fifo is smaller then RxF fifo by design. Upon high load, RxD will be
+ * RxD fifo is smaller than RxF fifo by design. Upon high load, RxD will be
  * filled and packets will be dropped by nic without getting into host or
  * cousing interrupt. Anyway, in that condition, host has no chance to proccess
  * all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles
@@ -1826,7 +1826,7 @@ static void bdx_tx_free(struct bdx_priv *priv)
  *
  * Pushes desc to TxD fifo and overlaps it if needed.
  * NOTE: this func does not check for available space. this is responsibility
- *    of the caller. Neither does it check that data size is smaller then
+ *    of the caller. Neither does it check that data size is smaller than
  *    fifo size.
  */
 static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size)
diff --git a/trunk/drivers/net/tokenring/smctr.c b/trunk/drivers/net/tokenring/smctr.c
index a011666342ff..50eb29ce3c87 100644
--- a/trunk/drivers/net/tokenring/smctr.c
+++ b/trunk/drivers/net/tokenring/smctr.c
@@ -3064,7 +3064,7 @@ static int smctr_load_node_addr(struct net_device *dev)
  * will consequently cause a timeout.
  *
  * NOTE 1: If the monitor_state is MS_BEACON_TEST_STATE, all transmit
- * queues other then the one used for the lobe_media_test should be
+ * queues other than the one used for the lobe_media_test should be
  * disabled.!?
  *
  * NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask
diff --git a/trunk/drivers/net/wireless/atmel.c b/trunk/drivers/net/wireless/atmel.c
index 350157fcd080..4223672c4432 100644
--- a/trunk/drivers/net/wireless/atmel.c
+++ b/trunk/drivers/net/wireless/atmel.c
@@ -3836,7 +3836,7 @@ static int reset_atmel_card(struct net_device *dev)
 	   This routine is also responsible for initialising some
 	   hardware-specific fields in the atmel_private structure,
 	   including a copy of the firmware's hostinfo stucture
-	   which is the route into the rest of the firmare datastructures. */
+	   which is the route into the rest of the firmware datastructures. */
 
 	struct atmel_private *priv = netdev_priv(dev);
 	u8 configuration;
diff --git a/trunk/drivers/net/wireless/ipw2x00/ipw2100.c b/trunk/drivers/net/wireless/ipw2x00/ipw2100.c
index 1667065b86a7..823c2bf5e31e 100644
--- a/trunk/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/trunk/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1332,7 +1332,7 @@ static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
 		       IPW_AUX_HOST_RESET_REG_STOP_MASTER);
 
 	/* Step 2. Wait for stop Master Assert
-	 *         (not more then 50us, otherwise ret error */
+	 *         (not more than 50us, otherwise ret error */
 	i = 5;
 	do {
 		udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
@@ -1830,7 +1830,7 @@ static void ipw2100_down(struct ipw2100_priv *priv)
 		cancel_delayed_work(&priv->rf_kill);
 	}
 
-	/* Kill the firmare hang check timer */
+	/* Kill the firmware hang check timer */
 	if (!priv->stop_hang_check) {
 		priv->stop_hang_check = 1;
 		cancel_delayed_work(&priv->hang_check);
diff --git a/trunk/drivers/net/wireless/rt2x00/rt2x00crypto.c b/trunk/drivers/net/wireless/rt2x00/rt2x00crypto.c
index 37ad0d2fb64c..aee9cba13eb3 100644
--- a/trunk/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/trunk/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -184,8 +184,8 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
 	 * Make room for new data, note that we increase both
 	 * headsize and tailsize when required. The tailsize is
 	 * only needed when ICV data needs to be inserted and
-	 * the padding is smaller then the ICV data.
-	 * When alignment requirements is greater then the
+	 * the padding is smaller than the ICV data.
+	 * When alignment requirements is greater than the
 	 * ICV data we must trim the skb to the correct size
 	 * because we need to remove the extra bytes.
 	 */
diff --git a/trunk/drivers/net/wireless/strip.c b/trunk/drivers/net/wireless/strip.c
index dd0de3a9ed4e..7015f2480550 100644
--- a/trunk/drivers/net/wireless/strip.c
+++ b/trunk/drivers/net/wireless/strip.c
@@ -236,7 +236,7 @@ struct strip {
 	unsigned long tx_errors;	/* Planned stuff                */
 	unsigned long rx_dropped;	/* No memory for skb            */
 	unsigned long tx_dropped;	/* When MTU change              */
-	unsigned long rx_over_errors;	/* Frame bigger then STRIP buf. */
+	unsigned long rx_over_errors;	/* Frame bigger than STRIP buf. */
 
 	unsigned long pps_timer;	/* Timer to determine pps       */
 	unsigned long rx_pps_count;	/* Counter to determine pps     */
diff --git a/trunk/drivers/rtc/rtc-ds1511.c b/trunk/drivers/rtc/rtc-ds1511.c
index 23a07fe15a2c..0b6b7730c716 100644
--- a/trunk/drivers/rtc/rtc-ds1511.c
+++ b/trunk/drivers/rtc/rtc-ds1511.c
@@ -630,7 +630,7 @@ ds1511_rtc_init(void)
  static void __exit
 ds1511_rtc_exit(void)
 {
-	return platform_driver_unregister(&ds1511_rtc_driver);
+	platform_driver_unregister(&ds1511_rtc_driver);
 }
 
 module_init(ds1511_rtc_init);
diff --git a/trunk/drivers/rtc/rtc-stk17ta8.c b/trunk/drivers/rtc/rtc-stk17ta8.c
index dc0b6224ad9b..7d1547b0070e 100644
--- a/trunk/drivers/rtc/rtc-stk17ta8.c
+++ b/trunk/drivers/rtc/rtc-stk17ta8.c
@@ -399,7 +399,7 @@ static __init int stk17ta8_init(void)
 
 static __exit void stk17ta8_exit(void)
 {
-	return platform_driver_unregister(&stk17ta8_rtc_driver);
+	platform_driver_unregister(&stk17ta8_rtc_driver);
 }
 
 module_init(stk17ta8_init);
diff --git a/trunk/drivers/s390/block/dasd_eer.c b/trunk/drivers/s390/block/dasd_eer.c
index 892e2878d61b..f8e05ce98621 100644
--- a/trunk/drivers/s390/block/dasd_eer.c
+++ b/trunk/drivers/s390/block/dasd_eer.c
@@ -535,8 +535,8 @@ static int dasd_eer_open(struct inode *inp, struct file *filp)
 	    eerb->buffer_page_count > INT_MAX / PAGE_SIZE) {
 		kfree(eerb);
 		MESSAGE(KERN_WARNING, "can't open device since module "
-			"parameter eer_pages is smaller then 1 or"
-			" bigger then %d", (int)(INT_MAX / PAGE_SIZE));
+			"parameter eer_pages is smaller than 1 or"
+			" bigger than %d", (int)(INT_MAX / PAGE_SIZE));
 		unlock_kernel();
 		return -EINVAL;
 	}
diff --git a/trunk/drivers/s390/char/vmlogrdr.c b/trunk/drivers/s390/char/vmlogrdr.c
index aabbeb909cc6..d8a2289fcb69 100644
--- a/trunk/drivers/s390/char/vmlogrdr.c
+++ b/trunk/drivers/s390/char/vmlogrdr.c
@@ -427,7 +427,7 @@ static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv)
 			buffer = priv->buffer + sizeof(int);
 		}
 		/*
-		 * If the record is bigger then our buffer, we receive only
+		 * If the record is bigger than our buffer, we receive only
 		 * a part of it. We can get the rest later.
 		 */
 		if (iucv_data_count > NET_BUFFER_SIZE)
@@ -437,7 +437,7 @@ static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv)
 					  0, buffer, iucv_data_count,
 					  &priv->residual_length);
 		spin_unlock_bh(&priv->priv_lock);
-		/* An rc of 5 indicates that the record was bigger then
+		/* An rc of 5 indicates that the record was bigger than
 		 * the buffer, which is OK for us. A 9 indicates that the
 		 * record was purged befor we could receive it.
 		 */
diff --git a/trunk/drivers/scsi/a100u2w.c b/trunk/drivers/scsi/a100u2w.c
index 3c298c7253ee..964769f66eac 100644
--- a/trunk/drivers/scsi/a100u2w.c
+++ b/trunk/drivers/scsi/a100u2w.c
@@ -633,7 +633,7 @@ static int orc_device_reset(struct orc_host * host, struct scsi_cmnd *cmd, unsig
 		return FAILED;
 	}
 
-	/* Reset device is handled by the firmare, we fill in an SCB and
+	/* Reset device is handled by the firmware, we fill in an SCB and
 	   fire it at the controller, it does the rest */
 	scb->opcode = ORC_BUSDEVRST;
 	scb->target = target;
diff --git a/trunk/drivers/scsi/lpfc/lpfc_hbadisc.c b/trunk/drivers/scsi/lpfc/lpfc_hbadisc.c
index 8c64494444bf..311ed6dea726 100644
--- a/trunk/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/trunk/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1964,10 +1964,10 @@ lpfc_set_disctmo(struct lpfc_vport *vport)
 	uint32_t tmo;
 
 	if (vport->port_state == LPFC_LOCAL_CFG_LINK) {
-		/* For FAN, timeout should be greater then edtov */
+		/* For FAN, timeout should be greater than edtov */
 		tmo = (((phba->fc_edtov + 999) / 1000) + 1);
 	} else {
-		/* Normal discovery timeout should be > then ELS/CT timeout
+		/* Normal discovery timeout should be > than ELS/CT timeout
 		 * FC spec states we need 3 * ratov for CT requests
 		 */
 		tmo = ((phba->fc_ratov * 3) + 3);
diff --git a/trunk/drivers/scsi/lpfc/lpfc_sli.c b/trunk/drivers/scsi/lpfc/lpfc_sli.c
index 01dfdc8696f8..a36a120561e2 100644
--- a/trunk/drivers/scsi/lpfc/lpfc_sli.c
+++ b/trunk/drivers/scsi/lpfc/lpfc_sli.c
@@ -420,7 +420,7 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 		if (unlikely(pring->local_getidx >= max_cmd_idx)) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 					"0315 Ring %d issue: portCmdGet %d "
-					"is bigger then cmd ring %d\n",
+					"is bigger than cmd ring %d\n",
 					pring->ringno,
 					pring->local_getidx, max_cmd_idx);
 
@@ -1628,12 +1628,12 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 {
 	struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
 	/*
-	 * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
+	 * Ring <ringno> handler: portRspPut <portRspPut> is bigger than
 	 * rsp ring <portRspMax>
 	 */
 	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 			"0312 Ring %d handler: portRspPut %d "
-			"is bigger then rsp ring %d\n",
+			"is bigger than rsp ring %d\n",
 			pring->ringno, le32_to_cpu(pgp->rspPutInx),
 			pring->numRiocb);
 
@@ -2083,12 +2083,12 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
 	portRspPut = le32_to_cpu(pgp->rspPutInx);
 	if (portRspPut >= portRspMax) {
 		/*
-		 * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
+		 * Ring <ringno> handler: portRspPut <portRspPut> is bigger than
 		 * rsp ring <portRspMax>
 		 */
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 				"0303 Ring %d handler: portRspPut %d "
-				"is bigger then rsp ring %d\n",
+				"is bigger than rsp ring %d\n",
 				pring->ringno, portRspPut, portRspMax);
 
 		phba->link_state = LPFC_HBA_ERROR;
diff --git a/trunk/drivers/scsi/megaraid.c b/trunk/drivers/scsi/megaraid.c
index 7dc62deb4087..9fdcd60c5493 100644
--- a/trunk/drivers/scsi/megaraid.c
+++ b/trunk/drivers/scsi/megaraid.c
@@ -1967,8 +1967,8 @@ megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor)
 			scb->state |= aor;
 
 			/*
-			 * Check if this command has firmare owenership. If
-			 * yes, we cannot reset this command. Whenever, f/w
+			 * Check if this command has firmware ownership. If
+			 * yes, we cannot reset this command. Whenever f/w
 			 * completes this command, we will return appropriate
 			 * status from ISR.
 			 */
diff --git a/trunk/drivers/scsi/qla1280.c b/trunk/drivers/scsi/qla1280.c
index 8cb9240596ab..df09820e8916 100644
--- a/trunk/drivers/scsi/qla1280.c
+++ b/trunk/drivers/scsi/qla1280.c
@@ -128,7 +128,7 @@
 	- Integrate ql12160_set_target_parameters() with 1280 version
 	- Make qla1280_setup() non static
 	- Do not call qla1280_check_for_dead_scsi_bus() on every I/O request
-	  sent to the card - this command pauses the firmare!!!
+	  sent to the card - this command pauses the firmware!!!
     Rev  3.23.15 Beta March 19, 2002, Jes Sorensen
 	- Clean up qla1280.h - remove obsolete QL_DEBUG_LEVEL_x definitions
 	- Remove a pile of pointless and confusing (srb_t **) and
@@ -659,7 +659,7 @@ static int qla1280_read_nvram(struct scsi_qla_host *ha)
 	/* The firmware interface is, um, interesting, in that the
 	 * actual firmware image on the chip is little endian, thus,
 	 * the process of taking that image to the CPU would end up
-	 * little endian.  However, the firmare interface requires it
+	 * little endian.  However, the firmware interface requires it
 	 * to be read a word (two bytes) at a time.
 	 *
 	 * The net result of this would be that the word (and
diff --git a/trunk/drivers/scsi/qla4xxx/ql4_mbx.c b/trunk/drivers/scsi/qla4xxx/ql4_mbx.c
index c577d79bd7e8..051b0f5e8c8e 100644
--- a/trunk/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/trunk/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -392,7 +392,7 @@ int qla4xxx_get_firmware_status(struct scsi_qla_host * ha)
 		ha->iocb_hiwat -= IOCB_HIWAT_CUSHION;
 	else
 		dev_info(&ha->pdev->dev, "WARNING!!!  You have less than %d "
-			   "firmare IOCBs available (%d).\n",
+			   "firmware IOCBs available (%d).\n",
 			   IOCB_HIWAT_CUSHION, ha->iocb_hiwat);
 
 	return QLA_SUCCESS;
diff --git a/trunk/drivers/scsi/scsi_error.c b/trunk/drivers/scsi/scsi_error.c
index 381838ebd460..d86ebea9350a 100644
--- a/trunk/drivers/scsi/scsi_error.c
+++ b/trunk/drivers/scsi/scsi_error.c
@@ -1650,7 +1650,7 @@ int scsi_error_handler(void *data)
 	 * We use TASK_INTERRUPTIBLE so that the thread is not
 	 * counted against the load average as a running process.
 	 * We never actually get interrupted because kthread_run
-	 * disables singal delivery for the created thread.
+	 * disables signal delivery for the created thread.
 	 */
 	set_current_state(TASK_INTERRUPTIBLE);
 	while (!kthread_should_stop()) {
diff --git a/trunk/drivers/serial/8250.c b/trunk/drivers/serial/8250.c
index daa00567bc44..1889a63ebc22 100644
--- a/trunk/drivers/serial/8250.c
+++ b/trunk/drivers/serial/8250.c
@@ -3123,7 +3123,7 @@ static int __init serial8250_init(void)
 	if (nr_uarts > UART_NR)
 		nr_uarts = UART_NR;
 
-	printk(KERN_INFO "Serial: 8250/16550 driver"
+	printk(KERN_INFO "Serial: 8250/16550 driver, "
 		"%d ports, IRQ sharing %sabled\n", nr_uarts,
 		share_irqs ? "en" : "dis");
 
diff --git a/trunk/drivers/serial/crisv10.c b/trunk/drivers/serial/crisv10.c
index 8b2c619a09f2..e642c22c80e2 100644
--- a/trunk/drivers/serial/crisv10.c
+++ b/trunk/drivers/serial/crisv10.c
@@ -1203,7 +1203,7 @@ static void e100_disable_txdma_channel(struct e100_serial *info)
 	unsigned long flags;
 
 	/* Disable output DMA channel for the serial port in question
-	 * ( set to something other then serialX)
+	 * ( set to something other than serialX)
 	 */
 	local_irq_save(flags);
 	DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line));
@@ -1266,7 +1266,7 @@ static void e100_disable_rxdma_channel(struct e100_serial *info)
 	unsigned long flags;
 
 	/* Disable input DMA channel for the serial port in question
-	 * ( set to something other then serialX)
+	 * ( set to something other than serialX)
 	 */
 	local_irq_save(flags);
 	if (info->line == 0) {
diff --git a/trunk/drivers/uwb/i1480/dfu/usb.c b/trunk/drivers/uwb/i1480/dfu/usb.c
index 686795e97195..c7080d497311 100644
--- a/trunk/drivers/uwb/i1480/dfu/usb.c
+++ b/trunk/drivers/uwb/i1480/dfu/usb.c
@@ -387,7 +387,7 @@ int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id)
 		goto error_create;
 	}
 
-	/* setup the fops and upload the firmare */
+	/* setup the fops and upload the firmware */
 	i1480->pre_fw_name = "i1480-pre-phy-0.0.bin";
 	i1480->mac_fw_name = "i1480-usb-0.0.bin";
 	i1480->mac_fw_name_deprecate = "ptc-0.0.bin";
diff --git a/trunk/drivers/video/console/vgacon.c b/trunk/drivers/video/console/vgacon.c
index e6210725b9ab..d012edda6d11 100644
--- a/trunk/drivers/video/console/vgacon.c
+++ b/trunk/drivers/video/console/vgacon.c
@@ -1332,7 +1332,7 @@ static void vgacon_save_screen(struct vc_data *c)
 		c->vc_y = screen_info.orig_y;
 	}
 
-	/* We can't copy in more then the size of the video buffer,
+	/* We can't copy in more than the size of the video buffer,
 	 * or we'll be copying in VGA BIOS */
 
 	if (!vga_is_gfx)
diff --git a/trunk/fs/gfs2/Kconfig b/trunk/fs/gfs2/Kconfig
index ab2f57e3fb87..e563a6449811 100644
--- a/trunk/fs/gfs2/Kconfig
+++ b/trunk/fs/gfs2/Kconfig
@@ -1,6 +1,6 @@
 config GFS2_FS
 	tristate "GFS2 file system support"
-	depends on EXPERIMENTAL && (64BIT || (LSF && LBD))
+	depends on EXPERIMENTAL && (64BIT || LBD)
 	select FS_POSIX_ACL
 	select CRC32
 	help
diff --git a/trunk/fs/gfs2/ops_address.c b/trunk/fs/gfs2/ops_address.c
index 6e4ea36c6605..4ddab67867eb 100644
--- a/trunk/fs/gfs2/ops_address.c
+++ b/trunk/fs/gfs2/ops_address.c
@@ -675,6 +675,7 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping,
 		goto out_trans_fail;
 
 	error = -ENOMEM;
+	flags |= AOP_FLAG_NOFS;
 	page = grab_cache_page_write_begin(mapping, index, flags);
 	*pagep = page;
 	if (unlikely(!page))
diff --git a/trunk/fs/gfs2/ops_file.c b/trunk/fs/gfs2/ops_file.c
index 289c5f54ba53..93fe41b67f97 100644
--- a/trunk/fs/gfs2/ops_file.c
+++ b/trunk/fs/gfs2/ops_file.c
@@ -342,7 +342,7 @@ static int gfs2_page_mkwrite(struct vm_area_struct *vma, struct page *page)
 	struct gfs2_inode *ip = GFS2_I(inode);
 	struct gfs2_sbd *sdp = GFS2_SB(inode);
 	unsigned long last_index;
-	u64 pos = page->index << (PAGE_CACHE_SIZE - inode->i_blkbits);
+	u64 pos = page->index << PAGE_CACHE_SHIFT;
 	unsigned int data_blocks, ind_blocks, rblocks;
 	int alloc_required = 0;
 	struct gfs2_holder gh;
diff --git a/trunk/fs/ncpfs/ioctl.c b/trunk/fs/ncpfs/ioctl.c
index 6d04e050c74e..f54360f50a9c 100644
--- a/trunk/fs/ncpfs/ioctl.c
+++ b/trunk/fs/ncpfs/ioctl.c
@@ -98,7 +98,7 @@ struct compat_ncp_objectname_ioctl
 {
 	s32		auth_type;
 	u32		object_name_len;
-	compat_caddr_t	object_name;	/* an userspace data, in most cases user name */
+	compat_caddr_t	object_name;	/* a userspace data, in most cases user name */
 };
 
 struct compat_ncp_fs_info_v2 {
diff --git a/trunk/fs/ocfs2/cluster/heartbeat.c b/trunk/fs/ocfs2/cluster/heartbeat.c
index 6ebaa58e2c03..04697ba7f73e 100644
--- a/trunk/fs/ocfs2/cluster/heartbeat.c
+++ b/trunk/fs/ocfs2/cluster/heartbeat.c
@@ -854,7 +854,7 @@ static int o2hb_thread(void *data)
 
 	while (!kthread_should_stop() && !reg->hr_unclean_stop) {
 		/* We track the time spent inside
-		 * o2hb_do_disk_heartbeat so that we avoid more then
+		 * o2hb_do_disk_heartbeat so that we avoid more than
 		 * hr_timeout_ms between disk writes. On busy systems
 		 * this should result in a heartbeat which is less
 		 * likely to time itself out. */
diff --git a/trunk/fs/proc/task_nommu.c b/trunk/fs/proc/task_nommu.c
index 219bd79ea894..d4a8be32b902 100644
--- a/trunk/fs/proc/task_nommu.c
+++ b/trunk/fs/proc/task_nommu.c
@@ -9,7 +9,7 @@
 
 /*
  * Logic: we've got two memory sums for each process, "shared", and
- * "non-shared". Shared memory may get counted more then once, for
+ * "non-shared". Shared memory may get counted more than once, for
  * each process that owns it. Non-shared memory is counted
  * accurately.
  */
diff --git a/trunk/fs/ubifs/Kconfig b/trunk/fs/ubifs/Kconfig
index 91ceeda7e5bf..e35b54d5059d 100644
--- a/trunk/fs/ubifs/Kconfig
+++ b/trunk/fs/ubifs/Kconfig
@@ -40,7 +40,7 @@ config UBIFS_FS_ZLIB
 	depends on UBIFS_FS
 	default y
 	help
-	  Zlib copresses better then LZO but it is slower. Say 'Y' if unsure.
+	  Zlib compresses better than LZO but it is slower. Say 'Y' if unsure.
 
 # Debugging-related stuff
 config UBIFS_FS_DEBUG
diff --git a/trunk/fs/ubifs/budget.c b/trunk/fs/ubifs/budget.c
index 0e5e54d82924..175f9c590b77 100644
--- a/trunk/fs/ubifs/budget.c
+++ b/trunk/fs/ubifs/budget.c
@@ -142,7 +142,7 @@ static long long get_liability(struct ubifs_info *c)
  *
  * This function is called when an operation cannot be budgeted because there
  * is supposedly no free space. But in most cases there is some free space:
- *   o budgeting is pessimistic, so it always budgets more then it is actually
+ *   o budgeting is pessimistic, so it always budgets more than it is actually
  *     needed, so shrinking the liability is one way to make free space - the
  *     cached data will take less space then it was budgeted for;
  *   o GC may turn some dark space into free space (budgeting treats dark space
@@ -606,7 +606,7 @@ void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req)
  * @c: UBIFS file-system description object
  *
  * This function converts budget which was allocated for a new page of data to
- * the budget of changing an existing page of data. The latter is smaller then
+ * the budget of changing an existing page of data. The latter is smaller than
  * the former, so this function only does simple re-calculation and does not
  * involve any write-back.
  */
diff --git a/trunk/fs/ubifs/gc.c b/trunk/fs/ubifs/gc.c
index 0bef6501d58a..9832f9abe28e 100644
--- a/trunk/fs/ubifs/gc.c
+++ b/trunk/fs/ubifs/gc.c
@@ -45,7 +45,7 @@
 #define SMALL_NODE_WM  UBIFS_MAX_DENT_NODE_SZ
 
 /*
- * GC may need to move more then one LEB to make progress. The below constants
+ * GC may need to move more than one LEB to make progress. The below constants
  * define "soft" and "hard" limits on the number of LEBs the garbage collector
  * may move.
  */
diff --git a/trunk/fs/ubifs/journal.c b/trunk/fs/ubifs/journal.c
index 10ae25b7d1db..9b7c54e0cd2a 100644
--- a/trunk/fs/ubifs/journal.c
+++ b/trunk/fs/ubifs/journal.c
@@ -191,7 +191,7 @@ static int reserve_space(struct ubifs_info *c, int jhead, int len)
 	if (wbuf->lnum != -1 && avail >= len) {
 		/*
 		 * Someone else has switched the journal head and we have
-		 * enough space now. This happens when more then one process is
+		 * enough space now. This happens when more than one process is
 		 * trying to write to the same journal head at the same time.
 		 */
 		dbg_jnl("return LEB %d back, already have LEB %d:%d",
diff --git a/trunk/fs/ubifs/shrinker.c b/trunk/fs/ubifs/shrinker.c
index f248533841a2..e7bab52a1410 100644
--- a/trunk/fs/ubifs/shrinker.c
+++ b/trunk/fs/ubifs/shrinker.c
@@ -151,7 +151,7 @@ static int shrink_tnc(struct ubifs_info *c, int nr, int age, int *contention)
  * @contention: if any contention, this is set to %1
  *
  * This function walks the list of mounted UBIFS file-systems and frees clean
- * znodes which are older then @age, until at least @nr znodes are freed.
+ * znodes which are older than @age, until at least @nr znodes are freed.
  * Returns the number of freed znodes.
  */
 static int shrink_tnc_trees(int nr, int age, int *contention)
diff --git a/trunk/fs/xfs/linux-2.6/xfs_super.c b/trunk/fs/xfs/linux-2.6/xfs_super.c
index 36f6cc703ef2..be846d606ae8 100644
--- a/trunk/fs/xfs/linux-2.6/xfs_super.c
+++ b/trunk/fs/xfs/linux-2.6/xfs_super.c
@@ -1348,7 +1348,7 @@ xfs_finish_flags(
 {
 	int			ronly = (mp->m_flags & XFS_MOUNT_RDONLY);
 
-	/* Fail a mount where the logbuf is smaller then the log stripe */
+	/* Fail a mount where the logbuf is smaller than the log stripe */
 	if (xfs_sb_version_haslogv2(&mp->m_sb)) {
 		if (mp->m_logbsize <= 0 &&
 		    mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE) {
diff --git a/trunk/include/acpi/acmacros.h b/trunk/include/acpi/acmacros.h
index a597207e2835..1954c9d1d012 100644
--- a/trunk/include/acpi/acmacros.h
+++ b/trunk/include/acpi/acmacros.h
@@ -333,8 +333,8 @@ struct acpi_integer_overlay {
 #define ACPI_INSERT_BITS(target, mask, source)          target = ((target & (~(mask))) | (source & mask))
 
 /*
- * An struct acpi_namespace_node can appear in some contexts
- * where a pointer to an union acpi_operand_object can also
+ * A struct acpi_namespace_node can appear in some contexts
+ * where a pointer to a union acpi_operand_object can also
  * appear. This macro is used to distinguish them.
  *
  * The "Descriptor" field is the first field in both structures.
diff --git a/trunk/include/acpi/actypes.h b/trunk/include/acpi/actypes.h
index 7220361790b3..8222e8de0d1c 100644
--- a/trunk/include/acpi/actypes.h
+++ b/trunk/include/acpi/actypes.h
@@ -467,7 +467,7 @@ typedef u32 acpi_object_type;
 
 /*
  * These are special object types that never appear in
- * a Namespace node, only in an union acpi_operand_object
+ * a Namespace node, only in a union acpi_operand_object
  */
 #define ACPI_TYPE_LOCAL_EXTRA           0x1C
 #define ACPI_TYPE_LOCAL_DATA            0x1D
diff --git a/trunk/arch/avr32/include/asm/atmel-mci.h b/trunk/include/linux/atmel-mci.h
similarity index 91%
rename from trunk/arch/avr32/include/asm/atmel-mci.h
rename to trunk/include/linux/atmel-mci.h
index 59f3fadd0b68..2a2213eefd85 100644
--- a/trunk/arch/avr32/include/asm/atmel-mci.h
+++ b/trunk/include/linux/atmel-mci.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_AVR32_ATMEL_MCI_H
-#define __ASM_AVR32_ATMEL_MCI_H
+#ifndef __LINUX_ATMEL_MCI_H
+#define __LINUX_ATMEL_MCI_H
 
 #define ATMEL_MCI_MAX_NR_SLOTS	2
 
@@ -36,4 +36,4 @@ struct mci_platform_data {
 	struct mci_slot_pdata	slot[ATMEL_MCI_MAX_NR_SLOTS];
 };
 
-#endif /* __ASM_AVR32_ATMEL_MCI_H */
+#endif /* __LINUX_ATMEL_MCI_H */
diff --git a/trunk/include/linux/mtd/mtd.h b/trunk/include/linux/mtd/mtd.h
index eae26bb6430a..64433eb411d7 100644
--- a/trunk/include/linux/mtd/mtd.h
+++ b/trunk/include/linux/mtd/mtd.h
@@ -83,7 +83,7 @@ typedef enum {
  * @datbuf:	data buffer - if NULL only oob data are read/written
  * @oobbuf:	oob data buffer
  *
- * Note, it is allowed to read more then one OOB area at one go, but not write.
+ * Note, it is allowed to read more than one OOB area at one go, but not write.
  * The interface assumes that the OOB write requests program only one page's
  * OOB area.
  */
diff --git a/trunk/include/linux/ncp_fs.h b/trunk/include/linux/ncp_fs.h
index 9f2d76347f19..f69e66d151cc 100644
--- a/trunk/include/linux/ncp_fs.h
+++ b/trunk/include/linux/ncp_fs.h
@@ -87,7 +87,7 @@ struct ncp_objectname_ioctl
 #define NCP_AUTH_NDS	0x32
 	int		auth_type;
 	size_t		object_name_len;
-	void __user *	object_name;	/* an userspace data, in most cases user name */
+	void __user *	object_name;	/* a userspace data, in most cases user name */
 };
 
 struct ncp_privatedata_ioctl
diff --git a/trunk/include/linux/spi/spi.h b/trunk/include/linux/spi/spi.h
index 82229317753d..68bb1c501d0d 100644
--- a/trunk/include/linux/spi/spi.h
+++ b/trunk/include/linux/spi/spi.h
@@ -327,9 +327,9 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
  * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped
  * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped
  * @len: size of rx and tx buffers (in bytes)
- * @speed_hz: Select a speed other then the device default for this
+ * @speed_hz: Select a speed other than the device default for this
  *      transfer. If 0 the default (from @spi_device) is used.
- * @bits_per_word: select a bits_per_word other then the device default
+ * @bits_per_word: select a bits_per_word other than the device default
  *      for this transfer. If 0 the default (from @spi_device) is used.
  * @cs_change: affects chipselect after this transfer completes
  * @delay_usecs: microseconds to delay after this transfer before
diff --git a/trunk/include/linux/types.h b/trunk/include/linux/types.h
index 3b864f2d9560..712ca53bc348 100644
--- a/trunk/include/linux/types.h
+++ b/trunk/include/linux/types.h
@@ -176,10 +176,9 @@ typedef __u16 __bitwise __le16;
 typedef __u16 __bitwise __be16;
 typedef __u32 __bitwise __le32;
 typedef __u32 __bitwise __be32;
-#if defined(__GNUC__)
 typedef __u64 __bitwise __le64;
 typedef __u64 __bitwise __be64;
-#endif
+
 typedef __u16 __bitwise __sum16;
 typedef __u32 __bitwise __wsum;
 
diff --git a/trunk/include/mtd/ubi-user.h b/trunk/include/mtd/ubi-user.h
index ccdc562e444e..2dc2eb2b8e22 100644
--- a/trunk/include/mtd/ubi-user.h
+++ b/trunk/include/mtd/ubi-user.h
@@ -253,7 +253,7 @@ struct ubi_mkvol_req {
  *
  * Re-sizing is possible for both dynamic and static volumes. But while dynamic
  * volumes may be re-sized arbitrarily, static volumes cannot be made to be
- * smaller then the number of bytes they bear. To arbitrarily shrink a static
+ * smaller than the number of bytes they bear. To arbitrarily shrink a static
  * volume, it must be wiped out first (by means of volume update operation with
  * zero number of bytes).
  */
diff --git a/trunk/init/main.c b/trunk/init/main.c
index b5a892c68375..05b313283311 100644
--- a/trunk/init/main.c
+++ b/trunk/init/main.c
@@ -599,7 +599,8 @@ asmlinkage void __init start_kernel(void)
 	sched_clock_init();
 	profile_init();
 	if (!irqs_disabled())
-		printk("start_kernel(): bug: interrupts were enabled early\n");
+		printk(KERN_CRIT "start_kernel(): bug: interrupts were "
+				 "enabled early\n");
 	early_boot_irqs_on();
 	local_irq_enable();
 
diff --git a/trunk/kernel/cpu.c b/trunk/kernel/cpu.c
index 30e74dd6d01b..79e40f00dcb8 100644
--- a/trunk/kernel/cpu.c
+++ b/trunk/kernel/cpu.c
@@ -379,8 +379,11 @@ static cpumask_var_t frozen_cpus;
 
 int disable_nonboot_cpus(void)
 {
-	int cpu, first_cpu, error = 0;
+	int cpu, first_cpu, error;
 
+	error = stop_machine_create();
+	if (error)
+		return error;
 	cpu_maps_update_begin();
 	first_cpu = cpumask_first(cpu_online_mask);
 	/* We take down all of the non-boot CPUs in one shot to avoid races
@@ -409,6 +412,7 @@ int disable_nonboot_cpus(void)
 		printk(KERN_ERR "Non-boot CPUs are not disabled\n");
 	}
 	cpu_maps_update_done();
+	stop_machine_destroy();
 	return error;
 }
 
diff --git a/trunk/kernel/pid.c b/trunk/kernel/pid.c
index 064e76afa507..af9224cdd6c0 100644
--- a/trunk/kernel/pid.c
+++ b/trunk/kernel/pid.c
@@ -475,7 +475,7 @@ pid_t task_session_nr_ns(struct task_struct *tsk, struct pid_namespace *ns)
 EXPORT_SYMBOL(task_session_nr_ns);
 
 /*
- * Used by proc to find the first pid that is greater then or equal to nr.
+ * Used by proc to find the first pid that is greater than or equal to nr.
  *
  * If there is a pid at nr this function is exactly the same as find_pid_ns.
  */
diff --git a/trunk/kernel/printk.c b/trunk/kernel/printk.c
index e651ab05655f..7015733793e8 100644
--- a/trunk/kernel/printk.c
+++ b/trunk/kernel/printk.c
@@ -619,7 +619,7 @@ static int acquire_console_semaphore_for_printk(unsigned int cpu)
 static const char recursion_bug_msg [] =
 		KERN_CRIT "BUG: recent printk recursion!\n";
 static int recursion_bug;
-	static int new_text_line = 1;
+static int new_text_line = 1;
 static char printk_buf[1024];
 
 asmlinkage int vprintk(const char *fmt, va_list args)
diff --git a/trunk/kernel/time/jiffies.c b/trunk/kernel/time/jiffies.c
index 1ca99557e929..06f197560f3b 100644
--- a/trunk/kernel/time/jiffies.c
+++ b/trunk/kernel/time/jiffies.c
@@ -45,7 +45,7 @@
  *
  * The value 8 is somewhat carefully chosen, as anything
  * larger can result in overflows. NSEC_PER_JIFFY grows as
- * HZ shrinks, so values greater then 8 overflow 32bits when
+ * HZ shrinks, so values greater than 8 overflow 32bits when
  * HZ=100.
  */
 #define JIFFIES_SHIFT	8
diff --git a/trunk/lib/radix-tree.c b/trunk/lib/radix-tree.c
index 8d3fb0bd1288..4bb42a0344ec 100644
--- a/trunk/lib/radix-tree.c
+++ b/trunk/lib/radix-tree.c
@@ -640,13 +640,14 @@ EXPORT_SYMBOL(radix_tree_tag_get);
  *
  *	Returns: the index of the hole if found, otherwise returns an index
  *	outside of the set specified (in which case 'return - index >= max_scan'
- *	will be true).
+ *	will be true). In rare cases of index wrap-around, 0 will be returned.
  *
  *	radix_tree_next_hole may be called under rcu_read_lock. However, like
- *	radix_tree_gang_lookup, this will not atomically search a snapshot of the
- *	tree at a single point in time. For example, if a hole is created at index
- *	5, then subsequently a hole is created at index 10, radix_tree_next_hole
- *	covering both indexes may return 10 if called under rcu_read_lock.
+ *	radix_tree_gang_lookup, this will not atomically search a snapshot of
+ *	the tree at a single point in time. For example, if a hole is created
+ *	at index 5, then subsequently a hole is created at index 10,
+ *	radix_tree_next_hole covering both indexes may return 10 if called
+ *	under rcu_read_lock.
  */
 unsigned long radix_tree_next_hole(struct radix_tree_root *root,
 				unsigned long index, unsigned long max_scan)
diff --git a/trunk/mm/slub.c b/trunk/mm/slub.c
index f0e2892fe403..6392ae5cc6b1 100644
--- a/trunk/mm/slub.c
+++ b/trunk/mm/slub.c
@@ -2254,7 +2254,7 @@ static int calculate_sizes(struct kmem_cache *s, int forced_order)
 		 * Add some empty padding so that we can catch
 		 * overwrites from earlier objects rather than let
 		 * tracking information or the free pointer be
-		 * corrupted if an user writes before the start
+		 * corrupted if a user writes before the start
 		 * of the object.
 		 */
 		size += sizeof(void *);
diff --git a/trunk/net/sctp/auth.c b/trunk/net/sctp/auth.c
index 52db5f60daa0..20c576f530fa 100644
--- a/trunk/net/sctp/auth.c
+++ b/trunk/net/sctp/auth.c
@@ -141,8 +141,8 @@ void sctp_auth_destroy_keys(struct list_head *keys)
 /* Compare two byte vectors as numbers.  Return values
  * are:
  * 	  0 - vectors are equal
- * 	< 0 - vector 1 is smaller then vector2
- * 	> 0 - vector 1 is greater then vector2
+ * 	< 0 - vector 1 is smaller than vector2
+ * 	> 0 - vector 1 is greater than vector2
  *
  * Algorithm is:
  * 	This is performed by selecting the numerically smaller key vector...
diff --git a/trunk/net/sctp/sm_statefuns.c b/trunk/net/sctp/sm_statefuns.c
index 1c4e5d6c29c0..3a0cd075914f 100644
--- a/trunk/net/sctp/sm_statefuns.c
+++ b/trunk/net/sctp/sm_statefuns.c
@@ -4268,9 +4268,9 @@ static sctp_disposition_t sctp_sf_abort_violation(
 
 /*
  * Handle a protocol violation when the chunk length is invalid.
- * "Invalid" length is identified as smaller then the minimal length a
+ * "Invalid" length is identified as smaller than the minimal length a
  * given chunk can be.  For example, a SACK chunk has invalid length
- * if it's length is set to be smaller then the size of sctp_sack_chunk_t.
+ * if its length is set to be smaller than the size of sctp_sack_chunk_t.
  *
  * We inform the other end by sending an ABORT with a Protocol Violation
  * error code.
@@ -4300,7 +4300,7 @@ static sctp_disposition_t sctp_sf_violation_chunklen(
 
 /*
  * Handle a protocol violation when the parameter length is invalid.
- * "Invalid" length is identified as smaller then the minimal length a
+ * "Invalid" length is identified as smaller than the minimal length a
  * given parameter can be.
  */
 static sctp_disposition_t sctp_sf_violation_paramlen(
diff --git a/trunk/net/sctp/socket.c b/trunk/net/sctp/socket.c
index b14a8f33e42d..ff0a8f88de04 100644
--- a/trunk/net/sctp/socket.c
+++ b/trunk/net/sctp/socket.c
@@ -2717,7 +2717,7 @@ static int sctp_setsockopt_associnfo(struct sock *sk, char __user *optval, int o
 				paths++;
 			}
 
-			/* Only validate asocmaxrxt if we have more then
+			/* Only validate asocmaxrxt if we have more than
 			 * one path/transport.  We do this because path
 			 * retransmissions are only counted when we have more
 			 * then one path.
diff --git a/trunk/net/sctp/tsnmap.c b/trunk/net/sctp/tsnmap.c
index 35c73e82553a..9bd64565021a 100644
--- a/trunk/net/sctp/tsnmap.c
+++ b/trunk/net/sctp/tsnmap.c
@@ -227,7 +227,7 @@ void sctp_tsnmap_skip(struct sctp_tsnmap *map, __u32 tsn)
 		 */
 		bitmap_zero(map->tsn_map, map->len);
 	} else {
-		/* If the gap is smaller then the map size,
+		/* If the gap is smaller than the map size,
 		 * shift the map by 'gap' bits and update further.
 		 */
 		bitmap_shift_right(map->tsn_map, map->tsn_map, gap, map->len);
diff --git a/trunk/sound/oss/aedsp16.c b/trunk/sound/oss/aedsp16.c
index a0274f3dac08..3ee9900ffd7b 100644
--- a/trunk/sound/oss/aedsp16.c
+++ b/trunk/sound/oss/aedsp16.c
@@ -157,7 +157,7 @@
 
    Started Fri Mar 17 16:13:18 MET 1995
 
-   v0.1 (ALPHA, was an user-level program called AudioExcelDSP16.c)
+   v0.1 (ALPHA, was a user-level program called AudioExcelDSP16.c)
    - Initial code.
    v0.2 (ALPHA)
    - Cleanups.
diff --git a/trunk/sound/usb/usx2y/usbusx2y.c b/trunk/sound/usb/usx2y/usbusx2y.c
index ca26c532e77e..11639bd72a51 100644
--- a/trunk/sound/usb/usx2y/usbusx2y.c
+++ b/trunk/sound/usb/usx2y/usbusx2y.c
@@ -238,7 +238,7 @@ static void i_usX2Y_In04Int(struct urb *urb)
 					send = 0;
 				for (j = 0; j < URBS_AsyncSeq  &&  !err; ++j)
 					if (0 == usX2Y->AS04.urb[j]->status) {
-						struct us428_p4out *p4out = us428ctls->p4out + send;	// FIXME if more then 1 p4out is new, 1 gets lost.
+						struct us428_p4out *p4out = us428ctls->p4out + send;	// FIXME if more than 1 p4out is new, 1 gets lost.
 						usb_fill_bulk_urb(usX2Y->AS04.urb[j], usX2Y->chip.dev,
 								  usb_sndbulkpipe(usX2Y->chip.dev, 0x04), &p4out->val.vol, 
 								  p4out->type == eLT_Light ? sizeof(struct us428_lights) : 5,