From e45d481ae8b8dfea5f33b878efef0d29596df012 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Philippe=20R=C3=A9tornaz?= Date: Fri, 20 Jan 2012 18:58:22 +0100 Subject: [PATCH] --- yaml --- r: 295909 b: refs/heads/master c: 0fbe6b07b77d85a02c63f5c5f5f3d08e79ec0e53 h: refs/heads/master i: 295907: 1b2a44d1b547dffa32d65389a2a0464449566d82 v: v3 --- [refs] | 2 +- trunk/arch/arm/Kconfig | 1 - trunk/arch/arm/Kconfig.debug | 156 +++++------ .../arch/arm/boot/dts/kirkwood-dreamplug.dts | 25 -- trunk/arch/arm/boot/dts/kirkwood.dtsi | 6 - trunk/arch/arm/include/asm/system.h | 1 - trunk/arch/arm/kernel/process.c | 27 +- trunk/arch/arm/mach-at91/at91cap9.c | 8 - trunk/arch/arm/mach-at91/at91rm9200.c | 10 - trunk/arch/arm/mach-at91/at91sam9260.c | 8 - trunk/arch/arm/mach-at91/at91sam9261.c | 8 - trunk/arch/arm/mach-at91/at91sam9263.c | 8 - trunk/arch/arm/mach-at91/at91sam9g45.c | 7 - trunk/arch/arm/mach-at91/at91sam9rl.c | 8 - trunk/arch/arm/mach-at91/at91x40.c | 12 - .../arch/arm/mach-at91/include/mach/system.h | 50 ++++ trunk/arch/arm/mach-bcmring/core.c | 23 +- .../arm/mach-bcmring/include/mach/system.h | 28 ++ trunk/arch/arm/mach-clps711x/common.c | 16 -- .../arm/mach-clps711x/include/mach/system.h | 35 +++ .../arm/mach-cns3xxx/include/mach/system.h | 25 ++ .../arm/mach-davinci/include/mach/system.h | 21 ++ .../arch/arm/mach-dove/include/mach/system.h | 17 ++ trunk/arch/arm/mach-ebsa110/core.c | 25 -- .../arm/mach-ebsa110/include/mach/system.h | 37 +++ trunk/arch/arm/mach-ep93xx/core.c | 46 +++- .../arm/mach-ep93xx/include/mach/system.h | 7 + trunk/arch/arm/mach-exynos/common.c | 12 + trunk/arch/arm/mach-exynos/dma.c | 38 ++- .../arm/mach-exynos/include/mach/system.h | 20 ++ .../arm/mach-footbridge/include/mach/system.h | 13 + trunk/arch/arm/mach-gemini/Makefile | 2 +- trunk/arch/arm/mach-gemini/idle.c | 29 -- .../arm/mach-gemini/include/mach/system.h | 14 + trunk/arch/arm/mach-gemini/irq.c | 4 +- trunk/arch/arm/mach-h720x/common.c | 18 -- .../arch/arm/mach-h720x/include/mach/system.h | 27 ++ .../arm/mach-highbank/include/mach/system.h | 24 ++ trunk/arch/arm/mach-imx/Kconfig | 4 +- .../arm/mach-imx/mach-imx27_visstrim_m10.c | 139 +--------- trunk/arch/arm/mach-imx/mach-mx31moboard.c | 2 +- trunk/arch/arm/mach-imx/mm-imx3.c | 52 ++-- trunk/arch/arm/mach-imx/mm-imx5.c | 28 +- trunk/arch/arm/mach-imx/pm-imx27.c | 3 +- trunk/arch/arm/mach-integrator/core.c | 70 ++++- trunk/arch/arm/mach-integrator/impd1.c | 9 +- .../arm/mach-integrator/include/mach/system.h | 33 +++ .../arch/arm/mach-integrator/integrator_cp.c | 49 +++- .../arm/mach-iop13xx/include/mach/system.h | 13 + .../arm/mach-iop32x/include/mach/system.h | 13 + .../arm/mach-iop33x/include/mach/system.h | 13 + .../arm/mach-ixp2000/include/mach/system.h | 14 + trunk/arch/arm/mach-ixp23xx/core.c | 3 - .../arm/mach-ixp23xx/include/mach/system.h | 16 ++ trunk/arch/arm/mach-ixp4xx/common.c | 6 - .../arm/mach-ixp4xx/include/mach/system.h | 19 ++ trunk/arch/arm/mach-kirkwood/Kconfig | 14 - trunk/arch/arm/mach-kirkwood/Makefile | 1 - trunk/arch/arm/mach-kirkwood/Makefile.boot | 2 - trunk/arch/arm/mach-kirkwood/board-dt.c | 180 ------------ .../arm/mach-kirkwood/include/mach/system.h | 17 ++ .../arm/mach-ks8695/include/mach/system.h | 27 ++ .../arm/mach-lpc32xx/include/mach/system.h | 27 ++ trunk/arch/arm/mach-lpc32xx/phy3250.c | 32 ++- trunk/arch/arm/mach-mmp/include/mach/system.h | 16 ++ trunk/arch/arm/mach-mmp/mmp2.c | 1 - trunk/arch/arm/mach-mmp/pxa168.c | 1 - trunk/arch/arm/mach-mmp/pxa910.c | 1 - trunk/arch/arm/mach-msm/idle.S | 36 +++ trunk/arch/arm/mach-msm/idle.c | 49 ---- trunk/arch/arm/mach-msm/include/mach/system.h | 1 + .../arm/mach-mv78xx0/include/mach/system.h | 17 ++ trunk/arch/arm/mach-mxs/Kconfig | 16 -- trunk/arch/arm/mach-mxs/Makefile | 1 - trunk/arch/arm/mach-mxs/devices.c | 8 +- trunk/arch/arm/mach-mxs/devices/amba-duart.c | 2 +- trunk/arch/arm/mach-mxs/include/mach/digctl.h | 1 - trunk/arch/arm/mach-mxs/include/mach/mxs.h | 29 +- trunk/arch/arm/mach-mxs/include/mach/system.h | 25 ++ .../arm/mach-mxs/include/mach/uncompress.h | 13 +- trunk/arch/arm/mach-mxs/mach-apx4devkit.c | 260 ------------------ trunk/arch/arm/mach-mxs/mach-m28evk.c | 7 +- trunk/arch/arm/mach-mxs/mach-mx28evk.c | 80 ++++-- trunk/arch/arm/mach-mxs/pm.c | 3 +- trunk/arch/arm/mach-netx/fb.c | 13 +- .../arch/arm/mach-netx/include/mach/system.h | 28 ++ trunk/arch/arm/mach-nomadik/board-nhk8815.c | 17 +- trunk/arch/arm/mach-nomadik/cpu-8815.c | 9 +- .../arm/mach-nomadik/include/mach/system.h | 32 +++ trunk/arch/arm/mach-omap1/Kconfig | 2 - trunk/arch/arm/mach-omap1/board-ams-delta.c | 226 +++------------ .../arch/arm/mach-omap1/include/mach/system.h | 5 + trunk/arch/arm/mach-omap1/pm.c | 19 +- trunk/arch/arm/mach-omap2/emu.c | 26 +- .../arch/arm/mach-omap2/include/mach/system.h | 5 + trunk/arch/arm/mach-omap2/pm24xx.c | 4 +- trunk/arch/arm/mach-omap2/pm34xx.c | 6 +- trunk/arch/arm/mach-omap2/pm44xx.c | 8 +- trunk/arch/arm/mach-omap2/prm_common.c | 1 + .../arm/mach-orion5x/include/mach/system.h | 19 ++ .../arm/mach-picoxcell/include/mach/system.h | 26 ++ .../arm/mach-pnx4008/include/mach/system.h | 29 ++ .../arm/mach-prima2/include/mach/system.h | 17 ++ trunk/arch/arm/mach-pxa/hx4700.c | 27 +- trunk/arch/arm/mach-pxa/include/mach/system.h | 15 + trunk/arch/arm/mach-pxa/pxa25x.c | 1 - trunk/arch/arm/mach-pxa/pxa27x.c | 1 - trunk/arch/arm/mach-realview/core.h | 20 +- .../mach-realview/include/mach/irqs-pb1176.h | 2 +- .../arm/mach-realview/include/mach/system.h | 33 +++ trunk/arch/arm/mach-realview/realview_eb.c | 78 +++--- .../arch/arm/mach-realview/realview_pb1176.c | 78 +++--- .../arch/arm/mach-realview/realview_pb11mp.c | 78 +++--- trunk/arch/arm/mach-realview/realview_pba8.c | 78 +++--- trunk/arch/arm/mach-realview/realview_pbx.c | 78 +++--- trunk/arch/arm/mach-rpc/include/mach/system.h | 13 + .../arm/mach-s3c2410/include/mach/system.h | 54 ++++ trunk/arch/arm/mach-s3c2412/s3c2412.c | 4 +- trunk/arch/arm/mach-s3c2416/s3c2416.c | 3 + .../arm/mach-s3c64xx/include/mach/system.h | 19 ++ trunk/arch/arm/mach-s5p64x0/common.c | 15 +- trunk/arch/arm/mach-s5p64x0/dma.c | 22 +- .../arm/mach-s5p64x0/include/mach/system.h | 21 ++ trunk/arch/arm/mach-s5pc100/common.c | 12 + trunk/arch/arm/mach-s5pc100/dma.c | 38 ++- .../arm/mach-s5pc100/include/mach/system.h | 19 ++ trunk/arch/arm/mach-s5pv210/common.c | 12 + trunk/arch/arm/mach-s5pv210/dma.c | 38 ++- .../arm/mach-s5pv210/include/mach/system.h | 21 ++ .../arm/mach-sa1100/include/mach/system.h | 9 + trunk/arch/arm/mach-shark/core.c | 6 - .../arch/arm/mach-shark/include/mach/system.h | 13 + .../arm/mach-shmobile/include/mach/system.h | 5 + .../arm/mach-spear3xx/include/mach/system.h | 19 ++ trunk/arch/arm/mach-spear3xx/spear300.c | 14 +- trunk/arch/arm/mach-spear3xx/spear3xx.c | 27 +- .../arm/mach-spear6xx/include/mach/system.h | 19 ++ trunk/arch/arm/mach-spear6xx/spear6xx.c | 10 +- trunk/arch/arm/mach-tegra/common.c | 3 +- .../arch/arm/mach-tegra/include/mach/system.h | 28 ++ trunk/arch/arm/mach-u300/core.c | 85 ++++-- .../arch/arm/mach-u300/include/mach/system.h | 14 + trunk/arch/arm/mach-ux500/devices-common.c | 13 +- .../arch/arm/mach-ux500/include/mach/system.h | 20 ++ trunk/arch/arm/mach-versatile/core.c | 70 ++--- trunk/arch/arm/mach-versatile/core.h | 20 +- .../arm/mach-versatile/include/mach/system.h | 33 +++ trunk/arch/arm/mach-versatile/versatile_pb.c | 18 +- trunk/arch/arm/mach-vexpress/core.h | 17 ++ trunk/arch/arm/mach-vexpress/ct-ca9x4.c | 8 +- .../arm/mach-vexpress/include/mach/ct-ca9x4.h | 2 +- .../arm/mach-vexpress/include/mach/system.h | 33 +++ trunk/arch/arm/mach-vexpress/v2m.c | 20 +- .../arm/mach-vt8500/include/mach/system.h | 5 + trunk/arch/arm/mach-w90x900/dev.c | 1 - .../arm/mach-w90x900/include/mach/system.h | 19 ++ .../arch/arm/mach-zynq/include/mach/system.h | 23 ++ trunk/arch/arm/plat-mxc/include/mach/system.h | 25 ++ .../plat-omap/include/plat/board-ams-delta.h | 48 ++-- .../arch/arm/plat-omap/include/plat/system.h | 15 + trunk/arch/arm/plat-s3c24xx/cpu.c | 27 -- .../arch/arm/plat-spear/include/plat/system.h | 26 ++ trunk/drivers/amba/bus.c | 105 ++----- trunk/drivers/input/serio/ams_delta_serio.c | 54 ++-- trunk/drivers/leds/Kconfig | 7 + trunk/drivers/leds/Makefile | 1 + trunk/drivers/leds/leds-ams-delta.c | 126 +++++++++ trunk/drivers/mmc/host/mmci.c | 2 +- trunk/drivers/mtd/nand/ams-delta.c | 74 ++--- trunk/drivers/of/platform.c | 6 +- trunk/drivers/video/omap/lcd_ams_delta.c | 27 +- trunk/include/linux/amba/bus.h | 36 --- trunk/sound/soc/omap/ams-delta.c | 2 +- 173 files changed, 2650 insertions(+), 1928 deletions(-) delete mode 100644 trunk/arch/arm/boot/dts/kirkwood-dreamplug.dts delete mode 100644 trunk/arch/arm/boot/dts/kirkwood.dtsi create mode 100644 trunk/arch/arm/mach-at91/include/mach/system.h create mode 100644 trunk/arch/arm/mach-bcmring/include/mach/system.h create mode 100644 trunk/arch/arm/mach-clps711x/include/mach/system.h create mode 100644 trunk/arch/arm/mach-cns3xxx/include/mach/system.h create mode 100644 trunk/arch/arm/mach-davinci/include/mach/system.h create mode 100644 trunk/arch/arm/mach-dove/include/mach/system.h create mode 100644 trunk/arch/arm/mach-ebsa110/include/mach/system.h create mode 100644 trunk/arch/arm/mach-ep93xx/include/mach/system.h create mode 100644 trunk/arch/arm/mach-exynos/include/mach/system.h create mode 100644 trunk/arch/arm/mach-footbridge/include/mach/system.h delete mode 100644 trunk/arch/arm/mach-gemini/idle.c create mode 100644 trunk/arch/arm/mach-h720x/include/mach/system.h create mode 100644 trunk/arch/arm/mach-highbank/include/mach/system.h create mode 100644 trunk/arch/arm/mach-integrator/include/mach/system.h create mode 100644 trunk/arch/arm/mach-iop13xx/include/mach/system.h create mode 100644 trunk/arch/arm/mach-iop32x/include/mach/system.h create mode 100644 trunk/arch/arm/mach-iop33x/include/mach/system.h create mode 100644 trunk/arch/arm/mach-ixp2000/include/mach/system.h create mode 100644 trunk/arch/arm/mach-ixp23xx/include/mach/system.h create mode 100644 trunk/arch/arm/mach-ixp4xx/include/mach/system.h delete mode 100644 trunk/arch/arm/mach-kirkwood/board-dt.c create mode 100644 trunk/arch/arm/mach-kirkwood/include/mach/system.h create mode 100644 trunk/arch/arm/mach-ks8695/include/mach/system.h create mode 100644 trunk/arch/arm/mach-lpc32xx/include/mach/system.h create mode 100644 trunk/arch/arm/mach-mmp/include/mach/system.h create mode 100644 trunk/arch/arm/mach-msm/idle.S delete mode 100644 trunk/arch/arm/mach-msm/idle.c create mode 100644 trunk/arch/arm/mach-mv78xx0/include/mach/system.h create mode 100644 trunk/arch/arm/mach-mxs/include/mach/system.h delete mode 100644 trunk/arch/arm/mach-mxs/mach-apx4devkit.c create mode 100644 trunk/arch/arm/mach-netx/include/mach/system.h create mode 100644 trunk/arch/arm/mach-nomadik/include/mach/system.h create mode 100644 trunk/arch/arm/mach-omap1/include/mach/system.h create mode 100644 trunk/arch/arm/mach-omap2/include/mach/system.h create mode 100644 trunk/arch/arm/mach-orion5x/include/mach/system.h create mode 100644 trunk/arch/arm/mach-picoxcell/include/mach/system.h create mode 100644 trunk/arch/arm/mach-pnx4008/include/mach/system.h create mode 100644 trunk/arch/arm/mach-prima2/include/mach/system.h create mode 100644 trunk/arch/arm/mach-pxa/include/mach/system.h create mode 100644 trunk/arch/arm/mach-realview/include/mach/system.h create mode 100644 trunk/arch/arm/mach-rpc/include/mach/system.h create mode 100644 trunk/arch/arm/mach-s3c2410/include/mach/system.h create mode 100644 trunk/arch/arm/mach-s3c64xx/include/mach/system.h create mode 100644 trunk/arch/arm/mach-s5p64x0/include/mach/system.h create mode 100644 trunk/arch/arm/mach-s5pc100/include/mach/system.h create mode 100644 trunk/arch/arm/mach-s5pv210/include/mach/system.h create mode 100644 trunk/arch/arm/mach-sa1100/include/mach/system.h create mode 100644 trunk/arch/arm/mach-shark/include/mach/system.h create mode 100644 trunk/arch/arm/mach-spear3xx/include/mach/system.h create mode 100644 trunk/arch/arm/mach-spear6xx/include/mach/system.h create mode 100644 trunk/arch/arm/mach-tegra/include/mach/system.h create mode 100644 trunk/arch/arm/mach-u300/include/mach/system.h create mode 100644 trunk/arch/arm/mach-ux500/include/mach/system.h create mode 100644 trunk/arch/arm/mach-versatile/include/mach/system.h create mode 100644 trunk/arch/arm/mach-vexpress/include/mach/system.h create mode 100644 trunk/arch/arm/mach-w90x900/include/mach/system.h create mode 100644 trunk/arch/arm/mach-zynq/include/mach/system.h create mode 100644 trunk/arch/arm/plat-mxc/include/mach/system.h create mode 100644 trunk/arch/arm/plat-omap/include/plat/system.h create mode 100644 trunk/arch/arm/plat-spear/include/plat/system.h create mode 100644 trunk/drivers/leds/leds-ams-delta.c diff --git a/[refs] b/[refs] index 5811a36da519..24ddf7a9798a 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 622e695886cfede6aea0ee8ba74e1b8a4c8c01e0 +refs/heads/master: 0fbe6b07b77d85a02c63f5c5f5f3d08e79ec0e53 diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig index b5a91ca2eda9..a48aecc17eac 100644 --- a/trunk/arch/arm/Kconfig +++ b/trunk/arch/arm/Kconfig @@ -1578,7 +1578,6 @@ config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 350 if ARCH_U8500 - default 264 if MACH_H4700 default 0 help Maximum number of GPIOs in the system. diff --git a/trunk/arch/arm/Kconfig.debug b/trunk/arch/arm/Kconfig.debug index 03646c4c13d1..e0d236d7ff73 100644 --- a/trunk/arch/arm/Kconfig.debug +++ b/trunk/arch/arm/Kconfig.debug @@ -81,6 +81,25 @@ choice prompt "Kernel low-level debugging port" depends on DEBUG_LL + config DEBUG_LL_UART_NONE + bool "No low-level debugging UART" + help + Say Y here if your platform doesn't provide a UART option + below. This relies on your platform choosing the right UART + definition internally in order for low-level debugging to + work. + + config DEBUG_ICEDCC + bool "Kernel low-level debugging via EmbeddedICE DCC channel" + help + Say Y here if you want the debug print routines to direct + their output to the EmbeddedICE macrocell's DCC channel using + co-processor 14. This is known to work on the ARM9 style ICE + channel and on the XScale with the PEEDI. + + Note that the system will appear to hang during boot if there + is nothing connected to read from the DCC. + config AT91_DEBUG_LL_DBGU0 bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl" depends on HAVE_AT91_DBGU0 @@ -89,6 +108,20 @@ choice bool "Kernel low-level debugging on 9263, 9g45 and cap9" depends on HAVE_AT91_DBGU1 + config DEBUG_FOOTBRIDGE_COM1 + bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the 8250 at PCI COM1. + + config DEBUG_DC21285_PORT + bool "Kernel low-level debugging messages via footbridge serial port" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the serial port in the DC21285 (Footbridge). + config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -103,20 +136,6 @@ choice Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. - config DEBUG_DC21285_PORT - bool "Kernel low-level debugging messages via footbridge serial port" - depends on FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct - their output to the serial port in the DC21285 (Footbridge). - - config DEBUG_FOOTBRIDGE_COM1 - bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" - depends on FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct - their output to the 8250 at PCI COM1. - config DEBUG_HIGHBANK_UART bool "Kernel low-level debugging messages via Highbank UART" depends on ARCH_HIGHBANK @@ -187,42 +206,38 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6Q. - config DEBUG_MSM_UART1 - bool "Kernel low-level debugging messages via MSM UART1" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + config DEBUG_S3C_UART0 + depends on PLAT_SAMSUNG + bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the first serial port on MSM devices. + their output to UART 0. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM_UART2 - bool "Kernel low-level debugging messages via MSM UART2" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 - help - Say Y here if you want the debug print routines to direct - their output to the second serial port on MSM devices. + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. - config DEBUG_MSM_UART3 - bool "Kernel low-level debugging messages via MSM UART3" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + config DEBUG_S3C_UART1 + depends on PLAT_SAMSUNG + bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the third serial port on MSM devices. + their output to UART 1. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM8660_UART - bool "Kernel low-level debugging messages via MSM 8660 UART" - depends on ARCH_MSM8X60 - select MSM_HAS_DEBUG_UART_HS - help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8660 devices. + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. - config DEBUG_MSM8960_UART - bool "Kernel low-level debugging messages via MSM 8960 UART" - depends on ARCH_MSM8960 - select MSM_HAS_DEBUG_UART_HS + config DEBUG_S3C_UART2 + depends on PLAT_SAMSUNG + bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8960 devices. + their output to UART 2. The port must have been initialised + by the boot-loader before use. + + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" @@ -240,57 +255,42 @@ choice their output to the standard serial port on the RealView PB1176 platform. - config DEBUG_S3C_UART0 - depends on PLAT_SAMSUNG - bool "Use S3C UART 0 for low-level debug" + config DEBUG_MSM_UART1 + bool "Kernel low-level debugging messages via MSM UART1" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct - their output to UART 0. The port must have been initialised - by the boot-loader before use. - - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + their output to the first serial port on MSM devices. - config DEBUG_S3C_UART1 - depends on PLAT_SAMSUNG - bool "Use S3C UART 1 for low-level debug" + config DEBUG_MSM_UART2 + bool "Kernel low-level debugging messages via MSM UART2" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct - their output to UART 1. The port must have been initialised - by the boot-loader before use. - - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + their output to the second serial port on MSM devices. - config DEBUG_S3C_UART2 - depends on PLAT_SAMSUNG - bool "Use S3C UART 2 for low-level debug" + config DEBUG_MSM_UART3 + bool "Kernel low-level debugging messages via MSM UART3" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct - their output to UART 2. The port must have been initialised - by the boot-loader before use. - - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + their output to the third serial port on MSM devices. - config DEBUG_LL_UART_NONE - bool "No low-level debugging UART" + config DEBUG_MSM8660_UART + bool "Kernel low-level debugging messages via MSM 8660 UART" + depends on ARCH_MSM8X60 + select MSM_HAS_DEBUG_UART_HS help - Say Y here if your platform doesn't provide a UART option - below. This relies on your platform choosing the right UART - definition internally in order for low-level debugging to - work. + Say Y here if you want the debug print routines to direct + their output to the serial port on MSM 8660 devices. - config DEBUG_ICEDCC - bool "Kernel low-level debugging via EmbeddedICE DCC channel" + config DEBUG_MSM8960_UART + bool "Kernel low-level debugging messages via MSM 8960 UART" + depends on ARCH_MSM8960 + select MSM_HAS_DEBUG_UART_HS help Say Y here if you want the debug print routines to direct - their output to the EmbeddedICE macrocell's DCC channel using - co-processor 14. This is known to work on the ARM9 style ICE - channel and on the XScale with the PEEDI. - - Note that the system will appear to hang during boot if there - is nothing connected to read from the DCC. + their output to the serial port on MSM 8960 devices. endchoice diff --git a/trunk/arch/arm/boot/dts/kirkwood-dreamplug.dts b/trunk/arch/arm/boot/dts/kirkwood-dreamplug.dts deleted file mode 100644 index 8a5dff807b45..000000000000 --- a/trunk/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ /dev/null @@ -1,25 +0,0 @@ -/dts-v1/; - -/include/ "kirkwood.dtsi" - -/ { - model = "Globalscale Technologies Dreamplug"; - compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - }; - - serial@f1012000 { - compatible = "ns16550a"; - reg = <0xf1012000 0xff>; - reg-shift = <2>; - interrupts = <33>; - clock-frequency = <200000000>; - }; -}; diff --git a/trunk/arch/arm/boot/dts/kirkwood.dtsi b/trunk/arch/arm/boot/dts/kirkwood.dtsi deleted file mode 100644 index 771c6bbeb29a..000000000000 --- a/trunk/arch/arm/boot/dts/kirkwood.dtsi +++ /dev/null @@ -1,6 +0,0 @@ -/include/ "skeleton.dtsi" - -/ { - compatible = "marvell,kirkwood"; -}; - diff --git a/trunk/arch/arm/include/asm/system.h b/trunk/arch/arm/include/asm/system.h index 424aa458c487..e4c96cc6ec0c 100644 --- a/trunk/arch/arm/include/asm/system.h +++ b/trunk/arch/arm/include/asm/system.h @@ -110,7 +110,6 @@ extern void cpu_init(void); void soft_restart(unsigned long); extern void (*arm_pm_restart)(char str, const char *cmd); -extern void (*arm_pm_idle)(void); #define UDBG_UNDEFINED (1 << 0) #define UDBG_SYSCALL (1 << 1) diff --git a/trunk/arch/arm/kernel/process.c b/trunk/arch/arm/kernel/process.c index 008e7ce766a7..971d65c253a9 100644 --- a/trunk/arch/arm/kernel/process.c +++ b/trunk/arch/arm/kernel/process.c @@ -61,6 +61,8 @@ extern void setup_mm_for_reboot(void); static volatile int hlt_counter; +#include + void disable_hlt(void) { hlt_counter++; @@ -179,17 +181,13 @@ void cpu_idle_wait(void) EXPORT_SYMBOL_GPL(cpu_idle_wait); /* - * This is our default idle handler. + * This is our default idle handler. We need to disable + * interrupts here to ensure we don't miss a wakeup call. */ - -void (*arm_pm_idle)(void); - static void default_idle(void) { - if (arm_pm_idle) - arm_pm_idle(); - else - cpu_do_idle(); + if (!need_resched()) + arch_idle(); local_irq_enable(); } @@ -217,10 +215,6 @@ void cpu_idle(void) cpu_die(); #endif - /* - * We need to disable interrupts here - * to ensure we don't miss a wakeup call. - */ local_irq_disable(); #ifdef CONFIG_PL310_ERRATA_769419 wmb(); @@ -228,18 +222,19 @@ void cpu_idle(void) if (hlt_counter) { local_irq_enable(); cpu_relax(); - } else if (!need_resched()) { + } else { stop_critical_timings(); if (cpuidle_idle_call()) pm_idle(); start_critical_timings(); /* - * pm_idle functions must always - * return with IRQs enabled. + * This will eventually be removed - pm_idle + * functions should always return with IRQs + * enabled. */ WARN_ON(irqs_disabled()); - } else local_irq_enable(); + } } leds_event(led_idle_end); rcu_idle_exit(); diff --git a/trunk/arch/arm/mach-at91/at91cap9.c b/trunk/arch/arm/mach-at91/at91cap9.c index 8967d75c2ea3..a42edc25a87e 100644 --- a/trunk/arch/arm/mach-at91/at91cap9.c +++ b/trunk/arch/arm/mach-at91/at91cap9.c @@ -14,7 +14,6 @@ #include -#include #include #include #include @@ -314,12 +313,6 @@ static struct at91_gpio_bank at91cap9_gpio[] __initdata = { } }; -static void at91cap9_idle(void) -{ - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); - cpu_do_idle(); -} - /* -------------------------------------------------------------------- * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ @@ -339,7 +332,6 @@ static void __init at91cap9_ioremap_registers(void) static void __init at91cap9_initialize(void) { - arm_pm_idle = at91cap9_idle; arm_pm_restart = at91sam9g45_restart; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); diff --git a/trunk/arch/arm/mach-at91/at91rm9200.c b/trunk/arch/arm/mach-at91/at91rm9200.c index dd6e2de13420..99c3174e24a2 100644 --- a/trunk/arch/arm/mach-at91/at91rm9200.c +++ b/trunk/arch/arm/mach-at91/at91rm9200.c @@ -289,15 +289,6 @@ static struct at91_gpio_bank at91rm9200_gpio[] __initdata = { } }; -static void at91rm9200_idle(void) -{ - /* - * Disable the processor clock. The processor will be automatically - * re-enabled by an interrupt or by a reset. - */ - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); -} - static void at91rm9200_restart(char mode, const char *cmd) { /* @@ -323,7 +314,6 @@ static void __init at91rm9200_ioremap_registers(void) static void __init at91rm9200_initialize(void) { - arm_pm_idle = at91rm9200_idle; arm_pm_restart = at91rm9200_restart; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) diff --git a/trunk/arch/arm/mach-at91/at91sam9260.c b/trunk/arch/arm/mach-at91/at91sam9260.c index 9ac8c6fe3363..d4036ba43612 100644 --- a/trunk/arch/arm/mach-at91/at91sam9260.c +++ b/trunk/arch/arm/mach-at91/at91sam9260.c @@ -12,7 +12,6 @@ #include -#include #include #include #include @@ -329,15 +328,8 @@ static void __init at91sam9260_ioremap_registers(void) at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); } -static void at91sam9260_idle(void) -{ - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); - cpu_do_idle(); -} - static void __init at91sam9260_initialize(void) { - arm_pm_idle = at91sam9260_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) | (1 << AT91SAM9260_ID_IRQ2); diff --git a/trunk/arch/arm/mach-at91/at91sam9261.c b/trunk/arch/arm/mach-at91/at91sam9261.c index ab76868f01f5..023c2ff138df 100644 --- a/trunk/arch/arm/mach-at91/at91sam9261.c +++ b/trunk/arch/arm/mach-at91/at91sam9261.c @@ -12,7 +12,6 @@ #include -#include #include #include #include @@ -287,15 +286,8 @@ static void __init at91sam9261_ioremap_registers(void) at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); } -static void at91sam9261_idle(void) -{ - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); - cpu_do_idle(); -} - static void __init at91sam9261_initialize(void) { - arm_pm_idle = at91sam9261_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) | (1 << AT91SAM9261_ID_IRQ2); diff --git a/trunk/arch/arm/mach-at91/at91sam9263.c b/trunk/arch/arm/mach-at91/at91sam9263.c index 247ab633abcc..75e876c258af 100644 --- a/trunk/arch/arm/mach-at91/at91sam9263.c +++ b/trunk/arch/arm/mach-at91/at91sam9263.c @@ -12,7 +12,6 @@ #include -#include #include #include #include @@ -308,15 +307,8 @@ static void __init at91sam9263_ioremap_registers(void) at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1); } -static void at91sam9263_idle(void) -{ - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); - cpu_do_idle(); -} - static void __init at91sam9263_initialize(void) { - arm_pm_idle = at91sam9263_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); diff --git a/trunk/arch/arm/mach-at91/at91sam9g45.c b/trunk/arch/arm/mach-at91/at91sam9g45.c index 5b12192e52ec..1cb6a96b1c1e 100644 --- a/trunk/arch/arm/mach-at91/at91sam9g45.c +++ b/trunk/arch/arm/mach-at91/at91sam9g45.c @@ -317,12 +317,6 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = { } }; -static void at91sam9g45_idle(void) -{ - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); - cpu_do_idle(); -} - /* -------------------------------------------------------------------- * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ @@ -343,7 +337,6 @@ static void __init at91sam9g45_ioremap_registers(void) static void __init at91sam9g45_initialize(void) { - arm_pm_idle = at91sam9g45_idle; arm_pm_restart = at91sam9g45_restart; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); diff --git a/trunk/arch/arm/mach-at91/at91sam9rl.c b/trunk/arch/arm/mach-at91/at91sam9rl.c index fd60e226a987..d2c91a841cb8 100644 --- a/trunk/arch/arm/mach-at91/at91sam9rl.c +++ b/trunk/arch/arm/mach-at91/at91sam9rl.c @@ -11,7 +11,6 @@ #include -#include #include #include #include @@ -292,15 +291,8 @@ static void __init at91sam9rl_ioremap_registers(void) at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); } -static void at91sam9rl_idle(void) -{ - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); - cpu_do_idle(); -} - static void __init at91sam9rl_initialize(void) { - arm_pm_idle = at91sam9rl_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); diff --git a/trunk/arch/arm/mach-at91/at91x40.c b/trunk/arch/arm/mach-at91/at91x40.c index 0154b7f44ff1..56ba3bd035ae 100644 --- a/trunk/arch/arm/mach-at91/at91x40.c +++ b/trunk/arch/arm/mach-at91/at91x40.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -38,19 +37,8 @@ unsigned long clk_get_rate(struct clk *clk) return AT91X40_MASTER_CLOCK; } -static void at91x40_idle(void) -{ - /* - * Disable the processor clock. The processor will be automatically - * re-enabled by an interrupt or by a reset. - */ - at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU); - cpu_do_idle(); -} - void __init at91x40_initialize(unsigned long main_clock) { - arm_pm_idle = at91x40_idle; at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) | (1 << AT91X40_ID_IRQ2); } diff --git a/trunk/arch/arm/mach-at91/include/mach/system.h b/trunk/arch/arm/mach-at91/include/mach/system.h new file mode 100644 index 000000000000..cbd64f3bcecd --- /dev/null +++ b/trunk/arch/arm/mach-at91/include/mach/system.h @@ -0,0 +1,50 @@ +/* + * arch/arm/mach-at91/include/mach/system.h + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include +#include +#include +#include + +static inline void arch_idle(void) +{ + /* + * Disable the processor clock. The processor will be automatically + * re-enabled by an interrupt or by a reset. + */ +#ifdef AT91_PS + at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU); +#else + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); +#endif +#ifndef CONFIG_CPU_ARM920T + /* + * Set the processor (CP15) into 'Wait for Interrupt' mode. + * Post-RM9200 processors need this in conjunction with the above + * to save power when idle. + */ + cpu_do_idle(); +#endif +} + +#endif diff --git a/trunk/arch/arm/mach-bcmring/core.c b/trunk/arch/arm/mach-bcmring/core.c index 22e4e0a28ad1..6b67b7e8426c 100644 --- a/trunk/arch/arm/mach-bcmring/core.c +++ b/trunk/arch/arm/mach-bcmring/core.c @@ -52,8 +52,27 @@ #include #include -static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL); -static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL); +#define AMBA_DEVICE(name, initname, base, plat, size) \ +static struct amba_device name##_device = { \ + .dev = { \ + .coherent_dma_mask = ~0, \ + .init_name = initname, \ + .platform_data = plat \ + }, \ + .res = { \ + .start = MM_ADDR_IO_##base, \ + .end = MM_ADDR_IO_##base + (size) - 1, \ + .flags = IORESOURCE_MEM \ + }, \ + .dma_mask = ~0, \ + .irq = { \ + IRQ_##base \ + } \ +} + + +AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K); +AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K); static struct clk pll1_clk = { .name = "PLL1", diff --git a/trunk/arch/arm/mach-bcmring/include/mach/system.h b/trunk/arch/arm/mach-bcmring/include/mach/system.h new file mode 100644 index 000000000000..cb78250db649 --- /dev/null +++ b/trunk/arch/arm/mach-bcmring/include/mach/system.h @@ -0,0 +1,28 @@ +/* + * + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-clps711x/common.c b/trunk/arch/arm/mach-clps711x/common.c index 8736c1acc166..ab1711b9b4d6 100644 --- a/trunk/arch/arm/mach-clps711x/common.c +++ b/trunk/arch/arm/mach-clps711x/common.c @@ -225,19 +225,3 @@ void clps711x_restart(char mode, const char *cmd) { soft_restart(0); } - -static void clps711x_idle(void) -{ - clps_writel(1, HALT); - __asm__ __volatile__( - "mov r0, r0\n\ - mov r0, r0"); -} - -static int __init clps711x_idle_init(void) -{ - arm_pm_idle = clps711x_idle; - return 0; -} - -arch_initcall(clps711x_idle_init); diff --git a/trunk/arch/arm/mach-clps711x/include/mach/system.h b/trunk/arch/arm/mach-clps711x/include/mach/system.h new file mode 100644 index 000000000000..23d6ef8c84da --- /dev/null +++ b/trunk/arch/arm/mach-clps711x/include/mach/system.h @@ -0,0 +1,35 @@ +/* + * arch/arm/mach-clps711x/include/mach/system.h + * + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include +#include +#include + +static inline void arch_idle(void) +{ + clps_writel(1, HALT); + __asm__ __volatile__( + "mov r0, r0\n\ + mov r0, r0"); +} + +#endif diff --git a/trunk/arch/arm/mach-cns3xxx/include/mach/system.h b/trunk/arch/arm/mach-cns3xxx/include/mach/system.h new file mode 100644 index 000000000000..9e56b7dc133a --- /dev/null +++ b/trunk/arch/arm/mach-cns3xxx/include/mach/system.h @@ -0,0 +1,25 @@ +/* + * Copyright 2000 Deep Blue Solutions Ltd + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_SYSTEM_H +#define __MACH_SYSTEM_H + +#include + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-davinci/include/mach/system.h b/trunk/arch/arm/mach-davinci/include/mach/system.h new file mode 100644 index 000000000000..fcb7a015aba5 --- /dev/null +++ b/trunk/arch/arm/mach-davinci/include/mach/system.h @@ -0,0 +1,21 @@ +/* + * DaVinci system defines + * + * Author: Kevin Hilman, MontaVista Software, Inc. + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/trunk/arch/arm/mach-dove/include/mach/system.h b/trunk/arch/arm/mach-dove/include/mach/system.h new file mode 100644 index 000000000000..3027954f6162 --- /dev/null +++ b/trunk/arch/arm/mach-dove/include/mach/system.h @@ -0,0 +1,17 @@ +/* + * arch/arm/mach-dove/include/mach/system.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-ebsa110/core.c b/trunk/arch/arm/mach-ebsa110/core.c index 804c9122b7b3..294aad07f7a0 100644 --- a/trunk/arch/arm/mach-ebsa110/core.c +++ b/trunk/arch/arm/mach-ebsa110/core.c @@ -271,33 +271,8 @@ static struct platform_device *ebsa110_devices[] = { &am79c961_device, }; -/* - * EBSA110 idling methodology: - * - * We can not execute the "wait for interrupt" instruction since that - * will stop our MCLK signal (which provides the clock for the glue - * logic, and therefore the timer interrupt). - * - * Instead, we spin, polling the IRQ_STAT register for the occurrence - * of any interrupt with core clock down to the memory clock. - */ -static void ebsa110_idle(void) -{ - const char *irq_stat = (char *)0xff000000; - - /* disable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); - - /* wait for an interrupt to occur */ - while (!*irq_stat); - - /* enable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); -} - static int __init ebsa110_init(void) { - arm_pm_idle = ebsa110_idle; return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices)); } diff --git a/trunk/arch/arm/mach-ebsa110/include/mach/system.h b/trunk/arch/arm/mach-ebsa110/include/mach/system.h new file mode 100644 index 000000000000..2e4af65edb6f --- /dev/null +++ b/trunk/arch/arm/mach-ebsa110/include/mach/system.h @@ -0,0 +1,37 @@ +/* + * arch/arm/mach-ebsa110/include/mach/system.h + * + * Copyright (C) 1996-2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +/* + * EBSA110 idling methodology: + * + * We can not execute the "wait for interrupt" instruction since that + * will stop our MCLK signal (which provides the clock for the glue + * logic, and therefore the timer interrupt). + * + * Instead, we spin, polling the IRQ_STAT register for the occurrence + * of any interrupt with core clock down to the memory clock. + */ +static inline void arch_idle(void) +{ + const char *irq_stat = (char *)0xff000000; + + /* disable clock switching */ + asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); + + /* wait for an interrupt to occur */ + while (!*irq_stat); + + /* enable clock switching */ + asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); +} + +#endif diff --git a/trunk/arch/arm/mach-ep93xx/core.c b/trunk/arch/arm/mach-ep93xx/core.c index 903edb02fe4f..24203f9a6796 100644 --- a/trunk/arch/arm/mach-ep93xx/core.c +++ b/trunk/arch/arm/mach-ep93xx/core.c @@ -279,14 +279,48 @@ static struct amba_pl010_data ep93xx_uart_data = { .set_mctrl = ep93xx_uart_set_mctrl, }; -static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE, - { IRQ_EP93XX_UART1 }, &ep93xx_uart_data); +static struct amba_device uart1_device = { + .dev = { + .init_name = "apb:uart1", + .platform_data = &ep93xx_uart_data, + }, + .res = { + .start = EP93XX_UART1_PHYS_BASE, + .end = EP93XX_UART1_PHYS_BASE + 0x0fff, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_EP93XX_UART1, NO_IRQ }, + .periphid = 0x00041010, +}; + +static struct amba_device uart2_device = { + .dev = { + .init_name = "apb:uart2", + .platform_data = &ep93xx_uart_data, + }, + .res = { + .start = EP93XX_UART2_PHYS_BASE, + .end = EP93XX_UART2_PHYS_BASE + 0x0fff, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_EP93XX_UART2, NO_IRQ }, + .periphid = 0x00041010, +}; -static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE, - { IRQ_EP93XX_UART2 }, &ep93xx_uart_data); +static struct amba_device uart3_device = { + .dev = { + .init_name = "apb:uart3", + .platform_data = &ep93xx_uart_data, + }, + .res = { + .start = EP93XX_UART3_PHYS_BASE, + .end = EP93XX_UART3_PHYS_BASE + 0x0fff, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_EP93XX_UART3, NO_IRQ }, + .periphid = 0x00041010, +}; -static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE, - { IRQ_EP93XX_UART3 }, &ep93xx_uart_data); static struct resource ep93xx_rtc_resource[] = { { diff --git a/trunk/arch/arm/mach-ep93xx/include/mach/system.h b/trunk/arch/arm/mach-ep93xx/include/mach/system.h new file mode 100644 index 000000000000..b5bec7cb9b52 --- /dev/null +++ b/trunk/arch/arm/mach-ep93xx/include/mach/system.h @@ -0,0 +1,7 @@ +/* + * arch/arm/mach-ep93xx/include/mach/system.h + */ +static inline void arch_idle(void) +{ + cpu_do_idle(); +} diff --git a/trunk/arch/arm/mach-exynos/common.c b/trunk/arch/arm/mach-exynos/common.c index 031c1e5b3dfe..c59e18871006 100644 --- a/trunk/arch/arm/mach-exynos/common.c +++ b/trunk/arch/arm/mach-exynos/common.c @@ -201,6 +201,14 @@ static struct map_desc exynos4_iodesc1[] __initdata = { }, }; +static void exynos_idle(void) +{ + if (!need_resched()) + cpu_do_idle(); + + local_irq_enable(); +} + void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -459,6 +467,10 @@ early_initcall(exynos4_l2x0_cache_init); int __init exynos_init(void) { printk(KERN_INFO "EXYNOS: Initializing architecture\n"); + + /* set idle function */ + pm_idle = exynos_idle; + return device_register(&exynos4_dev); } diff --git a/trunk/arch/arm/mach-exynos/dma.c b/trunk/arch/arm/mach-exynos/dma.c index 91370def4a70..b10fcd270f07 100644 --- a/trunk/arch/arm/mach-exynos/dma.c +++ b/trunk/arch/arm/mach-exynos/dma.c @@ -74,8 +74,21 @@ struct dma_pl330_platdata exynos4_pdma0_pdata = { .peri_id = pdma0_peri, }; -AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, EXYNOS4_PA_PDMA0, - {IRQ_PDMA0}, &exynos4_pdma0_pdata); +struct amba_device exynos4_device_pdma0 = { + .dev = { + .init_name = "dma-pl330.0", + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &exynos4_pdma0_pdata, + }, + .res = { + .start = EXYNOS4_PA_PDMA0, + .end = EXYNOS4_PA_PDMA0 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA0, NO_IRQ}, + .periphid = 0x00041330, +}; u8 pdma1_peri[] = { DMACH_PCM0_RX, @@ -110,8 +123,21 @@ struct dma_pl330_platdata exynos4_pdma1_pdata = { .peri_id = pdma1_peri, }; -AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330, EXYNOS4_PA_PDMA1, - {IRQ_PDMA1}, &exynos4_pdma1_pdata); +struct amba_device exynos4_device_pdma1 = { + .dev = { + .init_name = "dma-pl330.1", + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &exynos4_pdma1_pdata, + }, + .res = { + .start = EXYNOS4_PA_PDMA1, + .end = EXYNOS4_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA1, NO_IRQ}, + .periphid = 0x00041330, +}; static int __init exynos4_dma_init(void) { @@ -120,11 +146,11 @@ static int __init exynos4_dma_init(void) dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask); - amba_device_register(&exynos4_pdma0_device, &iomem_resource); + amba_device_register(&exynos4_device_pdma0, &iomem_resource); dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask); - amba_device_register(&exynos4_pdma1_device, &iomem_resource); + amba_device_register(&exynos4_device_pdma1, &iomem_resource); return 0; } diff --git a/trunk/arch/arm/mach-exynos/include/mach/system.h b/trunk/arch/arm/mach-exynos/include/mach/system.h new file mode 100644 index 000000000000..0063a6de3dc8 --- /dev/null +++ b/trunk/arch/arm/mach-exynos/include/mach/system.h @@ -0,0 +1,20 @@ +/* linux/arch/arm/mach-exynos4/include/mach/system.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - system support header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +static void arch_idle(void) +{ + /* nothing here yet */ +} +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/trunk/arch/arm/mach-footbridge/include/mach/system.h b/trunk/arch/arm/mach-footbridge/include/mach/system.h new file mode 100644 index 000000000000..a174a5841bc2 --- /dev/null +++ b/trunk/arch/arm/mach-footbridge/include/mach/system.h @@ -0,0 +1,13 @@ +/* + * arch/arm/mach-footbridge/include/mach/system.h + * + * Copyright (C) 1996-1999 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +static inline void arch_idle(void) +{ + cpu_do_idle(); +} diff --git a/trunk/arch/arm/mach-gemini/Makefile b/trunk/arch/arm/mach-gemini/Makefile index 7355c0bbcb5e..c5b24b95a76e 100644 --- a/trunk/arch/arm/mach-gemini/Makefile +++ b/trunk/arch/arm/mach-gemini/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := irq.o mm.o time.o devices.o gpio.o idle.o +obj-y := irq.o mm.o time.o devices.o gpio.o # Board-specific support obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o diff --git a/trunk/arch/arm/mach-gemini/idle.c b/trunk/arch/arm/mach-gemini/idle.c deleted file mode 100644 index 92bbd6bb600a..000000000000 --- a/trunk/arch/arm/mach-gemini/idle.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * arch/arm/mach-gemini/idle.c - */ - -#include -#include -#include - -static void gemini_idle(void) -{ - /* - * Because of broken hardware we have to enable interrupts or the CPU - * will never wakeup... Acctualy it is not very good to enable - * interrupts first since scheduler can miss a tick, but there is - * no other way around this. Platforms that needs it for power saving - * should call enable_hlt() in init code, since by default it is - * disabled. - */ - local_irq_enable(); - cpu_do_idle(); -} - -static int __init gemini_idle_init(void) -{ - arm_pm_idle = gemini_idle; - return 0; -} - -arch_initcall(gemini_idle_init); diff --git a/trunk/arch/arm/mach-gemini/include/mach/system.h b/trunk/arch/arm/mach-gemini/include/mach/system.h index a33b5a1f8ab4..4d9c1f872472 100644 --- a/trunk/arch/arm/mach-gemini/include/mach/system.h +++ b/trunk/arch/arm/mach-gemini/include/mach/system.h @@ -14,6 +14,20 @@ #include #include +static inline void arch_idle(void) +{ + /* + * Because of broken hardware we have to enable interrupts or the CPU + * will never wakeup... Acctualy it is not very good to enable + * interrupts here since scheduler can miss a tick, but there is + * no other way around this. Platforms that needs it for power saving + * should call enable_hlt() in init code, since by default it is + * disabled. + */ + local_irq_enable(); + cpu_do_idle(); +} + static inline void arch_reset(char mode, const char *cmd) { __raw_writel(RESET_GLOBAL | RESET_CPU1, diff --git a/trunk/arch/arm/mach-gemini/irq.c b/trunk/arch/arm/mach-gemini/irq.c index ca70e5fcc7ac..9485a8fdf851 100644 --- a/trunk/arch/arm/mach-gemini/irq.c +++ b/trunk/arch/arm/mach-gemini/irq.c @@ -73,8 +73,8 @@ void __init gemini_init_irq(void) unsigned int i, mode = 0, level = 0; /* - * Disable the idle handler by default since it is buggy - * For more info see arch/arm/mach-gemini/idle.c + * Disable arch_idle() by default since it is buggy + * For more info see arch/arm/mach-gemini/include/mach/system.h */ disable_hlt(); diff --git a/trunk/arch/arm/mach-h720x/common.c b/trunk/arch/arm/mach-h720x/common.c index e756d1ac00c2..f8a2f6bb5483 100644 --- a/trunk/arch/arm/mach-h720x/common.c +++ b/trunk/arch/arm/mach-h720x/common.c @@ -247,21 +247,3 @@ void h720x_restart(char mode, const char *cmd) { CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET; } - -static void h720x__idle(void) -{ - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; - nop(); - nop(); - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; - nop(); - nop(); -} - -static int __init h720x_idle_init(void) -{ - arm_pm_idle = h720x__idle; - return 0; -} - -arch_initcall(h720x_idle_init); diff --git a/trunk/arch/arm/mach-h720x/include/mach/system.h b/trunk/arch/arm/mach-h720x/include/mach/system.h new file mode 100644 index 000000000000..16ac46e239aa --- /dev/null +++ b/trunk/arch/arm/mach-h720x/include/mach/system.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-h720x/include/mach/system.h + * + * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * arch/arm/mach-h720x/include/mach/system.h + * + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H +#include + +static void arch_idle(void) +{ + CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; + nop(); + nop(); + CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; + nop(); + nop(); +} + +#endif diff --git a/trunk/arch/arm/mach-highbank/include/mach/system.h b/trunk/arch/arm/mach-highbank/include/mach/system.h new file mode 100644 index 000000000000..b1d8b5fbe373 --- /dev/null +++ b/trunk/arch/arm/mach-highbank/include/mach/system.h @@ -0,0 +1,24 @@ +/* + * Copyright 2010-2011 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ +#ifndef __MACH_SYSTEM_H +#define __MACH_SYSTEM_H + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-imx/Kconfig b/trunk/arch/arm/mach-imx/Kconfig index a3125ac21425..4defb97bbfc8 100644 --- a/trunk/arch/arm/mach-imx/Kconfig +++ b/trunk/arch/arm/mach-imx/Kconfig @@ -320,10 +320,8 @@ config MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MX2_CAMERA - select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC - select LEDS_GPIO_REGISTER + select IMX_HAVE_PLATFORM_MXC_EHCI help Include support for Visstrim_m10 platform and its different variants. This includes specific configurations for the board and its diff --git a/trunk/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/trunk/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 0a1643c3f17d..c2766ae02b4f 100644 --- a/trunk/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/trunk/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -30,10 +30,6 @@ #include #include #include -#include -#include -#include -#include #include #include #include @@ -43,8 +39,6 @@ #include "devices-imx27.h" -#define TVP5150_RSTN (GPIO_PORTC + 18) -#define TVP5150_PWDN (GPIO_PORTC + 19) #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) #define SDHC1_IRQ IRQ_GPIOB(25) @@ -106,99 +100,8 @@ static const int visstrim_m10_pins[] __initconst = { PE1_PF_USBOTG_STP, PB23_PF_USB_PWR, PB24_PF_USB_OC, - /* CSI */ - PB10_PF_CSI_D0, - PB11_PF_CSI_D1, - PB12_PF_CSI_D2, - PB13_PF_CSI_D3, - PB14_PF_CSI_D4, - PB15_PF_CSI_MCLK, - PB16_PF_CSI_PIXCLK, - PB17_PF_CSI_D5, - PB18_PF_CSI_D6, - PB19_PF_CSI_D7, - PB20_PF_CSI_VSYNC, - PB21_PF_CSI_HSYNC, }; -/* Camera */ -static int visstrim_camera_power(struct device *dev, int on) -{ - gpio_set_value(TVP5150_PWDN, on); - - return 0; -}; - -static int visstrim_camera_reset(struct device *dev) -{ - gpio_set_value(TVP5150_RSTN, 0); - ndelay(500); - gpio_set_value(TVP5150_RSTN, 1); - - return 0; -}; - -static struct i2c_board_info visstrim_i2c_camera = { - I2C_BOARD_INFO("tvp5150", 0x5d), -}; - -static struct soc_camera_link iclink_tvp5150 = { - .bus_id = 0, - .board_info = &visstrim_i2c_camera, - .i2c_adapter_id = 0, - .power = visstrim_camera_power, - .reset = visstrim_camera_reset, -}; - -static struct mx2_camera_platform_data visstrim_camera = { - .flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE | - MX2_CAMERA_SWAP16 | MX2_CAMERA_PCLK_SAMPLE_RISING, - .clk = 100000, -}; - -static phys_addr_t mx2_camera_base __initdata; -#define MX2_CAMERA_BUF_SIZE SZ_8M - -static void __init visstrim_camera_init(void) -{ - struct platform_device *pdev; - int dma; - - /* Initialize tvp5150 gpios */ - mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT); - mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT); - gpio_set_value(TVP5150_RSTN, 1); - gpio_set_value(TVP5150_PWDN, 0); - ndelay(1); - - gpio_set_value(TVP5150_PWDN, 1); - ndelay(1); - gpio_set_value(TVP5150_RSTN, 0); - ndelay(500); - gpio_set_value(TVP5150_RSTN, 1); - ndelay(200000); - - pdev = imx27_add_mx2_camera(&visstrim_camera); - if (IS_ERR(pdev)) - return; - - dma = dma_declare_coherent_memory(&pdev->dev, - mx2_camera_base, mx2_camera_base, - MX2_CAMERA_BUF_SIZE, - DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); - if (!(dma & DMA_MEMORY_MAP)) - return; -} - -static void __init visstrim_reserve(void) -{ - /* reserve 4 MiB for mx2-camera */ - mx2_camera_base = memblock_alloc(MX2_CAMERA_BUF_SIZE, - MX2_CAMERA_BUF_SIZE); - memblock_free(mx2_camera_base, MX2_CAMERA_BUF_SIZE); - memblock_remove(mx2_camera_base, MX2_CAMERA_BUF_SIZE); -} - /* GPIOs used as events for applications */ static struct gpio_keys_button visstrim_gpio_keys[] = { { @@ -233,35 +136,6 @@ static const struct gpio_keys_platform_data .nbuttons = ARRAY_SIZE(visstrim_gpio_keys), }; -/* led */ -static const struct gpio_led visstrim_m10_leds[] __initconst = { - { - .name = "visstrim:ld0", - .default_trigger = "nand-disk", - .gpio = (GPIO_PORTC + 29), - }, - { - .name = "visstrim:ld1", - .default_trigger = "nand-disk", - .gpio = (GPIO_PORTC + 24), - }, - { - .name = "visstrim:ld2", - .default_trigger = "nand-disk", - .gpio = (GPIO_PORTC + 28), - }, - { - .name = "visstrim:ld3", - .default_trigger = "nand-disk", - .gpio = (GPIO_PORTC + 25), - }, -}; - -static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = { - .leds = visstrim_m10_leds, - .num_leds = ARRAY_SIZE(visstrim_m10_leds), -}; - /* Visstrim_SM10 has a microSD slot connected to sdhc1 */ static int visstrim_m10_sdhc1_init(struct device *dev, irq_handler_t detect_irq, void *data) @@ -342,9 +216,6 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { { I2C_BOARD_INFO("tlv320aic32x4", 0x18), .platform_data = &visstrim_m10_aic32x4_pdata, - }, - { - I2C_BOARD_INFO("m41t00", 0x68), } }; @@ -383,20 +254,15 @@ static void __init visstrim_m10_board_init(void) imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); - imx27_add_imx_i2c(0, &visstrim_m10_i2c_data); - imx27_add_imx_i2c(1, &visstrim_m10_i2c_data); i2c_register_board_info(0, visstrim_m10_i2c_devices, ARRAY_SIZE(visstrim_m10_i2c_devices)); - + imx27_add_imx_i2c(0, &visstrim_m10_i2c_data); + imx27_add_imx_i2c(1, &visstrim_m10_i2c_data); imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata); imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata); imx27_add_fec(NULL); imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, - &iclink_tvp5150, sizeof(iclink_tvp5150)); - gpio_led_register_device(0, &visstrim_m10_led_data); - visstrim_camera_init(); } static void __init visstrim_m10_timer_init(void) @@ -410,7 +276,6 @@ static struct sys_timer visstrim_m10_timer = { MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") .atag_offset = 0x100, - .reserve = visstrim_reserve, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/trunk/arch/arm/mach-imx/mach-mx31moboard.c b/trunk/arch/arm/mach-imx/mach-mx31moboard.c index f225262b5c38..ed0710b90d8a 100644 --- a/trunk/arch/arm/mach-imx/mach-mx31moboard.c +++ b/trunk/arch/arm/mach-imx/mach-mx31moboard.c @@ -590,7 +590,7 @@ static void __init mx31moboard_reserve(void) } MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") - /* Maintainer: Valentin Longchamp, EPFL Mobots group */ + /* Maintainer: Philippe Retornaz, EPFL Mobots group */ .atag_offset = 0x100, .reserve = mx31moboard_reserve, .map_io = mx31_map_io, diff --git a/trunk/arch/arm/mach-imx/mm-imx3.c b/trunk/arch/arm/mach-imx/mm-imx3.c index 8404ee72555a..31807d2a8b7b 100644 --- a/trunk/arch/arm/mach-imx/mm-imx3.c +++ b/trunk/arch/arm/mach-imx/mm-imx3.c @@ -34,29 +34,31 @@ static void imx3_idle(void) { unsigned long reg = 0; - __asm__ __volatile__( - /* disable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "bic %0, %0, #0x00001000\n" - "bic %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - /* invalidate I cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c5, 0\n" - /* clear and invalidate D cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c14, 0\n" - /* WFI */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c0, 4\n" - "nop\n" "nop\n" "nop\n" "nop\n" - "nop\n" "nop\n" "nop\n" - /* enable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "orr %0, %0, #0x00001000\n" - "orr %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - : "=r" (reg)); + if (!need_resched()) + __asm__ __volatile__( + /* disable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #0x00001000\n" + "bic %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + /* invalidate I cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c5, 0\n" + /* clear and invalidate D cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c14, 0\n" + /* WFI */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c0, 4\n" + "nop\n" "nop\n" "nop\n" "nop\n" + "nop\n" "nop\n" "nop\n" + /* enable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #0x00001000\n" + "orr %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + : "=r" (reg)); + local_irq_enable(); } static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, @@ -132,8 +134,8 @@ void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); + pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; - arm_pm_idle = imx3_idle; } void __init mx31_init_irq(void) @@ -195,7 +197,7 @@ void __init imx35_init_early(void) mxc_set_cpu_type(MXC_CPU_MX35); mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - arm_pm_idle = imx3_idle; + pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; } diff --git a/trunk/arch/arm/mach-imx/mm-imx5.c b/trunk/arch/arm/mach-imx/mm-imx5.c index 49549a72dc7d..bc17dfea3817 100644 --- a/trunk/arch/arm/mach-imx/mm-imx5.c +++ b/trunk/arch/arm/mach-imx/mm-imx5.c @@ -26,17 +26,23 @@ static struct clk *gpc_dvfs_clk; static void imx5_idle(void) { - /* gpc clock is needed for SRPG */ - if (gpc_dvfs_clk == NULL) { - gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); - if (IS_ERR(gpc_dvfs_clk)) - return; - } - clk_enable(gpc_dvfs_clk); - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - if (tzic_enable_wake() != 0) + if (!need_resched()) { + /* gpc clock is needed for SRPG */ + if (gpc_dvfs_clk == NULL) { + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + if (IS_ERR(gpc_dvfs_clk)) + goto err0; + } + clk_enable(gpc_dvfs_clk); + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + if (tzic_enable_wake()) + goto err1; cpu_do_idle(); - clk_disable(gpc_dvfs_clk); +err1: + clk_disable(gpc_dvfs_clk); + } +err0: + local_irq_enable(); } /* @@ -102,7 +108,7 @@ void __init imx51_init_early(void) mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); - arm_pm_idle = imx5_idle; + pm_idle = imx5_idle; } void __init imx53_init_early(void) diff --git a/trunk/arch/arm/mach-imx/pm-imx27.c b/trunk/arch/arm/mach-imx/pm-imx27.c index 6fcffa7db978..e455d2f855bf 100644 --- a/trunk/arch/arm/mach-imx/pm-imx27.c +++ b/trunk/arch/arm/mach-imx/pm-imx27.c @@ -10,6 +10,7 @@ #include #include #include +#include #include static int mx27_suspend_enter(suspend_state_t state) @@ -22,7 +23,7 @@ static int mx27_suspend_enter(suspend_state_t state) cscr &= 0xFFFFFFFC; __raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); /* Executes WFI */ - cpu_do_idle(); + arch_idle(); break; default: diff --git a/trunk/arch/arm/mach-integrator/core.c b/trunk/arch/arm/mach-integrator/core.c index 15b87f26ac96..019f0ab08f66 100644 --- a/trunk/arch/arm/mach-integrator/core.c +++ b/trunk/arch/arm/mach-integrator/core.c @@ -35,23 +35,67 @@ static struct amba_pl010_data integrator_uart_data; -#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT } -#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 } -#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 } -#define KMI0_IRQ { IRQ_KMIINT0 } -#define KMI1_IRQ { IRQ_KMIINT1 } +static struct amba_device rtc_device = { + .dev = { + .init_name = "mb:15", + }, + .res = { + .start = INTEGRATOR_RTC_BASE, + .end = INTEGRATOR_RTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_RTCINT, NO_IRQ }, +}; -static AMBA_APB_DEVICE(rtc, "mb:15", 0, - INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL); +static struct amba_device uart0_device = { + .dev = { + .init_name = "mb:16", + .platform_data = &integrator_uart_data, + }, + .res = { + .start = INTEGRATOR_UART0_BASE, + .end = INTEGRATOR_UART0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_UARTINT0, NO_IRQ }, +}; -static AMBA_APB_DEVICE(uart0, "mb:16", 0, - INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data); +static struct amba_device uart1_device = { + .dev = { + .init_name = "mb:17", + .platform_data = &integrator_uart_data, + }, + .res = { + .start = INTEGRATOR_UART1_BASE, + .end = INTEGRATOR_UART1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_UARTINT1, NO_IRQ }, +}; -static AMBA_APB_DEVICE(uart1, "mb:17", 0, - INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data); +static struct amba_device kmi0_device = { + .dev = { + .init_name = "mb:18", + }, + .res = { + .start = KMI0_BASE, + .end = KMI0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_KMIINT0, NO_IRQ }, +}; -static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL); -static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL); +static struct amba_device kmi1_device = { + .dev = { + .init_name = "mb:19", + }, + .res = { + .start = KMI1_BASE, + .end = KMI1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_KMIINT1, NO_IRQ }, +}; static struct amba_device *amba_devs[] __initdata = { &rtc_device, diff --git a/trunk/arch/arm/mach-integrator/impd1.c b/trunk/arch/arm/mach-integrator/impd1.c index 3e538da6cb1f..8cbb75a96bd4 100644 --- a/trunk/arch/arm/mach-integrator/impd1.c +++ b/trunk/arch/arm/mach-integrator/impd1.c @@ -401,21 +401,24 @@ static int impd1_probe(struct lm_device *dev) pc_base = dev->resource.start + idev->offset; - d = amba_device_alloc(NULL, pc_base, SZ_4K); + d = kzalloc(sizeof(struct amba_device), GFP_KERNEL); if (!d) continue; dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12); d->dev.parent = &dev->dev; + d->res.start = dev->resource.start + idev->offset; + d->res.end = d->res.start + SZ_4K - 1; + d->res.flags = IORESOURCE_MEM; d->irq[0] = dev->irq; d->irq[1] = dev->irq; d->periphid = idev->id; d->dev.platform_data = idev->platform_data; - ret = amba_device_add(d, &dev->resource); + ret = amba_device_register(d, &dev->resource); if (ret) { dev_err(&d->dev, "unable to register device: %d\n", ret); - amba_device_put(d); + kfree(d); } } diff --git a/trunk/arch/arm/mach-integrator/include/mach/system.h b/trunk/arch/arm/mach-integrator/include/mach/system.h new file mode 100644 index 000000000000..901514eba4a6 --- /dev/null +++ b/trunk/arch/arm/mach-integrator/include/mach/system.h @@ -0,0 +1,33 @@ +/* + * arch/arm/mach-integrator/include/mach/system.h + * + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-integrator/integrator_cp.c b/trunk/arch/arm/mach-integrator/integrator_cp.c index be9ead4a3bcc..a8b6aa6003f3 100644 --- a/trunk/arch/arm/mach-integrator/integrator_cp.c +++ b/trunk/arch/arm/mach-integrator/integrator_cp.c @@ -347,14 +347,32 @@ static struct mmci_platform_data mmc_data = { .gpio_cd = -1, }; -#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 } -#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT } - -static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE, - INTEGRATOR_CP_MMC_IRQS, &mmc_data); +static struct amba_device mmc_device = { + .dev = { + .init_name = "mb:1c", + .platform_data = &mmc_data, + }, + .res = { + .start = INTEGRATOR_CP_MMC_BASE, + .end = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }, + .periphid = 0, +}; -static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE, - INTEGRATOR_CP_AACI_IRQS, NULL); +static struct amba_device aaci_device = { + .dev = { + .init_name = "mb:1d", + }, + .res = { + .start = INTEGRATOR_CP_AACI_BASE, + .end = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_CP_AACIINT, NO_IRQ }, + .periphid = 0, +}; /* @@ -407,8 +425,21 @@ static struct clcd_board clcd_data = { .remove = versatile_clcd_remove_dma, }; -static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE, - { IRQ_CP_CLCDCINT }, &clcd_data); +static struct amba_device clcd_device = { + .dev = { + .init_name = "mb:c0", + .coherent_dma_mask = ~0, + .platform_data = &clcd_data, + }, + .res = { + .start = INTCP_PA_CLCD_BASE, + .end = INTCP_PA_CLCD_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .dma_mask = ~0, + .irq = { IRQ_CP_CLCDCINT, NO_IRQ }, + .periphid = 0, +}; static struct amba_device *amba_devs[] __initdata = { &mmc_device, diff --git a/trunk/arch/arm/mach-iop13xx/include/mach/system.h b/trunk/arch/arm/mach-iop13xx/include/mach/system.h new file mode 100644 index 000000000000..1f31ed3f8ae2 --- /dev/null +++ b/trunk/arch/arm/mach-iop13xx/include/mach/system.h @@ -0,0 +1,13 @@ +/* + * arch/arm/mach-iop13xx/include/mach/system.h + * + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +static inline void arch_idle(void) +{ + cpu_do_idle(); +} diff --git a/trunk/arch/arm/mach-iop32x/include/mach/system.h b/trunk/arch/arm/mach-iop32x/include/mach/system.h new file mode 100644 index 000000000000..4a88727bca98 --- /dev/null +++ b/trunk/arch/arm/mach-iop32x/include/mach/system.h @@ -0,0 +1,13 @@ +/* + * arch/arm/mach-iop32x/include/mach/system.h + * + * Copyright (C) 2001 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +static inline void arch_idle(void) +{ + cpu_do_idle(); +} diff --git a/trunk/arch/arm/mach-iop33x/include/mach/system.h b/trunk/arch/arm/mach-iop33x/include/mach/system.h new file mode 100644 index 000000000000..4f98e765397c --- /dev/null +++ b/trunk/arch/arm/mach-iop33x/include/mach/system.h @@ -0,0 +1,13 @@ +/* + * arch/arm/mach-iop33x/include/mach/system.h + * + * Copyright (C) 2001 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +static inline void arch_idle(void) +{ + cpu_do_idle(); +} diff --git a/trunk/arch/arm/mach-ixp2000/include/mach/system.h b/trunk/arch/arm/mach-ixp2000/include/mach/system.h new file mode 100644 index 000000000000..a7fb08b2b8e7 --- /dev/null +++ b/trunk/arch/arm/mach-ixp2000/include/mach/system.h @@ -0,0 +1,14 @@ +/* + * arch/arm/mach-ixp2000/include/mach/system.h + * + * Copyright (C) 2002 Intel Corp. + * Copyricht (C) 2003-2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +static inline void arch_idle(void) +{ + cpu_do_idle(); +} diff --git a/trunk/arch/arm/mach-ixp23xx/core.c b/trunk/arch/arm/mach-ixp23xx/core.c index 7c1495e4fe7a..0923bb905cc0 100644 --- a/trunk/arch/arm/mach-ixp23xx/core.c +++ b/trunk/arch/arm/mach-ixp23xx/core.c @@ -441,9 +441,6 @@ static struct platform_device *ixp23xx_devices[] __initdata = { void __init ixp23xx_sys_init(void) { - /* by default, the idle code is disabled */ - disable_hlt(); - *IXP23XX_EXP_UNIT_FUSE |= 0xf; platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices)); } diff --git a/trunk/arch/arm/mach-ixp23xx/include/mach/system.h b/trunk/arch/arm/mach-ixp23xx/include/mach/system.h new file mode 100644 index 000000000000..277dda7334b9 --- /dev/null +++ b/trunk/arch/arm/mach-ixp23xx/include/mach/system.h @@ -0,0 +1,16 @@ +/* + * arch/arm/mach-ixp23xx/include/mach/system.h + * + * Copyright (C) 2003 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +static inline void arch_idle(void) +{ +#if 0 + if (!hlt_counter) + cpu_do_idle(); +#endif +} diff --git a/trunk/arch/arm/mach-ixp4xx/common.c b/trunk/arch/arm/mach-ixp4xx/common.c index a6329a0a8ec4..3841ab4146ba 100644 --- a/trunk/arch/arm/mach-ixp4xx/common.c +++ b/trunk/arch/arm/mach-ixp4xx/common.c @@ -236,12 +236,6 @@ void __init ixp4xx_init_irq(void) { int i = 0; - /* - * ixp4xx does not implement the XScale PWRMODE register - * so it must not call cpu_do_idle(). - */ - disable_hlt(); - /* Route all sources to IRQ instead of FIQ */ *IXP4XX_ICLR = 0x0; diff --git a/trunk/arch/arm/mach-ixp4xx/include/mach/system.h b/trunk/arch/arm/mach-ixp4xx/include/mach/system.h new file mode 100644 index 000000000000..140a9bef4466 --- /dev/null +++ b/trunk/arch/arm/mach-ixp4xx/include/mach/system.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/system.h + * + * Copyright (C) 2002 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +static inline void arch_idle(void) +{ + /* ixp4xx does not implement the XScale PWRMODE register, + * so it must not call cpu_do_idle() here. + */ +#if 0 + cpu_do_idle(); +#endif +} diff --git a/trunk/arch/arm/mach-kirkwood/Kconfig b/trunk/arch/arm/mach-kirkwood/Kconfig index 90ceab761929..7fc603b46891 100644 --- a/trunk/arch/arm/mach-kirkwood/Kconfig +++ b/trunk/arch/arm/mach-kirkwood/Kconfig @@ -44,20 +44,6 @@ config MACH_GURUPLUG Say 'Y' here if you want your kernel to support the Marvell GuruPlug Reference Board. -config ARCH_KIRKWOOD_DT - bool "Marvell Kirkwood Flattened Device Tree" - select USE_OF - help - Say 'Y' here if you want your kernel to support the - Marvell Kirkwood using flattened device tree. - -config MACH_DREAMPLUG_DT - bool "Marvell DreamPlug (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Marvell DreamPlug (Flattened Device Tree). - config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/trunk/arch/arm/mach-kirkwood/Makefile b/trunk/arch/arm/mach-kirkwood/Makefile index acbc5e1db06f..5dcaa81a2ec3 100644 --- a/trunk/arch/arm/mach-kirkwood/Makefile +++ b/trunk/arch/arm/mach-kirkwood/Makefile @@ -20,4 +20,3 @@ obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o -obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o diff --git a/trunk/arch/arm/mach-kirkwood/Makefile.boot b/trunk/arch/arm/mach-kirkwood/Makefile.boot index 16f938522304..760a0efe7580 100644 --- a/trunk/arch/arm/mach-kirkwood/Makefile.boot +++ b/trunk/arch/arm/mach-kirkwood/Makefile.boot @@ -1,5 +1,3 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 - -dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb diff --git a/trunk/arch/arm/mach-kirkwood/board-dt.c b/trunk/arch/arm/mach-kirkwood/board-dt.c deleted file mode 100644 index fbe6405602ed..000000000000 --- a/trunk/arch/arm/mach-kirkwood/board-dt.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * Copyright 2012 (C), Jason Cooper - * - * arch/arm/mach-kirkwood/board-dt.c - * - * Marvell DreamPlug Reference Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" -#include "mpp.h" - -static struct of_device_id kirkwood_dt_match_table[] __initdata = { - { .compatible = "simple-bus", }, - { } -}; - -struct mtd_partition dreamplug_partitions[] = { - { - .name = "u-boot", - .size = SZ_512K, - .offset = 0, - }, - { - .name = "u-boot env", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K, - }, - { - .name = "dtb", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K + SZ_512K, - }, -}; - -static const struct flash_platform_data dreamplug_spi_slave_data = { - .type = "mx25l1606e", - .name = "spi_flash", - .parts = dreamplug_partitions, - .nr_parts = ARRAY_SIZE(dreamplug_partitions), -}; - -static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &dreamplug_spi_slave_data, - .irq = -1, - .max_speed_hz = 50000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct mv643xx_eth_platform_data dreamplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data dreamplug_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -static struct mv_sata_platform_data dreamplug_sata_data = { - .n_ports = 1, -}; - -static struct mvsdio_platform_data dreamplug_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ -}; - -static struct gpio_led dreamplug_led_pins[] = { - { - .name = "dreamplug:blue:bluetooth", - .gpio = 47, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi", - .gpio = 48, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi_ap", - .gpio = 49, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dreamplug_led_data = { - .leds = dreamplug_led_pins, - .num_leds = ARRAY_SIZE(dreamplug_led_pins), -}; - -static struct platform_device dreamplug_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dreamplug_led_data, - } -}; - -static unsigned int dreamplug_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP47_GPIO, /* Bluetooth LED */ - MPP48_GPIO, /* Wifi LED */ - MPP49_GPIO, /* Wifi AP LED */ - 0 -}; - -static void __init dreamplug_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_mpp_conf(dreamplug_mpp_config); - - spi_register_board_info(dreamplug_spi_slave_info, - ARRAY_SIZE(dreamplug_spi_slave_info)); - kirkwood_spi_init(); - - kirkwood_ehci_init(); - kirkwood_ge00_init(&dreamplug_ge00_data); - kirkwood_ge01_init(&dreamplug_ge01_data); - kirkwood_sata_init(&dreamplug_sata_data); - kirkwood_sdio_init(&dreamplug_mvsdio_data); - - platform_device_register(&dreamplug_leds); -} - -static void __init kirkwood_dt_init(void) -{ - kirkwood_init(); - - if (of_machine_is_compatible("globalscale,dreamplug")) - dreamplug_init(); - - of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL); -} - -static const char *kirkwood_dt_board_compat[] = { - "globalscale,dreamplug", - NULL -}; - -DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") - /* Maintainer: Jason Cooper */ - .map_io = kirkwood_map_io, - .init_early = kirkwood_init_early, - .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, - .init_machine = kirkwood_dt_init, - .restart = kirkwood_restart, - .dt_compat = kirkwood_dt_board_compat, -MACHINE_END diff --git a/trunk/arch/arm/mach-kirkwood/include/mach/system.h b/trunk/arch/arm/mach-kirkwood/include/mach/system.h new file mode 100644 index 000000000000..5fddde002b5e --- /dev/null +++ b/trunk/arch/arm/mach-kirkwood/include/mach/system.h @@ -0,0 +1,17 @@ +/* + * arch/arm/mach-kirkwood/include/mach/system.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-ks8695/include/mach/system.h b/trunk/arch/arm/mach-ks8695/include/mach/system.h new file mode 100644 index 000000000000..59fe992395bf --- /dev/null +++ b/trunk/arch/arm/mach-ks8695/include/mach/system.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-s3c2410/include/mach/system.h + * + * Copyright (C) 2006 Simtec Electronics + * Ben Dooks + * + * KS8695 - System function defines and includes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks, + */ + cpu_do_idle(); + +} + +#endif diff --git a/trunk/arch/arm/mach-lpc32xx/include/mach/system.h b/trunk/arch/arm/mach-lpc32xx/include/mach/system.h new file mode 100644 index 000000000000..bf176c991520 --- /dev/null +++ b/trunk/arch/arm/mach-lpc32xx/include/mach/system.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-lpc32xx/include/mach/system.h + * + * Author: Kevin Wells + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-lpc32xx/phy3250.c b/trunk/arch/arm/mach-lpc32xx/phy3250.c index 5d51c102c255..bfee5b455105 100644 --- a/trunk/arch/arm/mach-lpc32xx/phy3250.c +++ b/trunk/arch/arm/mach-lpc32xx/phy3250.c @@ -149,8 +149,20 @@ static struct clcd_board lpc32xx_clcd_data = { .remove = lpc32xx_clcd_remove, }; -static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0, - LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data); +static struct amba_device lpc32xx_clcd_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "dev:clcd", + .platform_data = &lpc32xx_clcd_data, + }, + .res = { + .start = LPC32XX_LCD_BASE, + .end = (LPC32XX_LCD_BASE + SZ_4K - 1), + .flags = IORESOURCE_MEM, + }, + .dma_mask = ~0, + .irq = {IRQ_LPC32XX_LCD, NO_IRQ}, +}; /* * AMBA SSP (SPI) @@ -179,8 +191,20 @@ static struct pl022_ssp_controller lpc32xx_ssp0_data = { .enable_dma = 0, }; -static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0, - LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data); +static struct amba_device lpc32xx_ssp0_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "dev:ssp0", + .platform_data = &lpc32xx_ssp0_data, + }, + .res = { + .start = LPC32XX_SSP0_BASE, + .end = (LPC32XX_SSP0_BASE + SZ_4K - 1), + .flags = IORESOURCE_MEM, + }, + .dma_mask = ~0, + .irq = {IRQ_LPC32XX_SSP0, NO_IRQ}, +}; /* AT25 driver registration */ static int __init phy3250_spi_board_register(void) diff --git a/trunk/arch/arm/mach-mmp/include/mach/system.h b/trunk/arch/arm/mach-mmp/include/mach/system.h new file mode 100644 index 000000000000..1d001eab81e1 --- /dev/null +++ b/trunk/arch/arm/mach-mmp/include/mach/system.h @@ -0,0 +1,16 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/system.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_SYSTEM_H +#define __ASM_MACH_SYSTEM_H + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} +#endif /* __ASM_MACH_SYSTEM_H */ diff --git a/trunk/arch/arm/mach-mmp/mmp2.c b/trunk/arch/arm/mach-mmp/mmp2.c index c709a24a9d25..617c60a170a4 100644 --- a/trunk/arch/arm/mach-mmp/mmp2.c +++ b/trunk/arch/arm/mach-mmp/mmp2.c @@ -223,7 +223,6 @@ struct resource mmp2_resource_gpio[] = { }, { .start = IRQ_MMP2_GPIO, .end = IRQ_MMP2_GPIO, - .name = "gpio_mux", .flags = IORESOURCE_IRQ, }, }; diff --git a/trunk/arch/arm/mach-mmp/pxa168.c b/trunk/arch/arm/mach-mmp/pxa168.c index 9f612565b140..7bc17eaa12eb 100644 --- a/trunk/arch/arm/mach-mmp/pxa168.c +++ b/trunk/arch/arm/mach-mmp/pxa168.c @@ -167,7 +167,6 @@ struct resource pxa168_resource_gpio[] = { }, { .start = IRQ_PXA168_GPIOX, .end = IRQ_PXA168_GPIOX, - .name = "gpio_mux", .flags = IORESOURCE_IRQ, }, }; diff --git a/trunk/arch/arm/mach-mmp/pxa910.c b/trunk/arch/arm/mach-mmp/pxa910.c index 0c87e69adf9f..3241a25784d0 100644 --- a/trunk/arch/arm/mach-mmp/pxa910.c +++ b/trunk/arch/arm/mach-mmp/pxa910.c @@ -173,7 +173,6 @@ struct resource pxa910_resource_gpio[] = { }, { .start = IRQ_PXA910_AP_GPIO, .end = IRQ_PXA910_AP_GPIO, - .name = "gpio_mux", .flags = IORESOURCE_IRQ, }, }; diff --git a/trunk/arch/arm/mach-msm/idle.S b/trunk/arch/arm/mach-msm/idle.S new file mode 100644 index 000000000000..6a94f0527137 --- /dev/null +++ b/trunk/arch/arm/mach-msm/idle.S @@ -0,0 +1,36 @@ +/* arch/arm/mach-msm/include/mach/idle.S + * + * Idle processing for MSM7K - work around bugs with SWFI. + * + * Copyright (c) 2007 QUALCOMM Incorporated. + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include + +ENTRY(arch_idle) +#ifdef CONFIG_MSM7X00A_IDLE + mrc p15, 0, r1, c1, c0, 0 /* read current CR */ + bic r0, r1, #(1 << 2) /* clear dcache bit */ + bic r0, r0, #(1 << 12) /* clear icache bit */ + mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ + + mov r0, #0 /* prepare wfi value */ + mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ + mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ + mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ + + mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ +#endif + mov pc, lr diff --git a/trunk/arch/arm/mach-msm/idle.c b/trunk/arch/arm/mach-msm/idle.c deleted file mode 100644 index 0c9e13c65743..000000000000 --- a/trunk/arch/arm/mach-msm/idle.c +++ /dev/null @@ -1,49 +0,0 @@ -/* arch/arm/mach-msm/idle.c - * - * Idle processing for MSM7K - work around bugs with SWFI. - * - * Copyright (c) 2007 QUALCOMM Incorporated. - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include - -static void msm_idle(void) -{ -#ifdef CONFIG_MSM7X00A_IDLE - asm volatile ( - - "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t" - "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t" - "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t" - "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t" - - "mov r0, #0 /* prepare wfi value */ \n\t" - "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t" - "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t" - "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t" - - "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t" - - : : : "r0","r1" ); -#endif -} - -static int __init msm_idle_init(void) -{ - arm_pm_idle = msm_idle; - return 0; -} - -arch_initcall(msm_idle_init); diff --git a/trunk/arch/arm/mach-msm/include/mach/system.h b/trunk/arch/arm/mach-msm/include/mach/system.h index f5fb2ec87ffe..311db2b35da0 100644 --- a/trunk/arch/arm/mach-msm/include/mach/system.h +++ b/trunk/arch/arm/mach-msm/include/mach/system.h @@ -12,6 +12,7 @@ * GNU General Public License for more details. * */ +void arch_idle(void); /* low level hardware reset hook -- for example, hitting the * PSHOLD line on the PMIC to hard reset the system diff --git a/trunk/arch/arm/mach-mv78xx0/include/mach/system.h b/trunk/arch/arm/mach-mv78xx0/include/mach/system.h new file mode 100644 index 000000000000..8c3a5387cec7 --- /dev/null +++ b/trunk/arch/arm/mach-mv78xx0/include/mach/system.h @@ -0,0 +1,17 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/system.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-mxs/Kconfig b/trunk/arch/arm/mach-mxs/Kconfig index c57f9964a713..cf00b3e3be85 100644 --- a/trunk/arch/arm/mach-mxs/Kconfig +++ b/trunk/arch/arm/mach-mxs/Kconfig @@ -83,18 +83,6 @@ config MODULE_M28 select MXS_HAVE_PLATFORM_MXSFB select MXS_OCOTP -config MODULE_APX4 - bool - select SOC_IMX28 - select LEDS_GPIO_REGISTER - select MXS_HAVE_AMBA_DUART - select MXS_HAVE_PLATFORM_AUART - select MXS_HAVE_PLATFORM_FEC - select MXS_HAVE_PLATFORM_MXS_I2C - select MXS_HAVE_PLATFORM_MXS_MMC - select MXS_HAVE_PLATFORM_MXS_SAIF - select MXS_OCOTP - config MACH_TX28 bool "Ka-Ro TX28 module" select MODULE_TX28 @@ -103,8 +91,4 @@ config MACH_M28EVK bool "Support DENX M28EVK Platform" select MODULE_M28 -config MACH_APX4DEVKIT - bool "Support Bluegiga APX4 Development Kit" - select MODULE_APX4 - endif diff --git a/trunk/arch/arm/mach-mxs/Makefile b/trunk/arch/arm/mach-mxs/Makefile index 908bf9a567f1..8c93b24896bf 100644 --- a/trunk/arch/arm/mach-mxs/Makefile +++ b/trunk/arch/arm/mach-mxs/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o -obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o obj-$(CONFIG_MODULE_TX28) += module-tx28.o obj-$(CONFIG_MACH_TX28) += mach-tx28.o diff --git a/trunk/arch/arm/mach-mxs/devices.c b/trunk/arch/arm/mach-mxs/devices.c index 01faffec3064..fe3e847930c9 100644 --- a/trunk/arch/arm/mach-mxs/devices.c +++ b/trunk/arch/arm/mach-mxs/devices.c @@ -77,18 +77,16 @@ struct platform_device *__init mxs_add_platform_device_dmamask( int __init mxs_add_amba_device(const struct amba_device *dev) { - struct amba_device *adev = amba_device_alloc(dev->dev.init_name, - dev->res.start, resource_size(&dev->res)); + struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL); if (!adev) { pr_err("%s: failed to allocate memory", __func__); return -ENOMEM; } - adev->irq[0] = dev->irq[0]; - adev->irq[1] = dev->irq[1]; + *adev = *dev; - return amba_device_add(adev, &iomem_resource); + return amba_device_register(adev, &iomem_resource); } struct device mxs_apbh_bus = { diff --git a/trunk/arch/arm/mach-mxs/devices/amba-duart.c b/trunk/arch/arm/mach-mxs/devices/amba-duart.c index a5479f766046..a559db09b49c 100644 --- a/trunk/arch/arm/mach-mxs/devices/amba-duart.c +++ b/trunk/arch/arm/mach-mxs/devices/amba-duart.c @@ -23,7 +23,7 @@ const struct amba_device name##_device __initconst = { \ .end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \ .flags = IORESOURCE_MEM, \ }, \ - .irq = {soc ## _INT_DUART}, \ + .irq = {soc ## _INT_DUART, NO_IRQ}, \ } #ifdef CONFIG_SOC_IMX23 diff --git a/trunk/arch/arm/mach-mxs/include/mach/digctl.h b/trunk/arch/arm/mach-mxs/include/mach/digctl.h index 17964066303f..49a888c65d6d 100644 --- a/trunk/arch/arm/mach-mxs/include/mach/digctl.h +++ b/trunk/arch/arm/mach-mxs/include/mach/digctl.h @@ -18,5 +18,4 @@ #define HW_DIGCTL_CTRL 0x0 #define BP_DIGCTL_CTRL_SAIF_CLKMUX 10 #define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10) -#define HW_DIGCTL_CHIPID 0x310 #endif diff --git a/trunk/arch/arm/mach-mxs/include/mach/mxs.h b/trunk/arch/arm/mach-mxs/include/mach/mxs.h index 7d4fb6d0afda..bde5f6634747 100644 --- a/trunk/arch/arm/mach-mxs/include/mach/mxs.h +++ b/trunk/arch/arm/mach-mxs/include/mach/mxs.h @@ -23,9 +23,21 @@ #include #endif #include -#include #include +/* + * MXS CPU types + */ +#define cpu_is_mx23() ( \ + machine_is_mx23evk() || \ + machine_is_stmp378x() || \ + 0) +#define cpu_is_mx28() ( \ + machine_is_mx28evk() || \ + machine_is_m28evk() || \ + machine_is_tx28() || \ + 0) + /* * IO addresses common to MXS-based */ @@ -97,21 +109,6 @@ static inline void __mxs_togl(u32 mask, void __iomem *reg) { __raw_writel(mask, reg + MXS_TOG_ADDR); } - -/* - * MXS CPU types - */ -#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID) - -static inline int cpu_is_mx23(void) -{ - return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780); -} - -static inline int cpu_is_mx28(void) -{ - return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800); -} #endif #endif /* __MACH_MXS_H__ */ diff --git a/trunk/arch/arm/mach-mxs/include/mach/system.h b/trunk/arch/arm/mach-mxs/include/mach/system.h new file mode 100644 index 000000000000..e7ad1bb29423 --- /dev/null +++ b/trunk/arch/arm/mach-mxs/include/mach/system.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_MXS_SYSTEM_H__ +#define __MACH_MXS_SYSTEM_H__ + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif /* __MACH_MXS_SYSTEM_H__ */ diff --git a/trunk/arch/arm/mach-mxs/include/mach/uncompress.h b/trunk/arch/arm/mach-mxs/include/mach/uncompress.h index ef2811495446..67776746f143 100644 --- a/trunk/arch/arm/mach-mxs/include/mach/uncompress.h +++ b/trunk/arch/arm/mach-mxs/include/mach/uncompress.h @@ -18,6 +18,8 @@ #ifndef __MACH_MXS_UNCOMPRESS_H__ #define __MACH_MXS_UNCOMPRESS_H__ +#include + unsigned long mxs_duart_base; #define MXS_DUART(x) (*(volatile unsigned long *)(mxs_duart_base + (x))) @@ -53,17 +55,16 @@ static inline void flush(void) #define MX23_DUART_BASE_ADDR 0x80070000 #define MX28_DUART_BASE_ADDR 0x80074000 -#define MXS_DIGCTL_CHIPID 0x8001c310 static inline void __arch_decomp_setup(unsigned long arch_id) { - u16 chipid = (*(volatile unsigned long *) MXS_DIGCTL_CHIPID) >> 16; - - switch (chipid) { - case 0x3780: + switch (arch_id) { + case MACH_TYPE_MX23EVK: mxs_duart_base = MX23_DUART_BASE_ADDR; break; - case 0x2800: + case MACH_TYPE_MX28EVK: + case MACH_TYPE_M28EVK: + case MACH_TYPE_TX28: mxs_duart_base = MX28_DUART_BASE_ADDR; break; default: diff --git a/trunk/arch/arm/mach-mxs/mach-apx4devkit.c b/trunk/arch/arm/mach-mxs/mach-apx4devkit.c deleted file mode 100644 index 48a7fab571a6..000000000000 --- a/trunk/arch/arm/mach-mxs/mach-apx4devkit.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - * Copyright (C) 2011-2012 - * Lauri Hintsala, Bluegiga, - * Veli-Pekka Peltola, Bluegiga, - * - * based on: mach-mx28evk.c - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include "devices-mx28.h" - -#define APX4DEVKIT_GPIO_USERLED MXS_GPIO_NR(3, 28) - -static const iomux_cfg_t apx4devkit_pads[] __initconst = { - /* duart */ - MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, - MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, - - /* auart0 */ - MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL, - MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL, - MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL, - MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL, - - /* auart1 */ - MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL, - MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL, - - /* auart2 */ - MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL, - MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL, - - /* auart3 */ - MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL, - MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL, - -#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP) - /* fec0 */ - MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC, - MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC, - MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC, - MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC, - MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC, - - /* i2c */ - MX28_PAD_I2C0_SCL__I2C0_SCL, - MX28_PAD_I2C0_SDA__I2C0_SDA, - - /* mmc0 */ - MX28_PAD_SSP0_DATA0__SSP0_D0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA1__SSP0_D1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA2__SSP0_D2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA3__SSP0_D3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA4__SSP0_D4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA5__SSP0_D5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA6__SSP0_D6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA7__SSP0_D7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_CMD__SSP0_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_SSP0_SCK__SSP0_SCK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - - /* led */ - MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL, - - /* saif0 & saif1 */ - MX28_PAD_SAIF0_MCLK__SAIF0_MCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), -}; - -/* led */ -static const struct gpio_led apx4devkit_leds[] __initconst = { - { - .name = "user-led", - .default_trigger = "heartbeat", - .gpio = APX4DEVKIT_GPIO_USERLED, - }, -}; - -static const struct gpio_led_platform_data apx4devkit_led_data __initconst = { - .leds = apx4devkit_leds, - .num_leds = ARRAY_SIZE(apx4devkit_leds), -}; - -static const struct fec_platform_data mx28_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = { - .wp_gpio = -EINVAL, - .flags = SLOTF_4_BIT_CAPABLE, -}; - -static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = { - { I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */ - { I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */ -}; - -#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \ - defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) -static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = { - REGULATOR_SUPPLY("VDDA", "0-000a"), - REGULATOR_SUPPLY("VDDIO", "0-000a"), -}; - -static struct regulator_init_data apx4devkit_vdd_reg_init_data = { - .constraints = { - .name = "3V3", - .always_on = 1, - }, - .consumer_supplies = apx4devkit_audio_consumer_supplies, - .num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies), -}; - -static struct fixed_voltage_config apx4devkit_vdd_pdata = { - .supply_name = "board-3V3", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 1, - .init_data = &apx4devkit_vdd_reg_init_data, -}; - -static struct platform_device apx4devkit_voltage_regulator = { - .name = "reg-fixed-voltage", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &apx4devkit_vdd_pdata, - }, -}; - -static void __init apx4devkit_add_regulators(void) -{ - platform_device_register(&apx4devkit_voltage_regulator); -} -#else -static void __init apx4devkit_add_regulators(void) {} -#endif - -static const struct mxs_saif_platform_data - apx4devkit_mxs_saif_pdata[] __initconst = { - /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */ - { - .master_mode = 1, - .master_id = 0, - }, { - .master_mode = 0, - .master_id = 0, - }, -}; - -static int apx4devkit_phy_fixup(struct phy_device *phy) -{ - phy->dev_flags |= MICREL_PHY_50MHZ_CLK; - return 0; -} - -static void __init apx4devkit_init(void) -{ - mxs_iomux_setup_multiple_pads(apx4devkit_pads, - ARRAY_SIZE(apx4devkit_pads)); - - mx28_add_duart(); - mx28_add_auart0(); - mx28_add_auart1(); - mx28_add_auart2(); - mx28_add_auart3(); - - /* - * Register fixup for the Micrel KS8031 PHY clock - * (shares same ID with KS8051) - */ - phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, - apx4devkit_phy_fixup); - - mx28_add_fec(0, &mx28_fec_pdata); - - mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata); - - gpio_led_register_device(0, &apx4devkit_led_data); - - mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); - mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]); - mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]); - - apx4devkit_add_regulators(); - - mx28_add_mxs_i2c(0); - i2c_register_board_info(0, apx4devkit_i2c_boardinfo, - ARRAY_SIZE(apx4devkit_i2c_boardinfo)); - - mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0); -} - -static void __init apx4devkit_timer_init(void) -{ - mx28_clocks_init(); -} - -static struct sys_timer apx4devkit_timer = { - .init = apx4devkit_timer_init, -}; - -MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit") - .map_io = mx28_map_io, - .init_irq = mx28_init_irq, - .timer = &apx4devkit_timer, - .init_machine = apx4devkit_init, - .restart = mxs_restart, -MACHINE_END diff --git a/trunk/arch/arm/mach-mxs/mach-m28evk.c b/trunk/arch/arm/mach-mxs/mach-m28evk.c index 06d79963611c..2f2758230edf 100644 --- a/trunk/arch/arm/mach-mxs/mach-m28evk.c +++ b/trunk/arch/arm/mach-mxs/mach-m28evk.c @@ -247,15 +247,18 @@ static int __init m28evk_fec_get_mac(void) u32 val; const u32 *ocotp = mxs_get_ocotp(); - if (!ocotp) + if (!ocotp) { + pr_err("%s: timeout when reading fec mac from OCOTP\n", + __func__); return -ETIMEDOUT; + } /* * OCOTP only stores the last 4 octets for each mac address, * so hard-code DENX OUI (C0:E5:4E) here. */ for (i = 0; i < 2; i++) { - val = ocotp[i]; + val = ocotp[i * 4]; mx28_fec_pdata[i].mac[0] = 0xC0; mx28_fec_pdata[i].mac[1] = 0xE5; mx28_fec_pdata[i].mac[2] = 0x4E; diff --git a/trunk/arch/arm/mach-mxs/mach-mx28evk.c b/trunk/arch/arm/mach-mxs/mach-mx28evk.c index e386c142f93c..fdb0a5664dd6 100644 --- a/trunk/arch/arm/mach-mxs/mach-mx28evk.c +++ b/trunk/arch/arm/mach-mxs/mach-mx28evk.c @@ -223,6 +223,7 @@ static const struct gpio_led_platform_data mx28evk_led_data __initconst = { /* fec */ static void __init mx28evk_fec_reset(void) { + int ret; struct clk *clk; /* Enable fec phy clock */ @@ -230,7 +231,32 @@ static void __init mx28evk_fec_reset(void) if (!IS_ERR(clk)) clk_prepare_enable(clk); - gpio_set_value(MX28EVK_FEC_PHY_RESET, 0); + /* Power up fec phy */ + ret = gpio_request(MX28EVK_FEC_PHY_POWER, "fec-phy-power"); + if (ret) { + pr_err("Failed to request gpio fec-phy-%s: %d\n", "power", ret); + return; + } + + ret = gpio_direction_output(MX28EVK_FEC_PHY_POWER, 0); + if (ret) { + pr_err("Failed to drive gpio fec-phy-%s: %d\n", "power", ret); + return; + } + + /* Reset fec phy */ + ret = gpio_request(MX28EVK_FEC_PHY_RESET, "fec-phy-reset"); + if (ret) { + pr_err("Failed to request gpio fec-phy-%s: %d\n", "reset", ret); + return; + } + + gpio_direction_output(MX28EVK_FEC_PHY_RESET, 0); + if (ret) { + pr_err("Failed to drive gpio fec-phy-%s: %d\n", "reset", ret); + return; + } + mdelay(1); gpio_set_value(MX28EVK_FEC_PHY_RESET, 1); } @@ -252,14 +278,14 @@ static int __init mx28evk_fec_get_mac(void) const u32 *ocotp = mxs_get_ocotp(); if (!ocotp) - return -ETIMEDOUT; + goto error; /* * OCOTP only stores the last 4 octets for each mac address, * so hard-code Freescale OUI (00:04:9f) here. */ for (i = 0; i < 2; i++) { - val = ocotp[i]; + val = ocotp[i * 4]; mx28_fec_pdata[i].mac[0] = 0x00; mx28_fec_pdata[i].mac[1] = 0x04; mx28_fec_pdata[i].mac[2] = 0x9f; @@ -269,6 +295,10 @@ static int __init mx28evk_fec_get_mac(void) } return 0; + +error: + pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__); + return -ETIMEDOUT; } /* @@ -387,14 +417,9 @@ static void __init mx28evk_add_regulators(void) static void __init mx28evk_add_regulators(void) {} #endif -static const struct gpio mx28evk_gpios[] __initconst = { +static struct gpio mx28evk_lcd_gpios[] = { { MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" }, { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" }, - { MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" }, - { MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" }, - { MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" }, - { MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" }, - { MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" }, }; static const struct mxs_saif_platform_data @@ -422,18 +447,25 @@ static void __init mx28evk_init(void) if (mx28evk_fec_get_mac()) pr_warn("%s: failed on fec mac setup\n", __func__); - ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios)); - if (ret) - pr_err("One or more GPIOs failed to be requested: %d\n", ret); - mx28evk_fec_reset(); mx28_add_fec(0, &mx28_fec_pdata[0]); mx28_add_fec(1, &mx28_fec_pdata[1]); - mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); - mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); + ret = gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, + "flexcan-switch"); + if (ret) { + pr_err("failed to request gpio flexcan-switch: %d\n", ret); + } else { + mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); + mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); + } - mx28_add_mxsfb(&mx28evk_mxsfb_pdata); + ret = gpio_request_array(mx28evk_lcd_gpios, + ARRAY_SIZE(mx28evk_lcd_gpios)); + if (ret) + pr_warn("failed to request gpio pins for lcd: %d\n", ret); + else + mx28_add_mxsfb(&mx28evk_mxsfb_pdata); mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]); @@ -448,8 +480,20 @@ static void __init mx28evk_init(void) mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0); - mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); - mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); + /* power on mmc slot by writing 0 to the gpio */ + ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, + "mmc0-slot-power"); + if (ret) + pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); + else + mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); + + ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, + "mmc1-slot-power"); + if (ret) + pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret); + else + mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); mx28_add_rtc_stmp3xxx(); diff --git a/trunk/arch/arm/mach-mxs/pm.c b/trunk/arch/arm/mach-mxs/pm.c index a9b4bbcdafb4..fb042da29bda 100644 --- a/trunk/arch/arm/mach-mxs/pm.c +++ b/trunk/arch/arm/mach-mxs/pm.c @@ -15,12 +15,13 @@ #include #include #include +#include static int mxs_suspend_enter(suspend_state_t state) { switch (state) { case PM_SUSPEND_MEM: - cpu_do_idle(); + arch_idle(); break; default: diff --git a/trunk/arch/arm/mach-netx/fb.c b/trunk/arch/arm/mach-netx/fb.c index 2cdf6ef69bee..b9913234bbf6 100644 --- a/trunk/arch/arm/mach-netx/fb.c +++ b/trunk/arch/arm/mach-netx/fb.c @@ -92,7 +92,18 @@ void clk_put(struct clk *clk) { } -static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL); +static struct amba_device fb_device = { + .dev = { + .init_name = "fb", + .coherent_dma_mask = ~0, + }, + .res = { + .start = 0x00104000, + .end = 0x00104fff, + .flags = IORESOURCE_MEM, + }, + .irq = { NETX_IRQ_LCD, NO_IRQ }, +}; int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel) { diff --git a/trunk/arch/arm/mach-netx/include/mach/system.h b/trunk/arch/arm/mach-netx/include/mach/system.h new file mode 100644 index 000000000000..b38fa36d58c4 --- /dev/null +++ b/trunk/arch/arm/mach-netx/include/mach/system.h @@ -0,0 +1,28 @@ +/* + * arch/arm/mach-netx/include/mach/system.h + * + * Copyright (C) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif + diff --git a/trunk/arch/arm/mach-nomadik/board-nhk8815.c b/trunk/arch/arm/mach-nomadik/board-nhk8815.c index f6f74adbe8c4..7c878bf00340 100644 --- a/trunk/arch/arm/mach-nomadik/board-nhk8815.c +++ b/trunk/arch/arm/mach-nomadik/board-nhk8815.c @@ -185,11 +185,20 @@ static void __init nhk8815_onenand_init(void) #endif } -static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE, - { IRQ_UART0 }, NULL); +#define __MEM_4K_RESOURCE(x) \ + .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} -static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE, - { IRQ_UART1 }, NULL); +static struct amba_device uart0_device = { + .dev = { .init_name = "uart0" }, + __MEM_4K_RESOURCE(NOMADIK_UART0_BASE), + .irq = {IRQ_UART0, NO_IRQ}, +}; + +static struct amba_device uart1_device = { + .dev = { .init_name = "uart1" }, + __MEM_4K_RESOURCE(NOMADIK_UART1_BASE), + .irq = {IRQ_UART1, NO_IRQ}, +}; static struct amba_device *amba_devs[] __initdata = { &uart0_device, diff --git a/trunk/arch/arm/mach-nomadik/cpu-8815.c b/trunk/arch/arm/mach-nomadik/cpu-8815.c index 27f43a46985e..65df7b4fdd3e 100644 --- a/trunk/arch/arm/mach-nomadik/cpu-8815.c +++ b/trunk/arch/arm/mach-nomadik/cpu-8815.c @@ -97,7 +97,12 @@ static struct platform_device cpu8815_platform_gpio[] = { GPIO_DEVICE(3), }; -static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL); +static struct amba_device cpu8815_amba_rng = { + .dev = { + .init_name = "rng", + }, + __MEM_4K_RESOURCE(NOMADIK_RNG_BASE), +}; static struct platform_device *platform_devs[] __initdata = { cpu8815_platform_gpio + 0, @@ -107,7 +112,7 @@ static struct platform_device *platform_devs[] __initdata = { }; static struct amba_device *amba_devs[] __initdata = { - &cpu8815_amba_rng_device + &cpu8815_amba_rng }; static int __init cpu8815_init(void) diff --git a/trunk/arch/arm/mach-nomadik/include/mach/system.h b/trunk/arch/arm/mach-nomadik/include/mach/system.h new file mode 100644 index 000000000000..25e198b8976c --- /dev/null +++ b/trunk/arch/arm/mach-nomadik/include/mach/system.h @@ -0,0 +1,32 @@ +/* + * mach-nomadik/include/mach/system.h + * + * Copyright (C) 2008 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-omap1/Kconfig b/trunk/arch/arm/mach-omap1/Kconfig index 5b1edbae6893..4f8d66f044e7 100644 --- a/trunk/arch/arm/mach-omap1/Kconfig +++ b/trunk/arch/arm/mach-omap1/Kconfig @@ -155,8 +155,6 @@ config MACH_AMS_DELTA bool "Amstrad E3 (Delta)" depends on ARCH_OMAP1 && ARCH_OMAP15XX select FIQ - select GPIO_GENERIC_PLATFORM - select LEDS_GPIO_REGISTER help Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. diff --git a/trunk/arch/arm/mach-omap1/board-ams-delta.c b/trunk/arch/arm/mach-omap1/board-ams-delta.c index 87b13039f936..88909cc0b254 100644 --- a/trunk/arch/arm/mach-omap1/board-ams-delta.c +++ b/trunk/arch/arm/mach-omap1/board-ams-delta.c @@ -11,7 +11,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include #include #include #include @@ -41,6 +40,9 @@ #include +static u8 ams_delta_latch1_reg; +static u16 ams_delta_latch2_reg; + static const unsigned int ams_delta_keymap[] = { KEY(0, 0, KEY_F1), /* Advert */ @@ -119,32 +121,39 @@ static const unsigned int ams_delta_keymap[] = { KEY(7, 3, KEY_LEFTCTRL), /* Vol down */ }; -#define LATCH1_PHYS 0x01000000 -#define LATCH1_VIRT 0xEA000000 -#define MODEM_PHYS 0x04000000 -#define MODEM_VIRT 0xEB000000 -#define LATCH2_PHYS 0x08000000 -#define LATCH2_VIRT 0xEC000000 +void ams_delta_latch1_write(u8 mask, u8 value) +{ + ams_delta_latch1_reg &= ~mask; + ams_delta_latch1_reg |= value; + *(volatile __u8 *) AMS_DELTA_LATCH1_VIRT = ams_delta_latch1_reg; +} + +void ams_delta_latch2_write(u16 mask, u16 value) +{ + ams_delta_latch2_reg &= ~mask; + ams_delta_latch2_reg |= value; + *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg; +} static struct map_desc ams_delta_io_desc[] __initdata = { /* AMS_DELTA_LATCH1 */ { - .virtual = LATCH1_VIRT, - .pfn = __phys_to_pfn(LATCH1_PHYS), + .virtual = AMS_DELTA_LATCH1_VIRT, + .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS), .length = 0x01000000, .type = MT_DEVICE }, /* AMS_DELTA_LATCH2 */ { - .virtual = LATCH2_VIRT, - .pfn = __phys_to_pfn(LATCH2_PHYS), + .virtual = AMS_DELTA_LATCH2_VIRT, + .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS), .length = 0x01000000, .type = MT_DEVICE }, /* AMS_DELTA_MODEM */ { - .virtual = MODEM_VIRT, - .pfn = __phys_to_pfn(MODEM_PHYS), + .virtual = AMS_DELTA_MODEM_VIRT, + .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS), .length = 0x01000000, .type = MT_DEVICE } @@ -164,113 +173,6 @@ static struct omap_board_config_kernel ams_delta_config[] __initdata = { { OMAP_TAG_LCD, &ams_delta_lcd_config }, }; -#define LATCH1_GPIO_BASE 232 -#define LATCH1_NGPIO 8 - -static struct resource latch1_resources[] __initconst = { - [0] = { - .name = "dat", - .start = LATCH1_PHYS, - .end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8, - .flags = IORESOURCE_MEM, - }, -}; - -static struct bgpio_pdata latch1_pdata __initconst = { - .base = LATCH1_GPIO_BASE, - .ngpio = LATCH1_NGPIO, -}; - -static struct platform_device latch1_gpio_device = { - .name = "basic-mmio-gpio", - .id = 0, - .resource = latch1_resources, - .num_resources = ARRAY_SIZE(latch1_resources), - .dev = { - .platform_data = &latch1_pdata, - }, -}; - -static struct resource latch2_resources[] __initconst = { - [0] = { - .name = "dat", - .start = LATCH2_PHYS, - .end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8, - .flags = IORESOURCE_MEM, - }, -}; - -static struct bgpio_pdata latch2_pdata __initconst = { - .base = AMS_DELTA_LATCH2_GPIO_BASE, - .ngpio = AMS_DELTA_LATCH2_NGPIO, -}; - -static struct platform_device latch2_gpio_device = { - .name = "basic-mmio-gpio", - .id = 1, - .resource = latch2_resources, - .num_resources = ARRAY_SIZE(latch2_resources), - .dev = { - .platform_data = &latch2_pdata, - }, -}; - -static struct gpio latch_gpios[] __initconst = { - { - .gpio = LATCH1_GPIO_BASE + 6, - .flags = GPIOF_OUT_INIT_LOW, - .label = "dockit1", - }, - { - .gpio = LATCH1_GPIO_BASE + 7, - .flags = GPIOF_OUT_INIT_LOW, - .label = "dockit2", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN, - .flags = GPIOF_OUT_INIT_LOW, - .label = "scard_rstin", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC, - .flags = GPIOF_OUT_INIT_LOW, - .label = "scard_cmdvcc", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, - .flags = GPIOF_OUT_INIT_LOW, - .label = "modem_nreset", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC, - .flags = GPIOF_OUT_INIT_LOW, - .label = "modem_codec", - }, - { - .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14, - .flags = GPIOF_OUT_INIT_LOW, - .label = "hookflash1", - }, - { - .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15, - .flags = GPIOF_OUT_INIT_LOW, - .label = "hookflash2", - }, -}; - -void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) -{ - int bit = 0; - u16 bitpos = 1 << bit; - - for (; bit < ngpio; bit++, bitpos = bitpos << 1) { - if (!(mask & bitpos)) - continue; - gpio_set_value(base + bit, (value & bitpos) != 0); - } -} -EXPORT_SYMBOL(ams_delta_latch_write); - static struct resource ams_delta_nand_resources[] = { [0] = { .start = OMAP1_MPUIO_BASE, @@ -322,45 +224,9 @@ static struct platform_device ams_delta_lcd_device = { .id = -1, }; -static struct gpio_led gpio_leds[] __initconst = { - { - .name = "camera", - .gpio = LATCH1_GPIO_BASE + 0, - .default_state = LEDS_GPIO_DEFSTATE_OFF, -#ifdef CONFIG_LEDS_TRIGGERS - .default_trigger = "ams_delta_camera", -#endif - }, - { - .name = "advert", - .gpio = LATCH1_GPIO_BASE + 1, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "email", - .gpio = LATCH1_GPIO_BASE + 2, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "handsfree", - .gpio = LATCH1_GPIO_BASE + 3, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "voicemail", - .gpio = LATCH1_GPIO_BASE + 4, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "voice", - .gpio = LATCH1_GPIO_BASE + 5, - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, -}; - -static struct gpio_led_platform_data leds_pdata __initconst = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), +static struct platform_device ams_delta_led_device = { + .name = "ams-delta-led", + .id = -1 }; static struct i2c_board_info ams_delta_camera_board_info[] = { @@ -409,15 +275,11 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = { }; static struct platform_device *ams_delta_devices[] __initdata = { - &latch1_gpio_device, - &latch2_gpio_device, - &ams_delta_kp_device, - &ams_delta_camera_device, -}; - -static struct platform_device *late_devices[] __initconst = { &ams_delta_nand_device, + &ams_delta_kp_device, &ams_delta_lcd_device, + &ams_delta_led_device, + &ams_delta_camera_device, }; static void __init ams_delta_init(void) @@ -445,13 +307,15 @@ static void __init ams_delta_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); + /* Clear latch2 (NAND, LCD, modem enable) */ + ams_delta_latch2_write(~0, 0); + omap1_usb_init(&ams_delta_usb_config); omap1_set_camera_info(&ams_delta_camera_platform_data); #ifdef CONFIG_LEDS_TRIGGERS led_trigger_register_simple("ams_delta_camera", &ams_delta_camera_led_trigger); #endif - gpio_led_register_device(-1, &leds_pdata); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); ams_delta_init_fiq(); @@ -461,8 +325,8 @@ static void __init ams_delta_init(void) static struct plat_serial8250_port ams_delta_modem_ports[] = { { - .membase = IOMEM(MODEM_VIRT), - .mapbase = MODEM_PHYS, + .membase = IOMEM(AMS_DELTA_MODEM_VIRT), + .mapbase = AMS_DELTA_MODEM_PHYS, .irq = -EINVAL, /* changed later */ .flags = UPF_BOOT_AUTOCONF, .irqflags = IRQF_TRIGGER_RISING, @@ -481,21 +345,13 @@ static struct platform_device ams_delta_modem_device = { }, }; -static int __init late_init(void) +static int __init ams_delta_modem_init(void) { int err; if (!machine_is_ams_delta()) return -ENODEV; - err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios)); - if (err) { - pr_err("Couldn't take over latch1/latch2 GPIO pins\n"); - return err; - } - - platform_add_devices(late_devices, ARRAY_SIZE(late_devices)); - omap_cfg_reg(M14_1510_GPIO2); ams_delta_modem_ports[0].irq = gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); @@ -511,16 +367,9 @@ static int __init late_init(void) AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC, AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC); - err = platform_device_register(&ams_delta_modem_device); - if (err) - goto gpio_free; - return 0; - -gpio_free: - gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); - return err; + return platform_device_register(&ams_delta_modem_device); } -late_initcall(late_init); +arch_initcall(ams_delta_modem_init); static void __init ams_delta_map_io(void) { @@ -539,3 +388,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .timer = &omap1_timer, .restart = omap1_restart, MACHINE_END + +EXPORT_SYMBOL(ams_delta_latch1_write); +EXPORT_SYMBOL(ams_delta_latch2_write); diff --git a/trunk/arch/arm/mach-omap1/include/mach/system.h b/trunk/arch/arm/mach-omap1/include/mach/system.h new file mode 100644 index 000000000000..a6c1b3a16dfc --- /dev/null +++ b/trunk/arch/arm/mach-omap1/include/mach/system.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/system.h + */ + +#include diff --git a/trunk/arch/arm/mach-omap1/pm.c b/trunk/arch/arm/mach-omap1/pm.c index 0c2c3669d594..89ea20ca0ccc 100644 --- a/trunk/arch/arm/mach-omap1/pm.c +++ b/trunk/arch/arm/mach-omap1/pm.c @@ -42,9 +42,9 @@ #include #include #include -#include #include +#include #include #include @@ -108,7 +108,13 @@ void omap1_pm_idle(void) __u32 use_idlect1 = arm_idlect1_mask; int do_sleep = 0; + local_irq_disable(); local_fiq_disable(); + if (need_resched()) { + local_fiq_enable(); + local_irq_enable(); + return; + } #if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER) #warning Enable 32kHz OS timer in order to allow sleep states in idle @@ -151,12 +157,14 @@ void omap1_pm_idle(void) omap_writel(saved_idlect1, ARM_IDLECT1); local_fiq_enable(); + local_irq_enable(); return; } omap_sram_suspend(omap_readl(ARM_IDLECT1), omap_readl(ARM_IDLECT2)); local_fiq_enable(); + local_irq_enable(); } /* @@ -575,6 +583,8 @@ static void omap_pm_init_proc(void) #endif /* DEBUG && CONFIG_PROC_FS */ +static void (*saved_idle)(void) = NULL; + /* * omap_pm_prepare - Do preliminary suspend work. * @@ -582,7 +592,8 @@ static void omap_pm_init_proc(void) static int omap_pm_prepare(void) { /* We cannot sleep in idle until we have resumed */ - disable_hlt(); + saved_idle = pm_idle; + pm_idle = NULL; return 0; } @@ -619,7 +630,7 @@ static int omap_pm_enter(suspend_state_t state) static void omap_pm_finish(void) { - enable_hlt(); + pm_idle = saved_idle; } @@ -676,7 +687,7 @@ static int __init omap_pm_init(void) return -ENODEV; } - arm_pm_idle = omap1_pm_idle; + pm_idle = omap1_pm_idle; if (cpu_is_omap7xx()) setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); diff --git a/trunk/arch/arm/mach-omap2/emu.c b/trunk/arch/arm/mach-omap2/emu.c index ce91aad4cdad..9c442e290ccb 100644 --- a/trunk/arch/arm/mach-omap2/emu.c +++ b/trunk/arch/arm/mach-omap2/emu.c @@ -30,8 +30,29 @@ MODULE_AUTHOR("Alexander Shishkin"); #define ETB_BASE (L4_EMU_34XX_PHYS + 0x1b000) #define DAPCTL (L4_EMU_34XX_PHYS + 0x1d000) -static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL); -static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL); +static struct amba_device omap3_etb_device = { + .dev = { + .init_name = "etb", + }, + .res = { + .start = ETB_BASE, + .end = ETB_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .periphid = 0x000bb907, +}; + +static struct amba_device omap3_etm_device = { + .dev = { + .init_name = "etm", + }, + .res = { + .start = ETM_BASE, + .end = ETM_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .periphid = 0x102bb921, +}; static int __init emu_init(void) { @@ -45,3 +66,4 @@ static int __init emu_init(void) } subsys_initcall(emu_init); + diff --git a/trunk/arch/arm/mach-omap2/include/mach/system.h b/trunk/arch/arm/mach-omap2/include/mach/system.h new file mode 100644 index 000000000000..d488721ab90b --- /dev/null +++ b/trunk/arch/arm/mach-omap2/include/mach/system.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/system.h + */ + +#include diff --git a/trunk/arch/arm/mach-omap2/pm24xx.c b/trunk/arch/arm/mach-omap2/pm24xx.c index a4eb5c280435..23de98d03841 100644 --- a/trunk/arch/arm/mach-omap2/pm24xx.c +++ b/trunk/arch/arm/mach-omap2/pm24xx.c @@ -226,6 +226,7 @@ static int omap2_can_sleep(void) static void omap2_pm_idle(void) { + local_irq_disable(); local_fiq_disable(); if (!omap2_can_sleep()) { @@ -242,6 +243,7 @@ static void omap2_pm_idle(void) out: local_fiq_enable(); + local_irq_enable(); } #ifdef CONFIG_SUSPEND @@ -460,7 +462,7 @@ static int __init omap2_pm_init(void) } suspend_set_ops(&omap_pm_ops); - arm_pm_idle = omap2_pm_idle; + pm_idle = omap2_pm_idle; return 0; } diff --git a/trunk/arch/arm/mach-omap2/pm34xx.c b/trunk/arch/arm/mach-omap2/pm34xx.c index b77df735fa6c..fc6987578920 100644 --- a/trunk/arch/arm/mach-omap2/pm34xx.c +++ b/trunk/arch/arm/mach-omap2/pm34xx.c @@ -418,9 +418,10 @@ void omap_sram_idle(void) static void omap3_pm_idle(void) { + local_irq_disable(); local_fiq_disable(); - if (omap_irq_pending()) + if (omap_irq_pending() || need_resched()) goto out; trace_power_start(POWER_CSTATE, 1, smp_processor_id()); @@ -433,6 +434,7 @@ static void omap3_pm_idle(void) out: local_fiq_enable(); + local_irq_enable(); } #ifdef CONFIG_SUSPEND @@ -846,7 +848,7 @@ static int __init omap3_pm_init(void) suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ - arm_pm_idle = omap3_pm_idle; + pm_idle = omap3_pm_idle; omap3_idle_init(); /* diff --git a/trunk/arch/arm/mach-omap2/pm44xx.c b/trunk/arch/arm/mach-omap2/pm44xx.c index c840689df24a..c264ef7219c1 100644 --- a/trunk/arch/arm/mach-omap2/pm44xx.c +++ b/trunk/arch/arm/mach-omap2/pm44xx.c @@ -173,16 +173,18 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) * omap_default_idle - OMAP4 default ilde routine.' * * Implements OMAP4 memory, IO ordering requirements which can't be addressed - * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and + * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and * by secondary CPU with CONFIG_CPUIDLE. */ static void omap_default_idle(void) { + local_irq_disable(); local_fiq_disable(); omap_do_wfi(); local_fiq_enable(); + local_irq_enable(); } /** @@ -253,8 +255,8 @@ static int __init omap4_pm_init(void) suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ - /* Overwrite the default cpu_do_idle() */ - arm_pm_idle = omap_default_idle; + /* Overwrite the default arch_idle() */ + pm_idle = omap_default_idle; omap4_idle_init(); diff --git a/trunk/arch/arm/mach-omap2/prm_common.c b/trunk/arch/arm/mach-omap2/prm_common.c index 873b51d494ea..860118ab43e2 100644 --- a/trunk/arch/arm/mach-omap2/prm_common.c +++ b/trunk/arch/arm/mach-omap2/prm_common.c @@ -24,6 +24,7 @@ #include #include +#include #include #include #include diff --git a/trunk/arch/arm/mach-orion5x/include/mach/system.h b/trunk/arch/arm/mach-orion5x/include/mach/system.h new file mode 100644 index 000000000000..825a2650cefa --- /dev/null +++ b/trunk/arch/arm/mach-orion5x/include/mach/system.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-orion5x/include/mach/system.h + * + * Tzachi Perelstein + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-picoxcell/include/mach/system.h b/trunk/arch/arm/mach-picoxcell/include/mach/system.h new file mode 100644 index 000000000000..1a5d8cb57df4 --- /dev/null +++ b/trunk/arch/arm/mach-picoxcell/include/mach/system.h @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2011 Picochip Ltd., Jamie Iles + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching and wait for interrupt + * tricks. + */ + cpu_do_idle(); +} + +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/trunk/arch/arm/mach-pnx4008/include/mach/system.h b/trunk/arch/arm/mach-pnx4008/include/mach/system.h new file mode 100644 index 000000000000..60cfe7188091 --- /dev/null +++ b/trunk/arch/arm/mach-pnx4008/include/mach/system.h @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-pnx4008/include/mach/system.h + * + * Copyright (C) 2003 Philips Semiconductors + * Copyright (C) 2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-prima2/include/mach/system.h b/trunk/arch/arm/mach-prima2/include/mach/system.h new file mode 100644 index 000000000000..2c7d2a9d0c92 --- /dev/null +++ b/trunk/arch/arm/mach-prima2/include/mach/system.h @@ -0,0 +1,17 @@ +/* + * arch/arm/mach-prima2/include/mach/system.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_SYSTEM_H__ +#define __MACH_SYSTEM_H__ + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-pxa/hx4700.c b/trunk/arch/arm/mach-pxa/hx4700.c index f038da1e4196..fb9b62dcf4ca 100644 --- a/trunk/arch/arm/mach-pxa/hx4700.c +++ b/trunk/arch/arm/mach-pxa/hx4700.c @@ -244,21 +244,6 @@ static u16 asic3_gpio_config[] = { ASIC3_GPIOD15_nPIOW, }; -static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = { - [0] = { - .name = "hx4700:amber", - .default_trigger = "ds2760-battery.0-charging-blink-full-solid", - }, - [1] = { - .name = "hx4700:green", - .default_trigger = "unused", - }, - [2] = { - .name = "hx4700:blue", - .default_trigger = "hx4700-radio", - }, -}; - static struct resource asic3_resources[] = { /* GPIO part */ [0] = { @@ -289,7 +274,6 @@ static struct asic3_platform_data asic3_platform_data = { .gpio_config_num = ARRAY_SIZE(asic3_gpio_config), .irq_base = IRQ_BOARD_START, .gpio_base = HX4700_ASIC3_GPIO_BASE, - .leds = asic3_leds, }; static struct platform_device asic3 = { @@ -720,9 +704,10 @@ static void hx4700_set_vpp(struct platform_device *pdev, int vpp) gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp); } -static struct resource strataflash_resource[] = { - [0] = DEFINE_RES_MEM(PXA_CS0_PHYS, SZ_64M), - [1] = DEFINE_RES_MEM(PXA_CS0_PHYS + SZ_64M, SZ_64M), +static struct resource strataflash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_128M - 1, + .flags = IORESOURCE_MEM, }; static struct physmap_flash_data strataflash_data = { @@ -733,8 +718,8 @@ static struct physmap_flash_data strataflash_data = { static struct platform_device strataflash = { .name = "physmap-flash", .id = -1, - .resource = strataflash_resource, - .num_resources = ARRAY_SIZE(strataflash_resource), + .resource = &strataflash_resource, + .num_resources = 1, .dev = { .platform_data = &strataflash_data, }, diff --git a/trunk/arch/arm/mach-pxa/include/mach/system.h b/trunk/arch/arm/mach-pxa/include/mach/system.h new file mode 100644 index 000000000000..c5afacd3cc0b --- /dev/null +++ b/trunk/arch/arm/mach-pxa/include/mach/system.h @@ -0,0 +1,15 @@ +/* + * arch/arm/mach-pxa/include/mach/system.h + * + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +static inline void arch_idle(void) +{ + cpu_do_idle(); +} diff --git a/trunk/arch/arm/mach-pxa/pxa25x.c b/trunk/arch/arm/mach-pxa/pxa25x.c index 8a775f631c55..91e4f6c03766 100644 --- a/trunk/arch/arm/mach-pxa/pxa25x.c +++ b/trunk/arch/arm/mach-pxa/pxa25x.c @@ -209,7 +209,6 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), }; static struct clk_lookup pxa25x_hwuart_clkreg = diff --git a/trunk/arch/arm/mach-pxa/pxa27x.c b/trunk/arch/arm/mach-pxa/pxa27x.c index 6c49e66057e3..aed6cbcf3866 100644 --- a/trunk/arch/arm/mach-pxa/pxa27x.c +++ b/trunk/arch/arm/mach-pxa/pxa27x.c @@ -230,7 +230,6 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), }; #ifdef CONFIG_PM diff --git a/trunk/arch/arm/mach-realview/core.h b/trunk/arch/arm/mach-realview/core.h index f8f2c0ac4c01..735b57aaf2d6 100644 --- a/trunk/arch/arm/mach-realview/core.h +++ b/trunk/arch/arm/mach-realview/core.h @@ -28,11 +28,21 @@ #include #include -#define APB_DEVICE(name, busid, base, plat) \ -static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat) - -#define AHB_DEVICE(name, busid, base, plat) \ -static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat) +#define AMBA_DEVICE(name,busid,base,plat) \ +static struct amba_device name##_device = { \ + .dev = { \ + .coherent_dma_mask = ~0, \ + .init_name = busid, \ + .platform_data = plat, \ + }, \ + .res = { \ + .start = REALVIEW_##base##_BASE, \ + .end = (REALVIEW_##base##_BASE) + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + .dma_mask = ~0, \ + .irq = base##_IRQ, \ +} struct machine_desc; diff --git a/trunk/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/trunk/arch/arm/mach-realview/include/mach/irqs-pb1176.h index 708f84156f2c..5c3c625e3e04 100644 --- a/trunk/arch/arm/mach-realview/include/mach/irqs-pb1176.h +++ b/trunk/arch/arm/mach-realview/include/mach/irqs-pb1176.h @@ -40,7 +40,6 @@ #define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) #define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) #define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ -#define IRQ_DC1176_GPIO0 (IRQ_DC1176_GIC_START + 16) #define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */ #define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ #define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ @@ -74,6 +73,7 @@ #define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ #define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ +#define IRQ_PB1176_GPIO0 -1 #define IRQ_PB1176_SCTL -1 #define NR_GIC_PB1176 2 diff --git a/trunk/arch/arm/mach-realview/include/mach/system.h b/trunk/arch/arm/mach-realview/include/mach/system.h new file mode 100644 index 000000000000..471b671159ce --- /dev/null +++ b/trunk/arch/arm/mach-realview/include/mach/system.h @@ -0,0 +1,33 @@ +/* + * arch/arm/mach-realview/include/mach/system.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-realview/realview_eb.c b/trunk/arch/arm/mach-realview/realview_eb.c index 157e1bc6e83c..9578145f2df0 100644 --- a/trunk/arch/arm/mach-realview/realview_eb.c +++ b/trunk/arch/arm/mach-realview/realview_eb.c @@ -135,63 +135,63 @@ static struct pl022_ssp_controller ssp0_plat_data = { /* * These devices are connected via the core APB bridge */ -#define GPIO2_IRQ { IRQ_EB_GPIO2 } -#define GPIO3_IRQ { IRQ_EB_GPIO3 } +#define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ } +#define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_EB_AACI } +#define AACI_IRQ { IRQ_EB_AACI, NO_IRQ } #define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B } -#define KMI0_IRQ { IRQ_EB_KMI0 } -#define KMI1_IRQ { IRQ_EB_KMI1 } +#define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ } +#define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ } /* * These devices are connected directly to the multi-layer AHB switch */ -#define EB_SMC_IRQ { } -#define MPMC_IRQ { } -#define EB_CLCD_IRQ { IRQ_EB_CLCD } -#define DMAC_IRQ { IRQ_EB_DMA } +#define EB_SMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ } +#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ } /* * These devices are connected via the core APB bridge */ -#define SCTL_IRQ { } -#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG } -#define EB_GPIO0_IRQ { IRQ_EB_GPIO0 } -#define GPIO1_IRQ { IRQ_EB_GPIO1 } -#define EB_RTC_IRQ { IRQ_EB_RTC } +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ } +#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ } +#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ } +#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ } /* * These devices are connected via the DMA APB bridge */ -#define SCI_IRQ { IRQ_EB_SCI } -#define EB_UART0_IRQ { IRQ_EB_UART0 } -#define EB_UART1_IRQ { IRQ_EB_UART1 } -#define EB_UART2_IRQ { IRQ_EB_UART2 } -#define EB_UART3_IRQ { IRQ_EB_UART3 } -#define EB_SSP_IRQ { IRQ_EB_SSP } +#define SCI_IRQ { IRQ_EB_SCI, NO_IRQ } +#define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ } +#define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ } +#define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ } +#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ } +#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ } /* FPGA Primecells */ -APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); -APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL); +AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL); /* DevChip Primecells */ -AHB_DEVICE(smc, "dev:smc", EB_SMC, NULL); -AHB_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data); -AHB_DEVICE(dmac, "dev:dmac", DMAC, NULL); -AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); -APB_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL); -APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data); -APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -APB_DEVICE(rtc, "dev:rtc", EB_RTC, NULL); -APB_DEVICE(sci0, "dev:sci0", SCI, NULL); -APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); -APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); -APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); -APB_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data); +AMBA_DEVICE(smc, "dev:smc", EB_SMC, NULL); +AMBA_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data); +AMBA_DEVICE(dmac, "dev:dmac", DMAC, NULL); +AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data); +AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +AMBA_DEVICE(rtc, "dev:rtc", EB_RTC, NULL); +AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); +AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); +AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/trunk/arch/arm/mach-realview/realview_pb1176.c b/trunk/arch/arm/mach-realview/realview_pb1176.c index b1d7cafa1a6d..e4abe94fb11a 100644 --- a/trunk/arch/arm/mach-realview/realview_pb1176.c +++ b/trunk/arch/arm/mach-realview/realview_pb1176.c @@ -132,50 +132,50 @@ static struct pl022_ssp_controller ssp0_plat_data = { /* * RealView PB1176 AMBA devices */ -#define GPIO2_IRQ { IRQ_PB1176_GPIO2 } -#define GPIO3_IRQ { IRQ_PB1176_GPIO3 } -#define AACI_IRQ { IRQ_PB1176_AACI } +#define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ } +#define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ } +#define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ } #define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B } -#define KMI0_IRQ { IRQ_PB1176_KMI0 } -#define KMI1_IRQ { IRQ_PB1176_KMI1 } -#define PB1176_SMC_IRQ { } -#define MPMC_IRQ { } -#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD } -#define SCTL_IRQ { } -#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG } -#define PB1176_GPIO0_IRQ { IRQ_DC1176_GPIO0 } -#define GPIO1_IRQ { IRQ_PB1176_GPIO1 } -#define PB1176_RTC_IRQ { IRQ_DC1176_RTC } -#define SCI_IRQ { IRQ_PB1176_SCI } -#define PB1176_UART0_IRQ { IRQ_DC1176_UART0 } -#define PB1176_UART1_IRQ { IRQ_DC1176_UART1 } -#define PB1176_UART2_IRQ { IRQ_DC1176_UART2 } -#define PB1176_UART3_IRQ { IRQ_DC1176_UART3 } -#define PB1176_UART4_IRQ { IRQ_PB1176_UART4 } -#define PB1176_SSP_IRQ { IRQ_DC1176_SSP } +#define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ } +#define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ } +#define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ } +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ } +#define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ } +#define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ } +#define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ } +#define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ } +#define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ } +#define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ } +#define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ } +#define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ } +#define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ } +#define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ } /* FPGA Primecells */ -APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); -APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -APB_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL); +AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +AMBA_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL); /* DevChip Primecells */ -AHB_DEVICE(smc, "dev:smc", PB1176_SMC, NULL); -AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); -APB_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL); -APB_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data); -APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -APB_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL); -APB_DEVICE(sci0, "dev:sci0", SCI, NULL); -APB_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL); -APB_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL); -APB_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL); -APB_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL); -APB_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data); -AHB_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data); +AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL); +AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data); +AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +AMBA_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL); +AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL); +AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL); +AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL); +AMBA_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data); +AMBA_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data); static struct amba_device *amba_devs[] __initdata = { &uart0_device, diff --git a/trunk/arch/arm/mach-realview/realview_pb11mp.c b/trunk/arch/arm/mach-realview/realview_pb11mp.c index ae7fe54f6eb6..2147335f66f5 100644 --- a/trunk/arch/arm/mach-realview/realview_pb11mp.c +++ b/trunk/arch/arm/mach-realview/realview_pb11mp.c @@ -127,52 +127,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PB11MPCore AMBA devices */ -#define GPIO2_IRQ { IRQ_PB11MP_GPIO2 } -#define GPIO3_IRQ { IRQ_PB11MP_GPIO3 } -#define AACI_IRQ { IRQ_TC11MP_AACI } +#define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ } +#define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ } +#define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ } #define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B } -#define KMI0_IRQ { IRQ_TC11MP_KMI0 } -#define KMI1_IRQ { IRQ_TC11MP_KMI1 } -#define PB11MP_SMC_IRQ { } -#define MPMC_IRQ { } -#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD } -#define DMAC_IRQ { IRQ_PB11MP_DMAC } -#define SCTL_IRQ { } -#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG } -#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0 } -#define GPIO1_IRQ { IRQ_PB11MP_GPIO1 } -#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC } -#define SCI_IRQ { IRQ_PB11MP_SCI } -#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0 } -#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1 } -#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2 } -#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3 } -#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP } +#define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ } +#define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ } +#define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ } +#define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ } +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ } +#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ } +#define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ } +#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ } +#define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ } +#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ } +#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ } +#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ } +#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ } +#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ } /* FPGA Primecells */ -APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); -APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -APB_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL); +AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +AMBA_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL); /* DevChip Primecells */ -AHB_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL); -AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); -APB_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL); -APB_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data); -APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -APB_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL); -APB_DEVICE(sci0, "dev:sci0", SCI, NULL); -APB_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); -APB_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); -APB_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); -APB_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data); +AMBA_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL); +AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data); +AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +AMBA_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL); +AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); +AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); +AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AHB_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); -AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); +AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/trunk/arch/arm/mach-realview/realview_pba8.c b/trunk/arch/arm/mach-realview/realview_pba8.c index 59650174e6ed..25b2e59296f8 100644 --- a/trunk/arch/arm/mach-realview/realview_pba8.c +++ b/trunk/arch/arm/mach-realview/realview_pba8.c @@ -122,52 +122,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PBA8Core AMBA devices */ -#define GPIO2_IRQ { IRQ_PBA8_GPIO2 } -#define GPIO3_IRQ { IRQ_PBA8_GPIO3 } -#define AACI_IRQ { IRQ_PBA8_AACI } +#define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ } +#define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ } +#define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ } #define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B } -#define KMI0_IRQ { IRQ_PBA8_KMI0 } -#define KMI1_IRQ { IRQ_PBA8_KMI1 } -#define PBA8_SMC_IRQ { } -#define MPMC_IRQ { } -#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD } -#define DMAC_IRQ { IRQ_PBA8_DMAC } -#define SCTL_IRQ { } -#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG } -#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0 } -#define GPIO1_IRQ { IRQ_PBA8_GPIO1 } -#define PBA8_RTC_IRQ { IRQ_PBA8_RTC } -#define SCI_IRQ { IRQ_PBA8_SCI } -#define PBA8_UART0_IRQ { IRQ_PBA8_UART0 } -#define PBA8_UART1_IRQ { IRQ_PBA8_UART1 } -#define PBA8_UART2_IRQ { IRQ_PBA8_UART2 } -#define PBA8_UART3_IRQ { IRQ_PBA8_UART3 } -#define PBA8_SSP_IRQ { IRQ_PBA8_SSP } +#define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ } +#define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ } +#define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ } +#define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ } +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ } +#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ } +#define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ } +#define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ } +#define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ } +#define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ } +#define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ } +#define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ } +#define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ } +#define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ } /* FPGA Primecells */ -APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); -APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -APB_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL); +AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +AMBA_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL); /* DevChip Primecells */ -AHB_DEVICE(smc, "dev:smc", PBA8_SMC, NULL); -AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); -APB_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL); -APB_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data); -APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -APB_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL); -APB_DEVICE(sci0, "dev:sci0", SCI, NULL); -APB_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); -APB_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); -APB_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); -APB_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data); +AMBA_DEVICE(smc, "dev:smc", PBA8_SMC, NULL); +AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data); +AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +AMBA_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL); +AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); +AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); +AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AHB_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); -AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); +AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/trunk/arch/arm/mach-realview/realview_pbx.c b/trunk/arch/arm/mach-realview/realview_pbx.c index 1cd9956f5875..ac715645b860 100644 --- a/trunk/arch/arm/mach-realview/realview_pbx.c +++ b/trunk/arch/arm/mach-realview/realview_pbx.c @@ -144,52 +144,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PBXCore AMBA devices */ -#define GPIO2_IRQ { IRQ_PBX_GPIO2 } -#define GPIO3_IRQ { IRQ_PBX_GPIO3 } -#define AACI_IRQ { IRQ_PBX_AACI } +#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ } +#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ } +#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ } #define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B } -#define KMI0_IRQ { IRQ_PBX_KMI0 } -#define KMI1_IRQ { IRQ_PBX_KMI1 } -#define PBX_SMC_IRQ { } -#define MPMC_IRQ { } -#define PBX_CLCD_IRQ { IRQ_PBX_CLCD } -#define DMAC_IRQ { IRQ_PBX_DMAC } -#define SCTL_IRQ { } -#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG } -#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0 } -#define GPIO1_IRQ { IRQ_PBX_GPIO1 } -#define PBX_RTC_IRQ { IRQ_PBX_RTC } -#define SCI_IRQ { IRQ_PBX_SCI } -#define PBX_UART0_IRQ { IRQ_PBX_UART0 } -#define PBX_UART1_IRQ { IRQ_PBX_UART1 } -#define PBX_UART2_IRQ { IRQ_PBX_UART2 } -#define PBX_UART3_IRQ { IRQ_PBX_UART3 } -#define PBX_SSP_IRQ { IRQ_PBX_SSP } +#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ } +#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ } +#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ } +#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ } +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ } +#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ } +#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ } +#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ } +#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ } +#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ } +#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ } +#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ } +#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ } +#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ } /* FPGA Primecells */ -APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); -APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -APB_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL); +AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +AMBA_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL); /* DevChip Primecells */ -AHB_DEVICE(smc, "dev:smc", PBX_SMC, NULL); -AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); -APB_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL); -APB_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data); -APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -APB_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL); -APB_DEVICE(sci0, "dev:sci0", SCI, NULL); -APB_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL); -APB_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL); -APB_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL); -APB_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data); +AMBA_DEVICE(smc, "dev:smc", PBX_SMC, NULL); +AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data); +AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +AMBA_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL); +AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL); +AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL); +AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AHB_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data); -AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data); +AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/trunk/arch/arm/mach-rpc/include/mach/system.h b/trunk/arch/arm/mach-rpc/include/mach/system.h new file mode 100644 index 000000000000..359bab94b6af --- /dev/null +++ b/trunk/arch/arm/mach-rpc/include/mach/system.h @@ -0,0 +1,13 @@ +/* + * arch/arm/mach-rpc/include/mach/system.h + * + * Copyright (C) 1996-1999 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +static inline void arch_idle(void) +{ + cpu_do_idle(); +} diff --git a/trunk/arch/arm/mach-s3c2410/include/mach/system.h b/trunk/arch/arm/mach-s3c2410/include/mach/system.h new file mode 100644 index 000000000000..5e215c1a5c8f --- /dev/null +++ b/trunk/arch/arm/mach-s3c2410/include/mach/system.h @@ -0,0 +1,54 @@ +/* arch/arm/mach-s3c2410/include/mach/system.h + * + * Copyright (c) 2003 Simtec Electronics + * Ben Dooks + * + * S3C2410 - System function defines and includes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include + +#include +#include + +#include + +void (*s3c24xx_idle)(void); + +void s3c24xx_default_idle(void) +{ + unsigned long tmp; + int i; + + /* idle the system by using the idle mode which will wait for an + * interrupt to happen before restarting the system. + */ + + /* Warning: going into idle state upsets jtag scanning */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); + + /* the samsung port seems to do a loop and then unset idle.. */ + for (i = 0; i < 50; i++) { + tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ + } + + /* this bit is not cleared on re-start... */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); +} + +static void arch_idle(void) +{ + if (s3c24xx_idle != NULL) + (s3c24xx_idle)(); + else + s3c24xx_default_idle(); +} diff --git a/trunk/arch/arm/mach-s3c2412/s3c2412.c b/trunk/arch/arm/mach-s3c2412/s3c2412.c index c6eac9871093..aff6e85a97c6 100644 --- a/trunk/arch/arm/mach-s3c2412/s3c2412.c +++ b/trunk/arch/arm/mach-s3c2412/s3c2412.c @@ -32,6 +32,8 @@ #include #include +#include + #include #include @@ -162,7 +164,7 @@ void __init s3c2412_map_io(void) /* set our idle function */ - arm_pm_idle = s3c2412_idle; + s3c24xx_idle = s3c2412_idle; /* register our io-tables */ diff --git a/trunk/arch/arm/mach-s3c2416/s3c2416.c b/trunk/arch/arm/mach-s3c2416/s3c2416.c index 08bb0355159d..5287d2808d3e 100644 --- a/trunk/arch/arm/mach-s3c2416/s3c2416.c +++ b/trunk/arch/arm/mach-s3c2416/s3c2416.c @@ -44,6 +44,7 @@ #include #include +#include #include #include @@ -87,6 +88,8 @@ int __init s3c2416_init(void) { printk(KERN_INFO "S3C2416: Initializing architecture\n"); + /* s3c24xx_idle = s3c2416_idle; */ + /* change WDT IRQ number */ s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; diff --git a/trunk/arch/arm/mach-s3c64xx/include/mach/system.h b/trunk/arch/arm/mach-s3c64xx/include/mach/system.h new file mode 100644 index 000000000000..353ed4389ae7 --- /dev/null +++ b/trunk/arch/arm/mach-s3c64xx/include/mach/system.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/system.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * S3C6400 - system implementation + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +static void arch_idle(void) +{ + /* nothing here yet */ +} + +#endif /* __ASM_ARCH_IRQ_H */ diff --git a/trunk/arch/arm/mach-s5p64x0/common.c b/trunk/arch/arm/mach-s5p64x0/common.c index 9143f8b19962..52b89a376447 100644 --- a/trunk/arch/arm/mach-s5p64x0/common.c +++ b/trunk/arch/arm/mach-s5p64x0/common.c @@ -146,12 +146,15 @@ static void s5p64x0_idle(void) { unsigned long val; - val = __raw_readl(S5P64X0_PWR_CFG); - val &= ~(0x3 << 5); - val |= (0x1 << 5); - __raw_writel(val, S5P64X0_PWR_CFG); + if (!need_resched()) { + val = __raw_readl(S5P64X0_PWR_CFG); + val &= ~(0x3 << 5); + val |= (0x1 << 5); + __raw_writel(val, S5P64X0_PWR_CFG); - cpu_do_idle(); + cpu_do_idle(); + } + local_irq_enable(); } /* @@ -283,7 +286,7 @@ int __init s5p64x0_init(void) printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n"); /* set idle function */ - arm_pm_idle = s5p64x0_idle; + pm_idle = s5p64x0_idle; return device_register(&s5p64x0_dev); } diff --git a/trunk/arch/arm/mach-s5p64x0/dma.c b/trunk/arch/arm/mach-s5p64x0/dma.c index f7f68ad77910..f820c0744405 100644 --- a/trunk/arch/arm/mach-s5p64x0/dma.c +++ b/trunk/arch/arm/mach-s5p64x0/dma.c @@ -108,22 +108,34 @@ struct dma_pl330_platdata s5p6450_pdma_pdata = { .peri_id = s5p6450_pdma_peri, }; -AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, S5P64X0_PA_PDMA, - {IRQ_DMA0}, NULL); +struct amba_device s5p64x0_device_pdma = { + .dev = { + .init_name = "dma-pl330", + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .res = { + .start = S5P64X0_PA_PDMA, + .end = S5P64X0_PA_PDMA + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DMA0, NO_IRQ}, + .periphid = 0x00041330, +}; static int __init s5p64x0_dma_init(void) { if (soc_is_s5p6450()) { dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask); - s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata; + s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; } else { dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask); - s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata; + s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; } - amba_device_register(&s5p64x0_pdma_device, &iomem_resource); + amba_device_register(&s5p64x0_device_pdma, &iomem_resource); return 0; } diff --git a/trunk/arch/arm/mach-s5p64x0/include/mach/system.h b/trunk/arch/arm/mach-s5p64x0/include/mach/system.h new file mode 100644 index 000000000000..cf26e0954a2f --- /dev/null +++ b/trunk/arch/arm/mach-s5p64x0/include/mach/system.h @@ -0,0 +1,21 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/system.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - system support header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +static void arch_idle(void) +{ + /* nothing here yet */ +} + +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/trunk/arch/arm/mach-s5pc100/common.c b/trunk/arch/arm/mach-s5pc100/common.c index ff71e2d467c6..c9095730a7f5 100644 --- a/trunk/arch/arm/mach-s5pc100/common.c +++ b/trunk/arch/arm/mach-s5pc100/common.c @@ -129,6 +129,14 @@ static struct map_desc s5pc100_iodesc[] __initdata = { } }; +static void s5pc100_idle(void) +{ + if (!need_resched()) + cpu_do_idle(); + + local_irq_enable(); +} + /* * s5pc100_map_io * @@ -202,6 +210,10 @@ core_initcall(s5pc100_core_init); int __init s5pc100_init(void) { printk(KERN_INFO "S5PC100: Initializing architecture\n"); + + /* set idle function */ + pm_idle = s5pc100_idle; + return device_register(&s5pc100_dev); } diff --git a/trunk/arch/arm/mach-s5pc100/dma.c b/trunk/arch/arm/mach-s5pc100/dma.c index 96b1ab3dcd48..c841f4d313f2 100644 --- a/trunk/arch/arm/mach-s5pc100/dma.c +++ b/trunk/arch/arm/mach-s5pc100/dma.c @@ -73,8 +73,21 @@ struct dma_pl330_platdata s5pc100_pdma0_pdata = { .peri_id = pdma0_peri, }; -AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330, S5PC100_PA_PDMA0, - {IRQ_PDMA0}, &s5pc100_pdma0_pdata); +struct amba_device s5pc100_device_pdma0 = { + .dev = { + .init_name = "dma-pl330.0", + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pc100_pdma0_pdata, + }, + .res = { + .start = S5PC100_PA_PDMA0, + .end = S5PC100_PA_PDMA0 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA0, NO_IRQ}, + .periphid = 0x00041330, +}; u8 pdma1_peri[] = { DMACH_UART0_RX, @@ -114,18 +127,31 @@ struct dma_pl330_platdata s5pc100_pdma1_pdata = { .peri_id = pdma1_peri, }; -AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, S5PC100_PA_PDMA1, - {IRQ_PDMA1}, &s5pc100_pdma1_pdata); +struct amba_device s5pc100_device_pdma1 = { + .dev = { + .init_name = "dma-pl330.1", + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pc100_pdma1_pdata, + }, + .res = { + .start = S5PC100_PA_PDMA1, + .end = S5PC100_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA1, NO_IRQ}, + .periphid = 0x00041330, +}; static int __init s5pc100_dma_init(void) { dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask); - amba_device_register(&s5pc100_pdma0_device, &iomem_resource); + amba_device_register(&s5pc100_device_pdma0, &iomem_resource); dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask); - amba_device_register(&s5pc100_pdma1_device, &iomem_resource); + amba_device_register(&s5pc100_device_pdma1, &iomem_resource); return 0; } diff --git a/trunk/arch/arm/mach-s5pc100/include/mach/system.h b/trunk/arch/arm/mach-s5pc100/include/mach/system.h new file mode 100644 index 000000000000..afc96c298518 --- /dev/null +++ b/trunk/arch/arm/mach-s5pc100/include/mach/system.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-s5pc100/include/mach/system.h + * + * Copyright 2009 Samsung Electronics Co. + * Byungho Min + * + * S5PC100 - system implementation + * + * Based on mach-s3c6400/include/mach/system.h + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +static void arch_idle(void) +{ + /* nothing here yet */ +} + +#endif /* __ASM_ARCH_IRQ_H */ diff --git a/trunk/arch/arm/mach-s5pv210/common.c b/trunk/arch/arm/mach-s5pv210/common.c index 4c9e9027df9a..9c1bcdcc12c3 100644 --- a/trunk/arch/arm/mach-s5pv210/common.c +++ b/trunk/arch/arm/mach-s5pv210/common.c @@ -142,6 +142,14 @@ static struct map_desc s5pv210_iodesc[] __initdata = { } }; +static void s5pv210_idle(void) +{ + if (!need_resched()) + cpu_do_idle(); + + local_irq_enable(); +} + void s5pv210_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -239,6 +247,10 @@ core_initcall(s5pv210_core_init); int __init s5pv210_init(void) { printk(KERN_INFO "S5PV210: Initializing architecture\n"); + + /* set idle function */ + pm_idle = s5pv210_idle; + return device_register(&s5pv210_dev); } diff --git a/trunk/arch/arm/mach-s5pv210/dma.c b/trunk/arch/arm/mach-s5pv210/dma.c index f6885d247d14..a6113e0267f2 100644 --- a/trunk/arch/arm/mach-s5pv210/dma.c +++ b/trunk/arch/arm/mach-s5pv210/dma.c @@ -71,8 +71,21 @@ struct dma_pl330_platdata s5pv210_pdma0_pdata = { .peri_id = pdma0_peri, }; -AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, S5PV210_PA_PDMA0, - {IRQ_PDMA0}, &s5pv210_pdma0_pdata); +struct amba_device s5pv210_device_pdma0 = { + .dev = { + .init_name = "dma-pl330.0", + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pv210_pdma0_pdata, + }, + .res = { + .start = S5PV210_PA_PDMA0, + .end = S5PV210_PA_PDMA0 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA0, NO_IRQ}, + .periphid = 0x00041330, +}; u8 pdma1_peri[] = { DMACH_UART0_RX, @@ -114,18 +127,31 @@ struct dma_pl330_platdata s5pv210_pdma1_pdata = { .peri_id = pdma1_peri, }; -AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, S5PV210_PA_PDMA1, - {IRQ_PDMA1}, &s5pv210_pdma1_pdata); +struct amba_device s5pv210_device_pdma1 = { + .dev = { + .init_name = "dma-pl330.1", + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pv210_pdma1_pdata, + }, + .res = { + .start = S5PV210_PA_PDMA1, + .end = S5PV210_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA1, NO_IRQ}, + .periphid = 0x00041330, +}; static int __init s5pv210_dma_init(void) { dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask); - amba_device_register(&s5pv210_pdma0_device, &iomem_resource); + amba_device_register(&s5pv210_device_pdma0, &iomem_resource); dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask); - amba_device_register(&s5pv210_pdma1_device, &iomem_resource); + amba_device_register(&s5pv210_device_pdma1, &iomem_resource); return 0; } diff --git a/trunk/arch/arm/mach-s5pv210/include/mach/system.h b/trunk/arch/arm/mach-s5pv210/include/mach/system.h new file mode 100644 index 000000000000..bf288ced860a --- /dev/null +++ b/trunk/arch/arm/mach-s5pv210/include/mach/system.h @@ -0,0 +1,21 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/system.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - system support header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +static void arch_idle(void) +{ + /* nothing here yet */ +} + +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/trunk/arch/arm/mach-sa1100/include/mach/system.h b/trunk/arch/arm/mach-sa1100/include/mach/system.h new file mode 100644 index 000000000000..e17b208f76d4 --- /dev/null +++ b/trunk/arch/arm/mach-sa1100/include/mach/system.h @@ -0,0 +1,9 @@ +/* + * arch/arm/mach-sa1100/include/mach/system.h + * + * Copyright (c) 1999 Nicolas Pitre + */ +static inline void arch_idle(void) +{ + cpu_do_idle(); +} diff --git a/trunk/arch/arm/mach-shark/core.c b/trunk/arch/arm/mach-shark/core.c index 6a2a7f2c2557..a851c254ad6c 100644 --- a/trunk/arch/arm/mach-shark/core.c +++ b/trunk/arch/arm/mach-shark/core.c @@ -149,16 +149,10 @@ static struct sys_timer shark_timer = { .init = shark_timer_init, }; -static void shark_init_early(void) -{ - disable_hlt(); -} - MACHINE_START(SHARK, "Shark") /* Maintainer: Alexander Schulz */ .atag_offset = 0x3000, .map_io = shark_map_io, - .init_early = shark_init_early, .init_irq = shark_init_irq, .timer = &shark_timer, .dma_zone_size = SZ_4M, diff --git a/trunk/arch/arm/mach-shark/include/mach/system.h b/trunk/arch/arm/mach-shark/include/mach/system.h new file mode 100644 index 000000000000..1b2f2c5050a8 --- /dev/null +++ b/trunk/arch/arm/mach-shark/include/mach/system.h @@ -0,0 +1,13 @@ +/* + * arch/arm/mach-shark/include/mach/system.h + * + * by Alexander Schulz + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ +} + +#endif diff --git a/trunk/arch/arm/mach-shmobile/include/mach/system.h b/trunk/arch/arm/mach-shmobile/include/mach/system.h index 3bbcb3fa0775..956ac18ddbf9 100644 --- a/trunk/arch/arm/mach-shmobile/include/mach/system.h +++ b/trunk/arch/arm/mach-shmobile/include/mach/system.h @@ -1,6 +1,11 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + static inline void arch_reset(char mode, const char *cmd) { soft_restart(0); diff --git a/trunk/arch/arm/mach-spear3xx/include/mach/system.h b/trunk/arch/arm/mach-spear3xx/include/mach/system.h new file mode 100644 index 000000000000..92cee6335c90 --- /dev/null +++ b/trunk/arch/arm/mach-spear3xx/include/mach/system.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/system.h + * + * SPEAr3xx Machine family specific architecture functions + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SYSTEM_H +#define __MACH_SYSTEM_H + +#include + +#endif /* __MACH_SYSTEM_H */ diff --git a/trunk/arch/arm/mach-spear3xx/spear300.c b/trunk/arch/arm/mach-spear3xx/spear300.c index 9da50e281e98..a5e46b4ade20 100644 --- a/trunk/arch/arm/mach-spear3xx/spear300.c +++ b/trunk/arch/arm/mach-spear3xx/spear300.c @@ -430,8 +430,18 @@ static struct pl061_platform_data gpio1_plat_data = { .irq_base = SPEAR300_GPIO1_INT_BASE, }; -AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE, - {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data); +struct amba_device spear300_gpio1_device = { + .dev = { + .init_name = "gpio1", + .platform_data = &gpio1_plat_data, + }, + .res = { + .start = SPEAR300_GPIO_BASE, + .end = SPEAR300_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ}, +}; /* spear300 routines */ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, diff --git a/trunk/arch/arm/mach-spear3xx/spear3xx.c b/trunk/arch/arm/mach-spear3xx/spear3xx.c index b1733c37f209..10af45da86a0 100644 --- a/trunk/arch/arm/mach-spear3xx/spear3xx.c +++ b/trunk/arch/arm/mach-spear3xx/spear3xx.c @@ -28,12 +28,31 @@ static struct pl061_platform_data gpio_plat_data = { .irq_base = SPEAR3XX_GPIO_INT_BASE, }; -AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE, - {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data); +struct amba_device spear3xx_gpio_device = { + .dev = { + .init_name = "gpio", + .platform_data = &gpio_plat_data, + }, + .res = { + .start = SPEAR3XX_ICM3_GPIO_BASE, + .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ}, +}; /* uart device registration */ -AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE, - {SPEAR3XX_IRQ_UART}, NULL); +struct amba_device spear3xx_uart_device = { + .dev = { + .init_name = "uart", + }, + .res = { + .start = SPEAR3XX_ICM1_UART_BASE, + .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {SPEAR3XX_IRQ_UART, NO_IRQ}, +}; /* Do spear3xx familiy common initialization part here */ void __init spear3xx_init(void) diff --git a/trunk/arch/arm/mach-spear6xx/include/mach/system.h b/trunk/arch/arm/mach-spear6xx/include/mach/system.h new file mode 100644 index 000000000000..0b1d2be81cfb --- /dev/null +++ b/trunk/arch/arm/mach-spear6xx/include/mach/system.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/system.h + * + * SPEAr6xx Machine family specific architecture functions + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SYSTEM_H +#define __MACH_SYSTEM_H + +#include + +#endif /* __MACH_SYSTEM_H */ diff --git a/trunk/arch/arm/mach-spear6xx/spear6xx.c b/trunk/arch/arm/mach-spear6xx/spear6xx.c index b997b1b10ba0..e0f6628c8b2c 100644 --- a/trunk/arch/arm/mach-spear6xx/spear6xx.c +++ b/trunk/arch/arm/mach-spear6xx/spear6xx.c @@ -34,7 +34,7 @@ struct amba_device uart_device[] = { .end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_UART_0}, + .irq = {IRQ_UART_0, NO_IRQ}, }, { .dev = { .init_name = "uart1", @@ -44,7 +44,7 @@ struct amba_device uart_device[] = { .end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_UART_1}, + .irq = {IRQ_UART_1, NO_IRQ}, } }; @@ -73,7 +73,7 @@ struct amba_device gpio_device[] = { .end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_LOCAL_GPIO}, + .irq = {IRQ_LOCAL_GPIO, NO_IRQ}, }, { .dev = { .init_name = "gpio1", @@ -84,7 +84,7 @@ struct amba_device gpio_device[] = { .end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_BASIC_GPIO}, + .irq = {IRQ_BASIC_GPIO, NO_IRQ}, }, { .dev = { .init_name = "gpio2", @@ -95,7 +95,7 @@ struct amba_device gpio_device[] = { .end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_APPL_GPIO}, + .irq = {IRQ_APPL_GPIO, NO_IRQ}, } }; diff --git a/trunk/arch/arm/mach-tegra/common.c b/trunk/arch/arm/mach-tegra/common.c index 2db20da1d585..a2eb90169aed 100644 --- a/trunk/arch/arm/mach-tegra/common.c +++ b/trunk/arch/arm/mach-tegra/common.c @@ -27,6 +27,7 @@ #include #include +#include #include "board.h" #include "clock.h" @@ -95,8 +96,6 @@ static void __init tegra_init_cache(u32 tag_latency, u32 data_latency) #ifdef CONFIG_ARCH_TEGRA_2x_SOC void __init tegra20_init_early(void) { - disable_hlt(); /* idle WFI usage needs to be confirmed */ - tegra_init_fuse(); tegra2_init_clocks(); tegra_clk_init_from_table(tegra20_clk_init_table); diff --git a/trunk/arch/arm/mach-tegra/include/mach/system.h b/trunk/arch/arm/mach-tegra/include/mach/system.h new file mode 100644 index 000000000000..a312988bf6f8 --- /dev/null +++ b/trunk/arch/arm/mach-tegra/include/mach/system.h @@ -0,0 +1,28 @@ +/* + * arch/arm/mach-tegra/include/mach/system.h + * + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Colin Cross + * Erik Gilling + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MACH_TEGRA_SYSTEM_H +#define __MACH_TEGRA_SYSTEM_H + +static inline void arch_idle(void) +{ +} + +#endif diff --git a/trunk/arch/arm/mach-u300/core.c b/trunk/arch/arm/mach-u300/core.c index b9865605da09..b4c6926a700c 100644 --- a/trunk/arch/arm/mach-u300/core.c +++ b/trunk/arch/arm/mach-u300/core.c @@ -94,9 +94,19 @@ static struct amba_pl011_data uart0_plat_data = { #endif }; -/* Slow device at 0x3000 offset */ -static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE, - { IRQ_U300_UART0 }, &uart0_plat_data); +static struct amba_device uart0_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "uart0", /* Slow device at 0x3000 offset */ + .platform_data = &uart0_plat_data, + }, + .res = { + .start = U300_UART0_BASE, + .end = U300_UART0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_U300_UART0, NO_IRQ }, +}; /* The U335 have an additional UART1 on the APP CPU */ #ifdef CONFIG_MACH_U300_BS335 @@ -108,28 +118,71 @@ static struct amba_pl011_data uart1_plat_data = { #endif }; -/* Fast device at 0x7000 offset */ -static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE, - { IRQ_U300_UART1 }, &uart1_plat_data); +static struct amba_device uart1_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "uart1", /* Fast device at 0x7000 offset */ + .platform_data = &uart1_plat_data, + }, + .res = { + .start = U300_UART1_BASE, + .end = U300_UART1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { IRQ_U300_UART1, NO_IRQ }, +}; #endif -/* AHB device at 0x4000 offset */ -static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL); +static struct amba_device pl172_device = { + .dev = { + .init_name = "pl172", /* AHB device at 0x4000 offset */ + .platform_data = NULL, + }, + .res = { + .start = U300_EMIF_CFG_BASE, + .end = U300_EMIF_CFG_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; /* * Everything within this next ifdef deals with external devices connected to * the APP SPI bus. */ -/* Fast device at 0x6000 offset */ -static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE, - { IRQ_U300_SPI }, NULL); - -/* Fast device at 0x1000 offset */ -#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 } +static struct amba_device pl022_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "pl022", /* Fast device at 0x6000 offset */ + }, + .res = { + .start = U300_SPI_BASE, + .end = U300_SPI_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_U300_SPI, NO_IRQ }, + /* + * This device has a DMA channel but the Linux driver does not use + * it currently. + */ +}; -static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE, - U300_MMCSD_IRQS, NULL); +static struct amba_device mmcsd_device = { + .dev = { + .init_name = "mmci", /* Fast device at 0x1000 offset */ + .platform_data = NULL, /* Added later */ + }, + .res = { + .start = U300_MMCSD_BASE, + .end = U300_MMCSD_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }, + /* + * This device has a DMA channel but the Linux driver does not use + * it currently. + */ +}; /* * The order of device declaration may be important, since some devices diff --git a/trunk/arch/arm/mach-u300/include/mach/system.h b/trunk/arch/arm/mach-u300/include/mach/system.h new file mode 100644 index 000000000000..574d46e38290 --- /dev/null +++ b/trunk/arch/arm/mach-u300/include/mach/system.h @@ -0,0 +1,14 @@ +/* + * + * arch/arm/mach-u300/include/mach/system.h + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * System shutdown and reset functions. + * Author: Linus Walleij + */ +static inline void arch_idle(void) +{ + cpu_do_idle(); +} diff --git a/trunk/arch/arm/mach-ux500/devices-common.c b/trunk/arch/arm/mach-ux500/devices-common.c index 898a64517b09..c563e5418d80 100644 --- a/trunk/arch/arm/mach-ux500/devices-common.c +++ b/trunk/arch/arm/mach-ux500/devices-common.c @@ -26,22 +26,29 @@ dbx500_add_amba_device(const char *name, resource_size_t base, struct amba_device *dev; int ret; - dev = amba_device_alloc(name, base, SZ_4K); + dev = kzalloc(sizeof *dev, GFP_KERNEL); if (!dev) return ERR_PTR(-ENOMEM); + dev->dev.init_name = name; + + dev->res.start = base; + dev->res.end = base + SZ_4K - 1; + dev->res.flags = IORESOURCE_MEM; + dev->dma_mask = DMA_BIT_MASK(32); dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); dev->irq[0] = irq; + dev->irq[1] = NO_IRQ; dev->periphid = periphid; dev->dev.platform_data = pdata; - ret = amba_device_add(dev, &iomem_resource); + ret = amba_device_register(dev, &iomem_resource); if (ret) { - amba_device_put(dev); + kfree(dev); return ERR_PTR(ret); } diff --git a/trunk/arch/arm/mach-ux500/include/mach/system.h b/trunk/arch/arm/mach-ux500/include/mach/system.h new file mode 100644 index 000000000000..258e5c919c24 --- /dev/null +++ b/trunk/arch/arm/mach-ux500/include/mach/system.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2009 ST-Ericsson. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-versatile/core.c b/trunk/arch/arm/mach-versatile/core.c index 4f352e45be0a..02b7b9303f3b 100644 --- a/trunk/arch/arm/mach-versatile/core.c +++ b/trunk/arch/arm/mach-versatile/core.c @@ -582,58 +582,58 @@ static struct pl022_ssp_controller ssp0_plat_data = { .num_chipselect = 1, }; -#define AACI_IRQ { IRQ_AACI } +#define AACI_IRQ { IRQ_AACI, NO_IRQ } #define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B } -#define KMI0_IRQ { IRQ_SIC_KMI0 } -#define KMI1_IRQ { IRQ_SIC_KMI1 } +#define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ } +#define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ } /* * These devices are connected directly to the multi-layer AHB switch */ -#define SMC_IRQ { } -#define MPMC_IRQ { } -#define CLCD_IRQ { IRQ_CLCDINT } -#define DMAC_IRQ { IRQ_DMAINT } +#define SMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ } +#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ } /* * These devices are connected via the core APB bridge */ -#define SCTL_IRQ { } -#define WATCHDOG_IRQ { IRQ_WDOGINT } -#define GPIO0_IRQ { IRQ_GPIOINT0 } -#define GPIO1_IRQ { IRQ_GPIOINT1 } -#define RTC_IRQ { IRQ_RTCINT } +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ } +#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ } +#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ } +#define RTC_IRQ { IRQ_RTCINT, NO_IRQ } /* * These devices are connected via the DMA APB bridge */ -#define SCI_IRQ { IRQ_SCIINT } -#define UART0_IRQ { IRQ_UARTINT0 } -#define UART1_IRQ { IRQ_UARTINT1 } -#define UART2_IRQ { IRQ_UARTINT2 } -#define SSP_IRQ { IRQ_SSPINT } +#define SCI_IRQ { IRQ_SCIINT, NO_IRQ } +#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ } +#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ } +#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ } +#define SSP_IRQ { IRQ_SSPINT, NO_IRQ } /* FPGA Primecells */ -APB_DEVICE(aaci, "fpga:04", AACI, NULL); -APB_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data); -APB_DEVICE(kmi0, "fpga:06", KMI0, NULL); -APB_DEVICE(kmi1, "fpga:07", KMI1, NULL); +AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); /* DevChip Primecells */ -AHB_DEVICE(smc, "dev:00", SMC, NULL); -AHB_DEVICE(mpmc, "dev:10", MPMC, NULL); -AHB_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); -AHB_DEVICE(dmac, "dev:30", DMAC, NULL); -APB_DEVICE(sctl, "dev:e0", SCTL, NULL); -APB_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); -APB_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data); -APB_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); -APB_DEVICE(rtc, "dev:e8", RTC, NULL); -APB_DEVICE(sci0, "dev:f0", SCI, NULL); -APB_DEVICE(uart0, "dev:f1", UART0, NULL); -APB_DEVICE(uart1, "dev:f2", UART1, NULL); -APB_DEVICE(uart2, "dev:f3", UART2, NULL); -APB_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data); +AMBA_DEVICE(smc, "dev:00", SMC, NULL); +AMBA_DEVICE(mpmc, "dev:10", MPMC, NULL); +AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); +AMBA_DEVICE(dmac, "dev:30", DMAC, NULL); +AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); +AMBA_DEVICE(rtc, "dev:e8", RTC, NULL); +AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); +AMBA_DEVICE(uart1, "dev:f2", UART1, NULL); +AMBA_DEVICE(uart2, "dev:f3", UART2, NULL); +AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/trunk/arch/arm/mach-versatile/core.h b/trunk/arch/arm/mach-versatile/core.h index 683e60776a85..2ef2f555f315 100644 --- a/trunk/arch/arm/mach-versatile/core.h +++ b/trunk/arch/arm/mach-versatile/core.h @@ -36,10 +36,20 @@ extern unsigned int mmc_status(struct device *dev); extern struct of_dev_auxdata versatile_auxdata_lookup[]; #endif -#define APB_DEVICE(name, busid, base, plat) \ -static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat) - -#define AHB_DEVICE(name, busid, base, plat) \ -static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat) +#define AMBA_DEVICE(name,busid,base,plat) \ +static struct amba_device name##_device = { \ + .dev = { \ + .coherent_dma_mask = ~0, \ + .init_name = busid, \ + .platform_data = plat, \ + }, \ + .res = { \ + .start = VERSATILE_##base##_BASE, \ + .end = (VERSATILE_##base##_BASE) + SZ_4K - 1,\ + .flags = IORESOURCE_MEM, \ + }, \ + .dma_mask = ~0, \ + .irq = base##_IRQ, \ +} #endif diff --git a/trunk/arch/arm/mach-versatile/include/mach/system.h b/trunk/arch/arm/mach-versatile/include/mach/system.h new file mode 100644 index 000000000000..f3fa347895f0 --- /dev/null +++ b/trunk/arch/arm/mach-versatile/include/mach/system.h @@ -0,0 +1,33 @@ +/* + * arch/arm/mach-versatile/include/mach/system.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-versatile/versatile_pb.c b/trunk/arch/arm/mach-versatile/versatile_pb.c index 19738331bd3d..9581c197500c 100644 --- a/trunk/arch/arm/mach-versatile/versatile_pb.c +++ b/trunk/arch/arm/mach-versatile/versatile_pb.c @@ -58,28 +58,28 @@ static struct pl061_platform_data gpio3_plat_data = { .irq_base = IRQ_GPIO3_START, }; -#define UART3_IRQ { IRQ_SIC_UART3 } -#define SCI1_IRQ { IRQ_SIC_SCI3 } +#define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ } +#define SCI1_IRQ { IRQ_SIC_SCI3, NO_IRQ } #define MMCI1_IRQ { IRQ_MMCI1A, IRQ_SIC_MMCI1B } /* * These devices are connected via the core APB bridge */ -#define GPIO2_IRQ { IRQ_GPIOINT2 } -#define GPIO3_IRQ { IRQ_GPIOINT3 } +#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ } +#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ } /* * These devices are connected via the DMA APB bridge */ /* FPGA Primecells */ -APB_DEVICE(uart3, "fpga:09", UART3, NULL); -APB_DEVICE(sci1, "fpga:0a", SCI1, NULL); -APB_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data); +AMBA_DEVICE(uart3, "fpga:09", UART3, NULL); +AMBA_DEVICE(sci1, "fpga:0a", SCI1, NULL); +AMBA_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data); /* DevChip Primecells */ -APB_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); -APB_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); +AMBA_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data); static struct amba_device *amba_devs[] __initdata = { &uart3_device, diff --git a/trunk/arch/arm/mach-vexpress/core.h b/trunk/arch/arm/mach-vexpress/core.h index 9f0f2827c711..f4397159c173 100644 --- a/trunk/arch/arm/mach-vexpress/core.h +++ b/trunk/arch/arm/mach-vexpress/core.h @@ -1,2 +1,19 @@ #define __MMIO_P2V(x) (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000) #define MMIO_P2V(x) ((void __iomem *)__MMIO_P2V(x)) + +#define AMBA_DEVICE(name,busid,base,plat) \ +struct amba_device name##_device = { \ + .dev = { \ + .coherent_dma_mask = ~0UL, \ + .init_name = busid, \ + .platform_data = plat, \ + }, \ + .res = { \ + .start = base, \ + .end = base + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + .dma_mask = ~0UL, \ + .irq = IRQ_##base, \ + /* .dma = DMA_##base,*/ \ +} diff --git a/trunk/arch/arm/mach-vexpress/ct-ca9x4.c b/trunk/arch/arm/mach-vexpress/ct-ca9x4.c index 1b1d2e4892b9..b1e87c184e54 100644 --- a/trunk/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/trunk/arch/arm/mach-vexpress/ct-ca9x4.c @@ -109,10 +109,10 @@ static struct clcd_board ct_ca9x4_clcd_data = { .remove = versatile_clcd_remove_dma, }; -static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); -static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL); -static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL); -static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL); +static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); +static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL); +static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL); +static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL); static struct amba_device *ct_ca9x4_amba_devs[] __initdata = { &clcd_device, diff --git a/trunk/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/trunk/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h index a40468f3b938..a34d3d4faae1 100644 --- a/trunk/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h +++ b/trunk/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h @@ -35,7 +35,7 @@ * Interrupts. Those in {} are for AMBA devices */ #define IRQ_CT_CA9X4_CLCDC { 76 } -#define IRQ_CT_CA9X4_DMC { 0 } +#define IRQ_CT_CA9X4_DMC { -1 } #define IRQ_CT_CA9X4_SMC { 77, 78 } #define IRQ_CT_CA9X4_TIMER0 80 #define IRQ_CT_CA9X4_TIMER1 81 diff --git a/trunk/arch/arm/mach-vexpress/include/mach/system.h b/trunk/arch/arm/mach-vexpress/include/mach/system.h new file mode 100644 index 000000000000..f653a8e265bd --- /dev/null +++ b/trunk/arch/arm/mach-vexpress/include/mach/system.h @@ -0,0 +1,33 @@ +/* + * arch/arm/mach-vexpress/include/mach/system.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/mach-vexpress/v2m.c b/trunk/arch/arm/mach-vexpress/v2m.c index ad64f97a2003..b4a28ca0e50a 100644 --- a/trunk/arch/arm/mach-vexpress/v2m.c +++ b/trunk/arch/arm/mach-vexpress/v2m.c @@ -266,16 +266,16 @@ static struct mmci_platform_data v2m_mmci_data = { .status = v2m_mmci_status, }; -static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL); -static AMBA_APB_DEVICE(mmci, "mb:mmci", 0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data); -static AMBA_APB_DEVICE(kmi0, "mb:kmi0", 0, V2M_KMI0, IRQ_V2M_KMI0, NULL); -static AMBA_APB_DEVICE(kmi1, "mb:kmi1", 0, V2M_KMI1, IRQ_V2M_KMI1, NULL); -static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL); -static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL); -static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL); -static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL); -static AMBA_APB_DEVICE(wdt, "mb:wdt", 0, V2M_WDT, IRQ_V2M_WDT, NULL); -static AMBA_APB_DEVICE(rtc, "mb:rtc", 0, V2M_RTC, IRQ_V2M_RTC, NULL); +static AMBA_DEVICE(aaci, "mb:aaci", V2M_AACI, NULL); +static AMBA_DEVICE(mmci, "mb:mmci", V2M_MMCI, &v2m_mmci_data); +static AMBA_DEVICE(kmi0, "mb:kmi0", V2M_KMI0, NULL); +static AMBA_DEVICE(kmi1, "mb:kmi1", V2M_KMI1, NULL); +static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL); +static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL); +static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL); +static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL); +static AMBA_DEVICE(wdt, "mb:wdt", V2M_WDT, NULL); +static AMBA_DEVICE(rtc, "mb:rtc", V2M_RTC, NULL); static struct amba_device *v2m_amba_devs[] __initdata = { &aaci_device, diff --git a/trunk/arch/arm/mach-vt8500/include/mach/system.h b/trunk/arch/arm/mach-vt8500/include/mach/system.h index 58fa8010ee61..d6c757eaf26b 100644 --- a/trunk/arch/arm/mach-vt8500/include/mach/system.h +++ b/trunk/arch/arm/mach-vt8500/include/mach/system.h @@ -7,6 +7,11 @@ /* PM Software Reset request register */ #define VT8500_PMSR_VIRT 0xf8130060 +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + static inline void arch_reset(char mode, const char *cmd) { writel(1, VT8500_PMSR_VIRT); diff --git a/trunk/arch/arm/mach-w90x900/dev.c b/trunk/arch/arm/mach-w90x900/dev.c index db82568a998a..78110befb7a9 100644 --- a/trunk/arch/arm/mach-w90x900/dev.c +++ b/trunk/arch/arm/mach-w90x900/dev.c @@ -530,7 +530,6 @@ static struct platform_device *nuc900_public_dev[] __initdata = { void __init nuc900_board_init(struct platform_device **device, int size) { - disable_hlt(); platform_add_devices(device, size); platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev)); spi_register_board_info(nuc900_spi_board_info, diff --git a/trunk/arch/arm/mach-w90x900/include/mach/system.h b/trunk/arch/arm/mach-w90x900/include/mach/system.h new file mode 100644 index 000000000000..2aaeb9311619 --- /dev/null +++ b/trunk/arch/arm/mach-w90x900/include/mach/system.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-w90x900/include/mach/system.h + * + * Copyright (c) 2008 Nuvoton technology corporation + * All rights reserved. + * + * Wan ZongShun + * + * Based on arch/arm/mach-s3c2410/include/mach/system.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +static void arch_idle(void) +{ +} diff --git a/trunk/arch/arm/mach-zynq/include/mach/system.h b/trunk/arch/arm/mach-zynq/include/mach/system.h new file mode 100644 index 000000000000..8e88e0b8d2ba --- /dev/null +++ b/trunk/arch/arm/mach-zynq/include/mach/system.h @@ -0,0 +1,23 @@ +/* arch/arm/mach-zynq/include/mach/system.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_SYSTEM_H__ +#define __MACH_SYSTEM_H__ + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/plat-mxc/include/mach/system.h b/trunk/arch/arm/plat-mxc/include/mach/system.h new file mode 100644 index 000000000000..13ad0df2e860 --- /dev/null +++ b/trunk/arch/arm/plat-mxc/include/mach/system.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_MXC_SYSTEM_H__ +#define __ASM_ARCH_MXC_SYSTEM_H__ + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/trunk/arch/arm/plat-omap/include/plat/board-ams-delta.h b/trunk/arch/arm/plat-omap/include/plat/board-ams-delta.h index 027e79eead5e..51b102dc906b 100644 --- a/trunk/arch/arm/plat-omap/include/plat/board-ams-delta.h +++ b/trunk/arch/arm/plat-omap/include/plat/board-ams-delta.h @@ -28,6 +28,30 @@ #if defined (CONFIG_MACH_AMS_DELTA) +#define AMS_DELTA_LATCH1_PHYS 0x01000000 +#define AMS_DELTA_LATCH1_VIRT 0xEA000000 +#define AMS_DELTA_MODEM_PHYS 0x04000000 +#define AMS_DELTA_MODEM_VIRT 0xEB000000 +#define AMS_DELTA_LATCH2_PHYS 0x08000000 +#define AMS_DELTA_LATCH2_VIRT 0xEC000000 + +#define AMS_DELTA_LATCH1_LED_CAMERA 0x01 +#define AMS_DELTA_LATCH1_LED_ADVERT 0x02 +#define AMS_DELTA_LATCH1_LED_EMAIL 0x04 +#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08 +#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10 +#define AMS_DELTA_LATCH1_LED_VOICE 0x20 + +#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 +#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 +#define AMS_DELTA_LATCH2_NAND_NCE 0x0004 +#define AMS_DELTA_LATCH2_NAND_NRE 0x0008 +#define AMS_DELTA_LATCH2_NAND_NWP 0x0010 +#define AMS_DELTA_LATCH2_NAND_NWE 0x0020 +#define AMS_DELTA_LATCH2_NAND_ALE 0x0040 +#define AMS_DELTA_LATCH2_NAND_CLE 0x0080 +#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 +#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 #define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 #define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 #define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 @@ -42,29 +66,9 @@ #define AMS_DELTA_GPIO_PIN_CONFIG 11 #define AMS_DELTA_GPIO_PIN_NAND_RB 12 -#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240 -#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241 -#define AMS_DELTA_GPIO_PIN_NAND_NCE 242 -#define AMS_DELTA_GPIO_PIN_NAND_NRE 243 -#define AMS_DELTA_GPIO_PIN_NAND_NWP 244 -#define AMS_DELTA_GPIO_PIN_NAND_NWE 245 -#define AMS_DELTA_GPIO_PIN_NAND_ALE 246 -#define AMS_DELTA_GPIO_PIN_NAND_CLE 247 -#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248 -#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249 -#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250 -#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251 -#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252 -#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253 - -#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN -#define AMS_DELTA_LATCH2_NGPIO 16 - #ifndef __ASSEMBLY__ -void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value); -#define ams_delta_latch2_write(mask, value) \ - ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \ - AMS_DELTA_LATCH2_NGPIO, (mask), (value)) +void ams_delta_latch1_write(u8 mask, u8 value); +void ams_delta_latch2_write(u16 mask, u16 value); #endif #endif /* CONFIG_MACH_AMS_DELTA */ diff --git a/trunk/arch/arm/plat-omap/include/plat/system.h b/trunk/arch/arm/plat-omap/include/plat/system.h new file mode 100644 index 000000000000..8e5ebd74b129 --- /dev/null +++ b/trunk/arch/arm/plat-omap/include/plat/system.h @@ -0,0 +1,15 @@ +/* + * Copied from arch/arm/mach-sa1100/include/mach/system.h + * Copyright (c) 1999 Nicolas Pitre + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +#endif diff --git a/trunk/arch/arm/plat-s3c24xx/cpu.c b/trunk/arch/arm/plat-s3c24xx/cpu.c index 32a09931350c..21f1fda8b661 100644 --- a/trunk/arch/arm/plat-s3c24xx/cpu.c +++ b/trunk/arch/arm/plat-s3c24xx/cpu.c @@ -32,7 +32,6 @@ #include #include -#include #include #include @@ -191,34 +190,8 @@ static unsigned long s3c24xx_read_idcode_v4(void) return __raw_readl(S3C2410_GSTATUS1); } -static void s3c24xx_default_idle(void) -{ - unsigned long tmp; - int i; - - /* idle the system by using the idle mode which will wait for an - * interrupt to happen before restarting the system. - */ - - /* Warning: going into idle state upsets jtag scanning */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); - - /* the samsung port seems to do a loop and then unset idle.. */ - for (i = 0; i < 50; i++) - tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ - - /* this bit is not cleared on re-start... */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); -} - void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { - arm_pm_idle = s3c24xx_default_idle; - /* initialise the io descriptors we need for initialisation */ iotable_init(mach_desc, size); iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); diff --git a/trunk/arch/arm/plat-spear/include/plat/system.h b/trunk/arch/arm/plat-spear/include/plat/system.h new file mode 100644 index 000000000000..86c6f83b44cc --- /dev/null +++ b/trunk/arch/arm/plat-spear/include/plat/system.h @@ -0,0 +1,26 @@ +/* + * arch/arm/plat-spear/include/plat/system.h + * + * SPEAr platform specific architecture functions + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_SYSTEM_H +#define __PLAT_SYSTEM_H + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +#endif /* __PLAT_SYSTEM_H */ diff --git a/trunk/drivers/amba/bus.c b/trunk/drivers/amba/bus.c index 01c2cf4efcdd..54eaf96ab217 100644 --- a/trunk/drivers/amba/bus.c +++ b/trunk/drivers/amba/bus.c @@ -497,22 +497,37 @@ static void amba_device_release(struct device *dev) } /** - * amba_device_add - add a previously allocated AMBA device structure - * @dev: AMBA device allocated by amba_device_alloc - * @parent: resource parent for this devices resources + * amba_device_register - register an AMBA device + * @dev: AMBA device to register + * @parent: parent memory resource * - * Claim the resource, and read the device cell ID if not already - * initialized. Register the AMBA device with the Linux device - * manager. + * Setup the AMBA device, reading the cell ID if present. + * Claim the resource, and register the AMBA device with + * the Linux device manager. */ -int amba_device_add(struct amba_device *dev, struct resource *parent) +int amba_device_register(struct amba_device *dev, struct resource *parent) { u32 size; void __iomem *tmp; int i, ret; - WARN_ON(dev->irq[0] == (unsigned int)-1); - WARN_ON(dev->irq[1] == (unsigned int)-1); + device_initialize(&dev->dev); + + /* + * Copy from device_add + */ + if (dev->dev.init_name) { + dev_set_name(&dev->dev, "%s", dev->dev.init_name); + dev->dev.init_name = NULL; + } + + dev->dev.release = amba_device_release; + dev->dev.bus = &amba_bustype; + dev->dev.dma_mask = &dev->dma_mask; + dev->res.name = dev_name(&dev->dev); + + if (!dev->dev.coherent_dma_mask && dev->dma_mask) + dev_warn(&dev->dev, "coherent dma mask is unset\n"); ret = request_resource(parent, &dev->res); if (ret) @@ -567,9 +582,9 @@ int amba_device_add(struct amba_device *dev, struct resource *parent) if (ret) goto err_release; - if (dev->irq[0] && dev->irq[0] != NO_IRQ) + if (dev->irq[0] != NO_IRQ) ret = device_create_file(&dev->dev, &dev_attr_irq0); - if (ret == 0 && dev->irq[1] && dev->irq[1] != NO_IRQ) + if (ret == 0 && dev->irq[1] != NO_IRQ) ret = device_create_file(&dev->dev, &dev_attr_irq1); if (ret == 0) return ret; @@ -581,74 +596,6 @@ int amba_device_add(struct amba_device *dev, struct resource *parent) err_out: return ret; } -EXPORT_SYMBOL_GPL(amba_device_add); - -static void amba_device_initialize(struct amba_device *dev, const char *name) -{ - device_initialize(&dev->dev); - if (name) - dev_set_name(&dev->dev, "%s", name); - dev->dev.release = amba_device_release; - dev->dev.bus = &amba_bustype; - dev->dev.dma_mask = &dev->dma_mask; - dev->res.name = dev_name(&dev->dev); -} - -/** - * amba_device_alloc - allocate an AMBA device - * @name: sysfs name of the AMBA device - * @base: base of AMBA device - * @size: size of AMBA device - * - * Allocate and initialize an AMBA device structure. Returns %NULL - * on failure. - */ -struct amba_device *amba_device_alloc(const char *name, resource_size_t base, - size_t size) -{ - struct amba_device *dev; - - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (dev) { - amba_device_initialize(dev, name); - dev->res.start = base; - dev->res.end = base + size - 1; - dev->res.flags = IORESOURCE_MEM; - } - - return dev; -} -EXPORT_SYMBOL_GPL(amba_device_alloc); - -/** - * amba_device_register - register an AMBA device - * @dev: AMBA device to register - * @parent: parent memory resource - * - * Setup the AMBA device, reading the cell ID if present. - * Claim the resource, and register the AMBA device with - * the Linux device manager. - */ -int amba_device_register(struct amba_device *dev, struct resource *parent) -{ - amba_device_initialize(dev, dev->dev.init_name); - dev->dev.init_name = NULL; - - if (!dev->dev.coherent_dma_mask && dev->dma_mask) - dev_warn(&dev->dev, "coherent dma mask is unset\n"); - - return amba_device_add(dev, parent); -} - -/** - * amba_device_put - put an AMBA device - * @dev: AMBA device to put - */ -void amba_device_put(struct amba_device *dev) -{ - put_device(&dev->dev); -} -EXPORT_SYMBOL_GPL(amba_device_put); /** * amba_device_unregister - unregister an AMBA device diff --git a/trunk/drivers/input/serio/ams_delta_serio.c b/trunk/drivers/input/serio/ams_delta_serio.c index 0571e2ec358b..d4d08bd9205b 100644 --- a/trunk/drivers/input/serio/ams_delta_serio.c +++ b/trunk/drivers/input/serio/ams_delta_serio.c @@ -92,7 +92,8 @@ static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id) static int ams_delta_serio_open(struct serio *serio) { /* enable keyboard */ - gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 1); + ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR, + AMD_DELTA_LATCH2_KEYBRD_PWR); return 0; } @@ -100,32 +101,9 @@ static int ams_delta_serio_open(struct serio *serio) static void ams_delta_serio_close(struct serio *serio) { /* disable keyboard */ - gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0); + ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR, 0); } -static struct gpio ams_delta_gpios[] __initconst_or_module = { - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATA, - .flags = GPIOF_DIR_IN, - .label = "serio-data", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK, - .flags = GPIOF_DIR_IN, - .label = "serio-clock", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, - .flags = GPIOF_OUT_INIT_LOW, - .label = "serio-power", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT, - .flags = GPIOF_OUT_INIT_LOW, - .label = "serio-dataout", - }, -}; - static int __init ams_delta_serio_init(void) { int err; @@ -145,12 +123,19 @@ static int __init ams_delta_serio_init(void) strlcpy(ams_delta_serio->phys, "GPIO/serio0", sizeof(ams_delta_serio->phys)); - err = gpio_request_array(ams_delta_gpios, - ARRAY_SIZE(ams_delta_gpios)); + err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_DATA, "serio-data"); if (err) { - pr_err("ams_delta_serio: Couldn't request gpio pins\n"); + pr_err("ams_delta_serio: Couldn't request gpio pin for data\n"); goto serio; } + gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_DATA); + + err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_CLK, "serio-clock"); + if (err) { + pr_err("ams_delta_serio: couldn't request gpio pin for clock\n"); + goto gpio_data; + } + gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_CLK); err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING, @@ -158,7 +143,7 @@ static int __init ams_delta_serio_init(void) if (err < 0) { pr_err("ams_delta_serio: couldn't request gpio interrupt %d\n", gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); - goto gpio; + goto gpio_clk; } /* * Since GPIO register handling for keyboard clock pin is performed @@ -172,9 +157,10 @@ static int __init ams_delta_serio_init(void) dev_info(&ams_delta_serio->dev, "%s\n", ams_delta_serio->name); return 0; -gpio: - gpio_free_array(ams_delta_gpios, - ARRAY_SIZE(ams_delta_gpios)); +gpio_clk: + gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK); +gpio_data: + gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA); serio: kfree(ams_delta_serio); return err; @@ -185,7 +171,7 @@ static void __exit ams_delta_serio_exit(void) { serio_unregister_port(ams_delta_serio); free_irq(OMAP_GPIO_IRQ(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0); - gpio_free_array(ams_delta_gpios, - ARRAY_SIZE(ams_delta_gpios)); + gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK); + gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA); } module_exit(ams_delta_serio_exit); diff --git a/trunk/drivers/leds/Kconfig b/trunk/drivers/leds/Kconfig index f5d5c03676f8..9ca28fced2b9 100644 --- a/trunk/drivers/leds/Kconfig +++ b/trunk/drivers/leds/Kconfig @@ -74,6 +74,13 @@ config LEDS_S3C24XX This option enables support for LEDs connected to GPIO lines on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440. +config LEDS_AMS_DELTA + tristate "LED Support for the Amstrad Delta (E3)" + depends on LEDS_CLASS + depends on MACH_AMS_DELTA + help + This option enables support for the LEDs on Amstrad Delta (E3). + config LEDS_NET48XX tristate "LED Support for Soekris net48xx series Error LED" depends on LEDS_CLASS diff --git a/trunk/drivers/leds/Makefile b/trunk/drivers/leds/Makefile index 8cab1bb96b5d..1fc6875a8b20 100644 --- a/trunk/drivers/leds/Makefile +++ b/trunk/drivers/leds/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o +obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o obj-$(CONFIG_LEDS_NET5501) += leds-net5501.o obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o diff --git a/trunk/drivers/leds/leds-ams-delta.c b/trunk/drivers/leds/leds-ams-delta.c new file mode 100644 index 000000000000..07428357c83f --- /dev/null +++ b/trunk/drivers/leds/leds-ams-delta.c @@ -0,0 +1,126 @@ +/* + * LEDs driver for Amstrad Delta (E3) + * + * Copyright (C) 2006 Jonathan McDowell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +/* + * Our context + */ +struct ams_delta_led { + struct led_classdev cdev; + u8 bitmask; +}; + +static void ams_delta_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct ams_delta_led *led_dev = + container_of(led_cdev, struct ams_delta_led, cdev); + + if (value) + ams_delta_latch1_write(led_dev->bitmask, led_dev->bitmask); + else + ams_delta_latch1_write(led_dev->bitmask, 0); +} + +static struct ams_delta_led ams_delta_leds[] = { + { + .cdev = { + .name = "ams-delta::camera", + .brightness_set = ams_delta_led_set, + }, + .bitmask = AMS_DELTA_LATCH1_LED_CAMERA, + }, + { + .cdev = { + .name = "ams-delta::advert", + .brightness_set = ams_delta_led_set, + }, + .bitmask = AMS_DELTA_LATCH1_LED_ADVERT, + }, + { + .cdev = { + .name = "ams-delta::email", + .brightness_set = ams_delta_led_set, + }, + .bitmask = AMS_DELTA_LATCH1_LED_EMAIL, + }, + { + .cdev = { + .name = "ams-delta::handsfree", + .brightness_set = ams_delta_led_set, + }, + .bitmask = AMS_DELTA_LATCH1_LED_HANDSFREE, + }, + { + .cdev = { + .name = "ams-delta::voicemail", + .brightness_set = ams_delta_led_set, + }, + .bitmask = AMS_DELTA_LATCH1_LED_VOICEMAIL, + }, + { + .cdev = { + .name = "ams-delta::voice", + .brightness_set = ams_delta_led_set, + }, + .bitmask = AMS_DELTA_LATCH1_LED_VOICE, + }, +}; + +static int ams_delta_led_probe(struct platform_device *pdev) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(ams_delta_leds); i++) { + ams_delta_leds[i].cdev.flags |= LED_CORE_SUSPENDRESUME; + ret = led_classdev_register(&pdev->dev, + &ams_delta_leds[i].cdev); + if (ret < 0) + goto fail; + } + + return 0; +fail: + while (--i >= 0) + led_classdev_unregister(&ams_delta_leds[i].cdev); + return ret; +} + +static int ams_delta_led_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ams_delta_leds); i++) + led_classdev_unregister(&ams_delta_leds[i].cdev); + + return 0; +} + +static struct platform_driver ams_delta_led_driver = { + .probe = ams_delta_led_probe, + .remove = ams_delta_led_remove, + .driver = { + .name = "ams-delta-led", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(ams_delta_led_driver); + +MODULE_AUTHOR("Jonathan McDowell "); +MODULE_DESCRIPTION("Amstrad Delta LED driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ams-delta-led"); diff --git a/trunk/drivers/mmc/host/mmci.c b/trunk/drivers/mmc/host/mmci.c index 304f2f98b680..0d955ffaf44e 100644 --- a/trunk/drivers/mmc/host/mmci.c +++ b/trunk/drivers/mmc/host/mmci.c @@ -1325,7 +1325,7 @@ static int __devinit mmci_probe(struct amba_device *dev, if (ret) goto unmap; - if (dev->irq[1] == NO_IRQ || !dev->irq[1]) + if (dev->irq[1] == NO_IRQ) host->singleirq = true; else { ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED, diff --git a/trunk/drivers/mtd/nand/ams-delta.c b/trunk/drivers/mtd/nand/ams-delta.c index 85934dc8546f..3197e9764fcd 100644 --- a/trunk/drivers/mtd/nand/ams-delta.c +++ b/trunk/drivers/mtd/nand/ams-delta.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include /* @@ -34,6 +34,8 @@ */ static struct mtd_info *ams_delta_mtd = NULL; +#define NAND_MASK (AMS_DELTA_LATCH2_NAND_NRE | AMS_DELTA_LATCH2_NAND_NWE | AMS_DELTA_LATCH2_NAND_CLE | AMS_DELTA_LATCH2_NAND_ALE | AMS_DELTA_LATCH2_NAND_NCE | AMS_DELTA_LATCH2_NAND_NWP) + /* * Define partitions for flash devices */ @@ -66,9 +68,10 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte) writew(0, io_base + OMAP_MPUIO_IO_CNTL); writew(byte, this->IO_ADDR_W); - gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 0); + ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, 0); ndelay(40); - gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 1); + ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, + AMS_DELTA_LATCH2_NAND_NWE); } static u_char ams_delta_read_byte(struct mtd_info *mtd) @@ -77,11 +80,12 @@ static u_char ams_delta_read_byte(struct mtd_info *mtd) struct nand_chip *this = mtd->priv; void __iomem *io_base = this->priv; - gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 0); + ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, 0); ndelay(40); writew(~0, io_base + OMAP_MPUIO_IO_CNTL); res = readw(this->IO_ADDR_R); - gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 1); + ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, + AMS_DELTA_LATCH2_NAND_NRE); return res; } @@ -128,12 +132,15 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd, { if (ctrl & NAND_CTRL_CHANGE) { - gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NCE, - (ctrl & NAND_NCE) == 0); - gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_CLE, - (ctrl & NAND_CLE) != 0); - gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_ALE, - (ctrl & NAND_ALE) != 0); + unsigned long bits; + + bits = (~ctrl & NAND_NCE) ? AMS_DELTA_LATCH2_NAND_NCE : 0; + bits |= (ctrl & NAND_CLE) ? AMS_DELTA_LATCH2_NAND_CLE : 0; + bits |= (ctrl & NAND_ALE) ? AMS_DELTA_LATCH2_NAND_ALE : 0; + + ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_CLE | + AMS_DELTA_LATCH2_NAND_ALE | + AMS_DELTA_LATCH2_NAND_NCE, bits); } if (cmd != NAND_CMD_NONE) @@ -145,39 +152,6 @@ static int ams_delta_nand_ready(struct mtd_info *mtd) return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB); } -static struct gpio _mandatory_gpio[] __initconst_or_module = { - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_NCE, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "nand_nce", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_NRE, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "nand_nre", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_NWP, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "nand_nwp", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_NWE, - .flags = GPIOF_OUT_INIT_HIGH, - .label = "nand_nwe", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_ALE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "nand_ale", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_CLE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "nand_cle", - }, -}; - /* * Main initialization routine */ @@ -249,9 +223,10 @@ static int __devinit ams_delta_init(struct platform_device *pdev) platform_set_drvdata(pdev, io_base); /* Set chip enabled, but */ - err = gpio_request_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio)); - if (err) - goto out_gpio; + ams_delta_latch2_write(NAND_MASK, AMS_DELTA_LATCH2_NAND_NRE | + AMS_DELTA_LATCH2_NAND_NWE | + AMS_DELTA_LATCH2_NAND_NCE | + AMS_DELTA_LATCH2_NAND_NWP); /* Scan to find existence of the device */ if (nand_scan(ams_delta_mtd, 1)) { @@ -266,10 +241,7 @@ static int __devinit ams_delta_init(struct platform_device *pdev) goto out; out_mtd: - gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio)); -out_gpio: platform_set_drvdata(pdev, NULL); - gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB); iounmap(io_base); out_release_io: release_mem_region(res->start, resource_size(res)); @@ -290,8 +262,6 @@ static int __devexit ams_delta_cleanup(struct platform_device *pdev) /* Release resources, unregister device */ nand_release(ams_delta_mtd); - gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio)); - gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB); iounmap(io_base); release_mem_region(res->start, resource_size(res)); diff --git a/trunk/drivers/of/platform.c b/trunk/drivers/of/platform.c index cae9477a6ed3..63b3ec48c203 100644 --- a/trunk/drivers/of/platform.c +++ b/trunk/drivers/of/platform.c @@ -253,7 +253,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node, if (!of_device_is_available(node)) return NULL; - dev = amba_device_alloc(NULL, 0, 0); + dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) return NULL; @@ -283,14 +283,14 @@ static struct amba_device *of_amba_device_create(struct device_node *node, if (ret) goto err_free; - ret = amba_device_add(dev, &iomem_resource); + ret = amba_device_register(dev, &iomem_resource); if (ret) goto err_free; return dev; err_free: - amba_device_put(dev); + kfree(dev); return NULL; } #else /* CONFIG_ARM_AMBA */ diff --git a/trunk/drivers/video/omap/lcd_ams_delta.c b/trunk/drivers/video/omap/lcd_ams_delta.c index 0e71e2898b18..0fdd6f6873bf 100644 --- a/trunk/drivers/video/omap/lcd_ams_delta.c +++ b/trunk/drivers/video/omap/lcd_ams_delta.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include @@ -99,41 +98,29 @@ static struct lcd_ops ams_delta_lcd_ops = { /* omapfb panel section */ -static struct gpio _gpios[] __initconst_or_module = { - { - .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN, - .flags = GPIOF_OUT_INIT_LOW, - .label = "lcd_vblen", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LCD_NDISP, - .flags = GPIOF_OUT_INIT_LOW, - .label = "lcd_ndisp", - }, -}; - static int ams_delta_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) { - return gpio_request_array(_gpios, ARRAY_SIZE(_gpios)); + return 0; } static void ams_delta_panel_cleanup(struct lcd_panel *panel) { - gpio_free_array(_gpios, ARRAY_SIZE(_gpios)); } static int ams_delta_panel_enable(struct lcd_panel *panel) { - gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 1); - gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 1); + ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_NDISP, + AMS_DELTA_LATCH2_LCD_NDISP); + ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_VBLEN, + AMS_DELTA_LATCH2_LCD_VBLEN); return 0; } static void ams_delta_panel_disable(struct lcd_panel *panel) { - gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 0); - gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 0); + ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_VBLEN, 0); + ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_NDISP, 0); } static unsigned long ams_delta_panel_get_caps(struct lcd_panel *panel) diff --git a/trunk/include/linux/amba/bus.h b/trunk/include/linux/amba/bus.h index a9fab831caf8..724c69c40bb8 100644 --- a/trunk/include/linux/amba/bus.h +++ b/trunk/include/linux/amba/bus.h @@ -60,9 +60,6 @@ extern struct bus_type amba_bustype; int amba_driver_register(struct amba_driver *); void amba_driver_unregister(struct amba_driver *); -struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t); -void amba_device_put(struct amba_device *); -int amba_device_add(struct amba_device *, struct resource *); int amba_device_register(struct amba_device *, struct resource *); void amba_device_unregister(struct amba_device *); struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int); @@ -92,37 +89,4 @@ void amba_release_regions(struct amba_device *); #define amba_manf(d) AMBA_MANF_BITS((d)->periphid) #define amba_part(d) AMBA_PART_BITS((d)->periphid) -#define __AMBA_DEV(busid, data, mask) \ - { \ - .coherent_dma_mask = mask, \ - .init_name = busid, \ - .platform_data = data, \ - } - -/* - * APB devices do not themselves have the ability to address memory, - * so DMA masks should be zero (much like USB peripheral devices.) - * The DMA controller DMA masks should be used instead (much like - * USB host controllers in conventional PCs.) - */ -#define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) \ -struct amba_device name##_device = { \ - .dev = __AMBA_DEV(busid, data, 0), \ - .res = DEFINE_RES_MEM(base, SZ_4K), \ - .irq = irqs, \ - .periphid = id, \ -} - -/* - * AHB devices are DMA capable, so set their DMA masks - */ -#define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data) \ -struct amba_device name##_device = { \ - .dev = __AMBA_DEV(busid, data, ~0ULL), \ - .res = DEFINE_RES_MEM(base, SZ_4K), \ - .dma_mask = ~0ULL, \ - .irq = irqs, \ - .periphid = id, \ -} - #endif diff --git a/trunk/sound/soc/omap/ams-delta.c b/trunk/sound/soc/omap/ams-delta.c index da6e005c1c41..a67f4370bc9f 100644 --- a/trunk/sound/soc/omap/ams-delta.c +++ b/trunk/sound/soc/omap/ams-delta.c @@ -635,7 +635,7 @@ static int __init ams_delta_module_init(void) platform_device_put(ams_delta_audio_platform_device); return ret; } -late_initcall(ams_delta_module_init); +module_init(ams_delta_module_init); static void __exit ams_delta_module_exit(void) {