diff --git a/[refs] b/[refs] index 8fa4c5c78c82..09131b09935b 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: 51c1abb95fe110560f6f6fd25dd9265f861c1e7a +refs/heads/master: aa7f67304d1a03180f463258aa6f15a8b434e77d diff --git a/trunk/Documentation/device-mapper/dm-raid.txt b/trunk/Documentation/device-mapper/dm-raid.txt index 56fb62b09fc5..728c38c242d6 100644 --- a/trunk/Documentation/device-mapper/dm-raid.txt +++ b/trunk/Documentation/device-mapper/dm-raid.txt @@ -141,4 +141,3 @@ Version History 1.2.0 Handle creation of arrays that contain failed devices. 1.3.0 Added support for RAID 10 1.3.1 Allow device replacement/rebuild for RAID 10 -1.3.2 Fix/improve redundancy checking for RAID10 diff --git a/trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index bc50899e0c81..3a268127b054 100644 --- a/trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -81,8 +81,7 @@ PA31 TXD4 Required properties for pin configuration node: - atmel,pins: 4 integers array, represents a group of pins mux and config setting. The format is atmel,pins = . - The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B... - PIN_BANK 0 is pioA, PIN_BANK 1 is pioB... + The PERIPH 0 means gpio. Bits used for CONFIG: PULL_UP (1 << 0): indicate this pin need a pull up. @@ -127,7 +126,7 @@ pinctrl@fffff400 { pinctrl_dbgu: dbgu-0 { atmel,pins = <1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x1>; /* PB15 periph A with pullup */ + 1 15 0x1 0x1>; /* PB15 periph with pullup */ }; }; }; diff --git a/trunk/Documentation/hid/hid-sensor.txt b/trunk/Documentation/hid/hid-sensor.txt old mode 100644 new mode 100755 diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt index 6c723811c0a0..363e348bff9b 100644 --- a/trunk/Documentation/kernel-parameters.txt +++ b/trunk/Documentation/kernel-parameters.txt @@ -2438,7 +2438,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. real-time workloads. It can also improve energy efficiency for asymmetric multiprocessors. - rcu_nocb_poll [KNL,BOOT] + rcu_nocbs_poll [KNL,BOOT] Rather than requiring that offloaded CPUs (specified by rcu_nocbs= above) explicitly awaken the corresponding "rcuoN" kthreads, diff --git a/trunk/Documentation/x86/boot.txt b/trunk/Documentation/x86/boot.txt index 3edb4c2887a1..406d82d5d2bb 100644 --- a/trunk/Documentation/x86/boot.txt +++ b/trunk/Documentation/x86/boot.txt @@ -57,10 +57,6 @@ Protocol 2.10: (Kernel 2.6.31) Added a protocol for relaxed alignment Protocol 2.11: (Kernel 3.6) Added a field for offset of EFI handover protocol entry point. -Protocol 2.12: (Kernel 3.9) Added the xloadflags field and extension fields - to struct boot_params for for loading bzImage and ramdisk - above 4G in 64bit. - **** MEMORY LAYOUT The traditional memory map for the kernel loader, used for Image or @@ -186,7 +182,7 @@ Offset Proto Name Meaning 0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel 0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not 0235/1 2.10+ min_alignment Minimum alignment, as a power of two -0236/2 2.12+ xloadflags Boot protocol option flags +0236/2 N/A pad3 Unused 0238/4 2.06+ cmdline_size Maximum size of the kernel command line 023C/4 2.07+ hardware_subarch Hardware subarchitecture 0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data @@ -586,27 +582,6 @@ Protocol: 2.10+ misaligned kernel. Therefore, a loader should typically try each power-of-two alignment from kernel_alignment down to this alignment. -Field name: xloadflags -Type: read -Offset/size: 0x236/2 -Protocol: 2.12+ - - This field is a bitmask. - - Bit 0 (read): XLF_KERNEL_64 - - If 1, this kernel has the legacy 64-bit entry point at 0x200. - - Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G - - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G. - - Bit 2 (read): XLF_EFI_HANDOVER_32 - - If 1, the kernel supports the 32-bit EFI handoff entry point - given at handover_offset. - - Bit 3 (read): XLF_EFI_HANDOVER_64 - - If 1, the kernel supports the 64-bit EFI handoff entry point - given at handover_offset + 0x200. - Field name: cmdline_size Type: read Offset/size: 0x238/4 diff --git a/trunk/Documentation/x86/zero-page.txt b/trunk/Documentation/x86/zero-page.txt index 199f453cb4de..cf5437deda81 100644 --- a/trunk/Documentation/x86/zero-page.txt +++ b/trunk/Documentation/x86/zero-page.txt @@ -19,9 +19,6 @@ Offset Proto Name Meaning 090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!! 0A0/010 ALL sys_desc_table System description table (struct sys_desc_table) 0B0/010 ALL olpc_ofw_header OLPC's OpenFirmware CIF and friends -0C0/004 ALL ext_ramdisk_image ramdisk_image high 32bits -0C4/004 ALL ext_ramdisk_size ramdisk_size high 32bits -0C8/004 ALL ext_cmd_line_ptr cmd_line_ptr high 32bits 140/080 ALL edid_info Video mode setup (struct edid_info) 1C0/020 ALL efi_info EFI 32 information (struct efi_info) 1E0/004 ALL alk_mem_k Alternative mem check, in KB @@ -30,7 +27,6 @@ Offset Proto Name Meaning 1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below) 1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer (below) -1EF/001 ALL sentinel Used to detect broken bootloaders 290/040 ALL edd_mbr_sig_buffer EDD MBR signatures 2D0/A00 ALL e820_map E820 memory map table (array of struct e820entry) diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index 212c255b9347..8ae709e34523 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -2966,7 +2966,7 @@ S: Maintained F: drivers/net/ethernet/i825xx/eexpress.* ETHERNET BRIDGE -M: Stephen Hemminger +M: Stephen Hemminger L: bridge@lists.linux-foundation.org L: netdev@vger.kernel.org W: http://www.linuxfoundation.org/en/Net:Bridge @@ -4905,7 +4905,7 @@ S: Maintained MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2) M: Mirko Lindner -M: Stephen Hemminger +M: Stephen Hemminger L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/marvell/sk* @@ -5180,7 +5180,7 @@ S: Supported F: drivers/infiniband/hw/nes/ NETEM NETWORK EMULATOR -M: Stephen Hemminger +M: Stephen Hemminger L: netem@lists.linux-foundation.org S: Maintained F: net/sched/sch_netem.c @@ -7088,7 +7088,7 @@ F: include/uapi/sound/ F: sound/ SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC) -M: Liam Girdwood +M: Liam Girdwood M: Mark Brown T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git L: alsa-devel@alsa-project.org (moderated for non-subscribers) diff --git a/trunk/Makefile b/trunk/Makefile index 54dfde5e9f9e..2cd4c6be44f2 100644 --- a/trunk/Makefile +++ b/trunk/Makefile @@ -1,8 +1,8 @@ VERSION = 3 PATCHLEVEL = 8 SUBLEVEL = 0 -EXTRAVERSION = -rc6 -NAME = Unicycling Gorilla +EXTRAVERSION = -rc4 +NAME = Terrified Chipmunk # *DOCUMENTATION* # To see a list of typical targets execute "make help" diff --git a/trunk/arch/arm/boot/dts/armada-370-db.dts b/trunk/arch/arm/boot/dts/armada-370-db.dts index 9b82facb2561..00044026ef1f 100644 --- a/trunk/arch/arm/boot/dts/armada-370-db.dts +++ b/trunk/arch/arm/boot/dts/armada-370-db.dts @@ -26,7 +26,7 @@ memory { device_type = "memory"; - reg = <0x00000000 0x40000000>; /* 1 GB */ + reg = <0x00000000 0x20000000>; /* 512 MB */ }; soc { diff --git a/trunk/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/trunk/arch/arm/boot/dts/armada-xp-mv78230.dtsi index e041f42ed711..271855a6e224 100644 --- a/trunk/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/trunk/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -50,25 +50,27 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018100 0x40>; + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; + interrupts = <16>, <17>, <18>, <19>; }; gpio1: gpio@d0018140 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018140 0x40>; + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; ngpios = <17>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>; + interrupts = <20>, <21>, <22>; }; }; }; diff --git a/trunk/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/trunk/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 9e23bd8c9536..1c1937dbce73 100644 --- a/trunk/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/trunk/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -51,36 +51,39 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018100 0x40>; + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; + interrupts = <16>, <17>, <18>, <19>; }; gpio1: gpio@d0018140 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018140 0x40>; + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; + interrupts = <20>, <21>, <22>, <23>; }; gpio2: gpio@d0018180 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018180 0x40>; + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018180 0x40>, + <0xd0018870 0x30>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <91>; + interrupts = <24>; }; ethernet@d0034000 { diff --git a/trunk/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/trunk/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 965966110e38..4905cf3a5ef8 100644 --- a/trunk/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/trunk/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -66,36 +66,39 @@ }; gpio0: gpio@d0018100 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018100 0x40>; + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; + interrupts = <16>, <17>, <18>, <19>; }; gpio1: gpio@d0018140 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018140 0x40>; + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; + interrupts = <20>, <21>, <22>, <23>; }; gpio2: gpio@d0018180 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018180 0x40>; + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018180 0x40>, + <0xd0018870 0x30>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupts-cells = <2>; - interrupts = <91>; + interrupts = <24>; }; ethernet@d0034000 { diff --git a/trunk/arch/arm/boot/dts/at91rm9200.dtsi b/trunk/arch/arm/boot/dts/at91rm9200.dtsi index 222047f1ece9..e154f242c680 100644 --- a/trunk/arch/arm/boot/dts/at91rm9200.dtsi +++ b/trunk/arch/arm/boot/dts/at91rm9200.dtsi @@ -336,8 +336,8 @@ i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 25 0 /* sda */ - &pioA 26 0 /* scl */ + gpios = <&pioA 23 0 /* sda */ + &pioA 24 0 /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/trunk/arch/arm/boot/dts/at91sam9x5.dtsi b/trunk/arch/arm/boot/dts/at91sam9x5.dtsi index 8ecca6948d81..3a47cf952146 100644 --- a/trunk/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/trunk/arch/arm/boot/dts/at91sam9x5.dtsi @@ -143,11 +143,6 @@ atmel,pins = <0 3 0x1 0x0>; /* PA3 periph A */ }; - - pinctrl_usart0_sck: usart0_sck-0 { - atmel,pins = - <0 4 0x1 0x0>; /* PA4 periph A */ - }; }; usart1 { @@ -159,17 +154,12 @@ pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <2 27 0x3 0x0>; /* PC27 periph C */ + <3 27 0x3 0x0>; /* PC27 periph C */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <2 28 0x3 0x0>; /* PC28 periph C */ - }; - - pinctrl_usart1_sck: usart1_sck-0 { - atmel,pins = - <2 28 0x3 0x0>; /* PC29 periph C */ + <3 28 0x3 0x0>; /* PC28 periph C */ }; }; @@ -182,56 +172,46 @@ pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <0 0 0x2 0x0>; /* PB0 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ - }; - - pinctrl_usart2_sck: usart2_sck-0 { - atmel,pins = - <1 2 0x2 0x0>; /* PB2 periph B */ + <0 1 0x2 0x0>; /* PB1 periph B */ }; }; usart3 { pinctrl_uart3: usart3-0 { atmel,pins = - <2 23 0x2 0x1 /* PC22 periph B with pullup */ - 2 23 0x2 0x0>; /* PC23 periph B */ + <3 23 0x2 0x1 /* PC22 periph B with pullup */ + 3 23 0x2 0x0>; /* PC23 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 24 0x2 0x0>; /* PC24 periph B */ + <3 24 0x2 0x0>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 25 0x2 0x0>; /* PC25 periph B */ - }; - - pinctrl_usart3_sck: usart3_sck-0 { - atmel,pins = - <2 26 0x2 0x0>; /* PC26 periph B */ + <3 25 0x2 0x0>; /* PC25 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 8 0x3 0x0 /* PC8 periph C */ - 2 9 0x3 0x1>; /* PC9 periph C with pullup */ + <3 8 0x3 0x0 /* PC8 periph C */ + 3 9 0x3 0x1>; /* PC9 periph C with pullup */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <2 16 0x3 0x0 /* PC16 periph C */ - 2 17 0x3 0x1>; /* PC17 periph C with pullup */ + <3 16 0x3 0x0 /* PC16 periph C */ + 3 17 0x3 0x1>; /* PC17 periph C with pullup */ }; }; @@ -260,14 +240,14 @@ pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { atmel,pins = - <1 8 0x1 0x0 /* PB8 periph A */ - 1 11 0x1 0x0 /* PB11 periph A */ - 1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0 /* PB13 periph A */ - 1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x0 /* PB15 periph A */ - 1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0>; /* PB17 periph A */ + <1 8 0x1 0x0 /* PA8 periph A */ + 1 11 0x1 0x0 /* PA11 periph A */ + 1 12 0x1 0x0 /* PA12 periph A */ + 1 13 0x1 0x0 /* PA13 periph A */ + 1 14 0x1 0x0 /* PA14 periph A */ + 1 15 0x1 0x0 /* PA15 periph A */ + 1 16 0x1 0x0 /* PA16 periph A */ + 1 17 0x1 0x0>; /* PA17 periph A */ }; }; diff --git a/trunk/arch/arm/boot/dts/cros5250-common.dtsi b/trunk/arch/arm/boot/dts/cros5250-common.dtsi index 46c098017036..fddd17417433 100644 --- a/trunk/arch/arm/boot/dts/cros5250-common.dtsi +++ b/trunk/arch/arm/boot/dts/cros5250-common.dtsi @@ -96,8 +96,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; slot@0 { reg = <0>; @@ -120,8 +120,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; slot@0 { reg = <0>; @@ -141,8 +141,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; slot@0 { reg = <0>; diff --git a/trunk/arch/arm/boot/dts/dove-cubox.dts b/trunk/arch/arm/boot/dts/dove-cubox.dts index cdee96fca6e2..fed7d3f9f431 100644 --- a/trunk/arch/arm/boot/dts/dove-cubox.dts +++ b/trunk/arch/arm/boot/dts/dove-cubox.dts @@ -26,15 +26,10 @@ }; &uart0 { status = "okay"; }; +&sdio0 { status = "okay"; }; &sata0 { status = "okay"; }; &i2c0 { status = "okay"; }; -&sdio0 { - status = "okay"; - /* sdio0 card detect is connected to wrong pin on CuBox */ - cd-gpios = <&gpio0 12 1>; -}; - &spi0 { status = "okay"; @@ -47,14 +42,9 @@ }; &pinctrl { - pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>; + pinctrl-0 = <&pmx_gpio_18>; pinctrl-names = "default"; - pmx_gpio_12: pmx-gpio-12 { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - pmx_gpio_18: pmx-gpio-18 { marvell,pins = "mpp18"; marvell,function = "gpio"; diff --git a/trunk/arch/arm/boot/dts/exynos5250-smdk5250.dts b/trunk/arch/arm/boot/dts/exynos5250-smdk5250.dts index e05b18f3c33d..942d5761ca97 100644 --- a/trunk/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/trunk/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -115,8 +115,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; slot@0 { reg = <0>; @@ -139,8 +139,8 @@ fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; slot@0 { reg = <0>; diff --git a/trunk/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/trunk/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 77d21abfcdf7..9bc6785ad228 100644 --- a/trunk/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/trunk/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -1,5 +1,4 @@ /include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" / { chosen { @@ -7,21 +6,6 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0 - &pmx_ns2_sata0 &pmx_ns2_sata1>; - pinctrl-names = "default"; - - pmx_ns2_sata0: pmx-ns2-sata0 { - marvell,pins = "mpp21"; - marvell,function = "sata0"; - }; - pmx_ns2_sata1: pmx-ns2-sata1 { - marvell,pins = "mpp20"; - marvell,function = "sata1"; - }; - }; - serial@12000 { clock-frequency = <166666667>; status = "okay"; diff --git a/trunk/arch/arm/boot/dts/kirkwood.dtsi b/trunk/arch/arm/boot/dts/kirkwood.dtsi index d6ab442b7011..110d6cbb795b 100644 --- a/trunk/arch/arm/boot/dts/kirkwood.dtsi +++ b/trunk/arch/arm/boot/dts/kirkwood.dtsi @@ -36,7 +36,6 @@ reg = <0x10100 0x40>; ngpios = <32>; interrupt-controller; - #interrupt-cells = <2>; interrupts = <35>, <36>, <37>, <38>; }; @@ -47,7 +46,6 @@ reg = <0x10140 0x40>; ngpios = <18>; interrupt-controller; - #interrupt-cells = <2>; interrupts = <39>, <40>, <41>; }; diff --git a/trunk/arch/arm/boot/dts/kizbox.dts b/trunk/arch/arm/boot/dts/kizbox.dts index b4dc3ed9a3ec..e8814fe0e277 100644 --- a/trunk/arch/arm/boot/dts/kizbox.dts +++ b/trunk/arch/arm/boot/dts/kizbox.dts @@ -48,8 +48,6 @@ macb0: ethernet@fffc4000 { phy-mode = "mii"; - pinctrl-0 = <&pinctrl_macb_rmii - &pinctrl_macb_rmii_mii_alt>; status = "okay"; }; diff --git a/trunk/arch/arm/boot/dts/sunxi.dtsi b/trunk/arch/arm/boot/dts/sunxi.dtsi index 8b36abea9f2e..8bbc2bfef221 100644 --- a/trunk/arch/arm/boot/dts/sunxi.dtsi +++ b/trunk/arch/arm/boot/dts/sunxi.dtsi @@ -60,21 +60,19 @@ }; uart0: uart@01c28000 { - compatible = "snps,dw-apb-uart"; + compatible = "ns8250"; reg = <0x01c28000 0x400>; interrupts = <1>; reg-shift = <2>; - reg-io-width = <4>; clock-frequency = <24000000>; status = "disabled"; }; uart1: uart@01c28400 { - compatible = "snps,dw-apb-uart"; + compatible = "ns8250"; reg = <0x01c28400 0x400>; interrupts = <2>; reg-shift = <2>; - reg-io-width = <4>; clock-frequency = <24000000>; status = "disabled"; }; diff --git a/trunk/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/trunk/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index cf8071ad22d5..1fc405a9ecfb 100644 --- a/trunk/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/trunk/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -45,6 +45,7 @@ reg = <1>; }; +/* A7s disabled till big.LITTLE patches are available... cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -62,6 +63,7 @@ compatible = "arm,cortex-a7"; reg = <0x102>; }; +*/ }; memory@80000000 { diff --git a/trunk/arch/arm/configs/at91_dt_defconfig b/trunk/arch/arm/configs/at91_dt_defconfig index 1ea959019fcd..b175577d7abb 100644 --- a/trunk/arch/arm/configs/at91_dt_defconfig +++ b/trunk/arch/arm/configs/at91_dt_defconfig @@ -19,7 +19,6 @@ CONFIG_SOC_AT91SAM9260=y CONFIG_SOC_AT91SAM9263=y CONFIG_SOC_AT91SAM9G45=y CONFIG_SOC_AT91SAM9X5=y -CONFIG_SOC_AT91SAM9N12=y CONFIG_MACH_AT91SAM_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_TIMER_HZ=128 @@ -32,7 +31,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" +CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" CONFIG_KEXEC=y CONFIG_AUTO_ZRELADDR=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set diff --git a/trunk/arch/arm/kernel/debug.S b/trunk/arch/arm/kernel/debug.S index 14f7c3b14632..6809200c31fb 100644 --- a/trunk/arch/arm/kernel/debug.S +++ b/trunk/arch/arm/kernel/debug.S @@ -100,14 +100,12 @@ ENTRY(printch) b 1b ENDPROC(printch) -#ifdef CONFIG_MMU ENTRY(debug_ll_addr) addruart r2, r3, ip str r2, [r0] str r3, [r1] mov pc, lr ENDPROC(debug_ll_addr) -#endif #else diff --git a/trunk/arch/arm/kernel/head.S b/trunk/arch/arm/kernel/head.S index 486a15ae9011..4eee351f4668 100644 --- a/trunk/arch/arm/kernel/head.S +++ b/trunk/arch/arm/kernel/head.S @@ -246,7 +246,6 @@ __create_page_tables: /* * Then map boot params address in r2 if specified. - * We map 2 sections in case the ATAGs/DTB crosses a section boundary. */ mov r0, r2, lsr #SECTION_SHIFT movs r0, r0, lsl #SECTION_SHIFT @@ -254,8 +253,6 @@ __create_page_tables: addne r3, r3, #PAGE_OFFSET addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) orrne r6, r7, r0 - strne r6, [r3], #1 << PMD_ORDER - addne r6, r6, #1 << SECTION_SHIFT strne r6, [r3] #ifdef CONFIG_DEBUG_LL @@ -334,7 +331,7 @@ ENTRY(secondary_startup) * as it has already been validated by the primary processor. */ #ifdef CONFIG_ARM_VIRT_EXT - bl __hyp_stub_install_secondary + bl __hyp_stub_install #endif safe_svcmode_maskall r9 diff --git a/trunk/arch/arm/kernel/hyp-stub.S b/trunk/arch/arm/kernel/hyp-stub.S index 1315c4ccfa56..65b2417aebce 100644 --- a/trunk/arch/arm/kernel/hyp-stub.S +++ b/trunk/arch/arm/kernel/hyp-stub.S @@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary) * immediately. */ compare_cpu_mode_with_primary r4, r5, r6, r7 - movne pc, lr + bxne lr /* * Once we have given up on one CPU, we do not try to install the @@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary) */ cmp r4, #HYP_MODE - movne pc, lr @ give up if the CPU is not in HYP mode + bxne lr @ give up if the CPU is not in HYP mode /* * Configure HSCTLR to set correct exception endianness/instruction set @@ -120,8 +120,7 @@ ENTRY(__hyp_stub_install_secondary) * Eventually, CPU-specific code might be needed -- assume not for now * * This code relies on the "eret" instruction to synchronize the - * various coprocessor accesses. This is done when we switch to SVC - * (see safe_svcmode_maskall). + * various coprocessor accesses. */ @ Now install the hypervisor stub: adr r7, __hyp_stub_vectors @@ -156,7 +155,14 @@ THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE 1: #endif - bx lr @ The boot CPU mode is left in r4. + bic r7, r4, #MODE_MASK + orr r7, r7, #SVC_MODE +THUMB( orr r7, r7, #PSR_T_BIT ) + msr spsr_cxsf, r7 @ This is SPSR_hyp. + + __MSR_ELR_HYP(14) @ msr elr_hyp, lr + __ERET @ return, switching to SVC mode + @ The boot CPU mode is left in r4. ENDPROC(__hyp_stub_install_secondary) __hyp_stub_do_trap: @@ -194,7 +200,7 @@ ENDPROC(__hyp_get_vectors) @ fall through ENTRY(__hyp_set_vectors) __HVC(0) - mov pc, lr + bx lr ENDPROC(__hyp_set_vectors) #ifndef ZIMAGE diff --git a/trunk/arch/arm/mach-at91/setup.c b/trunk/arch/arm/mach-at91/setup.c index 4b678478cf95..9ee866ce0478 100644 --- a/trunk/arch/arm/mach-at91/setup.c +++ b/trunk/arch/arm/mach-at91/setup.c @@ -105,8 +105,6 @@ static void __init soc_detect(u32 dbgu_base) switch (socid) { case ARCH_ID_AT91RM9200: at91_soc_initdata.type = AT91_SOC_RM9200; - if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE) - at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; at91_boot_soc = at91rm9200_soc; break; diff --git a/trunk/arch/arm/mach-imx/Kconfig b/trunk/arch/arm/mach-imx/Kconfig index 0a2349dc7018..3e628fd7a674 100644 --- a/trunk/arch/arm/mach-imx/Kconfig +++ b/trunk/arch/arm/mach-imx/Kconfig @@ -851,7 +851,6 @@ config SOC_IMX6Q select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC - select HAVE_IMX_SRC select HAVE_SMP select MFD_SYSCON select PINCTRL diff --git a/trunk/arch/arm/mach-imx/clk-imx6q.c b/trunk/arch/arm/mach-imx/clk-imx6q.c index c0c4e723b7f5..7f2c10c7413a 100644 --- a/trunk/arch/arm/mach-imx/clk-imx6q.c +++ b/trunk/arch/arm/mach-imx/clk-imx6q.c @@ -436,9 +436,6 @@ int __init mx6q_clocks_init(void) for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clk[clks_init_on[i]]); - /* Set initial power mode */ - imx6q_set_lpm(WAIT_CLOCKED); - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/trunk/arch/arm/mach-imx/common.h b/trunk/arch/arm/mach-imx/common.h index fa36fb84ab19..7191ab4434e5 100644 --- a/trunk/arch/arm/mach-imx/common.h +++ b/trunk/arch/arm/mach-imx/common.h @@ -142,7 +142,6 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_clock_map_io(void); extern void imx_cpu_die(unsigned int cpu); -extern int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_PM extern void imx6q_pm_init(void); diff --git a/trunk/arch/arm/mach-imx/devices/platform-imx-fb.c b/trunk/arch/arm/mach-imx/devices/platform-imx-fb.c index 25a47c616b2d..10b0ed39f07f 100644 --- a/trunk/arch/arm/mach-imx/devices/platform-imx-fb.c +++ b/trunk/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb( .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device_dmamask(data->devid, 0, + return imx_add_platform_device_dmamask("imx-fb", 0, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/trunk/arch/arm/mach-imx/hotplug.c b/trunk/arch/arm/mach-imx/hotplug.c index 7bc5fe15dda2..3dec962b0770 100644 --- a/trunk/arch/arm/mach-imx/hotplug.c +++ b/trunk/arch/arm/mach-imx/hotplug.c @@ -46,11 +46,9 @@ static inline void cpu_enter_lowpower(void) void imx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); - cpu_do_idle(); -} - -int imx_cpu_kill(unsigned int cpu) -{ imx_enable_cpu(cpu, false); - return 1; + + /* spin here until hardware takes it down */ + while (1) + ; } diff --git a/trunk/include/linux/platform_data/imx-iram.h b/trunk/arch/arm/mach-imx/iram.h similarity index 100% rename from trunk/include/linux/platform_data/imx-iram.h rename to trunk/arch/arm/mach-imx/iram.h diff --git a/trunk/arch/arm/mach-imx/iram_alloc.c b/trunk/arch/arm/mach-imx/iram_alloc.c index e05cf407db65..6c80424f678e 100644 --- a/trunk/arch/arm/mach-imx/iram_alloc.c +++ b/trunk/arch/arm/mach-imx/iram_alloc.c @@ -22,7 +22,8 @@ #include #include #include -#include "linux/platform_data/imx-iram.h" + +#include "iram.h" static unsigned long iram_phys_base; static void __iomem *iram_virt_base; diff --git a/trunk/arch/arm/mach-imx/platsmp.c b/trunk/arch/arm/mach-imx/platsmp.c index 66fae885c842..3777b805b76b 100644 --- a/trunk/arch/arm/mach-imx/platsmp.c +++ b/trunk/arch/arm/mach-imx/platsmp.c @@ -92,6 +92,5 @@ struct smp_operations imx_smp_ops __initdata = { .smp_boot_secondary = imx_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = imx_cpu_die, - .cpu_kill = imx_cpu_kill, #endif }; diff --git a/trunk/arch/arm/mach-imx/pm-imx6q.c b/trunk/arch/arm/mach-imx/pm-imx6q.c index ee42d20cba19..a17543da602d 100644 --- a/trunk/arch/arm/mach-imx/pm-imx6q.c +++ b/trunk/arch/arm/mach-imx/pm-imx6q.c @@ -41,7 +41,6 @@ static int imx6q_pm_enter(suspend_state_t state) cpu_suspend(0, imx6q_suspend_finish); imx_smp_prepare(); imx_gpc_post_resume(); - imx6q_set_lpm(WAIT_CLOCKED); break; default: return -EINVAL; diff --git a/trunk/arch/arm/mach-integrator/pci_v3.c b/trunk/arch/arm/mach-integrator/pci_v3.c index e7fcea7f3300..be50e795536d 100644 --- a/trunk/arch/arm/mach-integrator/pci_v3.c +++ b/trunk/arch/arm/mach-integrator/pci_v3.c @@ -475,12 +475,13 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) { int ret = 0; - if (!ap_syscon_base) - return -EINVAL; - if (nr == 0) { sys->mem_offset = PHYS_PCI_MEM_BASE; ret = pci_v3_setup_resources(sys); + /* Remap the Integrator system controller */ + ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) + return -EINVAL; } return ret; @@ -496,13 +497,6 @@ void __init pci_v3_preinit(void) unsigned int temp; int ret; - /* Remap the Integrator system controller */ - ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); - if (!ap_syscon_base) { - pr_err("unable to remap the AP syscon for PCIv3\n"); - return; - } - pcibios_min_mem = 0x00100000; /* diff --git a/trunk/arch/arm/mach-kirkwood/board-ns2.c b/trunk/arch/arm/mach-kirkwood/board-ns2.c index f4632a809f68..8821720ab5a4 100644 --- a/trunk/arch/arm/mach-kirkwood/board-ns2.c +++ b/trunk/arch/arm/mach-kirkwood/board-ns2.c @@ -18,11 +18,47 @@ #include #include #include "common.h" +#include "mpp.h" static struct mv643xx_eth_platform_data ns2_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; +static unsigned int ns2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Fan speed (bit 1) */ + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP16_GPIO, /* SATA 0 power */ + MPP17_GPIO, /* SATA 1 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP22_GPIO, /* Fan speed (bit 0) */ + MPP23_GPIO, /* Fan power */ + MPP24_GPIO, /* USB mode select */ + MPP25_GPIO, /* Fan rotation fail */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* Blue led (slow register) */ + MPP30_GPIO, /* Blue led (command register) */ + MPP31_GPIO, /* Board power off */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + MPP33_GPO, /* Fan speed (bit 2) */ + 0 +}; + #define NS2_GPIO_POWER_OFF 31 static void ns2_power_off(void) @@ -35,6 +71,8 @@ void __init ns2_init(void) /* * Basic setup. Needs to be called early. */ + kirkwood_mpp_conf(ns2_mpp_config); + if (of_machine_is_compatible("lacie,netspace_lite_v2") || of_machine_is_compatible("lacie,netspace_mini_v2")) ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); diff --git a/trunk/arch/arm/mach-mvebu/Makefile b/trunk/arch/arm/mach-mvebu/Makefile index 99df4df680fd..5dcb369b58aa 100644 --- a/trunk/arch/arm/mach-mvebu/Makefile +++ b/trunk/arch/arm/mach-mvebu/Makefile @@ -1,8 +1,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-orion/include -AFLAGS_coherency_ll.o := -Wa,-march=armv7-a - obj-y += system-controller.o obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/trunk/arch/arm/mach-omap2/board-omap4panda.c b/trunk/arch/arm/mach-omap2/board-omap4panda.c index 769c1feee1c4..5c8e9cee2c2e 100644 --- a/trunk/arch/arm/mach-omap2/board-omap4panda.c +++ b/trunk/arch/arm/mach-omap2/board-omap4panda.c @@ -397,12 +397,6 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP_PULL_ENA), OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - /* UART2 - BT/FM/GPS shared transport */ - OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0), - OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), - OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0), - OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), - { .reg_offset = OMAP_MUX_TERMINATOR }, }; diff --git a/trunk/arch/arm/mach-omap2/cclock2420_data.c b/trunk/arch/arm/mach-omap2/cclock2420_data.c index ab7e952d2070..7e5febe456d9 100644 --- a/trunk/arch/arm/mach-omap2/cclock2420_data.c +++ b/trunk/arch/arm/mach-omap2/cclock2420_data.c @@ -1935,8 +1935,6 @@ int __init omap2420_clk_init(void) omap2_init_clk_hw_omap_clocks(c->lk.clk); } - omap2xxx_clkt_vps_late_init(); - omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, diff --git a/trunk/arch/arm/mach-omap2/cclock2430_data.c b/trunk/arch/arm/mach-omap2/cclock2430_data.c index eb3dab68d536..eda079b96c6a 100644 --- a/trunk/arch/arm/mach-omap2/cclock2430_data.c +++ b/trunk/arch/arm/mach-omap2/cclock2430_data.c @@ -2050,8 +2050,6 @@ int __init omap2430_clk_init(void) omap2_init_clk_hw_omap_clocks(c->lk.clk); } - omap2xxx_clkt_vps_late_init(); - omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, diff --git a/trunk/arch/arm/mach-omap2/cclock44xx_data.c b/trunk/arch/arm/mach-omap2/cclock44xx_data.c index a2cc046b47f4..5789a5e25563 100644 --- a/trunk/arch/arm/mach-omap2/cclock44xx_data.c +++ b/trunk/arch/arm/mach-omap2/cclock44xx_data.c @@ -2026,13 +2026,14 @@ int __init omap4xxx_clk_init(void) * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power * state when turning the ABE clock domain. Workaround this by * locking the ABE DPLL on boot. - * Lock the ABE DPLL in any case to avoid issues with audio. */ - rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck); - if (!rc) - rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ); - if (rc) - pr_err("%s: failed to configure ABE DPLL!\n", __func__); + if (cpu_is_omap446x()) { + rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck); + if (!rc) + rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ); + if (rc) + pr_err("%s: failed to configure ABE DPLL!\n", __func__); + } return 0; } diff --git a/trunk/arch/arm/mach-omap2/devices.c b/trunk/arch/arm/mach-omap2/devices.c index 626f3ea3142f..5e304d0719a2 100644 --- a/trunk/arch/arm/mach-omap2/devices.c +++ b/trunk/arch/arm/mach-omap2/devices.c @@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev) return cnt; } -static void __init omap_init_ocp2scp(void) +static void omap_init_ocp2scp(void) { struct omap_hwmod *oh; struct platform_device *pdev; diff --git a/trunk/arch/arm/mach-omap2/drm.c b/trunk/arch/arm/mach-omap2/drm.c index 2a2cfa88ddbf..4c7566c7e24a 100644 --- a/trunk/arch/arm/mach-omap2/drm.c +++ b/trunk/arch/arm/mach-omap2/drm.c @@ -25,7 +25,6 @@ #include #include -#include "soc.h" #include "omap_device.h" #include "omap_hwmod.h" @@ -57,7 +56,7 @@ static int __init omap_init_drm(void) oh->name); } - platform_data.omaprev = GET_OMAP_TYPE; + platform_data.omaprev = GET_OMAP_REVISION(); return platform_device_register(&omap_drm_device); diff --git a/trunk/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/trunk/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 793f54ac7d14..129d5081ed15 100644 --- a/trunk/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/trunk/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2132,12 +2132,8 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { * currently reset very early during boot, before I2C is * available, so it doesn't seem that we have any choice in * the kernel other than to avoid resetting it. - * - * Also, McPDM needs to be configured to NO_IDLE mode when it - * is in used otherwise vital clocks will be gated which - * results 'slow motion' audio playback. */ - .flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE, + .flags = HWMOD_EXT_OPT_MAIN_CLK, .mpu_irqs = omap44xx_mcpdm_irqs, .sdma_reqs = omap44xx_mcpdm_sdma_reqs, .main_clk = "mcpdm_fck", diff --git a/trunk/arch/arm/mach-omap2/timer.c b/trunk/arch/arm/mach-omap2/timer.c index b8ad6e632bb8..691aa674665a 100644 --- a/trunk/arch/arm/mach-omap2/timer.c +++ b/trunk/arch/arm/mach-omap2/timer.c @@ -165,11 +165,15 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, struct device_node *np; for_each_matching_node(np, match) { - if (!of_device_is_available(np)) + if (!of_device_is_available(np)) { + of_node_put(np); continue; + } - if (property && !of_get_property(np, property, NULL)) + if (property && !of_get_property(np, property, NULL)) { + of_node_put(np); continue; + } of_add_property(np, &device_disabled); return np; diff --git a/trunk/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/trunk/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 755c0bb119f4..553059f51841 100644 --- a/trunk/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/trunk/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -47,7 +47,7 @@ static struct spi_board_info wm1253_devs[] = { .bus_num = 0, .chip_select = 0, .mode = SPI_MODE_0, - .irq = S3C_EINT(4), + .irq = S3C_EINT(5), .controller_data = &wm0010_spi_csinfo, .platform_data = &wm0010_pdata, }, diff --git a/trunk/arch/arm/mach-s3c64xx/pm.c b/trunk/arch/arm/mach-s3c64xx/pm.c index d2e1a16690bd..7feb426fc202 100644 --- a/trunk/arch/arm/mach-s3c64xx/pm.c +++ b/trunk/arch/arm/mach-s3c64xx/pm.c @@ -338,10 +338,8 @@ int __init s3c64xx_pm_init(void) for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++) pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false); -#ifdef CONFIG_S3C_DEV_FB if (dev_get_platdata(&s3c_device_fb.dev)) pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev); -#endif return 0; } diff --git a/trunk/arch/arm/mm/dma-mapping.c b/trunk/arch/arm/mm/dma-mapping.c index 076c26d43864..6b2fb87c8698 100644 --- a/trunk/arch/arm/mm/dma-mapping.c +++ b/trunk/arch/arm/mm/dma-mapping.c @@ -774,27 +774,25 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, void (*op)(const void *, size_t, int)) { - unsigned long pfn; - size_t left = size; - - pfn = page_to_pfn(page) + offset / PAGE_SIZE; - offset %= PAGE_SIZE; - /* * A single sg entry may refer to multiple physically contiguous * pages. But we still need to process highmem pages individually. * If highmem is not configured then the bulk of this loop gets * optimized out. */ + size_t left = size; do { size_t len = left; void *vaddr; - page = pfn_to_page(pfn); - if (PageHighMem(page)) { - if (len + offset > PAGE_SIZE) + if (len + offset > PAGE_SIZE) { + if (offset >= PAGE_SIZE) { + page += offset / PAGE_SIZE; + offset %= PAGE_SIZE; + } len = PAGE_SIZE - offset; + } vaddr = kmap_high_get(page); if (vaddr) { vaddr += offset; @@ -811,7 +809,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, op(vaddr, len, dir); } offset = 0; - pfn++; + page++; left -= len; } while (left); } diff --git a/trunk/arch/arm/mm/mmu.c b/trunk/arch/arm/mm/mmu.c index ce328c7f5c94..9f0610243bd6 100644 --- a/trunk/arch/arm/mm/mmu.c +++ b/trunk/arch/arm/mm/mmu.c @@ -283,7 +283,7 @@ static struct mem_type mem_types[] = { }, [MT_MEMORY_SO] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_MT_UNCACHED | L_PTE_XN, + L_PTE_MT_UNCACHED, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S | PMD_SECT_UNCACHED | PMD_SECT_XN, diff --git a/trunk/arch/arm/plat-versatile/headsmp.S b/trunk/arch/arm/plat-versatile/headsmp.S index b178d44e9eaa..dd703ef09b8d 100644 --- a/trunk/arch/arm/plat-versatile/headsmp.S +++ b/trunk/arch/arm/plat-versatile/headsmp.S @@ -20,7 +20,7 @@ */ ENTRY(versatile_secondary_startup) mrc p15, 0, r0, c0, c0, 5 - bic r0, #0xff000000 + and r0, r0, #15 adr r4, 1f ldmia r4, {r5, r6} sub r4, r4, r5 diff --git a/trunk/arch/arm/vfp/entry.S b/trunk/arch/arm/vfp/entry.S index 323ce1a62bbf..cc926c985981 100644 --- a/trunk/arch/arm/vfp/entry.S +++ b/trunk/arch/arm/vfp/entry.S @@ -22,7 +22,7 @@ @ IRQs disabled. @ ENTRY(do_vfp) -#ifdef CONFIG_PREEMPT_COUNT +#ifdef CONFIG_PREEMPT ldr r4, [r10, #TI_PREEMPT] @ get preempt count add r11, r4, #1 @ increment it str r11, [r10, #TI_PREEMPT] @@ -35,7 +35,7 @@ ENTRY(do_vfp) ENDPROC(do_vfp) ENTRY(vfp_null_entry) -#ifdef CONFIG_PREEMPT_COUNT +#ifdef CONFIG_PREEMPT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it @@ -53,7 +53,7 @@ ENDPROC(vfp_null_entry) __INIT ENTRY(vfp_testing_entry) -#ifdef CONFIG_PREEMPT_COUNT +#ifdef CONFIG_PREEMPT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it diff --git a/trunk/arch/arm/vfp/vfphw.S b/trunk/arch/arm/vfp/vfphw.S index dd5e56f95f3f..ea0349f63586 100644 --- a/trunk/arch/arm/vfp/vfphw.S +++ b/trunk/arch/arm/vfp/vfphw.S @@ -168,7 +168,7 @@ vfp_hw_state_valid: @ else it's one 32-bit instruction, so @ always subtract 4 from the following @ instruction address. -#ifdef CONFIG_PREEMPT_COUNT +#ifdef CONFIG_PREEMPT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it @@ -192,7 +192,7 @@ look_for_VFP_exceptions: @ not recognised by VFP DBGSTR "not VFP" -#ifdef CONFIG_PREEMPT_COUNT +#ifdef CONFIG_PREEMPT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it diff --git a/trunk/arch/mips/bcm47xx/Kconfig b/trunk/arch/mips/bcm47xx/Kconfig index ba611927749b..d7af29f1fcf0 100644 --- a/trunk/arch/mips/bcm47xx/Kconfig +++ b/trunk/arch/mips/bcm47xx/Kconfig @@ -8,10 +8,8 @@ config BCM47XX_SSB select SSB_DRIVER_EXTIF select SSB_EMBEDDED select SSB_B43_PCI_BRIDGE if PCI - select SSB_DRIVER_PCICORE if PCI select SSB_PCICORE_HOSTMODE if PCI select SSB_DRIVER_GPIO - select GPIOLIB default y help Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support. @@ -27,7 +25,6 @@ config BCM47XX_BCMA select BCMA_HOST_PCI if PCI select BCMA_DRIVER_PCI_HOSTMODE if PCI select BCMA_DRIVER_GPIO - select GPIOLIB default y help Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus. diff --git a/trunk/arch/mips/cavium-octeon/executive/cvmx-l2c.c b/trunk/arch/mips/cavium-octeon/executive/cvmx-l2c.c index 33b72144db31..9f883bf76953 100644 --- a/trunk/arch/mips/cavium-octeon/executive/cvmx-l2c.c +++ b/trunk/arch/mips/cavium-octeon/executive/cvmx-l2c.c @@ -30,7 +30,6 @@ * measurement, and debugging facilities. */ -#include #include #include #include @@ -286,22 +285,22 @@ uint64_t cvmx_l2c_read_perf(uint32_t counter) */ static void fault_in(uint64_t addr, int len) { - char *ptr; - + volatile char *ptr; + volatile char dummy; /* * Adjust addr and length so we get all cache lines even for * small ranges spanning two cache lines. */ len += addr & CVMX_CACHE_LINE_MASK; addr &= ~CVMX_CACHE_LINE_MASK; - ptr = cvmx_phys_to_ptr(addr); + ptr = (volatile char *)cvmx_phys_to_ptr(addr); /* * Invalidate L1 cache to make sure all loads result in data * being in L2. */ CVMX_DCACHE_INVALIDATE; while (len > 0) { - ACCESS_ONCE(*ptr); + dummy += *ptr; len -= CVMX_CACHE_LINE_SIZE; ptr += CVMX_CACHE_LINE_SIZE; } diff --git a/trunk/arch/mips/include/uapi/asm/break.h b/trunk/arch/mips/include/asm/break.h similarity index 100% rename from trunk/arch/mips/include/uapi/asm/break.h rename to trunk/arch/mips/include/asm/break.h diff --git a/trunk/arch/mips/include/asm/dsp.h b/trunk/arch/mips/include/asm/dsp.h index 7bfad0520e25..e9bfc0813c72 100644 --- a/trunk/arch/mips/include/asm/dsp.h +++ b/trunk/arch/mips/include/asm/dsp.h @@ -16,7 +16,7 @@ #include #define DSP_DEFAULT 0x00000000 -#define DSP_MASK 0x3f +#define DSP_MASK 0x3ff #define __enable_dsp_hazard() \ do { \ diff --git a/trunk/arch/mips/include/asm/inst.h b/trunk/arch/mips/include/asm/inst.h index 33c34adbecfa..ab84064283db 100644 --- a/trunk/arch/mips/include/asm/inst.h +++ b/trunk/arch/mips/include/asm/inst.h @@ -353,7 +353,6 @@ union mips_instruction { struct u_format u_format; struct c_format c_format; struct r_format r_format; - struct p_format p_format; struct f_format f_format; struct ma_format ma_format; struct b_format b_format; diff --git a/trunk/arch/mips/include/asm/mach-pnx833x/war.h b/trunk/arch/mips/include/asm/mach-pnx833x/war.h index e410df4e1b3a..edaa06d9d492 100644 --- a/trunk/arch/mips/include/asm/mach-pnx833x/war.h +++ b/trunk/arch/mips/include/asm/mach-pnx833x/war.h @@ -21,4 +21,4 @@ #define R10000_LLSC_WAR 0 #define MIPS34K_MISSED_ITLB_WAR 0 -#endif /* __ASM_MIPS_MACH_PNX833X_WAR_H */ +#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */ diff --git a/trunk/arch/mips/include/asm/pgtable-64.h b/trunk/arch/mips/include/asm/pgtable-64.h index 013d5f781263..c63191055e69 100644 --- a/trunk/arch/mips/include/asm/pgtable-64.h +++ b/trunk/arch/mips/include/asm/pgtable-64.h @@ -230,7 +230,6 @@ static inline void pud_clear(pud_t *pudp) #else #define pte_pfn(x) ((unsigned long)((x).pte >> _PFN_SHIFT)) #define pfn_pte(pfn, prot) __pte(((pfn) << _PFN_SHIFT) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) __pmd(((pfn) << _PFN_SHIFT) | pgprot_val(prot)) #endif #define __pgd_offset(address) pgd_index(address) diff --git a/trunk/arch/mips/include/uapi/asm/Kbuild b/trunk/arch/mips/include/uapi/asm/Kbuild index 77d4fb33f75a..a1a0452ac185 100644 --- a/trunk/arch/mips/include/uapi/asm/Kbuild +++ b/trunk/arch/mips/include/uapi/asm/Kbuild @@ -3,7 +3,6 @@ include include/uapi/asm-generic/Kbuild.asm header-y += auxvec.h header-y += bitsperlong.h -header-y += break.h header-y += byteorder.h header-y += cachectl.h header-y += errno.h diff --git a/trunk/arch/mips/kernel/ftrace.c b/trunk/arch/mips/kernel/ftrace.c index 83fa1460e294..6a2d758dd8e9 100644 --- a/trunk/arch/mips/kernel/ftrace.c +++ b/trunk/arch/mips/kernel/ftrace.c @@ -25,12 +25,6 @@ #define MCOUNT_OFFSET_INSNS 4 #endif -/* Arch override because MIPS doesn't need to run this from stop_machine() */ -void arch_ftrace_update_code(int command) -{ - ftrace_modify_all_code(command); -} - /* * Check if the address is in kernel space * @@ -95,24 +89,6 @@ static int ftrace_modify_code(unsigned long ip, unsigned int new_code) return 0; } -#ifndef CONFIG_64BIT -static int ftrace_modify_code_2(unsigned long ip, unsigned int new_code1, - unsigned int new_code2) -{ - int faulted; - - safe_store_code(new_code1, ip, faulted); - if (unlikely(faulted)) - return -EFAULT; - ip += 4; - safe_store_code(new_code2, ip, faulted); - if (unlikely(faulted)) - return -EFAULT; - flush_icache_range(ip, ip + 8); /* original ip + 12 */ - return 0; -} -#endif - /* * The details about the calling site of mcount on MIPS * @@ -155,18 +131,8 @@ int ftrace_make_nop(struct module *mod, * needed. */ new = in_kernel_space(ip) ? INSN_NOP : INSN_B_1F; -#ifdef CONFIG_64BIT + return ftrace_modify_code(ip, new); -#else - /* - * On 32 bit MIPS platforms, gcc adds a stack adjust - * instruction in the delay slot after the branch to - * mcount and expects mcount to restore the sp on return. - * This is based on a legacy API and does nothing but - * waste instructions so it's being removed at runtime. - */ - return ftrace_modify_code_2(ip, new, INSN_NOP); -#endif } int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) diff --git a/trunk/arch/mips/kernel/mcount.S b/trunk/arch/mips/kernel/mcount.S index 165867673357..4c968e7efb74 100644 --- a/trunk/arch/mips/kernel/mcount.S +++ b/trunk/arch/mips/kernel/mcount.S @@ -46,8 +46,9 @@ PTR_L a5, PT_R9(sp) PTR_L a6, PT_R10(sp) PTR_L a7, PT_R11(sp) -#else PTR_ADDIU sp, PT_SIZE +#else + PTR_ADDIU sp, (PT_SIZE + 8) #endif .endm @@ -68,9 +69,7 @@ NESTED(ftrace_caller, PT_SIZE, ra) .globl _mcount _mcount: b ftrace_stub - addiu sp,sp,8 - - /* When tracing is activated, it calls ftrace_caller+8 (aka here) */ + nop lw t1, function_trace_stop bnez t1, ftrace_stub nop diff --git a/trunk/arch/mips/kernel/vpe.c b/trunk/arch/mips/kernel/vpe.c index 147cec19621d..eec690af6581 100644 --- a/trunk/arch/mips/kernel/vpe.c +++ b/trunk/arch/mips/kernel/vpe.c @@ -705,7 +705,7 @@ static int vpe_run(struct vpe * v) printk(KERN_WARNING "VPE loader: TC %d is already in use.\n", - v->tc->index); + t->index); return -ENOEXEC; } } else { diff --git a/trunk/arch/mips/lantiq/irq.c b/trunk/arch/mips/lantiq/irq.c index a7935bf0fecb..f36acd1b3808 100644 --- a/trunk/arch/mips/lantiq/irq.c +++ b/trunk/arch/mips/lantiq/irq.c @@ -408,7 +408,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent) #endif /* tell oprofile which irq to use */ - cp0_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ); + cp0_perfcount_irq = LTQ_PERF_IRQ; /* * if the timer irq is not one of the mips irqs we need to diff --git a/trunk/arch/mips/lib/delay.c b/trunk/arch/mips/lib/delay.c index 288f7954988d..dc81ca8dc0dd 100644 --- a/trunk/arch/mips/lib/delay.c +++ b/trunk/arch/mips/lib/delay.c @@ -21,7 +21,7 @@ void __delay(unsigned long loops) " .set noreorder \n" " .align 3 \n" "1: bnez %0, 1b \n" -#if BITS_PER_LONG == 32 +#if __SIZEOF_LONG__ == 4 " subu %0, 1 \n" #else " dsubu %0, 1 \n" diff --git a/trunk/arch/mips/mm/ioremap.c b/trunk/arch/mips/mm/ioremap.c index cacfd31e8ec9..7657fd21cd3f 100644 --- a/trunk/arch/mips/mm/ioremap.c +++ b/trunk/arch/mips/mm/ioremap.c @@ -190,3 +190,9 @@ void __iounmap(const volatile void __iomem *addr) EXPORT_SYMBOL(__ioremap); EXPORT_SYMBOL(__iounmap); + +int __virt_addr_valid(const volatile void *kaddr) +{ + return pfn_valid(PFN_DOWN(virt_to_phys(kaddr))); +} +EXPORT_SYMBOL_GPL(__virt_addr_valid); diff --git a/trunk/arch/mips/mm/mmap.c b/trunk/arch/mips/mm/mmap.c index 7e5fe2790d8a..d9be7540a6be 100644 --- a/trunk/arch/mips/mm/mmap.c +++ b/trunk/arch/mips/mm/mmap.c @@ -192,9 +192,3 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) return ret; } - -int __virt_addr_valid(const volatile void *kaddr) -{ - return pfn_valid(PFN_DOWN(virt_to_phys(kaddr))); -} -EXPORT_SYMBOL_GPL(__virt_addr_valid); diff --git a/trunk/arch/mips/netlogic/xlr/setup.c b/trunk/arch/mips/netlogic/xlr/setup.c index c5ce6992ac4c..4e7f49d3d5a8 100644 --- a/trunk/arch/mips/netlogic/xlr/setup.c +++ b/trunk/arch/mips/netlogic/xlr/setup.c @@ -193,11 +193,8 @@ static void nlm_init_node(void) void __init prom_init(void) { - int *argv, *envp; /* passed as 32 bit ptrs */ + int i, *argv, *envp; /* passed as 32 bit ptrs */ struct psb_info *prom_infop; -#ifdef CONFIG_SMP - int i; -#endif /* truncate to 32 bit and sign extend all args */ argv = (int *)(long)(int)fw_arg1; diff --git a/trunk/arch/mips/pci/pci-ar71xx.c b/trunk/arch/mips/pci/pci-ar71xx.c index 6eaa4f2d0e38..1552522b8718 100644 --- a/trunk/arch/mips/pci/pci-ar71xx.c +++ b/trunk/arch/mips/pci/pci-ar71xx.c @@ -24,7 +24,7 @@ #include #define AR71XX_PCI_MEM_BASE 0x10000000 -#define AR71XX_PCI_MEM_SIZE 0x07000000 +#define AR71XX_PCI_MEM_SIZE 0x08000000 #define AR71XX_PCI_WIN0_OFFS 0x10000000 #define AR71XX_PCI_WIN1_OFFS 0x11000000 diff --git a/trunk/arch/mips/pci/pci-ar724x.c b/trunk/arch/mips/pci/pci-ar724x.c index c11c75be2d7e..86d77a666458 100644 --- a/trunk/arch/mips/pci/pci-ar724x.c +++ b/trunk/arch/mips/pci/pci-ar724x.c @@ -21,7 +21,7 @@ #define AR724X_PCI_CTRL_SIZE 0x100 #define AR724X_PCI_MEM_BASE 0x10000000 -#define AR724X_PCI_MEM_SIZE 0x04000000 +#define AR724X_PCI_MEM_SIZE 0x08000000 #define AR724X_PCI_REG_RESET 0x18 #define AR724X_PCI_REG_INT_STATUS 0x4c diff --git a/trunk/arch/powerpc/kernel/entry_32.S b/trunk/arch/powerpc/kernel/entry_32.S index e514de57a125..d22e73e4618b 100644 --- a/trunk/arch/powerpc/kernel/entry_32.S +++ b/trunk/arch/powerpc/kernel/entry_32.S @@ -439,8 +439,6 @@ ret_from_fork: ret_from_kernel_thread: REST_NVGPRS(r1) bl schedule_tail - li r3,0 - stw r3,0(r1) mtlr r14 mr r3,r15 PPC440EP_ERR42 diff --git a/trunk/arch/powerpc/kernel/entry_64.S b/trunk/arch/powerpc/kernel/entry_64.S index 3d990d3bd8ba..b310a0573625 100644 --- a/trunk/arch/powerpc/kernel/entry_64.S +++ b/trunk/arch/powerpc/kernel/entry_64.S @@ -664,19 +664,6 @@ resume_kernel: ld r4,TI_FLAGS(r9) andi. r0,r4,_TIF_NEED_RESCHED bne 1b - - /* - * arch_local_irq_restore() from preempt_schedule_irq above may - * enable hard interrupt but we really should disable interrupts - * when we return from the interrupt, and so that we don't get - * interrupted after loading SRR0/1. - */ -#ifdef CONFIG_PPC_BOOK3E - wrteei 0 -#else - ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */ - mtmsrd r10,1 /* Update machine state */ -#endif /* CONFIG_PPC_BOOK3E */ #endif /* CONFIG_PREEMPT */ .globl fast_exc_return_irq diff --git a/trunk/arch/powerpc/kernel/kgdb.c b/trunk/arch/powerpc/kernel/kgdb.c index a7bc7521c064..c470a40b29f5 100644 --- a/trunk/arch/powerpc/kernel/kgdb.c +++ b/trunk/arch/powerpc/kernel/kgdb.c @@ -154,12 +154,12 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs) static int kgdb_singlestep(struct pt_regs *regs) { struct thread_info *thread_info, *exception_thread_info; - struct thread_info *backup_current_thread_info; + struct thread_info *backup_current_thread_info = \ + (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL); if (user_mode(regs)) return 0; - backup_current_thread_info = (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL); /* * On Book E and perhaps other processors, singlestep is handled on * the critical exception stack. This causes current_thread_info() @@ -185,7 +185,6 @@ static int kgdb_singlestep(struct pt_regs *regs) /* Restore current_thread_info lastly. */ memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info); - kfree(backup_current_thread_info); return 1; } diff --git a/trunk/arch/powerpc/kernel/time.c b/trunk/arch/powerpc/kernel/time.c index 127361e093f4..6f6b1cccc916 100644 --- a/trunk/arch/powerpc/kernel/time.c +++ b/trunk/arch/powerpc/kernel/time.c @@ -494,15 +494,10 @@ void timer_interrupt(struct pt_regs * regs) set_dec(DECREMENTER_MAX); /* Some implementations of hotplug will get timer interrupts while - * offline, just ignore these and we also need to set - * decrementers_next_tb as MAX to make sure __check_irq_replay - * don't replay timer interrupt when return, otherwise we'll trap - * here infinitely :( + * offline, just ignore these */ - if (!cpu_online(smp_processor_id())) { - *next_tb = ~(u64)0; + if (!cpu_online(smp_processor_id())) return; - } /* Conditionally hard-enable interrupts now that the DEC has been * bumped to its maximum value diff --git a/trunk/arch/powerpc/kvm/emulate.c b/trunk/arch/powerpc/kvm/emulate.c index 9d9cddc5b346..b0855e5d8905 100644 --- a/trunk/arch/powerpc/kvm/emulate.c +++ b/trunk/arch/powerpc/kvm/emulate.c @@ -39,7 +39,6 @@ #define OP_31_XOP_TRAP 4 #define OP_31_XOP_LWZX 23 #define OP_31_XOP_TRAP_64 68 -#define OP_31_XOP_DCBF 86 #define OP_31_XOP_LBZX 87 #define OP_31_XOP_STWX 151 #define OP_31_XOP_STBX 215 @@ -375,7 +374,6 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) emulated = kvmppc_emulate_mtspr(vcpu, sprn, rs); break; - case OP_31_XOP_DCBF: case OP_31_XOP_DCBI: /* Do nothing. The guest is performing dcbi because * hardware DMA is not snooped by the dcache, but diff --git a/trunk/arch/powerpc/mm/hash_low_64.S b/trunk/arch/powerpc/mm/hash_low_64.S index 7443481a315c..56585086413a 100644 --- a/trunk/arch/powerpc/mm/hash_low_64.S +++ b/trunk/arch/powerpc/mm/hash_low_64.S @@ -115,13 +115,11 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) sldi r29,r5,SID_SHIFT - VPN_SHIFT rldicl r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT) or r29,r28,r29 - /* - * Calculate hash value for primary slot and store it in r28 - * r3 = va, r5 = vsid - * r0 = (va >> 12) & ((1ul << (28 - 12)) -1) - */ - rldicl r0,r3,64-12,48 - xor r28,r5,r0 /* hash */ + + /* Calculate hash value for primary slot and store it in r28 */ + rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */ + rldicl r0,r3,64-12,48 /* (ea >> 12) & 0xffff */ + xor r28,r5,r0 b 4f 3: /* Calc vpn and put it in r29 */ @@ -132,12 +130,11 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) /* * calculate hash value for primary slot and * store it in r28 for 1T segment - * r3 = va, r5 = vsid */ - sldi r28,r5,25 /* vsid << 25 */ - /* r0 = (va >> 12) & ((1ul << (40 - 12)) -1) */ - rldicl r0,r3,64-12,36 - xor r28,r28,r5 /* vsid ^ ( vsid << 25) */ + rldic r28,r5,25,25 /* (vsid << 25) & 0x7fffffffff */ + clrldi r5,r5,40 /* vsid & 0xffffff */ + rldicl r0,r3,64-12,36 /* (ea >> 12) & 0xfffffff */ + xor r28,r28,r5 xor r28,r28,r0 /* hash */ /* Convert linux PTE bits into HW equivalents */ @@ -410,13 +407,11 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) */ rldicl r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT) or r29,r28,r29 - /* - * Calculate hash value for primary slot and store it in r28 - * r3 = va, r5 = vsid - * r0 = (va >> 12) & ((1ul << (28 - 12)) -1) - */ - rldicl r0,r3,64-12,48 - xor r28,r5,r0 /* hash */ + + /* Calculate hash value for primary slot and store it in r28 */ + rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */ + rldicl r0,r3,64-12,48 /* (ea >> 12) & 0xffff */ + xor r28,r5,r0 b 4f 3: /* Calc vpn and put it in r29 */ @@ -431,12 +426,11 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) /* * Calculate hash value for primary slot and * store it in r28 for 1T segment - * r3 = va, r5 = vsid */ - sldi r28,r5,25 /* vsid << 25 */ - /* r0 = (va >> 12) & ((1ul << (40 - 12)) -1) */ - rldicl r0,r3,64-12,36 - xor r28,r28,r5 /* vsid ^ ( vsid << 25) */ + rldic r28,r5,25,25 /* (vsid << 25) & 0x7fffffffff */ + clrldi r5,r5,40 /* vsid & 0xffffff */ + rldicl r0,r3,64-12,36 /* (ea >> 12) & 0xfffffff */ + xor r28,r28,r5 xor r28,r28,r0 /* hash */ /* Convert linux PTE bits into HW equivalents */ @@ -758,27 +752,25 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) rldicl r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT) or r29,r28,r29 - /* Calculate hash value for primary slot and store it in r28 - * r3 = va, r5 = vsid - * r0 = (va >> 16) & ((1ul << (28 - 16)) -1) - */ - rldicl r0,r3,64-16,52 - xor r28,r5,r0 /* hash */ + /* Calculate hash value for primary slot and store it in r28 */ + rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */ + rldicl r0,r3,64-16,52 /* (ea >> 16) & 0xfff */ + xor r28,r5,r0 b 4f 3: /* Calc vpn and put it in r29 */ sldi r29,r5,SID_SHIFT_1T - VPN_SHIFT rldicl r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT_1T - VPN_SHIFT) or r29,r28,r29 + /* * calculate hash value for primary slot and * store it in r28 for 1T segment - * r3 = va, r5 = vsid */ - sldi r28,r5,25 /* vsid << 25 */ - /* r0 = (va >> 16) & ((1ul << (40 - 16)) -1) */ - rldicl r0,r3,64-16,40 - xor r28,r28,r5 /* vsid ^ ( vsid << 25) */ + rldic r28,r5,25,25 /* (vsid << 25) & 0x7fffffffff */ + clrldi r5,r5,40 /* vsid & 0xffffff */ + rldicl r0,r3,64-16,40 /* (ea >> 16) & 0xffffff */ + xor r28,r28,r5 xor r28,r28,r0 /* hash */ /* Convert linux PTE bits into HW equivalents */ diff --git a/trunk/arch/powerpc/oprofile/op_model_power4.c b/trunk/arch/powerpc/oprofile/op_model_power4.c index f444b94935f5..315f9495e9b2 100644 --- a/trunk/arch/powerpc/oprofile/op_model_power4.c +++ b/trunk/arch/powerpc/oprofile/op_model_power4.c @@ -52,7 +52,7 @@ static int power7_marked_instr_event(u64 mmcr1) for (pmc = 0; pmc < 4; pmc++) { psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK << (OPROFILE_MAX_PMC_NUM - pmc) - * OPROFILE_PMSEL_FIELD_WIDTH); + * OPROFILE_MAX_PMC_NUM); psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc) * OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL; unit = mmcr1 & (OPROFILE_PM_UNIT_MSK diff --git a/trunk/arch/powerpc/platforms/pasemi/cpufreq.c b/trunk/arch/powerpc/platforms/pasemi/cpufreq.c index 890f30e70f98..95d00173029f 100644 --- a/trunk/arch/powerpc/platforms/pasemi/cpufreq.c +++ b/trunk/arch/powerpc/platforms/pasemi/cpufreq.c @@ -236,13 +236,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) { - /* - * We don't support CPU hotplug. Don't unmap after the system - * has already made it to a running state. - */ - if (system_state != SYSTEM_BOOTING) - return 0; - if (sdcasr_mapbase) iounmap(sdcasr_mapbase); if (sdcpwr_mapbase) diff --git a/trunk/arch/s390/include/asm/pgtable.h b/trunk/arch/s390/include/asm/pgtable.h index 098adbb62660..c1d7930a82f4 100644 --- a/trunk/arch/s390/include/asm/pgtable.h +++ b/trunk/arch/s390/include/asm/pgtable.h @@ -1365,18 +1365,6 @@ static inline void pmdp_invalidate(struct vm_area_struct *vma, __pmd_idte(address, pmdp); } -#define __HAVE_ARCH_PMDP_SET_WRPROTECT -static inline void pmdp_set_wrprotect(struct mm_struct *mm, - unsigned long address, pmd_t *pmdp) -{ - pmd_t pmd = *pmdp; - - if (pmd_write(pmd)) { - __pmd_idte(address, pmdp); - set_pmd_at(mm, address, pmdp, pmd_wrprotect(pmd)); - } -} - static inline pmd_t mk_pmd_phys(unsigned long physpage, pgprot_t pgprot) { pmd_t __pmd; diff --git a/trunk/arch/x86/Kconfig b/trunk/arch/x86/Kconfig index 225543bf45a5..79795af59810 100644 --- a/trunk/arch/x86/Kconfig +++ b/trunk/arch/x86/Kconfig @@ -2138,7 +2138,6 @@ config OLPC_XO1_RTC config OLPC_XO1_SCI bool "OLPC XO-1 SCI extras" depends on OLPC && OLPC_XO1_PM - depends on INPUT=y select POWER_SUPPLY select GPIO_CS5535 select MFD_CORE diff --git a/trunk/arch/x86/boot/Makefile b/trunk/arch/x86/boot/Makefile index 379814bc41e3..ccce0ed67dde 100644 --- a/trunk/arch/x86/boot/Makefile +++ b/trunk/arch/x86/boot/Makefile @@ -71,7 +71,7 @@ GCOV_PROFILE := n $(obj)/bzImage: asflags-y := $(SVGA_MODE) quiet_cmd_image = BUILD $@ -cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/zoffset.h > $@ +cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin > $@ $(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE $(call if_changed,image) @@ -92,7 +92,7 @@ targets += voffset.h $(obj)/voffset.h: vmlinux FORCE $(call if_changed,voffset) -sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|startup_64\|efi_pe_entry\|efi_stub_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p' +sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p' quiet_cmd_zoffset = ZOFFSET $@ cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@ diff --git a/trunk/arch/x86/boot/compressed/eboot.c b/trunk/arch/x86/boot/compressed/eboot.c index f8fa41190c35..18e329ca108e 100644 --- a/trunk/arch/x86/boot/compressed/eboot.c +++ b/trunk/arch/x86/boot/compressed/eboot.c @@ -256,10 +256,10 @@ static efi_status_t setup_efi_pci(struct boot_params *params) int i; struct setup_data *data; - data = (struct setup_data *)(unsigned long)params->hdr.setup_data; + data = (struct setup_data *)params->hdr.setup_data; while (data && data->next) - data = (struct setup_data *)(unsigned long)data->next; + data = (struct setup_data *)data->next; status = efi_call_phys5(sys_table->boottime->locate_handle, EFI_LOCATE_BY_PROTOCOL, &pci_proto, @@ -295,18 +295,16 @@ static efi_status_t setup_efi_pci(struct boot_params *params) if (!pci) continue; -#ifdef CONFIG_X86_64 status = efi_call_phys4(pci->attributes, pci, EfiPciIoAttributeOperationGet, 0, &attributes); -#else - status = efi_call_phys5(pci->attributes, pci, - EfiPciIoAttributeOperationGet, 0, 0, - &attributes); -#endif + if (status != EFI_SUCCESS) continue; + if (!(attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM)) + continue; + if (!pci->romimage || !pci->romsize) continue; @@ -347,9 +345,9 @@ static efi_status_t setup_efi_pci(struct boot_params *params) memcpy(rom->romdata, pci->romimage, pci->romsize); if (data) - data->next = (unsigned long)rom; + data->next = (uint64_t)rom; else - params->hdr.setup_data = (unsigned long)rom; + params->hdr.setup_data = (uint64_t)rom; data = (struct setup_data *)rom; @@ -434,9 +432,10 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto, * Once we've found a GOP supporting ConOut, * don't bother looking any further. */ - first_gop = gop; if (conout_found) break; + + first_gop = gop; } } diff --git a/trunk/arch/x86/boot/compressed/head_32.S b/trunk/arch/x86/boot/compressed/head_32.S index 1e3184f6072f..aa4aaf1b2380 100644 --- a/trunk/arch/x86/boot/compressed/head_32.S +++ b/trunk/arch/x86/boot/compressed/head_32.S @@ -35,11 +35,11 @@ ENTRY(startup_32) #ifdef CONFIG_EFI_STUB jmp preferred_addr + .balign 0x10 /* * We don't need the return address, so set up the stack so - * efi_main() can find its arguments. + * efi_main() can find its arugments. */ -ENTRY(efi_pe_entry) add $0x4, %esp call make_boot_params @@ -50,10 +50,8 @@ ENTRY(efi_pe_entry) pushl %eax pushl %esi pushl %ecx - sub $0x4, %esp -ENTRY(efi_stub_entry) - add $0x4, %esp + .org 0x30,0x90 call efi_main cmpl $0, %eax movl %eax, %esi diff --git a/trunk/arch/x86/boot/compressed/head_64.S b/trunk/arch/x86/boot/compressed/head_64.S index f5d1aaa0dec8..2c4b171eec33 100644 --- a/trunk/arch/x86/boot/compressed/head_64.S +++ b/trunk/arch/x86/boot/compressed/head_64.S @@ -201,12 +201,12 @@ ENTRY(startup_64) */ #ifdef CONFIG_EFI_STUB /* - * The entry point for the PE/COFF executable is efi_pe_entry, so - * only legacy boot loaders will execute this jmp. + * The entry point for the PE/COFF executable is 0x210, so only + * legacy boot loaders will execute this jmp. */ jmp preferred_addr -ENTRY(efi_pe_entry) + .org 0x210 mov %rcx, %rdi mov %rdx, %rsi pushq %rdi @@ -218,7 +218,7 @@ ENTRY(efi_pe_entry) popq %rsi popq %rdi -ENTRY(efi_stub_entry) + .org 0x230,0x90 call efi_main movq %rax,%rsi cmpq $0,%rax diff --git a/trunk/arch/x86/boot/header.S b/trunk/arch/x86/boot/header.S index 944ce595f767..8c132a625b94 100644 --- a/trunk/arch/x86/boot/header.S +++ b/trunk/arch/x86/boot/header.S @@ -21,7 +21,6 @@ #include #include #include -#include #include "boot.h" #include "voffset.h" #include "zoffset.h" @@ -256,9 +255,6 @@ section_table: # header, from the old boot sector. .section ".header", "a" - .globl sentinel -sentinel: .byte 0xff, 0xff /* Used to detect broken loaders */ - .globl hdr hdr: setup_sects: .byte 0 /* Filled in by build.c */ @@ -283,7 +279,7 @@ _start: # Part 2 of the header, from the old setup.S .ascii "HdrS" # header signature - .word 0x020c # header version number (>= 0x0105) + .word 0x020b # header version number (>= 0x0105) # or else old loadlin-1.5 will fail) .globl realmode_swtch realmode_swtch: .word 0, 0 # default_switch, SETUPSEG @@ -301,7 +297,13 @@ type_of_loader: .byte 0 # 0 means ancient bootloader, newer # flags, unused bits must be zero (RFU) bit within loadflags loadflags: - .byte LOADED_HIGH # The kernel is to be loaded high +LOADED_HIGH = 1 # If set, the kernel is loaded high +CAN_USE_HEAP = 0x80 # If set, the loader also has set + # heap_end_ptr to tell how much + # space behind setup.S can be used for + # heap purposes. + # Only the loader knows what is free + .byte LOADED_HIGH setup_move_size: .word 0x8000 # size to move, when setup is not # loaded at 0x90000. We will move setup @@ -367,23 +369,7 @@ relocatable_kernel: .byte 1 relocatable_kernel: .byte 0 #endif min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment - -xloadflags: -#ifdef CONFIG_X86_64 -# define XLF0 XLF_KERNEL_64 /* 64-bit kernel */ -#else -# define XLF0 0 -#endif -#ifdef CONFIG_EFI_STUB -# ifdef CONFIG_X86_64 -# define XLF23 XLF_EFI_HANDOVER_64 /* 64-bit EFI handover ok */ -# else -# define XLF23 XLF_EFI_HANDOVER_32 /* 32-bit EFI handover ok */ -# endif -#else -# define XLF23 0 -#endif - .word XLF0 | XLF23 +pad3: .word 0 cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, #added with boot protocol @@ -411,13 +397,8 @@ pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr #define INIT_SIZE VO_INIT_SIZE #endif init_size: .long INIT_SIZE # kernel initialization size -handover_offset: -#ifdef CONFIG_EFI_STUB - .long 0x30 # offset to the handover +handover_offset: .long 0x30 # offset to the handover # protocol entry point -#else - .long 0 -#endif # End of setup header ##################################################### diff --git a/trunk/arch/x86/boot/setup.ld b/trunk/arch/x86/boot/setup.ld index 96a6c7563538..03c0683636b6 100644 --- a/trunk/arch/x86/boot/setup.ld +++ b/trunk/arch/x86/boot/setup.ld @@ -13,7 +13,7 @@ SECTIONS .bstext : { *(.bstext) } .bsdata : { *(.bsdata) } - . = 495; + . = 497; .header : { *(.header) } .entrytext : { *(.entrytext) } .inittext : { *(.inittext) } diff --git a/trunk/arch/x86/boot/tools/build.c b/trunk/arch/x86/boot/tools/build.c index 94c544650020..4b8e165ee572 100644 --- a/trunk/arch/x86/boot/tools/build.c +++ b/trunk/arch/x86/boot/tools/build.c @@ -52,10 +52,6 @@ int is_big_kernel; #define PECOFF_RELOC_RESERVE 0x20 -unsigned long efi_stub_entry; -unsigned long efi_pe_entry; -unsigned long startup_64; - /*----------------------------------------------------------------------*/ static const u32 crctab32[] = { @@ -136,7 +132,7 @@ static void die(const char * str, ...) static void usage(void) { - die("Usage: build setup system [zoffset.h] [> image]"); + die("Usage: build setup system [> image]"); } #ifdef CONFIG_EFI_STUB @@ -210,54 +206,30 @@ static void update_pecoff_text(unsigned int text_start, unsigned int file_sz) */ put_unaligned_le32(file_sz - 512, &buf[pe_header + 0x1c]); +#ifdef CONFIG_X86_32 /* - * Address of entry point for PE/COFF executable + * Address of entry point. + * + * The EFI stub entry point is +16 bytes from the start of + * the .text section. */ - put_unaligned_le32(text_start + efi_pe_entry, &buf[pe_header + 0x28]); + put_unaligned_le32(text_start + 16, &buf[pe_header + 0x28]); +#else + /* + * Address of entry point. startup_32 is at the beginning and + * the 64-bit entry point (startup_64) is always 512 bytes + * after. The EFI stub entry point is 16 bytes after that, as + * the first instruction allows legacy loaders to jump over + * the EFI stub initialisation + */ + put_unaligned_le32(text_start + 528, &buf[pe_header + 0x28]); +#endif /* CONFIG_X86_32 */ update_pecoff_section_header(".text", text_start, text_sz); } #endif /* CONFIG_EFI_STUB */ - -/* - * Parse zoffset.h and find the entry points. We could just #include zoffset.h - * but that would mean tools/build would have to be rebuilt every time. It's - * not as if parsing it is hard... - */ -#define PARSE_ZOFS(p, sym) do { \ - if (!strncmp(p, "#define ZO_" #sym " ", 11+sizeof(#sym))) \ - sym = strtoul(p + 11 + sizeof(#sym), NULL, 16); \ -} while (0) - -static void parse_zoffset(char *fname) -{ - FILE *file; - char *p; - int c; - - file = fopen(fname, "r"); - if (!file) - die("Unable to open `%s': %m", fname); - c = fread(buf, 1, sizeof(buf) - 1, file); - if (ferror(file)) - die("read-error on `zoffset.h'"); - buf[c] = 0; - - p = (char *)buf; - - while (p && *p) { - PARSE_ZOFS(p, efi_stub_entry); - PARSE_ZOFS(p, efi_pe_entry); - PARSE_ZOFS(p, startup_64); - - p = strchr(p, '\n'); - while (p && (*p == '\r' || *p == '\n')) - p++; - } -} - int main(int argc, char ** argv) { unsigned int i, sz, setup_sectors; @@ -269,19 +241,7 @@ int main(int argc, char ** argv) void *kernel; u32 crc = 0xffffffffUL; - /* Defaults for old kernel */ -#ifdef CONFIG_X86_32 - efi_pe_entry = 0x10; - efi_stub_entry = 0x30; -#else - efi_pe_entry = 0x210; - efi_stub_entry = 0x230; - startup_64 = 0x200; -#endif - - if (argc == 4) - parse_zoffset(argv[3]); - else if (argc != 3) + if (argc != 3) usage(); /* Copy the setup code */ @@ -339,11 +299,6 @@ int main(int argc, char ** argv) #ifdef CONFIG_EFI_STUB update_pecoff_text(setup_sectors * 512, sz + i + ((sys_size * 16) - sz)); - -#ifdef CONFIG_X86_64 /* Yes, this is really how we defined it :( */ - efi_stub_entry -= 0x200; -#endif - put_unaligned_le32(efi_stub_entry, &buf[0x264]); #endif crc = partial_crc32(buf, i, crc); diff --git a/trunk/arch/x86/include/asm/efi.h b/trunk/arch/x86/include/asm/efi.h index 28677c55113f..6e8fdf5ad113 100644 --- a/trunk/arch/x86/include/asm/efi.h +++ b/trunk/arch/x86/include/asm/efi.h @@ -94,7 +94,6 @@ extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, #endif /* CONFIG_X86_32 */ extern int add_efi_memmap; -extern unsigned long x86_efi_facility; extern void efi_set_executable(efi_memory_desc_t *md, bool executable); extern int efi_memblock_x86_reserve_range(void); extern void efi_call_phys_prelog(void); diff --git a/trunk/arch/x86/include/asm/uv/uv.h b/trunk/arch/x86/include/asm/uv/uv.h index 062921ef34e9..b47c2a82ff15 100644 --- a/trunk/arch/x86/include/asm/uv/uv.h +++ b/trunk/arch/x86/include/asm/uv/uv.h @@ -16,7 +16,7 @@ extern void uv_system_init(void); extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, struct mm_struct *mm, unsigned long start, - unsigned long end, + unsigned end, unsigned int cpu); #else /* X86_UV */ diff --git a/trunk/arch/x86/include/uapi/asm/bootparam.h b/trunk/arch/x86/include/uapi/asm/bootparam.h index c15ddaf90710..92862cd90201 100644 --- a/trunk/arch/x86/include/uapi/asm/bootparam.h +++ b/trunk/arch/x86/include/uapi/asm/bootparam.h @@ -1,31 +1,6 @@ #ifndef _ASM_X86_BOOTPARAM_H #define _ASM_X86_BOOTPARAM_H -/* setup_data types */ -#define SETUP_NONE 0 -#define SETUP_E820_EXT 1 -#define SETUP_DTB 2 -#define SETUP_PCI 3 - -/* ram_size flags */ -#define RAMDISK_IMAGE_START_MASK 0x07FF -#define RAMDISK_PROMPT_FLAG 0x8000 -#define RAMDISK_LOAD_FLAG 0x4000 - -/* loadflags */ -#define LOADED_HIGH (1<<0) -#define QUIET_FLAG (1<<5) -#define KEEP_SEGMENTS (1<<6) -#define CAN_USE_HEAP (1<<7) - -/* xloadflags */ -#define XLF_KERNEL_64 (1<<0) -#define XLF_CAN_BE_LOADED_ABOVE_4G (1<<1) -#define XLF_EFI_HANDOVER_32 (1<<2) -#define XLF_EFI_HANDOVER_64 (1<<3) - -#ifndef __ASSEMBLY__ - #include #include #include @@ -34,6 +9,12 @@ #include #include