diff --git a/[refs] b/[refs] index ef8311844212..87c94776c1a2 100644 --- a/[refs] +++ b/[refs] @@ -1,2 +1,2 @@ --- -refs/heads/master: b17b849946e581ad58af74933d4fb63ad8812937 +refs/heads/master: 9d1f8a40ddab65a5cedb69b369ee4c0c6e4acf6b diff --git a/trunk/.mailmap b/trunk/.mailmap index 1eba28acab64..581fd39193a2 100644 --- a/trunk/.mailmap +++ b/trunk/.mailmap @@ -23,7 +23,6 @@ Andy Adamson Arnaud Patard Arnd Bergmann Axel Dyks -Axel Lin Ben Gardner Ben M Cahill Björn Steinbrink diff --git a/trunk/Documentation/DocBook/device-drivers.tmpl b/trunk/Documentation/DocBook/device-drivers.tmpl index 36f63d4a0a06..35447e081736 100644 --- a/trunk/Documentation/DocBook/device-drivers.tmpl +++ b/trunk/Documentation/DocBook/device-drivers.tmpl @@ -217,8 +217,8 @@ X!Isound/sound_firmware.c 16x50 UART Driver !Iinclude/linux/serial_core.h -!Edrivers/tty/serial/serial_core.c -!Edrivers/tty/serial/8250.c +!Edrivers/serial/serial_core.c +!Edrivers/serial/8250.c diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt index 89835a4766a6..b72e071a3e5b 100644 --- a/trunk/Documentation/kernel-parameters.txt +++ b/trunk/Documentation/kernel-parameters.txt @@ -43,11 +43,11 @@ parameter is applicable: AVR32 AVR32 architecture is enabled. AX25 Appropriate AX.25 support is enabled. BLACKFIN Blackfin architecture is enabled. - DRM Direct Rendering Management support is enabled. - DYNAMIC_DEBUG Build in debug messages and enable them at runtime EDD BIOS Enhanced Disk Drive Services (EDD) is enabled EFI EFI Partitioning (GPT) is enabled EIDE EIDE/ATAPI support is enabled. + DRM Direct Rendering Management support is enabled. + DYNAMIC_DEBUG Build in debug messages and enable them at runtime FB The frame buffer device is enabled. GCOV GCOV profiling is enabled. HW Appropriate hardware is enabled. diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS index cf0f3a5c09cc..55592f8b672c 100644 --- a/trunk/MAINTAINERS +++ b/trunk/MAINTAINERS @@ -3674,28 +3674,6 @@ F: include/linux/key-type.h F: include/keys/ F: security/keys/ -KEYS-TRUSTED -M: David Safford -M: Mimi Zohar -L: linux-security-module@vger.kernel.org -L: keyrings@linux-nfs.org -S: Supported -F: Documentation/keys-trusted-encrypted.txt -F: include/keys/trusted-type.h -F: security/keys/trusted.c -F: security/keys/trusted.h - -KEYS-ENCRYPTED -M: Mimi Zohar -M: David Safford -L: linux-security-module@vger.kernel.org -L: keyrings@linux-nfs.org -S: Supported -F: Documentation/keys-trusted-encrypted.txt -F: include/keys/encrypted-type.h -F: security/keys/encrypted.c -F: security/keys/encrypted.h - KGDB / KDB /debug_core M: Jason Wessel W: http://kgdb.wiki.kernel.org/ diff --git a/trunk/arch/arm/include/asm/hardware/sp810.h b/trunk/arch/arm/include/asm/hardware/sp810.h index 721847dc68ab..a101f10bb5b1 100644 --- a/trunk/arch/arm/include/asm/hardware/sp810.h +++ b/trunk/arch/arm/include/asm/hardware/sp810.h @@ -50,12 +50,6 @@ #define SCPCELLID2 0xFF8 #define SCPCELLID3 0xFFC -#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15) -#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15) - -#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17) -#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17) - static inline void sysctl_soft_reset(void __iomem *base) { /* writing any value to SCSYSSTAT reg will reset system */ diff --git a/trunk/arch/arm/include/asm/memory.h b/trunk/arch/arm/include/asm/memory.h index d0ee74b7cf86..23c2e8e5c0fa 100644 --- a/trunk/arch/arm/include/asm/memory.h +++ b/trunk/arch/arm/include/asm/memory.h @@ -188,7 +188,7 @@ * translation for translating DMA addresses. Use the driver * DMA support - see dma-mapping.h. */ -static inline unsigned long virt_to_phys(const volatile void *x) +static inline unsigned long virt_to_phys(void *x) { return __virt_to_phys((unsigned long)(x)); } diff --git a/trunk/arch/arm/kernel/smp_twd.c b/trunk/arch/arm/kernel/smp_twd.c index 60636f499cb3..fd9156698ab9 100644 --- a/trunk/arch/arm/kernel/smp_twd.c +++ b/trunk/arch/arm/kernel/smp_twd.c @@ -36,7 +36,6 @@ static void twd_set_mode(enum clock_event_mode mode, /* timer load already set up */ ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_PERIODIC; - __raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD); break; case CLOCK_EVT_MODE_ONESHOT: /* period set, and timer enabled in 'next_event' hook */ @@ -82,7 +81,7 @@ int twd_timer_ack(void) static void __cpuinit twd_calibrate_rate(void) { - unsigned long count; + unsigned long load, count; u64 waitjiffies; /* @@ -117,6 +116,10 @@ static void __cpuinit twd_calibrate_rate(void) printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000, (twd_timer_rate / 1000000) % 100); } + + load = twd_timer_rate / HZ; + + __raw_writel(load, twd_base + TWD_TIMER_LOAD); } /* diff --git a/trunk/arch/arm/mach-ep93xx/gpio.c b/trunk/arch/arm/mach-ep93xx/gpio.c index bec34b834958..f3dc76fdcea8 100644 --- a/trunk/arch/arm/mach-ep93xx/gpio.c +++ b/trunk/arch/arm/mach-ep93xx/gpio.c @@ -427,13 +427,6 @@ void __init ep93xx_gpio_init(void) { int i; - /* Set Ports C, D, E, G, and H for GPIO use */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK | - EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) gpiochip_add(&ep93xx_gpio_banks[i].chip); } diff --git a/trunk/arch/arm/mach-omap1/Kconfig b/trunk/arch/arm/mach-omap1/Kconfig index e0a028161dde..8d2f2daba0c0 100644 --- a/trunk/arch/arm/mach-omap1/Kconfig +++ b/trunk/arch/arm/mach-omap1/Kconfig @@ -9,7 +9,6 @@ config ARCH_OMAP730 depends on ARCH_OMAP1 bool "OMAP730 Based System" select CPU_ARM926T - select OMAP_MPU_TIMER select ARCH_OMAP_OTG config ARCH_OMAP850 @@ -23,7 +22,6 @@ config ARCH_OMAP15XX default y bool "OMAP15xx Based System" select CPU_ARM925T - select OMAP_MPU_TIMER config ARCH_OMAP16XX depends on ARCH_OMAP1 diff --git a/trunk/arch/arm/mach-omap1/Makefile b/trunk/arch/arm/mach-omap1/Makefile index ba6009f27677..6ee19504845f 100644 --- a/trunk/arch/arm/mach-omap1/Makefile +++ b/trunk/arch/arm/mach-omap1/Makefile @@ -3,11 +3,12 @@ # # Common support -obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o +obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +obj-$(CONFIG_OMAP_MPU_TIMER) += time.o obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management diff --git a/trunk/arch/arm/mach-omap1/time.c b/trunk/arch/arm/mach-omap1/time.c index f83fc335c613..ed7a61ff916a 100644 --- a/trunk/arch/arm/mach-omap1/time.c +++ b/trunk/arch/arm/mach-omap1/time.c @@ -44,21 +44,16 @@ #include #include #include -#include #include #include #include #include -#include - #include #include #include -#ifdef CONFIG_OMAP_MPU_TIMER - #define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE #define OMAP_MPU_TIMER_OFFSET 0x100 @@ -72,7 +67,7 @@ typedef struct { ((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \ (n)*OMAP_MPU_TIMER_OFFSET)) -static inline unsigned long notrace omap_mpu_timer_read(int nr) +static inline unsigned long omap_mpu_timer_read(int nr) { volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr); return timer->read_tim; @@ -217,32 +212,6 @@ static struct clocksource clocksource_mpu = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static DEFINE_CLOCK_DATA(cd); - -static inline unsigned long long notrace _omap_mpu_sched_clock(void) -{ - u32 cyc = mpu_read(&clocksource_mpu); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -#ifndef CONFIG_OMAP_32K_TIMER -unsigned long long notrace sched_clock(void) -{ - return _omap_mpu_sched_clock(); -} -#else -static unsigned long long notrace omap_mpu_sched_clock(void) -{ - return _omap_mpu_sched_clock(); -} -#endif - -static void notrace mpu_update_sched_clock(void) -{ - u32 cyc = mpu_read(&clocksource_mpu); - update_sched_clock(&cd, cyc, (u32)~0); -} - static void __init omap_init_clocksource(unsigned long rate) { static char err[] __initdata = KERN_ERR @@ -250,13 +219,17 @@ static void __init omap_init_clocksource(unsigned long rate) setup_irq(INT_TIMER2, &omap_mpu_timer2_irq); omap_mpu_timer_start(1, ~0, 1); - init_sched_clock(&cd, mpu_update_sched_clock, 32, rate); if (clocksource_register_hz(&clocksource_mpu, rate)) printk(err, clocksource_mpu.name); } -static void __init omap_mpu_timer_init(void) +/* + * --------------------------------------------------------------------------- + * Timer initialization + * --------------------------------------------------------------------------- + */ +static void __init omap_timer_init(void) { struct clk *ck_ref = clk_get(NULL, "ck_ref"); unsigned long rate; @@ -273,66 +246,6 @@ static void __init omap_mpu_timer_init(void) omap_init_clocksource(rate); } -#else -static inline void omap_mpu_timer_init(void) -{ - pr_err("Bogus timer, should not happen\n"); -} -#endif /* CONFIG_OMAP_MPU_TIMER */ - -#if defined(CONFIG_OMAP_MPU_TIMER) && defined(CONFIG_OMAP_32K_TIMER) -static unsigned long long (*preferred_sched_clock)(void); - -unsigned long long notrace sched_clock(void) -{ - if (!preferred_sched_clock) - return 0; - - return preferred_sched_clock(); -} - -static inline void preferred_sched_clock_init(bool use_32k_sched_clock) -{ - if (use_32k_sched_clock) - preferred_sched_clock = omap_32k_sched_clock; - else - preferred_sched_clock = omap_mpu_sched_clock; -} -#else -static inline void preferred_sched_clock_init(bool use_32k_sched_clcok) -{ -} -#endif - -static inline int omap_32k_timer_usable(void) -{ - int res = false; - - if (cpu_is_omap730() || cpu_is_omap15xx()) - return res; - -#ifdef CONFIG_OMAP_32K_TIMER - res = omap_32k_timer_init(); -#endif - - return res; -} - -/* - * --------------------------------------------------------------------------- - * Timer initialization - * --------------------------------------------------------------------------- - */ -static void __init omap_timer_init(void) -{ - if (omap_32k_timer_usable()) { - preferred_sched_clock_init(1); - } else { - omap_mpu_timer_init(); - preferred_sched_clock_init(0); - } -} - struct sys_timer omap_timer = { .init = omap_timer_init, }; diff --git a/trunk/arch/arm/mach-omap1/timer32k.c b/trunk/arch/arm/mach-omap1/timer32k.c index 13d7b8f145bd..20cfbcc6c60c 100644 --- a/trunk/arch/arm/mach-omap1/timer32k.c +++ b/trunk/arch/arm/mach-omap1/timer32k.c @@ -52,9 +52,10 @@ #include #include #include -#include #include +struct sys_timer omap_timer; + /* * --------------------------------------------------------------------------- * 32KHz OS timer @@ -180,14 +181,14 @@ static __init void omap_init_32k_timer(void) * Timer initialization * --------------------------------------------------------------------------- */ -bool __init omap_32k_timer_init(void) +static void __init omap_timer_init(void) { - omap_init_clocksource_32k(); - #ifdef CONFIG_OMAP_DM_TIMER omap_dm_timer_init(); #endif omap_init_32k_timer(); - - return true; } + +struct sys_timer omap_timer = { + .init = omap_timer_init, +}; diff --git a/trunk/arch/arm/mach-omap2/board-cm-t3517.c b/trunk/arch/arm/mach-omap2/board-cm-t3517.c index 8f9a64d650ee..5b0c77732dfc 100644 --- a/trunk/arch/arm/mach-omap2/board-cm-t3517.c +++ b/trunk/arch/arm/mach-omap2/board-cm-t3517.c @@ -124,9 +124,8 @@ static inline void cm_t3517_init_hecc(void) {} #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) #define RTC_IO_GPIO (153) #define RTC_WR_GPIO (154) -#define RTC_RD_GPIO (53) +#define RTC_RD_GPIO (160) #define RTC_CS_GPIO (163) -#define RTC_CS_EN_GPIO (160) struct v3020_platform_data cm_t3517_v3020_pdata = { .use_gpio = 1, @@ -146,16 +145,6 @@ static struct platform_device cm_t3517_rtc_device = { static void __init cm_t3517_init_rtc(void) { - int err; - - err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en"); - if (err) { - pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err); - return; - } - - gpio_direction_output(RTC_CS_EN_GPIO, 1); - platform_device_register(&cm_t3517_rtc_device); } #else @@ -225,12 +214,12 @@ static struct mtd_partition cm_t3517_nand_partitions[] = { }, { .name = "linux", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */ + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ .size = 32 * NAND_BLOCK_SIZE, }, { .name = "rootfs", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */ + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ .size = MTDPART_SIZ_FULL, }, }; @@ -267,19 +256,11 @@ static void __init cm_t3517_init_irq(void) static struct omap_board_mux board_mux[] __initdata = { /* GPIO186 - Green LED */ OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - /* RTC GPIOs: */ - /* IO - GPIO153 */ + /* RTC GPIOs: IO, WR#, RD#, CS# */ OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - /* WR# - GPIO154 */ OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - /* RD# - GPIO53 */ - OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - /* CS# - GPIO163 */ - OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - /* CS EN - GPIO160 */ OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - + OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), /* HSUSB1 RESET */ OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), /* HSUSB2 RESET */ diff --git a/trunk/arch/arm/mach-omap2/board-devkit8000.c b/trunk/arch/arm/mach-omap2/board-devkit8000.c index e906e05bb41b..00bb1fc5e017 100644 --- a/trunk/arch/arm/mach-omap2/board-devkit8000.c +++ b/trunk/arch/arm/mach-omap2/board-devkit8000.c @@ -275,7 +275,8 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = { .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, - .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13) + .pullups = BIT(1), + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) | BIT(15) | BIT(16) | BIT(17), .setup = devkit8000_twl_gpio_setup, }; diff --git a/trunk/arch/arm/mach-omap2/clock44xx_data.c b/trunk/arch/arm/mach-omap2/clock44xx_data.c index de9ec8ddd2ae..e8cb32fd7f13 100644 --- a/trunk/arch/arm/mach-omap2/clock44xx_data.c +++ b/trunk/arch/arm/mach-omap2/clock44xx_data.c @@ -34,6 +34,7 @@ #include "cm2_44xx.h" #include "cm-regbits-44xx.h" #include "prm44xx.h" +#include "prm44xx.h" #include "prm-regbits-44xx.h" #include "control.h" #include "scrm44xx.h" diff --git a/trunk/arch/arm/mach-omap2/clockdomain.c b/trunk/arch/arm/mach-omap2/clockdomain.c index 58e42f76603f..e20b98636ab4 100644 --- a/trunk/arch/arm/mach-omap2/clockdomain.c +++ b/trunk/arch/arm/mach-omap2/clockdomain.c @@ -423,12 +423,6 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; - if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { - pr_err("clockdomain: %s/%s: %s: not yet implemented\n", - clkdm1->name, clkdm2->name, __func__); - return -EINVAL; - } - if (!clkdm1 || !clkdm2) return -EINVAL; @@ -464,12 +458,6 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; - if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { - pr_err("clockdomain: %s/%s: %s: not yet implemented\n", - clkdm1->name, clkdm2->name, __func__); - return -EINVAL; - } - if (!clkdm1 || !clkdm2) return -EINVAL; @@ -512,12 +500,6 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) if (!clkdm1 || !clkdm2) return -EINVAL; - if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { - pr_err("clockdomain: %s/%s: %s: not yet implemented\n", - clkdm1->name, clkdm2->name, __func__); - return -EINVAL; - } - cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs); if (IS_ERR(cd)) { pr_debug("clockdomain: hardware cannot set/clear wake up of " @@ -545,12 +527,6 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm) struct clkdm_dep *cd; u32 mask = 0; - if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { - pr_err("clockdomain: %s: %s: not yet implemented\n", - clkdm->name, __func__); - return -EINVAL; - } - if (!clkdm) return -EINVAL; @@ -854,7 +830,8 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm) * dependency code and data for OMAP4. */ if (cpu_is_omap44xx()) { - pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name); + WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency " + "support is not yet implemented\n"); } else { if (atomic_read(&clkdm->usecount) > 0) _clkdm_add_autodeps(clkdm); @@ -895,7 +872,8 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm) * dependency code and data for OMAP4. */ if (cpu_is_omap44xx()) { - pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name); + WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency " + "support is not yet implemented\n"); } else { if (atomic_read(&clkdm->usecount) > 0) _clkdm_del_autodeps(clkdm); diff --git a/trunk/arch/arm/mach-omap2/clockdomains44xx_data.c b/trunk/arch/arm/mach-omap2/clockdomains44xx_data.c index 10622c914abc..51920fc7fc52 100644 --- a/trunk/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/trunk/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -30,6 +30,8 @@ #include "cm1_44xx.h" #include "cm2_44xx.h" +#include "cm1_44xx.h" +#include "cm2_44xx.h" #include "cm-regbits-44xx.h" #include "prm44xx.h" #include "prcm44xx.h" diff --git a/trunk/arch/arm/mach-omap2/pm24xx.c b/trunk/arch/arm/mach-omap2/pm24xx.c index 97feb3ab6a69..9e5dc8ed51e9 100644 --- a/trunk/arch/arm/mach-omap2/pm24xx.c +++ b/trunk/arch/arm/mach-omap2/pm24xx.c @@ -134,7 +134,7 @@ static void omap2_enter_full_retention(void) /* Block console output in case it is on one of the OMAP UARTs */ if (!is_suspending()) - if (!console_trylock()) + if (try_acquire_console_sem()) goto no_sleep; omap_uart_prepare_idle(0); @@ -151,7 +151,7 @@ static void omap2_enter_full_retention(void) omap_uart_resume_idle(0); if (!is_suspending()) - console_unlock(); + release_console_sem(); no_sleep: if (omap2_pm_debug) { diff --git a/trunk/arch/arm/mach-omap2/pm34xx.c b/trunk/arch/arm/mach-omap2/pm34xx.c index a4aa1920a75c..8cbbeade4b8a 100644 --- a/trunk/arch/arm/mach-omap2/pm34xx.c +++ b/trunk/arch/arm/mach-omap2/pm34xx.c @@ -398,7 +398,7 @@ void omap_sram_idle(void) if (!is_suspending()) if (per_next_state < PWRDM_POWER_ON || core_next_state < PWRDM_POWER_ON) - if (!console_trylock()) + if (try_acquire_console_sem()) goto console_still_active; /* PER */ @@ -481,7 +481,7 @@ void omap_sram_idle(void) } if (!is_suspending()) - console_unlock(); + release_console_sem(); console_still_active: /* Disable IO-PAD and IO-CHAIN wakeup */ diff --git a/trunk/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/trunk/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c index cf600e22bf8e..d5233890370c 100644 --- a/trunk/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c +++ b/trunk/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c @@ -19,6 +19,7 @@ #include #include "powerdomain.h" +#include "prm-regbits-34xx.h" #include "prm.h" #include "prm-regbits-24xx.h" #include "prm-regbits-34xx.h" diff --git a/trunk/arch/arm/mach-omap2/serial.c b/trunk/arch/arm/mach-omap2/serial.c index 32e91a9c8b6b..302da7403a10 100644 --- a/trunk/arch/arm/mach-omap2/serial.c +++ b/trunk/arch/arm/mach-omap2/serial.c @@ -812,7 +812,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) oh->dev_attr = uart; - console_lock(); /* in case the earlycon is on the UART */ + acquire_console_sem(); /* in case the earlycon is on the UART */ /* * Because of early UART probing, UART did not get idled @@ -838,7 +838,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) omap_uart_block_sleep(uart); uart->timeout = DEFAULT_TIMEOUT; - console_unlock(); + release_console_sem(); if ((cpu_is_omap34xx() && uart->padconf) || (uart->wk_en && uart->wk_mask)) { diff --git a/trunk/arch/arm/mach-omap2/timer-gp.c b/trunk/arch/arm/mach-omap2/timer-gp.c index 7b7c2683ae7b..4e48e786bec7 100644 --- a/trunk/arch/arm/mach-omap2/timer-gp.c +++ b/trunk/arch/arm/mach-omap2/timer-gp.c @@ -42,8 +42,6 @@ #include "timer-gp.h" -#include - /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ #define MAX_GPTIMER_ID 12 @@ -178,14 +176,10 @@ static void __init omap2_gp_clockevent_init(void) /* * When 32k-timer is enabled, don't use GPTimer for clocksource * instead, just leave default clocksource which uses the 32k - * sync counter. See clocksource setup in plat-omap/counter_32k.c + * sync counter. See clocksource setup in see plat-omap/common.c. */ -static void __init omap2_gp_clocksource_init(void) -{ - omap_init_clocksource_32k(); -} - +static inline void __init omap2_gp_clocksource_init(void) {} #else /* * clocksource diff --git a/trunk/arch/arm/mach-realview/Kconfig b/trunk/arch/arm/mach-realview/Kconfig index 7ca138a943a9..b4575ae9648e 100644 --- a/trunk/arch/arm/mach-realview/Kconfig +++ b/trunk/arch/arm/mach-realview/Kconfig @@ -2,56 +2,52 @@ menu "RealView platform type" depends on ARCH_REALVIEW config MACH_REALVIEW_EB - bool "Support RealView(R) Emulation Baseboard" + bool "Support RealView/EB platform" select ARM_GIC help - Include support for the ARM(R) RealView(R) Emulation Baseboard - platform. + Include support for the ARM(R) RealView Emulation Baseboard platform. config REALVIEW_EB_A9MP - bool "Support Multicore Cortex-A9 Tile" + bool "Support Multicore Cortex-A9" depends on MACH_REALVIEW_EB select CPU_V7 help - Enable support for the Cortex-A9MPCore tile fitted to the - Realview(R) Emulation Baseboard platform. + Enable support for the Cortex-A9MPCore tile on the Realview platform. config REALVIEW_EB_ARM11MP - bool "Support ARM11MPCore Tile" + bool "Support ARM11MPCore tile" depends on MACH_REALVIEW_EB select CPU_V6 select ARCH_HAS_BARRIERS if SMP help - Enable support for the ARM11MPCore tile fitted to the Realview(R) - Emulation Baseboard platform. + Enable support for the ARM11MPCore tile on the Realview platform. config REALVIEW_EB_ARM11MP_REVB - bool "Support ARM11MPCore RevB Tile" + bool "Support ARM11MPCore RevB tile" depends on REALVIEW_EB_ARM11MP help - Enable support for the ARM11MPCore Revision B tile on the - Realview(R) Emulation Baseboard platform. Since there are device - address differences, a kernel built with this option enabled is - not compatible with other revisions of the ARM11MPCore tile. + Enable support for the ARM11MPCore RevB tile on the Realview + platform. Since there are device address differences, a + kernel built with this option enabled is not compatible with + other revisions of the ARM11MPCore tile. config MACH_REALVIEW_PB11MP - bool "Support RealView(R) Platform Baseboard for ARM11MPCore" + bool "Support RealView/PB11MPCore platform" select CPU_V6 select ARM_GIC select HAVE_PATA_PLATFORM select ARCH_HAS_BARRIERS if SMP help - Include support for the ARM(R) RealView(R) Platform Baseboard for - the ARM11MPCore. This platform has an on-board ARM11MPCore and has + Include support for the ARM(R) RealView MPCore Platform Baseboard. + PB11MPCore is a platform with an on-board ARM11MPCore and has support for PCI-E and Compact Flash. config MACH_REALVIEW_PB1176 - bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" + bool "Support RealView/PB1176 platform" select CPU_V6 select ARM_GIC help - Include support for the ARM(R) RealView(R) Platform Baseboard for - ARM1176JZF-S. + Include support for the ARM(R) RealView ARM1176 Platform Baseboard. config REALVIEW_PB1176_SECURE_FLASH bool "Allow access to the secure flash memory block" @@ -63,24 +59,23 @@ config REALVIEW_PB1176_SECURE_FLASH block (64MB @ 0x3c000000) is required. config MACH_REALVIEW_PBA8 - bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform" + bool "Support RealView/PB-A8 platform" select CPU_V7 select ARM_GIC select HAVE_PATA_PLATFORM help - Include support for the ARM(R) RealView Platform Baseboard for - Cortex(tm)-A8. This platform has an on-board Cortex-A8 and has - support for PCI-E and Compact Flash. + Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard. + PB-A8 is a platform with an on-board Cortex-A8 and has support for + PCI-E and Compact Flash. config MACH_REALVIEW_PBX - bool "Support RealView(R) Platform Baseboard Explore" + bool "Support RealView/PBX platform" select ARM_GIC select HAVE_PATA_PLATFORM select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET select ZONE_DMA if SPARSEMEM help - Include support for the ARM(R) RealView(R) Platform Baseboard - Explore. + Include support for the ARM(R) RealView PBX platform. config REALVIEW_HIGH_PHYS_OFFSET bool "High physical base address for the RealView platform" diff --git a/trunk/arch/arm/mach-realview/platsmp.c b/trunk/arch/arm/mach-realview/platsmp.c index 6959d13d908a..a22bf67f2f78 100644 --- a/trunk/arch/arm/mach-realview/platsmp.c +++ b/trunk/arch/arm/mach-realview/platsmp.c @@ -41,7 +41,7 @@ volatile int __cpuinitdata pen_release = -1; * observers, irrespective of whether they're taking part in coherency * or not. This is necessary for the hotplug code to work reliably. */ -static void __cpuinit write_pen_release(int val) +static void write_pen_release(int val) { pen_release = val; smp_wmb(); diff --git a/trunk/arch/arm/mach-shmobile/Kconfig b/trunk/arch/arm/mach-shmobile/Kconfig index 0c8f6cf3e948..4d1b4c5c9389 100644 --- a/trunk/arch/arm/mach-shmobile/Kconfig +++ b/trunk/arch/arm/mach-shmobile/Kconfig @@ -60,8 +60,6 @@ endchoice config MACH_AG5EVM bool "AG5EVM board" - select ARCH_REQUIRE_GPIOLIB - select SH_LCD_MIPI_DSI depends on ARCH_SH73A0 config MACH_MACKEREL diff --git a/trunk/arch/arm/mach-shmobile/board-ag5evm.c b/trunk/arch/arm/mach-shmobile/board-ag5evm.c index 2123b96b5638..c18a740a4159 100644 --- a/trunk/arch/arm/mach-shmobile/board-ag5evm.c +++ b/trunk/arch/arm/mach-shmobile/board-ag5evm.c @@ -34,10 +34,9 @@ #include #include #include -#include -#include