Skip to content
Permalink
master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

raspytime/README.md

Go to file
 
 
Cannot retrieve contributors at this time
Installation Arbeitsrechner Raspberry Pi
42 lines (34 sloc) 1.23 KB
Raw Blame
Open in GitHub Desktop

Installation

Arbeitsrechner

  1. get raspbian lite: -> official site
  2. dump image to sdcard (via dd or other known methods)
  3. customize BOOT partition (optional, but recommended):
    • activate SSH: generate an empty file named ssh
    • assign an IP Adress for the first start:
      extend file cmdline.txt:
      ip=141.14.128.34::141.14.128.128:255.255.255.0:timet06:eth0:off
      schematic:
      IP:remote-boot-server:gateway:netmask:hostname:iface:autoconfig

Raspberry Pi

  1. setup network as usual in /etc/network/interfaces

    # static network configuration

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
address 141.14.128.34
gateway 141.14.128.128
netmask 255.255.240.0
dns-nameservers 141.14.128.1
dns-search rz-berlin.mpg.de fhi-berlin.mpg.de

  2. setup hostname (/etc/hostname)

  3. cleanup /boot/cmdline.txt (remove first-start network settings)

  4. install git: sudo apt update && sudo apt install git

  5. clone github repository: git clone https://github.molgen.mpg.de/kw/raspytime

  6. run cd raspytime && sudo ./installscript.sh