diff --git a/libXScrnSaver-1.2.2-0.bee b/libXScrnSaver-1.2.2-0.bee
deleted file mode 100755
index 5e0bd539a..000000000
--- a/libXScrnSaver-1.2.2-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXScrnSaver-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/libXcomposite-0.4.4-0.bee b/libXcomposite-0.4.4-0.bee
deleted file mode 100755
index 2d1b94d1b..000000000
--- a/libXcomposite-0.4.4-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXcomposite-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/libXdamage-1.1.4-0.bee b/libXdamage-1.1.4-0.bee
deleted file mode 100755
index 04f1dff4a..000000000
--- a/libXdamage-1.1.4-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXdamage-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/libXext-1.3.2-0.bee b/libXext-1.3.2-0.bee
deleted file mode 100755
index b70aba430..000000000
--- a/libXext-1.3.2-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXext-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/libXi-1.7.2-0.bee b/libXi-1.7.2-0.bee
deleted file mode 100755
index d5409a472..000000000
--- a/libXi-1.7.2-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXi-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/libXinerama-1.1.3-0.bee b/libXinerama-1.1.3-0.bee
deleted file mode 100755
index 05fa38ea4..000000000
--- a/libXinerama-1.1.3-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXinerama-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/libXrender-0.9.8-0.bee b/libXrender-0.9.8-0.bee
deleted file mode 100755
index 5aeb248e0..000000000
--- a/libXrender-0.9.8-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXrender-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/libXv-1.0.10-0.bee b/libXv-1.0.10-0.bee
deleted file mode 100755
index a4a74ba21..000000000
--- a/libXv-1.0.10-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXv-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/libXvMC-1.0.8-0.bee b/libXvMC-1.0.8-0.bee
deleted file mode 100755
index 03b9951e2..000000000
--- a/libXvMC-1.0.8-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXvMC-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/libXxf86vm-1.1.3-0.bee b/libXxf86vm-1.1.3-0.bee
deleted file mode 100755
index b92f751ae..000000000
--- a/libXxf86vm-1.1.3-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXxf86vm-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/libdmx-1.1.3-0.bee b/libdmx-1.1.3-0.bee
deleted file mode 100755
index e8efd1f2a..000000000
--- a/libdmx-1.1.3-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libdmx-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/libxkbfile-1.0.8-0.bee b/libxkbfile-1.0.8-0.bee
deleted file mode 100755
index 892a3239e..000000000
--- a/libxkbfile-1.0.8-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libxkbfile-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##