From 59177700a4ce7c926d612320a59d7154c942ea04 Mon Sep 17 00:00:00 2001 From: Paul Menzel Date: Thu, 27 Sep 2018 17:11:01 +0200 Subject: [PATCH] Remove X protocol packages replace by xorgproto --- bigreqsproto-1.1.2-0.bee | 83 ----------------------------------- compositeproto-0.4.2-0.bee | 83 ----------------------------------- damageproto-1.2.1-0.bee | 83 ----------------------------------- dmxproto-2.3.1-0.bee | 83 ----------------------------------- dri2proto-2.8-0.bee | 83 ----------------------------------- dri3proto-1.0-0.bee | 83 ----------------------------------- fixesproto-5.0-0.bee | 83 ----------------------------------- fontsproto-2.1.3-0.bee | 83 ----------------------------------- glproto-1.4.17-1.bee | 83 ----------------------------------- inputproto-2.3-0.bee | 83 ----------------------------------- kbproto-1.0.6-0.bee | 83 ----------------------------------- presentproto.be0 | 85 ------------------------------------ printproto-1.0.4-0.bee | 30 ------------- randrproto-1.5.0-0.bee | 83 ----------------------------------- recordproto-1.14.2-0.bee | 83 ----------------------------------- renderproto-0.11.1-0.bee | 83 ----------------------------------- resourceproto-1.2.0-0.bee | 83 ----------------------------------- scrnsaverproto-1.2.2-0.bee | 83 ----------------------------------- videoproto-2.3.2-0.bee | 83 ----------------------------------- xcmiscproto-1.2.2-0.bee | 83 ----------------------------------- xextproto-7.3.0-0.bee | 83 ----------------------------------- xf86bigfontproto-1.2.0-1.bee | 83 ----------------------------------- xf86dgaproto-2.1-1.bee | 83 ----------------------------------- xf86driproto-2.1.1-0.bee | 83 ----------------------------------- xf86vidmodeproto-2.3-1.bee | 83 ----------------------------------- xineramaproto-1.2.1-0.bee | 83 ----------------------------------- xproto.be0 | 85 ------------------------------------ 27 files changed, 2192 deletions(-) delete mode 100755 bigreqsproto-1.1.2-0.bee delete mode 100755 compositeproto-0.4.2-0.bee delete mode 100755 damageproto-1.2.1-0.bee delete mode 100755 dmxproto-2.3.1-0.bee delete mode 100755 dri2proto-2.8-0.bee delete mode 100755 dri3proto-1.0-0.bee delete mode 100755 fixesproto-5.0-0.bee delete mode 100755 fontsproto-2.1.3-0.bee delete mode 100755 glproto-1.4.17-1.bee delete mode 100755 inputproto-2.3-0.bee delete mode 100755 kbproto-1.0.6-0.bee delete mode 100755 presentproto.be0 delete mode 100755 printproto-1.0.4-0.bee delete mode 100755 randrproto-1.5.0-0.bee delete mode 100755 recordproto-1.14.2-0.bee delete mode 100755 renderproto-0.11.1-0.bee delete mode 100755 resourceproto-1.2.0-0.bee delete mode 100755 scrnsaverproto-1.2.2-0.bee delete mode 100755 videoproto-2.3.2-0.bee delete mode 100755 xcmiscproto-1.2.2-0.bee delete mode 100755 xextproto-7.3.0-0.bee delete mode 100755 xf86bigfontproto-1.2.0-1.bee delete mode 100755 xf86dgaproto-2.1-1.bee delete mode 100755 xf86driproto-2.1.1-0.bee delete mode 100755 xf86vidmodeproto-2.3-1.bee delete mode 100755 xineramaproto-1.2.1-0.bee delete mode 100755 xproto.be0 diff --git a/bigreqsproto-1.1.2-0.bee b/bigreqsproto-1.1.2-0.bee deleted file mode 100755 index 0556cce26..000000000 --- a/bigreqsproto-1.1.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/bigreqsproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/compositeproto-0.4.2-0.bee b/compositeproto-0.4.2-0.bee deleted file mode 100755 index b7f507cbf..000000000 --- a/compositeproto-0.4.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/compositeproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/damageproto-1.2.1-0.bee b/damageproto-1.2.1-0.bee deleted file mode 100755 index 63202b2f6..000000000 --- a/damageproto-1.2.1-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/damageproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/dmxproto-2.3.1-0.bee b/dmxproto-2.3.1-0.bee deleted file mode 100755 index 896f9506a..000000000 --- a/dmxproto-2.3.1-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/dmxproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/dri2proto-2.8-0.bee b/dri2proto-2.8-0.bee deleted file mode 100755 index ee2fd6e45..000000000 --- a/dri2proto-2.8-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/dri2proto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/dri3proto-1.0-0.bee b/dri3proto-1.0-0.bee deleted file mode 100755 index 27ef05719..000000000 --- a/dri3proto-1.0-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/dri3proto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/fixesproto-5.0-0.bee b/fixesproto-5.0-0.bee deleted file mode 100755 index 62038fdd6..000000000 --- a/fixesproto-5.0-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/fixesproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/fontsproto-2.1.3-0.bee b/fontsproto-2.1.3-0.bee deleted file mode 100755 index 2cb8d23d8..000000000 --- a/fontsproto-2.1.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/fontsproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/glproto-1.4.17-1.bee b/glproto-1.4.17-1.bee deleted file mode 100755 index d1a8a17ef..000000000 --- a/glproto-1.4.17-1.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/glproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/inputproto-2.3-0.bee b/inputproto-2.3-0.bee deleted file mode 100755 index 12327a468..000000000 --- a/inputproto-2.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/inputproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/kbproto-1.0.6-0.bee b/kbproto-1.0.6-0.bee deleted file mode 100755 index 1e19a4ec1..000000000 --- a/kbproto-1.0.6-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/kbproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/presentproto.be0 b/presentproto.be0 deleted file mode 100755 index a6f090e11..000000000 --- a/presentproto.be0 +++ /dev/null @@ -1,85 +0,0 @@ -#!/usr/bin/env beesh - -# BEE_VERSION presentproto-1.1-0 - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/presentproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/printproto-1.0.4-0.bee b/printproto-1.0.4-0.bee deleted file mode 100755 index cdc94d261..000000000 --- a/printproto-1.0.4-0.bee +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/env beesh - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/printproto-${PKGVERSION}.tar.bz2" - -PATCHURL[0]="" - -PGRP=( uncategorized ) - - - -# BEE_CONFIGURE=compat - -# EXCLUDE="" - -mee_patch() { - bee_patch -} - -mee_configure() { - bee_configure -} - -mee_build() { - bee_build -} - -mee_install() { - bee_install -} - diff --git a/randrproto-1.5.0-0.bee b/randrproto-1.5.0-0.bee deleted file mode 100755 index caa4af410..000000000 --- a/randrproto-1.5.0-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/randrproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/recordproto-1.14.2-0.bee b/recordproto-1.14.2-0.bee deleted file mode 100755 index a416e753d..000000000 --- a/recordproto-1.14.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/recordproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/renderproto-0.11.1-0.bee b/renderproto-0.11.1-0.bee deleted file mode 100755 index c00158806..000000000 --- a/renderproto-0.11.1-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/renderproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/resourceproto-1.2.0-0.bee b/resourceproto-1.2.0-0.bee deleted file mode 100755 index 08da87d7a..000000000 --- a/resourceproto-1.2.0-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/resourceproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/scrnsaverproto-1.2.2-0.bee b/scrnsaverproto-1.2.2-0.bee deleted file mode 100755 index a0fd924d4..000000000 --- a/scrnsaverproto-1.2.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/scrnsaverproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/videoproto-2.3.2-0.bee b/videoproto-2.3.2-0.bee deleted file mode 100755 index 3c5dba0ba..000000000 --- a/videoproto-2.3.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/videoproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xcmiscproto-1.2.2-0.bee b/xcmiscproto-1.2.2-0.bee deleted file mode 100755 index 00ecdb127..000000000 --- a/xcmiscproto-1.2.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xcmiscproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xextproto-7.3.0-0.bee b/xextproto-7.3.0-0.bee deleted file mode 100755 index cfd7aef46..000000000 --- a/xextproto-7.3.0-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xextproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xf86bigfontproto-1.2.0-1.bee b/xf86bigfontproto-1.2.0-1.bee deleted file mode 100755 index 7d6311a0e..000000000 --- a/xf86bigfontproto-1.2.0-1.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xf86bigfontproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xf86dgaproto-2.1-1.bee b/xf86dgaproto-2.1-1.bee deleted file mode 100755 index cb0dee0b3..000000000 --- a/xf86dgaproto-2.1-1.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xf86dgaproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xf86driproto-2.1.1-0.bee b/xf86driproto-2.1.1-0.bee deleted file mode 100755 index 95ce8acf7..000000000 --- a/xf86driproto-2.1.1-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xf86driproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xf86vidmodeproto-2.3-1.bee b/xf86vidmodeproto-2.3-1.bee deleted file mode 100755 index 08b86072b..000000000 --- a/xf86vidmodeproto-2.3-1.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xf86vidmodeproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xineramaproto-1.2.1-0.bee b/xineramaproto-1.2.1-0.bee deleted file mode 100755 index 517402db0..000000000 --- a/xineramaproto-1.2.1-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xineramaproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xproto.be0 b/xproto.be0 deleted file mode 100755 index 68d9869ed..000000000 --- a/xproto.be0 +++ /dev/null @@ -1,85 +0,0 @@ -#!/usr/bin/env beesh - -# BEE_VERSION xproto-7.0.31-0 - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="https://www.x.org/releases/individual/proto/xproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -##