diff --git a/dri3proto-1.0-0.bee b/dri3proto-1.0-0.bee
deleted file mode 100755
index 27ef05719..000000000
--- a/dri3proto-1.0-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/dri3proto-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/fontsproto-2.1.3-0.bee b/fontsproto-2.1.3-0.bee
deleted file mode 100755
index 2cb8d23d8..000000000
--- a/fontsproto-2.1.3-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/fontsproto-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/glproto-1.4.17-1.bee b/glproto-1.4.17-1.bee
deleted file mode 100755
index d1a8a17ef..000000000
--- a/glproto-1.4.17-1.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/glproto-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/inputproto-2.3-0.bee b/inputproto-2.3-0.bee
deleted file mode 100755
index 12327a468..000000000
--- a/inputproto-2.3-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/inputproto-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/kbproto-1.0.6-0.bee b/kbproto-1.0.6-0.bee
deleted file mode 100755
index 1e19a4ec1..000000000
--- a/kbproto-1.0.6-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/kbproto-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/presentproto.be0 b/presentproto.be0
deleted file mode 100755
index a6f090e11..000000000
--- a/presentproto.be0
+++ /dev/null
@@ -1,85 +0,0 @@
-#!/usr/bin/env beesh
-
-# BEE_VERSION presentproto-1.1-0
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/presentproto-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/renderproto-0.11.1-0.bee b/renderproto-0.11.1-0.bee
deleted file mode 100755
index c00158806..000000000
--- a/renderproto-0.11.1-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/renderproto-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/videoproto-2.3.2-0.bee b/videoproto-2.3.2-0.bee
deleted file mode 100755
index 3c5dba0ba..000000000
--- a/videoproto-2.3.2-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/videoproto-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/xf86driproto-2.1.1-0.bee b/xf86driproto-2.1.1-0.bee
deleted file mode 100755
index 95ce8acf7..000000000
--- a/xf86driproto-2.1.1-0.bee
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/usr/bin/env beesh
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xf86driproto-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/xproto.be0 b/xproto.be0
deleted file mode 100755
index 68d9869ed..000000000
--- a/xproto.be0
+++ /dev/null
@@ -1,85 +0,0 @@
-#!/usr/bin/env beesh
-
-# BEE_VERSION xproto-7.0.31-0
-
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="https://www.x.org/releases/individual/proto/xproto-${PKGVERSION}.tar.bz2"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
-
-# PATCHURL+=()
-
-###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
-## directory.
-
-# build_in_sourcedir
-
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
-# sourcesubdir_append src
-
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
-## by default this may be 'make install DESTDIR="${D}"'
-
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0]="" is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##