From 95adc1f270d959e8e1c21c1830af407cd374a6a5 Mon Sep 17 00:00:00 2001 From: Paul Menzel Date: Thu, 30 Mar 2017 18:00:12 +0200 Subject: [PATCH] X: Remove unneeded legacy fonts > Xorg's ancestor (X11R1, in 1987) at first only provided bitmap fonts, > with a tool (bdftopcf) to assist in their installation. With the > introduction of xorg-server-1.19.0 and libXfont2 many people will not > need them. There are still a few old packages which might require, or > benefit from, these deprecated fonts and so the following packages are > shown here. > > ### Note ### > > The font-adobe-100dpi package installs 100 dots per inch versions of > Courier, Helvetica, New Century Schoolbook and Times fonts. > > The remaining font packages here provide 75dpi versions of those fonts, > and various miscellaneous fonts - mostly for legacy encodings. Those are > primarily to silence warnings when testing Xorg. In previous versions of > BLFS a lot more legacy fonts were installed. > > Please consult the BLFS-7.10 book at > http://www.linuxfromscratch.org/blfs/view/7.10/x/x7font.html if you wish > to install any of those other fonts. Compare the fonts [1][2], and only install the fonts listed in BLFS 8.0. [1] http://www.linuxfromscratch.org/blfs/view/7.10/x/x7font.html [2] http://www.linuxfromscratch.org/blfs/view/8.0/x/x7font.html --- font-adobe-utopia-100dpi-1.0.4-0.bee | 83 --------------------- font-adobe-utopia-75dpi-1.0.4-0.bee | 83 --------------------- font-arabic-misc-1.0.3-0.bee | 83 --------------------- font-bh-100dpi-1.0.3-0.bee | 83 --------------------- font-bh-75dpi-1.0.3-0.bee | 83 --------------------- font-bh-lucidatypewriter-100dpi-1.0.3-0.bee | 83 --------------------- font-bh-lucidatypewriter-75dpi-1.0.3-0.bee | 83 --------------------- font-bitstream-100dpi-1.0.3-0.bee | 83 --------------------- font-bitstream-75dpi-1.0.3-0.bee | 83 --------------------- font-bitstream-type1-1.0.3-0.bee | 83 --------------------- font-cronyx-cyrillic-1.0.3-0.bee | 83 --------------------- font-cursor-misc-1.0.3-0.bee | 83 --------------------- font-dec-misc-1.0.3-0.bee | 83 --------------------- font-micro-misc-1.0.3-0.bee | 83 --------------------- font-misc-cyrillic-1.0.3-0.bee | 83 --------------------- font-misc-meltho-1.0.3-0.bee | 83 --------------------- font-misc-misc-1.1.2-0.bee | 83 --------------------- font-mutt-misc-1.0.3-0.bee | 83 --------------------- font-schumacher-misc-1.1.2-0.bee | 83 --------------------- font-screen-cyrillic-1.0.4-0.bee | 83 --------------------- font-sony-misc-1.0.3-0.bee | 83 --------------------- font-sun-misc-1.0.3-0.bee | 83 --------------------- font-symbola.be0 | 38 ---------- font-winitzki-cyrillic-1.0.3-0.bee | 83 --------------------- font-wqy-zenhei-0.be0 | 43 ----------- 25 files changed, 1990 deletions(-) delete mode 100755 font-adobe-utopia-100dpi-1.0.4-0.bee delete mode 100755 font-adobe-utopia-75dpi-1.0.4-0.bee delete mode 100755 font-arabic-misc-1.0.3-0.bee delete mode 100755 font-bh-100dpi-1.0.3-0.bee delete mode 100755 font-bh-75dpi-1.0.3-0.bee delete mode 100755 font-bh-lucidatypewriter-100dpi-1.0.3-0.bee delete mode 100755 font-bh-lucidatypewriter-75dpi-1.0.3-0.bee delete mode 100755 font-bitstream-100dpi-1.0.3-0.bee delete mode 100755 font-bitstream-75dpi-1.0.3-0.bee delete mode 100755 font-bitstream-type1-1.0.3-0.bee delete mode 100755 font-cronyx-cyrillic-1.0.3-0.bee delete mode 100755 font-cursor-misc-1.0.3-0.bee delete mode 100755 font-dec-misc-1.0.3-0.bee delete mode 100755 font-micro-misc-1.0.3-0.bee delete mode 100755 font-misc-cyrillic-1.0.3-0.bee delete mode 100755 font-misc-meltho-1.0.3-0.bee delete mode 100755 font-misc-misc-1.1.2-0.bee delete mode 100755 font-mutt-misc-1.0.3-0.bee delete mode 100755 font-schumacher-misc-1.1.2-0.bee delete mode 100755 font-screen-cyrillic-1.0.4-0.bee delete mode 100755 font-sony-misc-1.0.3-0.bee delete mode 100755 font-sun-misc-1.0.3-0.bee delete mode 100755 font-symbola.be0 delete mode 100755 font-winitzki-cyrillic-1.0.3-0.bee delete mode 100755 font-wqy-zenhei-0.be0 diff --git a/font-adobe-utopia-100dpi-1.0.4-0.bee b/font-adobe-utopia-100dpi-1.0.4-0.bee deleted file mode 100755 index 5aa4ea9a9..000000000 --- a/font-adobe-utopia-100dpi-1.0.4-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-adobe-utopia-100dpi-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-adobe-utopia-75dpi-1.0.4-0.bee b/font-adobe-utopia-75dpi-1.0.4-0.bee deleted file mode 100755 index b0578aedd..000000000 --- a/font-adobe-utopia-75dpi-1.0.4-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-adobe-utopia-75dpi-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-arabic-misc-1.0.3-0.bee b/font-arabic-misc-1.0.3-0.bee deleted file mode 100755 index 3325a5ae7..000000000 --- a/font-arabic-misc-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-arabic-misc-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-bh-100dpi-1.0.3-0.bee b/font-bh-100dpi-1.0.3-0.bee deleted file mode 100755 index 7037586a2..000000000 --- a/font-bh-100dpi-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-bh-100dpi-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-bh-75dpi-1.0.3-0.bee b/font-bh-75dpi-1.0.3-0.bee deleted file mode 100755 index 1a1c1516c..000000000 --- a/font-bh-75dpi-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-bh-75dpi-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-bh-lucidatypewriter-100dpi-1.0.3-0.bee b/font-bh-lucidatypewriter-100dpi-1.0.3-0.bee deleted file mode 100755 index 132a586f0..000000000 --- a/font-bh-lucidatypewriter-100dpi-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-bh-lucidatypewriter-100dpi-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-bh-lucidatypewriter-75dpi-1.0.3-0.bee b/font-bh-lucidatypewriter-75dpi-1.0.3-0.bee deleted file mode 100755 index d8b02053c..000000000 --- a/font-bh-lucidatypewriter-75dpi-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-bh-lucidatypewriter-75dpi-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-bitstream-100dpi-1.0.3-0.bee b/font-bitstream-100dpi-1.0.3-0.bee deleted file mode 100755 index 89285380a..000000000 --- a/font-bitstream-100dpi-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-bitstream-100dpi-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-bitstream-75dpi-1.0.3-0.bee b/font-bitstream-75dpi-1.0.3-0.bee deleted file mode 100755 index 6fcb845a8..000000000 --- a/font-bitstream-75dpi-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-bitstream-75dpi-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-bitstream-type1-1.0.3-0.bee b/font-bitstream-type1-1.0.3-0.bee deleted file mode 100755 index 55cc0d3b5..000000000 --- a/font-bitstream-type1-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-bitstream-type1-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-cronyx-cyrillic-1.0.3-0.bee b/font-cronyx-cyrillic-1.0.3-0.bee deleted file mode 100755 index afde434f6..000000000 --- a/font-cronyx-cyrillic-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-cronyx-cyrillic-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-cursor-misc-1.0.3-0.bee b/font-cursor-misc-1.0.3-0.bee deleted file mode 100755 index 25638e2d2..000000000 --- a/font-cursor-misc-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-cursor-misc-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-dec-misc-1.0.3-0.bee b/font-dec-misc-1.0.3-0.bee deleted file mode 100755 index 51ef83a04..000000000 --- a/font-dec-misc-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-dec-misc-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-micro-misc-1.0.3-0.bee b/font-micro-misc-1.0.3-0.bee deleted file mode 100755 index 0ff43801f..000000000 --- a/font-micro-misc-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-micro-misc-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-misc-cyrillic-1.0.3-0.bee b/font-misc-cyrillic-1.0.3-0.bee deleted file mode 100755 index 573020891..000000000 --- a/font-misc-cyrillic-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-misc-cyrillic-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-misc-meltho-1.0.3-0.bee b/font-misc-meltho-1.0.3-0.bee deleted file mode 100755 index fa74d5152..000000000 --- a/font-misc-meltho-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-misc-meltho-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-misc-misc-1.1.2-0.bee b/font-misc-misc-1.1.2-0.bee deleted file mode 100755 index 841fff631..000000000 --- a/font-misc-misc-1.1.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-misc-misc-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-mutt-misc-1.0.3-0.bee b/font-mutt-misc-1.0.3-0.bee deleted file mode 100755 index 338c85de1..000000000 --- a/font-mutt-misc-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-mutt-misc-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-schumacher-misc-1.1.2-0.bee b/font-schumacher-misc-1.1.2-0.bee deleted file mode 100755 index 04df00a2a..000000000 --- a/font-schumacher-misc-1.1.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-schumacher-misc-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-screen-cyrillic-1.0.4-0.bee b/font-screen-cyrillic-1.0.4-0.bee deleted file mode 100755 index 1f23a11fb..000000000 --- a/font-screen-cyrillic-1.0.4-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-screen-cyrillic-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-sony-misc-1.0.3-0.bee b/font-sony-misc-1.0.3-0.bee deleted file mode 100755 index 1bc57513a..000000000 --- a/font-sony-misc-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-sony-misc-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-sun-misc-1.0.3-0.bee b/font-sun-misc-1.0.3-0.bee deleted file mode 100755 index 4640e5298..000000000 --- a/font-sun-misc-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-sun-misc-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-symbola.be0 b/font-symbola.be0 deleted file mode 100755 index 30d91ff93..000000000 --- a/font-symbola.be0 +++ /dev/null @@ -1,38 +0,0 @@ -#!/usr/bin/env beesh - -# BEE_VERSION font-symbola-9.00-0 - -SRCURL[0]="http://users.teilar.gr/~g1951d/Symbola.zip" - -# PATCHURL+=() - -# EXCLUDE+=() - -# build_in_sourcedir - -# sourcesubdir_append src - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} - -mee_install_post() { - install -d --mode=755 ${D}${DATAROOTDIR}/fonts/Symbola - cp -av ${S}/*.ttf ${D}${DATAROOTDIR}/fonts/Symbola/ -} diff --git a/font-winitzki-cyrillic-1.0.3-0.bee b/font-winitzki-cyrillic-1.0.3-0.bee deleted file mode 100755 index b3f48cab1..000000000 --- a/font-winitzki-cyrillic-1.0.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/font/font-winitzki-cyrillic-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/font-wqy-zenhei-0.be0 b/font-wqy-zenhei-0.be0 deleted file mode 100755 index 95f812237..000000000 --- a/font-wqy-zenhei-0.be0 +++ /dev/null @@ -1,43 +0,0 @@ -#!/usr/bin/env beesh - -# BEE_VERSION font-wqy-zenhei-0.9.45-0 - -SRCURL[0]="http://http.debian.net/debian/pool/main/f/fonts-wqy-zenhei/fonts-wqy-zenhei_${PKGVERSION}.orig.tar.gz" - -# PATCHURL+=() - -# EXCLUDE+=() - -# build_in_sourcedir - -# sourcesubdir_append src - -#mee_extract() { -# bee_extract "${@}" -#} - -mee_extract_post() { - rm ${S}/Makefile -} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -mee_install() { - install -d -v --mode=755 ${D}/usr/share/fonts/wenquanyi - install -d -v --mode=755 ${D}/usr/share/fonts/wenquanyi/wqy-zenhei - cp -av ${S}/wqy-zenhei.ttc ${D}/usr/share/fonts/wenquanyi/wqy-zenhei - mkdir -pv ${D}/usr/share/fontconfig/conf.avail - sed '9,10d' ${S}/44-wqy-zenhei.conf > ${D}/usr/share/fontconfig/conf.avail/65-wqy-zenhei.conf - mkdir -p ${D}/etc/fonts/conf.d - ln -s ${D}/usr/share/fontconfig/conf.avail/65-wqy-zenhei.conf ${D}/etc/fonts/conf.d -}