diff --git a/libXScrnSaver-1.2.2-0.bee b/libXScrnSaver-1.2.2-0.bee deleted file mode 100755 index 5e0bd539a..000000000 --- a/libXScrnSaver-1.2.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXScrnSaver-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/libXScrnSaver.be0 b/libXScrnSaver.be0 new file mode 100755 index 000000000..0629995f0 --- /dev/null +++ b/libXScrnSaver.be0 @@ -0,0 +1,32 @@ +#!/bin/env beesh + +# BEE_VERSION libXScrnSaver-1.2.4-0 + +#SRCURL[0]="https://www.x.org/releases/individual/lib/libXScrnSaver-${PKGVERSION}.tar.xz" +SRCURL[0]="https://beehive.molgen.mpg.de/e613751d38e13aa0d0fd8e0149cec057/libXScrnSaver-1.2.4.tar.xz" + +# PATCHURL+=() + +# build_in_sourcedir + +# sourcesubdir_append src + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} diff --git a/libXcomposite-0.4.4-0.bee b/libXcomposite-0.4.4-0.bee deleted file mode 100755 index 2d1b94d1b..000000000 --- a/libXcomposite-0.4.4-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXcomposite-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/libXcomposite.be0 b/libXcomposite.be0 new file mode 100755 index 000000000..0a6faae61 --- /dev/null +++ b/libXcomposite.be0 @@ -0,0 +1,32 @@ +#!/bin/env beesh + +# BEE_VERSION libXcomposite-0.4.6-0 + +#SRCURL[0]="https://www.x.org/releases/individual/lib/libXcomposite-${PKGVERSION}.tar.xz" +SRCURL[0]="https://beehive.molgen.mpg.de/af0a5f0abb5b55f8411cd738cf0e5259/libXcomposite-0.4.6.tar.xz" + +# PATCHURL+=() + +# build_in_sourcedir + +# sourcesubdir_append src + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} diff --git a/libXdamage-1.1.4-0.bee b/libXdamage-1.1.4-0.bee deleted file mode 100755 index 04f1dff4a..000000000 --- a/libXdamage-1.1.4-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXdamage-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/libXdamage.be0 b/libXdamage.be0 new file mode 100755 index 000000000..1462437aa --- /dev/null +++ b/libXdamage.be0 @@ -0,0 +1,32 @@ +#!/bin/env beesh + +# BEE_VERSION libXdamage-1.1.6-0 + +#SRCURL[0]="https://www.x.org/releases/individual/lib/libXdamage-${PKGVERSION}.tar.xz" +SRCURL[0]="https://beehive.molgen.mpg.de/ca55d29fa0a8b5c4a89f609a7952ebf8/libXdamage-1.1.6.tar.xz" + +# PATCHURL+=() + +# build_in_sourcedir + +# sourcesubdir_append src + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} diff --git a/libXext-1.3.2-0.bee b/libXext-1.3.2-0.bee deleted file mode 100755 index b70aba430..000000000 --- a/libXext-1.3.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXext-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/libXext.be0 b/libXext.be0 new file mode 100755 index 000000000..2fe5fe57c --- /dev/null +++ b/libXext.be0 @@ -0,0 +1,32 @@ +#!/bin/env beesh + +# BEE_VERSION libXext-1.3.6-0 + +#SRCURL[0]="https://www.x.org/releases/individual/lib/libXext-${PKGVERSION}.tar.xz" +SRCURL[0]="https://beehive.molgen.mpg.de/e59476db179e48c1fb4487c12d0105d1/libXext-1.3.6.tar.xz" + +# PATCHURL+=() + +# build_in_sourcedir + +# sourcesubdir_append src + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} diff --git a/libXi-1.7.2-0.bee b/libXi-1.7.2-0.bee deleted file mode 100755 index d5409a472..000000000 --- a/libXi-1.7.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXi-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/libXi.be0 b/libXi.be0 new file mode 100755 index 000000000..8f59f7619 --- /dev/null +++ b/libXi.be0 @@ -0,0 +1,32 @@ +#!/bin/env beesh + +# BEE_VERSION libXi-1.8.1-0 + +#SRCURL[0]="https://www.x.org/releases/individual/lib/libXi-${PKGVERSION}.tar.xz" +SRCURL[0]="https://beehive.molgen.mpg.de/89ac74ad6829c08d5c8ae8f48d363b06/libXi-1.8.1.tar.xz" + +# PATCHURL+=() + +# build_in_sourcedir + +# sourcesubdir_append src + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} diff --git a/libXinerama-1.1.3-0.bee b/libXinerama-1.1.3-0.bee deleted file mode 100755 index 05fa38ea4..000000000 --- a/libXinerama-1.1.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXinerama-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/libXinerama.be0 b/libXinerama.be0 new file mode 100755 index 000000000..0bd9863ea --- /dev/null +++ b/libXinerama.be0 @@ -0,0 +1,32 @@ +#!/bin/env beesh + +# BEE_VERSION libXinerama-1.1.5-0 + +#SRCURL[0]="https://www.x.org/releases/individual/lib/libXinerama-${PKGVERSION}.tar.xz" +SRCURL[0]="https://beehive.molgen.mpg.de/228c877558c265d2f63c56a03f7d3f21/libXinerama-1.1.5.tar.xz" + +# PATCHURL+=() + +# build_in_sourcedir + +# sourcesubdir_append src + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} diff --git a/libXrandr.be0 b/libXrandr.be0 index f2e9be912..edbe7a151 100755 --- a/libXrandr.be0 +++ b/libXrandr.be0 @@ -1,50 +1,16 @@ -#!/usr/bin/env beesh +#!/bin/env beesh -# BEE_VERSION libXrandr-1.5.1-0 +# BEE_VERSION libXrandr-1.5.4-0 -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="https://www.x.org/releases/individual/lib/libXrandr-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. +#SRCURL[0]="https://www.x.org/releases/individual/lib/libXrandr-${PKGVERSION}.tar.xz" +SRCURL[0]="https://beehive.molgen.mpg.de/24e0b72abe16efce9bf10579beaffc27/libXrandr-1.5.4.tar.xz" # PATCHURL+=() -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - # build_in_sourcedir -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - # sourcesubdir_append src - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - #mee_extract() { # bee_extract "${@}" #} @@ -64,22 +30,3 @@ SRCURL[0]="https://www.x.org/releases/individual/lib/libXrandr-${PKGVERSION}.tar #mee_install() { # bee_install #} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/libXrender-0.9.8-0.bee b/libXrender-0.9.8-0.bee deleted file mode 100755 index 5aeb248e0..000000000 --- a/libXrender-0.9.8-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXrender-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/libXrender.be0 b/libXrender.be0 new file mode 100755 index 000000000..11a067a48 --- /dev/null +++ b/libXrender.be0 @@ -0,0 +1,32 @@ +#!/bin/env beesh + +# BEE_VERSION libXrender-0.9.11-0 + +#SRCURL[0]="https://www.x.org/releases/individual/lib/libXrender-${PKGVERSION}.tar.xz" +SRCURL[0]="https://beehive.molgen.mpg.de/ebf7fb3241ec03e8a3b2af72f03b4631/libXrender-0.9.11.tar.xz" + +# PATCHURL+=() + +# build_in_sourcedir + +# sourcesubdir_append src + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} diff --git a/libXv-1.0.10-0.bee b/libXv-1.0.10-0.bee deleted file mode 100755 index a4a74ba21..000000000 --- a/libXv-1.0.10-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXv-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/libXv.be0 b/libXv.be0 new file mode 100755 index 000000000..339335a5c --- /dev/null +++ b/libXv.be0 @@ -0,0 +1,32 @@ +#!/bin/env beesh + +# BEE_VERSION libXv-1.0.12-0 + +#SRCURL[0]="https://www.x.org/releases/individual/lib/libXv-${PKGVERSION}.tar.xz" +SRCURL[0]="https://beehive.molgen.mpg.de/70bfdd14ca1a563c218794413f0c1f42/libXv-1.0.12.tar.xz" + +# PATCHURL+=() + +# build_in_sourcedir + +# sourcesubdir_append src + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} diff --git a/libXvMC-1.0.8-0.bee b/libXvMC-1.0.8-0.bee deleted file mode 100755 index 03b9951e2..000000000 --- a/libXvMC-1.0.8-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXvMC-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/libXvMC.be0 b/libXvMC.be0 new file mode 100755 index 000000000..1eb8db6f0 --- /dev/null +++ b/libXvMC.be0 @@ -0,0 +1,32 @@ +#!/bin/env beesh + +# BEE_VERSION libXvMC-1.0.14-0 + +#SRCURL[0]="https://www.x.org/releases/individual/lib/libXvMC-${PKGVERSION}.tar.xz" +SRCURL[0]="https://beehive.molgen.mpg.de/a90a5f01102dc445c7decbbd9ef77608/libXvMC-1.0.14.tar.xz" + +# PATCHURL+=() + +# build_in_sourcedir + +# sourcesubdir_append src + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} diff --git a/libXxf86vm-1.1.3-0.bee b/libXxf86vm-1.1.3-0.bee deleted file mode 100755 index b92f751ae..000000000 --- a/libXxf86vm-1.1.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libXxf86vm-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/libXxf86vm.be0 b/libXxf86vm.be0 new file mode 100755 index 000000000..e19976c45 --- /dev/null +++ b/libXxf86vm.be0 @@ -0,0 +1,32 @@ +#!/bin/env beesh + +# BEE_VERSION libXxf86vm-1.1.5-0 + +#SRCURL[0]="https://www.x.org/releases/individual/lib/libXxf86vm-${PKGVERSION}.tar.xz" +SRCURL[0]="https://beehive.molgen.mpg.de/5b913dac587f2de17a02e17f9a44a75f/libXxf86vm-1.1.5.tar.xz" + +# PATCHURL+=() + +# build_in_sourcedir + +# sourcesubdir_append src + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} diff --git a/libdmx-1.1.3-0.bee b/libdmx-1.1.3-0.bee deleted file mode 100755 index e8efd1f2a..000000000 --- a/libdmx-1.1.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libdmx-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/libdmx.be0 b/libdmx.be0 new file mode 100755 index 000000000..60261c3a0 --- /dev/null +++ b/libdmx.be0 @@ -0,0 +1,32 @@ +#!/bin/env beesh + +# BEE_VERSION libdmx-1.1.5-0 + +#SRCURL[0]="https://www.x.org/releases/individual/lib/libdmx-${PKGVERSION}.tar.xz" +SRCURL[0]="https://beehive.molgen.mpg.de/ca5b5017987d2eee289485b54506ff5c/libdmx-1.1.5.tar.xz" + +# PATCHURL+=() + +# build_in_sourcedir + +# sourcesubdir_append src + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} diff --git a/libxkbfile-1.0.8-0.bee b/libxkbfile-1.0.8-0.bee deleted file mode 100755 index 892a3239e..000000000 --- a/libxkbfile-1.0.8-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/lib/libxkbfile-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/libxkbfile.be0 b/libxkbfile.be0 new file mode 100755 index 000000000..d9209ca9b --- /dev/null +++ b/libxkbfile.be0 @@ -0,0 +1,32 @@ +#!/bin/env beesh + +# BEE_VERSION libxkbfile-1.1.3-0 + +#SRCURL[0]="https://www.x.org/releases/individual/lib/libxkbfile-${PKGVERSION}.tar.xz" +SRCURL[0]="https://beehive.molgen.mpg.de/229708c15c9937b6e5131d0413474139/libxkbfile-1.1.3.tar.xz" + +# PATCHURL+=() + +# build_in_sourcedir + +# sourcesubdir_append src + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#}