diff --git a/alsa-lib-1.0.23-0.bee b/alsa-lib-1.0.23-0.bee deleted file mode 100755 index 9402df8a2..000000000 --- a/alsa-lib-1.0.23-0.bee +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/env beesh - -SRCURL[0]="http://gd.tuwien.ac.at/opsys/linux/alsa/lib/alsa-lib-${PKGVERSION}.tar.bz2" - -PATCHURL[0]="" - -PGRP=( uncategorized ) - - - -# BEE_CONFIGURE=compat - -# EXCLUDE="" - -mee_patch() { - bee_patch -} - -mee_configure() { - bee_configure --enable-static -} - -mee_build() { - bee_build -} - -mee_install() { - bee_install -} - diff --git a/alsa-lib.be0 b/alsa-lib.be0 new file mode 100755 index 000000000..fc03aa3a2 --- /dev/null +++ b/alsa-lib.be0 @@ -0,0 +1,85 @@ +#!/usr/bin/env beesh + +# BEE_VERSION alsa-lib-1.1.2-0 + +## this file was created by bee init and should be executed to build a +## bee-package. (Additional hints are located at the end of this file.) + +############################################################################### +## The source URL(s) define the location of the sources that will be +## downloaded. Version variables may be used to simplify reuse of this bee-file. + +SRCURL[0]="ftp://ftp.alsa-project.org/pub/lib/alsa-lib-${PKGVERSION}.tar.bz2" + +############################################################################### +## Add URLs/pathes to patch files to the PATCHURL array. +## The sources will be patched in the order of the array. + +# PATCHURL+=() + +############################################################################### +## Add filename patterns to the EXCLUDE array of files that should not +## be added to you package but may be present in the image directory. + +# EXCLUDE+=() + +############################################################################### +## Uncomment the next statement, if the software may not be able to be build +## outside the source directory and need to be build inside the source +## directory. + +# build_in_sourcedir + +############################################################################### +## bee cannot detect buildtypes specified in subdirectories. +## Sometimes packages "hide" the real sources in a subdirectory named +## 'src' or 'cmake' or .. +## use 'sourcesubdir_append' to specify this directory if known. + +# sourcesubdir_append src + + +############################################################################### +## Change the default (auto-detected) steps to +## extract, patch, configure/setup, build and install the software. +## Make sure the mee_install function does install everything to the +## image directory "${D}" + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} +## by default this may be 'make install DESTDIR="${D}"' + +############################################################################### +## +## Additional hints: +## +## The name of this bee-file should follow the following naming convention: +## pkgname-pkgversion-pkgrevision.bee +## +## You may remove all comments as long as SRCURL[0] is set. +## +## Everything in this file will be executed in a bash environment. +## +## Build the package by executing +## './pkg-version-N.bee' or +## 'beesh ./pkg-version-N.bee' +## +## see http://beezinga.org/ +## diff --git a/alsa-oss-1.0.17-0.bee b/alsa-oss-1.0.17-0.bee deleted file mode 100755 index f7b53bfe2..000000000 --- a/alsa-oss-1.0.17-0.bee +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/env beesh - -SRCURL[0]="ftp://ftp.alsa-project.org/pub/oss-lib/alsa-oss-1.0.17.tar.bz2" - -PATCHURL[0]="" - -PGRP=( uncategorized ) - - - -# BEE_CONFIGURE=compat - -# EXCLUDE="" - -mee_patch() { - bee_patch -} - -mee_configure() { - bee_configure -} - -mee_build() { - bee_build -} - -mee_install() { - bee_install -} - diff --git a/alsa-oss.be0 b/alsa-oss.be0 new file mode 100755 index 000000000..2fe07b29c --- /dev/null +++ b/alsa-oss.be0 @@ -0,0 +1,85 @@ +#!/usr/bin/env beesh + +# BEE_VERSION alsa-oss-1.0.28-0 + +## this file was created by bee init and should be executed to build a +## bee-package. (Additional hints are located at the end of this file.) + +############################################################################### +## The source URL(s) define the location of the sources that will be +## downloaded. Version variables may be used to simplify reuse of this bee-file. + +SRCURL[0]="ftp://ftp.alsa-project.org/pub/oss-lib/alsa-oss-${PKGVERSION}.tar.bz2" + +############################################################################### +## Add URLs/pathes to patch files to the PATCHURL array. +## The sources will be patched in the order of the array. + +# PATCHURL+=() + +############################################################################### +## Add filename patterns to the EXCLUDE array of files that should not +## be added to you package but may be present in the image directory. + +# EXCLUDE+=() + +############################################################################### +## Uncomment the next statement, if the software may not be able to be build +## outside the source directory and need to be build inside the source +## directory. + +# build_in_sourcedir + +############################################################################### +## bee cannot detect buildtypes specified in subdirectories. +## Sometimes packages "hide" the real sources in a subdirectory named +## 'src' or 'cmake' or .. +## use 'sourcesubdir_append' to specify this directory if known. + +# sourcesubdir_append src + + +############################################################################### +## Change the default (auto-detected) steps to +## extract, patch, configure/setup, build and install the software. +## Make sure the mee_install function does install everything to the +## image directory "${D}" + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} +## by default this may be 'make install DESTDIR="${D}"' + +############################################################################### +## +## Additional hints: +## +## The name of this bee-file should follow the following naming convention: +## pkgname-pkgversion-pkgrevision.bee +## +## You may remove all comments as long as SRCURL[0] is set. +## +## Everything in this file will be executed in a bash environment. +## +## Build the package by executing +## './pkg-version-N.bee' or +## 'beesh ./pkg-version-N.bee' +## +## see http://beezinga.org/ +## diff --git a/alsa-plugins-1.0.23-0.bee b/alsa-plugins-1.0.23-0.bee deleted file mode 100755 index e905a21ee..000000000 --- a/alsa-plugins-1.0.23-0.bee +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/env beesh - -SRCURL[0]="ftp://ftp.alsa-project.org/pub/plugins/alsa-plugins-1.0.23.tar.bz2" - -PATCHURL[0]="" - -PGRP=( uncategorized ) - - - -# BEE_CONFIGURE=compat - -# EXCLUDE="" - -mee_patch() { - bee_patch -} - -mee_configure() { - bee_configure -} - -mee_build() { - bee_build -} - -mee_install() { - bee_install -} - diff --git a/alsa-plugins.be0 b/alsa-plugins.be0 new file mode 100755 index 000000000..bcfe2e158 --- /dev/null +++ b/alsa-plugins.be0 @@ -0,0 +1,85 @@ +#!/usr/bin/env beesh + +# BEE_VERSION alsa-plugins-1.1.1-0 + +## this file was created by bee init and should be executed to build a +## bee-package. (Additional hints are located at the end of this file.) + +############################################################################### +## The source URL(s) define the location of the sources that will be +## downloaded. Version variables may be used to simplify reuse of this bee-file. + +SRCURL[0]="ftp://ftp.alsa-project.org/pub/plugins/alsa-plugins-${PKGVERSION}.tar.bz2" + +############################################################################### +## Add URLs/pathes to patch files to the PATCHURL array. +## The sources will be patched in the order of the array. + +# PATCHURL+=() + +############################################################################### +## Add filename patterns to the EXCLUDE array of files that should not +## be added to you package but may be present in the image directory. + +# EXCLUDE+=() + +############################################################################### +## Uncomment the next statement, if the software may not be able to be build +## outside the source directory and need to be build inside the source +## directory. + +# build_in_sourcedir + +############################################################################### +## bee cannot detect buildtypes specified in subdirectories. +## Sometimes packages "hide" the real sources in a subdirectory named +## 'src' or 'cmake' or .. +## use 'sourcesubdir_append' to specify this directory if known. + +# sourcesubdir_append src + + +############################################################################### +## Change the default (auto-detected) steps to +## extract, patch, configure/setup, build and install the software. +## Make sure the mee_install function does install everything to the +## image directory "${D}" + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} +## by default this may be 'make install DESTDIR="${D}"' + +############################################################################### +## +## Additional hints: +## +## The name of this bee-file should follow the following naming convention: +## pkgname-pkgversion-pkgrevision.bee +## +## You may remove all comments as long as SRCURL[0] is set. +## +## Everything in this file will be executed in a bash environment. +## +## Build the package by executing +## './pkg-version-N.bee' or +## 'beesh ./pkg-version-N.bee' +## +## see http://beezinga.org/ +## diff --git a/alsa-utils-1.0.23-0.bee b/alsa-utils-1.0.23-0.bee deleted file mode 100755 index 6722fc6a7..000000000 --- a/alsa-utils-1.0.23-0.bee +++ /dev/null @@ -1,31 +0,0 @@ -#!/bin/env beesh - -SRCURL[0]="ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.23.tar.bz2" - -PATCHURL[0]="" - -PGRP=( uncategorized ) - -B=${S} - - -# BEE_CONFIGURE=compat - -# EXCLUDE="" - -mee_patch() { - bee_patch -} - -mee_configure() { - bee_configure -} - -mee_build() { - bee_build -} - -mee_install() { - bee_install -} - diff --git a/alsa-utils.be0 b/alsa-utils.be0 new file mode 100755 index 000000000..11438ec02 --- /dev/null +++ b/alsa-utils.be0 @@ -0,0 +1,85 @@ +#!/usr/bin/env beesh + +# BEE_VERSION alsa-utils-1.1.2-0 +# +## this file was created by bee init and should be executed to build a +## bee-package. (Additional hints are located at the end of this file.) + +############################################################################### +## The source URL(s) define the location of the sources that will be +## downloaded. Version variables may be used to simplify reuse of this bee-file. + +SRCURL[0]="ftp://ftp.alsa-project.org/pub/utils/alsa-utils-${PKGVERSION}.tar.bz2" + +############################################################################### +## Add URLs/pathes to patch files to the PATCHURL array. +## The sources will be patched in the order of the array. + +# PATCHURL+=() + +############################################################################### +## Add filename patterns to the EXCLUDE array of files that should not +## be added to you package but may be present in the image directory. + +# EXCLUDE+=() + +############################################################################### +## Uncomment the next statement, if the software may not be able to be build +## outside the source directory and need to be build inside the source +## directory. + +# build_in_sourcedir + +############################################################################### +## bee cannot detect buildtypes specified in subdirectories. +## Sometimes packages "hide" the real sources in a subdirectory named +## 'src' or 'cmake' or .. +## use 'sourcesubdir_append' to specify this directory if known. + +# sourcesubdir_append src + + +############################################################################### +## Change the default (auto-detected) steps to +## extract, patch, configure/setup, build and install the software. +## Make sure the mee_install function does install everything to the +## image directory "${D}" + +#mee_extract() { +# bee_extract "${@}" +#} + +#mee_patch() { +# bee_patch "${@}" +#} + +#mee_configure() { +# bee_configure +#} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} +## by default this may be 'make install DESTDIR="${D}"' + +############################################################################### +## +## Additional hints: +## +## The name of this bee-file should follow the following naming convention: +## pkgname-pkgversion-pkgrevision.bee +## +## You may remove all comments as long as SRCURL[0] is set. +## +## Everything in this file will be executed in a bash environment. +## +## Build the package by executing +## './pkg-version-N.bee' or +## 'beesh ./pkg-version-N.bee' +## +## see http://beezinga.org/ +## diff --git a/json-c-0.9-0.bee b/json-c-0.9-0.bee deleted file mode 100755 index 8aaff216a..000000000 --- a/json-c-0.9-0.bee +++ /dev/null @@ -1,37 +0,0 @@ -#!/usr/bin/env beesh - -SRCURL[0]="http://oss.metaparadigm.com/json-c/json-c-${PKGVERSION}.tar.gz" - -PATCHURL[0]="http://pkgs.fedoraproject.org/gitweb/?p=json-c.git;a=blob_plain;f=json-c-add-json_tokener_parse_verbose-and-return-NULL-on-pa.patch;hb=82503f999cd2400ef659d8fb64765d106147de68 json-c-add-json_tokener_parse_verbose-and-return-NULL-on-pa.patch" - -# BEE_CONFIGURE=compat - -# BEE_BUILDTYPE= - -# EXCLUDE="" - -# build_in_sourcedir - - - - - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} diff --git a/json-c.be0 b/json-c.be0 new file mode 100755 index 000000000..55f9f80d0 --- /dev/null +++ b/json-c.be0 @@ -0,0 +1,86 @@ +#!/usr/bin/env beesh + +# BEE_VERSION json-c-0.12.1-0 + +## this file was created by bee init and should be executed to build a +## bee-package. (Additional hints are located at the end of this file.) + +############################################################################### +## The source URL(s) define the location of the sources that will be +## downloaded. Version variables may be used to simplify reuse of this bee-file. + +SRCURL[0]="https://s3.amazonaws.com/json-c_releases/releases/json-c-${PKGVERSION}.tar.gz" + +############################################################################### +## Add URLs/pathes to patch files to the PATCHURL array. +## The sources will be patched in the order of the array. + +# PATCHURL+=() + +############################################################################### +## Add filename patterns to the EXCLUDE array of files that should not +## be added to you package but may be present in the image directory. + +# EXCLUDE+=() + +############################################################################### +## Uncomment the next statement, if the software may not be able to be build +## outside the source directory and need to be build inside the source +## directory. + +# build_in_sourcedir + +############################################################################### +## bee cannot detect buildtypes specified in subdirectories. +## Sometimes packages "hide" the real sources in a subdirectory named +## 'src' or 'cmake' or .. +## use 'sourcesubdir_append' to specify this directory if known. + +# sourcesubdir_append src + + +############################################################################### +## Change the default (auto-detected) steps to +## extract, patch, configure/setup, build and install the software. +## Make sure the mee_install function does install everything to the +## image directory "${D}" + +#mee_extract() { +# bee_extract "${@}" +#} + +mee_patch() { + bee_patch "${@}" + sed -i s/-Werror// Makefile.in +} + +mee_configure() { + bee_configure --disable-static +} + +#mee_build() { +# bee_build +#} + +#mee_install() { +# bee_install +#} +## by default this may be 'make install DESTDIR="${D}"' + +############################################################################### +## +## Additional hints: +## +## The name of this bee-file should follow the following naming convention: +## pkgname-pkgversion-pkgrevision.bee +## +## You may remove all comments as long as SRCURL[0] is set. +## +## Everything in this file will be executed in a bash environment. +## +## Build the package by executing +## './pkg-version-N.bee' or +## 'beesh ./pkg-version-N.bee' +## +## see http://beezinga.org/ +## diff --git a/pulseaudio-1.1-0.bee b/pulseaudio.be0 similarity index 88% rename from pulseaudio-1.1-0.bee rename to pulseaudio.be0 index c504332b0..65c14d56d 100755 --- a/pulseaudio-1.1-0.bee +++ b/pulseaudio.be0 @@ -1,5 +1,7 @@ #!/usr/bin/env beesh +# BEE_VERSION pulseaudio-9.0-0 + SRCURL[0]="http://freedesktop.org/software/pulseaudio/releases/pulseaudio-${PKGVERSION}.tar.xz" PATCHURL[0]="" @@ -25,7 +27,7 @@ PATCHURL[0]="" #} #mee_configure() { -# bee_configure +# bee_configure #} #mee_build() {