diff --git a/atkmm-2.22.5-0.bee b/atkmm-2.22.5-0.bee
deleted file mode 100755
index 56d7b61e3..000000000
--- a/atkmm-2.22.5-0.bee
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/env beesh
-
-SRCURL[0]="http://ftp.acc.umu.se/pub/gnome/sources/atkmm/${PKGVERSION[2]}/atkmm-${PKGVERSION}.tar.bz2"
-
-PATCHURL[0]=""
-
-# BEE_CONFIGURE=compat
-
-# EXCLUDE=""
-
-
-
-mee_extract() {
-    bee_extract ${@}
-}
-
-mee_patch() {
-    bee_patch ${@}
-}
-
-mee_configure() {
-    bee_configure 
-}
-
-mee_build() {
-    bee_build
-}
-
-mee_install() {
-    bee_install
-}
diff --git a/atkmm.be0 b/atkmm.be0
new file mode 100755
index 000000000..16e9720d3
--- /dev/null
+++ b/atkmm.be0
@@ -0,0 +1,79 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION atkmm-2.28.0-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://ftp.gnome.org/pub/gnome/sources/atkmm/${PKGVERSION[2]}/atkmm-${PKGVERSION}.tar.xz"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##
diff --git a/cairomm-1.9.8-0.bee b/cairomm-1.9.8-0.bee
deleted file mode 100755
index 4d8b35eee..000000000
--- a/cairomm-1.9.8-0.bee
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/env beesh
-
-SRCURL[0]="http://cairographics.org/releases/cairomm-${PKGVERSION}.tar.gz"
-
-PATCHURL[0]=""
-
-# BEE_CONFIGURE=compat
-
-# EXCLUDE=""
-
-
-
-mee_extract() {
-    bee_extract ${@}
-}
-
-mee_patch() {
-    bee_patch ${@}
-}
-
-mee_configure() {
-    bee_configure 
-}
-
-mee_build() {
-    bee_build
-}
-
-mee_install() {
-    bee_install
-}
diff --git a/cairomm.be0 b/cairomm.be0
new file mode 100755
index 000000000..f09c8a8c1
--- /dev/null
+++ b/cairomm.be0
@@ -0,0 +1,79 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION cairomm-1.12.2-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://cairographics.org/releases/cairomm-${PKGVERSION}.tar.gz"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##
diff --git a/glib2.be0 b/glib2.be0
index f34a6946a..39b1e3997 100755
--- a/glib2.be0
+++ b/glib2.be0
@@ -1,6 +1,6 @@
 #!/usr/bin/env beesh
 
-# BEE_VERSION glib2-2.58.1-0
+# BEE_VERSION glib2-2.60.5-0
 
 SRCURL[0]="https://ftp.acc.umu.se/pub/gnome/sources/glib/${PKGVERSION[2]}/glib-${PKGVERSION}.tar.xz"
 
@@ -8,8 +8,6 @@ SRCURL[0]="https://ftp.acc.umu.se/pub/gnome/sources/glib/${PKGVERSION[2]}/glib-$
 
 # BEE_CONFIGURE=compat
 
-BEE_BUILDTYPE=meson
-
 # EXCLUDE=""
 
 # build_in_sourcedir
@@ -31,7 +29,7 @@ mee_configure() {
 # with xattr enabled it tries to copy things like system.nfs4_acl which fails
 
     bee_configure \
-        -Dselinux=false \
+        -Dselinux=disabled \
         -Dxattr=false
 }
 
diff --git a/glibmm-2.44.0-0.bee b/glibmm-2.44.0-0.bee
deleted file mode 100755
index f0829215d..000000000
--- a/glibmm-2.44.0-0.bee
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/usr/bin/env beesh
-
-SRCURL[0]="http://ftp.gnome.org/pub/GNOME/sources/glibmm/${PKGVERSION[2]}/glibmm-${PKGVERSION}.tar.xz"
-
-PATCHURL[0]=""
-
-# BEE_CONFIGURE=compat
-
-# BEE_BUILDTYPE=
-
-# EXCLUDE=()
-
-# build_in_sourcedir
-
-
-
-
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
diff --git a/glibmm.be0 b/glibmm.be0
new file mode 100755
index 000000000..09bab0cf8
--- /dev/null
+++ b/glibmm.be0
@@ -0,0 +1,79 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION glibmm-2.60.0-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://ftp.gnome.org/pub/GNOME/sources/glibmm/${PKGVERSION[2]}/glibmm-${PKGVERSION}.tar.xz"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##
diff --git a/gnome-system-monitor-3.0.0-0.bee b/gnome-system-monitor-3.0.0-0.bee
deleted file mode 100755
index 4e94916a5..000000000
--- a/gnome-system-monitor-3.0.0-0.bee
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/env beesh
-
-SRCURL[0]="http://ftp.acc.umu.se/pub/gnome/sources/gnome-system-monitor/3.0/gnome-system-monitor-3.0.0.tar.bz2"
-
-PATCHURL[0]=""
-
-# BEE_CONFIGURE=compat
-
-# EXCLUDE=""
-
-
-
-mee_extract() {
-    bee_extract ${@}
-}
-
-mee_patch() {
-    bee_patch ${@}
-}
-
-mee_configure() {
-    bee_configure 
-}
-
-mee_build() {
-    bee_build
-}
-
-mee_install() {
-    bee_install
-}
diff --git a/gtk-engines-2.20.1-0.bee b/gtk-engines-2.20.1-0.bee
deleted file mode 100755
index c43bb8222..000000000
--- a/gtk-engines-2.20.1-0.bee
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/env beesh
-
-SRCURL[0]="http://ftp.gnome.org/pub/gnome/sources/gtk-engines/${PKGVERSION[2]}/gtk-engines-${PKGVERSION}.tar.bz2"
-
-PATCHURL[0]=""
-
-PGRP=( uncategorized )
-
-
-
-# BEE_CONFIGURE=compat
-
-# EXCLUDE=""
-
-mee_patch() {
-    bee_patch
-}
-
-mee_configure() {
-    bee_configure 
-}
-
-mee_build() {
-    bee_build
-}
-
-mee_install() {
-    bee_install
-}
-
diff --git a/gtk-engines.be0 b/gtk-engines.be0
new file mode 100755
index 000000000..86cad1ac9
--- /dev/null
+++ b/gtk-engines.be0
@@ -0,0 +1,79 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION gtk-engines-2.20.2-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://ftp.gnome.org/pub/gnome/sources/gtk-engines/${PKGVERSION[2]}/gtk-engines-${PKGVERSION}.tar.bz2"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##
diff --git a/gtk2mm-2.24.0-0.bee b/gtk2mm-2.24.0-0.bee
deleted file mode 100755
index d97632185..000000000
--- a/gtk2mm-2.24.0-0.bee
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/env beesh
-
-SRCURL[0]="http://ftp.gnome.org/pub/GNOME/sources/gtkmm/${PKGVERSION[2]}/gtkmm-${PKGVERSION}.tar.bz2"
-
-PATCHURL[0]=""
-
-# BEE_CONFIGURE=compat
-
-# EXCLUDE=""
-
-
-
-mee_extract() {
-    bee_extract ${@}
-}
-
-mee_patch() {
-    bee_patch ${@}
-}
-
-mee_configure() {
-    MMDOCTOOLDIR=/usr/share/mm-common/doctool bee_configure 
-}
-
-mee_build() {
-    bee_build
-}
-
-mee_install() {
-    bee_install
-}
diff --git a/gtk2mm.be0 b/gtk2mm.be0
new file mode 100755
index 000000000..999b77237
--- /dev/null
+++ b/gtk2mm.be0
@@ -0,0 +1,79 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION gtk2mm-2.24.5-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://ftp.gnome.org/pub/GNOME/sources/gtkmm/${PKGVERSION[2]}/gtkmm-${PKGVERSION}.tar.xz"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##
diff --git a/gtk3.be0 b/gtk3.be0
index 5f7cd16e3..5fbdf18b4 100755
--- a/gtk3.be0
+++ b/gtk3.be0
@@ -1,6 +1,6 @@
 #!/usr/bin/env beesh
 
-# BEE_VERSION gtk3-3.24.8-0
+# BEE_VERSION gtk3-3.24.10-0
 
 ## this file was created by bee init and should be executed to build a
 ## bee-package. (Additional hints are located at the end of this file.)
diff --git a/gtk3mm-3.0.0-0.bee b/gtk3mm-3.0.0-0.bee
deleted file mode 100755
index bfd1c7708..000000000
--- a/gtk3mm-3.0.0-0.bee
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/env beesh
-
-SRCURL[0]="http://ftp.gnome.org/pub/GNOME/sources/gtkmm/${PKGVERSION[2]}/gtkmm-${PKGVERSION}.tar.bz2"
-
-PATCHURL[0]=""
-
-# BEE_CONFIGURE=compat
-
-# EXCLUDE=""
-
-
-
-mee_extract() {
-    bee_extract ${@}
-}
-
-mee_patch() {
-    bee_patch ${@}
-}
-
-mee_configure() {
-    bee_configure 
-}
-
-mee_build() {
-    bee_build
-}
-
-mee_install() {
-    bee_install
-}
diff --git a/gtk3mm.be0 b/gtk3mm.be0
new file mode 100755
index 000000000..02409385c
--- /dev/null
+++ b/gtk3mm.be0
@@ -0,0 +1,79 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION gtk3mm-3.24.1-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://ftp.gnome.org/pub/GNOME/sources/gtkmm/${PKGVERSION[2]}/gtkmm-${PKGVERSION}.tar.xz"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##
diff --git a/libsigc++-2.2.10-0.bee b/libsigc++-2.2.10-0.bee
deleted file mode 100755
index d1a0deb73..000000000
--- a/libsigc++-2.2.10-0.bee
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/usr/bin/env beesh
-
-SRCURL[0]="http://ftp.gnome.org/pub/GNOME/sources/libsigc++/${PKGVERSION[2]}/libsigc++-${PKGVERSION}.tar.xz"
-
-PATCHURL[0]=""
-
-# BEE_CONFIGURE=compat
-
-# BEE_BUILDTYPE=
-
-# EXCLUDE=()
-
-# build_in_sourcedir
-
-
-
-
-
-#mee_extract() {
-#    bee_extract "${@}"
-#}
-
-#mee_patch() {
-#    bee_patch "${@}"
-#}
-
-#mee_configure() {
-#    bee_configure 
-#}
-
-#mee_build() {
-#    bee_build
-#}
-
-#mee_install() {
-#    bee_install
-#}
diff --git a/libsigc++.be0 b/libsigc++.be0
new file mode 100755
index 000000000..7846771b9
--- /dev/null
+++ b/libsigc++.be0
@@ -0,0 +1,79 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION libsigc++-2.10.2-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://ftp.gnome.org/pub/GNOME/sources/libsigc++/${PKGVERSION[2]}/libsigc++-${PKGVERSION}.tar.xz"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##
diff --git a/libsigc++3.be0 b/libsigc++3.be0
new file mode 100755
index 000000000..2b26e4a25
--- /dev/null
+++ b/libsigc++3.be0
@@ -0,0 +1,79 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION libsigc++3-2.99.13-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://ftp.gnome.org/pub/GNOME/sources/libsigc++/${PKGVERSION[2]}/libsigc++-${PKGVERSION}.tar.xz"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##
diff --git a/pangomm-2.28.2-0.bee b/pangomm-2.28.2-0.bee
deleted file mode 100755
index bdae52fd7..000000000
--- a/pangomm-2.28.2-0.bee
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/env beesh
-
-SRCURL[0]="http://ftp.acc.umu.se/pub/GNOME/sources/pangomm/${PKGVERSION[2]}/pangomm-${PKGVERSION}.tar.bz2"
-
-PATCHURL[0]=""
-
-# BEE_CONFIGURE=compat
-
-# EXCLUDE=""
-
-
-
-mee_extract() {
-    bee_extract ${@}
-}
-
-mee_patch() {
-    bee_patch ${@}
-}
-
-mee_configure() {
-    bee_configure 
-}
-
-mee_build() {
-    bee_build
-}
-
-mee_install() {
-    bee_install
-}
diff --git a/pangomm.be0 b/pangomm.be0
new file mode 100755
index 000000000..232a49c35
--- /dev/null
+++ b/pangomm.be0
@@ -0,0 +1,79 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION pangomm-2.42.0-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://ftp.gnome.org/pub/GNOME/sources/pangomm/${PKGVERSION[2]}/pangomm-${PKGVERSION}.tar.xz"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##
diff --git a/pavucontrol.be0 b/pavucontrol.be0
index a423e8015..9618ceb27 100755
--- a/pavucontrol.be0
+++ b/pavucontrol.be0
@@ -1,6 +1,6 @@
 #!/usr/bin/env beesh
 
-# BEE_VERSION pavucontrol-3.0-0
+# BEE_VERSION pavucontrol-4.0-0
 
 ## The source URL(s) array
 SRCURL[0]="https://freedesktop.org/software/pulseaudio/pavucontrol/pavucontrol-${PKGVERSION}.tar.xz"
@@ -27,9 +27,9 @@ SRCURL[0]="https://freedesktop.org/software/pulseaudio/pavucontrol/pavucontrol-$
 #    bee_patch "${@}"
 #}
 
-mee_configure() {
-    CXXFLAGS='-D_GLIBCXX_USE_CXX11_ABI=0' bee_configure
-}
+#mee_configure() {
+#    bee_configure
+#}
 
 #mee_build() {
 #    bee_build
@@ -38,6 +38,6 @@ mee_configure() {
 ## mee_install() should install into "${D}"
 ## default: 'make install DESTDIR="${D}"'
 
-mee_install() {
-    bee_install
-}
+#mee_install() {
+#    bee_install
+#}