diff --git a/cairo.be0 b/cairo.be0
index 74904680e..14f0439ab 100755
--- a/cairo.be0
+++ b/cairo.be0
@@ -1,15 +1,11 @@
 #!/usr/bin/env beesh
 
-# BEE_VERSION cairo-1.17.2-4
+# BEE_VERSION cairo-1.18.2-0
 
-# SRCURL[0]="https://cairographics.org/snapshots/cairo-${PKGVERSION}.tar.xz"
-SRCURL[0]="https://beehive.molgen.mpg.de/321a07adaeb125cb5513079256d465fb/cairo-1.17.2.tar.xz"
+#SRCURL[0]="https://www.cairographics.org/releases/cairo-${PKGVERSION}.tar.xz"
+SRCURL[0]="https://beehive.molgen.mpg.de/5ad67c707edd0003f1b91c8bbc0005c1/cairo-1.18.2.tar.xz"
 
-# PATCHURL+=(/src/mariux/patches/0001-Revert-clip-boxes-Drop-too-early-return.patch)
-PATCHURL+=("https://beehive.molgen.mpg.de/fc7463f3e293e53ca34e123fb002e933/0001-Revert-clip-boxes-Drop-too-early-return.patch")
-
-# https://wiki.gentoo.org/wiki/Project:Toolchain/Binutils_2.34_porting_notes/undefined_reference_to_bfd_get_section_*
-PATCHURL+=("https://beehive.molgen.mpg.de/9c3a5d496da7ddad5f62f44cb8d624f9/cairo-1172-binutils-237-fix-bfd_get_section_vma.patch")
+# PATCHURL+=()
 
 # build_in_sourcedir
 
@@ -35,7 +31,3 @@ PATCHURL+=("https://beehive.molgen.mpg.de/9c3a5d496da7ddad5f62f44cb8d624f9/cairo
 #    bee_install
 #}
 
-mee_install_post() {
-    # remove html docs
-    rm -vrf ${D}/usr/share
-}
diff --git a/cairomm.be0 b/cairomm.be0
index cdb23339c..68d19bb38 100755
--- a/cairomm.be0
+++ b/cairomm.be0
@@ -1,9 +1,9 @@
 #!/usr/bin/env beesh
 
-# BEE_VERSION cairomm-1.12.2-1
+# BEE_VERSION cairomm-1.14.5-0
 
-#SRCURL[0]="https://cairographics.org/releases/cairomm-${PKGVERSION}.tar.gz"
-SRCURL[0]="https://beehive.molgen.mpg.de/9d2282ea34cf9aaa89208bb4bb911909/cairomm-1.12.2.tar.gz"
+#SRCURL[0]="https://www.cairographics.org/releases/cairomm-${PKGVERSION}.tar.xz"
+SRCURL[0]="https://beehive.molgen.mpg.de/0974ef291d491f22df287f588580677d/cairomm-1.14.5.tar.xz"
 
 # PATCHURL+=()
 
@@ -30,3 +30,4 @@ mee_configure() {
 #mee_install() {
 #    bee_install
 #}
+
diff --git a/fontconfig.be0 b/fontconfig.be0
index 860464082..084601c6e 100755
--- a/fontconfig.be0
+++ b/fontconfig.be0
@@ -1,31 +1,33 @@
-#!/usr//bin/env beesh
+#!/usr/bin/env beesh
 
-# BEE_VERSION fontconfig-2.12.4-0
+# BEE_VERSION fontconfig-2.15.0-1
 
-SRCURL[0]="https://fontconfig.org/release/fontconfig-${PKGVERSION}.tar.gz"
+#SRCURL[0]="https://www.freedesktop.org/software/fontconfig/release/fontconfig-${PKGVERSION}.tar.xz"
+SRCURL[0]="https://beehive.molgen.mpg.de/5bb3a2829aecb22ae553c39099bd0d6a/fontconfig-2.15.0.tar.xz"
 
-mee_patch() {
-  start_cmd rm -fv ${S}/src/fcobjshash.h
-}
+# PATCHURL+=()
 
-mee_configure() {
-    bee_configure \
-        --disable-docs
-}
+# build_in_sourcedir
 
-mee_install_post() {
-    ln -vs ${DATADIR}/fontconfig/conf.avail/25-unhint-nonlatin.conf ${D}${SYSCONFDIR}/fonts/conf.d/
+# sourcesubdir_append src
 
-    mkdir -pv ${D}${MANDIR}/man{1,3,5}
+#mee_extract() {
+#    bee_extract "${@}"
+#}
 
-    install -v -m644 ${S}/fc-*/*.1 ${D}${MANDIR}/man1
-    install -v -m644 ${S}/doc/*.3  ${D}${MANDIR}/man3
-    install -v -m644 ${S}/doc/fonts-conf.5 ${D}${MANDIR}/man5
+#mee_patch() {
+#    bee_patch "${@}"
+#}
 
-    mkdir -pv ${D}${DOCDIR}/fontconfig-devel
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
 
-    install -v -m644 ${S}/doc/fontconfig-devel/* \
-        ${D}${DOCDIR}/fontconfig-devel &&
-    install -v -m644 ${S}/doc/*.{pdf,sgml,txt,html} \
-        ${D}${DOCDIR}
-}
diff --git a/libsigc++3.be0 b/libsigc++3.be0
index 2b26e4a25..7e920731a 100755
--- a/libsigc++3.be0
+++ b/libsigc++3.be0
@@ -1,44 +1,16 @@
 #!/usr/bin/env beesh
 
-# BEE_VERSION libsigc++3-2.99.13-0
+# BEE_VERSION libsigc++3-3.6.0-0
 
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="https://ftp.gnome.org/pub/GNOME/sources/libsigc++/${PKGVERSION[2]}/libsigc++-${PKGVERSION}.tar.xz"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
+#SRCURL[0]="https://download.gnome.org/sources/libsigc++/${PKGVERSION[2]}/libsigc++-${PKGVERSION}.tar.xz"
+SRCURL[0]="https://beehive.molgen.mpg.de/b7205d5465ac15fbc0c781d39b4011be/libsigc++-3.6.0.tar.xz"
 
 # PATCHURL+=()
 
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be built
-## outside the source directory and needs to be built inside the source
-## directory.
-
 # build_in_sourcedir
 
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
 # sourcesubdir_append src
 
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
 #mee_extract() {
 #    bee_extract "${@}"
 #}
@@ -58,22 +30,4 @@ SRCURL[0]="https://ftp.gnome.org/pub/GNOME/sources/libsigc++/${PKGVERSION[2]}/li
 #mee_install() {
 #    bee_install
 #}
-## by default this may be 'make install DESTDIR="${D}"'
 
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0] is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##
diff --git a/pango.be0 b/pango.be0
index 62c7749a1..ad76f1cf6 100755
--- a/pango.be0
+++ b/pango.be0
@@ -1,13 +1,9 @@
 #!/usr/bin/env beesh
 
-# BEE_VERSION pango-1.49.1-0
+# BEE_VERSION pango-1.54.0-0
 
-#SRCURL[0]="https://ftp.gnome.org/pub/gnome/sources/pango/${PKGVERSION[2]}/pango-${PKGVERSION}.tar.xz"
-# https://download.gnome.org/sources/pango/1.49/pango-1.49.1.tar.xz
-SRCURL[0]="https://beehive.molgen.mpg.de/082556d5ad49629df34492c3573754af/pango-${PKGVERSION}.tar.xz"
-
-
-# Dependency fribidi found: NO found 1.0.2 but need: '>= 1.0.6'
+#SRCURL[0]="https://download.gnome.org/sources/pango/${PKGVERSION[2]}/pango-${PKGVERSION}.tar.xz"
+SRCURL[0]="https://beehive.molgen.mpg.de/7ad89b03f6850e0be28f91522b793842/pango-1.54.0.tar.xz"
 
 # PATCHURL+=()
 
@@ -23,11 +19,9 @@ SRCURL[0]="https://beehive.molgen.mpg.de/082556d5ad49629df34492c3573754af/pango-
 #    bee_patch "${@}"
 #}
 
-mee_configure() {
-    bee_configure \
-        --wrap-mode=nofallback
-
-}
+#mee_configure() {
+#    bee_configure
+#}
 
 #mee_build() {
 #    bee_build
@@ -36,3 +30,4 @@ mee_configure() {
 #mee_install() {
 #    bee_install
 #}
+
diff --git a/pangomm.be0 b/pangomm.be0
index 232a49c35..5d6e28b1f 100755
--- a/pangomm.be0
+++ b/pangomm.be0
@@ -1,44 +1,16 @@
 #!/usr/bin/env beesh
 
-# BEE_VERSION pangomm-2.42.0-0
+# BEE_VERSION pangomm-2.46.4-0
 
-## this file was created by bee init and should be executed to build a
-## bee-package. (Additional hints are located at the end of this file.)
-
-###############################################################################
-## The source URL(s) define the location of the sources that will be
-## downloaded. Version variables may be used to simplify reuse of this bee-file.
-
-SRCURL[0]="https://ftp.gnome.org/pub/GNOME/sources/pangomm/${PKGVERSION[2]}/pangomm-${PKGVERSION}.tar.xz"
-
-###############################################################################
-## Add URLs/pathes to patch files to the PATCHURL array.
-## The sources will be patched in the order of the array.
+#SRCURL[0]="https://download.gnome.org/sources/pangomm/${PKGVERSION[2]}/pangomm-${PKGVERSION}.tar.xz"
+SRCURL[0]="https://beehive.molgen.mpg.de/5947d35899db62813531d7ea8faee60c/pangomm-2.46.4.tar.xz"
 
 # PATCHURL+=()
 
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be built
-## outside the source directory and needs to be built inside the source
-## directory.
-
 # build_in_sourcedir
 
-###############################################################################
-## bee cannot detect buildtypes specified in subdirectories.
-## Sometimes packages "hide" the real sources in a subdirectory named
-## 'src' or 'cmake' or ..
-## use 'sourcesubdir_append' to specify this directory if known.
-
 # sourcesubdir_append src
 
-
-###############################################################################
-## Change the default (auto-detected) steps to
-## extract, patch, configure/setup, build and install the software.
-## Make sure the mee_install function does install everything to the
-## image directory "${D}"
-
 #mee_extract() {
 #    bee_extract "${@}"
 #}
@@ -58,22 +30,4 @@ SRCURL[0]="https://ftp.gnome.org/pub/GNOME/sources/pangomm/${PKGVERSION[2]}/pang
 #mee_install() {
 #    bee_install
 #}
-## by default this may be 'make install DESTDIR="${D}"'
 
-###############################################################################
-##
-## Additional hints:
-##
-## The name of this bee-file should follow the following naming convention:
-##     pkgname-pkgversion-pkgrevision.bee
-##
-## You may remove all comments as long as SRCURL[0] is set.
-##
-## Everything in this file will be executed in a bash environment.
-##
-## Build the package by executing
-##     './pkg-version-N.bee' or
-##     'beesh ./pkg-version-N.bee'
-##
-## see http://beezinga.org/
-##