diff --git a/bigreqsproto-1.1.2-0.bee b/bigreqsproto-1.1.2-0.bee deleted file mode 100755 index 0556cce26..000000000 --- a/bigreqsproto-1.1.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/bigreqsproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/compositeproto-0.4.2-0.bee b/compositeproto-0.4.2-0.bee deleted file mode 100755 index b7f507cbf..000000000 --- a/compositeproto-0.4.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/compositeproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/damageproto-1.2.1-0.bee b/damageproto-1.2.1-0.bee deleted file mode 100755 index 63202b2f6..000000000 --- a/damageproto-1.2.1-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/damageproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/dmxproto-2.3.1-0.bee b/dmxproto-2.3.1-0.bee deleted file mode 100755 index 896f9506a..000000000 --- a/dmxproto-2.3.1-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/dmxproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/dri2proto-2.8-0.bee b/dri2proto-2.8-0.bee deleted file mode 100755 index ee2fd6e45..000000000 --- a/dri2proto-2.8-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/dri2proto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/dri3proto-1.0-0.bee b/dri3proto-1.0-0.bee deleted file mode 100755 index 27ef05719..000000000 --- a/dri3proto-1.0-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/dri3proto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/fixesproto-5.0-0.bee b/fixesproto-5.0-0.bee deleted file mode 100755 index 62038fdd6..000000000 --- a/fixesproto-5.0-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/fixesproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/fontsproto-2.1.3-0.bee b/fontsproto-2.1.3-0.bee deleted file mode 100755 index 2cb8d23d8..000000000 --- a/fontsproto-2.1.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/fontsproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/glproto-1.4.17-1.bee b/glproto-1.4.17-1.bee deleted file mode 100755 index d1a8a17ef..000000000 --- a/glproto-1.4.17-1.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/glproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/inputproto-2.3-0.bee b/inputproto-2.3-0.bee deleted file mode 100755 index 12327a468..000000000 --- a/inputproto-2.3-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/inputproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/kbproto-1.0.6-0.bee b/kbproto-1.0.6-0.bee deleted file mode 100755 index 1e19a4ec1..000000000 --- a/kbproto-1.0.6-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/kbproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/linux-headers.be0 b/linux-headers.be0 index 085862861..58de8784b 100755 --- a/linux-headers.be0 +++ b/linux-headers.be0 @@ -1,6 +1,6 @@ #!/usr/bin/env beesh -# BEE_VERSION linux-headers-4.9.10-0 +# BEE_VERSION linux-headers-4.14.76-0 ## this file was created by bee init and should be executed to build a ## bee-package. (Additional hints are located at the end of this file.) diff --git a/presentproto.be0 b/presentproto.be0 deleted file mode 100755 index a6f090e11..000000000 --- a/presentproto.be0 +++ /dev/null @@ -1,85 +0,0 @@ -#!/usr/bin/env beesh - -# BEE_VERSION presentproto-1.1-0 - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/presentproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/printproto-1.0.4-0.bee b/printproto-1.0.4-0.bee deleted file mode 100755 index cdc94d261..000000000 --- a/printproto-1.0.4-0.bee +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/env beesh - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/printproto-${PKGVERSION}.tar.bz2" - -PATCHURL[0]="" - -PGRP=( uncategorized ) - - - -# BEE_CONFIGURE=compat - -# EXCLUDE="" - -mee_patch() { - bee_patch -} - -mee_configure() { - bee_configure -} - -mee_build() { - bee_build -} - -mee_install() { - bee_install -} - diff --git a/randrproto-1.5.0-0.bee b/randrproto-1.5.0-0.bee deleted file mode 100755 index caa4af410..000000000 --- a/randrproto-1.5.0-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/randrproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/recordproto-1.14.2-0.bee b/recordproto-1.14.2-0.bee deleted file mode 100755 index a416e753d..000000000 --- a/recordproto-1.14.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/recordproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/renderproto-0.11.1-0.bee b/renderproto-0.11.1-0.bee deleted file mode 100755 index c00158806..000000000 --- a/renderproto-0.11.1-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/renderproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/resourceproto-1.2.0-0.bee b/resourceproto-1.2.0-0.bee deleted file mode 100755 index 08da87d7a..000000000 --- a/resourceproto-1.2.0-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/resourceproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/scripts/update-x-server.sh b/scripts/update-x-server.sh new file mode 100755 index 000000000..75f7d0220 --- /dev/null +++ b/scripts/update-x-server.sh @@ -0,0 +1,29 @@ +#! /bin/bash + +sudo bee remove bigreqsproto-1.1.2-0.x86_64 +sudo bee remove compositeproto-0.4.2-0.x86_64 +sudo bee remove damageproto-1.2.1-0.x86_64 +sudo bee remove dmxproto-2.3.1-0.x86_64 +sudo bee remove dri2proto-2.8-0.x86_64 +sudo bee remove dri3proto-1.0-0.x86_64 +sudo bee remove fixesproto-5.0-0.x86_64 +sudo bee remove fontsproto-2.1.3-0.x86_64 +sudo bee remove glproto-1.4.17-1.x86_64 +sudo bee remove inputproto-2.3-0.x86_64 +sudo bee remove kbproto-1.0.6-0.x86_64 +sudo bee remove presentproto-1.1-0.x86_64 +sudo bee remove randrproto-1.5.0-0.x86_64 +sudo bee remove renderproto-0.11.1-0.x86_64 +sudo bee remove videoproto-2.3.2-0.x86_64 +sudo bee remove xf86driproto-2.1.1-0.x86_64 +sudo bee remove xproto-7.0.31-0.x86_64 + +sudo bee update xorgproto-2018.4-0.x86_64 + +sudo bee update xorg-server-1.20.2-0.x86_64 + +sudo bee update xf86-video-amdgpu-18.1.0-0.x86_64 +sudo bee update xf86-video-nouveau-1.0.15-2.x86_64 + +sudo bee update linux-headers-4.14.76-0 +sudo bee update tigervnc-1.9.0-0 diff --git a/scrnsaverproto-1.2.2-0.bee b/scrnsaverproto-1.2.2-0.bee deleted file mode 100755 index a0fd924d4..000000000 --- a/scrnsaverproto-1.2.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/scrnsaverproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/tigervnc.be0 b/tigervnc.be0 index 2cf00fb30..eccf17b23 100755 --- a/tigervnc.be0 +++ b/tigervnc.be0 @@ -1,9 +1,9 @@ #!/usr/bin/env beesh -# BEE_VERSION tigervnc-1.8.0-2 +# BEE_VERSION tigervnc-1.9.0-0 -XORG_SERVER_VERSION=1.19.6 -XORG_SERVER_NNN=119 +XORG_SERVER_VERSION=1.20.2 +XORG_SERVER_NNN=120 ## this file was created by bee init and should be executed to build a ## bee-package. (Additional hints are located at the end of this file.) @@ -32,7 +32,7 @@ PATCHURL+=(/src/mariux/patches/tigervnc-vncserver-Change-default-xstartup-to-xfc ## outside the source directory and needs to be built inside the source ## directory. -# build_in_sourcedir +build_in_sourcedir ############################################################################### ## bee cannot detect buildtypes specified in subdirectories. @@ -69,11 +69,11 @@ mee_configure() { fi eval DEFCONFIG=\"${DEFCONFIG}\" - start_cmd cp -R $S/unix/xserver $B/unix/ start_cmd cp -R $S/xorg-server-$XORG_SERVER_VERSION/* $B/unix/xserver/ start_cmd cd unix/xserver start_cmd patch -p1 < $S/unix/xserver$XORG_SERVER_NNN.patch start_cmd autoreconf -fiv + export CFLAGS="$CFLAGS -I/usr/include/drm" start_cmd ./configure $DEFCONFIG \ --with-pic --without-dtrace --disable-static --disable-dri \ --disable-xinerama --disable-xvfb --disable-xnest --disable-xorg \ @@ -103,6 +103,8 @@ mee_install() { start_cmd cd $B/unix/xserver bee_install rm $D$MANDIR/man1/Xserver.1 + rm $D$LIBDIR/xorg/protocol.txt + rm -r $D/var/lib/xkb/ ) } ## by default this may be 'make install DESTDIR="${D}"' diff --git a/videoproto-2.3.2-0.bee b/videoproto-2.3.2-0.bee deleted file mode 100755 index 3c5dba0ba..000000000 --- a/videoproto-2.3.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/videoproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xcmiscproto-1.2.2-0.bee b/xcmiscproto-1.2.2-0.bee deleted file mode 100755 index 00ecdb127..000000000 --- a/xcmiscproto-1.2.2-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xcmiscproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xextproto-7.3.0-0.bee b/xextproto-7.3.0-0.bee deleted file mode 100755 index cfd7aef46..000000000 --- a/xextproto-7.3.0-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xextproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xf86-video-amdgpu.be0 b/xf86-video-amdgpu.be0 index 46849644c..d8b40b482 100755 --- a/xf86-video-amdgpu.be0 +++ b/xf86-video-amdgpu.be0 @@ -1,6 +1,6 @@ #!/usr/bin/env beesh -# BEE_VERSION xf86-video-amdgpu-1.4.0-1 +# BEE_VERSION xf86-video-amdgpu-18.1.0-0 ## this file was created by bee init and should be executed to build a ## bee-package. (Additional hints are located at the end of this file.) diff --git a/xf86-video-nouveau.be0 b/xf86-video-nouveau.be0 index ca6dbce3e..69b0f0b2a 100755 --- a/xf86-video-nouveau.be0 +++ b/xf86-video-nouveau.be0 @@ -1,6 +1,6 @@ #!/usr/bin/env beesh -# BEE_VERSION xf86-video-nouveau-1.0.15-1 +# BEE_VERSION xf86-video-nouveau-1.0.15-2 ## this file was created by bee init and should be executed to build a ## bee-package. (Additional hints are located at the end of this file.) diff --git a/xf86bigfontproto-1.2.0-1.bee b/xf86bigfontproto-1.2.0-1.bee deleted file mode 100755 index 7d6311a0e..000000000 --- a/xf86bigfontproto-1.2.0-1.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xf86bigfontproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xf86dgaproto-2.1-1.bee b/xf86dgaproto-2.1-1.bee deleted file mode 100755 index cb0dee0b3..000000000 --- a/xf86dgaproto-2.1-1.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xf86dgaproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xf86driproto-2.1.1-0.bee b/xf86driproto-2.1.1-0.bee deleted file mode 100755 index 95ce8acf7..000000000 --- a/xf86driproto-2.1.1-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xf86driproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xf86vidmodeproto-2.3-1.bee b/xf86vidmodeproto-2.3-1.bee deleted file mode 100755 index 08b86072b..000000000 --- a/xf86vidmodeproto-2.3-1.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xf86vidmodeproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xineramaproto-1.2.1-0.bee b/xineramaproto-1.2.1-0.bee deleted file mode 100755 index 517402db0..000000000 --- a/xineramaproto-1.2.1-0.bee +++ /dev/null @@ -1,83 +0,0 @@ -#!/usr/bin/env beesh - -## this file was created by bee init and should be executed to build a -## bee-package. (Additional hints are located at the end of this file.) - -############################################################################### -## The source URL(s) define the location of the sources that will be -## downloaded. Version variables may be used to simplify reuse of this bee-file. - -SRCURL[0]="http://xorg.freedesktop.org/releases/individual/proto/xineramaproto-${PKGVERSION}.tar.bz2" - -############################################################################### -## Add URLs/pathes to patch files to the PATCHURL array. -## The sources will be patched in the order of the array. - -# PATCHURL+=() - -############################################################################### -## Add filename patterns to the EXCLUDE array of files that should not -## be added to you package but may be present in the image directory. - -# EXCLUDE+=() - -############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source -## directory. - -# build_in_sourcedir - -############################################################################### -## bee cannot detect buildtypes specified in subdirectories. -## Sometimes packages "hide" the real sources in a subdirectory named -## 'src' or 'cmake' or .. -## use 'sourcesubdir_append' to specify this directory if known. - -# sourcesubdir_append src - - -############################################################################### -## Change the default (auto-detected) steps to -## extract, patch, configure/setup, build and install the software. -## Make sure the mee_install function does install everything to the -## image directory "${D}" - -#mee_extract() { -# bee_extract "${@}" -#} - -#mee_patch() { -# bee_patch "${@}" -#} - -#mee_configure() { -# bee_configure -#} - -#mee_build() { -# bee_build -#} - -#mee_install() { -# bee_install -#} -## by default this may be 'make install DESTDIR="${D}"' - -############################################################################### -## -## Additional hints: -## -## The name of this bee-file should follow the following naming convention: -## pkgname-pkgversion-pkgrevision.bee -## -## You may remove all comments as long as SRCURL[0]="" is set. -## -## Everything in this file will be executed in a bash environment. -## -## Build the package by executing -## './pkg-version-N.bee' or -## 'beesh ./pkg-version-N.bee' -## -## see http://beezinga.org/ -## diff --git a/xorg-server.be0 b/xorg-server.be0 index b295bb45d..246595e78 100755 --- a/xorg-server.be0 +++ b/xorg-server.be0 @@ -1,6 +1,6 @@ #!/usr/bin/env beesh -# BEE_VERSION xorg-server-1.19.6-2 +# BEE_VERSION xorg-server-1.20.2-0 ## this file was created by bee init and should be executed to build a ## bee-package. (Additional hints are located at the end of this file.) diff --git a/xproto.be0 b/xorgproto.be0 similarity index 89% rename from xproto.be0 rename to xorgproto.be0 index 68d9869ed..9ea3f56ce 100755 --- a/xproto.be0 +++ b/xorgproto.be0 @@ -1,6 +1,6 @@ #!/usr/bin/env beesh -# BEE_VERSION xproto-7.0.31-0 +# BEE_VERSION xorgproto-2018.4-0 ## this file was created by bee init and should be executed to build a ## bee-package. (Additional hints are located at the end of this file.) @@ -9,7 +9,7 @@ ## The source URL(s) define the location of the sources that will be ## downloaded. Version variables may be used to simplify reuse of this bee-file. -SRCURL[0]="https://www.x.org/releases/individual/proto/xproto-${PKGVERSION}.tar.bz2" +SRCURL[0]="https://www.x.org/archive/individual/proto/xorgproto-${PKGVERSION}.tar.bz2" ############################################################################### ## Add URLs/pathes to patch files to the PATCHURL array. @@ -24,8 +24,8 @@ SRCURL[0]="https://www.x.org/releases/individual/proto/xproto-${PKGVERSION}.tar. # EXCLUDE+=() ############################################################################### -## Uncomment the next statement, if the software may not be able to be build -## outside the source directory and need to be build inside the source +## Uncomment the next statement, if the software may not be able to be built +## outside the source directory and needs to be built inside the source ## directory. # build_in_sourcedir @@ -73,7 +73,7 @@ SRCURL[0]="https://www.x.org/releases/individual/proto/xproto-${PKGVERSION}.tar. ## The name of this bee-file should follow the following naming convention: ## pkgname-pkgversion-pkgrevision.bee ## -## You may remove all comments as long as SRCURL[0]="" is set. +## You may remove all comments as long as SRCURL[0] is set. ## ## Everything in this file will be executed in a bash environment. ##