Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
	net/bridge/br_multicast.c
	net/ipv6/sit.c

The conflicts were minor:

1) sit.c changes overlap with change to ip_tunnel_xmit() signature.

2) br_multicast.c had an overlap between computing max_delay using
   msecs_to_jiffies and turning MLDV2_MRC() into an inline function
   with a name using lowercase instead of uppercase letters.

3) stmmac had two overlapping changes, one which conditionally allocated
   and hooked up a dma_cfg based upon the presence of the pbl OF property,
   and another one handling store-and-forward DMA made.  The latter of
   which should not go into the new of_find_property() basic block.

Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -6067,7 +6067,7 @@ M:	Rob Herring <rob.herring@calxeda.com>
 M:	Pawel Moll <pawel.moll@arm.com>
 M:	Mark Rutland <mark.rutland@arm.com>
 M:	Stephen Warren <swarren@wwwdotorg.org>
-M:	Ian Campbell <ian.campbell@citrix.com>
+M:	Ian Campbell <ijc+devicetree@hellion.org.uk>
 L:	devicetree@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Linux for Workgroups
 
 # *DOCUMENTATION*

arch/arc/lib/strchr-700.S

@@ -39,9 +39,18 @@ ARC_ENTRY strchr
 	ld.a	r2,[r0,4]
 	sub	r12,r6,r7
 	bic	r12,r12,r6
+#ifdef __LITTLE_ENDIAN__
 	and	r7,r12,r4
 	breq	r7,0,.Loop ; For speed, we want this branch to be unaligned.
 	b	.Lfound_char ; Likewise this one.
+#else
+	and	r12,r12,r4
+	breq	r12,0,.Loop ; For speed, we want this branch to be unaligned.
+	lsr_s	r12,r12,7
+	bic 	r2,r7,r6
+	b.d	.Lfound_char_b
+	and_s	r2,r2,r12
+#endif
 ; /* We require this code address to be unaligned for speed...  */
 .Laligned:
 	ld_s	r2,[r0]
@@ -95,6 +104,7 @@ ARC_ENTRY strchr
 	lsr	r7,r7,7
 
 	bic	r2,r7,r6
+.Lfound_char_b:
 	norm	r2,r2
 	sub_s	r0,r0,4
 	asr_s	r2,r2,3

arch/arm/kernel/fiq.c

@@ -89,7 +89,8 @@ void set_fiq_handler(void *start, unsigned int length)
 
 	memcpy(base + offset, start, length);
 	if (!cache_is_vipt_nonaliasing())
-		flush_icache_range(base + offset, offset + length);
+		flush_icache_range((unsigned long)base + offset, offset +
+				   length);
 	flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length);
 }
 

arch/arm/kernel/machine_kexec.c

@@ -82,6 +82,7 @@ void machine_crash_nonpanic_core(void *unused)
 	crash_save_cpu(&regs, smp_processor_id());
 	flush_cache_all();
 
+	set_cpu_online(smp_processor_id(), false);
 	atomic_dec(&waiting_for_crash_ipi);
 	while (1)
 		cpu_relax();

arch/arm/mach-prima2/common.c

@@ -42,7 +42,6 @@ static const char *atlas6_dt_match[] __initdata = {
 
 DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
-	.nr_irqs	= 128,
 	.map_io         = sirfsoc_map_io,
 	.init_time	= sirfsoc_init_time,
 	.init_late	= sirfsoc_init_late,
@@ -59,7 +58,6 @@ static const char *prima2_dt_match[] __initdata = {
 
 DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
-	.nr_irqs	= 128,
 	.map_io         = sirfsoc_map_io,
 	.init_time	= sirfsoc_init_time,
 	.dma_zone_size	= SZ_256M,

arch/arm/mm/Kconfig

@@ -809,15 +809,18 @@ config KUSER_HELPERS
 	  the CPU type fitted to the system.  This permits binaries to be
 	  run on ARMv4 through to ARMv7 without modification.
 
+	  See Documentation/arm/kernel_user_helpers.txt for details.
+
 	  However, the fixed address nature of these helpers can be used
 	  by ROP (return orientated programming) authors when creating
 	  exploits.
 
 	  If all of the binaries and libraries which run on your platform
 	  are built specifically for your platform, and make no use of
-	  these helpers, then you can turn this option off.  However,
-	  when such an binary or library is run, it will receive a SIGILL
-	  signal, which will terminate the program.
+	  these helpers, then you can turn this option off to hinder
+	  such exploits. However, in that case, if a binary or library
+	  relying on those helpers is run, it will receive a SIGILL signal,
+	  which will terminate the program.
 
 	  Say N here only if you are absolutely certain that you do not
 	  need these helpers; otherwise, the safe option is to say Y.

arch/powerpc/Kconfig

@@ -979,6 +979,7 @@ config RELOCATABLE
 	  must live at a different physical address than the primary
 	  kernel.
 
+# This value must have zeroes in the bottom 60 bits otherwise lots will break
 config PAGE_OFFSET
 	hex
 	default "0xc000000000000000"

arch/powerpc/include/asm/page.h

@@ -211,9 +211,19 @@ extern long long virt_phys_offset;
 #define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + VIRT_PHYS_OFFSET))
 #define __pa(x) ((unsigned long)(x) - VIRT_PHYS_OFFSET)
 #else
+#ifdef CONFIG_PPC64
+/*
+ * gcc miscompiles (unsigned long)(&static_var) - PAGE_OFFSET
+ * with -mcmodel=medium, so we use & and | instead of - and + on 64-bit.
+ */
+#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) | PAGE_OFFSET))
+#define __pa(x) ((unsigned long)(x) & 0x0fffffffffffffffUL)
+
+#else /* 32-bit, non book E */
 #define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + PAGE_OFFSET - MEMORY_START))
 #define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + MEMORY_START)
 #endif
+#endif
 
 /*
  * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,

arch/powerpc/kernel/lparcfg.c

@@ -35,7 +35,13 @@
 #include <asm/vdso_datapage.h>
 #include <asm/vio.h>
 #include <asm/mmu.h>
+#include <asm/machdep.h>
 
+
+/*
+ * This isn't a module but we expose that to userspace
+ * via /proc so leave the definitions here
+ */
 #define MODULE_VERS "1.9"
 #define MODULE_NAME "lparcfg"
 
@@ -418,7 +424,8 @@ static void parse_em_data(struct seq_file *m)
 {
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 
-	if (plpar_hcall(H_GET_EM_PARMS, retbuf) == H_SUCCESS)
+	if (firmware_has_feature(FW_FEATURE_LPAR) &&
+	    plpar_hcall(H_GET_EM_PARMS, retbuf) == H_SUCCESS)
 		seq_printf(m, "power_mode_data=%016lx\n", retbuf[0]);
 }
 
@@ -677,7 +684,6 @@ static int lparcfg_open(struct inode *inode, struct file *file)
 }
 
 static const struct file_operations lparcfg_fops = {
-	.owner		= THIS_MODULE,
 	.read		= seq_read,
 	.write		= lparcfg_write,
 	.open		= lparcfg_open,
@@ -699,14 +705,4 @@ static int __init lparcfg_init(void)
 	}
 	return 0;
 }
-
-static void __exit lparcfg_cleanup(void)
-{
-	remove_proc_subtree("powerpc/lparcfg", NULL);
-}
-
-module_init(lparcfg_init);
-module_exit(lparcfg_cleanup);
-MODULE_DESCRIPTION("Interface for LPAR configuration data");
-MODULE_AUTHOR("Dave Engebretsen");
-MODULE_LICENSE("GPL");
+machine_device_initcall(pseries, lparcfg_init);

drivers/acpi/video.c

@@ -908,9 +908,6 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 		device->cap._DDC = 1;
 	}
 
-	if (acpi_video_init_brightness(device))
-		return;
-
 	if (acpi_video_backlight_support()) {
 		struct backlight_properties props;
 		struct pci_dev *pdev;
@@ -920,6 +917,9 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 		static int count = 0;
 		char *name;
 
+		result = acpi_video_init_brightness(device);
+		if (result)
+			return;
 		name = kasprintf(GFP_KERNEL, "acpi_video%d", count);
 		if (!name)
 			return;
@@ -979,11 +979,6 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 		if (result)
 			printk(KERN_ERR PREFIX "Create sysfs link\n");
 
-	} else {
-		/* Remove the brightness object. */
-		kfree(device->brightness->levels);
-		kfree(device->brightness);
-		device->brightness = NULL;
 	}
 }
 

drivers/ata/libata-pmp.c

@@ -289,24 +289,24 @@ static int sata_pmp_configure(struct ata_device *dev, int print_info)
 
 	/* Disable sending Early R_OK.
 	 * With "cached read" HDD testing and multiple ports busy on a SATA
-	 * host controller, 3726 PMP will very rarely drop a deferred
+	 * host controller, 3x26 PMP will very rarely drop a deferred
 	 * R_OK that was intended for the host. Symptom will be all
 	 * 5 drives under test will timeout, get reset, and recover.
 	 */
-	if (vendor == 0x1095 && devid == 0x3726) {
+	if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) {
 		u32 reg;
 
 		err_mask = sata_pmp_read(&ap->link, PMP_GSCR_SII_POL, &reg);
 		if (err_mask) {
 			rc = -EIO;
-			reason = "failed to read Sil3726 Private Register";
+			reason = "failed to read Sil3x26 Private Register";
 			goto fail;
 		}
 		reg &= ~0x1;
 		err_mask = sata_pmp_write(&ap->link, PMP_GSCR_SII_POL, reg);
 		if (err_mask) {
 			rc = -EIO;
-			reason = "failed to write Sil3726 Private Register";
+			reason = "failed to write Sil3x26 Private Register";
 			goto fail;
 		}
 	}
@@ -383,8 +383,8 @@ static void sata_pmp_quirks(struct ata_port *ap)
 	u16 devid = sata_pmp_gscr_devid(gscr);
 	struct ata_link *link;
 
-	if (vendor == 0x1095 && devid == 0x3726) {
-		/* sil3726 quirks */
+	if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) {
+		/* sil3x26 quirks */
 		ata_for_each_link(link, ap, EDGE) {
 			/* link reports offline after LPM */
 			link->flags |= ATA_LFLAG_NO_LPM;

drivers/ata/sata_fsl.c

@@ -293,6 +293,7 @@ static void fsl_sata_set_irq_coalescing(struct ata_host *host,
 {
 	struct sata_fsl_host_priv *host_priv = host->private_data;
 	void __iomem *hcr_base = host_priv->hcr_base;
+	unsigned long flags;
 
 	if (count > ICC_MAX_INT_COUNT_THRESHOLD)
 		count = ICC_MAX_INT_COUNT_THRESHOLD;
@@ -305,12 +306,12 @@ static void fsl_sata_set_irq_coalescing(struct ata_host *host,
 			(count > ICC_MIN_INT_COUNT_THRESHOLD))
 		ticks = ICC_SAFE_INT_TICKS;
 
-	spin_lock(&host->lock);
+	spin_lock_irqsave(&host->lock, flags);
 	iowrite32((count << 24 | ticks), hcr_base + ICC);
 
 	intr_coalescing_count = count;
 	intr_coalescing_ticks = ticks;
-	spin_unlock(&host->lock);
+	spin_unlock_irqrestore(&host->lock, flags);
 
 	DPRINTK("interrupt coalescing, count = 0x%x, ticks = %x\n",
 			intr_coalescing_count, intr_coalescing_ticks);

drivers/ata/sata_highbank.c

@@ -86,11 +86,11 @@ struct ecx_plat_data {
 
 #define SGPIO_SIGNALS			3
 #define ECX_ACTIVITY_BITS		0x300000
-#define ECX_ACTIVITY_SHIFT		2
+#define ECX_ACTIVITY_SHIFT		0
 #define ECX_LOCATE_BITS			0x80000
 #define ECX_LOCATE_SHIFT		1
 #define ECX_FAULT_BITS			0x400000
-#define ECX_FAULT_SHIFT			0
+#define ECX_FAULT_SHIFT			2
 static inline int sgpio_bit_shift(struct ecx_plat_data *pdata, u32 port,
 				u32 shift)
 {

drivers/base/memory.c

@@ -141,6 +141,8 @@ static ssize_t show_mem_removable(struct device *dev,
 		container_of(dev, struct memory_block, dev);
 
 	for (i = 0; i < sections_per_block; i++) {
+		if (!present_section_nr(mem->start_section_nr + i))
+			continue;
 		pfn = section_nr_to_pfn(mem->start_section_nr + i);
 		ret &= is_mem_section_removable(pfn, PAGES_PER_SECTION);
 	}

drivers/base/regmap/regcache-rbtree.c

@@ -332,7 +332,7 @@ regcache_rbtree_node_alloc(struct regmap *map, unsigned int reg)
 	}
 
 	if (!rbnode->blklen) {
-		rbnode->blklen = sizeof(*rbnode);
+		rbnode->blklen = 1;
 		rbnode->base_reg = reg;
 	}
 

drivers/gpu/drm/gma500/psb_intel_sdvo.c

@@ -500,7 +500,8 @@ static bool psb_intel_sdvo_read_response(struct psb_intel_sdvo *psb_intel_sdvo,
 				  &status))
 		goto log_fail;
 
-	while (status == SDVO_CMD_STATUS_PENDING && retry--) {
+	while ((status == SDVO_CMD_STATUS_PENDING ||
+		status == SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED) && retry--) {
 		udelay(15);
 		if (!psb_intel_sdvo_read_byte(psb_intel_sdvo,
 					  SDVO_I2C_CMD_STATUS,

drivers/gpu/drm/i915/i915_reg.h

@@ -752,6 +752,8 @@
 					will not assert AGPBUSY# and will only
 					be delivered when out of C3. */
 #define   INSTPM_FORCE_ORDERING				(1<<7) /* GEN6+ */
+#define   INSTPM_TLB_INVALIDATE	(1<<9)
+#define   INSTPM_SYNC_FLUSH	(1<<5)
 #define ACTHD	        0x020c8
 #define FW_BLC		0x020d8
 #define FW_BLC2		0x020dc
@@ -4438,7 +4440,7 @@
 #define EDP_LINK_TRAIN_600MV_0DB_IVB		(0x30 <<22)
 #define EDP_LINK_TRAIN_600MV_3_5DB_IVB		(0x36 <<22)
 #define EDP_LINK_TRAIN_800MV_0DB_IVB		(0x38 <<22)
-#define EDP_LINK_TRAIN_800MV_3_5DB_IVB		(0x33 <<22)
+#define EDP_LINK_TRAIN_800MV_3_5DB_IVB		(0x3e <<22)
 
 /* legacy values */
 #define EDP_LINK_TRAIN_500MV_0DB_IVB		(0x00 <<22)

drivers/gpu/drm/i915/intel_ringbuffer.c

@@ -968,6 +968,18 @@ void intel_ring_setup_status_page(struct intel_ring_buffer *ring)
 
 	I915_WRITE(mmio, (u32)ring->status_page.gfx_addr);
 	POSTING_READ(mmio);
+
+	/* Flush the TLB for this page */
+	if (INTEL_INFO(dev)->gen >= 6) {
+		u32 reg = RING_INSTPM(ring->mmio_base);
+		I915_WRITE(reg,
+			   _MASKED_BIT_ENABLE(INSTPM_TLB_INVALIDATE |
+					      INSTPM_SYNC_FLUSH));
+		if (wait_for((I915_READ(reg) & INSTPM_SYNC_FLUSH) == 0,
+			     1000))
+			DRM_ERROR("%s: wait for SyncFlush to complete for TLB invalidation timed out\n",
+				  ring->name);
+	}
 }
 
 static int

drivers/gpu/drm/nouveau/core/core/mm.c

@@ -98,6 +98,8 @@ nouveau_mm_head(struct nouveau_mm *mm, u8 type, u32 size_max, u32 size_min,
 	u32 splitoff;
 	u32 s, e;
 
+	BUG_ON(!type);
+
 	list_for_each_entry(this, &mm->free, fl_entry) {
 		e = this->offset + this->length;
 		s = this->offset;
@@ -162,6 +164,8 @@ nouveau_mm_tail(struct nouveau_mm *mm, u8 type, u32 size_max, u32 size_min,
 	struct nouveau_mm_node *prev, *this, *next;
 	u32 mask = align - 1;
 
+	BUG_ON(!type);
+
 	list_for_each_entry_reverse(this, &mm->free, fl_entry) {
 		u32 e = this->offset + this->length;
 		u32 s = this->offset;

drivers/gpu/drm/nouveau/core/include/subdev/mc.h

@@ -20,8 +20,8 @@ nouveau_mc(void *obj)
 	return (void *)nv_device(obj)->subdev[NVDEV_SUBDEV_MC];
 }
 
-#define nouveau_mc_create(p,e,o,d)                                             \
-	nouveau_mc_create_((p), (e), (o), sizeof(**d), (void **)d)
+#define nouveau_mc_create(p,e,o,m,d)                                           \
+	nouveau_mc_create_((p), (e), (o), (m), sizeof(**d), (void **)d)
 #define nouveau_mc_destroy(p) ({                                               \
 	struct nouveau_mc *pmc = (p); _nouveau_mc_dtor(nv_object(pmc));        \
 })
@@ -33,7 +33,8 @@ nouveau_mc(void *obj)
 })
 
 int  nouveau_mc_create_(struct nouveau_object *, struct nouveau_object *,
-			struct nouveau_oclass *, int, void **);
+			struct nouveau_oclass *, const struct nouveau_mc_intr *,
+			int, void **);
 void _nouveau_mc_dtor(struct nouveau_object *);
 int  _nouveau_mc_init(struct nouveau_object *);
 int  _nouveau_mc_fini(struct nouveau_object *, bool);