From 14d2b7c1a96ef37eb571599c73d4a1a606b964d6 Mon Sep 17 00:00:00 2001 From: Lucas Stach <l.stach@pengutronix.de> Date: Mon, 3 Aug 2015 17:50:11 +0200 Subject: [PATCH] net: fec: fix initial runtime PM refcount MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The clocks are initially active and thus the device is marked active. This still keeps the PM refcount at 0, the pm_runtime_put_autosuspend() call at the end of probe then leaves us with an invalid refcount of -1, which in turn leads to the device staying in suspended state even though netdev open had been called. Fix this by initializing the refcount to be coherent with the initial device status. Fixes: 8fff755e9f8 (net: fec: Ensure clocks are enabled while using mdio bus) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> --- drivers/net/ethernet/freescale/fec_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 32e3807c650ea..271bb5862346e 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3433,6 +3433,7 @@ fec_probe(struct platform_device *pdev) pm_runtime_set_autosuspend_delay(&pdev->dev, FEC_MDIO_PM_TIMEOUT); pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev);