From 0e6dfac5f2c4e54ccbfbb46d69c0fe0dba857a6f Mon Sep 17 00:00:00 2001
From: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Date: Thu, 28 Nov 2024 17:54:05 +0200
Subject: [PATCH 01/23] Bluetooth: iso: Allow BIG re-sync

A Broadcast Sink might require BIG sync to be terminated and
re-established multiple times, while keeping the same PA sync
handle active. This can be possible if the configuration of the
listening (PA sync) socket is reset once all bound BISes are
established and accepted by the user space:

1. The DEFER setup flag needs to be reset on the parent socket,
to allow another BIG create sync procedure to be started on socket
read.

2. The BT_SK_BIG_SYNC flag needs to be cleared on the parent socket,
to allow another BIG create sync command to be sent.

3. The socket state needs to transition from BT_LISTEN to BT_CONNECTED,
to mark that the listening process has completed and another one can
be started if needed.

Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 net/bluetooth/iso.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c
index 43d0ebe111000..44acddf58a0cd 100644
--- a/net/bluetooth/iso.c
+++ b/net/bluetooth/iso.c
@@ -1281,6 +1281,42 @@ static int iso_sock_accept(struct socket *sock, struct socket *newsock,
 
 	BT_DBG("new socket %p", ch);
 
+	/* A Broadcast Sink might require BIG sync to be terminated
+	 * and re-established multiple times, while keeping the same
+	 * PA sync handle active. To allow this, once all BIS
+	 * connections have been accepted on a PA sync parent socket,
+	 * "reset" socket state, to allow future BIG re-sync procedures.
+	 */
+	if (test_bit(BT_SK_PA_SYNC, &iso_pi(sk)->flags)) {
+		/* Iterate through the list of bound BIS indices
+		 * and clear each BIS as they are accepted by the
+		 * user space, one by one.
+		 */
+		for (int i = 0; i < iso_pi(sk)->bc_num_bis; i++) {
+			if (iso_pi(sk)->bc_bis[i] > 0) {
+				iso_pi(sk)->bc_bis[i] = 0;
+				iso_pi(sk)->bc_num_bis--;
+				break;
+			}
+		}
+
+		if (iso_pi(sk)->bc_num_bis == 0) {
+			/* Once the last BIS was accepted, reset parent
+			 * socket parameters to mark that the listening
+			 * process for BIS connections has been completed:
+			 *
+			 * 1. Reset the DEFER setup flag on the parent sk.
+			 * 2. Clear the flag marking that the BIG create
+			 *    sync command is pending.
+			 * 3. Transition socket state from BT_LISTEN to
+			 *    BT_CONNECTED.
+			 */
+			set_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags);
+			clear_bit(BT_SK_BIG_SYNC, &iso_pi(sk)->flags);
+			sk->sk_state = BT_CONNECTED;
+		}
+	}
+
 done:
 	release_sock(sk);
 	return err;

From e209e5ccc5ac4b2637159ea19be95a1b16846f31 Mon Sep 17 00:00:00 2001
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Mon, 25 Nov 2024 15:42:11 -0500
Subject: [PATCH 02/23] Bluetooth: MGMT: Mark LL Privacy as stable

This marks LL Privacy as stable by removing its experimental UUID and
move its functionality to Device Flag (HCI_CONN_FLAG_ADDRESS_RESOLUTION)
which can be set by MGMT Device Set Flags so userspace retain control of
the feature.

Link: https://github.com/bluez/bluez/issues/1028
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 include/net/bluetooth/hci.h      |   1 -
 include/net/bluetooth/hci_core.h |  11 +--
 net/bluetooth/hci_sync.c         |  52 +++++++-----
 net/bluetooth/mgmt.c             | 133 +------------------------------
 4 files changed, 35 insertions(+), 162 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 6203bd8663b74..0d51970d809fd 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -438,7 +438,6 @@ enum {
 	HCI_FORCE_BREDR_SMP,
 	HCI_FORCE_STATIC_ADDR,
 	HCI_LL_RPA_RESOLUTION,
-	HCI_ENABLE_LL_PRIVACY,
 	HCI_CMD_PENDING,
 	HCI_FORCE_NO_MITM,
 	HCI_QUALITY_REPORT,
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index ca22ead85dbe0..734cd50cdc465 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -157,8 +157,9 @@ struct bdaddr_list_with_irk {
 
 /* Bitmask of connection flags */
 enum hci_conn_flags {
-	HCI_CONN_FLAG_REMOTE_WAKEUP = 1,
-	HCI_CONN_FLAG_DEVICE_PRIVACY = 2,
+	HCI_CONN_FLAG_REMOTE_WAKEUP = BIT(0),
+	HCI_CONN_FLAG_DEVICE_PRIVACY = BIT(1),
+	HCI_CONN_FLAG_ADDRESS_RESOLUTION = BIT(2),
 };
 typedef u8 hci_conn_flags_t;
 
@@ -1919,11 +1920,7 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
 
 #define ll_privacy_capable(dev) ((dev)->le_features[0] & HCI_LE_LL_PRIVACY)
 
-/* Use LL Privacy based address resolution if supported */
-#define use_ll_privacy(dev) (ll_privacy_capable(dev) && \
-			     hci_dev_test_flag(dev, HCI_ENABLE_LL_PRIVACY))
-
-#define privacy_mode_capable(dev) (use_ll_privacy(dev) && \
+#define privacy_mode_capable(dev) (ll_privacy_capable(dev) && \
 				   (hdev->commands[39] & 0x04))
 
 #define read_key_size_capable(dev) \
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 7b2b04d6b8563..0badec7120ab3 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -1066,7 +1066,7 @@ int hci_update_random_address_sync(struct hci_dev *hdev, bool require_privacy,
 		/* If Controller supports LL Privacy use own address type is
 		 * 0x03
 		 */
-		if (use_ll_privacy(hdev))
+		if (ll_privacy_capable(hdev))
 			*own_addr_type = ADDR_LE_DEV_RANDOM_RESOLVED;
 		else
 			*own_addr_type = ADDR_LE_DEV_RANDOM;
@@ -2162,7 +2162,7 @@ static int hci_le_set_scan_enable_sync(struct hci_dev *hdev, u8 val,
 
 static int hci_le_set_addr_resolution_enable_sync(struct hci_dev *hdev, u8 val)
 {
-	if (!use_ll_privacy(hdev))
+	if (!ll_privacy_capable(hdev))
 		return 0;
 
 	/* If controller is not/already resolving we are done. */
@@ -2254,7 +2254,7 @@ static int hci_le_del_resolve_list_sync(struct hci_dev *hdev,
 	struct hci_cp_le_del_from_resolv_list cp;
 	struct bdaddr_list_with_irk *entry;
 
-	if (!use_ll_privacy(hdev))
+	if (!ll_privacy_capable(hdev))
 		return 0;
 
 	/* Check if the IRK has been programmed */
@@ -2319,7 +2319,7 @@ static int hci_le_add_resolve_list_sync(struct hci_dev *hdev,
 	struct bdaddr_list_with_irk *entry;
 	struct hci_conn_params *p;
 
-	if (!use_ll_privacy(hdev))
+	if (!ll_privacy_capable(hdev))
 		return 0;
 
 	/* Attempt to program local identity address, type and irk if params is
@@ -2332,7 +2332,8 @@ static int hci_le_add_resolve_list_sync(struct hci_dev *hdev,
 		hci_copy_identity_address(hdev, &cp.bdaddr, &cp.bdaddr_type);
 		memcpy(cp.peer_irk, hdev->irk, 16);
 		goto done;
-	}
+	} else if (!(params->flags & HCI_CONN_FLAG_ADDRESS_RESOLUTION))
+		return 0;
 
 	irk = hci_find_irk_by_addr(hdev, &params->addr, params->addr_type);
 	if (!irk)
@@ -2379,6 +2380,10 @@ static int hci_le_set_privacy_mode_sync(struct hci_dev *hdev,
 	struct hci_cp_le_set_privacy_mode cp;
 	struct smp_irk *irk;
 
+	if (!ll_privacy_capable(hdev) ||
+	    !(params->flags & HCI_CONN_FLAG_ADDRESS_RESOLUTION))
+		return 0;
+
 	/* If device privacy mode has already been set there is nothing to do */
 	if (params->privacy_mode == HCI_DEVICE_PRIVACY)
 		return 0;
@@ -2428,11 +2433,6 @@ static int hci_le_add_accept_list_sync(struct hci_dev *hdev,
 	if (*num_entries >= hdev->le_accept_list_size)
 		return -ENOSPC;
 
-	/* Accept list can not be used with RPAs */
-	if (!use_ll_privacy(hdev) &&
-	    hci_find_irk_by_addr(hdev, &params->addr, params->addr_type))
-		return -EINVAL;
-
 	/* Attempt to program the device in the resolving list first to avoid
 	 * having to rollback in case it fails since the resolving list is
 	 * dynamic it can probably be smaller than the accept list.
@@ -2567,7 +2567,7 @@ static int hci_pause_addr_resolution(struct hci_dev *hdev)
 {
 	int err;
 
-	if (!use_ll_privacy(hdev))
+	if (!ll_privacy_capable(hdev))
 		return 0;
 
 	if (!hci_dev_test_flag(hdev, HCI_LL_RPA_RESOLUTION))
@@ -2671,12 +2671,12 @@ static int hci_le_clear_accept_list_sync(struct hci_dev *hdev)
  *
  * Update is done using the following sequence:
  *
- * use_ll_privacy((Disable Advertising) -> Disable Resolving List) ->
+ * ll_privacy_capable((Disable Advertising) -> Disable Resolving List) ->
  * Remove Devices From Accept List ->
- * (has IRK && use_ll_privacy(Remove Devices From Resolving List))->
+ * (has IRK && ll_privacy_capable(Remove Devices From Resolving List))->
  * Add Devices to Accept List ->
- * (has IRK && use_ll_privacy(Remove Devices From Resolving List)) ->
- * use_ll_privacy(Enable Resolving List -> (Enable Advertising)) ->
+ * (has IRK && ll_privacy_capable(Remove Devices From Resolving List)) ->
+ * ll_privacy_capable(Enable Resolving List -> (Enable Advertising)) ->
  * Enable Scanning
  *
  * In case of failure advertising shall be restored to its original state and
@@ -2697,7 +2697,7 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
 	/* Pause advertising if resolving list can be used as controllers
 	 * cannot accept resolving list modifications while advertising.
 	 */
-	if (use_ll_privacy(hdev)) {
+	if (ll_privacy_capable(hdev)) {
 		err = hci_pause_advertising_sync(hdev);
 		if (err) {
 			bt_dev_err(hdev, "pause advertising failed: %d", err);
@@ -2842,7 +2842,7 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
 		bt_dev_err(hdev, "Unable to enable LL privacy: %d", err);
 
 	/* Resume advertising if it was paused */
-	if (use_ll_privacy(hdev))
+	if (ll_privacy_capable(hdev))
 		hci_resume_advertising_sync(hdev);
 
 	/* Select filter policy to use accept list */
@@ -3100,7 +3100,7 @@ static int hci_passive_scan_sync(struct hci_dev *hdev)
  * If there are devices to scan:
  *
  * Disable Scanning -> Update Accept List ->
- * use_ll_privacy((Disable Advertising) -> Disable Resolving List ->
+ * ll_privacy_capable((Disable Advertising) -> Disable Resolving List ->
  * Update Resolving List -> Enable Resolving List -> (Enable Advertising)) ->
  * Enable Scanning
  *
@@ -3454,7 +3454,7 @@ int hci_update_name_sync(struct hci_dev *hdev)
  *
  * HCI_SSP_ENABLED(Enable SSP)
  * HCI_LE_ENABLED(Enable LE)
- * HCI_LE_ENABLED(use_ll_privacy(Add local IRK to Resolving List) ->
+ * HCI_LE_ENABLED(ll_privacy_capable(Add local IRK to Resolving List) ->
  * Update adv data)
  * Enable Authentication
  * lmp_bredr_capable(Set Fast Connectable -> Set Scan Type -> Set Class ->
@@ -4229,6 +4229,14 @@ static int hci_le_set_event_mask_sync(struct hci_dev *hdev)
 	if (use_enhanced_conn_complete(hdev))
 		events[1] |= 0x02;	/* LE Enhanced Connection Complete */
 
+	/* Mark Device Privacy if Privacy Mode is supported */
+	if (privacy_mode_capable(hdev))
+		hdev->conn_flags |= HCI_CONN_FLAG_DEVICE_PRIVACY;
+
+	/* Mark Address Resolution if LL Privacy is supported */
+	if (ll_privacy_capable(hdev))
+		hdev->conn_flags |= HCI_CONN_FLAG_ADDRESS_RESOLUTION;
+
 	/* If the controller supports Extended Scanner Filter
 	 * Policies, enable the corresponding event.
 	 */
@@ -5385,7 +5393,7 @@ int hci_stop_discovery_sync(struct hci_dev *hdev)
 	}
 
 	/* Resume advertising if it was paused */
-	if (use_ll_privacy(hdev))
+	if (ll_privacy_capable(hdev))
 		hci_resume_advertising_sync(hdev);
 
 	/* No further actions needed for LE-only discovery */
@@ -5897,7 +5905,7 @@ static int hci_active_scan_sync(struct hci_dev *hdev, uint16_t interval)
 
 failed:
 	/* Resume advertising if it was paused */
-	if (use_ll_privacy(hdev))
+	if (ll_privacy_capable(hdev))
 		hci_resume_advertising_sync(hdev);
 
 	/* Resume passive scanning */
@@ -6673,7 +6681,7 @@ int hci_get_random_address(struct hci_dev *hdev, bool require_privacy,
 		/* If Controller supports LL Privacy use own address type is
 		 * 0x03
 		 */
-		if (use_ll_privacy(hdev))
+		if (ll_privacy_capable(hdev))
 			*own_addr_type = ADDR_LE_DEV_RANDOM_RESOLVED;
 		else
 			*own_addr_type = ADDR_LE_DEV_RANDOM;
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index de47ad999d7b6..5e46f37644406 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -4417,12 +4417,6 @@ static const u8 le_simultaneous_roles_uuid[16] = {
 	0x96, 0x46, 0xc0, 0x42, 0xb5, 0x10, 0x1b, 0x67,
 };
 
-/* 15c0a148-c273-11ea-b3de-0242ac130004 */
-static const u8 rpa_resolution_uuid[16] = {
-	0x04, 0x00, 0x13, 0xac, 0x42, 0x02, 0xde, 0xb3,
-	0xea, 0x11, 0x73, 0xc2, 0x48, 0xa1, 0xc0, 0x15,
-};
-
 /* 6fbaf188-05e0-496a-9885-d6ddfdb4e03e */
 static const u8 iso_socket_uuid[16] = {
 	0x3e, 0xe0, 0xb4, 0xfd, 0xdd, 0xd6, 0x85, 0x98,
@@ -4473,17 +4467,6 @@ static int read_exp_features_info(struct sock *sk, struct hci_dev *hdev,
 		idx++;
 	}
 
-	if (hdev && ll_privacy_capable(hdev)) {
-		if (hci_dev_test_flag(hdev, HCI_ENABLE_LL_PRIVACY))
-			flags = BIT(0) | BIT(1);
-		else
-			flags = BIT(1);
-
-		memcpy(rp->features[idx].uuid, rpa_resolution_uuid, 16);
-		rp->features[idx].flags = cpu_to_le32(flags);
-		idx++;
-	}
-
 	if (hdev && (aosp_has_quality_report(hdev) ||
 		     hdev->set_quality_report)) {
 		if (hci_dev_test_flag(hdev, HCI_QUALITY_REPORT))
@@ -4540,27 +4523,6 @@ static int read_exp_features_info(struct sock *sk, struct hci_dev *hdev,
 	return status;
 }
 
-static int exp_ll_privacy_feature_changed(bool enabled, struct hci_dev *hdev,
-					  struct sock *skip)
-{
-	struct mgmt_ev_exp_feature_changed ev;
-
-	memset(&ev, 0, sizeof(ev));
-	memcpy(ev.uuid, rpa_resolution_uuid, 16);
-	ev.flags = cpu_to_le32((enabled ? BIT(0) : 0) | BIT(1));
-
-	// Do we need to be atomic with the conn_flags?
-	if (enabled && privacy_mode_capable(hdev))
-		hdev->conn_flags |= HCI_CONN_FLAG_DEVICE_PRIVACY;
-	else
-		hdev->conn_flags &= ~HCI_CONN_FLAG_DEVICE_PRIVACY;
-
-	return mgmt_limited_event(MGMT_EV_EXP_FEATURE_CHANGED, hdev,
-				  &ev, sizeof(ev),
-				  HCI_MGMT_EXP_FEATURE_EVENTS, skip);
-
-}
-
 static int exp_feature_changed(struct hci_dev *hdev, const u8 *uuid,
 			       bool enabled, struct sock *skip)
 {
@@ -4601,16 +4563,6 @@ static int set_zero_key_func(struct sock *sk, struct hci_dev *hdev,
 	}
 #endif
 
-	if (hdev && use_ll_privacy(hdev) && !hdev_is_powered(hdev)) {
-		bool changed;
-
-		changed = hci_dev_test_and_clear_flag(hdev,
-						      HCI_ENABLE_LL_PRIVACY);
-		if (changed)
-			exp_feature_changed(hdev, rpa_resolution_uuid, false,
-					    sk);
-	}
-
 	hci_sock_set_flag(sk, HCI_MGMT_EXP_FEATURE_EVENTS);
 
 	return mgmt_cmd_complete(sk, hdev ? hdev->id : MGMT_INDEX_NONE,
@@ -4716,71 +4668,6 @@ static int set_mgmt_mesh_func(struct sock *sk, struct hci_dev *hdev,
 	return err;
 }
 
-static int set_rpa_resolution_func(struct sock *sk, struct hci_dev *hdev,
-				   struct mgmt_cp_set_exp_feature *cp,
-				   u16 data_len)
-{
-	struct mgmt_rp_set_exp_feature rp;
-	bool val, changed;
-	int err;
-	u32 flags;
-
-	/* Command requires to use the controller index */
-	if (!hdev)
-		return mgmt_cmd_status(sk, MGMT_INDEX_NONE,
-				       MGMT_OP_SET_EXP_FEATURE,
-				       MGMT_STATUS_INVALID_INDEX);
-
-	/* Changes can only be made when controller is powered down */
-	if (hdev_is_powered(hdev))
-		return mgmt_cmd_status(sk, hdev->id,
-				       MGMT_OP_SET_EXP_FEATURE,
-				       MGMT_STATUS_REJECTED);
-
-	/* Parameters are limited to a single octet */
-	if (data_len != MGMT_SET_EXP_FEATURE_SIZE + 1)
-		return mgmt_cmd_status(sk, hdev->id,
-				       MGMT_OP_SET_EXP_FEATURE,
-				       MGMT_STATUS_INVALID_PARAMS);
-
-	/* Only boolean on/off is supported */
-	if (cp->param[0] != 0x00 && cp->param[0] != 0x01)
-		return mgmt_cmd_status(sk, hdev->id,
-				       MGMT_OP_SET_EXP_FEATURE,
-				       MGMT_STATUS_INVALID_PARAMS);
-
-	val = !!cp->param[0];
-
-	if (val) {
-		changed = !hci_dev_test_and_set_flag(hdev,
-						     HCI_ENABLE_LL_PRIVACY);
-		hci_dev_clear_flag(hdev, HCI_ADVERTISING);
-
-		/* Enable LL privacy + supported settings changed */
-		flags = BIT(0) | BIT(1);
-	} else {
-		changed = hci_dev_test_and_clear_flag(hdev,
-						      HCI_ENABLE_LL_PRIVACY);
-
-		/* Disable LL privacy + supported settings changed */
-		flags = BIT(1);
-	}
-
-	memcpy(rp.uuid, rpa_resolution_uuid, 16);
-	rp.flags = cpu_to_le32(flags);
-
-	hci_sock_set_flag(sk, HCI_MGMT_EXP_FEATURE_EVENTS);
-
-	err = mgmt_cmd_complete(sk, hdev->id,
-				MGMT_OP_SET_EXP_FEATURE, 0,
-				&rp, sizeof(rp));
-
-	if (changed)
-		exp_ll_privacy_feature_changed(val, hdev, sk);
-
-	return err;
-}
-
 static int set_quality_report_func(struct sock *sk, struct hci_dev *hdev,
 				   struct mgmt_cp_set_exp_feature *cp,
 				   u16 data_len)
@@ -5032,7 +4919,6 @@ static const struct mgmt_exp_feature {
 	EXP_FEAT(debug_uuid, set_debug_func),
 #endif
 	EXP_FEAT(mgmt_mesh_uuid, set_mgmt_mesh_func),
-	EXP_FEAT(rpa_resolution_uuid, set_rpa_resolution_func),
 	EXP_FEAT(quality_report_uuid, set_quality_report_func),
 	EXP_FEAT(offload_codecs_uuid, set_offload_codec_func),
 	EXP_FEAT(le_simultaneous_roles_uuid, set_le_simultaneous_roles_func),
@@ -5062,22 +4948,6 @@ static int set_exp_feature(struct sock *sk, struct hci_dev *hdev,
 			       MGMT_STATUS_NOT_SUPPORTED);
 }
 
-static u32 get_params_flags(struct hci_dev *hdev,
-			    struct hci_conn_params *params)
-{
-	u32 flags = hdev->conn_flags;
-
-	/* Devices using RPAs can only be programmed in the acceptlist if
-	 * LL Privacy has been enable otherwise they cannot mark
-	 * HCI_CONN_FLAG_REMOTE_WAKEUP.
-	 */
-	if ((flags & HCI_CONN_FLAG_REMOTE_WAKEUP) && !use_ll_privacy(hdev) &&
-	    hci_find_irk_by_addr(hdev, &params->addr, params->addr_type))
-		flags &= ~HCI_CONN_FLAG_REMOTE_WAKEUP;
-
-	return flags;
-}
-
 static int get_device_flags(struct sock *sk, struct hci_dev *hdev, void *data,
 			    u16 data_len)
 {
@@ -5112,7 +4982,6 @@ static int get_device_flags(struct sock *sk, struct hci_dev *hdev, void *data,
 		if (!params)
 			goto done;
 
-		supported_flags = get_params_flags(hdev, params);
 		current_flags = params->flags;
 	}
 
@@ -5192,7 +5061,7 @@ static int set_device_flags(struct sock *sk, struct hci_dev *hdev, void *data,
 		goto unlock;
 	}
 
-	supported_flags = get_params_flags(hdev, params);
+	supported_flags = hdev->conn_flags;
 
 	if ((supported_flags | current_flags) != supported_flags) {
 		bt_dev_warn(hdev, "Bad flag given (0x%x) vs supported (0x%0x)",

From b05ce8896091233fb0e4bf506862abaebdd8945b Mon Sep 17 00:00:00 2001
From: "Dr. David Alan Gilbert" <linux@treblig.org>
Date: Mon, 16 Dec 2024 01:26:36 +0000
Subject: [PATCH 03/23] Bluetooth: hci: Remove deadcode

hci_bdaddr_list_del_with_flags() was added in 2020's
commit 8baaa4038edb ("Bluetooth: Add bdaddr_list_with_flags for classic
whitelist")
but has remained unused.

hci_remove_ext_adv_instance() was added in 2020's
commit eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS
connections")
but has remained unused.

Remove them.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 include/net/bluetooth/hci_core.h |  2 --
 include/net/bluetooth/hci_sync.h |  1 -
 net/bluetooth/hci_core.c         | 20 --------------------
 net/bluetooth/hci_sync.c         | 24 ------------------------
 4 files changed, 47 deletions(-)

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 734cd50cdc465..84b522a100192 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1760,8 +1760,6 @@ int hci_bdaddr_list_add_with_flags(struct list_head *list, bdaddr_t *bdaddr,
 int hci_bdaddr_list_del(struct list_head *list, bdaddr_t *bdaddr, u8 type);
 int hci_bdaddr_list_del_with_irk(struct list_head *list, bdaddr_t *bdaddr,
 				 u8 type);
-int hci_bdaddr_list_del_with_flags(struct list_head *list, bdaddr_t *bdaddr,
-				   u8 type);
 void hci_bdaddr_list_clear(struct list_head *list);
 
 struct hci_conn_params *hci_conn_params_lookup(struct hci_dev *hdev,
diff --git a/include/net/bluetooth/hci_sync.h b/include/net/bluetooth/hci_sync.h
index f3052cb252efd..7e2cf0cca939a 100644
--- a/include/net/bluetooth/hci_sync.h
+++ b/include/net/bluetooth/hci_sync.h
@@ -140,7 +140,6 @@ int hci_update_scan(struct hci_dev *hdev);
 int hci_write_le_host_supported_sync(struct hci_dev *hdev, u8 le, u8 simul);
 int hci_remove_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance,
 				     struct sock *sk);
-int hci_remove_ext_adv_instance(struct hci_dev *hdev, u8 instance);
 struct sk_buff *hci_read_local_oob_data_sync(struct hci_dev *hdev, bool ext,
 					     struct sock *sk);
 
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 18ab5628f85ad..ba955447b359e 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -2181,26 +2181,6 @@ int hci_bdaddr_list_del_with_irk(struct list_head *list, bdaddr_t *bdaddr,
 	return 0;
 }
 
-int hci_bdaddr_list_del_with_flags(struct list_head *list, bdaddr_t *bdaddr,
-				   u8 type)
-{
-	struct bdaddr_list_with_flags *entry;
-
-	if (!bacmp(bdaddr, BDADDR_ANY)) {
-		hci_bdaddr_list_clear(list);
-		return 0;
-	}
-
-	entry = hci_bdaddr_list_lookup_with_flags(list, bdaddr, type);
-	if (!entry)
-		return -ENOENT;
-
-	list_del(&entry->list);
-	kfree(entry);
-
-	return 0;
-}
-
 /* This function requires the caller holds hdev->lock */
 struct hci_conn_params *hci_conn_params_lookup(struct hci_dev *hdev,
 					       bdaddr_t *addr, u8 addr_type)
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 0badec7120ab3..dd770ef5ec368 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -1786,30 +1786,6 @@ int hci_remove_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance,
 					HCI_CMD_TIMEOUT, sk);
 }
 
-static int remove_ext_adv_sync(struct hci_dev *hdev, void *data)
-{
-	struct adv_info *adv = data;
-	u8 instance = 0;
-
-	if (adv)
-		instance = adv->instance;
-
-	return hci_remove_ext_adv_instance_sync(hdev, instance, NULL);
-}
-
-int hci_remove_ext_adv_instance(struct hci_dev *hdev, u8 instance)
-{
-	struct adv_info *adv = NULL;
-
-	if (instance) {
-		adv = hci_find_adv_instance(hdev, instance);
-		if (!adv)
-			return -EINVAL;
-	}
-
-	return hci_cmd_sync_queue(hdev, remove_ext_adv_sync, adv, NULL);
-}
-
 int hci_le_terminate_big_sync(struct hci_dev *hdev, u8 handle, u8 reason)
 {
 	struct hci_cp_le_term_big cp;

From a6587d7ed2cd8341f8a92112ac772f2c44f09824 Mon Sep 17 00:00:00 2001
From: Mark Dietzer <git@doridian.net>
Date: Thu, 12 Dec 2024 16:02:55 -0800
Subject: [PATCH 04/23] Bluetooth: btusb: Add ID 0x2c7c:0x0130 for Qualcomm
 WCN785x

Adds a new entry with VID 0x2c7c and PID 0x0130 to the btusb quirks table as it uses a Qualcomm WCN785x chipset

The device information from /sys/kernel/debug/usb/devices is provided below:
T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=05 Dev#=  7 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0130 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  65 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  65 Ivl=1ms

Signed-off-by: Mark Dietzer <git@doridian.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 279fe6c115fac..20ba8ceff7d1b 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -377,6 +377,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3623), .driver_info = BTUSB_QCA_WCN6855 |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x2c7c, 0x0130), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },

From b16b327edb4d030fb4c8fe38c7d299074d47ee3f Mon Sep 17 00:00:00 2001
From: Ying Hsu <yinghsu@chromium.org>
Date: Fri, 13 Dec 2024 12:04:22 +0800
Subject: [PATCH 05/23] Bluetooth: btusb: add sysfs attribute to control USB
 alt setting

When a Bluetooth raw socket is open, the HCI event related to SCO
connection changes are not dispatched to the hci_event module, and
the underlying Bluetooth controller's USB Interface 1 will not be
updated accordingly.

This patch adds `isoc_alt` sysfs attribute, allowing user space
to update the alternate setting of the USB interface alternate
setting as needed.

Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btusb.c | 34 +++++++++++++++++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 20ba8ceff7d1b..de0b4d99fcbf8 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3647,6 +3647,32 @@ static const struct file_operations force_poll_sync_fops = {
 	.llseek		= default_llseek,
 };
 
+static ssize_t isoc_alt_show(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	struct btusb_data *data = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%d\n", data->isoc_altsetting);
+}
+
+static ssize_t isoc_alt_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct btusb_data *data = dev_get_drvdata(dev);
+	int alt;
+	int ret;
+
+	if (kstrtoint(buf, 10, &alt))
+		return -EINVAL;
+
+	ret = btusb_switch_alt_setting(data->hdev, alt);
+	return ret < 0 ? ret : count;
+}
+
+static DEVICE_ATTR_RW(isoc_alt);
+
 static int btusb_probe(struct usb_interface *intf,
 		       const struct usb_device_id *id)
 {
@@ -4010,6 +4036,10 @@ static int btusb_probe(struct usb_interface *intf,
 						 data->isoc, data);
 		if (err < 0)
 			goto out_free_dev;
+
+		err = device_create_file(&intf->dev, &dev_attr_isoc_alt);
+		if (err)
+			goto out_free_dev;
 	}
 
 	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && data->diag) {
@@ -4056,8 +4086,10 @@ static void btusb_disconnect(struct usb_interface *intf)
 	hdev = data->hdev;
 	usb_set_intfdata(data->intf, NULL);
 
-	if (data->isoc)
+	if (data->isoc) {
+		device_remove_file(&intf->dev, &dev_attr_isoc_alt);
 		usb_set_intfdata(data->isoc, NULL);
+	}
 
 	if (data->diag)
 		usb_set_intfdata(data->diag, NULL);

From 45e7d389bf2e52dfc893779c611dd5cff461b590 Mon Sep 17 00:00:00 2001
From: Andrew Halaney <ajhalaney@gmail.com>
Date: Tue, 24 Dec 2024 14:42:11 -0600
Subject: [PATCH 06/23] Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922

A new machine has a Archer AX3000 / TX55e in it,
and out the box reported issues resetting hci0. It looks like
this is a MT7922 from the lspci output, so treat it as a MediaTek
device and use the proper callbacks. With that in place an xbox
controller can be used without issue as seen below:

    [    7.047388] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
    [    9.583883] Bluetooth: hci0: Device setup in 2582842 usecs
    [    9.583895] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
    [    9.644780] Bluetooth: hci0: AOSP extensions version v1.00
    [    9.644784] Bluetooth: hci0: AOSP quality report is supported
    [  876.379876] input: Xbox Wireless Controller as /devices/virtual/misc/uhid/0005:045E:0B13.0006/input/input27
    [  876.380215] hid-generic 0005:045E:0B13.0006: input,hidraw3: BLUETOOTH HID v5.15 Gamepad [Xbox Wireless Controller] on c0:bf:be:27:de:f7
    [  876.429368] input: Xbox Wireless Controller as /devices/virtual/misc/uhid/0005:045E:0B13.0006/input/input28
    [  876.429423] microsoft 0005:045E:0B13.0006: input,hidraw3: BLUETOOTH HID v5.15 Gamepad [Xbox Wireless Controller] on c0:bf:be:27:de:f7

lspci output:

    root@livingroom:/home/ajhalaney/git# lspci
    ...
    05:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter

and USB device:

    root@livingroom:/home/ajhalaney/git# cat /sys/kernel/debug/usb/devices
    ...
    T:  Bus=01 Lev=01 Prnt=01 Port=10 Cnt=03 Dev#=  4 Spd=480  MxCh= 0
    D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=13d3 ProdID=3610 Rev= 1.00
    S:  Manufacturer=MediaTek Inc.
    S:  Product=Wireless_Device
    S:  SerialNumber=000000000
    C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
    A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
    I:  If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
    E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
    I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
    E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: Andrew Halaney <ajhalaney@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index de0b4d99fcbf8..b1a1b6af4ce02 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -612,6 +612,8 @@ static const struct usb_device_id quirks_table[] = {
 	/* MediaTek MT7922 Bluetooth devices */
 	{ USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3610), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* MediaTek MT7922A Bluetooth devices */
 	{ USB_DEVICE(0x0489, 0xe0d8), .driver_info = BTUSB_MEDIATEK |

From f63f401130e5c5cd0dd2f18c9df967ab75cd4732 Mon Sep 17 00:00:00 2001
From: En-Wei Wu <en-wei.wu@canonical.com>
Date: Tue, 24 Dec 2024 14:35:22 +0800
Subject: [PATCH 07/23] Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925

Add VID 13d3 & PID 3628 for MediaTek MT7925 USB Bluetooth chip.

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3628 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index b1a1b6af4ce02..ab0506148e848 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -678,6 +678,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3608), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3628), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Additional Realtek 8723AE Bluetooth devices */
 	{ USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },

From 86029c6025292920bc32210ee556acb8cacffcc8 Mon Sep 17 00:00:00 2001
From: Cheng Jiang <quic_chejiang@quicinc.com>
Date: Tue, 7 Jan 2025 17:26:48 +0800
Subject: [PATCH 08/23] dt-bindings: net: bluetooth: qca: Expand firmware-name
 property

Expand the firmware-name property to specify the names of NVM and
rampatch firmware to load. This update will support loading specific
firmware (nvm and rampatch) for certain chips, like the QCA6698
Bluetooth chip, which shares the same IP core as the WCN6855 but has
different RF components and RAM sizes, requiring new firmware files.

We might use different connectivity boards on the same platform. For
example, QCA6698-based boards can support either a two-antenna or
three-antenna solution, both of which work on the sa8775p-ride platform.
Due to differences in connectivity boards and variations in RF
performance from different foundries, different NVM configurations are
used based on the board ID.

So In firmware-name, if the NVM file has an extension, the NVM file will
be used. Otherwise, the system will first try the .bNN (board ID) file,
and if that fails, it will fall back to the .bin file.

Possible configurations:
firmware-name = "QCA6698/hpnv21.bin", "QCA6698/hpbtfw21.tlv";
firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
firmware-name = "QCA6698/hpnv21.bin";

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 .../bindings/net/bluetooth/qualcomm-bluetooth.yaml           | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
index 7bb68311c609d..a6bc0b18b3378 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -101,7 +101,10 @@ properties:
   max-speed: true
 
   firmware-name:
-    description: specify the name of nvm firmware to load
+    minItems: 1
+    items:
+      - description: specify the name of nvm firmware to load
+      - description: specify the name of rampatch firmware to load
 
   local-bd-address: true
 

From a4c5a468c6329bde7dfd46bacff2cbf5f8a8152e Mon Sep 17 00:00:00 2001
From: Cheng Jiang <quic_chejiang@quicinc.com>
Date: Tue, 7 Jan 2025 17:26:49 +0800
Subject: [PATCH 09/23] Bluetooth: qca: Update firmware-name to support board
 specific nvm

Different connectivity boards may be attached to the same platform. For
example, QCA6698-based boards can support either a two-antenna or
three-antenna solution, both of which work on the sa8775p-ride platform.
Due to differences in connectivity boards and variations in RF
performance from different foundries, different NVM configurations are
used based on the board ID.

Therefore, in the firmware-name property, if the NVM file has an
extension, the NVM file will be used. Otherwise, the system will first
try the .bNN (board ID) file, and if that fails, it will fall back to
the .bin file.

Possible configurations:
firmware-name = "QCA6698/hpnv21";
firmware-name = "QCA6698/hpnv21.bin";

Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btqca.c | 113 ++++++++++++++++++++++++++++----------
 1 file changed, 85 insertions(+), 28 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index dfbbac92242a8..5cb1fd1a0c7b5 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -272,6 +272,39 @@ int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
 }
 EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
 
+static bool qca_filename_has_extension(const char *filename)
+{
+	const char *suffix = strrchr(filename, '.');
+
+	/* File extensions require a dot, but not as the first or last character */
+	if (!suffix || suffix == filename || *(suffix + 1) == '\0')
+		return 0;
+
+	/* Avoid matching directories with names that look like files with extensions */
+	return !strchr(suffix, '/');
+}
+
+static bool qca_get_alt_nvm_file(char *filename, size_t max_size)
+{
+	char fwname[64];
+	const char *suffix;
+
+	/* nvm file name has an extension, replace with .bin */
+	if (qca_filename_has_extension(filename)) {
+		suffix = strrchr(filename, '.');
+		strscpy(fwname, filename, suffix - filename + 1);
+		snprintf(fwname + (suffix - filename),
+		       sizeof(fwname) - (suffix - filename), ".bin");
+		/* If nvm file is already the default one, return false to skip the retry. */
+		if (strcmp(fwname, filename) == 0)
+			return false;
+
+		snprintf(filename, max_size, "%s", fwname);
+		return true;
+	}
+	return false;
+}
+
 static int qca_tlv_check_data(struct hci_dev *hdev,
 			       struct qca_fw_config *config,
 			       u8 *fw_data, size_t fw_size,
@@ -564,6 +597,19 @@ static int qca_download_firmware(struct hci_dev *hdev,
 					   config->fwname, ret);
 				return ret;
 			}
+		}
+		/* If the board-specific file is missing, try loading the default
+		 * one, unless that was attempted already.
+		 */
+		else if (config->type == TLV_TYPE_NVM &&
+			 qca_get_alt_nvm_file(config->fwname, sizeof(config->fwname))) {
+			bt_dev_info(hdev, "QCA Downloading %s", config->fwname);
+			ret = request_firmware(&fw, config->fwname, &hdev->dev);
+			if (ret) {
+				bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",
+					   config->fwname, ret);
+				return ret;
+			}
 		} else {
 			bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",
 				   config->fwname, ret);
@@ -700,34 +746,38 @@ static int qca_check_bdaddr(struct hci_dev *hdev, const struct qca_fw_config *co
 	return 0;
 }
 
-static void qca_generate_hsp_nvm_name(char *fwname, size_t max_size,
+static void qca_get_nvm_name_by_board(char *fwname, size_t max_size,
+		const char *stem, enum qca_btsoc_type soc_type,
 		struct qca_btsoc_version ver, u8 rom_ver, u16 bid)
 {
 	const char *variant;
+	const char *prefix;
 
-	/* hsp gf chip */
-	if ((le32_to_cpu(ver.soc_id) & QCA_HSP_GF_SOC_MASK) == QCA_HSP_GF_SOC_ID)
-		variant = "g";
-	else
-		variant = "";
+	/* Set the default value to variant and prefix */
+	variant = "";
+	prefix = "b";
 
-	if (bid == 0x0)
-		snprintf(fwname, max_size, "qca/hpnv%02x%s.bin", rom_ver, variant);
-	else
-		snprintf(fwname, max_size, "qca/hpnv%02x%s.%x", rom_ver, variant, bid);
-}
+	if (soc_type == QCA_QCA2066)
+		prefix = "";
 
-static inline void qca_get_nvm_name_generic(struct qca_fw_config *cfg,
-					    const char *stem, u8 rom_ver, u16 bid)
-{
-	if (bid == 0x0)
-		snprintf(cfg->fwname, sizeof(cfg->fwname), "qca/%snv%02x.bin", stem, rom_ver);
-	else if (bid & 0xff00)
-		snprintf(cfg->fwname, sizeof(cfg->fwname),
-			 "qca/%snv%02x.b%x", stem, rom_ver, bid);
-	else
-		snprintf(cfg->fwname, sizeof(cfg->fwname),
-			 "qca/%snv%02x.b%02x", stem, rom_ver, bid);
+	if (soc_type == QCA_WCN6855 || soc_type == QCA_QCA2066) {
+		/* If the chip is manufactured by GlobalFoundries */
+		if ((le32_to_cpu(ver.soc_id) & QCA_HSP_GF_SOC_MASK) == QCA_HSP_GF_SOC_ID)
+			variant = "g";
+	}
+
+	if (rom_ver != 0) {
+		if (bid == 0x0 || bid == 0xffff)
+			snprintf(fwname, max_size, "qca/%s%02x%s.bin", stem, rom_ver, variant);
+		else
+			snprintf(fwname, max_size, "qca/%s%02x%s.%s%02x", stem, rom_ver,
+						variant, prefix, bid);
+	} else {
+		if (bid == 0x0 || bid == 0xffff)
+			snprintf(fwname, max_size, "qca/%s%s.bin", stem, variant);
+		else
+			snprintf(fwname, max_size, "qca/%s%s.%s%02x", stem, variant, prefix, bid);
+	}
 }
 
 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
@@ -816,8 +866,14 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	/* Download NVM configuration */
 	config.type = TLV_TYPE_NVM;
 	if (firmware_name) {
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/%s", firmware_name);
+		/* The firmware name has an extension, use it directly */
+		if (qca_filename_has_extension(firmware_name)) {
+			snprintf(config.fwname, sizeof(config.fwname), "qca/%s", firmware_name);
+		} else {
+			qca_read_fw_board_id(hdev, &boardid);
+			qca_get_nvm_name_by_board(config.fwname, sizeof(config.fwname),
+				 firmware_name, soc_type, ver, 0, boardid);
+		}
 	} else {
 		switch (soc_type) {
 		case QCA_WCN3990:
@@ -836,8 +892,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 				 "qca/apnv%02x.bin", rom_ver);
 			break;
 		case QCA_QCA2066:
-			qca_generate_hsp_nvm_name(config.fwname,
-				sizeof(config.fwname), ver, rom_ver, boardid);
+			qca_get_nvm_name_by_board(config.fwname,
+				sizeof(config.fwname), "hpnv", soc_type, ver,
+				rom_ver, boardid);
 			break;
 		case QCA_QCA6390:
 			snprintf(config.fwname, sizeof(config.fwname),
@@ -852,9 +909,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 				 "qca/hpnv%02x.bin", rom_ver);
 			break;
 		case QCA_WCN7850:
-			qca_get_nvm_name_generic(&config, "hmt", rom_ver, boardid);
+			qca_get_nvm_name_by_board(config.fwname, sizeof(config.fwname),
+				 "hmtnv", soc_type, ver, rom_ver, boardid);
 			break;
-
 		default:
 			snprintf(config.fwname, sizeof(config.fwname),
 				 "qca/nvm_%08x.bin", soc_ver);

From 30209aeff75fe18cf01a63332a7a7f472877d445 Mon Sep 17 00:00:00 2001
From: Cheng Jiang <quic_chejiang@quicinc.com>
Date: Tue, 7 Jan 2025 17:26:50 +0800
Subject: [PATCH 10/23] Bluetooth: qca: Expand firmware-name to load specific
 rampatch

The firmware-name property has been expanded to specify the names of NVM
and rampatch firmware for certain chips, such as the QCA6698 Bluetooth
chip. Although it shares the same IP core as the WCN6855, the QCA6698
has different RF components and RAM sizes, necessitating new firmware
files. This change allows for the configuration of NVM and rampatch in
DT.

Possible configurations:
firmware-name = QCA6698/hpnv21.bin, QCA6698/hpbtfw21.tlv;
firmware-name = QCA6698/hpnv21, QCA6698/hpbtfw21.tlv;

Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btqca.c   | 82 +++++++++++++++++++------------------
 drivers/bluetooth/btqca.h   |  5 ++-
 drivers/bluetooth/hci_qca.c | 22 +++++++---
 3 files changed, 63 insertions(+), 46 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 5cb1fd1a0c7b5..a6b53d1f23dbd 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -782,7 +782,7 @@ static void qca_get_nvm_name_by_board(char *fwname, size_t max_size,
 
 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
-		   const char *firmware_name)
+		   const char *firmware_name, const char *rampatch_name)
 {
 	struct qca_fw_config config = {};
 	int err;
@@ -811,44 +811,48 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 
 	/* Download rampatch file */
 	config.type = TLV_TYPE_PATCH;
-	switch (soc_type) {
-	case QCA_WCN3990:
-	case QCA_WCN3991:
-	case QCA_WCN3998:
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/crbtfw%02x.tlv", rom_ver);
-		break;
-	case QCA_WCN3988:
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/apbtfw%02x.tlv", rom_ver);
-		break;
-	case QCA_QCA2066:
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/hpbtfw%02x.tlv", rom_ver);
-		break;
-	case QCA_QCA6390:
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/htbtfw%02x.tlv", rom_ver);
-		break;
-	case QCA_WCN6750:
-		/* Choose mbn file by default.If mbn file is not found
-		 * then choose tlv file
-		 */
-		config.type = ELF_TYPE_PATCH;
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/msbtfw%02x.mbn", rom_ver);
-		break;
-	case QCA_WCN6855:
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/hpbtfw%02x.tlv", rom_ver);
-		break;
-	case QCA_WCN7850:
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/hmtbtfw%02x.tlv", rom_ver);
-		break;
-	default:
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/rampatch_%08x.bin", soc_ver);
+	if (rampatch_name) {
+		snprintf(config.fwname, sizeof(config.fwname), "qca/%s", rampatch_name);
+	} else {
+		switch (soc_type) {
+		case QCA_WCN3990:
+		case QCA_WCN3991:
+		case QCA_WCN3998:
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/crbtfw%02x.tlv", rom_ver);
+			break;
+		case QCA_WCN3988:
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/apbtfw%02x.tlv", rom_ver);
+			break;
+		case QCA_QCA2066:
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/hpbtfw%02x.tlv", rom_ver);
+			break;
+		case QCA_QCA6390:
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/htbtfw%02x.tlv", rom_ver);
+			break;
+		case QCA_WCN6750:
+			/* Choose mbn file by default.If mbn file is not found
+			 * then choose tlv file
+			 */
+			config.type = ELF_TYPE_PATCH;
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/msbtfw%02x.mbn", rom_ver);
+			break;
+		case QCA_WCN6855:
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/hpbtfw%02x.tlv", rom_ver);
+			break;
+		case QCA_WCN7850:
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/hmtbtfw%02x.tlv", rom_ver);
+			break;
+		default:
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/rampatch_%08x.bin", soc_ver);
+		}
 	}
 
 	err = qca_download_firmware(hdev, &config, soc_type, rom_ver);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index bb5207d7a8c72..9d28c88002257 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -161,7 +161,7 @@ enum qca_btsoc_type {
 int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
-		   const char *firmware_name);
+		   const char *firmware_name, const char *rampatch_name);
 int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
 			 enum qca_btsoc_type);
 int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
@@ -176,7 +176,8 @@ static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdad
 static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 				 enum qca_btsoc_type soc_type,
 				 struct qca_btsoc_version ver,
-				 const char *firmware_name)
+				 const char *firmware_name,
+				 const char *rampatch_name)
 {
 	return -EOPNOTSUPP;
 }
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 37129e6cb0eb1..5d75087cca998 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -228,7 +228,7 @@ struct qca_serdev {
 	u32 init_speed;
 	u32 oper_speed;
 	bool bdaddr_property_broken;
-	const char *firmware_name;
+	const char *firmware_name[2];
 };
 
 static int qca_regulator_enable(struct qca_serdev *qcadev);
@@ -258,7 +258,18 @@ static const char *qca_get_firmware_name(struct hci_uart *hu)
 	if (hu->serdev) {
 		struct qca_serdev *qsd = serdev_device_get_drvdata(hu->serdev);
 
-		return qsd->firmware_name;
+		return qsd->firmware_name[0];
+	} else {
+		return NULL;
+	}
+}
+
+static const char *qca_get_rampatch_name(struct hci_uart *hu)
+{
+	if (hu->serdev) {
+		struct qca_serdev *qsd = serdev_device_get_drvdata(hu->serdev);
+
+		return qsd->firmware_name[1];
 	} else {
 		return NULL;
 	}
@@ -1855,6 +1866,7 @@ static int qca_setup(struct hci_uart *hu)
 	unsigned int retries = 0;
 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
 	const char *firmware_name = qca_get_firmware_name(hu);
+	const char *rampatch_name = qca_get_rampatch_name(hu);
 	int ret;
 	struct qca_btsoc_version ver;
 	struct qca_serdev *qcadev;
@@ -1963,7 +1975,7 @@ static int qca_setup(struct hci_uart *hu)
 
 	/* Setup patch / NVM configurations */
 	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, ver,
-			firmware_name);
+			firmware_name, rampatch_name);
 	if (!ret) {
 		clear_bit(QCA_IBS_DISABLED, &qca->flags);
 		qca_debugfs_init(hdev);
@@ -2309,8 +2321,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 	qcadev->serdev_hu.serdev = serdev;
 	data = device_get_match_data(&serdev->dev);
 	serdev_device_set_drvdata(serdev, qcadev);
-	device_property_read_string(&serdev->dev, "firmware-name",
-					 &qcadev->firmware_name);
+	device_property_read_string_array(&serdev->dev, "firmware-name",
+					 qcadev->firmware_name, ARRAY_SIZE(qcadev->firmware_name));
 	device_property_read_u32(&serdev->dev, "max-speed",
 				 &qcadev->oper_speed);
 	if (!qcadev->oper_speed)

From b88655bc6593c6a7fdc1248b212d17e581c4334e Mon Sep 17 00:00:00 2001
From: Charles Han <hanchunchao@inspur.com>
Date: Fri, 27 Dec 2024 17:20:46 +0800
Subject: [PATCH 11/23] Bluetooth: btbcm: Fix NULL deref in
 btbcm_get_board_name()

devm_kstrdup() can return a NULL pointer on failure,but this
returned value in btbcm_get_board_name() is not checked.
Add NULL check in btbcm_get_board_name(), to handle kernel NULL
pointer dereference error.

Fixes: f9183eaad915 ("Bluetooth: btbcm: Use devm_kstrdup()")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btbcm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index a1153ada74d20..0a60660fc8ce8 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -553,6 +553,9 @@ static const char *btbcm_get_board_name(struct device *dev)
 
 	/* get rid of any '/' in the compatible string */
 	board_type = devm_kstrdup(dev, tmp, GFP_KERNEL);
+	if (!board_type)
+		return NULL;
+
 	strreplace(board_type, '/', '-');
 
 	return board_type;

From 3c15082f3567032d196e8760753373332508c2ca Mon Sep 17 00:00:00 2001
From: Max Chou <max.chou@realtek.com>
Date: Tue, 31 Dec 2024 14:57:19 +0800
Subject: [PATCH 12/23] Bluetooth: btrtl: check for NULL in
 btrtl_setup_realtek()

If insert an USB dongle which chip is not maintained in ic_id_table, it
will hit the NULL point accessed. Add a null point check to avoid the
Kernel Oops.

Fixes: b39910bb54d9 ("Bluetooth: Populate hci_set_hw_info for Intel and Realtek")
Reviewed-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btrtl.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 83025f457ca04..d3eba0d4a57d3 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -1351,12 +1351,14 @@ int btrtl_setup_realtek(struct hci_dev *hdev)
 
 	btrtl_set_quirks(hdev, btrtl_dev);
 
-	hci_set_hw_info(hdev,
+	if (btrtl_dev->ic_info) {
+		hci_set_hw_info(hdev,
 			"RTL lmp_subver=%u hci_rev=%u hci_ver=%u hci_bus=%u",
 			btrtl_dev->ic_info->lmp_subver,
 			btrtl_dev->ic_info->hci_rev,
 			btrtl_dev->ic_info->hci_ver,
 			btrtl_dev->ic_info->hci_bus);
+	}
 
 	btrtl_free(btrtl_dev);
 	return ret;

From 4259cdbfc7cee53f4e9bbc4fffd7d0d2d73b26ba Mon Sep 17 00:00:00 2001
From: Garrett Wilke <garrett@system76.com>
Date: Wed, 8 Jan 2025 13:01:40 -0700
Subject: [PATCH 13/23] Bluetooth: btusb: Add MT7921e device 13d3:3576

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3576 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: Garrett Wilke <garrett@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index ab0506148e848..30ba45a9a75f7 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -602,6 +602,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3567), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3576), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3578), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3583), .driver_info = BTUSB_MEDIATEK |

From cca4fe34979a77d9df5c0acf935e9cc939fe5cd6 Mon Sep 17 00:00:00 2001
From: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Date: Tue, 7 Jan 2025 19:11:57 +0530
Subject: [PATCH 14/23] dt-bindings: bluetooth: Utilize PMU abstraction for
 WCN6750

We are now using the on-chip PMU node for power sequencing to manage the
enable/disable functionality of Bluetooth. Consequently, the inputs
previously marked as required under the Bluetooth node can be removed.

For instance, the enable GPIO is now managed by the PMU node with the
property bt-enable-gpios.

Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 .../bindings/net/bluetooth/qualcomm-bluetooth.yaml           | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
index a6bc0b18b3378..a72152f7e29b4 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -157,16 +157,11 @@ allOf:
               - qcom,wcn6750-bt
     then:
       required:
-        - enable-gpios
-        - swctrl-gpios
-        - vddio-supply
         - vddaon-supply
-        - vddbtcxmx-supply
         - vddrfacmn-supply
         - vddrfa0p8-supply
         - vddrfa1p7-supply
         - vddrfa1p2-supply
-        - vddasd-supply
   - if:
       properties:
         compatible:

From 181a2631a3144cd79e40ec5c77e7153085310dd3 Mon Sep 17 00:00:00 2001
From: Garrett Wilke <garrett@system76.com>
Date: Wed, 8 Jan 2025 11:22:13 -0700
Subject: [PATCH 15/23] Bluetooth: btusb: Add RTL8851BE device 13d3:3600

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.

T:  Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3600 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Signed-off-by: Garrett Wilke <garrett@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btusb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 30ba45a9a75f7..abdb07d71be07 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -483,6 +483,9 @@ static const struct usb_device_id quirks_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3549), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
 
+	/* Realtek 8851BE Bluetooth devices */
+	{ USB_DEVICE(0x13d3, 0x3600), .driver_info = BTUSB_REALTEK },
+
 	/* Realtek 8852AE Bluetooth devices */
 	{ USB_DEVICE(0x0bda, 0x2852), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },

From 5f397409f8ee5bc82901eeaf799e1cbc4f8edcf1 Mon Sep 17 00:00:00 2001
From: Fedor Pchelkin <pchelkin@ispras.ru>
Date: Wed, 18 Dec 2024 00:19:59 +0300
Subject: [PATCH 16/23] Bluetooth: L2CAP: handle NULL sock pointer in
 l2cap_sock_alloc

A NULL sock pointer is passed into l2cap_sock_alloc() when it is called
from l2cap_sock_new_connection_cb() and the error handling paths should
also be aware of it.

Seemingly a more elegant solution would be to swap bt_sock_alloc() and
l2cap_chan_create() calls since they are not interdependent to that moment
but then l2cap_chan_create() adds the soon to be deallocated and still
dummy-initialized channel to the global list accessible by many L2CAP
paths. The channel would be removed from the list in short period of time
but be a bit more straight-forward here and just check for NULL instead of
changing the order of function calls.

Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.

Fixes: 7c4f78cdb8e7 ("Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create()")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 net/bluetooth/l2cap_sock.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 3d2553dcdb1b3..49f97d4138ea7 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -1888,7 +1888,8 @@ static struct sock *l2cap_sock_alloc(struct net *net, struct socket *sock,
 	chan = l2cap_chan_create();
 	if (!chan) {
 		sk_free(sk);
-		sock->sk = NULL;
+		if (sock)
+			sock->sk = NULL;
 		return NULL;
 	}
 

From a7208610761ae9b3bc109ddc493eb7c332fca5b2 Mon Sep 17 00:00:00 2001
From: Hao Qin <hao.qin@mediatek.com>
Date: Fri, 10 Jan 2025 17:55:48 +0800
Subject: [PATCH 17/23] Bluetooth: btmtk: Remove resetting mt7921 before
 downloading the fw

Remove resetting mt7921 before downloading the fw, as it may cause
command timeout when performing the reset.

Signed-off-by: Hao Qin <hao.qin@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btmtk.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
index 224eafc27dbea..68846c5bd4f79 100644
--- a/drivers/bluetooth/btmtk.c
+++ b/drivers/bluetooth/btmtk.c
@@ -1329,7 +1329,6 @@ int btmtk_usb_setup(struct hci_dev *hdev)
 		fwname = FIRMWARE_MT7668;
 		break;
 	case 0x7922:
-	case 0x7961:
 	case 0x7925:
 		/* Reset the device to ensure it's in the initial state before
 		 * downloading the firmware to ensure.
@@ -1337,7 +1336,8 @@ int btmtk_usb_setup(struct hci_dev *hdev)
 
 		if (!test_bit(BTMTK_FIRMWARE_LOADED, &btmtk_data->flags))
 			btmtk_usb_subsys_reset(hdev, dev_id);
-
+		fallthrough;
+	case 0x7961:
 		btmtk_fw_get_filename(fw_bin_name, sizeof(fw_bin_name), dev_id,
 				      fw_version, fw_flavor);
 

From acdbea5e71fe955c3cdf70af7e0e43795d230947 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Tue, 14 Jan 2025 11:56:41 +0100
Subject: [PATCH 18/23] Bluetooth: Use str_enable_disable-like helpers

Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read.  Ternary
   operator has three arguments and with wrapping might lead to quite
   long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
   file.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btintel.c     | 17 +++++++++--------
 drivers/bluetooth/btmrvl_main.c |  3 ++-
 drivers/bluetooth/hci_qca.c     |  5 +++--
 3 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index d496cf2c34111..d2540b28bc7ae 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/regmap.h>
+#include <linux/string_choices.h>
 #include <linux/acpi.h>
 #include <acpi/acpi_bus.h>
 #include <linux/unaligned.h>
@@ -506,13 +507,13 @@ int btintel_version_info_tlv(struct hci_dev *hdev,
 
 		bt_dev_info(hdev, "Device revision is %u", version->dev_rev_id);
 		bt_dev_info(hdev, "Secure boot is %s",
-			    version->secure_boot ? "enabled" : "disabled");
+			    str_enabled_disabled(version->secure_boot));
 		bt_dev_info(hdev, "OTP lock is %s",
-			    version->otp_lock ? "enabled" : "disabled");
+			    str_enabled_disabled(version->otp_lock));
 		bt_dev_info(hdev, "API lock is %s",
-			    version->api_lock ? "enabled" : "disabled");
+			    str_enabled_disabled(version->api_lock));
 		bt_dev_info(hdev, "Debug lock is %s",
-			    version->debug_lock ? "enabled" : "disabled");
+			    str_enabled_disabled(version->debug_lock));
 		bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
 			    version->min_fw_build_nn, version->min_fw_build_cw,
 			    2000 + version->min_fw_build_yy);
@@ -927,16 +928,16 @@ int btintel_read_boot_params(struct hci_dev *hdev,
 		    le16_to_cpu(params->dev_revid));
 
 	bt_dev_info(hdev, "Secure boot is %s",
-		    params->secure_boot ? "enabled" : "disabled");
+		    str_enabled_disabled(params->secure_boot));
 
 	bt_dev_info(hdev, "OTP lock is %s",
-		    params->otp_lock ? "enabled" : "disabled");
+		    str_enabled_disabled(params->otp_lock));
 
 	bt_dev_info(hdev, "API lock is %s",
-		    params->api_lock ? "enabled" : "disabled");
+		    str_enabled_disabled(params->api_lock));
 
 	bt_dev_info(hdev, "Debug lock is %s",
-		    params->debug_lock ? "enabled" : "disabled");
+		    str_enabled_disabled(params->debug_lock));
 
 	bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
 		    params->min_fw_build_nn, params->min_fw_build_cw,
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 18f34998a1204..e26b07a9387da 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -7,6 +7,7 @@
 
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/string_choices.h>
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 #include <linux/mmc/sdio_func.h>
@@ -88,7 +89,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 			else
 				adapter->psmode = 0;
 			BT_DBG("PS Mode:%s",
-				(adapter->psmode) ? "Enable" : "Disable");
+			       str_enable_disable(adapter->psmode));
 		} else {
 			BT_DBG("PS Mode command failed");
 		}
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 5d75087cca998..0cfe40393600d 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -31,6 +31,7 @@
 #include <linux/pwrseq/consumer.h>
 #include <linux/regulator/consumer.h>
 #include <linux/serdev.h>
+#include <linux/string_choices.h>
 #include <linux/mutex.h>
 #include <linux/unaligned.h>
 
@@ -343,8 +344,8 @@ static void serial_clock_vote(unsigned long vote, struct hci_uart *hu)
 		else
 			__serial_clock_off(hu->tty);
 
-		BT_DBG("Vote serial clock %s(%s)", new_vote ? "true" : "false",
-		       vote ? "true" : "false");
+		BT_DBG("Vote serial clock %s(%s)", str_true_false(new_vote),
+		       str_true_false(vote));
 
 		diff = jiffies_to_msecs(jiffies - qca->vote_last_jif);
 

From 7c393421755daf35ae1e4e0016b99f308123751a Mon Sep 17 00:00:00 2001
From: Hsin-chen Chuang <chharry@chromium.org>
Date: Wed, 8 Jan 2025 20:24:42 +0800
Subject: [PATCH 19/23] Bluetooth: Remove the cmd timeout count in btusb

Remove the cmd timeout count in btusb since we only ever allow one
command in flight at a time. We should always reset after a single
command times out.

Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btusb.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index abdb07d71be07..9f267b70f6ab4 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -890,7 +890,6 @@ struct btusb_data {
 	int (*disconnect)(struct hci_dev *hdev);
 
 	int oob_wake_irq;   /* irq for out-of-band wake-on-bt */
-	unsigned cmd_timeout_cnt;
 
 	struct qca_dump_info qca_dump;
 };
@@ -923,9 +922,6 @@ static void btusb_intel_cmd_timeout(struct hci_dev *hdev)
 	struct gpio_desc *reset_gpio = data->reset_gpio;
 	struct btintel_data *intel_data = hci_get_priv(hdev);
 
-	if (++data->cmd_timeout_cnt < 5)
-		return;
-
 	if (intel_data->acpi_reset_method) {
 		if (test_and_set_bit(INTEL_ACPI_RESET_ACTIVE, intel_data->flags)) {
 			bt_dev_err(hdev, "acpi: last reset failed ? Not resetting again");
@@ -1008,9 +1004,6 @@ static void btusb_rtl_cmd_timeout(struct hci_dev *hdev)
 
 	btusb_rtl_alloc_devcoredump(hdev, &hdr, NULL, 0);
 
-	if (++data->cmd_timeout_cnt < 5)
-		return;
-
 	if (!reset_gpio) {
 		btusb_reset(hdev);
 		return;
@@ -1055,9 +1048,6 @@ static void btusb_qca_cmd_timeout(struct hci_dev *hdev)
 		return;
 	}
 
-	if (++data->cmd_timeout_cnt < 5)
-		return;
-
 	if (reset_gpio) {
 		bt_dev_err(hdev, "Reset qca device via bt_en gpio");
 

From f07d478090b0a03dda46fb45b5c6e089a8408351 Mon Sep 17 00:00:00 2001
From: Hsin-chen Chuang <chharry@chromium.org>
Date: Wed, 8 Jan 2025 20:24:43 +0800
Subject: [PATCH 20/23] Bluetooth: Get rid of cmd_timeout and use the reset
 callback

The hdev->reset is never used now and the hdev->cmd_timeout actually
does reset. This patch changes the call path from
  hdev->cmd_timeout -> vendor_cmd_timeout -> btusb_reset -> hdev->reset
, to
  hdev->reset -> vendor_reset -> btusb_reset
Which makes it clear when we export the hdev->reset to a wider usage
e.g. allowing reset from sysfs.

This patch doesn't introduce any behavior change.

Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btmtksdio.c    |  4 ++--
 drivers/bluetooth/btusb.c        | 18 +++++++++---------
 drivers/bluetooth/hci_qca.c      |  6 +++---
 include/net/bluetooth/hci_core.h |  1 -
 net/bluetooth/hci_core.c         |  4 ++--
 5 files changed, 16 insertions(+), 17 deletions(-)

diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index a1dfcfe43d3aa..bd5464bde174f 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -1249,7 +1249,7 @@ static int btmtksdio_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 	return 0;
 }
 
-static void btmtksdio_cmd_timeout(struct hci_dev *hdev)
+static void btmtksdio_reset(struct hci_dev *hdev)
 {
 	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
 	u32 status;
@@ -1360,7 +1360,7 @@ static int btmtksdio_probe(struct sdio_func *func,
 
 	hdev->open     = btmtksdio_open;
 	hdev->close    = btmtksdio_close;
-	hdev->cmd_timeout = btmtksdio_cmd_timeout;
+	hdev->reset    = btmtksdio_reset;
 	hdev->flush    = btmtksdio_flush;
 	hdev->setup    = btmtksdio_setup;
 	hdev->shutdown = btmtksdio_shutdown;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 9f267b70f6ab4..9aa018d4f6f50 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -916,7 +916,7 @@ static void btusb_reset(struct hci_dev *hdev)
 	usb_queue_reset_device(data->intf);
 }
 
-static void btusb_intel_cmd_timeout(struct hci_dev *hdev)
+static void btusb_intel_reset(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	struct gpio_desc *reset_gpio = data->reset_gpio;
@@ -994,7 +994,7 @@ static inline void btusb_rtl_alloc_devcoredump(struct hci_dev *hdev,
 	}
 }
 
-static void btusb_rtl_cmd_timeout(struct hci_dev *hdev)
+static void btusb_rtl_reset(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	struct gpio_desc *reset_gpio = data->reset_gpio;
@@ -1038,13 +1038,13 @@ static void btusb_rtl_hw_error(struct hci_dev *hdev, u8 code)
 	btusb_rtl_alloc_devcoredump(hdev, &hdr, NULL, 0);
 }
 
-static void btusb_qca_cmd_timeout(struct hci_dev *hdev)
+static void btusb_qca_reset(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	struct gpio_desc *reset_gpio = data->reset_gpio;
 
 	if (test_bit(BTUSB_HW_SSR_ACTIVE, &data->flags)) {
-		bt_dev_info(hdev, "Ramdump in progress, defer cmd_timeout");
+		bt_dev_info(hdev, "Ramdump in progress, defer reset");
 		return;
 	}
 
@@ -3868,7 +3868,7 @@ static int btusb_probe(struct usb_interface *intf,
 
 		/* Transport specific configuration */
 		hdev->send = btusb_send_frame_intel;
-		hdev->cmd_timeout = btusb_intel_cmd_timeout;
+		hdev->reset = btusb_intel_reset;
 
 		if (id->driver_info & BTUSB_INTEL_NO_WBS_SUPPORT)
 			btintel_set_flag(hdev, INTEL_ROM_LEGACY_NO_WBS_SUPPORT);
@@ -3888,7 +3888,7 @@ static int btusb_probe(struct usb_interface *intf,
 		hdev->setup = btusb_mtk_setup;
 		hdev->shutdown = btusb_mtk_shutdown;
 		hdev->manufacturer = 70;
-		hdev->cmd_timeout = btmtk_reset_sync;
+		hdev->reset = btmtk_reset_sync;
 		hdev->set_bdaddr = btmtk_set_bdaddr;
 		hdev->send = btusb_send_frame_mtk;
 		set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
@@ -3920,7 +3920,7 @@ static int btusb_probe(struct usb_interface *intf,
 		data->setup_on_usb = btusb_setup_qca;
 		hdev->shutdown = btusb_shutdown_qca;
 		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
-		hdev->cmd_timeout = btusb_qca_cmd_timeout;
+		hdev->reset = btusb_qca_reset;
 		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 		btusb_check_needs_reset_resume(intf);
 	}
@@ -3934,7 +3934,7 @@ static int btusb_probe(struct usb_interface *intf,
 		data->setup_on_usb = btusb_setup_qca;
 		hdev->shutdown = btusb_shutdown_qca;
 		hdev->set_bdaddr = btusb_set_bdaddr_wcn6855;
-		hdev->cmd_timeout = btusb_qca_cmd_timeout;
+		hdev->reset = btusb_qca_reset;
 		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 		hci_set_msft_opcode(hdev, 0xFD70);
 	}
@@ -3953,7 +3953,7 @@ static int btusb_probe(struct usb_interface *intf,
 		btrtl_set_driver_name(hdev, btusb_driver.name);
 		hdev->setup = btusb_setup_realtek;
 		hdev->shutdown = btrtl_shutdown_realtek;
-		hdev->cmd_timeout = btusb_rtl_cmd_timeout;
+		hdev->reset = btusb_rtl_reset;
 		hdev->hw_error = btusb_rtl_hw_error;
 
 		/* Realtek devices need to set remote wakeup on auto-suspend */
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 0cfe40393600d..0ac2168f1dc4f 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1650,7 +1650,7 @@ static void qca_hw_error(struct hci_dev *hdev, u8 code)
 	clear_bit(QCA_HW_ERROR_EVENT, &qca->flags);
 }
 
-static void qca_cmd_timeout(struct hci_dev *hdev)
+static void qca_reset(struct hci_dev *hdev)
 {
 	struct hci_uart *hu = hci_get_drvdata(hdev);
 	struct qca_data *qca = hu->priv;
@@ -1981,7 +1981,7 @@ static int qca_setup(struct hci_uart *hu)
 		clear_bit(QCA_IBS_DISABLED, &qca->flags);
 		qca_debugfs_init(hdev);
 		hu->hdev->hw_error = qca_hw_error;
-		hu->hdev->cmd_timeout = qca_cmd_timeout;
+		hu->hdev->reset = qca_reset;
 		if (hu->serdev) {
 			if (device_can_wakeup(hu->serdev->ctrl->dev.parent))
 				hu->hdev->wakeup = qca_wakeup;
@@ -2215,7 +2215,7 @@ static int qca_power_off(struct hci_dev *hdev)
 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
 
 	hu->hdev->hw_error = NULL;
-	hu->hdev->cmd_timeout = NULL;
+	hu->hdev->reset = NULL;
 
 	del_timer_sync(&qca->wake_retrans_timer);
 	del_timer_sync(&qca->tx_idle_timer);
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 84b522a100192..f756fac95488a 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -633,7 +633,6 @@ struct hci_dev {
 	int (*post_init)(struct hci_dev *hdev);
 	int (*set_diag)(struct hci_dev *hdev, bool enable);
 	int (*set_bdaddr)(struct hci_dev *hdev, const bdaddr_t *bdaddr);
-	void (*cmd_timeout)(struct hci_dev *hdev);
 	void (*reset)(struct hci_dev *hdev);
 	bool (*wakeup)(struct hci_dev *hdev);
 	int (*set_quality_report)(struct hci_dev *hdev, bool enable);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index ba955447b359e..e7ec12437c8b1 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1456,8 +1456,8 @@ static void hci_cmd_timeout(struct work_struct *work)
 		bt_dev_err(hdev, "command tx timeout");
 	}
 
-	if (hdev->cmd_timeout)
-		hdev->cmd_timeout(hdev);
+	if (hdev->reset)
+		hdev->reset(hdev);
 
 	atomic_set(&hdev->cmd_cnt, 1);
 	queue_work(hdev->workqueue, &hdev->cmd_work);

From 0f8a0013741163459fc6cf4610bb9ed2ec25fb94 Mon Sep 17 00:00:00 2001
From: Hsin-chen Chuang <chharry@chromium.org>
Date: Wed, 8 Jan 2025 20:24:44 +0800
Subject: [PATCH 21/23] Bluetooth: Allow reset via sysfs

Allow sysfs to trigger hdev reset. This is required to recover devices
that are not responsive from userspace.

Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 net/bluetooth/hci_sysfs.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index 4b54dbbf0729a..041ce9adc378a 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -90,9 +90,28 @@ static void bt_host_release(struct device *dev)
 	module_put(THIS_MODULE);
 }
 
+static ssize_t reset_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct hci_dev *hdev = to_hci_dev(dev);
+
+	if (hdev->reset)
+		hdev->reset(hdev);
+
+	return count;
+}
+static DEVICE_ATTR_WO(reset);
+
+static struct attribute *bt_host_attrs[] = {
+	&dev_attr_reset.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(bt_host);
+
 static const struct device_type bt_host = {
 	.name    = "host",
 	.release = bt_host_release,
+	.groups = bt_host_groups,
 };
 
 void hci_init_sysfs(struct hci_dev *hdev)

From a2fad248947d702ed3dcb52b8377c1a3ae201e44 Mon Sep 17 00:00:00 2001
From: Zijun Hu <quic_zijuhu@quicinc.com>
Date: Mon, 13 Jan 2025 22:43:23 +0800
Subject: [PATCH 22/23] Bluetooth: qca: Fix poor RF performance for WCN6855

For WCN6855, board ID specific NVM needs to be downloaded once board ID
is available, but the default NVM is always downloaded currently.

The wrong NVM causes poor RF performance, and effects user experience
for several types of laptop with WCN6855 on the market.

Fix by downloading board ID specific NVM if board ID is available.

Fixes: 095327fede00 ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855")
Cc: stable@vger.kernel.org # 6.4
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 drivers/bluetooth/btqca.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index a6b53d1f23dbd..cdf09d9a9ad27 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -909,8 +909,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 				 "qca/msnv%02x.bin", rom_ver);
 			break;
 		case QCA_WCN6855:
-			snprintf(config.fwname, sizeof(config.fwname),
-				 "qca/hpnv%02x.bin", rom_ver);
+			qca_read_fw_board_id(hdev, &boardid);
+			qca_get_nvm_name_by_board(config.fwname, sizeof(config.fwname),
+						  "hpnv", soc_type, ver, rom_ver, boardid);
 			break;
 		case QCA_WCN7850:
 			qca_get_nvm_name_by_board(config.fwname, sizeof(config.fwname),

From 26fbd3494a7dd26269cb0817c289267dbcfdec06 Mon Sep 17 00:00:00 2001
From: Mazin Al Haddad <mazin@getstate.dev>
Date: Tue, 24 Dec 2024 05:06:16 +0300
Subject: [PATCH 23/23] Bluetooth: MGMT: Fix slab-use-after-free Read in
 mgmt_remove_adv_monitor_sync

This fixes the following crash:

==================================================================
BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543
Read of size 8 at addr ffff88814128f898 by task kworker/u9:4/5961

CPU: 1 UID: 0 PID: 5961 Comm: kworker/u9:4 Not tainted 6.12.0-syzkaller-10684-gf1cd565ce577 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
 print_address_description mm/kasan/report.c:378 [inline]
 print_report+0x169/0x550 mm/kasan/report.c:489
 kasan_report+0x143/0x180 mm/kasan/report.c:602
 mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543
 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310
 worker_thread+0x870/0xd30 kernel/workqueue.c:3391
 kthread+0x2f0/0x390 kernel/kthread.c:389
 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
 </TASK>

Allocated by task 16026:
 kasan_save_stack mm/kasan/common.c:47 [inline]
 kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
 poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
 __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394
 kasan_kmalloc include/linux/kasan.h:260 [inline]
 __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4314
 kmalloc_noprof include/linux/slab.h:901 [inline]
 kzalloc_noprof include/linux/slab.h:1037 [inline]
 mgmt_pending_new+0x65/0x250 net/bluetooth/mgmt_util.c:269
 mgmt_pending_add+0x36/0x120 net/bluetooth/mgmt_util.c:296
 remove_adv_monitor+0x102/0x1b0 net/bluetooth/mgmt.c:5568
 hci_mgmt_cmd+0xc47/0x11d0 net/bluetooth/hci_sock.c:1712
 hci_sock_sendmsg+0x7b8/0x11c0 net/bluetooth/hci_sock.c:1832
 sock_sendmsg_nosec net/socket.c:711 [inline]
 __sock_sendmsg+0x221/0x270 net/socket.c:726
 sock_write_iter+0x2d7/0x3f0 net/socket.c:1147
 new_sync_write fs/read_write.c:586 [inline]
 vfs_write+0xaeb/0xd30 fs/read_write.c:679
 ksys_write+0x18f/0x2b0 fs/read_write.c:731
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Freed by task 16022:
 kasan_save_stack mm/kasan/common.c:47 [inline]
 kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582
 poison_slab_object mm/kasan/common.c:247 [inline]
 __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
 kasan_slab_free include/linux/kasan.h:233 [inline]
 slab_free_hook mm/slub.c:2338 [inline]
 slab_free mm/slub.c:4598 [inline]
 kfree+0x196/0x420 mm/slub.c:4746
 mgmt_pending_foreach+0xd1/0x130 net/bluetooth/mgmt_util.c:259
 __mgmt_power_off+0x183/0x430 net/bluetooth/mgmt.c:9550
 hci_dev_close_sync+0x6c4/0x11c0 net/bluetooth/hci_sync.c:5208
 hci_dev_do_close net/bluetooth/hci_core.c:483 [inline]
 hci_dev_close+0x112/0x210 net/bluetooth/hci_core.c:508
 sock_do_ioctl+0x158/0x460 net/socket.c:1209
 sock_ioctl+0x626/0x8e0 net/socket.c:1328
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:906 [inline]
 __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Reported-by: syzbot+479aff51bb361ef5aa18@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=479aff51bb361ef5aa18
Tested-by: syzbot+479aff51bb361ef5aa18@syzkaller.appspotmail.com
Signed-off-by: Mazin Al Haddad <mazin@getstate.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 net/bluetooth/mgmt.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 5e46f37644406..09bac3c9c2d5f 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -5388,10 +5388,16 @@ static void mgmt_remove_adv_monitor_complete(struct hci_dev *hdev,
 {
 	struct mgmt_rp_remove_adv_monitor rp;
 	struct mgmt_pending_cmd *cmd = data;
-	struct mgmt_cp_remove_adv_monitor *cp = cmd->param;
+	struct mgmt_cp_remove_adv_monitor *cp;
+
+	if (status == -ECANCELED ||
+	    cmd != pending_find(MGMT_OP_REMOVE_ADV_MONITOR, hdev))
+		return;
 
 	hci_dev_lock(hdev);
 
+	cp = cmd->param;
+
 	rp.monitor_handle = cp->monitor_handle;
 
 	if (!status)
@@ -5409,6 +5415,10 @@ static void mgmt_remove_adv_monitor_complete(struct hci_dev *hdev,
 static int mgmt_remove_adv_monitor_sync(struct hci_dev *hdev, void *data)
 {
 	struct mgmt_pending_cmd *cmd = data;
+
+	if (cmd != pending_find(MGMT_OP_REMOVE_ADV_MONITOR, hdev))
+		return -ECANCELED;
+
 	struct mgmt_cp_remove_adv_monitor *cp = cmd->param;
 	u16 handle = __le16_to_cpu(cp->monitor_handle);