diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml index 85e02854f0834..6ccdaf99c7787 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: mediatek,mt7621-memc + items: + - const: mediatek,mt7621-memc + - const: syscon reg: maxItems: 1 @@ -25,6 +27,6 @@ additionalProperties: false examples: - | memory-controller@5000 { - compatible = "mediatek,mt7621-memc"; + compatible = "mediatek,mt7621-memc", "syscon"; reg = <0x5000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml index bc6446e1f55ad..f2e9ff3f580bf 100644 --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml @@ -104,7 +104,14 @@ properties: gpio-controller: type: boolean description: - If defined, MT7530's LED controller will run on GPIO mode. + If defined, LED controller of the MT7530 switch will run on GPIO mode. + + There are 15 controllable pins. + port 0 LED 0..2 as GPIO 0..2 + port 1 LED 0..2 as GPIO 3..5 + port 2 LED 0..2 as GPIO 6..8 + port 3 LED 0..2 as GPIO 9..11 + port 4 LED 0..2 as GPIO 12..14 "#interrupt-cells": const: 1 @@ -263,6 +270,7 @@ allOf: then: $ref: "#/$defs/mt7531-dsa-port" properties: + gpio-controller: false mediatek,mcm: false - if: @@ -285,9 +293,9 @@ examples: #address-cells = <1>; #size-cells = <0>; - switch@0 { + switch@1f { compatible = "mediatek,mt7530"; - reg = <0>; + reg = <0x1f>; reset-gpios = <&pio 33 0>; @@ -346,9 +354,9 @@ examples: #address-cells = <1>; #size-cells = <0>; - switch@0 { + switch@1f { compatible = "mediatek,mt7530"; - reg = <0>; + reg = <0x1f>; mediatek,mcm; resets = <ðsys MT2701_ETHSYS_MCM_RST>; @@ -474,9 +482,9 @@ examples: #address-cells = <1>; #size-cells = <0>; - switch@0 { + switch@1f { compatible = "mediatek,mt7621"; - reg = <0>; + reg = <0x1f>; mediatek,mcm; resets = <&sysc MT7621_RST_MCM>; @@ -560,9 +568,9 @@ examples: reg = <4>; }; - switch@0 { + switch@1f { compatible = "mediatek,mt7621"; - reg = <0>; + reg = <0x1f>; mediatek,mcm; resets = <&sysc MT7621_RST_MCM>; @@ -650,9 +658,9 @@ examples: phy-mode = "rgmii"; }; - switch@0 { + switch@1f { compatible = "mediatek,mt7621"; - reg = <0>; + reg = <0x1f>; mediatek,mcm; resets = <&sysc MT7621_RST_MCM>; @@ -730,9 +738,9 @@ examples: phy-mode = "rgmii"; }; - switch@0 { + switch@1f { compatible = "mediatek,mt7621"; - reg = <0>; + reg = <0x1f>; mediatek,mcm; resets = <&sysc MT7621_RST_MCM>; diff --git a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt deleted file mode 100644 index 358fed2fab434..0000000000000 --- a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt +++ /dev/null @@ -1,24 +0,0 @@ -Mediatek Gigabit Switch -======================= - -The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621). - -Required properties: -- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw" -- reg: Address and length of the register set for the device -- interrupts: Should contain the gigabit switches interrupt -- resets: Should contain the gigabit switches resets -- reset-names: Should contain the reset names "gsw" - -Example: - -gsw@10110000 { - compatible = "ralink,mt7620-gsw"; - reg = <0x10110000 8000>; - - resets = <&rstctrl 23>; - reset-names = "gsw"; - - interrupt-parent = <&intc>; - interrupts = <17>; -}; diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt deleted file mode 100644 index 9fe1a0a22e441..0000000000000 --- a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt +++ /dev/null @@ -1,59 +0,0 @@ -Ralink Frame Engine Ethernet controller -======================================= - -The Ralink frame engine ethernet controller can be found on Ralink and -Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8). - -Depending on the SoC, there is a number of ports connected to the CPU port -directly and/or via a (gigabit-)switch. - -* Ethernet controller node - -Required properties: -- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth", - "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth", - "mediatek,mt7620-eth", "mediatek,mt7621-eth" -- reg: Address and length of the register set for the device -- interrupts: Should contain the frame engines interrupt -- resets: Should contain the frame engines resets -- reset-names: Should contain the reset names "fe". If a switch is present - "esw" is also required. - - -* Ethernet port node - -Required properties: -- compatible: Should be "ralink,eth-port" -- reg: The number of the physical port -- phy-handle: reference to the node describing the phy - -Example: - -mdio-bus { - ... - phy0: ethernet-phy@0 { - phy-mode = "mii"; - reg = <0>; - }; -}; - -ethernet@400000 { - compatible = "ralink,rt2880-eth"; - reg = <0x00400000 10000>; - - #address-cells = <1>; - #size-cells = <0>; - - resets = <&rstctrl 18>; - reset-names = "fe"; - - interrupt-parent = <&cpuintc>; - interrupts = <5>; - - port@0 { - compatible = "ralink,eth-port"; - reg = <0>; - phy-handle = <&phy0>; - }; - -}; diff --git a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt deleted file mode 100644 index 87e315856efa0..0000000000000 --- a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt +++ /dev/null @@ -1,30 +0,0 @@ -Ralink Fast Ethernet Embedded Switch -==================================== - -The ralink fast ethernet embedded switch can be found on Ralink and Mediatek -SoCs (RT3x5x, RT5350, MT76x8). - -Required properties: -- compatible: Should be "ralink,rt3050-esw" -- reg: Address and length of the register set for the device -- interrupts: Should contain the embedded switches interrupt -- resets: Should contain the embedded switches resets -- reset-names: Should contain the reset names "esw" - -Optional properties: -- ralink,portmap: can be used to choose if the default switch setup is - llllw or wllll -- ralink,led_polarity: override the active high/low settings of the leds - -Example: - -esw@10110000 { - compatible = "ralink,rt3050-esw"; - reg = <0x10110000 8000>; - - resets = <&rstctrl 23>; - reset-names = "esw"; - - interrupt-parent = <&intc>; - interrupts = <17>; -}; diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts index 24eebc5a85b1d..0128bd8fa7eda 100644 --- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts +++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts @@ -20,12 +20,6 @@ bootargs = "console=ttyS0,57600"; }; - palmbus: palmbus@1e000000 { - i2c@900 { - status = "okay"; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -53,7 +47,7 @@ }; }; -&sdhci { +&mmc { status = "okay"; }; diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts index 34006e6677806..7515555388ae9 100644 --- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts +++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts @@ -20,12 +20,6 @@ bootargs = "console=ttyS0,57600"; }; - palmbus: palmbus@1e000000 { - i2c@900 { - status = "okay"; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -35,9 +29,45 @@ linux,code = ; }; }; + + gpio-leds { + compatible = "gpio-leds"; + + ethblack-green { + label = "green:ethblack"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + ethblue-green { + label = "green:ethblue"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + ethyellow-green { + label = "green:ethyellow"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + ethyellow-orange { + label = "orange:ethyellow"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + power { + label = "green:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + system { + label = "green:system"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + }; + }; }; -&sdhci { +&mmc { status = "okay"; }; @@ -83,12 +113,12 @@ &gmac1 { status = "okay"; - phy-handle = <ðphy7>; + phy-handle = <ðphy5>; }; &mdio { - ethphy7: ethernet-phy@7 { - reg = <7>; + ethphy5: ethernet-phy@5 { + reg = <5>; phy-mode = "rgmii-rxid"; }; }; diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi index ee46ace0bcc11..f3f4c1f26e019 100644 --- a/arch/mips/boot/dts/ralink/mt7621.dtsi +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi @@ -33,11 +33,6 @@ compatible = "mti,cpu-interrupt-controller"; }; - aliases { - serial0 = &uartlite; - }; - - mmc_fixed_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "mmc_power"; @@ -110,17 +105,16 @@ pinctrl-0 = <&i2c_pins>; }; - memc: syscon@5000 { + memc: memory-controller@5000 { compatible = "mediatek,mt7621-memc", "syscon"; reg = <0x5000 0x1000>; }; - uartlite: uartlite@c00 { + serial0: serial@c00 { compatible = "ns16550a"; reg = <0xc00 0x100>; clocks = <&sysc MT7621_CLK_UART1>; - clock-names = "uart1"; interrupt-parent = <&gic>; interrupts = ; @@ -236,7 +230,7 @@ }; }; - sdhci: sdhci@1e130000 { + mmc: mmc@1e130000 { status = "disabled"; compatible = "mediatek,mt7620-mmc"; @@ -262,8 +256,8 @@ interrupts = ; }; - xhci: xhci@1e1c0000 { - compatible = "mediatek,mt8173-xhci"; + usb: usb@1e1c0000 { + compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci"; reg = <0x1e1c0000 0x1000 0x1e1d0700 0x0100>; reg-names = "mac", "ippc"; @@ -338,23 +332,22 @@ gmac1: mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; - status = "off"; - phy-mode = "rgmii-rxid"; + status = "disabled"; + phy-mode = "rgmii"; }; mdio: mdio-bus { #address-cells = <1>; #size-cells = <0>; - switch0: switch0@0 { + switch0: switch@1f { compatible = "mediatek,mt7621"; - reg = <0>; + reg = <0x1f>; mediatek,mcm; resets = <&sysc MT7621_RST_MCM>; reset-names = "mcm"; interrupt-controller; #interrupt-cells = <1>; - interrupt-parent = <&gic>; interrupts = ; ports { @@ -362,31 +355,31 @@ #size-cells = <0>; port@0 { - status = "off"; + status = "disabled"; reg = <0>; label = "lan0"; }; port@1 { - status = "off"; + status = "disabled"; reg = <1>; label = "lan1"; }; port@2 { - status = "off"; + status = "disabled"; reg = <2>; label = "lan2"; }; port@3 { - status = "off"; + status = "disabled"; reg = <3>; label = "lan3"; }; port@4 { - status = "off"; + status = "disabled"; reg = <4>; label = "lan4"; };