From 7500673be30f9467cd1a0e065c93e75c5213b44d Mon Sep 17 00:00:00 2001 From: Tushar Dave Date: Tue, 12 Jun 2012 13:03:29 +0000 Subject: [PATCH 1/9] e1000: Combining Bitwise OR in one expression. Signed-off-by: Tushar Dave Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000_main.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 7483ca0a6282f..183a4a3224ba8 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -1078,18 +1078,18 @@ static int __devinit e1000_probe(struct pci_dev *pdev, netdev->priv_flags |= IFF_SUPP_NOFCS; netdev->features |= netdev->hw_features; - netdev->hw_features |= NETIF_F_RXCSUM; - netdev->hw_features |= NETIF_F_RXALL; - netdev->hw_features |= NETIF_F_RXFCS; + netdev->hw_features |= (NETIF_F_RXCSUM | + NETIF_F_RXALL | + NETIF_F_RXFCS); if (pci_using_dac) { netdev->features |= NETIF_F_HIGHDMA; netdev->vlan_features |= NETIF_F_HIGHDMA; } - netdev->vlan_features |= NETIF_F_TSO; - netdev->vlan_features |= NETIF_F_HW_CSUM; - netdev->vlan_features |= NETIF_F_SG; + netdev->vlan_features |= (NETIF_F_TSO | + NETIF_F_HW_CSUM | + NETIF_F_SG); netdev->priv_flags |= IFF_UNICAST_FLT; From f00b0da776fda1abc481578e3932a668f603d72d Mon Sep 17 00:00:00 2001 From: Lior Levy Date: Sat, 4 Jun 2011 06:05:03 +0000 Subject: [PATCH 2/9] igb: A fix to VF TX rate limit There is a need to configure MMW_SIZE in register RTTBCNRM with a correct value. For 82576 device, the value should be 0x14. Signed-off-by: Lior Levy Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/e1000_regs.h | 1 + drivers/net/ethernet/intel/igb/igb_main.c | 5 +++++ 2 files changed, 6 insertions(+) diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h index 35d1e4f2c92c1..10efcd88dca00 100644 --- a/drivers/net/ethernet/intel/igb/e1000_regs.h +++ b/drivers/net/ethernet/intel/igb/e1000_regs.h @@ -117,6 +117,7 @@ /* TX Rate Limit Registers */ #define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select - WO */ +#define E1000_RTTBCNRM 0x3690 /* Tx BCN Rate-scheduler MMW */ #define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config - WO */ /* Split and Replication RX Control - RW */ diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index dd3bfe8cd36c7..64090549722d2 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -6997,6 +6997,11 @@ static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate, } wr32(E1000_RTTDQSEL, vf); /* vf X uses queue X */ + /* + * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM + * register. MMW_SIZE=0x014 if 9728-byte jumbo is supported. + */ + wr32(E1000_RTTBCNRM, 0x14); wr32(E1000_RTTBCNRC, bcnrc_val); } From d3eef8c8a033a5ee56ab5d923068eb8cd5d53887 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Wed, 16 May 2012 01:46:00 +0000 Subject: [PATCH 3/9] igb: Add switch case for supported hardware to igb_ptp_remove. PTP initialization is only done on supported parts, so remove needs same checks or it will cause crashes on systems with igb devices that don't support PTP. This patch adds those checks to the exit function. Signed-off-by: Carolyn Wyborny Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_ptp.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index d5ee7fa50723c..c846ea9131a3a 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -330,7 +330,17 @@ void igb_ptp_init(struct igb_adapter *adapter) void igb_ptp_remove(struct igb_adapter *adapter) { - cancel_delayed_work_sync(&adapter->overflow_work); + switch (adapter->hw.mac.type) { + case e1000_i211: + case e1000_i210: + case e1000_i350: + case e1000_82580: + case e1000_82576: + cancel_delayed_work_sync(&adapter->overflow_work); + break; + default: + return; + } if (adapter->ptp_clock) { ptp_clock_unregister(adapter->ptp_clock); From cb41145ee78585282af56a9203f391c0d84366b1 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Wed, 4 Apr 2012 17:43:59 +0000 Subject: [PATCH 4/9] igb: Support the get_ts_info ethtool method. Based on original patch from Richard Cochran Original patch caused build errors without CONFIG_IGB_1588_CLOCK and CONFIG_PPS enabled, since the added code was not properly wrapped. CC: Richard Cochran Signed-off-by: Carolyn Wyborny Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 35 ++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 812d4f963bd11..59d0f04d59af2 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -2271,6 +2271,38 @@ static void igb_ethtool_complete(struct net_device *netdev) pm_runtime_put(&adapter->pdev->dev); } +#ifdef CONFIG_IGB_PTP +static int igb_ethtool_get_ts_info(struct net_device *dev, + struct ethtool_ts_info *info) +{ + struct igb_adapter *adapter = netdev_priv(dev); + + info->so_timestamping = + SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE; + + if (adapter->ptp_clock) + info->phc_index = ptp_clock_index(adapter->ptp_clock); + else + info->phc_index = -1; + + info->tx_types = + (1 << HWTSTAMP_TX_OFF) | + (1 << HWTSTAMP_TX_ON); + + info->rx_filters = + (1 << HWTSTAMP_FILTER_NONE) | + (1 << HWTSTAMP_FILTER_ALL) | + (1 << HWTSTAMP_FILTER_SOME) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_EVENT); + + return 0; +} + +#endif static const struct ethtool_ops igb_ethtool_ops = { .get_settings = igb_get_settings, .set_settings = igb_set_settings, @@ -2299,6 +2331,9 @@ static const struct ethtool_ops igb_ethtool_ops = { .set_coalesce = igb_set_coalesce, .begin = igb_ethtool_begin, .complete = igb_ethtool_complete, +#ifdef CONFIG_IGB_PTP + .get_ts_info = igb_ethtool_get_ts_info, +#endif }; void igb_set_ethtool_ops(struct net_device *netdev) From 374a542dee0a10c5f81edc2af17a97b06805ecd9 Mon Sep 17 00:00:00 2001 From: Matthew Vick Date: Fri, 18 May 2012 04:54:58 +0000 Subject: [PATCH 5/9] igb: Streamline RSS queue and queue pairing assignment logic. Rather than spread out the complexity of the RSS queue and queue pairing assignment logic, place it all in one location for simplicity and readability. Signed-off-by: Matthew Vick Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb.h | 9 +-- drivers/net/ethernet/intel/igb/igb_main.c | 79 +++++++++++++++-------- 2 files changed, 55 insertions(+), 33 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index ae6d3f393a547..3ced7b546f7fc 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -65,13 +65,10 @@ struct igb_adapter; #define MAX_Q_VECTORS 8 /* Transmit and receive queues */ -#define IGB_MAX_RX_QUEUES ((adapter->vfs_allocated_count ? 2 : \ - (hw->mac.type > e1000_82575 ? 8 : 4))) -#define IGB_MAX_RX_QUEUES_I210 4 +#define IGB_MAX_RX_QUEUES 8 +#define IGB_MAX_RX_QUEUES_82575 4 #define IGB_MAX_RX_QUEUES_I211 2 -#define IGB_MAX_TX_QUEUES 16 -#define IGB_MAX_TX_QUEUES_I210 4 -#define IGB_MAX_TX_QUEUES_I211 2 +#define IGB_MAX_TX_QUEUES 8 #define IGB_MAX_VF_MC_ENTRIES 30 #define IGB_MAX_VF_FUNCTIONS 8 #define IGB_MAX_VFTA_ENTRIES 128 diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 64090549722d2..a7c9c5d77e0b3 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1048,11 +1048,6 @@ static int igb_set_interrupt_capability(struct igb_adapter *adapter) if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) numvecs += adapter->num_tx_queues; - /* i210 and i211 can only have 4 MSIX vectors for rx/tx queues. */ - if ((adapter->hw.mac.type == e1000_i210) - || (adapter->hw.mac.type == e1000_i211)) - numvecs = 4; - /* store the number of vectors reserved for queues */ adapter->num_q_vectors = numvecs; @@ -2338,6 +2333,7 @@ static int __devinit igb_sw_init(struct igb_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; + u32 max_rss_queues; pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word); @@ -2370,40 +2366,69 @@ static int __devinit igb_sw_init(struct igb_adapter *adapter) } else adapter->vfs_allocated_count = max_vfs; break; - case e1000_i210: - case e1000_i211: - adapter->vfs_allocated_count = 0; - break; default: break; } #endif /* CONFIG_PCI_IOV */ + + /* Determine the maximum number of RSS queues supported. */ switch (hw->mac.type) { + case e1000_i211: + max_rss_queues = IGB_MAX_RX_QUEUES_I211; + break; + case e1000_82575: case e1000_i210: - adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES_I210, - num_online_cpus()); + max_rss_queues = IGB_MAX_RX_QUEUES_82575; + break; + case e1000_i350: + /* I350 cannot do RSS and SR-IOV at the same time */ + if (!!adapter->vfs_allocated_count) { + max_rss_queues = 1; + break; + } + /* fall through */ + case e1000_82576: + if (!!adapter->vfs_allocated_count) { + max_rss_queues = 2; + break; + } + /* fall through */ + case e1000_82580: + default: + max_rss_queues = IGB_MAX_RX_QUEUES; break; + } + + adapter->rss_queues = min_t(u32, max_rss_queues, num_online_cpus()); + + /* Determine if we need to pair queues. */ + switch (hw->mac.type) { + case e1000_82575: case e1000_i211: - adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES_I211, - num_online_cpus()); + /* Device supports enough interrupts without queue pairing. */ break; + case e1000_82576: + /* + * If VFs are going to be allocated with RSS queues then we + * should pair the queues in order to conserve interrupts due + * to limited supply. + */ + if ((adapter->rss_queues > 1) && + (adapter->vfs_allocated_count > 6)) + adapter->flags |= IGB_FLAG_QUEUE_PAIRS; + /* fall through */ + case e1000_82580: + case e1000_i350: + case e1000_i210: default: - adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES, - num_online_cpus()); + /* + * If rss_queues > half of max_rss_queues, pair the queues in + * order to conserve interrupts due to limited supply. + */ + if (adapter->rss_queues > (max_rss_queues / 2)) + adapter->flags |= IGB_FLAG_QUEUE_PAIRS; break; } - /* i350 cannot do RSS and SR-IOV at the same time */ - if (hw->mac.type == e1000_i350 && adapter->vfs_allocated_count) - adapter->rss_queues = 1; - - /* - * if rss_queues > 4 or vfs are going to be allocated with rss_queues - * then we should combine the queues into a queue pair in order to - * conserve interrupts due to limited supply - */ - if ((adapter->rss_queues > 4) || - ((adapter->rss_queues > 1) && (adapter->vfs_allocated_count > 6))) - adapter->flags |= IGB_FLAG_QUEUE_PAIRS; /* Setup and initialize a copy of the hw vlan table array */ adapter->shadow_vfta = kzalloc(sizeof(u32) * From d67974f0deb1f309fc13821f45e52c63402bfb24 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Thu, 14 Jun 2012 16:04:19 +0000 Subject: [PATCH 6/9] igb: Update firmware info output Our NVM image creation tools have evolved over the years and there are multiple versions contained in them, depending on the tool used to create them. This patch outputs the NVM versions available in ethtool -i output. rc2: (not sure why others show in log but not in the message) Added additional call to igb_set_fw_version per Community feedback. Signed-off-by: Carolyn Wyborny Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb.h | 16 +++++ drivers/net/ethernet/intel/igb/igb_ethtool.c | 17 +++-- drivers/net/ethernet/intel/igb/igb_main.c | 66 ++++++++++++++++++++ 3 files changed, 89 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index 3ced7b546f7fc..9e572dd29ab28 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -75,6 +75,20 @@ struct igb_adapter; #define IGB_82576_VF_DEV_ID 0x10CA #define IGB_I350_VF_DEV_ID 0x1520 +/* NVM version defines */ +#define IGB_MAJOR_MASK 0xF000 +#define IGB_MINOR_MASK 0x0FF0 +#define IGB_BUILD_MASK 0x000F +#define IGB_COMB_VER_MASK 0x00FF +#define IGB_MAJOR_SHIFT 12 +#define IGB_MINOR_SHIFT 4 +#define IGB_COMB_VER_SHFT 8 +#define IGB_NVM_VER_INVALID 0xFFFF +#define IGB_ETRACK_SHIFT 16 +#define NVM_ETRACK_WORD 0x0042 +#define NVM_COMB_VER_OFF 0x0083 +#define NVM_COMB_VER_PTR 0x003d + struct vf_data_storage { unsigned char vf_mac_addresses[ETH_ALEN]; u16 vf_mc_hashes[IGB_MAX_VF_MC_ENTRIES]; @@ -368,6 +382,7 @@ struct igb_adapter { spinlock_t tmreg_lock; struct cyclecounter cc; struct timecounter tc; + char fw_version[32]; }; #define IGB_FLAG_HAS_MSI (1 << 0) @@ -417,6 +432,7 @@ extern void igb_update_stats(struct igb_adapter *, struct rtnl_link_stats64 *); extern bool igb_has_link(struct igb_adapter *adapter); extern void igb_set_ethtool_ops(struct net_device *); extern void igb_power_up_link(struct igb_adapter *); +extern void igb_set_fw_version(struct igb_adapter *); #ifdef CONFIG_IGB_PTP extern void igb_ptp_init(struct igb_adapter *adapter); extern void igb_ptp_remove(struct igb_adapter *adapter); diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 59d0f04d59af2..a19c84cad0e99 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -710,6 +710,7 @@ static int igb_set_eeprom(struct net_device *netdev, if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG))) hw->nvm.ops.update(hw); + igb_set_fw_version(adapter); kfree(eeprom_buff); return ret_val; } @@ -718,20 +719,16 @@ static void igb_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { struct igb_adapter *adapter = netdev_priv(netdev); - u16 eeprom_data; strlcpy(drvinfo->driver, igb_driver_name, sizeof(drvinfo->driver)); strlcpy(drvinfo->version, igb_driver_version, sizeof(drvinfo->version)); - /* EEPROM image version # is reported as firmware version # for - * 82575 controllers */ - adapter->hw.nvm.ops.read(&adapter->hw, 5, 1, &eeprom_data); - snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), - "%d.%d-%d", - (eeprom_data & 0xF000) >> 12, - (eeprom_data & 0x0FF0) >> 4, - eeprom_data & 0x000F); - + /* + * EEPROM image version # is reported as firmware version # for + * 82575 controllers + */ + strlcpy(drvinfo->fw_version, adapter->fw_version, + sizeof(drvinfo->fw_version)); strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), sizeof(drvinfo->bus_info)); drvinfo->n_stats = IGB_STATS_LEN; diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index a7c9c5d77e0b3..1e0b94ba2ef18 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1815,6 +1815,69 @@ static const struct net_device_ops igb_netdev_ops = { .ndo_set_features = igb_set_features, }; +/** + * igb_set_fw_version - Configure version string for ethtool + * @adapter: adapter struct + * + **/ +void igb_set_fw_version(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u16 eeprom_verh, eeprom_verl, comb_verh, comb_verl, comb_offset; + u16 major, build, patch, fw_version; + u32 etrack_id; + + hw->nvm.ops.read(hw, 5, 1, &fw_version); + if (adapter->hw.mac.type != e1000_i211) { + hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verh); + hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verl); + etrack_id = (eeprom_verh << IGB_ETRACK_SHIFT) | eeprom_verl; + + /* combo image version needs to be found */ + hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset); + if ((comb_offset != 0x0) && + (comb_offset != IGB_NVM_VER_INVALID)) { + hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset + + 1), 1, &comb_verh); + hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset), + 1, &comb_verl); + + /* Only display Option Rom if it exists and is valid */ + if ((comb_verh && comb_verl) && + ((comb_verh != IGB_NVM_VER_INVALID) && + (comb_verl != IGB_NVM_VER_INVALID))) { + major = comb_verl >> IGB_COMB_VER_SHFT; + build = (comb_verl << IGB_COMB_VER_SHFT) | + (comb_verh >> IGB_COMB_VER_SHFT); + patch = comb_verh & IGB_COMB_VER_MASK; + snprintf(adapter->fw_version, + sizeof(adapter->fw_version), + "%d.%d%d, 0x%08x, %d.%d.%d", + (fw_version & IGB_MAJOR_MASK) >> + IGB_MAJOR_SHIFT, + (fw_version & IGB_MINOR_MASK) >> + IGB_MINOR_SHIFT, + (fw_version & IGB_BUILD_MASK), + etrack_id, major, build, patch); + goto out; + } + } + snprintf(adapter->fw_version, sizeof(adapter->fw_version), + "%d.%d%d, 0x%08x", + (fw_version & IGB_MAJOR_MASK) >> IGB_MAJOR_SHIFT, + (fw_version & IGB_MINOR_MASK) >> IGB_MINOR_SHIFT, + (fw_version & IGB_BUILD_MASK), etrack_id); + } else { + snprintf(adapter->fw_version, sizeof(adapter->fw_version), + "%d.%d%d", + (fw_version & IGB_MAJOR_MASK) >> IGB_MAJOR_SHIFT, + (fw_version & IGB_MINOR_MASK) >> IGB_MINOR_SHIFT, + (fw_version & IGB_BUILD_MASK)); + } +out: + return; +} + /** * igb_probe - Device Initialization Routine * @pdev: PCI device information struct @@ -2025,6 +2088,9 @@ static int __devinit igb_probe(struct pci_dev *pdev, goto err_eeprom; } + /* get firmware version for ethtool -i */ + igb_set_fw_version(adapter); + setup_timer(&adapter->watchdog_timer, igb_watchdog, (unsigned long) adapter); setup_timer(&adapter->phy_info_timer, igb_update_phy_info, From 200e5fd50ee80ec6ab3156bdbc46a41da0a82d10 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Thu, 31 May 2012 23:39:30 +0000 Subject: [PATCH 7/9] igb: Version bump This patch updates the igb version to 4.0.1. Signed-off-by: Carolyn Wyborny Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 1e0b94ba2ef18..01ced68d3aac4 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -59,9 +59,9 @@ #endif #include "igb.h" -#define MAJ 3 -#define MIN 4 -#define BUILD 7 +#define MAJ 4 +#define MIN 0 +#define BUILD 1 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \ __stringify(BUILD) "-k" char igb_driver_name[] = "igb"; From a49fda3eaa4fe70fdd14681060a7c6c6246dc927 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Fri, 8 Jun 2012 06:59:09 +0000 Subject: [PATCH 8/9] ixgbe: add support for 1G SX modules This patch adds support for 1G Fiber PHY modules (SFP+ modules). This support comes along side support for 1G Copper PHY modules, but uses a different PHY type (ixgbe_sfp_type_1g_sx_core). Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- .../net/ethernet/intel/ixgbe/ixgbe_82599.c | 4 +++- drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 23 +++++++++++++++---- drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 2 ++ 3 files changed, 24 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index dee64d2703f00..e7dddfd97cb99 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -241,7 +241,9 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, /* Determine 1G link capabilities off of SFP+ type */ if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) { + hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { *speed = IXGBE_LINK_SPEED_1GB_FULL; *negotiation = true; goto out; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index 24117709d6a21..71659edf81aaf 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -907,6 +907,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) * 8 SFP_act_lmt_DA_CORE1 - 82599-specific * 9 SFP_1g_cu_CORE0 - 82599-specific * 10 SFP_1g_cu_CORE1 - 82599-specific + * 11 SFP_1g_sx_CORE0 - 82599-specific + * 12 SFP_1g_sx_CORE1 - 82599-specific */ if (hw->mac.type == ixgbe_mac_82598EB) { if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) @@ -957,6 +959,13 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) else hw->phy.sfp_type = ixgbe_sfp_type_1g_cu_core1; + } else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_1g_sx_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_1g_sx_core1; } else { hw->phy.sfp_type = ixgbe_sfp_type_unknown; } @@ -1049,7 +1058,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) /* Verify supported 1G SFP modules */ if (comp_codes_10g == 0 && !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0)) { + hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) { hw->phy.type = ixgbe_phy_sfp_unsupported; status = IXGBE_ERR_SFP_NOT_SUPPORTED; goto out; @@ -1064,7 +1075,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) hw->mac.ops.get_device_caps(hw, &enforce_sfp); if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) && !((hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0) || - (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1))) { + (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) || + (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0) || + (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1))) { /* Make sure we're a supported PHY type */ if (hw->phy.type == ixgbe_phy_sfp_intel) { status = 0; @@ -1128,10 +1141,12 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, * SR modules */ if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 || - sfp_type == ixgbe_sfp_type_1g_cu_core0) + sfp_type == ixgbe_sfp_type_1g_cu_core0 || + sfp_type == ixgbe_sfp_type_1g_sx_core0) sfp_type = ixgbe_sfp_type_srlr_core0; else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 || - sfp_type == ixgbe_sfp_type_1g_cu_core1) + sfp_type == ixgbe_sfp_type_1g_cu_core1 || + sfp_type == ixgbe_sfp_type_1g_sx_core1) sfp_type = ixgbe_sfp_type_srlr_core1; /* Read offset to PHY init contents */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 1085c0739a3cd..7416d22ec2278 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -2604,6 +2604,8 @@ enum ixgbe_sfp_type { ixgbe_sfp_type_da_act_lmt_core1 = 8, ixgbe_sfp_type_1g_cu_core0 = 9, ixgbe_sfp_type_1g_cu_core1 = 10, + ixgbe_sfp_type_1g_sx_core0 = 11, + ixgbe_sfp_type_1g_sx_core1 = 12, ixgbe_sfp_type_not_present = 0xFFFE, ixgbe_sfp_type_unknown = 0xFFFF }; From db01896398ae6beba41fc14f1a90d55fd21e6738 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Fri, 8 Jun 2012 06:59:17 +0000 Subject: [PATCH 9/9] ixgbe: clean up ixgbe_get_settings ethtool function This patch cleans up the method used for determining the link speed of devices. The old method re-wrote some logic already existing in a mac.ops function which should be used instead. The result is much simpler to understand and removes a strange double-check of logic, as well as reducing code redundancy. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- .../net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 147 ++++++++---------- 1 file changed, 62 insertions(+), 85 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 3178f1ec37115..bbc7da5cdb4d6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -154,100 +154,60 @@ static int ixgbe_get_settings(struct net_device *netdev, { struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; + ixgbe_link_speed supported_link; u32 link_speed = 0; + bool autoneg; bool link_up; - ecmd->supported = SUPPORTED_10000baseT_Full; - ecmd->autoneg = AUTONEG_ENABLE; - ecmd->transceiver = XCVR_EXTERNAL; - if ((hw->phy.media_type == ixgbe_media_type_copper) || - (hw->phy.multispeed_fiber)) { - ecmd->supported |= (SUPPORTED_1000baseT_Full | - SUPPORTED_Autoneg); - - switch (hw->mac.type) { - case ixgbe_mac_X540: - ecmd->supported |= SUPPORTED_100baseT_Full; - break; - default: - break; - } - - ecmd->advertising = ADVERTISED_Autoneg; - if (hw->phy.autoneg_advertised) { - if (hw->phy.autoneg_advertised & - IXGBE_LINK_SPEED_100_FULL) - ecmd->advertising |= ADVERTISED_100baseT_Full; - if (hw->phy.autoneg_advertised & - IXGBE_LINK_SPEED_10GB_FULL) - ecmd->advertising |= ADVERTISED_10000baseT_Full; - if (hw->phy.autoneg_advertised & - IXGBE_LINK_SPEED_1GB_FULL) - ecmd->advertising |= ADVERTISED_1000baseT_Full; - } else { - /* - * Default advertised modes in case - * phy.autoneg_advertised isn't set. - */ - ecmd->advertising |= (ADVERTISED_10000baseT_Full | - ADVERTISED_1000baseT_Full); - if (hw->mac.type == ixgbe_mac_X540) - ecmd->advertising |= ADVERTISED_100baseT_Full; - } - - if (hw->phy.media_type == ixgbe_media_type_copper) { - ecmd->supported |= SUPPORTED_TP; - ecmd->advertising |= ADVERTISED_TP; - ecmd->port = PORT_TP; - } else { - ecmd->supported |= SUPPORTED_FIBRE; - ecmd->advertising |= ADVERTISED_FIBRE; - ecmd->port = PORT_FIBRE; - } - } else if (hw->phy.media_type == ixgbe_media_type_backplane) { - /* Set as FIBRE until SERDES defined in kernel */ - if (hw->device_id == IXGBE_DEV_ID_82598_BX) { - ecmd->supported = (SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE); - ecmd->advertising = (ADVERTISED_1000baseT_Full | - ADVERTISED_FIBRE); - ecmd->port = PORT_FIBRE; - ecmd->autoneg = AUTONEG_DISABLE; - } else if ((hw->device_id == IXGBE_DEV_ID_82599_COMBO_BACKPLANE) || - (hw->device_id == IXGBE_DEV_ID_82599_KX4_MEZZ)) { - ecmd->supported |= (SUPPORTED_1000baseT_Full | - SUPPORTED_Autoneg | - SUPPORTED_FIBRE); - ecmd->advertising = (ADVERTISED_10000baseT_Full | - ADVERTISED_1000baseT_Full | - ADVERTISED_Autoneg | - ADVERTISED_FIBRE); - ecmd->port = PORT_FIBRE; - } else { - ecmd->supported |= (SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE); - ecmd->advertising = (ADVERTISED_10000baseT_Full | - ADVERTISED_1000baseT_Full | - ADVERTISED_FIBRE); - ecmd->port = PORT_FIBRE; - } + hw->mac.ops.get_link_capabilities(hw, &supported_link, &autoneg); + + /* set the supported link speeds */ + if (supported_link & IXGBE_LINK_SPEED_10GB_FULL) + ecmd->supported |= SUPPORTED_10000baseT_Full; + if (supported_link & IXGBE_LINK_SPEED_1GB_FULL) + ecmd->supported |= SUPPORTED_1000baseT_Full; + if (supported_link & IXGBE_LINK_SPEED_100_FULL) + ecmd->supported |= SUPPORTED_100baseT_Full; + + /* set the advertised speeds */ + if (hw->phy.autoneg_advertised) { + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) + ecmd->advertising |= ADVERTISED_100baseT_Full; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) + ecmd->advertising |= ADVERTISED_10000baseT_Full; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) + ecmd->advertising |= ADVERTISED_1000baseT_Full; } else { - ecmd->supported |= SUPPORTED_FIBRE; - ecmd->advertising = (ADVERTISED_10000baseT_Full | - ADVERTISED_FIBRE); - ecmd->port = PORT_FIBRE; - ecmd->autoneg = AUTONEG_DISABLE; + /* default modes in case phy.autoneg_advertised isn't set */ + if (supported_link & IXGBE_LINK_SPEED_10GB_FULL) + ecmd->advertising |= ADVERTISED_10000baseT_Full; + if (supported_link & IXGBE_LINK_SPEED_1GB_FULL) + ecmd->advertising |= ADVERTISED_1000baseT_Full; + if (supported_link & IXGBE_LINK_SPEED_100_FULL) + ecmd->advertising |= ADVERTISED_100baseT_Full; } - /* Get PHY type */ + if (autoneg) { + ecmd->supported |= SUPPORTED_Autoneg; + ecmd->advertising |= ADVERTISED_Autoneg; + ecmd->autoneg = AUTONEG_ENABLE; + } else + ecmd->autoneg = AUTONEG_DISABLE; + + ecmd->transceiver = XCVR_EXTERNAL; + + /* Determine the remaining settings based on the PHY type. */ switch (adapter->hw.phy.type) { case ixgbe_phy_tn: case ixgbe_phy_aq: case ixgbe_phy_cu_unknown: - /* Copper 10G-BASET */ + ecmd->supported |= SUPPORTED_TP; + ecmd->advertising |= ADVERTISED_TP; ecmd->port = PORT_TP; break; case ixgbe_phy_qt: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; ecmd->port = PORT_FIBRE; break; case ixgbe_phy_nl: @@ -257,42 +217,59 @@ static int ixgbe_get_settings(struct net_device *netdev, case ixgbe_phy_sfp_avago: case ixgbe_phy_sfp_intel: case ixgbe_phy_sfp_unknown: - switch (adapter->hw.phy.sfp_type) { /* SFP+ devices, further checking needed */ + switch (adapter->hw.phy.sfp_type) { case ixgbe_sfp_type_da_cu: case ixgbe_sfp_type_da_cu_core0: case ixgbe_sfp_type_da_cu_core1: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; ecmd->port = PORT_DA; break; case ixgbe_sfp_type_sr: case ixgbe_sfp_type_lr: case ixgbe_sfp_type_srlr_core0: case ixgbe_sfp_type_srlr_core1: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; ecmd->port = PORT_FIBRE; break; case ixgbe_sfp_type_not_present: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; ecmd->port = PORT_NONE; break; case ixgbe_sfp_type_1g_cu_core0: case ixgbe_sfp_type_1g_cu_core1: + ecmd->supported |= SUPPORTED_TP; + ecmd->advertising |= ADVERTISED_TP; ecmd->port = PORT_TP; - ecmd->supported = SUPPORTED_TP; - ecmd->advertising = (ADVERTISED_1000baseT_Full | - ADVERTISED_TP); + break; + case ixgbe_sfp_type_1g_sx_core0: + case ixgbe_sfp_type_1g_sx_core1: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; + ecmd->port = PORT_FIBRE; break; case ixgbe_sfp_type_unknown: default: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; ecmd->port = PORT_OTHER; break; } break; case ixgbe_phy_xaui: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; ecmd->port = PORT_NONE; break; case ixgbe_phy_unknown: case ixgbe_phy_generic: case ixgbe_phy_sfp_unsupported: default: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; ecmd->port = PORT_OTHER; break; }