From 2ffc224f3ab047f16d2dc73b90a6fe148c03f946 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 16 Mar 2016 10:03:09 +0900 Subject: [PATCH 01/88] ARM: dts: lager: use generic pinctrl properties Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the lager device tree to use the generic rather than renesas-specific properties. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven Acked-by: Laurent Pinchart --- arch/arm/boot/dts/r8a7790-lager.dts | 92 ++++++++++++++--------------- 1 file changed, 46 insertions(+), 46 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index aa6ca92a9485b..a5828721ab7c3 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -314,119 +314,119 @@ pinctrl-names = "default"; du_pins: du { - renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; - renesas,function = "du"; + groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; + function = "du"; }; scif0_pins: serial0 { - renesas,groups = "scif0_data"; - renesas,function = "scif0"; + groups = "scif0_data"; + function = "scif0"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq0"; - renesas,function = "intc"; + groups = "intc_irq0"; + function = "intc"; }; scifa1_pins: serial1 { - renesas,groups = "scifa1_data"; - renesas,function = "scifa1"; + groups = "scifa1_data"; + function = "scifa1"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; }; sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; }; mmc1_pins: mmc1 { - renesas,groups = "mmc1_data8", "mmc1_ctrl"; - renesas,function = "mmc1"; + groups = "mmc1_data8", "mmc1_ctrl"; + function = "mmc1"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; msiof1_pins: spi2 { - renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", + groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", "msiof1_tx"; - renesas,function = "msiof1"; + function = "msiof1"; }; i2c0_pins: i2c0 { - renesas,groups = "i2c0"; - renesas,function = "i2c0"; + groups = "i2c0"; + function = "i2c0"; }; iic0_pins: iic0 { - renesas,groups = "iic0"; - renesas,function = "iic0"; + groups = "iic0"; + function = "iic0"; }; iic1_pins: iic1 { - renesas,groups = "iic1"; - renesas,function = "iic1"; + groups = "iic1"; + function = "iic1"; }; iic2_pins: iic2 { - renesas,groups = "iic2"; - renesas,function = "iic2"; + groups = "iic2"; + function = "iic2"; }; iic3_pins: iic3 { - renesas,groups = "iic3"; - renesas,function = "iic3"; + groups = "iic3"; + function = "iic3"; }; hsusb_pins: hsusb { - renesas,groups = "usb0_ovc_vbus"; - renesas,function = "usb0"; + groups = "usb0_ovc_vbus"; + function = "usb0"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; usb2_pins: usb2 { - renesas,groups = "usb2"; - renesas,function = "usb2"; + groups = "usb2"; + function = "usb2"; }; vin1_pins: vin { - renesas,groups = "vin1_data8", "vin1_clk"; - renesas,function = "vin1"; + groups = "vin1_data8", "vin1_clk"; + function = "vin1"; }; sound_pins: sound { - renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; - renesas,function = "ssi"; + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; sound_clk_pins: sound_clk { - renesas,groups = "audio_clk_a"; - renesas,function = "audio_clk"; + groups = "audio_clk_a"; + function = "audio_clk"; }; }; From a32f5cff122b41f01a4ed18a9007871344b651c3 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 07:52:11 +0900 Subject: [PATCH 02/88] ARM: dts: ape6evm: use generic pinctrl properties Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the ape6evm device tree to use the generic properties. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a73a4-ape6evm.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 5902570957004..93ace33e3e361 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -189,28 +189,28 @@ &pfc { scifa0_pins: serial0 { - renesas,groups = "scifa0_data"; - renesas,function = "scifa0"; + groups = "scifa0_data"; + function = "scifa0"; }; mmc0_pins: mmc { - renesas,groups = "mmc0_data8", "mmc0_ctrl"; - renesas,function = "mmc0"; + groups = "mmc0_data8", "mmc0_ctrl"; + function = "mmc0"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; + function = "sdhi0"; }; sdhi1_pins: sd1 { - renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; - renesas,function = "sdhi1"; + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; }; keyboard_pins: keyboard { - renesas,pins = "PORT324", "PORT325", "PORT326", "PORT327", - "PORT328", "PORT329"; + pins = "PORT324", "PORT325", "PORT326", "PORT327", "PORT328", + "PORT329"; bias-pull-up; }; }; From 1ba1e26ededf070da2b1af117f912d2d9f05accf Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 07:53:17 +0900 Subject: [PATCH 03/88] ARM: dts: armadillo800eva: use generic pinctrl properties Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the armadillo800eva device tree to use the generic properties. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 34 +++++++++---------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index c548cabb102f5..2c82dab2b6f45 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -228,44 +228,44 @@ pinctrl-names = "default"; ether_pins: ether { - renesas,groups = "gether_mii", "gether_int"; - renesas,function = "gether"; + groups = "gether_mii", "gether_int"; + function = "gether"; }; scifa1_pins: serial1 { - renesas,groups = "scifa1_data"; - renesas,function = "scifa1"; + groups = "scifa1_data"; + function = "scifa1"; }; st1232_pins: touchscreen { - renesas,groups = "intc_irq10"; - renesas,function = "intc"; + groups = "intc_irq10"; + function = "intc"; }; backlight_pins: backlight { - renesas,groups = "tpu0_to2_1"; - renesas,function = "tpu0"; + groups = "tpu0_to2_1"; + function = "tpu0"; }; mmc0_pins: mmc0 { - renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1"; - renesas,function = "mmc0"; + groups = "mmc0_data8_1", "mmc0_ctrl_1"; + function = "mmc0"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp"; + function = "sdhi0"; }; fsia_pins: sounda { - renesas,groups = "fsia_sclk_in", "fsia_mclk_out", - "fsia_data_in_1", "fsia_data_out_0"; - renesas,function = "fsia"; + groups = "fsia_sclk_in", "fsia_mclk_out", + "fsia_data_in_1", "fsia_data_out_0"; + function = "fsia"; }; lcd0_pins: lcd0 { - renesas,groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync"; - renesas,function = "lcd0"; + groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync"; + function = "lcd0"; /* DBGMD/LCDC0/FSIA MUX */ gpio-hog; From ddf72563890a3361f7da82510ef8baca37a13830 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 07:53:54 +0900 Subject: [PATCH 04/88] ARM: dts: bockw: use generic pinctrl properties Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the bockw device tree to use the generic properties. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7778-bockw.dts | 40 ++++++++++++++--------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index 21e3b9dda2dab..e0dab14646488 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -130,53 +130,53 @@ pinctrl-names = "default"; scif0_pins: serial0 { - renesas,groups = "scif0_data_a", "scif0_ctrl"; - renesas,function = "scif0"; + groups = "scif0_data_a", "scif0_ctrl"; + function = "scif0"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; mmc_pins: mmc { - renesas,groups = "mmc_data8", "mmc_ctrl"; - renesas,function = "mmc"; + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; }; sdhi0_pup_pins: sd0_pup { - renesas,groups = "sdhi0_cd", "sdhi0_wp"; - renesas,function = "sdhi0"; + groups = "sdhi0_cd", "sdhi0_wp"; + function = "sdhi0"; bias-pull-up; }; hspi0_pins: hspi0 { - renesas,groups = "hspi0_a"; - renesas,function = "hspi0"; + groups = "hspi0_a"; + function = "hspi0"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; vin0_pins: vin0 { - renesas,groups = "vin0_data8", "vin0_clk"; - renesas,function = "vin0"; + groups = "vin0_data8", "vin0_clk"; + function = "vin0"; }; vin1_pins: vin1 { - renesas,groups = "vin1_data8", "vin1_clk"; - renesas,function = "vin1"; + groups = "vin1_data8", "vin1_clk"; + function = "vin1"; }; }; From 8870d1393e0685d0bb1ae879fb1db3ffcf9a1020 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 07:54:24 +0900 Subject: [PATCH 05/88] ARM: dts: marzen: use generic pinctrl properties Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the marzen device tree to use the generic properties. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7779-marzen.dts | 36 ++++++++++++++-------------- 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index e111d35d02aeb..b795da6f5503d 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -170,49 +170,49 @@ du_pins: du { du0 { - renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0"; - renesas,function = "du0"; + groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0"; + function = "du0"; }; du1 { - renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out"; - renesas,function = "du1"; + groups = "du1_rgb666", "du1_sync_1", "du1_clk_out"; + function = "du1"; }; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk_b"; - renesas,function = "scif_clk"; + groups = "scif_clk_b"; + function = "scif_clk"; }; ethernet_pins: ethernet { intc { - renesas,groups = "intc_irq1_b"; - renesas,function = "intc"; + groups = "intc_irq1_b"; + function = "intc"; }; lbsc { - renesas,groups = "lbsc_ex_cs0"; - renesas,function = "lbsc"; + groups = "lbsc_ex_cs0"; + function = "lbsc"; }; }; scif2_pins: serial2 { - renesas,groups = "scif2_data_c"; - renesas,function = "scif2"; + groups = "scif2_data_c"; + function = "scif2"; }; scif4_pins: serial4 { - renesas,groups = "scif4_data"; - renesas,function = "scif4"; + groups = "scif4_data"; + function = "scif4"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; + function = "sdhi0"; }; hspi0_pins: hspi0 { - renesas,groups = "hspi0"; - renesas,function = "hspi0"; + groups = "hspi0"; + function = "hspi0"; }; }; From fec7b9f8952f396d88228677f44d52c7e20a6be8 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 07:55:10 +0900 Subject: [PATCH 06/88] ARM: dts: koelsch: use generic pinctrl properties Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the koelsch device tree to use the generic properties. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7791-koelsch.dts | 68 +++++++++++++-------------- 1 file changed, 34 insertions(+), 34 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 0ad71b81d3a25..c6b43c85a0b12 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -324,89 +324,89 @@ pinctrl-names = "default"; i2c2_pins: i2c2 { - renesas,groups = "i2c2"; - renesas,function = "i2c2"; + groups = "i2c2"; + function = "i2c2"; }; du_pins: du { - renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - renesas,function = "du"; + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; }; scif0_pins: serial0 { - renesas,groups = "scif0_data_d"; - renesas,function = "scif0"; + groups = "scif0_data_d"; + function = "scif0"; }; scif1_pins: serial1 { - renesas,groups = "scif1_data_d"; - renesas,function = "scif1"; + groups = "scif1_data_d"; + function = "scif1"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq0"; - renesas,function = "intc"; + groups = "intc_irq0"; + function = "intc"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; }; sdhi1_pins: sd1 { - renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; - renesas,function = "sdhi1"; + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; }; sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; msiof0_pins: spi1 { - renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", + groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", "msiof0_tx"; - renesas,function = "msiof0"; + function = "msiof0"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; vin1_pins: vin1 { - renesas,groups = "vin1_data8", "vin1_clk"; - renesas,function = "vin1"; + groups = "vin1_data8", "vin1_clk"; + function = "vin1"; }; sound_pins: sound { - renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; - renesas,function = "ssi"; + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; sound_clk_pins: sound_clk { - renesas,groups = "audio_clk_a"; - renesas,function = "audio_clk"; + groups = "audio_clk_a"; + function = "audio_clk"; }; }; From b2abb296ad8cb576ea90e813842fa204bc21aebb Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 07:55:31 +0900 Subject: [PATCH 07/88] ARM: dts: porter: use generic pinctrl properties Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the porter device tree to use the generic properties. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7791-porter.dts | 60 ++++++++++++++-------------- 1 file changed, 30 insertions(+), 30 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 6c08314427d6a..af3751ff519a6 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -147,78 +147,78 @@ pinctrl-names = "default"; scif0_pins: serial0 { - renesas,groups = "scif0_data_d"; - renesas,function = "scif0"; + groups = "scif0_data_d"; + function = "scif0"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq0"; - renesas,function = "intc"; + groups = "intc_irq0"; + function = "intc"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; }; sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; i2c2_pins: i2c2 { - renesas,groups = "i2c2"; - renesas,function = "i2c2"; + groups = "i2c2"; + function = "i2c2"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; vin0_pins: vin0 { - renesas,groups = "vin0_data8", "vin0_clk"; - renesas,function = "vin0"; + groups = "vin0_data8", "vin0_clk"; + function = "vin0"; }; can0_pins: can0 { - renesas,groups = "can0_data"; - renesas,function = "can0"; + groups = "can0_data"; + function = "can0"; }; du_pins: du { - renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - renesas,function = "du"; + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; }; ssi_pins: sound { - renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; - renesas,function = "ssi"; + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; audio_clk_pins: audio_clk { - renesas,groups = "audio_clk_a"; - renesas,function = "audio_clk"; + groups = "audio_clk_a"; + function = "audio_clk"; }; }; From 2e207c1cd0f883a7d89b5241295c167e45f994b2 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 07:55:47 +0900 Subject: [PATCH 08/88] ARM: dts: gose: use generic pinctrl properties Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the gose device tree to use the generic Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7793-gose.dts | 40 +++++++++++++++--------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 87e89ec9dd47e..c61df8b316ee1 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -240,53 +240,53 @@ pinctrl-names = "default"; i2c2_pins: i2c2 { - renesas,groups = "i2c2"; - renesas,function = "i2c2"; + groups = "i2c2"; + function = "i2c2"; }; du_pins: du { - renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - renesas,function = "du"; + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; }; scif0_pins: serial0 { - renesas,groups = "scif0_data_d"; - renesas,function = "scif0"; + groups = "scif0_data_d"; + function = "scif0"; }; scif1_pins: serial1 { - renesas,groups = "scif1_data_d"; - renesas,function = "scif1"; + groups = "scif1_data_d"; + function = "scif1"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq0"; - renesas,function = "intc"; + groups = "intc_irq0"; + function = "intc"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; sound_pins: sound { - renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; - renesas,function = "ssi"; + groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; sound_clk_pins: sound_clk { - renesas,groups = "audio_clk_a"; - renesas,function = "audio_clk"; + groups = "audio_clk_a"; + function = "audio_clk"; }; }; From be7359dd9813e44bad827607048dd16298076bb8 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 07:56:21 +0900 Subject: [PATCH 09/88] ARM: dts: alt: use generic pinctrl properties Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the alt device tree to use the generic properties. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7794-alt.dts | 32 +++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index ca9bc4fff2875..383ad791f1db3 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -107,38 +107,38 @@ pinctrl-names = "default"; du_pins: du { - renesas,groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0"; - renesas,function = "du"; + groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0"; + function = "du"; }; scif2_pins: serial2 { - renesas,groups = "scif2_data"; - renesas,function = "scif2"; + groups = "scif2_data"; + function = "scif2"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq8"; - renesas,function = "intc"; + groups = "intc_irq8"; + function = "intc"; }; i2c1_pins: i2c1 { - renesas,groups = "i2c1"; - renesas,function = "i2c1"; + groups = "i2c1"; + function = "i2c1"; }; vin0_pins: vin0 { - renesas,groups = "vin0_data8", "vin0_clk"; - renesas,function = "vin0"; + groups = "vin0_data8", "vin0_clk"; + function = "vin0"; }; }; @@ -148,8 +148,8 @@ &pfc { qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; }; From 4386ed21e5c1944f9b666f405796499526c5e59b Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 07:57:28 +0900 Subject: [PATCH 10/88] ARM: dts: silk: use generic pinctrl properties Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the silk device tree to use the generic properties. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7794-silk.dts | 44 +++++++++++++++--------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 66f077a3ca41d..56d98d5b21850 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -130,58 +130,58 @@ pinctrl-names = "default"; scif2_pins: serial2 { - renesas,groups = "scif2_data"; - renesas,function = "scif2"; + groups = "scif2_data"; + function = "scif2"; }; scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; + groups = "scif_clk"; + function = "scif_clk"; }; ether_pins: ether { - renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; - renesas,function = "eth"; + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; }; phy1_pins: phy1 { - renesas,groups = "intc_irq8"; - renesas,function = "intc"; + groups = "intc_irq8"; + function = "intc"; }; i2c1_pins: i2c1 { - renesas,groups = "i2c1"; - renesas,function = "i2c1"; + groups = "i2c1"; + function = "i2c1"; }; mmcif0_pins: mmcif0 { - renesas,groups = "mmc_data8", "mmc_ctrl"; - renesas,function = "mmc"; + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; }; sdhi1_pins: sd1 { - renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; - renesas,function = "sdhi1"; + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; }; qspi_pins: spi0 { - renesas,groups = "qspi_ctrl", "qspi_data4"; - renesas,function = "qspi"; + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; }; vin0_pins: vin0 { - renesas,groups = "vin0_data8", "vin0_clk"; - renesas,function = "vin0"; + groups = "vin0_data8", "vin0_clk"; + function = "vin0"; }; usb0_pins: usb0 { - renesas,groups = "usb0"; - renesas,function = "usb0"; + groups = "usb0"; + function = "usb0"; }; usb1_pins: usb1 { - renesas,groups = "usb1"; - renesas,function = "usb1"; + groups = "usb1"; + function = "usb1"; }; }; From ffff86d16ed25655643f75fdb83eb70f0a8496af Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 07:57:10 +0900 Subject: [PATCH 11/88] ARM: dts: kzm9g: use generic pinctrl properties Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the kzm9g device tree to use the generic properties. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/sh73a0-kzm9g.dts | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index aa8bae3b8fcff..e40a2f23b6cd4 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -329,41 +329,41 @@ &pfc { i2c3_pins: i2c3 { - renesas,groups = "i2c3_1"; - renesas,function = "i2c3"; + groups = "i2c3_1"; + function = "i2c3"; }; mmcif_pins: mmc { mux { - renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; - renesas,function = "mmc0"; + groups = "mmc0_data8_0", "mmc0_ctrl_0"; + function = "mmc0"; }; cfg { - renesas,groups = "mmc0_data8_0"; - renesas,pins = "PORT279"; + groups = "mmc0_data8_0"; + pins = "PORT279"; bias-pull-up; }; }; scifa4_pins: serial4 { - renesas,groups = "scifa4_data", "scifa4_ctrl"; - renesas,function = "scifa4"; + groups = "scifa4_data", "scifa4_ctrl"; + function = "scifa4"; }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; + function = "sdhi0"; }; sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; }; fsia_pins: sounda { - renesas,groups = "fsia_mclk_in", "fsia_sclk_in", - "fsia_data_in", "fsia_data_out"; - renesas,function = "fsia"; + groups = "fsia_mclk_in", "fsia_sclk_in", + "fsia_data_in", "fsia_data_out"; + function = "fsia"; }; }; From 20ccdd90ab22808e582d81cdfac09e3b804e7b20 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 07:57:10 +0900 Subject: [PATCH 12/88] ARM: dts: kzm9d: use generic pinctrl properties Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. This patch updates the kzm9d device tree to use the generic properties. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/emev2-kzm9d.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 8c24975e8f9d6..a35b851e1cd76 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -105,8 +105,8 @@ &pfc { uart1_pins: serial@e1030000 { - renesas,groups = "uart1_ctrl", "uart1_data"; - renesas,function = "uart1"; + groups = "uart1_ctrl", "uart1_data"; + function = "uart1"; }; }; From b19dd47b27d2bd719d304f27c0a4fcd3f51632dd Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 16 Mar 2016 09:21:13 +0900 Subject: [PATCH 13/88] ARM: dts: r8a7790: Remove unnecessary clock-output-names properties * Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary the nodes. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7790.dtsi | 88 +++++++++++----------------------- 1 file changed, 28 insertions(+), 60 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 38b706399a6b1..283698fc0fea2 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1003,20 +1003,18 @@ ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overriden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; }; /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus_clk { + pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <100000000>; - clock-output-names = "pcie_bus"; status = "disabled"; }; @@ -1028,19 +1026,16 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_a"; }; audio_clk_b: audio_clk_b { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_b"; }; audio_clk_c: audio_clk_c { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_c"; }; /* External SCIF clock */ @@ -1053,11 +1048,10 @@ }; /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal_clk { + usb_extal_clk: usb_extal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; - clock-output-names = "usb_extal"; }; /* External CAN clock */ @@ -1066,7 +1060,6 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "can_clk"; status = "disabled"; }; @@ -1084,201 +1077,176 @@ }; /* Variable factor clocks */ - sd2_clk: sd2_clk@e6150078 { + sd2_clk: sd2@e6150078 { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; }; - sd3_clk: sd3_clk@e615026c { + sd3_clk: sd3@e615026c { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd3"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; - mmc1_clk: mmc1_clk@e6150244 { + mmc1_clk: mmc1@e6150244 { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150244 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc1"; }; - ssp_clk: ssp_clk@e6150248 { + ssp_clk: ssp@e6150248 { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150248 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "ssp"; }; - ssprs_clk: ssprs_clk@e615024c { + ssprs_clk: ssprs@e615024c { compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615024c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "ssprs"; }; /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - z2_clk: z2_clk { + z2_clk: z2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "z2"; }; - zg_clk: zg_clk { + zg_clk: zg { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zg"; }; - zx_clk: zx_clk { + zx_clk: zx { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zx"; }; - zs_clk: zs_clk { + zs_clk: zs { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zs"; }; - hp_clk: hp_clk { + hp_clk: hp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "hp"; }; - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "i"; }; - b_clk: b_clk { + b_clk: b { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "b"; }; - p_clk: p_clk { + p_clk: p { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "p"; }; - cl_clk: cl_clk { + cl_clk: cl { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <48>; clock-mult = <1>; - clock-output-names = "cl"; }; - m2_clk: m2_clk { + m2_clk: m2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "m2"; }; - imp_clk: imp_clk { + imp_clk: imp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "imp"; }; - rclk_clk: rclk_clk { + rclk_clk: rclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <(48 * 1024)>; clock-mult = <1>; - clock-output-names = "rclk"; }; - oscclk_clk: oscclk_clk { + oscclk_clk: oscclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL1>; #clock-cells = <0>; clock-div = <(12 * 1024)>; clock-mult = <1>; - clock-output-names = "oscclk"; }; - zb3_clk: zb3_clk { + zb3_clk: zb3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL3>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "zb3"; }; - zb3d2_clk: zb3d2_clk { + zb3d2_clk: zb3d2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "zb3d2"; }; - ddr_clk: ddr_clk { + ddr_clk: ddr { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7790_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "ddr"; }; - mp_clk: mp_clk { + mp_clk: mp { compatible = "fixed-factor-clock"; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-div = <15>; clock-mult = <1>; - clock-output-names = "mp"; }; - cp_clk: cp_clk { + cp_clk: cp { compatible = "fixed-factor-clock"; clocks = <&extal_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "cp"; }; /* Gate clocks */ From 21f189705929b9d27a44f0ae3d2ddd390c545670 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 08:10:44 +0900 Subject: [PATCH 14/88] ARM: dts: r7s72100: Remove unnecessary clock-output-names properties * Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r7s72100.dtsi | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 89e46ebef1bca..e8e2a5d71976c 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -37,46 +37,41 @@ #size-cells = <1>; /* External clocks */ - extal_clk: extal_clk { + extal_clk: extal { #clock-cells = <0>; compatible = "fixed-clock"; /* If clk present, value must be set by board */ clock-frequency = <0>; - clock-output-names = "extal"; }; - usb_x1_clk: usb_x1_clk { + usb_x1_clk: usb_x1 { #clock-cells = <0>; compatible = "fixed-clock"; /* If clk present, value must be set by board */ clock-frequency = <0>; - clock-output-names = "usb_x1"; }; /* Fixed factor clocks */ - b_clk: b_clk { + b_clk: b { #clock-cells = <0>; compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R7S72100_CLK_PLL>; clock-mult = <1>; clock-div = <3>; - clock-output-names = "b"; }; - p1_clk: p1_clk { + p1_clk: p1 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R7S72100_CLK_PLL>; clock-mult = <1>; clock-div = <6>; - clock-output-names = "p1"; }; - p0_clk: p0_clk { + p0_clk: p0 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R7S72100_CLK_PLL>; clock-mult = <1>; clock-div = <12>; - clock-output-names = "p0"; }; /* Special CPG clocks */ From 2dca78980372f154a2181e6044db71be9da626e9 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 08:14:31 +0900 Subject: [PATCH 15/88] ARM: dts: r8a7740: Remove unnecessary clock-output-names properties * Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7740.dtsi | 57 ++++++++++++---------------------- 1 file changed, 19 insertions(+), 38 deletions(-) diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 995fbda74b7a0..39b2f88ad151e 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -422,53 +422,45 @@ ranges; /* External root clock */ - extalr_clk: extalr_clk { + extalr_clk: extalr { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; - clock-output-names = "extalr"; }; - extal1_clk: extal1_clk { + extal1_clk: extal1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "extal1"; }; - extal2_clk: extal2_clk { + extal2_clk: extal2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "extal2"; }; - dv_clk: dv_clk { + dv_clk: dv { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; - clock-output-names = "dv"; }; - fmsick_clk: fmsick_clk { + fmsick_clk: fmsick { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fmsick"; }; - fmsock_clk: fmsock_clk { + fmsock_clk: fmsock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fmsock"; }; - fsiack_clk: fsiack_clk { + fsiack_clk: fsiack { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fsiack"; }; - fsibck_clk: fsibck_clk { + fsibck_clk: fsibck { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fsibck"; }; /* Special CPG clocks */ @@ -486,7 +478,7 @@ }; /* Variable factor clocks (DIV6) */ - vclk1_clk: vclk1_clk@e6150008 { + vclk1_clk: vclk1@e6150008 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150008 4>; clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>, @@ -494,9 +486,8 @@ <&extal1_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk1"; }; - vclk2_clk: vclk2_clk@e615000c { + vclk2_clk: vclk2@e615000c { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615000c 4>; clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>, @@ -504,77 +495,67 @@ <&extal1_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk2"; }; - fmsi_clk: fmsi_clk@e6150010 { + fmsi_clk: fmsi@e6150010 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150010 4>; clocks = <&pllc1_div2_clk>, <&fmsick_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "fmsi"; }; - fmso_clk: fmso_clk@e6150014 { + fmso_clk: fmso@e6150014 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150014 4>; clocks = <&pllc1_div2_clk>, <&fmsock_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "fmso"; }; - fsia_clk: fsia_clk@e6150018 { + fsia_clk: fsia@e6150018 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150018 4>; clocks = <&pllc1_div2_clk>, <&fsiack_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "fsia"; }; - sub_clk: sub_clk@e6150080 { + sub_clk: sub@e6150080 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150080 4>; clocks = <&pllc1_div2_clk>, <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "sub"; }; - spu_clk: spu_clk@e6150084 { + spu_clk: spu@e6150084 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150084 4>; clocks = <&pllc1_div2_clk>, <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "spu"; }; - vou_clk: vou_clk@e6150088 { + vou_clk: vou@e6150088 { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150088 4>; clocks = <&pllc1_div2_clk>, <&extal1_clk>, <&dv_clk>, <0>; #clock-cells = <0>; - clock-output-names = "vou"; }; - stpro_clk: stpro_clk@e615009c { + stpro_clk: stpro@e615009c { compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615009c 4>; clocks = <&cpg_clocks R8A7740_CLK_PLLC0>; #clock-cells = <0>; - clock-output-names = "stpro"; }; /* Fixed factor clocks */ - pllc1_div2_clk: pllc1_div2_clk { + pllc1_div2_clk: pllc1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7740_CLK_PLLC1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pllc1_div2"; }; - extal1_div2_clk: extal1_div2_clk { + extal1_div2_clk: extal1_div2 { compatible = "fixed-factor-clock"; clocks = <&extal1_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "extal1_div2"; }; /* Gate clocks */ From 452fc89994c2a81ade92096088b94ecbfef436a8 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 08:15:11 +0900 Subject: [PATCH 16/88] ARM: dts: r8a7778: Remove unnecessary clock-output-names properties * Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7778.dtsi | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index f83a348fc07a4..99c10ebbaca24 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -443,11 +443,10 @@ ranges; /* External input clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "extal"; }; /* External SCIF clock */ @@ -474,59 +473,51 @@ audio_clk_a: audio_clk_a { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "audio_clk_a"; }; audio_clk_b: audio_clk_b { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "audio_clk_b"; }; audio_clk_c: audio_clk_c { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "audio_clk_c"; }; /* Fixed ratio clocks */ - g_clk: g_clk { + g_clk: g { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLA>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "g"; }; - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLA>; #clock-cells = <0>; clock-div = <1>; clock-mult = <1>; - clock-output-names = "i"; }; - s3_clk: s3_clk { + s3_clk: s3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLA>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "s3"; }; - s4_clk: s4_clk { + s4_clk: s4 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLA>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "s4"; }; - z_clk: z_clk { + z_clk: z { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7778_CLK_PLLB>; #clock-cells = <0>; clock-div = <1>; clock-mult = <1>; - clock-output-names = "z"; }; /* Gate clocks */ From 3f6dba702c57908c5f66601ced6ef9f131759611 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 08:15:34 +0900 Subject: [PATCH 17/88] ARM: dts: r8a7779: Remove unnecessary clock-output-names properties * Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7779.dtsi | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index a0cc08e6295b0..60bc1e66bba92 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -445,12 +445,11 @@ ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overriden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; }; /* External SCIF clock */ @@ -474,37 +473,33 @@ }; /* Fixed factor clocks */ - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7779_CLK_PLLA>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "i"; }; - s3_clk: s3_clk { + s3_clk: s3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7779_CLK_PLLA>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "s3"; }; - s4_clk: s4_clk { + s4_clk: s4 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7779_CLK_PLLA>; #clock-cells = <0>; clock-div = <16>; clock-mult = <1>; - clock-output-names = "s4"; }; - g_clk: g_clk { + g_clk: g { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7779_CLK_PLLA>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "g"; }; /* Gate clocks */ From f617604fe5d74b9c8d3333bad2e4959abe4594a4 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 08:16:23 +0900 Subject: [PATCH 18/88] ARM: dts: r8a7791: Remove unnecessary clock-output-names properties * Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7791.dtsi | 79 +++++++++++----------------------- 1 file changed, 25 insertions(+), 54 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6439f0569fe2c..8010d935300fa 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1048,12 +1048,11 @@ ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overriden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; }; /* @@ -1064,27 +1063,23 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_a"; }; audio_clk_b: audio_clk_b { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_b"; }; audio_clk_c: audio_clk_c { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_c"; }; /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus_clk { + pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <100000000>; - clock-output-names = "pcie_bus"; status = "disabled"; }; @@ -1098,11 +1093,10 @@ }; /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal_clk { + usb_extal_clk: usb_extal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; - clock-output-names = "usb_extal"; }; /* External CAN clock */ @@ -1111,7 +1105,6 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "can_clk"; status = "disabled"; }; @@ -1129,178 +1122,156 @@ }; /* Variable factor clocks */ - sd2_clk: sd2_clk@e6150078 { + sd2_clk: sd2@e6150078 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; }; - sd3_clk: sd3_clk@e615026c { + sd3_clk: sd3@e615026c { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd3"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; - ssp_clk: ssp_clk@e6150248 { + ssp_clk: ssp@e6150248 { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150248 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "ssp"; }; - ssprs_clk: ssprs_clk@e615024c { + ssprs_clk: ssprs@e615024c { compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615024c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "ssprs"; }; /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - zg_clk: zg_clk { + zg_clk: zg { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zg"; }; - zx_clk: zx_clk { + zx_clk: zx { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zx"; }; - zs_clk: zs_clk { + zs_clk: zs { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zs"; }; - hp_clk: hp_clk { + hp_clk: hp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "hp"; }; - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "i"; }; - b_clk: b_clk { + b_clk: b { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "b"; }; - p_clk: p_clk { + p_clk: p { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "p"; }; - cl_clk: cl_clk { + cl_clk: cl { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <48>; clock-mult = <1>; - clock-output-names = "cl"; }; - m2_clk: m2_clk { + m2_clk: m2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "m2"; }; - rclk_clk: rclk_clk { + rclk_clk: rclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <(48 * 1024)>; clock-mult = <1>; - clock-output-names = "rclk"; }; - oscclk_clk: oscclk_clk { + oscclk_clk: oscclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL1>; #clock-cells = <0>; clock-div = <(12 * 1024)>; clock-mult = <1>; - clock-output-names = "oscclk"; }; - zb3_clk: zb3_clk { + zb3_clk: zb3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL3>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "zb3"; }; - zb3d2_clk: zb3d2_clk { + zb3d2_clk: zb3d2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "zb3d2"; }; - ddr_clk: ddr_clk { + ddr_clk: ddr { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7791_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "ddr"; }; - mp_clk: mp_clk { + mp_clk: mp { compatible = "fixed-factor-clock"; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-div = <15>; clock-mult = <1>; - clock-output-names = "mp"; }; - cp_clk: cp_clk { + cp_clk: cp { compatible = "fixed-factor-clock"; clocks = <&extal_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "cp"; }; /* Gate clocks */ From 3b81c0ce13c53445b1e38fa1ff86025e5b8a9199 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 08:17:09 +0900 Subject: [PATCH 19/88] ARM: dts: r8a7793: Remove unnecessary clock-output-names properties * Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7793.dtsi | 45 +++++++++++----------------------- 1 file changed, 14 insertions(+), 31 deletions(-) diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index b482159452412..95bbed95b0c1b 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -812,12 +812,11 @@ ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; }; /* @@ -828,19 +827,16 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_a"; }; audio_clk_b: audio_clk_b { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_b"; }; audio_clk_c: audio_clk_c { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "audio_clk_c"; }; /* External SCIF clock */ @@ -866,111 +862,98 @@ }; /* Variable factor clocks */ - sd2_clk: sd2_clk@e6150078 { + sd2_clk: sd2@e6150078 { compatible = "renesas,r8a7793-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; }; - sd3_clk: sd3_clk@e615026c { + sd3_clk: sd3@e615026c { compatible = "renesas,r8a7793-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd3"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a7793-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - zg_clk: zg_clk { + zg_clk: zg { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <5>; clock-mult = <1>; - clock-output-names = "zg"; }; - zx_clk: zx_clk { + zx_clk: zx { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zx"; }; - zs_clk: zs_clk { + zs_clk: zs { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zs"; }; - hp_clk: hp_clk { + hp_clk: hp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "hp"; }; - p_clk: p_clk { + p_clk: p { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "p"; }; - m2_clk: m2_clk { + m2_clk: m2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "m2"; }; - rclk_clk: rclk_clk { + rclk_clk: rclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7793_CLK_PLL1>; #clock-cells = <0>; clock-div = <(48 * 1024)>; clock-mult = <1>; - clock-output-names = "rclk"; }; - mp_clk: mp_clk { + mp_clk: mp { compatible = "fixed-factor-clock"; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-div = <15>; clock-mult = <1>; - clock-output-names = "mp"; }; - cp_clk: cp_clk { + cp_clk: cp { compatible = "fixed-factor-clock"; clocks = <&extal_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "cp"; }; /* Gate clocks */ From 337f6bef6dd8dd9d2621980e2d34150d2014909c Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 08:17:57 +0900 Subject: [PATCH 20/88] ARM: dts: r8a7794: Remove unnecessary clock-output-names properties * Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7794.dtsi | 66 ++++++++++++---------------------- 1 file changed, 22 insertions(+), 44 deletions(-) diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index eacb2b291361e..7d7d18766540c 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -836,12 +836,11 @@ ranges; /* External root clock */ - extal_clk: extal_clk { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overriden by the board. */ clock-frequency = <0>; - clock-output-names = "extal"; }; /* External SCIF clock */ @@ -865,173 +864,152 @@ #power-domain-cells = <0>; }; /* Variable factor clocks */ - sd2_clk: sd2_clk@e6150078 { + sd2_clk: sd2@e6150078 { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd2"; }; - sd3_clk: sd3_clk@e615026c { + sd3_clk: sd3@e615026c { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "sd3"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; /* Fixed factor clocks */ - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - zg_clk: zg_clk { + zg_clk: zg { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zg"; }; - zx_clk: zx_clk { + zx_clk: zx { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <3>; clock-mult = <1>; - clock-output-names = "zx"; }; - zs_clk: zs_clk { + zs_clk: zs { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <6>; clock-mult = <1>; - clock-output-names = "zs"; }; - hp_clk: hp_clk { + hp_clk: hp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "hp"; }; - i_clk: i_clk { + i_clk: i { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "i"; }; - b_clk: b_clk { + b_clk: b { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <12>; clock-mult = <1>; - clock-output-names = "b"; }; - p_clk: p_clk { + p_clk: p { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <24>; clock-mult = <1>; - clock-output-names = "p"; }; - cl_clk: cl_clk { + cl_clk: cl { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <48>; clock-mult = <1>; - clock-output-names = "cl"; }; - m2_clk: m2_clk { + m2_clk: m2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "m2"; }; - rclk_clk: rclk_clk { + rclk_clk: rclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <(48 * 1024)>; clock-mult = <1>; - clock-output-names = "rclk"; }; - oscclk_clk: oscclk_clk { + oscclk_clk: oscclk { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <(12 * 1024)>; clock-mult = <1>; - clock-output-names = "oscclk"; }; - zb3_clk: zb3_clk { + zb3_clk: zb3 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL3>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "zb3"; }; - zb3d2_clk: zb3d2_clk { + zb3d2_clk: zb3d2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "zb3d2"; }; - ddr_clk: ddr_clk { + ddr_clk: ddr { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL3>; #clock-cells = <0>; clock-div = <8>; clock-mult = <1>; - clock-output-names = "ddr"; }; - mp_clk: mp_clk { + mp_clk: mp { compatible = "fixed-factor-clock"; clocks = <&pll1_div2_clk>; #clock-cells = <0>; clock-div = <15>; clock-mult = <1>; - clock-output-names = "mp"; }; - cp_clk: cp_clk { + cp_clk: cp { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7794_CLK_PLL1>; #clock-cells = <0>; clock-div = <48>; clock-mult = <1>; - clock-output-names = "cp"; }; - acp_clk: acp_clk { + acp_clk: acp { compatible = "fixed-factor-clock"; clocks = <&extal_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "acp"; }; /* Gate clocks */ From 45e4f51311f3d4551326bfa43547f86b00af0a94 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 08:17:57 +0900 Subject: [PATCH 21/88] ARM: dts: gose: Remove unnecessary clock-output-names properties * Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7793-gose.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index c61df8b316ee1..3cd1c804621fa 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -158,11 +158,10 @@ }; }; - audio_clock: clock { + audio_clock: audio_clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <11289600>; - clock-output-names = "audio_clock"; }; rsnd_ak4643: sound { From 62c7e9da598611827f09984386fa1438ccc46f87 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 08:17:57 +0900 Subject: [PATCH 22/88] ARM: dts: koelsch: Remove unnecessary clock-output-names properties * Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7791-koelsch.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index c6b43c85a0b12..1adf8770db7e9 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -242,11 +242,10 @@ 1800000 0>; }; - audio_clock: clock { + audio_clock: audio_clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <11289600>; - clock-output-names = "audio_clock"; }; rsnd_ak4643: sound { From 203f0ef865303412a9d03a88a2f845db682ac628 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 08:17:57 +0900 Subject: [PATCH 23/88] ARM: dts: porter: Remove unnecessary clock-output-names properties * Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7791-porter.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index af3751ff519a6..9554d13362f60 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -113,11 +113,10 @@ clock-frequency = <74250000>; }; - x14_clk: x14-clock { + x14_clk: audio_clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <11289600>; - clock-output-names = "audio_clock"; }; sound { From a5bad2c7c9ee0f5e188b97baeb383753fad53c86 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Mar 2016 08:17:57 +0900 Subject: [PATCH 24/88] ARM: dts: lager: Remove unnecessary clock-output-names properties * Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7790-lager.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index a5828721ab7c3..823a119cb1b4a 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -176,11 +176,10 @@ 1800000 0>; }; - audio_clock: clock { + audio_clock: audio_clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <11289600>; - clock-output-names = "audio_clock"; }; rsnd_ak4643: sound { From 57c75d1ed6890b8c57fce5d0c557a6b486c4d898 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 23 Mar 2016 10:06:42 +0900 Subject: [PATCH 25/88] ARM: dts: r8a73a4: Remove unnecessary clock-output-names properties * Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. The clock-output-names property is left in place for the zb_clk which is thus treated as a special case as the MSTP clock driver (clk-mstp.c) explicitly looks for a clock with node name zb_clk for the r8a73a4 and sh73a0 SoCs. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a73a4.dtsi | 75 ++++++++++++---------------------- 1 file changed, 25 insertions(+), 50 deletions(-) diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 6583a1dfca1f6..6954912a37537 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -486,37 +486,32 @@ ranges; /* External root clocks */ - extalr_clk: extalr_clk { + extalr_clk: extalr { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; - clock-output-names = "extalr"; }; - extal1_clk: extal1_clk { + extal1_clk: extal1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; - clock-output-names = "extal1"; }; - extal2_clk: extal2_clk { + extal2_clk: extal2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; - clock-output-names = "extal2"; }; - fsiack_clk: fsiack_clk { + fsiack_clk: fsiack { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "fsiack"; }; - fsibck_clk: fsibck_clk { + fsibck_clk: fsibck { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - clock-output-names = "fsibck"; }; /* Special CPG clocks */ @@ -540,171 +535,151 @@ #clock-cells = <0>; clock-output-names = "zb"; }; - sdhi0_clk: sdhi0_clk@e6150074 { + sdhi0_clk: sdhi0ck@e6150074 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150074 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "sdhi0ck"; }; - sdhi1_clk: sdhi1_clk@e6150078 { + sdhi1_clk: sdhi1ck@e6150078 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150078 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "sdhi1ck"; }; - sdhi2_clk: sdhi2_clk@e615007c { + sdhi2_clk: sdhi2ck@e615007c { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615007c 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "sdhi2ck"; }; - mmc0_clk: mmc0_clk@e6150240 { + mmc0_clk: mmc0@e6150240 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150240 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "mmc0"; }; - mmc1_clk: mmc1_clk@e6150244 { + mmc1_clk: mmc1@e6150244 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150244 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "mmc1"; }; - vclk1_clk: vclk1_clk@e6150008 { + vclk1_clk: vclk1@e6150008 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150008 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk1"; }; - vclk2_clk: vclk2_clk@e615000c { + vclk2_clk: vclk2@e615000c { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615000c 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk2"; }; - vclk3_clk: vclk3_clk@e615001c { + vclk3_clk: vclk3@e615001c { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615001c 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk3"; }; - vclk4_clk: vclk4_clk@e6150014 { + vclk4_clk: vclk4@e6150014 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150014 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk4"; }; - vclk5_clk: vclk5_clk@e6150034 { + vclk5_clk: vclk5@e6150034 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150034 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>, <&extal2_clk>, <&main_div2_clk>, <&extalr_clk>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "vclk5"; }; - fsia_clk: fsia_clk@e6150018 { + fsia_clk: fsia@e6150018 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150018 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <&fsiack_clk>, <0>; #clock-cells = <0>; - clock-output-names = "fsia"; }; - fsib_clk: fsib_clk@e6150090 { + fsib_clk: fsib@e6150090 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150090 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <&fsibck_clk>, <0>; #clock-cells = <0>; - clock-output-names = "fsib"; }; - mp_clk: mp_clk@e6150080 { + mp_clk: mp@e6150080 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150080 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "mp"; }; - m4_clk: m4_clk@e6150098 { + m4_clk: m4@e6150098 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150098 0 4>; clocks = <&cpg_clocks R8A73A4_CLK_PLL2S>; #clock-cells = <0>; - clock-output-names = "m4"; }; - hsi_clk: hsi_clk@e615026c { + hsi_clk: hsi@e615026c { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe615026c 0 4>; clocks = <&cpg_clocks R8A73A4_CLK_PLL2H>, <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>; #clock-cells = <0>; - clock-output-names = "hsi"; }; - spuv_clk: spuv_clk@e6150094 { + spuv_clk: spuv@e6150094 { compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock"; reg = <0 0xe6150094 0 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "spuv"; }; /* Fixed factor clocks */ - main_div2_clk: main_div2_clk { + main_div2_clk: main_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A73A4_CLK_MAIN>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "main_div2"; }; - pll0_div2_clk: pll0_div2_clk { + pll0_div2_clk: pll0_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A73A4_CLK_PLL0>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll0_div2"; }; - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A73A4_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - extal1_div2_clk: extal1_div2_clk { + extal1_div2_clk: extal1_div2 { compatible = "fixed-factor-clock"; clocks = <&extal1_clk>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "extal1_div2"; }; /* Gate clocks */ From 000025cfbb9e8bafd0a1fa84d8d83526d24bde42 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 23 Mar 2016 10:06:43 +0900 Subject: [PATCH 26/88] ARM: dts: sh73a0: Remove unnecessary clock-output-names properties * Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. The clock-output-names property is left in place for the zb_clk which is thus treated as a special case as the MSTP clock driver (clk-mstp.c) explicitly looks for a clock with node name zb_clk for the r8a73a4 and sh73a0 SoCs. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/sh73a0.dtsi | 87 ++++++++++++----------------------- 1 file changed, 29 insertions(+), 58 deletions(-) diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index bf825ca4f6f79..639ea2d76970c 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -602,39 +602,33 @@ ranges; /* External root clocks */ - extalr_clk: extalr_clk { + extalr_clk: extalr { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; - clock-output-names = "extalr"; }; - extal1_clk: extal1_clk { + extal1_clk: extal1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; - clock-output-names = "extal1"; }; - extal2_clk: extal2_clk { + extal2_clk: extal2 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "extal2"; }; - extcki_clk: extcki_clk { + extcki_clk: extcki { compatible = "fixed-clock"; #clock-cells = <0>; - clock-output-names = "extcki"; }; - fsiack_clk: fsiack_clk { + fsiack_clk: fsiack { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fsiack"; }; - fsibck_clk: fsibck_clk { + fsibck_clk: fsibck { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; - clock-output-names = "fsibck"; }; /* Special CPG clocks */ @@ -650,7 +644,7 @@ }; /* Variable factor clocks (DIV6) */ - vclk1_clk: vclk1_clk@e6150008 { + vclk1_clk: vclk1@e6150008 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150008 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, @@ -658,9 +652,8 @@ <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, <0>; #clock-cells = <0>; - clock-output-names = "vclk1"; }; - vclk2_clk: vclk2_clk@e615000c { + vclk2_clk: vclk2@e615000c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615000c 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, @@ -668,9 +661,8 @@ <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, <0>; #clock-cells = <0>; - clock-output-names = "vclk2"; }; - vclk3_clk: vclk3_clk@e615001c { + vclk3_clk: vclk3@e615001c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615001c 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, @@ -678,7 +670,6 @@ <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>, <0>; #clock-cells = <0>; - clock-output-names = "vclk3"; }; zb_clk: zb_clk@e6150010 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; @@ -688,168 +679,148 @@ #clock-cells = <0>; clock-output-names = "zb"; }; - flctl_clk: flctl_clk@e6150014 { + flctl_clk: flctlck@e6150014 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150014 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "flctlck"; }; - sdhi0_clk: sdhi0_clk@e6150074 { + sdhi0_clk: sdhi0ck@e6150074 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150074 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&pll1_div13_clk>, <0>; #clock-cells = <0>; - clock-output-names = "sdhi0ck"; }; - sdhi1_clk: sdhi1_clk@e6150078 { + sdhi1_clk: sdhi1ck@e6150078 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150078 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&pll1_div13_clk>, <0>; #clock-cells = <0>; - clock-output-names = "sdhi1ck"; }; - sdhi2_clk: sdhi2_clk@e615007c { + sdhi2_clk: sdhi2ck@e615007c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615007c 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&pll1_div13_clk>, <0>; #clock-cells = <0>; - clock-output-names = "sdhi2ck"; }; - fsia_clk: fsia_clk@e6150018 { + fsia_clk: fsia@e6150018 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150018 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&fsiack_clk>, <&fsiack_clk>; #clock-cells = <0>; - clock-output-names = "fsia"; }; - fsib_clk: fsib_clk@e6150090 { + fsib_clk: fsib@e6150090 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150090 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&fsibck_clk>, <&fsibck_clk>; #clock-cells = <0>; - clock-output-names = "fsib"; }; - sub_clk: sub_clk@e6150080 { + sub_clk: sub@e6150080 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150080 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "sub"; }; - spua_clk: spua_clk@e6150084 { + spua_clk: spua@e6150084 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150084 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "spua"; }; - spuv_clk: spuv_clk@e6150094 { + spuv_clk: spuv@e6150094 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150094 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&extal2_clk>, <&extal2_clk>; #clock-cells = <0>; - clock-output-names = "spuv"; }; - msu_clk: msu_clk@e6150088 { + msu_clk: msu@e6150088 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150088 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "msu"; }; - hsi_clk: hsi_clk@e615008c { + hsi_clk: hsi@e615008c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615008c 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&pll1_div7_clk>, <0>; #clock-cells = <0>; - clock-output-names = "hsi"; }; - mfg1_clk: mfg1_clk@e6150098 { + mfg1_clk: mfg1@e6150098 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150098 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "mfg1"; }; - mfg2_clk: mfg2_clk@e615009c { + mfg2_clk: mfg2@e615009c { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe615009c 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "mfg2"; }; - dsit_clk: dsit_clk@e6150060 { + dsit_clk: dsit@e6150060 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150060 4>; clocks = <&pll1_div2_clk>, <0>, <&cpg_clocks SH73A0_CLK_PLL2>, <0>; #clock-cells = <0>; - clock-output-names = "dsit"; }; - dsi0p_clk: dsi0p_clk@e6150064 { + dsi0p_clk: dsi0pck@e6150064 { compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; reg = <0xe6150064 4>; clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>, <&cpg_clocks SH73A0_CLK_MAIN>, <&extal2_clk>, <&extcki_clk>, <0>, <0>, <0>; #clock-cells = <0>; - clock-output-names = "dsi0pck"; }; /* Fixed factor clocks */ - main_div2_clk: main_div2_clk { + main_div2_clk: main_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_MAIN>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "main_div2"; }; - pll1_div2_clk: pll1_div2_clk { + pll1_div2_clk: pll1_div2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_PLL1>; #clock-cells = <0>; clock-div = <2>; clock-mult = <1>; - clock-output-names = "pll1_div2"; }; - pll1_div7_clk: pll1_div7_clk { + pll1_div7_clk: pll1_div7 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_PLL1>; #clock-cells = <0>; clock-div = <7>; clock-mult = <1>; - clock-output-names = "pll1_div7"; }; - pll1_div13_clk: pll1_div13_clk { + pll1_div13_clk: pll1_div13 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_PLL1>; #clock-cells = <0>; clock-div = <13>; clock-mult = <1>; - clock-output-names = "pll1_div13"; }; - twd_clk: twd_clk { + twd_clk: twd { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_Z>; #clock-cells = <0>; clock-div = <4>; clock-mult = <1>; - clock-output-names = "twd"; }; /* Gate clocks */ From 847e87920c667ad9a9f4b628b60451c1471ae003 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Wed, 9 Mar 2016 17:56:02 +0100 Subject: [PATCH 27/88] clk: renesas: r8a7795: add PWM clock Signed-off-by: Ulrich Hecht Signed-off-by: Geert Uytterhoeven --- drivers/clk/renesas/r8a7795-cpg-mssr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c index b2198aef5ed42..9de458a6f7c88 100644 --- a/drivers/clk/renesas/r8a7795-cpg-mssr.c +++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c @@ -148,6 +148,7 @@ static const struct mssr_mod_clk r8a7795_mod_clks[] __initconst = { DEF_MOD("hscif2", 518, R8A7795_CLK_S3D1), DEF_MOD("hscif1", 519, R8A7795_CLK_S3D1), DEF_MOD("hscif0", 520, R8A7795_CLK_S3D1), + DEF_MOD("pwm", 523, R8A7795_CLK_S3D4), DEF_MOD("fcpvd3", 600, R8A7795_CLK_S2D1), DEF_MOD("fcpvd2", 601, R8A7795_CLK_S2D1), DEF_MOD("fcpvd1", 602, R8A7795_CLK_S2D1), From ba8c1a81d4b7c22ac2d767265851ad77c4d01002 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 24 Mar 2016 13:50:41 +0100 Subject: [PATCH 28/88] clk: renesas: r8a7795: make SD clk definition specific for GEN3 About SD clocks: The clock type is Gen3 specific, the callbacks are all Gen3 specific; I think the clock definition should also be Gen3 specific and not in the general header file. Signed-off-by: Wolfram Sang Signed-off-by: Geert Uytterhoeven --- drivers/clk/renesas/r8a7795-cpg-mssr.c | 11 +++++++---- drivers/clk/renesas/renesas-cpg-mssr.h | 3 --- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c index 9de458a6f7c88..9dc2b735ead85 100644 --- a/drivers/clk/renesas/r8a7795-cpg-mssr.c +++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c @@ -65,6 +65,9 @@ enum r8a7795_clk_types { CLK_TYPE_GEN3_SD, }; +#define DEF_GEN3_SD(_name, _id, _parent, _offset) \ + DEF_BASE(_name, _id, CLK_TYPE_GEN3_SD, _parent, .offset = _offset) + static const struct cpg_core_clk r8a7795_core_clks[] __initconst = { /* External Clock Inputs */ DEF_INPUT("extal", CLK_EXTAL), @@ -102,10 +105,10 @@ static const struct cpg_core_clk r8a7795_core_clks[] __initconst = { DEF_FIXED("s3d2", R8A7795_CLK_S3D2, CLK_S3, 2, 1), DEF_FIXED("s3d4", R8A7795_CLK_S3D4, CLK_S3, 4, 1), - DEF_SD("sd0", R8A7795_CLK_SD0, CLK_PLL1_DIV2, 0x0074), - DEF_SD("sd1", R8A7795_CLK_SD1, CLK_PLL1_DIV2, 0x0078), - DEF_SD("sd2", R8A7795_CLK_SD2, CLK_PLL1_DIV2, 0x0268), - DEF_SD("sd3", R8A7795_CLK_SD3, CLK_PLL1_DIV2, 0x026c), + DEF_GEN3_SD("sd0", R8A7795_CLK_SD0, CLK_PLL1_DIV2, 0x0074), + DEF_GEN3_SD("sd1", R8A7795_CLK_SD1, CLK_PLL1_DIV2, 0x0078), + DEF_GEN3_SD("sd2", R8A7795_CLK_SD2, CLK_PLL1_DIV2, 0x0268), + DEF_GEN3_SD("sd3", R8A7795_CLK_SD3, CLK_PLL1_DIV2, 0x026c), DEF_FIXED("cl", R8A7795_CLK_CL, CLK_PLL1_DIV2, 48, 1), DEF_FIXED("cp", R8A7795_CLK_CP, CLK_EXTAL, 2, 1), diff --git a/drivers/clk/renesas/renesas-cpg-mssr.h b/drivers/clk/renesas/renesas-cpg-mssr.h index 952b6957233b4..cad3c7d1b0c6f 100644 --- a/drivers/clk/renesas/renesas-cpg-mssr.h +++ b/drivers/clk/renesas/renesas-cpg-mssr.h @@ -53,9 +53,6 @@ enum clk_types { DEF_BASE(_name, _id, CLK_TYPE_FF, _parent, .div = _div, .mult = _mult) #define DEF_DIV6P1(_name, _id, _parent, _offset) \ DEF_BASE(_name, _id, CLK_TYPE_DIV6P1, _parent, .offset = _offset) -#define DEF_SD(_name, _id, _parent, _offset) \ - DEF_BASE(_name, _id, CLK_TYPE_GEN3_SD, _parent, .offset = _offset) - /* * Definitions of Module Clocks From 5d3927f655e58e644557a3dc8ee7af8884f59931 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 30 Mar 2016 16:58:18 +0200 Subject: [PATCH 29/88] clk: renesas: cpg-mssr: add generic support for read-only DIV6 clocks Gen3 has two clocks (OSC and R) which look like a DIV6 clock but their divider value is read-only and depends on MD pins at bootup. Add support for such clocks by reading the value and adding a fixed clock. Signed-off-by: Wolfram Sang Signed-off-by: Geert Uytterhoeven --- drivers/clk/renesas/renesas-cpg-mssr.c | 18 ++++++++++++------ drivers/clk/renesas/renesas-cpg-mssr.h | 3 +++ 2 files changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c index 58e24b326a48b..3e4d2609cc029 100644 --- a/drivers/clk/renesas/renesas-cpg-mssr.c +++ b/drivers/clk/renesas/renesas-cpg-mssr.c @@ -253,7 +253,7 @@ static void __init cpg_mssr_register_core_clk(const struct cpg_core_clk *core, { struct clk *clk = NULL, *parent; struct device *dev = priv->dev; - unsigned int id = core->id; + unsigned int id = core->id, div = core->div; const char *parent_name; WARN_DEBUG(id >= priv->num_core_clks); @@ -266,6 +266,7 @@ static void __init cpg_mssr_register_core_clk(const struct cpg_core_clk *core, case CLK_TYPE_FF: case CLK_TYPE_DIV6P1: + case CLK_TYPE_DIV6_RO: WARN_DEBUG(core->parent >= priv->num_core_clks); parent = priv->clks[core->parent]; if (IS_ERR(parent)) { @@ -274,13 +275,18 @@ static void __init cpg_mssr_register_core_clk(const struct cpg_core_clk *core, } parent_name = __clk_get_name(parent); - if (core->type == CLK_TYPE_FF) { - clk = clk_register_fixed_factor(NULL, core->name, - parent_name, 0, - core->mult, core->div); - } else { + + if (core->type == CLK_TYPE_DIV6_RO) + /* Multiply with the DIV6 register value */ + div *= (readl(priv->base + core->offset) & 0x3f) + 1; + + if (core->type == CLK_TYPE_DIV6P1) { clk = cpg_div6_register(core->name, 1, &parent_name, priv->base + core->offset); + } else { + clk = clk_register_fixed_factor(NULL, core->name, + parent_name, 0, + core->mult, div); } break; diff --git a/drivers/clk/renesas/renesas-cpg-mssr.h b/drivers/clk/renesas/renesas-cpg-mssr.h index cad3c7d1b0c6f..0d1e3e811e79b 100644 --- a/drivers/clk/renesas/renesas-cpg-mssr.h +++ b/drivers/clk/renesas/renesas-cpg-mssr.h @@ -37,6 +37,7 @@ enum clk_types { CLK_TYPE_IN, /* External Clock Input */ CLK_TYPE_FF, /* Fixed Factor Clock */ CLK_TYPE_DIV6P1, /* DIV6 Clock with 1 parent clock */ + CLK_TYPE_DIV6_RO, /* DIV6 Clock read only with extra divisor */ /* Custom definitions start here */ CLK_TYPE_CUSTOM, @@ -53,6 +54,8 @@ enum clk_types { DEF_BASE(_name, _id, CLK_TYPE_FF, _parent, .div = _div, .mult = _mult) #define DEF_DIV6P1(_name, _id, _parent, _offset) \ DEF_BASE(_name, _id, CLK_TYPE_DIV6P1, _parent, .offset = _offset) +#define DEF_DIV6_RO(_name, _id, _parent, _offset, _div) \ + DEF_BASE(_name, _id, CLK_TYPE_DIV6_RO, _parent, .offset = _offset, .div = _div, .mult = 1) /* * Definitions of Module Clocks From 5524a67f3a4ad8625cab6a9b99419f747cea4c71 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 30 Mar 2016 16:58:19 +0200 Subject: [PATCH 30/88] clk: renesas: r8a7795: add OSC and RINT clocks Signed-off-by: Wolfram Sang Signed-off-by: Geert Uytterhoeven --- drivers/clk/renesas/r8a7795-cpg-mssr.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c index 9dc2b735ead85..08715ca2ebb49 100644 --- a/drivers/clk/renesas/r8a7795-cpg-mssr.c +++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c @@ -26,6 +26,7 @@ #include "renesas-cpg-mssr.h" +#define CPG_RCKCR 0x240 enum clk_ids { /* Core Clock Outputs exported to DT */ @@ -50,6 +51,7 @@ enum clk_ids { CLK_S3, CLK_SDSRC, CLK_SSPSRC, + CLK_RINT, /* Module Clocks */ MOD_CLK_BASE @@ -116,6 +118,9 @@ static const struct cpg_core_clk r8a7795_core_clks[] __initconst = { DEF_DIV6P1("mso", R8A7795_CLK_MSO, CLK_PLL1_DIV4, 0x014), DEF_DIV6P1("hdmi", R8A7795_CLK_HDMI, CLK_PLL1_DIV2, 0x250), DEF_DIV6P1("canfd", R8A7795_CLK_CANFD, CLK_PLL1_DIV4, 0x244), + + DEF_DIV6_RO("osc", R8A7795_CLK_OSC, CLK_EXTAL, CPG_RCKCR, 8), + DEF_DIV6_RO("r_int", CLK_RINT, CLK_EXTAL, CPG_RCKCR, 32), }; static const struct mssr_mod_clk r8a7795_mod_clks[] __initconst = { From 1e6237e32ef4bf4104a8ef14cece60541e11e14d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 30 Mar 2016 16:58:20 +0200 Subject: [PATCH 31/88] clk: renesas: r8a7795: add R clk R can select between two parents. We deal with it like this: During initialization, check if EXTALR is populated. If so, use it for R. If not, use R_Internal. clk_mux doesn't help here because we don't want to switch parents depending on the clock rate. The clock rate (and source) should stay constant for the watchdog, so I think a setup like this during initialization makes sense. Signed-off-by: Wolfram Sang Signed-off-by: Geert Uytterhoeven --- drivers/clk/renesas/r8a7795-cpg-mssr.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c index 08715ca2ebb49..19b0264577187 100644 --- a/drivers/clk/renesas/r8a7795-cpg-mssr.c +++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c @@ -13,6 +13,7 @@ */ #include +#include #include #include #include @@ -65,6 +66,7 @@ enum r8a7795_clk_types { CLK_TYPE_GEN3_PLL3, CLK_TYPE_GEN3_PLL4, CLK_TYPE_GEN3_SD, + CLK_TYPE_GEN3_R, }; #define DEF_GEN3_SD(_name, _id, _parent, _offset) \ @@ -121,6 +123,8 @@ static const struct cpg_core_clk r8a7795_core_clks[] __initconst = { DEF_DIV6_RO("osc", R8A7795_CLK_OSC, CLK_EXTAL, CPG_RCKCR, 8), DEF_DIV6_RO("r_int", CLK_RINT, CLK_EXTAL, CPG_RCKCR, 32), + + DEF_BASE("r", R8A7795_CLK_R, CLK_TYPE_GEN3_R, CLK_RINT), }; static const struct mssr_mod_clk r8a7795_mod_clks[] __initconst = { @@ -587,6 +591,18 @@ struct clk * __init r8a7795_cpg_clk_register(struct device *dev, case CLK_TYPE_GEN3_SD: return cpg_sd_clk_register(core, base, __clk_get_name(parent)); + case CLK_TYPE_GEN3_R: + /* RINT is default. Only if EXTALR is populated, we switch to it */ + value = readl(base + CPG_RCKCR) & 0x3f; + + if (clk_get_rate(clks[CLK_EXTALR])) { + parent = clks[CLK_EXTALR]; + value |= BIT(15); + } + + writel(value, base + CPG_RCKCR); + break; + default: return ERR_PTR(-EINVAL); } From 6248620b30403bcbe3ef308499026226e999597c Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 30 Mar 2016 16:58:21 +0200 Subject: [PATCH 32/88] clk: renesas: r8a7795: add RWDT clock Signed-off-by: Wolfram Sang Signed-off-by: Geert Uytterhoeven --- drivers/clk/renesas/r8a7795-cpg-mssr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c index 19b0264577187..6af7f5b6e8240 100644 --- a/drivers/clk/renesas/r8a7795-cpg-mssr.c +++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c @@ -151,6 +151,7 @@ static const struct mssr_mod_clk r8a7795_mod_clks[] __initconst = { DEF_MOD("usb3-if0", 328, R8A7795_CLK_S3D1), DEF_MOD("usb-dmac0", 330, R8A7795_CLK_S3D1), DEF_MOD("usb-dmac1", 331, R8A7795_CLK_S3D1), + DEF_MOD("rwdt0", 402, R8A7795_CLK_R), DEF_MOD("intc-ex", 407, R8A7795_CLK_CP), DEF_MOD("intc-ap", 408, R8A7795_CLK_S3D1), DEF_MOD("audmac0", 502, R8A7795_CLK_S3D4), From 848fc67da5fb43ef7d92d20891eef79f5de45816 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 4 Mar 2016 15:32:40 +0100 Subject: [PATCH 33/88] clk: renesas: mstp: Drop check for CONFIG_PM_GENERIC_DOMAINS_OF As of commit 71d076ceb245f0d9 ("ARM: shmobile: Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains"), CONFIG_PM_GENERIC_DOMAINS_OF is always enabled for SoCs with MSTP clocks. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart --- drivers/clk/renesas/clk-mstp.c | 3 --- include/linux/clk/renesas.h | 4 ---- 2 files changed, 7 deletions(-) diff --git a/drivers/clk/renesas/clk-mstp.c b/drivers/clk/renesas/clk-mstp.c index 3d44e183aedd6..5e3b3d856eefc 100644 --- a/drivers/clk/renesas/clk-mstp.c +++ b/drivers/clk/renesas/clk-mstp.c @@ -243,8 +243,6 @@ static void __init cpg_mstp_clocks_init(struct device_node *np) } CLK_OF_DECLARE(cpg_mstp_clks, "renesas,cpg-mstp-clocks", cpg_mstp_clocks_init); - -#ifdef CONFIG_PM_GENERIC_DOMAINS_OF int cpg_mstp_attach_dev(struct generic_pm_domain *domain, struct device *dev) { struct device_node *np = dev->of_node; @@ -326,4 +324,3 @@ void __init cpg_mstp_add_clk_domain(struct device_node *np) of_genpd_add_provider_simple(np, pd); } -#endif /* !CONFIG_PM_GENERIC_DOMAINS_OF */ diff --git a/include/linux/clk/renesas.h b/include/linux/clk/renesas.h index 7adfd80fbf55d..2a3379cf13304 100644 --- a/include/linux/clk/renesas.h +++ b/include/linux/clk/renesas.h @@ -24,12 +24,8 @@ void r8a7778_clocks_init(u32 mode); void r8a7779_clocks_init(u32 mode); void rcar_gen2_clocks_init(u32 mode); -#ifdef CONFIG_PM_GENERIC_DOMAINS_OF void cpg_mstp_add_clk_domain(struct device_node *np); int cpg_mstp_attach_dev(struct generic_pm_domain *domain, struct device *dev); void cpg_mstp_detach_dev(struct generic_pm_domain *domain, struct device *dev); -#else -static inline void cpg_mstp_add_clk_domain(struct device_node *np) {} -#endif #endif From da437d2d09de0af1ffd7ae3d88317ef1bf7f9456 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 4 Mar 2016 15:36:33 +0100 Subject: [PATCH 34/88] clk: renesas: cpg-mssr: Drop check for CONFIG_PM_GENERIC_DOMAINS_OF As of commit 71d076ceb245f0d9 ("ARM: shmobile: Enable PM and PM_GENERIC_DOMAINS for SoCs with PM Domains"), CONFIG_PM_GENERIC_DOMAINS_OF is always enabled for SoCs with a CPG/MSSR block. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart --- drivers/clk/renesas/renesas-cpg-mssr.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c index 3e4d2609cc029..703bdb157528e 100644 --- a/drivers/clk/renesas/renesas-cpg-mssr.c +++ b/drivers/clk/renesas/renesas-cpg-mssr.c @@ -381,8 +381,6 @@ static void __init cpg_mssr_register_mod_clk(const struct mssr_mod_clk *mod, kfree(clock); } - -#ifdef CONFIG_PM_GENERIC_DOMAINS_OF struct cpg_mssr_clk_domain { struct generic_pm_domain genpd; struct device_node *np; @@ -497,15 +495,6 @@ static int __init cpg_mssr_add_clk_domain(struct device *dev, of_genpd_add_provider_simple(np, genpd); return 0; } -#else -static inline int cpg_mssr_add_clk_domain(struct device *dev, - const unsigned int *core_pm_clks, - unsigned int num_core_pm_clks) -{ - return 0; -} -#endif /* !CONFIG_PM_GENERIC_DOMAINS_OF */ - static const struct of_device_id cpg_mssr_match[] = { #ifdef CONFIG_ARCH_R8A7795 From 12a56817b329d8a73ab53bad09aa976aeea46db9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 4 Mar 2016 16:59:26 +0100 Subject: [PATCH 35/88] clk: renesas: mstp: Clarify cpg_mstp_{at,de}tach_dev() domain parameter Make it clear that the "domain" parameter of the cpg_mstp_attach_dev() and cpg_mstp_detach_dev() functions is not used. The cpg_mstp_attach_dev() and cpg_mstp_detach_dev() callbacks are not only used by the CPG/MSTP Clock Domain driver, but also by the R-Mobile SYSC PM Domain driver. Signed-off-by: Geert Uytterhoeven --- drivers/clk/renesas/clk-mstp.c | 4 ++-- include/linux/clk/renesas.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/clk/renesas/clk-mstp.c b/drivers/clk/renesas/clk-mstp.c index 5e3b3d856eefc..8b597b9a38044 100644 --- a/drivers/clk/renesas/clk-mstp.c +++ b/drivers/clk/renesas/clk-mstp.c @@ -243,7 +243,7 @@ static void __init cpg_mstp_clocks_init(struct device_node *np) } CLK_OF_DECLARE(cpg_mstp_clks, "renesas,cpg-mstp-clocks", cpg_mstp_clocks_init); -int cpg_mstp_attach_dev(struct generic_pm_domain *domain, struct device *dev) +int cpg_mstp_attach_dev(struct generic_pm_domain *unused, struct device *dev) { struct device_node *np = dev->of_node; struct of_phandle_args clkspec; @@ -295,7 +295,7 @@ int cpg_mstp_attach_dev(struct generic_pm_domain *domain, struct device *dev) return error; } -void cpg_mstp_detach_dev(struct generic_pm_domain *domain, struct device *dev) +void cpg_mstp_detach_dev(struct generic_pm_domain *unused, struct device *dev) { if (!list_empty(&dev->power.subsys_data->clock_list)) pm_clk_destroy(dev); diff --git a/include/linux/clk/renesas.h b/include/linux/clk/renesas.h index 2a3379cf13304..095b1681daf46 100644 --- a/include/linux/clk/renesas.h +++ b/include/linux/clk/renesas.h @@ -25,7 +25,7 @@ void r8a7779_clocks_init(u32 mode); void rcar_gen2_clocks_init(u32 mode); void cpg_mstp_add_clk_domain(struct device_node *np); -int cpg_mstp_attach_dev(struct generic_pm_domain *domain, struct device *dev); -void cpg_mstp_detach_dev(struct generic_pm_domain *domain, struct device *dev); +int cpg_mstp_attach_dev(struct generic_pm_domain *unused, struct device *dev); +void cpg_mstp_detach_dev(struct generic_pm_domain *unused, struct device *dev); #endif From a85fff3b01ac1d67d9ef15672a9b5b5a4a44204e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Apr 2016 16:44:17 +0200 Subject: [PATCH 36/88] PM / Domains: Add DT bindings for the R-Car System Controller The Renesas R-Car System Controller provides power management for the CPU cores and various coprocessors, following the generic PM domain bindings in Documentation/devicetree/bindings/power/power_domain.txt. This supports R-Car Gen1 (H1), Gen2, and Gen3. Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Acked-by: Rob Herring Signed-off-by: Simon Horman --- .../bindings/power/renesas,rcar-sysc.txt | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt new file mode 100644 index 0000000000000..b74e4d4785ab2 --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt @@ -0,0 +1,48 @@ +DT bindings for the Renesas R-Car System Controller + +== System Controller Node == + +The R-Car System Controller provides power management for the CPU cores and +various coprocessors. + +Required properties: + - compatible: Must contain exactly one of the following: + - "renesas,r8a7779-sysc" (R-Car H1) + - "renesas,r8a7790-sysc" (R-Car H2) + - "renesas,r8a7791-sysc" (R-Car M2-W) + - "renesas,r8a7792-sysc" (R-Car V2H) + - "renesas,r8a7793-sysc" (R-Car M2-N) + - "renesas,r8a7794-sysc" (R-Car E2) + - "renesas,r8a7795-sysc" (R-Car H3) + - reg: Address start and address range for the device. + - #power-domain-cells: Must be 1. + + +Example: + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7791-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + + +== PM Domain Consumers == + +Devices residing in a power area must refer to that power area, as documented +by the generic PM domain bindings in +Documentation/devicetree/bindings/power/power_domain.txt. + +Required properties: + - power-domains: A phandle and symbolic PM domain specifier, as defined in + . + + +Example: + + L2_CA15: cache-controller@0 { + compatible = "cache"; + power-domains = <&sysc R8A7791_PD_CA15_SCU>; + cache-unified; + cache-level = <2>; + }; From 79bca98cfb91d4b8dca6af1e865676f7677ca8f2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Apr 2016 16:44:18 +0200 Subject: [PATCH 37/88] soc: renesas: Add r8a7779 SYSC PM Domain Binding Definitions Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- include/dt-bindings/power/r8a7779-sysc.h | 27 ++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 include/dt-bindings/power/r8a7779-sysc.h diff --git a/include/dt-bindings/power/r8a7779-sysc.h b/include/dt-bindings/power/r8a7779-sysc.h new file mode 100644 index 0000000000000..183571da507e5 --- /dev/null +++ b/include/dt-bindings/power/r8a7779-sysc.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ +#ifndef __DT_BINDINGS_POWER_R8A7779_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A7779_SYSC_H__ + +/* + * These power domain indices match the numbers of the interrupt bits + * representing the power areas in the various Interrupt Registers + * (e.g. SYSCISR, Interrupt Status Register) + */ + +#define R8A7779_PD_ARM1 1 +#define R8A7779_PD_ARM2 2 +#define R8A7779_PD_ARM3 3 +#define R8A7779_PD_SGX 20 +#define R8A7779_PD_VDP 21 +#define R8A7779_PD_IMP 24 + +/* Always-on power area */ +#define R8A7779_PD_ALWAYS_ON 32 + +#endif /* __DT_BINDINGS_POWER_R8A7779_SYSC_H__ */ From 3dc4c00a33a82824b710892be4b059637c99cabf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Apr 2016 16:44:19 +0200 Subject: [PATCH 38/88] soc: renesas: Add r8a7790 SYSC PM Domain Binding Definitions Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- include/dt-bindings/power/r8a7790-sysc.h | 34 ++++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 include/dt-bindings/power/r8a7790-sysc.h diff --git a/include/dt-bindings/power/r8a7790-sysc.h b/include/dt-bindings/power/r8a7790-sysc.h new file mode 100644 index 0000000000000..6af4e9929bd04 --- /dev/null +++ b/include/dt-bindings/power/r8a7790-sysc.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ +#ifndef __DT_BINDINGS_POWER_R8A7790_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A7790_SYSC_H__ + +/* + * These power domain indices match the numbers of the interrupt bits + * representing the power areas in the various Interrupt Registers + * (e.g. SYSCISR, Interrupt Status Register) + */ + +#define R8A7790_PD_CA15_CPU0 0 +#define R8A7790_PD_CA15_CPU1 1 +#define R8A7790_PD_CA15_CPU2 2 +#define R8A7790_PD_CA15_CPU3 3 +#define R8A7790_PD_CA7_CPU0 5 +#define R8A7790_PD_CA7_CPU1 6 +#define R8A7790_PD_CA7_CPU2 7 +#define R8A7790_PD_CA7_CPU3 8 +#define R8A7790_PD_CA15_SCU 12 +#define R8A7790_PD_SH_4A 16 +#define R8A7790_PD_RGX 20 +#define R8A7790_PD_CA7_SCU 21 +#define R8A7790_PD_IMP 24 + +/* Always-on power area */ +#define R8A7790_PD_ALWAYS_ON 32 + +#endif /* __DT_BINDINGS_POWER_R8A7790_SYSC_H__ */ From 434ac75a28d8b2aec08b6b8e080d793857c1b090 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Apr 2016 16:44:20 +0200 Subject: [PATCH 39/88] soc: renesas: Add r8a7791 SYSC PM Domain Binding Definitions Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- include/dt-bindings/power/r8a7791-sysc.h | 26 ++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 include/dt-bindings/power/r8a7791-sysc.h diff --git a/include/dt-bindings/power/r8a7791-sysc.h b/include/dt-bindings/power/r8a7791-sysc.h new file mode 100644 index 0000000000000..1403baa0514fb --- /dev/null +++ b/include/dt-bindings/power/r8a7791-sysc.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ +#ifndef __DT_BINDINGS_POWER_R8A7791_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A7791_SYSC_H__ + +/* + * These power domain indices match the numbers of the interrupt bits + * representing the power areas in the various Interrupt Registers + * (e.g. SYSCISR, Interrupt Status Register) + */ + +#define R8A7791_PD_CA15_CPU0 0 +#define R8A7791_PD_CA15_CPU1 1 +#define R8A7791_PD_CA15_SCU 12 +#define R8A7791_PD_SH_4A 16 +#define R8A7791_PD_SGX 20 + +/* Always-on power area */ +#define R8A7791_PD_ALWAYS_ON 32 + +#endif /* __DT_BINDINGS_POWER_R8A7791_SYSC_H__ */ From a6171412725e4e7e510a2b91a1d79dbc2ef0e679 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Apr 2016 16:44:21 +0200 Subject: [PATCH 40/88] soc: renesas: Add r8a7793 SYSC PM Domain Binding Definitions R-Car M2-N is identical to R-Car M2-W w.r.t. power domains, so reuse the definitions from the latter. Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- include/dt-bindings/power/r8a7793-sysc.h | 28 ++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 include/dt-bindings/power/r8a7793-sysc.h diff --git a/include/dt-bindings/power/r8a7793-sysc.h b/include/dt-bindings/power/r8a7793-sysc.h new file mode 100644 index 0000000000000..b5693df3d830e --- /dev/null +++ b/include/dt-bindings/power/r8a7793-sysc.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ +#ifndef __DT_BINDINGS_POWER_R8A7793_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A7793_SYSC_H__ + +/* + * These power domain indices match the numbers of the interrupt bits + * representing the power areas in the various Interrupt Registers + * (e.g. SYSCISR, Interrupt Status Register) + * + * Note that R-Car M2-N is identical to R-Car M2-W w.r.t. power domains. + */ + +#define R8A7793_PD_CA15_CPU0 0 +#define R8A7793_PD_CA15_CPU1 1 +#define R8A7793_PD_CA15_SCU 12 +#define R8A7793_PD_SH_4A 16 +#define R8A7793_PD_SGX 20 + +/* Always-on power area */ +#define R8A7793_PD_ALWAYS_ON 32 + +#endif /* __DT_BINDINGS_POWER_R8A7793_SYSC_H__ */ From 353cf9961acf5e0db8a6cb6f24333ad76dacb8fc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Apr 2016 16:44:22 +0200 Subject: [PATCH 41/88] soc: renesas: Add r8a7794 SYSC PM Domain Binding Definitions Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- include/dt-bindings/power/r8a7794-sysc.h | 26 ++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 include/dt-bindings/power/r8a7794-sysc.h diff --git a/include/dt-bindings/power/r8a7794-sysc.h b/include/dt-bindings/power/r8a7794-sysc.h new file mode 100644 index 0000000000000..862241c2d27b2 --- /dev/null +++ b/include/dt-bindings/power/r8a7794-sysc.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ +#ifndef __DT_BINDINGS_POWER_R8A7794_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A7794_SYSC_H__ + +/* + * These power domain indices match the numbers of the interrupt bits + * representing the power areas in the various Interrupt Registers + * (e.g. SYSCISR, Interrupt Status Register) + */ + +#define R8A7794_PD_CA7_CPU0 5 +#define R8A7794_PD_CA7_CPU1 6 +#define R8A7794_PD_SH_4A 16 +#define R8A7794_PD_SGX 20 +#define R8A7794_PD_CA7_SCU 21 + +/* Always-on power area */ +#define R8A7794_PD_ALWAYS_ON 32 + +#endif /* __DT_BINDINGS_POWER_R8A7794_SYSC_H__ */ From 839a04d847f5871516f500091519c52dc40fe01d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Apr 2016 16:44:23 +0200 Subject: [PATCH 42/88] soc: renesas: Add r8a7795 SYSC PM Domain Binding Definitions Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- include/dt-bindings/power/r8a7795-sysc.h | 42 ++++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 include/dt-bindings/power/r8a7795-sysc.h diff --git a/include/dt-bindings/power/r8a7795-sysc.h b/include/dt-bindings/power/r8a7795-sysc.h new file mode 100644 index 0000000000000..ee2e26ba605ef --- /dev/null +++ b/include/dt-bindings/power/r8a7795-sysc.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ +#ifndef __DT_BINDINGS_POWER_R8A7795_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A7795_SYSC_H__ + +/* + * These power domain indices match the numbers of the interrupt bits + * representing the power areas in the various Interrupt Registers + * (e.g. SYSCISR, Interrupt Status Register) + */ + +#define R8A7795_PD_CA57_CPU0 0 +#define R8A7795_PD_CA57_CPU1 1 +#define R8A7795_PD_CA57_CPU2 2 +#define R8A7795_PD_CA57_CPU3 3 +#define R8A7795_PD_CA53_CPU0 5 +#define R8A7795_PD_CA53_CPU1 6 +#define R8A7795_PD_CA53_CPU2 7 +#define R8A7795_PD_CA53_CPU3 8 +#define R8A7795_PD_A3VP 9 +#define R8A7795_PD_CA57_SCU 12 +#define R8A7795_PD_CR7 13 +#define R8A7795_PD_A3VC 14 +#define R8A7795_PD_3DG_A 17 +#define R8A7795_PD_3DG_B 18 +#define R8A7795_PD_3DG_C 19 +#define R8A7795_PD_3DG_D 20 +#define R8A7795_PD_CA53_SCU 21 +#define R8A7795_PD_3DG_E 22 +#define R8A7795_PD_A3IR 24 +#define R8A7795_PD_A2VC0 25 +#define R8A7795_PD_A2VC1 26 + +/* Always-on power area */ +#define R8A7795_PD_ALWAYS_ON 32 + +#endif /* __DT_BINDINGS_POWER_R8A7795_SYSC_H__ */ From 1c4b68fdd52e05730591682bc62042cead6f5af3 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 24 Feb 2016 11:29:05 +0900 Subject: [PATCH 43/88] ARM: dts: r8a7790: use fallback jpu compatibility string Use recently added fallback compatibility string in r8a7790 device trees. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7790.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 283698fc0fea2..60db8e4f57904 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -990,7 +990,7 @@ }; jpu: jpeg-codec@fe980000 { - compatible = "renesas,jpu-r8a7790"; + compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu"; reg = <0 0xfe980000 0 0x10300>; interrupts = ; clocks = <&mstp1_clks R8A7790_CLK_JPU>; From 803f7e0b23d3a7cb3f038df786df4faf2e0c752a Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 24 Feb 2016 11:29:06 +0900 Subject: [PATCH 44/88] ARM: dts: r8a7791: use fallback jpu compatibility string Use recently added fallback compatibility string in r8a7791 device tree. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7791.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 8010d935300fa..d4de6db1143b2 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1035,7 +1035,7 @@ }; jpu: jpeg-codec@fe980000 { - compatible = "renesas,jpu-r8a7791"; + compatible = "renesas,jpu-r8a7791", "renesas,rcar-gen2-jpu"; reg = <0 0xfe980000 0 0x10300>; interrupts = ; clocks = <&mstp1_clks R8A7791_CLK_JPU>; From 38805823377d762ec46f2430f29ef0cb8b3937d4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 3 Mar 2016 10:32:40 +0100 Subject: [PATCH 45/88] ARM: dts: r8a7790: Add SCIF2 clock Based on Rev. 2.00 of the R-Car Gen2 datasheet. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 6 +++--- include/dt-bindings/clock/r8a7790-clock.h | 1 + 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 60db8e4f57904..6f4fdfccdcfd9 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1302,19 +1302,19 @@ mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, + clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&p_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; clock-indices = < - R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 + R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SCIF2 R8A7790_CLK_SDHI3 R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0 R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1 R8A7790_CLK_USBDMAC0 R8A7790_CLK_USBDMAC1 >; clock-output-names = - "iic2", "tpu0", "mmcif1", "sdhi3", + "iic2", "tpu0", "mmcif1", "scif2", "sdhi3", "sdhi2", "sdhi1", "sdhi0", "mmcif0", "iic0", "pciec", "iic1", "ssusb", "cmt1", "usbdmac0", "usbdmac1"; diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h index 7b1ad8922eecd..fa5e8da809f2e 100644 --- a/include/dt-bindings/clock/r8a7790-clock.h +++ b/include/dt-bindings/clock/r8a7790-clock.h @@ -66,6 +66,7 @@ #define R8A7790_CLK_IIC2 0 #define R8A7790_CLK_TPU0 4 #define R8A7790_CLK_MMCIF1 5 +#define R8A7790_CLK_SCIF2 10 #define R8A7790_CLK_SDHI3 11 #define R8A7790_CLK_SDHI2 12 #define R8A7790_CLK_SDHI1 13 From 022869a2c4e15c3b615dd278d59e0fa82e5a8449 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 3 Mar 2016 10:32:41 +0100 Subject: [PATCH 46/88] ARM: dts: r8a7790: Add SCIF2 device node Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 6f4fdfccdcfd9..e96f8a4cb66f2 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -732,6 +732,20 @@ status = "disabled"; }; + scif2: serial@e6e56000 { + compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif", + "renesas,scif"; + reg = <0 0xe6e56000 0 64>; + interrupts = ; + clocks = <&mstp3_clks R8A7790_CLK_SCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + hscif0: serial@e62c0000 { compatible = "renesas,hscif-r8a7790", "renesas,rcar-gen2-hscif", "renesas,hscif"; From 73ae9cfecd069060e7bf182250e16ff8c598f997 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 14 Mar 2016 11:13:58 +0900 Subject: [PATCH 47/88] ARM: dts: r8a7791: use fallback can compatibility string Use recently added fallback compatibility string in r8a7791 device tree. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7791.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index d4de6db1143b2..6122a7919c9fb 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1013,7 +1013,7 @@ }; can0: can@e6e80000 { - compatible = "renesas,can-r8a7791"; + compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; reg = <0 0xe6e80000 0 0x1000>; interrupts = ; clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, @@ -1024,7 +1024,7 @@ }; can1: can@e6e88000 { - compatible = "renesas,can-r8a7791"; + compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; reg = <0 0xe6e88000 0 0x1000>; interrupts = ; clocks = <&mstp9_clks R8A7791_CLK_RCAN1>, From 28e941de3dc7105ab3c0c261814d4d53a6b8ddf4 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 14 Mar 2016 11:13:59 +0900 Subject: [PATCH 48/88] ARM: dts: r8a7790: use fallback can compatibility string Use recently added fallback compatibility string in r8a7790 device tree. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7790.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index e96f8a4cb66f2..7cf52e6da9569 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -982,7 +982,7 @@ }; can0: can@e6e80000 { - compatible = "renesas,can-r8a7790"; + compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can"; reg = <0 0xe6e80000 0 0x1000>; interrupts = ; clocks = <&mstp9_clks R8A7790_CLK_RCAN0>, @@ -993,7 +993,7 @@ }; can1: can@e6e88000 { - compatible = "renesas,can-r8a7790"; + compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can"; reg = <0 0xe6e88000 0 0x1000>; interrupts = ; clocks = <&mstp9_clks R8A7790_CLK_RCAN1>, From e980f9418f45a3c0d53e54bc17bd48406060c2bb Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 15 Mar 2016 09:26:33 +0900 Subject: [PATCH 49/88] ARM: dts: r8a7794: add CAN clocks to device tree Add CAN nodes to r8a7794 device tree. Based on work by Sergei Shtylyov for the r8a7791 SoC. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven Acked-by: Ramesh Shanmugasundaram --- arch/arm/boot/dts/r8a7794.dtsi | 33 ++++++++++++++++++----- include/dt-bindings/clock/r8a7794-clock.h | 3 +++ 2 files changed, 29 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 7d7d18766540c..2d8835bdf3f63 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -843,6 +843,22 @@ clock-frequency = <0>; }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* External SCIF clock */ scif_clk: scif { compatible = "fixed-clock"; @@ -857,10 +873,11 @@ compatible = "renesas,r8a7794-cpg-clocks", "renesas,rcar-gen2-cpg-clocks"; reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>; + clocks = <&extal_clk &usb_extal_clk>; #clock-cells = <1>; clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "z"; + "lb", "qspi", "sdh", "sd0", "z", + "rcan"; #power-domain-cells = <0>; }; /* Variable factor clocks */ @@ -1115,20 +1132,22 @@ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cp_clk>, <&cp_clk>, <&cp_clk>, - <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>, - <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; + <&cp_clk>, <&cp_clk>, <&cp_clk>, <&p_clk>, + <&p_clk>, <&cpg_clocks R8A7794_CLK_QSPI>, + <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, + <&hp_clk>, <&hp_clk>; #clock-cells = <1>; clock-indices = ; clock-output-names = "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", - "gpio1", "gpio0", "qspi_mod", + "gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; }; mstp11_clks: mstp11_clks@e615099c { diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h index f843de6bf3776..9703fbdb81c83 100644 --- a/include/dt-bindings/clock/r8a7794-clock.h +++ b/include/dt-bindings/clock/r8a7794-clock.h @@ -21,6 +21,7 @@ #define R8A7794_CLK_SDH 6 #define R8A7794_CLK_SD0 7 #define R8A7794_CLK_Z 8 +#define R8A7794_CLK_RCAN 9 /* MSTP0 */ #define R8A7794_CLK_MSIOF0 0 @@ -95,6 +96,8 @@ #define R8A7794_CLK_GPIO2 10 #define R8A7794_CLK_GPIO1 11 #define R8A7794_CLK_GPIO0 12 +#define R8A7794_CLK_RCAN1 15 +#define R8A7794_CLK_RCAN0 16 #define R8A7794_CLK_QSPI_MOD 17 #define R8A7794_CLK_I2C5 25 #define R8A7794_CLK_I2C4 27 From 9f1c1a2c784d28d45d0cd18a44e45ddd15d7458f Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 15 Mar 2016 09:26:34 +0900 Subject: [PATCH 50/88] ARM: dts: r8a7794: add CAN nodes to device tree Add CAN nodes to r8a7794 device tree. Based on work by Sergei Shtylyov for the r8a7791 SoC. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven Acked-by: Ramesh Shanmugasundaram --- arch/arm/boot/dts/r8a7794.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 2d8835bdf3f63..a1ee2a82c3c07 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -830,6 +830,28 @@ }; }; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = ; + clocks = <&mstp9_clks R8A7794_CLK_RCAN0>, + <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = ; + clocks = <&mstp9_clks R8A7794_CLK_RCAN1>, + <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; From 7892e6c1be78a7b008722badd99e5abd0ad6007b Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 16 Mar 2016 10:52:55 +0900 Subject: [PATCH 51/88] ARM: dts: r8a7793: add CAN clocks to device tree The R-Car CAN controllers can derive the CAN bus clock not only from their peripheral clock input (clkp1) but also from the other internal clock (clkp2) and external clock fed on CAN_CLK pin. Describe those clocks in the device tree along with the USB_EXTAL clock from which clkp2 is derived. Based on work by Sergei Shtylyov for the r8a7791 SoC. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7793.dtsi | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 95bbed95b0c1b..0e609bdafaa9e 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -839,6 +839,22 @@ clock-frequency = <0>; }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + status = "disabled"; + }; + /* External SCIF clock */ scif_clk: scif { compatible = "fixed-clock"; @@ -853,7 +869,7 @@ compatible = "renesas,r8a7793-cpg-clocks", "renesas,rcar-gen2-cpg-clocks"; reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>; + clocks = <&extal_clk &usb_extal_clk>; #clock-cells = <1>; clock-output-names = "main", "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "z", @@ -1081,6 +1097,7 @@ reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&p_clk>, <&p_clk>, <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>, <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; @@ -1090,7 +1107,8 @@ R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4 R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2 R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0 - R8A7793_CLK_QSPI_MOD R8A7793_CLK_I2C5 + R8A7793_CLK_QSPI_MOD R8A7793_CLK_RCAN1 + R8A7793_CLK_RCAN0 R8A7793_CLK_I2C5 R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4 R8A7793_CLK_I2C3 R8A7793_CLK_I2C2 R8A7793_CLK_I2C1 R8A7793_CLK_I2C0 @@ -1098,8 +1116,9 @@ clock-output-names = "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", - "qspi_mod", "i2c5", "i2c6", "i2c4", - "i2c3", "i2c2", "i2c1", "i2c0"; + "rcan1", "rcan0", "qspi_mod", "i2c5", + "i2c6", "i2c4", "i2c3", "i2c2", "i2c1", + "i2c0"; }; mstp10_clks: mstp10_clks@e6150998 { compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; From a0e300ceb5259e8584ff67971981ac22580ef550 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 16 Mar 2016 10:52:56 +0900 Subject: [PATCH 52/88] ARM: dts: r8a7793: add CAN nodes to device tree Add CAN nodes to r8a7793 device tree. Based on work by Sergei Shtylyov for the r8a7791 SoC. Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7793.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 0e609bdafaa9e..bddc31283bd93 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -806,6 +806,28 @@ }; }; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = ; + clocks = <&mstp9_clks R8A7793_CLK_RCAN0>, + <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = ; + clocks = <&mstp9_clks R8A7793_CLK_RCAN1>, + <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; From a856b195d129059c71981b6d069085d611ad8d38 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 17 Mar 2016 16:33:10 +0900 Subject: [PATCH 53/88] ARM: dts: r8a7794: add IIC clocks Add IIC clocks to r8a7794 device tree. Based on similar work for the r8a7790 by Wolfram Sang. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7794.dtsi | 9 ++++++--- include/dt-bindings/clock/r8a7794-clock.h | 2 ++ 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index a1ee2a82c3c07..8b2060c87a767 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -1099,16 +1099,19 @@ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>, - <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>; + <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>, + <&hp_clk>, <&hp_clk>; #clock-cells = <1>; clock-indices = < R8A7794_CLK_SDHI2 R8A7794_CLK_SDHI1 R8A7794_CLK_SDHI0 - R8A7794_CLK_MMCIF0 R8A7794_CLK_CMT1 + R8A7794_CLK_MMCIF0 R8A7794_CLK_IIC0 + R8A7794_CLK_IIC1 R8A7794_CLK_CMT1 R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1 >; clock-output-names = "sdhi2", "sdhi1", "sdhi0", - "mmcif0", "cmt1", "usbdmac0", "usbdmac1"; + "mmcif0", "i2c6", "i2c7", + "cmt1", "usbdmac0", "usbdmac1"; }; mstp4_clks: mstp4_clks@e6150140 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h index 9703fbdb81c83..4d3ecd626c1fe 100644 --- a/include/dt-bindings/clock/r8a7794-clock.h +++ b/include/dt-bindings/clock/r8a7794-clock.h @@ -57,6 +57,8 @@ #define R8A7794_CLK_SDHI1 12 #define R8A7794_CLK_SDHI0 14 #define R8A7794_CLK_MMCIF0 15 +#define R8A7794_CLK_IIC0 18 +#define R8A7794_CLK_IIC1 23 #define R8A7794_CLK_CMT1 29 #define R8A7794_CLK_USBDMAC0 30 #define R8A7794_CLK_USBDMAC1 31 From aa9b992ea2d3c2cc48712c21d1e680318d4156e2 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 17 Mar 2016 16:35:17 +0900 Subject: [PATCH 54/88] ARM: dts: r8a7794: Add IIC nodes Add IIC nodes to r8a7794 device tree. Based on similar work for the r8a7793 by Laurent Pinchart. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7794.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 8b2060c87a767..b0bce43779f14 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -26,6 +26,8 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; spi0 = &qspi; vin0 = &vin0; vin1 = &vin1; @@ -629,6 +631,32 @@ status = "disabled"; }; + i2c6: i2c@e6500000 { + compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = ; + clocks = <&mstp3_clks R8A7794_CLK_IIC0>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@e6510000 { + compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = ; + clocks = <&mstp3_clks R8A7794_CLK_IIC1>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; From a4a72b473e2897265a0fecbd5f6b5a92ea62585f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 18 Mar 2016 11:19:20 +0100 Subject: [PATCH 55/88] ARM: dts: sh73a0: Correct interrupt type for ARM TWD The ARM TWD interrupt is a private peripheral interrupt (PPI), and per the ARM GIC documentation, whether the type for PPIs can be set is IMPLEMENTATION DEFINED. For SH-Mobile AG5 devices the PPI type cannot be set, and so when we attempt to set the type for the ARM TWD interrupt it fails. This has gone unnoticed because it fails silently, and because we cannot re-configure the type it has had no impact. Nevertheless fix the type for the TWD interrupt so that it matches the hardware configuration. Based on patches by Jon Hunter for Tegra20/30 and OMAP4. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/sh73a0.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 639ea2d76970c..c4f434cdec60f 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -43,7 +43,7 @@ timer@f0000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xf0000600 0x20>; - interrupts = ; + interrupts = ; clocks = <&twd_clk>; }; From e6c2488251b1c7e62f3e43907ca3f6fd016b1353 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 18 Mar 2016 11:19:21 +0100 Subject: [PATCH 56/88] ARM: dts: r8a7779: Correct interrupt type for ARM TWD The ARM TWD interrupt is a private peripheral interrupt (PPI), and per the ARM GIC documentation, whether the type for PPIs can be set is IMPLEMENTATION DEFINED. For R-Car H1 devices the PPI type cannot be set, and so when we attempt to set the type for the ARM TWD interrupt it fails. This has gone unnoticed because it fails silently, and because we cannot re-configure the type it has had no impact. Nevertheless fix the type for the TWD interrupt so that it matches the hardware configuration. Based on patches by Jon Hunter for Tegra20/30 and OMAP4. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7779.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 60bc1e66bba92..5c1d48d712a18 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -67,7 +67,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xf0000600 0x20>; interrupts = ; + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; clocks = <&cpg_clocks R8A7779_CLK_ZS>; }; From 92cc7798edf105b0684a4a154fc7bac9955a4766 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 24 Mar 2016 11:01:07 +0900 Subject: [PATCH 57/88] ARM: dts: r8a7790: Use USB3.0 fallback compatibility string Use recently added fallback compatibility string in r8a7790 device tree. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7790.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 7cf52e6da9569..7486fcf985c4e 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1513,7 +1513,7 @@ }; xhci: usb@ee000000 { - compatible = "renesas,xhci-r8a7790"; + compatible = "renesas,xhci-r8a7790", "renesas,rcar-gen2-xhci"; reg = <0 0xee000000 0 0xc00>; interrupts = ; clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; From 26dba29689aef1135378ab8783157debe1314bce Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 24 Mar 2016 11:01:08 +0900 Subject: [PATCH 58/88] ARM: dts: r8a7791: Use USB3.0 fallback compatibility string Use recently added fallback compatibility string in r8a7791 device tree. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7791.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6122a7919c9fb..6d4a0b6e4df9d 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1520,7 +1520,7 @@ }; xhci: usb@ee000000 { - compatible = "renesas,xhci-r8a7791"; + compatible = "renesas,xhci-r8a7791", "renesas,rcar-gen2-xhci"; reg = <0 0xee000000 0 0xc00>; interrupts = ; clocks = <&mstp3_clks R8A7791_CLK_SSUSB>; From a5bd7f7a726c97698dacb062e4635da13e5ea8c4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Apr 2016 11:08:42 +0200 Subject: [PATCH 59/88] clk: renesas: Provide Kconfig symbols for CPG/MSSR and CPG/MSTP support Currently the decision whether to build the renesas-cpg-mssr and clk-mstp drivers is handled by Makefile logic. However, the rcar-sysc driver will need to know whether CPG/MSSR and/or CPG/MSTP support are available or not. To avoid having to duplicate this logic, move it to Kconfig. Provide non-visible CLK_RENESAS_CPG_MSSR and CLK_RENESAS_CPG_MSTP Kconfig symbols, which can be used by both Makefiles and C code. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart --- drivers/clk/Kconfig | 1 + drivers/clk/renesas/Kconfig | 16 ++++++++++++++++ drivers/clk/renesas/Makefile | 26 ++++++++++++++------------ 3 files changed, 31 insertions(+), 12 deletions(-) create mode 100644 drivers/clk/renesas/Kconfig diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 16f7d33421d8b..c45554957499e 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -201,6 +201,7 @@ source "drivers/clk/bcm/Kconfig" source "drivers/clk/hisilicon/Kconfig" source "drivers/clk/mvebu/Kconfig" source "drivers/clk/qcom/Kconfig" +source "drivers/clk/renesas/Kconfig" source "drivers/clk/samsung/Kconfig" source "drivers/clk/tegra/Kconfig" source "drivers/clk/ti/Kconfig" diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig new file mode 100644 index 0000000000000..2115ce410cfb4 --- /dev/null +++ b/drivers/clk/renesas/Kconfig @@ -0,0 +1,16 @@ +config CLK_RENESAS_CPG_MSSR + bool + default y if ARCH_R8A7795 + +config CLK_RENESAS_CPG_MSTP + bool + default y if ARCH_R7S72100 + default y if ARCH_R8A73A4 + default y if ARCH_R8A7740 + default y if ARCH_R8A7778 + default y if ARCH_R8A7779 + default y if ARCH_R8A7790 + default y if ARCH_R8A7791 + default y if ARCH_R8A7793 + default y if ARCH_R8A7794 + default y if ARCH_SH73A0 diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile index 7e2579b303267..ead8bb8435249 100644 --- a/drivers/clk/renesas/Makefile +++ b/drivers/clk/renesas/Makefile @@ -1,13 +1,15 @@ obj-$(CONFIG_ARCH_EMEV2) += clk-emev2.o -obj-$(CONFIG_ARCH_R7S72100) += clk-rz.o clk-mstp.o -obj-$(CONFIG_ARCH_R8A73A4) += clk-r8a73a4.o clk-mstp.o clk-div6.o -obj-$(CONFIG_ARCH_R8A7740) += clk-r8a7740.o clk-mstp.o clk-div6.o -obj-$(CONFIG_ARCH_R8A7778) += clk-r8a7778.o clk-mstp.o -obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o clk-mstp.o -obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o clk-mstp.o clk-div6.o -obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o clk-mstp.o clk-div6.o -obj-$(CONFIG_ARCH_R8A7793) += clk-rcar-gen2.o clk-mstp.o clk-div6.o -obj-$(CONFIG_ARCH_R8A7794) += clk-rcar-gen2.o clk-mstp.o clk-div6.o -obj-$(CONFIG_ARCH_R8A7795) += renesas-cpg-mssr.o \ - r8a7795-cpg-mssr.o clk-div6.o -obj-$(CONFIG_ARCH_SH73A0) += clk-sh73a0.o clk-mstp.o clk-div6.o +obj-$(CONFIG_ARCH_R7S72100) += clk-rz.o +obj-$(CONFIG_ARCH_R8A73A4) += clk-r8a73a4.o clk-div6.o +obj-$(CONFIG_ARCH_R8A7740) += clk-r8a7740.o clk-div6.o +obj-$(CONFIG_ARCH_R8A7778) += clk-r8a7778.o +obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o +obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o clk-div6.o +obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o clk-div6.o +obj-$(CONFIG_ARCH_R8A7793) += clk-rcar-gen2.o clk-div6.o +obj-$(CONFIG_ARCH_R8A7794) += clk-rcar-gen2.o clk-div6.o +obj-$(CONFIG_ARCH_R8A7795) += r8a7795-cpg-mssr.o +obj-$(CONFIG_ARCH_SH73A0) += clk-sh73a0.o clk-div6.o + +obj-$(CONFIG_CLK_RENESAS_CPG_MSSR) += renesas-cpg-mssr.o clk-div6.o +obj-$(CONFIG_CLK_RENESAS_CPG_MSTP) += clk-mstp.o From 12524e348bcb2189a8cf43829e90256f7e7d4f3d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Apr 2016 11:18:06 +0200 Subject: [PATCH 60/88] clk: renesas: mstp: Provide dummy attach/detach_dev callbacks Provide dummy cpg_mstp_{at,de}tach_dev() PM Domain callbacks if CPG/MSTP support is not included, so the rcar-sysc driver won't have to care about this. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart --- include/linux/clk/renesas.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/linux/clk/renesas.h b/include/linux/clk/renesas.h index 095b1681daf46..ab57a298a3740 100644 --- a/include/linux/clk/renesas.h +++ b/include/linux/clk/renesas.h @@ -25,7 +25,12 @@ void r8a7779_clocks_init(u32 mode); void rcar_gen2_clocks_init(u32 mode); void cpg_mstp_add_clk_domain(struct device_node *np); +#ifdef CONFIG_CLK_RENESAS_CPG_MSTP int cpg_mstp_attach_dev(struct generic_pm_domain *unused, struct device *dev); void cpg_mstp_detach_dev(struct generic_pm_domain *unused, struct device *dev); +#else +#define cpg_mstp_attach_dev NULL +#define cpg_mstp_detach_dev NULL +#endif #endif From 2066390ad47b374f3d35075a32325b47d15bf735 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 4 Mar 2016 17:03:46 +0100 Subject: [PATCH 61/88] clk: renesas: cpg-mssr: Export cpg_mssr_{at,de}tach_dev() The R-Car SYSC PM Domain driver has to power manage devices in power areas using clocks. To reuse code and to share knowledge of clocks suitable for power management, this is ideally done through the existing cpg_mssr_attach_dev() and cpg_mssr_detach_dev() callbacks. Hence these callbacks can no longer rely on their "domain" parameter pointing to the CPG/MSSR Clock Domain. To handle this, keep a pointer to the clock domain in a static variable. cpg_mssr_attach_dev() has to support probe deferral, as the R-Car SYSC PM Domain may be initialized, and devices may be added to it, before the CPG/MSSR Clock Domain is initialized. Dummy callbacks are provided for the case where CPG/MSTP support is not included, so the rcar-sysc driver won't have to care about this. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart --- drivers/clk/renesas/renesas-cpg-mssr.c | 18 ++++++++++++------ include/linux/clk/renesas.h | 7 +++++++ 2 files changed, 19 insertions(+), 6 deletions(-) diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c index 703bdb157528e..1f2dc3629f0e0 100644 --- a/drivers/clk/renesas/renesas-cpg-mssr.c +++ b/drivers/clk/renesas/renesas-cpg-mssr.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include @@ -388,6 +389,8 @@ struct cpg_mssr_clk_domain { unsigned int core_pm_clks[0]; }; +static struct cpg_mssr_clk_domain *cpg_mssr_clk_domain; + static bool cpg_mssr_is_pm_clk(const struct of_phandle_args *clkspec, struct cpg_mssr_clk_domain *pd) { @@ -411,17 +414,20 @@ static bool cpg_mssr_is_pm_clk(const struct of_phandle_args *clkspec, } } -static int cpg_mssr_attach_dev(struct generic_pm_domain *genpd, - struct device *dev) +int cpg_mssr_attach_dev(struct generic_pm_domain *unused, struct device *dev) { - struct cpg_mssr_clk_domain *pd = - container_of(genpd, struct cpg_mssr_clk_domain, genpd); + struct cpg_mssr_clk_domain *pd = cpg_mssr_clk_domain; struct device_node *np = dev->of_node; struct of_phandle_args clkspec; struct clk *clk; int i = 0; int error; + if (!pd) { + dev_dbg(dev, "CPG/MSSR clock domain not yet available\n"); + return -EPROBE_DEFER; + } + while (!of_parse_phandle_with_args(np, "clocks", "#clock-cells", i, &clkspec)) { if (cpg_mssr_is_pm_clk(&clkspec, pd)) @@ -461,8 +467,7 @@ static int cpg_mssr_attach_dev(struct generic_pm_domain *genpd, return error; } -static void cpg_mssr_detach_dev(struct generic_pm_domain *genpd, - struct device *dev) +void cpg_mssr_detach_dev(struct generic_pm_domain *unused, struct device *dev) { if (!list_empty(&dev->power.subsys_data->clock_list)) pm_clk_destroy(dev); @@ -491,6 +496,7 @@ static int __init cpg_mssr_add_clk_domain(struct device *dev, pm_genpd_init(genpd, &simple_qos_governor, false); genpd->attach_dev = cpg_mssr_attach_dev; genpd->detach_dev = cpg_mssr_detach_dev; + cpg_mssr_clk_domain = pd; of_genpd_add_provider_simple(np, genpd); return 0; diff --git a/include/linux/clk/renesas.h b/include/linux/clk/renesas.h index ab57a298a3740..ba6fa4148515e 100644 --- a/include/linux/clk/renesas.h +++ b/include/linux/clk/renesas.h @@ -33,4 +33,11 @@ void cpg_mstp_detach_dev(struct generic_pm_domain *unused, struct device *dev); #define cpg_mstp_detach_dev NULL #endif +#ifdef CONFIG_CLK_RENESAS_CPG_MSSR +int cpg_mssr_attach_dev(struct generic_pm_domain *unused, struct device *dev); +void cpg_mssr_detach_dev(struct generic_pm_domain *unused, struct device *dev); +#else +#define cpg_mssr_attach_dev NULL +#define cpg_mssr_detach_dev NULL +#endif #endif From 22f708b057dbe3ab4aa53c76b5f3051743784777 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 1 Apr 2016 17:44:38 +0200 Subject: [PATCH 62/88] ARM: dts: r8a7790: Set maximum frequencies for SDHI clocks Taken from the datasheet. Signed-off-by: Ben Hutchings Signed-off-by: Wolfram Sang Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 7486fcf985c4e..b920facb0c3b1 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -589,6 +589,7 @@ clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; dmas = <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx"; + max-frequency = <156000000>; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -600,6 +601,7 @@ clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; dmas = <&dmac1 0xc9>, <&dmac1 0xca>; dma-names = "tx", "rx"; + max-frequency = <156000000>; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -611,6 +613,7 @@ clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx"; + max-frequency = <97500000>; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -622,6 +625,7 @@ clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx"; + max-frequency = <97500000>; power-domains = <&cpg_clocks>; status = "disabled"; }; From be32bcbbd18213803ff24e480340d4d2cca1df4f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 Apr 2016 14:02:36 +0200 Subject: [PATCH 63/88] soc: renesas: Move pm-rcar to drivers/soc/renesas/rcar-sysc Move the pm-rcar driver from arch/arm/mach-shmobile/ to drivers/soc/renesas/, and its header file to include/linux/soc/renesas/, so it can be shared between arm32 (R-Car H1 and Gen2) and arm64 (R-Car Gen3). Rename it to rcar-sysc as it's really a driver for the R-Car System Controller (SYSC). Kill the intermediate PM_RCAR config symbol, as it's not user configurable anymore, and to prepare for SoC-specific make rules. Add the missing #include to rcar-sysc.h, which was exposed by different include order. Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- MAINTAINERS | 4 ++++ arch/arm/mach-shmobile/Kconfig | 11 ++++------- arch/arm/mach-shmobile/Makefile | 1 - arch/arm/mach-shmobile/pm-r8a7779.c | 3 ++- arch/arm/mach-shmobile/pm-rcar-gen2.c | 2 +- arch/arm/mach-shmobile/smp-r8a7779.c | 2 +- arch/arm/mach-shmobile/smp-r8a7790.c | 2 +- drivers/soc/Makefile | 3 ++- drivers/soc/renesas/Makefile | 5 +++++ .../pm-rcar.c => drivers/soc/renesas/rcar-sysc.c | 2 +- .../linux/soc/renesas/rcar-sysc.h | 8 +++++--- 11 files changed, 26 insertions(+), 17 deletions(-) create mode 100644 drivers/soc/renesas/Makefile rename arch/arm/mach-shmobile/pm-rcar.c => drivers/soc/renesas/rcar-sysc.c (99%) rename arch/arm/mach-shmobile/pm-rcar.h => include/linux/soc/renesas/rcar-sysc.h (66%) diff --git a/MAINTAINERS b/MAINTAINERS index 03e00c7c88ebc..a0e23922a90b1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1491,6 +1491,8 @@ Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next S: Supported F: arch/arm64/boot/dts/renesas/ +F: drivers/soc/renesas/ +F: include/linux/soc/renesas/ ARM/RISCPC ARCHITECTURE M: Russell King @@ -1604,6 +1606,8 @@ F: arch/arm/configs/shmobile_defconfig F: arch/arm/include/debug/renesas-scif.S F: arch/arm/mach-shmobile/ F: drivers/sh/ +F: drivers/soc/renesas/ +F: include/linux/soc/renesas/ ARM/SOCFPGA ARCHITECTURE M: Dinh Nguyen diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index f2bc5c353119e..fe4ccb52f9213 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -4,11 +4,6 @@ config ARCH_SHMOBILE config ARCH_SHMOBILE_MULTI bool -config PM_RCAR - bool - select PM - select PM_GENERIC_DOMAINS - config PM_RMOBILE bool select PM @@ -16,13 +11,15 @@ config PM_RMOBILE config ARCH_RCAR_GEN1 bool - select PM_RCAR + select PM + select PM_GENERIC_DOMAINS select RENESAS_INTC_IRQPIN select SYS_SUPPORTS_SH_TMU config ARCH_RCAR_GEN2 bool - select PM_RCAR + select PM + select PM_GENERIC_DOMAINS select RENESAS_IRQC select SYS_SUPPORTS_SH_CMT select PCI_DOMAINS if PCI diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index a65c80ac9009d..ebb909c55b856 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -39,7 +39,6 @@ smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o # PM objects obj-$(CONFIG_SUSPEND) += suspend.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o -obj-$(CONFIG_PM_RCAR) += pm-rcar.o obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c index 14c42a1bdf1ef..4174cbcbc467d 100644 --- a/arch/arm/mach-shmobile/pm-r8a7779.c +++ b/arch/arm/mach-shmobile/pm-r8a7779.c @@ -9,9 +9,10 @@ * for more details. */ +#include + #include -#include "pm-rcar.h" #include "r8a7779.h" /* SYSC */ diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c index 6815781ad1165..691ac166a277c 100644 --- a/arch/arm/mach-shmobile/pm-rcar-gen2.c +++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c @@ -13,9 +13,9 @@ #include #include #include +#include #include #include "common.h" -#include "pm-rcar.h" #include "rcar-gen2.h" /* RST */ diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index f5c31fbc10b2e..c6951ee245889 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -19,13 +19,13 @@ #include #include #include +#include #include #include #include #include "common.h" -#include "pm-rcar.h" #include "r8a7779.h" #define AVECR IOMEM(0xfe700040) diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c index f6426c6fdefcb..28f26d5362d8d 100644 --- a/arch/arm/mach-shmobile/smp-r8a7790.c +++ b/arch/arm/mach-shmobile/smp-r8a7790.c @@ -17,12 +17,12 @@ #include #include #include +#include #include #include "common.h" #include "platsmp-apmu.h" -#include "pm-rcar.h" #include "rcar-gen2.h" #include "r8a7790.h" diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index 5ade71306ee10..380230f03874d 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -9,7 +9,8 @@ obj-$(CONFIG_MACH_DOVE) += dove/ obj-y += fsl/ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ obj-$(CONFIG_ARCH_QCOM) += qcom/ -obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ +obj-$(CONFIG_ARCH_RENESAS) += renesas/ +obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_SOC_SAMSUNG) += samsung/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_ARCH_TEGRA) += tegra/ diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile new file mode 100644 index 0000000000000..2b64f6c946813 --- /dev/null +++ b/drivers/soc/renesas/Makefile @@ -0,0 +1,5 @@ +obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o +obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o +obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o +obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o +obj-$(CONFIG_ARCH_R8A7794) += rcar-sysc.o diff --git a/arch/arm/mach-shmobile/pm-rcar.c b/drivers/soc/renesas/rcar-sysc.c similarity index 99% rename from arch/arm/mach-shmobile/pm-rcar.c rename to drivers/soc/renesas/rcar-sysc.c index 0af05d288b09c..d59bcdf78f0b5 100644 --- a/arch/arm/mach-shmobile/pm-rcar.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -13,7 +13,7 @@ #include #include #include -#include "pm-rcar.h" +#include /* SYSC Common */ #define SYSCSR 0x00 /* SYSC Status Register */ diff --git a/arch/arm/mach-shmobile/pm-rcar.h b/include/linux/soc/renesas/rcar-sysc.h similarity index 66% rename from arch/arm/mach-shmobile/pm-rcar.h rename to include/linux/soc/renesas/rcar-sysc.h index 1b901db4a24c4..96f30c2883881 100644 --- a/arch/arm/mach-shmobile/pm-rcar.h +++ b/include/linux/soc/renesas/rcar-sysc.h @@ -1,5 +1,7 @@ -#ifndef PM_RCAR_H -#define PM_RCAR_H +#ifndef __LINUX_SOC_RENESAS_RCAR_SYSC_H__ +#define __LINUX_SOC_RENESAS_RCAR_SYSC_H__ + +#include struct rcar_sysc_ch { u16 chan_offs; @@ -12,4 +14,4 @@ int rcar_sysc_power_up(const struct rcar_sysc_ch *sysc_ch); bool rcar_sysc_power_is_off(const struct rcar_sysc_ch *sysc_ch); void __iomem *rcar_sysc_init(phys_addr_t base); -#endif /* PM_RCAR_H */ +#endif /* __LINUX_SOC_RENESAS_RCAR_SYSC_H__ */ From 68667cebfc0d27d2153d7a6b489f3231b533d9bc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 Apr 2016 14:02:37 +0200 Subject: [PATCH 64/88] soc: renesas: rcar-sysc: Improve rcar_sysc_power() debug info Print requested power domain state. Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- drivers/soc/renesas/rcar-sysc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index d59bcdf78f0b5..9ba5fd15c53bf 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -128,7 +128,7 @@ static int rcar_sysc_power(const struct rcar_sysc_ch *sysc_ch, bool on) out: spin_unlock_irqrestore(&rcar_sysc_lock, flags); - pr_debug("sysc power domain %d: %08x -> %d\n", + pr_debug("sysc power %s domain %d: %08x -> %d\n", on ? "on" : "off", sysc_ch->isr_bit, ioread32(rcar_sysc_base + SYSCISR), ret); return ret; } From dcc09fd143bb97c2e83e443f7343c07aa0a9a6c0 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 Apr 2016 14:02:38 +0200 Subject: [PATCH 65/88] soc: renesas: rcar-sysc: Add DT support for SYSC PM domains Populate the SYSC PM domains from DT, based on the presence of a device node for the System Controller. The actual power area hiearchy, and features of specific areas are obtained from tables in the C code. The SYSCIER and SYSCIMR register values are derived from the power areas present, which will help to get rid of the hardcoded values in R-Car H1 and R-Car Gen2 platform code later. Initialization is done from an early_initcall(), to make sure the PM Domains are initialized before secondary CPU bringup. Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Reviewed-by: Ulf Hansson Signed-off-by: Simon Horman --- drivers/soc/renesas/rcar-sysc.c | 202 +++++++++++++++++++++++++++++++- drivers/soc/renesas/rcar-sysc.h | 53 +++++++++ 2 files changed, 254 insertions(+), 1 deletion(-) create mode 100644 drivers/soc/renesas/rcar-sysc.h diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 9ba5fd15c53bf..95f2b59cbd76f 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -2,6 +2,7 @@ * R-Car SYSC Power management support * * Copyright (C) 2014 Magnus Damm + * Copyright (C) 2015-2016 Glider bvba * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -11,10 +12,15 @@ #include #include #include +#include +#include +#include #include #include #include +#include "rcar-sysc.h" + /* SYSC Common */ #define SYSCSR 0x00 /* SYSC Status Register */ #define SYSCISR 0x04 /* Interrupt Status Register */ @@ -29,7 +35,8 @@ /* * Power Control Register Offsets inside the register block for each domain * Note: The "CR" registers for ARM cores exist on H1 only - * Use WFI to power off, CPG/APMU to resume ARM cores on R-Car Gen2 + * Use WFI to power off, CPG/APMU to resume ARM cores on R-Car Gen2 + * Use PSCI on R-Car Gen3 */ #define PWRSR_OFFS 0x00 /* Power Status Register */ #define PWROFFCR_OFFS 0x04 /* Power Shutoff Control Register */ @@ -48,6 +55,8 @@ #define SYSCISR_RETRIES 1000 #define SYSCISR_DELAY_US 1 +#define RCAR_PD_ALWAYS_ON 32 /* Always-on power area */ + static void __iomem *rcar_sysc_base; static DEFINE_SPINLOCK(rcar_sysc_lock); /* SMP CPUs + I/O devices */ @@ -162,3 +171,194 @@ void __iomem *rcar_sysc_init(phys_addr_t base) return rcar_sysc_base; } + +struct rcar_sysc_pd { + struct generic_pm_domain genpd; + struct rcar_sysc_ch ch; + unsigned int flags; + char name[0]; +}; + +static inline struct rcar_sysc_pd *to_rcar_pd(struct generic_pm_domain *d) +{ + return container_of(d, struct rcar_sysc_pd, genpd); +} + +static int rcar_sysc_pd_power_off(struct generic_pm_domain *genpd) +{ + struct rcar_sysc_pd *pd = to_rcar_pd(genpd); + + pr_debug("%s: %s\n", __func__, genpd->name); + + if (pd->flags & PD_NO_CR) { + pr_debug("%s: Cannot control %s\n", __func__, genpd->name); + return -EBUSY; + } + + if (pd->flags & PD_BUSY) { + pr_debug("%s: %s busy\n", __func__, genpd->name); + return -EBUSY; + } + + return rcar_sysc_power_down(&pd->ch); +} + +static int rcar_sysc_pd_power_on(struct generic_pm_domain *genpd) +{ + struct rcar_sysc_pd *pd = to_rcar_pd(genpd); + + pr_debug("%s: %s\n", __func__, genpd->name); + + if (pd->flags & PD_NO_CR) { + pr_debug("%s: Cannot control %s\n", __func__, genpd->name); + return 0; + } + + return rcar_sysc_power_up(&pd->ch); +} + +static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) +{ + struct generic_pm_domain *genpd = &pd->genpd; + const char *name = pd->genpd.name; + struct dev_power_governor *gov = &simple_qos_governor; + + if (pd->flags & PD_CPU) { + /* + * This domain contains a CPU core and therefore it should + * only be turned off if the CPU is not in use. + */ + pr_debug("PM domain %s contains %s\n", name, "CPU"); + pd->flags |= PD_BUSY; + gov = &pm_domain_always_on_gov; + } else if (pd->flags & PD_SCU) { + /* + * This domain contains an SCU and cache-controller, and + * therefore it should only be turned off if the CPU cores are + * not in use. + */ + pr_debug("PM domain %s contains %s\n", name, "SCU"); + pd->flags |= PD_BUSY; + gov = &pm_domain_always_on_gov; + } else if (pd->flags & PD_NO_CR) { + /* + * This domain cannot be turned off. + */ + pd->flags |= PD_BUSY; + gov = &pm_domain_always_on_gov; + } + + genpd->power_off = rcar_sysc_pd_power_off; + genpd->power_on = rcar_sysc_pd_power_on; + + if (pd->flags & (PD_CPU | PD_NO_CR)) { + /* Skip CPUs (handled by SMP code) and areas without control */ + pr_debug("%s: Not touching %s\n", __func__, genpd->name); + goto finalize; + } + + if (!rcar_sysc_power_is_off(&pd->ch)) { + pr_debug("%s: %s is already powered\n", __func__, genpd->name); + goto finalize; + } + + rcar_sysc_power_up(&pd->ch); + +finalize: + pm_genpd_init(genpd, gov, false); +} + +static const struct of_device_id rcar_sysc_matches[] = { + { /* sentinel */ } +}; + +struct rcar_pm_domains { + struct genpd_onecell_data onecell_data; + struct generic_pm_domain *domains[RCAR_PD_ALWAYS_ON + 1]; +}; + +static int __init rcar_sysc_pd_init(void) +{ + const struct rcar_sysc_info *info; + const struct of_device_id *match; + struct rcar_pm_domains *domains; + struct device_node *np; + u32 syscier, syscimr; + void __iomem *base; + unsigned int i; + int error; + + np = of_find_matching_node_and_match(NULL, rcar_sysc_matches, &match); + if (!np) + return -ENODEV; + + info = match->data; + + base = of_iomap(np, 0); + if (!base) { + pr_warn("%s: Cannot map regs\n", np->full_name); + error = -ENOMEM; + goto out_put; + } + + rcar_sysc_base = base; + + domains = kzalloc(sizeof(*domains), GFP_KERNEL); + if (!domains) { + error = -ENOMEM; + goto out_put; + } + + domains->onecell_data.domains = domains->domains; + domains->onecell_data.num_domains = ARRAY_SIZE(domains->domains); + + for (i = 0, syscier = 0; i < info->num_areas; i++) + syscier |= BIT(info->areas[i].isr_bit); + + /* + * Mask all interrupt sources to prevent the CPU from receiving them. + * Make sure not to clear reserved bits that were set before. + */ + syscimr = ioread32(base + SYSCIMR); + syscimr |= syscier; + pr_debug("%s: syscimr = 0x%08x\n", np->full_name, syscimr); + iowrite32(syscimr, base + SYSCIMR); + + /* + * SYSC needs all interrupt sources enabled to control power. + */ + pr_debug("%s: syscier = 0x%08x\n", np->full_name, syscier); + iowrite32(syscier, base + SYSCIER); + + for (i = 0; i < info->num_areas; i++) { + const struct rcar_sysc_area *area = &info->areas[i]; + struct rcar_sysc_pd *pd; + + pd = kzalloc(sizeof(*pd) + strlen(area->name) + 1, GFP_KERNEL); + if (!pd) { + error = -ENOMEM; + goto out_put; + } + + strcpy(pd->name, area->name); + pd->genpd.name = pd->name; + pd->ch.chan_offs = area->chan_offs; + pd->ch.chan_bit = area->chan_bit; + pd->ch.isr_bit = area->isr_bit; + pd->flags = area->flags; + + rcar_sysc_pd_setup(pd); + if (area->parent >= 0) + pm_genpd_add_subdomain(domains->domains[area->parent], + &pd->genpd); + + domains->domains[area->isr_bit] = &pd->genpd; + } + + of_genpd_add_provider_onecell(np, &domains->onecell_data); + +out_put: + of_node_put(np); + return error; +} +early_initcall(rcar_sysc_pd_init); diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h new file mode 100644 index 0000000000000..7bb48b4f7334f --- /dev/null +++ b/drivers/soc/renesas/rcar-sysc.h @@ -0,0 +1,53 @@ +/* + * Renesas R-Car System Controller + * + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ +#ifndef __SOC_RENESAS_RCAR_SYSC_H__ +#define __SOC_RENESAS_RCAR_SYSC_H__ + +#include + + +/* + * Power Domain flags + */ +#define PD_CPU BIT(0) /* Area contains main CPU core */ +#define PD_SCU BIT(1) /* Area contains SCU and L2 cache */ +#define PD_NO_CR BIT(2) /* Area lacks PWR{ON,OFF}CR registers */ + +#define PD_BUSY BIT(3) /* Busy, for internal use only */ + +#define PD_CPU_CR PD_CPU /* CPU area has CR (R-Car H1) */ +#define PD_CPU_NOCR PD_CPU | PD_NO_CR /* CPU area lacks CR (R-Car Gen2/3) */ +#define PD_ALWAYS_ON PD_NO_CR /* Always-on area */ + + +/* + * Description of a Power Area + */ + +struct rcar_sysc_area { + const char *name; + u16 chan_offs; /* Offset of PWRSR register for this area */ + u8 chan_bit; /* Bit in PWR* (except for PWRUP in PWRSR) */ + u8 isr_bit; /* Bit in SYSCI*R */ + int parent; /* -1 if none */ + unsigned int flags; /* See PD_* */ +}; + + +/* + * SoC-specific Power Area Description + */ + +struct rcar_sysc_info { + const struct rcar_sysc_area *areas; + unsigned int num_areas; +}; + +#endif /* __SOC_RENESAS_RCAR_SYSC_H__ */ From 2f024cef5b064d5498fe466dfe9492d46b5b12a4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 Apr 2016 14:02:39 +0200 Subject: [PATCH 66/88] soc: renesas: rcar-sysc: Make rcar_sysc_power_is_off() static As of commit b12ff41658171f53 ("ARM: shmobile: r8a7779: Remove legacy PM Domain remainings"), rcar_sysc_power_is_off() is no longer used from SoC-specific code. Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- drivers/soc/renesas/rcar-sysc.c | 2 +- include/linux/soc/renesas/rcar-sysc.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 95f2b59cbd76f..4e760d63f2abd 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -152,7 +152,7 @@ int rcar_sysc_power_up(const struct rcar_sysc_ch *sysc_ch) return rcar_sysc_power(sysc_ch, true); } -bool rcar_sysc_power_is_off(const struct rcar_sysc_ch *sysc_ch) +static bool rcar_sysc_power_is_off(const struct rcar_sysc_ch *sysc_ch) { unsigned int st; diff --git a/include/linux/soc/renesas/rcar-sysc.h b/include/linux/soc/renesas/rcar-sysc.h index 96f30c2883881..92fc613ab23db 100644 --- a/include/linux/soc/renesas/rcar-sysc.h +++ b/include/linux/soc/renesas/rcar-sysc.h @@ -11,7 +11,6 @@ struct rcar_sysc_ch { int rcar_sysc_power_down(const struct rcar_sysc_ch *sysc_ch); int rcar_sysc_power_up(const struct rcar_sysc_ch *sysc_ch); -bool rcar_sysc_power_is_off(const struct rcar_sysc_ch *sysc_ch); void __iomem *rcar_sysc_init(phys_addr_t base); #endif /* __LINUX_SOC_RENESAS_RCAR_SYSC_H__ */ From 1ca79699cb958c17b0b08d9f9bd683e5011e7927 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 1 Apr 2016 17:44:39 +0200 Subject: [PATCH 67/88] ARM: dts: r8a7790: lager: Enable UHS-I SDR-50 Add the "1v8" pinctrl state and sd-uhs-sdr50 property to SDHI{0,2}. Signed-off-by: Ben Hutchings Signed-off-by: Wolfram Sang Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 823a119cb1b4a..749ba02b6a53a 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -345,11 +345,25 @@ sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; }; sdhi2_pins: sd2 { groups = "sdhi2_data4", "sdhi2_ctrl"; function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; }; mmc1_pins: mmc1 { @@ -538,21 +552,25 @@ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; status = "okay"; }; &sdhi2 { pinctrl-0 = <&sdhi2_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi2>; vqmmc-supply = <&vccq_sdhi2>; cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; status = "okay"; }; From 7e2a1bcd2185c9d7d4c9b2910249a1a8fa841341 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 14 Apr 2016 11:58:42 +0200 Subject: [PATCH 68/88] ARM: dts: kzm9g: Configure NMI key as wake-up source Add a GPIO key with wake-up capability for the NMI button. This allows to wake up the system from s2ram without relying on the buttons on the optional switch board. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/sh73a0-kzm9g.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index e40a2f23b6cd4..c2d8a080e3926 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -149,6 +149,13 @@ label = "SW1"; wakeup-source; }; + + wakeup-key { + gpios = <&pfc 159 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "NMI"; + wakeup-source; + }; }; sound { From 21c7d0fcbe10a1a81fb791a9bdcca2381bc16c15 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 18 Apr 2016 11:41:30 +0200 Subject: [PATCH 69/88] ARM: dts: r8a7790: fix max-frequency for SDHI The wrong values come from an old datasheet (H2 v0.6). Anything later has the fixed value of 195MHz (H2 v0.7 up to Gen2-common V2.0). Signed-off-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index b920facb0c3b1..776a2aed81d2e 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -589,7 +589,7 @@ clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; dmas = <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx"; - max-frequency = <156000000>; + max-frequency = <195000000>; power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -601,7 +601,7 @@ clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; dmas = <&dmac1 0xc9>, <&dmac1 0xca>; dma-names = "tx", "rx"; - max-frequency = <156000000>; + max-frequency = <195000000>; power-domains = <&cpg_clocks>; status = "disabled"; }; From fc9ee228f5005437b9fdb1b85804b6d3f8d497be Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Mon, 18 Apr 2016 18:02:56 +0200 Subject: [PATCH 70/88] ARM: dts: r8a7793: Add SDHI controllers Same as on r8a7791. Signed-off-by: Ulrich Hecht Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7793.dtsi | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index bddc31283bd93..6186179fd66db 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -507,6 +507,39 @@ reg = <0 0xe6060000 0 0x250>; }; + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7793"; + reg = <0 0xee100000 0 0x328>; + interrupts = ; + clocks = <&mstp3_clks R8A7793_CLK_SDHI0>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7793"; + reg = <0 0xee140000 0 0x100>; + interrupts = ; + clocks = <&mstp3_clks R8A7793_CLK_SDHI1>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7793"; + reg = <0 0xee160000 0 0x100>; + interrupts = ; + clocks = <&mstp3_clks R8A7793_CLK_SDHI2>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7793", "renesas,rcar-gen2-scifa", "renesas,scifa"; From 6f92cb2f454c26d9bdada902e22af4bc361a5202 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Mon, 18 Apr 2016 18:02:57 +0200 Subject: [PATCH 71/88] ARM: dts: gose: Enable SDHI controllers Includes regulator and pin assignments. Signed-off-by: Ulrich Hecht Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7793-gose.dts | 119 +++++++++++++++++++++++++++++ 1 file changed, 119 insertions(+) diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 3cd1c804621fa..0ebc3ee34923f 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -158,6 +158,78 @@ }; }; + vcc_sdhi0: regulator@0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator@1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi1: regulator@2 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi1: regulator@3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi2: regulator@4 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi2: regulator@5 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI2 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + audio_clock: audio_clock { compatible = "fixed-clock"; #clock-cells = <0>; @@ -273,6 +345,21 @@ function = "intc"; }; + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; + renesas,function = "sdhi0"; + }; + + sdhi1_pins: sd1 { + renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; + renesas,function = "sdhi1"; + }; + + sdhi2_pins: sd2 { + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; + renesas,function = "sdhi2"; + }; + qspi_pins: spi0 { groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; @@ -328,6 +415,38 @@ status = "okay"; }; +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi1>; + vqmmc-supply = <&vccq_sdhi1>; + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi2>; + vqmmc-supply = <&vccq_sdhi2>; + cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; From 1c8c77f52d1037c61468539e1d68c44f9e710536 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 Apr 2016 14:02:40 +0200 Subject: [PATCH 72/88] soc: renesas: rcar-sysc: Enable Clock Domain for I/O devices On R-Car H3, some power areas (e.g. A3VP) contain I/O devices, which are also part of the CPG/MSSR Clock Domain. On all R-Car SoCs, devices in the "always-on" PM Domain are part of the Clock Domain served by the CPG/MSSR or CPG/MSTP driver. Hook up the CPG/MSTP or CPG/MSSR Clock Domain attach/detach callbacks to enable power management using module clocks. Which callback to hook up depends on the presence of device nodes compatible with "renesas,cpg-mstp-clocks". This clears the path for a future migration from the CPG/MSTP to the CPG/MSSR driver on R-Car H1 and Gen2. Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Reviewed-by: Ulf Hansson Signed-off-by: Simon Horman --- drivers/soc/renesas/rcar-sysc.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 4e760d63f2abd..0d49a25de740f 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -9,6 +9,7 @@ * for more details. */ +#include #include #include #include @@ -217,6 +218,8 @@ static int rcar_sysc_pd_power_on(struct generic_pm_domain *genpd) return rcar_sysc_power_up(&pd->ch); } +static bool has_cpg_mstp; + static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) { struct generic_pm_domain *genpd = &pd->genpd; @@ -248,6 +251,18 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) gov = &pm_domain_always_on_gov; } + if (!(pd->flags & (PD_CPU | PD_SCU))) { + /* Enable Clock Domain for I/O devices */ + genpd->flags = GENPD_FLAG_PM_CLK; + if (has_cpg_mstp) { + genpd->attach_dev = cpg_mstp_attach_dev; + genpd->detach_dev = cpg_mstp_detach_dev; + } else { + genpd->attach_dev = cpg_mssr_attach_dev; + genpd->detach_dev = cpg_mssr_detach_dev; + } + } + genpd->power_off = rcar_sysc_pd_power_off; genpd->power_on = rcar_sysc_pd_power_on; @@ -294,6 +309,9 @@ static int __init rcar_sysc_pd_init(void) info = match->data; + has_cpg_mstp = of_find_compatible_node(NULL, NULL, + "renesas,cpg-mstp-clocks"); + base = of_iomap(np, 0); if (!base) { pr_warn("%s: Cannot map regs\n", np->full_name); From 9b83ea17b0d9b5461ee46a2f5a668e6b10743f1a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 Apr 2016 14:02:41 +0200 Subject: [PATCH 73/88] soc: renesas: rcar-sysc: Add support for R-Car H1 power areas Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- drivers/soc/renesas/Makefile | 2 +- drivers/soc/renesas/r8a7779-sysc.c | 34 ++++++++++++++++++++++++++++++ drivers/soc/renesas/rcar-sysc.c | 3 +++ drivers/soc/renesas/rcar-sysc.h | 1 + 4 files changed, 39 insertions(+), 1 deletion(-) create mode 100644 drivers/soc/renesas/r8a7779-sysc.c diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile index 2b64f6c946813..b8aa9db4fdd95 100644 --- a/drivers/soc/renesas/Makefile +++ b/drivers/soc/renesas/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o +obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o r8a7779-sysc.o obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o diff --git a/drivers/soc/renesas/r8a7779-sysc.c b/drivers/soc/renesas/r8a7779-sysc.c new file mode 100644 index 0000000000000..9e8e6b7faa044 --- /dev/null +++ b/drivers/soc/renesas/r8a7779-sysc.c @@ -0,0 +1,34 @@ +/* + * Renesas R-Car H1 System Controller + * + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include +#include + +#include + +#include "rcar-sysc.h" + +static const struct rcar_sysc_area r8a7779_areas[] __initconst = { + { "always-on", 0, 0, R8A7779_PD_ALWAYS_ON, -1, PD_ALWAYS_ON }, + { "arm1", 0x40, 1, R8A7779_PD_ARM1, R8A7779_PD_ALWAYS_ON, + PD_CPU_CR }, + { "arm2", 0x40, 2, R8A7779_PD_ARM2, R8A7779_PD_ALWAYS_ON, + PD_CPU_CR }, + { "arm3", 0x40, 3, R8A7779_PD_ARM3, R8A7779_PD_ALWAYS_ON, + PD_CPU_CR }, + { "sgx", 0xc0, 0, R8A7779_PD_SGX, R8A7779_PD_ALWAYS_ON }, + { "vdp", 0x100, 0, R8A7779_PD_VDP, R8A7779_PD_ALWAYS_ON }, + { "imp", 0x140, 0, R8A7779_PD_IMP, R8A7779_PD_ALWAYS_ON }, +}; + +const struct rcar_sysc_info r8a7779_sysc_info __initconst = { + .areas = r8a7779_areas, + .num_areas = ARRAY_SIZE(r8a7779_areas), +}; diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 0d49a25de740f..858ad23ae03aa 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -284,6 +284,9 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) } static const struct of_device_id rcar_sysc_matches[] = { +#ifdef CONFIG_ARCH_R8A7779 + { .compatible = "renesas,r8a7779-sysc", .data = &r8a7779_sysc_info }, +#endif { /* sentinel */ } }; diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h index 7bb48b4f7334f..7cf58b9cd544f 100644 --- a/drivers/soc/renesas/rcar-sysc.h +++ b/drivers/soc/renesas/rcar-sysc.h @@ -50,4 +50,5 @@ struct rcar_sysc_info { unsigned int num_areas; }; +extern const struct rcar_sysc_info r8a7779_sysc_info; #endif /* __SOC_RENESAS_RCAR_SYSC_H__ */ From ad7c9dbc25d19c2fbf4414a8cb4f02f7933611d6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 Apr 2016 14:02:42 +0200 Subject: [PATCH 74/88] soc: renesas: rcar-sysc: Add support for R-Car H2 power areas Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- drivers/soc/renesas/Makefile | 2 +- drivers/soc/renesas/r8a7790-sysc.c | 48 ++++++++++++++++++++++++++++++ drivers/soc/renesas/rcar-sysc.c | 3 ++ drivers/soc/renesas/rcar-sysc.h | 1 + 4 files changed, 53 insertions(+), 1 deletion(-) create mode 100644 drivers/soc/renesas/r8a7790-sysc.c diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile index b8aa9db4fdd95..6588be3c6776f 100644 --- a/drivers/soc/renesas/Makefile +++ b/drivers/soc/renesas/Makefile @@ -1,5 +1,5 @@ obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o r8a7779-sysc.o -obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o +obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o r8a7790-sysc.o obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o obj-$(CONFIG_ARCH_R8A7794) += rcar-sysc.o diff --git a/drivers/soc/renesas/r8a7790-sysc.c b/drivers/soc/renesas/r8a7790-sysc.c new file mode 100644 index 0000000000000..7a567ad0ff73c --- /dev/null +++ b/drivers/soc/renesas/r8a7790-sysc.c @@ -0,0 +1,48 @@ +/* + * Renesas R-Car H2 System Controller + * + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include +#include + +#include + +#include "rcar-sysc.h" + +static const struct rcar_sysc_area r8a7790_areas[] __initconst = { + { "always-on", 0, 0, R8A7790_PD_ALWAYS_ON, -1, PD_ALWAYS_ON }, + { "ca15-scu", 0x180, 0, R8A7790_PD_CA15_SCU, R8A7790_PD_ALWAYS_ON, + PD_SCU }, + { "ca15-cpu0", 0x40, 0, R8A7790_PD_CA15_CPU0, R8A7790_PD_CA15_SCU, + PD_CPU_NOCR }, + { "ca15-cpu1", 0x40, 1, R8A7790_PD_CA15_CPU1, R8A7790_PD_CA15_SCU, + PD_CPU_NOCR }, + { "ca15-cpu2", 0x40, 2, R8A7790_PD_CA15_CPU2, R8A7790_PD_CA15_SCU, + PD_CPU_NOCR }, + { "ca15-cpu3", 0x40, 3, R8A7790_PD_CA15_CPU3, R8A7790_PD_CA15_SCU, + PD_CPU_NOCR }, + { "ca7-scu", 0x100, 0, R8A7790_PD_CA7_SCU, R8A7790_PD_ALWAYS_ON, + PD_SCU }, + { "ca7-cpu0", 0x1c0, 0, R8A7790_PD_CA7_CPU0, R8A7790_PD_CA7_SCU, + PD_CPU_NOCR }, + { "ca7-cpu1", 0x1c0, 1, R8A7790_PD_CA7_CPU1, R8A7790_PD_CA7_SCU, + PD_CPU_NOCR }, + { "ca7-cpu2", 0x1c0, 2, R8A7790_PD_CA7_CPU2, R8A7790_PD_CA7_SCU, + PD_CPU_NOCR }, + { "ca7-cpu3", 0x1c0, 3, R8A7790_PD_CA7_CPU3, R8A7790_PD_CA7_SCU, + PD_CPU_NOCR }, + { "sh-4a", 0x80, 0, R8A7790_PD_SH_4A, R8A7790_PD_ALWAYS_ON }, + { "rgx", 0xc0, 0, R8A7790_PD_RGX, R8A7790_PD_ALWAYS_ON }, + { "imp", 0x140, 0, R8A7790_PD_IMP, R8A7790_PD_ALWAYS_ON }, +}; + +const struct rcar_sysc_info r8a7790_sysc_info __initconst = { + .areas = r8a7790_areas, + .num_areas = ARRAY_SIZE(r8a7790_areas), +}; diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 858ad23ae03aa..07ea25925e85c 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -286,6 +286,9 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd) static const struct of_device_id rcar_sysc_matches[] = { #ifdef CONFIG_ARCH_R8A7779 { .compatible = "renesas,r8a7779-sysc", .data = &r8a7779_sysc_info }, +#endif +#ifdef CONFIG_ARCH_R8A7790 + { .compatible = "renesas,r8a7790-sysc", .data = &r8a7790_sysc_info }, #endif { /* sentinel */ } }; diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h index 7cf58b9cd544f..33c8f2d00a01e 100644 --- a/drivers/soc/renesas/rcar-sysc.h +++ b/drivers/soc/renesas/rcar-sysc.h @@ -51,4 +51,5 @@ struct rcar_sysc_info { }; extern const struct rcar_sysc_info r8a7779_sysc_info; +extern const struct rcar_sysc_info r8a7790_sysc_info; #endif /* __SOC_RENESAS_RCAR_SYSC_H__ */ From c5fbb3c08897c8941852e9096f8507785d8a18f2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 Apr 2016 14:02:43 +0200 Subject: [PATCH 75/88] soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- drivers/soc/renesas/Makefile | 2 +- drivers/soc/renesas/r8a7791-sysc.c | 33 ++++++++++++++++++++++++++++++ drivers/soc/renesas/rcar-sysc.c | 3 +++ drivers/soc/renesas/rcar-sysc.h | 1 + 4 files changed, 38 insertions(+), 1 deletion(-) create mode 100644 drivers/soc/renesas/r8a7791-sysc.c diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile index 6588be3c6776f..96463c05ee594 100644 --- a/drivers/soc/renesas/Makefile +++ b/drivers/soc/renesas/Makefile @@ -1,5 +1,5 @@ obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o r8a7779-sysc.o obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o r8a7790-sysc.o -obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o +obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o r8a7791-sysc.o obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o obj-$(CONFIG_ARCH_R8A7794) += rcar-sysc.o diff --git a/drivers/soc/renesas/r8a7791-sysc.c b/drivers/soc/renesas/r8a7791-sysc.c new file mode 100644 index 0000000000000..03b9f41a34e62 --- /dev/null +++ b/drivers/soc/renesas/r8a7791-sysc.c @@ -0,0 +1,33 @@ +/* + * Renesas R-Car M2-W/N System Controller + * + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include +#include + +#include + +#include "rcar-sysc.h" + +static const struct rcar_sysc_area r8a7791_areas[] __initconst = { + { "always-on", 0, 0, R8A7791_PD_ALWAYS_ON, -1, PD_ALWAYS_ON }, + { "ca15-scu", 0x180, 0, R8A7791_PD_CA15_SCU, R8A7791_PD_ALWAYS_ON, + PD_SCU }, + { "ca15-cpu0", 0x40, 0, R8A7791_PD_CA15_CPU0, R8A7791_PD_CA15_SCU, + PD_CPU_NOCR }, + { "ca15-cpu1", 0x40, 1, R8A7791_PD_CA15_CPU1, R8A7791_PD_CA15_SCU, + PD_CPU_NOCR }, + { "sh-4a", 0x80, 0, R8A7791_PD_SH_4A, R8A7791_PD_ALWAYS_ON }, + { "sgx", 0xc0, 0, R8A7791_PD_SGX, R8A7791_PD_ALWAYS_ON }, +}; + +const struct rcar_sysc_info r8a7791_sysc_info __initconst = { + .areas = r8a7791_areas, + .num_areas = ARRAY_SIZE(r8a7791_areas), +}; diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 07ea25925e85c..5b70b93a2aa71 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -289,6 +289,9 @@ static const struct of_device_id rcar_sysc_matches[] = { #endif #ifdef CONFIG_ARCH_R8A7790 { .compatible = "renesas,r8a7790-sysc", .data = &r8a7790_sysc_info }, +#endif +#ifdef CONFIG_ARCH_R8A7791 + { .compatible = "renesas,r8a7791-sysc", .data = &r8a7791_sysc_info }, #endif { /* sentinel */ } }; diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h index 33c8f2d00a01e..d58b39400e790 100644 --- a/drivers/soc/renesas/rcar-sysc.h +++ b/drivers/soc/renesas/rcar-sysc.h @@ -52,4 +52,5 @@ struct rcar_sysc_info { extern const struct rcar_sysc_info r8a7779_sysc_info; extern const struct rcar_sysc_info r8a7790_sysc_info; +extern const struct rcar_sysc_info r8a7791_sysc_info; #endif /* __SOC_RENESAS_RCAR_SYSC_H__ */ From a247eb93ef73b56aab68c47608245e2b4a713585 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 Apr 2016 14:02:44 +0200 Subject: [PATCH 76/88] soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas R-Car M2-N is identical to R-Car M2-W w.r.t. power domains, so reuse the definitions from the latter. Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- drivers/soc/renesas/Makefile | 3 ++- drivers/soc/renesas/rcar-sysc.c | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile index 96463c05ee594..c6c4ce7ef8a14 100644 --- a/drivers/soc/renesas/Makefile +++ b/drivers/soc/renesas/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o r8a7779-sysc.o obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o r8a7790-sysc.o obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o r8a7791-sysc.o -obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o +# R-Car M2-N is identical to R-Car M2-W w.r.t. power domains. +obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o r8a7791-sysc.o obj-$(CONFIG_ARCH_R8A7794) += rcar-sysc.o diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 5b70b93a2aa71..d8eaf8b2ee202 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -292,6 +292,10 @@ static const struct of_device_id rcar_sysc_matches[] = { #endif #ifdef CONFIG_ARCH_R8A7791 { .compatible = "renesas,r8a7791-sysc", .data = &r8a7791_sysc_info }, +#endif +#ifdef CONFIG_ARCH_R8A7793 + /* R-Car M2-N is identical to R-Car M2-W w.r.t. power domains. */ + { .compatible = "renesas,r8a7793-sysc", .data = &r8a7791_sysc_info }, #endif { /* sentinel */ } }; From 9af1dbcc3028e1de8cac2d7e32345965353edde0 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 Apr 2016 14:02:45 +0200 Subject: [PATCH 77/88] soc: renesas: rcar-sysc: Add support for R-Car E2 power areas Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- drivers/soc/renesas/Makefile | 2 +- drivers/soc/renesas/r8a7794-sysc.c | 33 ++++++++++++++++++++++++++++++ drivers/soc/renesas/rcar-sysc.c | 3 +++ drivers/soc/renesas/rcar-sysc.h | 1 + 4 files changed, 38 insertions(+), 1 deletion(-) create mode 100644 drivers/soc/renesas/r8a7794-sysc.c diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile index c6c4ce7ef8a14..b328205fef364 100644 --- a/drivers/soc/renesas/Makefile +++ b/drivers/soc/renesas/Makefile @@ -3,4 +3,4 @@ obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o r8a7790-sysc.o obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o r8a7791-sysc.o # R-Car M2-N is identical to R-Car M2-W w.r.t. power domains. obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o r8a7791-sysc.o -obj-$(CONFIG_ARCH_R8A7794) += rcar-sysc.o +obj-$(CONFIG_ARCH_R8A7794) += rcar-sysc.o r8a7794-sysc.o diff --git a/drivers/soc/renesas/r8a7794-sysc.c b/drivers/soc/renesas/r8a7794-sysc.c new file mode 100644 index 0000000000000..c4da2941e06c9 --- /dev/null +++ b/drivers/soc/renesas/r8a7794-sysc.c @@ -0,0 +1,33 @@ +/* + * Renesas R-Car E2 System Controller + * + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include +#include + +#include + +#include "rcar-sysc.h" + +static const struct rcar_sysc_area r8a7794_areas[] __initconst = { + { "always-on", 0, 0, R8A7794_PD_ALWAYS_ON, -1, PD_ALWAYS_ON }, + { "ca7-scu", 0x100, 0, R8A7794_PD_CA7_SCU, R8A7794_PD_ALWAYS_ON, + PD_SCU }, + { "ca7-cpu0", 0x1c0, 0, R8A7794_PD_CA7_CPU0, R8A7794_PD_CA7_SCU, + PD_CPU_NOCR }, + { "ca7-cpu1", 0x1c0, 1, R8A7794_PD_CA7_CPU1, R8A7794_PD_CA7_SCU, + PD_CPU_NOCR }, + { "sh-4a", 0x80, 0, R8A7794_PD_SH_4A, R8A7794_PD_ALWAYS_ON }, + { "sgx", 0xc0, 0, R8A7794_PD_SGX, R8A7794_PD_ALWAYS_ON }, +}; + +const struct rcar_sysc_info r8a7794_sysc_info __initconst = { + .areas = r8a7794_areas, + .num_areas = ARRAY_SIZE(r8a7794_areas), +}; diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index d8eaf8b2ee202..e2cd99027303e 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -296,6 +296,9 @@ static const struct of_device_id rcar_sysc_matches[] = { #ifdef CONFIG_ARCH_R8A7793 /* R-Car M2-N is identical to R-Car M2-W w.r.t. power domains. */ { .compatible = "renesas,r8a7793-sysc", .data = &r8a7791_sysc_info }, +#endif +#ifdef CONFIG_ARCH_R8A7794 + { .compatible = "renesas,r8a7794-sysc", .data = &r8a7794_sysc_info }, #endif { /* sentinel */ } }; diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h index d58b39400e790..d64258cfaa20b 100644 --- a/drivers/soc/renesas/rcar-sysc.h +++ b/drivers/soc/renesas/rcar-sysc.h @@ -53,4 +53,5 @@ struct rcar_sysc_info { extern const struct rcar_sysc_info r8a7779_sysc_info; extern const struct rcar_sysc_info r8a7790_sysc_info; extern const struct rcar_sysc_info r8a7791_sysc_info; +extern const struct rcar_sysc_info r8a7794_sysc_info; #endif /* __SOC_RENESAS_RCAR_SYSC_H__ */ From 23f1e2ecdecee9f2ec45de0a468b82bb1f7f3ca2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 Apr 2016 14:02:46 +0200 Subject: [PATCH 78/88] soc: renesas: rcar-sysc: Add support for R-Car H3 power areas Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- drivers/soc/renesas/Makefile | 1 + drivers/soc/renesas/r8a7795-sysc.c | 56 ++++++++++++++++++++++++++++++ drivers/soc/renesas/rcar-sysc.c | 3 ++ drivers/soc/renesas/rcar-sysc.h | 1 + 4 files changed, 61 insertions(+) create mode 100644 drivers/soc/renesas/r8a7795-sysc.c diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile index b328205fef364..151fcd3f025b0 100644 --- a/drivers/soc/renesas/Makefile +++ b/drivers/soc/renesas/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o r8a7791-sysc.o # R-Car M2-N is identical to R-Car M2-W w.r.t. power domains. obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o r8a7791-sysc.o obj-$(CONFIG_ARCH_R8A7794) += rcar-sysc.o r8a7794-sysc.o +obj-$(CONFIG_ARCH_R8A7795) += rcar-sysc.o r8a7795-sysc.o diff --git a/drivers/soc/renesas/r8a7795-sysc.c b/drivers/soc/renesas/r8a7795-sysc.c new file mode 100644 index 0000000000000..5e7537c96f7bb --- /dev/null +++ b/drivers/soc/renesas/r8a7795-sysc.c @@ -0,0 +1,56 @@ +/* + * Renesas R-Car H3 System Controller + * + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include +#include + +#include + +#include "rcar-sysc.h" + +static const struct rcar_sysc_area r8a7795_areas[] __initconst = { + { "always-on", 0, 0, R8A7795_PD_ALWAYS_ON, -1, PD_ALWAYS_ON }, + { "ca57-scu", 0x1c0, 0, R8A7795_PD_CA57_SCU, R8A7795_PD_ALWAYS_ON, + PD_SCU }, + { "ca57-cpu0", 0x80, 0, R8A7795_PD_CA57_CPU0, R8A7795_PD_CA57_SCU, + PD_CPU_NOCR }, + { "ca57-cpu1", 0x80, 1, R8A7795_PD_CA57_CPU1, R8A7795_PD_CA57_SCU, + PD_CPU_NOCR }, + { "ca57-cpu2", 0x80, 2, R8A7795_PD_CA57_CPU2, R8A7795_PD_CA57_SCU, + PD_CPU_NOCR }, + { "ca57-cpu3", 0x80, 3, R8A7795_PD_CA57_CPU3, R8A7795_PD_CA57_SCU, + PD_CPU_NOCR }, + { "ca53-scu", 0x140, 0, R8A7795_PD_CA53_SCU, R8A7795_PD_ALWAYS_ON, + PD_SCU }, + { "ca53-cpu0", 0x200, 0, R8A7795_PD_CA53_CPU0, R8A7795_PD_CA53_SCU, + PD_CPU_NOCR }, + { "ca53-cpu1", 0x200, 1, R8A7795_PD_CA53_CPU1, R8A7795_PD_CA53_SCU, + PD_CPU_NOCR }, + { "ca53-cpu2", 0x200, 2, R8A7795_PD_CA53_CPU2, R8A7795_PD_CA53_SCU, + PD_CPU_NOCR }, + { "ca53-cpu3", 0x200, 3, R8A7795_PD_CA53_CPU3, R8A7795_PD_CA53_SCU, + PD_CPU_NOCR }, + { "a3vp", 0x340, 0, R8A7795_PD_A3VP, R8A7795_PD_ALWAYS_ON }, + { "cr7", 0x240, 0, R8A7795_PD_CR7, R8A7795_PD_ALWAYS_ON }, + { "a3vc", 0x380, 0, R8A7795_PD_A3VC, R8A7795_PD_ALWAYS_ON }, + { "a2vc0", 0x3c0, 0, R8A7795_PD_A2VC0, R8A7795_PD_A3VC }, + { "a2vc1", 0x3c0, 1, R8A7795_PD_A2VC1, R8A7795_PD_A3VC }, + { "3dg-a", 0x100, 0, R8A7795_PD_3DG_A, R8A7795_PD_ALWAYS_ON }, + { "3dg-b", 0x100, 1, R8A7795_PD_3DG_B, R8A7795_PD_3DG_A }, + { "3dg-c", 0x100, 2, R8A7795_PD_3DG_C, R8A7795_PD_3DG_B }, + { "3dg-d", 0x100, 3, R8A7795_PD_3DG_D, R8A7795_PD_3DG_C }, + { "3dg-e", 0x100, 4, R8A7795_PD_3DG_E, R8A7795_PD_3DG_D }, + { "a3ir", 0x180, 0, R8A7795_PD_A3IR, R8A7795_PD_ALWAYS_ON }, +}; + +const struct rcar_sysc_info r8a7795_sysc_info __initconst = { + .areas = r8a7795_areas, + .num_areas = ARRAY_SIZE(r8a7795_areas), +}; diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index e2cd99027303e..79dbc770895f4 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -299,6 +299,9 @@ static const struct of_device_id rcar_sysc_matches[] = { #endif #ifdef CONFIG_ARCH_R8A7794 { .compatible = "renesas,r8a7794-sysc", .data = &r8a7794_sysc_info }, +#endif +#ifdef CONFIG_ARCH_R8A7795 + { .compatible = "renesas,r8a7795-sysc", .data = &r8a7795_sysc_info }, #endif { /* sentinel */ } }; diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h index d64258cfaa20b..5e766174c2f47 100644 --- a/drivers/soc/renesas/rcar-sysc.h +++ b/drivers/soc/renesas/rcar-sysc.h @@ -54,4 +54,5 @@ extern const struct rcar_sysc_info r8a7779_sysc_info; extern const struct rcar_sysc_info r8a7790_sysc_info; extern const struct rcar_sysc_info r8a7791_sysc_info; extern const struct rcar_sysc_info r8a7794_sysc_info; +extern const struct rcar_sysc_info r8a7795_sysc_info; #endif /* __SOC_RENESAS_RCAR_SYSC_H__ */ From b2df3aa487395a1b7170b719569769bc78939dd1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 3 Jun 2015 10:14:01 +0200 Subject: [PATCH 79/88] ARM: dts: r8a7779: Add SYSC PM Domains Add a device node for the System Controller. Hook up ARM CPU cores 1-3 to their respective PM Domains. Note that ARM CPU core 0 cannot be shut off. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7779.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 5c1d48d712a18..e02875a8c040f 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -14,6 +14,7 @@ #include #include #include +#include / { compatible = "renesas,r8a7779"; @@ -34,18 +35,21 @@ compatible = "arm,cortex-a9"; reg = <1>; clock-frequency = <1000000000>; + power-domains = <&sysc R8A7779_PD_ARM1>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; clock-frequency = <1000000000>; + power-domains = <&sysc R8A7779_PD_ARM2>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; clock-frequency = <1000000000>; + power-domains = <&sysc R8A7779_PD_ARM3>; }; }; @@ -586,4 +590,10 @@ "mmc1", "mmc0"; }; }; + + sysc: system-controller@ffd85000 { + compatible = "renesas,r8a7779-sysc"; + reg = <0xffd85000 0x0200>; + #power-domain-cells = <1>; + }; }; From 4c8eb3c8896d842d3fb4802dc6e5f39733596733 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 20 Jan 2015 14:44:58 +0100 Subject: [PATCH 80/88] ARM: dts: r8a7790: Add SYSC PM Domains Add a device node for the System Controller. Hook up the Cortex-A15 and Cortex-A7 CPU cores and L2 caches/SCUs to their respective PM Domains. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 776a2aed81d2e..36c91d9217713 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -13,6 +13,7 @@ #include #include #include +#include / { compatible = "renesas,r8a7790"; @@ -52,6 +53,7 @@ voltage-tolerance = <1>; /* 1% */ clocks = <&cpg_clocks R8A7790_CLK_Z>; clock-latency = <300000>; /* 300 us */ + power-domains = <&sysc R8A7790_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */ @@ -68,6 +70,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1300000000>; + power-domains = <&sysc R8A7790_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; @@ -76,6 +79,7 @@ compatible = "arm,cortex-a15"; reg = <2>; clock-frequency = <1300000000>; + power-domains = <&sysc R8A7790_PD_CA15_CPU2>; next-level-cache = <&L2_CA15>; }; @@ -84,6 +88,7 @@ compatible = "arm,cortex-a15"; reg = <3>; clock-frequency = <1300000000>; + power-domains = <&sysc R8A7790_PD_CA15_CPU3>; next-level-cache = <&L2_CA15>; }; @@ -92,6 +97,7 @@ compatible = "arm,cortex-a7"; reg = <0x100>; clock-frequency = <780000000>; + power-domains = <&sysc R8A7790_PD_CA7_CPU0>; next-level-cache = <&L2_CA7>; }; @@ -100,6 +106,7 @@ compatible = "arm,cortex-a7"; reg = <0x101>; clock-frequency = <780000000>; + power-domains = <&sysc R8A7790_PD_CA7_CPU1>; next-level-cache = <&L2_CA7>; }; @@ -108,6 +115,7 @@ compatible = "arm,cortex-a7"; reg = <0x102>; clock-frequency = <780000000>; + power-domains = <&sysc R8A7790_PD_CA7_CPU2>; next-level-cache = <&L2_CA7>; }; @@ -116,6 +124,7 @@ compatible = "arm,cortex-a7"; reg = <0x103>; clock-frequency = <780000000>; + power-domains = <&sysc R8A7790_PD_CA7_CPU3>; next-level-cache = <&L2_CA7>; }; }; @@ -141,12 +150,14 @@ L2_CA15: cache-controller@0 { compatible = "cache"; + power-domains = <&sysc R8A7790_PD_CA15_SCU>; cache-unified; cache-level = <2>; }; L2_CA7: cache-controller@1 { compatible = "cache"; + power-domains = <&sysc R8A7790_PD_CA7_SCU>; cache-unified; cache-level = <2>; }; @@ -1450,6 +1461,12 @@ }; }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7790-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7790", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; From 8574de861978d5187da4f2b7dcf127a5795e967f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 20 Jan 2015 14:44:58 +0100 Subject: [PATCH 81/88] ARM: dts: r8a7791: Add SYSC PM Domains Add a device node for the System Controller. Hook up the Cortex-A15 CPU cores and the Cortex-A15 L2 cache/SCU to their respective PM Domains. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6d4a0b6e4df9d..e30200c9476a8 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -13,6 +13,7 @@ #include #include #include +#include / { compatible = "renesas,r8a7791"; @@ -51,6 +52,7 @@ voltage-tolerance = <1>; /* 1% */ clocks = <&cpg_clocks R8A7791_CLK_Z>; clock-latency = <300000>; /* 300 us */ + power-domains = <&sysc R8A7791_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */ @@ -67,6 +69,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + power-domains = <&sysc R8A7791_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; }; @@ -92,6 +95,7 @@ L2_CA15: cache-controller@0 { compatible = "cache"; + power-domains = <&sysc R8A7791_PD_CA15_SCU>; cache-unified; cache-level = <2>; }; @@ -1466,6 +1470,12 @@ }; }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7791-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7791", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; From a7ede1abeefd69330c5dd45b335d22af1e2baf2e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 3 Jun 2015 10:43:13 +0200 Subject: [PATCH 82/88] ARM: dts: r8a7793: Add SYSC PM Domains Add a device node for the System Controller. Hook up the first Cortex-A15 CPU core and the Cortex-A15 L2 cache/SCU to their respective PM Domains. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7793.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 6186179fd66db..53e235e3279d0 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -11,6 +11,7 @@ #include #include #include +#include / { compatible = "renesas,r8a7793"; @@ -43,6 +44,7 @@ voltage-tolerance = <1>; /* 1% */ clocks = <&cpg_clocks R8A7793_CLK_Z>; clock-latency = <300000>; /* 300 us */ + power-domains = <&sysc R8A7793_PD_CA15_CPU0>; /* kHz - uV - OPPs unknown yet */ operating-points = <1500000 1000000>, @@ -76,6 +78,7 @@ L2_CA15: cache-controller@0 { compatible = "cache"; + power-domains = <&sysc R8A7793_PD_CA15_SCU>; cache-unified; cache-level = <2>; }; @@ -1223,6 +1226,12 @@ }; }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7793-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; From 0761ff2ad0c581f37067eff8c4bde65f07029fc8 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 20 Jan 2015 14:44:58 +0100 Subject: [PATCH 83/88] ARM: dts: r8a7794: Add SYSC PM Domains Add a device node for the System Controller. Hook up the Cortex-A7 CPU cores and the Cortex-A7 L2 cache/SCU to their respective PM Domains. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index b0bce43779f14..70eff80a813ec 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -12,6 +12,7 @@ #include #include #include +#include / { compatible = "renesas,r8a7794"; @@ -42,6 +43,7 @@ compatible = "arm,cortex-a7"; reg = <0>; clock-frequency = <1000000000>; + power-domains = <&sysc R8A7794_PD_CA7_CPU0>; next-level-cache = <&L2_CA7>; }; @@ -50,12 +52,14 @@ compatible = "arm,cortex-a7"; reg = <1>; clock-frequency = <1000000000>; + power-domains = <&sysc R8A7794_PD_CA7_CPU1>; next-level-cache = <&L2_CA7>; }; }; L2_CA7: cache-controller@1 { compatible = "cache"; + power-domains = <&sysc R8A7794_PD_CA7_SCU>; cache-unified; cache-level = <2>; }; @@ -1215,6 +1219,12 @@ }; }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7794-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; From 751e29bbb64ad091c6f51704f31224aaec560f69 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 3 Jun 2015 10:14:01 +0200 Subject: [PATCH 84/88] ARM: dts: r8a7779: Use SYSC "always-on" PM Domain Hook up all devices that are part of the CPG/MSTP Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7779.dtsi | 44 +++++++++++++++++----------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index e02875a8c040f..d43e3b2105aef 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -177,7 +177,7 @@ reg = <0xffc70000 0x1000>; interrupts = ; clocks = <&mstp0_clks R8A7779_CLK_I2C0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -188,7 +188,7 @@ reg = <0xffc71000 0x1000>; interrupts = ; clocks = <&mstp0_clks R8A7779_CLK_I2C1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -199,7 +199,7 @@ reg = <0xffc72000 0x1000>; interrupts = ; clocks = <&mstp0_clks R8A7779_CLK_I2C2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -210,7 +210,7 @@ reg = <0xffc73000 0x1000>; interrupts = ; clocks = <&mstp0_clks R8A7779_CLK_I2C3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -222,7 +222,7 @@ clocks = <&mstp0_clks R8A7779_CLK_SCIF0>, <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -234,7 +234,7 @@ clocks = <&mstp0_clks R8A7779_CLK_SCIF1>, <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -246,7 +246,7 @@ clocks = <&mstp0_clks R8A7779_CLK_SCIF2>, <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -258,7 +258,7 @@ clocks = <&mstp0_clks R8A7779_CLK_SCIF3>, <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -270,7 +270,7 @@ clocks = <&mstp0_clks R8A7779_CLK_SCIF4>, <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -282,7 +282,7 @@ clocks = <&mstp0_clks R8A7779_CLK_SCIF5>, <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -304,7 +304,7 @@ ; clocks = <&mstp0_clks R8A7779_CLK_TMU0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; #renesas,channels = <3>; @@ -319,7 +319,7 @@ ; clocks = <&mstp0_clks R8A7779_CLK_TMU1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; #renesas,channels = <3>; @@ -334,7 +334,7 @@ ; clocks = <&mstp0_clks R8A7779_CLK_TMU2>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; #renesas,channels = <3>; @@ -346,7 +346,7 @@ reg = <0xfc600000 0x2000>; interrupts = ; clocks = <&mstp1_clks R8A7779_CLK_SATA>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; }; sdhi0: sd@ffe4c000 { @@ -354,7 +354,7 @@ reg = <0xffe4c000 0x100>; interrupts = ; clocks = <&mstp3_clks R8A7779_CLK_SDHI0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -363,7 +363,7 @@ reg = <0xffe4d000 0x100>; interrupts = ; clocks = <&mstp3_clks R8A7779_CLK_SDHI1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -372,7 +372,7 @@ reg = <0xffe4e000 0x100>; interrupts = ; clocks = <&mstp3_clks R8A7779_CLK_SDHI2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -381,7 +381,7 @@ reg = <0xffe4f000 0x100>; interrupts = ; clocks = <&mstp3_clks R8A7779_CLK_SDHI3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -392,7 +392,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -403,7 +403,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -414,7 +414,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -423,7 +423,7 @@ reg = <0 0xfff80000 0 0x40000>; interrupts = ; clocks = <&mstp1_clks R8A7779_CLK_DU>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; ports { From 36ee3c277e018f71d456e3d7eac2c2887128a4db Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 20 Jan 2015 14:44:58 +0100 Subject: [PATCH 85/88] ARM: dts: r8a7790: Use SYSC "always-on" PM Domain Hook up all devices that are part of the CPG/MSTP Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 138 ++++++++++++++++----------------- 1 file changed, 69 insertions(+), 69 deletions(-) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 36c91d9217713..dc8497b155867 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -184,7 +184,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; gpio1: gpio@e6051000 { @@ -197,7 +197,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; gpio2: gpio@e6052000 { @@ -210,7 +210,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; gpio3: gpio@e6053000 { @@ -223,7 +223,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; gpio4: gpio@e6054000 { @@ -236,7 +236,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO4>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; gpio5: gpio@e6055000 { @@ -249,7 +249,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO5>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; thermal: thermal@e61f0000 { @@ -259,7 +259,7 @@ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = ; clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #thermal-sensor-cells = <0>; }; @@ -278,7 +278,7 @@ ; clocks = <&mstp1_clks R8A7790_CLK_CMT0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; renesas,channels-mask = <0x60>; @@ -298,7 +298,7 @@ ; clocks = <&mstp3_clks R8A7790_CLK_CMT1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; renesas,channels-mask = <0xff>; @@ -315,7 +315,7 @@ , ; clocks = <&mstp4_clks R8A7790_CLK_IRQC>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; dmac0: dma-controller@e6700000 { @@ -344,7 +344,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; }; @@ -375,7 +375,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; }; @@ -404,7 +404,7 @@ "ch12"; clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <13>; }; @@ -433,7 +433,7 @@ "ch12"; clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <13>; }; @@ -445,7 +445,7 @@ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <2>; }; @@ -457,7 +457,7 @@ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <2>; }; @@ -469,7 +469,7 @@ reg = <0 0xe6508000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7790_CLK_I2C0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -481,7 +481,7 @@ reg = <0 0xe6518000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7790_CLK_I2C1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -493,7 +493,7 @@ reg = <0 0xe6530000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7790_CLK_I2C2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -505,7 +505,7 @@ reg = <0 0xe6540000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7790_CLK_I2C3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -519,7 +519,7 @@ clocks = <&mstp3_clks R8A7790_CLK_IIC0>; dmas = <&dmac0 0x61>, <&dmac0 0x62>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -532,7 +532,7 @@ clocks = <&mstp3_clks R8A7790_CLK_IIC1>; dmas = <&dmac0 0x65>, <&dmac0 0x66>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -545,7 +545,7 @@ clocks = <&mstp3_clks R8A7790_CLK_IIC2>; dmas = <&dmac0 0x69>, <&dmac0 0x6a>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -558,7 +558,7 @@ clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; dmas = <&dmac0 0x77>, <&dmac0 0x78>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -569,7 +569,7 @@ clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -582,7 +582,7 @@ clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>; dmas = <&dmac0 0xe1>, <&dmac0 0xe2>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -601,7 +601,7 @@ dmas = <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx"; max-frequency = <195000000>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -613,7 +613,7 @@ dmas = <&dmac1 0xc9>, <&dmac1 0xca>; dma-names = "tx", "rx"; max-frequency = <195000000>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -625,7 +625,7 @@ dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx"; max-frequency = <97500000>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -637,7 +637,7 @@ dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx"; max-frequency = <97500000>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -650,7 +650,7 @@ clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -663,7 +663,7 @@ clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -676,7 +676,7 @@ clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -689,7 +689,7 @@ clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -702,7 +702,7 @@ clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -715,7 +715,7 @@ clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -729,7 +729,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -743,7 +743,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -757,7 +757,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -771,7 +771,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -785,7 +785,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -794,7 +794,7 @@ reg = <0 0xee700000 0 0x400>; interrupts = ; clocks = <&mstp8_clks R8A7790_CLK_ETHER>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -807,7 +807,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = ; clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -818,7 +818,7 @@ reg = <0 0xee300000 0 0x2000>; interrupts = ; clocks = <&mstp8_clks R8A7790_CLK_SATA0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -827,7 +827,7 @@ reg = <0 0xee500000 0 0x2000>; interrupts = ; clocks = <&mstp8_clks R8A7790_CLK_SATA1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -839,7 +839,7 @@ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb"; @@ -853,7 +853,7 @@ #size-cells = <0>; clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; clock-names = "usbhs"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; usb0: usb-channel@0 { @@ -871,7 +871,7 @@ reg = <0 0xe6ef0000 0 0x1000>; interrupts = ; clocks = <&mstp8_clks R8A7790_CLK_VIN0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -880,7 +880,7 @@ reg = <0 0xe6ef1000 0 0x1000>; interrupts = ; clocks = <&mstp8_clks R8A7790_CLK_VIN1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -889,7 +889,7 @@ reg = <0 0xe6ef2000 0 0x1000>; interrupts = ; clocks = <&mstp8_clks R8A7790_CLK_VIN2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -898,7 +898,7 @@ reg = <0 0xe6ef3000 0 0x1000>; interrupts = ; clocks = <&mstp8_clks R8A7790_CLK_VIN3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -907,7 +907,7 @@ reg = <0 0xfe920000 0 0x8000>; interrupts = ; clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; renesas,has-sru; renesas,#rpf = <5>; @@ -920,7 +920,7 @@ reg = <0 0xfe928000 0 0x8000>; interrupts = ; clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; renesas,has-lut; renesas,has-sru; @@ -934,7 +934,7 @@ reg = <0 0xfe930000 0 0x8000>; interrupts = ; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; renesas,has-lif; renesas,has-lut; @@ -948,7 +948,7 @@ reg = <0 0xfe938000 0 0x8000>; interrupts = ; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; renesas,has-lif; renesas,has-lut; @@ -1003,7 +1003,7 @@ clocks = <&mstp9_clks R8A7790_CLK_RCAN0>, <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1014,7 +1014,7 @@ clocks = <&mstp9_clks R8A7790_CLK_RCAN1>, <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1023,7 +1023,7 @@ reg = <0 0xfe980000 0 0x10300>; interrupts = ; clocks = <&mstp1_clks R8A7790_CLK_JPU>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; clocks { @@ -1474,7 +1474,7 @@ clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -1488,7 +1488,7 @@ clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1501,7 +1501,7 @@ clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1514,7 +1514,7 @@ clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1527,7 +1527,7 @@ clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; dmas = <&dmac0 0x45>, <&dmac0 0x46>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1538,7 +1538,7 @@ reg = <0 0xee000000 0 0xc00>; interrupts = ; clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; phys = <&usb2 1>; phy-names = "usb"; status = "disabled"; @@ -1551,7 +1551,7 @@ <0 0xee080000 0 0x1100>; interrupts = ; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; bus-range = <0 0>; @@ -1586,7 +1586,7 @@ <0 0xee0a0000 0 0x1100>; interrupts = ; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; bus-range = <1 1>; @@ -1604,7 +1604,7 @@ compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; device_type = "pci"; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; interrupts = ; @@ -1657,7 +1657,7 @@ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1700,7 +1700,7 @@ "mix.0", "mix.1", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; From 5aa806503b48367e2e6e5ae2a6890805e40c4776 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 20 Jan 2015 14:44:58 +0100 Subject: [PATCH 86/88] ARM: dts: r8a7791: Use SYSC "always-on" PM Domain Hook up all devices that are part of the CPG/MSTP Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 146 ++++++++++++++++----------------- 1 file changed, 73 insertions(+), 73 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index e30200c9476a8..c40f950dfc193 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -122,7 +122,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio1: gpio@e6051000 { @@ -135,7 +135,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio2: gpio@e6052000 { @@ -148,7 +148,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio3: gpio@e6053000 { @@ -161,7 +161,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio4: gpio@e6054000 { @@ -174,7 +174,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO4>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio5: gpio@e6055000 { @@ -187,7 +187,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO5>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio6: gpio@e6055400 { @@ -200,7 +200,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO6>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio7: gpio@e6055800 { @@ -213,7 +213,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO7>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; thermal: thermal@e61f0000 { @@ -223,7 +223,7 @@ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = ; clocks = <&mstp5_clks R8A7791_CLK_THERMAL>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #thermal-sensor-cells = <0>; }; @@ -242,7 +242,7 @@ ; clocks = <&mstp1_clks R8A7791_CLK_CMT0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; renesas,channels-mask = <0x60>; @@ -262,7 +262,7 @@ ; clocks = <&mstp3_clks R8A7791_CLK_CMT1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; renesas,channels-mask = <0xff>; @@ -285,7 +285,7 @@ , ; clocks = <&mstp4_clks R8A7791_CLK_IRQC>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; dmac0: dma-controller@e6700000 { @@ -314,7 +314,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; }; @@ -345,7 +345,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; }; @@ -374,7 +374,7 @@ "ch12"; clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <13>; }; @@ -403,7 +403,7 @@ "ch12"; clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <13>; }; @@ -415,7 +415,7 @@ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <2>; }; @@ -427,7 +427,7 @@ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <2>; }; @@ -440,7 +440,7 @@ reg = <0 0xe6508000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7791_CLK_I2C0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -452,7 +452,7 @@ reg = <0 0xe6518000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7791_CLK_I2C1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -464,7 +464,7 @@ reg = <0 0xe6530000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7791_CLK_I2C2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -476,7 +476,7 @@ reg = <0 0xe6540000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7791_CLK_I2C3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -488,7 +488,7 @@ reg = <0 0xe6520000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7791_CLK_I2C4>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -501,7 +501,7 @@ reg = <0 0xe6528000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7791_CLK_I2C5>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -516,7 +516,7 @@ clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; dmas = <&dmac0 0x77>, <&dmac0 0x78>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -529,7 +529,7 @@ clocks = <&mstp3_clks R8A7791_CLK_IIC0>; dmas = <&dmac0 0x61>, <&dmac0 0x62>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -542,7 +542,7 @@ clocks = <&mstp3_clks R8A7791_CLK_IIC1>; dmas = <&dmac0 0x65>, <&dmac0 0x66>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -558,7 +558,7 @@ clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -571,7 +571,7 @@ clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; dmas = <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -582,7 +582,7 @@ clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -593,7 +593,7 @@ clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -606,7 +606,7 @@ clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -619,7 +619,7 @@ clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -632,7 +632,7 @@ clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -645,7 +645,7 @@ clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -658,7 +658,7 @@ clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -671,7 +671,7 @@ clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -684,7 +684,7 @@ clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -697,7 +697,7 @@ clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -710,7 +710,7 @@ clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -724,7 +724,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -738,7 +738,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -752,7 +752,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -766,7 +766,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -780,7 +780,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -794,7 +794,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -808,7 +808,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -822,7 +822,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -836,7 +836,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -845,7 +845,7 @@ reg = <0 0xee700000 0 0x400>; interrupts = ; clocks = <&mstp8_clks R8A7791_CLK_ETHER>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -858,7 +858,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = ; clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -869,7 +869,7 @@ reg = <0 0xee300000 0 0x2000>; interrupts = ; clocks = <&mstp8_clks R8A7791_CLK_SATA0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -878,7 +878,7 @@ reg = <0 0xee500000 0 0x2000>; interrupts = ; clocks = <&mstp8_clks R8A7791_CLK_SATA1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -890,7 +890,7 @@ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb"; @@ -904,7 +904,7 @@ #size-cells = <0>; clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; clock-names = "usbhs"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; usb0: usb-channel@0 { @@ -922,7 +922,7 @@ reg = <0 0xe6ef0000 0 0x1000>; interrupts = ; clocks = <&mstp8_clks R8A7791_CLK_VIN0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -931,7 +931,7 @@ reg = <0 0xe6ef1000 0 0x1000>; interrupts = ; clocks = <&mstp8_clks R8A7791_CLK_VIN1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -940,7 +940,7 @@ reg = <0 0xe6ef2000 0 0x1000>; interrupts = ; clocks = <&mstp8_clks R8A7791_CLK_VIN2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -949,7 +949,7 @@ reg = <0 0xfe928000 0 0x8000>; interrupts = ; clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; renesas,has-lut; renesas,has-sru; @@ -963,7 +963,7 @@ reg = <0 0xfe930000 0 0x8000>; interrupts = ; clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; renesas,has-lif; renesas,has-lut; @@ -977,7 +977,7 @@ reg = <0 0xfe938000 0 0x8000>; interrupts = ; clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; renesas,has-lif; renesas,has-lut; @@ -1023,7 +1023,7 @@ clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1034,7 +1034,7 @@ clocks = <&mstp9_clks R8A7791_CLK_RCAN1>, <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1043,7 +1043,7 @@ reg = <0 0xfe980000 0 0x10300>; interrupts = ; clocks = <&mstp1_clks R8A7791_CLK_JPU>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; clocks { @@ -1483,7 +1483,7 @@ clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -1497,7 +1497,7 @@ clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1510,7 +1510,7 @@ clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1523,7 +1523,7 @@ clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1534,7 +1534,7 @@ reg = <0 0xee000000 0 0xc00>; interrupts = ; clocks = <&mstp3_clks R8A7791_CLK_SSUSB>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; phys = <&usb2 1>; phy-names = "usb"; status = "disabled"; @@ -1547,7 +1547,7 @@ <0 0xee080000 0 0x1100>; interrupts = ; clocks = <&mstp7_clks R8A7791_CLK_EHCI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; bus-range = <0 0>; @@ -1582,7 +1582,7 @@ <0 0xee0c0000 0 0x1100>; interrupts = ; clocks = <&mstp7_clks R8A7791_CLK_EHCI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; bus-range = <1 1>; @@ -1632,7 +1632,7 @@ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1735,7 +1735,7 @@ "mix.0", "mix.1", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; From f1ba73eae71fde882dcb6ca5fa61f1b3bffb7e3e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 3 Jun 2015 10:43:13 +0200 Subject: [PATCH 87/88] ARM: dts: r8a7793: Use SYSC "always-on" PM Domain Hook up all devices that are part of the CPG/MSTP Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7793.dtsi | 102 ++++++++++++++++----------------- 1 file changed, 51 insertions(+), 51 deletions(-) diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 53e235e3279d0..2abf2e4896991 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -105,7 +105,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio1: gpio@e6051000 { @@ -118,7 +118,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio2: gpio@e6052000 { @@ -131,7 +131,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio3: gpio@e6053000 { @@ -144,7 +144,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio4: gpio@e6054000 { @@ -157,7 +157,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO4>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio5: gpio@e6055000 { @@ -170,7 +170,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO5>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio6: gpio@e6055400 { @@ -183,7 +183,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO6>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio7: gpio@e6055800 { @@ -196,7 +196,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO7>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; thermal: thermal@e61f0000 { @@ -206,7 +206,7 @@ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = ; clocks = <&mstp5_clks R8A7793_CLK_THERMAL>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; #thermal-sensor-cells = <0>; }; @@ -225,7 +225,7 @@ ; clocks = <&mstp1_clks R8A7793_CLK_CMT0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; renesas,channels-mask = <0x60>; @@ -245,7 +245,7 @@ ; clocks = <&mstp3_clks R8A7793_CLK_CMT1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; renesas,channels-mask = <0xff>; @@ -268,7 +268,7 @@ , ; clocks = <&mstp4_clks R8A7793_CLK_IRQC>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; dmac0: dma-controller@e6700000 { @@ -297,7 +297,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; }; @@ -328,7 +328,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; }; @@ -357,7 +357,7 @@ "ch12"; clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <13>; }; @@ -386,7 +386,7 @@ "ch12"; clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <13>; }; @@ -399,7 +399,7 @@ reg = <0 0xe6508000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7793_CLK_I2C0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -411,7 +411,7 @@ reg = <0 0xe6518000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7793_CLK_I2C1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -423,7 +423,7 @@ reg = <0 0xe6530000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7793_CLK_I2C2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -435,7 +435,7 @@ reg = <0 0xe6540000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7793_CLK_I2C3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -447,7 +447,7 @@ reg = <0 0xe6520000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7793_CLK_I2C4>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -460,7 +460,7 @@ reg = <0 0xe6528000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7793_CLK_I2C5>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -475,7 +475,7 @@ clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>; dmas = <&dmac0 0x77>, <&dmac0 0x78>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -488,7 +488,7 @@ clocks = <&mstp3_clks R8A7793_CLK_IIC0>; dmas = <&dmac0 0x61>, <&dmac0 0x62>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -501,7 +501,7 @@ clocks = <&mstp3_clks R8A7793_CLK_IIC1>; dmas = <&dmac0 0x65>, <&dmac0 0x66>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -517,7 +517,7 @@ clocks = <&mstp3_clks R8A7793_CLK_SDHI0>; dmas = <&dmac0 0xcd>, <&dmac0 0xce>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -528,7 +528,7 @@ clocks = <&mstp3_clks R8A7793_CLK_SDHI1>; dmas = <&dmac0 0xc1>, <&dmac0 0xc2>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -539,7 +539,7 @@ clocks = <&mstp3_clks R8A7793_CLK_SDHI2>; dmas = <&dmac0 0xd3>, <&dmac0 0xd4>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -552,7 +552,7 @@ clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -565,7 +565,7 @@ clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -578,7 +578,7 @@ clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -591,7 +591,7 @@ clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -604,7 +604,7 @@ clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -617,7 +617,7 @@ clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -630,7 +630,7 @@ clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -643,7 +643,7 @@ clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -656,7 +656,7 @@ clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -670,7 +670,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -684,7 +684,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -698,7 +698,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -712,7 +712,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -726,7 +726,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -740,7 +740,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -754,7 +754,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -768,7 +768,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -782,7 +782,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -791,7 +791,7 @@ reg = <0 0xee700000 0 0x400>; interrupts = ; clocks = <&mstp8_clks R8A7793_CLK_ETHER>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -805,7 +805,7 @@ clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -849,7 +849,7 @@ clocks = <&mstp9_clks R8A7793_CLK_RCAN0>, <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -860,7 +860,7 @@ clocks = <&mstp9_clks R8A7793_CLK_RCAN1>, <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1327,7 +1327,7 @@ "src.4", "src.3", "src.2", "src.1", "src.0", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; From 25611e4ef5bb290805305d499715a840826462f3 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 20 Jan 2015 14:44:58 +0100 Subject: [PATCH 88/88] ARM: dts: r8a7794: Use SYSC "always-on" PM Domain Hook up all devices that are part of the CPG/MSTP Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 106 ++++++++++++++++----------------- 1 file changed, 53 insertions(+), 53 deletions(-) diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 70eff80a813ec..136911c1dc744 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -86,7 +86,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7794_CLK_GPIO0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; gpio1: gpio@e6051000 { @@ -99,7 +99,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7794_CLK_GPIO1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; gpio2: gpio@e6052000 { @@ -112,7 +112,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7794_CLK_GPIO2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; gpio3: gpio@e6053000 { @@ -125,7 +125,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7794_CLK_GPIO3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; gpio4: gpio@e6054000 { @@ -138,7 +138,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7794_CLK_GPIO4>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; gpio5: gpio@e6055000 { @@ -151,7 +151,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7794_CLK_GPIO5>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; gpio6: gpio@e6055400 { @@ -164,7 +164,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7794_CLK_GPIO6>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; cmt0: timer@ffca0000 { @@ -174,7 +174,7 @@ ; clocks = <&mstp1_clks R8A7794_CLK_CMT0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; renesas,channels-mask = <0x60>; @@ -194,7 +194,7 @@ ; clocks = <&mstp3_clks R8A7794_CLK_CMT1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; renesas,channels-mask = <0xff>; @@ -225,7 +225,7 @@ , ; clocks = <&mstp4_clks R8A7794_CLK_IRQC>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; pfc: pin-controller@e6060000 { @@ -259,7 +259,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; }; @@ -290,7 +290,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; }; @@ -304,7 +304,7 @@ clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -317,7 +317,7 @@ clock-names = "fck"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -330,7 +330,7 @@ clock-names = "fck"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -343,7 +343,7 @@ clock-names = "fck"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -356,7 +356,7 @@ clock-names = "fck"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -369,7 +369,7 @@ clock-names = "fck"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -382,7 +382,7 @@ clock-names = "fck"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -395,7 +395,7 @@ clock-names = "fck"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -408,7 +408,7 @@ clock-names = "fck"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -422,7 +422,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -436,7 +436,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -450,7 +450,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -464,7 +464,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -478,7 +478,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -492,7 +492,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -506,7 +506,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -520,7 +520,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -534,7 +534,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -543,7 +543,7 @@ reg = <0 0xee700000 0 0x400>; interrupts = ; clocks = <&mstp8_clks R8A7794_CLK_ETHER>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -556,7 +556,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = ; clocks = <&mstp8_clks R8A7794_CLK_ETHERAVB>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -568,7 +568,7 @@ reg = <0 0xe6508000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7794_CLK_I2C0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -580,7 +580,7 @@ reg = <0 0xe6518000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7794_CLK_I2C1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -592,7 +592,7 @@ reg = <0 0xe6530000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7794_CLK_I2C2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -604,7 +604,7 @@ reg = <0 0xe6540000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7794_CLK_I2C3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -616,7 +616,7 @@ reg = <0 0xe6520000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7794_CLK_I2C4>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -628,7 +628,7 @@ reg = <0 0xe6528000 0 0x40>; interrupts = ; clocks = <&mstp9_clks R8A7794_CLK_I2C5>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>; @@ -642,7 +642,7 @@ clocks = <&mstp3_clks R8A7794_CLK_IIC0>; dmas = <&dmac0 0x61>, <&dmac0 0x62>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -655,7 +655,7 @@ clocks = <&mstp3_clks R8A7794_CLK_IIC1>; dmas = <&dmac0 0x65>, <&dmac0 0x66>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -668,7 +668,7 @@ clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; }; @@ -678,7 +678,7 @@ reg = <0 0xee100000 0 0x200>; interrupts = ; clocks = <&mstp3_clks R8A7794_CLK_SDHI0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -687,7 +687,7 @@ reg = <0 0xee140000 0 0x100>; interrupts = ; clocks = <&mstp3_clks R8A7794_CLK_SDHI1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -696,7 +696,7 @@ reg = <0 0xee160000 0 0x100>; interrupts = ; clocks = <&mstp3_clks R8A7794_CLK_SDHI2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -707,7 +707,7 @@ clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -719,7 +719,7 @@ reg = <0 0xe6ef0000 0 0x1000>; interrupts = ; clocks = <&mstp8_clks R8A7794_CLK_VIN0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -728,7 +728,7 @@ reg = <0 0xe6ef1000 0 0x1000>; interrupts = ; clocks = <&mstp8_clks R8A7794_CLK_VIN1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -739,7 +739,7 @@ <0 0xee080000 0 0x1100>; interrupts = ; clocks = <&mstp7_clks R8A7794_CLK_EHCI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; bus-range = <0 0>; @@ -774,7 +774,7 @@ <0 0xee0c0000 0 0x1100>; interrupts = ; clocks = <&mstp7_clks R8A7794_CLK_EHCI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; bus-range = <1 1>; @@ -807,7 +807,7 @@ reg = <0 0xe6590000 0 0x100>; interrupts = ; clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb"; @@ -821,7 +821,7 @@ #size-cells = <0>; clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; clock-names = "usbhs"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; usb0: usb-channel@0 { @@ -869,7 +869,7 @@ clocks = <&mstp9_clks R8A7794_CLK_RCAN0>, <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -880,7 +880,7 @@ clocks = <&mstp9_clks R8A7794_CLK_RCAN1>, <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };