From 240c1948491b81cfe40f84ea040a8f2a4966f101 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Tue, 10 Mar 2020 18:38:01 +0100 Subject: [PATCH 1/3] s390/qeth: don't reset default_out_queue When an OSA device in prio-queue setup is reduced to 1 TX queue due to HW restrictions, we reset its the default_out_queue to 0. In the old code this was needed so that qeth_get_priority_queue() gets the queue selection right. But with proper multiqueue support we already reduced dev->real_num_tx_queues to 1, and so the stack puts all traffic on txq 0 without even calling .ndo_select_queue. Thus we can preserve the user's configuration, and apply it if the OSA device later re-gains support for multiple TX queues. Fixes: 73dc2daf110f ("s390/qeth: add TX multiqueue support for OSA devices") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 8ca85c8a01a15..2a05d13a0e796 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -1204,7 +1204,6 @@ static int qeth_osa_set_output_queues(struct qeth_card *card, bool single) if (count == 1) dev_info(&card->gdev->dev, "Priority Queueing not supported\n"); - card->qdio.default_out_queue = single ? 0 : QETH_DEFAULT_QUEUE; card->qdio.no_out_queues = count; return 0; } From 17413852804d7e86e6f0576cca32c1541817800e Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Tue, 10 Mar 2020 18:38:02 +0100 Subject: [PATCH 2/3] s390/qeth: handle error when backing RX buffer qeth_init_qdio_queues() fills the RX ring with an initial set of RX buffers. If qeth_init_input_buffer() fails to back one of the RX buffers with memory, we need to bail out and report the error. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 2a05d13a0e796..d8f0c610396ec 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2624,12 +2624,12 @@ static int qeth_init_input_buffer(struct qeth_card *card, ETH_HLEN + sizeof(struct ipv6hdr)); if (!buf->rx_skb) - return 1; + return -ENOMEM; } pool_entry = qeth_find_free_buffer_pool_entry(card); if (!pool_entry) - return 1; + return -ENOBUFS; /* * since the buffer is accessed only from the input_tasklet @@ -2674,10 +2674,15 @@ static int qeth_init_qdio_queues(struct qeth_card *card) /* inbound queue */ qdio_reset_buffers(card->qdio.in_q->qdio_bufs, QDIO_MAX_BUFFERS_PER_Q); memset(&card->rx, 0, sizeof(struct qeth_rx)); + qeth_initialize_working_pool_list(card); /*give only as many buffers to hardware as we have buffer pool entries*/ - for (i = 0; i < card->qdio.in_buf_pool.buf_count - 1; ++i) - qeth_init_input_buffer(card, &card->qdio.in_q->bufs[i]); + for (i = 0; i < card->qdio.in_buf_pool.buf_count - 1; i++) { + rc = qeth_init_input_buffer(card, &card->qdio.in_q->bufs[i]); + if (rc) + return rc; + } + card->qdio.in_q->next_buf_to_init = card->qdio.in_buf_pool.buf_count - 1; rc = do_QDIO(CARD_DDEV(card), QDIO_FLAG_SYNC_INPUT, 0, 0, From 0e635c2a8713e3e013b4adcb7cb7e28a048b7c42 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Tue, 10 Mar 2020 18:38:03 +0100 Subject: [PATCH 3/3] s390/qeth: cancel RX reclaim work earlier When qeth's napi poll code fails to refill an entirely empty RX ring, it kicks off buffer_reclaim_work to try again later. Make sure that this worker is cancelled when setting the qeth device offline. Otherwise a RX refill action can unexpectedly end up running concurrently to bigger re-configurations (eg. resizing the buffer pool), without any locking. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 1 - drivers/s390/net/qeth_l2_main.c | 1 + drivers/s390/net/qeth_l3_main.c | 1 + 3 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index d8f0c610396ec..a599801d7727f 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2392,7 +2392,6 @@ static void qeth_free_qdio_queues(struct qeth_card *card) return; qeth_free_cq(card); - cancel_delayed_work_sync(&card->buffer_reclaim_work); for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; ++j) { if (card->qdio.in_q->bufs[j].rx_skb) dev_kfree_skb_any(card->qdio.in_q->bufs[j].rx_skb); diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 9972d96820f3f..8fb29371788b5 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -284,6 +284,7 @@ static void qeth_l2_stop_card(struct qeth_card *card) if (card->state == CARD_STATE_SOFTSETUP) { qeth_clear_ipacmd_list(card); qeth_drain_output_queues(card); + cancel_delayed_work_sync(&card->buffer_reclaim_work); card->state = CARD_STATE_DOWN; } diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 317d56647a4a3..82f800d1d7b3a 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -1178,6 +1178,7 @@ static void qeth_l3_stop_card(struct qeth_card *card) qeth_l3_clear_ip_htable(card, 1); qeth_clear_ipacmd_list(card); qeth_drain_output_queues(card); + cancel_delayed_work_sync(&card->buffer_reclaim_work); card->state = CARD_STATE_DOWN; }