Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC updates, mostly refactorings and cleanups of old legacy platforms.

  Major themes this release:

   - Conversion of ixp4xx to a modern platform (drivers, DT, bindings)

   - Moving some of the ep93xx headers around to get it closer to
     multiplatform enabled.

   - Cleanups of Davinci

  This also contains a few patches that were queued up as fixes before
  5.1 but I didn't get sent in before release"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  ARM: debug-ll: add default address for digicolor
  ARM: u300: regulator: add MODULE_LICENSE()
  ARM: ep93xx: move private headers out of mach/*
  ARM: ep93xx: move pinctrl interfaces into include/linux/soc
  ARM: ep93xx: keypad: stop using mach/platform.h
  ARM: ep93xx: move network platform data to separate header
  ARM: stm32: add AMBA support for stm32 family
  MAINTAINERS: update arch/arm/mach-davinci
  ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
  ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
  soc: ixp4xx: qmgr: Add DT probe code
  soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
  soc: ixp4xx: npe: Add DT probe code
  soc: ixp4xx: Add DT bindings for IXP4xx NPE
  soc: ixp4xx: qmgr: Pass resources
  soc: ixp4xx: Remove unused functions
  soc: ixp4xx: Uninline several functions
  soc: ixp4xx: npe: Pass addresses as resources
  ARM: ixp4xx: Turn the QMGR into a platform device
  ARM: ixp4xx: Turn the NPE into a platform device
  ...

Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml

@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/intel-ixp4xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx Device Tree Bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - linksys,nslu2
+          - const: intel,ixp42x
+      - items:
+          - enum:
+              - gateworks,gw2358
+          - const: intel,ixp43x

Documentation/devicetree/bindings/bus/ti-sysc.txt

@@ -94,6 +94,8 @@ Optional properties:
 
 - ti,no-idle-on-init	interconnect target module should not be idled at init
 
+- ti,no-idle		interconnect target module should not be idled
+
 Example: Single instance of MUSB controller on omap4 using interconnect ranges
 using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
 
@@ -131,6 +133,6 @@ using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
 		};
 	};
 
-Note that other SoCs, such as am335x can have multipe child devices. On am335x
+Note that other SoCs, such as am335x can have multiple child devices. On am335x
 there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA
-instance as children of a single interconnet target module.
+instance as children of a single interconnect target module.

Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml

@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/firmware/intel-ixp4xx-network-processing-engine.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx Network Processing Engine
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  On the IXP4xx SoCs, the Network Processing Engine (NPE) is a small
+  processor that can load a firmware to perform offloading of networking
+  and crypto tasks. It also manages the MDIO bus to the ethernet PHYs
+  on the IXP4xx platform. All IXP4xx platforms have three NPEs at
+  consecutive memory locations. They are all included in the same
+  device node since they are not independent of each other.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: intel,ixp4xx-network-processing-engine
+
+  reg:
+    minItems: 3
+    maxItems: 3
+    items:
+      - description: NPE0 register range
+      - description: NPE1 register range
+      - description: NPE2 register range
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    npe@c8006000 {
+         compatible = "intel,ixp4xx-network-processing-engine";
+         reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+    };

Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml

@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt/intel-ixp4xx-interrupt.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx XScale Networking Processors Interrupt Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This interrupt controller is found in the Intel IXP4xx processors.
+  Some processors have 32 interrupts, some have up to 64 interrupts.
+  The exact number of interrupts is determined from the compatible
+  string.
+
+  The distinct IXP4xx families with different interrupt controller
+  variations are IXP42x, IXP43x, IXP45x and IXP46x. Those four
+  families were the only ones to reach the developer and consumer
+  market.
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - intel,ixp42x-interrupt
+        - intel,ixp43x-interrupt
+        - intel,ixp45x-interrupt
+        - intel,ixp46x-interrupt
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+examples:
+  - |
+    intcon: interrupt-controller@c8003000 {
+        compatible = "intel,ixp43x-interrupt";
+        reg = <0xc8003000 0x100>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };

Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml

@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/misc/intel-ixp4xx-ahb-queue-manager.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx AHB Queue Manager
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The IXP4xx AHB Queue Manager maintains queues as circular buffers in
+  an 8KB embedded SRAM along with hardware pointers. It is used by both
+  the XScale processor and the NPEs (Network Processing Units) in the
+  IXP4xx for accelerating queues, especially for networking. Clients pick
+  queues from the queue manager with foo-queue = <&qmgr N> where the
+  &qmgr is a phandle to the queue manager and N is the queue resource
+  number. The queue resources available and their specific purpose
+  on a certain IXP4xx system will vary.
+
+properties:
+  compatible:
+    items:
+      - const: intel,ixp4xx-ahb-queue-manager
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Interrupt for queues 0-31
+      - description: Interrupt for queues 32-63
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    qmgr: queue-manager@60000000 {
+         compatible = "intel,ixp4xx-ahb-queue-manager";
+         reg = <0x60000000 0x4000>;
+         interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
+    };

Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/timer/intel-ixp4xx-timer.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx XScale Networking Processors Timers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: This timer is found in the Intel IXP4xx processors.
+
+properties:
+  compatible:
+    items:
+      - const: intel,ixp4xx-timer
+
+  reg:
+    description: Should contain registers location and length
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Timer 1 interrupt
+      - description: Timer 2 interrupt
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    timer@c8005000 {
+        compatible = "intel,ixp4xx-timer";
+        reg = <0xc8005000 0x100>;
+        interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+    };

MAINTAINERS

@@ -1733,11 +1733,21 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
 ARM/INTEL IXP4XX ARM ARCHITECTURE
+M:	Linus Walleij <linusw@kernel.org>
 M:	Imre Kaloz <kaloz@openwrt.org>
 M:	Krzysztof Halasa <khalasa@piap.pl>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
+F:	Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
+F:	Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
+F:	Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
 F:	arch/arm/mach-ixp4xx/
+F:	drivers/clocksource/timer-ixp4xx.c
+F:	drivers/gpio/gpio-ixp4xx.c
+F:	drivers/irqchip/irq-ixp4xx.c
+F:	include/linux/irqchip/irq-ixp4xx.h
+F:	include/linux/platform_data/timer-ixp4xx.h
 
 ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT
 M:	Jonathan Cameron <jic23@cam.ac.uk>
@@ -2238,6 +2248,7 @@ F:	arch/arm/mach-socfpga/
 F:	arch/arm/boot/dts/socfpga*
 F:	arch/arm/configs/socfpga_defconfig
 F:	arch/arm64/boot/dts/altera/
+F:	arch/arm64/boot/dts/intel/
 W:	http://www.rocketboards.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 
@@ -7990,10 +8001,10 @@ F:	Documentation/media/v4l-drivers/ipu3.rst
 INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
 M:	Krzysztof Halasa <khalasa@piap.pl>
 S:	Maintained
-F:	arch/arm/mach-ixp4xx/include/mach/qmgr.h
-F:	arch/arm/mach-ixp4xx/include/mach/npe.h
-F:	arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
-F:	arch/arm/mach-ixp4xx/ixp4xx_npe.c
+F:	include/linux/soc/ixp4xx/qmgr.h
+F:	include/linux/soc/ixp4xx/npe.h
+F:	drivers/soc/ixp4xx/ixp4xx-qmgr.c
+F:	drivers/soc/ixp4xx/ixp4xx-npe.c
 F:	drivers/net/ethernet/xscale/ixp4xx_eth.c
 F:	drivers/net/wan/ixp4xx_hss.c
 
@@ -15654,7 +15665,7 @@ F:	include/linux/clk/ti.h
 
 TI DAVINCI MACHINE SUPPORT
 M:	Sekhar Nori <nsekhar@ti.com>
-M:	Kevin Hilman <khilman@kernel.org>
+R:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
 S:	Supported

arch/arm/Kconfig

@@ -426,12 +426,15 @@ config ARCH_IXP4XX
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
 	select ARCH_SUPPORTS_BIG_ENDIAN
-	select CLKSRC_MMIO
 	select CPU_XSCALE
 	select DMABOUNCE if PCI
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
+	select GPIO_IXP4XX
 	select GPIOLIB
 	select HAVE_PCI
+	select IXP4XX_IRQ
+	select IXP4XX_TIMER
 	select NEED_MACH_IO_H
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
@@ -897,8 +900,6 @@ config PLAT_PXA
 config PLAT_VERSATILE
 	bool
 
-source "arch/arm/firmware/Kconfig"
-
 source "arch/arm/mm/Kconfig"
 
 config IWMMXT

arch/arm/Kconfig.debug

@@ -1676,6 +1676,7 @@ config DEBUG_UART_PHYS
 	default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1
 	default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
 	default 0xe8008000 if DEBUG_R7S72100_SCIF2
+	default 0xf0000000 if DEBUG_DIGICOLOR_UA0
 	default 0xf0000be0 if ARCH_EBSA110
 	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
@@ -1727,6 +1728,7 @@ config DEBUG_UART_VIRT
 	default 0xe0010fe0 if ARCH_RPC
 	default 0xf0000be0 if ARCH_EBSA110
 	default 0xf0010000 if DEBUG_ASM9260_UART
+	default 0xf0100000 if DEBUG_DIGICOLOR_UA0
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
 	default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
 	default 0xf1000300 if DEBUG_BCM_5301X

arch/arm/Makefile

@@ -290,7 +290,6 @@ core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
 core-y				+= arch/arm/probes/
 core-y				+= arch/arm/net/
 core-y				+= arch/arm/crypto/
-core-y				+= arch/arm/firmware/
 core-y				+= $(machdirs) $(platdirs)
 
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/

arch/arm/boot/dts/Makefile

@@ -229,6 +229,9 @@ dtb-$(CONFIG_ARCH_HIX5HD2) += \
 dtb-$(CONFIG_ARCH_INTEGRATOR) += \
 	integratorap.dtb \
 	integratorcp.dtb
+dtb-$(CONFIG_ARCH_IXP4XX) += \
+	intel-ixp42x-linksys-nslu2.dtb \
+	intel-ixp43x-gateworks-gw2358.dtb
 dtb-$(CONFIG_ARCH_KEYSTONE) += \
 	keystone-k2hk-evm.dtb \
 	keystone-k2l-evm.dtb \

arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi

@@ -88,6 +88,7 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
 		enable-active-high;
 	};
 
@@ -99,6 +100,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
 		enable-active-high;
 		regulator-always-on;
 	};
@@ -216,7 +218,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	phy-supply = <&reg_enet>;

arch/arm/boot/dts/imx6dl-riotboard.dts

@@ -92,7 +92,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/imx6q-ba16.dtsi

@@ -171,7 +171,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6q-marsboard.dts

@@ -110,7 +110,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };