powerpc/mpc85xx: Add TMU device tree support for T1023/T1024

Also add nodes and properties for thermal management support. Meanwhile preprocessor support is needed using thermal of framework. Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Reviewed-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
mariux64 · Dec 24, 2015 · 3045e40 · 3045e40
1 parent be489a3
commit 3045e40
Show file tree

Hide file tree

Showing 6 changed files with 92 additions and 4 deletions.
diff --git a/arch/powerpc/boot/dts/fsl/t1023rdb.dts b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
@@ -159,4 +159,4 @@
 	};
 };
 
-/include/ "t1023si-post.dtsi"
+#include "t1023si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -32,6 +32,8 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include <dt-bindings/thermal/thermal.h>
+
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
@@ -275,6 +277,90 @@
 		reg = <0xea000 0x4000>;
 	};
 
+	tmu: tmu@f0000 {
+		compatible = "fsl,qoriq-tmu";
+		reg = <0xf0000 0x1000>;
+		interrupts = <18 2 0 0>;
+		fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
+		fsl,tmu-calibration = <0x00000000 0x0000000f
+				       0x00000001 0x00000017
+				       0x00000002 0x0000001e
+				       0x00000003 0x00000026
+				       0x00000004 0x0000002e
+				       0x00000005 0x00000035
+				       0x00000006 0x0000003d
+				       0x00000007 0x00000044
+				       0x00000008 0x0000004c
+				       0x00000009 0x00000053
+				       0x0000000a 0x0000005b
+				       0x0000000b 0x00000064
+
+				       0x00010000 0x00000011
+				       0x00010001 0x0000001c
+				       0x00010002 0x00000024
+				       0x00010003 0x0000002b
+				       0x00010004 0x00000034
+				       0x00010005 0x00000039
+				       0x00010006 0x00000042
+				       0x00010007 0x0000004c
+				       0x00010008 0x00000051
+				       0x00010009 0x0000005a
+				       0x0001000a 0x00000063
+
+				       0x00020000 0x00000013
+				       0x00020001 0x00000019
+				       0x00020002 0x00000024
+				       0x00020003 0x0000002c
+				       0x00020004 0x00000035
+				       0x00020005 0x0000003d
+				       0x00020006 0x00000046
+				       0x00020007 0x00000050
+				       0x00020008 0x00000059
+
+				       0x00030000 0x00000002
+				       0x00030001 0x0000000d
+				       0x00030002 0x00000019
+				       0x00030003 0x00000024>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu1 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	scfg: global-utilities@fc000 {
 		compatible = "fsl,t1023-scfg";
 		reg = <0xfc000 0x1000>;

diff --git a/arch/powerpc/boot/dts/fsl/t1024qds.dts b/arch/powerpc/boot/dts/fsl/t1024qds.dts
@@ -248,4 +248,4 @@
 	};
 };
 
-/include/ "t1024si-post.dtsi"
+#include "t1024si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1024rdb.dts b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
@@ -188,4 +188,4 @@
 	};
 };
 
-/include/ "t1024si-post.dtsi"
+#include "t1024si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1024si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1024si-post.dtsi
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "t1023si-post.dtsi"
+#include "t1023si-post.dtsi"
 
 / {
 	aliases {

diff --git a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
@@ -76,6 +76,7 @@
 			reg = <0>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -85,6 +86,7 @@
 			reg = <1>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_2>;
+			#cooling-cells = <2>;
 			L2_2: l2-cache {
 				next-level-cache = <&cpc>;
 			};