From c8084a89bd91b05f51a36bff61f63a94c800b0d6 Mon Sep 17 00:00:00 2001 From: Yu-Chun Lin Date: Sun, 19 Jan 2025 16:43:12 +0800 Subject: [PATCH 01/17] Input: wdt87xx_i2c - fix compiler warning As reported by the kernel test robot, the following warning occur: >> drivers/input/touchscreen/wdt87xx_i2c.c:1166:36: warning: 'wdt87xx_acpi_id' defined but not used [-Wunused-const-variable=] 1166 | static const struct acpi_device_id wdt87xx_acpi_id[] = { | ^~~~~~~~~~~~~~~ The 'wdt87xx_acpi_id' array is only used when CONFIG_ACPI is enabled. Wrapping its definition and 'MODULE_DEVICE_TABLE' in '#ifdef CONFIG_ACPI' prevents a compiler warning when ACPI is disabled. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202501181549.uzdlBwuN-lkp@intel.com/ Signed-off-by: Yu-Chun Lin Link: https://lore.kernel.org/r/20250119084312.1851486-1-eleanor15x@gmail.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wdt87xx_i2c.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c b/drivers/input/touchscreen/wdt87xx_i2c.c index 27941245e962f..88d376090e6e6 100644 --- a/drivers/input/touchscreen/wdt87xx_i2c.c +++ b/drivers/input/touchscreen/wdt87xx_i2c.c @@ -1153,11 +1153,13 @@ static const struct i2c_device_id wdt87xx_dev_id[] = { }; MODULE_DEVICE_TABLE(i2c, wdt87xx_dev_id); +#ifdef CONFIG_ACPI static const struct acpi_device_id wdt87xx_acpi_id[] = { { "WDHT0001", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, wdt87xx_acpi_id); +#endif static struct i2c_driver wdt87xx_driver = { .probe = wdt87xx_ts_probe, From c9ccb88f534ca760d06590b67571c353a2f0cbcd Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Sat, 1 Feb 2025 12:43:24 +0100 Subject: [PATCH 02/17] Input: ads7846 - fix gpiod allocation commit 767d83361aaa ("Input: ads7846 - Convert to use software nodes") has simplified the code but accidentially converted a devm_gpiod_get() to gpiod_get(). This leaves the gpio reserved on module remove and the driver can no longer be loaded again. Fixes: 767d83361aaa ("Input: ads7846 - Convert to use software nodes") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller Link: https://lore.kernel.org/r/6e9b143f19cdfda835711a8a7a3966e5a2494cff.1738410204.git.hns@goldelico.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ads7846.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 066dc04003fa8..67264c5b49cb4 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -1021,7 +1021,7 @@ static int ads7846_setup_pendown(struct spi_device *spi, if (pdata->get_pendown_state) { ts->get_pendown_state = pdata->get_pendown_state; } else { - ts->gpio_pendown = gpiod_get(&spi->dev, "pendown", GPIOD_IN); + ts->gpio_pendown = devm_gpiod_get(&spi->dev, "pendown", GPIOD_IN); if (IS_ERR(ts->gpio_pendown)) { dev_err(&spi->dev, "failed to request pendown GPIO\n"); return PTR_ERR(ts->gpio_pendown); From 36e093c8dcc585d0a9e79a005f721f01f3365eba Mon Sep 17 00:00:00 2001 From: Nilton Perim Neto Date: Mon, 3 Feb 2025 07:13:09 -0800 Subject: [PATCH 03/17] Input: xpad - add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE controllers Add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE to the list of recognized controllers, and update vendor comments to match. Signed-off-by: Nilton Perim Neto Link: https://lore.kernel.org/r/20250122214814.102311-2-niltonperimneto@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 8fe2a51df649e..652afb37bf770 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -376,8 +376,10 @@ static const struct xpad_device { { 0x294b, 0x3404, "Snakebyte GAMEPAD RGB X", 0, XTYPE_XBOXONE }, { 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE }, { 0x2dc8, 0x3106, "8BitDo Ultimate Wireless / Pro 2 Wired Controller", 0, XTYPE_XBOX360 }, + { 0x2dc8, 0x6001, "8BitDo SN30 Pro", 0, XTYPE_XBOX360 }, { 0x2dc8, 0x310a, "8BitDo Ultimate 2C Wireless Controller", 0, XTYPE_XBOX360 }, { 0x2e24, 0x0652, "Hyperkin Duke X-Box One pad", 0, XTYPE_XBOXONE }, + { 0x2e24, 0x1688, "Hyperkin X91 X-Box One pad", 0, XTYPE_XBOXONE }, { 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 }, @@ -389,6 +391,7 @@ static const struct xpad_device { { 0x3285, 0x0646, "Nacon Pro Compact", 0, XTYPE_XBOXONE }, { 0x3285, 0x0663, "Nacon Evol-X", 0, XTYPE_XBOXONE }, { 0x3537, 0x1004, "GameSir T4 Kaleid", 0, XTYPE_XBOX360 }, + { 0x3537, 0x1010, "GameSir G7 SE", 0, XTYPE_XBOXONE }, { 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX }, { 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX }, { 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN } @@ -528,12 +531,12 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOXONE_VENDOR(0x24c6), /* PowerA controllers */ XPAD_XBOX360_VENDOR(0x2563), /* OneXPlayer Gamepad */ XPAD_XBOX360_VENDOR(0x260d), /* Dareu H101 */ - XPAD_XBOXONE_VENDOR(0x294b), /* Snakebyte */ + XPAD_XBOXONE_VENDOR(0x294b), /* Snakebyte */ XPAD_XBOX360_VENDOR(0x2c22), /* Qanba Controllers */ - XPAD_XBOX360_VENDOR(0x2dc8), /* 8BitDo Pro 2 Wired Controller */ - XPAD_XBOXONE_VENDOR(0x2dc8), /* 8BitDo Pro 2 Wired Controller for Xbox */ - XPAD_XBOXONE_VENDOR(0x2e24), /* Hyperkin Duke Xbox One pad */ - XPAD_XBOX360_VENDOR(0x2f24), /* GameSir controllers */ + XPAD_XBOX360_VENDOR(0x2dc8), /* 8BitDo Controllers */ + XPAD_XBOXONE_VENDOR(0x2dc8), /* 8BitDo Controllers */ + XPAD_XBOXONE_VENDOR(0x2e24), /* Hyperkin Controllers */ + XPAD_XBOX360_VENDOR(0x2f24), /* GameSir Controllers */ XPAD_XBOX360_VENDOR(0x31e3), /* Wooting Keyboards */ XPAD_XBOX360_VENDOR(0x3285), /* Nacon GC-100 */ XPAD_XBOXONE_VENDOR(0x3285), /* Nacon Evol-X */ From 3492321e2e60ddfe91aa438bb9ac209016f48f7a Mon Sep 17 00:00:00 2001 From: Pavel Rojtberg Date: Mon, 3 Feb 2025 07:22:27 -0800 Subject: [PATCH 04/17] Input: xpad - add multiple supported devices This is based on multiple commits at https://github.com/paroj/xpad that had bouncing email addresses and were not signed off. Signed-off-by: Pavel Rojtberg Link: https://lore.kernel.org/r/20250123175404.23254-1-rojtberg@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 652afb37bf770..16493235bf9ee 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -140,6 +140,7 @@ static const struct xpad_device { { 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX }, + { 0x044f, 0xd01e, "ThrustMaster, Inc. ESWAP X 2 ELDEN RING EDITION", 0, XTYPE_XBOXONE }, { 0x044f, 0x0f10, "Thrustmaster Modena GT Wheel", 0, XTYPE_XBOX }, { 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 }, { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX }, @@ -177,6 +178,7 @@ static const struct xpad_device { { 0x06a3, 0x0200, "Saitek Racing Wheel", 0, XTYPE_XBOX }, { 0x06a3, 0x0201, "Saitek Adrenalin", 0, XTYPE_XBOX }, { 0x06a3, 0xf51a, "Saitek P3600", 0, XTYPE_XBOX360 }, + { 0x0738, 0x4503, "Mad Catz Racing Wheel", 0, XTYPE_XBOXONE }, { 0x0738, 0x4506, "Mad Catz 4506 Wireless Controller", 0, XTYPE_XBOX }, { 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX }, { 0x0738, 0x4520, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX }, @@ -238,6 +240,7 @@ static const struct xpad_device { { 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0147, "PDP Marvel Xbox One Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x015c, "PDP Xbox One Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, + { 0x0e6f, 0x015d, "PDP Mirror's Edge Official Wired Controller for Xbox One", XTYPE_XBOXONE }, { 0x0e6f, 0x0161, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0162, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0163, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, @@ -276,12 +279,15 @@ static const struct xpad_device { { 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x0f0d, 0x00c5, "Hori Fighting Commander ONE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x0f0d, 0x00dc, "HORIPAD FPS for Nintendo Switch", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x0f0d, 0x0151, "Hori Racing Wheel Overdrive for Xbox Series X", 0, XTYPE_XBOXONE }, + { 0x0f0d, 0x0152, "Hori Racing Wheel Overdrive for Xbox Series X", 0, XTYPE_XBOXONE }, { 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX }, { 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX }, { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX }, { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX }, { 0x1038, 0x1430, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 }, { 0x1038, 0x1431, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 }, + { 0x10f5, 0x7005, "Turtle Beach Recon Controller", 0, XTYPE_XBOXONE }, { 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 }, { 0x11ff, 0x0511, "PXN V900", 0, XTYPE_XBOX360 }, { 0x1209, 0x2882, "Ardwiino Controller", 0, XTYPE_XBOX360 }, @@ -366,6 +372,7 @@ static const struct xpad_device { { 0x24c6, 0x5510, "Hori Fighting Commander ONE (Xbox 360/PC Mode)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE }, { 0x24c6, 0x561a, "PowerA FUSION Controller", 0, XTYPE_XBOXONE }, + { 0x24c6, 0x581a, "ThrustMaster XB1 Classic Controller", 0, XTYPE_XBOXONE }, { 0x24c6, 0x5b00, "ThrustMaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 }, @@ -376,10 +383,12 @@ static const struct xpad_device { { 0x294b, 0x3404, "Snakebyte GAMEPAD RGB X", 0, XTYPE_XBOXONE }, { 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE }, { 0x2dc8, 0x3106, "8BitDo Ultimate Wireless / Pro 2 Wired Controller", 0, XTYPE_XBOX360 }, - { 0x2dc8, 0x6001, "8BitDo SN30 Pro", 0, XTYPE_XBOX360 }, + { 0x2dc8, 0x3109, "8BitDo Ultimate Wireless Bluetooth", 0, XTYPE_XBOX360 }, { 0x2dc8, 0x310a, "8BitDo Ultimate 2C Wireless Controller", 0, XTYPE_XBOX360 }, + { 0x2dc8, 0x6001, "8BitDo SN30 Pro", 0, XTYPE_XBOX360 }, { 0x2e24, 0x0652, "Hyperkin Duke X-Box One pad", 0, XTYPE_XBOXONE }, { 0x2e24, 0x1688, "Hyperkin X91 X-Box One pad", 0, XTYPE_XBOXONE }, + { 0x2e95, 0x0504, "SCUF Gaming Controller", MAP_SELECT_BUTTON, XTYPE_XBOXONE }, { 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 }, @@ -387,12 +396,16 @@ static const struct xpad_device { { 0x31e3, 0x1230, "Wooting Two HE (ARM)", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1300, "Wooting 60HE (AVR)", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1310, "Wooting 60HE (ARM)", 0, XTYPE_XBOX360 }, + { 0x3285, 0x0603, "Nacon Pro Compact controller for Xbox", 0, XTYPE_XBOXONE }, { 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 }, + { 0x3285, 0x0614, "Nacon Pro Compact", 0, XTYPE_XBOXONE }, { 0x3285, 0x0646, "Nacon Pro Compact", 0, XTYPE_XBOXONE }, + { 0x3285, 0x0662, "Nacon Revolution5 Pro", 0, XTYPE_XBOX360 }, { 0x3285, 0x0663, "Nacon Evol-X", 0, XTYPE_XBOXONE }, { 0x3537, 0x1004, "GameSir T4 Kaleid", 0, XTYPE_XBOX360 }, { 0x3537, 0x1010, "GameSir G7 SE", 0, XTYPE_XBOXONE }, { 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX }, + { 0x413d, 0x2104, "Black Shark Green Ghost Gamepad", 0, XTYPE_XBOX360 }, { 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX }, { 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN } }; @@ -491,6 +504,7 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOX360_VENDOR(0x03f0), /* HP HyperX Xbox 360 controllers */ XPAD_XBOXONE_VENDOR(0x03f0), /* HP HyperX Xbox One controllers */ XPAD_XBOX360_VENDOR(0x044f), /* Thrustmaster Xbox 360 controllers */ + XPAD_XBOXONE_VENDOR(0x044f), /* Thrustmaster Xbox One controllers */ XPAD_XBOX360_VENDOR(0x045e), /* Microsoft Xbox 360 controllers */ XPAD_XBOXONE_VENDOR(0x045e), /* Microsoft Xbox One controllers */ XPAD_XBOX360_VENDOR(0x046d), /* Logitech Xbox 360-style controllers */ @@ -537,11 +551,13 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOXONE_VENDOR(0x2dc8), /* 8BitDo Controllers */ XPAD_XBOXONE_VENDOR(0x2e24), /* Hyperkin Controllers */ XPAD_XBOX360_VENDOR(0x2f24), /* GameSir Controllers */ + XPAD_XBOXONE_VENDOR(0x2e95), /* SCUF Gaming Controller */ XPAD_XBOX360_VENDOR(0x31e3), /* Wooting Keyboards */ XPAD_XBOX360_VENDOR(0x3285), /* Nacon GC-100 */ XPAD_XBOXONE_VENDOR(0x3285), /* Nacon Evol-X */ XPAD_XBOX360_VENDOR(0x3537), /* GameSir Controllers */ XPAD_XBOXONE_VENDOR(0x3537), /* GameSir Controllers */ + XPAD_XBOX360_VENDOR(0x413d), /* Black Shark Green Ghost Controller */ { } }; @@ -694,7 +710,9 @@ static const struct xboxone_init_packet xboxone_init_packets[] = { XBOXONE_INIT_PKT(0x045e, 0x0b00, xboxone_s_init), XBOXONE_INIT_PKT(0x045e, 0x0b00, extra_input_packet_init), XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_led_on), + XBOXONE_INIT_PKT(0x20d6, 0xa01a, xboxone_pdp_led_on), XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_auth), + XBOXONE_INIT_PKT(0x20d6, 0xa01a, xboxone_pdp_auth), XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init), XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init), XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init), From f5be37ca2c99fc764408ceeeaf941bea062cdc9b Mon Sep 17 00:00:00 2001 From: Andras Sebok Date: Mon, 24 Feb 2025 10:03:56 +0100 Subject: [PATCH 05/17] dt-bindings: input/touchscreen: imagis: add compatible for ist3038h IST3038H is a touchscreen IC which seems mostly compatible with IST3038C except that it reports a different chip ID value. Signed-off-by: Andras Sebok Link: https://lore.kernel.org/r/20250224090354.102903-4-sebokandris2009@gmail.com Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml index e24cbd9609933..bd8ede3a4ad89 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml @@ -19,6 +19,7 @@ properties: - imagis,ist3038 - imagis,ist3038b - imagis,ist3038c + - imagis,ist3038h reg: maxItems: 1 From 83a4a5a82a154277dfe61d135a445901cd6d0e6f Mon Sep 17 00:00:00 2001 From: Andras Sebok Date: Mon, 24 Feb 2025 10:03:54 +0100 Subject: [PATCH 06/17] Input: imagis - add support for imagis IST3038H Add support for imagis IST3038H, which seems mostly compatible with IST3038C except that it reports a different chip ID value. Tested on samsung,j5y17lte. Signed-off-by: Andras Sebok Link: https://lore.kernel.org/r/20250224090354.102903-2-sebokandris2009@gmail.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/imagis.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/input/touchscreen/imagis.c b/drivers/input/touchscreen/imagis.c index abeae9102323c..3c8bbe284b731 100644 --- a/drivers/input/touchscreen/imagis.c +++ b/drivers/input/touchscreen/imagis.c @@ -22,6 +22,7 @@ #define IST3032C_WHOAMI 0x32c #define IST3038C_WHOAMI 0x38c +#define IST3038H_WHOAMI 0x38d #define IST3038B_REG_CHIPID 0x30 #define IST3038B_WHOAMI 0x30380b @@ -428,11 +429,19 @@ static const struct imagis_properties imagis_3038c_data = { .protocol_b = true, }; +static const struct imagis_properties imagis_3038h_data = { + .interrupt_msg_cmd = IST3038C_REG_INTR_MESSAGE, + .touch_coord_cmd = IST3038C_REG_TOUCH_COORD, + .whoami_cmd = IST3038C_REG_CHIPID, + .whoami_val = IST3038H_WHOAMI, +}; + static const struct of_device_id imagis_of_match[] = { { .compatible = "imagis,ist3032c", .data = &imagis_3032c_data }, { .compatible = "imagis,ist3038", .data = &imagis_3038_data }, { .compatible = "imagis,ist3038b", .data = &imagis_3038b_data }, { .compatible = "imagis,ist3038c", .data = &imagis_3038c_data }, + { .compatible = "imagis,ist3038h", .data = &imagis_3038h_data }, { }, }; MODULE_DEVICE_TABLE(of, imagis_of_match); From 5bab1ae5a375ccde25ac9a142ea933a5d3bdf38d Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Fri, 3 Jan 2025 10:21:35 +0100 Subject: [PATCH 07/17] Input: goodix-berlin - fix comment referencing wrong regulator In the statement above AVDD gets enabled, and not IOVDD, so fix this copy-paste mistake. Fixes: 44362279bdd4 ("Input: add core support for Goodix Berlin Touchscreen IC") Reported-by: Jens Reidel Signed-off-by: Luca Weiss Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-1-b014737b08b2@fairphone.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/goodix_berlin_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/goodix_berlin_core.c b/drivers/input/touchscreen/goodix_berlin_core.c index 3fc03cf0ca23f..e273fb8edc6b9 100644 --- a/drivers/input/touchscreen/goodix_berlin_core.c +++ b/drivers/input/touchscreen/goodix_berlin_core.c @@ -263,7 +263,7 @@ static int goodix_berlin_power_on(struct goodix_berlin_core *cd) goto err_iovdd_disable; } - /* Vendor waits 15ms for IOVDD to settle */ + /* Vendor waits 15ms for AVDD to settle */ usleep_range(15000, 15100); gpiod_set_value_cansleep(cd->reset_gpio, 0); From 3b0011059334a1cf554c2c1f67d7a7b822d8238a Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Fri, 3 Jan 2025 10:21:36 +0100 Subject: [PATCH 08/17] Input: goodix-berlin - fix vddio regulator references As per dt-bindings the property is called vddio-supply, so use the correct name in the driver instead of iovdd. The datasheet also calls the supply 'VDDIO'. Fixes: 44362279bdd4 ("Input: add core support for Goodix Berlin Touchscreen IC") Cc: stable@vger.kernel.org Signed-off-by: Luca Weiss Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-2-b014737b08b2@fairphone.com Signed-off-by: Dmitry Torokhov --- .../input/touchscreen/goodix_berlin_core.c | 24 +++++++++---------- 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/input/touchscreen/goodix_berlin_core.c b/drivers/input/touchscreen/goodix_berlin_core.c index e273fb8edc6b9..7f8cfdd106fae 100644 --- a/drivers/input/touchscreen/goodix_berlin_core.c +++ b/drivers/input/touchscreen/goodix_berlin_core.c @@ -165,7 +165,7 @@ struct goodix_berlin_core { struct device *dev; struct regmap *regmap; struct regulator *avdd; - struct regulator *iovdd; + struct regulator *vddio; struct gpio_desc *reset_gpio; struct touchscreen_properties props; struct goodix_berlin_fw_version fw_version; @@ -248,19 +248,19 @@ static int goodix_berlin_power_on(struct goodix_berlin_core *cd) { int error; - error = regulator_enable(cd->iovdd); + error = regulator_enable(cd->vddio); if (error) { - dev_err(cd->dev, "Failed to enable iovdd: %d\n", error); + dev_err(cd->dev, "Failed to enable vddio: %d\n", error); return error; } - /* Vendor waits 3ms for IOVDD to settle */ + /* Vendor waits 3ms for VDDIO to settle */ usleep_range(3000, 3100); error = regulator_enable(cd->avdd); if (error) { dev_err(cd->dev, "Failed to enable avdd: %d\n", error); - goto err_iovdd_disable; + goto err_vddio_disable; } /* Vendor waits 15ms for AVDD to settle */ @@ -283,8 +283,8 @@ static int goodix_berlin_power_on(struct goodix_berlin_core *cd) err_dev_reset: gpiod_set_value_cansleep(cd->reset_gpio, 1); regulator_disable(cd->avdd); -err_iovdd_disable: - regulator_disable(cd->iovdd); +err_vddio_disable: + regulator_disable(cd->vddio); return error; } @@ -292,7 +292,7 @@ static void goodix_berlin_power_off(struct goodix_berlin_core *cd) { gpiod_set_value_cansleep(cd->reset_gpio, 1); regulator_disable(cd->avdd); - regulator_disable(cd->iovdd); + regulator_disable(cd->vddio); } static int goodix_berlin_read_version(struct goodix_berlin_core *cd) @@ -744,10 +744,10 @@ int goodix_berlin_probe(struct device *dev, int irq, const struct input_id *id, return dev_err_probe(dev, PTR_ERR(cd->avdd), "Failed to request avdd regulator\n"); - cd->iovdd = devm_regulator_get(dev, "iovdd"); - if (IS_ERR(cd->iovdd)) - return dev_err_probe(dev, PTR_ERR(cd->iovdd), - "Failed to request iovdd regulator\n"); + cd->vddio = devm_regulator_get(dev, "vddio"); + if (IS_ERR(cd->vddio)) + return dev_err_probe(dev, PTR_ERR(cd->vddio), + "Failed to request vddio regulator\n"); error = goodix_berlin_power_on(cd); if (error) { From 709329c48214ad2acf12eed1b5c0eb798e40a64c Mon Sep 17 00:00:00 2001 From: Antheas Kapenekakis Date: Mon, 24 Feb 2025 22:59:34 -0800 Subject: [PATCH 09/17] Input: xpad - add support for ZOTAC Gaming Zone ZOTAC Gaming Zone is ZOTAC's 2024 handheld release. As it is common with these handhelds, it uses a hybrid USB device with an xpad endpoint, a keyboard endpoint, and a vendor-specific endpoint for RGB control et al. Signed-off-by: Antheas Kapenekakis Link: https://lore.kernel.org/r/20250222170010.188761-2-lkml@antheas.dev Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 16493235bf9ee..29d7e6eb51cf0 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -349,6 +349,7 @@ static const struct xpad_device { { 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 }, { 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 }, { 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 }, + { 0x1ee9, 0x1590, "ZOTAC Gaming Zone", 0, XTYPE_XBOX360 }, { 0x20d6, 0x2001, "BDA Xbox Series X Wired Controller", 0, XTYPE_XBOXONE }, { 0x20d6, 0x2009, "PowerA Enhanced Wired Controller for Xbox Series X|S", 0, XTYPE_XBOXONE }, { 0x20d6, 0x281f, "PowerA Wired Controller For Xbox 360", 0, XTYPE_XBOX360 }, @@ -538,6 +539,7 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOX360_VENDOR(0x1949), /* Amazon controllers */ XPAD_XBOX360_VENDOR(0x1a86), /* QH Electronics */ XPAD_XBOX360_VENDOR(0x1bad), /* Harmonix Rock Band guitar and drums */ + XPAD_XBOX360_VENDOR(0x1ee9), /* ZOTAC Technology Limited */ XPAD_XBOX360_VENDOR(0x20d6), /* PowerA controllers */ XPAD_XBOXONE_VENDOR(0x20d6), /* PowerA controllers */ XPAD_XBOX360_VENDOR(0x2345), /* Machenike Controllers */ From 95a54a96f657fd069d2a9922b6c2d293a72a001f Mon Sep 17 00:00:00 2001 From: Antheas Kapenekakis Date: Mon, 24 Feb 2025 23:00:29 -0800 Subject: [PATCH 10/17] Input: xpad - add support for TECNO Pocket Go TECNO Pocket Go is a kickstarter handheld by manufacturer TECNO Mobile. It poses a unique feature: it does not have a display. Instead, the handheld is essentially a pc in a controller. As customary, it has an xpad endpoint, a keyboard endpoint, and a vendor endpoint for its vendor software. Signed-off-by: Antheas Kapenekakis Link: https://lore.kernel.org/r/20250222170010.188761-3-lkml@antheas.dev Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 29d7e6eb51cf0..79e1c8f1f99c2 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -382,6 +382,7 @@ static const struct xpad_device { { 0x2563, 0x058d, "OneXPlayer Gamepad", 0, XTYPE_XBOX360 }, { 0x294b, 0x3303, "Snakebyte GAMEPAD BASE X", 0, XTYPE_XBOXONE }, { 0x294b, 0x3404, "Snakebyte GAMEPAD RGB X", 0, XTYPE_XBOXONE }, + { 0x2993, 0x2001, "TECNO Pocket Go", 0, XTYPE_XBOX360 }, { 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE }, { 0x2dc8, 0x3106, "8BitDo Ultimate Wireless / Pro 2 Wired Controller", 0, XTYPE_XBOX360 }, { 0x2dc8, 0x3109, "8BitDo Ultimate Wireless Bluetooth", 0, XTYPE_XBOX360 }, @@ -548,6 +549,7 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOX360_VENDOR(0x2563), /* OneXPlayer Gamepad */ XPAD_XBOX360_VENDOR(0x260d), /* Dareu H101 */ XPAD_XBOXONE_VENDOR(0x294b), /* Snakebyte */ + XPAD_XBOX360_VENDOR(0x2993), /* TECNO Mobile */ XPAD_XBOX360_VENDOR(0x2c22), /* Qanba Controllers */ XPAD_XBOX360_VENDOR(0x2dc8), /* 8BitDo Controllers */ XPAD_XBOXONE_VENDOR(0x2dc8), /* 8BitDo Controllers */ From 659a7614dd72e2835ac0b220c2fa68fabd8d1df9 Mon Sep 17 00:00:00 2001 From: Antheas Kapenekakis Date: Mon, 24 Feb 2025 23:01:55 -0800 Subject: [PATCH 11/17] Input: xpad - rename QH controller to Legion Go S The QH controller is actually the controller of the Legion Go S, with the manufacturer string wch.cn and product name Legion Go S in its USB descriptor. A cursory lookup of the VID reveals the same. Therefore, rename the xpad entries to match. Signed-off-by: Antheas Kapenekakis Link: https://lore.kernel.org/r/20250222170010.188761-4-lkml@antheas.dev Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 79e1c8f1f99c2..c33e6f33265ba 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -312,7 +312,7 @@ static const struct xpad_device { { 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 }, { 0x17ef, 0x6182, "Lenovo Legion Controller for Windows", 0, XTYPE_XBOX360 }, { 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 }, - { 0x1a86, 0xe310, "QH Electronics Controller", 0, XTYPE_XBOX360 }, + { 0x1a86, 0xe310, "Legion Go S", 0, XTYPE_XBOX360 }, { 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 }, { 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, @@ -538,7 +538,7 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */ XPAD_XBOX360_VENDOR(0x17ef), /* Lenovo */ XPAD_XBOX360_VENDOR(0x1949), /* Amazon controllers */ - XPAD_XBOX360_VENDOR(0x1a86), /* QH Electronics */ + XPAD_XBOX360_VENDOR(0x1a86), /* Nanjing Qinheng Microelectronics (WCH) */ XPAD_XBOX360_VENDOR(0x1bad), /* Harmonix Rock Band guitar and drums */ XPAD_XBOX360_VENDOR(0x1ee9), /* ZOTAC Technology Limited */ XPAD_XBOX360_VENDOR(0x20d6), /* PowerA controllers */ From 729d163232971672d0f41b93c02092fb91f0e758 Mon Sep 17 00:00:00 2001 From: Werner Sembach Date: Sat, 22 Feb 2025 00:01:22 +0100 Subject: [PATCH 12/17] Input: i8042 - swap old quirk combination with new quirk for NHxxRZQ Some older Clevo barebones have problems like no or laggy keyboard after resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE quirk. With the old i8042 quirks this devices keyboard is sometimes laggy after resume. With the new quirk this issue doesn't happen. Cc: stable@vger.kernel.org Signed-off-by: Werner Sembach Link: https://lore.kernel.org/r/20250221230137.70292-1-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-acpipnpio.h | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h index 127cfdc8668a0..a764248ea11d3 100644 --- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -1209,18 +1209,10 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) }, { - /* - * Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS makes - * the keyboard very laggy for ~5 seconds after boot and - * sometimes also after resume. - * However both are required for the keyboard to not fail - * completely sometimes after boot or resume. - */ .matches = { DMI_MATCH(DMI_BOARD_NAME, "NHxxRZQ"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { .matches = { From 9ed468e17d5b80e7116fd35842df3648e808ae47 Mon Sep 17 00:00:00 2001 From: Werner Sembach Date: Sat, 22 Feb 2025 00:01:23 +0100 Subject: [PATCH 13/17] Input: i8042 - add required quirks for missing old boardnames Some older Clevo barebones have problems like no or laggy keyboard after resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE quirk. The PB71RD keyboard is sometimes laggy after resume and the PC70DR, PB51RF, P640RE, and PCX0DX_GN20 keyboard is sometimes unresponsive after resume. This quirk fixes that. Cc: stable@vger.kernel.org Signed-off-by: Werner Sembach Link: https://lore.kernel.org/r/20250221230137.70292-2-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-acpipnpio.h | 30 +++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h index a764248ea11d3..57a6eec4c2a5d 100644 --- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -1260,6 +1260,12 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "P640RE"), + }, + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) + }, { /* * This is only a partial board_name and might be followed by @@ -1335,6 +1341,24 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "PB51RF"), + }, + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "PB71RD"), + }, + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "PC70DR"), + }, + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) + }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "PCX0DX"), @@ -1342,6 +1366,12 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "PCX0DX_GN20"), + }, + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) + }, /* See comment on TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU above */ { .matches = { From 75ee4ebebbbe8dc4b55ba37f388924fa96bf1564 Mon Sep 17 00:00:00 2001 From: Werner Sembach Date: Sat, 22 Feb 2025 00:01:24 +0100 Subject: [PATCH 14/17] Input: i8042 - swap old quirk combination with new quirk for several devices Some older Clevo barebones have problems like no or laggy keyboard after resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE quirk. While the old quirk combination did not show negative effects on these devices specifically, the new quirk works just as well and seems more stable in general. Cc: stable@vger.kernel.org Signed-off-by: Werner Sembach Link: https://lore.kernel.org/r/20250221230137.70292-3-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-acpipnpio.h | 40 ++++++++++----------------- 1 file changed, 14 insertions(+), 26 deletions(-) diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h index 57a6eec4c2a5d..9df1ef6032dd0 100644 --- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -1080,16 +1080,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"), DMI_MATCH(DMI_BOARD_NAME, "AURA1501"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"), DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { /* Mivvy M310 */ @@ -1171,8 +1169,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .matches = { DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { .matches = { @@ -1205,8 +1202,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .matches = { DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { .matches = { @@ -1218,8 +1214,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .matches = { DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, /* * At least one modern Clevo barebone has the touchpad connected both @@ -1235,17 +1230,15 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .matches = { DMI_MATCH(DMI_BOARD_NAME, "NS50MU"), }, - .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX | - SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP | - SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_NOAUX | + SERIO_QUIRK_FORCENORESTORE) }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"), }, - .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX | - SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP | - SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_NOAUX | + SERIO_QUIRK_FORCENORESTORE) }, { .matches = { @@ -1319,8 +1312,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "P65_67RS"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { /* @@ -1338,8 +1330,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .matches = { DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { .matches = { @@ -1363,8 +1354,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .matches = { DMI_MATCH(DMI_BOARD_NAME, "PCX0DX"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { .matches = { @@ -1383,15 +1373,13 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .matches = { DMI_MATCH(DMI_BOARD_NAME, "X170SM"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { /* From d85862ccca452eeb19329e9f4f9a6ce1d1e53561 Mon Sep 17 00:00:00 2001 From: Werner Sembach Date: Sat, 22 Feb 2025 00:01:25 +0100 Subject: [PATCH 15/17] Input: i8042 - swap old quirk combination with new quirk for more devices Some older Clevo barebones have problems like no or laggy keyboard after resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE quirk. We could not activly retest these devices because we no longer have them in our archive, but based on the other old Clevo barebones we tested where the new quirk had the same or a better behaviour I think it would be good to apply it on these too. Cc: stable@vger.kernel.org Signed-off-by: Werner Sembach Link: https://lore.kernel.org/r/20250221230137.70292-4-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-acpipnpio.h | 31 +++++++++------------------ 1 file changed, 10 insertions(+), 21 deletions(-) diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h index 9df1ef6032dd0..6ed9fc34948cb 100644 --- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -1157,9 +1157,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { }, /* * A lot of modern Clevo barebones have touchpad and/or keyboard issues - * after suspend fixable with nomux + reset + noloop + nopnp. Luckily, - * none of them have an external PS/2 port so this can safely be set for - * all of them. + * after suspend fixable with the forcenorestore quirk. * Clevo barebones come with board_vendor and/or system_vendor set to * either the very generic string "Notebook" and/or a different value * for each individual reseller. The only somewhat universal way to @@ -1175,22 +1173,19 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .matches = { DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "N140CU"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "N141CU"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { .matches = { @@ -1250,8 +1245,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .matches = { DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { .matches = { @@ -1268,16 +1262,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "P65xH"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { /* Clevo P650RS, 650RP6, Sager NP8152-S, and others */ .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "P65xRP"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { /* @@ -1288,8 +1280,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "P65_P67H"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { /* @@ -1300,8 +1291,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "P65_67RP"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { /* @@ -1323,8 +1313,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "P67xRP"), }, - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE) }, { .matches = { From a2add513311b48cc924a699a8174db2c61ed5e8a Mon Sep 17 00:00:00 2001 From: Jeff LaBundy Date: Sun, 9 Mar 2025 20:29:59 -0500 Subject: [PATCH 16/17] Input: iqs7222 - preserve system status register Some register groups reserve a byte at the end of their continuous address space. Depending on the variant of silicon, this field may share the same memory space as the lower byte of the system status register (0x10). In these cases, caching the reserved byte and writing it later may effectively reset the device depending on what happened in between the read and write operations. Solve this problem by avoiding any access to this last byte within offending register groups. This method replaces a workaround which attempted to write the reserved byte with up-to-date contents, but left a small window in which updates by the device could have been clobbered. Now that the driver does not touch these reserved bytes, the order in which the device's registers are written no longer matters, and they can be written in their natural order. The new method is also much more generic, and can be more easily extended to new variants of silicon with different register maps. As part of this change, the register read and write functions must be gently updated to support byte access instead of word access. Fixes: 2e70ef525b73 ("Input: iqs7222 - acknowledge reset before writing registers") Signed-off-by: Jeff LaBundy Link: https://lore.kernel.org/r/Z85Alw+d9EHKXx2e@nixie71 Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/misc/iqs7222.c | 50 ++++++++++++++++-------------------- 1 file changed, 22 insertions(+), 28 deletions(-) diff --git a/drivers/input/misc/iqs7222.c b/drivers/input/misc/iqs7222.c index 22022d11470db..80b917944b51e 100644 --- a/drivers/input/misc/iqs7222.c +++ b/drivers/input/misc/iqs7222.c @@ -100,11 +100,11 @@ enum iqs7222_reg_key_id { enum iqs7222_reg_grp_id { IQS7222_REG_GRP_STAT, - IQS7222_REG_GRP_FILT, IQS7222_REG_GRP_CYCLE, IQS7222_REG_GRP_GLBL, IQS7222_REG_GRP_BTN, IQS7222_REG_GRP_CHAN, + IQS7222_REG_GRP_FILT, IQS7222_REG_GRP_SLDR, IQS7222_REG_GRP_TPAD, IQS7222_REG_GRP_GPIO, @@ -286,6 +286,7 @@ static const struct iqs7222_event_desc iqs7222_tp_events[] = { struct iqs7222_reg_grp_desc { u16 base; + u16 val_len; int num_row; int num_col; }; @@ -342,6 +343,7 @@ static const struct iqs7222_dev_desc iqs7222_devs[] = { }, [IQS7222_REG_GRP_FILT] = { .base = 0xAC00, + .val_len = 3, .num_row = 1, .num_col = 2, }, @@ -400,6 +402,7 @@ static const struct iqs7222_dev_desc iqs7222_devs[] = { }, [IQS7222_REG_GRP_FILT] = { .base = 0xAC00, + .val_len = 3, .num_row = 1, .num_col = 2, }, @@ -454,6 +457,7 @@ static const struct iqs7222_dev_desc iqs7222_devs[] = { }, [IQS7222_REG_GRP_FILT] = { .base = 0xC400, + .val_len = 3, .num_row = 1, .num_col = 2, }, @@ -496,6 +500,7 @@ static const struct iqs7222_dev_desc iqs7222_devs[] = { }, [IQS7222_REG_GRP_FILT] = { .base = 0xC400, + .val_len = 3, .num_row = 1, .num_col = 2, }, @@ -543,6 +548,7 @@ static const struct iqs7222_dev_desc iqs7222_devs[] = { }, [IQS7222_REG_GRP_FILT] = { .base = 0xAA00, + .val_len = 3, .num_row = 1, .num_col = 2, }, @@ -600,6 +606,7 @@ static const struct iqs7222_dev_desc iqs7222_devs[] = { }, [IQS7222_REG_GRP_FILT] = { .base = 0xAA00, + .val_len = 3, .num_row = 1, .num_col = 2, }, @@ -656,6 +663,7 @@ static const struct iqs7222_dev_desc iqs7222_devs[] = { }, [IQS7222_REG_GRP_FILT] = { .base = 0xAE00, + .val_len = 3, .num_row = 1, .num_col = 2, }, @@ -712,6 +720,7 @@ static const struct iqs7222_dev_desc iqs7222_devs[] = { }, [IQS7222_REG_GRP_FILT] = { .base = 0xAE00, + .val_len = 3, .num_row = 1, .num_col = 2, }, @@ -768,6 +777,7 @@ static const struct iqs7222_dev_desc iqs7222_devs[] = { }, [IQS7222_REG_GRP_FILT] = { .base = 0xAE00, + .val_len = 3, .num_row = 1, .num_col = 2, }, @@ -1604,7 +1614,7 @@ static int iqs7222_force_comms(struct iqs7222_private *iqs7222) } static int iqs7222_read_burst(struct iqs7222_private *iqs7222, - u16 reg, void *val, u16 num_val) + u16 reg, void *val, u16 val_len) { u8 reg_buf[sizeof(__be16)]; int ret, i; @@ -1619,7 +1629,7 @@ static int iqs7222_read_burst(struct iqs7222_private *iqs7222, { .addr = client->addr, .flags = I2C_M_RD, - .len = num_val * sizeof(__le16), + .len = val_len, .buf = (u8 *)val, }, }; @@ -1675,7 +1685,7 @@ static int iqs7222_read_word(struct iqs7222_private *iqs7222, u16 reg, u16 *val) __le16 val_buf; int error; - error = iqs7222_read_burst(iqs7222, reg, &val_buf, 1); + error = iqs7222_read_burst(iqs7222, reg, &val_buf, sizeof(val_buf)); if (error) return error; @@ -1685,10 +1695,9 @@ static int iqs7222_read_word(struct iqs7222_private *iqs7222, u16 reg, u16 *val) } static int iqs7222_write_burst(struct iqs7222_private *iqs7222, - u16 reg, const void *val, u16 num_val) + u16 reg, const void *val, u16 val_len) { int reg_len = reg > U8_MAX ? sizeof(reg) : sizeof(u8); - int val_len = num_val * sizeof(__le16); int msg_len = reg_len + val_len; int ret, i; struct i2c_client *client = iqs7222->client; @@ -1747,7 +1756,7 @@ static int iqs7222_write_word(struct iqs7222_private *iqs7222, u16 reg, u16 val) { __le16 val_buf = cpu_to_le16(val); - return iqs7222_write_burst(iqs7222, reg, &val_buf, 1); + return iqs7222_write_burst(iqs7222, reg, &val_buf, sizeof(val_buf)); } static int iqs7222_ati_trigger(struct iqs7222_private *iqs7222) @@ -1831,30 +1840,14 @@ static int iqs7222_dev_init(struct iqs7222_private *iqs7222, int dir) /* * Acknowledge reset before writing any registers in case the device - * suffers a spurious reset during initialization. Because this step - * may change the reserved fields of the second filter beta register, - * its cache must be updated. - * - * Writing the second filter beta register, in turn, may clobber the - * system status register. As such, the filter beta register pair is - * written first to protect against this hazard. + * suffers a spurious reset during initialization. */ if (dir == WRITE) { - u16 reg = dev_desc->reg_grps[IQS7222_REG_GRP_FILT].base + 1; - u16 filt_setup; - error = iqs7222_write_word(iqs7222, IQS7222_SYS_SETUP, iqs7222->sys_setup[0] | IQS7222_SYS_SETUP_ACK_RESET); if (error) return error; - - error = iqs7222_read_word(iqs7222, reg, &filt_setup); - if (error) - return error; - - iqs7222->filt_setup[1] &= GENMASK(7, 0); - iqs7222->filt_setup[1] |= (filt_setup & ~GENMASK(7, 0)); } /* @@ -1883,6 +1876,7 @@ static int iqs7222_dev_init(struct iqs7222_private *iqs7222, int dir) int num_col = dev_desc->reg_grps[i].num_col; u16 reg = dev_desc->reg_grps[i].base; __le16 *val_buf; + u16 val_len = dev_desc->reg_grps[i].val_len ? : num_col * sizeof(*val_buf); u16 *val; if (!num_col) @@ -1900,7 +1894,7 @@ static int iqs7222_dev_init(struct iqs7222_private *iqs7222, int dir) switch (dir) { case READ: error = iqs7222_read_burst(iqs7222, reg, - val_buf, num_col); + val_buf, val_len); for (k = 0; k < num_col; k++) val[k] = le16_to_cpu(val_buf[k]); break; @@ -1909,7 +1903,7 @@ static int iqs7222_dev_init(struct iqs7222_private *iqs7222, int dir) for (k = 0; k < num_col; k++) val_buf[k] = cpu_to_le16(val[k]); error = iqs7222_write_burst(iqs7222, reg, - val_buf, num_col); + val_buf, val_len); break; default: @@ -1962,7 +1956,7 @@ static int iqs7222_dev_info(struct iqs7222_private *iqs7222) int error, i; error = iqs7222_read_burst(iqs7222, IQS7222_PROD_NUM, dev_id, - ARRAY_SIZE(dev_id)); + sizeof(dev_id)); if (error) return error; @@ -2915,7 +2909,7 @@ static int iqs7222_report(struct iqs7222_private *iqs7222) __le16 status[IQS7222_MAX_COLS_STAT]; error = iqs7222_read_burst(iqs7222, IQS7222_SYS_STATUS, status, - num_stat); + num_stat * sizeof(*status)); if (error) return error; From fd10709e28d2fa9015667aee56d92099fc97aa0d Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Fri, 7 Mar 2025 15:37:32 +0100 Subject: [PATCH 17/17] MAINTAINERS: Remove myself from the goodix touchscreen maintainers Haven't authored any commits to that driver in 10 years, and haven't had supported hardware for nearly as long. Signed-off-by: Bastien Nocera Link: https://lore.kernel.org/r/20250307143740.960328-1-hadess@hadess.net Signed-off-by: Dmitry Torokhov --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index baf0eeb9a3554..ca8945fd98bcd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9729,7 +9729,6 @@ S: Maintained F: drivers/media/usb/go7007/ GOODIX TOUCHSCREEN -M: Bastien Nocera M: Hans de Goede L: linux-input@vger.kernel.org S: Maintained