From 61a1deacc3d4fd3d57d7fda4d935f7f7503e8440 Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Wed, 6 Sep 2023 15:20:12 +0800 Subject: [PATCH 1/7] net: hns3: fix tx timeout issue Currently, the driver knocks the ring doorbell before updating the ring->last_to_use in tx flow. if the hardware transmiting packet and napi poll scheduling are fast enough, it may get the old ring->last_to_use in drivers' napi poll. In this case, the driver will think the tx is not completed, and return directly without clear the flag __QUEUE_STATE_STACK_XOFF, which may cause tx timeout. Fixes: 20d06ca2679c ("net: hns3: optimize the tx clean process") Signed-off-by: Jian Shen Signed-off-by: Jijie Shao Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index eac2d05732415..81947c4e51006 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -2103,8 +2103,12 @@ static void hns3_tx_doorbell(struct hns3_enet_ring *ring, int num, */ if (test_bit(HNS3_NIC_STATE_TX_PUSH_ENABLE, &priv->state) && num && !ring->pending_buf && num <= HNS3_MAX_PUSH_BD_NUM && doorbell) { + /* This smp_store_release() pairs with smp_load_aquire() in + * hns3_nic_reclaim_desc(). Ensure that the BD valid bit + * is updated. + */ + smp_store_release(&ring->last_to_use, ring->next_to_use); hns3_tx_push_bd(ring, num); - WRITE_ONCE(ring->last_to_use, ring->next_to_use); return; } @@ -2115,6 +2119,11 @@ static void hns3_tx_doorbell(struct hns3_enet_ring *ring, int num, return; } + /* This smp_store_release() pairs with smp_load_aquire() in + * hns3_nic_reclaim_desc(). Ensure that the BD valid bit is updated. + */ + smp_store_release(&ring->last_to_use, ring->next_to_use); + if (ring->tqp->mem_base) hns3_tx_mem_doorbell(ring); else @@ -2122,7 +2131,6 @@ static void hns3_tx_doorbell(struct hns3_enet_ring *ring, int num, ring->tqp->io_base + HNS3_RING_TX_RING_TAIL_REG); ring->pending_buf = 0; - WRITE_ONCE(ring->last_to_use, ring->next_to_use); } static void hns3_tsyn(struct net_device *netdev, struct sk_buff *skb, @@ -3563,9 +3571,8 @@ static void hns3_reuse_buffer(struct hns3_enet_ring *ring, int i) static bool hns3_nic_reclaim_desc(struct hns3_enet_ring *ring, int *bytes, int *pkts, int budget) { - /* pair with ring->last_to_use update in hns3_tx_doorbell(), - * smp_store_release() is not used in hns3_tx_doorbell() because - * the doorbell operation already have the needed barrier operation. + /* This smp_load_acquire() pairs with smp_store_release() in + * hns3_tx_doorbell(). */ int ltu = smp_load_acquire(&ring->last_to_use); int ntc = ring->next_to_clean; From dd2bbc2ef69a920d93801321b0b01ac6c4e5cacd Mon Sep 17 00:00:00 2001 From: Jijie Shao Date: Wed, 6 Sep 2023 15:20:13 +0800 Subject: [PATCH 2/7] net: hns3: Support query tx timeout threshold by debugfs support query tx timeout threshold by debugfs Signed-off-by: Jijie Shao Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c index f276b5ecb431f..8086722a56c01 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c @@ -1045,6 +1045,7 @@ hns3_dbg_dev_specs(struct hnae3_handle *h, char *buf, int len, int *pos) struct hnae3_ae_dev *ae_dev = pci_get_drvdata(h->pdev); struct hnae3_dev_specs *dev_specs = &ae_dev->dev_specs; struct hnae3_knic_private_info *kinfo = &h->kinfo; + struct net_device *dev = kinfo->netdev; *pos += scnprintf(buf + *pos, len - *pos, "dev_spec:\n"); *pos += scnprintf(buf + *pos, len - *pos, "MAC entry num: %u\n", @@ -1087,6 +1088,9 @@ hns3_dbg_dev_specs(struct hnae3_handle *h, char *buf, int len, int *pos) dev_specs->mc_mac_size); *pos += scnprintf(buf + *pos, len - *pos, "MAC statistics number: %u\n", dev_specs->mac_stats_num); + *pos += scnprintf(buf + *pos, len - *pos, + "TX timeout threshold: %d seconds\n", + dev->watchdog_timeo / HZ); } static int hns3_dbg_dev_info(struct hnae3_handle *h, char *buf, int len) From efccf655e99b6907ca07a466924e91805892e7d3 Mon Sep 17 00:00:00 2001 From: Hao Chen Date: Wed, 6 Sep 2023 15:20:14 +0800 Subject: [PATCH 3/7] net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read() req1->tcam_data is defined as "u8 tcam_data[8]", and we convert it as (u32 *) without considerring byte order conversion, it may result in printing wrong data for tcam_data. Convert tcam_data to (__le32 *) first to fix it. Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs") Signed-off-by: Hao Chen Signed-off-by: Jijie Shao Signed-off-by: Paolo Abeni --- .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c index f01a7a9ee02ca..ff3f8f424ad90 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c @@ -1519,7 +1519,7 @@ static int hclge_dbg_fd_tcam_read(struct hclge_dev *hdev, bool sel_x, struct hclge_desc desc[3]; int pos = 0; int ret, i; - u32 *req; + __le32 *req; hclge_cmd_setup_basic_desc(&desc[0], HCLGE_OPC_FD_TCAM_OP, true); desc[0].flag |= cpu_to_le16(HCLGE_COMM_CMD_FLAG_NEXT); @@ -1544,22 +1544,22 @@ static int hclge_dbg_fd_tcam_read(struct hclge_dev *hdev, bool sel_x, tcam_msg.loc); /* tcam_data0 ~ tcam_data1 */ - req = (u32 *)req1->tcam_data; + req = (__le32 *)req1->tcam_data; for (i = 0; i < 2; i++) pos += scnprintf(tcam_buf + pos, HCLGE_DBG_TCAM_BUF_SIZE - pos, - "%08x\n", *req++); + "%08x\n", le32_to_cpu(*req++)); /* tcam_data2 ~ tcam_data7 */ - req = (u32 *)req2->tcam_data; + req = (__le32 *)req2->tcam_data; for (i = 0; i < 6; i++) pos += scnprintf(tcam_buf + pos, HCLGE_DBG_TCAM_BUF_SIZE - pos, - "%08x\n", *req++); + "%08x\n", le32_to_cpu(*req++)); /* tcam_data8 ~ tcam_data12 */ - req = (u32 *)req3->tcam_data; + req = (__le32 *)req3->tcam_data; for (i = 0; i < 5; i++) pos += scnprintf(tcam_buf + pos, HCLGE_DBG_TCAM_BUF_SIZE - pos, - "%08x\n", *req++); + "%08x\n", le32_to_cpu(*req++)); return ret; } From c295160b1d95e885f1af4586a221cb221d232d10 Mon Sep 17 00:00:00 2001 From: Hao Chen Date: Wed, 6 Sep 2023 15:20:15 +0800 Subject: [PATCH 4/7] net: hns3: fix debugfs concurrency issue between kfree buffer and read Now in hns3_dbg_uninit(), there may be concurrency between kfree buffer and read, it may result in memory error. Moving debugfs_remove_recursive() in front of kfree buffer to ensure they don't happen at the same time. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Chen Signed-off-by: Jijie Shao Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c index 8086722a56c01..b8508533878be 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c @@ -1415,9 +1415,9 @@ int hns3_dbg_init(struct hnae3_handle *handle) return 0; out: - mutex_destroy(&handle->dbgfs_lock); debugfs_remove_recursive(handle->hnae3_dbgfs); handle->hnae3_dbgfs = NULL; + mutex_destroy(&handle->dbgfs_lock); return ret; } @@ -1425,6 +1425,9 @@ void hns3_dbg_uninit(struct hnae3_handle *handle) { u32 i; + debugfs_remove_recursive(handle->hnae3_dbgfs); + handle->hnae3_dbgfs = NULL; + for (i = 0; i < ARRAY_SIZE(hns3_dbg_cmd); i++) if (handle->dbgfs_buf[i]) { kvfree(handle->dbgfs_buf[i]); @@ -1432,8 +1435,6 @@ void hns3_dbg_uninit(struct hnae3_handle *handle) } mutex_destroy(&handle->dbgfs_lock); - debugfs_remove_recursive(handle->hnae3_dbgfs); - handle->hnae3_dbgfs = NULL; } void hns3_dbg_register_debugfs(const char *debugfs_dir_name) From fa5564945f7d15ae2390b00c08b6abaef0165cda Mon Sep 17 00:00:00 2001 From: Jijie Shao Date: Wed, 6 Sep 2023 15:20:16 +0800 Subject: [PATCH 5/7] net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue We hope that tc qdisc and dcb ets commands can not be used crosswise. If we want to use any of the commands to configure tc, We must use the other command to clear the existing configuration. However, when we configure a single tc with tc qdisc, we can still configure it with dcb ets. Because we use mqprio_active as the tag of tc qdisc configuration, but with dcb ets, we do not check mqprio_active. This patch fix this issue by check mqprio_active before executing the dcb ets command. and add dcb_ets_active to replace HCLGE_FLAG_DCB_ENABLE and HCLGE_FLAG_MQPRIO_ENABLE at the hclge layer, Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Jijie Shao Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 + .../hisilicon/hns3/hns3pf/hclge_dcb.c | 20 +++++-------------- .../hisilicon/hns3/hns3pf/hclge_main.c | 5 +++-- .../hisilicon/hns3/hns3pf/hclge_main.h | 2 -- 4 files changed, 9 insertions(+), 19 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index a4b43bcd2f0c9..aaf1f42624a79 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -814,6 +814,7 @@ struct hnae3_tc_info { u8 max_tc; /* Total number of TCs */ u8 num_tc; /* Total number of enabled TCs */ bool mqprio_active; + bool dcb_ets_active; }; #define HNAE3_MAX_DSCP 64 diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c index fad5a5ff3cda5..b98301e205f7f 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c @@ -259,7 +259,7 @@ static int hclge_ieee_setets(struct hnae3_handle *h, struct ieee_ets *ets) int ret; if (!(hdev->dcbx_cap & DCB_CAP_DCBX_VER_IEEE) || - hdev->flag & HCLGE_FLAG_MQPRIO_ENABLE) + h->kinfo.tc_info.mqprio_active) return -EINVAL; ret = hclge_ets_validate(hdev, ets, &num_tc, &map_changed); @@ -275,10 +275,7 @@ static int hclge_ieee_setets(struct hnae3_handle *h, struct ieee_ets *ets) } hclge_tm_schd_info_update(hdev, num_tc); - if (num_tc > 1) - hdev->flag |= HCLGE_FLAG_DCB_ENABLE; - else - hdev->flag &= ~HCLGE_FLAG_DCB_ENABLE; + h->kinfo.tc_info.dcb_ets_active = num_tc > 1; ret = hclge_ieee_ets_to_tm_info(hdev, ets); if (ret) @@ -487,7 +484,7 @@ static u8 hclge_getdcbx(struct hnae3_handle *h) struct hclge_vport *vport = hclge_get_vport(h); struct hclge_dev *hdev = vport->back; - if (hdev->flag & HCLGE_FLAG_MQPRIO_ENABLE) + if (h->kinfo.tc_info.mqprio_active) return 0; return hdev->dcbx_cap; @@ -611,7 +608,8 @@ static int hclge_setup_tc(struct hnae3_handle *h, if (!test_bit(HCLGE_STATE_NIC_REGISTERED, &hdev->state)) return -EBUSY; - if (hdev->flag & HCLGE_FLAG_DCB_ENABLE) + kinfo = &vport->nic.kinfo; + if (kinfo->tc_info.dcb_ets_active) return -EINVAL; ret = hclge_mqprio_qopt_check(hdev, mqprio_qopt); @@ -625,7 +623,6 @@ static int hclge_setup_tc(struct hnae3_handle *h, if (ret) return ret; - kinfo = &vport->nic.kinfo; memcpy(&old_tc_info, &kinfo->tc_info, sizeof(old_tc_info)); hclge_sync_mqprio_qopt(&kinfo->tc_info, mqprio_qopt); kinfo->tc_info.mqprio_active = tc > 0; @@ -634,13 +631,6 @@ static int hclge_setup_tc(struct hnae3_handle *h, if (ret) goto err_out; - hdev->flag &= ~HCLGE_FLAG_DCB_ENABLE; - - if (tc > 1) - hdev->flag |= HCLGE_FLAG_MQPRIO_ENABLE; - else - hdev->flag &= ~HCLGE_FLAG_MQPRIO_ENABLE; - return hclge_notify_init_up(hdev); err_out: diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 0f50dba6cc478..8ca3684244362 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -11026,6 +11026,7 @@ static void hclge_get_mdix_mode(struct hnae3_handle *handle, static void hclge_info_show(struct hclge_dev *hdev) { + struct hnae3_handle *handle = &hdev->vport->nic; struct device *dev = &hdev->pdev->dev; dev_info(dev, "PF info begin:\n"); @@ -11042,9 +11043,9 @@ static void hclge_info_show(struct hclge_dev *hdev) dev_info(dev, "This is %s PF\n", hdev->flag & HCLGE_FLAG_MAIN ? "main" : "not main"); dev_info(dev, "DCB %s\n", - hdev->flag & HCLGE_FLAG_DCB_ENABLE ? "enable" : "disable"); + handle->kinfo.tc_info.dcb_ets_active ? "enable" : "disable"); dev_info(dev, "MQPRIO %s\n", - hdev->flag & HCLGE_FLAG_MQPRIO_ENABLE ? "enable" : "disable"); + handle->kinfo.tc_info.mqprio_active ? "enable" : "disable"); dev_info(dev, "Default tx spare buffer size: %u\n", hdev->tx_spare_buf_size); diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h index ec233ec57222a..7bc2049b723da 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h @@ -919,8 +919,6 @@ struct hclge_dev { #define HCLGE_FLAG_MAIN BIT(0) #define HCLGE_FLAG_DCB_CAPABLE BIT(1) -#define HCLGE_FLAG_DCB_ENABLE BIT(2) -#define HCLGE_FLAG_MQPRIO_ENABLE BIT(3) u32 flag; u32 pkt_buf_size; /* Total pf buf size for tx/rx */ From 674d9591a32d01df75d6b5fffed4ef942a294376 Mon Sep 17 00:00:00 2001 From: Yisen Zhuang Date: Wed, 6 Sep 2023 15:20:17 +0800 Subject: [PATCH 6/7] net: hns3: fix the port information display when sfp is absent When sfp is absent or unidentified, the port type should be displayed as PORT_OTHERS, rather than PORT_FIBRE. Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type") Signed-off-by: Yisen Zhuang Signed-off-by: Jijie Shao Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c index 36858a72d771e..682239f33082b 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c @@ -773,7 +773,9 @@ static int hns3_get_link_ksettings(struct net_device *netdev, hns3_get_ksettings(h, cmd); break; case HNAE3_MEDIA_TYPE_FIBER: - if (module_type == HNAE3_MODULE_TYPE_CR) + if (module_type == HNAE3_MODULE_TYPE_UNKNOWN) + cmd->base.port = PORT_OTHER; + else if (module_type == HNAE3_MODULE_TYPE_CR) cmd->base.port = PORT_DA; else cmd->base.port = PORT_FIBRE; From 60326634f6c54528778de18bfef1e8a7a93b3771 Mon Sep 17 00:00:00 2001 From: Jie Wang Date: Wed, 6 Sep 2023 15:20:18 +0800 Subject: [PATCH 7/7] net: hns3: remove GSO partial feature bit HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel packets for example NvGRE packets segment offload and checksum offload is already supported. There is no need to keep gso partial feature bit. So this patch removes it. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jie Wang Signed-off-by: Jijie Shao Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 81947c4e51006..b4895c7b3efd1 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -3316,8 +3316,6 @@ static void hns3_set_default_feature(struct net_device *netdev) netdev->priv_flags |= IFF_UNICAST_FLT; - netdev->gso_partial_features |= NETIF_F_GSO_GRE_CSUM; - netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_GSO |