From 58bb90ab415562eededb932455046924e65df342 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= <vincent.stehle@laposte.net>
Date: Sat, 18 Apr 2020 14:35:22 +0200
Subject: [PATCH 1/2] ARM: dts: bcm2835-rpi-zero-w: Fix led polarity
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low.

This has been verified on a board and somewhat confirmed by both the GPIO
name ("STATUS_LED_N") and the reduced schematics [1].

[1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf

Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 4c3f606e5b8d8..f65448c01e317 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -24,7 +24,7 @@
 
 	leds {
 		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
 

From be0ec060b54f0481fb95d59086c1484a949c903c Mon Sep 17 00:00:00 2001
From: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Date: Wed, 20 May 2020 16:30:42 +1200
Subject: [PATCH 2/2] ARM: dts: bcm: HR2: Fix PPI interrupt types

These error messages are output when booting on a BCM HR2 system:
    GIC: PPI11 is secure or misconfigured
    GIC: PPI13 is secure or misconfigured

Per ARM documentation these interrupts are triggered on a rising edge.
See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1,
Section 3.3.8 Interrupt Configuration Registers.

The same issue was resolved for NSP systems in commit 5f1aa51c7a1e
("ARM: dts: NSP: Fix PPI interrupt types").

Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file")
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/boot/dts/bcm-hr2.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index 6142c672811e5..5e5f5ca3c86f1 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -75,7 +75,7 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 
@@ -83,7 +83,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x20600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 
@@ -91,7 +91,7 @@
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0x20620 0x20>;
 			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};