From 376357aca715c27f716844e9825417e12e3b02e7 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Mon, 12 Aug 2019 12:36:55 +0200
Subject: [PATCH] MIPS: ralink: Add GARDENA smart Gateway MT7688 board
This patch adds support for the GARDENA smart Gateway, which is based on
the MediaTek MT7688 SoC. It is equipped with 128 MiB of DDR and 8 MiB of
flash (SPI NOR) and additional 128MiB SPI NAND storage.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Harvey Hunt <harveyhuntnexus@gmail.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
---
.../ralink/gardena_smart_gateway_mt7688.dts | 197 ++++++++++++++++++
1 file changed, 197 insertions(+)
create mode 100644 arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
new file mode 100644
index 0000000000000..aa5caaa311047
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Stefan Roese <sr@denx.de>
+ */
+
+/dts-v1/;
+
+/include/ "mt7628a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "gardena,smart-gateway-mt7688", "ralink,mt7688a-soc",
+ "ralink,mt7628a-soc";
+ model = "GARDENA smart Gateway (MT7688)";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_gpio_gpio>; /* GPIO11 */
+
+ user_btn1 {
+ label = "USER_BTN1";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,code =<KEY_PROG1> ;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_pwm0_gpio>, /* GPIO18 */
+ <&pinmux_pwm1_gpio>, /* GPIO19 */
+ <&pinmux_sdmode_gpio>, /* GPIO22..29 */
+ <&pinmux_p0led_an_gpio>; /* GPIO43 */
+ /*
+ * <&pinmux_i2s_gpio> (covers GPIO0..3) is needed here as
+ * well for GPIO3. But this is already claimed for uart1
+ * (see below). So we can't include it in this LED node.
+ */
+
+ power_blue {
+ label = "smartgw:power:blue";
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ power_green {
+ label = "smartgw:power:green";
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ power_red {
+ label = "smartgw:power:red";
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ radio_blue {
+ label = "smartgw:radio:blue";
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ radio_green {
+ label = "smartgw:radio:green";
+ gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ radio_red {
+ label = "smartgw:radio:red";
+ gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ internet_blue {
+ label = "smartgw:internet:blue";
+ gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ internet_green {
+ label = "smartgw:internet:green";
+ gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ internet_red {
+ label = "smartgw:internet:red";
+ gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ ethernet_link {
+ label = "smartgw:eth:link";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "netdev";
+ };
+
+ ethernet_activity {
+ label = "smartgw:eth:act";
+ gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "netdev";
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+};
+
+&i2c {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_spi_spi>, <&pinmux_spi_cs1_cs>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0xa0000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "uboot_env0";
+ reg = <0xa0000 0x10000>;
+ };
+
+ partition@b0000 {
+ label = "uboot_env1";
+ reg = <0xb0000 0x10000>;
+ };
+
+ factory: partition@c0000 {
+ label = "factory";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+
+ nand_flash@1 {
+ compatible = "spi-nand";
+ linux,mtd-name = "gd5f";
+ reg = <1>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_i2s_gpio>; /* GPIO0..3 */
+
+ rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+};
+
+&uart2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_p2led_an_gpio>, /* GPIO41 */
+ <&pinmux_p3led_an_gpio>; /* GPIO40 */
+
+ rts-gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
+
+&watchdog {
+ status = "okay";
+};