diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt deleted file mode 100644 index cb12f33a247f5..0000000000000 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ /dev/null @@ -1,300 +0,0 @@ -NVIDIA Tegra Power Management Controller (PMC) - -== Power Management Controller Node == - -The PMC block interacts with an external Power Management Unit. The PMC -mostly controls the entry and exit of the system from different sleep -modes. It provides power-gating controllers for SoC and CPU power-islands. - -Required properties: -- name : Should be pmc -- compatible : Should contain one of the following: - For Tegra20 must contain "nvidia,tegra20-pmc". - For Tegra30 must contain "nvidia,tegra30-pmc". - For Tegra114 must contain "nvidia,tegra114-pmc" - For Tegra124 must contain "nvidia,tegra124-pmc" - For Tegra132 must contain "nvidia,tegra124-pmc" - For Tegra210 must contain "nvidia,tegra210-pmc" -- reg : Offset and length of the register set for the device -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - "pclk" (The Tegra clock of that name), - "clk32k_in" (The 32KHz clock input to Tegra). - -Optional properties: -- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal. - The PMU is an external Power Management Unit, whose interrupt output - signal is fed into the PMC. This signal is optionally inverted, and then - fed into the ARM GIC. The PMC is not involved in the detection or - handling of this interrupt signal, merely its inversion. -- nvidia,suspend-mode : The suspend mode that the platform should use. - Valid values are 0, 1 and 2: - 0 (LP0): CPU + Core voltage off and DRAM in self-refresh - 1 (LP1): CPU voltage off and DRAM in self-refresh - 2 (LP2): CPU voltage off -- nvidia,core-power-req-active-high : Boolean, core power request active-high -- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high -- nvidia,combined-power-req : Boolean, combined power request for CPU & Core -- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC) - is enabled. - -Required properties when nvidia,suspend-mode is specified: -- nvidia,cpu-pwr-good-time : CPU power good time in uS. -- nvidia,cpu-pwr-off-time : CPU power off time in uS. -- nvidia,core-pwr-good-time : - Core power good time in uS. -- nvidia,core-pwr-off-time : Core power off time in uS. - -Required properties when nvidia,suspend-mode=<0>: -- nvidia,lp0-vec : Starting address and length of LP0 vector - The LP0 vector contains the warm boot code that is executed by AVP when - resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7 - processor and always being the first boot processor when chip is power on - or resume from deep sleep mode. When the system is resumed from the deep - sleep mode, the warm boot code will restore some PLLs, clocks and then - bring up CPU0 for resuming the system. - -Hardware-triggered thermal reset: -On Tegra30, Tegra114 and Tegra124, if the 'i2c-thermtrip' subnode exists, -hardware-triggered thermal reset will be enabled. - -Required properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'): -- nvidia,i2c-controller-id : ID of I2C controller to send poweroff command to. Valid values are - described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" of the - Tegra K1 Technical Reference Manual. -- nvidia,bus-addr : Bus address of the PMU on the I2C bus -- nvidia,reg-addr : I2C register address to write poweroff command to -- nvidia,reg-data : Poweroff command to write to PMU - -Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'): -- nvidia,pinmux-id : Pinmux used by the hardware when issuing poweroff command. - Defaults to 0. Valid values are described in section 12.5.2 - "Pinmux Support" of the Tegra4 Technical Reference Manual. - -Optional nodes: -- powergates : This node contains a hierarchy of power domain nodes, which - should match the powergates on the Tegra SoC. See "Powergate - Nodes" below. - -Example: - -/ SoC dts including file -pmc@7000f400 { - compatible = "nvidia,tegra20-pmc"; - reg = <0x7000e400 0x400>; - clocks = <&tegra_car 110>, <&clk32k_in>; - clock-names = "pclk", "clk32k_in"; - nvidia,invert-interrupt; - nvidia,suspend-mode = <1>; - nvidia,cpu-pwr-good-time = <2000>; - nvidia,cpu-pwr-off-time = <100>; - nvidia,core-pwr-good-time = <3845 3845>; - nvidia,core-pwr-off-time = <458>; - nvidia,core-power-req-active-high; - nvidia,sys-clock-req-active-high; - nvidia,lp0-vec = <0xbdffd000 0x2000>; -}; - -/ Tegra board dts file -{ - ... - pmc@7000f400 { - i2c-thermtrip { - nvidia,i2c-controller-id = <4>; - nvidia,bus-addr = <0x40>; - nvidia,reg-addr = <0x36>; - nvidia,reg-data = <0x2>; - }; - }; - ... - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - ... -}; - - -== Powergate Nodes == - -Each of the powergate nodes represents a power-domain on the Tegra SoC -that can be power-gated by the Tegra PMC. The name of the powergate node -should be one of the below. Note that not every powergate is applicable -to all Tegra devices and the following list shows which powergates are -applicable to which devices. Please refer to the Tegra TRM for more -details on the various powergates. - - Name Description Devices Applicable - 3d 3D Graphics Tegra20/114/124/210 - 3d0 3D Graphics 0 Tegra30 - 3d1 3D Graphics 1 Tegra30 - aud Audio Tegra210 - dfd Debug Tegra210 - dis Display A Tegra114/124/210 - disb Display B Tegra114/124/210 - heg 2D Graphics Tegra30/114/124/210 - iram Internal RAM Tegra124/210 - mpe MPEG Encode All - nvdec NVIDIA Video Decode Engine Tegra210 - nvjpg NVIDIA JPEG Engine Tegra210 - pcie PCIE Tegra20/30/124/210 - sata SATA Tegra30/124/210 - sor Display interfaces Tegra124/210 - ve2 Video Encode Engine 2 Tegra210 - venc Video Encode Engine All - vdec Video Decode Engine Tegra20/30/114/124 - vic Video Imaging Compositor Tegra124/210 - xusba USB Partition A Tegra114/124/210 - xusbb USB Partition B Tegra114/124/210 - xusbc USB Partition C Tegra114/124/210 - -Required properties: - - clocks: Must contain an entry for each clock required by the PMC for - controlling a power-gate. See ../clocks/clock-bindings.txt for details. - - resets: Must contain an entry for each reset required by the PMC for - controlling a power-gate. See ../reset/reset.txt for details. - - #power-domain-cells: Must be 0. - -Example: - - pmc: pmc@7000e400 { - compatible = "nvidia,tegra210-pmc"; - reg = <0x0 0x7000e400 0x0 0x400>; - clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; - clock-names = "pclk", "clk32k_in"; - - powergates { - pd_audio: aud { - clocks = <&tegra_car TEGRA210_CLK_APE>, - <&tegra_car TEGRA210_CLK_APB2APE>; - resets = <&tegra_car 198>; - #power-domain-cells = <0>; - }; - }; - }; - - -== Powergate Clients == - -Hardware blocks belonging to a power domain should contain a "power-domains" -property that is a phandle pointing to the corresponding powergate node. - -Example: - - adma: adma@702e2000 { - ... - power-domains = <&pd_audio>; - ... - }; - -== Pad Control == - -On Tegra SoCs a pad is a set of pins which are configured as a group. -The pin grouping is a fixed attribute of the hardware. The PMC can be -used to set pad power state and signaling voltage. A pad can be either -in active or power down mode. The support for power state and signaling -voltage configuration varies depending on the pad in question. 3.3 V and -1.8 V signaling voltages are supported on pins where software -controllable signaling voltage switching is available. - -The pad configuration state nodes are placed under the pmc node and they -are referred to by the pinctrl client properties. For more information -see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. -The pad name should be used as the value of the pins property in pin -configuration nodes. - -The following pads are present on Tegra124 and Tegra132: -audio bb cam comp -csia csb cse dsi -dsib dsic dsid hdmi -hsic hv lvds mipi-bias -nand pex-bias pex-clk1 pex-clk2 -pex-cntrl sdmmc1 sdmmc3 sdmmc4 -sys_ddc uart usb0 usb1 -usb2 usb_bias - -The following pads are present on Tegra210: -audio audio-hv cam csia -csib csic csid csie -csif dbg debug-nonao dmic -dp dsi dsib dsic -dsid emmc emmc2 gpio -hdmi hsic lvds mipi-bias -pex-bias pex-clk1 pex-clk2 pex-cntrl -sdmmc1 sdmmc3 spi spi-hv -uart usb0 usb1 usb2 -usb3 usb-bias - -Required pin configuration properties: - - pins: Must contain name of the pad(s) to be configured. - -Optional pin configuration properties: - - low-power-enable: Configure the pad into power down mode - - low-power-disable: Configure the pad into active mode - - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 - or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. - The values are defined in - include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. - -Note: The power state can be configured on all of the Tegra124 and - Tegra132 pads. None of the Tegra124 or Tegra132 pads support - signaling voltage switching. - -Note: All of the listed Tegra210 pads except pex-cntrl support power - state configuration. Signaling voltage switching is supported on - following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio, - pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart. - -Pad configuration state example: - pmc: pmc@7000e400 { - compatible = "nvidia,tegra210-pmc"; - reg = <0x0 0x7000e400 0x0 0x400>; - clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; - clock-names = "pclk", "clk32k_in"; - - ... - - sdmmc1_3v3: sdmmc1-3v3 { - pins = "sdmmc1"; - power-source = ; - }; - - sdmmc1_1v8: sdmmc1-1v8 { - pins = "sdmmc1"; - power-source = ; - }; - - hdmi_off: hdmi-off { - pins = "hdmi"; - low-power-enable; - } - - hdmi_on: hdmi-on { - pins = "hdmi"; - low-power-disable; - } - }; - -Pinctrl client example: - sdmmc1: sdhci@700b0000 { - ... - pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; - pinctrl-0 = <&sdmmc1_3v3>; - pinctrl-1 = <&sdmmc1_1v8>; - }; - ... - sor@54540000 { - ... - pinctrl-0 = <&hdmi_off>; - pinctrl-1 = <&hdmi_on>; - pinctrl-names = "hdmi-on", "hdmi-off"; - }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml new file mode 100644 index 0000000000000..f17bb353f65ea --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -0,0 +1,354 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra Power Management Controller (PMC) + +maintainers: + - Thierry Reding + - Jonathan Hunter + +properties: + compatible: + enum: + - nvidia,tegra20-pmc + - nvidia,tegra20-pmc + - nvidia,tegra30-pmc + - nvidia,tegra114-pmc + - nvidia,tegra124-pmc + - nvidia,tegra210-pmc + + reg: + maxItems: 1 + description: + Offset and length of the register set for the device. + + clock-names: + items: + - const: pclk + - const: clk32k_in + description: + Must includes entries pclk and clk32k_in. + pclk is the Tegra clock of that name and clk32k_in is 32KHz clock + input to Tegra. + + clocks: + maxItems: 2 + description: + Must contain an entry for each entry in clock-names. + See ../clocks/clocks-bindings.txt for details. + + '#clock-cells': + const: 1 + description: + Tegra PMC has clk_out_1, clk_out_2, and clk_out_3. + PMC also has blink control which allows 32Khz clock output to + Tegra blink pad. + Consumer of PMC clock should specify the desired clock by having + the clock ID in its "clocks" phandle cell with pmc clock provider. + See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC + clock IDs. + + '#interrupt-cells': + const: 2 + description: + Specifies number of cells needed to encode an interrupt source. + The value must be 2. + + interrupt-controller: true + + nvidia,invert-interrupt: + $ref: /schemas/types.yaml#/definitions/flag + description: Inverts the PMU interrupt signal. + The PMU is an external Power Management Unit, whose interrupt output + signal is fed into the PMC. This signal is optionally inverted, and + then fed into the ARM GIC. The PMC is not involved in the detection + or handling of this interrupt signal, merely its inversion. + + nvidia,core-power-req-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: Core power request active-high. + + nvidia,sys-clock-req-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: System clock request active-high. + + nvidia,combined-power-req: + $ref: /schemas/types.yaml#/definitions/flag + description: combined power request for CPU and Core. + + nvidia,cpu-pwr-good-en: + $ref: /schemas/types.yaml#/definitions/flag + description: + CPU power good signal from external PMIC to PMC is enabled. + + nvidia,suspend-mode: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 2] + description: + The suspend mode that the platform should use. + Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh + Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh + Mode 2 is for LP2, CPU voltage off + + nvidia,cpu-pwr-good-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU power good time in uSec. + + nvidia,cpu-pwr-off-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU power off time in uSec. + + nvidia,core-pwr-good-time: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + + Core power good time in uSec. + + nvidia,core-pwr-off-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Core power off time in uSec. + + nvidia,lp0-vec: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Starting address and length of LP0 vector. + The LP0 vector contains the warm boot code that is executed + by AVP when resuming from the LP0 state. + The AVP (Audio-Video Processor) is an ARM7 processor and + always being the first boot processor when chip is power on + or resume from deep sleep mode. When the system is resumed + from the deep sleep mode, the warm boot code will restore + some PLLs, clocks and then brings up CPU0 for resuming the + system. + + i2c-thermtrip: + type: object + description: + On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists, + hardware-triggered thermal reset will be enabled. + + properties: + nvidia,i2c-controller-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + ID of I2C controller to send poweroff command to PMU. + Valid values are described in section 9.2.148 + "APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference + Manual. + + nvidia,bus-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Bus address of the PMU on the I2C bus. + + nvidia,reg-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: PMU I2C register address to issue poweroff command. + + nvidia,reg-data: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Poweroff command to write to PMU. + + nvidia,pinmux-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Pinmux used by the hardware when issuing Poweroff command. + Defaults to 0. Valid values are described in section 12.5.2 + "Pinmux Support" of the Tegra4 Technical Reference Manual. + + required: + - nvidia,i2c-controller-id + - nvidia,bus-addr + - nvidia,reg-addr + - nvidia,reg-data + + additionalProperties: false + + powergates: + type: object + description: | + This node contains a hierarchy of power domain nodes, which should + match the powergates on the Tegra SoC. Each powergate node + represents a power-domain on the Tegra SoC that can be power-gated + by the Tegra PMC. + Hardware blocks belonging to a power domain should contain + "power-domains" property that is a phandle pointing to corresponding + powergate node. + The name of the powergate node should be one of the below. Note that + not every powergate is applicable to all Tegra devices and the following + list shows which powergates are applicable to which devices. + Please refer to Tegra TRM for mode details on the powergate nodes to + use for each power-gate block inside Tegra. + Name Description Devices Applicable + 3d 3D Graphics Tegra20/114/124/210 + 3d0 3D Graphics 0 Tegra30 + 3d1 3D Graphics 1 Tegra30 + aud Audio Tegra210 + dfd Debug Tegra210 + dis Display A Tegra114/124/210 + disb Display B Tegra114/124/210 + heg 2D Graphics Tegra30/114/124/210 + iram Internal RAM Tegra124/210 + mpe MPEG Encode All + nvdec NVIDIA Video Decode Engine Tegra210 + nvjpg NVIDIA JPEG Engine Tegra210 + pcie PCIE Tegra20/30/124/210 + sata SATA Tegra30/124/210 + sor Display interfaces Tegra124/210 + ve2 Video Encode Engine 2 Tegra210 + venc Video Encode Engine All + vdec Video Decode Engine Tegra20/30/114/124 + vic Video Imaging Compositor Tegra124/210 + xusba USB Partition A Tegra114/124/210 + xusbb USB Partition B Tegra114/124/210 + xusbc USB Partition C Tegra114/124/210 + + patternProperties: + "^[a-z0-9]+$": + type: object + + patternProperties: + clocks: + minItems: 1 + maxItems: 8 + description: + Must contain an entry for each clock required by the PMC + for controlling a power-gate. + See ../clocks/clock-bindings.txt document for more details. + + resets: + minItems: 1 + maxItems: 8 + description: + Must contain an entry for each reset required by the PMC + for controlling a power-gate. + See ../reset/reset.txt for more details. + + '#power-domain-cells': + const: 0 + description: Must be 0. + + required: + - clocks + - resets + - '#power-domain-cells' + + additionalProperties: false + +patternProperties: + "^[a-f0-9]+-[a-f0-9]+$": + type: object + description: + This is a Pad configuration node. On Tegra SOCs a pad is a set of + pins which are configured as a group. The pin grouping is a fixed + attribute of the hardware. The PMC can be used to set pad power state + and signaling voltage. A pad can be either in active or power down mode. + The support for power state and signaling voltage configuration varies + depending on the pad in question. 3.3V and 1.8V signaling voltages + are supported on pins where software controllable signaling voltage + switching is available. + + The pad configuration state nodes are placed under the pmc node and they + are referred to by the pinctrl client properties. For more information + see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. + The pad name should be used as the value of the pins property in pin + configuration nodes. + + The following pads are present on Tegra124 and Tegra132 + audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, hsic, + hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, pex-cntrl, + sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, usb_bias. + + The following pads are present on Tegra210 + audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg, + debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, hdmi, + hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1, + sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias. + + properties: + pins: + $ref: /schemas/types.yaml#/definitions/string + description: Must contain name of the pad(s) to be configured. + + low-power-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: Configure the pad into power down mode. + + low-power-disable: + $ref: /schemas/types.yaml#/definitions/flag + description: Configure the pad into active mode. + + power-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or + TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. + The values are defined in + include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. + Power state can be configured on all Tegra124 and Tegra132 + pads. None of the Tegra124 or Tegra132 pads support signaling + voltage switching. + All of the listed Tegra210 pads except pex-cntrl support power + state configuration. Signaling voltage switching is supported + on below Tegra210 pads. + audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1, + sdmmc3, spi, spi-hv, and uart. + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + - clock-names + - clocks + - '#clock-cells' + +dependencies: + "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] + "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] + "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"] + +examples: + - | + + #include + #include + #include + + tegra_pmc: pmc@7000e400 { + compatible = "nvidia,tegra210-pmc"; + reg = <0x0 0x7000e400 0x0 0x400>; + clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; + + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + + powergates { + pd_audio: aud { + clocks = <&tegra_car TEGRA210_CLK_APE>, + <&tegra_car TEGRA210_CLK_APB2APE>; + resets = <&tegra_car 198>; + #power-domain-cells = <0>; + }; + + pd_xusbss: xusba { + clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>; + resets = <&tegra_car TEGRA210_CLK_XUSB_SS>; + #power-domain-cells = <0>; + }; + }; + }; diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile index df966ca06788e..1f7c30f87ece4 100644 --- a/drivers/clk/tegra/Makefile +++ b/drivers/clk/tegra/Makefile @@ -12,7 +12,6 @@ obj-y += clk-sdmmc-mux.o obj-y += clk-super.o obj-y += clk-tegra-audio.o obj-y += clk-tegra-periph.o -obj-y += clk-tegra-pmc.o obj-y += clk-tegra-fixed.o obj-y += clk-tegra-super-gen4.o obj-$(CONFIG_TEGRA_CLK_EMC) += clk-emc.o diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h index c4faebd327607..ff7da2d3e94d8 100644 --- a/drivers/clk/tegra/clk-id.h +++ b/drivers/clk/tegra/clk-id.h @@ -32,7 +32,6 @@ enum clk_id { tegra_clk_audio4, tegra_clk_audio4_2x, tegra_clk_audio4_mux, - tegra_clk_blink, tegra_clk_bsea, tegra_clk_bsev, tegra_clk_cclk_g, @@ -44,14 +43,9 @@ enum clk_id { tegra_clk_clk72Mhz, tegra_clk_clk72Mhz_8, tegra_clk_clk_m, - tegra_clk_clk_m_div2, - tegra_clk_clk_m_div4, - tegra_clk_clk_out_1, - tegra_clk_clk_out_1_mux, - tegra_clk_clk_out_2, - tegra_clk_clk_out_2_mux, - tegra_clk_clk_out_3, - tegra_clk_clk_out_3_mux, + tegra_clk_osc, + tegra_clk_osc_div2, + tegra_clk_osc_div4, tegra_clk_cml0, tegra_clk_cml1, tegra_clk_csi, diff --git a/drivers/clk/tegra/clk-tegra-fixed.c b/drivers/clk/tegra/clk-tegra-fixed.c index 7c6c8abfcde65..77c22cef5014d 100644 --- a/drivers/clk/tegra/clk-tegra-fixed.c +++ b/drivers/clk/tegra/clk-tegra-fixed.c @@ -46,7 +46,28 @@ int __init tegra_osc_clk_init(void __iomem *clk_base, struct tegra_clk *clks, return -EINVAL; } + dt_clk = tegra_lookup_dt_id(tegra_clk_osc, clks); + if (!dt_clk) + return 0; + osc = clk_register_fixed_rate(NULL, "osc", NULL, 0, *osc_freq); + *dt_clk = osc; + + /* osc_div2 */ + dt_clk = tegra_lookup_dt_id(tegra_clk_osc_div2, clks); + if (dt_clk) { + clk = clk_register_fixed_factor(NULL, "osc_div2", "osc", + 0, 1, 2); + *dt_clk = clk; + } + + /* osc_div4 */ + dt_clk = tegra_lookup_dt_id(tegra_clk_osc_div4, clks); + if (dt_clk) { + clk = clk_register_fixed_factor(NULL, "osc_div4", "osc", + 0, 1, 4); + *dt_clk = clk; + } dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m, clks); if (!dt_clk) @@ -84,22 +105,6 @@ void __init tegra_fixed_clk_init(struct tegra_clk *tegra_clks) clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, 0, 32768); *dt_clk = clk; } - - /* clk_m_div2 */ - dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m_div2, tegra_clks); - if (dt_clk) { - clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m", - CLK_SET_RATE_PARENT, 1, 2); - *dt_clk = clk; - } - - /* clk_m_div4 */ - dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m_div4, tegra_clks); - if (dt_clk) { - clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m", - CLK_SET_RATE_PARENT, 1, 4); - *dt_clk = clk; - } } void tegra_clk_osc_resume(void __iomem *clk_base) diff --git a/drivers/clk/tegra/clk-tegra-pmc.c b/drivers/clk/tegra/clk-tegra-pmc.c deleted file mode 100644 index bec3e008335f3..0000000000000 --- a/drivers/clk/tegra/clk-tegra-pmc.c +++ /dev/null @@ -1,122 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "clk.h" -#include "clk-id.h" - -#define PMC_CLK_OUT_CNTRL 0x1a8 -#define PMC_DPD_PADS_ORIDE 0x1c -#define PMC_DPD_PADS_ORIDE_BLINK_ENB 20 -#define PMC_CTRL 0 -#define PMC_CTRL_BLINK_ENB 7 -#define PMC_BLINK_TIMER 0x40 - -struct pmc_clk_init_data { - char *mux_name; - char *gate_name; - const char **parents; - int num_parents; - int mux_id; - int gate_id; - char *dev_name; - u8 mux_shift; - u8 gate_shift; -}; - -#define PMC_CLK(_num, _mux_shift, _gate_shift)\ - {\ - .mux_name = "clk_out_" #_num "_mux",\ - .gate_name = "clk_out_" #_num,\ - .parents = clk_out ##_num ##_parents,\ - .num_parents = ARRAY_SIZE(clk_out ##_num ##_parents),\ - .mux_id = tegra_clk_clk_out_ ##_num ##_mux,\ - .gate_id = tegra_clk_clk_out_ ##_num,\ - .dev_name = "extern" #_num,\ - .mux_shift = _mux_shift,\ - .gate_shift = _gate_shift,\ - } - -static DEFINE_SPINLOCK(clk_out_lock); - -static const char *clk_out1_parents[] = { "clk_m", "clk_m_div2", - "clk_m_div4", "extern1", -}; - -static const char *clk_out2_parents[] = { "clk_m", "clk_m_div2", - "clk_m_div4", "extern2", -}; - -static const char *clk_out3_parents[] = { "clk_m", "clk_m_div2", - "clk_m_div4", "extern3", -}; - -static struct pmc_clk_init_data pmc_clks[] = { - PMC_CLK(1, 6, 2), - PMC_CLK(2, 14, 10), - PMC_CLK(3, 22, 18), -}; - -void __init tegra_pmc_clk_init(void __iomem *pmc_base, - struct tegra_clk *tegra_clks) -{ - struct clk *clk; - struct clk **dt_clk; - int i; - - for (i = 0; i < ARRAY_SIZE(pmc_clks); i++) { - struct pmc_clk_init_data *data; - - data = pmc_clks + i; - - dt_clk = tegra_lookup_dt_id(data->mux_id, tegra_clks); - if (!dt_clk) - continue; - - clk = clk_register_mux(NULL, data->mux_name, data->parents, - data->num_parents, - CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT, - pmc_base + PMC_CLK_OUT_CNTRL, data->mux_shift, - 3, 0, &clk_out_lock); - *dt_clk = clk; - - - dt_clk = tegra_lookup_dt_id(data->gate_id, tegra_clks); - if (!dt_clk) - continue; - - clk = clk_register_gate(NULL, data->gate_name, data->mux_name, - CLK_SET_RATE_PARENT, - pmc_base + PMC_CLK_OUT_CNTRL, - data->gate_shift, 0, &clk_out_lock); - *dt_clk = clk; - clk_register_clkdev(clk, data->dev_name, data->gate_name); - } - - /* blink */ - writel_relaxed(0, pmc_base + PMC_BLINK_TIMER); - clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0, - pmc_base + PMC_DPD_PADS_ORIDE, - PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL); - - dt_clk = tegra_lookup_dt_id(tegra_clk_blink, tegra_clks); - if (!dt_clk) - return; - - clk = clk_register_gate(NULL, "blink", "blink_override", 0, - pmc_base + PMC_CTRL, - PMC_CTRL_BLINK_ENB, 0, NULL); - clk_register_clkdev(clk, "blink", NULL); - *dt_clk = clk; -} - diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c index 4efcaaf51b3ac..bc9e47a4cb60a 100644 --- a/drivers/clk/tegra/clk-tegra114.c +++ b/drivers/clk/tegra/clk-tegra114.c @@ -735,8 +735,9 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = { [tegra_clk_fuse_burn] = { .dt_id = TEGRA114_CLK_FUSE_BURN, .present = true }, [tegra_clk_clk_32k] = { .dt_id = TEGRA114_CLK_CLK_32K, .present = true }, [tegra_clk_clk_m] = { .dt_id = TEGRA114_CLK_CLK_M, .present = true }, - [tegra_clk_clk_m_div2] = { .dt_id = TEGRA114_CLK_CLK_M_DIV2, .present = true }, - [tegra_clk_clk_m_div4] = { .dt_id = TEGRA114_CLK_CLK_M_DIV4, .present = true }, + [tegra_clk_osc] = { .dt_id = TEGRA114_CLK_OSC, .present = true }, + [tegra_clk_osc_div2] = { .dt_id = TEGRA114_CLK_OSC_DIV2, .present = true }, + [tegra_clk_osc_div4] = { .dt_id = TEGRA114_CLK_OSC_DIV4, .present = true }, [tegra_clk_pll_ref] = { .dt_id = TEGRA114_CLK_PLL_REF, .present = true }, [tegra_clk_pll_c] = { .dt_id = TEGRA114_CLK_PLL_C, .present = true }, [tegra_clk_pll_c_out1] = { .dt_id = TEGRA114_CLK_PLL_C_OUT1, .present = true }, @@ -778,10 +779,6 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = { [tegra_clk_audio3] = { .dt_id = TEGRA114_CLK_AUDIO3, .present = true }, [tegra_clk_audio4] = { .dt_id = TEGRA114_CLK_AUDIO4, .present = true }, [tegra_clk_spdif] = { .dt_id = TEGRA114_CLK_SPDIF, .present = true }, - [tegra_clk_clk_out_1] = { .dt_id = TEGRA114_CLK_CLK_OUT_1, .present = true }, - [tegra_clk_clk_out_2] = { .dt_id = TEGRA114_CLK_CLK_OUT_2, .present = true }, - [tegra_clk_clk_out_3] = { .dt_id = TEGRA114_CLK_CLK_OUT_3, .present = true }, - [tegra_clk_blink] = { .dt_id = TEGRA114_CLK_BLINK, .present = true }, [tegra_clk_xusb_host_src] = { .dt_id = TEGRA114_CLK_XUSB_HOST_SRC, .present = true }, [tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA114_CLK_XUSB_FALCON_SRC, .present = true }, [tegra_clk_xusb_fs_src] = { .dt_id = TEGRA114_CLK_XUSB_FS_SRC, .present = true }, @@ -803,9 +800,6 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = { [tegra_clk_audio3_mux] = { .dt_id = TEGRA114_CLK_AUDIO3_MUX, .present = true }, [tegra_clk_audio4_mux] = { .dt_id = TEGRA114_CLK_AUDIO4_MUX, .present = true }, [tegra_clk_spdif_mux] = { .dt_id = TEGRA114_CLK_SPDIF_MUX, .present = true }, - [tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA114_CLK_CLK_OUT_1_MUX, .present = true }, - [tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA114_CLK_CLK_OUT_2_MUX, .present = true }, - [tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA114_CLK_CLK_OUT_3_MUX, .present = true }, [tegra_clk_dsia_mux] = { .dt_id = TEGRA114_CLK_DSIA_MUX, .present = true }, [tegra_clk_dsib_mux] = { .dt_id = TEGRA114_CLK_DSIB_MUX, .present = true }, [tegra_clk_cec] = { .dt_id = TEGRA114_CLK_CEC, .present = true }, @@ -815,8 +809,9 @@ static struct tegra_devclk devclks[] __initdata = { { .con_id = "clk_m", .dt_id = TEGRA114_CLK_CLK_M }, { .con_id = "pll_ref", .dt_id = TEGRA114_CLK_PLL_REF }, { .con_id = "clk_32k", .dt_id = TEGRA114_CLK_CLK_32K }, - { .con_id = "clk_m_div2", .dt_id = TEGRA114_CLK_CLK_M_DIV2 }, - { .con_id = "clk_m_div4", .dt_id = TEGRA114_CLK_CLK_M_DIV4 }, + { .con_id = "osc", .dt_id = TEGRA114_CLK_OSC }, + { .con_id = "osc_div2", .dt_id = TEGRA114_CLK_OSC_DIV2 }, + { .con_id = "osc_div4", .dt_id = TEGRA114_CLK_OSC_DIV4 }, { .con_id = "pll_c", .dt_id = TEGRA114_CLK_PLL_C }, { .con_id = "pll_c_out1", .dt_id = TEGRA114_CLK_PLL_C_OUT1 }, { .con_id = "pll_c2", .dt_id = TEGRA114_CLK_PLL_C2 }, @@ -863,10 +858,9 @@ static struct tegra_devclk devclks[] __initdata = { { .con_id = "audio3_2x", .dt_id = TEGRA114_CLK_AUDIO3_2X }, { .con_id = "audio4_2x", .dt_id = TEGRA114_CLK_AUDIO4_2X }, { .con_id = "spdif_2x", .dt_id = TEGRA114_CLK_SPDIF_2X }, - { .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA114_CLK_EXTERN1 }, - { .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA114_CLK_EXTERN2 }, - { .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA114_CLK_EXTERN3 }, - { .con_id = "blink", .dt_id = TEGRA114_CLK_BLINK }, + { .con_id = "extern1", .dt_id = TEGRA114_CLK_EXTERN1 }, + { .con_id = "extern2", .dt_id = TEGRA114_CLK_EXTERN2 }, + { .con_id = "extern3", .dt_id = TEGRA114_CLK_EXTERN3 }, { .con_id = "cclk_g", .dt_id = TEGRA114_CLK_CCLK_G }, { .con_id = "cclk_lp", .dt_id = TEGRA114_CLK_CCLK_LP }, { .con_id = "sclk", .dt_id = TEGRA114_CLK_SCLK }, @@ -900,17 +894,6 @@ static void __init tegra114_fixed_clk_init(void __iomem *clk_base) /* clk_32k */ clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, 0, 32768); clks[TEGRA114_CLK_CLK_32K] = clk; - - /* clk_m_div2 */ - clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m", - CLK_SET_RATE_PARENT, 1, 2); - clks[TEGRA114_CLK_CLK_M_DIV2] = clk; - - /* clk_m_div4 */ - clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m", - CLK_SET_RATE_PARENT, 1, 4); - clks[TEGRA114_CLK_CLK_M_DIV4] = clk; - } static void __init tegra114_pll_init(void __iomem *clk_base, @@ -1153,11 +1136,8 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA114_CLK_UARTB, TEGRA114_CLK_PLL_P, 408000000, 0 }, { TEGRA114_CLK_UARTC, TEGRA114_CLK_PLL_P, 408000000, 0 }, { TEGRA114_CLK_UARTD, TEGRA114_CLK_PLL_P, 408000000, 0 }, - { TEGRA114_CLK_PLL_A, TEGRA114_CLK_CLK_MAX, 564480000, 1 }, - { TEGRA114_CLK_PLL_A_OUT0, TEGRA114_CLK_CLK_MAX, 11289600, 1 }, - { TEGRA114_CLK_EXTERN1, TEGRA114_CLK_PLL_A_OUT0, 0, 1 }, - { TEGRA114_CLK_CLK_OUT_1_MUX, TEGRA114_CLK_EXTERN1, 0, 1 }, - { TEGRA114_CLK_CLK_OUT_1, TEGRA114_CLK_CLK_MAX, 0, 1 }, + { TEGRA114_CLK_PLL_A, TEGRA114_CLK_CLK_MAX, 564480000, 0 }, + { TEGRA114_CLK_PLL_A_OUT0, TEGRA114_CLK_CLK_MAX, 11289600, 0 }, { TEGRA114_CLK_I2S0, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0 }, { TEGRA114_CLK_I2S1, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0 }, { TEGRA114_CLK_I2S2, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0 }, @@ -1359,7 +1339,6 @@ static void __init tegra114_clock_init(struct device_node *np) tegra_audio_clk_init(clk_base, pmc_base, tegra114_clks, tegra114_audio_plls, ARRAY_SIZE(tegra114_audio_plls), 24000000); - tegra_pmc_clk_init(pmc_base, tegra114_clks); tegra_super_clk_gen4_init(clk_base, pmc_base, tegra114_clks, &pll_x_params); diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c index b3110d5b5a6cc..64e229ddf2a58 100644 --- a/drivers/clk/tegra/clk-tegra124.c +++ b/drivers/clk/tegra/clk-tegra124.c @@ -860,8 +860,9 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = { [tegra_clk_fuse_burn] = { .dt_id = TEGRA124_CLK_FUSE_BURN, .present = true }, [tegra_clk_clk_32k] = { .dt_id = TEGRA124_CLK_CLK_32K, .present = true }, [tegra_clk_clk_m] = { .dt_id = TEGRA124_CLK_CLK_M, .present = true }, - [tegra_clk_clk_m_div2] = { .dt_id = TEGRA124_CLK_CLK_M_DIV2, .present = true }, - [tegra_clk_clk_m_div4] = { .dt_id = TEGRA124_CLK_CLK_M_DIV4, .present = true }, + [tegra_clk_osc] = { .dt_id = TEGRA124_CLK_OSC, .present = true }, + [tegra_clk_osc_div2] = { .dt_id = TEGRA124_CLK_OSC_DIV2, .present = true }, + [tegra_clk_osc_div4] = { .dt_id = TEGRA124_CLK_OSC_DIV4, .present = true }, [tegra_clk_pll_ref] = { .dt_id = TEGRA124_CLK_PLL_REF, .present = true }, [tegra_clk_pll_c] = { .dt_id = TEGRA124_CLK_PLL_C, .present = true }, [tegra_clk_pll_c_out1] = { .dt_id = TEGRA124_CLK_PLL_C_OUT1, .present = true }, @@ -902,10 +903,6 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = { [tegra_clk_audio3] = { .dt_id = TEGRA124_CLK_AUDIO3, .present = true }, [tegra_clk_audio4] = { .dt_id = TEGRA124_CLK_AUDIO4, .present = true }, [tegra_clk_spdif] = { .dt_id = TEGRA124_CLK_SPDIF, .present = true }, - [tegra_clk_clk_out_1] = { .dt_id = TEGRA124_CLK_CLK_OUT_1, .present = true }, - [tegra_clk_clk_out_2] = { .dt_id = TEGRA124_CLK_CLK_OUT_2, .present = true }, - [tegra_clk_clk_out_3] = { .dt_id = TEGRA124_CLK_CLK_OUT_3, .present = true }, - [tegra_clk_blink] = { .dt_id = TEGRA124_CLK_BLINK, .present = true }, [tegra_clk_xusb_host_src] = { .dt_id = TEGRA124_CLK_XUSB_HOST_SRC, .present = true }, [tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA124_CLK_XUSB_FALCON_SRC, .present = true }, [tegra_clk_xusb_fs_src] = { .dt_id = TEGRA124_CLK_XUSB_FS_SRC, .present = true }, @@ -931,9 +928,6 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = { [tegra_clk_audio3_mux] = { .dt_id = TEGRA124_CLK_AUDIO3_MUX, .present = true }, [tegra_clk_audio4_mux] = { .dt_id = TEGRA124_CLK_AUDIO4_MUX, .present = true }, [tegra_clk_spdif_mux] = { .dt_id = TEGRA124_CLK_SPDIF_MUX, .present = true }, - [tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_1_MUX, .present = true }, - [tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_2_MUX, .present = true }, - [tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_3_MUX, .present = true }, [tegra_clk_cec] = { .dt_id = TEGRA124_CLK_CEC, .present = true }, }; @@ -941,8 +935,9 @@ static struct tegra_devclk devclks[] __initdata = { { .con_id = "clk_m", .dt_id = TEGRA124_CLK_CLK_M }, { .con_id = "pll_ref", .dt_id = TEGRA124_CLK_PLL_REF }, { .con_id = "clk_32k", .dt_id = TEGRA124_CLK_CLK_32K }, - { .con_id = "clk_m_div2", .dt_id = TEGRA124_CLK_CLK_M_DIV2 }, - { .con_id = "clk_m_div4", .dt_id = TEGRA124_CLK_CLK_M_DIV4 }, + { .con_id = "osc", .dt_id = TEGRA124_CLK_OSC }, + { .con_id = "osc_div2", .dt_id = TEGRA124_CLK_OSC_DIV2 }, + { .con_id = "osc_div4", .dt_id = TEGRA124_CLK_OSC_DIV4 }, { .con_id = "pll_c", .dt_id = TEGRA124_CLK_PLL_C }, { .con_id = "pll_c_out1", .dt_id = TEGRA124_CLK_PLL_C_OUT1 }, { .con_id = "pll_c2", .dt_id = TEGRA124_CLK_PLL_C2 }, @@ -988,10 +983,9 @@ static struct tegra_devclk devclks[] __initdata = { { .con_id = "audio3_2x", .dt_id = TEGRA124_CLK_AUDIO3_2X }, { .con_id = "audio4_2x", .dt_id = TEGRA124_CLK_AUDIO4_2X }, { .con_id = "spdif_2x", .dt_id = TEGRA124_CLK_SPDIF_2X }, - { .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA124_CLK_EXTERN1 }, - { .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA124_CLK_EXTERN2 }, - { .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA124_CLK_EXTERN3 }, - { .con_id = "blink", .dt_id = TEGRA124_CLK_BLINK }, + { .con_id = "extern1", .dt_id = TEGRA124_CLK_EXTERN1 }, + { .con_id = "extern2", .dt_id = TEGRA124_CLK_EXTERN2 }, + { .con_id = "extern3", .dt_id = TEGRA124_CLK_EXTERN3 }, { .con_id = "cclk_g", .dt_id = TEGRA124_CLK_CCLK_G }, { .con_id = "cclk_lp", .dt_id = TEGRA124_CLK_CCLK_LP }, { .con_id = "sclk", .dt_id = TEGRA124_CLK_SCLK }, @@ -1298,11 +1292,8 @@ static struct tegra_clk_init_table common_init_table[] __initdata = { { TEGRA124_CLK_UARTB, TEGRA124_CLK_PLL_P, 408000000, 0 }, { TEGRA124_CLK_UARTC, TEGRA124_CLK_PLL_P, 408000000, 0 }, { TEGRA124_CLK_UARTD, TEGRA124_CLK_PLL_P, 408000000, 0 }, - { TEGRA124_CLK_PLL_A, TEGRA124_CLK_CLK_MAX, 564480000, 1 }, - { TEGRA124_CLK_PLL_A_OUT0, TEGRA124_CLK_CLK_MAX, 11289600, 1 }, - { TEGRA124_CLK_EXTERN1, TEGRA124_CLK_PLL_A_OUT0, 0, 1 }, - { TEGRA124_CLK_CLK_OUT_1_MUX, TEGRA124_CLK_EXTERN1, 0, 1 }, - { TEGRA124_CLK_CLK_OUT_1, TEGRA124_CLK_CLK_MAX, 0, 1 }, + { TEGRA124_CLK_PLL_A, TEGRA124_CLK_CLK_MAX, 564480000, 0 }, + { TEGRA124_CLK_PLL_A_OUT0, TEGRA124_CLK_CLK_MAX, 11289600, 0 }, { TEGRA124_CLK_I2S0, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0 }, { TEGRA124_CLK_I2S1, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0 }, { TEGRA124_CLK_I2S2, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0 }, @@ -1457,11 +1448,9 @@ static void __init tegra132_clock_apply_init_table(void) * tegra124_132_clock_init_pre - clock initialization preamble for T124/T132 * @np: struct device_node * of the DT node for the SoC CAR IP block * - * Register most of the clocks controlled by the CAR IP block, along - * with a few clocks controlled by the PMC IP block. Everything in - * this function should be common to Tegra124 and Tegra132. XXX The - * PMC clock initialization should probably be moved to PMC-specific - * driver code. No return value. + * Register most of the clocks controlled by the CAR IP block. + * Everything in this function should be common to Tegra124 and Tegra132. + * No return value. */ static void __init tegra124_132_clock_init_pre(struct device_node *np) { @@ -1504,7 +1493,6 @@ static void __init tegra124_132_clock_init_pre(struct device_node *np) tegra_audio_clk_init(clk_base, pmc_base, tegra124_clks, tegra124_audio_plls, ARRAY_SIZE(tegra124_audio_plls), 24576000); - tegra_pmc_clk_init(pmc_base, tegra124_clks); /* For Tegra124 & Tegra132, PLLD is the only source for DSIA & DSIB */ plld_base = readl(clk_base + PLLD_BASE); @@ -1516,11 +1504,11 @@ static void __init tegra124_132_clock_init_pre(struct device_node *np) * tegra124_132_clock_init_post - clock initialization postamble for T124/T132 * @np: struct device_node * of the DT node for the SoC CAR IP block * - * Register most of the along with a few clocks controlled by the PMC - * IP block. Everything in this function should be common to Tegra124 + * Register most of the clocks controlled by the CAR IP block. + * Everything in this function should be common to Tegra124 * and Tegra132. This function must be called after - * tegra124_132_clock_init_pre(), otherwise clk_base and pmc_base will - * not be set. No return value. + * tegra124_132_clock_init_pre(), otherwise clk_base will not be set. + * No return value. */ static void __init tegra124_132_clock_init_post(struct device_node *np) { diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index fff5cba87637a..085feb04e9132 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -458,7 +458,6 @@ static struct tegra_devclk devclks[] __initdata = { { .con_id = "cdev1", .dt_id = TEGRA20_CLK_CDEV1 }, { .con_id = "cdev2", .dt_id = TEGRA20_CLK_CDEV2 }, { .con_id = "clk_32k", .dt_id = TEGRA20_CLK_CLK_32K }, - { .con_id = "blink", .dt_id = TEGRA20_CLK_BLINK }, { .con_id = "clk_m", .dt_id = TEGRA20_CLK_CLK_M }, { .con_id = "pll_ref", .dt_id = TEGRA20_CLK_PLL_REF }, { .dev_id = "tegra20-i2s.0", .dt_id = TEGRA20_CLK_I2S1 }, @@ -537,7 +536,6 @@ static struct tegra_clk tegra20_clks[tegra_clk_max] __initdata = { [tegra_clk_csi] = { .dt_id = TEGRA20_CLK_CSI, .present = true }, [tegra_clk_isp] = { .dt_id = TEGRA20_CLK_ISP, .present = true }, [tegra_clk_clk_32k] = { .dt_id = TEGRA20_CLK_CLK_32K, .present = true }, - [tegra_clk_blink] = { .dt_id = TEGRA20_CLK_BLINK, .present = true }, [tegra_clk_hclk] = { .dt_id = TEGRA20_CLK_HCLK, .present = true }, [tegra_clk_pclk] = { .dt_id = TEGRA20_CLK_PCLK, .present = true }, [tegra_clk_pll_p_out1] = { .dt_id = TEGRA20_CLK_PLL_P_OUT1, .present = true }, @@ -1031,10 +1029,8 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA20_CLK_UARTC, TEGRA20_CLK_PLL_P, 0, 0 }, { TEGRA20_CLK_UARTD, TEGRA20_CLK_PLL_P, 0, 0 }, { TEGRA20_CLK_UARTE, TEGRA20_CLK_PLL_P, 0, 0 }, - { TEGRA20_CLK_PLL_A, TEGRA20_CLK_CLK_MAX, 56448000, 1 }, - { TEGRA20_CLK_PLL_A_OUT0, TEGRA20_CLK_CLK_MAX, 11289600, 1 }, - { TEGRA20_CLK_CDEV1, TEGRA20_CLK_CLK_MAX, 0, 1 }, - { TEGRA20_CLK_BLINK, TEGRA20_CLK_CLK_MAX, 32768, 1 }, + { TEGRA20_CLK_PLL_A, TEGRA20_CLK_CLK_MAX, 56448000, 0 }, + { TEGRA20_CLK_PLL_A_OUT0, TEGRA20_CLK_CLK_MAX, 11289600, 0 }, { TEGRA20_CLK_I2S1, TEGRA20_CLK_PLL_A_OUT0, 11289600, 0 }, { TEGRA20_CLK_I2S2, TEGRA20_CLK_PLL_A_OUT0, 11289600, 0 }, { TEGRA20_CLK_SDMMC1, TEGRA20_CLK_PLL_P, 48000000, 0 }, @@ -1146,7 +1142,6 @@ static void __init tegra20_clock_init(struct device_node *np) tegra_super_clk_gen4_init(clk_base, pmc_base, tegra20_clks, NULL); tegra20_periph_clk_init(); tegra20_audio_clk_init(); - tegra_pmc_clk_init(pmc_base, tegra20_clks); tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA20_CLK_CLK_MAX); diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c index 762cd186f7141..c6304f5e813eb 100644 --- a/drivers/clk/tegra/clk-tegra210.c +++ b/drivers/clk/tegra/clk-tegra210.c @@ -2371,8 +2371,9 @@ static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = { [tegra_clk_fuse_burn] = { .dt_id = TEGRA210_CLK_FUSE_BURN, .present = true }, [tegra_clk_clk_32k] = { .dt_id = TEGRA210_CLK_CLK_32K, .present = true }, [tegra_clk_clk_m] = { .dt_id = TEGRA210_CLK_CLK_M, .present = true }, - [tegra_clk_clk_m_div2] = { .dt_id = TEGRA210_CLK_CLK_M_DIV2, .present = true }, - [tegra_clk_clk_m_div4] = { .dt_id = TEGRA210_CLK_CLK_M_DIV4, .present = true }, + [tegra_clk_osc] = { .dt_id = TEGRA210_CLK_OSC, .present = true }, + [tegra_clk_osc_div2] = { .dt_id = TEGRA210_CLK_OSC_DIV2, .present = true }, + [tegra_clk_osc_div4] = { .dt_id = TEGRA210_CLK_OSC_DIV4, .present = true }, [tegra_clk_pll_ref] = { .dt_id = TEGRA210_CLK_PLL_REF, .present = true }, [tegra_clk_pll_c] = { .dt_id = TEGRA210_CLK_PLL_C, .present = true }, [tegra_clk_pll_c_out1] = { .dt_id = TEGRA210_CLK_PLL_C_OUT1, .present = true }, @@ -2417,10 +2418,6 @@ static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = { [tegra_clk_audio3] = { .dt_id = TEGRA210_CLK_AUDIO3, .present = true }, [tegra_clk_audio4] = { .dt_id = TEGRA210_CLK_AUDIO4, .present = true }, [tegra_clk_spdif] = { .dt_id = TEGRA210_CLK_SPDIF, .present = true }, - [tegra_clk_clk_out_1] = { .dt_id = TEGRA210_CLK_CLK_OUT_1, .present = true }, - [tegra_clk_clk_out_2] = { .dt_id = TEGRA210_CLK_CLK_OUT_2, .present = true }, - [tegra_clk_clk_out_3] = { .dt_id = TEGRA210_CLK_CLK_OUT_3, .present = true }, - [tegra_clk_blink] = { .dt_id = TEGRA210_CLK_BLINK, .present = true }, [tegra_clk_xusb_gate] = { .dt_id = TEGRA210_CLK_XUSB_GATE, .present = true }, [tegra_clk_xusb_host_src_8] = { .dt_id = TEGRA210_CLK_XUSB_HOST_SRC, .present = true }, [tegra_clk_xusb_falcon_src_8] = { .dt_id = TEGRA210_CLK_XUSB_FALCON_SRC, .present = true }, @@ -2452,9 +2449,6 @@ static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = { [tegra_clk_audio3_mux] = { .dt_id = TEGRA210_CLK_AUDIO3_MUX, .present = true }, [tegra_clk_audio4_mux] = { .dt_id = TEGRA210_CLK_AUDIO4_MUX, .present = true }, [tegra_clk_spdif_mux] = { .dt_id = TEGRA210_CLK_SPDIF_MUX, .present = true }, - [tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_1_MUX, .present = true }, - [tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_2_MUX, .present = true }, - [tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_3_MUX, .present = true }, [tegra_clk_maud] = { .dt_id = TEGRA210_CLK_MAUD, .present = true }, [tegra_clk_mipibif] = { .dt_id = TEGRA210_CLK_MIPIBIF, .present = true }, [tegra_clk_qspi] = { .dt_id = TEGRA210_CLK_QSPI, .present = true }, @@ -2497,8 +2491,9 @@ static struct tegra_devclk devclks[] __initdata = { { .con_id = "clk_m", .dt_id = TEGRA210_CLK_CLK_M }, { .con_id = "pll_ref", .dt_id = TEGRA210_CLK_PLL_REF }, { .con_id = "clk_32k", .dt_id = TEGRA210_CLK_CLK_32K }, - { .con_id = "clk_m_div2", .dt_id = TEGRA210_CLK_CLK_M_DIV2 }, - { .con_id = "clk_m_div4", .dt_id = TEGRA210_CLK_CLK_M_DIV4 }, + { .con_id = "osc", .dt_id = TEGRA210_CLK_OSC }, + { .con_id = "osc_div2", .dt_id = TEGRA210_CLK_OSC_DIV2 }, + { .con_id = "osc_div4", .dt_id = TEGRA210_CLK_OSC_DIV4 }, { .con_id = "pll_c", .dt_id = TEGRA210_CLK_PLL_C }, { .con_id = "pll_c_out1", .dt_id = TEGRA210_CLK_PLL_C_OUT1 }, { .con_id = "pll_c2", .dt_id = TEGRA210_CLK_PLL_C2 }, @@ -2540,10 +2535,9 @@ static struct tegra_devclk devclks[] __initdata = { { .con_id = "audio4", .dt_id = TEGRA210_CLK_AUDIO4 }, { .con_id = "spdif", .dt_id = TEGRA210_CLK_SPDIF }, { .con_id = "spdif_2x", .dt_id = TEGRA210_CLK_SPDIF_2X }, - { .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA210_CLK_EXTERN1 }, - { .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA210_CLK_EXTERN2 }, - { .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA210_CLK_EXTERN3 }, - { .con_id = "blink", .dt_id = TEGRA210_CLK_BLINK }, + { .con_id = "extern1", .dt_id = TEGRA210_CLK_EXTERN1 }, + { .con_id = "extern2", .dt_id = TEGRA210_CLK_EXTERN2 }, + { .con_id = "extern3", .dt_id = TEGRA210_CLK_EXTERN3 }, { .con_id = "cclk_g", .dt_id = TEGRA210_CLK_CCLK_G }, { .con_id = "cclk_lp", .dt_id = TEGRA210_CLK_CCLK_LP }, { .con_id = "sclk", .dt_id = TEGRA210_CLK_SCLK }, @@ -3448,11 +3442,8 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA210_CLK_UARTB, TEGRA210_CLK_PLL_P, 408000000, 0 }, { TEGRA210_CLK_UARTC, TEGRA210_CLK_PLL_P, 408000000, 0 }, { TEGRA210_CLK_UARTD, TEGRA210_CLK_PLL_P, 408000000, 0 }, - { TEGRA210_CLK_PLL_A, TEGRA210_CLK_CLK_MAX, 564480000, 1 }, - { TEGRA210_CLK_PLL_A_OUT0, TEGRA210_CLK_CLK_MAX, 11289600, 1 }, - { TEGRA210_CLK_EXTERN1, TEGRA210_CLK_PLL_A_OUT0, 0, 1 }, - { TEGRA210_CLK_CLK_OUT_1_MUX, TEGRA210_CLK_EXTERN1, 0, 1 }, - { TEGRA210_CLK_CLK_OUT_1, TEGRA210_CLK_CLK_MAX, 0, 1 }, + { TEGRA210_CLK_PLL_A, TEGRA210_CLK_CLK_MAX, 564480000, 0 }, + { TEGRA210_CLK_PLL_A_OUT0, TEGRA210_CLK_CLK_MAX, 11289600, 0 }, { TEGRA210_CLK_I2S0, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 }, { TEGRA210_CLK_I2S1, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 }, { TEGRA210_CLK_I2S2, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 }, @@ -3693,7 +3684,6 @@ static void __init tegra210_clock_init(struct device_node *np) tegra_audio_clk_init(clk_base, pmc_base, tegra210_clks, tegra210_audio_plls, ARRAY_SIZE(tegra210_audio_plls), 24576000); - tegra_pmc_clk_init(pmc_base, tegra210_clks); /* For Tegra210, PLLD is the only source for DSIA & DSIB */ value = readl(clk_base + PLLD_BASE); diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index b20891489e11b..3255f82e61b58 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -569,10 +569,9 @@ static struct tegra_devclk devclks[] __initdata = { { .con_id = "audio3_2x", .dt_id = TEGRA30_CLK_AUDIO3_2X }, { .con_id = "audio4_2x", .dt_id = TEGRA30_CLK_AUDIO4_2X }, { .con_id = "spdif_2x", .dt_id = TEGRA30_CLK_SPDIF_2X }, - { .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA30_CLK_EXTERN1 }, - { .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA30_CLK_EXTERN2 }, - { .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA30_CLK_EXTERN3 }, - { .con_id = "blink", .dt_id = TEGRA30_CLK_BLINK }, + { .con_id = "extern1", .dt_id = TEGRA30_CLK_EXTERN1 }, + { .con_id = "extern2", .dt_id = TEGRA30_CLK_EXTERN2 }, + { .con_id = "extern3", .dt_id = TEGRA30_CLK_EXTERN3 }, { .con_id = "cclk_g", .dt_id = TEGRA30_CLK_CCLK_G }, { .con_id = "cclk_lp", .dt_id = TEGRA30_CLK_CCLK_LP }, { .con_id = "sclk", .dt_id = TEGRA30_CLK_SCLK }, @@ -581,8 +580,9 @@ static struct tegra_devclk devclks[] __initdata = { { .con_id = "twd", .dt_id = TEGRA30_CLK_TWD }, { .con_id = "emc", .dt_id = TEGRA30_CLK_EMC }, { .con_id = "clk_32k", .dt_id = TEGRA30_CLK_CLK_32K }, - { .con_id = "clk_m_div2", .dt_id = TEGRA30_CLK_CLK_M_DIV2 }, - { .con_id = "clk_m_div4", .dt_id = TEGRA30_CLK_CLK_M_DIV4 }, + { .con_id = "osc", .dt_id = TEGRA30_CLK_OSC }, + { .con_id = "osc_div2", .dt_id = TEGRA30_CLK_OSC_DIV2 }, + { .con_id = "osc_div4", .dt_id = TEGRA30_CLK_OSC_DIV4 }, { .con_id = "cml0", .dt_id = TEGRA30_CLK_CML0 }, { .con_id = "cml1", .dt_id = TEGRA30_CLK_CML1 }, { .con_id = "clk_m", .dt_id = TEGRA30_CLK_CLK_M }, @@ -683,8 +683,9 @@ static struct tegra_devclk devclks[] __initdata = { static struct tegra_clk tegra30_clks[tegra_clk_max] __initdata = { [tegra_clk_clk_32k] = { .dt_id = TEGRA30_CLK_CLK_32K, .present = true }, [tegra_clk_clk_m] = { .dt_id = TEGRA30_CLK_CLK_M, .present = true }, - [tegra_clk_clk_m_div2] = { .dt_id = TEGRA30_CLK_CLK_M_DIV2, .present = true }, - [tegra_clk_clk_m_div4] = { .dt_id = TEGRA30_CLK_CLK_M_DIV4, .present = true }, + [tegra_clk_osc] = { .dt_id = TEGRA30_CLK_OSC, .present = true }, + [tegra_clk_osc_div2] = { .dt_id = TEGRA30_CLK_OSC_DIV2, .present = true }, + [tegra_clk_osc_div4] = { .dt_id = TEGRA30_CLK_OSC_DIV4, .present = true }, [tegra_clk_pll_ref] = { .dt_id = TEGRA30_CLK_PLL_REF, .present = true }, [tegra_clk_spdif_in_sync] = { .dt_id = TEGRA30_CLK_SPDIF_IN_SYNC, .present = true }, [tegra_clk_i2s0_sync] = { .dt_id = TEGRA30_CLK_I2S0_SYNC, .present = true }, @@ -711,13 +712,6 @@ static struct tegra_clk tegra30_clks[tegra_clk_max] __initdata = { [tegra_clk_audio3_2x] = { .dt_id = TEGRA30_CLK_AUDIO3_2X, .present = true }, [tegra_clk_audio4_2x] = { .dt_id = TEGRA30_CLK_AUDIO4_2X, .present = true }, [tegra_clk_spdif_2x] = { .dt_id = TEGRA30_CLK_SPDIF_2X, .present = true }, - [tegra_clk_clk_out_1] = { .dt_id = TEGRA30_CLK_CLK_OUT_1, .present = true }, - [tegra_clk_clk_out_2] = { .dt_id = TEGRA30_CLK_CLK_OUT_2, .present = true }, - [tegra_clk_clk_out_3] = { .dt_id = TEGRA30_CLK_CLK_OUT_3, .present = true }, - [tegra_clk_blink] = { .dt_id = TEGRA30_CLK_BLINK, .present = true }, - [tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA30_CLK_CLK_OUT_1_MUX, .present = true }, - [tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA30_CLK_CLK_OUT_2_MUX, .present = true }, - [tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA30_CLK_CLK_OUT_3_MUX, .present = true }, [tegra_clk_hclk] = { .dt_id = TEGRA30_CLK_HCLK, .present = true }, [tegra_clk_pclk] = { .dt_id = TEGRA30_CLK_PCLK, .present = true }, [tegra_clk_i2s0] = { .dt_id = TEGRA30_CLK_I2S0, .present = true }, @@ -1227,12 +1221,8 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA30_CLK_UARTC, TEGRA30_CLK_PLL_P, 408000000, 0 }, { TEGRA30_CLK_UARTD, TEGRA30_CLK_PLL_P, 408000000, 0 }, { TEGRA30_CLK_UARTE, TEGRA30_CLK_PLL_P, 408000000, 0 }, - { TEGRA30_CLK_PLL_A, TEGRA30_CLK_CLK_MAX, 564480000, 1 }, - { TEGRA30_CLK_PLL_A_OUT0, TEGRA30_CLK_CLK_MAX, 11289600, 1 }, - { TEGRA30_CLK_EXTERN1, TEGRA30_CLK_PLL_A_OUT0, 0, 1 }, - { TEGRA30_CLK_CLK_OUT_1_MUX, TEGRA30_CLK_EXTERN1, 0, 0 }, - { TEGRA30_CLK_CLK_OUT_1, TEGRA30_CLK_CLK_MAX, 0, 1 }, - { TEGRA30_CLK_BLINK, TEGRA30_CLK_CLK_MAX, 0, 1 }, + { TEGRA30_CLK_PLL_A, TEGRA30_CLK_CLK_MAX, 564480000, 0 }, + { TEGRA30_CLK_PLL_A_OUT0, TEGRA30_CLK_CLK_MAX, 11289600, 0 }, { TEGRA30_CLK_I2S0, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 }, { TEGRA30_CLK_I2S1, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 }, { TEGRA30_CLK_I2S2, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 }, @@ -1362,7 +1352,6 @@ static void __init tegra30_clock_init(struct device_node *np) tegra_audio_clk_init(clk_base, pmc_base, tegra30_clks, tegra30_audio_plls, ARRAY_SIZE(tegra30_audio_plls), 24000000); - tegra_pmc_clk_init(pmc_base, tegra30_clks); tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA30_CLK_CLK_MAX); diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h index 416a6b09f6a36..2c9a68302e02c 100644 --- a/drivers/clk/tegra/clk.h +++ b/drivers/clk/tegra/clk.h @@ -854,7 +854,6 @@ void tegra_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base, struct tegra_clk *tegra_clks, struct tegra_clk_pll_params *pll_params); -void tegra_pmc_clk_init(void __iomem *pmc_base, struct tegra_clk *tegra_clks); void tegra_fixed_clk_init(struct tegra_clk *tegra_clks); int tegra_osc_clk_init(void __iomem *clk_base, struct tegra_clk *clks, unsigned long *input_freqs, unsigned int num, diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h index bb5c2c999c059..df59aaf5bf348 100644 --- a/include/dt-bindings/clock/tegra114-car.h +++ b/include/dt-bindings/clock/tegra114-car.h @@ -228,6 +228,8 @@ #define TEGRA114_CLK_CLK_M 201 #define TEGRA114_CLK_CLK_M_DIV2 202 #define TEGRA114_CLK_CLK_M_DIV4 203 +#define TEGRA114_CLK_OSC_DIV2 202 +#define TEGRA114_CLK_OSC_DIV4 203 #define TEGRA114_CLK_PLL_REF 204 #define TEGRA114_CLK_PLL_C 205 #define TEGRA114_CLK_PLL_C_OUT1 206 @@ -274,7 +276,7 @@ #define TEGRA114_CLK_CLK_OUT_2 246 #define TEGRA114_CLK_CLK_OUT_3 247 #define TEGRA114_CLK_BLINK 248 -/* 249 */ +#define TEGRA114_CLK_OSC 249 /* 250 */ /* 251 */ #define TEGRA114_CLK_XUSB_HOST_SRC 252 diff --git a/include/dt-bindings/clock/tegra124-car-common.h b/include/dt-bindings/clock/tegra124-car-common.h index 0c4f5be0a7422..2a9acd592bff4 100644 --- a/include/dt-bindings/clock/tegra124-car-common.h +++ b/include/dt-bindings/clock/tegra124-car-common.h @@ -227,6 +227,8 @@ #define TEGRA124_CLK_CLK_M 201 #define TEGRA124_CLK_CLK_M_DIV2 202 #define TEGRA124_CLK_CLK_M_DIV4 203 +#define TEGRA124_CLK_OSC_DIV2 202 +#define TEGRA124_CLK_OSC_DIV4 203 #define TEGRA124_CLK_PLL_REF 204 #define TEGRA124_CLK_PLL_C 205 #define TEGRA124_CLK_PLL_C_OUT1 206 @@ -273,7 +275,7 @@ #define TEGRA124_CLK_CLK_OUT_2 246 #define TEGRA124_CLK_CLK_OUT_3 247 #define TEGRA124_CLK_BLINK 248 -/* 249 */ +#define TEGRA124_CLK_OSC 249 /* 250 */ /* 251 */ #define TEGRA124_CLK_XUSB_HOST_SRC 252 diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h index 44f60623f99bd..7a8f10b9a66de 100644 --- a/include/dt-bindings/clock/tegra210-car.h +++ b/include/dt-bindings/clock/tegra210-car.h @@ -262,6 +262,8 @@ #define TEGRA210_CLK_CLK_M 233 #define TEGRA210_CLK_CLK_M_DIV2 234 #define TEGRA210_CLK_CLK_M_DIV4 235 +#define TEGRA210_CLK_OSC_DIV2 234 +#define TEGRA210_CLK_OSC_DIV4 235 #define TEGRA210_CLK_PLL_REF 236 #define TEGRA210_CLK_PLL_C 237 #define TEGRA210_CLK_PLL_C_OUT1 238 @@ -355,7 +357,7 @@ #define TEGRA210_CLK_PLL_A_OUT_ADSP 323 #define TEGRA210_CLK_PLL_A_OUT0_OUT_ADSP 324 /* 325 */ -/* 326 */ +#define TEGRA210_CLK_OSC 326 /* 327 */ /* 328 */ /* 329 */ diff --git a/include/dt-bindings/clock/tegra30-car.h b/include/dt-bindings/clock/tegra30-car.h index 3c90f1535551a..7b542c10fc274 100644 --- a/include/dt-bindings/clock/tegra30-car.h +++ b/include/dt-bindings/clock/tegra30-car.h @@ -196,6 +196,8 @@ #define TEGRA30_CLK_CLK_M 171 #define TEGRA30_CLK_CLK_M_DIV2 172 #define TEGRA30_CLK_CLK_M_DIV4 173 +#define TEGRA30_CLK_OSC_DIV2 172 +#define TEGRA30_CLK_OSC_DIV4 173 #define TEGRA30_CLK_PLL_REF 174 #define TEGRA30_CLK_PLL_C 175 #define TEGRA30_CLK_PLL_C_OUT1 176 @@ -243,7 +245,7 @@ #define TEGRA30_CLK_HCLK 217 #define TEGRA30_CLK_PCLK 218 /* 219 */ -/* 220 */ +#define TEGRA30_CLK_OSC 220 /* 221 */ /* 222 */ /* 223 */ diff --git a/include/dt-bindings/soc/tegra-pmc.h b/include/dt-bindings/soc/tegra-pmc.h new file mode 100644 index 0000000000000..a99a457471ee6 --- /dev/null +++ b/include/dt-bindings/soc/tegra-pmc.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2019-2020, NVIDIA CORPORATION. All rights reserved. + */ + +#ifndef _DT_BINDINGS_SOC_TEGRA_PMC_H +#define _DT_BINDINGS_SOC_TEGRA_PMC_H + +#define TEGRA_PMC_CLK_OUT_1 0 +#define TEGRA_PMC_CLK_OUT_2 1 +#define TEGRA_PMC_CLK_OUT_3 2 +#define TEGRA_PMC_CLK_BLINK 3 + +#define TEGRA_PMC_CLK_MAX 4 + +#endif /* _DT_BINDINGS_SOC_TEGRA_PMC_H */