Merge tag 'amlogic-drivers-2' into v4.8/dt64-2

Amlogic driver updates for v4.9, 2nd round
- media: update IR support for newer SoCs
- firmware: add secure monitor driver
- net: new stmmac glue driver
- usb: udd DWC2 support for meson-gxbb
- clocks: expose more clock IDs for use by DT
- DT binding updates

Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt

@@ -0,0 +1,45 @@
+* Amlogic GXBB AO Clock and Reset Unit
+
+The Amlogic GXBB AO clock controller generates and supplies clock to various
+controllers within the Always-On part of the SoC.
+
+Required Properties:
+
+- compatible: should be "amlogic,gxbb-aoclkc"
+- reg: physical base address of the clock controller and length of memory
+       mapped region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/gxbb-aoclkc.h header and can be
+used in device tree sources.
+
+- #reset-cells: should be 1.
+
+Each reset is assigned an identifier and client nodes can use this identifier
+to specify the reset which they consume. All available resets are defined as
+preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be
+used in device tree sources.
+
+Example: AO Clock controller node:
+
+	clkc_AO: clock-controller@040 {
+		compatible = "amlogic,gxbb-aoclkc";
+		reg = <0x0 0x040 0x0 0x4>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock and reset generated
+  by the clock controller:
+
+	uart_AO: serial@4c0 {
+		compatible = "amlogic,meson-uart";
+		reg = <0x4c0 0x14>;
+		interrupts = <0 90 1>;
+		clocks = <&clkc_AO CLKID_AO_UART1>;
+		resets = <&clkc_AO RESET_AO_UART1>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/net/meson-dwmac.txt

@@ -1,18 +1,32 @@
 * Amlogic Meson DWMAC Ethernet controller
 
 The device inherits all the properties of the dwmac/stmmac devices
-described in the file net/stmmac.txt with the following changes.
+described in the file stmmac.txt in the current directory with the
+following changes.
 
-Required properties:
+Required properties on all platforms:
 
-- compatible: should be "amlogic,meson6-dwmac" along with "snps,dwmac"
-	      and any applicable more detailed version number
-	      described in net/stmmac.txt
+- compatible:	Depending on the platform this should be one of:
+			- "amlogic,meson6-dwmac"
+			- "amlogic,meson8b-dwmac"
+			- "amlogic,meson-gxbb-dwmac"
+		Additionally "snps,dwmac" and any applicable more
+		detailed version number described in net/stmmac.txt
+		should be used.
 
-- reg: should contain a register range for the dwmac controller and
-       another one for the Amlogic specific configuration
+- reg:	The first register range should be the one of the DWMAC
+	controller. The second range is is for the Amlogic specific
+	configuration (for example the PRG_ETHERNET register range
+	on Meson8b and newer)
 
-Example:
+Required properties on Meson8b and newer:
+- clock-names:	Should contain the following:
+		- "stmmaceth" - see stmmac.txt
+		- "clkin0" - first parent clock of the internal mux
+		- "clkin1" - second parent clock of the internal mux
+
+
+Example for Meson6:
 
 	ethmac: ethernet@c9410000 {
 		compatible = "amlogic,meson6-dwmac", "snps,dwmac";
@@ -23,3 +37,18 @@ Example:
 		clocks = <&clk81>;
 		clock-names = "stmmaceth";
 	}
+
+Example for GXBB:
+	ethmac: ethernet@c9410000 {
+		compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+		reg = <0x0 0xc9410000 0x0 0x10000>,
+			<0x0 0xc8834540 0x0 0x8>;
+		interrupts = <0 8 1>;
+		interrupt-names = "macirq";
+		clocks = <&clkc CLKID_ETH>,
+				<&clkc CLKID_FCLK_DIV2>,
+				<&clkc CLKID_MPLL2>;
+		clock-names = "stmmaceth", "clkin0", "clkin1";
+		phy-mode = "rgmii";
+		status = "disabled";
+	};

Documentation/devicetree/bindings/phy/meson-usb2-phy.txt

@@ -0,0 +1,27 @@
+* Amlogic USB2 PHY
+
+Required properties:
+- compatible:	Depending on the platform this should be one of:
+	"amlogic,meson8b-usb2-phy"
+	"amlogic,meson-gxbb-usb2-phy"
+- reg:		The base address and length of the registers
+- #phys-cells:	should be 0 (see phy-bindings.txt in this directory)
+- clocks:	phandle and clock identifier for the phy clocks
+- clock-names:	"usb_general" and "usb"
+
+Optional properties:
+- resets:	reference to the reset controller
+- phy-supply:	see phy-bindings.txt in this directory
+
+
+Example:
+
+usb0_phy: usb_phy@0 {
+	compatible = "amlogic,meson-gxbb-usb2-phy";
+	#phy-cells = <0>;
+	reg = <0x0 0x0 0x0 0x20>;
+	resets = <&reset RESET_USB_OTG>;
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+	clock-names = "usb_general", "usb";
+	phy-supply = <&usb_vbus>;
+};

Documentation/devicetree/bindings/usb/dwc2.txt

@@ -10,6 +10,8 @@ Required properties:
   - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
   - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
   - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
+  - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
+  - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
   - snps,dwc2: A generic DWC2 USB controller with default parameters.
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt

drivers/clk/meson/Makefile

@@ -3,5 +3,5 @@
 #
 
 obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o
-obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b-clkc.o
-obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o
+obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
+obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o

drivers/clk/meson/clkc.h

@@ -98,7 +98,7 @@ struct meson_clk_mpll {
 };
 
 #define MESON_GATE(_name, _reg, _bit)					\
-struct clk_gate gxbb_##_name = { 						\
+struct clk_gate _name = { 						\
 	.reg = (void __iomem *) _reg, 					\
 	.bit_idx = (_bit), 						\
 	.lock = &clk_lock,						\

drivers/clk/meson/gxbb-aoclk.c

@@ -0,0 +1,191 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/init.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
+
+static DEFINE_SPINLOCK(gxbb_aoclk_lock);
+
+struct gxbb_aoclk_reset_controller {
+	struct reset_controller_dev reset;
+	unsigned int *data;
+	void __iomem *base;
+};
+
+static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct gxbb_aoclk_reset_controller *reset =
+		container_of(rcdev, struct gxbb_aoclk_reset_controller, reset);
+
+	writel(BIT(reset->data[id]), reset->base);
+
+	return 0;
+}
+
+static const struct reset_control_ops gxbb_aoclk_reset_ops = {
+	.reset = gxbb_aoclk_do_reset,
+};
+
+#define GXBB_AO_GATE(_name, _bit)					\
+static struct clk_gate _name##_ao = {					\
+	.reg = (void __iomem *)0,					\
+	.bit_idx = (_bit),						\
+	.lock = &gxbb_aoclk_lock,					\
+	.hw.init = &(struct clk_init_data) {				\
+		.name = #_name "_ao",					\
+		.ops = &clk_gate_ops,					\
+		.parent_names = (const char *[]){ "clk81" },		\
+		.num_parents = 1,					\
+		.flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED),	\
+	},								\
+}
+
+GXBB_AO_GATE(remote, 0);
+GXBB_AO_GATE(i2c_master, 1);
+GXBB_AO_GATE(i2c_slave, 2);
+GXBB_AO_GATE(uart1, 3);
+GXBB_AO_GATE(uart2, 5);
+GXBB_AO_GATE(ir_blaster, 6);
+
+static unsigned int gxbb_aoclk_reset[] = {
+	[RESET_AO_REMOTE] = 16,
+	[RESET_AO_I2C_MASTER] = 18,
+	[RESET_AO_I2C_SLAVE] = 19,
+	[RESET_AO_UART1] = 17,
+	[RESET_AO_UART2] = 22,
+	[RESET_AO_IR_BLASTER] = 23,
+};
+
+static struct clk_gate *gxbb_aoclk_gate[] = {
+	[CLKID_AO_REMOTE] = &remote_ao,
+	[CLKID_AO_I2C_MASTER] = &i2c_master_ao,
+	[CLKID_AO_I2C_SLAVE] = &i2c_slave_ao,
+	[CLKID_AO_UART1] = &uart1_ao,
+	[CLKID_AO_UART2] = &uart2_ao,
+	[CLKID_AO_IR_BLASTER] = &ir_blaster_ao,
+};
+
+static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
+	.hws = {
+		[CLKID_AO_REMOTE] = &remote_ao.hw,
+		[CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw,
+		[CLKID_AO_I2C_SLAVE] = &i2c_slave_ao.hw,
+		[CLKID_AO_UART1] = &uart1_ao.hw,
+		[CLKID_AO_UART2] = &uart2_ao.hw,
+		[CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw,
+	},
+	.num = ARRAY_SIZE(gxbb_aoclk_gate),
+};
+
+static int gxbb_aoclkc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *base;
+	int ret, clkid;
+	struct device *dev = &pdev->dev;
+	struct gxbb_aoclk_reset_controller *rstc;
+
+	rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
+	if (!rstc)
+		return -ENOMEM;
+
+	/* Generic clocks */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	/* Reset Controller */
+	rstc->base = base;
+	rstc->data = gxbb_aoclk_reset;
+	rstc->reset.ops = &gxbb_aoclk_reset_ops;
+	rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset);
+	rstc->reset.of_node = dev->of_node;
+	ret = devm_reset_controller_register(dev, &rstc->reset);
+
+	/*
+	 * Populate base address and register all clks
+	 */
+	for (clkid = 0; clkid < gxbb_aoclk_onecell_data.num; clkid++) {
+		gxbb_aoclk_gate[clkid]->reg = base;
+
+		ret = devm_clk_hw_register(dev,
+					gxbb_aoclk_onecell_data.hws[clkid]);
+		if (ret)
+			return ret;
+	}
+
+	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+			&gxbb_aoclk_onecell_data);
+}
+
+static const struct of_device_id gxbb_aoclkc_match_table[] = {
+	{ .compatible = "amlogic,gxbb-aoclkc" },
+	{ }
+};
+
+static struct platform_driver gxbb_aoclkc_driver = {
+	.probe		= gxbb_aoclkc_probe,
+	.driver		= {
+		.name	= "gxbb-aoclkc",
+		.of_match_table = gxbb_aoclkc_match_table,
+	},
+};
+builtin_platform_driver(gxbb_aoclkc_driver);