From 3e401818c81bb9f8438d1c2a803471f441981329 Mon Sep 17 00:00:00 2001 From: "Russell King (Oracle)" Date: Thu, 20 Feb 2025 12:47:49 +0000 Subject: [PATCH] net: stmmac: print stmmac_init_dma_engine() errors using netdev_err() stmmac_init_dma_engine() uses dev_err() which leads to errors being reported as e.g: dwc-eth-dwmac 2490000.ethernet: Failed to reset the dma dwc-eth-dwmac 2490000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed stmmac_init_dma_engine() is only called from stmmac_hw_setup() which itself uses netdev_err(), and we will have a net_device setup. So, change the dev_err() to netdev_err() to give consistent error messages. Signed-off-by: Russell King (Oracle) Link: https://patch.msgid.link/E1tl5y1-004UgG-8X@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index edf4b1d651a6..424fa2fe31c6 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3047,7 +3047,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) int ret = 0; if (!priv->plat->dma_cfg || !priv->plat->dma_cfg->pbl) { - dev_err(priv->device, "Invalid DMA configuration\n"); + netdev_err(priv->dev, "Invalid DMA configuration\n"); return -EINVAL; } @@ -3056,7 +3056,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) ret = stmmac_reset(priv, priv->ioaddr); if (ret) { - dev_err(priv->device, "Failed to reset the dma\n"); + netdev_err(priv->dev, "Failed to reset the dma\n"); return ret; }