From 379e36d3f591cb62e781907edafea17d75e8c1fa Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Fri, 7 Sep 2018 10:18:51 +0200 Subject: [PATCH 1/8] ARM: dts: at91: sama5d2_ptc_ek: fix nand pinctrl The drive strength has to be set to medium otherwise some data corruption may happen. Signed-off-by: Ludovic Desroches Acked-by: Nicolas Ferre Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index b10dccd0958f3..3b1baa8605a77 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -11,6 +11,7 @@ #include "sama5d2-pinfunc.h" #include #include +#include / { model = "Atmel SAMA5D2 PTC EK"; @@ -299,6 +300,7 @@ , ; bias-pull-up; + atmel,drive-strength = ; }; ale_cle_rdy_cs { From 13b91ed77a65cf3bf23353880245d0cbd9138294 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Sun, 16 Sep 2018 12:34:09 +0800 Subject: [PATCH 2/8] ARM: dts: sun8i: drop A64 HDMI PHY fallback compatible from R40 DT The R40 HDMI PHY seems to be different to the A64 one, the A64 one has no input mux, but the R40 one has. Drop the A64 fallback compatible from the HDMI PHY node in R40 DT. Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard [wens@csie.org: Fix subject prefix order] Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-r40.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index ffd9f00f74a46..5f547c161bafd 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -800,8 +800,7 @@ }; hdmi_phy: hdmi-phy@1ef0000 { - compatible = "allwinner,sun8i-r40-hdmi-phy", - "allwinner,sun50i-a64-hdmi-phy"; + compatible = "allwinner,sun8i-r40-hdmi-phy"; reg = <0x01ef0000 0x10000>; clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>, <&ccu 7>, <&ccu 16>; From a4986b08287e0868fad6dd1b6e8ed840b2f1003f Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Wed, 19 Sep 2018 08:58:02 +0200 Subject: [PATCH 3/8] MAINTAINERS: update the Annapurna Labs maintainer email Free Electrons became Bootlin. Update my email accordingly. Signed-off-by: Antoine Tenart Signed-off-by: Olof Johansson --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index a5b256b259057..d8f42ec6d1c0b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1251,7 +1251,7 @@ N: meson ARM/Annapurna Labs ALPINE ARCHITECTURE M: Tsahee Zidenberg -M: Antoine Tenart +M: Antoine Tenart L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-alpine/ From 3ab97942d0213b6583a5408630a8cbbfbf54730f Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 19 Sep 2018 17:14:01 -0700 Subject: [PATCH 4/8] ARM: dts: BCM63xx: Fix incorrect interrupt specifiers A number of our interrupts were incorrectly specified, fix both the PPI and SPI interrupts to be correct. Fixes: b5762cacc411 ("ARM: bcm63138: add NAND DT support") Fixes: 46d4bca0445a ("ARM: BCM63XX: add BCM63138 minimal Device Tree") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm63138.dtsi | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index 43ee992ccdcf7..6df61518776f7 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -106,21 +106,23 @@ global_timer: timer@1e200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x1e200 0x20>; - interrupts = ; + interrupts = ; clocks = <&axi_clk>; }; local_timer: local-timer@1e600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x1e600 0x20>; - interrupts = ; + interrupts = ; clocks = <&axi_clk>; }; twd_watchdog: watchdog@1e620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0x1e620 0x20>; - interrupts = ; + interrupts = ; }; armpll: armpll { @@ -158,7 +160,7 @@ serial0: serial@600 { compatible = "brcm,bcm6345-uart"; reg = <0x600 0x1b>; - interrupts = ; + interrupts = ; clocks = <&periph_clk>; clock-names = "periph"; status = "disabled"; @@ -167,7 +169,7 @@ serial1: serial@620 { compatible = "brcm,bcm6345-uart"; reg = <0x620 0x1b>; - interrupts = ; + interrupts = ; clocks = <&periph_clk>; clock-names = "periph"; status = "disabled"; @@ -180,7 +182,7 @@ reg = <0x2000 0x600>, <0xf0 0x10>; reg-names = "nand", "nand-int-base"; status = "disabled"; - interrupts = ; + interrupts = ; interrupt-names = "nand"; }; From 64e9e22e68512da8df3c9a7430f07621e48db3c2 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Thu, 23 Aug 2018 23:36:00 +0200 Subject: [PATCH 5/8] soc: fsl: qbman: qman: avoid allocating from non existing gen_pool If the qman driver didn't probe, calling qman_alloc_fqid_range, qman_alloc_pool_range or qman_alloc_cgrid_range (as done in dpaa_eth) will pass a NULL pointer to gen_pool_alloc, leading to a NULL pointer dereference. Signed-off-by: Alexandre Belloni Reviewed-by: Roy Pledge Signed-off-by: Li Yang (cherry picked from commit f72487a2788aa70c3aee1d0ebd5470de9bac953a) Signed-off-by: Olof Johansson --- drivers/soc/fsl/qbman/qman.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/soc/fsl/qbman/qman.c b/drivers/soc/fsl/qbman/qman.c index ecb22749df0bf..8cc0151830433 100644 --- a/drivers/soc/fsl/qbman/qman.c +++ b/drivers/soc/fsl/qbman/qman.c @@ -2729,6 +2729,9 @@ static int qman_alloc_range(struct gen_pool *p, u32 *result, u32 cnt) { unsigned long addr; + if (!p) + return -ENODEV; + addr = gen_pool_alloc(p, cnt); if (!addr) return -ENOMEM; From 96fc74333f84cfdf8d434c6c07254e215e2aad00 Mon Sep 17 00:00:00 2001 From: Zhao Qiang Date: Thu, 1 Feb 2018 14:54:32 +0800 Subject: [PATCH 6/8] soc: fsl: qe: Fix copy/paste bug in ucc_get_tdm_sync_shift() There is a copy and paste bug so we accidentally use the RX_ shift when we're in TX_ mode. Fixes: bb8b2062aff3 ("fsl/qe: setup clock source for TDM mode") Signed-off-by: Dan Carpenter Signed-off-by: Zhao Qiang Signed-off-by: Li Yang (cherry picked from commit 3cb31b634052ed458922e0c8e2b4b093d7fb60b9) Signed-off-by: Olof Johansson --- drivers/soc/fsl/qe/ucc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soc/fsl/qe/ucc.c b/drivers/soc/fsl/qe/ucc.c index c646d87138613..681f7d4b7724f 100644 --- a/drivers/soc/fsl/qe/ucc.c +++ b/drivers/soc/fsl/qe/ucc.c @@ -626,7 +626,7 @@ static u32 ucc_get_tdm_sync_shift(enum comm_dir mode, u32 tdm_num) { u32 shift; - shift = (mode == COMM_DIR_RX) ? RX_SYNC_SHIFT_BASE : RX_SYNC_SHIFT_BASE; + shift = (mode == COMM_DIR_RX) ? RX_SYNC_SHIFT_BASE : TX_SYNC_SHIFT_BASE; shift -= tdm_num * 2; return shift; From 853dc104e6a43cba9a7a87542bc6d8e3b74f0bc9 Mon Sep 17 00:00:00 2001 From: Laurentiu Tudor Date: Wed, 26 Sep 2018 16:22:30 +0300 Subject: [PATCH 7/8] soc: fsl: qbman: add APIs to retrieve the probing status Add a couple of new APIs to check the probing status of qman and bman: 'int bman_is_probed()' and 'int qman_is_probed()'. They return the following values. * 1 if qman/bman were probed correctly * 0 if qman/bman were not yet probed * -1 if probing of qman/bman failed Drivers that use qman/bman driver services are required to use these APIs before calling any functions exported by qman or bman drivers or otherwise they will crash the kernel. The APIs will be used in the following couple of qbman portal patches and later in the series in the dpaa1 ethernet driver. Signed-off-by: Laurentiu Tudor Signed-off-by: Li Yang --- drivers/soc/fsl/qbman/bman_ccsr.c | 11 +++++++++++ drivers/soc/fsl/qbman/qman_ccsr.c | 11 +++++++++++ include/soc/fsl/bman.h | 8 ++++++++ include/soc/fsl/qman.h | 8 ++++++++ 4 files changed, 38 insertions(+) diff --git a/drivers/soc/fsl/qbman/bman_ccsr.c b/drivers/soc/fsl/qbman/bman_ccsr.c index 05c42235dd41d..7c3cc968053cd 100644 --- a/drivers/soc/fsl/qbman/bman_ccsr.c +++ b/drivers/soc/fsl/qbman/bman_ccsr.c @@ -120,6 +120,7 @@ static void bm_set_memory(u64 ba, u32 size) */ static dma_addr_t fbpr_a; static size_t fbpr_sz; +static int __bman_probed; static int bman_fbpr(struct reserved_mem *rmem) { @@ -166,6 +167,12 @@ static irqreturn_t bman_isr(int irq, void *ptr) return IRQ_HANDLED; } +int bman_is_probed(void) +{ + return __bman_probed; +} +EXPORT_SYMBOL_GPL(bman_is_probed); + static int fsl_bman_probe(struct platform_device *pdev) { int ret, err_irq; @@ -175,6 +182,8 @@ static int fsl_bman_probe(struct platform_device *pdev) u16 id, bm_pool_cnt; u8 major, minor; + __bman_probed = -1; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "Can't get %pOF property 'IORESOURCE_MEM'\n", @@ -255,6 +264,8 @@ static int fsl_bman_probe(struct platform_device *pdev) return ret; } + __bman_probed = 1; + return 0; }; diff --git a/drivers/soc/fsl/qbman/qman_ccsr.c b/drivers/soc/fsl/qbman/qman_ccsr.c index 79cba58387a58..6fd5fef5f39b3 100644 --- a/drivers/soc/fsl/qbman/qman_ccsr.c +++ b/drivers/soc/fsl/qbman/qman_ccsr.c @@ -273,6 +273,7 @@ static const struct qman_error_info_mdata error_mdata[] = { static u32 __iomem *qm_ccsr_start; /* A SDQCR mask comprising all the available/visible pool channels */ static u32 qm_pools_sdqcr; +static int __qman_probed; static inline u32 qm_ccsr_in(u32 offset) { @@ -686,6 +687,12 @@ static int qman_resource_init(struct device *dev) return 0; } +int qman_is_probed(void) +{ + return __qman_probed; +} +EXPORT_SYMBOL_GPL(qman_is_probed); + static int fsl_qman_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -695,6 +702,8 @@ static int fsl_qman_probe(struct platform_device *pdev) u16 id; u8 major, minor; + __qman_probed = -1; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "Can't get %pOF property 'IORESOURCE_MEM'\n", @@ -828,6 +837,8 @@ static int fsl_qman_probe(struct platform_device *pdev) if (ret) return ret; + __qman_probed = 1; + return 0; } diff --git a/include/soc/fsl/bman.h b/include/soc/fsl/bman.h index eaaf56df4086e..5b99cb2ea5ef9 100644 --- a/include/soc/fsl/bman.h +++ b/include/soc/fsl/bman.h @@ -126,4 +126,12 @@ int bman_release(struct bman_pool *pool, const struct bm_buffer *bufs, u8 num); */ int bman_acquire(struct bman_pool *pool, struct bm_buffer *bufs, u8 num); +/** + * bman_is_probed - Check if bman is probed + * + * Returns 1 if the bman driver successfully probed, -1 if the bman driver + * failed to probe or 0 if the bman driver did not probed yet. + */ +int bman_is_probed(void); + #endif /* __FSL_BMAN_H */ diff --git a/include/soc/fsl/qman.h b/include/soc/fsl/qman.h index d4dfefdee6c10..597783b8a3a07 100644 --- a/include/soc/fsl/qman.h +++ b/include/soc/fsl/qman.h @@ -1186,4 +1186,12 @@ int qman_alloc_cgrid_range(u32 *result, u32 count); */ int qman_release_cgrid(u32 id); +/** + * qman_is_probed - Check if qman is probed + * + * Returns 1 if the qman driver successfully probed, -1 if the qman driver + * failed to probe or 0 if the qman driver did not probed yet. + */ +int qman_is_probed(void); + #endif /* __FSL_QMAN_H */ From 5a1eb8b9542884592a018829bb1ff20c9695d925 Mon Sep 17 00:00:00 2001 From: Laurentiu Tudor Date: Wed, 26 Sep 2018 16:22:31 +0300 Subject: [PATCH 8/8] soc: fsl: qman_portals: defer probe after qman's probe Defer probe of qman portals after qman probing. This fixes the crash below, seen on NXP LS1043A SoCs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000004] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc1-next-20180622-00200-g986f5c179185 #9 Hardware name: LS1043A RDB Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : qman_set_sdest+0x74/0xa0 lr : qman_portal_probe+0x22c/0x470 sp : ffff00000803bbc0 x29: ffff00000803bbc0 x28: 0000000000000000 x27: ffff0000090c1b88 x26: ffff00000927cb68 x25: ffff00000927c000 x24: ffff00000927cb60 x23: 0000000000000000 x22: 0000000000000000 x21: ffff0000090e9000 x20: ffff800073b5c810 x19: ffff800027401298 x18: ffffffffffffffff x17: 0000000000000001 x16: 0000000000000000 x15: ffff0000090e96c8 x14: ffff80002740138a x13: ffff0000090f2000 x12: 0000000000000030 x11: ffff000008f25000 x10: 0000000000000000 x9 : ffff80007bdfd2c0 x8 : 0000000000004000 x7 : ffff80007393cc18 x6 : 0040000000000001 x5 : 0000000000000000 x4 : ffffffffffffffff x3 : 0000000000000004 x2 : ffff00000927c900 x1 : 0000000000000000 x0 : 0000000000000004 Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) Call trace: qman_set_sdest+0x74/0xa0 platform_drv_probe+0x50/0xa8 driver_probe_device+0x214/0x2f8 __driver_attach+0xd8/0xe0 bus_for_each_dev+0x68/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x108/0x228 driver_register+0x60/0x110 __platform_driver_register+0x40/0x48 qman_portal_driver_init+0x20/0x84 do_one_initcall+0x58/0x168 kernel_init_freeable+0x184/0x22c kernel_init+0x10/0x108 ret_from_fork+0x10/0x18 Code: f9400443 11001000 927e4800 8b000063 (b9400063) ---[ end trace 4f6d50489ecfb930 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Laurentiu Tudor Signed-off-by: Li Yang --- drivers/soc/fsl/qbman/qman_portal.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/soc/fsl/qbman/qman_portal.c b/drivers/soc/fsl/qbman/qman_portal.c index a120002b630ea..3e9391d117c54 100644 --- a/drivers/soc/fsl/qbman/qman_portal.c +++ b/drivers/soc/fsl/qbman/qman_portal.c @@ -227,6 +227,14 @@ static int qman_portal_probe(struct platform_device *pdev) int irq, cpu, err; u32 val; + err = qman_is_probed(); + if (!err) + return -EPROBE_DEFER; + if (err < 0) { + dev_err(&pdev->dev, "failing probe due to qman probe error\n"); + return -ENODEV; + } + pcfg = devm_kmalloc(dev, sizeof(*pcfg), GFP_KERNEL); if (!pcfg) return -ENOMEM;