From 05a974efa4bdf6e2a150e3f27dc6fcf0a9ad5655 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Thu, 15 Dec 2016 18:40:14 +0100 Subject: [PATCH 1/5] ieee802154: atusb: do not use the stack for buffers to make them DMA able From 4.9 we should really avoid using the stack here as this will not be DMA able on various platforms. This changes the buffers already being present in time of 4.9 being released. This should go into stable as well. Reported-by: Dan Carpenter Cc: stable@vger.kernel.org Signed-off-by: Stefan Schmidt Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/atusb.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c index 1253f864737ae..fa3e8c34b26c9 100644 --- a/drivers/net/ieee802154/atusb.c +++ b/drivers/net/ieee802154/atusb.c @@ -117,13 +117,26 @@ static int atusb_read_reg(struct atusb *atusb, uint8_t reg) { struct usb_device *usb_dev = atusb->usb_dev; int ret; + uint8_t *buffer; uint8_t value; + buffer = kmalloc(1, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + dev_dbg(&usb_dev->dev, "atusb: reg = 0x%x\n", reg); ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0), ATUSB_REG_READ, ATUSB_REQ_FROM_DEV, - 0, reg, &value, 1, 1000); - return ret >= 0 ? value : ret; + 0, reg, buffer, 1, 1000); + + if (ret >= 0) { + value = buffer[0]; + kfree(buffer); + return value; + } else { + kfree(buffer); + return ret; + } } static int atusb_write_subreg(struct atusb *atusb, uint8_t reg, uint8_t mask, @@ -608,9 +621,13 @@ static const struct ieee802154_ops atusb_ops = { static int atusb_get_and_show_revision(struct atusb *atusb) { struct usb_device *usb_dev = atusb->usb_dev; - unsigned char buffer[3]; + unsigned char *buffer; int ret; + buffer = kmalloc(3, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + /* Get a couple of the ATMega Firmware values */ ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0), ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0, @@ -631,15 +648,20 @@ static int atusb_get_and_show_revision(struct atusb *atusb) dev_info(&usb_dev->dev, "Please update to version 0.2 or newer"); } + kfree(buffer); return ret; } static int atusb_get_and_show_build(struct atusb *atusb) { struct usb_device *usb_dev = atusb->usb_dev; - char build[ATUSB_BUILD_SIZE + 1]; + char *build; int ret; + build = kmalloc(ATUSB_BUILD_SIZE + 1, GFP_KERNEL); + if (!build) + return -ENOMEM; + ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0), ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0, build, ATUSB_BUILD_SIZE, 1000); @@ -648,6 +670,7 @@ static int atusb_get_and_show_build(struct atusb *atusb) dev_info(&usb_dev->dev, "Firmware: build %s\n", build); } + kfree(build); return ret; } From 2fd2b550a5ed13b1d6640ff77630fc369636a544 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Thu, 15 Dec 2016 18:40:15 +0100 Subject: [PATCH 2/5] ieee802154: atusb: make sure we set a randaom extended address if fetching fails In the unlikely case were the firmware is new enough but the actual USB command still fails make sure we set a random address and return. Signed-off-by: Stefan Schmidt Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/atusb.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c index fa3e8c34b26c9..67790f88908da 100644 --- a/drivers/net/ieee802154/atusb.c +++ b/drivers/net/ieee802154/atusb.c @@ -737,8 +737,11 @@ static int atusb_set_extended_addr(struct atusb *atusb) ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0), ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0, buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000); - if (ret < 0) - dev_err(&usb_dev->dev, "failed to fetch extended address\n"); + if (ret < 0) { + dev_err(&usb_dev->dev, "failed to fetch extended address, random address set\n"); + ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr); + return ret; + } memcpy(&extended_addr, buffer, IEEE802154_EXTENDED_ADDR_LEN); /* Check if read address is not empty and the unicast bit is set correctly */ From 5eb35a6ccea61648a55713c076ab65423eea1ac0 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Thu, 15 Dec 2016 18:40:16 +0100 Subject: [PATCH 3/5] ieee802154: atusb: do not use the stack for address fetching to make it DMA able From 4.9 we should really avoid using the stack here as this will not be DMA able on various platforms. This changes a buffer that was introduced in the 4.10 merge window. Fixes: 6cc33eba232c ("ieee802154: atusb: try to read permanent extended address from device") Reported-by: Dan Carpenter Signed-off-by: Stefan Schmidt Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/atusb.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c index 67790f88908da..63cb67917a071 100644 --- a/drivers/net/ieee802154/atusb.c +++ b/drivers/net/ieee802154/atusb.c @@ -721,7 +721,7 @@ static int atusb_get_and_show_chip(struct atusb *atusb) static int atusb_set_extended_addr(struct atusb *atusb) { struct usb_device *usb_dev = atusb->usb_dev; - unsigned char buffer[IEEE802154_EXTENDED_ADDR_LEN]; + unsigned char *buffer; __le64 extended_addr; u64 addr; int ret; @@ -733,6 +733,10 @@ static int atusb_set_extended_addr(struct atusb *atusb) return 0; } + buffer = kmalloc(IEEE802154_EXTENDED_ADDR_LEN, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + /* Firmware is new enough so we fetch the address from EEPROM */ ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0), ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0, @@ -740,6 +744,7 @@ static int atusb_set_extended_addr(struct atusb *atusb) if (ret < 0) { dev_err(&usb_dev->dev, "failed to fetch extended address, random address set\n"); ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr); + kfree(buffer); return ret; } @@ -755,6 +760,7 @@ static int atusb_set_extended_addr(struct atusb *atusb) &addr); } + kfree(buffer); return ret; } From f301606934b240fb54d8edf3618a0483e36046fc Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Sun, 18 Dec 2016 15:25:33 -0800 Subject: [PATCH 4/5] at86rf230: Allow slow GPIO pins for "rstn" Driver code never touches "rstn" signal in atomic context, so there's no need to implicitly put such restriction on it by using gpio_set_value to manipulate it. Replace gpio_set_value to gpio_set_value_cansleep to fix that. As a an example of where such restriction might be inconvenient, consider a hardware design where "rstn" is connected to a pin of I2C/SPI GPIO expander chip. Cc: Chris Healy Signed-off-by: Andrey Smirnov Signed-off-by: Stefan Schmidt Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 46d53a6c8cf86..76ba7ecfe1429 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -1715,9 +1715,9 @@ static int at86rf230_probe(struct spi_device *spi) /* Reset */ if (gpio_is_valid(rstn)) { udelay(1); - gpio_set_value(rstn, 0); + gpio_set_value_cansleep(rstn, 0); udelay(1); - gpio_set_value(rstn, 1); + gpio_set_value_cansleep(rstn, 1); usleep_range(120, 240); } From 8e38b7d4d71479b23b77f01cf0e5071610b8f357 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Mon, 2 Jan 2017 16:58:13 +0100 Subject: [PATCH 5/5] ieee802154: atusb: fix driver to work with older firmware versions After the addition of the frame_retries callback we could run into cases where a ATUSB device with an older firmware version would now longer be able to bring the interface up. We keep this functionality disabled now if the minimum firmware version for this feature is not available. Fixes: 5d82288b93db3bc ("ieee802154: atusb: implement .set_frame_retries ops callback") Reported-by: Alexander Aring Acked-by: Alexander Aring Signed-off-by: Stefan Schmidt Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/atusb.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c index 63cb67917a071..ef688518ad77d 100644 --- a/drivers/net/ieee802154/atusb.c +++ b/drivers/net/ieee802154/atusb.c @@ -562,13 +562,6 @@ static int atusb_set_frame_retries(struct ieee802154_hw *hw, s8 retries) { struct atusb *atusb = hw->priv; - struct device *dev = &atusb->usb_dev->dev; - - if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 3) { - dev_info(dev, "Automatic frame retransmission is only available from " - "firmware version 0.3. Please update if you want this feature."); - return -EINVAL; - } return atusb_write_subreg(atusb, SR_MAX_FRAME_RETRIES, retries); } @@ -802,8 +795,7 @@ static int atusb_probe(struct usb_interface *interface, hw->parent = &usb_dev->dev; hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT | - IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS | - IEEE802154_HW_FRAME_RETRIES; + IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS; hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL | WPAN_PHY_FLAG_CCA_MODE; @@ -832,6 +824,9 @@ static int atusb_probe(struct usb_interface *interface, atusb_get_and_show_build(atusb); atusb_set_extended_addr(atusb); + if (atusb->fw_ver_maj >= 0 && atusb->fw_ver_min >= 3) + hw->flags |= IEEE802154_HW_FRAME_RETRIES; + ret = atusb_get_and_clear_error(atusb); if (ret) { dev_err(&atusb->usb_dev->dev,