backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c

pm8941-wled.c driver is supporting the WLED peripheral
on pm8941. Rename it to qcom-wled.c so that it can support
WLED on multiple PMICs.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt → Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt

@@ -1,4 +1,4 @@
-Binding for Qualcomm PM8941 WLED driver
+Binding for Qualcomm Technologies, Inc. WLED driver
 
 Required properties:
 - compatible: should be "qcom,pm8941-wled"

drivers/video/backlight/Kconfig

@@ -282,12 +282,12 @@ config BACKLIGHT_TOSA
 	  If you have an Sharp SL-6000 Zaurus say Y to enable a driver
 	  for its backlight
 
-config BACKLIGHT_PM8941_WLED
-	tristate "Qualcomm PM8941 WLED Driver"
+config BACKLIGHT_QCOM_WLED
+	tristate "Qualcomm PMIC WLED Driver"
 	select REGMAP
 	help
-	  If you have the Qualcomm PM8941, say Y to enable a driver for the
-	  WLED block.
+	  If you have the Qualcomm PMIC, say Y to enable a driver for the
+	  WLED block. Currently it supports PM8941 and PMI8998.
 
 config BACKLIGHT_SAHARA
 	tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"

drivers/video/backlight/Makefile

@@ -48,8 +48,8 @@ obj-$(CONFIG_BACKLIGHT_OMAP1)		+= omap1_bl.o
 obj-$(CONFIG_BACKLIGHT_OT200)		+= ot200_bl.o
 obj-$(CONFIG_BACKLIGHT_PANDORA)		+= pandora_bl.o
 obj-$(CONFIG_BACKLIGHT_PCF50633)	+= pcf50633-backlight.o
-obj-$(CONFIG_BACKLIGHT_PM8941_WLED)	+= pm8941-wled.o
 obj-$(CONFIG_BACKLIGHT_PWM)		+= pwm_bl.o
+obj-$(CONFIG_BACKLIGHT_QCOM_WLED)	+= qcom-wled.o
 obj-$(CONFIG_BACKLIGHT_SAHARA)		+= kb3886_bl.o
 obj-$(CONFIG_BACKLIGHT_SKY81452)	+= sky81452-backlight.o
 obj-$(CONFIG_BACKLIGHT_TOSA)		+= tosa_bl.o