diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index 72f39a9751b58..116bd789e568f 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -7,11 +7,10 @@
 
 #include <linux/clk.h>
 #include <linux/i2c.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/usb3503.h>
 #include <linux/regmap.h>
@@ -47,19 +46,19 @@ struct usb3503 {
 	struct device		*dev;
 	struct clk		*clk;
 	u8	port_off_mask;
-	int	gpio_intn;
-	int	gpio_reset;
-	int	gpio_connect;
+	struct gpio_desc	*intn;
+	struct gpio_desc 	*reset;
+	struct gpio_desc 	*connect;
 	bool	secondary_ref_clk;
 };
 
 static int usb3503_reset(struct usb3503 *hub, int state)
 {
-	if (!state && gpio_is_valid(hub->gpio_connect))
-		gpio_set_value_cansleep(hub->gpio_connect, 0);
+	if (!state && hub->connect)
+		gpiod_set_value_cansleep(hub->connect, 0);
 
-	if (gpio_is_valid(hub->gpio_reset))
-		gpio_set_value_cansleep(hub->gpio_reset, state);
+	if (hub->reset)
+		gpiod_set_value_cansleep(hub->reset, !state);
 
 	/* Wait T_HUBINIT == 4ms for hub logic to stabilize */
 	if (state)
@@ -115,8 +114,8 @@ static int usb3503_connect(struct usb3503 *hub)
 		}
 	}
 
-	if (gpio_is_valid(hub->gpio_connect))
-		gpio_set_value_cansleep(hub->gpio_connect, 1);
+	if (hub->connect)
+		gpiod_set_value_cansleep(hub->connect, 1);
 
 	hub->mode = USB3503_MODE_HUB;
 	dev_info(dev, "switched to HUB mode\n");
@@ -163,13 +162,11 @@ static int usb3503_probe(struct usb3503 *hub)
 	int err;
 	u32 mode = USB3503_MODE_HUB;
 	const u32 *property;
+	enum gpiod_flags flags;
 	int len;
 
 	if (pdata) {
 		hub->port_off_mask	= pdata->port_off_mask;
-		hub->gpio_intn		= pdata->gpio_intn;
-		hub->gpio_connect	= pdata->gpio_connect;
-		hub->gpio_reset		= pdata->gpio_reset;
 		hub->mode		= pdata->initial_mode;
 	} else if (np) {
 		u32 rate = 0;
@@ -230,59 +227,38 @@ static int usb3503_probe(struct usb3503 *hub)
 			}
 		}
 
-		hub->gpio_intn	= of_get_named_gpio(np, "intn-gpios", 0);
-		if (hub->gpio_intn == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-		hub->gpio_connect = of_get_named_gpio(np, "connect-gpios", 0);
-		if (hub->gpio_connect == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-		hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0);
-		if (hub->gpio_reset == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
 		of_property_read_u32(np, "initial-mode", &mode);
 		hub->mode = mode;
 	}
 
-	if (hub->port_off_mask && !hub->regmap)
-		dev_err(dev, "Ports disabled with no control interface\n");
-
-	if (gpio_is_valid(hub->gpio_intn)) {
-		int val = hub->secondary_ref_clk ? GPIOF_OUT_INIT_LOW :
-						   GPIOF_OUT_INIT_HIGH;
-		err = devm_gpio_request_one(dev, hub->gpio_intn, val,
-					    "usb3503 intn");
-		if (err) {
-			dev_err(dev,
-				"unable to request GPIO %d as interrupt pin (%d)\n",
-				hub->gpio_intn, err);
-			return err;
-		}
-	}
-
-	if (gpio_is_valid(hub->gpio_connect)) {
-		err = devm_gpio_request_one(dev, hub->gpio_connect,
-				GPIOF_OUT_INIT_LOW, "usb3503 connect");
-		if (err) {
-			dev_err(dev,
-				"unable to request GPIO %d as connect pin (%d)\n",
-				hub->gpio_connect, err);
-			return err;
-		}
-	}
-
-	if (gpio_is_valid(hub->gpio_reset)) {
-		err = devm_gpio_request_one(dev, hub->gpio_reset,
-				GPIOF_OUT_INIT_LOW, "usb3503 reset");
+	if (hub->secondary_ref_clk)
+		flags = GPIOD_OUT_LOW;
+	else
+		flags = GPIOD_OUT_HIGH;
+	hub->intn = devm_gpiod_get_optional(dev, "intn", flags);
+	if (IS_ERR(hub->intn))
+		return PTR_ERR(hub->intn);
+	if (hub->intn)
+		gpiod_set_consumer_name(hub->intn, "usb3503 intn");
+
+	hub->connect = devm_gpiod_get_optional(dev, "connect", GPIOD_OUT_LOW);
+	if (IS_ERR(hub->connect))
+		return PTR_ERR(hub->connect);
+	if (hub->connect)
+		gpiod_set_consumer_name(hub->connect, "usb3503 connect");
+
+	hub->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(hub->reset))
+		return PTR_ERR(hub->reset);
+	if (hub->reset) {
 		/* Datasheet defines a hardware reset to be at least 100us */
 		usleep_range(100, 10000);
-		if (err) {
-			dev_err(dev,
-				"unable to request GPIO %d as reset pin (%d)\n",
-				hub->gpio_reset, err);
-			return err;
-		}
+		gpiod_set_consumer_name(hub->reset, "usb3503 reset");
 	}
 
+	if (hub->port_off_mask && !hub->regmap)
+		dev_err(dev, "Ports disabled with no control interface\n");
+
 	usb3503_switch_mode(hub, hub->mode);
 
 	dev_info(dev, "%s: probed in %s mode\n", __func__,
diff --git a/include/linux/platform_data/usb3503.h b/include/linux/platform_data/usb3503.h
index e049d51c1353e..d01ef97ddf362 100644
--- a/include/linux/platform_data/usb3503.h
+++ b/include/linux/platform_data/usb3503.h
@@ -17,9 +17,6 @@ enum usb3503_mode {
 struct usb3503_platform_data {
 	enum usb3503_mode	initial_mode;
 	u8	port_off_mask;
-	int	gpio_intn;
-	int	gpio_connect;
-	int	gpio_reset;
 };
 
 #endif