From f11fa1796a4b4f8c6d4ced37e8824276ec57057d Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 10 Aug 2016 17:53:54 +0530 Subject: [PATCH 01/16] mfd: tps65218: add version check to the PMIC probe Version information will be needed to handle some error cases under the regulator driver, so store the information once during MFD probe. Signed-off-by: Tero Kristo Signed-off-by: Dave Gerlach Signed-off-by: Keerthy Acked-by: Lee Jones Signed-off-by: Mark Brown --- drivers/mfd/tps65218.c | 9 +++++++++ include/linux/mfd/tps65218.h | 1 + 2 files changed, 10 insertions(+) diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c index 80b9dc363cd85..ba610adbdbff3 100644 --- a/drivers/mfd/tps65218.c +++ b/drivers/mfd/tps65218.c @@ -219,6 +219,7 @@ static int tps65218_probe(struct i2c_client *client, struct tps65218 *tps; const struct of_device_id *match; int ret; + unsigned int chipid; match = of_match_device(of_tps65218_match_table, &client->dev); if (!match) { @@ -250,6 +251,14 @@ static int tps65218_probe(struct i2c_client *client, if (ret < 0) return ret; + ret = tps65218_reg_read(tps, TPS65218_REG_CHIPID, &chipid); + if (ret) { + dev_err(tps->dev, "Failed to read chipid: %d\n", ret); + return ret; + } + + tps->rev = chipid & TPS65218_CHIPID_REV_MASK; + ret = of_platform_populate(client->dev.of_node, NULL, NULL, &client->dev); if (ret < 0) diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h index 7fdf5326f34e1..85e464e32c437 100644 --- a/include/linux/mfd/tps65218.h +++ b/include/linux/mfd/tps65218.h @@ -267,6 +267,7 @@ struct tps_info { struct tps65218 { struct device *dev; unsigned int id; + u8 rev; struct mutex tps_lock; /* lock guarding the data structure */ /* IRQ Data */ From 23a34f9d03a5d40a6234855bc069da370708cc9e Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 10 Aug 2016 17:53:55 +0530 Subject: [PATCH 02/16] regulator: tps65218: do not disable DCDC3 during poweroff on broken PMICs Some versions of tps65218 do not seem to support poweroff modes properly if DCDC3 regulator is shut-down. Thus, keep it enabled even during poweroff if the version info matches the broken silicon revision. Signed-off-by: Tero Kristo Signed-off-by: Dave Gerlach Signed-off-by: Keerthy Acked-by: Lee Jones Signed-off-by: Mark Brown --- drivers/regulator/tps65218-regulator.c | 8 ++++++++ include/linux/mfd/tps65218.h | 5 +++++ 2 files changed, 13 insertions(+) diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c index d1e631d64a20a..eb0f5b13841a5 100644 --- a/drivers/regulator/tps65218-regulator.c +++ b/drivers/regulator/tps65218-regulator.c @@ -180,6 +180,14 @@ static int tps65218_pmic_set_suspend_disable(struct regulator_dev *dev) if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1) return -EINVAL; + /* + * Certain revisions of TPS65218 will need to have DCDC3 regulator + * enabled always, otherwise an immediate system reboot will occur + * during poweroff. + */ + if (rid == TPS65218_DCDC_3 && tps->rev == TPS65218_REV_2_1) + return 0; + if (!tps->info[rid]->strobe) { if (rid == TPS65218_DCDC_3) tps->info[rid]->strobe = 3; diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h index 85e464e32c437..d1db9527fab58 100644 --- a/include/linux/mfd/tps65218.h +++ b/include/linux/mfd/tps65218.h @@ -63,6 +63,11 @@ #define TPS65218_CHIPID_CHIP_MASK 0xF8 #define TPS65218_CHIPID_REV_MASK 0x07 +#define TPS65218_REV_1_0 0x0 +#define TPS65218_REV_1_1 0x1 +#define TPS65218_REV_2_0 0x2 +#define TPS65218_REV_2_1 0x3 + #define TPS65218_INT1_VPRG BIT(5) #define TPS65218_INT1_AC BIT(4) #define TPS65218_INT1_PB BIT(3) From 556ae220ac64b6564be8d76d855e26b65fcf75bf Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Mon, 15 Aug 2016 10:30:31 +0200 Subject: [PATCH 03/16] regulator: rk808: Delete owner assignment The field "owner" is set by core. Thus delete an extra initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Markus Elfring Signed-off-by: Mark Brown --- drivers/regulator/rk808-regulator.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c index 40d07ba036e7d..a6767494d39b1 100644 --- a/drivers/regulator/rk808-regulator.c +++ b/drivers/regulator/rk808-regulator.c @@ -533,8 +533,7 @@ static int rk808_regulator_probe(struct platform_device *pdev) static struct platform_driver rk808_regulator_driver = { .probe = rk808_regulator_probe, .driver = { - .name = "rk808-regulator", - .owner = THIS_MODULE, + .name = "rk808-regulator" }, }; From 37b918a034feda1b1ef404acf003812f37ab8da2 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 15 Aug 2016 12:40:23 -0700 Subject: [PATCH 04/16] regulator: Add LTC3676 support This patch adds support for the Linear Technology LTC3676 8-output I2C voltage regulator IC. Cc: Jaffer Kapasi Signed-off-by: Tim Harvey Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/ltc3676.txt | 94 ++++ drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/ltc3676.c | 420 ++++++++++++++++++ 4 files changed, 523 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/ltc3676.txt create mode 100644 drivers/regulator/ltc3676.c diff --git a/Documentation/devicetree/bindings/regulator/ltc3676.txt b/Documentation/devicetree/bindings/regulator/ltc3676.txt new file mode 100644 index 0000000000000..d4eb366ce18ce --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ltc3676.txt @@ -0,0 +1,94 @@ +Linear Technology LTC3676 8-output regulators + +Required properties: +- compatible: "lltc,ltc3676" +- reg: I2C slave address + +Required child node: +- regulators: Contains eight regulator child nodes sw1, sw2, sw3, sw4, + ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as + documented in Documentation/devicetree/bindings/regulator/regulator.txt. + +Each regulator is defined using the standard binding for regulators. The +nodes for sw1, sw2, sw3, sw4, ldo1, ldo2 and ldo4 additionally need to specify +the resistor values of their external feedback voltage dividers: + +Required properties (not on ldo3): +- lltc,fb-voltage-divider: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in ohms. + +Regulators sw1, sw2, sw3, sw4 can regulate the feedback reference from: +412.5mV to 800mV in 12.5 mV steps. The output voltage thus ranges between +0.4125 * (1 + R1/R2) V and 0.8 * (1 + R1/R2) V. + +Regulators ldo1, ldo2, and ldo4 have a fixed 0.725 V reference and thus output +0.725 * (1 + R1/R2) V. The ldo3 regulator is fixed to 1.8 V. The ldo1 standby +regulator can not be disabled and thus should have the regulator-always-on +property set. + +Example: + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + reg = <0x3c>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <1308000>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <200400>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <674400>; + regulator-max-microvolt = <130800>; + lltc,fb-voltage-divider = <127000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <168400>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <2490375>; + regulator-max-microvolt = <2490375>; + lltc,fb-voltage-divider = <487000 200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 6c88e31c01f7b..527bd6a51ef8a 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -353,6 +353,14 @@ config REGULATOR_LTC3589 This enables support for the LTC3589, LTC3589-1, and LTC3589-2 8-output regulators controlled via I2C. +config REGULATOR_LTC3676 + tristate "LTC3676 8-output voltage regulator" + depends on I2C + select REGMAP_I2C + help + This enables support for the LTC3676 + 8-output regulators controlled via I2C. + config REGULATOR_MAX14577 tristate "Maxim 14577/77836 regulator" depends on MFD_MAX14577 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index f3da9eea9ab6d..2142a5d3fc08c 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o +obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o diff --git a/drivers/regulator/ltc3676.c b/drivers/regulator/ltc3676.c new file mode 100644 index 0000000000000..e2b476ca2b4d6 --- /dev/null +++ b/drivers/regulator/ltc3676.c @@ -0,0 +1,420 @@ +/* + * Copyright (C) 2016 Gateworks Corporation, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "ltc3676" + +/* LTC3676 Registers */ +#define LTC3676_BUCK1 0x01 +#define LTC3676_BUCK2 0x02 +#define LTC3676_BUCK3 0x03 +#define LTC3676_BUCK4 0x04 +#define LTC3676_LDOA 0x05 +#define LTC3676_LDOB 0x06 +#define LTC3676_SQD1 0x07 +#define LTC3676_SQD2 0x08 +#define LTC3676_CNTRL 0x09 +#define LTC3676_DVB1A 0x0A +#define LTC3676_DVB1B 0x0B +#define LTC3676_DVB2A 0x0C +#define LTC3676_DVB2B 0x0D +#define LTC3676_DVB3A 0x0E +#define LTC3676_DVB3B 0x0F +#define LTC3676_DVB4A 0x10 +#define LTC3676_DVB4B 0x11 +#define LTC3676_MSKIRQ 0x12 +#define LTC3676_MSKPG 0x13 +#define LTC3676_USER 0x14 +#define LTC3676_IRQSTAT 0x15 +#define LTC3676_PGSTATL 0x16 +#define LTC3676_PGSTATRT 0x17 +#define LTC3676_HRST 0x1E +#define LTC3676_CLIRQ 0x1F + +#define LTC3676_DVBxA_REF_SELECT BIT(5) + +#define LTC3676_IRQSTAT_PGOOD_TIMEOUT BIT(3) +#define LTC3676_IRQSTAT_UNDERVOLT_WARN BIT(4) +#define LTC3676_IRQSTAT_UNDERVOLT_FAULT BIT(5) +#define LTC3676_IRQSTAT_THERMAL_WARN BIT(6) +#define LTC3676_IRQSTAT_THERMAL_FAULT BIT(7) + +enum ltc3676_reg { + LTC3676_SW1, + LTC3676_SW2, + LTC3676_SW3, + LTC3676_SW4, + LTC3676_LDO1, + LTC3676_LDO2, + LTC3676_LDO3, + LTC3676_LDO4, + LTC3676_NUM_REGULATORS, +}; + +struct ltc3676 { + struct regmap *regmap; + struct device *dev; + struct regulator_desc regulator_descs[LTC3676_NUM_REGULATORS]; + struct regulator_dev *regulators[LTC3676_NUM_REGULATORS]; +}; + +static int ltc3676_set_suspend_voltage(struct regulator_dev *rdev, int uV) +{ + struct ltc3676 *ltc3676 = rdev_get_drvdata(rdev); + struct device *dev = ltc3676->dev; + int dcdc = rdev_get_id(rdev); + int sel; + + dev_dbg(dev, "%s id=%d uV=%d\n", __func__, dcdc, uV); + sel = regulator_map_voltage_linear(rdev, uV, uV); + if (sel < 0) + return sel; + + /* DVBB register follows right after the corresponding DVBA register */ + return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg + 1, + rdev->desc->vsel_mask, sel); +} + +static int ltc3676_set_suspend_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct ltc3676 *ltc3676= rdev_get_drvdata(rdev); + struct device *dev = ltc3676->dev; + int mask, val; + int dcdc = rdev_get_id(rdev); + + dev_dbg(dev, "%s id=%d mode=%d\n", __func__, dcdc, mode); + + mask = LTC3676_DVBxA_REF_SELECT; + switch (mode) { + case REGULATOR_MODE_STANDBY: + val = 0; /* select DVBxA */ + break; + case REGULATOR_MODE_NORMAL: + val = LTC3676_DVBxA_REF_SELECT; /* select DVBxB */ + break; + default: + dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n", + rdev->desc->name, mode); + return -EINVAL; + } + + return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg, + mask, val); +} + +static inline unsigned int ltc3676_scale(unsigned int uV, u32 r1, u32 r2) +{ + uint64_t tmp; + if (uV == 0) + return 0; + tmp = (uint64_t)uV * r1; + do_div(tmp, r2); + return uV + (unsigned int)tmp; +} + +static int ltc3676_of_parse_cb(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + struct ltc3676 *ltc3676 = config->driver_data; + struct regulator_desc *rdesc = <c3676->regulator_descs[desc->id]; + u32 r[2]; + int ret; + + /* LDO3 has a fixed output */ + if (desc->id == LTC3676_LDO3) + return 0; + + ret = of_property_read_u32_array(np, "lltc,fb-voltage-divider", r, 2); + if (ret) { + dev_err(ltc3676->dev, "Failed to parse voltage divider: %d\n", + ret); + return ret; + } + + rdesc->min_uV = ltc3676_scale(desc->min_uV, r[0], r[1]); + rdesc->uV_step = ltc3676_scale(desc->uV_step, r[0], r[1]); + rdesc->fixed_uV = ltc3676_scale(desc->fixed_uV, r[0], r[1]); + + return 0; +} + +/* SW1, SW2, SW3, SW4 linear 0.8V-3.3V with scalar via R1/R2 feeback res */ +static struct regulator_ops ltc3676_linear_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_suspend_voltage = ltc3676_set_suspend_voltage, + .set_suspend_mode = ltc3676_set_suspend_mode, +}; + +/* LDO1 always on fixed 0.8V-3.3V via scalar via R1/R2 feeback res */ +static struct regulator_ops ltc3676_fixed_standby_regulator_ops = { +}; + +/* LDO2, LDO3 fixed (LDO2 has external scalar via R1/R2 feedback res) */ +static struct regulator_ops ltc3676_fixed_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +#define LTC3676_REG(_id, _name, _ops, en_reg, en_bit, dvba_reg, dvb_mask) \ + [LTC3676_ ## _id] = { \ + .name = #_name, \ + .of_match = of_match_ptr(#_name), \ + .regulators_node = of_match_ptr("regulators"), \ + .of_parse_cb = ltc3676_of_parse_cb, \ + .n_voltages = (dvb_mask) + 1, \ + .min_uV = (dvba_reg) ? 412500 : 0, \ + .uV_step = (dvba_reg) ? 12500 : 0, \ + .ramp_delay = (dvba_reg) ? 800 : 0, \ + .fixed_uV = (dvb_mask) ? 0 : 725000, \ + .ops = <c3676_ ## _ops ## _regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = LTC3676_ ## _id, \ + .owner = THIS_MODULE, \ + .vsel_reg = (dvba_reg), \ + .vsel_mask = (dvb_mask), \ + .enable_reg = (en_reg), \ + .enable_mask = (1 << en_bit), \ + } + +#define LTC3676_LINEAR_REG(_id, _name, _en, _dvba) \ + LTC3676_REG(_id, _name, linear, \ + LTC3676_ ## _en, 7, \ + LTC3676_ ## _dvba, 0x1f) + +#define LTC3676_FIXED_REG(_id, _name, _en_reg, _en_bit) \ + LTC3676_REG(_id, _name, fixed, LTC3676_ ## _en_reg, _en_bit, 0, 0) + +static struct regulator_desc ltc3676_regulators[LTC3676_NUM_REGULATORS] = { + LTC3676_LINEAR_REG(SW1, sw1, BUCK1, DVB1A), + LTC3676_LINEAR_REG(SW2, sw2, BUCK2, DVB2A), + LTC3676_LINEAR_REG(SW3, sw3, BUCK3, DVB3A), + LTC3676_LINEAR_REG(SW4, sw4, BUCK4, DVB4A), + LTC3676_REG(LDO1, ldo1, fixed_standby, 0, 0, 0, 0), + LTC3676_FIXED_REG(LDO2, ldo2, LDOA, 2), + LTC3676_FIXED_REG(LDO3, ldo3, LDOA, 5), + LTC3676_FIXED_REG(LDO4, ldo4, LDOB, 2), +}; + +static bool ltc3676_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTC3676_IRQSTAT: + case LTC3676_BUCK1: + case LTC3676_BUCK2: + case LTC3676_BUCK3: + case LTC3676_BUCK4: + case LTC3676_LDOA: + case LTC3676_LDOB: + case LTC3676_SQD1: + case LTC3676_SQD2: + case LTC3676_CNTRL: + case LTC3676_DVB1A: + case LTC3676_DVB1B: + case LTC3676_DVB2A: + case LTC3676_DVB2B: + case LTC3676_DVB3A: + case LTC3676_DVB3B: + case LTC3676_DVB4A: + case LTC3676_DVB4B: + case LTC3676_MSKIRQ: + case LTC3676_MSKPG: + case LTC3676_USER: + case LTC3676_HRST: + case LTC3676_CLIRQ: + return true; + } + return false; +} + +static bool ltc3676_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTC3676_IRQSTAT: + case LTC3676_BUCK1: + case LTC3676_BUCK2: + case LTC3676_BUCK3: + case LTC3676_BUCK4: + case LTC3676_LDOA: + case LTC3676_LDOB: + case LTC3676_SQD1: + case LTC3676_SQD2: + case LTC3676_CNTRL: + case LTC3676_DVB1A: + case LTC3676_DVB1B: + case LTC3676_DVB2A: + case LTC3676_DVB2B: + case LTC3676_DVB3A: + case LTC3676_DVB3B: + case LTC3676_DVB4A: + case LTC3676_DVB4B: + case LTC3676_MSKIRQ: + case LTC3676_MSKPG: + case LTC3676_USER: + case LTC3676_HRST: + case LTC3676_CLIRQ: + return true; + } + return false; +} + +static bool ltc3676_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LTC3676_IRQSTAT: + case LTC3676_PGSTATL: + case LTC3676_PGSTATRT: + return true; + } + return false; +} + +static const struct regmap_config ltc3676_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = ltc3676_writeable_reg, + .readable_reg = ltc3676_readable_reg, + .volatile_reg = ltc3676_volatile_reg, + .max_register = LTC3676_CLIRQ, + .use_single_rw = true, + .cache_type = REGCACHE_RBTREE, +}; + +static irqreturn_t ltc3676_isr(int irq, void *dev_id) +{ + struct ltc3676 *ltc3676 = dev_id; + struct device *dev = ltc3676->dev; + unsigned int i, irqstat, event; + + regmap_read(ltc3676->regmap, LTC3676_IRQSTAT, &irqstat); + + dev_dbg(dev, "irq%d irqstat=0x%02x\n", irq, irqstat); + if (irqstat & LTC3676_IRQSTAT_THERMAL_WARN) { + dev_warn(dev, "Over-temperature Warning\n"); + event = REGULATOR_EVENT_OVER_TEMP; + for (i = 0; i < LTC3676_NUM_REGULATORS; i++) + regulator_notifier_call_chain(ltc3676->regulators[i], + event, NULL); + } + + if (irqstat & LTC3676_IRQSTAT_UNDERVOLT_WARN) { + dev_info(dev, "Undervoltage Warning\n"); + event = REGULATOR_EVENT_UNDER_VOLTAGE; + for (i = 0; i < LTC3676_NUM_REGULATORS; i++) + regulator_notifier_call_chain(ltc3676->regulators[i], + event, NULL); + } + + /* Clear warning condition */ + regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0); + + return IRQ_HANDLED; +} + +static int ltc3676_regulator_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct regulator_init_data *init_data = dev_get_platdata(dev); + struct regulator_desc *descs; + struct ltc3676 *ltc3676; + int i, ret; + + ltc3676 = devm_kzalloc(dev, sizeof(*ltc3676), GFP_KERNEL); + if (!ltc3676) + return -ENOMEM; + + i2c_set_clientdata(client, ltc3676); + ltc3676->dev = dev; + + descs = ltc3676->regulator_descs; + memcpy(descs, ltc3676_regulators, sizeof(ltc3676_regulators)); + descs[LTC3676_LDO3].fixed_uV = 1800000; /* LDO3 is fixed 1.8V */ + + ltc3676->regmap = devm_regmap_init_i2c(client, <c3676_regmap_config); + if (IS_ERR(ltc3676->regmap)) { + ret = PTR_ERR(ltc3676->regmap); + dev_err(dev, "failed to initialize regmap: %d\n", ret); + return ret; + } + + for (i = 0; i < LTC3676_NUM_REGULATORS; i++) { + struct regulator_desc *desc = <c3676->regulator_descs[i]; + struct regulator_config config = { }; + + if (init_data) + config.init_data = &init_data[i]; + + config.dev = dev; + config.driver_data = ltc3676; + + ltc3676->regulators[i] = devm_regulator_register(dev, desc, + &config); + if (IS_ERR(ltc3676->regulators[i])) { + ret = PTR_ERR(ltc3676->regulators[i]); + dev_err(dev, "failed to register regulator %s: %d\n", + desc->name, ret); + return ret; + } + } + + regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0); + if (client->irq) { + ret = devm_request_threaded_irq(dev, client->irq, NULL, + ltc3676_isr, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + client->name, ltc3676); + if (ret) { + dev_err(dev, "Failed to request IRQ: %d\n", ret); + return ret; + } + } + + return 0; +} + +static const struct i2c_device_id ltc3676_i2c_id[] = { + { "ltc3676" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ltc3676_i2c_id); + +static struct i2c_driver ltc3676_driver = { + .driver = { + .name = DRIVER_NAME, + }, + .probe = ltc3676_regulator_probe, + .id_table = ltc3676_i2c_id, +}; +module_i2c_driver(ltc3676_driver); + +MODULE_AUTHOR("Tim Harvey "); +MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC1376"); +MODULE_LICENSE("GPL v2"); From 565f9b073f37e5cb6f80ad0ad71ec1144f87fd9f Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Tue, 16 Aug 2016 11:50:32 -0700 Subject: [PATCH 05/16] regulator: Remove support for optional supplies in the bulk API The patch was based on my missinterpretation of the API and only accidentally worked for me. Let's clean it out to not confuse others. This reverts commit 3ff3f518a135fa4592fe2817e9ac2cce1fa23dc2. Signed-off-by: Bjorn Andersson Signed-off-by: Mark Brown --- drivers/regulator/core.c | 6 ++---- drivers/regulator/devres.c | 7 ++----- include/linux/regulator/consumer.h | 3 --- 3 files changed, 4 insertions(+), 12 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index db320e8fa865f..8ccdaf89b1c35 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -3483,10 +3483,8 @@ int regulator_bulk_get(struct device *dev, int num_consumers, consumers[i].consumer = NULL; for (i = 0; i < num_consumers; i++) { - consumers[i].consumer = _regulator_get(dev, - consumers[i].supply, - false, - !consumers[i].optional); + consumers[i].consumer = regulator_get(dev, + consumers[i].supply); if (IS_ERR(consumers[i].consumer)) { ret = PTR_ERR(consumers[i].consumer); dev_err(dev, "Failed to get supply '%s': %d\n", diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c index 6ad8ab4c578d6..6ec1d400adae7 100644 --- a/drivers/regulator/devres.c +++ b/drivers/regulator/devres.c @@ -164,11 +164,8 @@ int devm_regulator_bulk_get(struct device *dev, int num_consumers, consumers[i].consumer = NULL; for (i = 0; i < num_consumers; i++) { - consumers[i].consumer = _devm_regulator_get(dev, - consumers[i].supply, - consumers[i].optional ? - OPTIONAL_GET : - NORMAL_GET); + consumers[i].consumer = devm_regulator_get(dev, + consumers[i].supply); if (IS_ERR(consumers[i].consumer)) { ret = PTR_ERR(consumers[i].consumer); dev_err(dev, "Failed to get supply '%s': %d\n", diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index cae500b2c1d71..692108222271a 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -140,8 +140,6 @@ struct regulator; * * @supply: The name of the supply. Initialised by the user before * using the bulk regulator APIs. - * @optional: The supply should be considered optional. Initialised by the user - * before using the bulk regulator APIs. * @consumer: The regulator consumer for the supply. This will be managed * by the bulk API. * @@ -151,7 +149,6 @@ struct regulator; */ struct regulator_bulk_data { const char *supply; - bool optional; struct regulator *consumer; /* private: Internal use */ From 1283b9121155dd25290d017fc1ae6e973e88c8b1 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 18 Aug 2016 12:31:16 -0300 Subject: [PATCH 06/16] regulator: bindings: Use the correct symbol for second The symbol for second is in lower case. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/regulator.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index ecfc593cac15b..6ab5aef619d9f 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -13,7 +13,7 @@ Optional properties: - regulator-allow-bypass: allow the regulator to go into bypass mode - regulator-allow-set-load: allow the regulator performance level to be configured - -supply: phandle to the parent supply/regulator node -- regulator-ramp-delay: ramp delay for regulator(in uV/uS) +- regulator-ramp-delay: ramp delay for regulator(in uV/us) For hardware which supports disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay. - regulator-enable-ramp-delay: The time taken, in microseconds, for the supply From 3b063496f0dc8eb5bf9c73ee72f9fb42157581ff Mon Sep 17 00:00:00 2001 From: Sebastiaan Schalbroeck Date: Mon, 22 Aug 2016 18:23:14 +0200 Subject: [PATCH 07/16] regulator: Kconfig: Fix typo Fix typo in regulator Kconfig for the TPS80031 tristate string (trivial) Signed-off-by: Sebastiaan Schalbroeck Signed-off-by: Mark Brown --- drivers/regulator/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 6c88e31c01f7b..cfb322384505b 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -820,7 +820,7 @@ config REGULATOR_TPS65912 This driver supports TPS65912 voltage regulator chip. config REGULATOR_TPS80031 - tristate "TI TPS80031/TPS80032 power regualtor driver" + tristate "TI TPS80031/TPS80032 power regulator driver" depends on MFD_TPS80031 help TPS80031/ TPS80032 Fully Integrated Power Management with Power From ea2f7321a9029194a31ff9f798a8276d45747bcd Mon Sep 17 00:00:00 2001 From: Baoyou Xie Date: Wed, 31 Aug 2016 17:30:31 +0800 Subject: [PATCH 08/16] regulator: hi6421: mark hi6421_regulator_ldo_get_optimum_mode() static We get 1 warning when building kernel with W=1: drivers/regulator/hi6421-regulator.c:480:14: warning: no previous prototype for 'hi6421_regulator_ldo_get_optimum_mode' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. So this patch marks it 'static'. Signed-off-by: Baoyou Xie Acked-by: Arnd Bergmann Signed-off-by: Mark Brown --- drivers/regulator/hi6421-regulator.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c index 42dc5fb8c899a..62c5f5445d442 100644 --- a/drivers/regulator/hi6421-regulator.c +++ b/drivers/regulator/hi6421-regulator.c @@ -477,7 +477,8 @@ static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev, return 0; } -unsigned int hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev, +static unsigned int +hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev, int input_uV, int output_uV, int load_uA) { struct hi6421_regulator_info *info = rdev_get_drvdata(rdev); From 57995a4860542ea2089558c84f739e12d5ca1059 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Wed, 14 Sep 2016 09:52:05 -0700 Subject: [PATCH 09/16] regulator: core: Use local ops variable in _regulator_do_set_voltage() Signed-off-by: Matthias Kaehlcke Signed-off-by: Mark Brown --- drivers/regulator/core.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index db320e8fa865f..b059e8334567d 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2751,6 +2751,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, int best_val = 0; unsigned int selector; int old_selector = -1; + const struct regulator_ops *ops = rdev->desc->ops; trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV); @@ -2762,29 +2763,28 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, * info to call set_voltage_time_sel(). */ if (_regulator_is_enabled(rdev) && - rdev->desc->ops->set_voltage_time_sel && - rdev->desc->ops->get_voltage_sel) { - old_selector = rdev->desc->ops->get_voltage_sel(rdev); + ops->set_voltage_time_sel && ops->get_voltage_sel) { + old_selector = ops->get_voltage_sel(rdev); if (old_selector < 0) return old_selector; } - if (rdev->desc->ops->set_voltage) { + if (ops->set_voltage) { ret = _regulator_call_set_voltage(rdev, min_uV, max_uV, &selector); if (ret >= 0) { - if (rdev->desc->ops->list_voltage) - best_val = rdev->desc->ops->list_voltage(rdev, - selector); + if (ops->list_voltage) + best_val = ops->list_voltage(rdev, + selector); else best_val = _regulator_get_voltage(rdev); } - } else if (rdev->desc->ops->set_voltage_sel) { + } else if (ops->set_voltage_sel) { ret = regulator_map_voltage(rdev, min_uV, max_uV); if (ret >= 0) { - best_val = rdev->desc->ops->list_voltage(rdev, ret); + best_val = ops->list_voltage(rdev, ret); if (min_uV <= best_val && max_uV >= best_val) { selector = ret; if (old_selector == selector) @@ -2804,7 +2804,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, if (ret == 0 && !rdev->constraints->ramp_disable && old_selector >= 0 && old_selector != selector) { - delay = rdev->desc->ops->set_voltage_time_sel(rdev, + delay = ops->set_voltage_time_sel(rdev, old_selector, selector); if (delay < 0) { rdev_warn(rdev, "set_voltage_time_sel() failed: %d\n", From 31dfe686ed0ba5a796bcfc5a6745e77ddb5daa4e Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Wed, 14 Sep 2016 09:52:06 -0700 Subject: [PATCH 10/16] regulator: core: Simplify error flow in _regulator_do_set_voltage() If the voltage can not be set jump to the end of the function. This avoids having to check for an error multiple times and eliminates one level of nesting in a follow-up change. Signed-off-by: Matthias Kaehlcke Signed-off-by: Mark Brown --- drivers/regulator/core.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index b059e8334567d..b0076ccf896bb 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2800,8 +2800,11 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, ret = -EINVAL; } + if (ret) + goto out; + /* Call set_voltage_time_sel if successfully obtained old_selector */ - if (ret == 0 && !rdev->constraints->ramp_disable && old_selector >= 0 + if (!rdev->constraints->ramp_disable && old_selector >= 0 && old_selector != selector) { delay = ops->set_voltage_time_sel(rdev, @@ -2821,13 +2824,14 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, } } - if (ret == 0 && best_val >= 0) { + if (best_val >= 0) { unsigned long data = best_val; _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE, (void *)data); } +out: trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val); return ret; From d89564efe79419a093e966a959bf5ba2c94e693f Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Wed, 14 Sep 2016 09:52:07 -0700 Subject: [PATCH 11/16] regulator: core: Don't skip set_voltage_time when ramp delay disabled The current code assumes that only the ramp_delay is used to determine the time needed for the voltage to stabilize. This may be true for the calculation done by regulator_set_voltage_time_sel(), however regulators can implement their own set_voltage_time_sel() op which would be skipped if no ramp delay is specified. Remove the check in _regulator_do_set_voltage(), the functions calculating the ramp delay return 0 anyway when the ramp delay is not configured. Signed-off-by: Matthias Kaehlcke Signed-off-by: Mark Brown --- drivers/regulator/core.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index b0076ccf896bb..df3028b2a8e9e 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2804,9 +2804,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, goto out; /* Call set_voltage_time_sel if successfully obtained old_selector */ - if (!rdev->constraints->ramp_disable && old_selector >= 0 - && old_selector != selector) { - + if (!old_selector >= 0 && old_selector != selector) { delay = ops->set_voltage_time_sel(rdev, old_selector, selector); if (delay < 0) { @@ -3051,10 +3049,8 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev, else if (rdev->desc->ramp_delay) ramp_delay = rdev->desc->ramp_delay; - if (ramp_delay == 0) { - rdev_warn(rdev, "ramp_delay not set\n"); + if (ramp_delay == 0) return 0; - } /* sanity check */ if (!rdev->desc->ops->list_voltage) From 73e705bf81ceb84b39ef9cf6ffb8d12ca0c58a23 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Wed, 14 Sep 2016 09:52:08 -0700 Subject: [PATCH 12/16] regulator: core: Add set_voltage_time op The new op is analogous to set_voltage_time_sel. It can be used by regulators which don't have a table of discrete voltages. The function returns the time for the regulator output voltage to stabilize after being set to a new value, in microseconds. If the op is not set a default implementation is used to calculate the delay. This change also removes the ramp_delay calculation in the PWM regulator, since the driver now uses the core code for the calculation of the delay. Signed-off-by: Matthias Kaehlcke Signed-off-by: Mark Brown --- drivers/regulator/core.c | 86 +++++++++++++++++++++---------- drivers/regulator/pwm-regulator.c | 10 ---- include/linux/regulator/driver.h | 10 +++- 3 files changed, 67 insertions(+), 39 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index df3028b2a8e9e..c52fc0ce26934 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2743,6 +2743,24 @@ static int _regulator_call_set_voltage_sel(struct regulator_dev *rdev, return ret; } +static int _regulator_set_voltage_time(struct regulator_dev *rdev, + int old_uV, int new_uV) +{ + unsigned int ramp_delay = 0; + + if (rdev->constraints->ramp_delay) + ramp_delay = rdev->constraints->ramp_delay; + else if (rdev->desc->ramp_delay) + ramp_delay = rdev->desc->ramp_delay; + + if (ramp_delay == 0) { + rdev_warn(rdev, "ramp_delay not set\n"); + return 0; + } + + return DIV_ROUND_UP(abs(new_uV - old_uV), ramp_delay); +} + static int _regulator_do_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { @@ -2752,6 +2770,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, unsigned int selector; int old_selector = -1; const struct regulator_ops *ops = rdev->desc->ops; + int old_uV = _regulator_get_voltage(rdev); trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV); @@ -2803,23 +2822,37 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, if (ret) goto out; - /* Call set_voltage_time_sel if successfully obtained old_selector */ - if (!old_selector >= 0 && old_selector != selector) { - delay = ops->set_voltage_time_sel(rdev, - old_selector, selector); - if (delay < 0) { - rdev_warn(rdev, "set_voltage_time_sel() failed: %d\n", - delay); - delay = 0; + if (ops->set_voltage_time_sel) { + /* + * Call set_voltage_time_sel if successfully obtained + * old_selector + */ + if (old_selector >= 0 && old_selector != selector) + delay = ops->set_voltage_time_sel(rdev, old_selector, + selector); + } else { + if (old_uV != best_val) { + if (ops->set_voltage_time) + delay = ops->set_voltage_time(rdev, old_uV, + best_val); + else + delay = _regulator_set_voltage_time(rdev, + old_uV, + best_val); } + } - /* Insert any necessary delays */ - if (delay >= 1000) { - mdelay(delay / 1000); - udelay(delay % 1000); - } else if (delay) { - udelay(delay); - } + if (delay < 0) { + rdev_warn(rdev, "failed to get delay: %d\n", delay); + delay = 0; + } + + /* Insert any necessary delays */ + if (delay >= 1000) { + mdelay(delay / 1000); + udelay(delay % 1000); + } else if (delay) { + udelay(delay); } if (best_val >= 0) { @@ -3000,9 +3033,13 @@ int regulator_set_voltage_time(struct regulator *regulator, int voltage; int i; + if (ops->set_voltage_time) + return ops->set_voltage_time(rdev, old_uV, new_uV); + else if (!ops->set_voltage_time_sel) + return _regulator_set_voltage_time(rdev, old_uV, new_uV); + /* Currently requires operations to do this */ - if (!ops->list_voltage || !ops->set_voltage_time_sel - || !rdev->desc->n_voltages) + if (!ops->list_voltage || !rdev->desc->n_voltages) return -EINVAL; for (i = 0; i < rdev->desc->n_voltages; i++) { @@ -3041,17 +3078,8 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev, unsigned int old_selector, unsigned int new_selector) { - unsigned int ramp_delay = 0; int old_volt, new_volt; - if (rdev->constraints->ramp_delay) - ramp_delay = rdev->constraints->ramp_delay; - else if (rdev->desc->ramp_delay) - ramp_delay = rdev->desc->ramp_delay; - - if (ramp_delay == 0) - return 0; - /* sanity check */ if (!rdev->desc->ops->list_voltage) return -EINVAL; @@ -3059,7 +3087,11 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev, old_volt = rdev->desc->ops->list_voltage(rdev, old_selector); new_volt = rdev->desc->ops->list_voltage(rdev, new_selector); - return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay); + if (rdev->desc->ops->set_voltage_time) + return rdev->desc->ops->set_voltage_time(rdev, old_volt, + new_volt); + else + return _regulator_set_voltage_time(rdev, old_volt, new_volt); } EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel); diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index c24524242da21..1b88e0e15a70c 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -10,7 +10,6 @@ * published by the Free Software Foundation. */ -#include #include #include #include @@ -194,12 +193,10 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev, unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle; unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle; unsigned int duty_unit = drvdata->continuous.dutycycle_unit; - unsigned int ramp_delay = rdev->constraints->ramp_delay; int min_uV = rdev->constraints->min_uV; int max_uV = rdev->constraints->max_uV; int diff_uV = max_uV - min_uV; struct pwm_state pstate; - int old_uV = pwm_regulator_get_voltage(rdev); unsigned int diff_duty; unsigned int dutycycle; int ret; @@ -233,13 +230,6 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev, return ret; } - if ((ramp_delay == 0) || !pwm_regulator_is_enabled(rdev)) - return 0; - - /* Ramp delay is in uV/uS. Adjust to uS and delay */ - ramp_delay = DIV_ROUND_UP(abs(req_min_uV - old_uV), ramp_delay); - usleep_range(ramp_delay, ramp_delay + DIV_ROUND_UP(ramp_delay, 10)); - return 0; } diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index fcfa40a6692cf..37b5324105287 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -113,10 +113,14 @@ struct regulator_linear_range { * stabilise after being enabled, in microseconds. * @set_ramp_delay: Set the ramp delay for the regulator. The driver should * select ramp delay equal to or less than(closest) ramp_delay. + * @set_voltage_time: Time taken for the regulator voltage output voltage + * to stabilise after being set to a new value, in microseconds. + * The function receives the from and to voltage as input, it + * should return the worst case. * @set_voltage_time_sel: Time taken for the regulator voltage output voltage * to stabilise after being set to a new value, in microseconds. - * The function provides the from and to voltage selector, the - * function should return the worst case. + * The function receives the from and to voltage selector as + * input, it should return the worst case. * @set_soft_start: Enable soft start for the regulator. * * @set_suspend_voltage: Set the voltage for the regulator when the system @@ -168,6 +172,8 @@ struct regulator_ops { /* Time taken to enable or set voltage on the regulator */ int (*enable_time) (struct regulator_dev *); int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay); + int (*set_voltage_time) (struct regulator_dev *, int old_uV, + int new_uV); int (*set_voltage_time_sel) (struct regulator_dev *, unsigned int old_selector, unsigned int new_selector); From 8f9165c981fed187bb483de84caf9adf835aefda Mon Sep 17 00:00:00 2001 From: Jan Remmet Date: Fri, 23 Sep 2016 10:52:00 +0200 Subject: [PATCH 13/16] regulator: tps65910: Work around silicon erratum SWCZ010 http://www.ti.com/lit/pdf/SWCZ010: DCDC o/p voltage can go higher than programmed value Impact: VDDI, VDD2, and VIO output programmed voltage level can go higher than expected or crash, when coming out of PFM to PWM mode or using DVFS. Description: When DCDC CLK SYNC bits are 11/01: * VIO 3-MHz oscillator is the source clock of the digital core and input clock of VDD1 and VDD2 * Turn-on of VDD1 and VDD2 HSD PFETis synchronized or at a constant phase shift * Current pulled though VCC1+VCC2 is Iload(VDD1) + Iload(VDD2) * The 3 HSD PFET will be turned-on at the same time, causing the highest possible switching noise on the application. This noise level depends on the layout, the VBAT level, and the load current. The noise level increases with improper layout. When DCDC CLK SYNC bits are 00: * VIO 3-MHz oscillator is the source clock of digital core * VDD1 and VDD2 are running on their own 3-MHz oscillator * Current pulled though VCC1+VCC2 average of Iload(VDD1) + Iload(VDD2) * The switching noise of the 3 SMPS will be randomly spread over time, causing lower overall switching noise. Workaround: Set DCDCCTRL_REG[1:0]= 00. Signed-off-by: Jan Remmet Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/tps65910-regulator.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index fb991ec764235..696116ebdf50a 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -1111,6 +1111,12 @@ static int tps65910_probe(struct platform_device *pdev) pmic->num_regulators = ARRAY_SIZE(tps65910_regs); pmic->ext_sleep_control = tps65910_ext_sleep_control; info = tps65910_regs; + /* Work around silicon erratum SWCZ010: output programmed + * voltage level can go higher than expected or crash + * Workaround: use no synchronization of DCDC clocks + */ + tps65910_reg_clear_bits(pmic->mfd, TPS65910_DCDCCTRL, + DCDCCTRL_DCDCCKSYNC_MASK); break; case TPS65911: pmic->get_ctrl_reg = &tps65911_get_ctrl_register; From 577766175c40d4f425be47b9e70d80238e53f996 Mon Sep 17 00:00:00 2001 From: Joonwoo Park Date: Mon, 19 Sep 2016 14:46:54 -0700 Subject: [PATCH 14/16] regulator: core: don't return error with inadequate reason drms_uA_update() always returns failure when it cannot find regulator's input voltage. But if hardware supports load configuration with ops->set_load() and the input regulator isn't specified with valid reason such as the input regulator is battery, not finding input voltage is normal so such case should not return with an error. Avoid such inadequate error return by checking input/output voltages only when drms_uA_update() is about to configure load with enum based ops->set_mode(). Cc: Liam Girdwood Cc: Mark Brown Cc: Bjorn Andersson Cc: linux-kernel@vger.kernel.org Signed-off-by: Joonwoo Park Signed-off-by: Mark Brown --- drivers/regulator/core.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index db320e8fa865f..bafcdff428729 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -679,24 +679,6 @@ static int drms_uA_update(struct regulator_dev *rdev) !rdev->desc->ops->set_load) return -EINVAL; - /* get output voltage */ - output_uV = _regulator_get_voltage(rdev); - if (output_uV <= 0) { - rdev_err(rdev, "invalid output voltage found\n"); - return -EINVAL; - } - - /* get input voltage */ - input_uV = 0; - if (rdev->supply) - input_uV = regulator_get_voltage(rdev->supply); - if (input_uV <= 0) - input_uV = rdev->constraints->input_uV; - if (input_uV <= 0) { - rdev_err(rdev, "invalid input voltage found\n"); - return -EINVAL; - } - /* calc total requested load */ list_for_each_entry(sibling, &rdev->consumer_list, list) current_uA += sibling->uA_load; @@ -709,6 +691,24 @@ static int drms_uA_update(struct regulator_dev *rdev) if (err < 0) rdev_err(rdev, "failed to set load %d\n", current_uA); } else { + /* get output voltage */ + output_uV = _regulator_get_voltage(rdev); + if (output_uV <= 0) { + rdev_err(rdev, "invalid output voltage found\n"); + return -EINVAL; + } + + /* get input voltage */ + input_uV = 0; + if (rdev->supply) + input_uV = regulator_get_voltage(rdev->supply); + if (input_uV <= 0) + input_uV = rdev->constraints->input_uV; + if (input_uV <= 0) { + rdev_err(rdev, "invalid input voltage found\n"); + return -EINVAL; + } + /* now get the optimum mode for our new total regulator load */ mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, output_uV, current_uA); From 5ff00f6aa84b7f4203f525fc6c4a4291e32c314d Mon Sep 17 00:00:00 2001 From: Eric Jeong Date: Mon, 26 Sep 2016 16:33:27 +0900 Subject: [PATCH 15/16] regulator: pv88080: Update regulator for PV88080 BB silicon support Three files are modified, the driver, header file and the binding document. Updates for the regulator source file include and .of_match_table entry and node match checking in the probe() function for a compatible pv88080 silicon type. A new "HVBUCK" is added in source file and added regsiter definition in header file for pv88080 bb silicion. The binding documentation changes have been made to reflect these updates. Signed-off-by: Eric Jeong Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/pv88080.txt | 23 +- drivers/regulator/pv88080-regulator.c | 263 ++++++++++++++++-- drivers/regulator/pv88080-regulator.h | 114 +++++--- 3 files changed, 322 insertions(+), 78 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/pv88080.txt b/Documentation/devicetree/bindings/regulator/pv88080.txt index 38a614210dcb1..e6e4b9c82d890 100644 --- a/Documentation/devicetree/bindings/regulator/pv88080.txt +++ b/Documentation/devicetree/bindings/regulator/pv88080.txt @@ -1,22 +1,28 @@ * Powerventure Semiconductor PV88080 Voltage Regulator Required properties: -- compatible: "pvs,pv88080". -- reg: I2C slave address, usually 0x49. +- compatible: Must be one of the following, depending on the + silicon version: + - "pvs,pv88080" (DEPRECATED) + + - "pvs,pv88080-aa" for PV88080 AA or AB silicon + - "pvs,pv88080-ba" for PV88080 BA or BB silicon + NOTE: The use of the compatibles with no silicon version is deprecated. +- reg: I2C slave address, usually 0x49 - interrupts: the interrupt outputs of the controller - regulators: A node that houses a sub-node for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed below. The content of each sub-node is defined by the standard binding for regulators; see regulator.txt. - BUCK1, BUCK2, and BUCK3. + BUCK1, BUCK2, BUCK3 and HVBUCK. Optional properties: - Any optional property defined in regulator.txt -Example +Example: pmic: pv88080@49 { - compatible = "pvs,pv88080"; + compatible = "pvs,pv88080-ba"; reg = <0x49>; interrupt-parent = <&gpio>; interrupts = <24 24>; @@ -45,5 +51,12 @@ Example regulator-min-microamp = <1496000>; regulator-max-microamp = <4189000>; }; + + HVBUCK { + regulator-name = "hvbuck"; + regulator-min-microvolt = < 5000>; + regulator-max-microvolt = <1275000>; + }; }; }; + diff --git a/drivers/regulator/pv88080-regulator.c b/drivers/regulator/pv88080-regulator.c index 81950bdb1cc42..954a20eeb26f8 100644 --- a/drivers/regulator/pv88080-regulator.c +++ b/drivers/regulator/pv88080-regulator.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -26,7 +27,7 @@ #include #include "pv88080-regulator.h" -#define PV88080_MAX_REGULATORS 3 +#define PV88080_MAX_REGULATORS 4 /* PV88080 REGULATOR IDs */ enum { @@ -34,6 +35,12 @@ enum { PV88080_ID_BUCK1, PV88080_ID_BUCK2, PV88080_ID_BUCK3, + PV88080_ID_HVBUCK, +}; + +enum pv88080_types { + TYPE_PV88080_AA, + TYPE_PV88080_BA, }; struct pv88080_regulator { @@ -42,7 +49,8 @@ struct pv88080_regulator { unsigned int n_current_limits; const int *current_limits; unsigned int limit_mask; - unsigned int conf; + unsigned int mode_reg; + unsigned int limit_reg; unsigned int conf2; unsigned int conf5; }; @@ -51,6 +59,8 @@ struct pv88080 { struct device *dev; struct regmap *regmap; struct regulator_dev *rdev[PV88080_MAX_REGULATORS]; + unsigned long type; + const struct pv88080_compatible_regmap *regmap_config; }; struct pv88080_buck_voltage { @@ -59,6 +69,30 @@ struct pv88080_buck_voltage { int uV_step; }; +struct pv88080_buck_regmap { + /* REGS */ + int buck_enable_reg; + int buck_vsel_reg; + int buck_mode_reg; + int buck_limit_reg; + int buck_vdac_range_reg; + int buck_vrange_gain_reg; + /* MASKS */ + int buck_enable_mask; + int buck_vsel_mask; + int buck_limit_mask; +}; + +struct pv88080_compatible_regmap { + /* BUCK1, 2, 3 */ + struct pv88080_buck_regmap buck_regmap[PV88080_MAX_REGULATORS-1]; + /* HVBUCK */ + int hvbuck_enable_reg; + int hvbuck_vsel_reg; + int hvbuck_enable_mask; + int hvbuck_vsel_mask; +}; + static const struct regmap_config pv88080_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -89,13 +123,111 @@ static const struct pv88080_buck_voltage pv88080_buck_vol[2] = { }, }; +static const struct pv88080_compatible_regmap pv88080_aa_regs = { + /* BUCK1 */ + .buck_regmap[0] = { + .buck_enable_reg = PV88080AA_REG_BUCK1_CONF0, + .buck_vsel_reg = PV88080AA_REG_BUCK1_CONF0, + .buck_mode_reg = PV88080AA_REG_BUCK1_CONF1, + .buck_limit_reg = PV88080AA_REG_BUCK1_CONF1, + .buck_vdac_range_reg = PV88080AA_REG_BUCK1_CONF2, + .buck_vrange_gain_reg = PV88080AA_REG_BUCK1_CONF5, + .buck_enable_mask = PV88080_BUCK1_EN, + .buck_vsel_mask = PV88080_VBUCK1_MASK, + .buck_limit_mask = PV88080_BUCK1_ILIM_MASK, + }, + /* BUCK2 */ + .buck_regmap[1] = { + .buck_enable_reg = PV88080AA_REG_BUCK2_CONF0, + .buck_vsel_reg = PV88080AA_REG_BUCK2_CONF0, + .buck_mode_reg = PV88080AA_REG_BUCK2_CONF1, + .buck_limit_reg = PV88080AA_REG_BUCK2_CONF1, + .buck_vdac_range_reg = PV88080AA_REG_BUCK2_CONF2, + .buck_vrange_gain_reg = PV88080AA_REG_BUCK2_CONF5, + .buck_enable_mask = PV88080_BUCK2_EN, + .buck_vsel_mask = PV88080_VBUCK2_MASK, + .buck_limit_mask = PV88080_BUCK2_ILIM_MASK, + }, + /* BUCK3 */ + .buck_regmap[2] = { + .buck_enable_reg = PV88080AA_REG_BUCK3_CONF0, + .buck_vsel_reg = PV88080AA_REG_BUCK3_CONF0, + .buck_mode_reg = PV88080AA_REG_BUCK3_CONF1, + .buck_limit_reg = PV88080AA_REG_BUCK3_CONF1, + .buck_vdac_range_reg = PV88080AA_REG_BUCK3_CONF2, + .buck_vrange_gain_reg = PV88080AA_REG_BUCK3_CONF5, + .buck_enable_mask = PV88080_BUCK3_EN, + .buck_vsel_mask = PV88080_VBUCK3_MASK, + .buck_limit_mask = PV88080_BUCK3_ILIM_MASK, + }, + /* HVBUCK */ + .hvbuck_enable_reg = PV88080AA_REG_HVBUCK_CONF2, + .hvbuck_vsel_reg = PV88080AA_REG_HVBUCK_CONF1, + .hvbuck_enable_mask = PV88080_HVBUCK_EN, + .hvbuck_vsel_mask = PV88080_VHVBUCK_MASK, +}; + +static const struct pv88080_compatible_regmap pv88080_ba_regs = { + /* BUCK1 */ + .buck_regmap[0] = { + .buck_enable_reg = PV88080BA_REG_BUCK1_CONF0, + .buck_vsel_reg = PV88080BA_REG_BUCK1_CONF0, + .buck_mode_reg = PV88080BA_REG_BUCK1_CONF1, + .buck_limit_reg = PV88080BA_REG_BUCK1_CONF1, + .buck_vdac_range_reg = PV88080BA_REG_BUCK1_CONF2, + .buck_vrange_gain_reg = PV88080BA_REG_BUCK1_CONF5, + .buck_enable_mask = PV88080_BUCK1_EN, + .buck_vsel_mask = PV88080_VBUCK1_MASK, + .buck_limit_mask = PV88080_BUCK1_ILIM_MASK, + }, + /* BUCK2 */ + .buck_regmap[1] = { + .buck_enable_reg = PV88080BA_REG_BUCK2_CONF0, + .buck_vsel_reg = PV88080BA_REG_BUCK2_CONF0, + .buck_mode_reg = PV88080BA_REG_BUCK2_CONF1, + .buck_limit_reg = PV88080BA_REG_BUCK2_CONF1, + .buck_vdac_range_reg = PV88080BA_REG_BUCK2_CONF2, + .buck_vrange_gain_reg = PV88080BA_REG_BUCK2_CONF5, + .buck_enable_mask = PV88080_BUCK2_EN, + .buck_vsel_mask = PV88080_VBUCK2_MASK, + .buck_limit_mask = PV88080_BUCK2_ILIM_MASK, + }, + /* BUCK3 */ + .buck_regmap[2] = { + .buck_enable_reg = PV88080BA_REG_BUCK3_CONF0, + .buck_vsel_reg = PV88080BA_REG_BUCK3_CONF0, + .buck_mode_reg = PV88080BA_REG_BUCK3_CONF1, + .buck_limit_reg = PV88080BA_REG_BUCK3_CONF1, + .buck_vdac_range_reg = PV88080BA_REG_BUCK3_CONF2, + .buck_vrange_gain_reg = PV88080BA_REG_BUCK3_CONF5, + .buck_enable_mask = PV88080_BUCK3_EN, + .buck_vsel_mask = PV88080_VBUCK3_MASK, + .buck_limit_mask = PV88080_BUCK3_ILIM_MASK, + }, + /* HVBUCK */ + .hvbuck_enable_reg = PV88080BA_REG_HVBUCK_CONF2, + .hvbuck_vsel_reg = PV88080BA_REG_HVBUCK_CONF1, + .hvbuck_enable_mask = PV88080_HVBUCK_EN, + .hvbuck_vsel_mask = PV88080_VHVBUCK_MASK, +}; + +#ifdef CONFIG_OF +static const struct of_device_id pv88080_dt_ids[] = { + { .compatible = "pvs,pv88080", .data = (void *)TYPE_PV88080_AA }, + { .compatible = "pvs,pv88080-aa", .data = (void *)TYPE_PV88080_AA }, + { .compatible = "pvs,pv88080-ba", .data = (void *)TYPE_PV88080_BA }, + {}, +}; +MODULE_DEVICE_TABLE(of, pv88080_dt_ids); +#endif + static unsigned int pv88080_buck_get_mode(struct regulator_dev *rdev) { struct pv88080_regulator *info = rdev_get_drvdata(rdev); unsigned int data; int ret, mode = 0; - ret = regmap_read(rdev->regmap, info->conf, &data); + ret = regmap_read(rdev->regmap, info->mode_reg, &data); if (ret < 0) return ret; @@ -136,7 +268,7 @@ static int pv88080_buck_set_mode(struct regulator_dev *rdev, return -EINVAL; } - return regmap_update_bits(rdev->regmap, info->conf, + return regmap_update_bits(rdev->regmap, info->mode_reg, PV88080_BUCK1_MODE_MASK, val); } @@ -151,7 +283,7 @@ static int pv88080_set_current_limit(struct regulator_dev *rdev, int min, if (min <= info->current_limits[i] && max >= info->current_limits[i]) { return regmap_update_bits(rdev->regmap, - info->conf, + info->limit_reg, info->limit_mask, i << PV88080_BUCK1_ILIM_SHIFT); } @@ -166,7 +298,7 @@ static int pv88080_get_current_limit(struct regulator_dev *rdev) unsigned int data; int ret; - ret = regmap_read(rdev->regmap, info->conf, &data); + ret = regmap_read(rdev->regmap, info->limit_reg, &data); if (ret < 0) return ret; @@ -187,6 +319,15 @@ static struct regulator_ops pv88080_buck_ops = { .get_current_limit = pv88080_get_current_limit, }; +static struct regulator_ops pv88080_hvbuck_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, +}; + #define PV88080_BUCK(chip, regl_name, min, step, max, limits_array) \ {\ .desc = {\ @@ -200,17 +341,25 @@ static struct regulator_ops pv88080_buck_ops = { .min_uV = min, \ .uV_step = step, \ .n_voltages = ((max) - (min))/(step) + 1, \ - .enable_reg = PV88080_REG_##regl_name##_CONF0, \ - .enable_mask = PV88080_##regl_name##_EN, \ - .vsel_reg = PV88080_REG_##regl_name##_CONF0, \ - .vsel_mask = PV88080_V##regl_name##_MASK, \ },\ .current_limits = limits_array, \ .n_current_limits = ARRAY_SIZE(limits_array), \ - .limit_mask = PV88080_##regl_name##_ILIM_MASK, \ - .conf = PV88080_REG_##regl_name##_CONF1, \ - .conf2 = PV88080_REG_##regl_name##_CONF2, \ - .conf5 = PV88080_REG_##regl_name##_CONF5, \ +} + +#define PV88080_HVBUCK(chip, regl_name, min, step, max) \ +{\ + .desc = {\ + .id = chip##_ID_##regl_name,\ + .name = __stringify(chip##_##regl_name),\ + .of_match = of_match_ptr(#regl_name),\ + .regulators_node = of_match_ptr("regulators"),\ + .type = REGULATOR_VOLTAGE,\ + .owner = THIS_MODULE,\ + .ops = &pv88080_hvbuck_ops,\ + .min_uV = min, \ + .uV_step = step, \ + .n_voltages = ((max) - (min))/(step) + 1, \ + },\ } static struct pv88080_regulator pv88080_regulator_info[] = { @@ -220,6 +369,7 @@ static struct pv88080_regulator pv88080_regulator_info[] = { pv88080_buck23_limits), PV88080_BUCK(PV88080, BUCK3, 600000, 6250, 1393750, pv88080_buck23_limits), + PV88080_HVBUCK(PV88080, HVBUCK, 0, 5000, 1275000), }; static irqreturn_t pv88080_irq_handler(int irq, void *data) @@ -280,6 +430,8 @@ static int pv88080_i2c_probe(struct i2c_client *i2c, { struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev); struct pv88080 *chip; + const struct pv88080_compatible_regmap *regmap_config; + const struct of_device_id *match; struct regulator_config config = { }; int i, error, ret; unsigned int conf2, conf5; @@ -297,6 +449,17 @@ static int pv88080_i2c_probe(struct i2c_client *i2c, return error; } + if (i2c->dev.of_node) { + match = of_match_node(pv88080_dt_ids, i2c->dev.of_node); + if (!match) { + dev_err(chip->dev, "Failed to get of_match_node\n"); + return -EINVAL; + } + chip->type = (unsigned long)match->data; + } else { + chip->type = id->driver_data; + } + i2c_set_clientdata(i2c, chip); if (i2c->irq != 0) { @@ -336,31 +499,58 @@ static int pv88080_i2c_probe(struct i2c_client *i2c, "Failed to update mask reg: %d\n", ret); return ret; } - } else { dev_warn(chip->dev, "No IRQ configured\n"); } + switch (chip->type) { + case TYPE_PV88080_AA: + chip->regmap_config = &pv88080_aa_regs; + break; + case TYPE_PV88080_BA: + chip->regmap_config = &pv88080_ba_regs; + break; + } + + regmap_config = chip->regmap_config; config.dev = chip->dev; config.regmap = chip->regmap; - for (i = 0; i < PV88080_MAX_REGULATORS; i++) { + /* Registeration for BUCK1, 2, 3 */ + for (i = 0; i < PV88080_MAX_REGULATORS-1; i++) { if (init_data) config.init_data = &init_data[i]; + pv88080_regulator_info[i].limit_reg + = regmap_config->buck_regmap[i].buck_limit_reg; + pv88080_regulator_info[i].limit_mask + = regmap_config->buck_regmap[i].buck_limit_mask; + pv88080_regulator_info[i].mode_reg + = regmap_config->buck_regmap[i].buck_mode_reg; + pv88080_regulator_info[i].conf2 + = regmap_config->buck_regmap[i].buck_vdac_range_reg; + pv88080_regulator_info[i].conf5 + = regmap_config->buck_regmap[i].buck_vrange_gain_reg; + pv88080_regulator_info[i].desc.enable_reg + = regmap_config->buck_regmap[i].buck_enable_reg; + pv88080_regulator_info[i].desc.enable_mask + = regmap_config->buck_regmap[i].buck_enable_mask; + pv88080_regulator_info[i].desc.vsel_reg + = regmap_config->buck_regmap[i].buck_vsel_reg; + pv88080_regulator_info[i].desc.vsel_mask + = regmap_config->buck_regmap[i].buck_vsel_mask; + ret = regmap_read(chip->regmap, - pv88080_regulator_info[i].conf2, &conf2); + pv88080_regulator_info[i].conf2, &conf2); if (ret < 0) return ret; - conf2 = ((conf2 >> PV88080_BUCK_VDAC_RANGE_SHIFT) & PV88080_BUCK_VDAC_RANGE_MASK); ret = regmap_read(chip->regmap, - pv88080_regulator_info[i].conf5, &conf5); + pv88080_regulator_info[i].conf5, &conf5); if (ret < 0) return ret; - conf5 = ((conf5 >> PV88080_BUCK_VRANGE_GAIN_SHIFT) & PV88080_BUCK_VRANGE_GAIN_MASK); @@ -383,23 +573,38 @@ static int pv88080_i2c_probe(struct i2c_client *i2c, } } + pv88080_regulator_info[PV88080_ID_HVBUCK].desc.enable_reg + = regmap_config->hvbuck_enable_reg; + pv88080_regulator_info[PV88080_ID_HVBUCK].desc.enable_mask + = regmap_config->hvbuck_enable_mask; + pv88080_regulator_info[PV88080_ID_HVBUCK].desc.vsel_reg + = regmap_config->hvbuck_vsel_reg; + pv88080_regulator_info[PV88080_ID_HVBUCK].desc.vsel_mask + = regmap_config->hvbuck_vsel_mask; + + /* Registeration for HVBUCK */ + if (init_data) + config.init_data = &init_data[PV88080_ID_HVBUCK]; + + config.driver_data = (void *)&pv88080_regulator_info[PV88080_ID_HVBUCK]; + chip->rdev[PV88080_ID_HVBUCK] = devm_regulator_register(chip->dev, + &pv88080_regulator_info[PV88080_ID_HVBUCK].desc, &config); + if (IS_ERR(chip->rdev[PV88080_ID_HVBUCK])) { + dev_err(chip->dev, "Failed to register PV88080 regulator\n"); + return PTR_ERR(chip->rdev[PV88080_ID_HVBUCK]); + } + return 0; } static const struct i2c_device_id pv88080_i2c_id[] = { - {"pv88080", 0}, + { "pv88080", TYPE_PV88080_AA }, + { "pv88080-aa", TYPE_PV88080_AA }, + { "pv88080-ba", TYPE_PV88080_BA }, {}, }; MODULE_DEVICE_TABLE(i2c, pv88080_i2c_id); -#ifdef CONFIG_OF -static const struct of_device_id pv88080_dt_ids[] = { - { .compatible = "pvs,pv88080", .data = &pv88080_i2c_id[0] }, - {}, -}; -MODULE_DEVICE_TABLE(of, pv88080_dt_ids); -#endif - static struct i2c_driver pv88080_regulator_driver = { .driver = { .name = "pv88080", diff --git a/drivers/regulator/pv88080-regulator.h b/drivers/regulator/pv88080-regulator.h index 5e9afde606f40..ae25ff360e3db 100644 --- a/drivers/regulator/pv88080-regulator.h +++ b/drivers/regulator/pv88080-regulator.h @@ -17,55 +17,75 @@ #define __PV88080_REGISTERS_H__ /* System Control and Event Registers */ -#define PV88080_REG_EVENT_A 0x04 -#define PV88080_REG_MASK_A 0x09 -#define PV88080_REG_MASK_B 0x0a -#define PV88080_REG_MASK_C 0x0b - -/* Regulator Registers */ -#define PV88080_REG_BUCK1_CONF0 0x27 -#define PV88080_REG_BUCK1_CONF1 0x28 -#define PV88080_REG_BUCK1_CONF2 0x59 -#define PV88080_REG_BUCK1_CONF5 0x5c -#define PV88080_REG_BUCK2_CONF0 0x29 -#define PV88080_REG_BUCK2_CONF1 0x2a -#define PV88080_REG_BUCK2_CONF2 0x61 -#define PV88080_REG_BUCK2_CONF5 0x64 -#define PV88080_REG_BUCK3_CONF0 0x2b -#define PV88080_REG_BUCK3_CONF1 0x2c -#define PV88080_REG_BUCK3_CONF2 0x69 -#define PV88080_REG_BUCK3_CONF5 0x6c +#define PV88080_REG_EVENT_A 0x04 +#define PV88080_REG_MASK_A 0x09 +#define PV88080_REG_MASK_B 0x0A +#define PV88080_REG_MASK_C 0x0B + +/* Regulator Registers - rev. AA */ +#define PV88080AA_REG_HVBUCK_CONF1 0x2D +#define PV88080AA_REG_HVBUCK_CONF2 0x2E +#define PV88080AA_REG_BUCK1_CONF0 0x27 +#define PV88080AA_REG_BUCK1_CONF1 0x28 +#define PV88080AA_REG_BUCK1_CONF2 0x59 +#define PV88080AA_REG_BUCK1_CONF5 0x5C +#define PV88080AA_REG_BUCK2_CONF0 0x29 +#define PV88080AA_REG_BUCK2_CONF1 0x2A +#define PV88080AA_REG_BUCK2_CONF2 0x61 +#define PV88080AA_REG_BUCK2_CONF5 0x64 +#define PV88080AA_REG_BUCK3_CONF0 0x2B +#define PV88080AA_REG_BUCK3_CONF1 0x2C +#define PV88080AA_REG_BUCK3_CONF2 0x69 +#define PV88080AA_REG_BUCK3_CONF5 0x6C + +/* Regulator Registers - rev. BA */ +#define PV88080BA_REG_HVBUCK_CONF1 0x33 +#define PV88080BA_REG_HVBUCK_CONF2 0x34 +#define PV88080BA_REG_BUCK1_CONF0 0x2A +#define PV88080BA_REG_BUCK1_CONF1 0x2C +#define PV88080BA_REG_BUCK1_CONF2 0x5A +#define PV88080BA_REG_BUCK1_CONF5 0x5D +#define PV88080BA_REG_BUCK2_CONF0 0x2D +#define PV88080BA_REG_BUCK2_CONF1 0x2F +#define PV88080BA_REG_BUCK2_CONF2 0x63 +#define PV88080BA_REG_BUCK2_CONF5 0x66 +#define PV88080BA_REG_BUCK3_CONF0 0x30 +#define PV88080BA_REG_BUCK3_CONF1 0x32 +#define PV88080BA_REG_BUCK3_CONF2 0x6C +#define PV88080BA_REG_BUCK3_CONF5 0x6F /* PV88080_REG_EVENT_A (addr=0x04) */ #define PV88080_E_VDD_FLT 0x01 -#define PV88080_E_OVER_TEMP 0x02 +#define PV88080_E_OVER_TEMP 0x02 /* PV88080_REG_MASK_A (addr=0x09) */ #define PV88080_M_VDD_FLT 0x01 -#define PV88080_M_OVER_TEMP 0x02 +#define PV88080_M_OVER_TEMP 0x02 -/* PV88080_REG_BUCK1_CONF0 (addr=0x27) */ +/* PV88080_REG_BUCK1_CONF0 (addr=0x27|0x2A) */ #define PV88080_BUCK1_EN 0x80 -#define PV88080_VBUCK1_MASK 0x7F -/* PV88080_REG_BUCK2_CONF0 (addr=0x29) */ +#define PV88080_VBUCK1_MASK 0x7F + +/* PV88080_REG_BUCK2_CONF0 (addr=0x29|0x2D) */ #define PV88080_BUCK2_EN 0x80 -#define PV88080_VBUCK2_MASK 0x7F -/* PV88080_REG_BUCK3_CONF0 (addr=0x2b) */ +#define PV88080_VBUCK2_MASK 0x7F + +/* PV88080_REG_BUCK3_CONF0 (addr=0x2B|0x30) */ #define PV88080_BUCK3_EN 0x80 -#define PV88080_VBUCK3_MASK 0x7F +#define PV88080_VBUCK3_MASK 0x7F -/* PV88080_REG_BUCK1_CONF1 (addr=0x28) */ -#define PV88080_BUCK1_ILIM_SHIFT 2 +/* PV88080_REG_BUCK1_CONF1 (addr=0x28|0x2C) */ +#define PV88080_BUCK1_ILIM_SHIFT 2 #define PV88080_BUCK1_ILIM_MASK 0x0C #define PV88080_BUCK1_MODE_MASK 0x03 -/* PV88080_REG_BUCK2_CONF1 (addr=0x2a) */ -#define PV88080_BUCK2_ILIM_SHIFT 2 +/* PV88080_REG_BUCK2_CONF1 (addr=0x2A|0x2F) */ +#define PV88080_BUCK2_ILIM_SHIFT 2 #define PV88080_BUCK2_ILIM_MASK 0x0C #define PV88080_BUCK2_MODE_MASK 0x03 -/* PV88080_REG_BUCK3_CONF1 (addr=0x2c) */ -#define PV88080_BUCK3_ILIM_SHIFT 2 +/* PV88080_REG_BUCK3_CONF1 (addr=0x2C|0x32) */ +#define PV88080_BUCK3_ILIM_SHIFT 2 #define PV88080_BUCK3_ILIM_MASK 0x0C #define PV88080_BUCK3_MODE_MASK 0x03 @@ -73,20 +93,26 @@ #define PV88080_BUCK_MODE_AUTO 0x01 #define PV88080_BUCK_MODE_SYNC 0x02 -/* PV88080_REG_BUCK2_CONF2 (addr=0x61) */ -/* PV88080_REG_BUCK3_CONF2 (addr=0x69) */ -#define PV88080_BUCK_VDAC_RANGE_SHIFT 7 -#define PV88080_BUCK_VDAC_RANGE_MASK 0x01 +/* PV88080_REG_HVBUCK_CONF1 (addr=0x2D|0x33) */ +#define PV88080_VHVBUCK_MASK 0xFF + +/* PV88080_REG_HVBUCK_CONF1 (addr=0x2E|0x34) */ +#define PV88080_HVBUCK_EN 0x01 + +/* PV88080_REG_BUCK2_CONF2 (addr=0x61|0x63) */ +/* PV88080_REG_BUCK3_CONF2 (addr=0x69|0x6C) */ +#define PV88080_BUCK_VDAC_RANGE_SHIFT 7 +#define PV88080_BUCK_VDAC_RANGE_MASK 0x01 -#define PV88080_BUCK_VDAC_RANGE_1 0x00 -#define PV88080_BUCK_VDAC_RANGE_2 0x01 +#define PV88080_BUCK_VDAC_RANGE_1 0x00 +#define PV88080_BUCK_VDAC_RANGE_2 0x01 -/* PV88080_REG_BUCK2_CONF5 (addr=0x64) */ -/* PV88080_REG_BUCK3_CONF5 (addr=0x6c) */ -#define PV88080_BUCK_VRANGE_GAIN_SHIFT 0 -#define PV88080_BUCK_VRANGE_GAIN_MASK 0x01 +/* PV88080_REG_BUCK2_CONF5 (addr=0x64|0x66) */ +/* PV88080_REG_BUCK3_CONF5 (addr=0x6C|0x6F) */ +#define PV88080_BUCK_VRANGE_GAIN_SHIFT 0 +#define PV88080_BUCK_VRANGE_GAIN_MASK 0x01 -#define PV88080_BUCK_VRANGE_GAIN_1 0x00 -#define PV88080_BUCK_VRANGE_GAIN_2 0x01 +#define PV88080_BUCK_VRANGE_GAIN_1 0x00 +#define PV88080_BUCK_VRANGE_GAIN_2 0x01 #endif /* __PV88080_REGISTERS_H__ */ From 5258beedc30a72b0c21521aa531ed26ad45cb3f7 Mon Sep 17 00:00:00 2001 From: Baoyou Xie Date: Fri, 23 Sep 2016 20:47:22 +0800 Subject: [PATCH 16/16] regulator: dbx500: remove unused functions in dbx500-prcmu.c We get 2 warnings when building kernel with W=1: drivers/regulator/dbx500-prcmu.c:78:6: warning: no previous prototype for 'ux500_regulator_suspend_debug' [-Wmissing-prototypes] drivers/regulator/dbx500-prcmu.c:87:6: warning: no previous prototype for 'ux500_regulator_resume_debug' [-Wmissing-prototypes] In fact, these functions are unused in dbx500-prcmu.c, but should be removed. So this patch removes the unused functions. Signed-off-by: Baoyou Xie Acked-by: Arnd Bergmann Signed-off-by: Mark Brown --- drivers/regulator/dbx500-prcmu.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/regulator/dbx500-prcmu.c b/drivers/regulator/dbx500-prcmu.c index 3963dfad766c7..8976141c1438a 100644 --- a/drivers/regulator/dbx500-prcmu.c +++ b/drivers/regulator/dbx500-prcmu.c @@ -75,24 +75,6 @@ static struct ux500_regulator_debug { u8 *state_after_suspend; } rdebug; -void ux500_regulator_suspend_debug(void) -{ - int i; - - for (i = 0; i < rdebug.num_regulators; i++) - rdebug.state_before_suspend[i] = - rdebug.regulator_array[i].is_enabled; -} - -void ux500_regulator_resume_debug(void) -{ - int i; - - for (i = 0; i < rdebug.num_regulators; i++) - rdebug.state_after_suspend[i] = - rdebug.regulator_array[i].is_enabled; -} - static int ux500_regulator_power_state_cnt_print(struct seq_file *s, void *p) { /* print power state count */