diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
index 504a4ecfc7b16..b04e66a52de5d 100644
--- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@@ -5,18 +5,20 @@ UniPhier SoCs have SCSSI which supports SPI single channel.
 Required properties:
  - compatible: should be "socionext,uniphier-scssi"
  - reg: address and length of the spi master registers
- - #address-cells: must be <1>, see spi-bus.txt
- - #size-cells: must be <0>, see spi-bus.txt
- - clocks: A phandle to the clock for the device.
- - resets: A phandle to the reset control for the device.
+ - interrupts: a single interrupt specifier
+ - pinctrl-names: should be "default"
+ - pinctrl-0: pin control state for the default mode
+ - clocks: a phandle to the clock for the device
+ - resets: a phandle to the reset control for the device
 
 Example:
 
 spi0: spi@54006000 {
 	compatible = "socionext,uniphier-scssi";
 	reg = <0x54006000 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
+	interrupts = <0 39 4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0>;
 	clocks = <&peri_clk 11>;
 	resets = <&peri_rst 11>;
 };
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 3dc31627c6558..0c2867deb36fc 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -522,11 +522,11 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
 		mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, len);
 		mtk_spi_setup_packet(master);
 
-		cnt = len / 4;
+		cnt = mdata->xfer_len / 4;
 		iowrite32_rep(mdata->base + SPI_TX_DATA_REG,
 				trans->tx_buf + mdata->num_xfered, cnt);
 
-		remainder = len % 4;
+		remainder = mdata->xfer_len % 4;
 		if (remainder > 0) {
 			reg_val = 0;
 			memcpy(&reg_val,
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index f024c3fc3679d..2fd8881fcd65c 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -1540,13 +1540,26 @@ static int omap2_mcspi_remove(struct platform_device *pdev)
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:omap2_mcspi");
 
-#ifdef	CONFIG_SUSPEND
-static int omap2_mcspi_suspend_noirq(struct device *dev)
+static int __maybe_unused omap2_mcspi_suspend(struct device *dev)
 {
-	return pinctrl_pm_select_sleep_state(dev);
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
+	int error;
+
+	error = pinctrl_pm_select_sleep_state(dev);
+	if (error)
+		dev_warn(mcspi->dev, "%s: failed to set pins: %i\n",
+			 __func__, error);
+
+	error = spi_master_suspend(master);
+	if (error)
+		dev_warn(mcspi->dev, "%s: master suspend failed: %i\n",
+			 __func__, error);
+
+	return pm_runtime_force_suspend(dev);
 }
 
-static int omap2_mcspi_resume_noirq(struct device *dev)
+static int __maybe_unused omap2_mcspi_resume(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
@@ -1557,17 +1570,17 @@ static int omap2_mcspi_resume_noirq(struct device *dev)
 		dev_warn(mcspi->dev, "%s: failed to set pins: %i\n",
 			 __func__, error);
 
-	return 0;
-}
+	error = spi_master_resume(master);
+	if (error)
+		dev_warn(mcspi->dev, "%s: master resume failed: %i\n",
+			 __func__, error);
 
-#else
-#define omap2_mcspi_suspend_noirq	NULL
-#define omap2_mcspi_resume_noirq	NULL
-#endif
+	return pm_runtime_force_resume(dev);
+}
 
 static const struct dev_pm_ops omap2_mcspi_pm_ops = {
-	.suspend_noirq = omap2_mcspi_suspend_noirq,
-	.resume_noirq = omap2_mcspi_resume_noirq,
+	SET_SYSTEM_SLEEP_PM_OPS(omap2_mcspi_suspend,
+				omap2_mcspi_resume)
 	.runtime_resume	= omap_mcspi_runtime_resume,
 };