From 61a9c6e39c8dfe2fd56dee44f817cf2a1b3f3c71 Mon Sep 17 00:00:00 2001 From: Neeraj Sanjay Kale Date: Thu, 3 Apr 2025 20:32:23 +0530 Subject: [PATCH] Bluetooth: btnxpuart: Revert baudrate change in nxp_shutdown This reverts the change baudrate logic in nxp_shutdown. Earlier, when the driver was removed, it restored the controller baudrate to fw_init_baudrate, so that on re-loading the driver, things work fine. However, if the driver was removed while hci0 interface is down, the change baudrate vendor command could not be sent by the driver. When the driver was re-loaded, host and controller baudrate would be mismatched and hci initialization would fail. The only way to recover would be to reboot the system. This issue was fixed by moving the restore baudrate logic from nxp_serdev_remove() to nxp_shutdown(). This fix however caused another issue with the command "hciconfig hci0 reset", which makes hci0 DOWN and UP immediately. Running "bluetoothctl power off" and "bluetoothctl power on" in a tight loop works fine. To maintain support for "hciconfig reset" command, the above mentioned fix is reverted. Fixes: 6fca6781d19d ("Bluetooth: btnxpuart: Move vendor specific initialization to .post_init") Signed-off-by: Neeraj Sanjay Kale Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btnxpuart.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c index 5091dea762a0..2d58b8be2c5f 100644 --- a/drivers/bluetooth/btnxpuart.c +++ b/drivers/bluetooth/btnxpuart.c @@ -1445,9 +1445,6 @@ static int nxp_shutdown(struct hci_dev *hdev) /* HCI_NXP_IND_RESET command may not returns any response */ if (!IS_ERR(skb)) kfree_skb(skb); - } else if (nxpdev->current_baudrate != nxpdev->fw_init_baudrate) { - nxpdev->new_baudrate = nxpdev->fw_init_baudrate; - nxp_set_baudrate_cmd(hdev, NULL); } return 0; @@ -1799,13 +1796,15 @@ static void nxp_serdev_remove(struct serdev_device *serdev) clear_bit(BTNXPUART_FW_DOWNLOADING, &nxpdev->tx_state); wake_up_interruptible(&nxpdev->check_boot_sign_wait_q); wake_up_interruptible(&nxpdev->fw_dnld_done_wait_q); - } - - if (test_bit(HCI_RUNNING, &hdev->flags)) { - /* Ensure shutdown callback is executed before unregistering, so - * that baudrate is reset to initial value. + } else { + /* Restore FW baudrate to fw_init_baudrate if changed. + * This will ensure FW baudrate is in sync with + * driver baudrate in case this driver is re-inserted. */ - nxp_shutdown(hdev); + if (nxpdev->current_baudrate != nxpdev->fw_init_baudrate) { + nxpdev->new_baudrate = nxpdev->fw_init_baudrate; + nxp_set_baudrate_cmd(hdev, NULL); + } } ps_cleanup(nxpdev);