From d1a35ee277afafc4f35d1de436b02941b46a7ca2 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Tue, 13 May 2014 08:24:00 +0000 Subject: [PATCH 01/15] ixgbe: fix linking at 100Mbps on copper devices with MNG FW enabled Driver was calling setup_link to make sure that fiber interfaces with MNG FW enabled will get link on probe because the laser was most likely turned off. This prevented non-fiber devices with MNG FW from linking at 100Mbps. This patch adds a check to only call setup_link for fiber devices. Reported-and-by: Tony Luck Signed-off-by: Emil Tantilov Tested-by: Tony Luck Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 3d666020ea152..cf9956a9315a7 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -8449,8 +8449,8 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) ixgbe_dbg_adapter_init(adapter); - /* Need link setup for MNG FW, else wait for IXGBE_UP */ - if (ixgbe_mng_enabled(hw) && hw->mac.ops.setup_link) + /* setup link for SFP devices with MNG FW, else wait for IXGBE_UP */ + if (ixgbe_mng_enabled(hw) && ixgbe_is_sfp(hw) && hw->mac.ops.setup_link) hw->mac.ops.setup_link(hw, IXGBE_LINK_SPEED_10GB_FULL | IXGBE_LINK_SPEED_1GB_FULL, true); From 04c8de8e921a024984e1fdf2e373dbcc7ff27a0c Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Fri, 16 May 2014 05:12:24 +0000 Subject: [PATCH 02/15] ixgbe: rename ixgbe_ptp_enable to ixgbe_ptp_feature_enable Since the name ixgbe_ptp_enable could be misconstrued as a function which enables the whole PTP core, rename this function so that it is clear the function is for enabling of the extra features such as PPS signal. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 8902ae6834577..1a88609d2b584 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -334,7 +334,7 @@ static int ixgbe_ptp_settime(struct ptp_clock_info *ptp, } /** - * ixgbe_ptp_enable + * ixgbe_ptp_feature_enable * @ptp: the ptp clock structure * @rq: the requested feature to change * @on: whether to enable or disable the feature @@ -342,8 +342,8 @@ static int ixgbe_ptp_settime(struct ptp_clock_info *ptp, * enable (or disable) ancillary features of the phc subsystem. * our driver only supports the PPS feature on the X540 */ -static int ixgbe_ptp_enable(struct ptp_clock_info *ptp, - struct ptp_clock_request *rq, int on) +static int ixgbe_ptp_feature_enable(struct ptp_clock_info *ptp, + struct ptp_clock_request *rq, int on) { struct ixgbe_adapter *adapter = container_of(ptp, struct ixgbe_adapter, ptp_caps); @@ -851,7 +851,7 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime; adapter->ptp_caps.gettime = ixgbe_ptp_gettime; adapter->ptp_caps.settime = ixgbe_ptp_settime; - adapter->ptp_caps.enable = ixgbe_ptp_enable; + adapter->ptp_caps.enable = ixgbe_ptp_feature_enable; break; case ixgbe_mac_82599EB: snprintf(adapter->ptp_caps.name, @@ -867,7 +867,7 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime; adapter->ptp_caps.gettime = ixgbe_ptp_gettime; adapter->ptp_caps.settime = ixgbe_ptp_settime; - adapter->ptp_caps.enable = ixgbe_ptp_enable; + adapter->ptp_caps.enable = ixgbe_ptp_feature_enable; break; default: adapter->ptp_clock = NULL; From a7ef4286364f355b528dd777868c71bc6055955b Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Fri, 16 May 2014 05:12:25 +0000 Subject: [PATCH 03/15] ixgbe: extract the hardware setup from the ixgbe_ptp_set_ts_config Currently all of the hardware setup logic for the PTP hardware bits is buried inside of the ioctl which sets the timestamp configuration. This makes it hard to use this logic in other places (primarily reset), and this means we can't restore current timestamp mode upon a MAC reset. Extracting this logic into a separate function will enable future work for the ixgbe_ptp_reset function. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 50 ++++++++++++++------ 1 file changed, 36 insertions(+), 14 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 1a88609d2b584..5a75dd5c61981 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -570,9 +570,9 @@ int ixgbe_ptp_get_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr) } /** - * ixgbe_ptp_set_ts_config - control hardware time stamping - * @adapter: pointer to adapter struct - * @ifreq: ioctl data + * ixgbe_ptp_set_timestamp_mode - setup the hardware for the requested mode + * @adapter: the private ixgbe adapter structure + * @config: the hwtstamp configuration requested * * Outgoing time stamping can be enabled and disabled. Play nice and * disable it when requested, although it shouldn't cause any overhead @@ -590,25 +590,25 @@ int ixgbe_ptp_get_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr) * packets, regardless of the type specified in the register, only use V2 * Event mode. This more accurately tells the user what the hardware is going * to do anyways. + * + * Note: this may modify the hwtstamp configuration towards a more general + * mode, if required to support the specifically requested mode. */ -int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr) +static int ixgbe_ptp_set_timestamp_mode(struct ixgbe_adapter *adapter, + struct hwtstamp_config *config) { struct ixgbe_hw *hw = &adapter->hw; - struct hwtstamp_config config; u32 tsync_tx_ctl = IXGBE_TSYNCTXCTL_ENABLED; u32 tsync_rx_ctl = IXGBE_TSYNCRXCTL_ENABLED; u32 tsync_rx_mtrl = PTP_EV_PORT << 16; bool is_l2 = false; u32 regval; - if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) - return -EFAULT; - /* reserved for future extensions */ - if (config.flags) + if (config->flags) return -EINVAL; - switch (config.tx_type) { + switch (config->tx_type) { case HWTSTAMP_TX_OFF: tsync_tx_ctl = 0; case HWTSTAMP_TX_ON: @@ -617,7 +617,7 @@ int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr) return -ERANGE; } - switch (config.rx_filter) { + switch (config->rx_filter) { case HWTSTAMP_FILTER_NONE: tsync_rx_ctl = 0; tsync_rx_mtrl = 0; @@ -641,7 +641,7 @@ int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr) case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_EVENT_V2; is_l2 = true; - config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; + config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; break; case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: case HWTSTAMP_FILTER_ALL: @@ -652,7 +652,7 @@ int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr) * Delay_Req messages and hardware does not support * timestamping all packets => return error */ - config.rx_filter = HWTSTAMP_FILTER_NONE; + config->rx_filter = HWTSTAMP_FILTER_NONE; return -ERANGE; } @@ -671,7 +671,6 @@ int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr) else IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_1588), 0); - /* enable/disable TX */ regval = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL); regval &= ~IXGBE_TSYNCTXCTL_ENABLED; @@ -693,6 +692,29 @@ int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr) regval = IXGBE_READ_REG(hw, IXGBE_TXSTMPH); regval = IXGBE_READ_REG(hw, IXGBE_RXSTMPH); + return 0; +} + +/** + * ixgbe_ptp_set_ts_config - user entry point for timestamp mode + * @adapter: pointer to adapter struct + * @ifreq: ioctl data + * + * Set hardware to requested mode. If unsupported, return an error with no + * changes. Otherwise, store the mode for future reference. + */ +int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr) +{ + struct hwtstamp_config config; + int err; + + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + err = ixgbe_ptp_set_timestamp_mode(adapter, &config); + if (err) + return err; + /* save these settings for future reference */ memcpy(&adapter->tstamp_config, &config, sizeof(adapter->tstamp_config)); From d63214079fe844892e49786992b79eae00982ae2 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Fri, 16 May 2014 05:12:26 +0000 Subject: [PATCH 04/15] ixgbe: allow ixgbe_ptp_reset to maintain current hwtstamp config Rather than clearing the hwtstamp configuration, we should use the known configuration requested by the user and call the function which has now been separated from the ioctl. This means that after a reset, the timestamp mode will be maintained rather than lost. We still can't maintain the clock value, however. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 5a75dd5c61981..9d329f5250e0c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -812,9 +812,13 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) * ixgbe_ptp_reset * @adapter: the ixgbe private board structure * - * When the MAC resets, all timesync features are reset. This function should be - * called to re-enable the PTP clock structure. It will re-init the timecounter - * structure based on the kernel time as well as setup the cycle counter data. + * When the MAC resets, all the hardware bits for timesync are reset. This + * function is used to re-enable the device for PTP based on current settings. + * We do lose the current clock time, so just reset the cyclecounter to the + * system real clock time. + * + * This function will maintain hwtstamp_config settings, and resets the SDP + * output if it was enabled. */ void ixgbe_ptp_reset(struct ixgbe_adapter *adapter) { @@ -826,8 +830,8 @@ void ixgbe_ptp_reset(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0x00000000); IXGBE_WRITE_FLUSH(hw); - /* Reset the saved tstamp_config */ - memset(&adapter->tstamp_config, 0, sizeof(adapter->tstamp_config)); + /* reset the hardware timestamping mode */ + ixgbe_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config); ixgbe_ptp_start_cyclecounter(adapter); @@ -907,6 +911,8 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) } else e_dev_info("registered PHC device on %s\n", netdev->name); + adapter->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE; + adapter->tstamp_config.tx_type = HWTSTAMP_TX_OFF; ixgbe_ptp_reset(adapter); /* enter the IXGBE_PTP_RUNNING state */ From 63328ada9ec778315ea6dd91d82014288a7e3d43 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Fri, 16 May 2014 05:12:27 +0000 Subject: [PATCH 05/15] ixgbe: extract PTP clock device from ptp_init In order to properly handle a suspend/resume cycle, we cannot destroy the PTP clock device. As part of this, we should only re-create the device on first initialization. After a resume, when ixgbe_ptp_init is called, we won't create a new clock, and we will use the old clock device. To that end, this patch extracts the clock creation out of ptp_init, and only calls it if we don't already have a ptp_clock pointer. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 56 ++++++++++++++++---- 1 file changed, 47 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 9d329f5250e0c..9df7e57b9f933 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -851,16 +851,23 @@ void ixgbe_ptp_reset(struct ixgbe_adapter *adapter) } /** - * ixgbe_ptp_init + * ixgbe_ptp_create_clock * @adapter: the ixgbe private adapter structure * - * This function performs the required steps for enabling ptp - * support. If ptp support has already been loaded it simply calls the - * cyclecounter init routine and exits. + * This function performs setup of the user entry point function table and + * initializes the PTP clock device, which is used to access the clock-like + * features of the PTP core. It will be called by ixgbe_ptp_init, only if + * there isn't already a clock device (such as after a suspend/resume cycle, + * where the clock device wasn't destroyed). */ -void ixgbe_ptp_init(struct ixgbe_adapter *adapter) +static int ixgbe_ptp_create_clock(struct ixgbe_adapter *adapter) { struct net_device *netdev = adapter->netdev; + long err; + + /* do nothing if we already have a clock device */ + if (!IS_ERR_OR_NULL(adapter->ptp_clock)) + return 0; switch (adapter->hw.mac.type) { case ixgbe_mac_X540: @@ -897,22 +904,53 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) break; default: adapter->ptp_clock = NULL; - return; + return -EOPNOTSUPP; } - spin_lock_init(&adapter->tmreg_lock); - INIT_WORK(&adapter->ptp_tx_work, ixgbe_ptp_tx_hwtstamp_work); - adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps, &adapter->pdev->dev); if (IS_ERR(adapter->ptp_clock)) { + err = PTR_ERR(adapter->ptp_clock); adapter->ptp_clock = NULL; e_dev_err("ptp_clock_register failed\n"); + return err; } else e_dev_info("registered PHC device on %s\n", netdev->name); + /* set default timestamp mode to disabled here. We do this in + * create_clock instead of init, because we don't want to override the + * previous settings during a resume cycle. + */ adapter->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE; adapter->tstamp_config.tx_type = HWTSTAMP_TX_OFF; + + return 0; +} + +/** + * ixgbe_ptp_init + * @adapter: the ixgbe private adapter structure + * + * This function performs the required steps for enabling PTP + * support. If PTP support has already been loaded it simply calls the + * cyclecounter init routine and exits. + */ +void ixgbe_ptp_init(struct ixgbe_adapter *adapter) +{ + /* initialize the spin lock first since we can't control when a user + * will call the entry functions once we have initialized the clock + * device + */ + spin_lock_init(&adapter->tmreg_lock); + + /* obtain a PTP device, or re-use an existing device */ + if (ixgbe_ptp_create_clock(adapter)) + return; + + /* we have a clock so we can initialize work now */ + INIT_WORK(&adapter->ptp_tx_work, ixgbe_ptp_tx_hwtstamp_work); + + /* reset the PTP related hardware bits */ ixgbe_ptp_reset(adapter); /* enter the IXGBE_PTP_RUNNING state */ From 9966d1ee6d270a40b3f7b633c23a18e52968b77a Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Fri, 16 May 2014 05:12:28 +0000 Subject: [PATCH 06/15] ixgbe: separate the PTP suspend and stop actions Since we are adding proper support for suspend of PTP, extract out of ixgbe_ptp_stop those things relevant to suspend. Then, have ixgbe_ptp_stop call ixgbe_ptp_suspend. The next patch in the series will have ixgbe_ptp_suspend called from the ixgbe_suspend path. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe.h | 1 + drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 31 +++++++++++++++----- 2 files changed, 25 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 4c0203b01941d..ac9f2148cdc5c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -957,6 +957,7 @@ static inline struct netdev_queue *txring_txq(const struct ixgbe_ring *ring) } void ixgbe_ptp_init(struct ixgbe_adapter *adapter); +void ixgbe_ptp_suspend(struct ixgbe_adapter *adapter); void ixgbe_ptp_stop(struct ixgbe_adapter *adapter); void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter); void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 9df7e57b9f933..b3266b7536d50 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -960,28 +960,45 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) } /** - * ixgbe_ptp_stop - disable ptp device and stop the overflow check - * @adapter: pointer to adapter struct + * ixgbe_ptp_suspend - stop PTP work items + * @ adapter: pointer to adapter struct * - * this function stops the ptp support, and cancels the delayed work. + * this function suspends PTP activity, and prevents more PTP work from being + * generated, but does not destroy the PTP clock device. */ -void ixgbe_ptp_stop(struct ixgbe_adapter *adapter) +void ixgbe_ptp_suspend(struct ixgbe_adapter *adapter) { /* Leave the IXGBE_PTP_RUNNING state. */ if (!test_and_clear_bit(__IXGBE_PTP_RUNNING, &adapter->state)) return; - /* stop the PPS signal */ - adapter->flags2 &= ~IXGBE_FLAG2_PTP_PPS_ENABLED; - ixgbe_ptp_setup_sdp(adapter); + /* since this might be called in suspend, we don't clear the state, + * but simply reset the auxiliary PPS signal control register + */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_TSAUXC, 0x0); + /* ensure that we cancel any pending PTP Tx work item in progress */ cancel_work_sync(&adapter->ptp_tx_work); if (adapter->ptp_tx_skb) { dev_kfree_skb_any(adapter->ptp_tx_skb); adapter->ptp_tx_skb = NULL; clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state); } +} + +/** + * ixgbe_ptp_stop - close the PTP device + * @adapter: pointer to adapter struct + * + * completely destroy the PTP device, should only be called when the device is + * being fully closed. + */ +void ixgbe_ptp_stop(struct ixgbe_adapter *adapter) +{ + /* first, suspend PTP activity */ + ixgbe_ptp_suspend(adapter); + /* disable the PTP clock device */ if (adapter->ptp_clock) { ptp_clock_unregister(adapter->ptp_clock); adapter->ptp_clock = NULL; From a0cccce2cec76568190090f7bb028916d8b3210e Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Fri, 16 May 2014 05:12:29 +0000 Subject: [PATCH 07/15] ixgbe: avoid duplicate code in suspend and stop paths Resume path calls .open but suspend path cannot call .stop because fdirs should not be freed and control over hardware should not be released until WoL is configured. To avoid having to duplicate all changes made in .stop on suspend path split out part of .stop that is relevant during suspend and call it from .stop and during suspend. This fix also ensures that ixgbe_ptp_suspend is called during the suspend path, and helps avoid similar errors. We can't call ixgbe_ptp_stop, since it will free the PTP clock device, which we shouldn't be doing during a suspend path. Signed-off-by: Jakub Kicinski Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 25 +++++++++++-------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index cf9956a9315a7..ea11e2c8ee8cc 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -5659,6 +5659,17 @@ static int ixgbe_open(struct net_device *netdev) return err; } +static void ixgbe_close_suspend(struct ixgbe_adapter *adapter) +{ + ixgbe_ptp_suspend(adapter); + + ixgbe_down(adapter); + ixgbe_free_irq(adapter); + + ixgbe_free_all_tx_resources(adapter); + ixgbe_free_all_rx_resources(adapter); +} + /** * ixgbe_close - Disables a network interface * @netdev: network interface device structure @@ -5676,14 +5687,10 @@ static int ixgbe_close(struct net_device *netdev) ixgbe_ptp_stop(adapter); - ixgbe_down(adapter); - ixgbe_free_irq(adapter); + ixgbe_close_suspend(adapter); ixgbe_fdir_filter_exit(adapter); - ixgbe_free_all_tx_resources(adapter); - ixgbe_free_all_rx_resources(adapter); - ixgbe_release_hw_control(adapter); return 0; @@ -5750,12 +5757,8 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) netif_device_detach(netdev); rtnl_lock(); - if (netif_running(netdev)) { - ixgbe_down(adapter); - ixgbe_free_irq(adapter); - ixgbe_free_all_tx_resources(adapter); - ixgbe_free_all_rx_resources(adapter); - } + if (netif_running(netdev)) + ixgbe_close_suspend(adapter); rtnl_unlock(); ixgbe_clear_interrupt_scheme(adapter); From b3e5bf1ff32cbc58c56675498565020460c683cd Mon Sep 17 00:00:00 2001 From: David Ertman Date: Tue, 6 May 2014 03:50:17 +0000 Subject: [PATCH 08/15] e1000e: Failure to write SHRA turns on PROMISC mode Previously, the check to turn on promiscuous mode only took into account the total number of SHared Receive Address (SHRA) registers and if the request was for a register within that range. It is possible that the Management Engine might have locked a number of SHRA and not allowed a new address to be written to the requested register. Add a function to determine the number of unlocked SHRA registers. Then determine if the number of registers available is sufficient for our needs, if not then return -ENOMEM so that UNICAST PROMISC mode is activated. Since the method by which ME claims SHRA registers is non-deterministic, also add a return value to the function attempting to write an address to a SHRA, and return a -E1000_ERR_CONFIG if the write fails. The error will be passed up the function chain and allow the driver to also set UNICAST PROMISC when this happens. Cc: Vlad Yasevich Signed-off-by: Dave Ertman Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- .../net/ethernet/intel/e1000e/80003es2lan.c | 1 + drivers/net/ethernet/intel/e1000e/82571.c | 1 + drivers/net/ethernet/intel/e1000e/hw.h | 3 +- drivers/net/ethernet/intel/e1000e/ich8lan.c | 57 ++++++++++++++++--- drivers/net/ethernet/intel/e1000e/mac.c | 9 ++- drivers/net/ethernet/intel/e1000e/mac.h | 3 +- drivers/net/ethernet/intel/e1000e/netdev.c | 10 +++- 7 files changed, 71 insertions(+), 13 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index a5f6b11d6992e..08f22f348800d 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -1365,6 +1365,7 @@ static const struct e1000_mac_operations es2_mac_ops = { .setup_led = e1000e_setup_led_generic, .config_collision_dist = e1000e_config_collision_dist_generic, .rar_set = e1000e_rar_set_generic, + .rar_get_count = e1000e_rar_get_count_generic, }; static const struct e1000_phy_operations es2_phy_ops = { diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index e0aa7f1efb08c..218481e509f99 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -1896,6 +1896,7 @@ static const struct e1000_mac_operations e82571_mac_ops = { .config_collision_dist = e1000e_config_collision_dist_generic, .read_mac_addr = e1000_read_mac_addr_82571, .rar_set = e1000e_rar_set_generic, + .rar_get_count = e1000e_rar_get_count_generic, }; static const struct e1000_phy_operations e82_phy_ops_igp = { diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 6b3de5f39a978..72f5475c4b909 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -469,8 +469,9 @@ struct e1000_mac_operations { s32 (*setup_led)(struct e1000_hw *); void (*write_vfta)(struct e1000_hw *, u32, u32); void (*config_collision_dist)(struct e1000_hw *); - void (*rar_set)(struct e1000_hw *, u8 *, u32); + int (*rar_set)(struct e1000_hw *, u8 *, u32); s32 (*read_mac_addr)(struct e1000_hw *); + u32 (*rar_get_count)(struct e1000_hw *); }; /* When to use various PHY register access functions: diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 5f55395616612..b75862dd72821 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -139,8 +139,9 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); -static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index); -static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index); +static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index); +static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index); +static u32 e1000_rar_get_count_pch_lpt(struct e1000_hw *hw); static s32 e1000_k1_workaround_lv(struct e1000_hw *hw); static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate); static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force); @@ -704,6 +705,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) mac->ops.rar_set = e1000_rar_set_pch_lpt; mac->ops.setup_physical_interface = e1000_setup_copper_link_pch_lpt; + mac->ops.rar_get_count = e1000_rar_get_count_pch_lpt; } /* Enable PCS Lock-loss workaround for ICH8 */ @@ -1668,7 +1670,7 @@ static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw) * contain the MAC address but RAR[1-6] are reserved for manageability (ME). * Use SHRA[0-3] in place of those reserved for ME. **/ -static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) +static int e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; @@ -1690,7 +1692,7 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) e1e_flush(); ew32(RAH(index), rar_high); e1e_flush(); - return; + return 0; } /* RAR[1-6] are owned by manageability. Skip those and program the @@ -1713,7 +1715,7 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) /* verify the register updates */ if ((er32(SHRAL(index - 1)) == rar_low) && (er32(SHRAH(index - 1)) == rar_high)) - return; + return 0; e_dbg("SHRA[%d] might be locked by ME - FWSM=0x%8.8x\n", (index - 1), er32(FWSM)); @@ -1721,6 +1723,43 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) out: e_dbg("Failed to write receive address at index %d\n", index); + return -E1000_ERR_CONFIG; +} + +/** + * e1000_rar_get_count_pch_lpt - Get the number of available SHRA + * @hw: pointer to the HW structure + * + * Get the number of available receive registers that the Host can + * program. SHRA[0-10] are the shared receive address registers + * that are shared between the Host and manageability engine (ME). + * ME can reserve any number of addresses and the host needs to be + * able to tell how many available registers it has access to. + **/ +static u32 e1000_rar_get_count_pch_lpt(struct e1000_hw *hw) +{ + u32 wlock_mac; + u32 num_entries; + + wlock_mac = er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK; + wlock_mac >>= E1000_FWSM_WLOCK_MAC_SHIFT; + + switch (wlock_mac) { + case 0: + /* All SHRA[0..10] and RAR[0] available */ + num_entries = hw->mac.rar_entry_count; + break; + case 1: + /* Only RAR[0] available */ + num_entries = 1; + break; + default: + /* SHRA[0..(wlock_mac - 1)] available + RAR[0] */ + num_entries = wlock_mac + 1; + break; + } + + return num_entries; } /** @@ -1734,7 +1773,7 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) * contain the MAC address. SHRA[0-10] are the shared receive address * registers that are shared between the Host and manageability engine (ME). **/ -static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) +static int e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; u32 wlock_mac; @@ -1756,7 +1795,7 @@ static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) e1e_flush(); ew32(RAH(index), rar_high); e1e_flush(); - return; + return 0; } /* The manageability engine (ME) can lock certain SHRAR registers that @@ -1788,12 +1827,13 @@ static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) /* verify the register updates */ if ((er32(SHRAL_PCH_LPT(index - 1)) == rar_low) && (er32(SHRAH_PCH_LPT(index - 1)) == rar_high)) - return; + return 0; } } out: e_dbg("Failed to write receive address at index %d\n", index); + return -E1000_ERR_CONFIG; } /** @@ -4977,6 +5017,7 @@ static const struct e1000_mac_operations ich8_mac_ops = { /* id_led_init dependent on mac type */ .config_collision_dist = e1000e_config_collision_dist_generic, .rar_set = e1000e_rar_set_generic, + .rar_get_count = e1000e_rar_get_count_generic, }; static const struct e1000_phy_operations ich8_phy_ops = { diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index baa0a466d1d05..8c386f3a15ebb 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -211,6 +211,11 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) return 0; } +u32 e1000e_rar_get_count_generic(struct e1000_hw *hw) +{ + return hw->mac.rar_entry_count; +} + /** * e1000e_rar_set_generic - Set receive address register * @hw: pointer to the HW structure @@ -220,7 +225,7 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) * Sets the receive address array register at index to the address passed * in by addr. **/ -void e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index) +int e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; @@ -244,6 +249,8 @@ void e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index) e1e_flush(); ew32(RAH(index), rar_high); e1e_flush(); + + return 0; } /** diff --git a/drivers/net/ethernet/intel/e1000e/mac.h b/drivers/net/ethernet/intel/e1000e/mac.h index 4e81c2825b7a1..0513d90cdeeaa 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.h +++ b/drivers/net/ethernet/intel/e1000e/mac.h @@ -61,7 +61,8 @@ void e1000e_update_adaptive(struct e1000_hw *hw); void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value); void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw); -void e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index); +u32 e1000e_rar_get_count_generic(struct e1000_hw *hw); +int e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index); void e1000e_config_collision_dist_generic(struct e1000_hw *hw); #endif diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index e4207efd13f86..6084e6ba45c24 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3311,9 +3311,11 @@ static int e1000e_write_uc_addr_list(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - unsigned int rar_entries = hw->mac.rar_entry_count; + unsigned int rar_entries; int count = 0; + rar_entries = hw->mac.ops.rar_get_count(hw); + /* save a rar entry for our hardware address */ rar_entries--; @@ -3332,9 +3334,13 @@ static int e1000e_write_uc_addr_list(struct net_device *netdev) * combining */ netdev_for_each_uc_addr(ha, netdev) { + int rval; + if (!rar_entries) break; - hw->mac.ops.rar_set(hw, ha->addr, rar_entries--); + rval = hw->mac.ops.rar_set(hw, ha->addr, rar_entries--); + if (rval < 0) + return -ENOMEM; count++; } } From 5e7ff970041321a26f2dc3aa41ba79e787fcf8f9 Mon Sep 17 00:00:00 2001 From: Todd Fujinaka Date: Sat, 3 May 2014 06:41:37 +0000 Subject: [PATCH 09/15] e1000e: 82574/82583 TimeSync errata for SYSTIM read Due to a synchronization error, the value read from SYSTIML/SYSTIMH might be incorrect. Signed-off-by: Todd Fujinaka Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/e1000.h | 2 ++ drivers/net/ethernet/intel/e1000e/netdev.c | 27 +++++++++++++++++++++- 2 files changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index e27e60910949c..63bde99a4ab4a 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -391,6 +391,8 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca); * 25MHz 46-bit 2^46 / 10^9 / 3600 = 19.55 hours */ #define E1000_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 60 * 4) +#define E1000_MAX_82574_SYSTIM_REREADS 50 +#define E1000_82574_SYSTIM_EPSILON (1ULL << 35ULL) /* hardware capability, feature, and workaround flags */ #define FLAG_HAS_AMT (1 << 0) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 6084e6ba45c24..95cf482cf0af8 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -4099,12 +4099,37 @@ static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc) struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter, cc); struct e1000_hw *hw = &adapter->hw; - cycle_t systim; + cycle_t systim, systim_next; /* latch SYSTIMH on read of SYSTIML */ systim = (cycle_t)er32(SYSTIML); systim |= (cycle_t)er32(SYSTIMH) << 32; + if ((hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82583)) { + u64 incvalue, time_delta, rem, temp; + int i; + + /* errata for 82574/82583 possible bad bits read from SYSTIMH/L + * check to see that the time is incrementing at a reasonable + * rate and is a multiple of incvalue + */ + incvalue = er32(TIMINCA) & E1000_TIMINCA_INCVALUE_MASK; + for (i = 0; i < E1000_MAX_82574_SYSTIM_REREADS; i++) { + /* latch SYSTIMH on read of SYSTIML */ + systim_next = (cycle_t)er32(SYSTIML); + systim_next |= (cycle_t)er32(SYSTIMH) << 32; + + time_delta = systim_next - systim; + temp = time_delta; + rem = do_div(temp, incvalue); + + systim = systim_next; + + if ((time_delta < E1000_82574_SYSTIM_EPSILON) && + (rem == 0)) + break; + } + } return systim; } From 261a7d121e3059a00f75688f398b38c6c2c25c48 Mon Sep 17 00:00:00 2001 From: David Ertman Date: Tue, 13 May 2014 00:02:12 +0000 Subject: [PATCH 10/15] e1000e: Cleanup parenthesis around return value Signed-off-by: Dave Ertman Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index b75862dd72821..8894ab8ed6bd8 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1637,9 +1637,9 @@ static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw) u32 fwsm; fwsm = er32(FWSM); - return ((fwsm & E1000_ICH_FWSM_FW_VALID) && + return (fwsm & E1000_ICH_FWSM_FW_VALID) && ((fwsm & E1000_FWSM_MODE_MASK) == - (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))); + (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)); } /** From 50844bb7f445165afda1af315bd16c93bf528185 Mon Sep 17 00:00:00 2001 From: David Ertman Date: Tue, 13 May 2014 00:06:26 +0000 Subject: [PATCH 11/15] e1000e: Fix expand setting EEE link info to all affected parts Previously, the update_phy_task was only calling e1000_set_eee_pchlan() for phy.type 82579. This patch is to cause this function to be called for 82579 and newer phy.types. This causes the dev_spec->eee_lp_ability to have the correct value when going into SX states. Signed-off-by: Dave Ertman Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 95cf482cf0af8..e00144a4ed55f 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -4530,7 +4530,7 @@ static void e1000e_update_phy_task(struct work_struct *work) e1000_get_phy_info(hw); /* Enable EEE on 82579 after link up */ - if (hw->phy.type == e1000_phy_82579) + if (hw->phy.type >= e1000_phy_82579) e1000_set_eee_pchlan(hw); } From c6f3148c5bcad2eb9ff1c700d6c79815173aed35 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 20 May 2014 08:22:45 +0000 Subject: [PATCH 12/15] e1000e: Out of line __ew32_prepare/__ew32 Out of lining these two common inlines saves about 30k text size, due to their errata workarounds. 14131431 2008136 1507328 17646895 10d452f vmlinux-before-e1000e 14101415 2004040 1507328 17612783 10cbfef vmlinux-e1000e Signed-off-by: Andi Kleen Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/e1000.h | 31 ++-------------------- drivers/net/ethernet/intel/e1000e/netdev.c | 30 +++++++++++++++++++++ 2 files changed, 32 insertions(+), 29 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 63bde99a4ab4a..7785240a0da1a 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -575,35 +575,8 @@ static inline u32 __er32(struct e1000_hw *hw, unsigned long reg) #define er32(reg) __er32(hw, E1000_##reg) -/** - * __ew32_prepare - prepare to write to MAC CSR register on certain parts - * @hw: pointer to the HW structure - * - * When updating the MAC CSR registers, the Manageability Engine (ME) could - * be accessing the registers at the same time. Normally, this is handled in - * h/w by an arbiter but on some parts there is a bug that acknowledges Host - * accesses later than it should which could result in the register to have - * an incorrect value. Workaround this by checking the FWSM register which - * has bit 24 set while ME is accessing MAC CSR registers, wait if it is set - * and try again a number of times. - **/ -static inline s32 __ew32_prepare(struct e1000_hw *hw) -{ - s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT; - - while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i) - udelay(50); - - return i; -} - -static inline void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val) -{ - if (hw->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) - __ew32_prepare(hw); - - writel(val, hw->hw_addr + reg); -} +s32 __ew32_prepare(struct e1000_hw *hw); +void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val); #define ew32(reg, val) __ew32(hw, E1000_##reg, (val)) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index e00144a4ed55f..201cc93f36256 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -123,6 +123,36 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = { {0, NULL} }; +/** + * __ew32_prepare - prepare to write to MAC CSR register on certain parts + * @hw: pointer to the HW structure + * + * When updating the MAC CSR registers, the Manageability Engine (ME) could + * be accessing the registers at the same time. Normally, this is handled in + * h/w by an arbiter but on some parts there is a bug that acknowledges Host + * accesses later than it should which could result in the register to have + * an incorrect value. Workaround this by checking the FWSM register which + * has bit 24 set while ME is accessing MAC CSR registers, wait if it is set + * and try again a number of times. + **/ +s32 __ew32_prepare(struct e1000_hw *hw) +{ + s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT; + + while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i) + udelay(50); + + return i; +} + +void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val) +{ + if (hw->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + __ew32_prepare(hw); + + writel(val, hw->hw_addr + reg); +} + /** * e1000_regdump - register printout routine * @hw: pointer to the HW structure From 18cae6f7bb65bdb272f844525f7acd6d464a8541 Mon Sep 17 00:00:00 2001 From: Todd Fujinaka Date: Thu, 8 May 2014 23:20:24 +0000 Subject: [PATCH 13/15] igb: remove redundant PHY power down register write One of the registers used to power down the PHY was found to be wrong (should be bit 2 not bit 1) on further inspection it was also found to be redundant. Signed-off-by: Todd Fujinaka Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/e1000_phy.c | 14 -------------- drivers/net/ethernet/intel/igb/e1000_phy.h | 1 - 2 files changed, 15 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c index 424f16c43759b..c1bb64d8366fa 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -2204,16 +2204,10 @@ s32 igb_phy_init_script_igp3(struct e1000_hw *hw) void igb_power_up_phy_copper(struct e1000_hw *hw) { u16 mii_reg = 0; - u16 power_reg = 0; /* The PHY will retain its settings across a power down/up cycle */ hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); mii_reg &= ~MII_CR_POWER_DOWN; - if (hw->phy.type == e1000_phy_i210) { - hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg); - power_reg &= ~GS40G_CS_POWER_DOWN; - hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg); - } hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); } @@ -2227,18 +2221,10 @@ void igb_power_up_phy_copper(struct e1000_hw *hw) void igb_power_down_phy_copper(struct e1000_hw *hw) { u16 mii_reg = 0; - u16 power_reg = 0; /* The PHY will retain its settings across a power down/up cycle */ hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); mii_reg |= MII_CR_POWER_DOWN; - - /* i210 Phy requires an additional bit for power up/down */ - if (hw->phy.type == e1000_phy_i210) { - hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg); - power_reg |= GS40G_CS_POWER_DOWN; - hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg); - } hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); usleep_range(1000, 2000); } diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h index fe921e29dda8f..7af4ffab02856 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.h +++ b/drivers/net/ethernet/intel/igb/e1000_phy.h @@ -151,7 +151,6 @@ s32 igb_check_polarity_m88(struct e1000_hw *hw); #define GS40G_MAC_LB 0x4140 #define GS40G_MAC_SPEED_1G 0X0006 #define GS40G_COPPER_SPEC 0x0010 -#define GS40G_CS_POWER_DOWN 0x0002 #define GS40G_LINE_LB 0x4000 /* SFP modules ID memory locations */ From 9760822b0d386c485bd45d558d83cc40fd21bea7 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Tue, 20 May 2014 08:22:55 +0000 Subject: [PATCH 14/15] e1000: Use is_broadcast_ether_addr/is_multicast_ether_addr helpers Use the is_broadcast_ether_addr/is_multicast_ether_addr helper functions from linux/etherdevice.h instead of open coding them. Signed-off-by: Tobias Klauser Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000_hw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c index c1d3fdb296a05..e9b07ccc0ebae 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_hw.c +++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c @@ -4877,10 +4877,10 @@ void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, * since the test for a multicast frame will test positive on * a broadcast frame. */ - if ((mac_addr[0] == (u8) 0xff) && (mac_addr[1] == (u8) 0xff)) + if (is_broadcast_ether_addr(mac_addr)) /* Broadcast packet */ stats->bprc++; - else if (*mac_addr & 0x01) + else if (is_multicast_ether_addr(mac_addr)) /* Multicast packet */ stats->mprc++; From dc5f2de6f8f64f97f3cb7edfe6aed34801e358d8 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Tue, 20 May 2014 08:23:06 +0000 Subject: [PATCH 15/15] i40evf: Use is_multicast_ether_addr helper Use the is_multicast_ether_addr helper function from linux/etherdevice.h instead of open coding the multicast address check. Signed-off-by: Tobias Klauser Tested-by: Sibai Li Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 8dbaa77984859..23c9ff6698bca 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -845,7 +845,7 @@ static void i40evf_set_rx_mode(struct net_device *netdev) list_for_each_entry_safe(f, ftmp, &adapter->mac_filter_list, list) { bool found = false; - if (f->macaddr[0] & 0x01) { + if (is_multicast_ether_addr(f->macaddr)) { netdev_for_each_mc_addr(mca, netdev) { if (ether_addr_equal(mca->addr, f->macaddr)) { found = true;